Etusivu Tutki Apua
Kirjaudu sisään
yunoadmin
/
bambuddy
peilaus alkaen https://github.com/maziggy/bambuddy
1
0
Haarauta 0
Tiedostot Esitykset 0 Wiki
Puu: 69ca44a7bd
Haarat Tunnisteet
bambuddy
/
logs
/
32f2f136e4ea4eb9b0c0d55ca0a869af.log

32f2f136e4ea4eb9b0c0d55ca0a869af.log 33 KB
Historia Raaka

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-10-01 01:33:39,173 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    2. 

  2. 2026-10-01 01:33:39,173 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    3. 

  3. 2026-10-01 01:33:39,174 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 28.0
    4. 

  4. 2026-10-01 01:33:39,174 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    5. 

  5. 2026-10-01 01:33:39,174 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    6. 

  6. 2026-10-01 01:33:39,175 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    7. 

  7. 2026-10-01 01:33:39,175 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    8. 

  8. 2026-10-01 01:33:39,309 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    9. 

  9. 2026-10-01 01:33:39,309 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    10. 

  10. 2026-10-01 01:33:39,309 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    11. 

  11. 2026-10-01 01:33:39,310 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    12. 

  12. 2026-10-01 01:33:39,310 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    13. 

  13. 2026-10-01 01:33:39,311 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    14. 

  14. 2026-10-01 01:33:39,311 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    15. 

  15. 2026-10-01 01:33:39,311 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    16. 

  16. 2026-10-01 01:33:39,312 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    17. 

  17. 2026-10-01 01:33:39,312 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    18. 

  18. 2026-10-01 01:33:39,573 INFO [uvicorn.access] [-] [IP]:42486 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    19. 

  19. 2026-10-01 01:33:39,665 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    20. 

  20. 2026-10-01 01:33:39,665 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    21. 

  21. 2026-10-01 01:33:39,665 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 1935530438.3mf
    22. 

  22. 2026-10-01 01:33:39,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    23. 

  23. 2026-10-01 01:33:39,666 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    24. 

  24. 2026-10-01 01:33:39,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    25. 

  25. 2026-10-01 01:33:39,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    26. 

  26. 2026-10-01 01:33:39,667 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    27. 

  27. 2026-10-01 01:33:39,668 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    28. 

  28. 2026-10-01 01:33:39,668 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 1935530438.3mf
    29. 

  29. 2026-10-01 01:33:40,175 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    30. 

  30. 2026-10-01 01:33:40,176 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    31. 

  31. 2026-10-01 01:33:40,176 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    32. 

  32. 2026-10-01 01:33:40,177 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    33. 

  33. 2026-10-01 01:33:40,177 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    34. 

  34. 2026-10-01 01:33:40,178 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 28.0
    35. 

  35. 2026-10-01 01:33:40,178 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    36. 

  36. 2026-10-01 01:33:40,178 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    37. 

  37. 2026-10-01 01:33:40,179 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    38. 

  38. 2026-10-01 01:33:40,179 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    39. 

  39. 2026-10-01 01:33:40,310 INFO [uvicorn.access] [-] [IP]:42496 - "POST /api/v1/spoolbuddy/devices/spoolbuddy-scale-3bplus/heartbeat HTTP/1.1" 200
    40. 

  40. 2026-10-01 01:33:40,320 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    41. 

  41. 2026-10-01 01:33:40,321 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    42. 

  42. 2026-10-01 01:33:40,321 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    43. 

  43. 2026-10-01 01:33:40,322 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    44. 

  44. 2026-10-01 01:33:40,322 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    45. 

  45. 2026-10-01 01:33:40,323 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    46. 

  46. 2026-10-01 01:33:40,323 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    47. 

  47. 2026-10-01 01:33:40,324 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    48. 

  48. 2026-10-01 01:33:40,325 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    49. 

  49. 2026-10-01 01:33:40,325 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    50. 

  50. 2026-10-01 01:33:40,675 INFO [uvicorn.access] [-] [IP]:42508 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    51. 

  51. 2026-10-01 01:33:40,681 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    52. 

  52. 2026-10-01 01:33:40,682 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    53. 

  53. 2026-10-01 01:33:40,682 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 1935530438.3mf
    54. 

  54. 2026-10-01 01:33:40,683 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    55. 

  55. 2026-10-01 01:33:40,684 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    56. 

  56. 2026-10-01 01:33:40,684 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    57. 

  57. 2026-10-01 01:33:40,685 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    58. 

  58. 2026-10-01 01:33:40,685 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    59. 

  59. 2026-10-01 01:33:40,686 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    60. 

  60. 2026-10-01 01:33:40,686 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 1935530438.3mf
    61. 

  61. 2026-10-01 01:33:40,810 DEBUG [backend.app.api.routes.printers] [6a31559a] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    62. 

  62. 2026-10-01 01:33:40,811 DEBUG [backend.app.api.routes.printers] [6a31559a] Using tray_now directly as global ID: 255
    63. 

  63. 2026-10-01 01:33:40,997 DEBUG [backend.app.api.routes.printers] [1d04e27d] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    64. 

