Accueil Explorer Aide
Connexion
yunoadmin
/
bambuddy
miroir de https://github.com/maziggy/bambuddy
1
0
Fork 0
Fichiers Tickets 0 Wiki
Aborescence: d10cc2cd3a
Branches Tags
bambuddy
/
logs
/
09d3a89224414ed5ab4d924fb5574a72.log

09d3a89224414ed5ab4d924fb5574a72.log 35 KB
Historique Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-04-20 19:26:59,190 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    2. 

  2. 2026-04-20 19:26:59,190 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    3. 

  3. 2026-04-20 19:26:59,191 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    4. 

  4. 2026-04-20 19:26:59,191 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    5. 

  5. 2026-04-20 19:26:59,191 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    6. 

  6. 2026-04-20 19:26:59,191 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    7. 

  7. 2026-04-20 19:26:59,191 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    8. 

  8. 2026-04-20 19:26:59,191 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    9. 

  9. 2026-04-20 19:26:59,191 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    10. 

  10. 2026-04-20 19:26:59,192 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    11. 

  11. 2026-04-20 19:26:59,192 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    12. 

  12. 2026-04-20 19:26:59,192 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    13. 

  13. 2026-04-20 19:26:59,192 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    14. 

  14. 2026-04-20 19:26:59,192 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    15. 

  15. 2026-04-20 19:26:59,192 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    16. 

  16. 2026-04-20 19:26:59,192 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36438016, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    17. 

  17. 2026-04-20 19:26:59,192 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    18. 

  18. 2026-04-20 19:26:59,193 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    19. 

  19. 2026-04-20 19:26:59,193 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    20. 

  20. 2026-04-20 19:26:59,193 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    21. 

  21. 2026-04-20 19:26:59,575 INFO [backend.app.api.routes.camera] Using RTSP protocol for X2D
    22. 

  22. 2026-04-20 19:26:59,576 DEBUG [backend.app.services.camera] TLS proxy for [IP]:322 listening on [IP]:39415
    23. 

  23. 2026-04-20 19:26:59,576 INFO [backend.app.api.routes.camera] Starting RTSP camera stream for [IP] (stream_id=2-0efdf40f, model=X2D, fps=15)
    24. 

  24. 2026-04-20 19:26:59,577 DEBUG [backend.app.api.routes.camera] ffmpeg command: /usr/bin/ffmpeg ... (url hidden)
    25. 

  25. 2026-04-20 19:26:59,618 DEBUG [backend.app.services.camera] TLS proxy connection to [IP]:322 failed: [Errno 111] Connect call failed ('[IP]', 322)
    26. 

  26. 2026-04-20 19:26:59,647 DEBUG [backend.app.main] [[PRINTER]] Runtime tracking: added 30s, total=171614s (47.67h)
    27. 

  27. 2026-04-20 19:26:59,649 DEBUG [backend.app.main] Updated runtime for 1 printer(s)
    28. 

  28. 2026-04-20 19:26:59,678 ERROR [backend.app.api.routes.camera] ffmpeg failed immediately (attempt 1): [in#0 @ 0x5611adb12ec0] Error opening input: Invalid data found when processing input
    29. 

  29. Error opening input file rtsp://[CREDENTIALS]@[IP]:39415/streaming/live/1.
    30. 

  30. Error opening input files: Invalid data found when processing input
    31. 

  31. 2026-04-20 19:26:59,679 INFO [backend.app.api.routes.camera] Camera stream stopped for [IP] (stream_id=2-0efdf40f)
    32. 

  32. 2026-04-20 19:27:00,501 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    33. 

  33. 2026-04-20 19:27:00,502 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    34. 

  34. 2026-04-20 19:27:00,502 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    35. 

  35. 2026-04-20 19:27:00,502 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    36. 

  36. 2026-04-20 19:27:00,502 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    37. 

  37. 2026-04-20 19:27:00,503 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    38. 

  38. 2026-04-20 19:27:00,503 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    39. 

  39. 2026-04-20 19:27:00,503 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    40. 

  40. 2026-04-20 19:27:00,503 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    41. 

  41. 2026-04-20 19:27:00,503 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    42. 

  42. 2026-04-20 19:27:00,503 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    43. 

  43. 2026-04-20 19:27:00,503 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    44. 

  44. 2026-04-20 19:27:00,504 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    45. 

  45. 2026-04-20 19:27:00,504 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    46. 

  46. 2026-04-20 19:27:00,504 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    47. 

  47. 2026-04-20 19:27:00,504 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36437248, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    48. 

  48. 2026-04-20 19:27:00,504 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    49. 

