首頁 探索 說明
登入
yunoadmin
/
bambuddy
镜像来自 https://github.com/maziggy/bambuddy
1
0
複刻 0
Files 問題管理 0 Wiki
目錄樹: b69aad1fed
分支列表 標籤列表
bambuddy
/
logs
/
5a432a7741a34e179654bfa03933c640.log

5a432a7741a34e179654bfa03933c640.log 30 KB
文件歷史 原始文件

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-04-30 21:09:44,088 INFO [backend.app.services.camera] Saved camera frame to: /app/data/archive/1/20260430_210823_v2-reinforced-parallel-2-car-display-1-18_plate_1.gcode/photos/finish_20260430_210942_5052904a.jpg
    2. 

  2. 2026-04-30 21:09:44,088 INFO [backend.app.services.camera] Finish photo saved: finish_20260430_210942_5052904a.jpg
    3. 

  3. 2026-04-30 21:09:44,156 INFO [backend.app.main] [PHOTO-BG] Saved: finish_20260430_210942_5052904a.jpg
    4. 

  4. 2026-04-30 21:09:44,157 INFO [backend.app.main] [PHOTO-NOTIFY] Photo task returned: finish_20260430_210942_5052904a.jpg
    5. 

  5. 2026-04-30 21:09:44,157 INFO [backend.app.main] [NOTIFY-BG] Starting notifications for printer 1, photo=finish_20260430_210942_5052904a.jpg
    6. 

  6. 2026-04-30 21:09:44,169 INFO [backend.app.main] [NOTIFY-BG] Loaded finish photo bytes: 92951 bytes
    7. 

  7. 2026-04-30 21:09:44,169 INFO [backend.app.services.notification_service] on_print_complete called for printer 1 ([PRINTER]), status=failed
    8. 

  8. 2026-04-30 21:09:44,176 INFO [backend.app.services.notification_service] No notification providers configured for on_print_failed event on printer 1
    9. 

  9. 2026-04-30 21:09:44,176 INFO [backend.app.main] [NOTIFY-BG] Completed
    10. 

  10. 2026-04-30 21:10:45,807 INFO [backend.app.api.routes.websocket] WebSocket client connecting...
    11. 

  11. 2026-04-30 21:10:45,808 INFO [backend.app.api.routes.websocket] WebSocket client connected
    12. 

  12. 2026-04-30 21:10:45,809 INFO [backend.app.api.routes.websocket] Sent initial status for 1 printers
    13. 

  13. 2026-04-30 21:11:08,098 INFO [backend.app.api.routes.websocket] WebSocket client disconnected normally
    14. 

  14. 2026-04-30 21:11:31,590 INFO [backend.app.api.routes.websocket] WebSocket client connecting...
    15. 

  15. 2026-04-30 21:11:31,591 INFO [backend.app.api.routes.websocket] WebSocket client connected
    16. 

  16. 2026-04-30 21:11:31,595 INFO [backend.app.api.routes.websocket] Sent initial status for 1 printers
    17. 

  17. 2026-04-30 21:11:46,244 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    18. 

  18. 2026-04-30 21:12:11,597 INFO [backend.app.api.routes.websocket] WebSocket client disconnected normally
    19. 

  19. 2026-04-30 21:12:29,428 INFO [backend.app.api.routes.websocket] WebSocket client connecting...
    20. 

  20. 2026-04-30 21:12:29,429 INFO [backend.app.api.routes.websocket] WebSocket client connected
    21. 

  21. 2026-04-30 21:12:29,433 INFO [backend.app.api.routes.websocket] Sent initial status for 1 printers
    22. 

  22. 2026-04-30 21:16:46,472 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    23. 

  23. 2026-04-30 21:21:46,653 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    24. 

  24. 2026-04-30 21:26:46,856 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    25. 

  25. 2026-04-30 21:31:47,139 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    26. 

