Главная Обзор Помощь
Вход
yunoadmin
/
bambuddy
зеркало из https://github.com/maziggy/bambuddy
1
0
Ответвить 0
Файлы Задачи 0 Вики
Ветка: bug-report-assets
Ветки Метки
bambuddy
/
logs
/
f58cfb6c3e1549268c8cf9e0e4f00a26.log

f58cfb6c3e1549268c8cf9e0e4f00a26.log 35 KB
Постоянная ссылка История Исходник

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-09-06 16:12:57,735 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    2. 

  2. 2026-09-06 16:12:58,764 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    3. 

  3. 2026-09-06 16:12:58,764 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    4. 

  4. 2026-09-06 16:12:58,765 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    5. 

  5. 2026-09-06 16:12:58,765 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    6. 

  6. 2026-09-06 16:12:58,765 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    7. 

  7. 2026-09-06 16:12:58,765 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    8. 

  8. 2026-09-06 16:12:58,766 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    9. 

  9. 2026-09-06 16:12:58,766 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    10. 

  10. 2026-09-06 16:12:58,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    11. 

  11. 2026-09-06 16:12:59,800 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    12. 

  12. 2026-09-06 16:12:59,800 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    13. 

  13. 2026-09-06 16:12:59,800 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    14. 

  14. 2026-09-06 16:12:59,801 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    15. 

  15. 2026-09-06 16:12:59,801 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    16. 

  16. 2026-09-06 16:12:59,802 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    17. 

  17. 2026-09-06 16:12:59,802 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    18. 

  18. 2026-09-06 16:12:59,803 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    19. 

  19. 2026-09-06 16:12:59,803 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    20. 

  20. 2026-09-06 16:13:00,678 DEBUG [backend.app.main] [-] Recorded 3 printer sensor history entries
    21. 

  21. 2026-09-06 16:13:00,828 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    22. 

  22. 2026-09-06 16:13:00,829 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    23. 

  23. 2026-09-06 16:13:00,829 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    24. 

  24. 2026-09-06 16:13:00,829 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    25. 

  25. 2026-09-06 16:13:00,830 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    26. 

  26. 2026-09-06 16:13:00,830 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    27. 

  27. 2026-09-06 16:13:00,830 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    28. 

  28. 2026-09-06 16:13:00,831 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    29. 

  29. 2026-09-06 16:13:00,831 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    30. 

  30. 2026-09-06 16:13:01,841 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    31. 

  31. 2026-09-06 16:13:01,842 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    32. 

  32. 2026-09-06 16:13:01,842 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    33. 

  33. 2026-09-06 16:13:01,842 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    34. 

  34. 2026-09-06 16:13:01,843 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    35. 

  35. 2026-09-06 16:13:01,843 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    36. 

  36. 2026-09-06 16:13:01,843 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    37. 

  37. 2026-09-06 16:13:01,845 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    38. 

  38. 2026-09-06 16:13:01,846 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    39. 

  39. 2026-09-06 16:13:02,847 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    40. 

  40. 2026-09-06 16:13:02,848 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    41. 

  41. 2026-09-06 16:13:02,848 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    42. 

  42. 2026-09-06 16:13:02,848 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    43. 

  43. 2026-09-06 16:13:02,849 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    44. 

  44. 2026-09-06 16:13:02,849 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    45. 

  45. 2026-09-06 16:13:02,850 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    46. 

  46. 2026-09-06 16:13:02,850 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    47. 

  47. 2026-09-06 16:13:02,851 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    48. 

  48. 2026-09-06 16:13:03,880 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    49. 

  49. 2026-09-06 16:13:03,881 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    50. 

  50. 2026-09-06 16:13:03,881 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    51. 

  51. 2026-09-06 16:13:03,882 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    52. 

  52. 2026-09-06 16:13:03,882 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    53. 

  53. 2026-09-06 16:13:03,882 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    54. 

  54. 2026-09-06 16:13:03,883 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    55. 

  55. 2026-09-06 16:13:03,884 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    56. 

  56. 2026-09-06 16:13:03,884 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    57. 

  57. 2026-09-06 16:13:04,894 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    58. 

  58. 2026-09-06 16:13:04,894 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    59. 

  59. 2026-09-06 16:13:04,894 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    60. 

  60. 2026-09-06 16:13:04,895 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    61. 

  61. 2026-09-06 16:13:04,895 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    62. 

