Ana Sayfa Keşfet Yardım
Giriş Yap
yunoadmin
/
bambuddy
şunun yansıması https://github.com/maziggy/bambuddy
1
0
Çatalla 0
Dosyalar Sorunlar 0 Wiki
Dal: bug-report-assets
Dallar Biçim İmleri
bambuddy
/
logs
/
0c2e003cea4f46fb9801f1981bacdae7.log

0c2e003cea4f46fb9801f1981bacdae7.log 35 KB
Kalıcı Bağlantı Geçmiş Ham

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-10-21 19:09:06,068 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    2. 

  2. 2026-10-21 19:09:06,078 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_4.gcode, subtask_name: Caps_-_All_P2S
    3. 

  3. 2026-10-21 19:09:06,079 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    4. 

  4. 2026-10-21 19:09:06,091 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    5. 

  5. 2026-10-21 19:09:06,092 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 134160384, 'code': 131073, 'ts_boot': 195281804, 'ts_unix': '20261021193749'}]
    6. 

  6. 2026-10-21 19:09:06,092 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 134184977 (0x07ff8011) -> short_code=07FF_8011
    7. 

  7. 2026-10-21 19:09:06,092 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 07FF8011] HMS available actions: ['RESUME_PRINTING_PROBELM_SOLVED', 'CHECK_ASSISTANT'] (job_id=1579890254)
    8. 

  8. 2026-10-21 19:09:06,093 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    9. 

  9. 2026-10-21 19:09:06,094 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    10. 

  10. 2026-10-21 19:09:06,094 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_4.gcode, subtask: Caps_-_All_P2S
    11. 

  11. 2026-10-21 19:09:06,321 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    12. 

  12. 2026-10-21 19:09:06,322 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    13. 

  13. 2026-10-21 19:09:06,324 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    14. 

  14. 2026-10-21 19:09:06,324 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: Pickles
    15. 

  15. 2026-10-21 19:09:06,324 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'1': 0}
    16. 

  16. 2026-10-21 19:09:06,324 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    17. 

  17. 2026-10-21 19:09:06,325 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 50343424, 'code': 196609, 'ts_boot': 13274, 'ts_unix': '20261015201711'}]
    18. 

  18. 2026-10-21 19:09:06,325 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    19. 

  19. 2026-10-21 19:09:06,326 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [259]
    20. 

  20. 2026-10-21 19:09:06,326 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_2.gcode, subtask: Pickles
    21. 

  21. 2026-10-21 19:09:06,487 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT publish to device/[SERIAL]/request: {"print":{"command":"extrusion_cali_get","filament_id":"","nozzle_diameter":"0.4","sequence_id":"276...
    22. 

  22. 2026-10-21 19:09:06,487 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT print command: extrusion_cali_get for 
    23. 

  23. 2026-10-21 19:09:06,624 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    24. 

  24. 2026-10-21 19:09:06,624 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    25. 

  25. 2026-10-21 19:09:06,625 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -77dBm
    26. 

  26. 2026-10-21 19:09:07,332 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    27. 

  27. 2026-10-21 19:09:07,332 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    28. 

  28. 2026-10-21 19:09:07,332 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    29. 

  29. 2026-10-21 19:09:07,342 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_4.gcode, subtask_name: Caps_-_All_P2S
    30. 

  30. 2026-10-21 19:09:07,355 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    31. 

  31. 2026-10-21 19:09:07,356 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    32. 

  32. 2026-10-21 19:09:07,357 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 134160384, 'code': 131073, 'ts_boot': 195281804, 'ts_unix': '20261021193749'}]
    33. 

  33. 2026-10-21 19:09:07,357 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 134184977 (0x07ff8011) -> short_code=07FF_8011
    34. 

  34. 2026-10-21 19:09:07,357 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 07FF8011] HMS available actions: ['RESUME_PRINTING_PROBELM_SOLVED', 'CHECK_ASSISTANT'] (job_id=1579890254)
    35. 

  35. 2026-10-21 19:09:07,357 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 14601056, 'tl_external_total_kb': 60048640, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    36. 

  36. 2026-10-21 19:09:07,358 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    37. 

  37. 2026-10-21 19:09:07,359 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    38. 

