Главная Обзор Помощь
Вход
yunoadmin
/
bambuddy
зеркало из https://github.com/maziggy/bambuddy
1
0
Ответвить 0
Файлы Задачи 0 Вики
Дерево: 5dd24ab385
Ветки Метки
bambuddy
/
logs
/
34b9f42fc4d34ddca70b6e864a4f5c84.log

34b9f42fc4d34ddca70b6e864a4f5c84.log 36 KB
История Исходник

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-05-10 10:18:00,267 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    2. 

  2. 2026-05-10 10:18:00,267 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    3. 

  3. 2026-05-10 10:18:00,268 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    4. 

  4. 2026-05-10 10:18:00,268 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    5. 

  5. 2026-05-10 10:18:00,268 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    6. 

  6. 2026-05-10 10:18:00,269 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    7. 

  7. 2026-05-10 10:18:00,269 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    8. 

  8. 2026-05-10 10:18:00,269 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    9. 

  9. 2026-05-10 10:18:00,270 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    10. 

  10. 2026-05-10 10:18:00,270 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    11. 

  11. 2026-05-10 10:18:00,271 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    12. 

  12. 2026-05-10 10:18:00,271 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    13. 

  13. 2026-05-10 10:18:00,271 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    14. 

  14. 2026-05-10 10:18:00,272 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    15. 

  15. 2026-05-10 10:18:00,272 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    16. 

  16. 2026-05-10 10:18:00,272 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    17. 

  17. 2026-05-10 10:18:00,273 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224663168, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    18. 

  18. 2026-05-10 10:18:00,273 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    19. 

  19. 2026-05-10 10:18:00,274 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    20. 

  20. 2026-05-10 10:18:00,274 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    21. 

  21. 2026-05-10 10:18:00,275 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    22. 

  22. 2026-05-10 10:18:01,400 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8107719, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    23. 

  23. 2026-05-10 10:18:01,401 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    24. 

  24. 2026-05-10 10:18:01,401 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    25. 

  25. 2026-05-10 10:18:01,401 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    26. 

  26. 2026-05-10 10:18:01,401 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    27. 

  27. 2026-05-10 10:18:01,401 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    28. 

  28. 2026-05-10 10:18:01,402 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    29. 

  29. 2026-05-10 10:18:01,402 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    30. 

  30. 2026-05-10 10:18:01,402 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    31. 

  31. 2026-05-10 10:18:01,403 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    32. 

  32. 2026-05-10 10:18:01,403 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    33. 

  33. 2026-05-10 10:18:01,403 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    34. 

  34. 2026-05-10 10:18:01,404 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    35. 

  35. 2026-05-10 10:18:01,404 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    36. 

  36. 2026-05-10 10:18:01,404 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    37. 

  37. 2026-05-10 10:18:01,405 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    38. 

  38. 2026-05-10 10:18:01,405 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    39. 

  39. 2026-05-10 10:18:01,405 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224663168, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    40. 

  40. 2026-05-10 10:18:01,406 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    41. 

  41. 2026-05-10 10:18:01,406 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    42. 

  42. 2026-05-10 10:18:01,406 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    43. 

  43. 2026-05-10 10:18:01,406 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    44. 

  44. 2026-05-10 10:18:02,084 DEBUG [backend.app.main] [[PRINTER]] Runtime tracking: added 30s, total=913530s (253.76h)
    45. 

  45. 2026-05-10 10:18:02,090 DEBUG [backend.app.main] Updated runtime for 1 printer(s)
    46. 

  46. 2026-05-10 10:18:02,567 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8107719, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    47. 

  47. 2026-05-10 10:18:02,567 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    48. 

  48. 2026-05-10 10:18:02,567 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    49. 

  49. 2026-05-10 10:18:02,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    50. 

  50. 2026-05-10 10:18:02,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    51. 

  51. 2026-05-10 10:18:02,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    52. 

  52. 2026-05-10 10:18:02,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    53. 

  53. 2026-05-10 10:18:02,568 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    54. 

  54. 2026-05-10 10:18:02,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    55. 

  55. 2026-05-10 10:18:02,569 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    56. 

  56. 2026-05-10 10:18:02,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    57. 

  57. 2026-05-10 10:18:02,570 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    58. 

  58. 2026-05-10 10:18:02,571 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    59. 

  59. 2026-05-10 10:18:02,571 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    60. 

  60. 2026-05-10 10:18:02,571 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    61. 

  61. 2026-05-10 10:18:02,572 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    62. 

  62. 2026-05-10 10:18:02,572 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    63. 

  63. 2026-05-10 10:18:02,573 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224662144, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    64. 

  64. 2026-05-10 10:18:02,573 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    65. 

  65. 2026-05-10 10:18:02,574 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    66. 

