Главная Обзор Помощь
Вход
yunoadmin
/
bambuddy
зеркало из https://github.com/maziggy/bambuddy
1
0
Ответвить 0
Файлы Задачи 0 Вики
Ветка: bug-report-assets
Ветки Метки
bambuddy
/
logs
/
b5f6b441513f4f8f8562e33bbef0d62b.log

b5f6b441513f4f8f8562e33bbef0d62b.log 37 KB
Постоянная ссылка История Исходник

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-10-19 01:20:48,325 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    2. 

  2. 2026-10-19 01:20:48,325 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] info.temp direct: 23°C (heater OFF)
    3. 

  3. 2026-10-19 01:20:48,325 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ctc_info keys: ['temp']
    4. 

  4. 2026-10-19 01:20:48,326 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=23.0, heating=False, respect_local=False
    5. 

  5. 2026-10-19 01:20:48,327 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 23.0, target: 0.0, heating: False
    6. 

  6. 2026-10-19 01:20:48,327 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    7. 

  7. 2026-10-19 01:20:48,327 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 349335936, 'tl_external_total_kb': 482540672, 'tl_internal_free_kb': 960180, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    8. 

  8. 2026-10-19 01:20:48,328 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -50dBm
    9. 

  9. 2026-10-19 01:20:48,328 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    10. 

  10. 2026-10-19 01:20:48,329 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    11. 

  11. 2026-10-19 01:20:48,329 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    12. 

  12. 2026-10-19 01:20:49,623 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    13. 

  13. 2026-10-19 01:20:49,623 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    14. 

  14. 2026-10-19 01:20:49,623 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    15. 

  15. 2026-10-19 01:20:49,623 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    16. 

  16. 2026-10-19 01:20:49,624 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    17. 

  17. 2026-10-19 01:20:49,625 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    18. 

  18. 2026-10-19 01:20:49,625 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    19. 

  19. 2026-10-19 01:20:49,626 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    20. 

  20. 2026-10-19 01:20:49,628 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    21. 

  21. 2026-10-19 01:20:49,629 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    22. 

  22. 2026-10-19 01:20:49,960 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    23. 

  23. 2026-10-19 01:20:49,960 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -49dBm
    24. 

  24. 2026-10-19 01:20:50,323 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP NOTIFY for [PRINTER] (Location=[IP], USN=[SERIAL], bind=[IP])
    25. 

  25. 2026-10-19 01:20:50,324 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP NOTIFY for [PRINTER] (Location=[IP], USN=22E00A391800001, bind=[IP])
    26. 

  26. 2026-10-19 01:20:50,678 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    27. 

  27. 2026-10-19 01:20:50,678 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    28. 

  28. 2026-10-19 01:20:50,679 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    29. 

  29. 2026-10-19 01:20:50,679 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    30. 

  30. 2026-10-19 01:20:50,679 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': '100ff', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': '100ff', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '100ff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 60170}
    31. 

  31. 2026-10-19 01:20:50,680 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    32. 

  32. 2026-10-19 01:20:50,680 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    33. 

  33. 2026-10-19 01:20:50,682 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    34. 

  34. 2026-10-19 01:20:50,682 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    35. 

  35. 2026-10-19 01:20:50,683 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    36. 

  36. 2026-10-19 01:20:50,683 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    37. 

  37. 2026-10-19 01:20:51,730 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    38. 

  38. 2026-10-19 01:20:51,731 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    39. 

  39. 2026-10-19 01:20:51,731 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    40. 

  40. 2026-10-19 01:20:51,731 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    41. 

  41. 2026-10-19 01:20:51,732 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': '100ff', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': '100ff', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '100ff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 60171}
    42. 

  42. 2026-10-19 01:20:51,733 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    43. 

  43. 2026-10-19 01:20:51,733 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    44. 

  44. 2026-10-19 01:20:51,734 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    45. 

  45. 2026-10-19 01:20:51,734 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    46. 

  46. 2026-10-19 01:20:51,735 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    47. 

  47. 2026-10-19 01:20:51,735 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    48. 

  48. 2026-10-19 01:20:52,080 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    49. 

  49. 2026-10-19 01:20:52,081 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    50. 

  50. 2026-10-19 01:20:52,784 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    51. 

  51. 2026-10-19 01:20:52,784 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    52. 

  52. 2026-10-19 01:20:52,785 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    53. 

  53. 2026-10-19 01:20:52,785 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    54. 

  54. 2026-10-19 01:20:52,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    55. 

  55. 2026-10-19 01:20:52,786 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    56. 

  56. 2026-10-19 01:20:52,787 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    57. 

  57. 2026-10-19 01:20:52,787 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    58. 

  58. 2026-10-19 01:20:52,788 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    59. 

  59. 2026-10-19 01:20:52,789 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    60. 

  60. 2026-10-19 01:20:53,828 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    61. 

  61. 2026-10-19 01:20:53,828 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    62. 

  62. 2026-10-19 01:20:53,829 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    63. 

  63. 2026-10-19 01:20:53,829 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    64. 

  64. 2026-10-19 01:20:53,830 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': '100ff', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': '100ff', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '100ff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 60172}
    65. 

