Merge pull request #120 from YunoHost-Apps/manifestv2

ManifestV2

.github/workflows/updater.sh

@@ -1,151 +0,0 @@
-#!/bin/bash
-
-#=================================================
-# PACKAGE UPDATING HELPER
-#=================================================
-
-# This script is meant to be run by GitHub Actions
-# The YunoHost-Apps organisation offers a template Action to run this script periodically
-# Since each app is different, maintainers can adapt its contents so as to perform
-# automatic actions when a new upstream release is detected.
-
-#=================================================
-# FETCHING LATEST RELEASE AND ITS ASSETS
-#=================================================
-
-# Fetching information
-current_version=$(cat manifest.json | jq -j '.version|split("~")[0]')
-repo=$(cat manifest.json | jq -j '.upstream.code|split("https://github.com/")[1]')
-# Some jq magic is needed, because the latest upstream release is not always the latest version (e.g. security patches for older versions)
-version=$(curl --silent "https://api.github.com/repos/$repo/releases" | jq -r '.[] | select( .prerelease != true ) | .tag_name' | sort -V | tail -1)
-version_adminlte=$(curl --silent "https://api.github.com/repos/pi-hole/web/releases" | jq -r '.[] | select( .prerelease != true ) | .tag_name' | sort -V | tail -1)
-version_ftl=$(curl --silent "https://api.github.com/repos/pi-hole/FTL/releases" | jq -r '.[] | select( .prerelease != true ) | .tag_name' | sort -V | tail -1)
-assets[0]="https://github.com/pi-hole/pi-hole/archive/$version.tar.gz"
-assets[1]="https://github.com/pi-hole/web/archive/$version_adminlte.tar.gz"
-assets[2]="https://github.com/pi-hole/FTL/archive/$version_ftl.tar.gz"
-
-# Later down the script, we assume the version has only digits and dots
-# Sometimes the release name starts with a "v", so let's filter it out.
-# You may need more tweaks here if the upstream repository has different naming conventions.
-if [[ ${version:0:1} == "v" || ${version:0:1} == "V" ]]; then
-	version=${version:1}
-fi
-if [[ ${version_adminlte:0:1} == "v" || ${version_adminlte:0:1} == "V" ]]; then
-	version_adminlte=${version_adminlte:1}
-fi
-if [[ ${version_ftl:0:1} == "v" || ${version_ftl:0:1} == "V" ]]; then
-	version_ftl=${version_ftl:1}
-fi
-
-# Setting up the environment variables
-echo "Current version: $current_version"
-echo "Latest release from upstream: $version"
-echo "VERSION=$version" >> $GITHUB_ENV
-echo "REPO=$repo" >> $GITHUB_ENV
-# For the time being, let's assume the script will fail
-echo "PROCEED=false" >> $GITHUB_ENV
-
-# Proceed only if the retrieved version is greater than the current one
-if ! dpkg --compare-versions "$current_version" "lt" "$version" ; then
-	echo "::warning ::No new version available"
-	exit 0
-# Proceed only if a PR for this new version does not already exist
-elif git ls-remote -q --exit-code --heads https://github.com/$GITHUB_REPOSITORY.git ci-auto-update-v$version ; then
-	echo "::warning ::A branch already exists for this update"
-	exit 0
-fi
-
-# Each release can hold multiple assets (e.g. binaries for different architectures, source code, etc.)
-echo "${#assets[@]} available asset(s)"
-
-#=================================================
-# UPDATE SOURCE FILES
-#=================================================
-
-# Here we use the $assets variable to get the resources published in the upstream release.
-# Here is an example for Grav, it has to be adapted in accordance with how the upstream releases look like.
-
-# Let's loop over the array of assets URLs
-for asset_url in ${assets[@]}; do
-
-	echo "Handling asset at $asset_url"
-
-	# Assign the asset to a source file in conf/ directory
-	# Here we base the source file name upon a unique keyword in the assets url (admin vs. update)
-	# Leave $src empty to ignore the asset
-	case $asset_url in
-		*"FTL"*)
-			src="pi-hole_FTL"
-			;;
-		*"web"*)
-			src="pi-hole_AdminLTE"
-			;;
-		*"pi-hole"*)
-			src="pi-hole_Core"
-			;;
-		*)
-			src=""
-		;;
-	esac
-
-	# If $src is not empty, let's process the asset
-	if [ ! -z "$src" ]; then
-
-		# Create the temporary directory
-		tempdir="$(mktemp -d)"
-
-		# Download sources and calculate checksum
-		filename=${asset_url##*/}
-		curl --silent -4 -L $asset_url -o "$tempdir/$filename"
-		checksum=$(sha256sum "$tempdir/$filename" | head -c 64)
-
-		# Delete temporary directory
-		rm -rf $tempdir
-
-		# Get extension
-		if [[ $filename == *.tar.gz ]]; then
-			extension=tar.gz
-		else
-			extension=${filename##*.}
-		fi
-
-		# Rewrite source file
-		cat <<EOT > conf/$src.src
-SOURCE_URL=$asset_url
-SOURCE_SUM=$checksum
-SOURCE_SUM_PRG=sha256sum
-SOURCE_FORMAT=$extension
-SOURCE_IN_SUBDIR=true
-SOURCE_FILENAME=
-SOURCE_EXTRACT=true
-EOT
-		echo "... conf/$src.src updated"
-
-	else
-		echo "... asset ignored"
-	fi
-
-done
-
-#=================================================
-# SPECIFIC UPDATE STEPS
-#=================================================
-
-# Any action on the app's source code can be done.
-# The GitHub Action workflow takes care of committing all changes after this script ends.
-
-sed -i "/pihole_adminlte_version/c\pihole_adminlte_version=$version_adminlte" scripts/_common.sh
-sed -i "/pihole_flt_version/c\pihole_flt_version=$version_ftl" scripts/_common.sh
-
-#=================================================
-# GENERIC FINALIZATION
-#=================================================
-
-# Replace new version in manifest
-echo "$(jq -s --indent 4 ".[] | .version = \"$version~ynh1\"" manifest.json)" > manifest.json
-
-# No need to update the README, yunohost-bot takes care of it
-
-# The Action will proceed only if the PROCEED environment variable is set to true
-echo "PROCEED=true" >> $GITHUB_ENV
-exit 0

.github/workflows/updater.yml

@@ -1,49 +0,0 @@
-# This workflow allows GitHub Actions to automagically update your app whenever a new upstream release is detected.
-# You need to enable Actions in your repository settings, and fetch this Action from the YunoHost-Apps organization.
-# This file should be enough by itself, but feel free to tune it to your needs.
-# It calls updater.sh, which is where you should put the app-specific update steps.
-name: Check for new upstream releases
-on:
-  # Allow to manually trigger the workflow
-  workflow_dispatch:
-  # Run it every day at 6:00 UTC
-  schedule:
-    - cron:  '0 6 * * *'
-jobs:
-  updater:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Fetch the source code
-        uses: actions/checkout@v3
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }}
-      - name: Run the updater script
-        id: run_updater
-        run: |
-          # Setting up Git user
-          git config --global user.name 'yunohost-bot'
-          git config --global user.email 'yunohost-bot@users.noreply.github.com'
-          # Run the updater script
-          /bin/bash .github/workflows/updater.sh
-      - name: Commit changes
-        id: commit
-        if: ${{ env.PROCEED == 'true' }}
-        run: |
-          git commit -am "Upgrade to v$VERSION"
-      - name: Create Pull Request
-        id: cpr
-        if: ${{ env.PROCEED == 'true' }}
-        uses: peter-evans/create-pull-request@v4
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }}
-          commit-message: Update to version ${{ env.VERSION }}
-          committer: 'yunohost-bot <yunohost-bot@users.noreply.github.com>'
-          author: 'yunohost-bot <yunohost-bot@users.noreply.github.com>'
-          signoff: false
-          base: testing
-          branch: ci-auto-update-v${{ env.VERSION }}
-          delete-branch: true
-          title: 'Upgrade to version ${{ env.VERSION }}'
-          body: |
-            Upgrade to v${{ env.VERSION }}
-          draft: false

check_process

@@ -1,40 +0,0 @@
-;; Test version last version
-    ; Manifest
-        domain="domain.tld"
-        path="/path"
-        admin="john"
-        query_logging=1
-        enable_dhcp=0
-    ; Config_panel
-        main.overwrite_files.overwrite_setupvars=0|1
-        main.overwrite_files.overwrite_ftl=0|1
-        main.overwrite_files.overwrite_nginx=0|1
-        main.overwrite_files.overwrite_phpfpm=0|1
-        main.global_config.email_type=0|1
-        main.php_fpm_config.footprint=low|medium|high
-        main.php_fpm_config.free_footprint=20
-        main.php_fpm_config.usage=low|medium|high
-        main.php_fpm_config.force_max_children=20|0
-    ; Checks
-        pkg_linter=1
-        setup_sub_dir=1
-        setup_root=1
-        setup_nourl=0
-        setup_private=1
-        setup_public=0
-        upgrade=1
-        # 5.11.4~ynh1
-        upgrade=1   from_commit=3d2f68c4e19f335e63f8ffa259708b38a58c8f67
-        upgrade=1   from_commit=4999654987af8b1427a6c72f8af482b235bb46db
-        backup_restore=1
-        multi_instance=0
-        port_already_use=0
-        change_url=1
-        actions=0
-        config_panel=0
-;;; Options
-Email=
-Notification=none
-;;; Upgrade options
-    ; commit=4999654987af8b1427a6c72f8af482b235bb46db
-        name=Merge pull request #88

conf/nginx.conf

@@ -2,7 +2,7 @@
 location __PATH__/ {
 
   # Path to source
-  alias __FINALPATH__/;
+  alias __INSTALL_DIR__/web/;
 
   index index.html index.php;
 

conf/pi-hole_AdminLTE.src

@@ -1,7 +0,0 @@
-SOURCE_URL=https://github.com/pi-hole/AdminLTE/archive/v5.18.tar.gz
-SOURCE_SUM=563d3568f9b4c8bf09c6a7a21995c1827f3438edd17e5e2b55ead873599580c0
-SOURCE_SUM_PRG=sha256sum
-SOURCE_FORMAT=tar.gz
-SOURCE_IN_SUBDIR=true
-SOURCE_FILENAME=
-SOURCE_EXTRACT=true

conf/pi-hole_Core.src

@@ -1,7 +0,0 @@
-SOURCE_URL=https://github.com/pi-hole/pi-hole/archive/v5.14.2.tar.gz
-SOURCE_SUM=fb2bf933eb7dc54de7b5ab220458e0298fb48fa84d5cba1bcb3c72c47bee1051
-SOURCE_SUM_PRG=sha256sum
-SOURCE_FORMAT=tar.gz
-SOURCE_IN_SUBDIR=true
-SOURCE_FILENAME=
-SOURCE_EXTRACT=true

conf/pi-hole_FTL.src

@@ -1,7 +0,0 @@
-SOURCE_URL=https://github.com/pi-hole/FTL/archive/v5.20.tar.gz
-SOURCE_SUM=c098d65ed7e59865b814d64a0a5fac65914ce93277e69ef97ab87e8479731fc9
-SOURCE_SUM_PRG=sha256sum
-SOURCE_FORMAT=tar.gz
-SOURCE_IN_SUBDIR=true
-SOURCE_FILENAME=
-SOURCE_EXTRACT=true

conf/setupVars.conf

@@ -0,0 +1,8 @@
+PIHOLE_INTERFACE=__MAIN_IFACE__
+IPV4_ADDRESS=127.0.0.1
+IPV6_ADDRESS=::1
+PIHOLE_DNS_1=
+PIHOLE_DNS_2=
+QUERY_LOGGING=__QUERY_LOGGING_STR__
+INSTALL_WEB=true
+BLOCKING_ENABLED=true

doc/DISCLAIMER.md → doc/ADMIN.md

@@ -9,16 +9,18 @@ Use the admin panel of your Pi-hole to configure this app. You may also need to
 ## Using Pi-hole as your DHCP server
 
