| .. |
|
git_providers
|
306b9ba7fd
Accept Forgejo tokens scoped to a single repository (#2775)
|
2 kuukautta sitten |
|
model_providers
|
ce9853c056
fix(printing): a plate check that could not run says so; the archive recovery download follows the file size; an unconfirmed upload is read back; broken MakerWorld downloads are refused; bulk-edit toast reflects the result; CallMeBot values are encoded
|
4 päivää sitten |
|
virtual_printer
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
__init__.py
|
09677861ba
Added screenshots
|
10 kuukautta sitten |
|
ams_assignment_lock.py
|
5b34997dfa
fix(inventory): hand assign, unassign and add-from-slot wait for the printer's slot lock; the AMS remain sync and a print's usage no longer overwrite a weight set by hand or weighed meanwhile; a spool deleted while a print is charged is skipped
|
3 päivää sitten |
|
ams_slot_presence.py
|
905bda4f3f
fix(ams): read the firmware presence bit, not the tray state (issue #3084)
|
1 kuukausi sitten |
|
announcements.py
|
3fae2b402b
Announcements: history, collapsed list, instant refresh, footer icon
|
3 viikkoa sitten |
|
archive.py
|
bd692ac3c7
fix(stats): date filters use calendar days in the browser's time zone instead of UTC days; the Statistics page sends its zone, and the date-filtered archive, statistics and inventory-statistics endpoints take an optional tz (Bambuddy's own TZ when omitted)
|
2 päivää sitten |
|
archive_comparison.py
|
f43be8098e
Security hardening (maziggy/bambuddy-security #29)
|
1 viikko sitten |
|
archive_cost_estimate.py
|
ac4806f029
fix: a failed first run no longer leaves the archive at its partial cost (built-in inventory); completion stops the start cost estimate before writing the real cost; 2FA/SSO logins report LDAP/OIDC users' auth source; a fault in both print_error and HMS is listed once; a refused H2D load's tray target expires; refused K-profile re-applies are logged; the cloud filament-name map is fetched once per account without holding a DB connection; the library edit route refuses folder changes across the external boundary; a slow slice-progress answer is not reported as an unreachable sidecar
|
2 päivää sitten |
|
archive_purge.py
|
0033001945
fix(db): SQLite applies the ON DELETE rules of archives, library files, queue jobs, batches and projects
|
1 viikko sitten |
|
backup_path.py
|
5bbfeefa65
fix(backup): diagnose an unwritable backup path instead of quoting errno 30 (#2544)
|
3 kuukautta sitten |
|
bambu_cloud.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
bambu_cloud_credentials.py
|
036f0a688f
Merge pull request #2845 from pascalheidmann/refactor/modular-import
|
1 kuukausi sitten |
|
bambu_ftp.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
bambu_mqtt.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
bug_report.py
|
346b58ed8f
fix(settings): printer temperature history retention gets a setting; no retention can wipe history; bug reports keep no email
|
4 päivää sitten |
|
camera.py
|
d3827e646a
Security hardening (maziggy/bambuddy-security #23)
|
1 viikko sitten |
|
camera_diagnose.py
|
a735f8c43a
chore: Python 3.11 is the minimum, and the installer finds or installs it
|
1 viikko sitten |
|
camera_fanout.py
|
31888777ae
fix(camera): external cameras share one stream per printer
|
5 päivää sitten |
|
camera_light.py
|
cf0ba31f19
fix(camera): the plate check holds the chamber light like other camera uses, so a live view opened meanwhile keeps it; captures use the live frame of a watched single-client external camera; a reconnecting X1C live view is not ended by the cleanup; camera test/diagnose/plate routes release their DB connection before capturing
|
2 päivää sitten |
|
camera_profiles.py
|
2315b8fb5d
Count camera reconnects in a row, not for the life of the stream
|
3 viikkoa sitten |
|
color_catalog_lookup.py
|
cb924e5c4a
Match a Bambu roll to its own product line, not just its colour (issue #2907) (#2944)
|
3 viikkoa sitten |
|
design_settings.py
|
7e77bf5833
Take the layer height from the plate that actually printed
|
2 kuukautta sitten |
|
diagnostic_snapshot.py
|
a735f8c43a
chore: Python 3.11 is the minimum, and the installer finds or installs it
|
1 viikko sitten |
|
discovery.py
|
3a5f802cdc
fix(diagnostics): read the subnet the host is actually on (issue #3092)
|
1 kuukausi sitten |
|
drying_preflight.py
|
b04d753186
(Post work): parked AMS drying timers and translated drying failures (issue #2896)
|
3 viikkoa sitten |
|
email_service.py
|
afdd950b63
Security hardening (maziggy/bambuddy-security #15)
