yunoadmin
/
bambuddy
kopia lustrzana https://github.com/maziggy/bambuddy


			
							12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600
							import asyncio
import logging
from contextlib import asynccontextmanager
from datetime import UTC, datetime, timedelta
from logging.handlers import RotatingFileHandler


# =============================================================================
# Dependency Check - runs before other imports to give helpful error messages
# =============================================================================
def _start_error_server(missing_packages: list):
    """Start a minimal HTTP server to display dependency errors in browser."""
    import os
    import signal
    from http.server import BaseHTTPRequestHandler, HTTPServer

    packages_html = "".join(f"<li><code>{p}</code></li>" for p in missing_packages)

    html = f"""<!DOCTYPE html>
<html>
<head>
    <title>Bambuddy - Setup Required</title>
    <style>
        body {{
            font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif;
            background: #0f172a; color: #e2e8f0;
            display: flex; justify-content: center; align-items: center;
            min-height: 100vh; margin: 0; padding: 20px; box-sizing: border-box;
        }}
        .container {{
            background: #1e293b; border-radius: 12px; padding: 40px;
            max-width: 600px; text-align: center; box-shadow: 0 4px 20px rgba(0,0,0,0.3);
        }}
        h1 {{ color: #f87171; margin-bottom: 10px; }}
        h2 {{ color: #94a3b8; font-weight: normal; margin-top: 0; }}
        .packages {{
            background: #0f172a; border-radius: 8px; padding: 20px;
            margin: 20px 0; text-align: left;
        }}
        .packages ul {{ margin: 0; padding-left: 20px; }}
        .packages li {{ color: #fbbf24; margin: 8px 0; }}
        .command {{
            background: #0f172a; border-radius: 8px; padding: 15px 20px;
            margin: 15px 0; font-family: monospace; color: #4ade80;
            text-align: left; overflow-x: auto;
        }}
        .note {{ color: #94a3b8; font-size: 14px; margin-top: 20px; }}
    </style>
</head>
<body>
    <div class="container">
        <h1>Setup Required</h1>
        <h2>Missing Python packages</h2>
        <div class="packages"><ul>{packages_html}</ul></div>
        <p>To fix, run this command on your server:</p>
        <div class="command">pip install -r requirements.txt</div>
        <p>Or if using a virtual environment:</p>
        <div class="command">./venv/bin/pip install -r requirements.txt</div>
        <p class="note">After installing, restart Bambuddy:<br>
        <code>sudo systemctl restart bambuddy</code></p>
    </div>
</body>
</html>"""

    class ErrorHandler(BaseHTTPRequestHandler):
        def do_GET(self):
            self.send_response(503)
            self.send_header("Content-type", "text/html")
            self.end_headers()
            self.wfile.write(html.encode())

        def log_message(self, format, *args):
            print(f"[Error Server] {args[0]}")

    port = int(os.environ.get("PORT", 8000))
    print(f"\nStarting error server on http://0.0.0.0:{port}")
    print("Visit this URL in your browser to see the error details.\n")

    server = HTTPServer(("0.0.0.0", port), ErrorHandler)

    def shutdown(signum, frame):
        print("\nShutting down error server...")
        raise SystemExit(0)

    signal.signal(signal.SIGTERM, shutdown)
    signal.signal(signal.SIGINT, shutdown)

    server.serve_forever()


def check_dependencies():
    """Check that all required packages are installed."""
    missing = []

    # Map of import name -> package name (for pip install)
    required = {
        "jwt": "PyJWT",
        "fastapi": "fastapi",
        "uvicorn": "uvicorn",
        "sqlalchemy": "sqlalchemy",
        "aiosqlite": "aiosqlite",
        "pydantic": "pydantic",
        "paho.mqtt": "paho-mqtt",
    }

    for module, package in required.items():
        try:
            __import__(module)
        except ImportError:
            missing.append(package)

    if missing:
        print("\n" + "=" * 60)
        print("ERROR: Missing required Python packages!")
        print("=" * 60)
        print(f"\nMissing packages: {', '.join(missing)}")
        print("\nTo fix, run:")
        print("  pip install -r requirements.txt")
        print("\nOr if using a virtual environment:")
        print("  ./venv/bin/pip install -r requirements.txt")
        print("=" * 60 + "\n")
        _start_error_server(missing)


check_dependencies()
# =============================================================================

from fastapi import FastAPI

# Import settings first for logging configuration
from backend.app.core.config import APP_VERSION, settings as app_settings

# Configure logging based on settings
# DEBUG=true -> DEBUG level, else use LOG_LEVEL setting
log_level_str = "DEBUG" if app_settings.debug else app_settings.log_level.upper()
log_level = getattr(logging, log_level_str, logging.INFO)
log_format = "%(asctime)s %(levelname)s [%(name)s] %(message)s"

# Create root logger
root_logger = logging.getLogger()
root_logger.setLevel(log_level)

# Console handler - always enabled
console_handler = logging.StreamHandler()
console_handler.setLevel(log_level)
console_handler.setFormatter(logging.Formatter(log_format))
root_logger.addHandler(console_handler)

# File handler - only in production or if explicitly enabled
if app_settings.log_to_file:
    log_file = app_settings.log_dir / "bambuddy.log"
    file_handler = RotatingFileHandler(
        log_file,
        maxBytes=5 * 1024 * 1024,  # 5MB
        backupCount=3,
        encoding="utf-8",
    )
    file_handler.setLevel(log_level)
    file_handler.setFormatter(logging.Formatter(log_format))
    root_logger.addHandler(file_handler)
    logging.info(f"Logging to file: {log_file}")

# Reduce noise from third-party libraries in production
if not app_settings.debug:
    logging.getLogger("sqlalchemy.engine").setLevel(logging.WARNING)
    logging.getLogger("httpcore").setLevel(logging.WARNING)
    logging.getLogger("httpx").setLevel(logging.WARNING)

logging.info(f"Bambuddy starting - debug={app_settings.debug}, log_level={log_level_str}")
from fastapi.responses import FileResponse
from fastapi.staticfiles import StaticFiles
from sqlalchemy import delete, or_, select

from backend.app.api.routes import (
    ams_history,
    api_keys,
    archives,
    auth,
    camera,
    cloud,
    discovery,
    external_links,
    filaments,
    firmware,
    github_backup,
    groups,
    kprofiles,
    library,
    maintenance,
    metrics,
    notification_templates,
    notifications,
    pending_uploads,
    print_queue,
    printers,
    projects,
    settings as settings_routes,
    smart_plugs,
    spoolman,
    support,
    system,
    updates,
    users,
    webhook,
    websocket,
)
from backend.app.api.routes.maintenance import _get_printer_maintenance_internal, ensure_default_types
from backend.app.api.routes.support import init_debug_logging
from backend.app.core.database import async_session, init_db
from backend.app.core.websocket import ws_manager
from backend.app.models.smart_plug import SmartPlug
from backend.app.services.archive import ArchiveService
from backend.app.services.bambu_ftp import download_file_async, get_ftp_retry_settings, with_ftp_retry
from backend.app.services.bambu_mqtt import PrinterState
from backend.app.services.github_backup import github_backup_service
from backend.app.services.homeassistant import homeassistant_service
from backend.app.services.mqtt_relay import mqtt_relay
from backend.app.services.notification_service import notification_service
from backend.app.services.print_scheduler import scheduler as print_scheduler
from backend.app.services.printer_manager import (
    init_printer_connections,
    printer_manager,
    printer_state_to_dict,
)
from backend.app.services.smart_plug_manager import smart_plug_manager
from backend.app.services.spoolman import close_spoolman_client, get_spoolman_client, init_spoolman_client
from backend.app.services.tasmota import tasmota_service

# Track active prints: {(printer_id, filename): archive_id}
_active_prints: dict[tuple[int, str], int] = {}

# Track expected prints from reprint/scheduled (skip auto-archiving for these)
# {(printer_id, filename): archive_id}
_expected_prints: dict[tuple[int, str], int] = {}

# Track starting energy for prints: {archive_id: starting_kwh}
_print_energy_start: dict[int, float] = {}

# Track reprints to add costs on completion: {archive_id}
_reprint_archives: set[int] = set()

# Track progress milestones for notifications: {printer_id: last_milestone_notified}
# Milestones are 25, 50, 75. Value of 0 means no milestone notified yet for current print.
_last_progress_milestone: dict[int, int] = {}

# Track HMS errors that have been notified: {printer_id: set of error codes}
# This prevents sending duplicate notifications for the same error
_notified_hms_errors: dict[int, set[str]] = {}


async def _get_plug_energy(plug, db) -> dict | None:
    """Get energy from plug regardless of type (Tasmota or Home Assistant).

    For HA plugs, configures the service with current settings from DB.
    """
    if plug.plug_type == "homeassistant":
        from backend.app.api.routes.settings import get_setting

        ha_url = await get_setting(db, "ha_url") or ""
        ha_token = await get_setting(db, "ha_token") or ""
        homeassistant_service.configure(ha_url, ha_token)
        return await homeassistant_service.get_energy(plug)
    else:
        return await tasmota_service.get_energy(plug)


def register_expected_print(printer_id: int, filename: str, archive_id: int):
    """Register an expected print from reprint/scheduled so we don't create duplicate archives."""
    # Store with multiple filename variations to catch different naming patterns
    _expected_prints[(printer_id, filename)] = archive_id
    # Also store without .3mf extension if present
    if filename.endswith(".3mf"):
        base = filename[:-4]
        _expected_prints[(printer_id, base)] = archive_id
        _expected_prints[(printer_id, f"{base}.gcode")] = archive_id
    logging.getLogger(__name__).info(
        f"Registered expected print: printer={printer_id}, file={filename}, archive={archive_id}"
    )


_last_status_broadcast: dict[int, str] = {}
_nozzle_count_updated: set[int] = set()  # Track printers where we've updated nozzle_count


async def _report_spoolman_usage(printer_id: int, archive_id: int, logger):
    """Report filament usage to Spoolman after print completion.

    This finds the spool by RFID tag_uid from current AMS state and reports
    the filament_used_grams from the archive metadata.
    """
    async with async_session() as db:
        from backend.app.api.routes.settings import get_setting
        from backend.app.models.archive import PrintArchive

        # Check if Spoolman is enabled
        spoolman_enabled = await get_setting(db, "spoolman_enabled")
        if not spoolman_enabled or spoolman_enabled.lower() != "true":
            return

        # Get Spoolman URL
        spoolman_url = await get_setting(db, "spoolman_url")
        if not spoolman_url:
            return

        # Get or create Spoolman client
        client = await get_spoolman_client()
        if not client:
            client = await init_spoolman_client(spoolman_url)

        # Check if Spoolman is reachable
        if not await client.health_check():
            logger.warning("Spoolman not reachable for usage reporting")
            return

        # Get archive to find filament usage
        result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
        archive = result.scalar_one_or_none()
        if not archive or not archive.filament_used_grams:
            logger.debug(f"No filament usage data for archive {archive_id}")
            return

        filament_used = archive.filament_used_grams
        logger.info(f"[SPOOLMAN] Archive {archive_id} used {filament_used}g of filament")

        # Get current AMS state from printer to find the active spool
        state = printer_manager.get_status(printer_id)
        if not state or not state.raw_data:
            logger.debug("No printer state available for usage reporting")
            return

        ams_data = state.raw_data.get("ams")
        if not ams_data:
            logger.debug("No AMS data available for usage reporting")
            return

        # Find spools with RFID tags in Spoolman and report usage
        # For now, we report usage to the first spool found with a matching tag
        # TODO: In future, track which specific trays were used during the print
        spools_updated = 0
        for ams_unit in ams_data:
            trays = ams_unit.get("tray", [])

            for tray_data in trays:
                tag_uid = tray_data.get("tag_uid")
                if not tag_uid:
                    continue

