Trang chủ Khám phá Trợ giúp
Đăng nhập
yunoadmin
/
bambuddy
mirror of https://github.com/maziggy/bambuddy
1
0
Fork 0
Các tập tin Các vấn đề 0 Wiki
Branch: bug-report-assets
Branches Tags
bambuddy
/
logs
/
f2f8b4ffa397421e940d875f462130f7.log

f2f8b4ffa397421e940d875f462130f7.log 28 KB
Permalink Lịch sử Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-08-02 18:05:33,471 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    2. 

  2. 2026-08-02 18:05:34,893 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 108820 bytes
    3. 

  3. 2026-08-02 18:05:34,894 INFO [backend.app.main] [-] [FINISH-PHOTO-MOMENT] captured RTSP frame (108820 bytes)
    4. 

  4. 2026-08-02 18:05:34,908 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 108820 bytes
    5. 

  5. 2026-08-02 18:05:34,908 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 108820 bytes
    6. 

  6. 2026-08-02 18:06:44,120 INFO [backend.app.services.bambu_mqtt] [-] [[SERIAL]] PRINT COMPLETE detected - state: FINISH, status: completed, file: /data/Metadata/plate_1.gcode, subtask: Body1, was_running: True, timelapse_during_print: False
    7. 

  7. 2026-08-02 18:06:44,121 INFO [backend.app.main] [-] [CALLBACK] on_print_complete started for printer 1
    8. 

  8. 2026-08-02 18:06:44,121 INFO [backend.app.main] [-] [TIMING] WebSocket send_print_complete: 0.000s elapsed
    9. 

  9. 2026-08-02 18:06:44,121 INFO [backend.app.main] [-] Print complete - filename: /data/Metadata/plate_1.gcode, subtask: Body1, status: completed
    10. 

  10. 2026-08-02 18:06:44,121 INFO [backend.app.main] [-] Looking for archive in _active_prints, keys to try: [(1, 'Body1.3mf'), (1, 'Body1.gcode.3mf'), (1, 'Body1'), (1, 'plate_1.gcode.3mf'), (1, 'plate_1.3mf')]...
    11. 

  11. 2026-08-02 18:06:44,121 INFO [backend.app.main] [-] Current _active_prints: [(1, 'Body1.gcode.3mf'), (1, '/data/Metadata/plate_1.gcode'), (1, 'Body1.3mf')]
    12. 

  12. 2026-08-02 18:06:44,121 INFO [backend.app.main] [-] Found archive 12 with key (1, 'Body1.3mf')
    13. 

  13. 2026-08-02 18:06:44,729 INFO [backend.app.services.bambu_ftp] [-] FTP connected successfully to [IP] (model=X1C, prot_c=False)
    14. 

  14. 2026-08-02 18:06:45,002 INFO [backend.app.services.bambu_ftp] [-] FTP connected successfully to [IP] (model=X1C, prot_c=False)
    15. 

  15. 2026-08-02 18:06:45,014 INFO [backend.app.main] [-] [TIMING] SD card cleanup: 0.893s elapsed
    16. 

  16. 2026-08-02 18:06:45,015 INFO [backend.app.main] [-] [TIMING] Queue item update: 0.894s elapsed
    17. 

  17. 2026-08-02 18:06:45,018 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] on_print_complete: printer=1, archive=12, session=yes, ams_mapping=[3, -1, -1, -1, -1]
    18. 

  18. 2026-08-02 18:06:45,018 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] PRINT COMPLETE printer 1: mapping=None, tray_now=255, last_loaded_tray=3
    19. 

  19. 2026-08-02 18:06:45,019 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] 3MF: archive 12, plate_id=None, filament_usage=[{'slot_id': 1, 'used_g': 3.25, 'type': 'PETG', 'color': '#FFFFFF'}]
    20. 

  20. 2026-08-02 18:06:45,019 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] 3MF: slot_to_tray=[3, -1, -1, -1, -1] (source: print_cmd)
    21. 

  21. 2026-08-02 18:06:45,019 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] 3MF: slot_id=1 -> global_tray=3 -> AMS0-T3 (used_g=3.2, tray_now_override=None)
    22. 

  22. 2026-08-02 18:06:45,020 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] 3MF: no spool assignment at printer 1 AMS0-T3
    23. 

  23. 2026-08-02 18:06:45,020 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] AMS0-T0: not in print mapping/tray_change_log — skipping fallback for printer 1
    24. 

  24. 2026-08-02 18:06:45,020 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] AMS0-T1: not in print mapping/tray_change_log — skipping fallback for printer 1
    25. 