  49. 2026-04-20 19:27:00,504 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    50. 

  50. 2026-04-20 19:27:00,504 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    51. 

  51. 2026-04-20 19:27:00,504 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    52. 

  52. 2026-04-20 19:27:01,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    53. 

  53. 2026-04-20 19:27:01,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    54. 

  54. 2026-04-20 19:27:01,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    55. 

  55. 2026-04-20 19:27:01,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    56. 

  56. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    57. 

  57. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    58. 

  58. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    59. 

  59. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    60. 

  60. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    61. 

  61. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    62. 

  62. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    63. 

  63. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    64. 

  64. 2026-04-20 19:27:01,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    65. 

  65. 2026-04-20 19:27:01,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    66. 

  66. 2026-04-20 19:27:01,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    67. 

  67. 2026-04-20 19:27:01,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36437248, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    68. 

  68. 2026-04-20 19:27:01,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    69. 

  69. 2026-04-20 19:27:01,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    70. 

  70. 2026-04-20 19:27:01,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    71. 

  71. 2026-04-20 19:27:01,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    72. 

  72. 2026-04-20 19:27:02,940 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    73. 

  73. 2026-04-20 19:27:02,940 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    74. 

  74. 2026-04-20 19:27:02,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    75. 

  75. 2026-04-20 19:27:02,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    76. 

  76. 2026-04-20 19:27:02,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    77. 

  77. 2026-04-20 19:27:02,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    78. 

  78. 2026-04-20 19:27:02,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    79. 

  79. 2026-04-20 19:27:02,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    80. 

  80. 2026-04-20 19:27:02,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    81. 

  81. 2026-04-20 19:27:02,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    82. 

  82. 2026-04-20 19:27:02,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    83. 

  83. 2026-04-20 19:27:02,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    84. 

  84. 2026-04-20 19:27:02,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    85. 

  85. 2026-04-20 19:27:02,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    86. 

  86. 2026-04-20 19:27:02,943 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    87. 

  87. 2026-04-20 19:27:02,943 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36436480, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    88. 

  88. 2026-04-20 19:27:02,943 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    89. 

  89. 2026-04-20 19:27:02,943 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    90. 

  90. 2026-04-20 19:27:02,943 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    91. 

  91. 2026-04-20 19:27:02,943 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    92. 

  92. 2026-04-20 19:27:03,953 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    93. 

  93. 2026-04-20 19:27:03,954 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    94. 

  94. 2026-04-20 19:27:03,954 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    95. 

  95. 2026-04-20 19:27:03,954 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    96. 

  96. 2026-04-20 19:27:03,954 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    97. 

  97. 2026-04-20 19:27:03,954 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    98. 

  98. 2026-04-20 19:27:03,954 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    99. 

  99. 2026-04-20 19:27:03,954 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    100. 

  100. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    101. 

  101. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    102. 

  102. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    103. 

  103. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    104. 

  104. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    105. 

  105. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    106. 

  106. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    107. 

  107. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36436480, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    108. 

  108. 2026-04-20 19:27:03,955 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    109. 

  109. 2026-04-20 19:27:03,956 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    110. 

  110. 2026-04-20 19:27:03,956 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    111. 

  111. 2026-04-20 19:27:03,956 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    112. 

  112. 2026-04-20 19:27:05,055 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    113. 

  113. 2026-04-20 19:27:05,056 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    114. 

  114. 2026-04-20 19:27:05,056 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    115. 

  115. 2026-04-20 19:27:05,056 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    116. 

  116. 2026-04-20 19:27:05,056 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    117. 

  117. 2026-04-20 19:27:05,056 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    118. 

  118. 2026-04-20 19:27:05,056 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    119. 

  119. 2026-04-20 19:27:05,056 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    120. 

  120. 2026-04-20 19:27:05,056 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    121. 

  121. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    122. 

  122. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    123. 

  123. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    124. 

  124. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    125. 

  125. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    126. 

  126. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    127. 

  127. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36435712, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    128. 

  128. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    129. 

  129. 2026-04-20 19:27:05,057 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    130. 

  130. 2026-04-20 19:27:05,058 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    131. 

  131. 2026-04-20 19:27:05,058 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    132. 

  132. 2026-04-20 19:27:06,379 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    133. 

  133. 2026-04-20 19:27:06,379 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    134. 

  134. 2026-04-20 19:27:06,380 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    135. 

  135. 2026-04-20 19:27:06,380 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    136. 

  136. 2026-04-20 19:27:06,380 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    137. 

  137. 2026-04-20 19:27:06,380 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    138. 

