Sfoglia il codice sorgente

Add a second TPMS-specific mode.

antirez 3 anni fa
parent
commit
f0a2607dd5
2 ha cambiato i file con 49 aggiunte e 2 eliminazioni
  1. 2 1
      app_subghz.c
  2. 47 1
      custom_presets.h

+ 2 - 1
app_subghz.c

@@ -13,7 +13,8 @@ ProtoViewModulation ProtoViewModulations[] = {
     {"2FSK 47.6Khz", FuriHalSubGhzPreset2FSKDev476Async, NULL},
     {"MSK", FuriHalSubGhzPresetMSK99_97KbAsync, NULL},
     {"GFSK", FuriHalSubGhzPresetGFSK9_99KbAsync, NULL},
-    {"FSK for TPMS", 0, (uint8_t*)protoview_subghz_tpms_async_regs},
+    {"TPMS FSK 28.56Khz", 0, (uint8_t*)protoview_subghz_tpms1_async_regs},
+    {"TPMS FSK 47.6Khz", 0, (uint8_t*)protoview_subghz_tpms2_async_regs},
     {NULL, 0, NULL} /* End of list sentinel. */
 };
 

+ 47 - 1
custom_presets.h

@@ -1,6 +1,7 @@
 #include <cc1101.h>
 
-static uint8_t protoview_subghz_tpms_async_regs[][2] = {
+/* 20 KBaud, 2FSK, 28.56 kHz deviation, 325 Khz bandwidth filter. */
+static uint8_t protoview_subghz_tpms1_async_regs[][2] = {
     /* GPIO GD0 */
     {CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
 
@@ -44,3 +45,48 @@ static uint8_t protoview_subghz_tpms_async_regs[][2] = {
     {0, 0},
 };
 
+/* 20 KBaud, 2FSK, 44.60 kHz deviation, 270 Khz bandwidth filter. */
+static uint8_t protoview_subghz_tpms2_async_regs[][2] = {
+    /* GPIO GD0 */
+    {CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
+
+    /* Frequency Synthesizer Control */
+    {CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
+
+    /* Packet engine */
+    {CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
+    {CC1101_PKTCTRL1, 0x04},
+
+    // // Modem Configuration
+    {CC1101_MDMCFG0, 0x00},
+    {CC1101_MDMCFG1, 0x02},
+    {CC1101_MDMCFG2, 0x04}, // Format 2-FSK/FM, No preamble/sync, Disable (current optimized). Other code reading TPMS uses GFSK, but should be the same when in RX mode.
+    {CC1101_MDMCFG3, 0x93}, // Data rate is 20kBaud
+    {CC1101_MDMCFG4, 0x67}, // Rx BW filter is 270.833333 kHz
+    {CC1101_DEVIATN, 0x47}, // Deviation 47.60742 kHz
+
+    /* Main Radio Control State Machine */
+    {CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
+
+    /* Frequency Offset Compensation Configuration */
+    {CC1101_FOCCFG,
+     0x16}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
+
+    /* Automatic Gain Control */
+    {CC1101_AGCCTRL0,
+     0x91}, //10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
+    {CC1101_AGCCTRL1,
+     0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
+    {CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
+
+    /* Wake on radio and timeouts control */
+    {CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
+
+    /* Frontend configuration */
+    {CC1101_FREND0, 0x10}, // Adjusts current TX LO buffer
+    {CC1101_FREND1, 0x56},
+
+    /* End  */
+    {0, 0},
+};
+