  25. 2026-08-02 18:06:45,020 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] AMS0-T2: not in print mapping/tray_change_log — skipping fallback for printer 1
    26. 

  26. 2026-08-02 18:06:45,020 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] VT254: not in print mapping/tray_change_log — skipping fallback for printer 1
    27. 

  27. 2026-08-02 18:06:45,021 INFO [backend.app.services.spoolman_tracking] [-] [SPOOLMAN] No tracking data for print (printer=1, archive=12)
    28. 

  28. 2026-08-02 18:06:45,021 INFO [backend.app.main] [-] [TIMING] Spoolman usage report: 0.900s elapsed
    29. 

  29. 2026-08-02 18:06:45,021 INFO [backend.app.main] [-] [TIMING] Filament usage tracking: 0.900s elapsed
    30. 

  30. 2026-08-02 18:06:45,021 INFO [backend.app.main] [-] [TIMING] Archive lookup: 0.900s elapsed
    31. 

  31. 2026-08-02 18:06:45,021 INFO [backend.app.main] [-] [ARCHIVE] Updating archive 12 status...
    32. 

  32. 2026-08-02 18:06:45,023 INFO [backend.app.main] [-] [ARCHIVE] Archive 12 status updated to completed, failure_reason=None
    33. 

  33. 2026-08-02 18:06:45,023 INFO [backend.app.main] [-] [ARCHIVE] WebSocket notification sent for archive 12
    34. 

  34. 2026-08-02 18:06:45,023 INFO [backend.app.main] [-] [TIMING] Archive status update: 0.903s elapsed
    35. 

  35. 2026-08-02 18:06:45,025 INFO [backend.app.main] [-] [PRINT_LOG] Log entry written for archive 12
    36. 

  36. 2026-08-02 18:06:45,025 INFO [backend.app.main] [-] [TIMING] Print log entry: 0.904s elapsed
    37. 

  37. 2026-08-02 18:06:45,025 INFO [backend.app.main] [-] [TIMING] Background tasks scheduled (energy, photo): 0.904s elapsed
    38. 

  38. 2026-08-02 18:06:45,025 INFO [backend.app.main] [-] [TIMING] All background tasks scheduled: 0.904s elapsed
    39. 

  39. 2026-08-02 18:06:45,025 INFO [backend.app.main] [-] [CALLBACK] on_print_complete finished for printer 1, archive 12
    40. 

  40. 2026-08-02 18:06:45,025 INFO [backend.app.main] [-] [ENERGY-BG] Starting energy calculation for archive 12
    41. 

  41. 2026-08-02 18:06:45,026 INFO [backend.app.main] [-] [PHOTO-BG] Starting finish photo capture for archive 12
    42. 

  42. 2026-08-02 18:06:45,026 INFO [backend.app.main] [-] [AUTO-OFF-BG] Starting smart plug automation for printer 1
    43. 

  43. 2026-08-02 18:06:45,026 INFO [backend.app.main] [-] [MAINT-BG] Starting maintenance check for printer 1
    44. 

  44. 2026-08-02 18:06:45,027 INFO [backend.app.main] [-] [LAYER-TL] Stitching layer timelapse for printer 1
    45. 

  45. 2026-08-02 18:06:45,028 INFO [backend.app.main] [-] [AUTO-OFF-BG] Completed
    46. 

  46. 2026-08-02 18:06:45,029 INFO [backend.app.main] [-] [ENERGY-BG] No start kWh recorded for archive 12
    47. 

  47. 2026-08-02 18:06:45,031 INFO [backend.app.main] [-] [PHOTO-BG] Saved stage-22 pre-captured frame: finish_20260802_180645_4c6ef993.jpg (108820 bytes)
    48. 

  48. 2026-08-02 18:06:45,034 INFO [backend.app.main] [-] [PHOTO-BG] Saved: finish_20260802_180645_4c6ef993.jpg
    49. 

  49. 2026-08-02 18:06:45,034 INFO [backend.app.main] [-] [PHOTO-NOTIFY] Photo task returned: finish_20260802_180645_4c6ef993.jpg
    50. 

  50. 2026-08-02 18:06:45,034 INFO [backend.app.main] [-] [NOTIFY-BG] Starting notifications for printer 1, photo=finish_20260802_180645_4c6ef993.jpg
    51. 

  51. 2026-08-02 18:06:45,037 INFO [backend.app.main] [-] [NOTIFY-BG] Loaded finish photo bytes: 108820 bytes
    52. 

