Startseite Erkunden Hilfe
Anmelden
yunoadmin
/
bambuddy
Mirror von https://github.com/maziggy/bambuddy
1
0
Fork 0
Dateien Issues 0 Wiki
Struktur: a55c8ec0b6
Branches Tags
bambuddy
/
logs
/
b8ba475ae9d74fd7b57a5cf174a91e4d.log

b8ba475ae9d74fd7b57a5cf174a91e4d.log 33 KB
Verlauf Originalformat

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-06-02 10:41:42,274 WARNING [backend.app.api.routes.cloud] [3dad6bb4] Failed to get cloud preset GFS02 (API ID: GFS02): Failed to get setting detail: 400
    2. 

  2. 2026-06-02 10:41:42,276 INFO [uvicorn.access] [-] [IP]:63158 - "POST /api/v1/cloud/filament-info HTTP/1.1" 200
    3. 

  3. 2026-06-02 10:41:42,296 WARNING [backend.app.api.routes.cloud] [4689f513] Failed to get cloud preset GFS00 (API ID: GFS00): Failed to get setting detail: 400
    4. 

  4. 2026-06-02 10:41:42,298 INFO [uvicorn.access] [-] [IP]:63156 - "POST /api/v1/cloud/filament-info HTTP/1.1" 200
    5. 

  5. 2026-06-02 10:43:23,008 INFO [backend.app.main] [-] [Printer 1] Broadcasting AMS change via WebSocket
    6. 

  6. 2026-06-02 10:43:37,108 INFO [backend.app.main] [-] [Printer 2] Broadcasting AMS change via WebSocket
    7. 

  7. 2026-06-02 10:44:23,369 INFO [backend.app.main] [-] Recorded 4 AMS sensor history entries
    8. 

  8. 2026-06-02 10:46:08,890 INFO [backend.app.main] [-] [Printer 1] Broadcasting AMS change via WebSocket
    9. 

  9. 2026-06-02 10:47:04,308 INFO [backend.app.main] [-] [Printer 2] Broadcasting AMS change via WebSocket
    10. 

  10. 2026-06-02 10:47:24,216 INFO [backend.app.api.routes.cloud] [54abc4b7] get_filament_info called with 3 IDs: ['GFA00', 'GFA01', 'GFS02']
    11. 

  11. 2026-06-02 10:47:24,259 INFO [backend.app.api.routes.cloud] [f720d8ca] get_filament_info called with 3 IDs: ['GFA00', 'GFA01', 'GFS00']
    12. 

  12. 2026-06-02 10:47:24,828 WARNING [backend.app.api.routes.cloud] [54abc4b7] Failed to get cloud preset GFS02 (API ID: GFS02): Failed to get setting detail: 400
    13. 

  13. 2026-06-02 10:47:24,829 INFO [uvicorn.access] [-] [IP]:55755 - "POST /api/v1/cloud/filament-info HTTP/1.1" 200
    14. 

  14. 2026-06-02 10:47:24,853 WARNING [backend.app.api.routes.cloud] [f720d8ca] Failed to get cloud preset GFS00 (API ID: GFS00): Failed to get setting detail: 400
    15. 

  15. 2026-06-02 10:47:24,854 INFO [uvicorn.access] [-] [IP]:55758 - "POST /api/v1/cloud/filament-info HTTP/1.1" 200
    16. 

  16. 2026-06-02 10:47:40,647 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 2
    17. 

  17. 2026-06-02 10:47:40,648 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    18. 

  18. 2026-06-02 10:47:41,792 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 129636 bytes
    19. 

  19. 2026-06-02 10:47:41,792 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 129636 bytes
    20. 

  20. 2026-06-02 10:49:02,547 INFO [backend.app.services.virtual_printer.certificate] [1ecbdb7b] Using existing CA certificate (expires in 7281 days)
    21. 

  21. 2026-06-02 10:49:15,833 INFO [backend.app.api.routes.printers] [a644d30f] Cover: resolved plate 8 before download (subtask=SPECIALSTL COMPLETE_plate_8)
    22. 

  22. 2026-06-02 10:49:15,834 INFO [backend.app.api.routes.printers] [f1d5517c] Cover: resolved plate 2 before download (subtask=SPECIALSTL COMPLETE_plate_2)
    23. 

  23. 2026-06-02 10:49:23,184 INFO [backend.app.main] [-] [Printer 1] Broadcasting AMS change via WebSocket
    24. 

  24. 2026-06-02 10:49:23,372 INFO [backend.app.main] [-] Recorded 4 AMS sensor history entries
    25. 

  25. 2026-06-02 10:50:03,065 INFO [backend.app.main] [-] [Printer 2] Broadcasting AMS change via WebSocket
    26. 

  26. 2026-06-02 10:51:29,902 INFO [backend.app.api.routes.support] [8ba41255] Log level changed to DEBUG
    27. 