  65. 2026-10-19 01:20:53,830 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    66. 

  66. 2026-10-19 01:20:53,831 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    67. 

  67. 2026-10-19 01:20:53,832 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    68. 

  68. 2026-10-19 01:20:53,833 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    69. 

  69. 2026-10-19 01:20:53,833 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    70. 

  70. 2026-10-19 01:20:53,834 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    71. 

  71. 2026-10-19 01:20:54,070 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    72. 

  72. 2026-10-19 01:20:54,071 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -49dBm
    73. 

  73. 2026-10-19 01:20:55,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    74. 

  74. 2026-10-19 01:20:55,112 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    75. 

  75. 2026-10-19 01:20:55,112 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    76. 

  76. 2026-10-19 01:20:55,113 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    77. 

  77. 2026-10-19 01:20:55,114 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    78. 

  78. 2026-10-19 01:20:55,116 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    79. 

  79. 2026-10-19 01:20:55,117 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    80. 

  80. 2026-10-19 01:20:55,125 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    81. 

  81. 2026-10-19 01:20:55,126 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    82. 

  82. 2026-10-19 01:20:55,127 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    83. 

  83. 2026-10-19 01:20:56,194 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    84. 

  84. 2026-10-19 01:20:56,194 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    85. 

  85. 2026-10-19 01:20:56,195 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    86. 

  86. 2026-10-19 01:20:56,198 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    87. 

  87. 2026-10-19 01:20:56,199 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    88. 

  88. 2026-10-19 01:20:56,199 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    89. 

  89. 2026-10-19 01:20:56,201 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    90. 

  90. 2026-10-19 01:20:56,202 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    91. 

  91. 2026-10-19 01:20:56,203 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    92. 

  92. 2026-10-19 01:20:56,206 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    93. 

  93. 2026-10-19 01:20:57,421 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    94. 

  94. 2026-10-19 01:20:57,421 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    95. 

  95. 2026-10-19 01:20:57,422 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    96. 

  96. 2026-10-19 01:20:57,422 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    97. 

  97. 2026-10-19 01:20:57,423 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    98. 

  98. 2026-10-19 01:20:57,424 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    99. 

  99. 2026-10-19 01:20:57,425 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    100. 

  100. 2026-10-19 01:20:57,426 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    101. 

  101. 2026-10-19 01:20:57,427 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    102. 

  102. 2026-10-19 01:20:57,428 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    103. 

  103. 2026-10-19 01:20:58,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    104. 

  104. 2026-10-19 01:20:58,464 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    105. 

  105. 2026-10-19 01:20:58,464 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    106. 

  106. 2026-10-19 01:20:58,465 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    107. 

  107. 2026-10-19 01:20:58,466 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    108. 

  108. 2026-10-19 01:20:58,467 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    109. 

  109. 2026-10-19 01:20:58,468 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    110. 

  110. 2026-10-19 01:20:58,469 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    111. 

  111. 2026-10-19 01:20:58,470 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    112. 

  112. 2026-10-19 01:20:58,471 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    113. 

  113. 2026-10-19 01:20:58,472 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    114. 

  114. 2026-10-19 01:20:59,536 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    115. 

  115. 2026-10-19 01:20:59,537 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    116. 

  116. 2026-10-19 01:20:59,537 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    117. 

  117. 2026-10-19 01:20:59,537 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    118. 

  118. 2026-10-19 01:20:59,538 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    119. 

  119. 2026-10-19 01:20:59,538 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    120. 

  120. 2026-10-19 01:20:59,539 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    121. 

  121. 2026-10-19 01:20:59,540 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    122. 

  122. 2026-10-19 01:20:59,540 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    123. 

  123. 2026-10-19 01:20:59,541 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    124. 

  124. 2026-10-19 01:20:59,580 INFO [backend.app.services.print_scheduler] [-] Queue check: found 5 pending items: [(82, 2, None, 91), (83, 2, None, 91), (86, 2, None, 91), (87, 2, None, 91), (90, 1, None, 94)]
    125. 

  125. 2026-10-19 01:20:59,591 DEBUG [backend.app.services.print_scheduler] [-] Printer 2: not idle — awaiting plate-clear acknowledgment (state=FINISH)
    126. 

  126. 2026-10-19 01:20:59,591 DEBUG [backend.app.services.print_scheduler] [-] Printer 1: not idle — awaiting plate-clear acknowledgment (state=FINISH)
    127. 

  127. 2026-10-19 01:20:59,592 INFO [backend.app.services.print_scheduler] [-] Queue: printer 1 unavailable — not idle (now: connected=True, state=FINISH, awaiting_plate_clear=True)
    128. 

  128. 2026-10-19 01:20:59,592 INFO [backend.app.services.print_scheduler] [-] Queue: printer 2 unavailable — not idle (now: connected=True, state=FINISH, awaiting_plate_clear=True)
    129. 

  129. 2026-10-19 01:20:59,628 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 1 skipped — model [PRINTER] does not support drying
    130. 

  130. 2026-10-19 01:20:59,628 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 2 — checking 3 AMS units
    131. 