  52. 2026-08-02 18:06:45,037 INFO [backend.app.services.notification_service] [-] on_print_complete called for printer 1 ([PRINTER]), status=completed
    53. 

  53. 2026-08-02 18:06:45,038 INFO [backend.app.services.notification_service] [-] No notification providers configured for on_print_complete event on printer 1
    54. 

  54. 2026-08-02 18:06:45,038 INFO [backend.app.main] [-] [NOTIFY-BG] Completed
    55. 

  55. 2026-08-02 18:06:45,039 INFO [backend.app.main] [-] [MAINT-BG] Completed (no items need attention)
    56. 

  56. 2026-08-02 18:07:28,363 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    57. 

  57. 2026-08-02 18:12:28,367 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    58. 

  58. 2026-08-02 18:17:28,373 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    59. 

  59. 2026-08-02 18:22:28,378 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    60. 

  60. 2026-08-02 18:27:28,382 INFO [backend.app.main] [-] Sending temperature alarm for [PRINTER] AMS-A: 41.4°C > 35.0°C
    61. 

  61. 2026-08-02 18:27:28,383 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    62. 

  62. 2026-08-02 18:32:28,388 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    63. 

  63. 2026-08-02 18:37:28,392 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    64. 

  64. 2026-08-02 18:42:28,397 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    65. 

  65. 2026-08-02 18:47:28,402 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    66. 

  66. 2026-08-02 18:52:28,406 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    67. 

  67. 2026-08-02 18:57:28,414 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    68. 

  68. 2026-08-02 19:02:28,418 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    69. 

  69. 2026-08-02 19:07:28,422 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    70. 

  70. 2026-08-02 19:12:28,426 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    71. 

  71. 2026-08-02 19:15:49,266 INFO [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Captured ams_mapping from print command: [3, -1, -1, -1, -1]
    72. 

  72. 2026-08-02 19:15:49,598 INFO [backend.app.services.bambu_mqtt] [-] [[SERIAL]] PRINT START detected - file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1, is_new: True, is_file_change: False
    73. 

  73. 2026-08-02 19:15:49,599 INFO [backend.app.main] [-] [CALLBACK] on_print_start called for printer 1, data keys: ['filename', 'subtask_name', 'remaining_time', 'raw_data', 'ams_mapping']
    74. 

  74. 2026-08-02 19:15:49,603 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] PRINT START printer 1: mapping=None, tray_now=255, last_loaded_tray=3
    75. 

  75. 2026-08-02 19:15:49,603 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] PRINT START printer 1 AMS 0: T0(type=PETG, color=161616FF, now=?, tar=?), T1(type=PLA, color=898989FF, now=?, tar=?), T2(type=PA, color=161616FF, now=?, tar=?), T3(type=PETG, color=FFFFFFFF, now=?, tar=?)
    76. 

  76. 2026-08-02 19:15:49,604 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] Captured start remain% for printer 1 (5 trays): {'0-0': 0, '0-1': 0, '0-2': 0, '0-3': 0, '255-0': 0}
    77. 

  77. 2026-08-02 19:15:49,605 INFO [backend.app.main] [-] [PLATE CHECK] printer_id=1, plate_detection_enabled=False
    78. 

  78. 2026-08-02 19:15:49,605 INFO [backend.app.main] [-] [CALLBACK] Print start detected - filename: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    79. 

  79. 2026-08-02 19:15:49,606 INFO [backend.app.main] [-] Trying filenames: ['haak zwembad v1.gcode.3mf', 'haak zwembad v1.3mf', 'plate_1.gcode.3mf', 'plate_1.3mf', 'haak_zwembad_v1.gcode.3mf', 'haak_zwembad_v1.3mf']
    80. 

  80. 2026-08-02 19:15:50,009 INFO [backend.app.services.bambu_ftp] [-] FTP connected successfully to [IP] (model=X1C, prot_c=False)
    81. 

  81. 2026-08-02 19:15:50,705 INFO [backend.app.services.bambu_ftp] [-] Successfully downloaded /haak zwembad v1.gcode.3mf to /app/data/archive/temp/haak zwembad v1.gcode.3mf (101069 bytes)
    82. 

  82. 2026-08-02 19:15:50,705 INFO [backend.app.services.bambu_ftp] [-] FTP mode cached for [IP]: prot_p
    83. 

  83. 2026-08-02 19:15:50,712 INFO [backend.app.main] [-] Downloaded: /haak zwembad v1.gcode.3mf
    84. 

  84. 2026-08-02 19:15:50,759 INFO [backend.app.main] [-] Created archive 13 for haak zwembad v1.gcode.3mf
    85. 