 > **Be careful, you should considering that playing with your DHCP may break your network.  
-In case your server is down, you will lose your dns resolution and ip address.  
-So, you will lose any internet connection and even the connection to your router.**
-
+> In case your server is down, you will lose your dns resolution and ip address.  
+> So, you will lose any internet connection and even the connection to your router.**
+>
 > **If you encounter this kind of problem, please see "How to restore my network" at the end of this document.**
 
 ### How to configure Pi-hole
 
 There're two ways to configure Pi-hole to be used as your DHCP server.
+
 - Either you can choose to use it when you install the app.
 - Or you can activate the DHCP server afterwards in the "Settings" tab, "Pi-hole DHCP Server" part.  
+
 In this second case, it can be better to set the ip of the server to a static address
 
 ### How to configure my router
@@ -43,19 +45,22 @@ Don't panic, We'll get through it. \o/
 
 Use your favorite terminal on your desktop computer.  
 And first, get your main interface (usually `eth0`).
+
 ``` bash
 sudo ifconfig
 ```
 
 Then, set your ip as a static ip.
+
 ``` bash
 sudo ifconfig eth0 192.168.1.100
 ```
 
 Now, you can connect to your router and turn on its DHCP server to use it again.  
 You can now reset your ip and get a dynamic address.
+
 ``` bash
 sudo ifconfig eth0 0.0.0.0 && sudo dhclient eth0
 ```
 
-> Don't forget to turn off the DHCP of your router if your server is working again.
+> Don't forget to turn off the DHCP of your router if your server is working again.

doc/DISCLAIMER_fr.md → doc/ADMIN_fr.md

@@ -9,16 +9,18 @@ Utiliser le panneau d'administration de votre Pi-hole pour configurer cette appl
 ## Faire de Pi-hole votre serveur DHCP
 
 > **Attention, vous devez savoir que toucher à votre DHCP pourrait casser votre réseau.  
-Dans le cas où votre serveur serait inaccessible, vous perdriez votre résolution dns et votre adresse IP.  
-Ainsi, vous perdriez toute connexion à internet et même la connexion à votre routeur.**
-
+> Dans le cas où votre serveur serait inaccessible, vous perdriez votre résolution dns et votre adresse IP.  
+> Ainsi, vous perdriez toute connexion à internet et même la connexion à votre routeur.**
+>
 > **Si vous rencontrez ce genre de problèmes, merci de lire la section "Comment restaurer mon réseau" à la fin de ce document.**
 
 ### Comment configurer Pi-hole
 
 Il y a 2 manière de configurer Pi-hole pour qu'il soit utilisé comme votre serveur DHCP.
+
 - Soit vous pouvez choisir de l'utiliser lorsque vous installez l'application.
 - Soit vous pouvez activer le serveur DHCP par la suite dans l'onglet "Settings", partie "Pi-hole DHCP Server".  
+
 Dans ce second cas, il peut être préférable de forcer l'ip du serveur à une adresse statique.
 
 ### Comment configurer mon routeur
@@ -43,17 +45,20 @@ Ne paniquez pas, on va surmonter ça \o/
 
 Utilisez votre terminal favori sur votre ordinateur de bureau.  
 Et tout d'abord, récupérer votre interface réseau (Le plus souvent `eth0`).
+
 ``` bash
 sudo ifconfig
 ```
 
 Ensuite, changer votre ip pour une ip statique.
+
 ``` bash
 sudo ifconfig eth0 192.168.1.100
 ```
 
 Maintenant, vous pouvez vous connecter à votre routeur et rallumer son serveur DHCP pour l'utiliser à nouveau.  
 Vous pouvez maintenant retirer votre ip statique et réobtenir une ip dynamique.
+
 ``` bash
 sudo ifconfig eth0 0.0.0.0 && sudo dhclient eth0
 ```

manifest.json

@@ -1,80 +0,0 @@
-{
-    "name": "Pi-hole",
-    "id": "pihole",
-    "packaging_format": 1,
-    "description": {
-        "en": "Network-wide ad blocking via your own DNS server",
-        "fr": "Filtrage publicitaire via votre propre serveur DNS"
-    },
-    "version": "5.14.2~ynh4",
-    "url": "https://pi-hole.net/",
-    "upstream": {
-        "license": "EUPL-1.2",
-        "website": "https://pi-hole.net/",
-        "admindoc": "https://docs.pi-hole.net",
-        "code": "https://github.com/pi-hole/pi-hole"
-    },
-    "license": "EUPL-1.2",
-    "maintainer": {
-        "name": "",
-        "email": ""
-    },
-    "previous_maintainers": [
-        {
-            "name": "Maniack Crudelis",
-            "email": "maniackc_dev@crudelis.fr"
-        }
-    ],
-    "requirements": {
-        "yunohost": ">= 11.2.4"
-    },
-    "multi_instance": false,
-    "services": [
-        "nginx",
-        "php7.4-fpm"
-    ],
-    "arguments": {
-        "install": [
-            {
-                "name": "domain",
-                "type": "domain"
-            },
-            {
-                "name": "path",
-                "type": "path",
-                "example": "/pihole",
-                "default": "/pihole"
-            },
-            {
-                "name": "admin",
-                "type": "user"
-            },
-            {
-                "name": "query_logging",
-                "type": "boolean",
-                "ask": {
-                    "en": "Do you want to log DNS queries?",
-                    "fr": "Voulez-vous enregistrer les requêtes DNS ?"
-                },
-                "help": {
-                    "en": "Keeping this option deactivate will render graphs on the admin page useless. But will respect the privacy of the other users.",
-                    "fr": "Garder cette option désactivée rendra les graphiques sur la page d'administration inutiles. Mais respectera la vie privée des autres utilisateurs."
-                },
-                "default": false
-            },
-            {
-                "name": "enable_dhcp",
-                "type": "boolean",
-                "ask": {
-                    "en": "Do you want to set Pi-Hole as your DHCP server?",
-                    "fr": "Voulez-vous utiliser Pi-Hole an tant que serveur DHCP ?"
-                },
-                "help": {
-                    "en": "If you want to do that, <a href=https://github.com/YunoHost-Apps/pihole_ynh/blob/master/dhcp.md target=_blank>you really have to read this before</a>!",
-                    "fr": "Si vous voulez faire ça, <a href=https://github.com/YunoHost-Apps/pihole_ynh/blob/master/dhcp.md target=_blank>vous devez vraiment lire cela avant</a> !"
-                },
-                "default": false
-            }
-        ]
-    }
-}

manifest.toml

@@ -0,0 +1,115 @@
+#:schema https://raw.githubusercontent.com/YunoHost/apps/master/schemas/manifest.v2.schema.json
+
+packaging_format = 2
+
+id = "pihole"
+name = "Pi-hole"
+description.en = "Network-wide ad blocking via your own DNS server"
+description.fr = "Filtrage publicitaire via votre propre serveur DNS"
+
+version = "5.14.2~ynh4"
+
+maintainers = []
+
+[upstream]
+license = "EUPL-1.2"
+website = "https://pi-hole.net/"
+admindoc = "https://docs.pi-hole.net"
+code = "https://github.com/pi-hole/pi-hole"
+fund = "https://pi-hole.net/donate/#donate"
+
+[integration]
+yunohost = ">= 11.2.4"
+architectures = "all"
+multi_instance = false
+ldap = "not_relevant"
+sso = "not_relevant"
+disk = "50M" # FIXME: replace with an **estimate** minimum disk requirement. e.g. 20M, 400M, 1G, ...
+ram.build = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ...
+ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ...
+
+[install]
+    [install.domain]
+    type = "domain"
+
+    [install.path]
+    type = "path"
+    default = "/pihole"
+
+    [install.query_logging]
+    ask.en = "Do you want to log DNS queries?"
+    ask.fr = "Voulez-vous enregistrer les requêtes DNS ?"
+    help.en = "Keeping this option deactivate will render graphs on the admin page useless. But will respect the privacy of the other users."
+    help.fr = "Garder cette option désactivée rendra les graphiques sur la page d'administration inutiles. Mais respectera la vie privée des autres utilisateurs."
+    type = "boolean"
+    default = false
+
+    [install.enable_dhcp]
+    ask.en = "Do you want to set Pi-Hole as your DHCP server?"
+    ask.fr = "Voulez-vous utiliser Pi-Hole an tant que serveur DHCP ?"
+    help.en = "If you want to do that, <a href=https://github.com/YunoHost-Apps/pihole_ynh/blob/master/dhcp.md target=_blank>you really have to read this before</a>!"
+    help.fr = "Si vous voulez faire ça, <a href=https://github.com/YunoHost-Apps/pihole_ynh/blob/master/dhcp.md target=_blank>vous devez vraiment lire cela avant</a> !"
+    type = "boolean"
+    default = false
+
+[resources]
+    [resources.sources]
+    [resources.sources.pi-hole_core]
+    url = "https://github.com/pi-hole/pi-hole/archive/v5.14.2.tar.gz"
+    sha256 = "fb2bf933eb7dc54de7b5ab220458e0298fb48fa84d5cba1bcb3c72c47bee1051"
+
+    autoupdate.upstream = "https://github.com/pi-hole/pi-hole"
+    autoupdate.strategy = "latest_github_release"
+
+    [resources.sources.pi-hole_web]
+    url = "https://github.com/pi-hole/web/archive/v5.18.tar.gz"
+    sha256 = "563d3568f9b4c8bf09c6a7a21995c1827f3438edd17e5e2b55ead873599580c0"
+
+    autoupdate.upstream = "https://github.com/pi-hole/web"
+    autoupdate.strategy = "latest_github_release"
+
+    [resources.sources.pi-hole_ftl]
+    url = "https://github.com/pi-hole/FTL/archive/v5.20.tar.gz"
+    sha256 = "c098d65ed7e59865b814d64a0a5fac65914ce93277e69ef97ab87e8479731fc9"
+
+    autoupdate.upstream = "https://github.com/pi-hole/FTL"
+    autoupdate.strategy = "latest_github_release"
+
+    [resources.system_user]
+
+    [resources.install_dir]
+
+    [resources.permissions]
+    main.url = "/"
+    main.allowed = "admins"
+
+    [resources.ports]
+    main.default = 4711
+
+    [resources.apt]
+    packages = [
+        "php7.4-common",
+        "php7.4-cgi",
+        "php7.4-sqlite3",
+        "php7.4-xml",
+        "php7.4-intl",
+        "cmake",
+        "build-essential",
+        "libgmp-dev",
+        "libidn11-dev",
+        "nettle-dev",
+        "libreadline-dev",
+        "sqlite3",
+        "cron",
+        "curl",
+        "iputils-ping",
+        "psmisc",
+        "unzip",
+        "idn2",
+        "libcap2-bin",
+        "dns-root-data",
+        "libcap2",
+        "netcat-openbsd",
+        "procps",
+        "jq",
+    ]

scripts/_common.sh

@@ -4,40 +4,83 @@
 # COMMON VARIABLES
 #=================================================
 
-YNH_PHP_VERSION="7.4"
-
-php_dependencies="php$YNH_PHP_VERSION-common php$YNH_PHP_VERSION-cgi php$YNH_PHP_VERSION-sqlite3 php$YNH_PHP_VERSION-xml php$YNH_PHP_VERSION-intl"
-
-# dependencies used by the app (must be on a single line)
-pkg_dependencies="cmake build-essential libgmp-dev libidn11-dev nettle-dev libreadline-dev sqlite3 cron curl iputils-ping psmisc unzip idn2 libcap2-bin dns-root-data libcap2 netcat-openbsd procps jq $php_dependencies"
-
 pihole_adminlte_version=5.18
 pihole_flt_version=5.20
 
+# This is hard-coded upstream...
 PI_HOLE_LOCAL_REPO="/etc/.pihole"
 PI_HOLE_INSTALL_DIR="/opt/pihole"
 PI_HOLE_CONFIG_DIR="/etc/pihole"
 PI_HOLE_BIN_DIR="/usr/local/bin"
 
