Página Principal Explorar Ajuda
Iniciar Sessão
yunoadmin
/
bambuddy
mirror de https://github.com/maziggy/bambuddy
1
0
Fork 0
Ficheiros Problemas 0 Wiki
Árvore: e0e75da135
Ramos Etiquetas
bambuddy
/
logs
/
9402bed28a854f34ba263a692fccfbaf.log

9402bed28a854f34ba263a692fccfbaf.log 30 KB
Histórico Em bruto

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-05-16 09:57:49,213 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    2. 

  2. 2026-05-16 09:57:49,213 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ctc_info keys: ['temp']
    3. 

  3. 2026-05-16 09:57:49,213 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    4. 

  4. 2026-05-16 09:57:49,213 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    5. 

  5. 2026-05-16 09:57:49,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    6. 

  6. 2026-05-16 09:57:49,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'enable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'enable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    7. 

  7. 2026-05-16 09:57:49,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    8. 

  8. 2026-05-16 09:57:49,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -70dBm
    9. 

  9. 2026-05-16 09:57:49,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    10. 

  10. 2026-05-16 09:57:49,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    11. 

  11. 2026-05-16 09:57:49,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 0.2mm layer, 3 walls, 6% infill
    12. 

  12. 2026-05-16 09:57:49,892 INFO [backend.app.api.routes.camera] [14bd143f] Using RTSP protocol for H2D
    13. 

  13. 2026-05-16 09:57:49,892 INFO [backend.app.api.routes.camera] [14bd143f] Camera viewer attached to printer-2 (subscribers=1)
    14. 

  14. 2026-05-16 09:57:49,893 DEBUG [backend.app.services.camera] [14bd143f] TLS proxy for [IP]:322 listening on [IP]:33133
    15. 

  15. 2026-05-16 09:57:49,893 INFO [backend.app.api.routes.camera] [14bd143f] Starting RTSP camera stream for [IP] (stream_id=2-fanout, model=H2D, fps=15)
    16. 

  16. 2026-05-16 09:57:49,893 DEBUG [backend.app.api.routes.camera] [14bd143f] ffmpeg command: /usr/bin/ffmpeg ... (url hidden)
    17. 

  17. 2026-05-16 09:57:49,938 DEBUG [backend.app.services.camera] [14bd143f] TLS proxy connection to [IP]:322 failed: [Errno 111] Connect call failed ('[IP]', 322)
    18. 

  18. 2026-05-16 09:57:49,994 ERROR [backend.app.api.routes.camera] [14bd143f] ffmpeg failed immediately (attempt 1): [rtsp @ 0x55fc3addb180] Failed reading RTSP data: End of file
    19. 

  19. [in#0 @ 0x55fc3addaec0] Error opening input: Invalid data found when processing input
    20. 

  20. Error opening input file rtsp://[CREDENTIALS]@[IP]:33133/streaming/live/1.
    21. 

  21. Error opening input files: Invalid data found when processing input
    22. 

  22. 2026-05-16 09:57:49,994 INFO [backend.app.api.routes.camera] [14bd143f] Camera stream stopped for [IP] (stream_id=2-fanout)
    23. 

  23. 2026-05-16 09:57:49,995 INFO [backend.app.api.routes.camera] [14bd143f] Camera viewer detached from printer-2 (subscribers=0)
    24. 

  24. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    25. 

  25. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    26. 

  26. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    27. 

  27. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 0.2mm layer, 3 walls, 6% infill
    28. 

  28. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': False, 'power_on_flag': False, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '4', 'tray_is_bbl_bits': 'f', 'tray_now': '2', 'tray_pre': '2', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '2', 'unbind_ams_stat': 0, 'version': 3439}
    29. 

  29. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 2
    30. 

  30. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    31. 

  31. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    32. 

  32. 2026-05-16 09:57:50,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    33. 

  33. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    34. 

  34. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    35. 

  35. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    36. 

  36. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    37. 

  37. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ctc_info keys: ['temp']
    38. 

  38. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    39. 

  39. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    40. 

  40. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    41. 

