pihole_ynh/scripts/restore

#!/bin/bash

#=================================================
# GENERIC START
#=================================================
# IMPORT GENERIC HELPERS
#=================================================

# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
source ../settings/scripts/_common.sh
source /usr/share/yunohost/helpers

#=================================================
# MANAGE SCRIPT FAILURE
#=================================================

ynh_clean_setup () {
	true
}
# Exit if an error occurs during the execution of the script
ynh_abort_if_errors

#=================================================
# LOAD SETTINGS
#=================================================
ynh_script_progression --message="Loading installation settings..." --weight=2

app=$YNH_APP_INSTANCE_NAME

domain=$(ynh_app_setting_get --app=$app --key=domain)
path_url=$(ynh_app_setting_get --app=$app --key=path)
final_path=$(ynh_app_setting_get --app=$app --key=final_path)
enable_dhcp=$(ynh_app_setting_get --app=$app --key=enable_dhcp)
admin=$(ynh_app_setting_get --app=$app --key=admin)

# Get variables from ynh_add_fpm_config
fpm_footprint=$(ynh_app_setting_get --app=$app --key=fpm_footprint)
fpm_usage=$(ynh_app_setting_get --app=$app --key=fpm_usage)
fpm_config_dir=$(ynh_app_setting_get --app=$app --key=fpm_config_dir)

#=================================================
# CHECK IF THE APP CAN BE RESTORED
#=================================================
ynh_script_progression --message="Validating restoration parameters..." --weight=1

test ! -d $final_path \
	|| ynh_die --message="There is already a directory: $final_path "

#=================================================
# FIND AND OPEN A PORT
#=================================================
ynh_script_progression --message="Finding an available port..." --weight=12

# Find an available port
port=$(ynh_find_port --port=4711)
if [ $port -gt 4720 ]
then
	ynh_die --message="The ports 4711 to 4720 are already in use. Pi-hole can't work on another port. Please try to free one of these ports."
fi
ynh_app_setting_set --app=$app --key=port --value=$port

# Disable the port 53 for upnp
ynh_exec_fully_quiet yunohost firewall disallow Both 53 --no-reload
ynh_exec_fully_quiet yunohost firewall allow Both 53 --no-upnp

# Open the UDP port 67 for dhcp
ynh_exec_fully_quiet yunohost firewall allow UDP 67 --no-upnp

#=================================================
# ACTIVATE MAINTENANCE MODE
#=================================================
ynh_script_progression --message="Activating maintenance mode..." --weight=2

ynh_maintenance_mode_ON

#=================================================
# STANDARD RESTORATION STEPS
#=================================================
# RECREATE THE DEDICATED USER
#=================================================
ynh_script_progression --message="Recreating the dedicated system user..." --weight=2

# Create the dedicated user (if not existing)
ynh_system_user_create --username=$app --home_dir="$final_path"

#=================================================
# RESTORE THE APP MAIN DIR
#=================================================
ynh_script_progression --message="Restoring the app main directory..." --weight=1

ynh_restore_file --origin_path="$final_path"

chmod 750 "$final_path"
chmod -R o-rwx "$final_path"
chown -R $app:www-data "$final_path"

#=================================================
# SPECIFIC RESTORATION
#=================================================
# REINSTALL DEPENDENCIES
#=================================================
ynh_script_progression --message="Reinstalling dependencies..." --weight=12

# Define and install dependencies
ynh_install_app_dependencies $pkg_dependencies

#=================================================
# RESTORE THE PHP-FPM CONFIGURATION
#=================================================
ynh_script_progression --message="Restoring the PHP-FPM configuration..." --weight=7

# Restore the file first, so it can have a backup if different
ynh_restore_file --origin_path="$fpm_config_dir/php-fpm-$app.conf"
ynh_restore_file --origin_path="$fpm_config_dir/pool.d/$app.conf"