+# Get the default network interface
+main_iface=$(ip route | grep --max-count=1 default | awk '{print $5;}')
+
+# Get the dnsmasq user to set log files permissions
+dnsmasq_user=$(grep DNSMASQ_USER= /etc/init.d/dnsmasq | cut -d'"' -f2)
+
+# Find the IP associated to the network interface
+localipv4=$(ip address | grep "${main_iface}\$" | awk '{print $2;}' | cut -d/ -f1)
+
+if [ "$query_logging" -eq 1 ]; then
+    query_logging_str=true
+else
+    query_logging_str=false
+fi
+
 #=================================================
 # PERSONAL HELPERS
 #=================================================
 
+_configure_ports() {
+    if [ "$port" -gt 4720 ]; then
+        ynh_die --message="The ports 4711 to 4720 are already in use. Pi-hole can't work on another port. Please try to free one of these ports."
+    fi
+
+    # Disable the port 53 for upnp
+    ynh_exec_fully_quiet yunohost firewall disallow Both 53 --no-reload
+    ynh_exec_fully_quiet yunohost firewall allow Both 53 --no-upnp
+
+    # Open the UDP port 67 for dhcp
+    ynh_exec_fully_quiet yunohost firewall allow UDP 67 --no-upnp
+}
+
+_add_cron_jobs() {
+    install -D -m 644 -T -o root -g root "$PI_HOLE_LOCAL_REPO/advanced/Templates/pihole.cron" /etc/cron.d/pihole
+
+    # Randomize gravity update time
+    ynh_replace_string --target_file="/etc/cron.d/pihole" \
+        --match_string="59 1 " \
+        --replace_string="$((1 + RANDOM % 58)) $((3 + RANDOM % 2)) "
+
+    # Randomize update checker time
+    ynh_replace_string --target_file="/etc/cron.d/pihole" \
+        --match_string="59 17" \
+        --replace_string="$((1 + RANDOM % 58)) $((12 + RANDOM % 8))"
+
+    # Remove git usage for version. Which fails because we use here a release instead of master.
+    ynh_replace_string --target_file="/etc/cron.d/pihole" \
+        --match_string=".*updatechecker.*" \
+        --replace_string="#&"
+}
+
+_add_sudoers_config() {
+    install -m 0640 "$PI_HOLE_LOCAL_REPO/advanced/Templates/pihole.sudo" /etc/sudoers.d/pihole
+    echo "$app ALL=NOPASSWD: ${PI_HOLE_BIN_DIR}/pihole" >> /etc/sudoers.d/pihole
+}
+
+_add_logrotate_config() {
+    install -D -m 644 -T "${PI_HOLE_LOCAL_REPO}"/advanced/Templates/logrotate "$PI_HOLE_CONFIG_DIR/logrotate"
+    sed -i "/# su #/d;" "$PI_HOLE_CONFIG_DIR/logrotate"
+}
+
 #=================================================
 # EXPERIMENTAL HELPERS
 #=================================================
 
 ynh_maintenance_mode_ON () {
-	# Load value of $path_url and $domain from the config if their not set
-	if [ -z $path_url ]; then
-		path_url=$(ynh_app_setting_get $app path)
-	fi
-	if [ -z $domain ]; then
-		domain=$(ynh_app_setting_get $app domain)
-	fi
-
 	mkdir -p /var/www/html/
-	
+
 	# Create an html to serve as maintenance notice
 	echo "<!DOCTYPE html>
 <html>
@@ -60,10 +103,10 @@ ynh_maintenance_mode_ON () {
 </html>" > "/var/www/html/maintenance.$app.html"
 
 	# Create a new nginx config file to redirect all access to the app to the maintenance notice instead.
-	echo "# All request to the app will be redirected to ${path_url}_maintenance and fall on the maintenance notice
-rewrite ^${path_url}/(.*)$ ${path_url}_maintenance/? redirect;
+	echo "# All request to the app will be redirected to ${path}_maintenance and fall on the maintenance notice
+rewrite ^${path}/(.*)$ ${path}_maintenance/? redirect;
 # Use another location, to not be in conflict with the original config file
-location ${path_url}_maintenance/ {
+location ${path}_maintenance/ {
 alias /var/www/html/ ;
 
 try_files maintenance.$app.html =503;
@@ -74,7 +117,7 @@ include conf.d/yunohost_panel.conf.inc;
 
 	# The current config file will redirect all requests to the root of the app.
 	# To keep the full path, we can use the following rewrite rule:
-	# 	rewrite ^${path_url}/(.*)$ ${path_url}_maintenance/\$1? redirect;
+	# 	rewrite ^${path}/(.*)$ ${path}_maintenance/\$1? redirect;
 	# The difference will be in the $1 at the end, which keep the following queries.
 	# But, if it works perfectly for a html request, there's an issue with any php files.
 	# This files are treated as simple files, and will be downloaded by the browser.
@@ -84,16 +127,8 @@ include conf.d/yunohost_panel.conf.inc;
 }
 
 ynh_maintenance_mode_OFF () {
-	# Load value of $path_url and $domain from the config if their not set
-	if [ -z $path_url ]; then
-		path_url=$(ynh_app_setting_get $app path)
-	fi
-	if [ -z $domain ]; then
-		domain=$(ynh_app_setting_get $app domain)
-	fi
-
-	# Rewrite the nginx config file to redirect from ${path_url}_maintenance to the real url of the app.
-	echo "rewrite ^${path_url}_maintenance/(.*)$ ${path_url}/\$1 redirect;" > "/etc/nginx/conf.d/$domain.d/maintenance.$app.conf"
+	# Rewrite the nginx config file to redirect from ${path}_maintenance to the real url of the app.
+	echo "rewrite ^${path}_maintenance/(.*)$ ${path}/\$1 redirect;" > "/etc/nginx/conf.d/$domain.d/maintenance.$app.conf"
 	systemctl reload nginx
 
 	# Sleep 4 seconds to let the browser reload the pages and redirect the user to the app.

scripts/backup

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-#=================================================
-# GENERIC START
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
@@ -10,29 +8,6 @@
 source ../settings/scripts/_common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# MANAGE SCRIPT FAILURE
-#=================================================
-
-ynh_clean_setup () {
-	true
-}
-# Exit if an error occurs during the execution of the script
-ynh_abort_if_errors
-
-#=================================================
-# LOAD SETTINGS
-#=================================================
-ynh_print_info --message="Loading installation settings..."
-
-app=$YNH_APP_INSTANCE_NAME
-
-final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-domain=$(ynh_app_setting_get --app=$app --key=domain)
-
-# Get variable from ynh_add_fpm_config
-fpm_config_dir=$(ynh_app_setting_get --app=$app --key=fpm_config_dir)
-
 #=================================================
 # DECLARE DATA AND CONF FILES TO BACKUP
 #=================================================
@@ -42,21 +17,28 @@ ynh_print_info --message="Declaring files to be backed up..."
 # BACKUP THE APP MAIN DIR
 #=================================================
 
-ynh_backup --src_path="$final_path"
+ynh_backup --src_path="$install_dir"
+
 #=================================================
-# BACKUP THE NGINX CONFIGURATION
+# BACKUP THE SYSTEM CONFIGURATION
 #=================================================
 
 ynh_backup --src_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
-#=================================================
-# BACKUP THE PHP-FPM CONFIGURATION
-#=================================================
+ynh_backup --src_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
 
-ynh_backup --src_path="$fpm_config_dir/pool.d/$app.conf"
+ynh_backup --src_path="/etc/cron.d/pihole"
+
+ynh_backup --src_path="/etc/sudoers.d/pihole"
+
+ynh_backup --src_path="/etc/init.d/pihole-FTL"
+
+ynh_backup --src_path="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
+
+if test -e "/etc/dnsmasq.d/03-pihole-wildcard.conf"; then
+    ynh_backup --src_path="/etc/dnsmasq.d/03-pihole-wildcard.conf"
+fi
 
-#=================================================
-# SPECIFIC BACKUP
 #=================================================
 # BACKUP VARIOUS FILES
 #=================================================
@@ -65,22 +47,11 @@ ynh_backup --src_path="$PI_HOLE_LOCAL_REPO"
 ynh_backup --src_path="$PI_HOLE_CONFIG_DIR"
 ynh_backup --src_path="$PI_HOLE_INSTALL_DIR"
 
-ynh_backup --src_path="/etc/cron.d/pihole"
-
 ynh_backup --src_path="$PI_HOLE_BIN_DIR/pihole"
 ynh_backup --src_path="/etc/bash_completion.d/pihole"
 
-ynh_backup --src_path="/etc/sudoers.d/pihole"
-
-ynh_backup --src_path="/etc/init.d/pihole-FTL"
 ynh_backup --src_path="/usr/bin/pihole-FTL"
 
-if test -e "/etc/dnsmasq.d/03-pihole-wildcard.conf"; then
-	ynh_backup --src_path="/etc/dnsmasq.d/03-pihole-wildcard.conf"
-fi
-
-ynh_backup --src_path="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
-
 #=================================================
 # END OF SCRIPT
 #=================================================

scripts/change_url

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-#=================================================
-# GENERIC STARTING
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
@@ -9,115 +7,25 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# RETRIEVE ARGUMENTS
-#=================================================
-
-old_domain=$YNH_APP_OLD_DOMAIN
-old_path=$YNH_APP_OLD_PATH
-
-new_domain=$YNH_APP_NEW_DOMAIN
-new_path=$YNH_APP_NEW_PATH
-
-app=$YNH_APP_INSTANCE_NAME
-
-#=================================================
-# LOAD SETTINGS
-#=================================================
-ynh_script_progression --message="Loading installation settings..." --weight=2
-
-# Needed for helper "ynh_add_nginx_config"
-final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-
-#=================================================
-# BACKUP BEFORE CHANGE URL THEN ACTIVE TRAP
-#=================================================
-ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --weight=11
-
-# Backup the current version of the app
-ynh_backup_before_upgrade
-ynh_clean_setup () {
-	# Remove the new domain config file, the remove script won't do it as it doesn't know yet its location.
-	ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
-
-	# Restore it if the upgrade fails
-	ynh_restore_upgradebackup
-}
-# Exit if an error occurs during the execution of the script
-ynh_abort_if_errors
-
 #=================================================
 # ACTIVATE MAINTENANCE MODE
 #=================================================
 ynh_script_progression --message="Activating maintenance mode..." --weight=1
 
-path_url=$old_path
-domain=$old_domain
 ynh_maintenance_mode_ON
 
-#=================================================
-# CHECK WHICH PARTS SHOULD BE CHANGED
-#=================================================
-
-change_domain=0
-if [ "$old_domain" != "$new_domain" ]
-then
-	change_domain=1
-fi
-
-change_path=0
-if [ "$old_path" != "$new_path" ]
-then
-	change_path=1
-fi
-
-#=================================================
-# STANDARD MODIFICATIONS
 #=================================================
 # MODIFY URL IN NGINX CONF
 #=================================================
 ynh_script_progression --message="Updating NGINX web server configuration..." --weight=4
 
-nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
-
-# Change the path in the NGINX config file
-if [ $change_path -eq 1 ]
-then
-	# Make a backup of the original NGINX config file if modified
-	ynh_backup_if_checksum_is_different --file="$nginx_conf_path"
-	# Set global variables for NGINX helper
-	domain="$old_domain"
-	path_url="$new_path"
-	# Create a dedicated NGINX config
-	ynh_add_nginx_config
-fi
-
-# Change the domain for NGINX
-if [ $change_domain -eq 1 ]
-then
-	# Delete file checksum for the old conf file location
-	ynh_delete_file_checksum --file="$nginx_conf_path"
-	mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf
-	# Store file checksum for the new config file location
-	ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
-fi
-
-#=================================================
-# GENERIC FINALISATION
-#=================================================
-# RELOAD NGINX
-#=================================================
-ynh_script_progression --message="Reloading NGINX web server..." --weight=1
-
-ynh_systemd_action --service_name=nginx --action=reload
+ynh_change_url_nginx_config
 