|
1 viikko sitten |
|
energy_plug.py
|
1de2d51634
fix(smart-plugs): Home Assistant scripts linked to a printer run when Bambuddy switches its power plug off or on by schedule, not only by hand
|
4 päivää sitten |
|
energy_price.py
|
b596b55456
Take the electricity price from Home Assistant and cost energy hour by hour (#1251)
|
2 viikkoa sitten |
|
export.py
|
6c8a821bca
Add a wear cost per printing hour to printers (#694)
|
2 viikkoa sitten |
|
external_camera.py
|
2443cea174
feat: USB cameras are picked from a list of detected devices (refresh, not-found marking, manual fallback, Docker hint; device listing off the event loop, /dev/video0-99 only); fix: timelapse editor saves as a background job with progress and cancel (ffmpeg stopped on cancel, no overwrite of a timelapse removed or replaced meanwhile, ffprobe/thumbnail timeouts), and the music volume is applied
|
1 päivä sitten |
|
failure_analysis.py
|
bd692ac3c7
fix(stats): date filters use calendar days in the browser's time zone instead of UTC days; the Statistics page sends its zone, and the date-filtered archive, statistics and inventory-statistics endpoints take an optional tz (Bambuddy's own TZ when omitted)
|
2 päivää sitten |
|
filament_deficit.py
|
5649f836da
fix(spoolman): the print dialog's cost estimate and each slot's grams left come from the spool bound to the slot, priced the way the print is charged, instead of the built-in assignments; they refresh when a slot's assignment changes
|
2 päivää sitten |
|
filament_requirements.py
|
3954d3a7e6
Choose which rack nozzle each filament prints from on an H2C (#1784)
|
2 kuukautta sitten |
|
finance_balance.py
|
c39e678204
Security hardening (maziggy/bambuddy-security #12)
|
1 viikko sitten |
|
finance_billing.py
|
b2ed37b6c3
fix(finance): a print whose user was deleted while it ran is billed to its cost centre
|
1 viikko sitten |
|
finance_budget.py
|
f761a3ae97
fix(queue): every way of adding a job announces it, applies the default print options and keeps its cost centre
|
5 päivää sitten |
|
finance_defaults.py
|
4a85e033c0
fix(finance): show the currency the install is configured for (issue #3123)
|
1 kuukausi sitten |
|
firmware_check.py
|
ae3c27f3df
fix(firmware): log an unreachable Bambu Lab site once, not on every firmware check
|
1 viikko sitten |
|
firmware_update.py
|
770c6bfdf9
fix: firmware upload only for idle printers (dialog, server, re-check after download, queue waits during upload); AMS Reset Slot asks first and is refused while printing; confirms for shopping list Clear all, Git history Clear and SSO unlink (last SSO link of an account without password stays); LDAP/SMTP test use the form's values; emptying a user's email removes it; local backup delete errors are shown; removed the unreachable printer-card Spoolman link/unlink
|
2 päivää sitten |
|
ftp_profiles.py
|
cc39acfc74
Ask a printer that refuses FTPS what it actually said (issue #2780)
|
2 kuukautta sitten |
|
github_backup.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
github_restore.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
ha_sensor_manager.py
|
54af3146a3
[Feature]: Bind Home Assistant sensors to storage locations (dryboxes/bins) (#2827)
|
1 kuukausi sitten |
|
hms_actions.py
|
3ddf8d847e
[Feature]: HMS Actions (#1743)
|
3 kuukautta sitten |
|
hms_errors.py
|
033eff1254
Show Bambu's own HMS descriptions and the real alert level (issue #2728)
|
3 viikkoa sitten |
|
homeassistant.py
|
d3827e646a
Security hardening (maziggy/bambuddy-security #23)
|
1 viikko sitten |
|
inventory_mode.py
|
08a58b1ef4
Keep both modes' slot assignments across an inventory mode switch (issue #2812)
|
1 kuukausi sitten |
|
kprofile_drift.py
|
578add28d8
fix(printers): a printer added after a delete starts clean
|
1 viikko sitten |
|
label_renderer.py
|
b5cd369f51
chore: remove dead code and fail CI on unused frontend files
|
1 viikko sitten |
|
layer_timelapse.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
ldap_service.py
|
29e6d28205
Resolve LDAP groups on lldap and OpenLDAP (#3197)
|
3 viikkoa sitten |
|
library_folder_access.py
|
6cdf4eb2d0
Tests: 21 in the new test_api_key_own_rows.py. Before the change, 8 of them failed; the rest pass either way because they check refusals and unchanged behaviour. All 7 mutations were killed. In the #3256 tests (test_api_key_queue_acts_as_owner.py), I tightened the bulk assertion and fixed the outdated docstring. The wiki's API keys page had documented the old refusal; that block is rewritten.
