Domovská stránka Prehľadávať Pomoc
Prihlásiť sa
yunoadmin
/
bambuddy
zrkadlo https://github.com/maziggy/bambuddy
1
0
Fork 0
Súbory Issues 0 Wiki
Strom: b69aad1fed
Branche Tagy
bambuddy
/
logs
/
4d876fc473b344a69d40cb33b30f9a78.log

4d876fc473b344a69d40cb33b30f9a78.log 34 KB
História Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-04-19 15:25:44,041 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    2. 

  2. 2026-04-19 15:25:44,041 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    3. 

  3. 2026-04-19 15:25:44,041 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    4. 

  4. 2026-04-19 15:25:44,042 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    5. 

  5. 2026-04-19 15:25:44,042 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    6. 

  6. 2026-04-19 15:25:44,042 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    7. 

  7. 2026-04-19 15:25:44,043 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    8. 

  8. 2026-04-19 15:25:44,044 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    9. 

  9. 2026-04-19 15:25:44,044 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    10. 

  10. 2026-04-19 15:25:44,044 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    11. 

  11. 2026-04-19 15:25:44,045 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    12. 

  12. 2026-04-19 15:25:44,045 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    13. 

  13. 2026-04-19 15:25:44,384 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    14. 

  14. 2026-04-19 15:25:45,224 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    15. 

  15. 2026-04-19 15:25:45,224 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    16. 

  16. 2026-04-19 15:25:45,224 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    17. 

  17. 2026-04-19 15:25:45,224 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    18. 

  18. 2026-04-19 15:25:45,225 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 617}
    19. 

  19. 2026-04-19 15:25:45,225 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    20. 

  20. 2026-04-19 15:25:45,226 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    21. 

  21. 2026-04-19 15:25:45,226 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    22. 

  22. 2026-04-19 15:25:45,226 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10001003 -> extruder 0
    23. 

  23. 2026-04-19 15:25:45,226 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0}
    24. 

  24. 2026-04-19 15:25:45,226 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    25. 

  25. 2026-04-19 15:25:45,227 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    26. 

  26. 2026-04-19 15:25:45,227 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    27. 

  27. 2026-04-19 15:25:45,227 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    28. 

  28. 2026-04-19 15:25:45,227 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    29. 

  29. 2026-04-19 15:25:45,228 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    30. 

  30. 2026-04-19 15:25:45,228 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    31. 

  31. 2026-04-19 15:25:45,228 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    32. 

  32. 2026-04-19 15:25:45,229 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    33. 

  33. 2026-04-19 15:25:45,229 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    34. 

  34. 2026-04-19 15:25:45,230 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    35. 

  35. 2026-04-19 15:25:45,230 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    36. 

  36. 2026-04-19 15:25:45,230 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    37. 

  37. 2026-04-19 15:25:46,349 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    38. 

  38. 2026-04-19 15:25:46,349 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    39. 

  39. 2026-04-19 15:25:46,350 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    40. 

  40. 2026-04-19 15:25:46,350 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    41. 

  41. 2026-04-19 15:25:46,350 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 617}
    42. 

  42. 2026-04-19 15:25:46,350 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    43. 

  43. 2026-04-19 15:25:46,350 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    44. 

  44. 2026-04-19 15:25:46,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    45. 

  45. 2026-04-19 15:25:46,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10001003 -> extruder 0
    46. 

  46. 2026-04-19 15:25:46,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0}
    47. 

  47. 2026-04-19 15:25:46,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    48. 

  48. 2026-04-19 15:25:46,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    49. 

  49. 2026-04-19 15:25:46,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    50. 

  50. 2026-04-19 15:25:46,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    51. 

  51. 2026-04-19 15:25:46,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    52. 

  52. 2026-04-19 15:25:46,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    53. 

  53. 2026-04-19 15:25:46,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    54. 

  54. 2026-04-19 15:25:46,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    55. 

  55. 2026-04-19 15:25:46,353 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    56. 

  56. 2026-04-19 15:25:46,353 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    57. 

  57. 2026-04-19 15:25:46,354 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    58. 

  58. 2026-04-19 15:25:46,354 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    59. 

  59. 2026-04-19 15:25:46,354 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    60. 

  60. 2026-04-19 15:25:46,425 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    61. 

  61. 2026-04-19 15:25:47,468 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    62. 

  62. 2026-04-19 15:25:47,468 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    63. 

  63. 2026-04-19 15:25:47,469 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    64. 

  64. 2026-04-19 15:25:47,469 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    65. 