  64. 2026-10-01 01:33:40,997 DEBUG [backend.app.api.routes.printers] [1d04e27d] Using tray_now directly as global ID: 0
    65. 

  65. 2026-10-01 01:33:41,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    66. 

  66. 2026-10-01 01:33:41,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    67. 

  67. 2026-10-01 01:33:41,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    68. 

  68. 2026-10-01 01:33:41,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    69. 

  69. 2026-10-01 01:33:41,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    70. 

  70. 2026-10-01 01:33:41,188 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 28.0
    71. 

  71. 2026-10-01 01:33:41,188 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    72. 

  72. 2026-10-01 01:33:41,189 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    73. 

  73. 2026-10-01 01:33:41,189 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    74. 

  74. 2026-10-01 01:33:41,192 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    75. 

  75. 2026-10-01 01:33:41,201 DEBUG [backend.app.api.routes.printers] [33f8b989] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    76. 

  76. 2026-10-01 01:33:41,202 DEBUG [backend.app.api.routes.printers] [33f8b989] Using tray_now directly as global ID: 3
    77. 

  77. 2026-10-01 01:33:41,332 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    78. 

  78. 2026-10-01 01:33:41,332 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    79. 

  79. 2026-10-01 01:33:41,332 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    80. 

  80. 2026-10-01 01:33:41,333 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    81. 

  81. 2026-10-01 01:33:41,333 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    82. 

  82. 2026-10-01 01:33:41,334 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    83. 

  83. 2026-10-01 01:33:41,334 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    84. 

  84. 2026-10-01 01:33:41,335 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    85. 

  85. 2026-10-01 01:33:41,335 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    86. 

  86. 2026-10-01 01:33:41,336 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    87. 

  87. 2026-10-01 01:33:41,655 INFO [uvicorn.access] [-] [IP]:42528 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    88. 

  88. 2026-10-01 01:33:41,705 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    89. 

  89. 2026-10-01 01:33:41,707 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    90. 

  90. 2026-10-01 01:33:41,708 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 1935530438.3mf
    91. 

  91. 2026-10-01 01:33:41,708 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    92. 

  92. 2026-10-01 01:33:41,709 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    93. 

  93. 2026-10-01 01:33:41,710 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    94. 

  94. 2026-10-01 01:33:41,710 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    95. 

  95. 2026-10-01 01:33:41,710 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    96. 

  96. 2026-10-01 01:33:41,712 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    97. 

  97. 2026-10-01 01:33:41,713 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 1935530438.3mf
    98. 

  98. 2026-10-01 01:33:41,900 DEBUG [backend.app.api.routes.printers] [ba4d3cde] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    99. 

  99. 2026-10-01 01:33:41,901 DEBUG [backend.app.api.routes.printers] [ba4d3cde] Using tray_now directly as global ID: 255
    100. 

  100. 2026-10-01 01:33:41,912 DEBUG [backend.app.api.routes.printers] [d001e9a7] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    101. 

  101. 2026-10-01 01:33:41,912 DEBUG [backend.app.api.routes.printers] [d001e9a7] Using tray_now directly as global ID: 3
    102. 

  102. 2026-10-01 01:33:41,916 DEBUG [backend.app.api.routes.printers] [33d81835] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    103. 

  103. 2026-10-01 01:33:41,917 DEBUG [backend.app.api.routes.printers] [33d81835] Using tray_now directly as global ID: 0
    104. 

  104. 2026-10-01 01:33:42,193 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    105. 

  105. 2026-10-01 01:33:42,194 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    106. 

  106. 2026-10-01 01:33:42,194 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    107. 

  107. 2026-10-01 01:33:42,195 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    108. 

  108. 2026-10-01 01:33:42,195 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    109. 

  109. 2026-10-01 01:33:42,195 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 28.0
    110. 

  110. 2026-10-01 01:33:42,197 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    111. 

  111. 2026-10-01 01:33:42,197 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    112. 

  112. 2026-10-01 01:33:42,198 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    113. 

  113. 2026-10-01 01:33:42,198 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    114. 

  114. 2026-10-01 01:33:42,279 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:39149
    115. 

  115. 2026-10-01 01:33:42,280 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    116. 

  116. 2026-10-01 01:33:42,346 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    117. 

  117. 2026-10-01 01:33:42,346 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    118. 

  118. 2026-10-01 01:33:42,347 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    119. 

  119. 2026-10-01 01:33:42,348 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    120. 

  120. 2026-10-01 01:33:42,348 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    121. 

  121. 2026-10-01 01:33:42,349 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    122. 

  122. 2026-10-01 01:33:42,349 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    123. 

  123. 2026-10-01 01:33:42,350 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    124. 

  124. 2026-10-01 01:33:42,351 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    125. 

  125. 2026-10-01 01:33:42,352 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    126. 

  126. 2026-10-01 01:33:42,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    127. 

  127. 2026-10-01 01:33:42,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    128. 

  128. 2026-10-01 01:33:42,743 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 1935530438.3mf
    129. 

  129. 2026-10-01 01:33:42,744 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    130. 

  130. 2026-10-01 01:33:42,745 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    131. 