  66. 2026-05-10 10:18:02,574 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    67. 

  67. 2026-05-10 10:18:02,575 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    68. 

  68. 2026-05-10 10:18:03,698 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8107719, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    69. 

  69. 2026-05-10 10:18:03,698 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    70. 

  70. 2026-05-10 10:18:03,698 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    71. 

  71. 2026-05-10 10:18:03,699 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    72. 

  72. 2026-05-10 10:18:03,699 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    73. 

  73. 2026-05-10 10:18:03,699 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    74. 

  74. 2026-05-10 10:18:03,699 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    75. 

  75. 2026-05-10 10:18:03,699 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    76. 

  76. 2026-05-10 10:18:03,700 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    77. 

  77. 2026-05-10 10:18:03,700 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    78. 

  78. 2026-05-10 10:18:03,700 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    79. 

  79. 2026-05-10 10:18:03,700 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    80. 

  80. 2026-05-10 10:18:03,700 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    81. 

  81. 2026-05-10 10:18:03,701 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    82. 

  82. 2026-05-10 10:18:03,702 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    83. 

  83. 2026-05-10 10:18:03,703 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    84. 

  84. 2026-05-10 10:18:03,703 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    85. 

  85. 2026-05-10 10:18:03,703 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224661120, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    86. 

  86. 2026-05-10 10:18:03,704 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    87. 

  87. 2026-05-10 10:18:03,704 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    88. 

  88. 2026-05-10 10:18:03,705 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    89. 

  89. 2026-05-10 10:18:03,705 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    90. 

  90. 2026-05-10 10:18:04,889 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8107719, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    91. 

  91. 2026-05-10 10:18:04,889 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    92. 

  92. 2026-05-10 10:18:04,890 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    93. 

  93. 2026-05-10 10:18:04,890 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    94. 

  94. 2026-05-10 10:18:04,890 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    95. 

  95. 2026-05-10 10:18:04,891 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    96. 

  96. 2026-05-10 10:18:04,891 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    97. 

  97. 2026-05-10 10:18:04,892 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    98. 

  98. 2026-05-10 10:18:04,892 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    99. 

  99. 2026-05-10 10:18:04,893 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    100. 

  100. 2026-05-10 10:18:04,893 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    101. 

  101. 2026-05-10 10:18:04,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    102. 

  102. 2026-05-10 10:18:04,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    103. 

  103. 2026-05-10 10:18:04,894 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    104. 

  104. 2026-05-10 10:18:04,895 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    105. 

  105. 2026-05-10 10:18:04,895 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    106. 

  106. 2026-05-10 10:18:04,896 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    107. 

  107. 2026-05-10 10:18:04,896 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224661120, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    108. 

  108. 2026-05-10 10:18:04,897 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    109. 

  109. 2026-05-10 10:18:04,897 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    110. 

  110. 2026-05-10 10:18:04,898 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    111. 

  111. 2026-05-10 10:18:04,899 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    112. 

  112. 2026-05-10 10:18:06,016 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8107719, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    113. 

  113. 2026-05-10 10:18:06,016 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    114. 

  114. 2026-05-10 10:18:06,016 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    115. 

  115. 2026-05-10 10:18:06,016 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    116. 

  116. 2026-05-10 10:18:06,017 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    117. 

  117. 2026-05-10 10:18:06,017 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    118. 

  118. 2026-05-10 10:18:06,017 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    119. 

  119. 2026-05-10 10:18:06,017 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    120. 

  120. 2026-05-10 10:18:06,018 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    121. 

  121. 2026-05-10 10:18:06,018 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    122. 

  122. 2026-05-10 10:18:06,018 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    123. 

  123. 2026-05-10 10:18:06,018 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    124. 

  124. 2026-05-10 10:18:06,018 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    125. 

  125. 2026-05-10 10:18:06,019 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    126. 

  126. 2026-05-10 10:18:06,019 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    127. 

  127. 2026-05-10 10:18:06,019 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    128. 

  128. 2026-05-10 10:18:06,019 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    129. 

  129. 2026-05-10 10:18:06,020 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224660096, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    130. 

  130. 2026-05-10 10:18:06,020 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    131. 

  131. 2026-05-10 10:18:06,020 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    132. 

  132. 2026-05-10 10:18:06,020 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    133. 

  133. 2026-05-10 10:18:06,021 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    134. 

  134. 2026-05-10 10:18:07,212 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8107719, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    135. 

  135. 2026-05-10 10:18:07,212 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    136. 

  136. 2026-05-10 10:18:07,212 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    137. 

  137. 2026-05-10 10:18:07,213 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    138. 

  138. 2026-05-10 10:18:07,213 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    139. 

  139. 2026-05-10 10:18:07,213 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    140. 

  140. 2026-05-10 10:18:07,213 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    141. 