  65. 2026-04-19 15:25:47,469 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 617}
    66. 

  66. 2026-04-19 15:25:47,470 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    67. 

  67. 2026-04-19 15:25:47,470 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    68. 

  68. 2026-04-19 15:25:47,471 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    69. 

  69. 2026-04-19 15:25:47,471 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10001003 -> extruder 0
    70. 

  70. 2026-04-19 15:25:47,471 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0}
    71. 

  71. 2026-04-19 15:25:47,472 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    72. 

  72. 2026-04-19 15:25:47,472 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    73. 

  73. 2026-04-19 15:25:47,473 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    74. 

  74. 2026-04-19 15:25:47,473 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    75. 

  75. 2026-04-19 15:25:47,473 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    76. 

  76. 2026-04-19 15:25:47,473 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    77. 

  77. 2026-04-19 15:25:47,474 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    78. 

  78. 2026-04-19 15:25:47,474 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    79. 

  79. 2026-04-19 15:25:47,475 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    80. 

  80. 2026-04-19 15:25:47,476 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    81. 

  81. 2026-04-19 15:25:47,477 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    82. 

  82. 2026-04-19 15:25:47,477 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    83. 

  83. 2026-04-19 15:25:47,478 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    84. 

  84. 2026-04-19 15:25:48,459 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    85. 

  85. 2026-04-19 15:25:48,579 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    86. 

  86. 2026-04-19 15:25:48,579 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    87. 

  87. 2026-04-19 15:25:48,580 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    88. 

  88. 2026-04-19 15:25:48,580 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    89. 

  89. 2026-04-19 15:25:48,580 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 617}
    90. 

  90. 2026-04-19 15:25:48,581 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    91. 

  91. 2026-04-19 15:25:48,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    92. 

  92. 2026-04-19 15:25:48,582 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    93. 

  93. 2026-04-19 15:25:48,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10001003 -> extruder 0
    94. 

  94. 2026-04-19 15:25:48,583 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0}
    95. 

  95. 2026-04-19 15:25:48,584 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    96. 

  96. 2026-04-19 15:25:48,584 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    97. 

  97. 2026-04-19 15:25:48,585 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    98. 

  98. 2026-04-19 15:25:48,585 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    99. 

  99. 2026-04-19 15:25:48,585 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    100. 

  100. 2026-04-19 15:25:48,586 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    101. 

  101. 2026-04-19 15:25:48,586 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    102. 

  102. 2026-04-19 15:25:48,587 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    103. 

  103. 2026-04-19 15:25:48,587 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    104. 

  104. 2026-04-19 15:25:48,588 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    105. 

  105. 2026-04-19 15:25:48,588 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    106. 

  106. 2026-04-19 15:25:48,589 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    107. 

  107. 2026-04-19 15:25:48,589 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    108. 

  108. 2026-04-19 15:25:49,827 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    109. 

  109. 2026-04-19 15:25:49,828 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    110. 

  110. 2026-04-19 15:25:49,828 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    111. 

  111. 2026-04-19 15:25:49,829 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    112. 

  112. 2026-04-19 15:25:49,829 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 617}
    113. 

  113. 2026-04-19 15:25:49,829 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    114. 

  114. 2026-04-19 15:25:49,830 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    115. 

  115. 2026-04-19 15:25:49,830 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    116. 

  116. 2026-04-19 15:25:49,831 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10001003 -> extruder 0
    117. 

  117. 2026-04-19 15:25:49,831 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0}
    118. 

  118. 2026-04-19 15:25:49,832 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    119. 

  119. 2026-04-19 15:25:49,832 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    120. 

  120. 2026-04-19 15:25:49,833 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    121. 

  121. 2026-04-19 15:25:49,833 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    122. 

  122. 2026-04-19 15:25:49,833 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    123. 

  123. 2026-04-19 15:25:49,834 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    124. 

  124. 2026-04-19 15:25:49,834 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    125. 

  125. 2026-04-19 15:25:49,835 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    126. 

  126. 2026-04-19 15:25:49,835 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    127. 

  127. 2026-04-19 15:25:49,836 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    128. 

  128. 2026-04-19 15:25:49,837 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    129. 

  129. 2026-04-19 15:25:49,837 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    130. 

  130. 2026-04-19 15:25:49,838 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    131. 

  131. 2026-04-19 15:25:51,007 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    132. 

  132. 2026-04-19 15:25:51,007 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    133. 

  133. 2026-04-19 15:25:51,008 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    134. 

  134. 2026-04-19 15:25:51,008 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    135. 