  131. 2026-10-19 01:20:59,629 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 2 AMS 0 — drying (720m left, humidity 24%), letting it run
    132. 

  132. 2026-10-19 01:20:59,629 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 2 AMS 1 — drying (720m left, humidity 28%), letting it run
    133. 

  133. 2026-10-19 01:20:59,629 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 2 AMS 128 skipped — humidity 26 <= threshold 30
    134. 

  134. 2026-10-19 01:21:00,191 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    135. 

  135. 2026-10-19 01:21:00,191 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    136. 

  136. 2026-10-19 01:21:00,596 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    137. 

  137. 2026-10-19 01:21:00,602 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    138. 

  138. 2026-10-19 01:21:00,608 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    139. 

  139. 2026-10-19 01:21:00,610 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    140. 

  140. 2026-10-19 01:21:00,616 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': '100ff', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': '100ff', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '100ff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 60173}
    141. 

  141. 2026-10-19 01:21:00,620 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    142. 

  142. 2026-10-19 01:21:00,622 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    143. 

  143. 2026-10-19 01:21:00,625 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    144. 

  144. 2026-10-19 01:21:00,628 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    145. 

  145. 2026-10-19 01:21:00,630 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    146. 

  146. 2026-10-19 01:21:00,631 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    147. 

  147. 2026-10-19 01:21:01,659 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    148. 

  148. 2026-10-19 01:21:01,659 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    149. 

  149. 2026-10-19 01:21:01,661 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    150. 

  150. 2026-10-19 01:21:01,662 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    151. 

  151. 2026-10-19 01:21:01,665 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': '100ff', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': '100ff', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '100ff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 60174}
    152. 

  152. 2026-10-19 01:21:01,669 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    153. 

  153. 2026-10-19 01:21:01,670 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    154. 

  154. 2026-10-19 01:21:01,676 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    155. 

  155. 2026-10-19 01:21:01,678 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    156. 

  156. 2026-10-19 01:21:01,680 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    157. 

  157. 2026-10-19 01:21:01,680 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    158. 

  158. 2026-10-19 01:21:02,263 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    159. 

  159. 2026-10-19 01:21:02,265 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -49dBm
    160. 

  160. 2026-10-19 01:21:02,933 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    161. 

  161. 2026-10-19 01:21:02,934 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    162. 

  162. 2026-10-19 01:21:02,935 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    163. 

  163. 2026-10-19 01:21:02,935 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    164. 

  164. 2026-10-19 01:21:02,936 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '13', 'ams_exist_bits_raw': '13', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': '100ff', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': '100ff', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '100ff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 60176}
    165. 

  165. 2026-10-19 01:21:02,937 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    166. 

  166. 2026-10-19 01:21:02,938 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    167. 

  167. 2026-10-19 01:21:02,943 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    168. 

  168. 2026-10-19 01:21:02,944 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    169. 

  169. 2026-10-19 01:21:02,945 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    170. 

  170. 2026-10-19 01:21:02,948 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    171. 

  171. 2026-10-19 01:21:03,978 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    172. 

  172. 2026-10-19 01:21:03,978 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    173. 

  173. 2026-10-19 01:21:03,979 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    174. 

  174. 2026-10-19 01:21:03,979 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    175. 

  175. 2026-10-19 01:21:03,980 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    176. 

  176. 2026-10-19 01:21:03,981 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    177. 

  177. 2026-10-19 01:21:03,982 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    178. 

  178. 2026-10-19 01:21:03,992 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    179. 

  179. 2026-10-19 01:21:03,993 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    180. 

  180. 2026-10-19 01:21:03,993 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    181. 

  181. 2026-10-19 01:21:05,252 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    182. 

  182. 2026-10-19 01:21:05,252 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    183. 

  183. 2026-10-19 01:21:05,253 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    184. 

  184. 2026-10-19 01:21:05,254 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    185. 

  185. 2026-10-19 01:21:05,255 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    186. 

  186. 2026-10-19 01:21:05,256 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    187. 

  187. 2026-10-19 01:21:05,257 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    188. 

  188. 2026-10-19 01:21:05,258 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    189. 

  189. 2026-10-19 01:21:05,259 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    190. 

  190. 2026-10-19 01:21:05,260 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    191. 

  191. 2026-10-19 01:21:06,295 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    192. 

  192. 2026-10-19 01:21:06,295 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    193. 

  193. 2026-10-19 01:21:06,295 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    194. 

  194. 2026-10-19 01:21:06,296 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 11.猫头鹰100mm
    195. 

  195. 2026-10-19 01:21:06,297 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '128': 0}
    196. 

  196. 2026-10-19 01:21:06,298 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    197. 

  197. 2026-10-19 01:21:06,299 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 84082688, 'code': 196647, 'ts_boot': 746048059, 'ts_unix': '20261012005923'}]
    198. 

  198. 2026-10-19 01:21:06,300 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    199. 

  199. 2026-10-19 01:21:06,301 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 2]
    200. 

  200. 2026-10-19 01:21:06,301 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 11.猫头鹰100mm
    201.