  41. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'enable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'enable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    42. 

  42. 2026-05-16 09:57:50,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    43. 

  43. 2026-05-16 09:57:50,668 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -70dBm
    44. 

  44. 2026-05-16 09:57:50,668 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    45. 

  45. 2026-05-16 09:57:50,668 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    46. 

  46. 2026-05-16 09:57:50,668 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 0.2mm layer, 3 walls, 6% infill
    47. 

  47. 2026-05-16 09:57:52,072 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    48. 

  48. 2026-05-16 09:57:52,072 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    49. 

  49. 2026-05-16 09:57:52,072 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    50. 

  50. 2026-05-16 09:57:52,072 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 0.2mm layer, 3 walls, 6% infill
    51. 

  51. 2026-05-16 09:57:52,072 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': False, 'power_on_flag': False, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '4', 'tray_is_bbl_bits': 'f', 'tray_now': '2', 'tray_pre': '2', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '2', 'unbind_ams_stat': 0, 'version': 3439}
    52. 

  52. 2026-05-16 09:57:52,072 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 2
    53. 

  53. 2026-05-16 09:57:52,072 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    54. 

  54. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    55. 

  55. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    56. 

  56. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    57. 

  57. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    58. 

  58. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    59. 

  59. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    60. 

  60. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ctc_info keys: ['temp']
    61. 

  61. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    62. 

  62. 2026-05-16 09:57:52,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    63. 

  63. 2026-05-16 09:57:52,074 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    64. 

  64. 2026-05-16 09:57:52,074 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'enable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'enable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    65. 

  65. 2026-05-16 09:57:52,074 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    66. 

  66. 2026-05-16 09:57:52,074 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -70dBm
    67. 

  67. 2026-05-16 09:57:52,074 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    68. 

  68. 2026-05-16 09:57:52,074 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    69. 

  69. 2026-05-16 09:57:52,074 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 0.2mm layer, 3 walls, 6% infill
    70. 

  70. 2026-05-16 09:57:52,891 INFO [backend.app.api.routes.camera] [4e15fb90] Using RTSP protocol for H2D
    71. 

  71. 2026-05-16 09:57:52,891 INFO [backend.app.api.routes.camera] [4e15fb90] Camera viewer attached to printer-2 (subscribers=1)
    72. 

  72. 2026-05-16 09:57:52,892 DEBUG [backend.app.services.camera] [4e15fb90] TLS proxy for [IP]:322 listening on [IP]:45213
    73. 

  73. 2026-05-16 09:57:52,892 INFO [backend.app.api.routes.camera] [4e15fb90] Starting RTSP camera stream for [IP] (stream_id=2-fanout, model=H2D, fps=15)
    74. 

  74. 2026-05-16 09:57:52,892 DEBUG [backend.app.api.routes.camera] [4e15fb90] ffmpeg command: /usr/bin/ffmpeg ... (url hidden)
    75. 

  75. 2026-05-16 09:57:52,934 DEBUG [backend.app.services.camera] [4e15fb90] TLS proxy connection to [IP]:322 failed: [Errno 111] Connect call failed ('[IP]', 322)
    76. 

  76. 2026-05-16 09:57:52,994 ERROR [backend.app.api.routes.camera] [4e15fb90] ffmpeg failed immediately (attempt 1): [rtsp @ 0x55de2fe50180] Failed reading RTSP data: End of file
    77. 

  77. [in#0 @ 0x55de2fe4fec0] Error opening input: Invalid data found when processing input
    78. 

  78. Error opening input file rtsp://[CREDENTIALS]@[IP]:45213/streaming/live/1.
    79. 

  79. Error opening input files: Invalid data found when processing input
    80. 

  80. 2026-05-16 09:57:52,994 INFO [backend.app.api.routes.camera] [4e15fb90] Camera stream stopped for [IP] (stream_id=2-fanout)
    81. 

  81. 2026-05-16 09:57:52,994 INFO [backend.app.api.routes.camera] [4e15fb90] Camera viewer detached from printer-2 (subscribers=0)
    82. 