  135. 2026-04-19 15:25:51,009 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 617}
    136. 

  136. 2026-04-19 15:25:51,009 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    137. 

  137. 2026-04-19 15:25:51,010 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    138. 

  138. 2026-04-19 15:25:51,010 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    139. 

  139. 2026-04-19 15:25:51,010 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10001003 -> extruder 0
    140. 

  140. 2026-04-19 15:25:51,010 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0}
    141. 

  141. 2026-04-19 15:25:51,011 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    142. 

  142. 2026-04-19 15:25:51,011 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    143. 

  143. 2026-04-19 15:25:51,012 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    144. 

  144. 2026-04-19 15:25:51,012 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    145. 

  145. 2026-04-19 15:25:51,013 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    146. 

  146. 2026-04-19 15:25:51,013 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    147. 

  147. 2026-04-19 15:25:51,014 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    148. 

  148. 2026-04-19 15:25:51,014 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    149. 

  149. 2026-04-19 15:25:51,015 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    150. 

  150. 2026-04-19 15:25:51,015 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    151. 

  151. 2026-04-19 15:25:51,015 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    152. 

  152. 2026-04-19 15:25:51,016 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    153. 

  153. 2026-04-19 15:25:51,016 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    154. 

  154. 2026-04-19 15:25:52,196 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    155. 

  155. 2026-04-19 15:25:52,196 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    156. 

  156. 2026-04-19 15:25:52,197 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    157. 

  157. 2026-04-19 15:25:52,197 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    158. 

  158. 2026-04-19 15:25:52,197 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 617}
    159. 

  159. 2026-04-19 15:25:52,198 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    160. 

  160. 2026-04-19 15:25:52,198 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    161. 

  161. 2026-04-19 15:25:52,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    162. 

  162. 2026-04-19 15:25:52,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10001003 -> extruder 0
    163. 

  163. 2026-04-19 15:25:52,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0}
    164. 

  164. 2026-04-19 15:25:52,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    165. 

  165. 2026-04-19 15:25:52,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    166. 

  166. 2026-04-19 15:25:52,201 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    167. 

  167. 2026-04-19 15:25:52,201 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    168. 

  168. 2026-04-19 15:25:52,202 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    169. 

  169. 2026-04-19 15:25:52,202 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    170. 

  170. 2026-04-19 15:25:52,203 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    171. 

  171. 2026-04-19 15:25:52,204 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    172. 

  172. 2026-04-19 15:25:52,205 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    173. 

  173. 2026-04-19 15:25:52,205 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    174. 

  174. 2026-04-19 15:25:52,206 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    175. 

  175. 2026-04-19 15:25:52,206 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    176. 

  176. 2026-04-19 15:25:52,207 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    177. 

  177. 2026-04-19 15:25:52,522 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    178. 

  178. 2026-04-19 15:25:53,303 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    179. 

  179. 2026-04-19 15:25:53,304 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    180. 

  180. 2026-04-19 15:25:53,304 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    181. 

  181. 2026-04-19 15:25:53,304 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    182. 

  182. 2026-04-19 15:25:53,304 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_hall_out_bits': '0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 617}
    183. 

  183. 2026-04-19 15:25:53,305 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    184. 

  184. 2026-04-19 15:25:53,305 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    185. 

  185. 2026-04-19 15:25:53,305 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    186. 

  186. 2026-04-19 15:25:53,305 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10001003 -> extruder 0
    187. 

  187. 2026-04-19 15:25:53,305 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0}
    188. 

  188. 2026-04-19 15:25:53,306 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    189. 

  189. 2026-04-19 15:25:53,306 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    190. 

  190. 2026-04-19 15:25:53,306 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    191. 

  191. 2026-04-19 15:25:53,306 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 22°C (heater OFF)
    192. 

  192. 2026-04-19 15:25:53,306 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    193. 

  193. 2026-04-19 15:25:53,307 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=22.0, heating=False, respect_local=False
    194. 

  194. 2026-04-19 15:25:53,307 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 22.0, target: 0.0, heating: False
    195. 

  195. 2026-04-19 15:25:53,308 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 30587, 'ts_unix': '20260419010404'}]
    196. 

  196. 2026-04-19 15:25:53,308 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 0, 'tl_external_total_kb': 0, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    197. 

  197. 2026-04-19 15:25:53,308 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -67dBm
    198. 

  198. 2026-04-19 15:25:53,308 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    199. 

  199. 2026-04-19 15:25:53,309 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    200. 

  200. 2026-04-19 15:25:53,309 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    201.