  85. 2026-08-02 19:15:50,760 INFO [backend.app.main] [-] [ENERGY] No smart plug for printer 1 (archive 13)
    86. 

  86. 2026-08-02 19:15:50,761 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 1
    87. 

  87. 2026-08-02 19:15:50,762 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    88. 

  88. 2026-08-02 19:15:52,339 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 95757 bytes
    89. 

  89. 2026-08-02 19:15:52,339 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 95757 bytes
    90. 

  90. 2026-08-02 19:15:52,339 INFO [backend.app.services.notification_service] [-] on_print_start called for printer 1 ([PRINTER])
    91. 

  91. 2026-08-02 19:15:52,340 INFO [backend.app.services.notification_service] [-] No notification providers configured for print_start event on printer 1
    92. 

  92. 2026-08-02 19:15:52,341 INFO [backend.app.main] [-] Loaded 1 printable objects for printer 1
    93. 

  93. 2026-08-02 19:15:52,539 INFO [backend.app.services.bambu_ftp] [-] FTP connected successfully to [IP] (model=X1C, prot_c=False)
    94. 

  94. 2026-08-02 19:15:52,649 INFO [backend.app.main] [-] [TIMELAPSE] Baseline at print start: 129 video files for printer 1
    95. 

  95. 2026-08-02 19:17:28,432 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    96. 

  96. 2026-08-02 19:17:33,597 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 1
    97. 

  97. 2026-08-02 19:17:33,597 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    98. 

  98. 2026-08-02 19:17:36,122 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 121855 bytes
    99. 

  99. 2026-08-02 19:17:36,122 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 121855 bytes
    100. 

  100. 2026-08-02 19:21:09,311 INFO [uvicorn.access] [-] [IP]:8243 - "POST /api/v1/printers/camera/stream-token HTTP/1.1" 200
    101. 

  101. 2026-08-02 19:21:09,373 INFO [uvicorn.access] [-] [IP]:54541 - "POST /api/v1/auth/ws-token HTTP/1.1" 200
    102. 

  102. 2026-08-02 19:21:09,414 INFO [backend.app.api.routes.websocket] [-] WebSocket client connecting (principal=<anonymous>)
    103. 

  103. 2026-08-02 19:21:09,414 INFO [backend.app.api.routes.websocket] [-] WebSocket client connected
    104. 

  104. 2026-08-02 19:21:09,414 INFO [backend.app.api.routes.websocket] [-] Sent initial status for 1 printers
    105. 

  105. 2026-08-02 19:21:09,449 INFO [backend.app.api.routes.cloud] [71f50128] get_filament_info called with 3 IDs: ['GFG99', 'GFL99', 'GFN99']
    106. 

  106. 2026-08-02 19:21:09,454 INFO [uvicorn.access] [-] [IP]:61926 - "POST /api/v1/cloud/filament-info HTTP/1.1" 200
    107. 

  107. 2026-08-02 19:21:09,455 INFO [backend.app.api.routes.printers] [ff6bd3ff] Cover: resolved plate 1 before download (subtask=haak zwembad v1)
    108. 

  108. 2026-08-02 19:21:09,455 INFO [backend.app.api.routes.printers] [ff6bd3ff] Cover using cached 3MF from /app/data/archive/temp/haak zwembad v1.gcode.3mf (avoided duplicate FTP)
    109. 

  109. 2026-08-02 19:21:09,455 INFO [backend.app.api.routes.printers] [ff6bd3ff] Downloaded file size: 101069 bytes
    110. 

  110. 2026-08-02 19:22:28,437 INFO [backend.app.main] [-] Recorded 1 AMS sensor history entries
    111. 

  111. 2026-08-02 19:23:16,134 INFO [backend.app.services.mqtt_relay] [46622b8c] MQTT relay disabled
    112. 

  112. 2026-08-02 19:23:16,137 INFO [uvicorn.access] [-] [IP]:10130 - "PUT /api/v1/settings/ HTTP/1.1" 200
    113. 

  113. 2026-08-02 19:23:54,111 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 1
    114. 

  114. 2026-08-02 19:23:54,112 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    115. 

  115. 2026-08-02 19:23:55,882 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 133222 bytes
    116. 

  116. 2026-08-02 19:23:55,882 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 133222 bytes
    117. 

  117. 2026-08-02 19:24:35,512 INFO [backend.app.api.routes.support] [05483a68] Log level changed to DEBUG
    118. 

  118. 2026-08-02 19:24:35,512 INFO [backend.app.api.routes.bug_report] [05483a68] Bug report: enabled debug logging
    119. 