  131. 2026-10-01 01:33:42,745 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    132. 

  132. 2026-10-01 01:33:42,746 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    133. 

  133. 2026-10-01 01:33:42,746 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    134. 

  134. 2026-10-01 01:33:42,747 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    135. 

  135. 2026-10-01 01:33:42,747 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 1935530438.3mf
    136. 

  136. 2026-10-01 01:33:42,816 INFO [uvicorn.access] [-] [IP]:57656 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    137. 

  137. 2026-10-01 01:33:43,213 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    138. 

  138. 2026-10-01 01:33:43,213 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    139. 

  139. 2026-10-01 01:33:43,213 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    140. 

  140. 2026-10-01 01:33:43,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    141. 

  141. 2026-10-01 01:33:43,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    142. 

  142. 2026-10-01 01:33:43,215 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 28.0
    143. 

  143. 2026-10-01 01:33:43,215 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    144. 

  144. 2026-10-01 01:33:43,215 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    145. 

  145. 2026-10-01 01:33:43,216 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    146. 

  146. 2026-10-01 01:33:43,216 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    147. 

  147. 2026-10-01 01:33:43,339 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    148. 

  148. 2026-10-01 01:33:43,339 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    149. 

  149. 2026-10-01 01:33:43,340 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    150. 

  150. 2026-10-01 01:33:43,340 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    151. 

  151. 2026-10-01 01:33:43,341 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    152. 

  152. 2026-10-01 01:33:43,341 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    153. 

  153. 2026-10-01 01:33:43,341 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    154. 

  154. 2026-10-01 01:33:43,342 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    155. 

  155. 2026-10-01 01:33:43,342 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    156. 

  156. 2026-10-01 01:33:43,343 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    157. 

  157. 2026-10-01 01:33:43,755 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    158. 

  158. 2026-10-01 01:33:43,756 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    159. 

  159. 2026-10-01 01:33:43,756 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 1935530438.3mf
    160. 

  160. 2026-10-01 01:33:43,757 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    161. 

  161. 2026-10-01 01:33:43,758 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    162. 

  162. 2026-10-01 01:33:43,758 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    163. 

  163. 2026-10-01 01:33:43,759 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    164. 

  164. 2026-10-01 01:33:43,760 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    165. 

  165. 2026-10-01 01:33:43,760 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    166. 

  166. 2026-10-01 01:33:43,761 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 1935530438.3mf
    167. 

  167. 2026-10-01 01:33:43,889 INFO [uvicorn.access] [-] [IP]:57678 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    168. 

  168. 2026-10-01 01:33:44,255 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    169. 

  169. 2026-10-01 01:33:44,255 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    170. 

  170. 2026-10-01 01:33:44,255 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    171. 

  171. 2026-10-01 01:33:44,256 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    172. 

  172. 2026-10-01 01:33:44,257 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    173. 

  173. 2026-10-01 01:33:44,257 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 28.0
    174. 

  174. 2026-10-01 01:33:44,257 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    175. 

  175. 2026-10-01 01:33:44,258 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    176. 

  176. 2026-10-01 01:33:44,258 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    177. 

  177. 2026-10-01 01:33:44,259 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Kids_Points_-_Modular_Ten_Position_Base_and_Connectors_-_Light_Gray_PLA_-_Textured_PEI_-_Magi
    178. 

  178. 2026-10-01 01:33:44,350 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    179. 

  179. 2026-10-01 01:33:44,350 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    180. 

  180. 2026-10-01 01:33:44,350 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    181. 

  181. 2026-10-01 01:33:44,351 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    182. 

  182. 2026-10-01 01:33:44,351 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    183. 

  183. 2026-10-01 01:33:44,352 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    184. 

  184. 2026-10-01 01:33:44,352 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    185. 

  185. 2026-10-01 01:33:44,353 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    186. 

  186. 2026-10-01 01:33:44,353 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    187. 

  187. 2026-10-01 01:33:44,354 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Marcus_Pumpkin_Underlay_12_Changes_PEI55
    188. 

  188. 2026-10-01 01:33:44,754 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    189. 

  189. 2026-10-01 01:33:44,754 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    190. 

  190. 2026-10-01 01:33:44,755 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: 1935530438.3mf
    191. 

  191. 2026-10-01 01:33:44,756 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    192. 

  192. 2026-10-01 01:33:44,757 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    193. 

  193. 2026-10-01 01:33:44,757 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 29.0
    194. 

  194. 2026-10-01 01:33:44,758 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    195. 

  195. 2026-10-01 01:33:44,758 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    196. 

  196. 2026-10-01 01:33:44,764 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    197. 

  197. 2026-10-01 01:33:44,764 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: 1935530438.3mf
    198. 

  198. 2026-10-01 01:33:44,828 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 207329 bytes
    199. 

  199. 2026-10-01 01:33:44,944 INFO [uvicorn.access] [-] [IP]:57698 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    200. 

  200. 2026-10-01 01:33:45,023 INFO [uvicorn.access] [-] [IP]:42710 - "POST /api/v1/auth/login HTTP/1.1" 200
    201.