|
2 päivää sitten |
|
library_trash.py
|
a3ba9994fe
fix(queue): orders and groupings show as finished however their last job ended
|
6 päivää sitten |
|
local_backup.py
|
5bbfeefa65
fix(backup): diagnose an unwritable backup path instead of quoting errno 30 (#2544)
|
3 kuukautta sitten |
|
location_ha_sensor_manager.py
|
54af3146a3
[Feature]: Bind Home Assistant sensors to storage locations (dryboxes/bins) (#2827)
|
1 kuukausi sitten |
|
location_service.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
log_health.py
|
604fa44593
Explain Bambu Cloud's CAPTCHA challenge instead of repeating it (#2790)
|
2 kuukautta sitten |
|
log_reader.py
|
a51283ad76
Security hardening (maziggy/bambuddy-security #19)
|
1 viikko sitten |
|
long_lived_tokens.py
|
258db95483
fix(overlay): authenticate the OBS overlay with a token when login is enabled (#2613)
|
3 kuukautta sitten |
|
loop_watchdog.py
|
774eba73c8
feat(diagnostics): event-loop stall watchdog to catch silent backend freezes
|
5 kuukautta sitten |
|
material_number.py
|
71d4b2f70d
Material number as a first-class spool field (#2994)
|
3 viikkoa sitten |
|
mesh_combine.py
|
b67c9b572c
Add "Combine to 3MF" for slicing several STLs on one plate (#3162)
|
3 viikkoa sitten |
|
mqtt_relay.py
|
dbb560dfb6
fix(mqtt-relay): publish the documented events, from every place they happen
|
1 viikko sitten |
|
mqtt_smart_plug.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
network_utils.py
|
b5cd369f51
chore: remove dead code and fail CI on unused frontend files
|
1 viikko sitten |
|
notification_service.py
|
dad7fea37b
fix(notifications): the daily digest goes out during quiet hours and a failed one keeps its events for the next (dropped after two days); a deleted queued archive no longer leaves its creator to be named on a later print; a print closed at reconnect reports no actual duration; the template editor knows the print outcome confirmation and names every event
|
2 päivää sitten |
|
notify_client.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
notify_live_activities.py
|
578add28d8
fix(printers): a printer added after a delete starts clean
|
1 viikko sitten |
|
notify_widgets.py
|
b42d39ffcc
Add native Notify! alerts, Live Activities and Lock Screen widgets (#3265)
|
1 viikko sitten |
|
notify_worker.py
|
b42d39ffcc
Add native Notify! alerts, Live Activities and Lock Screen widgets (#3265)
|
1 viikko sitten |
|
obico_actions.py
|
1de2d51634
fix(smart-plugs): Home Assistant scripts linked to a printer run when Bambuddy switches its power plug off or on by schedule, not only by hand
|
4 päivää sitten |
|
obico_detection.py
|
578add28d8
fix(printers): a printer added after a delete starts clean
|
1 viikko sitten |
|
obico_smoothing.py
|
eec7793955
feat(obico): AI print-failure detection via self-hosted Obico ML API (#172)
|
6 kuukautta sitten |
|
oidc_group_sync.py
|
45921b7a56
Limit groups to selected printers (issue #1727)
|
3 viikkoa sitten |
|
oidc_icon.py
|
8a7598f6b5
feat(auth): proxy OIDC provider icons server-side (#1333) (#1342)
|
5 kuukautta sitten |
|
opentag3d.py
|
b30a283184
Feature/spoolman inventory UI (#1241)
|
5 kuukautta sitten |
|
orca_cloud.py
|
00251fe808
feat(orca-cloud): pair via RFC 8628 device flow, replacing the paste-based sign-in
|
3 kuukautta sitten |
|
orca_profiles.py
|
330d77198a
Fix AMS slot showing wrong material for "Support for" profiles
|
7 kuukautta sitten |
|
pdf_thumbnail.py
|
86bd9e1bd4
fix(file-manager): harden the merged previews - PDF.js legacy build, server PDF thumbnails, STEP progress (issue #2976)
|
3 viikkoa sitten |
|
pipeline_eligibility.py
|
918aa26ffa