  38. 2026-10-21 19:09:07,359 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_4.gcode, subtask: Caps_-_All_P2S
    39. 

  39. 2026-10-21 19:09:07,489 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT publish to device/[SERIAL]/request: {"print":{"command":"extrusion_cali_get","filament_id":"","nozzle_diameter":"0.4","sequence_id":"276...
    40. 

  40. 2026-10-21 19:09:07,490 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT print command: extrusion_cali_get for 
    41. 

  41. 2026-10-21 19:09:07,559 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    42. 

  42. 2026-10-21 19:09:07,559 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    43. 

  43. 2026-10-21 19:09:07,559 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    44. 

  44. 2026-10-21 19:09:07,559 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: Pickles
    45. 

  45. 2026-10-21 19:09:07,559 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'1': 0}
    46. 

  46. 2026-10-21 19:09:07,560 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    47. 

  47. 2026-10-21 19:09:07,568 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 50343424, 'code': 196609, 'ts_boot': 13274, 'ts_unix': '20261015201711'}]
    48. 

  48. 2026-10-21 19:09:07,568 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    49. 

  49. 2026-10-21 19:09:07,568 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [259]
    50. 

  50. 2026-10-21 19:09:07,569 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_2.gcode, subtask: Pickles
    51. 

  51. 2026-10-21 19:09:08,242 INFO [uvicorn.access] [-] [IP]:50245 - "POST /api/v1/printers/camera/stream-token HTTP/1.1" 200
    52. 

  52. 2026-10-21 19:09:08,251 INFO [uvicorn.access] [-] [IP]:58945 - "POST /api/v1/auth/media-token HTTP/1.1" 200
    53. 

  53. 2026-10-21 19:09:08,379 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    54. 

  54. 2026-10-21 19:09:08,379 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    55. 

  55. 2026-10-21 19:09:08,380 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    56. 

  56. 2026-10-21 19:09:08,380 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_4.gcode, subtask_name: Caps_-_All_P2S
    57. 

  57. 2026-10-21 19:09:08,380 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    58. 

  58. 2026-10-21 19:09:08,380 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    59. 

  59. 2026-10-21 19:09:08,381 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 134160384, 'code': 131073, 'ts_boot': 195281804, 'ts_unix': '20261021193749'}]
    60. 

  60. 2026-10-21 19:09:08,381 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 134184977 (0x07ff8011) -> short_code=07FF_8011
    61. 

  61. 2026-10-21 19:09:08,382 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 07FF8011] HMS available actions: ['RESUME_PRINTING_PROBELM_SOLVED', 'CHECK_ASSISTANT'] (job_id=1579890254)
    62. 

  62. 2026-10-21 19:09:08,382 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    63. 

  63. 2026-10-21 19:09:08,387 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    64. 

  64. 2026-10-21 19:09:08,388 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_4.gcode, subtask: Caps_-_All_P2S
    65. 

  65. 2026-10-21 19:09:08,510 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT publish to device/[SERIAL]/request: {"print":{"command":"extrusion_cali_get","filament_id":"","nozzle_diameter":"0.4","sequence_id":"276...
    66. 

  66. 2026-10-21 19:09:08,510 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT print command: extrusion_cali_get for 
    67. 

  67. 2026-10-21 19:09:08,554 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    68. 

  68. 2026-10-21 19:09:08,554 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -53dBm
    69. 

  69. 2026-10-21 19:09:08,598 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    70. 

  70. 2026-10-21 19:09:08,598 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    71. 

  71. 2026-10-21 19:09:08,598 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    72. 

  72. 2026-10-21 19:09:08,599 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: Pickles
    73. 

  73. 2026-10-21 19:09:08,599 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'1': 0}
    74. 

  74. 2026-10-21 19:09:08,599 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    75. 

  75. 2026-10-21 19:09:08,599 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 50343424, 'code': 196609, 'ts_boot': 13274, 'ts_unix': '20261015201711'}]
    76. 

  76. 2026-10-21 19:09:08,600 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    77. 

  77. 2026-10-21 19:09:08,600 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [259]
    78. 

  78. 2026-10-21 19:09:08,600 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_2.gcode, subtask: Pickles
    79. 

  79. 2026-10-21 19:09:08,679 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    80. 

