صفحهٔ اصلی گشت‌و‌گذار راهنما
ورود
yunoadmin
/
bambuddy
mirrorاز https://github.com/maziggy/bambuddy
1
0
انشعاب 0
پرونده‌ها مشکلات 0 ویکی
شاخه: bug-report-assets
شاخه‌ها تگ‌ها
bambuddy
/
logs
/
9b44be8c67814844a670685c333812ac.log

9b44be8c67814844a670685c333812ac.log 34 KB
لینک دائمی تاريخچه خام

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-09-25 01:21:07,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    2. 

  2. 2026-09-25 01:21:07,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    3. 

  3. 2026-09-25 01:21:07,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    4. 

  4. 2026-09-25 01:21:07,814 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 37.0
    5. 

  5. 2026-09-25 01:21:07,814 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 37.0°C (heater OFF)
    6. 

  6. 2026-09-25 01:21:07,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    7. 

  7. 2026-09-25 01:21:07,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    8. 

  8. 2026-09-25 01:21:07,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    9. 

  9. 2026-09-25 01:21:07,971 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    10. 

  10. 2026-09-25 01:21:07,972 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    11. 

  11. 2026-09-25 01:21:07,972 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    12. 

  12. 2026-09-25 01:21:07,972 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    13. 

  13. 2026-09-25 01:21:07,973 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    14. 

  14. 2026-09-25 01:21:07,973 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    15. 

  15. 2026-09-25 01:21:07,973 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    16. 

  16. 2026-09-25 01:21:07,974 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    17. 

  17. 2026-09-25 01:21:07,974 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    18. 

  18. 2026-09-25 01:21:07,975 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    19. 

  19. 2026-09-25 01:21:08,172 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    20. 

  20. 2026-09-25 01:21:08,172 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    21. 

  21. 2026-09-25 01:21:08,172 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    22. 

  22. 2026-09-25 01:21:08,173 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    23. 

  23. 2026-09-25 01:21:08,174 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    24. 

  24. 2026-09-25 01:21:08,174 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    25. 

  25. 2026-09-25 01:21:08,174 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    26. 

  26. 2026-09-25 01:21:08,175 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    27. 

  27. 2026-09-25 01:21:08,175 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    28. 

  28. 2026-09-25 01:21:08,352 INFO [uvicorn.access] [-] [IP]:50944 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    29. 

  29. 2026-09-25 01:21:08,478 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 171757 bytes
    30. 

  30. 2026-09-25 01:21:08,823 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    31. 

  31. 2026-09-25 01:21:08,824 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    32. 

  32. 2026-09-25 01:21:08,824 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    33. 

  33. 2026-09-25 01:21:08,825 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    34. 

  34. 2026-09-25 01:21:08,825 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 37.0
    35. 

  35. 2026-09-25 01:21:08,826 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 37.0°C (heater OFF)
    36. 

  36. 2026-09-25 01:21:08,826 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    37. 

  37. 2026-09-25 01:21:08,826 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    38. 

  38. 2026-09-25 01:21:08,827 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    39. 

  39. 2026-09-25 01:21:08,985 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    40. 

  40. 2026-09-25 01:21:08,985 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    41. 

  41. 2026-09-25 01:21:08,986 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    42. 

  42. 2026-09-25 01:21:08,986 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    43. 

  43. 2026-09-25 01:21:08,987 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    44. 

  44. 2026-09-25 01:21:08,987 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    45. 

  45. 2026-09-25 01:21:08,988 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    46. 

  46. 2026-09-25 01:21:08,988 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    47. 

  47. 2026-09-25 01:21:08,990 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    48. 

  48. 2026-09-25 01:21:08,991 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    49. 

  49. 2026-09-25 01:21:08,995 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:34679
    50. 

  50. 2026-09-25 01:21:08,995 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    51. 

  51. 2026-09-25 01:21:09,180 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    52. 

  52. 2026-09-25 01:21:09,181 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    53. 

  53. 2026-09-25 01:21:09,181 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    54. 

  54. 2026-09-25 01:21:09,182 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    55. 

  55. 2026-09-25 01:21:09,183 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    56. 

  56. 2026-09-25 01:21:09,183 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    57. 

  57. 2026-09-25 01:21:09,184 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    58. 

  58. 2026-09-25 01:21:09,184 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    59. 

  59. 2026-09-25 01:21:09,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    60. 

  60. 2026-09-25 01:21:09,337 INFO [uvicorn.access] [-] [IP]:50968 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    61. 

  61. 2026-09-25 01:21:09,867 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    62. 

  62. 2026-09-25 01:21:09,867 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    63. 

  63. 2026-09-25 01:21:09,867 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    64. 

  64. 2026-09-25 01:21:09,868 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    65. 