 #=================================================
 # DEACTIVE MAINTENANCE MODE
 #=================================================
 ynh_script_progression --message="Disabling maintenance mode..." --weight=5
 
-path_url=$old_path
-domain=$old_domain
 ynh_maintenance_mode_OFF
 
 #=================================================

scripts/install

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-#=================================================
-# GENERIC START
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
@@ -10,244 +8,113 @@ source _common.sh
 source /usr/share/yunohost/helpers
 
 #=================================================
-# MANAGE SCRIPT FAILURE
-#=================================================
-
-ynh_clean_setup () {
-	true
-}
-# Exit if an error occurs during the execution of the script
-ynh_abort_if_errors
-
-#=================================================
-# RETRIEVE ARGUMENTS FROM THE MANIFEST
+# INITIALIZE AND STORE SETTINGS
 #=================================================
 
-domain=$YNH_APP_ARG_DOMAIN
-path_url=$YNH_APP_ARG_PATH
-admin=$YNH_APP_ARG_ADMIN
-query_logging=$YNH_APP_ARG_QUERY_LOGGING
-enable_dhcp=$YNH_APP_ARG_ENABLE_DHCP
-
-app=$YNH_APP_INSTANCE_NAME
+ynh_app_setting_set --app="$app" --key="overwrite_setupvars" --value=1
+ynh_app_setting_set --app="$app" --key="overwrite_ftl" --value=1
 
 #=================================================
-# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
+# CHECK AVAILABLE PORT
 #=================================================
-ynh_script_progression --message="Validating installation parameters..." --weight=2
 
-final_path=/var/www/$app
-test ! -e "$final_path" || ynh_die --message="This path already contains a folder"
-
-# Register (book) web path
-ynh_webpath_register --app=$app --domain=$domain --path_url=$path_url
-
-#=================================================
-# STORE SETTINGS FROM MANIFEST
-#=================================================
-ynh_script_progression --message="Storing installation settings..." --weight=3
-
-ynh_app_setting_set --app=$app --key=domain --value=$domain
-ynh_app_setting_set --app=$app --key=path --value=$path_url
-ynh_app_setting_set --app=$app --key=admin --value=$admin
-ynh_app_setting_set --app=$app --key=query_logging --value=$query_logging
-ynh_app_setting_set --app=$app --key=enable_dhcp --value=$enable_dhcp
-
-ynh_app_setting_set --app=$app --key=overwrite_setupvars --value=1
-ynh_app_setting_set --app=$app --key=overwrite_ftl --value=1
-
-#=================================================
-# STANDARD MODIFICATIONS
-#=================================================
-# FIND AND OPEN A PORT
-#=================================================
-ynh_script_progression --message="Finding an available port..." --weight=12
-
-# Find an available port
-port=$(ynh_find_port --port=4711)
-if [ $port -gt 4720 ]
-then
-	ynh_die --message="The ports 4711 to 4720 are already in use. Pi-hole can't work on another port. Please try to free one of these ports."
-fi
-ynh_app_setting_set --app=$app --key=port --value=$port
-
-# Disable the port 53 for upnp
-ynh_exec_fully_quiet yunohost firewall disallow Both 53 --no-reload
-ynh_exec_fully_quiet yunohost firewall allow Both 53 --no-upnp
-
-# Open the UDP port 67 for dhcp
-ynh_exec_fully_quiet yunohost firewall allow UDP 67 --no-upnp
-
-#=================================================
-# INSTALL DEPENDENCIES
-#=================================================
-ynh_script_progression --message="Installing dependencies..." --weight=12
-
-ynh_install_app_dependencies $pkg_dependencies
-
-#=================================================
-# CREATE DEDICATED USER
-#=================================================
-ynh_script_progression --message="Configuring system user..." --weight=2
-
-# Create a system user
-ynh_system_user_create --username=$app --home_dir="$final_path"
+_configure_ports
 
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
 ynh_script_progression --message="Setting up source files..." --weight=4
 
-ynh_app_setting_set --app=$app --key=final_path --value=$final_path
 # Download, check integrity, uncompress and patch the source from app.src
-ynh_setup_source --dest_dir="$PI_HOLE_LOCAL_REPO" --source_id="pi-hole_Core"
-ynh_setup_source --dest_dir="$final_path" --source_id=pi-hole_AdminLTE
-FTL_temp_path=$(mktemp -d)
-ynh_setup_source --dest_dir="$FTL_temp_path" --source_id="pi-hole_FTL"
+ynh_setup_source --source_id="pi-hole_core" --dest_dir="$PI_HOLE_LOCAL_REPO"
+ynh_setup_source --source_id="pi-hole_web" --dest_dir="$install_dir/web"
+ynh_setup_source --source_id="pi-hole_ftl" --dest_dir="$install_dir/ftl"
 
-chmod 750 "$final_path"
-chmod -R o-rwx "$final_path"
-chown -R $app:www-data "$final_path"
+chmod -R o-rwx "$install_dir"
+chown -R "$app:www-data" "$install_dir"
 
-#=================================================
-# PHP-FPM CONFIGURATION
-#=================================================
-ynh_script_progression --message="Configuring PHP-FPM..." --weight=2
-
-# Create a dedicated PHP-FPM config
-ynh_add_fpm_config
-
-#=================================================
-# NGINX CONFIGURATION
-#=================================================
-ynh_script_progression --message="Configuring NGINX web server..." --weight=2
-
-# Create a dedicated NGINX config
-ynh_add_nginx_config
+touch /var/log/{pihole,pihole-FTL}.log
+chmod 644 /var/log/{pihole,pihole-FTL}.log
+chown "$dnsmasq_user:root" /var/log/{pihole,pihole-FTL}.log
 
-#=================================================
-# SPECIFIC SETUP
 #=================================================
 # INSTALLATION OF PIHOLE-FTL
 #=================================================
-ynh_script_progression --message="Installing PiHole-FTL..." --weight=30
+ynh_script_progression --message="Building PiHole-FTL..." --weight=30
 
 # Instead of downloading a binary file, we're going to compile it
-( 
-	cd "$FTL_temp_path"
-	ynh_exec_warn_less cmake .
-	ynh_exec_warn_less make
-	ynh_exec_warn_less make install
-)
-
-ynh_secure_remove --file="$FTL_temp_path"
+pushd "$install_dir/ftl"
+    ynh_exec_warn_less cmake .
+    ynh_exec_warn_less make
+    ynh_exec_warn_less make install
+popd
+ynh_secure_remove --file="$install_dir/ftl"
 
 #=================================================
 # INSTALL THE SCRIPTS
 #=================================================
-ynh_script_progression --message="Installing the scripts..." --weight=1
-
-pushd "${PI_HOLE_LOCAL_REPO}"
-	install -o "${app}" -Dm755 -d "${PI_HOLE_INSTALL_DIR}"
-	install -o "${app}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" gravity.sh
-	install -o "${app}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/*.sh
-	install -o "${app}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/COL_TABLE
-	install -o "${app}" -Dm755 -t "${PI_HOLE_BIN_DIR}" pihole
-	install -Dm644 ./advanced/bash-completion/pihole /etc/bash_completion.d/pihole
-popd
+ynh_script_progression --message="Installing Pihole..." --weight=1
+
+install -o "$app" -Dm755 -d "$PI_HOLE_INSTALL_DIR"
+install -o "$app" -Dm755 -t "$PI_HOLE_INSTALL_DIR" "$PI_HOLE_LOCAL_REPO/gravity.sh"
+install -o "$app" -Dm755 -t "$PI_HOLE_INSTALL_DIR" "$PI_HOLE_LOCAL_REPO/advanced/Scripts"/*.sh
+install -o "$app" -Dm755 -t "$PI_HOLE_INSTALL_DIR" "$PI_HOLE_LOCAL_REPO/advanced/Scripts/COL_TABLE"
+install -Dm644 -t /etc/bash_completion.d/          "$PI_HOLE_LOCAL_REPO/advanced/bash-completion/pihole"
+
+install -o "$app" -Dm755 -t "$PI_HOLE_BIN_DIR" "$PI_HOLE_LOCAL_REPO/pihole"
 
 #=================================================
 # INSTALL THE CONFIGS
 #=================================================
-ynh_script_progression --message="Installing the configs..." --weight=1
+ynh_script_progression --message="Installing $app's configuration files..." --weight=1
 
-install -d -m 0755 ${PI_HOLE_CONFIG_DIR}
+install -d -m 0755 "$PI_HOLE_CONFIG_DIR"
+ynh_add_config --template="dns-servers.conf" --destination="$PI_HOLE_CONFIG_DIR/dns-servers.conf"
+ynh_add_config --template="pihole-FTL.conf" --destination="$PI_HOLE_CONFIG_DIR/pihole-FTL.conf"
+ynh_add_config --template="setupVars.conf" --destination="$PI_HOLE_CONFIG_DIR/setupVars.conf"
 
-cp "../conf/dns-servers.conf" "$PI_HOLE_CONFIG_DIR/dns-servers.conf"
 chmod 644 "${PI_HOLE_CONFIG_DIR}/dns-servers.conf"
 
-ynh_add_config --template="../conf/pihole-FTL.conf" --destination="$PI_HOLE_CONFIG_DIR/pihole-FTL.conf"
-
-install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.service" "/etc/init.d/pihole-FTL"
-
 #=================================================
-# INSTALL SUDOER FILE
+# SET VERSIONS FOR THE FOOTER OF THE WEB INTERFACE
 #=================================================
-ynh_script_progression --message="Installing sudoer file..." --weight=1
+ynh_script_progression --message="Setting versions for the footer of the web interface..." --weight=1
 
-install -m 0640 ${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole.sudo /etc/sudoers.d/pihole
-echo "$app ALL=NOPASSWD: ${PI_HOLE_BIN_DIR}/pihole" >> /etc/sudoers.d/pihole
+echo "master master master" > "$PI_HOLE_CONFIG_DIR/localbranches"
+echo "$(ynh_app_upstream_version) $pihole_adminlte_version $pihole_flt_version" \
+    | tee "$PI_HOLE_CONFIG_DIR/"{GitHubVersions,localversions} > /dev/null
 
 #=================================================
-# INSTALL A CRON JOB
+# BUILD THE LISTS WITH GRAVITY
 #=================================================
-ynh_script_progression --message="Installing a cron job..." --weight=1
-
-install -D -m 644 -T -o root -g root ${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole.cron /etc/cron.d/pihole
-
-# Randomize gravity update time
-ynh_replace_string --match_string="59 1 " --replace_string="$((1 + RANDOM % 58)) $((3 + RANDOM % 2)) " --target_file="/etc/cron.d/pihole"
-
-# Randomize update checker time
-ynh_replace_string --match_string="59 17" --replace_string="$((1 + RANDOM % 58)) $((12 + RANDOM % 8))" --target_file="/etc/cron.d/pihole"
+ynh_script_progression --message="Building the lists with Gravity..." --weight=7
 
-# Remove git usage for version. Which fails because we use here a release instead of master.
-ynh_replace_string --match_string=".*updatechecker.*" --replace_string="#&" --target_file=/etc/cron.d/pihole
+ynh_add_config --template="adlists.default" --destination="$PI_HOLE_CONFIG_DIR/adlists.list"
+ynh_exec_warn_less "$PI_HOLE_INSTALL_DIR/gravity.sh" --force
 
 #=================================================
-# INSTALL LOGROTATE SCRIPT FOR PI-HOLE
+# CONFIGURE DNS FOR THE LOCAL DOMAINS
 #=================================================
-ynh_script_progression --message="Installing logrotate script for PI-HOLE..." --weight=1
+ynh_script_progression --message="Configuring DNS for the local domains..." --weight=7
 
-install -D -m 644 -T "${PI_HOLE_LOCAL_REPO}"/advanced/Templates/logrotate "$PI_HOLE_CONFIG_DIR/logrotate"
+# List all YunoHost domains
+while read -r perdomain; do
+    # Comment domain resolution in /etc/hosts on 127.0.0.1, because they can interfere with the local network resolution.
+    ynh_replace_string --match_string="^127.0.0.1.*$perdomain" --replace_string="#Commented by pihole# &" --target_file=/etc/hosts
 