                # Find spool in Spoolman by tag
                spool = await client.find_spool_by_tag(tag_uid)
                if spool:
                    # Report usage to Spoolman
                    result = await client.use_spool(spool["id"], filament_used)
                    if result:
                        logger.info(
                            f"[SPOOLMAN] Reported {filament_used}g usage to spool {spool['id']} (tag: {tag_uid})"
                        )
                        spools_updated += 1
                        # Only report to one spool for single-material prints
                        # Multi-material prints would need more sophisticated tracking
                        return

        if spools_updated == 0:
            logger.debug(f"No matching Spoolman spools found for printer {printer_id}")


async def on_printer_status_change(printer_id: int, state: PrinterState):
    """Handle printer status changes - broadcast via WebSocket."""
    # Only broadcast if something meaningful changed (reduce WebSocket spam)
    # Include rounded temperatures to detect meaningful temp changes (within 1 degree)
    temps = state.temperatures or {}
    nozzle_temp = round(temps.get("nozzle", 0))
    bed_temp = round(temps.get("bed", 0))
    nozzle_2_temp = round(temps.get("nozzle_2", 0)) if "nozzle_2" in temps else ""
    chamber_temp = round(temps.get("chamber", 0)) if "chamber" in temps else ""

    # Auto-detect dual-nozzle printers from MQTT temperature data
    if "nozzle_2" in temps and printer_id not in _nozzle_count_updated:
        _nozzle_count_updated.add(printer_id)
        # Update nozzle_count in database
        async with async_session() as db:
            from backend.app.models.printer import Printer

            result = await db.execute(select(Printer).where(Printer.id == printer_id))
            printer = result.scalar_one_or_none()
            if printer and printer.nozzle_count != 2:
                printer.nozzle_count = 2
                await db.commit()
                logging.getLogger(__name__).info(
                    f"Auto-detected dual-nozzle printer {printer_id}, updated nozzle_count=2"
                )

    # Include target temps for heating phase detection
    bed_target = round(temps.get("bed_target", 0))
    nozzle_target = round(temps.get("nozzle_target", 0))

    status_key = (
        f"{state.connected}:{state.state}:{state.progress}:{state.layer_num}:"
        f"{nozzle_temp}:{bed_temp}:{nozzle_2_temp}:{chamber_temp}:"
        f"{state.stg_cur}:{bed_target}:{nozzle_target}:"
        f"{state.cooling_fan_speed}:{state.big_fan1_speed}:{state.big_fan2_speed}:"
        f"{state.chamber_light}:{state.active_extruder}"
    )

    # MQTT relay - publish status (before dedup check - always publish to MQTT)
    try:
        printer_info = printer_manager.get_printer(printer_id)
        if printer_info:
            await mqtt_relay.on_printer_status(printer_id, state, printer_info.name, printer_info.serial_number)
    except Exception:
        pass  # Don't fail status callback if MQTT fails

    if _last_status_broadcast.get(printer_id) == status_key:
        return  # No change, skip WebSocket broadcast

    _last_status_broadcast[printer_id] = status_key

    # Check for progress milestone notifications (25%, 50%, 75%)
    progress = state.progress or 0
    is_printing = state.state in ("RUNNING", "PRINTING")

    if is_printing and progress > 0:
        # Determine which milestone we've reached
        current_milestone = 0
        if progress >= 75:
            current_milestone = 75
        elif progress >= 50:
            current_milestone = 50
        elif progress >= 25:
            current_milestone = 25

        last_milestone = _last_progress_milestone.get(printer_id, 0)

        # If we've crossed a new milestone, send notification
        if current_milestone > last_milestone:
            _last_progress_milestone[printer_id] = current_milestone
            try:
                async with async_session() as db:
                    from backend.app.models.printer import Printer

                    result = await db.execute(select(Printer).where(Printer.id == printer_id))
                    printer = result.scalar_one_or_none()
                    printer_name = printer.name if printer else f"Printer {printer_id}"
                    filename = state.subtask_name or state.gcode_file or "Unknown"
                    # remaining_time is in minutes, convert to seconds for notification
                    remaining_time_seconds = state.remaining_time * 60 if state.remaining_time else None

                    await notification_service.on_print_progress(
                        printer_id, printer_name, filename, current_milestone, db, remaining_time_seconds
                    )
            except Exception as e:
                logging.getLogger(__name__).warning(f"Progress milestone notification failed: {e}")
    elif progress < 5:
        # Reset milestone tracking when print restarts or new print begins
        _last_progress_milestone[printer_id] = 0

    # Check for new HMS errors and send notifications
    current_hms_errors = getattr(state, "hms_errors", []) or []
    if current_hms_errors:
        # Build set of current error codes (using attr for uniqueness)
        current_error_codes = {f"{e.attr:08x}" for e in current_hms_errors}
        previously_notified = _notified_hms_errors.get(printer_id, set())

        # Find new errors that haven't been notified yet
        new_error_codes = current_error_codes - previously_notified

        if new_error_codes:
            # Get the actual new errors for the notification
            new_errors = [e for e in current_hms_errors if f"{e.attr:08x}" in new_error_codes]

            try:
                async with async_session() as db:
                    from backend.app.models.printer import Printer

                    result = await db.execute(select(Printer).where(Printer.id == printer_id))
                    printer = result.scalar_one_or_none()
                    printer_name = printer.name if printer else f"Printer {printer_id}"

                    # Format error details for notification
                    # Module 0x07 = AMS/Filament, 0x05 = Nozzle, 0x0C = Motion Controller, etc.
                    module_names = {
                        0x03: "Print/Task",
                        0x05: "Nozzle/Extruder",
                        0x07: "AMS/Filament",
                        0x0C: "Motion Controller",
                        0x12: "Chamber",
                    }

                    from backend.app.services.hms_errors import get_error_description

                    for error in new_errors:
                        module_name = module_names.get(error.module, f"Module 0x{error.module:02X}")
                        # Build short code like "0700_8010"
                        error_code_int = int(error.code.replace("0x", ""), 16) if error.code else 0
                        short_code = f"{(error.attr >> 16) & 0xFFFF:04X}_{error_code_int:04X}"

                        error_type = f"{module_name} Error"
                        # Look up human-readable description
                        description = get_error_description(short_code)
                        error_detail = description if description else f"Error code: {short_code}"

                        await notification_service.on_printer_error(
                            printer_id, printer_name, error_type, db, error_detail
                        )

                    logging.getLogger(__name__).info(
                        f"[HMS] Sent notification for {len(new_errors)} new error(s) on printer {printer_id}"
                    )

                    # Also publish to MQTT relay
                    printer_info = printer_manager.get_printer(printer_id)
                    if printer_info:
                        errors_data = [
                            {
                                "code": e.code,
                                "attr": e.attr,
                                "module": e.module,
                                "severity": e.severity,
                            }
                            for e in new_errors
                        ]
                        await mqtt_relay.on_printer_error(
                            printer_id, printer_info.name, printer_info.serial_number, errors_data
                        )

            except Exception as e:
                logging.getLogger(__name__).warning(f"HMS error notification failed: {e}")

            # Update tracking with all current errors
            _notified_hms_errors[printer_id] = current_error_codes
    else:
        # No HMS errors - clear tracking so future errors get notified
        if printer_id in _notified_hms_errors:
            _notified_hms_errors.pop(printer_id, None)

    await ws_manager.send_printer_status(
        printer_id,
        printer_state_to_dict(state, printer_id, printer_manager.get_model(printer_id)),
    )


async def on_ams_change(printer_id: int, ams_data: list):
    """Handle AMS data changes - sync to Spoolman if enabled and auto mode."""
    import logging

    logger = logging.getLogger(__name__)

    # MQTT relay - publish AMS change
    try:
        printer_info = printer_manager.get_printer(printer_id)
        if printer_info:
            await mqtt_relay.on_ams_change(printer_id, printer_info.name, printer_info.serial_number, ams_data)
    except Exception:
        pass  # Don't fail AMS callback if MQTT fails

    # Broadcast AMS change via WebSocket (bypasses status_key deduplication)
    # This ensures frontend gets immediate updates when AMS slots are configured
    try:
        state = printer_manager.get_status(printer_id)
        if state:
            logger.info(f"[Printer {printer_id}] Broadcasting AMS change via WebSocket")
            await ws_manager.send_printer_status(
                printer_id,
                printer_state_to_dict(state, printer_id, printer_manager.get_model(printer_id)),
            )
    except Exception as e:
        logger.warning(f"Failed to broadcast AMS change for printer {printer_id}: {e}")

    try:
        async with async_session() as db:
            from backend.app.api.routes.settings import get_setting
            from backend.app.models.printer import Printer

            # Check if Spoolman is enabled
            spoolman_enabled = await get_setting(db, "spoolman_enabled")
            if not spoolman_enabled or spoolman_enabled.lower() != "true":
                return

            # Check sync mode
            sync_mode = await get_setting(db, "spoolman_sync_mode")
            if sync_mode and sync_mode != "auto":
                return  # Only sync on auto mode

            # Get Spoolman URL
            spoolman_url = await get_setting(db, "spoolman_url")
            if not spoolman_url:
                return

            # Get or create Spoolman client
            client = await get_spoolman_client()
            if not client:
                client = await init_spoolman_client(spoolman_url)

            # Check if Spoolman is reachable
            if not await client.health_check():
                logger.warning(f"Spoolman not reachable at {spoolman_url}")
                return

            # Get printer name for location
            result = await db.execute(select(Printer).where(Printer.id == printer_id))
            printer = result.scalar_one_or_none()
            printer_name = printer.name if printer else f"Printer {printer_id}"

            # Sync each AMS tray
            synced = 0
            for ams_unit in ams_data:
                ams_id = int(ams_unit.get("id", 0))
                trays = ams_unit.get("tray", [])

                for tray_data in trays:
                    tray = client.parse_ams_tray(ams_id, tray_data)
                    if not tray:
                        continue  # Empty tray

                    try:
                        result = await client.sync_ams_tray(tray, printer_name)
                        if result:
                            synced += 1
                    except Exception as e:
                        logger.error(f"Error syncing AMS {ams_id} tray {tray.tray_id}: {e}")

            if synced > 0:
                logger.info(f"Auto-synced {synced} AMS trays to Spoolman for printer {printer_id}")

    except Exception as e:
        import logging

        logging.getLogger(__name__).warning(f"Spoolman AMS sync failed: {e}")


async def _send_print_start_notification(
    printer_id: int,
    data: dict,
    archive_data: dict | None = None,
    logger=None,
):
    """Helper to send print start notification with optional archive data."""
    if logger is None:
        import logging

        logger = logging.getLogger(__name__)

    try:
        async with async_session() as db:
            from backend.app.models.printer import Printer

            result = await db.execute(select(Printer).where(Printer.id == printer_id))
            printer = result.scalar_one_or_none()
            printer_name = printer.name if printer else f"Printer {printer_id}"
            await notification_service.on_print_start(printer_id, printer_name, data, db, archive_data=archive_data)
    except Exception as e:
        logger.warning(f"Notification on_print_start failed: {e}")


def _load_objects_from_archive(archive, printer_id: int, logger) -> None:
    """Extract printable objects from an archive's 3MF file and store in printer state."""
    try:
        from backend.app.services.archive import extract_printable_objects_from_3mf

        file_path = app_settings.base_dir / archive.file_path
        if file_path.exists() and str(file_path).endswith(".3mf"):
            with open(file_path, "rb") as f:
                threemf_data = f.read()
            # Extract with positions for UI overlay
            printable_objects, bbox_all = extract_printable_objects_from_3mf(threemf_data, include_positions=True)
            if printable_objects:
                client = printer_manager.get_client(printer_id)
                if client:
                    client.state.printable_objects = printable_objects
                    client.state.printable_objects_bbox_all = bbox_all
                    client.state.skipped_objects = []
                    logger.info(f"Loaded {len(printable_objects)} printable objects for printer {printer_id}")
    except Exception as e:
        logger.debug(f"Failed to extract printable objects from archive: {e}")


async def on_print_start(printer_id: int, data: dict):
    """Handle print start - archive the 3MF file immediately."""
    import logging

    logger = logging.getLogger(__name__)

    logger.info(f"[CALLBACK] on_print_start called for printer {printer_id}, data keys: {list(data.keys())}")

    await ws_manager.send_print_start(printer_id, data)