  65. 2026-09-25 01:21:09,868 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 37.0
    66. 

  66. 2026-09-25 01:21:09,869 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 37.0°C (heater OFF)
    67. 

  67. 2026-09-25 01:21:09,869 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    68. 

  68. 2026-09-25 01:21:09,870 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    69. 

  69. 2026-09-25 01:21:09,870 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    70. 

  70. 2026-09-25 01:21:09,995 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    71. 

  71. 2026-09-25 01:21:09,996 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    72. 

  72. 2026-09-25 01:21:09,996 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    73. 

  73. 2026-09-25 01:21:09,997 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    74. 

  74. 2026-09-25 01:21:09,998 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    75. 

  75. 2026-09-25 01:21:10,001 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    76. 

  76. 2026-09-25 01:21:10,001 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    77. 

  77. 2026-09-25 01:21:10,002 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    78. 

  78. 2026-09-25 01:21:10,003 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    79. 

  79. 2026-09-25 01:21:10,003 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    80. 

  80. 2026-09-25 01:21:10,218 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    81. 

  81. 2026-09-25 01:21:10,219 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    82. 

  82. 2026-09-25 01:21:10,219 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    83. 

  83. 2026-09-25 01:21:10,220 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    84. 

  84. 2026-09-25 01:21:10,220 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    85. 

  85. 2026-09-25 01:21:10,220 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    86. 

  86. 2026-09-25 01:21:10,221 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    87. 

  87. 2026-09-25 01:21:10,221 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    88. 

  88. 2026-09-25 01:21:10,222 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    89. 

  89. 2026-09-25 01:21:10,466 INFO [uvicorn.access] [-] [IP]:50980 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    90. 

  90. 2026-09-25 01:21:10,614 INFO [uvicorn.access] [-] [IP]:50986 - "POST /api/v1/spoolbuddy/devices/spoolbuddy-scale-3bplus/heartbeat HTTP/1.1" 200
    91. 

  91. 2026-09-25 01:21:10,868 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    92. 

  92. 2026-09-25 01:21:10,868 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    93. 

  93. 2026-09-25 01:21:10,868 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    94. 

  94. 2026-09-25 01:21:10,869 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    95. 

  95. 2026-09-25 01:21:10,870 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 37.0
    96. 

  96. 2026-09-25 01:21:10,870 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 37.0°C (heater OFF)
    97. 

  97. 2026-09-25 01:21:10,870 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    98. 

  98. 2026-09-25 01:21:10,871 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    99. 

  99. 2026-09-25 01:21:10,872 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    100. 

  100. 2026-09-25 01:21:11,004 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    101. 

  101. 2026-09-25 01:21:11,004 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    102. 

  102. 2026-09-25 01:21:11,004 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    103. 

  103. 2026-09-25 01:21:11,005 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    104. 

  104. 2026-09-25 01:21:11,006 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    105. 

  105. 2026-09-25 01:21:11,006 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    106. 

  106. 2026-09-25 01:21:11,006 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    107. 

  107. 2026-09-25 01:21:11,007 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    108. 

  108. 2026-09-25 01:21:11,007 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    109. 

  109. 2026-09-25 01:21:11,008 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    110. 

  110. 2026-09-25 01:21:11,232 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    111. 

  111. 2026-09-25 01:21:11,233 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    112. 

  112. 2026-09-25 01:21:11,233 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    113. 

  113. 2026-09-25 01:21:11,234 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    114. 

  114. 2026-09-25 01:21:11,234 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    115. 

  115. 2026-09-25 01:21:11,234 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    116. 

  116. 2026-09-25 01:21:11,235 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    117. 

  117. 2026-09-25 01:21:11,235 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    118. 

  118. 2026-09-25 01:21:11,236 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    119. 

  119. 2026-09-25 01:21:11,559 INFO [uvicorn.access] [-] [IP]:50998 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    120. 

  120. 2026-09-25 01:21:11,787 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 85857 bytes
    121. 

  121. 2026-09-25 01:21:11,890 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    122. 

  122. 2026-09-25 01:21:11,891 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    123. 

  123. 2026-09-25 01:21:11,891 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    124. 

  124. 2026-09-25 01:21:11,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    125. 

  125. 2026-09-25 01:21:11,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 37.0
    126. 

  126. 2026-09-25 01:21:11,893 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 37.0°C (heater OFF)
    127. 

  127. 2026-09-25 01:21:11,893 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    128. 

  128. 2026-09-25 01:21:11,893 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    129. 

  129. 2026-09-25 01:21:11,894 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    130. 

  130. 2026-09-25 01:21:12,043 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    131. 

  131. 2026-09-25 01:21:12,044 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    132. 

  132. 2026-09-25 01:21:12,044 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    133. 

  133. 2026-09-25 01:21:12,045 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    134. 