  138. 2026-04-20 19:27:06,380 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    139. 

  139. 2026-04-20 19:27:06,380 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    140. 

  140. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    141. 

  141. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    142. 

  142. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    143. 

  143. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    144. 

  144. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    145. 

  145. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    146. 

  146. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    147. 

  147. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36434688, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    148. 

  148. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    149. 

  149. 2026-04-20 19:27:06,381 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    150. 

  150. 2026-04-20 19:27:06,382 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    151. 

  151. 2026-04-20 19:27:06,382 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    152. 

  152. 2026-04-20 19:27:07,776 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    153. 

  153. 2026-04-20 19:27:07,776 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    154. 

  154. 2026-04-20 19:27:07,777 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    155. 

  155. 2026-04-20 19:27:07,777 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    156. 

  156. 2026-04-20 19:27:07,777 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    157. 

  157. 2026-04-20 19:27:07,777 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    158. 

  158. 2026-04-20 19:27:07,777 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    159. 

  159. 2026-04-20 19:27:07,777 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    160. 

  160. 2026-04-20 19:27:07,777 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    161. 

  161. 2026-04-20 19:27:07,777 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    162. 

  162. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    163. 

  163. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    164. 

  164. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    165. 

  165. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    166. 

  166. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    167. 

  167. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36434688, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    168. 

  168. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    169. 

  169. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    170. 

  170. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    171. 

  171. 2026-04-20 19:27:07,778 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    172. 

  172. 2026-04-20 19:27:07,838 INFO [backend.app.api.routes.camera] Using RTSP protocol for X2D
    173. 

  173. 2026-04-20 19:27:07,839 DEBUG [backend.app.services.camera] TLS proxy for [IP]:322 listening on [IP]:35953
    174. 

  174. 2026-04-20 19:27:07,839 INFO [backend.app.api.routes.camera] Starting RTSP camera stream for [IP] (stream_id=2-e73be8b6, model=X2D, fps=15)
    175. 

  175. 2026-04-20 19:27:07,839 DEBUG [backend.app.api.routes.camera] ffmpeg command: /usr/bin/ffmpeg ... (url hidden)
    176. 

  176. 2026-04-20 19:27:07,879 DEBUG [backend.app.services.camera] TLS proxy connection to [IP]:322 failed: [Errno 111] Connect call failed ('[IP]', 322)
    177. 

  177. 2026-04-20 19:27:07,941 ERROR [backend.app.api.routes.camera] ffmpeg failed immediately (attempt 1): [in#0 @ 0x5598b7e1eec0] Error opening input: Invalid data found when processing input
    178. 

  178. Error opening input file rtsp://[CREDENTIALS]@[IP]:35953/streaming/live/1.
    179. 

  179. Error opening input files: Invalid data found when processing input
    180. 

  180. 2026-04-20 19:27:07,941 INFO [backend.app.api.routes.camera] Camera stream stopped for [IP] (stream_id=2-e73be8b6)
    181. 

  181. 2026-04-20 19:27:08,892 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    182. 

  182. 2026-04-20 19:27:08,892 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    183. 

  183. 2026-04-20 19:27:08,892 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    184. 

  184. 2026-04-20 19:27:08,892 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Calibration_Cube_for_flow
    185. 

  185. 2026-04-20 19:27:08,893 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [2, 9, 3, 4], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'ff', 'tray_hall_out_bits': '80', 'tray_is_bbl_bits': 'ff', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'ff', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 572}
    186. 

  186. 2026-04-20 19:27:08,893 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 7
    187. 

  187. 2026-04-20 19:27:08,893 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 3 new units, 3 total
    188. 

  188. 2026-04-20 19:27:08,893 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    189. 

  189. 2026-04-20 19:27:08,893 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    190. 

  190. 2026-04-20 19:27:08,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    191. 

  191. 2026-04-20 19:27:08,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 29°C (heater OFF)
    192. 

  192. 2026-04-20 19:27:08,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    193. 

  193. 2026-04-20 19:27:08,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    194. 

  194. 2026-04-20 19:27:08,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    195. 

  195. 2026-04-20 19:27:08,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 28038, 'ts_unix': '20260420012216'}]
    196. 

  196. 2026-04-20 19:27:08,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 36434176, 'tl_external_total_kb': 120121472, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    197. 

  197. 2026-04-20 19:27:08,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    198. 

  198. 2026-04-20 19:27:08,895 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    199. 

  199. 2026-04-20 19:27:08,895 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 259, 259]
    200. 

  200. 2026-04-20 19:27:08,895 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Calibration_Cube_for_flow
    201.