fix(queue): models matched without regard to case when adding jobs and in pipelines, stored in the printers' spelling; webhook reprints reuse the slicer's AMS slots; a multi-plate file queued without a plate stores the plate that prints
|
3 päivää sitten |
|
pipeline_job_status.py
|
176161f0d2
fix(pipelines): a pipeline run remembers how each copy ended
|
1 viikko sitten |
|
plate_detection.py
|
ce9853c056
fix(printing): a plate check that could not run says so; the archive recovery download follows the file size; an unconfirmed upload is read back; broken MakerWorld downloads are refused; bulk-edit toast reflects the result; CallMeBot values are encoded
|
4 päivää sitten |
|
plate_thumbnail.py
|
bdbfa5d8fd
fix(library): STL thumbnails are made off the event loop, one at a time
|
5 päivää sitten |
|
plug_energy.py
|
47795649ae
fix(smart-plugs): power alerts are sent, checked in the background, once per crossing
|
1 viikko sitten |
|
plug_energy_history.py
|
aba00598bb
fix(smart-plugs): read a REST plug's lifetime counter, and derive Today/Yesterday from it (issue #2539)
|
3 kuukautta sitten |
|
power_alerts.py
|
47795649ae
fix(smart-plugs): power alerts are sent, checked in the background, once per crossing
|
1 viikko sitten |
|
preset_resolver.py
|
cf98daa0bb
Security hardening (maziggy/bambuddy-security #10)
|
2 viikkoa sitten |
|
print_batch.py
|
f761a3ae97
fix(queue): every way of adding a job announces it, applies the default print options and keeps its cost centre
|
5 päivää sitten |
|
print_confirmation.py
|
1c316e2ad6
Answer the outcome prompt by reacting to the Telegram message (#3129)
|
3 viikkoa sitten |
|
print_control.py
|
ab5ccc1082
fix(printers): a Stop on an idle printer no longer marks it as user-stopped, so a later failed print is not reported as cancelled; Configure Slot warns when a manual K value could not be sent; Skip Objects and the connection diagnostic release their DB connection before talking to the printer
|
2 päivää sitten |
|
print_cost_estimate.py
|
141ec5dbb3
fix(spoolman): failed prints are logged with their spool cost, queue estimates use Spoolman prices
|
6 päivää sitten |
|
print_defaults.py
|
f761a3ae97
fix(queue): every way of adding a job announces it, applies the default print options and keeps its cost centre
|
5 päivää sitten |
|
print_dispatch_context.py
|
db6cdb0745
fix(camera): take the finish photo when the print ends, not when its last layer starts (#2547)
|
2 kuukautta sitten |
|
print_log.py
|
461c3f045d
fix(archives): a cost set through the API or by Recalculate reaches the run that had it; edits during a reprint leave the previous run alone; archive cost bounded; a 422 survives Infinity/NaN
|
3 päivää sitten |
|
print_scheduler.py
|
770c6bfdf9
fix: firmware upload only for idle printers (dialog, server, re-check after download, queue waits during upload); AMS Reset Slot asks first and is refused while printing; confirms for shopping list Clear all, Git history Clear and SSO unlink (last SSO link of an account without password stays); LDAP/SMTP test use the form's values; emptying a user's email removes it; local backup delete errors are shown; removed the unreachable printer-card Spoolman link/unlink
|
2 päivää sitten |
|
print_storage.py
|
ebc72e1d41
fix(archives): keep the project name when the wrong-plate guard rejects a 3MF (issue #3126)
|
1 kuukausi sitten |
|
printer_diagnostic.py
|
a36c0009a5
fix(diagnostics): name the stalled step when a bundle's connection check times out (issue #3164)
|
3 viikkoa sitten |
|
printer_file_cache.py
|
026acaf511
fix(printers): the plate picker downloads a printer's 3MF once
|
5 päivää sitten |
|