  141. 2026-05-10 10:18:07,214 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    142. 

  142. 2026-05-10 10:18:07,214 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    143. 

  143. 2026-05-10 10:18:07,214 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    144. 

  144. 2026-05-10 10:18:07,214 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    145. 

  145. 2026-05-10 10:18:07,215 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    146. 

  146. 2026-05-10 10:18:07,215 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    147. 

  147. 2026-05-10 10:18:07,215 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    148. 

  148. 2026-05-10 10:18:07,215 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    149. 

  149. 2026-05-10 10:18:07,216 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    150. 

  150. 2026-05-10 10:18:07,216 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    151. 

  151. 2026-05-10 10:18:07,216 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224660096, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    152. 

  152. 2026-05-10 10:18:07,216 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    153. 

  153. 2026-05-10 10:18:07,217 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    154. 

  154. 2026-05-10 10:18:07,217 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    155. 

  155. 2026-05-10 10:18:07,217 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    156. 

  156. 2026-05-10 10:18:08,335 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8107719, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    157. 

  157. 2026-05-10 10:18:08,336 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    158. 

  158. 2026-05-10 10:18:08,336 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    159. 

  159. 2026-05-10 10:18:08,336 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    160. 

  160. 2026-05-10 10:18:08,336 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    161. 

  161. 2026-05-10 10:18:08,337 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    162. 

  162. 2026-05-10 10:18:08,337 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    163. 

  163. 2026-05-10 10:18:08,337 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    164. 

  164. 2026-05-10 10:18:08,337 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    165. 

  165. 2026-05-10 10:18:08,338 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    166. 

  166. 2026-05-10 10:18:08,338 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    167. 

  167. 2026-05-10 10:18:08,338 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    168. 

  168. 2026-05-10 10:18:08,338 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    169. 

  169. 2026-05-10 10:18:08,338 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    170. 

  170. 2026-05-10 10:18:08,339 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    171. 

  171. 2026-05-10 10:18:08,339 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    172. 

  172. 2026-05-10 10:18:08,339 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    173. 

  173. 2026-05-10 10:18:08,340 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224659072, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    174. 

  174. 2026-05-10 10:18:08,340 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    175. 

  175. 2026-05-10 10:18:08,340 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    176. 

  176. 2026-05-10 10:18:08,340 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    177. 

  177. 2026-05-10 10:18:08,341 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    178. 

  178. 2026-05-10 10:18:09,510 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8107719, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    179. 

  179. 2026-05-10 10:18:09,510 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    180. 

  180. 2026-05-10 10:18:09,511 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8107719 (binary: 0b11110111011011011000111)
    181. 

  181. 2026-05-10 10:18:09,511 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_13.gcode, subtask_name: 适用于 P2S 底座 V1.5.7
    182. 

  182. 2026-05-10 10:18:09,512 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_hall_out_bits': '8', 'tray_is_bbl_bits': 'f', 'tray_now': '3', 'tray_pre': '3', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '3', 'unbind_ams_stat': 0, 'version': 1093}
    183. 

  183. 2026-05-10 10:18:09,512 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 3
    184. 

  184. 2026-05-10 10:18:09,513 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    185. 

  185. 2026-05-10 10:18:09,513 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002003 -> extruder 0
    186. 

  186. 2026-05-10 10:18:09,514 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0}
    187. 

  187. 2026-05-10 10:18:09,514 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    188. 

  188. 2026-05-10 10:18:09,515 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    189. 

  189. 2026-05-10 10:18:09,515 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    190. 

  190. 2026-05-10 10:18:09,516 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 44°C (heater OFF)
    191. 

  191. 2026-05-10 10:18:09,516 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    192. 

  192. 2026-05-10 10:18:09,517 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=44.0, heating=False, respect_local=False
    193. 

  193. 2026-05-10 10:18:09,517 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 44.0, target: 0.0, heating: False
    194. 

  194. 2026-05-10 10:18:09,517 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33555, 'ts_unix': '20260509140224'}, {'attr': 83887360, 'code': 65543, 'ts_boot': 72214695, 'ts_unix': '20260510101009'}]
    195. 

  195. 2026-05-10 10:18:09,518 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tl_external_free_kb': 224659072, 'tl_external_total_kb': 262111936, 'tl_internal_free_kb': 931128, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    196. 

  196. 2026-05-10 10:18:09,518 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    197. 

  197. 2026-05-10 10:18:09,518 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    198. 

  198. 2026-05-10 10:18:09,519 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 65535, 3]
    199. 

  199. 2026-05-10 10:18:09,519 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_13.gcode, subtask: 适用于 P2S 底座 V1.5.7
    200. 

  200. 2026-05-10 10:18:09,574 INFO [backend.app.api.routes.support] Log level changed to INFO
    201.