  62. 2026-09-06 16:13:04,895 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    63. 

  63. 2026-09-06 16:13:04,896 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    64. 

  64. 2026-09-06 16:13:04,896 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    65. 

  65. 2026-09-06 16:13:04,897 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    66. 

  66. 2026-09-06 16:13:05,924 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    67. 

  67. 2026-09-06 16:13:05,924 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    68. 

  68. 2026-09-06 16:13:05,924 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    69. 

  69. 2026-09-06 16:13:05,925 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    70. 

  70. 2026-09-06 16:13:05,925 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    71. 

  71. 2026-09-06 16:13:05,925 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    72. 

  72. 2026-09-06 16:13:05,926 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    73. 

  73. 2026-09-06 16:13:05,926 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    74. 

  74. 2026-09-06 16:13:05,927 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    75. 

  75. 2026-09-06 16:13:06,940 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    76. 

  76. 2026-09-06 16:13:06,940 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    77. 

  77. 2026-09-06 16:13:06,942 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    78. 

  78. 2026-09-06 16:13:06,943 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    79. 

  79. 2026-09-06 16:13:06,943 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    80. 

  80. 2026-09-06 16:13:06,943 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    81. 

  81. 2026-09-06 16:13:06,943 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    82. 

  82. 2026-09-06 16:13:06,944 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    83. 

  83. 2026-09-06 16:13:06,944 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    84. 

  84. 2026-09-06 16:13:07,963 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    85. 

  85. 2026-09-06 16:13:07,963 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    86. 

  86. 2026-09-06 16:13:07,963 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    87. 

  87. 2026-09-06 16:13:07,964 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    88. 

  88. 2026-09-06 16:13:07,964 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    89. 

  89. 2026-09-06 16:13:07,964 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    90. 

  90. 2026-09-06 16:13:07,965 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    91. 

  91. 2026-09-06 16:13:07,965 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    92. 

  92. 2026-09-06 16:13:07,966 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    93. 

  93. 2026-09-06 16:13:08,991 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    94. 

  94. 2026-09-06 16:13:08,991 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    95. 

  95. 2026-09-06 16:13:08,991 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    96. 

  96. 2026-09-06 16:13:08,992 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    97. 

  97. 2026-09-06 16:13:08,992 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    98. 

  98. 2026-09-06 16:13:08,992 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    99. 

  99. 2026-09-06 16:13:08,993 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    100. 

  100. 2026-09-06 16:13:08,993 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    101. 

  101. 2026-09-06 16:13:08,993 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    102. 

  102. 2026-09-06 16:13:10,015 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    103. 

  103. 2026-09-06 16:13:10,015 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    104. 

  104. 2026-09-06 16:13:10,015 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    105. 

  105. 2026-09-06 16:13:10,016 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    106. 

  106. 2026-09-06 16:13:10,016 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    107. 

  107. 2026-09-06 16:13:10,016 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    108. 

  108. 2026-09-06 16:13:10,017 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    109. 

  109. 2026-09-06 16:13:10,017 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    110. 

  110. 2026-09-06 16:13:10,018 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    111. 

  111. 2026-09-06 16:13:11,033 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    112. 

  112. 2026-09-06 16:13:11,033 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    113. 

  113. 2026-09-06 16:13:11,034 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    114. 

  114. 2026-09-06 16:13:11,034 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    115. 

  115. 2026-09-06 16:13:11,034 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    116. 

  116. 2026-09-06 16:13:11,034 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    117. 

  117. 2026-09-06 16:13:11,035 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    118. 

  118. 2026-09-06 16:13:11,035 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    119. 

  119. 2026-09-06 16:13:11,035 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    120. 

  120. 2026-09-06 16:13:12,057 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    121. 

  121. 2026-09-06 16:13:12,057 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    122. 

  122. 2026-09-06 16:13:12,058 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    123. 

  123. 2026-09-06 16:13:12,058 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    124. 

  124. 2026-09-06 16:13:12,058 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    125. 

  125. 2026-09-06 16:13:12,058 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    126. 

  126. 2026-09-06 16:13:12,059 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    127. 

  127. 2026-09-06 16:13:12,060 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    128. 

  128. 2026-09-06 16:13:12,061 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    129. 

  129. 2026-09-06 16:13:13,056 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    130. 

  130. 2026-09-06 16:13:13,056 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    131. 

  131. 2026-09-06 16:13:13,056 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    132. 