    # MQTT relay - publish print start
    try:
        printer_info = printer_manager.get_printer(printer_id)
        if printer_info:
            await mqtt_relay.on_print_start(
                printer_id,
                printer_info.name,
                printer_info.serial_number,
                data.get("filename", ""),
                data.get("subtask_name", ""),
            )
    except Exception:
        pass  # Don't fail print start callback if MQTT fails

    # Track if notification was sent (to avoid sending twice)
    notification_sent = False

    # Smart plug automation: turn on plug when print starts
    try:
        async with async_session() as db:
            await smart_plug_manager.on_print_start(printer_id, db)
    except Exception as e:
        logger.warning(f"Smart plug on_print_start failed: {e}")

    async with async_session() as db:
        from backend.app.models.printer import Printer
        from backend.app.services.bambu_ftp import list_files_async

        result = await db.execute(select(Printer).where(Printer.id == printer_id))
        printer = result.scalar_one_or_none()

        # Plate detection check - pause if objects detected on build plate
        if printer and printer.plate_detection_enabled:
            try:
                from backend.app.services.plate_detection import check_plate_empty

                # Build ROI tuple from printer settings if available
                roi = None
                if all(
                    [
                        printer.plate_detection_roi_x is not None,
                        printer.plate_detection_roi_y is not None,
                        printer.plate_detection_roi_w is not None,
                        printer.plate_detection_roi_h is not None,
                    ]
                ):
                    roi = (
                        printer.plate_detection_roi_x,
                        printer.plate_detection_roi_y,
                        printer.plate_detection_roi_w,
                        printer.plate_detection_roi_h,
                    )

                # Auto-turn on chamber light if it's off for better detection
                light_was_off = False
                client = printer_manager.get_client(printer_id)
                if client and client.state:
                    light_was_off = not client.state.chamber_light
                    if light_was_off:
                        logger.info(f"[PLATE CHECK] Turning on chamber light for printer {printer_id}")
                        client.set_chamber_light(True)
                        # Wait for light to physically turn on and camera to adjust exposure
                        await asyncio.sleep(2.5)

                logger.info(f"[PLATE CHECK] Running plate detection for printer {printer_id}")
                plate_result = await check_plate_empty(
                    printer_id=printer_id,
                    ip_address=printer.ip_address,
                    access_code=printer.access_code,
                    model=printer.model,
                    include_debug_image=False,
                    external_camera_url=printer.external_camera_url,
                    external_camera_type=printer.external_camera_type,
                    use_external=printer.external_camera_enabled,
                    roi=roi,
                )

                # Restore chamber light to original state
                if light_was_off and client:
                    logger.info(f"[PLATE CHECK] Restoring chamber light to off for printer {printer_id}")
                    client.set_chamber_light(False)

                if not plate_result.needs_calibration and not plate_result.is_empty:
                    # Objects detected - pause the print!
                    logger.warning(
                        f"[PLATE CHECK] Objects detected on plate for printer {printer_id}! "
                        f"Confidence: {plate_result.confidence:.0%}, Diff: {plate_result.difference_percent:.1f}%"
                    )
                    client = printer_manager.get_client(printer_id)
                    if client:
                        client.pause_print()
                        logger.info(f"[PLATE CHECK] Print paused for printer {printer_id}")

                    # Send notification about plate not empty
                    await ws_manager.broadcast(
                        {
                            "type": "plate_not_empty",
                            "printer_id": printer_id,
                            "printer_name": printer.name,
                            "message": f"Objects detected on build plate! Print paused. (Diff: {plate_result.difference_percent:.1f}%)",
                        }
                    )

                    # Also send push notification
                    try:
                        await notification_service.on_plate_not_empty(
                            printer_id=printer_id,
                            printer_name=printer.name,
                            db=db,
                            difference_percent=plate_result.difference_percent,
                        )
                    except Exception as notif_err:
                        logger.warning(f"[PLATE CHECK] Failed to send notification: {notif_err}")
                else:
                    logger.info(f"[PLATE CHECK] Plate is empty for printer {printer_id}, proceeding with print")
            except Exception as plate_err:
                # Don't block print on plate detection errors
                logger.warning(f"[PLATE CHECK] Plate detection failed for printer {printer_id}: {plate_err}")

        if not printer or not printer.auto_archive:
            # Send notification without archive data (auto-archive disabled)
            logger.info(
                f"[CALLBACK] Skipping archive - printer: {printer is not None}, auto_archive: {printer.auto_archive if printer else 'N/A'}"
            )
            if not notification_sent:
                await _send_print_start_notification(printer_id, data, logger=logger)
            return

        # Get the filename and subtask_name
        filename = data.get("filename", "")
        subtask_name = data.get("subtask_name", "")

        logger.info(f"[CALLBACK] Print start detected - filename: {filename}, subtask: {subtask_name}")

        if not filename and not subtask_name:
            # Send notification without archive data (no filename)
            logger.info("[CALLBACK] Skipping archive - no filename or subtask_name")
            if not notification_sent:
                await _send_print_start_notification(printer_id, data, logger=logger)
            return

        # Check if this is an expected print from reprint/scheduled
        # Build list of possible keys to check
        expected_keys = []
        if subtask_name:
            expected_keys.append((printer_id, subtask_name))
            expected_keys.append((printer_id, f"{subtask_name}.3mf"))
            expected_keys.append((printer_id, f"{subtask_name}.gcode.3mf"))
        if filename:
            fname = filename.split("/")[-1] if "/" in filename else filename
            expected_keys.append((printer_id, fname))
            # Strip extensions to match
            base = fname.replace(".gcode", "").replace(".3mf", "")
            expected_keys.append((printer_id, base))
            expected_keys.append((printer_id, f"{base}.3mf"))

        expected_archive_id = None
        for key in expected_keys:
            expected_archive_id = _expected_prints.pop(key, None)
            if expected_archive_id:
                # Clean up other possible keys for this print
                for other_key in expected_keys:
                    _expected_prints.pop(other_key, None)
                break

        if expected_archive_id:
            # This is a reprint/scheduled print - use existing archive, don't create new one
            logger.info(f"Using expected archive {expected_archive_id} for print (skipping duplicate)")
            from backend.app.models.archive import PrintArchive

            result = await db.execute(select(PrintArchive).where(PrintArchive.id == expected_archive_id))
            archive = result.scalar_one_or_none()

            if archive:
                # Update archive status to printing
                archive.status = "printing"
                archive.started_at = datetime.now()
                await db.commit()

                # Track as active print
                _active_prints[(printer_id, archive.filename)] = archive.id
                if subtask_name:
                    _active_prints[(printer_id, f"{subtask_name}.3mf")] = archive.id

                # Mark as reprint so we add cost on completion
                _reprint_archives.add(archive.id)
                logger.info(f"Marked archive {archive.id} as reprint for cost addition on completion")

                # Set up energy tracking
                try:
                    plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
                    plug = plug_result.scalar_one_or_none()
                    logger.info(
                        f"[ENERGY] Print start - archive {archive.id}, printer {printer_id}, plug found: {plug is not None}"
                    )
                    if plug:
                        energy = await _get_plug_energy(plug, db)
                        logger.info(f"[ENERGY] Energy response from plug: {energy}")
                        if energy and energy.get("total") is not None:
                            _print_energy_start[archive.id] = energy["total"]
                            logger.info(
                                f"[ENERGY] Recorded starting energy for archive {archive.id}: {energy['total']} kWh"
                            )
                        else:
                            logger.warning(f"[ENERGY] No 'total' in energy response for archive {archive.id}")
                    else:
                        logger.info(f"[ENERGY] No smart plug found for printer {printer_id}")
                except Exception as e:
                    logger.warning(f"Failed to record starting energy: {e}")

                await ws_manager.send_archive_updated(
                    {
                        "id": archive.id,
                        "status": "printing",
                    }
                )

                # Send notification with archive data (reprint/scheduled)
                if not notification_sent:
                    archive_data = {"print_time_seconds": archive.print_time_seconds}
                    await _send_print_start_notification(printer_id, data, archive_data, logger)

                # Extract printable objects from the archived 3MF file
                _load_objects_from_archive(archive, printer_id, logger)

            return  # Skip creating a new archive

        # Check if there's already a "printing" archive for this printer/file
        # This prevents duplicates when backend restarts during an active print
        from backend.app.models.archive import PrintArchive

        check_name = subtask_name or filename.split("/")[-1].replace(".gcode", "").replace(".3mf", "")
        existing = await db.execute(
            select(PrintArchive)
            .where(PrintArchive.printer_id == printer_id)
            .where(PrintArchive.status == "printing")
            .where(PrintArchive.print_name.ilike(f"%{check_name}%"))
            .order_by(PrintArchive.created_at.desc())
            .limit(1)
        )
        existing_archive = existing.scalar_one_or_none()
        if existing_archive:
            # Check if archive is stale (older than 4 hours) - likely a failed/cancelled print
            # that didn't get properly updated
            archive_age = datetime.now(UTC) - existing_archive.created_at.replace(tzinfo=UTC)
            if archive_age.total_seconds() > 4 * 60 * 60:  # 4 hours
                logger.warning(
                    f"Found stale 'printing' archive {existing_archive.id} (age: {archive_age}), "
                    f"marking as cancelled and creating new archive"
                )
                existing_archive.status = "cancelled"
                existing_archive.failure_reason = "Stale - print likely cancelled or failed without status update"
                await db.commit()
                # Fall through to create new archive (don't return)
                existing_archive = None  # Clear so we don't use stale archive
            else:
                logger.info(
                    f"Skipping duplicate - already have printing archive {existing_archive.id} for {check_name}"
                )
                # Track this as the active print
                _active_prints[(printer_id, existing_archive.filename)] = existing_archive.id
                # Also set up energy tracking if not already tracked
                if existing_archive.id not in _print_energy_start:
                    try:
                        plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
                        plug = plug_result.scalar_one_or_none()
                        if plug:
                            energy = await _get_plug_energy(plug, db)
                            if energy and energy.get("total") is not None:
                                _print_energy_start[existing_archive.id] = energy["total"]
                                logger.info(
                                    f"Recorded starting energy for existing archive {existing_archive.id}: {energy['total']} kWh"
                                )
                    except Exception as e:
                        logger.warning(f"Failed to record starting energy for existing archive: {e}")
                # Send notification with archive data (existing archive)
                if not notification_sent:
                    archive_data = {"print_time_seconds": existing_archive.print_time_seconds}
                    await _send_print_start_notification(printer_id, data, archive_data, logger)
                # Extract printable objects from the archived 3MF file
                _load_objects_from_archive(existing_archive, printer_id, logger)
                return

        # Build list of possible 3MF filenames to try
        possible_names = []

        # Bambu printers typically store files as "Name.gcode.3mf"
        # The subtask_name is usually the best source for the filename
        if subtask_name:
            # Try common Bambu naming patterns
            possible_names.append(f"{subtask_name}.gcode.3mf")
            possible_names.append(f"{subtask_name}.3mf")

        # Try original filename with .3mf extension
        if filename:
            # Extract just the filename part, not the full path
            fname = filename.split("/")[-1] if "/" in filename else filename
            if fname.endswith(".3mf"):
                possible_names.append(fname)
            elif fname.endswith(".gcode"):
                base = fname.rsplit(".", 1)[0]
                possible_names.append(f"{base}.gcode.3mf")
                possible_names.append(f"{base}.3mf")
            else:
                possible_names.append(f"{fname}.gcode.3mf")
                possible_names.append(f"{fname}.3mf")

