首頁 探索 說明
登入
yunoadmin
/
bambuddy
镜像来自 https://github.com/maziggy/bambuddy
1
0
複刻 0
檔案 問題管理 0 Wiki
分支: bug-report-assets
分支列表 標籤列表
bambuddy
/
logs
/
9c23b54cb03c411db938593ce70b4642.log

9c23b54cb03c411db938593ce70b4642.log 34 KB
永久連結 文件歷史 原始文件

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-06-17 10:38:18,001 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    2. 

  2. 2026-06-17 10:38:18,001 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 201326848, 'code': 131099}, {'attr': 83886848, 'code': 65546}]
    3. 

  3. 2026-06-17 10:38:18,001 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    4. 

  4. 2026-06-17 10:38:18,001 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -73dBm
    5. 

  5. 2026-06-17 10:38:18,001 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    6. 

  6. 2026-06-17 10:38:18,001 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [1]
    7. 

  7. 2026-06-17 10:38:18,001 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Handyhalter_BR_3_Stueck_LaC
    8. 

  8. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    9. 

  9. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    10. 

  10. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    11. 

  11. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '4', 'tray_is_bbl_bits': '4', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '4', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 58989}
    12. 

  12. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    13. 

  13. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    14. 

  14. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    15. 

  15. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    16. 

  16. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    17. 

  17. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    18. 

  18. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    19. 

  19. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 27°C (heater OFF)
    20. 

  20. 2026-06-17 10:38:18,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    21. 

  21. 2026-06-17 10:38:18,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=27.0, heating=False, respect_local=False
    22. 

  22. 2026-06-17 10:38:18,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 27.0, target: 0.0, heating: False
    23. 

  23. 2026-06-17 10:38:18,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    24. 

  24. 2026-06-17 10:38:18,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    25. 

  25. 2026-06-17 10:38:18,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    26. 

  26. 2026-06-17 10:38:18,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    27. 

  27. 2026-06-17 10:38:18,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    28. 

  28. 2026-06-17 10:38:18,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    29. 

  29. 2026-06-17 10:38:19,389 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    30. 

  30. 2026-06-17 10:38:19,389 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    31. 

  31. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    32. 

  32. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Handyhalter_BR_3_Stueck_LaC
    33. 

  33. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'c', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'c', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'c', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 34189}
    34. 

  34. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    35. 

  35. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    36. 

  36. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    37. 

  37. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    38. 

  38. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    39. 

  39. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    40. 

  40. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    41. 

  41. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    42. 

  42. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    43. 

  43. 2026-06-17 10:38:19,390 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    44. 

  44. 2026-06-17 10:38:19,391 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    45. 

  45. 2026-06-17 10:38:19,391 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 201326848, 'code': 131099}, {'attr': 83886848, 'code': 65546}]
    46. 

  46. 2026-06-17 10:38:19,391 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    47. 

  47. 2026-06-17 10:38:19,391 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -73dBm
    48. 

  48. 2026-06-17 10:38:19,391 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    49. 

  49. 2026-06-17 10:38:19,391 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [1]
    50. 

  50. 2026-06-17 10:38:19,391 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Handyhalter_BR_3_Stueck_LaC
    51. 

  51. 2026-06-17 10:38:19,653 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    52. 

  52. 2026-06-17 10:38:19,653 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    53. 

  53. 2026-06-17 10:38:19,653 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    54. 

  54. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '4', 'tray_is_bbl_bits': '4', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '4', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 58989}
    55. 

  55. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    56. 

  56. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    57. 

  57. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    58. 

  58. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    59. 

  59. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    60. 

  60. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    61. 

  61. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    62. 

  62. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 27°C (heater OFF)
    63. 

  63. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    64. 

  64. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=27.0, heating=False, respect_local=False
    65. 

  65. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 27.0, target: 0.0, heating: False
    66. 

  66. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    67. 

  67. 2026-06-17 10:38:19,654 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    68. 

  68. 2026-06-17 10:38:19,655 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    69. 

  69. 2026-06-17 10:38:19,655 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    70. 

  70. 2026-06-17 10:38:19,655 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    71. 

  71. 2026-06-17 10:38:19,655 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    72. 

  72. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    73. 

  73. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    74. 

  74. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    75. 

  75. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Handyhalter_BR_3_Stueck_LaC
    76. 

  76. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'c', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'c', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'c', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 34189}
    77. 

  77. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    78. 

  78. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    79. 

  79. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    80. 

  80. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    81. 

  81. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    82. 

  82. 2026-06-17 10:38:20,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    83. 

  83. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    84. 

  84. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    85. 

  85. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    86. 

  86. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    87. 

  87. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    88. 

  88. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 201326848, 'code': 131099}, {'attr': 83886848, 'code': 65546}]
    89. 

  89. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    90. 

  90. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -73dBm
    91. 

  91. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    92. 

  92. 2026-06-17 10:38:20,592 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [1]
    93. 

  93. 2026-06-17 10:38:20,593 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Handyhalter_BR_3_Stueck_LaC
    94. 

  94. 2026-06-17 10:38:20,767 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    95. 

  95. 2026-06-17 10:38:20,767 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    96. 

  96. 2026-06-17 10:38:20,768 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    97. 

