Главная Обзор Помощь
Вход
yunoadmin
/
bambuddy
зеркало из https://github.com/maziggy/bambuddy
1
0
Ответвить 0
Файлы Задачи 0 Вики
Дерево: 5b61aa2137
Ветки Метки
bambuddy
/
logs
/
f9782b2437034d9db8d1acac46c801cd.log

f9782b2437034d9db8d1acac46c801cd.log 32 KB
История Исходник

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-04-13 16:06:23,961 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    2. 

  2. 2026-04-13 16:06:23,961 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tutk_server': 'disable'}
    3. 

  3. 2026-04-13 16:06:23,962 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -40dBm
    4. 

  4. 2026-04-13 16:06:23,962 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    5. 

  5. 2026-04-13 16:06:23,962 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_3.gcode, subtask: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    6. 

  6. 2026-04-13 16:06:23,966 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    7. 

  7. 2026-04-13 16:06:23,966 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -36dBm
    8. 

  8. 2026-04-13 16:06:24,025 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    9. 

  9. 2026-04-13 16:06:24,025 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -62dBm
    10. 

  10. 2026-04-13 16:06:24,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    11. 

  11. 2026-04-13 16:06:24,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    12. 

  12. 2026-04-13 16:06:24,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_3.gcode, subtask_name: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    13. 

  13. 2026-04-13 16:06:24,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '0', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '0', 'tray_is_bbl_bits': '0', 'tray_now': '254', 'tray_pre': '254', 'tray_read_done_bits': '0', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 2}
    14. 

  14. 2026-04-13 16:06:24,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 254
    15. 

  15. 2026-04-13 16:06:24,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 0 new units, 0 total
    16. 

  16. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    17. 

  17. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    18. 

  18. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 29.0
    19. 

  19. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    20. 

  20. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    21. 

  21. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    22. 

  22. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    23. 

  23. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    24. 

  24. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -42dBm
    25. 

  25. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    26. 

  26. 2026-04-13 16:06:24,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_3.gcode, subtask: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    27. 

  27. 2026-04-13 16:06:24,040 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    28. 

  28. 2026-04-13 16:06:24,041 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -39dBm
    29. 

  29. 2026-04-13 16:06:24,049 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    30. 

  30. 2026-04-13 16:06:24,049 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    31. 

  31. 2026-04-13 16:06:24,049 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_3.gcode, subtask_name: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    32. 

  32. 2026-04-13 16:06:24,049 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '0', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '0', 'tray_is_bbl_bits': '0', 'tray_now': '254', 'tray_pre': '254', 'tray_read_done_bits': '0', 'tray_reading_bits': '0', 'tray_tar': '254', 'version': 3}
    33. 

  33. 2026-04-13 16:06:24,049 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 254
    34. 

  34. 2026-04-13 16:06:24,049 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 0 new units, 0 total
    35. 

  35. 2026-04-13 16:06:24,049 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    36. 

  36. 2026-04-13 16:06:24,049 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    37. 

  37. 2026-04-13 16:06:24,050 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 28.0
    38. 

  38. 2026-04-13 16:06:24,050 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    39. 

  39. 2026-04-13 16:06:24,050 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    40. 

  40. 2026-04-13 16:06:24,050 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    41. 

  41. 2026-04-13 16:06:24,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    42. 

  42. 2026-04-13 16:06:24,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'ipcam_dev': '1', 'ipcam_record': 'enable', 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tutk_server': 'disable'}
    43. 

  43. 2026-04-13 16:06:24,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -43dBm
    44. 

  44. 2026-04-13 16:06:24,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    45. 

  45. 2026-04-13 16:06:24,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_3.gcode, subtask: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    46. 

  46. 2026-04-13 16:06:24,080 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    47. 

  47. 2026-04-13 16:06:24,080 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -32dBm
    48. 

  48. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    49. 

  49. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    50. 

  50. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_3.gcode, subtask_name: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    51. 

  51. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '0', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '0', 'tray_is_bbl_bits': '0', 'tray_now': '254', 'tray_pre': '254', 'tray_read_done_bits': '0', 'tray_reading_bits': '0', 'tray_tar': '254', 'version': 2}
    52. 

  52. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 254
    53. 

  53. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 0 new units, 0 total
    54. 

  54. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    55. 

  55. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    56. 

  56. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 30.0
    57. 

  57. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 30.0°C (heater OFF)
    58. 

  58. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    59. 

  59. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    60. 

  60. 2026-04-13 16:06:24,092 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83886336, 'code': 196612}]
    61. 

  61. 2026-04-13 16:06:24,093 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    62. 

  62. 2026-04-13 16:06:24,093 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -44dBm
    63. 

  63. 2026-04-13 16:06:24,093 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    64. 

  64. 2026-04-13 16:06:24,093 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    65. 

  65. 2026-04-13 16:06:24,093 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -37dBm
    66. 