        # Remove duplicates while preserving order
        seen = set()
        possible_names = [x for x in possible_names if not (x in seen or seen.add(x))]

        logger.info(f"Trying filenames: {possible_names}")

        # Try to find and download the 3MF file
        temp_path = None
        downloaded_filename = None

        # Get FTP retry settings
        ftp_retry_enabled, ftp_retry_count, ftp_retry_delay, ftp_timeout = await get_ftp_retry_settings()

        for try_filename in possible_names:
            if not try_filename.endswith(".3mf"):
                continue

            remote_paths = [
                f"/cache/{try_filename}",
                f"/model/{try_filename}",
                f"/data/{try_filename}",
                f"/data/Metadata/{try_filename}",
                f"/{try_filename}",
            ]

            temp_path = app_settings.archive_dir / "temp" / try_filename
            temp_path.parent.mkdir(parents=True, exist_ok=True)

            for remote_path in remote_paths:
                logger.debug(f"Trying FTP download: {remote_path}")
                try:
                    if ftp_retry_enabled:
                        downloaded = await with_ftp_retry(
                            download_file_async,
                            printer.ip_address,
                            printer.access_code,
                            remote_path,
                            temp_path,
                            socket_timeout=ftp_timeout,
                            printer_model=printer.model,
                            max_retries=ftp_retry_count,
                            retry_delay=ftp_retry_delay,
                            operation_name=f"Download 3MF from {remote_path}",
                        )
                    else:
                        downloaded = await download_file_async(
                            printer.ip_address,
                            printer.access_code,
                            remote_path,
                            temp_path,
                            socket_timeout=ftp_timeout,
                            printer_model=printer.model,
                        )
                    if downloaded:
                        downloaded_filename = try_filename
                        logger.info(f"Downloaded: {remote_path}")
                        break
                except Exception as e:
                    logger.debug(f"FTP download failed for {remote_path}: {e}")

            if downloaded_filename:
                break

        # If still not found, try listing directories to find matching file
        # Different printer models use different directory structures
        if not downloaded_filename and (filename or subtask_name):
            search_term = (subtask_name or filename).lower().replace(".gcode", "").replace(".3mf", "")
            logger.info(f"Direct FTP download failed, searching directories for '{search_term}'")
            search_dirs = ["/cache", "/model", "/data", "/data/Metadata", "/"]
            for search_dir in search_dirs:
                if downloaded_filename:
                    break
                try:
                    dir_files = await list_files_async(printer.ip_address, printer.access_code, search_dir)
                    threemf_files = [f.get("name") for f in dir_files if f.get("name", "").endswith(".3mf")]
                    if threemf_files:
                        logger.info(
                            f"Found {len(threemf_files)} 3MF files in {search_dir}: {threemf_files[:5]}{'...' if len(threemf_files) > 5 else ''}"
                        )
                    for f in dir_files:
                        if f.get("is_directory"):
                            continue
                        fname = f.get("name", "")
                        if fname.endswith(".3mf") and search_term in fname.lower():
                            logger.info(f"Found matching file in {search_dir}: {fname}")
                            temp_path = app_settings.archive_dir / "temp" / fname
                            temp_path.parent.mkdir(parents=True, exist_ok=True)
                            if ftp_retry_enabled:
                                downloaded = await with_ftp_retry(
                                    download_file_async,
                                    printer.ip_address,
                                    printer.access_code,
                                    f"{search_dir}/{fname}",
                                    temp_path,
                                    max_retries=ftp_retry_count,
                                    retry_delay=ftp_retry_delay,
                                    operation_name=f"Download 3MF from {search_dir}/{fname}",
                                )
                            else:
                                downloaded = await download_file_async(
                                    printer.ip_address,
                                    printer.access_code,
                                    f"{search_dir}/{fname}",
                                    temp_path,
                                )
                            if downloaded:
                                downloaded_filename = fname
                                logger.info(f"Found and downloaded from {search_dir}: {fname}")
                                break
                except Exception as e:
                    logger.debug(f"Failed to list {search_dir}: {e}")

        if not downloaded_filename or not temp_path:
            logger.warning(f"Could not find 3MF file for print: {filename or subtask_name}")
            # Create a fallback archive without 3MF data so the print is still tracked
            # This commonly happens with P1S/A1 printers where FTP has file size limitations
            try:
                from backend.app.models.archive import PrintArchive

                # Derive print name from subtask_name or filename
                print_name = subtask_name or filename
                if print_name:
                    # Clean up the name (remove extensions, path parts)
                    print_name = print_name.split("/")[-1]
                    print_name = print_name.replace(".gcode.3mf", "").replace(".gcode", "").replace(".3mf", "")
                else:
                    print_name = "Unknown Print"

                # Create minimal archive entry
                fallback_archive = PrintArchive(
                    printer_id=printer_id,
                    filename=filename or f"{print_name}.3mf",
                    file_path="",  # Empty - no 3MF file available
                    file_size=0,
                    print_name=print_name,
                    status="printing",
                    started_at=datetime.now(),
                    extra_data={"no_3mf_available": True, "original_subtask": subtask_name, "_print_data": data},
                )

                db.add(fallback_archive)
                await db.commit()
                await db.refresh(fallback_archive)

                logger.info(f"Created fallback archive {fallback_archive.id} for {print_name} (no 3MF available)")

                # Start timelapse session if external camera is enabled
                if printer.external_camera_enabled and printer.external_camera_url:
                    from backend.app.services.layer_timelapse import start_session

                    start_session(
                        printer_id,
                        fallback_archive.id,
                        printer.external_camera_url,
                        printer.external_camera_type or "mjpeg",
                    )
                    logger.info(f"Started layer timelapse for printer {printer_id}, archive {fallback_archive.id}")

                # Track as active print
                _active_prints[(printer_id, fallback_archive.filename)] = fallback_archive.id
                if filename:
                    _active_prints[(printer_id, filename)] = fallback_archive.id
                if subtask_name:
                    _active_prints[(printer_id, f"{subtask_name}.3mf")] = fallback_archive.id
                    _active_prints[(printer_id, subtask_name)] = fallback_archive.id

                # Record starting energy if smart plug available
                try:
                    plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
                    plug = plug_result.scalar_one_or_none()
                    if plug:
                        energy = await _get_plug_energy(plug, db)
                        if energy and energy.get("total") is not None:
                            _print_energy_start[fallback_archive.id] = energy["total"]
                            logger.info(
                                f"[ENERGY] Recorded starting energy for fallback archive {fallback_archive.id}: {energy['total']} kWh"
                            )
                except Exception as e:
                    logger.warning(f"Failed to record starting energy for fallback: {e}")

                # Send WebSocket notification
                await ws_manager.send_archive_created(
                    {
                        "id": fallback_archive.id,
                        "printer_id": fallback_archive.printer_id,
                        "filename": fallback_archive.filename,
                        "print_name": fallback_archive.print_name,
                        "status": fallback_archive.status,
                    }
                )

                # MQTT relay - publish archive created
                try:
                    await mqtt_relay.on_archive_created(
                        archive_id=fallback_archive.id,
                        print_name=fallback_archive.print_name,
                        printer_name=printer.name,
                        status=fallback_archive.status,
                    )
                except Exception:
                    pass  # Don't fail if MQTT fails

                # Send notification without archive data (file not found)
                if not notification_sent:
                    await _send_print_start_notification(printer_id, data, logger=logger)
                return
            except Exception as e:
                logger.error(f"Failed to create fallback archive: {e}")
                # Send notification without archive data (file not found)
                if not notification_sent:
                    await _send_print_start_notification(printer_id, data, logger=logger)
                return

        try:
            # Archive the file with status "printing"
            service = ArchiveService(db)
            archive = await service.archive_print(
                printer_id=printer_id,
                source_file=temp_path,
                print_data={**data, "status": "printing"},
            )

            if archive:
                # Track this active print (use both original filename and downloaded filename)
                _active_prints[(printer_id, downloaded_filename)] = archive.id
                if filename and filename != downloaded_filename:
                    _active_prints[(printer_id, filename)] = archive.id
                if subtask_name:
                    _active_prints[(printer_id, f"{subtask_name}.3mf")] = archive.id

                logger.info(f"Created archive {archive.id} for {downloaded_filename}")

                # Start timelapse session if external camera is enabled
                if printer.external_camera_enabled and printer.external_camera_url:
                    from backend.app.services.layer_timelapse import start_session

                    start_session(
                        printer_id,
                        archive.id,
                        printer.external_camera_url,
                        printer.external_camera_type or "mjpeg",
                    )
                    logger.info(f"Started layer timelapse for printer {printer_id}, archive {archive.id}")

                # Record starting energy from smart plug if available
                try:
                    plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
                    plug = plug_result.scalar_one_or_none()
                    logger.info(
                        f"[ENERGY] Auto-archive print start - archive {archive.id}, printer {printer_id}, plug found: {plug is not None}"
                    )
                    if plug:
                        energy = await _get_plug_energy(plug, db)
                        logger.info(f"[ENERGY] Auto-archive energy response: {energy}")
                        if energy and energy.get("total") is not None:
                            _print_energy_start[archive.id] = energy["total"]
                            logger.info(
                                f"[ENERGY] Recorded starting energy for archive {archive.id}: {energy['total']} kWh"
                            )
                        else:
                            logger.warning(f"[ENERGY] No 'total' in energy response for archive {archive.id}")
                    else:
                        logger.info(f"[ENERGY] No smart plug found for printer {printer_id}")
                except Exception as e:
                    logger.warning(f"Failed to record starting energy: {e}")

                await ws_manager.send_archive_created(
                    {
                        "id": archive.id,
                        "printer_id": archive.printer_id,
                        "filename": archive.filename,
                        "print_name": archive.print_name,
                        "status": archive.status,
                    }
                )

                # MQTT relay - publish archive created
                try:
                    await mqtt_relay.on_archive_created(
                        archive_id=archive.id,
                        print_name=archive.print_name,
                        printer_name=printer.name,
                        status=archive.status,
                    )
                except Exception:
                    pass  # Don't fail if MQTT fails

                # Send notification with archive data (new archive created)
                if not notification_sent:
                    archive_data = {"print_time_seconds": archive.print_time_seconds}
                    await _send_print_start_notification(printer_id, data, archive_data, logger)
                    notification_sent = True

                # Extract printable objects for skip object functionality
                try:
                    from backend.app.services.archive import extract_printable_objects_from_3mf

                    with open(temp_path, "rb") as f:
                        threemf_data = f.read()
                    # Extract with positions for UI overlay
                    printable_objects, bbox_all = extract_printable_objects_from_3mf(
                        threemf_data, include_positions=True
                    )
                    if printable_objects:
                        # Store objects in printer state
                        client = printer_manager.get_client(printer_id)
                        if client:
                            client.state.printable_objects = printable_objects
                            client.state.printable_objects_bbox_all = bbox_all
                            client.state.skipped_objects = []  # Reset skipped objects for new print
                            logger.info(f"Loaded {len(printable_objects)} printable objects for printer {printer_id}")
                except Exception as e:
                    logger.debug(f"Failed to extract printable objects: {e}")
        finally:
            if temp_path and temp_path.exists():
                temp_path.unlink()


async def _scan_for_timelapse_with_retries(archive_id: int):
    """
    Scan for timelapse with retries.

    The printer encodes the timelapse quickly after print completion.
    We just need a short delay then grab the most recent file.