-sed -i "/# su #/d;" "$PI_HOLE_CONFIG_DIR/logrotate"
+    # And add a resolution on the local IP instead
+    grep -q "^$localipv4.*$perdomain" /etc/hosts || \
+        echo "$localipv4	$perdomain #Added by pihole#" >> /etc/hosts
+done <<< "$(yunohost domain list | grep "\." | sed 's/.*: \|.*- //')"
 
 #=================================================
 # DISABLING DNSMASQ
 #=================================================
-ynh_script_progression --message="Disabling DNSMASQ..." --weight=1
+ynh_script_progression --message="Disabling Dnsmasq in system and yunohost..." --weight=1
 
-# Last version available
-# Stopped dnsmasq to replace it by pihole-FTL
+# Stop dnsmasq to replace it by pihole-FTL
 ynh_systemd_action --service_name=dnsmasq --action=stop
 
-# Disable the real dnsmasq service
-#ynh_exec_warn_less systemctl disable dnsmasq --quiet
-
-#=================================================
-# FINAL EXPORTS
-#=================================================
-ynh_script_progression --message="Final exports..." --weight=1
-
-setupVars="$PI_HOLE_CONFIG_DIR/setupVars.conf"
-
-# Get the default network interface
-main_iface=$(ip route | grep --max-count=1 default | awk '{print $5;}')
-echo "PIHOLE_INTERFACE=$main_iface" > $setupVars
-echo "IPV4_ADDRESS=127.0.0.1" >> $setupVars
-echo "IPV6_ADDRESS=::1" >> $setupVars
-echo "PIHOLE_DNS_1=" >> $setupVars
-echo "PIHOLE_DNS_2=" >> $setupVars
-if [ $query_logging -eq 1 ]; then
-	query_logging=true
-else
-	query_logging=false
-fi
-echo "QUERY_LOGGING=$query_logging" >> $setupVars
-echo "INSTALL_WEB=true" >> $setupVars
-echo "BLOCKING_ENABLED=true" >> $setupVars
-
-# Calculate and store the config file checksum into the app settings
-ynh_store_file_checksum --file="$setupVars"
-
-#=================================================
-# ENABLING FTL
-#=================================================
-ynh_script_progression --message="Enable FTL..." --weight=1
-
-ynh_exec_warn_less systemctl enable pihole-FTL --quiet
-
 # Replace the service dnsmasq by pihole-FTL
 # That way, YunoHost can continue to use dnsmasq by actually using pihole-FTL
 #ln -sf /run/systemd/generator.late/pihole-FTL.service /etc/systemd/system/dnsmasq.service
@@ -256,91 +123,41 @@ systemctl mask dnsmasq.service
 # Reload systemd config
 systemctl daemon-reload
 
-#=================================================
-# CREATE LOG FILES
-#=================================================
-ynh_script_progression --message="Creating log files..." --weight=1
-
-touch /var/log/{pihole,pihole-FTL}.log
-chmod 644 /var/log/{pihole,pihole-FTL}.log
-dnsmasq_user=$(grep DNSMASQ_USER= /etc/init.d/dnsmasq | cut -d'"' -f2)
-chown $dnsmasq_user:root /var/log/{pihole,pihole-FTL}.log
-
-#=================================================
-# BUILD THE LISTS WITH GRAVITY
-#=================================================
-ynh_script_progression --message="Building the lists with Gravity..." --weight=7
-
-cp "../conf/adlists.default" "$PI_HOLE_CONFIG_DIR/adlists.list"
-ynh_exec_warn_less $PI_HOLE_INSTALL_DIR/gravity.sh --force
-
-#=================================================
-# CONFIGURE DNS FOR THE LOCAL DOMAINS
-#=================================================
-ynh_script_progression --message="Configuring DNS for the local domains..." --weight=7
-
-# Find the IP associated to the network interface
-localipv4=$(ip address | grep "${main_iface}\$" | awk '{print $2;}' | cut -d/ -f1)
-
-# List all YunoHost domains
-while read perdomain
-do
-	# Comment domain resolution in /etc/hosts on 127.0.0.1, because they can interfere with the local network resolution.
-	ynh_replace_string --match_string="^127.0.0.1.*$perdomain" --replace_string="#Commented by pihole# &" --target_file=/etc/hosts
-
-	# And add a resolution on the local IP instead
-	grep -q "^$localipv4.*$perdomain" /etc/hosts || \
-		echo "$localipv4	$perdomain #Added by pihole#" >> /etc/hosts
-done <<< "$(yunohost domain list | grep "\." | sed 's/.*: \|.*- //')"
+# Workaround for strings to not be replaced
+a_range="__A_RANGE__"
+b_range="__B_RANGE__"
+gateway="__GATEWAY__"
+ynh_add_config --template="dnsmasq_regenconf_hook" --destination="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
+ynh_exec_warn_less yunohost tools regen-conf dnsmasq
 
 #=================================================
-# SET VERSIONS FOR THE FOOTER OF THE WEB INTERFACE
+# SYSTEM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Setting versions for the footer of the web interface..." --weight=1
+ynh_script_progression --message="Adding system configurations related to $app..." --weight=1
 
-echo "master master master" > $PI_HOLE_CONFIG_DIR/localbranches
-echo "$(ynh_app_upstream_version) $pihole_adminlte_version $pihole_flt_version" | tee $PI_HOLE_CONFIG_DIR/{GitHubVersions,localversions}  > /dev/null
+# Create a dedicated PHP-FPM config
+ynh_add_fpm_config
 
-#=================================================
-# SET UP CONF_REGEN HOOK
-#=================================================
-ynh_script_progression --message="Setting up conf_regen hook..." --weight=1
+# Create a dedicated NGINX config
+ynh_add_nginx_config
 
-cp ../conf/dnsmasq_regenconf_hook /usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app
-ynh_replace_string --match_string="__APP__" --replace_string="$app" --target_file="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
+# Create sudoers config
+_add_sudoers_config
 
-systemctl daemon-reload
-ynh_exec_warn_less yunohost tools regen-conf dnsmasq
+_add_cron_jobs
 
-#=================================================
-# GENERIC FINALISATION
-#=================================================
-# INTEGRATE SERVICE IN YUNOHOST
-#=================================================
-ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
+_add_logrotate_config
 
+install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.service" "/etc/init.d/pihole-FTL"
+ynh_exec_warn_less systemctl enable pihole-FTL --quiet
 yunohost service add pihole-FTL --description="PiHole backend service" --log="/var/log/pihole-FTL.log" --needs_exposed_ports 53 67
 
 #=================================================
 # START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --weight=2
-
-ynh_systemd_action --service_name=pihole-FTL --action=restart --log_path="/var/log/pihole-FTL.log"
-
-#=================================================
-# SETUP SSOWAT
-#=================================================
-ynh_script_progression --message="Configuring permissions..." --weight=2
-
-ynh_permission_update --permission="main" --add="$admin" --remove="all_users"
-
-#=================================================
-# RELOAD NGINX
-#=================================================
-ynh_script_progression --message="Reloading NGINX web server..." --weight=3
+ynh_script_progression --message="Starting $app's systemd service..." --weight=2
 
-ynh_systemd_action --service_name=nginx --action=reload
+ynh_systemd_action --service_name="pihole-FTL" --action=restart --log_path="/var/log/pihole-FTL.log"
 
 #=================================================
 # END OF SCRIPT

scripts/remove

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-#=================================================
-# GENERIC START
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
@@ -10,35 +8,16 @@ source _common.sh
 source /usr/share/yunohost/helpers
 
 #=================================================
-# LOAD SETTINGS
-#=================================================
-ynh_script_progression --message="Loading installation settings..." --weight=2
-
-app=$YNH_APP_INSTANCE_NAME
-
-domain=$(ynh_app_setting_get --app=$app --key=domain)
-port=$(ynh_app_setting_get --app=$app --key=port)
-final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-
-#=================================================
-# STANDARD REMOVE
-#=================================================
-# REMOVE SERVICE INTEGRATION IN YUNOHOST
+# REMOVE SYSTEM CONFIGURATIONS
 #=================================================
+ynh_script_progression --message="Removing system configurations related to $app..." --weight=1
 
 # Remove the service from the list of services known by YunoHost (added from `yunohost service add`)
-if ynh_exec_warn_less yunohost service status pihole-FTL >/dev/null
-then
-	ynh_script_progression --message="Removing $app service integration..." --weight=2
-	yunohost service remove pihole-FTL
+if ynh_exec_warn_less yunohost service status "pihole-FTL" >/dev/null; then
+    yunohost service remove "pihole-FTL"
 fi
 
-#=================================================
-# STOP AND REMOVE SERVICE
-#=================================================
-ynh_script_progression --message="Stopping and removing the systemd service..." --weight=1
-
-ynh_systemd_action --service_name=pihole-FTL --action=stop
+ynh_systemd_action --service_name="pihole-FTL" --action="stop"
 
 # Restore dnsmasq as main DNS resolver
 # Move dnsmasq back to its original place
@@ -63,56 +42,26 @@ ynh_secure_remove --file="/usr/bin/pihole-FTL"
 ynh_secure_remove --file="/var/run/pihole-FTL.pid"
 ynh_secure_remove --file="/var/run/pihole-FTL.port"
 
-#=================================================
-# REMOVE APP MAIN DIR
-#=================================================
-ynh_script_progression --message="Removing app main directory..." --weight=1
-
-# Remove the app directory securely
-ynh_secure_remove --file="$final_path"
-
-#=================================================
-# REMOVE NGINX CONFIGURATION
-#=================================================
-ynh_script_progression --message="Removing NGINX web server configuration..." --weight=1
-
 # Remove the dedicated NGINX config
 ynh_remove_nginx_config
 
-#=================================================
-# REMOVE PHP-FPM CONFIGURATION
-#=================================================
-ynh_script_progression --message="Removing PHP-FPM configuration..." --weight=2
-
 # Remove the dedicated PHP-FPM config
 ynh_remove_fpm_config
 
-#=================================================
-# REMOVE DEPENDENCIES
-#=================================================
-ynh_script_progression --message="Removing dependencies..." --weight=7
-
-# Remove metapackage and its dependencies
-ynh_remove_app_dependencies
-
 #=================================================
 # CLOSE A PORT
 #=================================================
 
-if yunohost firewall list | grep -q "\- $port$"
-then
-	ynh_script_progression --message="Closing port $port..." --weight=1
-	ynh_exec_warn_less yunohost firewall disallow TCP $port
+if yunohost firewall list | grep -q "\- $port$"; then
+    ynh_script_progression --message="Closing port $port..." --weight=1
+    ynh_exec_warn_less yunohost firewall disallow TCP "$port"
 fi
 
-if yunohost firewall list | grep -q "\- 67$"
-then
-	ynh_script_progression --message="Closing port 67..." --weight=1
-	ynh_exec_warn_less yunohost firewall disallow UDP 67
+if yunohost firewall list | grep -q "\- 67$"; then
+    ynh_script_progression --message="Closing port 67..." --weight=1
+    ynh_exec_warn_less yunohost firewall disallow UDP 67
 fi
 
-#=================================================
-# SPECIFIC REMOVE
 #=================================================
 # REMOVE VARIOUS FILES
 #=================================================
@@ -163,7 +112,7 @@ ynh_script_progression --message="Removing conf_regen hook..." --weight=1
 
 ynh_systemd_action --service_name=dnsmasq --action=stop
 
-ynh_secure_remove --file=/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app
+ynh_secure_remove --file="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
 
 ynh_exec_warn_less yunohost tools regen-conf dnsmasq
 
@@ -174,18 +123,12 @@ ynh_script_progression --message="Restarting Dnsmasq..." --weight=1
 
 ynh_systemd_action --service_name=dnsmasq --action=restart
 
-#=================================================
-# GENERIC FINALIZATION
 #=================================================
 # REMOVE DEDICATED USER
 #=================================================
-ynh_script_progression --message="Removing the dedicated system user..." --weight=2
 