  82. 2026-05-16 09:57:53,007 INFO [backend.app.api.routes.camera] [cab1bcce] Using RTSP protocol for H2D
    83. 

  83. 2026-05-16 09:57:53,007 INFO [backend.app.api.routes.camera] [cab1bcce] Camera viewer attached to printer-2 (subscribers=1)
    84. 

  84. 2026-05-16 09:57:53,008 DEBUG [backend.app.services.camera] [cab1bcce] TLS proxy for [IP]:322 listening on [IP]:41039
    85. 

  85. 2026-05-16 09:57:53,008 INFO [backend.app.api.routes.camera] [cab1bcce] Starting RTSP camera stream for [IP] (stream_id=2-fanout, model=H2D, fps=15)
    86. 

  86. 2026-05-16 09:57:53,008 DEBUG [backend.app.api.routes.camera] [cab1bcce] ffmpeg command: /usr/bin/ffmpeg ... (url hidden)
    87. 

  87. 2026-05-16 09:57:53,047 DEBUG [backend.app.services.camera] [cab1bcce] TLS proxy connection to [IP]:322 failed: [Errno 111] Connect call failed ('[IP]', 322)
    88. 

  88. 2026-05-16 09:57:53,110 ERROR [backend.app.api.routes.camera] [cab1bcce] ffmpeg failed immediately (attempt 1): [rtsp @ 0x55da6ef94180] Failed reading RTSP data: End of file
    89. 

  89. [in#0 @ 0x55da6ef93ec0] Error opening input: Invalid data found when processing input
    90. 

  90. Error opening input file rtsp://[CREDENTIALS]@[IP]:41039/streaming/live/1.
    91. 

  91. Error opening input files: Invalid data found when processing input
    92. 

  92. 2026-05-16 09:57:53,110 INFO [backend.app.api.routes.camera] [cab1bcce] Camera stream stopped for [IP] (stream_id=2-fanout)
    93. 

  93. 2026-05-16 09:57:53,110 INFO [backend.app.api.routes.camera] [cab1bcce] Camera viewer detached from printer-2 (subscribers=0)
    94. 

  94. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    95. 

  95. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    96. 

  96. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    97. 

  97. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 0.2mm layer, 3 walls, 6% infill
    98. 

  98. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': False, 'power_on_flag': False, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '4', 'tray_is_bbl_bits': 'f', 'tray_now': '2', 'tray_pre': '2', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '2', 'unbind_ams_stat': 0, 'version': 3439}
    99. 

  99. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 2
    100. 

  100. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    101. 

  101. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    102. 

  102. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    103. 

  103. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    104. 

  104. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    105. 

  105. 2026-05-16 09:57:53,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    106. 

  106. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    107. 

  107. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ctc_info keys: ['temp']
    108. 

  108. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    109. 

  109. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    110. 

  110. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    111. 

  111. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'enable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'enable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    112. 

  112. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    113. 

  113. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -70dBm
    114. 

  114. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    115. 

  115. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    116. 

  116. 2026-05-16 09:57:53,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 0.2mm layer, 3 walls, 6% infill
    117. 

  117. 2026-05-16 09:57:54,009 INFO [backend.app.api.routes.camera] [61613f2f] Using RTSP protocol for H2D
    118. 

  118. 2026-05-16 09:57:54,010 INFO [backend.app.api.routes.camera] [61613f2f] Camera viewer attached to printer-2 (subscribers=1)
    119. 

  119. 2026-05-16 09:57:54,011 DEBUG [backend.app.services.camera] [61613f2f] TLS proxy for [IP]:322 listening on [IP]:39251
    120. 

  120. 2026-05-16 09:57:54,011 INFO [backend.app.api.routes.camera] [61613f2f] Starting RTSP camera stream for [IP] (stream_id=2-fanout, model=H2D, fps=15)
    121. 

  121. 2026-05-16 09:57:54,011 DEBUG [backend.app.api.routes.camera] [61613f2f] ffmpeg command: /usr/bin/ffmpeg ... (url hidden)
    122. 