  132. 2026-09-06 16:13:13,057 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    133. 

  133. 2026-09-06 16:13:13,057 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    134. 

  134. 2026-09-06 16:13:13,057 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    135. 

  135. 2026-09-06 16:13:13,058 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    136. 

  136. 2026-09-06 16:13:13,058 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    137. 

  137. 2026-09-06 16:13:13,059 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    138. 

  138. 2026-09-06 16:13:14,074 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    139. 

  139. 2026-09-06 16:13:14,075 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    140. 

  140. 2026-09-06 16:13:14,075 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    141. 

  141. 2026-09-06 16:13:14,075 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    142. 

  142. 2026-09-06 16:13:14,076 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    143. 

  143. 2026-09-06 16:13:14,076 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    144. 

  144. 2026-09-06 16:13:14,076 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    145. 

  145. 2026-09-06 16:13:14,077 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    146. 

  146. 2026-09-06 16:13:14,078 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    147. 

  147. 2026-09-06 16:13:15,160 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    148. 

  148. 2026-09-06 16:13:15,160 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    149. 

  149. 2026-09-06 16:13:15,161 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    150. 

  150. 2026-09-06 16:13:15,161 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    151. 

  151. 2026-09-06 16:13:15,161 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    152. 

  152. 2026-09-06 16:13:15,162 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    153. 

  153. 2026-09-06 16:13:15,162 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    154. 

  154. 2026-09-06 16:13:15,163 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    155. 

  155. 2026-09-06 16:13:15,164 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    156. 

  156. 2026-09-06 16:13:16,118 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    157. 

  157. 2026-09-06 16:13:16,118 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    158. 

  158. 2026-09-06 16:13:16,119 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    159. 

  159. 2026-09-06 16:13:16,119 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    160. 

  160. 2026-09-06 16:13:16,119 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    161. 

  161. 2026-09-06 16:13:16,119 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    162. 

  162. 2026-09-06 16:13:16,120 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    163. 

  163. 2026-09-06 16:13:16,120 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    164. 

  164. 2026-09-06 16:13:16,121 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    165. 

  165. 2026-09-06 16:13:17,146 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    166. 

  166. 2026-09-06 16:13:17,147 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    167. 

  167. 2026-09-06 16:13:17,147 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    168. 

  168. 2026-09-06 16:13:17,147 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    169. 

  169. 2026-09-06 16:13:17,149 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    170. 

  170. 2026-09-06 16:13:17,149 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    171. 

  171. 2026-09-06 16:13:17,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    172. 

  172. 2026-09-06 16:13:17,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    173. 

  173. 2026-09-06 16:13:17,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    174. 

  174. 2026-09-06 16:13:18,153 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    175. 

  175. 2026-09-06 16:13:18,153 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    176. 

  176. 2026-09-06 16:13:18,153 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    177. 

  177. 2026-09-06 16:13:18,153 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    178. 

  178. 2026-09-06 16:13:18,154 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    179. 

  179. 2026-09-06 16:13:18,154 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    180. 

  180. 2026-09-06 16:13:18,155 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    181. 

  181. 2026-09-06 16:13:18,155 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    182. 

  182. 2026-09-06 16:13:18,156 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    183. 

  183. 2026-09-06 16:13:19,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    184. 

  184. 2026-09-06 16:13:19,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    185. 

  185. 2026-09-06 16:13:19,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    186. 

  186. 2026-09-06 16:13:19,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    187. 

  187. 2026-09-06 16:13:19,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    188. 

  188. 2026-09-06 16:13:19,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    189. 

  189. 2026-09-06 16:13:19,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    190. 

  190. 2026-09-06 16:13:19,188 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    191. 

  191. 2026-09-06 16:13:19,189 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    192. 

  192. 2026-09-06 16:13:20,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    193. 

  193. 2026-09-06 16:13:20,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    194. 

  194. 2026-09-06 16:13:20,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Labrax_19-inch_crossbrace_set(2)
    195. 

  195. 2026-09-06 16:13:20,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    196. 

  196. 2026-09-06 16:13:20,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    197. 

  197. 2026-09-06 16:13:20,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    198. 

  198. 2026-09-06 16:13:20,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    199. 

  199. 2026-09-06 16:13:20,188 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    200. 

  200. 2026-09-06 16:13:20,188 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_5.gcode, subtask: Labrax_19-inch_crossbrace_set(2)
    201.