  80. 2026-10-21 19:09:08,817 DEBUG [backend.app.api.routes.printers] [e16431fd] API returning ams_mapping: [], ams_extruder_map: {'0': 0}
    81. 

  81. 2026-10-21 19:09:08,817 DEBUG [backend.app.api.routes.printers] [e16431fd] Using tray_now directly as global ID: 255
    82. 

  82. 2026-10-21 19:09:08,820 DEBUG [backend.app.api.routes.printers] [26afd1ff] API returning ams_mapping: [], ams_extruder_map: {'0': 0}
    83. 

  83. 2026-10-21 19:09:08,820 DEBUG [backend.app.api.routes.printers] [26afd1ff] Using tray_now directly as global ID: 255
    84. 

  84. 2026-10-21 19:09:09,497 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT publish to device/[SERIAL]/request: {"print":{"command":"extrusion_cali_get","filament_id":"","nozzle_diameter":"0.4","sequence_id":"276...
    85. 

  85. 2026-10-21 19:09:09,497 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT print command: extrusion_cali_get for 
    86. 

  86. 2026-10-21 19:09:09,652 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    87. 

  87. 2026-10-21 19:09:09,654 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    88. 

  88. 2026-10-21 19:09:09,654 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    89. 

  89. 2026-10-21 19:09:09,654 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    90. 

  90. 2026-10-21 19:09:09,654 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    91. 

  91. 2026-10-21 19:09:09,655 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    92. 

  92. 2026-10-21 19:09:09,686 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_4.gcode, subtask_name: Caps_-_All_P2S
    93. 

  93. 2026-10-21 19:09:09,686 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: Pickles
    94. 

  94. 2026-10-21 19:09:09,686 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    95. 

  95. 2026-10-21 19:09:09,688 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'1': 0}
    96. 

  96. 2026-10-21 19:09:09,688 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    97. 

  97. 2026-10-21 19:09:09,689 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    98. 

  98. 2026-10-21 19:09:09,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 134160384, 'code': 131073, 'ts_boot': 195281804, 'ts_unix': '20261021193749'}]
    99. 

  99. 2026-10-21 19:09:09,691 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 50343424, 'code': 196609, 'ts_boot': 13274, 'ts_unix': '20261015201711'}]
    100. 

  100. 2026-10-21 19:09:09,693 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 134184977 (0x07ff8011) -> short_code=07FF_8011
    101. 

  101. 2026-10-21 19:09:09,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    102. 

  102. 2026-10-21 19:09:09,699 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 07FF8011] HMS available actions: ['RESUME_PRINTING_PROBELM_SOLVED', 'CHECK_ASSISTANT'] (job_id=1579890254)
    103. 

  103. 2026-10-21 19:09:09,701 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [259]
    104. 

  104. 2026-10-21 19:09:09,701 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 14600800, 'tl_external_total_kb': 60048640, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    105. 

  105. 2026-10-21 19:09:09,702 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_2.gcode, subtask: Pickles
    106. 

  106. 2026-10-21 19:09:09,703 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    107. 

  107. 2026-10-21 19:09:09,711 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    108. 

  108. 2026-10-21 19:09:09,711 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_4.gcode, subtask: Caps_-_All_P2S
    109. 

  109. 2026-10-21 19:09:10,496 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT publish to device/[SERIAL]/request: {"print":{"command":"extrusion_cali_get","filament_id":"","nozzle_diameter":"0.4","sequence_id":"276...
    110. 

  110. 2026-10-21 19:09:10,497 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT print command: extrusion_cali_get for 
    111. 

  111. 2026-10-21 19:09:10,689 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    112. 

  112. 2026-10-21 19:09:10,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    113. 

  113. 2026-10-21 19:09:10,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    114. 

  114. 2026-10-21 19:09:10,691 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: Pickles
    115. 

  115. 2026-10-21 19:09:10,691 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'1': 0}
    116. 

  116. 2026-10-21 19:09:10,691 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    117. 

  117. 2026-10-21 19:09:10,692 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 50343424, 'code': 196609, 'ts_boot': 13274, 'ts_unix': '20261015201711'}]
    118. 

  118. 2026-10-21 19:09:10,692 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    119. 

  119. 2026-10-21 19:09:10,693 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [259]
    120. 