# Recreate a dedicated php-fpm config
#ynh_add_fpm_config --usage=$fpm_usage --footprint=$fpm_footprint

#=================================================
# RESTORE THE NGINX CONFIGURATION
#=================================================
ynh_script_progression --message="Restoring the NGINX web server configuration..." --weight=1

ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"

#=================================================
# RESTORE SPECIFIC FILES
#=================================================
ynh_script_progression --message="Restoring specific files..." --weight=1

ynh_restore_file --origin_path="$PI_HOLE_LOCAL_REPO"

ynh_restore_file --origin_path="$PI_HOLE_CONFIG_DIR"
# Restore permissions on app files
chown $app: -R "$PI_HOLE_CONFIG_DIR"
# $PI_HOLE_CONFIG_DIR/logrotate have to belong to root, otherwise logrotate will failed silently...
chown root: -R "$PI_HOLE_CONFIG_DIR/logrotate"

ynh_restore_file --origin_path="$PI_HOLE_INSTALL_DIR"

ynh_restore_file --origin_path="$PI_HOLE_BIN_DIR/pihole"
ynh_restore_file --origin_path="/etc/bash_completion.d/pihole"

ynh_restore_file --origin_path="/etc/init.d/pihole-FTL"
ynh_restore_file --origin_path="/usr/bin/pihole-FTL"
install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.service" "/etc/init.d/pihole-FTL"

ynh_restore_file --origin_path="/etc/sudoers.d/pihole"

#=================================================
# RESTORE THE CRON FILE
#=================================================
ynh_script_progression --message="Restoring the cron file..." --weight=1

ynh_restore_file --origin_path="/etc/cron.d/pihole"

#=================================================
# DISABLING DNSMASQ
#=================================================
ynh_script_progression --message="Disabling DNSMASQ..." --weight=1

# Last version available
# Stopped dnsmasq to replace it by pihole-FTL
ynh_systemd_action --service_name=dnsmasq --action=stop

# Disable the real dnsmasq service
#ynh_exec_warn_less systemctl disable dnsmasq --quiet

#=================================================
# FINAL EXPORTS
#=================================================
ynh_script_progression --message="Final exports..." --weight=1

setupVars="$PI_HOLE_CONFIG_DIR/setupVars.conf"

# Get the default network interface
main_iface=$(ip route | grep --max-count=1 default | awk '{print $5;}')
echo "PIHOLE_INTERFACE=$main_iface" > $setupVars
ynh_replace_string --match_string="^PIHOLE_INTERFACE=.*" --replace_string="PIHOLE_INTERFACE=$main_iface" --target_file=$setupVars
ynh_replace_string --match_string="^IPV4_ADDRESS=.*" --replace_string="IPV4_ADDRESS=127.0.0.1" --target_file=$setupVars

# Calculate and store the config file checksum into the app settings
ynh_store_file_checksum --file="$setupVars"

#=================================================
# ENABLING FTL
#=================================================
ynh_script_progression --message="Enable FTL..." --weight=1

ynh_exec_warn_less systemctl enable pihole-FTL --quiet

# Replace the service dnsmasq by pihole-FTL
# That way, YunoHost can continue to use dnsmasq by actually using pihole-FTL
#ln -sf /run/systemd/generator.late/pihole-FTL.service /etc/systemd/system/dnsmasq.service
systemctl mask dnsmasq.service

# Reload systemd config
systemctl daemon-reload

#=================================================
# RECREATE LOG FILES
#=================================================
ynh_script_progression --message="Recreate log files..." --weight=1

touch /var/log/{pihole,pihole-FTL}.log
chmod 644 /var/log/{pihole,pihole-FTL}.log
dnsmasq_user=$(grep DNSMASQ_USER= /etc/init.d/dnsmasq | cut -d'"' -f2)
chown $dnsmasq_user:root /var/log/{pihole,pihole-FTL}.log

#=================================================
# CONFIGURE DNS FOR THE LOCAL DOMAINS
#=================================================
ynh_script_progression --message="Configuring DNS for the local domains..." --weight=2