    Since we KNOW timelapse was active (from MQTT ipcam data), the most recent
    file in /timelapse is our target. Retries handle FTP connection issues.
    """
    import logging

    logger = logging.getLogger(__name__)

    # Short delays - printer usually finishes encoding within seconds
    retry_delays = [5, 10, 20]

    for attempt, delay in enumerate(retry_delays, 1):
        logger.info(
            f"[TIMELAPSE] Attempt {attempt}/{len(retry_delays)}: waiting {delay}s before scanning for archive {archive_id}"
        )
        await asyncio.sleep(delay)

        try:
            async with async_session() as db:
                from backend.app.models.printer import Printer
                from backend.app.services.bambu_ftp import download_file_bytes_async, list_files_async

                # Get archive (ArchiveService from module-level import)
                service = ArchiveService(db)
                archive = await service.get_archive(archive_id)

                if not archive:
                    logger.warning(f"[TIMELAPSE] Archive {archive_id} not found, stopping retries")
                    return
                if archive.timelapse_path:
                    logger.info(f"[TIMELAPSE] Archive {archive_id} already has timelapse attached, stopping retries")
                    return
                if not archive.printer_id:
                    logger.warning(f"[TIMELAPSE] Archive {archive_id} has no printer, stopping retries")
                    return

                # Get printer
                result = await db.execute(select(Printer).where(Printer.id == archive.printer_id))
                printer = result.scalar_one_or_none()

                if not printer:
                    logger.warning(f"[TIMELAPSE] Printer not found for archive {archive_id}, stopping retries")
                    return

                # Scan timelapse directory on printer
                # H2D may store in different locations than X1C
                files = []
                found_path = None
                for timelapse_path in ["/timelapse", "/timelapse/video", "/record", "/recording"]:
                    try:
                        found_files = await list_files_async(printer.ip_address, printer.access_code, timelapse_path)
                        if found_files:
                            files = found_files
                            found_path = timelapse_path
                            logger.info(f"[TIMELAPSE] Attempt {attempt}: Found {len(files)} files in {timelapse_path}")
                            break
                    except Exception as e:
                        logger.debug(f"[TIMELAPSE] Path {timelapse_path} failed: {e}")
                        continue

                if not files:
                    logger.info(f"[TIMELAPSE] Attempt {attempt}: No timelapse files found on printer, will retry")
                    continue

                mp4_files = [f for f in files if not f.get("is_directory") and f.get("name", "").endswith(".mp4")]

                # Log ALL mp4 files found for debugging
                logger.info(f"[TIMELAPSE] Attempt {attempt}: Found {len(mp4_files)} MP4 files in {found_path}")
                for f in mp4_files[:5]:  # Log first 5
                    logger.info(f"[TIMELAPSE]   - {f.get('name')}, mtime={f.get('mtime')}")

                if not mp4_files:
                    logger.info(f"[TIMELAPSE] Attempt {attempt}: No MP4 files found, will retry")
                    continue

                # Sort by mtime descending to get most recent file
                mp4_files_with_mtime = [f for f in mp4_files if f.get("mtime")]
                if not mp4_files_with_mtime:
                    logger.info(f"[TIMELAPSE] Attempt {attempt}: No MP4 files with mtime found, will retry")
                    continue

                mp4_files_with_mtime.sort(key=lambda x: x.get("mtime"), reverse=True)
                most_recent = mp4_files_with_mtime[0]

                file_name = most_recent.get("name")
                logger.info(f"[TIMELAPSE] Attempt {attempt}: Most recent file: {file_name}")

                # Since we KNOW timelapse was active (from MQTT), just grab the most recent file
                remote_path = most_recent.get("path") or f"/timelapse/{file_name}"
                logger.info(f"[TIMELAPSE] Downloading {file_name} for archive {archive_id}")
                timelapse_data = await download_file_bytes_async(printer.ip_address, printer.access_code, remote_path)

                if timelapse_data:
                    success = await service.attach_timelapse(archive_id, timelapse_data, file_name)
                    if success:
                        logger.info(f"[TIMELAPSE] Successfully attached timelapse to archive {archive_id}")
                        await ws_manager.send_archive_updated({"id": archive_id, "timelapse_attached": True})
                        return  # Success!
                    else:
                        logger.warning(f"[TIMELAPSE] Failed to attach timelapse to archive {archive_id}")
                else:
                    logger.warning(f"[TIMELAPSE] Attempt {attempt}: Failed to download, will retry")

        except Exception as e:
            logger.warning(f"[TIMELAPSE] Attempt {attempt} failed with error: {e}")

    logger.warning(f"[TIMELAPSE] All {len(retry_delays)} attempts exhausted for archive {archive_id}, giving up")


async def on_print_complete(printer_id: int, data: dict):
    """Handle print completion - update the archive status."""
    import logging
    import time

    logger = logging.getLogger(__name__)
    start_time = time.time()

    def log_timing(section: str):
        elapsed = time.time() - start_time
        logger.info(f"[TIMING] {section}: {elapsed:.3f}s elapsed")

    logger.info(f"[CALLBACK] on_print_complete started for printer {printer_id}")

    try:
        ws_data = {
            "status": data.get("status"),
            "filename": data.get("filename"),
            "subtask_name": data.get("subtask_name"),
            "timelapse_was_active": data.get("timelapse_was_active"),
        }
        await ws_manager.send_print_complete(printer_id, ws_data)
        log_timing("WebSocket send_print_complete")
    except Exception as e:
        logger.warning(f"[CALLBACK] WebSocket send_print_complete failed: {e}")

    # MQTT relay - publish print complete
    try:
        printer_info = printer_manager.get_printer(printer_id)
        if printer_info:
            await mqtt_relay.on_print_complete(
                printer_id,
                printer_info.name,
                printer_info.serial_number,
                data.get("filename", ""),
                data.get("subtask_name", ""),
                data.get("status", "completed"),
            )
    except Exception:
        pass  # Don't fail print complete callback if MQTT fails

    filename = data.get("filename", "")
    subtask_name = data.get("subtask_name", "")

    if not filename and not subtask_name:
        logger.warning("Print complete without filename or subtask_name")
        return

    logger.info(f"Print complete - filename: {filename}, subtask: {subtask_name}, status: {data.get('status')}")

    # Build list of possible keys to try (matching how they were registered in on_print_start)
    possible_keys = []

    # Try subtask_name variations first (most reliable for matching)
    if subtask_name:
        possible_keys.append((printer_id, f"{subtask_name}.3mf"))
        possible_keys.append((printer_id, f"{subtask_name}.gcode.3mf"))
        possible_keys.append((printer_id, subtask_name))

    # Try filename variations
    if filename:
        # Extract just the filename if it's a path
        fname = filename.split("/")[-1] if "/" in filename else filename

        if fname.endswith(".3mf"):
            possible_keys.append((printer_id, fname))
        elif fname.endswith(".gcode"):
            base_name = fname.rsplit(".", 1)[0]
            possible_keys.append((printer_id, f"{base_name}.gcode.3mf"))
            possible_keys.append((printer_id, f"{base_name}.3mf"))
            possible_keys.append((printer_id, fname))
        else:
            possible_keys.append((printer_id, f"{fname}.gcode.3mf"))
            possible_keys.append((printer_id, f"{fname}.3mf"))
            possible_keys.append((printer_id, fname))

        # Also try full path versions
        if filename.endswith(".3mf"):
            possible_keys.append((printer_id, filename))
        elif filename.endswith(".gcode"):
            base_name = filename.rsplit(".", 1)[0]
            possible_keys.append((printer_id, f"{base_name}.3mf"))
            possible_keys.append((printer_id, filename))
        else:
            possible_keys.append((printer_id, f"{filename}.3mf"))
            possible_keys.append((printer_id, filename))

    # Find the archive for this print
    logger.info(f"Looking for archive in _active_prints, keys to try: {possible_keys[:5]}...")
    logger.info(f"Current _active_prints: {list(_active_prints.keys())}")
    archive_id = None
    for key in possible_keys:
        archive_id = _active_prints.pop(key, None)
        if archive_id:
            logger.info(f"Found archive {archive_id} with key {key}")
            # Also clean up any other keys pointing to this archive
            keys_to_remove = [k for k, v in _active_prints.items() if v == archive_id]
            for k in keys_to_remove:
                _active_prints.pop(k, None)
            break

    if not archive_id:
        # Try to find by filename or subtask_name if not tracked (for prints started before app)
        async with async_session() as db:
            from backend.app.models.archive import PrintArchive

            # Try matching by subtask_name (stored as print_name) first
            if subtask_name:
                result = await db.execute(
                    select(PrintArchive)
                    .where(PrintArchive.printer_id == printer_id)
                    .where(PrintArchive.status == "printing")
                    .where(
                        or_(
                            PrintArchive.print_name.ilike(f"%{subtask_name}%"),
                            PrintArchive.filename.ilike(f"%{subtask_name}%"),
                        )
                    )
                    .order_by(PrintArchive.created_at.desc())
                    .limit(1)
                )
                archive = result.scalar_one_or_none()
                if archive:
                    archive_id = archive.id
                    logger.info(f"Found archive {archive_id} by subtask_name match: {subtask_name}")

            # Also try by filename
            if not archive_id and filename:
                result = await db.execute(
                    select(PrintArchive)
                    .where(PrintArchive.printer_id == printer_id)
                    .where(PrintArchive.filename == filename)
                    .where(PrintArchive.status == "printing")
                    .order_by(PrintArchive.created_at.desc())
                    .limit(1)
                )
                archive = result.scalar_one_or_none()
                if archive:
                    archive_id = archive.id

    if not archive_id:
        logger.warning(f"Could not find archive for print complete: filename={filename}, subtask={subtask_name}")
        return

    log_timing("Archive lookup")

    # Update archive status
    logger.info(f"[ARCHIVE] Updating archive {archive_id} status...")
    try:
        async with async_session() as db:
            service = ArchiveService(db)
            status = data.get("status", "completed")

            # Auto-detect failure reason
            failure_reason = None
            if status == "aborted":
                failure_reason = "User cancelled"
                logger.info("[ARCHIVE] Print was aborted by user, setting failure_reason='User cancelled'")
            elif status == "failed":
                # Try to determine failure reason from HMS errors
                hms_errors = data.get("hms_errors", [])
                if hms_errors:
                    logger.info(f"[ARCHIVE] HMS errors at failure: {hms_errors}")
                    # Map known HMS error modules to failure reasons
                    # Module 0x07 = Filament, 0x0C = MC (Motion Controller), etc.
                    for err in hms_errors:
                        module = err.get("module", 0)
                        if module == 0x07:  # Filament module
                            failure_reason = "Filament runout"
                            break
                        elif module == 0x0C:  # Motion controller
                            failure_reason = "Layer shift"
                            break
                        elif module == 0x05:  # Nozzle/extruder
                            failure_reason = "Clogged nozzle"
                            break
                    if failure_reason:
                        logger.info(f"[ARCHIVE] Detected failure_reason from HMS: {failure_reason}")
                else:
                    logger.info("[ARCHIVE] No HMS errors available to determine failure reason")

            await service.update_archive_status(
                archive_id,
                status=status,
                completed_at=datetime.now() if status in ("completed", "failed", "aborted") else None,
                failure_reason=failure_reason,
            )
            logger.info(f"[ARCHIVE] Archive {archive_id} status updated to {status}, failure_reason={failure_reason}")

            # Add cost for reprints (first prints have cost set in archive_print())
            if status == "completed" and archive_id in _reprint_archives:
                _reprint_archives.discard(archive_id)
                try:
                    await service.add_reprint_cost(archive_id)
                    logger.info(f"[ARCHIVE] Added reprint cost for archive {archive_id}")
                except Exception as e:
                    logger.warning(f"[ARCHIVE] Failed to add reprint cost for archive {archive_id}: {e}")

            await ws_manager.send_archive_updated(
                {
                    "id": archive_id,
                    "status": status,
                }
            )
            logger.info(f"[ARCHIVE] WebSocket notification sent for archive {archive_id}")

            # MQTT relay - publish archive updated
            try:
                await mqtt_relay.on_archive_updated(
                    archive_id=archive_id,
                    print_name=filename or subtask_name,
                    status=status,
                )
            except Exception:
                pass  # Don't fail if MQTT fails
    except Exception as e:
        logger.error(f"[ARCHIVE] Failed to update archive {archive_id} status: {e}", exc_info=True)
        # Continue with other operations even if archive update fails

    log_timing("Archive status update")