  26. 2026-04-30 21:36:47,422 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    27. 

  27. 2026-04-30 21:41:47,596 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    28. 

  28. 2026-04-30 21:46:47,847 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    29. 

  29. 2026-04-30 21:50:38,769 WARNING [backend.app.core.encryption] MFA_ENCRYPTION_KEY is not set — TOTP secrets and OIDC client_secrets are stored in plaintext. Generate a key with: python -c "from cryptography.fernet import Fernet; print(Fernet.generate_key().decode())"
    30. 

  30. 2026-04-30 21:50:40,833 INFO [backend.app.api.routes.mfa] OIDC provider 1: ignoring email for sub='[USER]' because email_verified=False
    31. 

  31. 2026-04-30 21:50:42,460 INFO [backend.app.api.routes.websocket] WebSocket client connecting...
    32. 

  32. 2026-04-30 21:50:42,460 INFO [backend.app.api.routes.websocket] WebSocket client connected
    33. 

  33. 2026-04-30 21:50:42,463 INFO [backend.app.api.routes.websocket] Sent initial status for 1 printers
    34. 

  34. 2026-04-30 21:50:44,690 INFO [backend.app.api.routes.cloud] get_filament_info called with 3 IDs: ['GFL99', 'GFG99', 'GFU99']
    35. 

  35. 2026-04-30 21:50:45,615 INFO [backend.app.services.firmware_check] Got Bambu Lab build ID: qlInJoEY-IkhFrtF0HKX1
    36. 

  36. 2026-04-30 21:51:19,280 INFO [backend.app.services.bambu_ftp] FTP connected successfully to [IP] (model=X1C, prot_c=False)
    37. 

  37. 2026-04-30 21:51:19,285 WARNING [backend.app.services.bambu_ftp] Failed to delete /v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf: 550 Delete operation failed.
    38. 

  38. 2026-04-30 21:51:19,296 INFO [backend.app.services.bambu_ftp] FTP connecting to [IP] for upload (model=X1C, mode=prot_p, socket_timeout=30.0s)...
    39. 

  39. 2026-04-30 21:51:19,466 INFO [backend.app.services.bambu_ftp] FTP connected successfully to [IP] (model=X1C, prot_c=False)
    40. 

  40. 2026-04-30 21:51:19,467 INFO [backend.app.services.bambu_ftp] FTP connected to [IP]
    41. 

  41. 2026-04-30 21:51:19,468 INFO [backend.app.services.bambu_ftp] FTP uploading /app/data/archive/library/files/e0810482ecf44b30854b57976eca1162.3mf (6898670 bytes) to /v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf
    42. 

  42. 2026-04-30 21:51:19,506 INFO [backend.app.services.bambu_ftp] FTP data channel ready in 0.0s (PASV + TLS handshake)
    43. 

  43. 2026-04-30 21:51:21,190 WARNING [backend.app.services.bambu_ftp] FTP STOR confirmation not received for /v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf (proceeding): 426 Failure reading network stream. (error_temp)
    44. 

  44. 2026-04-30 21:51:21,191 INFO [backend.app.services.bambu_ftp] FTP upload complete: /v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf (6898670 bytes in 1.7s, 3912 KB/s)
    45. 

  45. 2026-04-30 21:51:21,191 INFO [backend.app.services.bambu_ftp] FTP mode cached for [IP]: prot_p
    46. 

  46. 2026-04-30 21:51:21,211 INFO [backend.app.main] Registered expected print: printer=1, file=v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf, archive=10, ams_mapping=[2]
    47. 

  47. 2026-04-30 21:51:21,216 INFO [backend.app.services.printer_manager] PRINT COMMAND: printer=1, file=v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf, caller=background_dispatch.py:542:_process_job
    48. 