printer_manager.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
printer_media.py
|
7a2fd80b91
fix(ftp): printer downloads stop at their deadline, fit the file's size and say what failed
|
5 päivää sitten |
|
process_overrides.py
|
f0500578bd
Edit the full print-parameter set from the slice dialog
|
2 kuukautta sitten |
|
queue_announcements.py
|
f761a3ae97
fix(queue): every way of adding a job announces it, applies the default print options and keeps its cost centre
|
5 päivää sitten |
|
queue_item_printer.py
|
2699bebc37
fix(queue): a job moved to another printer drops the old printer's settings
|
6 päivää sitten |
|
queue_position.py
|
e9627e44a2
Start queued jobs in list order, whether pinned or "Any <model>" (#3200)
|
3 viikkoa sitten |
|
rest_smart_plug.py
|
a51283ad76
Security hardening (maziggy/bambuddy-security #19)
|
1 viikko sitten |
|
secret_fields.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
slice_dispatch.py
|
6cdf4eb2d0
Tests: 21 in the new test_api_key_own_rows.py. Before the change, 8 of them failed; the rest pass either way because they check refusals and unchanged behaviour. All 7 mutations were killed. In the #3256 tests (test_api_key_queue_acts_as_owner.py), I tightened the bulk assertion and fixed the outdated docstring. The wiki's API keys page had documented the old refusal; that block is rewritten.
|
2 päivää sitten |
|
slice_output_check.py
|
4f10d15584
Record the colour a slice is actually printed in (issue #2977)
|
1 kuukausi sitten |
|
slice_preview.py
|
9a837d19a1
fix(slicer): strip zero-valued filament-index sentinels, and sanitise the preview slice too (issue #3030)
|
1 kuukausi sitten |
|
slicer_3mf_convert.py
|
83142c726c
fix(slice): report a finished slice once, not once per queued poll
|
2 kuukautta sitten |
|
slicer_api.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
slicer_filament_resolver.py
|
02e39b18b9
Configure Orca Cloud filaments with their own filament ID (#3216)
|
2 viikkoa sitten |
|
slot_kprofile.py
|
53ef17dc56
fix(spoolman): slot assignments are verified, and the spool's own preset is used for the slot
|
6 päivää sitten |
|
slot_nozzle.py
|
113f08a1a1
fix(printers): REST and WebSocket share the AMS serialiser, override picker sees both nozzles without an AMS
|
5 päivää sitten |
|
slot_preset_writer.py
|
02e39b18b9
Configure Orca Cloud filaments with their own filament ID (#3216)
|
2 viikkoa sitten |
|
slot_unlink_grace.py
|
3497cf0d46
Hold an automatic slot unlink until the slot stays empty (issue #3186)
|
3 viikkoa sitten |
|
smart_plug_manager.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
sponsor_prompt.py
|
31e61cebd7
feat(sponsor-prompt): lower print/archive/cost thresholds to fire for typical new installs
|
3 kuukautta sitten |
|
spool_assignment_notifications.py
|
08a58b1ef4
Keep both modes' slot assignments across an inventory mode switch (issue #2812)
|
1 kuukausi sitten |
|
spool_csv.py
|
5edbe7586d
fix(inventory): deleting a spool frees and announces its slots; scale, AMS and manual weight syncs and a finished print's usage refresh other tabs and the printer cards; a deleted printer's spool assignments go with it on SQLite; a pre-assigned slot the printer could not be told about is retried; CSV last_used is stored in UTC
|
3 päivää sitten |
|
spool_drying.py
|
84f320b859
Remember when each spool was last dried (#2863)
|
2 viikkoa sitten |
|
spool_filament_preset.py
|
53ef17dc56
fix(spoolman): slot assignments are verified, and the spool's own preset is used for the slot
|
6 päivää sitten |
|
spool_tag_matcher.py
|
23d04c8645
fix(inventory): archived or deleted spools release their AMS slots, safely in both modes
|
6 päivää sitten |
|