  120. 2026-10-21 19:09:10,701 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_2.gcode, subtask: Pickles
    121. 

  121. 2026-10-21 19:09:10,712 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    122. 

  122. 2026-10-21 19:09:10,716 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    123. 

  123. 2026-10-21 19:09:10,717 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    124. 

  124. 2026-10-21 19:09:10,717 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    125. 

  125. 2026-10-21 19:09:10,719 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_4.gcode, subtask_name: Caps_-_All_P2S
    126. 

  126. 2026-10-21 19:09:10,719 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    127. 

  127. 2026-10-21 19:09:10,719 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    128. 

  128. 2026-10-21 19:09:10,720 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 134160384, 'code': 131073, 'ts_boot': 195281804, 'ts_unix': '20261021193749'}]
    129. 

  129. 2026-10-21 19:09:10,720 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 134184977 (0x07ff8011) -> short_code=07FF_8011
    130. 

  130. 2026-10-21 19:09:10,750 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 07FF8011] HMS available actions: ['RESUME_PRINTING_PROBELM_SOLVED', 'CHECK_ASSISTANT'] (job_id=1579890254)
    131. 

  131. 2026-10-21 19:09:10,750 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 14600288, 'tl_external_total_kb': 60048640, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    132. 

  132. 2026-10-21 19:09:10,750 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    133. 

  133. 2026-10-21 19:09:10,750 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    134. 

  134. 2026-10-21 19:09:10,751 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_4.gcode, subtask: Caps_-_All_P2S
    135. 

  135. 2026-10-21 19:09:11,332 INFO [backend.app.services.virtual_printer.mqtt_server] [-] [Bambuddy-P2S] 1Hz status push: 60 pushes/min to [IP]:59022
    136. 

  136. 2026-10-21 19:09:11,332 INFO [backend.app.services.virtual_printer.mqtt_server] [-] [Bambuddy-P2S] 1Hz status push: 60 pushes/min to [IP]:50609
    137. 

  137. 2026-10-21 19:09:11,497 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT publish to device/[SERIAL]/request: {"print":{"command":"extrusion_cali_get","filament_id":"","nozzle_diameter":"0.4","sequence_id":"276...
    138. 

  138. 2026-10-21 19:09:11,497 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT print command: extrusion_cali_get for 
    139. 

  139. 2026-10-21 19:09:11,718 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    140. 

  140. 2026-10-21 19:09:11,720 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    141. 

  141. 2026-10-21 19:09:11,720 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    142. 

  142. 2026-10-21 19:09:11,720 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: Pickles
    143. 

  143. 2026-10-21 19:09:11,720 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'1': 0}
    144. 

  144. 2026-10-21 19:09:11,721 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    145. 

  145. 2026-10-21 19:09:11,721 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 50343424, 'code': 196609, 'ts_boot': 13274, 'ts_unix': '20261015201711'}]
    146. 

  146. 2026-10-21 19:09:11,722 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    147. 

  147. 2026-10-21 19:09:11,748 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [259]
    148. 

  148. 2026-10-21 19:09:11,748 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_2.gcode, subtask: Pickles
    149. 

  149. 2026-10-21 19:09:11,949 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    150. 

  150. 2026-10-21 19:09:11,949 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    151. 

  151. 2026-10-21 19:09:11,949 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    152. 

  152. 2026-10-21 19:09:11,950 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_4.gcode, subtask_name: Caps_-_All_P2S
    153. 

  153. 2026-10-21 19:09:11,950 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    154. 

  154. 2026-10-21 19:09:11,950 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    155. 

  155. 2026-10-21 19:09:11,951 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 134160384, 'code': 131073, 'ts_boot': 195281804, 'ts_unix': '20261021193749'}]
    156. 

  156. 2026-10-21 19:09:11,951 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 134184977 (0x07ff8011) -> short_code=07FF_8011
    157. 

  157. 2026-10-21 19:09:11,952 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 07FF8011] HMS available actions: ['RESUME_PRINTING_PROBELM_SOLVED', 'CHECK_ASSISTANT'] (job_id=1579890254)
    158. 

  158. 2026-10-21 19:09:11,965 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    159. 

  159. 2026-10-21 19:09:11,982 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    160. 

  160. 2026-10-21 19:09:11,982 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_4.gcode, subtask: Caps_-_All_P2S
    161. 