  48. 2026-04-30 21:51:21,217 INFO [backend.app.services.bambu_mqtt] [[SERIAL]] Sending print command: {"print": {"sequence_id": "20000", "command": "project_file", "param": "Metadata/plate_1.gcode", "url": "ftp://v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf", "file": "v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf", "md5": "", "bed_type": "auto", "timelapse": true, "bed_leveling": true, "auto_bed_leveling": 1, "flow_cali": true, "vibration_cali": true, "layer_inspect": true, "use_ams": true, "cfg": "0", "extrude_cali_flag": 0, "extrude_cali_manual_mode": 0, "nozzle_offset_cali": 2, "subtask_name": "v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m", "profile_id": "0", "project_id": "1609705148", "subtask_id": "1609705148", "task_id": "1609705148", "ams_mapping": [2], "ams_mapping2": [{"ams_id": 0, "slot_id": 2}]}}
    49. 

  49. 2026-04-30 21:51:21,223 INFO [backend.app.services.bambu_mqtt] [[SERIAL]] Captured ams_mapping from print command: [2]
    50. 

  50. 2026-04-30 21:51:36,224 WARNING [backend.app.services.background_dispatch] Printer [PRINTER] (1) did not respond to print command within 15s (state still FAILED) — printer may need restart
    51. 

  51. 2026-04-30 21:51:36,225 WARNING [backend.app.services.bambu_mqtt] [[SERIAL]] Forcing MQTT reconnect: print command unacknowledged after 15s (state still FAILED)
    52. 

  52. 2026-04-30 21:51:36,288 INFO [backend.app.services.bambu_mqtt] [[SERIAL]] Disconnect callback after stale reconnect (expected), rc=Unspecified error
    53. 

  53. 2026-04-30 21:51:37,393 INFO [backend.app.services.bambu_mqtt] [[SERIAL]] Request topic subscription accepted. ams_mapping capture enabled for slicer-initiated prints.
    54. 

  54. 2026-04-30 21:51:48,084 INFO [backend.app.main] Recorded 1 AMS sensor history entries
    55. 

  55. 2026-04-30 21:52:27,723 INFO [backend.app.api.routes.websocket] WebSocket client disconnected normally
    56. 

  56. 2026-04-30 21:52:34,359 INFO [backend.app.services.bambu_mqtt] [[SERIAL]] PRINT START detected - file: /data/Metadata/plate_1.gcode, subtask: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m, is_new: True, is_file_change: False
    57. 

  57. 2026-04-30 21:52:34,361 INFO [backend.app.main] [CALLBACK] on_print_start called for printer 1, data keys: ['filename', 'subtask_name', 'remaining_time', 'raw_data', 'ams_mapping']
    58. 

  58. 2026-04-30 21:52:34,439 INFO [backend.app.main] [PLATE CHECK] printer_id=1, plate_detection_enabled=True
    59. 

  59. 2026-04-30 21:52:34,440 INFO [backend.app.main] [PLATE CHECK] ENTERING plate detection code for printer 1
    60. 

  60. 2026-04-30 21:52:34,440 INFO [backend.app.main] [PLATE CHECK] Running plate detection for printer 1
    61. 

  61. 2026-04-30 21:52:34,445 INFO [backend.app.services.camera] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    62. 

  62. 2026-04-30 21:52:35,564 INFO [backend.app.api.routes.printers] Detected plate number 1 from gcode_file: /data/Metadata/plate_1.gcode
    63. 

  63. 2026-04-30 21:52:35,565 INFO [backend.app.api.routes.printers] Trying to download cover for 'v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m' from [IP] (trying 8 paths)
    64. 

  64. 2026-04-30 21:52:35,691 INFO [backend.app.services.bambu_ftp] FTP connected successfully to [IP] (model=X1C, prot_c=False)
    65. 

  65. 2026-04-30 21:52:35,727 INFO [backend.app.services.bambu_ftp] FTP download failed for /v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.gcode.3mf: 550 Failed to open file. (not on printer)
    66. 