 # Dirty hack to remove correctly the user
-killall -u $app
-
-# Delete a system user
-ynh_system_user_delete --username=$app
+killall -u "$app"
 
 #=================================================
 # END OF SCRIPT

scripts/restore

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-#=================================================
-# GENERIC START
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
@@ -11,55 +9,16 @@ source ../settings/scripts/_common.sh
 source /usr/share/yunohost/helpers
 
 #=================================================
-# MANAGE SCRIPT FAILURE
-#=================================================
-
-ynh_clean_setup () {
-	true
-}
-# Exit if an error occurs during the execution of the script
-ynh_abort_if_errors
-
-#=================================================
-# LOAD SETTINGS
-#=================================================
-ynh_script_progression --message="Loading installation settings..." --weight=2
-
-app=$YNH_APP_INSTANCE_NAME
-
-domain=$(ynh_app_setting_get --app=$app --key=domain)
-path_url=$(ynh_app_setting_get --app=$app --key=path)
-final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-enable_dhcp=$(ynh_app_setting_get --app=$app --key=enable_dhcp)
-admin=$(ynh_app_setting_get --app=$app --key=admin)
-
-#=================================================
-# CHECK IF THE APP CAN BE RESTORED
+# INITIALIZE AND STORE SETTINGS
 #=================================================
-ynh_script_progression --message="Validating restoration parameters..." --weight=1
 
-test ! -d $final_path \
-	|| ynh_die --message="There is already a directory: $final_path "
+dnsmasq_user=$(grep DNSMASQ_USER= /etc/init.d/dnsmasq | cut -d'"' -f2)
 
 #=================================================
-# FIND AND OPEN A PORT
+# CHECK AVAILABLE PORT
 #=================================================
-ynh_script_progression --message="Finding an available port..." --weight=12
 
-# Find an available port
-port=$(ynh_find_port --port=4711)
-if [ $port -gt 4720 ]
-then
-	ynh_die --message="The ports 4711 to 4720 are already in use. Pi-hole can't work on another port. Please try to free one of these ports."
-fi
-ynh_app_setting_set --app=$app --key=port --value=$port
-
-# Disable the port 53 for upnp
-ynh_exec_fully_quiet yunohost firewall disallow Both 53 --no-reload
-ynh_exec_fully_quiet yunohost firewall allow Both 53 --no-upnp
-
-# Open the UDP port 67 for dhcp
-ynh_exec_fully_quiet yunohost firewall allow UDP 67 --no-upnp
+_configure_ports
 
 #=================================================
 # ACTIVATE MAINTENANCE MODE
@@ -68,51 +27,19 @@ ynh_script_progression --message="Activating maintenance mode..." --weight=2
 
 ynh_maintenance_mode_ON
 
-#=================================================
-# STANDARD RESTORATION STEPS
-#=================================================
-# RECREATE THE DEDICATED USER
-#=================================================
-ynh_script_progression --message="Recreating the dedicated system user..." --weight=2
-
-# Create the dedicated user (if not existing)
-ynh_system_user_create --username=$app --home_dir="$final_path"
-
 #=================================================
 # RESTORE THE APP MAIN DIR
 #=================================================
 ynh_script_progression --message="Restoring the app main directory..." --weight=1
 
-ynh_restore_file --origin_path="$final_path"
-
-chmod 750 "$final_path"
-chmod -R o-rwx "$final_path"
-chown -R $app:www-data "$final_path"
-
-#=================================================
-# SPECIFIC RESTORATION
-#=================================================
-# REINSTALL DEPENDENCIES
-#=================================================
-ynh_script_progression --message="Reinstalling dependencies..." --weight=12
-
-# Define and install dependencies
-ynh_install_app_dependencies $pkg_dependencies
-
-#=================================================
-# RESTORE THE PHP-FPM CONFIGURATION
-#=================================================
-ynh_script_progression --message="Restoring the PHP-FPM configuration..." --weight=7
-
-# Restore the file first, so it can have a backup if different
-ynh_add_fpm_config
+ynh_restore_file --origin_path="$install_dir"
 
-#=================================================
-# RESTORE THE NGINX CONFIGURATION
-#=================================================
-ynh_script_progression --message="Restoring the NGINX web server configuration..." --weight=1
+chmod -R o-rwx "$install_dir"
+chown -R "$app:www-data" "$install_dir"
 
-ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
+touch /var/log/{pihole,pihole-FTL}.log
+chmod 644 /var/log/{pihole,pihole-FTL}.log
+chown "$dnsmasq_user:root" /var/log/{pihole,pihole-FTL}.log
 
 #=================================================
 # RESTORE SPECIFIC FILES
@@ -122,40 +49,18 @@ ynh_script_progression --message="Restoring specific files..." --weight=1
 ynh_restore_file --origin_path="$PI_HOLE_LOCAL_REPO"
 
 ynh_restore_file --origin_path="$PI_HOLE_CONFIG_DIR"
-# Restore permissions on app files
-chown $app: -R "$PI_HOLE_CONFIG_DIR"
+chown "$app:" -R "$PI_HOLE_CONFIG_DIR"
+
 # $PI_HOLE_CONFIG_DIR/logrotate have to belong to root, otherwise logrotate will failed silently...
 chown root: -R "$PI_HOLE_CONFIG_DIR/logrotate"
 
 ynh_restore_file --origin_path="$PI_HOLE_INSTALL_DIR"
 
 ynh_restore_file --origin_path="$PI_HOLE_BIN_DIR/pihole"
+
 ynh_restore_file --origin_path="/etc/bash_completion.d/pihole"
 
-ynh_restore_file --origin_path="/etc/init.d/pihole-FTL"
 ynh_restore_file --origin_path="/usr/bin/pihole-FTL"
-install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.service" "/etc/init.d/pihole-FTL"
-
-ynh_restore_file --origin_path="/etc/sudoers.d/pihole"
-
-#=================================================
-# RESTORE THE CRON FILE
-#=================================================
-ynh_script_progression --message="Restoring the cron file..." --weight=1
-
-ynh_restore_file --origin_path="/etc/cron.d/pihole"
-
-#=================================================
-# DISABLING DNSMASQ
-#=================================================
-ynh_script_progression --message="Disabling DNSMASQ..." --weight=1
-
-# Last version available
-# Stopped dnsmasq to replace it by pihole-FTL
-ynh_systemd_action --service_name=dnsmasq --action=stop
-
-# Disable the real dnsmasq service
-#ynh_exec_warn_less systemctl disable dnsmasq --quiet
 
 #=================================================
 # FINAL EXPORTS
@@ -166,38 +71,13 @@ setupVars="$PI_HOLE_CONFIG_DIR/setupVars.conf"
 
 # Get the default network interface
 main_iface=$(ip route | grep --max-count=1 default | awk '{print $5;}')
-echo "PIHOLE_INTERFACE=$main_iface" > $setupVars
-ynh_replace_string --match_string="^PIHOLE_INTERFACE=.*" --replace_string="PIHOLE_INTERFACE=$main_iface" --target_file=$setupVars
-ynh_replace_string --match_string="^IPV4_ADDRESS=.*" --replace_string="IPV4_ADDRESS=127.0.0.1" --target_file=$setupVars
+echo "PIHOLE_INTERFACE=$main_iface" > "$setupVars"
+ynh_replace_string --target_file="$setupVars" --match_string="^PIHOLE_INTERFACE=.*" --replace_string="PIHOLE_INTERFACE=$main_iface"
+ynh_replace_string --target_file="$setupVars" --match_string="^IPV4_ADDRESS=.*" --replace_string="IPV4_ADDRESS=127.0.0.1"
 
 # Calculate and store the config file checksum into the app settings
 ynh_store_file_checksum --file="$setupVars"
 
-#=================================================
-# ENABLING FTL
-#=================================================
-ynh_script_progression --message="Enable FTL..." --weight=1
-
-ynh_exec_warn_less systemctl enable pihole-FTL --quiet
-
-# Replace the service dnsmasq by pihole-FTL
-# That way, YunoHost can continue to use dnsmasq by actually using pihole-FTL
-#ln -sf /run/systemd/generator.late/pihole-FTL.service /etc/systemd/system/dnsmasq.service
-systemctl mask dnsmasq.service
-
-# Reload systemd config
-systemctl daemon-reload
-
-#=================================================
-# RECREATE LOG FILES
-#=================================================
-ynh_script_progression --message="Recreate log files..." --weight=1
-
-touch /var/log/{pihole,pihole-FTL}.log
-chmod 644 /var/log/{pihole,pihole-FTL}.log
-dnsmasq_user=$(grep DNSMASQ_USER= /etc/init.d/dnsmasq | cut -d'"' -f2)
-chown $dnsmasq_user:root /var/log/{pihole,pihole-FTL}.log
-
 #=================================================
 # CONFIGURE DNS FOR THE LOCAL DOMAINS
 #=================================================
@@ -207,51 +87,69 @@ ynh_script_progression --message="Configuring DNS for the local domains..." --we
 localipv4=$(ip address | grep "${main_iface}\$" | awk '{print $2;}' | cut -d/ -f1)
 
 # List all YunoHost domains
-while read perdomain
-do
-	# Comment domain resolution in /etc/hosts on 127.0.0.1, because they can interfere with the local network resolution.
-	ynh_replace_string --match_string="^127.0.0.1.*$perdomain" --replace_string="#Commented by pihole# &" --target_file=/etc/hosts
-
-	# And add a resolution on the local IP instead
-	grep -q "^$localipv4.*$perdomain" /etc/hosts || \
-		echo "$localipv4	$perdomain #Added by pihole#" >> /etc/hosts
+while read -r perdomain; do
+    # Comment domain resolution in /etc/hosts on 127.0.0.1, because they can interfere with the local network resolution.
+    ynh_replace_string --match_string="^127.0.0.1.*$perdomain" --replace_string="#Commented by pihole# &" --target_file=/etc/hosts
+
+    # And add a resolution on the local IP instead
+    grep -q "^$localipv4.*$perdomain" /etc/hosts || \
+        echo "$localipv4	$perdomain #Added by pihole#" >> /etc/hosts
 done <<< "$(yunohost domain list | grep "\." | sed 's/.*: \|.*- //')"
 
 #=================================================
-# SET UP CONF_REGEN HOOK
+# DISABLING DNSMASQ
 #=================================================
-ynh_script_progression --message="Setting up conf_regen hook..." --weight=1
+ynh_script_progression --message="Disabling Dnsmasq in system and yunohost..." --weight=1
 
-test -e "${YNH_APP_BACKUP_DIR}/etc/dnsmasq.d/03-pihole-wildcard.conf" && ynh_restore_file --origin_path="/etc/dnsmasq.d/03-pihole-wildcard.conf"
+# Stopped dnsmasq to replace it by pihole-FTL
+ynh_systemd_action --service_name=dnsmasq --action=stop
 
-ynh_restore_file --origin_path="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
+# Replace the service dnsmasq by pihole-FTL
+# That way, YunoHost can continue to use dnsmasq by actually using pihole-FTL
+#ln -sf /run/systemd/generator.late/pihole-FTL.service /etc/systemd/system/dnsmasq.service
+systemctl mask dnsmasq.service
+
+# Disable the real dnsmasq service
+#ynh_exec_warn_less systemctl disable dnsmasq --quiet
 
+# Reload systemd config
 systemctl daemon-reload
+
+test -e "${YNH_APP_BACKUP_DIR}/etc/dnsmasq.d/03-pihole-wildcard.conf" && ynh_restore_file --origin_path="/etc/dnsmasq.d/03-pihole-wildcard.conf"
+ynh_restore_file --origin_path="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
 ynh_exec_warn_less yunohost tools regen-conf dnsmasq
 