# Find the IP associated to the network interface
localipv4=$(ip address | grep "${main_iface}\$" | awk '{print $2;}' | cut -d/ -f1)

# List all YunoHost domains
while read perdomain
do
	# Comment domain resolution in /etc/hosts on 127.0.0.1, because they can interfere with the local network resolution.
	ynh_replace_string --match_string="^127.0.0.1.*$perdomain" --replace_string="#Commented by pihole# &" --target_file=/etc/hosts

	# And add a resolution on the local IP instead
	grep -q "^$localipv4.*$perdomain" /etc/hosts || \
		echo "$localipv4	$perdomain #Added by pihole#" >> /etc/hosts
done <<< "$(yunohost domain list | grep "\." | sed 's/.*: \|.*- //')"

#=================================================
# SET UP CONF_REGEN HOOK
#=================================================
ynh_script_progression --message="Setting up conf_regen hook..." --weight=1

test -e "${YNH_APP_BACKUP_DIR}/etc/dnsmasq.d/03-pihole-wildcard.conf" && ynh_restore_file --origin_path="/etc/dnsmasq.d/03-pihole-wildcard.conf"

ynh_restore_file --origin_path="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"

systemctl daemon-reload
ynh_exec_warn_less yunohost tools regen-conf dnsmasq

#=================================================
# INTEGRATE SERVICE IN YUNOHOST
#=================================================
ynh_script_progression --message="Integrating service in YunoHost..." --weight=1

yunohost service add pihole-FTL --description="PiHole backend service" --log="/var/log/pihole-FTL.log" --needs_exposed_ports 53 67

#=================================================
# START SYSTEMD SERVICE
#=================================================
ynh_script_progression --message="Starting a systemd service..." --weight=2

ynh_systemd_action --service_name=pihole-FTL --action=restart --log_path="/var/log/pihole-FTL.log"

#=================================================
# GENERIC FINALIZATION
#=================================================
# RELOAD NGINX AND PHP-FPM
#=================================================
ynh_script_progression --message="Reloading NGINX web server and PHP-FPM..." --weight=1

ynh_systemd_action --service_name=php$phpversion-fpm --action=reload
ynh_systemd_action --service_name=nginx --action=reload

#=================================================
# DEACTIVE MAINTENANCE MODE
#=================================================
ynh_script_progression --message="Disabling maintenance mode..." --weight=4

ynh_maintenance_mode_OFF

#=================================================
# SEND A README FOR THE ADMIN
#=================================================

# Get main domain and buid the URL of the admin panel of the app.
admin_panel="https://$(grep portal_domain /etc/ssowat/conf.json | cut -d'"' -f4)/yunohost/admin/#/apps/$app"

if [ $enable_dhcp -eq 1 ]
then
	dhcp_alert="You asked to use the internal DHCP server of Dnsmasq with Pi-hole.
You should really read the __URL_TAG1__documentation about that__URL_TAG2__https://github.com/YunoHost-Apps/pihole_ynh/blob/master/dhcp.md__URL_TAG3__

"
else
	dhcp_alert=""
fi

echo "${dhcp_alert}You can configure this app easily by using the experimental __URL_TAG1__config-panel feature__URL_TAG2__$admin_panel/config-panel__URL_TAG3__.
You can also find some specific actions for this app by using the experimental __URL_TAG1__action feature__URL_TAG2__$admin_panel/actions__URL_TAG3__.

If you're facing an issue or want to improve this app, please open a new issue in this __URL_TAG1__project__URL_TAG2__https://github.com/YunoHost-Apps/pihole_ynh__URL_TAG3__." > mail_to_send

ynh_send_readme_to_admin --app_message="mail_to_send" --recipients="$admin" --type=restore

#=================================================
# END OF SCRIPT
#=================================================

ynh_script_progression --message="Restoration completed for $app" --last