  66. 2026-04-30 21:52:35,769 INFO [backend.app.services.bambu_ftp] FTP download failed for /cache/v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.gcode.3mf: 550 Failed to open file. (not on printer)
    67. 

  67. 2026-04-30 21:52:35,797 INFO [backend.app.services.bambu_ftp] FTP download failed for /model/v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.gcode.3mf: 550 Failed to open file. (not on printer)
    68. 

  68. 2026-04-30 21:52:35,847 INFO [backend.app.services.bambu_ftp] FTP download failed for /data/v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.gcode.3mf: 550 Failed to open file. (not on printer)
    69. 

  69. 2026-04-30 21:52:36,394 INFO [backend.app.services.camera] Successfully captured camera frame bytes: 90701 bytes
    70. 

  70. 2026-04-30 21:52:36,395 INFO [backend.app.services.camera] Saved camera frame to: /tmp/tmpgdxnjop2.jpg
    71. 

  71. 2026-04-30 21:52:36,583 WARNING [backend.app.main] [PLATE CHECK] Objects detected on plate for printer 1! Confidence: 100%, Diff: 5.1%
    72. 

  72. 2026-04-30 21:52:36,584 INFO [backend.app.services.bambu_mqtt] [[SERIAL]] Sent pause print command
    73. 

  73. 2026-04-30 21:52:36,584 INFO [backend.app.main] [PLATE CHECK] Print paused for printer 1
    74. 

  74. 2026-04-30 21:52:36,589 INFO [backend.app.main] [CALLBACK] Print start detected - filename: /data/Metadata/plate_1.gcode, subtask: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    75. 

  75. 2026-04-30 21:52:36,589 INFO [backend.app.main] Using expected archive 10 for print (skipping duplicate)
    76. 

  76. 2026-04-30 21:52:36,840 INFO [backend.app.main] [ENERGY] No smart plug for printer 1 (archive 10)
    77. 

  77. 2026-04-30 21:52:36,847 INFO [backend.app.main] [SNAPSHOT] Capturing fresh frame for printer 1
    78. 

  78. 2026-04-30 21:52:36,848 INFO [backend.app.services.camera] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    79. 

  79. 2026-04-30 21:52:38,467 INFO [backend.app.services.camera] Successfully captured camera frame bytes: 98800 bytes
    80. 

  80. 2026-04-30 21:52:38,467 INFO [backend.app.main] [SNAPSHOT] Fresh camera frame: 98800 bytes
    81. 

  81. 2026-04-30 21:52:38,468 INFO [backend.app.services.notification_service] on_print_start called for printer 1 ([PRINTER])
    82. 

  82. 2026-04-30 21:52:38,474 INFO [backend.app.services.notification_service] No notification providers configured for print_start event on printer 1
    83. 

  83. 2026-04-30 21:52:38,487 INFO [backend.app.main] Loaded 2 printable objects for printer 1
    84. 

  84. 2026-04-30 21:52:39,525 INFO [backend.app.services.bambu_ftp] Successfully downloaded /v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.3mf to /app/data/archive/temp/cover_1_v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m.gcode.3mf (6898670 bytes)
    85. 

  85. 2026-04-30 21:52:39,534 INFO [backend.app.api.routes.printers] Downloaded file size: 6898670 bytes
    86. 

  86. 2026-04-30 21:53:07,763 INFO [backend.app.api.routes.mfa] OIDC provider 1: ignoring email for sub='[USER]' because email_verified=False
    87. 

  87. 2026-04-30 21:53:11,236 INFO [backend.app.api.routes.websocket] WebSocket client connecting...
    88. 

  88. 2026-04-30 21:53:11,237 INFO [backend.app.api.routes.websocket] WebSocket client connected
    89. 

  89. 2026-04-30 21:53:11,241 INFO [backend.app.api.routes.websocket] Sent initial status for 1 printers
    90. 