    # Report filament usage to Spoolman if print completed successfully
    if data.get("status") == "completed":
        try:
            await _report_spoolman_usage(printer_id, archive_id, logger)
            log_timing("Spoolman usage report")
        except Exception as e:
            logger.warning(f"Spoolman usage reporting failed: {e}")

    # Run slow operations as background tasks to avoid blocking the event loop
    # These operations can take 5-10+ seconds and would freeze the UI if awaited
    starting_kwh = _print_energy_start.pop(archive_id, None)

    async def _background_energy_calculation():
        """Calculate and save energy usage in background."""
        try:
            logger.info(f"[ENERGY-BG] Starting energy calculation for archive {archive_id}")
            async with async_session() as db:
                plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
                plug = plug_result.scalar_one_or_none()

                if plug:
                    energy = await _get_plug_energy(plug, db)
                    logger.info(f"[ENERGY-BG] Energy response: {energy}")

                    energy_used = None
                    if starting_kwh is not None and energy and energy.get("total") is not None:
                        ending_kwh = energy["total"]
                        energy_used = round(ending_kwh - starting_kwh, 4)
                        logger.info(f"[ENERGY-BG] Per-print energy: {energy_used} kWh")

                    if energy_used is not None and energy_used >= 0:
                        from backend.app.api.routes.settings import get_setting

                        energy_cost_per_kwh = await get_setting(db, "energy_cost_per_kwh")
                        cost_per_kwh = float(energy_cost_per_kwh) if energy_cost_per_kwh else 0.15
                        energy_cost = round(energy_used * cost_per_kwh, 2)

                        from backend.app.models.archive import PrintArchive

                        result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
                        archive = result.scalar_one_or_none()
                        if archive:
                            archive.energy_kwh = energy_used
                            archive.energy_cost = energy_cost
                            await db.commit()
                            logger.info(f"[ENERGY-BG] Saved: {energy_used} kWh, cost={energy_cost}")
                else:
                    logger.info(f"[ENERGY-BG] No smart plug for printer {printer_id}")
        except Exception as e:
            logger.warning(f"[ENERGY-BG] Failed: {e}")

    async def _background_finish_photo() -> str | None:
        """Capture finish photo in background. Returns photo filename if captured."""
        try:
            logger.info(f"[PHOTO-BG] Starting finish photo capture for archive {archive_id}")

            from backend.app.api.routes.camera import _active_chamber_streams, _active_streams, get_buffered_frame

            async with async_session() as db:
                from backend.app.api.routes.settings import get_setting

                capture_enabled = await get_setting(db, "capture_finish_photo")

                if capture_enabled is None or capture_enabled.lower() == "true":
                    from backend.app.models.printer import Printer

                    result = await db.execute(select(Printer).where(Printer.id == printer_id))
                    printer = result.scalar_one_or_none()

                    if printer and archive_id:
                        from backend.app.models.archive import PrintArchive

                        result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
                        archive = result.scalar_one_or_none()

                        if archive:
                            import uuid
                            from datetime import datetime
                            from pathlib import Path

                            archive_dir = app_settings.base_dir / Path(archive.file_path).parent
                            photo_filename = None

                            # Check for external camera first
                            if printer.external_camera_enabled and printer.external_camera_url:
                                logger.info("[PHOTO-BG] Using external camera")
                                from backend.app.services.external_camera import capture_frame

                                frame_data = await capture_frame(
                                    printer.external_camera_url, printer.external_camera_type or "mjpeg"
                                )
                                if frame_data:
                                    photos_dir = archive_dir / "photos"
                                    photos_dir.mkdir(parents=True, exist_ok=True)
                                    timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
                                    photo_filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
                                    photo_path = photos_dir / photo_filename
                                    await asyncio.to_thread(photo_path.write_bytes, frame_data)
                                    logger.info(f"[PHOTO-BG] Saved external camera frame: {photo_filename}")
                            else:
                                # Check if camera stream is active - use buffered frame to avoid freeze
                                # Check both RTSP streams (_active_streams) and chamber image streams (_active_chamber_streams)
                                active_for_printer = [k for k in _active_streams if k.startswith(f"{printer_id}-")]
                                active_chamber_for_printer = [
                                    k for k in _active_chamber_streams if k.startswith(f"{printer_id}-")
                                ]
                                buffered_frame = get_buffered_frame(printer_id)

                                if (active_for_printer or active_chamber_for_printer) and buffered_frame:
                                    # Use frame from active stream
                                    logger.info("[PHOTO-BG] Using buffered frame from active stream")
                                    photos_dir = archive_dir / "photos"
                                    photos_dir.mkdir(parents=True, exist_ok=True)
                                    timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
                                    photo_filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
                                    photo_path = photos_dir / photo_filename
                                    await asyncio.to_thread(photo_path.write_bytes, buffered_frame)
                                    logger.info(f"[PHOTO-BG] Saved buffered frame: {photo_filename}")
                                else:
                                    # No active stream - capture new frame
                                    from backend.app.services.camera import capture_finish_photo

                                    photo_filename = await capture_finish_photo(
                                        printer_id=printer_id,
                                        ip_address=printer.ip_address,
                                        access_code=printer.access_code,
                                        model=printer.model,
                                        archive_dir=archive_dir,
                                    )

                            if photo_filename:
                                photos = archive.photos or []
                                photos.append(photo_filename)
                                archive.photos = photos
                                await db.commit()
                                logger.info(f"[PHOTO-BG] Saved: {photo_filename}")
                                return photo_filename
            return None
        except Exception as e:
            logger.warning(f"[PHOTO-BG] Failed: {e}")
            return None

    asyncio.create_task(_background_energy_calculation())
    # Photo capture task - result will be used by notifications
    photo_task = asyncio.create_task(_background_finish_photo())
    log_timing("Background tasks scheduled (energy, photo)")

    # Also run smart plug, notifications, and maintenance as background tasks
    print_status = data.get("status", "completed")

    async def _background_smart_plug():
        """Handle smart plug automation in background."""
        try:
            logger.info(f"[AUTO-OFF-BG] Starting smart plug automation for printer {printer_id}")
            async with async_session() as db:
                await smart_plug_manager.on_print_complete(printer_id, print_status, db)
                logger.info("[AUTO-OFF-BG] Completed")
        except Exception as e:
            logger.warning(f"[AUTO-OFF-BG] Failed: {e}")

    async def _background_notifications(finish_photo_filename: str | None = None):
        """Send print complete notifications in background."""
        try:
            logger.info(f"[NOTIFY-BG] Starting notifications for printer {printer_id}, photo={finish_photo_filename}")
            async with async_session() as db:
                from backend.app.models.archive import PrintArchive
                from backend.app.models.printer import Printer

                result = await db.execute(select(Printer).where(Printer.id == printer_id))
                printer = result.scalar_one_or_none()
                printer_name = printer.name if printer else f"Printer {printer_id}"

                archive_data = None
                if archive_id:
                    archive_result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
                    archive = archive_result.scalar_one_or_none()
                    if archive:
                        archive_data = {
                            "print_time_seconds": archive.print_time_seconds,
                            "actual_filament_grams": archive.filament_used_grams,
                            "failure_reason": archive.failure_reason,
                        }
                        # Add finish photo URL if available
                        if finish_photo_filename:
                            from backend.app.api.routes.settings import get_setting

                            external_url = await get_setting(db, "external_url")
                            if external_url:
                                external_url = external_url.rstrip("/")
                                archive_data["finish_photo_url"] = (
                                    f"{external_url}/api/v1/archives/{archive_id}/photos/{finish_photo_filename}"
                                )
                            else:
                                # Fallback to relative URL (won't work for external services)
                                archive_data["finish_photo_url"] = (
                                    f"/api/v1/archives/{archive_id}/photos/{finish_photo_filename}"
                                )

                await notification_service.on_print_complete(
                    printer_id, printer_name, print_status, data, db, archive_data=archive_data
                )
                logger.info("[NOTIFY-BG] Completed")
        except Exception as e:
            logger.warning(f"[NOTIFY-BG] Failed: {e}")

    async def _background_maintenance_check():
        """Check for maintenance due in background."""
        if print_status != "completed":
            return
        try:
            logger.info(f"[MAINT-BG] Starting maintenance check for printer {printer_id}")
            async with async_session() as db:
                from backend.app.models.printer import Printer

                result = await db.execute(select(Printer).where(Printer.id == printer_id))
                printer = result.scalar_one_or_none()
                printer_name = printer.name if printer else f"Printer {printer_id}"

                await ensure_default_types(db)
                overview = await _get_printer_maintenance_internal(printer_id, db, commit=True)

                items_needing_attention = [
                    {"name": item.maintenance_type_name, "is_due": item.is_due, "is_warning": item.is_warning}
                    for item in overview.maintenance_items
                    if item.enabled and (item.is_due or item.is_warning)
                ]

                if items_needing_attention:
                    await notification_service.on_maintenance_due(printer_id, printer_name, items_needing_attention, db)
                    logger.info(f"[MAINT-BG] Sent notification: {len(items_needing_attention)} items need attention")

                    # MQTT relay - publish maintenance alerts
                    for item in items_needing_attention:
                        try:
                            await mqtt_relay.on_maintenance_alert(
                                printer_id=printer_id,
                                printer_name=printer_name,
                                maintenance_type=item["name"],
                                current_value=0,  # Not easily available here
                                threshold=0,  # Not easily available here
                            )
                        except Exception:
                            pass  # Don't fail if MQTT fails
                else:
                    logger.info("[MAINT-BG] Completed (no items need attention)")
        except Exception as e:
            logger.warning(f"[MAINT-BG] Failed: {e}")

    asyncio.create_task(_background_smart_plug())
    asyncio.create_task(_background_maintenance_check())

    # Notification task waits for photo capture to complete first
    async def _photo_then_notify():
        """Wait for photo capture, then send notification with photo URL."""
        try:
            finish_photo = await photo_task
            logger.info(f"[PHOTO-NOTIFY] Photo task returned: {finish_photo}")
            await _background_notifications(finish_photo)
        except Exception as e:
            logger.warning(f"[PHOTO-NOTIFY] Failed: {e}")
            # Still try to send notification without photo
            await _background_notifications(None)

    asyncio.create_task(_photo_then_notify())

    # Stitch external camera layer timelapse if session was active
    print_status = data.get("status", "completed")

    async def _background_layer_timelapse():
        """Stitch layer timelapse and attach to archive."""
        from backend.app.services.layer_timelapse import cancel_session, on_print_complete as tl_complete

        try:
            if print_status == "completed":
                logger.info(f"[LAYER-TL] Stitching layer timelapse for printer {printer_id}")
                timelapse_path = await tl_complete(printer_id)
                if timelapse_path and archive_id:
                    logger.info(f"[LAYER-TL] Attaching timelapse {timelapse_path} to archive {archive_id}")
                    async with async_session() as db:
                        service = ArchiveService(db)
                        timelapse_data = await asyncio.to_thread(timelapse_path.read_bytes)
                        await service.attach_timelapse(archive_id, timelapse_data, "layer_timelapse.mp4")
                        # Clean up the temp file
                        await asyncio.to_thread(timelapse_path.unlink, missing_ok=True)
                        logger.info("[LAYER-TL] Layer timelapse attached successfully")
                elif timelapse_path:
                    # Timelapse created but no archive - just clean up
                    await asyncio.to_thread(timelapse_path.unlink, missing_ok=True)
            else:
                # Print failed or cancelled - cancel timelapse session
                cancel_session(printer_id)
                logger.info(f"[LAYER-TL] Cancelled layer timelapse for printer {printer_id} (status: {print_status})")
        except Exception as e:
            logger.warning(f"[LAYER-TL] Failed: {e}")
            # Try to cancel session on error
            try:
                cancel_session(printer_id)
            except Exception:
                pass

    asyncio.create_task(_background_layer_timelapse())
    log_timing("All background tasks scheduled")