  122. 2026-05-16 09:57:54,050 DEBUG [backend.app.services.camera] [61613f2f] TLS proxy connection to [IP]:322 failed: [Errno 111] Connect call failed ('[IP]', 322)
    123. 

  123. 2026-05-16 09:57:54,112 ERROR [backend.app.api.routes.camera] [61613f2f] ffmpeg failed immediately (attempt 1): [rtsp @ 0x5612d0016180] Failed reading RTSP data: End of file
    124. 

  124. [in#0 @ 0x5612d0015ec0] Error opening input: Invalid data found when processing input
    125. 

  125. Error opening input file rtsp://[CREDENTIALS]@[IP]:39251/streaming/live/1.
    126. 

  126. Error opening input files: Invalid data found when processing input
    127. 

  127. 2026-05-16 09:57:54,113 INFO [backend.app.api.routes.camera] [61613f2f] Camera stream stopped for [IP] (stream_id=2-fanout)
    128. 

  128. 2026-05-16 09:57:54,113 INFO [backend.app.api.routes.camera] [61613f2f] Camera viewer detached from printer-2 (subscribers=0)
    129. 

  129. 2026-05-16 09:57:54,120 INFO [uvicorn.access] [-] [IP]:51857 - "POST /api/v1/printers/camera/stream-token HTTP/1.1" 200
    130. 

  130. 2026-05-16 09:57:54,127 INFO [backend.app.api.routes.camera] [400be9f9] Using RTSP protocol for H2D
    131. 

  131. 2026-05-16 09:57:54,127 INFO [backend.app.api.routes.camera] [400be9f9] Camera viewer attached to printer-2 (subscribers=1)
    132. 

  132. 2026-05-16 09:57:54,127 INFO [backend.app.api.routes.printers] [ea3e3eda] Cover: resolved plate 1 before download (subtask=0.2mm layer, 3 walls, 6% infill)
    133. 

  133. 2026-05-16 09:57:54,128 DEBUG [backend.app.services.camera] [400be9f9] TLS proxy for [IP]:322 listening on [IP]:41619
    134. 

  134. 2026-05-16 09:57:54,128 INFO [backend.app.api.routes.camera] [400be9f9] Starting RTSP camera stream for [IP] (stream_id=2-fanout, model=H2D, fps=15)
    135. 

  135. 2026-05-16 09:57:54,128 DEBUG [backend.app.api.routes.camera] [400be9f9] ffmpeg command: /usr/bin/ffmpeg ... (url hidden)
    136. 

  136. 2026-05-16 09:57:54,171 DEBUG [backend.app.services.camera] [400be9f9] TLS proxy connection to [IP]:322 failed: [Errno 111] Connect call failed ('[IP]', 322)
    137. 

  137. 2026-05-16 09:57:54,230 ERROR [backend.app.api.routes.camera] [400be9f9] ffmpeg failed immediately (attempt 1): [rtsp @ 0x5587bf9ca180] Failed reading RTSP data: End of file
    138. 

  138. [in#0 @ 0x5587bf9c9ec0] Error opening input: Invalid data found when processing input
    139. 

  139. Error opening input file rtsp://[CREDENTIALS]@[IP]:41619/streaming/live/1.
    140. 

  140. Error opening input files: Invalid data found when processing input
    141. 

  141. 2026-05-16 09:57:54,230 INFO [backend.app.api.routes.camera] [400be9f9] Camera stream stopped for [IP] (stream_id=2-fanout)
    142. 

  142. 2026-05-16 09:57:54,231 INFO [backend.app.api.routes.camera] [400be9f9] Camera viewer detached from printer-2 (subscribers=0)
    143. 

  143. 2026-05-16 09:57:54,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    144. 

  144. 2026-05-16 09:57:54,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    145. 

  145. 2026-05-16 09:57:54,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    146. 

  146. 2026-05-16 09:57:54,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 0.2mm layer, 3 walls, 6% infill
    147. 

  147. 2026-05-16 09:57:54,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': False, 'power_on_flag': False, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '4', 'tray_is_bbl_bits': 'f', 'tray_now': '2', 'tray_pre': '2', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '2', 'unbind_ams_stat': 0, 'version': 3439}
    148. 