  134. 2026-09-25 01:21:12,045 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    135. 

  135. 2026-09-25 01:21:12,046 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    136. 

  136. 2026-09-25 01:21:12,046 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    137. 

  137. 2026-09-25 01:21:12,046 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    138. 

  138. 2026-09-25 01:21:12,047 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    139. 

  139. 2026-09-25 01:21:12,047 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    140. 

  140. 2026-09-25 01:21:12,278 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    141. 

  141. 2026-09-25 01:21:12,278 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    142. 

  142. 2026-09-25 01:21:12,279 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    143. 

  143. 2026-09-25 01:21:12,279 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    144. 

  144. 2026-09-25 01:21:12,280 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    145. 

  145. 2026-09-25 01:21:12,280 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    146. 

  146. 2026-09-25 01:21:12,280 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    147. 

  147. 2026-09-25 01:21:12,281 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    148. 

  148. 2026-09-25 01:21:12,281 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    149. 

  149. 2026-09-25 01:21:12,624 INFO [uvicorn.access] [-] [IP]:35416 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    150. 

  150. 2026-09-25 01:21:12,914 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    151. 

  151. 2026-09-25 01:21:12,915 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    152. 

  152. 2026-09-25 01:21:12,915 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    153. 

  153. 2026-09-25 01:21:12,916 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    154. 

  154. 2026-09-25 01:21:12,916 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 37.0
    155. 

  155. 2026-09-25 01:21:12,917 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 37.0°C (heater OFF)
    156. 

  156. 2026-09-25 01:21:12,919 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    157. 

  157. 2026-09-25 01:21:12,920 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    158. 

  158. 2026-09-25 01:21:12,920 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    159. 

  159. 2026-09-25 01:21:12,932 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 3
    160. 

  160. 2026-09-25 01:21:12,935 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:42885
    161. 

  161. 2026-09-25 01:21:12,935 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    162. 

  162. 2026-09-25 01:21:13,063 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    163. 

  163. 2026-09-25 01:21:13,065 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    164. 

  164. 2026-09-25 01:21:13,066 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    165. 

  165. 2026-09-25 01:21:13,067 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    166. 

  166. 2026-09-25 01:21:13,068 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    167. 

  167. 2026-09-25 01:21:13,068 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    168. 

  168. 2026-09-25 01:21:13,069 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    169. 

  169. 2026-09-25 01:21:13,069 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    170. 

  170. 2026-09-25 01:21:13,071 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    171. 

  171. 2026-09-25 01:21:13,073 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    172. 

  172. 2026-09-25 01:21:13,301 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    173. 

  173. 2026-09-25 01:21:13,301 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    174. 

  174. 2026-09-25 01:21:13,302 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    175. 

  175. 2026-09-25 01:21:13,303 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    176. 

  176. 2026-09-25 01:21:13,303 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    177. 

  177. 2026-09-25 01:21:13,304 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    178. 

  178. 2026-09-25 01:21:13,304 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    179. 

  179. 2026-09-25 01:21:13,305 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    180. 

  180. 2026-09-25 01:21:13,305 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: AMS_SuperMesh_-_Middle_Only_-_6_Boxes_6_Lids_-_PETG_Gray_-_Engineering_Glue_-_No_Brim_-_Foopie
    181. 

  181. 2026-09-25 01:21:13,735 INFO [uvicorn.access] [-] [IP]:35432 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    182. 

  182. 2026-09-25 01:21:13,939 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    183. 

  183. 2026-09-25 01:21:13,940 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    184. 

  184. 2026-09-25 01:21:13,940 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    185. 

  185. 2026-09-25 01:21:13,941 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    186. 

  186. 2026-09-25 01:21:13,941 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 37.0
    187. 

  187. 2026-09-25 01:21:13,941 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 37.0°C (heater OFF)
    188. 

  188. 2026-09-25 01:21:13,942 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    189. 

  189. 2026-09-25 01:21:13,942 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    190. 

  190. 2026-09-25 01:21:13,943 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: 02_-_Touch_Display_2_-_Self-Aligning_Rear_Lid_-_Multicolor_Green
    191. 

  191. 2026-09-25 01:21:14,065 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    192. 

  192. 2026-09-25 01:21:14,065 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    193. 

  193. 2026-09-25 01:21:14,065 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    194. 

  194. 2026-09-25 01:21:14,066 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    195. 

  195. 2026-09-25 01:21:14,067 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    196. 

  196. 2026-09-25 01:21:14,067 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    197. 

  197. 2026-09-25 01:21:14,067 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    198. 

  198. 2026-09-25 01:21:14,068 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    199. 

  199. 2026-09-25 01:21:14,068 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    200. 

  200. 2026-09-25 01:21:14,069 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    201.