  161. 2026-10-21 19:09:12,500 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT publish to device/[SERIAL]/request: {"print":{"command":"extrusion_cali_get","filament_id":"","nozzle_diameter":"0.4","sequence_id":"276...
    162. 

  162. 2026-10-21 19:09:12,500 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT print command: extrusion_cali_get for 
    163. 

  163. 2026-10-21 19:09:12,605 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    164. 

  164. 2026-10-21 19:09:12,995 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    165. 

  165. 2026-10-21 19:09:12,995 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    166. 

  166. 2026-10-21 19:09:12,996 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    167. 

  167. 2026-10-21 19:09:12,996 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_4.gcode, subtask_name: Caps_-_All_P2S
    168. 

  168. 2026-10-21 19:09:12,997 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0}
    169. 

  169. 2026-10-21 19:09:12,997 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    170. 

  170. 2026-10-21 19:09:12,997 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 134160384, 'code': 131073, 'ts_boot': 195281804, 'ts_unix': '20261021193749'}]
    171. 

  171. 2026-10-21 19:09:12,998 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 134184977 (0x07ff8011) -> short_code=07FF_8011
    172. 

  172. 2026-10-21 19:09:13,019 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 07FF8011] HMS available actions: ['RESUME_PRINTING_PROBELM_SOLVED', 'CHECK_ASSISTANT'] (job_id=1579890254)
    173. 

  173. 2026-10-21 19:09:13,019 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 14600032, 'tl_external_total_kb': 60048640, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    174. 

  174. 2026-10-21 19:09:13,019 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    175. 

  175. 2026-10-21 19:09:13,018 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    176. 

  176. 2026-10-21 19:09:13,020 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    177. 

  177. 2026-10-21 19:09:13,021 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    178. 

  178. 2026-10-21 19:09:13,021 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_4.gcode, subtask: Caps_-_All_P2S
    179. 

  179. 2026-10-21 19:09:13,021 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    180. 

  180. 2026-10-21 19:09:13,022 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: Pickles
    181. 

  181. 2026-10-21 19:09:13,023 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'1': 0}
    182. 

  182. 2026-10-21 19:09:13,023 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    183. 

  183. 2026-10-21 19:09:13,024 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 50343424, 'code': 196609, 'ts_boot': 13274, 'ts_unix': '20261015201711'}]
    184. 

  184. 2026-10-21 19:09:13,024 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    185. 

  185. 2026-10-21 19:09:13,024 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [259]
    186. 

  186. 2026-10-21 19:09:13,025 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_2.gcode, subtask: Pickles
    187. 

  187. 2026-10-21 19:09:13,431 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP NOTIFY for Bambuddy-P2S (Location=[IP], USN=22E00A391800002, bind=[IP])
    188. 

  188. 2026-10-21 19:09:13,441 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP NOTIFY for Bambuddy-P1S (Location=[IP], USN=[SERIAL], bind=[IP])
    189. 

  189. 2026-10-21 19:09:13,501 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT publish to device/[SERIAL]/request: {"print":{"command":"extrusion_cali_get","filament_id":"","nozzle_diameter":"0.4","sequence_id":"276...
    190. 

  190. 2026-10-21 19:09:13,501 INFO [backend.app.services.virtual_printer.mqtt_server] [-] MQTT print command: extrusion_cali_get for 
    191. 

  191. 2026-10-21 19:09:14,080 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8088999, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    192. 

  192. 2026-10-21 19:09:14,080 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    193. 

  193. 2026-10-21 19:09:14,081 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8088999 (binary: 0b11110110110110110100111)
    194. 

  194. 2026-10-21 19:09:14,082 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: Pickles
    195. 

  195. 2026-10-21 19:09:14,083 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'1': 0}
    196. 

  196. 2026-10-21 19:09:14,083 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    197. 

  197. 2026-10-21 19:09:14,084 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 50343424, 'code': 196609, 'ts_boot': 13274, 'ts_unix': '20261015201711'}]
    198. 

  198. 2026-10-21 19:09:14,092 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    199. 

  199. 2026-10-21 19:09:14,093 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [259]
    200. 

  200. 2026-10-21 19:09:14,095 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_2.gcode, subtask: Pickles
    201.