  119. 2026-08-02 19:24:35,512 DEBUG [backend.app.services.bambu_mqtt] [05483a68] [[SERIAL]] Requesting status update (pushall)
    120. 

  120. 2026-08-02 19:24:35,513 INFO [uvicorn.access] [-] [IP]:7745 - "POST /api/v1/bug-report/start-logging HTTP/1.1" 200
    121. 

  121. 2026-08-02 19:24:35,766 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    122. 

  122. 2026-08-02 19:24:35,766 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    123. 

  123. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: haak zwembad v1
    124. 

  124. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'version': 15977}
    125. 

  125. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 3
    126. 

  126. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    127. 

  127. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    128. 

  128. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    129. 

  129. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    130. 

  130. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    131. 

  131. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=40.0, heating=False, respect_local=False
    132. 

  132. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 40.0, target: 0.0, heating: False
    133. 

  133. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    134. 

  134. 2026-08-02 19:24:35,767 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    135. 

  135. 2026-08-02 19:24:35,768 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -38dBm
    136. 

  136. 2026-08-02 19:24:35,768 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    137. 

  137. 2026-08-02 19:24:35,768 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    138. 

  138. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    139. 

  139. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    140. 

  140. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: haak zwembad v1
    141. 

  141. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    142. 

  142. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    143. 

  143. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    144. 

  144. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    145. 

  145. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    146. 

  146. 2026-08-02 19:24:36,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    147. 

  147. 2026-08-02 19:24:37,814 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    148. 

  148. 2026-08-02 19:24:37,814 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    149. 

  149. 2026-08-02 19:24:37,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: haak zwembad v1
    150. 

  150. 2026-08-02 19:24:37,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    151. 

  151. 2026-08-02 19:24:37,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    152. 

  152. 2026-08-02 19:24:37,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    153. 

  153. 2026-08-02 19:24:37,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    154. 

  154. 2026-08-02 19:24:37,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    155. 

  155. 2026-08-02 19:24:37,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    156. 

  156. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    157. 

  157. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    158. 

  158. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: haak zwembad v1
    159. 

  159. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    160. 

  160. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    161. 

  161. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    162. 

  162. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    163. 

  163. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    164. 

  164. 2026-08-02 19:24:38,835 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    165. 

  165. 2026-08-02 19:24:39,913 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    166. 

  166. 2026-08-02 19:24:39,913 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    167. 

  167. 2026-08-02 19:24:39,913 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: haak zwembad v1
    168. 

  168. 2026-08-02 19:24:39,913 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    169. 

  169. 2026-08-02 19:24:39,913 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    170. 

  170. 2026-08-02 19:24:39,913 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    171. 

  171. 2026-08-02 19:24:39,913 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    172. 

  172. 2026-08-02 19:24:39,913 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    173. 

  173. 2026-08-02 19:24:39,914 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    174. 

  174. 2026-08-02 19:24:40,851 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    175. 

  175. 2026-08-02 19:24:40,852 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    176. 

  176. 2026-08-02 19:24:40,852 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: haak zwembad v1
    177. 

  177. 2026-08-02 19:24:40,852 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    178. 

  178. 2026-08-02 19:24:40,852 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    179. 

  179. 2026-08-02 19:24:40,852 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    180. 

  180. 2026-08-02 19:24:40,852 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    181. 

  181. 2026-08-02 19:24:40,852 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    182. 

  182. 2026-08-02 19:24:40,853 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    183. 

  183. 2026-08-02 19:24:41,884 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    184. 

  184. 2026-08-02 19:24:41,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    185. 

  185. 2026-08-02 19:24:41,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: haak zwembad v1
    186. 

  186. 2026-08-02 19:24:41,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    187. 

  187. 2026-08-02 19:24:41,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    188. 

  188. 2026-08-02 19:24:41,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    189. 

  189. 2026-08-02 19:24:41,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    190. 

  190. 2026-08-02 19:24:41,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    191. 

  191. 2026-08-02 19:24:41,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    192. 

  192. 2026-08-02 19:24:42,891 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    193. 

  193. 2026-08-02 19:24:42,891 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    194. 

  194. 2026-08-02 19:24:42,891 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: haak zwembad v1
    195. 

  195. 2026-08-02 19:24:42,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    196. 

  196. 2026-08-02 19:24:42,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    197. 

  197. 2026-08-02 19:24:42,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    198. 

  198. 2026-08-02 19:24:42,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    199. 

  199. 2026-08-02 19:24:42,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    200. 

  200. 2026-08-02 19:24:42,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: haak zwembad v1
    201.