  27. 2026-06-02 10:51:29,902 INFO [backend.app.api.routes.bug_report] [8ba41255] Bug report: enabled debug logging
    28. 

  28. 2026-06-02 10:51:29,902 DEBUG [backend.app.services.bambu_mqtt] [8ba41255] [[SERIAL]] Requesting status update (pushall)
    29. 

  29. 2026-06-02 10:51:29,902 DEBUG [backend.app.services.bambu_mqtt] [8ba41255] [[SERIAL]] Requesting status update (pushall)
    30. 

  30. 2026-06-02 10:51:29,902 INFO [uvicorn.access] [-] [IP]:58740 - "POST /api/v1/bug-report/start-logging HTTP/1.1" 200
    31. 

  31. 2026-06-02 10:51:30,098 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    32. 

  32. 2026-06-02 10:51:30,098 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    33. 

  33. 2026-06-02 10:51:30,098 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_8.gcode, subtask_name: SPECIALSTL COMPLETE_plate_8
    34. 

  34. 2026-06-02 10:51:30,098 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '8f', 'tray_is_bbl_bits': '8f', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '8f', 'tray_reading_bits': '0', 'tray_tar': '0', 'version': 3875}
    35. 

  35. 2026-06-02 10:51:30,098 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 0
    36. 

  36. 2026-06-02 10:51:30,098 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    37. 

  37. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    38. 

  38. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    39. 

  39. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    40. 

  40. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    41. 

  41. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    42. 

  42. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    43. 

  43. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    44. 

  44. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    45. 

  45. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    46. 

  46. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    47. 

  47. 2026-06-02 10:51:30,099 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_8.gcode, subtask: SPECIALSTL COMPLETE_plate_8
    48. 

  48. 2026-06-02 10:51:30,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    49. 

  49. 2026-06-02 10:51:30,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    50. 

  50. 2026-06-02 10:51:30,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: SPECIALSTL COMPLETE_plate_2
    51. 

  51. 2026-06-02 10:51:30,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'fb', 'tray_is_bbl_bits': 'fb', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'fb', 'tray_reading_bits': '0', 'tray_tar': '3', 'version': 1311}
    52. 

  52. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 3
    53. 

  53. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    54. 

  54. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    55. 

  55. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    56. 

  56. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    57. 

  57. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    58. 

  58. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    59. 

  59. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    60. 

  60. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    61. 

  61. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    62. 

  62. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -51dBm
    63. 

  63. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    64. 

  64. 2026-06-02 10:51:30,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_2.gcode, subtask: SPECIALSTL COMPLETE_plate_2
    65. 

  65. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    66. 

  66. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    67. 

  67. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_8.gcode, subtask_name: SPECIALSTL COMPLETE_plate_8
    68. 

  68. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '8f', 'tray_is_bbl_bits': '8f', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '8f', 'tray_reading_bits': '0', 'tray_tar': '0', 'version': 3875}
    69. 

  69. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 0
    70. 

  70. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    71. 

  71. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    72. 

  72. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    73. 

  73. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    74. 

  74. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    75. 

  75. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    76. 

  76. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    77. 

  77. 2026-06-02 10:51:31,111 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    78. 

  78. 2026-06-02 10:51:31,112 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    79. 

  79. 2026-06-02 10:51:31,112 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    80. 

  80. 2026-06-02 10:51:31,112 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    81. 

  81. 2026-06-02 10:51:31,112 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_8.gcode, subtask: SPECIALSTL COMPLETE_plate_8
    82. 

  82. 2026-06-02 10:51:31,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    83. 

  83. 2026-06-02 10:51:31,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    84. 

  84. 2026-06-02 10:51:31,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: SPECIALSTL COMPLETE_plate_2
    85. 

  85. 2026-06-02 10:51:31,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'fb', 'tray_is_bbl_bits': 'fb', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'fb', 'tray_reading_bits': '0', 'tray_tar': '3', 'version': 1311}
    86. 

  86. 2026-06-02 10:51:31,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 3
    87. 

  87. 2026-06-02 10:51:31,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    88. 

  88. 2026-06-02 10:51:31,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    89. 

  89. 2026-06-02 10:51:31,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    90. 

  90. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    91. 

  91. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    92. 

  92. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    93. 

  93. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    94. 

  94. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    95. 

  95. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    96. 

  96. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -51dBm
    97. 

  97. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    98. 

  98. 2026-06-02 10:51:31,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_2.gcode, subtask: SPECIALSTL COMPLETE_plate_2
    99. 

  99. 2026-06-02 10:51:32,122 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    100. 

  100. 2026-06-02 10:51:32,122 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    101. 

  101. 2026-06-02 10:51:32,122 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_8.gcode, subtask_name: SPECIALSTL COMPLETE_plate_8
    102. 

  102. 2026-06-02 10:51:32,122 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '8f', 'tray_is_bbl_bits': '8f', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '8f', 'tray_reading_bits': '0', 'tray_tar': '0', 'version': 3875}
    103. 