  66. 2026-04-13 16:06:24,093 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_3.gcode, subtask: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    67. 

  67. 2026-04-13 16:06:24,096 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    68. 

  68. 2026-04-13 16:06:24,097 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -62dBm
    69. 

  69. 2026-04-13 16:06:24,115 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    70. 

  70. 2026-04-13 16:06:24,115 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -41dBm
    71. 

  71. 2026-04-13 16:06:24,128 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    72. 

  72. 2026-04-13 16:06:24,128 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -28dBm
    73. 

  73. 2026-04-13 16:06:24,132 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    74. 

  74. 2026-04-13 16:06:24,132 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -61dBm
    75. 

  75. 2026-04-13 16:06:24,136 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    76. 

  76. 2026-04-13 16:06:24,136 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -32dBm
    77. 

  77. 2026-04-13 16:06:24,147 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    78. 

  78. 2026-04-13 16:06:24,147 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    79. 

  79. 2026-04-13 16:06:24,147 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_3.gcode, subtask_name: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    80. 

  80. 2026-04-13 16:06:24,147 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '0', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '0', 'tray_is_bbl_bits': '0', 'tray_now': '254', 'tray_pre': '254', 'tray_read_done_bits': '0', 'tray_reading_bits': '0', 'tray_tar': '254', 'version': 2}
    81. 

  81. 2026-04-13 16:06:24,147 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 254
    82. 

  82. 2026-04-13 16:06:24,147 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 0 new units, 0 total
    83. 

  83. 2026-04-13 16:06:24,147 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    84. 

  84. 2026-04-13 16:06:24,147 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    85. 

  85. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 28.0
    86. 

  86. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    87. 

  87. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    88. 

  88. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    89. 

  89. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83886336, 'code': 196612}, {'attr': 50334976, 'code': 131073}]
    90. 

  90. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'ipcam_dev': '1', 'ipcam_record': 'enable', 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tutk_server': 'disable'}
    91. 

  91. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -41dBm
    92. 

  92. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    93. 

  93. 2026-04-13 16:06:24,148 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_3.gcode, subtask: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    94. 

  94. 2026-04-13 16:06:24,149 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    95. 

  95. 2026-04-13 16:06:24,149 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    96. 

  96. 2026-04-13 16:06:24,149 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_3.gcode, subtask_name: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    97. 

  97. 2026-04-13 16:06:24,149 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '0', 'ams_exist_bits_raw': '0', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '0', 'tray_is_bbl_bits': '0', 'tray_now': '254', 'tray_pre': '254', 'tray_read_done_bits': '0', 'tray_reading_bits': '0', 'tray_tar': '254', 'version': 2}
    98. 

  98. 2026-04-13 16:06:24,149 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 254
    99. 

  99. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 0 new units, 0 total
    100. 

  100. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    101. 

  101. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    102. 

  102. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 28.0
    103. 

  103. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 28.0°C (heater OFF)
    104. 

  104. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    105. 

  105. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    106. 

  106. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    107. 

  107. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'disable', 'timelapse': 'disable', 'tutk_server': 'disable'}
    108. 

  108. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -33dBm
    109. 

  109. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    110. 

  110. 2026-04-13 16:06:24,150 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_3.gcode, subtask: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    111. 

  111. 2026-04-13 16:06:24,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    112. 

  112. 2026-04-13 16:06:24,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -61dBm
    113. 

  113. 2026-04-13 16:06:24,160 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    114. 

  114. 2026-04-13 16:06:24,160 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -34dBm
    115. 

  115. 2026-04-13 16:06:24,174 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    116. 

  116. 2026-04-13 16:06:24,174 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -32dBm
    117. 

  117. 2026-04-13 16:06:24,175 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    118. 

  118. 2026-04-13 16:06:24,176 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -43dBm
    119. 

  119. 2026-04-13 16:06:24,187 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    120. 

  120. 2026-04-13 16:06:24,187 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -31dBm
    121. 

  121. 2026-04-13 16:06:24,187 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    122. 

  122. 2026-04-13 16:06:24,187 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    123. 

  123. 2026-04-13 16:06:24,187 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -32dBm
    124. 

  124. 2026-04-13 16:06:24,188 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -34dBm
    125. 

  125. 2026-04-13 16:06:24,189 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    126. 

  126. 2026-04-13 16:06:24,202 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    127. 

  127. 2026-04-13 16:06:24,202 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -34dBm
    128. 

  128. 2026-04-13 16:06:24,202 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    129. 

  129. 2026-04-13 16:06:24,205 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    130. 

  130. 2026-04-13 16:06:24,205 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -62dBm
    131. 

  131. 2026-04-13 16:06:24,205 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    132. 

  132. 2026-04-13 16:06:24,205 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -44dBm
    133. 

  133. 2026-04-13 16:06:24,207 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    134. 