  90. 2026-04-30 21:53:13,441 INFO [backend.app.api.routes.printers] Detected plate number 1 from gcode_file: /data/Metadata/plate_1.gcode
    91. 

  91. 2026-04-30 21:53:14,520 INFO [backend.app.api.routes.cloud] get_filament_info called with 3 IDs: ['GFL99', 'GFG99', 'GFU99']
    92. 

  92. 2026-04-30 21:53:31,579 INFO [backend.app.api.routes.support] Log level changed to DEBUG
    93. 

  93. 2026-04-30 21:53:31,580 INFO [backend.app.api.routes.bug_report] Bug report: enabled debug logging
    94. 

  94. 2026-04-30 21:53:31,581 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Requesting status update (pushall)
    95. 

  95. 2026-04-30 21:53:31,625 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Requesting status update (pushall)
    96. 

  96. 2026-04-30 21:53:31,794 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    97. 

  97. 2026-04-30 21:53:31,795 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    98. 

  98. 2026-04-30 21:53:31,796 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    99. 

  99. 2026-04-30 21:53:31,797 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 146}
    100. 

  100. 2026-04-30 21:53:31,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    101. 

  101. 2026-04-30 21:53:31,799 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    102. 

  102. 2026-04-30 21:53:31,800 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    103. 

  103. 2026-04-30 21:53:31,801 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    104. 

  104. 2026-04-30 21:53:31,803 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    105. 

  105. 2026-04-30 21:53:31,803 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    106. 

  106. 2026-04-30 21:53:31,804 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    107. 

  107. 2026-04-30 21:53:31,805 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    108. 

  108. 2026-04-30 21:53:31,806 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    109. 

  109. 2026-04-30 21:53:31,807 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    110. 

  110. 2026-04-30 21:53:31,808 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    111. 

  111. 2026-04-30 21:53:31,809 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    112. 

  112. 2026-04-30 21:53:31,810 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    113. 

  113. 2026-04-30 21:53:31,811 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -39dBm
    114. 

  114. 2026-04-30 21:53:31,812 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    115. 

  115. 2026-04-30 21:53:31,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    116. 

  116. 2026-04-30 21:53:31,814 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    117. 

  117. 2026-04-30 21:53:32,865 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    118. 

  118. 2026-04-30 21:53:32,865 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    119. 

  119. 2026-04-30 21:53:32,865 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    120. 

  120. 2026-04-30 21:53:32,865 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 146}
    121. 

  121. 2026-04-30 21:53:32,866 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    122. 

  122. 2026-04-30 21:53:32,866 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    123. 

  123. 2026-04-30 21:53:32,866 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    124. 

  124. 2026-04-30 21:53:32,867 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    125. 

  125. 2026-04-30 21:53:32,867 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    126. 

  126. 2026-04-30 21:53:32,867 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    127. 

  127. 2026-04-30 21:53:32,868 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    128. 

  128. 2026-04-30 21:53:32,868 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    129. 

  129. 2026-04-30 21:53:32,868 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    130. 

  130. 2026-04-30 21:53:32,868 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    131. 

  131. 2026-04-30 21:53:32,869 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    132. 

  132. 2026-04-30 21:53:32,869 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    133. 

  133. 2026-04-30 21:53:32,869 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    134. 

  134. 2026-04-30 21:53:32,870 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -39dBm
    135. 

  135. 2026-04-30 21:53:32,870 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    136. 

  136. 2026-04-30 21:53:32,870 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    137. 

  137. 2026-04-30 21:53:32,871 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    138. 

  138. 2026-04-30 21:53:33,993 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    139. 

  139. 2026-04-30 21:53:33,994 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    140. 

  140. 2026-04-30 21:53:33,994 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    141. 

  141. 2026-04-30 21:53:33,994 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 146}
    142. 

  142. 2026-04-30 21:53:33,995 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    143. 

  143. 2026-04-30 21:53:33,995 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    144. 