 #=================================================
-# INTEGRATE SERVICE IN YUNOHOST
+# RESTORE SYSTEM CONFIGURATIONS
 #=================================================
-ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
+ynh_script_progression --message="Restoring system configurations related to $app..." --weight=1
+
+ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
+# Restore the file first, so it can have a backup if different
+ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
+ynh_add_fpm_config
+
+ynh_restore_file --origin_path="/etc/cron.d/pihole"
+
+ynh_restore_file --origin_path="/etc/sudoers.d/pihole"
+
+ynh_restore_file --origin_path="/etc/init.d/pihole-FTL"
+# install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.service" "/etc/init.d/pihole-FTL"
+systemctl daemon-reload
+ynh_exec_warn_less systemctl enable pihole-FTL --quiet
 yunohost service add pihole-FTL --description="PiHole backend service" --log="/var/log/pihole-FTL.log" --needs_exposed_ports 53 67
 
 #=================================================
-# START SYSTEMD SERVICE
+# RELOAD NGINX AND PHP-FPM OR THE APP SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --weight=2
+ynh_script_progression --message="Reloading NGINX web server and $app's service..." --weight=1
 
-ynh_systemd_action --service_name=pihole-FTL --action=restart --log_path="/var/log/pihole-FTL.log"
+ynh_systemd_action --service_name="pihole-FTL" --action="restart" --log_path="/var/log/pihole-FTL.log"
 
-#=================================================
-# GENERIC FINALIZATION
-#=================================================
-# RELOAD NGINX AND PHP-FPM
-#=================================================
-ynh_script_progression --message="Reloading NGINX web server and PHP-FPM..." --weight=1
+ynh_systemd_action --service_name="php$phpversion-fpm" --action=reload
 
-ynh_systemd_action --service_name=php$YNH_PHP_VERSION-fpm --action=reload
-ynh_systemd_action --service_name=nginx --action=reload
+ynh_systemd_action --service_name="nginx" --action=reload
 
 #=================================================
 # DEACTIVE MAINTENANCE MODE

scripts/upgrade

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-#=================================================
-# GENERIC START
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
@@ -9,46 +7,6 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# LOAD SETTINGS
-#=================================================
-ynh_script_progression --message="Loading installation settings..." --weight=3
-
-app=$YNH_APP_INSTANCE_NAME
-
-domain=$(ynh_app_setting_get --app=$app --key=domain)
-path_url=$(ynh_app_setting_get --app=$app --key=path)
-admin=$(ynh_app_setting_get --app=$app --key=admin)
-query_logging=$(ynh_app_setting_get --app=$app --key=query_logging)
-final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-enable_dhcp=$(ynh_app_setting_get --app=$app --key=enable_dhcp)
-port=$(ynh_app_setting_get --app=$app --key=port)
-pihole_version="$(ynh_app_setting_get --app=$app --key=pihole_version)"
-
-overwrite_setupvars=$(ynh_app_setting_get --app=$app --key=overwrite_setupvars)
-overwrite_ftl=$(ynh_app_setting_get --app=$app --key=overwrite_ftl)
-
-#=================================================
-# CHECK VERSION
-#=================================================
-ynh_script_progression --message="Checking version..." --weight=1
-
-upgrade_type=$(ynh_check_app_version_changed)
-
-#=================================================
-# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
-#=================================================
-ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --weight=7
-
-# Backup the current version of the app
-ynh_backup_before_upgrade
-ynh_clean_setup () {
-	# Restore it if the upgrade fails
-	ynh_restore_upgradebackup
-}
-# Exit if an error occurs during the execution of the script
-ynh_abort_if_errors
-
 #=================================================
 # ACTIVATE MAINTENANCE MODE
 #=================================================
@@ -57,223 +15,139 @@ ynh_script_progression --message="Activating maintenance mode..." --weight=1
 ynh_maintenance_mode_ON
 
 #=================================================
-# STANDARD UPGRADE STEPS
+# STOP SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Stopping a systemd service..." --weight=1
+
+ynh_systemd_action --service_name=pihole-FTL --action="stop" --log_path="/var/log/pihole-FTL.log"
+
 #=================================================
 # ENSURE DOWNWARD COMPATIBILITY
 #=================================================
 ynh_script_progression --message="Ensuring downward compatibility..." --weight=1
 
 # If overwrite_setupvars doesn't exist, create it
-if [ -z "$overwrite_setupvars" ]; then
-	overwrite_setupvars=1
-	ynh_app_setting_set --app=$app --key=overwrite_setupvars --value=$overwrite_setupvars
+if [ -z "${overwrite_setupvars:-}" ]; then
+    overwrite_setupvars=1
+    ynh_app_setting_set --app="$app" --key="overwrite_setupvars" --value="$overwrite_setupvars"
 fi
 
 # If overwrite_ftl doesn't exist, create it
-if [ -z "$overwrite_ftl" ]; then
-	overwrite_ftl=1
-	ynh_app_setting_set --app=$app --key=overwrite_ftl --value=$overwrite_ftl
+if [ -z "${overwrite_ftl:-}" ]; then
+    overwrite_ftl=1
+    ynh_app_setting_set --app="$app" --key="overwrite_ftl" --value="$overwrite_ftl"
 fi
 
 # If pihole_version doesn't exist, create it
-if [ -z "$pihole_version" ]; then
-	pihole_version="Last 3.X"
-	ynh_app_setting_set --app=$app --key=pihole_version --value="$pihole_version"
+if [ -z "${pihole_version:-}" ]; then
+    pihole_version="Last 3.X"
+    ynh_app_setting_set --app="$app" --key="pihole_version" --value=""$pihole_version""
 fi
 
-#=================================================
-# CREATE DEDICATED USER
-#=================================================
-ynh_script_progression --message="Making sure dedicated system user exists..." --weight=1
-
-# Create a dedicated user (if not existing)
-ynh_system_user_create --username=$app --home_dir="$final_path"
-
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
+ynh_script_progression --message="Upgrading source files..." --weight=4
 
-if [ "$upgrade_type" == "UPGRADE_APP" ]
-then
-	ynh_script_progression --message="Upgrading source files..." --weight=4
-	ynh_setup_source --dest_dir="$PI_HOLE_LOCAL_REPO" --source_id="pi-hole_Core"
-	ynh_setup_source --dest_dir="$final_path" --source_id=pi-hole_AdminLTE
-	FTL_temp_path=$(mktemp -d)
-	ynh_setup_source --dest_dir="$FTL_temp_path" --source_id="pi-hole_FTL"
-fi
-
-chmod 750 "$final_path"
-chmod -R o-rwx "$final_path"
-chown -R $app:www-data "$final_path"
-
-#=================================================
-# UPGRADE DEPENDENCIES
-#=================================================
-ynh_script_progression --message="Upgrading dependencies..." --weight=6
+# Download, check integrity, uncompress and patch the source from app.src
+ynh_setup_source --source_id="pi-hole_core" --dest_dir="$PI_HOLE_LOCAL_REPO"
+ynh_setup_source --source_id="pi-hole_web" --dest_dir="$install_dir/web"
+ynh_setup_source --source_id="pi-hole_ftl" --dest_dir="$install_dir/ftl"
 
-ynh_install_app_dependencies $pkg_dependencies
+chmod -R o-rwx "$install_dir"
+chown -R "$app:www-data" "$install_dir"
 
-#=================================================
-# PHP-FPM CONFIGURATION
-#=================================================
-
-ynh_script_progression --message="Upgrading PHP-FPM configuration..." --weight=3
-# Create a dedicated PHP-FPM config
-ynh_add_fpm_config
-
-#=================================================
-# NGINX CONFIGURATION
-#=================================================
-
-ynh_script_progression --message="Upgrading NGINX web server configuration..." --weight=2
-# Create a dedicated NGINX config
-ynh_add_nginx_config
-
-#=================================================
-# SPECIFIC UPGRADE
-#=================================================
-# STOP SYSTEMD SERVICE
-#=================================================
-ynh_script_progression --message="Stopping a systemd service..." --weight=1
-
-ynh_systemd_action --service_name=pihole-FTL --action="stop" --log_path="/var/log/pihole-FTL.log"
+touch /var/log/{pihole,pihole-FTL}.log
+chmod 644 /var/log/{pihole,pihole-FTL}.log
+chown "$dnsmasq_user:root" /var/log/{pihole,pihole-FTL}.log
 
 #=================================================
-# UPDATE PIHOLE-FTL
+# UPGRADE OF PIHOLE-FTL
 #=================================================
+ynh_script_progression --message="Rebuilding PiHole-FTL..." --weight=30
 
-if [ "$upgrade_type" == "UPGRADE_APP" ]
-then
-	ynh_script_progression --message="Upgrading PiHole-FTL..." --weight=35
-
-	# Instead of downloading a binary file, we're going to compile it
-	( 
-		cd "$FTL_temp_path"
-		ynh_exec_warn_less cmake .
-		ynh_exec_warn_less make
-		ynh_exec_warn_less make install
-	)
-	ynh_secure_remove --file="$FTL_temp_path"
-fi
+# Instead of downloading a binary file, we're going to compile it
+pushd "$install_dir/ftl"
+    ynh_exec_warn_less cmake .
+    ynh_exec_warn_less make
+    ynh_exec_warn_less make install
+popd
+ynh_secure_remove --file="$install_dir/ftl"
 
 #=================================================
 # UPDATE THE SCRIPTS
 #=================================================
-ynh_script_progression --message="Updating the scripts..." --weight=1
+ynh_script_progression --message="Upgrading Pihole..." --weight=1
 
-pushd "${PI_HOLE_LOCAL_REPO}"
-	install -o "${app}" -Dm755 -d "${PI_HOLE_INSTALL_DIR}"
-	install -o "${app}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" gravity.sh
-	install -o "${app}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/*.sh
-	install -o "${app}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/COL_TABLE
-	install -o "${app}" -Dm755 -t "${PI_HOLE_BIN_DIR}" pihole
-	install -Dm644 ./advanced/bash-completion/pihole /etc/bash_completion.d/pihole
-popd
+install -o "$app" -Dm755 -d "$PI_HOLE_INSTALL_DIR"
+install -o "$app" -Dm755 -t "$PI_HOLE_INSTALL_DIR" "$PI_HOLE_LOCAL_REPO/gravity.sh"
+install -o "$app" -Dm755 -t "$PI_HOLE_INSTALL_DIR" "$PI_HOLE_LOCAL_REPO/advanced/Scripts"/*.sh
+install -o "$app" -Dm755 -t "$PI_HOLE_INSTALL_DIR" "$PI_HOLE_LOCAL_REPO/advanced/Scripts/COL_TABLE"
+install -Dm644 -t /etc/bash_completion.d/          "$PI_HOLE_LOCAL_REPO/advanced/bash-completion/pihole"
+
+install -o "$app" -Dm755 -t "$PI_HOLE_BIN_DIR" "$PI_HOLE_LOCAL_REPO/pihole"
 
 #=================================================
 # UPDATE THE CONFIGS
 #=================================================
-ynh_script_progression --message="Updating the configs..." --weight=1
-
-install -d -m 0755 ${PI_HOLE_CONFIG_DIR}
-
-cp -f "../conf/dns-servers.conf" "$PI_HOLE_CONFIG_DIR/dns-servers.conf"
-chmod 644 "${PI_HOLE_CONFIG_DIR}/dns-servers.conf"
+ynh_script_progression --message="Updating $app's configuration files..." --weight=1
 
+install -d -m 0755 "$PI_HOLE_CONFIG_DIR"
+ynh_add_config --template="dns-servers.conf" --destination="$PI_HOLE_CONFIG_DIR/dns-servers.conf"
 # Overwrite pihole-FTL config file only if it's allowed
-if [ $overwrite_ftl -eq 1 ]
-then
-	ynh_add_config --template="../conf/pihole-FTL.conf" --destination="$PI_HOLE_CONFIG_DIR/pihole-FTL.conf"
+if [ "$overwrite_ftl" -eq 1 ]; then
+    ynh_add_config --template="pihole-FTL.conf" --destination="$PI_HOLE_CONFIG_DIR/pihole-FTL.conf"
+fi
+# Overwrite the setupVars config file only if it's allowed
+if [ "$overwrite_setupvars" -eq 1 ]; then
+    ynh_add_config --template="setupVars.conf" --destination="$PI_HOLE_CONFIG_DIR/setupVars.conf"
 fi
 