  134. 2026-04-13 16:06:24,207 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -28dBm
    135. 

  135. 2026-04-13 16:06:24,211 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    136. 

  136. 2026-04-13 16:06:24,211 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -62dBm
    137. 

  137. 2026-04-13 16:06:24,219 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    138. 

  138. 2026-04-13 16:06:24,219 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -36dBm
    139. 

  139. 2026-04-13 16:06:24,225 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    140. 

  140. 2026-04-13 16:06:24,230 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    141. 

  141. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    142. 

  142. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: BBL-XP1_k78-C_PP_3x_186g_15h46_rev00.gcode.3mf
    143. 

  143. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '0', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '0', 'tray_is_bbl_bits': '0', 'tray_now': '254', 'tray_pre': '254', 'tray_read_done_bits': '0', 'tray_reading_bits': '0', 'tray_tar': '254', 'version': 2}
    144. 

  144. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 254
    145. 

  145. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 0 new units, 0 total
    146. 

  146. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    147. 

  147. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    148. 

  148. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 29.0
    149. 

  149. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 29.0°C (heater OFF)
    150. 

  150. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=29.0, heating=False, respect_local=False
    151. 

  151. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 29.0, target: 0.0, heating: False
    152. 

  152. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    153. 

  153. 2026-04-13 16:06:24,231 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    154. 

  154. 2026-04-13 16:06:24,232 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -45dBm
    155. 

  155. 2026-04-13 16:06:24,232 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    156. 

  156. 2026-04-13 16:06:24,232 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: BBL-XP1_k78-C_PP_3x_186g_15h46_rev00.gcode.3mf
    157. 

  157. 2026-04-13 16:06:24,233 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    158. 

  158. 2026-04-13 16:06:24,241 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    159. 

  159. 2026-04-13 16:06:24,241 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -60dBm
    160. 

  160. 2026-04-13 16:06:24,250 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    161. 

  161. 2026-04-13 16:06:24,251 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -39dBm
    162. 

  162. 2026-04-13 16:06:24,527 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    163. 

  163. 2026-04-13 16:06:24,532 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    164. 

  164. 2026-04-13 16:06:24,532 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    165. 

  165. 2026-04-13 16:06:24,532 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    166. 

  166. 2026-04-13 16:06:24,533 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    167. 

  167. 2026-04-13 16:06:24,533 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    168. 

  168. 2026-04-13 16:06:24,533 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    169. 

  169. 2026-04-13 16:06:24,533 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    170. 

  170. 2026-04-13 16:06:24,533 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    171. 

  171. 2026-04-13 16:06:24,533 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    172. 

  172. 2026-04-13 16:06:24,534 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    173. 

  173. 2026-04-13 16:06:24,534 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    174. 

  174. 2026-04-13 16:06:24,534 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    175. 

  175. 2026-04-13 16:06:24,534 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    176. 

  176. 2026-04-13 16:06:24,534 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    177. 

  177. 2026-04-13 16:06:24,534 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': False, 'halt_print_sensitivity': 'high', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    178. 

  178. 2026-04-13 16:06:24,534 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    179. 

  179. 2026-04-13 16:06:24,534 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    180. 

  180. 2026-04-13 16:06:24,535 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': False, 'spaghetti_detector': False}
    181. 

  181. 2026-04-13 16:06:24,535 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    182. 

  182. 2026-04-13 16:06:24,536 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_3.gcode, subtask_name: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    183. 

  183. 2026-04-13 16:06:24,536 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    184. 

  184. 2026-04-13 16:06:24,536 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -35dBm
    185. 

  185. 2026-04-13 16:06:24,536 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    186. 

  186. 2026-04-13 16:06:24,536 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    187. 

  187. 2026-04-13 16:06:24,536 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    188. 

  188. 2026-04-13 16:06:24,536 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -33dBm
    189. 

  189. 2026-04-13 16:06:24,537 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    190. 

  190. 2026-04-13 16:06:24,537 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -31dBm
    191. 

  191. 2026-04-13 16:06:24,542 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_3.gcode, subtask_name: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.gcode.3mf
    192. 

  192. 2026-04-13 16:06:24,537 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -39dBm
    193. 

  193. 2026-04-13 16:06:24,537 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    194. 

  194. 2026-04-13 16:06:24,538 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -35dBm
    195. 

  195. 2026-04-13 16:06:24,539 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -31dBm
    196. 

  196. 2026-04-13 16:06:24,539 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    197. 

  197. 2026-04-13 16:06:24,540 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    198. 

  198. 2026-04-13 16:06:24,544 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_3.gcode, subtask_name: BBL-XP1_k79-B_PP_3x_178g_14h46_rev01.3mf
    199. 

  199. 2026-04-13 16:06:24,540 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    200. 

  200. 2026-04-13 16:06:24,540 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -43dBm
    201.