  103. 2026-06-02 10:51:32,122 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 0
    104. 

  104. 2026-06-02 10:51:32,122 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    105. 

  105. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    106. 

  106. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    107. 

  107. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    108. 

  108. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    109. 

  109. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    110. 

  110. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    111. 

  111. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    112. 

  112. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    113. 

  113. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    114. 

  114. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    115. 

  115. 2026-06-02 10:51:32,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_8.gcode, subtask: SPECIALSTL COMPLETE_plate_8
    116. 

  116. 2026-06-02 10:51:32,796 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    117. 

  117. 2026-06-02 10:51:32,796 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    118. 

  118. 2026-06-02 10:51:32,796 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: SPECIALSTL COMPLETE_plate_2
    119. 

  119. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'fb', 'tray_is_bbl_bits': 'fb', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'fb', 'tray_reading_bits': '0', 'tray_tar': '3', 'version': 1311}
    120. 

  120. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 3
    121. 

  121. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    122. 

  122. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    123. 

  123. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    124. 

  124. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    125. 

  125. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    126. 

  126. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    127. 

  127. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    128. 

  128. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    129. 

  129. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    130. 

  130. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -51dBm
    131. 

  131. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    132. 

  132. 2026-06-02 10:51:32,797 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_2.gcode, subtask: SPECIALSTL COMPLETE_plate_2
    133. 

  133. 2026-06-02 10:51:33,143 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    134. 

  134. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    135. 

  135. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_8.gcode, subtask_name: SPECIALSTL COMPLETE_plate_8
    136. 

  136. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '8f', 'tray_is_bbl_bits': '8f', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '8f', 'tray_reading_bits': '0', 'tray_tar': '0', 'version': 3875}
    137. 

  137. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 0
    138. 

  138. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    139. 

  139. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    140. 

  140. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    141. 

  141. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    142. 

  142. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    143. 

  143. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    144. 

  144. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    145. 

  145. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    146. 

  146. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    147. 

  147. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    148. 

  148. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    149. 

  149. 2026-06-02 10:51:33,144 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_8.gcode, subtask: SPECIALSTL COMPLETE_plate_8
    150. 

  150. 2026-06-02 10:51:33,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    151. 

  151. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    152. 

  152. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: SPECIALSTL COMPLETE_plate_2
    153. 

  153. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'fb', 'tray_is_bbl_bits': 'fb', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'fb', 'tray_reading_bits': '0', 'tray_tar': '3', 'version': 1311}
    154. 

  154. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 3
    155. 

  155. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    156. 

  156. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    157. 

  157. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    158. 

  158. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    159. 

  159. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    160. 

  160. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    161. 

  161. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    162. 

  162. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    163. 

  163. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    164. 

  164. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -51dBm
    165. 

  165. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    166. 

  166. 2026-06-02 10:51:33,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_2.gcode, subtask: SPECIALSTL COMPLETE_plate_2
    167. 

  167. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    168. 

  168. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    169. 

  169. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_8.gcode, subtask_name: SPECIALSTL COMPLETE_plate_8
    170. 

  170. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '8f', 'tray_is_bbl_bits': '8f', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '8f', 'tray_reading_bits': '0', 'tray_tar': '0', 'version': 3875}
    171. 

  171. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 0
    172. 

  172. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    173. 

  173. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    174. 

  174. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    175. 

  175. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    176. 

  176. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    177. 

  177. 2026-06-02 10:51:34,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    178. 

  178. 2026-06-02 10:51:34,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    179. 

  179. 2026-06-02 10:51:34,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    180. 

  180. 2026-06-02 10:51:34,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    181. 

  181. 2026-06-02 10:51:34,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    182. 

  182. 2026-06-02 10:51:34,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    183. 

  183. 2026-06-02 10:51:34,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_8.gcode, subtask: SPECIALSTL COMPLETE_plate_8
    184. 

  184. 2026-06-02 10:51:34,811 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    185. 

  185. 2026-06-02 10:51:34,811 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    186. 

  186. 2026-06-02 10:51:34,811 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_2.gcode, subtask_name: SPECIALSTL COMPLETE_plate_2
    187. 

  187. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '3', 'ams_exist_bits_raw': '3', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'fb', 'tray_is_bbl_bits': 'fb', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'fb', 'tray_reading_bits': '0', 'tray_tar': '3', 'version': 1311}
    188. 

  188. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 3
    189. 

  189. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    190. 

  190. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    191. 

  191. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    192. 

  192. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 41.0
    193. 

  193. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 41.0°C (heater OFF)
    194. 

  194. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=41.0, heating=False, respect_local=False
    195. 

  195. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 41.0, target: 0.0, heating: False
    196. 

  196. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    197. 

  197. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    198. 

  198. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -51dBm
    199. 

  199. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    200. 

  200. 2026-06-02 10:51:34,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_2.gcode, subtask: SPECIALSTL COMPLETE_plate_2
    201.