-install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.service" "/etc/init.d/pihole-FTL"
+chmod 644 "${PI_HOLE_CONFIG_DIR}/dns-servers.conf"
 
 #=================================================
-# INSTALL SUDOER FILE
+# SET VERSIONS FOR THE FOOTER OF THE WEB INTERFACE
 #=================================================
-ynh_script_progression --message="Installing sudoer file..." --weight=1
+ynh_script_progression --message="Setting versions for the footer of the web interface..." --weight=1
 
-install -m 0640 ${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole.sudo /etc/sudoers.d/pihole
-echo "$app ALL=NOPASSWD: ${PI_HOLE_BIN_DIR}/pihole" >> /etc/sudoers.d/pihole
+echo "master master master" > "$PI_HOLE_CONFIG_DIR/localbranches"
+echo "$(ynh_app_upstream_version) $pihole_adminlte_version $pihole_flt_version" \
+    | tee "$PI_HOLE_CONFIG_DIR/"{GitHubVersions,localversions} > /dev/null
 
 #=================================================
-# UPDATE A CRON JOB
+# BUILD THE LISTS WITH GRAVITY
 #=================================================
-ynh_script_progression --message="Updating a cron job..." --weight=1
-
-install -D -m 644 -T -o root -g root ${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole.cron /etc/cron.d/pihole
-
-# Randomize gravity update time
-ynh_replace_string --match_string="59 1 " --replace_string="$((1 + RANDOM % 58)) $((3 + RANDOM % 2)) " --target_file="/etc/cron.d/pihole"
-
-# Randomize update checker time
-ynh_replace_string --match_string="59 17" --replace_string="$((1 + RANDOM % 58)) $((12 + RANDOM % 8))" --target_file="/etc/cron.d/pihole"
+ynh_script_progression --message="Building the lists with Gravity..." --weight=7
 
-# Remove Git usage for version. Which fails because we use here a release instead of master.
-ynh_replace_string --match_string=".*updatechecker.*" --replace_string="#&" --target_file=/etc/cron.d/pihole
+ynh_add_config --template="adlists.default" --destination="$PI_HOLE_CONFIG_DIR/adlists.list"
+ynh_exec_warn_less "$PI_HOLE_INSTALL_DIR/gravity.sh" --force
 
 #=================================================
-# UPDATE LOGROTATE SCRIPT FOR PI-HOLE
+# CONFIGURE DNS FOR THE LOCAL DOMAINS
 #=================================================
-ynh_script_progression --message="Updating logrotate script for PI-HOLE..." --weight=1
+ynh_script_progression --message="Configuring DNS for the local domains..." --weight=7
 
-install -D -m 644 -T "${PI_HOLE_LOCAL_REPO}"/advanced/Templates/logrotate "$PI_HOLE_CONFIG_DIR/logrotate"
+# List all YunoHost domains
+while read -r perdomain; do
+    # Comment domain resolution in /etc/hosts on 127.0.0.1, because they can interfere with the local network resolution.
+    ynh_replace_string --match_string="^127.0.0.1.*$perdomain" --replace_string="#Commented by pihole# &" --target_file=/etc/hosts
 
-sed -i "/# su #/d;" "$PI_HOLE_CONFIG_DIR/logrotate"
+    # And add a resolution on the local IP instead
+    grep -q "^$localipv4.*$perdomain" /etc/hosts || \
+        echo "$localipv4	$perdomain #Added by pihole#" >> /etc/hosts
+done <<< "$(yunohost domain list | grep "\." | sed 's/.*: \|.*- //')"
 
 #=================================================
 # DISABLING DNSMASQ
 #=================================================
-ynh_script_progression --message="Disabling DNSMASQ..." --weight=1
+ynh_script_progression --message="Disabling Dnsmasq in system and yunohost..." --weight=1
 
-# Last version available
-# Stopped dnsmasq to replace it by pihole-FTL
+# Stop dnsmasq to replace it by pihole-FTL
 ynh_systemd_action --service_name=dnsmasq --action=stop
 
 # Disable the real dnsmasq service
 #ynh_exec_warn_less systemctl disable dnsmasq --quiet
 
-#=================================================
-# FINAL EXPORTS
-#=================================================
-
-setupVars="$PI_HOLE_CONFIG_DIR/setupVars.conf"
-
-# Overwrite the setupVars config file only if it's allowed
-if [ $overwrite_setupvars -eq 1 ]
-then
-	ynh_script_progression --message="Final exports..." --weight=1
-
-	# Verify the checksum of a file, stored by `ynh_store_file_checksum` in the install script.
-	ynh_backup_if_checksum_is_different --file="$setupVars"
-
-	# Get the default network interface
-	main_iface=$(ip route | grep --max-count=1 default | awk '{print $5;}')
-	echo "PIHOLE_INTERFACE=$main_iface" > $setupVars
-	echo "IPV4_ADDRESS=127.0.0.1" >> $setupVars
-	echo "IPV6_ADDRESS=::1" >> $setupVars
-	echo "PIHOLE_DNS_1=" >> $setupVars
-	echo "PIHOLE_DNS_2=" >> $setupVars
-	if [ $query_logging -eq 1 ]; then
-		query_logging=true
-	else
-		query_logging=false
-	fi
-	echo "QUERY_LOGGING=$query_logging" >> $setupVars
-	echo "INSTALL_WEB=true" >> $setupVars
-	echo "BLOCKING_ENABLED=true" >> $setupVars
-
-	# Recalculate and store the checksum of the file for the next upgrade.
-	ynh_store_file_checksum --file="$setupVars"
-fi
-
-#=================================================
-# ENABLING FTL
-#=================================================
-ynh_script_progression --message="Enable FTL..." --weight=1
-
-ynh_exec_warn_less systemctl enable pihole-FTL --quiet
-
 # Replace the service dnsmasq by pihole-FTL
 # That way, YunoHost can continue to use dnsmasq by actually using pihole-FTL
 #ln -sf /run/systemd/generator.late/pihole-FTL.service /etc/systemd/system/dnsmasq.service
@@ -282,85 +156,41 @@ systemctl mask dnsmasq.service
 # Reload systemd config
 systemctl daemon-reload
 
-#=================================================
-# CREATE LOG FILES
-#=================================================
-ynh_script_progression --message="Creating log files..." --weight=1
-
-touch /var/log/{pihole,pihole-FTL}.log
-chmod 644 /var/log/{pihole,pihole-FTL}.log
-dnsmasq_user=$(grep DNSMASQ_USER= /etc/init.d/dnsmasq | cut -d'"' -f2)
-chown $dnsmasq_user:root /var/log/{pihole,pihole-FTL}.log
-
-#=================================================
-# BUILD THE LISTS WITH GRAVITY
-#=================================================
-ynh_script_progression --message="Building the lists with Gravity..." --weight=7
-
-cp -f "../conf/adlists.default" "$PI_HOLE_CONFIG_DIR/adlists.list"
-ynh_exec_warn_less $PI_HOLE_INSTALL_DIR/gravity.sh --force
-
-#=================================================
-# CONFIGURE DNS FOR THE LOCAL DOMAINS
-#=================================================
-ynh_script_progression --message="Configuring DNS for the local domains..." --weight=7
-
-# Find the IP associated to the network interface
-localipv4=$(ip address | grep "${main_iface}\$" | awk '{print $2;}' | cut -d/ -f1)
-
-# List all YunoHost domains
-while read perdomain
-do
-	# Comment domain resolution in /etc/hosts on 127.0.0.1, because they can interfere with the local network resolution.
-	ynh_replace_string --match_string="^127.0.0.1.*$perdomain" --replace_string="#Commented by pihole# &" --target_file=/etc/hosts
-
-	# And add a resolution on the local IP instead
-	grep -q "^$localipv4.*$perdomain" /etc/hosts || \
-		echo "$localipv4	$perdomain #Added by pihole#" >> /etc/hosts
-done <<< "$(yunohost domain list | grep "\." | sed 's/.*: \|.*- //')"
+# Workaround for strings to not be replaced
+a_range="__A_RANGE__"
+b_range="__B_RANGE__"
+gateway="__GATEWAY__"
+ynh_add_config --template="dnsmasq_regenconf_hook" --destination="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
+ynh_exec_warn_less yunohost tools regen-conf dnsmasq
 
 #=================================================
-# SET VERSIONS FOR THE FOOTER OF THE WEB INTERFACE
+# REAPPLY SYSTEM CONFIGURATIONS
 #=================================================
-ynh_script_progression --message="Setting versions for the footer of the web interface..." --weight=1
+ynh_script_progression --message="Upgrading system configurations related to $app..." --weight=1
 
-echo "master master master" > $PI_HOLE_CONFIG_DIR/localbranches
-echo "$(ynh_app_upstream_version) $pihole_adminlte_version $pihole_flt_version" | tee $PI_HOLE_CONFIG_DIR/{GitHubVersions,localversions}  > /dev/null
+# Create a dedicated PHP-FPM config
+ynh_add_fpm_config
 
-#=================================================
-# UPDATE CONF_REGEN HOOK
-#=================================================
-ynh_script_progression --message="Updating conf_regen hook..." --weight=1
+# Create a dedicated NGINX config
+ynh_add_nginx_config
 
-cp ../conf/dnsmasq_regenconf_hook /usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app
-ynh_replace_string --match_string="__APP__" --replace_string="$app" --target_file="/usr/share/yunohost/hooks/conf_regen/50-dnsmasq_$app"
+_add_sudoers_config
 
-systemctl daemon-reload
-ynh_exec_warn_less yunohost tools regen-conf dnsmasq
+_add_cron_jobs
 
-#=================================================
-# GENERIC FINALIZATION
-#=================================================
-# INTEGRATE SERVICE IN YUNOHOST
-#=================================================
-ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
+_add_logrotate_config
 
+install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.service" "/etc/init.d/pihole-FTL"
+ynh_exec_warn_less systemctl enable pihole-FTL --quiet
 yunohost service add pihole-FTL --description="PiHole backend service" --log="/var/log/pihole-FTL.log" --needs_exposed_ports 53 67
 
 #=================================================
 # START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --weight=2
+ynh_script_progression --message="Starting $app's systemd service..." --weight=2
 
 ynh_systemd_action --service_name=pihole-FTL --action=restart --log_path="/var/log/pihole-FTL.log"
 
-#=================================================
-# RELOAD NGINX
-#=================================================
-ynh_script_progression --message="Reloading NGINX web server..." --weight=1
-
-ynh_systemd_action --service_name=nginx --action=reload
-
 #=================================================
 # DEACTIVE MAINTENANCE MODE
 #=================================================

tests.toml

@@ -0,0 +1,32 @@
+#:schema https://raw.githubusercontent.com/YunoHost/apps/master/schemas/tests.v1.schema.json
+
+test_format = 1.0
+
+[default]
+
+    args.query_logging = 1
+    args.enable_dhcp = 0
+
+    # ------------
+    # Tests to run
+    # ------------
+
+    [default.test_upgrade_from.5cc0fe9d7586001602bbaf87084c0ddbbaa041a6]
+    name = "Last packagingv1 version"
+    args.admin = "package_checker"
+    args.domain = "domain.tld"
+    args.path = "/"
+
+    # ; Config_panel
+    #     main.overwrite_files.overwrite_setupvars=0|1
+    #     main.overwrite_files.overwrite_ftl=0|1
+    #     main.overwrite_files.overwrite_nginx=0|1
+    #     main.overwrite_files.overwrite_phpfpm=0|1
+    #     main.global_config.email_type=0|1
+    #     main.php_fpm_config.footprint=low|medium|high
+    #     main.php_fpm_config.free_footprint=20
+    #     main.php_fpm_config.usage=low|medium|high
+    #     main.php_fpm_config.force_max_children=20|0
+
+        # actions=0
+        # config_panel=0