  144. 2026-04-30 21:53:33,995 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    145. 

  145. 2026-04-30 21:53:33,995 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    146. 

  146. 2026-04-30 21:53:33,995 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    147. 

  147. 2026-04-30 21:53:33,996 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    148. 

  148. 2026-04-30 21:53:33,996 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    149. 

  149. 2026-04-30 21:53:33,996 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    150. 

  150. 2026-04-30 21:53:33,996 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    151. 

  151. 2026-04-30 21:53:33,997 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    152. 

  152. 2026-04-30 21:53:33,997 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    153. 

  153. 2026-04-30 21:53:33,997 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    154. 

  154. 2026-04-30 21:53:33,997 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    155. 

  155. 2026-04-30 21:53:33,997 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -39dBm
    156. 

  156. 2026-04-30 21:53:33,998 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    157. 

  157. 2026-04-30 21:53:33,998 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    158. 

  158. 2026-04-30 21:53:33,998 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    159. 

  159. 2026-04-30 21:53:35,076 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    160. 

  160. 2026-04-30 21:53:35,077 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    161. 

  161. 2026-04-30 21:53:35,077 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    162. 

  162. 2026-04-30 21:53:35,078 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 146}
    163. 

  163. 2026-04-30 21:53:35,079 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    164. 

  164. 2026-04-30 21:53:35,081 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    165. 

  165. 2026-04-30 21:53:35,081 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    166. 

  166. 2026-04-30 21:53:35,082 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    167. 

  167. 2026-04-30 21:53:35,083 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    168. 

  168. 2026-04-30 21:53:35,084 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    169. 

  169. 2026-04-30 21:53:35,085 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    170. 

  170. 2026-04-30 21:53:35,086 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    171. 

  171. 2026-04-30 21:53:35,087 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    172. 

  172. 2026-04-30 21:53:35,088 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    173. 

  173. 2026-04-30 21:53:35,089 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    174. 

  174. 2026-04-30 21:53:35,090 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    175. 

  175. 2026-04-30 21:53:35,091 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    176. 

  176. 2026-04-30 21:53:35,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -39dBm
    177. 

  177. 2026-04-30 21:53:35,093 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    178. 

  178. 2026-04-30 21:53:35,094 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    179. 

  179. 2026-04-30 21:53:35,095 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    180. 

  180. 2026-04-30 21:53:36,175 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    181. 

  181. 2026-04-30 21:53:36,176 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    182. 

  182. 2026-04-30 21:53:36,176 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    183. 

  183. 2026-04-30 21:53:36,177 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 146}
    184. 

  184. 2026-04-30 21:53:36,177 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    185. 

  185. 2026-04-30 21:53:36,178 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    186. 

  186. 2026-04-30 21:53:36,179 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x1001 -> extruder 0
    187. 

  187. 2026-04-30 21:53:36,179 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    188. 

  188. 2026-04-30 21:53:36,181 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    189. 

  189. 2026-04-30 21:53:36,182 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    190. 

  190. 2026-04-30 21:53:36,182 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    191. 

  191. 2026-04-30 21:53:36,183 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 26°C (heater OFF)
    192. 

  192. 2026-04-30 21:53:36,183 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    193. 

  193. 2026-04-30 21:53:36,184 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=26.0, heating=False, respect_local=False
    194. 

  194. 2026-04-30 21:53:36,185 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 26.0, target: 0.0, heating: False
    195. 

  195. 2026-04-30 21:53:36,185 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    196. 

  196. 2026-04-30 21:53:36,186 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    197. 

  197. 2026-04-30 21:53:36,187 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -39dBm
    198. 

  198. 2026-04-30 21:53:36,187 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    199. 

  199. 2026-04-30 21:53:36,188 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [2]
    200. 

  200. 2026-04-30 21:53:36,188 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: v2-reinforced-parallel-2-car-display-1-18_PETG_7h44m
    201.