  148. 2026-05-16 09:57:54,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 2
    149. 

  149. 2026-05-16 09:57:54,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    150. 

  150. 2026-05-16 09:57:54,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    151. 

  151. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    152. 

  152. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    153. 

  153. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    154. 

  154. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    155. 

  155. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    156. 

  156. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ctc_info keys: ['temp']
    157. 

  157. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    158. 

  158. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    159. 

  159. 2026-05-16 09:57:54,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    160. 

  160. 2026-05-16 09:57:54,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'enable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'enable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    161. 

  161. 2026-05-16 09:57:54,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    162. 

  162. 2026-05-16 09:57:54,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -70dBm
    163. 

  163. 2026-05-16 09:57:54,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    164. 

  164. 2026-05-16 09:57:54,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    165. 

  165. 2026-05-16 09:57:54,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 0.2mm layer, 3 walls, 6% infill
    166. 

  166. 2026-05-16 09:57:54,894 INFO [backend.app.api.routes.camera] [00cccc66] Using RTSP protocol for H2D
    167. 

  167. 2026-05-16 09:57:54,894 INFO [backend.app.api.routes.camera] [00cccc66] Camera viewer attached to printer-2 (subscribers=1)
    168. 

  168. 2026-05-16 09:57:54,895 DEBUG [backend.app.services.camera] [00cccc66] TLS proxy for [IP]:322 listening on [IP]:41207
    169. 

  169. 2026-05-16 09:57:54,895 INFO [backend.app.api.routes.camera] [00cccc66] Starting RTSP camera stream for [IP] (stream_id=2-fanout, model=H2D, fps=15)
    170. 

  170. 2026-05-16 09:57:54,895 DEBUG [backend.app.api.routes.camera] [00cccc66] ffmpeg command: /usr/bin/ffmpeg ... (url hidden)
    171. 

  171. 2026-05-16 09:57:54,938 DEBUG [backend.app.services.camera] [00cccc66] TLS proxy connection to [IP]:322 failed: [Errno 111] Connect call failed ('[IP]', 322)
    172. 

  172. 2026-05-16 09:57:54,997 ERROR [backend.app.api.routes.camera] [00cccc66] ffmpeg failed immediately (attempt 1): [rtsp @ 0x55d36bbcb180] Failed reading RTSP data: End of file
    173. 

  173. [in#0 @ 0x55d36bbcaec0] Error opening input: Invalid data found when processing input
    174. 

  174. Error opening input file rtsp://[CREDENTIALS]@[IP]:41207/streaming/live/1.
    175. 

  175. Error opening input files: Invalid data found when processing input
    176. 

  176. 2026-05-16 09:57:54,997 INFO [backend.app.api.routes.camera] [00cccc66] Camera stream stopped for [IP] (stream_id=2-fanout)
    177. 

  177. 2026-05-16 09:57:54,998 INFO [backend.app.api.routes.camera] [00cccc66] Camera viewer detached from printer-2 (subscribers=0)
    178. 

  178. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    179. 

  179. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    180. 

  180. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    181. 

  181. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 0.2mm layer, 3 walls, 6% infill
    182. 

  182. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': False, 'power_on_flag': False, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '4', 'tray_is_bbl_bits': 'f', 'tray_now': '2', 'tray_pre': '2', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '2', 'unbind_ams_stat': 0, 'version': 3439}
    183. 

  183. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 2
    184. 

  184. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    185. 

  185. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    186. 

  186. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    187. 

  187. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    188. 

  188. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    189. 

  189. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    190. 

  190. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    191. 

  191. 2026-05-16 09:57:56,432 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ctc_info keys: ['temp']
    192. 

  192. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    193. 

  193. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    194. 

  194. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    195. 

  195. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'enable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'enable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    196. 

  196. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    197. 

  197. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -70dBm
    198. 

  198. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    199. 

  199. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    200. 

  200. 2026-05-16 09:57:56,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 0.2mm layer, 3 walls, 6% infill
    201.