    # Auto-scan for timelapse if recording was active during the print
    if archive_id and data.get("timelapse_was_active") and data.get("status") == "completed":
        logger.info(f"[TIMELAPSE] Timelapse was active during print, scheduling auto-scan for archive {archive_id}")
        # Schedule timelapse scan as background task with retries
        # The printer needs time to encode the video after print completion
        asyncio.create_task(_scan_for_timelapse_with_retries(archive_id))
        log_timing("Timelapse scan scheduled")

    # Update queue item if this was a scheduled print
    try:
        async with async_session() as db:
            from backend.app.models.print_queue import PrintQueueItem
            # Note: SmartPlug is already imported at module level (line 56)
            # Do NOT import it here as it would shadow the module-level import
            # and cause "cannot access local variable" errors earlier in this function

            result = await db.execute(
                select(PrintQueueItem)
                .where(PrintQueueItem.printer_id == printer_id)
                .where(PrintQueueItem.status == "printing")
            )
            queue_item = result.scalar_one_or_none()
            if queue_item:
                status = data.get("status", "completed")
                queue_item.status = status
                queue_item.completed_at = datetime.now()
                await db.commit()
                logger.info(f"Updated queue item {queue_item.id} status to {status}")

                # MQTT relay - publish queue job completed
                try:
                    printer_info = printer_manager.get_printer(printer_id)
                    await mqtt_relay.on_queue_job_completed(
                        job_id=queue_item.id,
                        filename=filename or subtask_name,
                        printer_id=printer_id,
                        printer_name=printer_info.name if printer_info else "Unknown",
                        status=status,
                    )
                except Exception:
                    pass  # Don't fail if MQTT fails

                # Check if queue is now empty and send notification
                try:
                    from sqlalchemy import func

                    # Count remaining pending items
                    count_result = await db.execute(
                        select(func.count(PrintQueueItem.id)).where(PrintQueueItem.status == "pending")
                    )
                    pending_count = count_result.scalar() or 0

                    if pending_count == 0:
                        # Count how many completed today (rough approximation)
                        today_start = datetime.now().replace(hour=0, minute=0, second=0, microsecond=0)
                        completed_result = await db.execute(
                            select(func.count(PrintQueueItem.id)).where(
                                PrintQueueItem.status.in_(["completed", "failed", "skipped"]),
                                PrintQueueItem.completed_at >= today_start,
                            )
                        )
                        completed_count = completed_result.scalar() or 1

                        await notification_service.on_queue_completed(
                            completed_count=completed_count,
                            db=db,
                        )
                except Exception:
                    pass  # Don't fail if notification fails

                # Handle auto_off_after - power off printer if requested (after cooldown)
                if queue_item.auto_off_after:
                    result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
                    plug = result.scalar_one_or_none()
                    if plug and plug.enabled:
                        logger.info(f"Auto-off requested for printer {printer_id}, waiting for cooldown...")

                        async def cooldown_and_poweroff(pid: int, plug_id: int):
                            # Wait for nozzle to cool down
                            await printer_manager.wait_for_cooldown(pid, target_temp=50.0, timeout=600)
                            # Re-fetch plug in new session
                            async with async_session() as new_db:
                                result = await new_db.execute(select(SmartPlug).where(SmartPlug.id == plug_id))
                                p = result.scalar_one_or_none()
                                if p and p.enabled:
                                    success = await tasmota_service.turn_off(p)
                                    if success:
                                        logger.info(f"Powered off printer {pid} via smart plug '{p.name}'")
                                    else:
                                        logger.warning(f"Failed to power off printer {pid} via smart plug")

                        asyncio.create_task(cooldown_and_poweroff(printer_id, plug.id))
    except Exception as e:
        import logging

        logging.getLogger(__name__).warning(f"Queue item update failed: {e}")

    log_timing("Queue item update")
    logger.info(f"[CALLBACK] on_print_complete finished for printer {printer_id}, archive {archive_id}")


# AMS sensor history recording
_ams_history_task: asyncio.Task | None = None
AMS_HISTORY_INTERVAL = 300  # Record every 5 minutes
AMS_HISTORY_RETENTION_DAYS = 30  # Keep data for 30 days
_ams_cleanup_counter = 0  # Track recordings to trigger periodic cleanup
_ams_alarm_cooldown: dict[str, datetime] = {}  # Track alarm cooldowns (printer_id:ams_id:type -> last_alarm_time)
AMS_ALARM_COOLDOWN_MINUTES = 60  # Don't send same alarm more than once per hour


async def record_ams_history():
    """Background task to record AMS humidity and temperature data."""
    import logging

    logger = logging.getLogger(__name__)

    # Wait a short time for MQTT connections to establish on startup
    await asyncio.sleep(10)

    while True:
        try:
            from backend.app.models.ams_history import AMSSensorHistory
            from backend.app.models.printer import Printer
            from backend.app.models.settings import Settings

            async with async_session() as db:
                # Get all active printers
                result = await db.execute(select(Printer).where(Printer.is_active.is_(True)))
                printers = result.scalars().all()

                # Get alarm thresholds from settings
                humidity_threshold = 60.0  # Default: fair threshold
                temp_threshold = 35.0  # Default: fair threshold
                result = await db.execute(select(Settings).where(Settings.key == "ams_humidity_fair"))
                setting = result.scalar_one_or_none()
                if setting:
                    try:
                        humidity_threshold = float(setting.value)
                    except (ValueError, TypeError):
                        pass
                result = await db.execute(select(Settings).where(Settings.key == "ams_temp_fair"))
                setting = result.scalar_one_or_none()
                if setting:
                    try:
                        temp_threshold = float(setting.value)
                    except (ValueError, TypeError):
                        pass

                recorded_count = 0
                for printer in printers:
                    # Get current state from printer manager
                    state = printer_manager.get_status(printer.id)
                    if not state or not state.connected or not state.raw_data:
                        continue  # Skip disconnected printers - don't use stale data

                    raw_data = state.raw_data
                    if "ams" not in raw_data or not isinstance(raw_data["ams"], list):
                        continue

                    # Record data for each AMS unit
                    for ams_data in raw_data["ams"]:
                        ams_id = int(ams_data.get("id", 0))

                        # Get humidity (prefer humidity_raw)
                        humidity_raw = ams_data.get("humidity_raw")
                        humidity_idx = ams_data.get("humidity")
                        humidity = None
                        if humidity_raw is not None:
                            try:
                                humidity = float(humidity_raw)
                            except (ValueError, TypeError):
                                pass
                        if humidity is None and humidity_idx is not None:
                            try:
                                humidity = float(humidity_idx)
                            except (ValueError, TypeError):
                                pass

                        # Get temperature
                        temperature = None
                        temp_str = ams_data.get("temp")
                        if temp_str is not None:
                            try:
                                temperature = float(temp_str)
                            except (ValueError, TypeError):
                                pass

                        # Skip if no data
                        if humidity is None and temperature is None:
                            continue

                        # Record the data point
                        history = AMSSensorHistory(
                            printer_id=printer.id,
                            ams_id=ams_id,
                            humidity=humidity,
                            humidity_raw=float(humidity_raw) if humidity_raw else None,
                            temperature=temperature,
                        )
                        db.add(history)
                        recorded_count += 1

                        # Generate AMS label and determine if it's AMS-HT (A, B, C, D or HT-A for AMS-Lite/Hub)
                        is_ams_ht = ams_id >= 128
                        if is_ams_ht:
                            ams_label = f"HT-{chr(65 + (ams_id - 128))}"
                        else:
                            ams_label = f"AMS-{chr(65 + ams_id)}"

                        # Check humidity alarm (only if above threshold)
                        if humidity is not None and humidity > humidity_threshold:
                            cooldown_key = f"{printer.id}:{ams_id}:humidity"
                            last_alarm = _ams_alarm_cooldown.get(cooldown_key)
                            now = datetime.now()
                            if (
                                last_alarm is None
                                or (now - last_alarm).total_seconds() >= AMS_ALARM_COOLDOWN_MINUTES * 60
                            ):
                                _ams_alarm_cooldown[cooldown_key] = now
                                logger.info(
                                    f"Sending humidity alarm for {printer.name} {ams_label}: {humidity}% > {humidity_threshold}%"
                                )
                                try:
                                    # Call different notification method based on AMS type
                                    if is_ams_ht:
                                        await notification_service.on_ams_ht_humidity_high(
                                            printer.id, printer.name, ams_label, humidity, humidity_threshold, db
                                        )
                                    else:
                                        await notification_service.on_ams_humidity_high(
                                            printer.id, printer.name, ams_label, humidity, humidity_threshold, db
                                        )
                                except Exception as e:
                                    logger.warning(f"Failed to send humidity alarm: {e}")

                        # Check temperature alarm (only if above threshold)
                        if temperature is not None and temperature > temp_threshold:
                            cooldown_key = f"{printer.id}:{ams_id}:temperature"
                            last_alarm = _ams_alarm_cooldown.get(cooldown_key)
                            now = datetime.now()
                            if (
                                last_alarm is None
                                or (now - last_alarm).total_seconds() >= AMS_ALARM_COOLDOWN_MINUTES * 60
                            ):
                                _ams_alarm_cooldown[cooldown_key] = now
                                logger.info(
                                    f"Sending temperature alarm for {printer.name} {ams_label}: {temperature}°C > {temp_threshold}°C"
                                )
                                try:
                                    # Call different notification method based on AMS type
                                    if is_ams_ht:
                                        await notification_service.on_ams_ht_temperature_high(
                                            printer.id, printer.name, ams_label, temperature, temp_threshold, db
                                        )
                                    else:
                                        await notification_service.on_ams_temperature_high(
                                            printer.id, printer.name, ams_label, temperature, temp_threshold, db
                                        )
                                except Exception as e:
                                    logger.warning(f"Failed to send temperature alarm: {e}")

                await db.commit()
                if recorded_count > 0:
                    logger.info(f"Recorded {recorded_count} AMS sensor history entries")

                # Periodic cleanup of old data (every ~288 recordings = ~24 hours at 5min interval)
                global _ams_cleanup_counter
                _ams_cleanup_counter += 1
                if _ams_cleanup_counter >= 288:
                    _ams_cleanup_counter = 0
                    # Get retention days from settings
                    from backend.app.models.settings import Settings

                    result = await db.execute(select(Settings).where(Settings.key == "ams_history_retention_days"))
                    setting = result.scalar_one_or_none()
                    retention_days = int(setting.value) if setting else AMS_HISTORY_RETENTION_DAYS

                    cutoff = datetime.now() - timedelta(days=retention_days)
                    result = await db.execute(delete(AMSSensorHistory).where(AMSSensorHistory.recorded_at < cutoff))
                    await db.commit()
                    if result.rowcount > 0:
                        logger.info(
                            f"Cleaned up {result.rowcount} old AMS sensor history entries (older than {retention_days} days)"
                        )

            # Wait until next recording interval
            await asyncio.sleep(AMS_HISTORY_INTERVAL)

        except asyncio.CancelledError:
            break
        except Exception as e:
            logger.warning(f"AMS history recording failed: {e}")
            await asyncio.sleep(60)  # Wait a bit before retrying


def start_ams_history_recording():
    """Start the AMS history recording background task."""
    global _ams_history_task
    if _ams_history_task is None:
        _ams_history_task = asyncio.create_task(record_ams_history())
        logging.getLogger(__name__).info("AMS history recording started")


def stop_ams_history_recording():
    """Stop the AMS history recording background task."""
    global _ams_history_task
    if _ams_history_task:
        _ams_history_task.cancel()
        _ams_history_task = None
        logging.getLogger(__name__).info("AMS history recording stopped")


# Printer runtime tracking
_runtime_tracking_task: asyncio.Task | None = None
RUNTIME_TRACKING_INTERVAL = 30  # Update every 30 seconds


async def track_printer_runtime():
    """Background task to track printer active runtime (RUNNING/PAUSE states)."""
    import logging

    logger = logging.getLogger(__name__)