spoolbuddy_ssh.py
|
ba93abdb9d
fix(spoolbuddy): writing a sticker no longer replaces a Bambu spool's AMS link in Spoolman (refused with the reason on Spoolman before 0.27, and such spools are not listed as untagged); the colour-name warning only appears when the name is really missing; an update stops when installing dependencies times out instead of restarting the daemon and reporting success
|
2 päivää sitten |
|
spoolman.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
spoolman_slot_sync.py
|
fcc20cb62c
fix(spoolman): AMS syncs write only the slots whose spool they changed and keep a spool assigned meanwhile; the Sync buttons announce slot changes and update the slot preset; a new Spoolman spool is not seeded from leftover built-in assignments
|
3 päivää sitten |
|
spoolman_tracking.py
|
005b34af6d
deleted. Nothing would have been charged twice, but that printer would have looked mid-print to later spool archiving. It's closed using the "completion in progress"
|
2 päivää sitten |
|
stl_thumbnail.py
|
bdbfa5d8fd
fix(library): STL thumbnails are made off the event loop, one at a time
|
5 päivää sitten |
|
stock_forecast.py
|
318430f0f4
Give the two stock alerts something that fires them (issue #2955) (#3196)
|
3 viikkoa sitten |
|
supplier_links.py
|
053cfa73ad
Suppliers as a managed list with per-spool assignments (#2996)
|
3 viikkoa sitten |
|
tag_conflict.py
|
0db028f9e6
fix(inventory): one structured 409 for a tag another spool holds (issue #3110)
|
1 kuukausi sitten |
|
tasmota.py
|
3daae22f3d
Security hardening (maziggy/bambuddy-security #8)
|
2 kuukautta sitten |
|
telegram_reactions.py
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 päivä sitten |
|
timelapse_jobs.py
|
2443cea174
feat: USB cameras are picked from a list of detected devices (refresh, not-found marking, manual fallback, Docker hint; device listing off the event loop, /dev/video0-99 only); fix: timelapse editor saves as a background job with progress and cancel (ffmpeg stopped on cancel, no overwrite of a timelapse removed or replaced meanwhile, ffprobe/thumbnail timeouts), and the music volume is applied
|
1 päivä sitten |
|
timelapse_processor.py
|
2443cea174
feat: USB cameras are picked from a list of detected devices (refresh, not-found marking, manual fallback, Docker hint; device listing off the event loop, /dev/video0-99 only); fix: timelapse editor saves as a background job with progress and cancel (ffmpeg stopped on cancel, no overwrite of a timelapse removed or replaced meanwhile, ffprobe/thumbnail timeouts), and the music volume is applied
|
1 päivä sitten |
|
usage_tracker.py
|
ac4806f029
fix: a failed first run no longer leaves the archive at its partial cost (built-in inventory); completion stops the start cost estimate before writing the real cost; 2FA/SSO logins report LDAP/OIDC users' auth source; a fault in both print_error and HMS is listed once; a refused H2D load's tray target expires; refused K-profile re-applies are logged; the cloud filament-name map is fetched once per account without holding a DB connection; the library edit route refuses folder changes across the external boundary; a slow slice-progress answer is not reported as an unreachable sidecar
|
2 päivää sitten |
maziggy
2443cea174
feat: USB cameras are picked from a list of detected devices (refresh, not-found marking, manual fallback, Docker hint; device listing off the event loop, /dev/video0-99 only); fix: timelapse editor saves as a background job with progress and cancel (ffmpeg stopped on cancel, no overwrite of a timelapse removed or replaced meanwhile, ffprobe/thumbnail timeouts), and the music volume is applied