  97. 2026-06-17 10:38:20,768 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '4', 'tray_is_bbl_bits': '4', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '4', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 58989}
    98. 

  98. 2026-06-17 10:38:20,768 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    99. 

  99. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    100. 

  100. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    101. 

  101. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    102. 

  102. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    103. 

  103. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    104. 

  104. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    105. 

  105. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 27°C (heater OFF)
    106. 

  106. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    107. 

  107. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=27.0, heating=False, respect_local=False
    108. 

  108. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 27.0, target: 0.0, heating: False
    109. 

  109. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    110. 

  110. 2026-06-17 10:38:20,769 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    111. 

  111. 2026-06-17 10:38:20,771 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    112. 

  112. 2026-06-17 10:38:20,771 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    113. 

  113. 2026-06-17 10:38:20,771 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    114. 

  114. 2026-06-17 10:38:20,771 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    115. 

  115. 2026-06-17 10:38:21,846 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    116. 

  116. 2026-06-17 10:38:21,846 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    117. 

  117. 2026-06-17 10:38:21,846 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    118. 

  118. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '4', 'tray_is_bbl_bits': '4', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '4', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 58989}
    119. 

  119. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    120. 

  120. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    121. 

  121. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    122. 

  122. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    123. 

  123. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    124. 

  124. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    125. 

  125. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    126. 

  126. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 27°C (heater OFF)
    127. 

  127. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    128. 

  128. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=27.0, heating=False, respect_local=False
    129. 

  129. 2026-06-17 10:38:21,847 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 27.0, target: 0.0, heating: False
    130. 

  130. 2026-06-17 10:38:21,848 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    131. 

  131. 2026-06-17 10:38:21,848 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    132. 

  132. 2026-06-17 10:38:21,848 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    133. 

  133. 2026-06-17 10:38:21,848 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    134. 

  134. 2026-06-17 10:38:21,848 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    135. 

  135. 2026-06-17 10:38:21,848 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    136. 

  136. 2026-06-17 10:38:22,090 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    137. 

  137. 2026-06-17 10:38:22,090 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    138. 

  138. 2026-06-17 10:38:22,090 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    139. 

  139. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Handyhalter_BR_3_Stueck_LaC
    140. 

  140. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'c', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'c', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'c', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 34189}
    141. 

  141. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    142. 

  142. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    143. 

  143. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    144. 

  144. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    145. 

  145. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    146. 

  146. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    147. 

  147. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    148. 

  148. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    149. 

  149. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    150. 

  150. 2026-06-17 10:38:22,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    151. 

  151. 2026-06-17 10:38:22,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    152. 

  152. 2026-06-17 10:38:22,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 201326848, 'code': 131099}, {'attr': 83886848, 'code': 65546}]
    153. 

  153. 2026-06-17 10:38:22,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    154. 

  154. 2026-06-17 10:38:22,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -73dBm
    155. 

  155. 2026-06-17 10:38:22,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    156. 

  156. 2026-06-17 10:38:22,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [1]
    157. 

  157. 2026-06-17 10:38:22,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Handyhalter_BR_3_Stueck_LaC
    158. 

  158. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    159. 

  159. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    160. 

  160. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    161. 

  161. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '4', 'tray_is_bbl_bits': '4', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': '4', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 58989}
    162. 

  162. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    163. 

  163. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    164. 

  164. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    165. 

  165. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    166. 

  166. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    167. 

  167. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    168. 

  168. 2026-06-17 10:38:22,989 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    169. 

  169. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 27°C (heater OFF)
    170. 

  170. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    171. 

  171. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=27.0, heating=False, respect_local=False
    172. 

  172. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 27.0, target: 0.0, heating: False
    173. 

  173. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    174. 

  174. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    175. 

  175. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    176. 

  176. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    177. 

  177. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    178. 

  178. 2026-06-17 10:38:22,990 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 4+finger+hand+v1_no_muving_thumb_oficial_profile_both_hands_Left_hand+thumb
    179. 

  179. 2026-06-17 10:38:23,567 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 1797559, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    180. 

  180. 2026-06-17 10:38:23,567 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    181. 

  181. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 1797559 (binary: 0b110110110110110110111)
    182. 

  182. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Handyhalter_BR_3_Stueck_LaC
    183. 

  183. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'c', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'c', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'c', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 34189}
    184. 

  184. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    185. 

  185. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    186. 

  186. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    187. 

  187. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    188. 

  188. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    189. 

  189. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    190. 

  190. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=2 (switch_state bits 12-14: 0)
    191. 

  191. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    192. 

  192. 2026-06-17 10:38:23,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    193. 

  193. 2026-06-17 10:38:23,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    194. 

  194. 2026-06-17 10:38:23,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    195. 

  195. 2026-06-17 10:38:23,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 201326848, 'code': 131099}, {'attr': 83886848, 'code': 65546}]
    196. 

  196. 2026-06-17 10:38:23,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    197. 

  197. 2026-06-17 10:38:23,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -73dBm
    198. 

  198. 2026-06-17 10:38:23,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    199. 

  199. 2026-06-17 10:38:23,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [1]
    200. 

  200. 2026-06-17 10:38:23,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Handyhalter_BR_3_Stueck_LaC
    201.