    # Wait for MQTT connections to establish on startup
    await asyncio.sleep(15)

    while True:
        try:
            from backend.app.models.printer import Printer

            async with async_session() as db:
                # Get all active printers
                result = await db.execute(select(Printer).where(Printer.is_active.is_(True)))
                printers = result.scalars().all()

                now = datetime.now()
                updated_count = 0

                needs_commit = False

                for printer in printers:
                    # Get current state from printer manager
                    state = printer_manager.get_status(printer.id)
                    if not state:
                        logger.debug(f"[{printer.name}] Runtime tracking: no state available")
                        continue
                    if not state.connected:
                        logger.debug(f"[{printer.name}] Runtime tracking: not connected")
                        continue

                    # Check if printer is in an active state (RUNNING or PAUSE)
                    if state.state in ("RUNNING", "PAUSE"):
                        # Calculate time since last update
                        if printer.last_runtime_update:
                            elapsed = (now - printer.last_runtime_update).total_seconds()
                            if elapsed > 0:
                                printer.runtime_seconds += int(elapsed)
                                updated_count += 1
                                needs_commit = True
                                logger.debug(
                                    f"[{printer.name}] Runtime tracking: added {int(elapsed)}s, "
                                    f"total={printer.runtime_seconds}s ({printer.runtime_seconds / 3600:.2f}h)"
                                )
                        else:
                            # First time seeing printer active - need to commit to save timestamp
                            needs_commit = True
                            logger.debug(f"[{printer.name}] Runtime tracking: first active detection")

                        printer.last_runtime_update = now
                    else:
                        # Printer is idle/offline - clear last_runtime_update
                        if printer.last_runtime_update is not None:
                            logger.debug(
                                f"[{printer.name}] Runtime tracking: state={state.state}, clearing last_runtime_update"
                            )
                            printer.last_runtime_update = None
                            needs_commit = True

                if needs_commit:
                    await db.commit()
                    if updated_count > 0:
                        logger.debug(f"Updated runtime for {updated_count} printer(s)")

        except asyncio.CancelledError:
            logger.info("Runtime tracking cancelled")
            break
        except Exception as e:
            logger.warning(f"Runtime tracking failed: {e}")

        await asyncio.sleep(RUNTIME_TRACKING_INTERVAL)


def start_runtime_tracking():
    """Start the printer runtime tracking background task."""
    global _runtime_tracking_task
    if _runtime_tracking_task is None:
        _runtime_tracking_task = asyncio.create_task(track_printer_runtime())
        logging.getLogger(__name__).info("Printer runtime tracking started")


def stop_runtime_tracking():
    """Stop the printer runtime tracking background task."""
    global _runtime_tracking_task
    if _runtime_tracking_task:
        _runtime_tracking_task.cancel()
        _runtime_tracking_task = None
        logging.getLogger(__name__).info("Printer runtime tracking stopped")


@asynccontextmanager
async def lifespan(app: FastAPI):
    # Startup
    await init_db()

    # Restore debug logging state from previous session
    await init_debug_logging()

    # Set up printer manager callbacks
    loop = asyncio.get_event_loop()
    printer_manager.set_event_loop(loop)
    printer_manager.set_status_change_callback(on_printer_status_change)
    printer_manager.set_print_start_callback(on_print_start)
    printer_manager.set_print_complete_callback(on_print_complete)
    printer_manager.set_ams_change_callback(on_ams_change)

    # Layer change callback for external camera timelapse
    async def on_layer_change(printer_id: int, layer_num: int):
        """Capture timelapse frame on layer change."""
        from backend.app.services.layer_timelapse import on_layer_change as tl_layer_change

        await tl_layer_change(printer_id, layer_num)

    printer_manager.set_layer_change_callback(on_layer_change)

    # Initialize MQTT relay from settings
    async with async_session() as db:
        from backend.app.api.routes.settings import get_setting

        mqtt_settings = {
            "mqtt_enabled": (await get_setting(db, "mqtt_enabled") or "false") == "true",
            "mqtt_broker": await get_setting(db, "mqtt_broker") or "",
            "mqtt_port": int(await get_setting(db, "mqtt_port") or "1883"),
            "mqtt_username": await get_setting(db, "mqtt_username") or "",
            "mqtt_password": await get_setting(db, "mqtt_password") or "",
            "mqtt_topic_prefix": await get_setting(db, "mqtt_topic_prefix") or "bambuddy",
            "mqtt_use_tls": (await get_setting(db, "mqtt_use_tls") or "false") == "true",
        }
        await mqtt_relay.configure(mqtt_settings)

    # Connect to all active printers
    async with async_session() as db:
        await init_printer_connections(db)

    # Auto-connect to Spoolman if enabled
    async with async_session() as db:
        from backend.app.api.routes.settings import get_setting

        spoolman_enabled = await get_setting(db, "spoolman_enabled")
        spoolman_url = await get_setting(db, "spoolman_url")

        if spoolman_enabled and spoolman_enabled.lower() == "true" and spoolman_url:
            try:
                client = await init_spoolman_client(spoolman_url)
                if await client.health_check():
                    logging.info(f"Auto-connected to Spoolman at {spoolman_url}")
                    # Ensure the 'tag' extra field exists for RFID/UUID storage
                    await client.ensure_tag_extra_field()
                else:
                    logging.warning(f"Spoolman at {spoolman_url} is not reachable")
            except Exception as e:
                logging.warning(f"Failed to auto-connect to Spoolman: {e}")

    # Start the print scheduler
    asyncio.create_task(print_scheduler.run())

    # Start the smart plug scheduler for time-based on/off
    smart_plug_manager.start_scheduler()

    # Resume any pending auto-offs that were interrupted by restart
    await smart_plug_manager.resume_pending_auto_offs()

    # Start the notification digest scheduler
    notification_service.start_digest_scheduler()

    # Start the GitHub backup scheduler
    await github_backup_service.start_scheduler()

    # Start AMS history recording
    start_ams_history_recording()

    # Start printer runtime tracking
    start_runtime_tracking()

    # Initialize virtual printer manager
    from backend.app.services.virtual_printer import virtual_printer_manager

    virtual_printer_manager.set_session_factory(async_session)

    # Auto-start virtual printer if enabled
    async with async_session() as db:
        from backend.app.api.routes.settings import get_setting

        vp_enabled = await get_setting(db, "virtual_printer_enabled")
        if vp_enabled and vp_enabled.lower() == "true":
            vp_access_code = await get_setting(db, "virtual_printer_access_code") or ""
            vp_mode = await get_setting(db, "virtual_printer_mode") or "immediate"
            vp_model = await get_setting(db, "virtual_printer_model") or ""

            if vp_access_code:
                try:
                    await virtual_printer_manager.configure(
                        enabled=True,
                        access_code=vp_access_code,
                        mode=vp_mode,
                        model=vp_model,
                    )
                    logging.info(f"Virtual printer started (model={vp_model or 'default'})")
                except Exception as e:
                    logging.warning(f"Failed to start virtual printer: {e}")

    yield

    # Shutdown
    print_scheduler.stop()
    smart_plug_manager.stop_scheduler()
    notification_service.stop_digest_scheduler()
    github_backup_service.stop_scheduler()
    stop_ams_history_recording()
    stop_runtime_tracking()
    printer_manager.disconnect_all()
    await close_spoolman_client()

    # Stop virtual printer if running
    if virtual_printer_manager.is_enabled:
        await virtual_printer_manager.configure(enabled=False)


app = FastAPI(
    title=app_settings.app_name,
    description="Archive and manage Bambu Lab 3MF files",
    version=APP_VERSION,
    lifespan=lifespan,
)

# API routes
app.include_router(auth.router, prefix=app_settings.api_prefix)
app.include_router(users.router, prefix=app_settings.api_prefix)
app.include_router(groups.router, prefix=app_settings.api_prefix)
app.include_router(printers.router, prefix=app_settings.api_prefix)
app.include_router(archives.router, prefix=app_settings.api_prefix)
app.include_router(filaments.router, prefix=app_settings.api_prefix)
app.include_router(settings_routes.router, prefix=app_settings.api_prefix)
app.include_router(cloud.router, prefix=app_settings.api_prefix)
app.include_router(smart_plugs.router, prefix=app_settings.api_prefix)
app.include_router(print_queue.router, prefix=app_settings.api_prefix)
app.include_router(kprofiles.router, prefix=app_settings.api_prefix)
app.include_router(notifications.router, prefix=app_settings.api_prefix)
app.include_router(notification_templates.router, prefix=app_settings.api_prefix)
app.include_router(spoolman.router, prefix=app_settings.api_prefix)
app.include_router(updates.router, prefix=app_settings.api_prefix)
app.include_router(maintenance.router, prefix=app_settings.api_prefix)
app.include_router(camera.router, prefix=app_settings.api_prefix)
app.include_router(external_links.router, prefix=app_settings.api_prefix)
app.include_router(projects.router, prefix=app_settings.api_prefix)
app.include_router(library.router, prefix=app_settings.api_prefix)
app.include_router(api_keys.router, prefix=app_settings.api_prefix)
app.include_router(webhook.router, prefix=app_settings.api_prefix)
app.include_router(ams_history.router, prefix=app_settings.api_prefix)
app.include_router(system.router, prefix=app_settings.api_prefix)
app.include_router(support.router, prefix=app_settings.api_prefix)
app.include_router(websocket.router, prefix=app_settings.api_prefix)
app.include_router(discovery.router, prefix=app_settings.api_prefix)
app.include_router(pending_uploads.router, prefix=app_settings.api_prefix)
app.include_router(firmware.router, prefix=app_settings.api_prefix)
app.include_router(github_backup.router, prefix=app_settings.api_prefix)
app.include_router(metrics.router, prefix=app_settings.api_prefix)


# Serve static files (React build)
if app_settings.static_dir.exists() and any(app_settings.static_dir.iterdir()):
    app.mount(
        "/assets",
        StaticFiles(directory=app_settings.static_dir / "assets"),
        name="assets",
    )
    if (app_settings.static_dir / "img").exists():
        app.mount(
            "/img",
            StaticFiles(directory=app_settings.static_dir / "img"),
            name="img",
        )
    if (app_settings.static_dir / "icons").exists():
        app.mount(
            "/icons",
            StaticFiles(directory=app_settings.static_dir / "icons"),
            name="icons",
        )


@app.get("/")
async def serve_frontend():
    """Serve the React frontend."""
    index_file = app_settings.static_dir / "index.html"
    if index_file.exists():
        return FileResponse(index_file)
    return {
        "message": "Bambuddy API",
        "docs": "/docs",
        "frontend": "Build and place React app in /static directory",
    }


@app.get("/health")
async def health_check():
    """Health check endpoint."""
    return {"status": "healthy"}


@app.get("/manifest.json")
async def serve_manifest():
    """Serve PWA manifest."""
    manifest_file = app_settings.static_dir / "manifest.json"
    if manifest_file.exists():
        return FileResponse(manifest_file, media_type="application/manifest+json")
    return {"error": "Manifest not found"}


@app.get("/sw.js")
async def serve_service_worker():
    """Serve service worker."""
    sw_file = app_settings.static_dir / "sw.js"
    if sw_file.exists():
        return FileResponse(sw_file, media_type="application/javascript")
    return {"error": "Service worker not found"}


# Catch-all route for React Router (must be last)
@app.get("/{full_path:path}")
async def serve_spa(full_path: str):
    """Serve React app for client-side routing."""
    # Don't intercept API routes - raise proper 404 so FastAPI can handle redirects
    if full_path.startswith("api/"):
        from fastapi import HTTPException

        raise HTTPException(status_code=404, detail="Not found")

    index_file = app_settings.static_dir / "index.html"
    if index_file.exists():
        return FileResponse(index_file)

    return {"error": "Frontend not built"}