Accueil Explorer Aide
Connexion
yunoadmin
/
bambuddy
miroir de https://github.com/maziggy/bambuddy
1
0
Fork 0
Fichiers Tickets 0 Wiki
Aborescence: 327555bd40
Branches Tags
bambuddy
/
logs
/
b92f2f254abb4d148222b2d5c64d4e0d.log

b92f2f254abb4d148222b2d5c64d4e0d.log 36 KB
Historique Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-09-17 14:18:16,135 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 50364419 (0x03008003) -> short_code=0300_8003
    2. 

  2. 2026-09-17 14:18:16,135 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 03008003] HMS available actions: ['RESUME_PRINTING_DEFECTS', 'STOP_PRINTING'] (job_id=)
    3. 

  3. 2026-09-17 14:18:16,135 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    4. 

  4. 2026-09-17 14:18:16,135 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    5. 

  5. 2026-09-17 14:18:16,136 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    6. 

  6. 2026-09-17 14:18:16,136 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: Robot-OST-Mechatronik-V1-Doppel
    7. 

  7. 2026-09-17 14:18:16,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 748983, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    8. 

  8. 2026-09-17 14:18:16,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    9. 

  9. 2026-09-17 14:18:16,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 748983 (binary: 0b10110110110110110111)
    10. 

  10. 2026-09-17 14:18:16,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Robot-OST-Mechatronik-V1
    11. 

  11. 2026-09-17 14:18:16,185 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    12. 

  12. 2026-09-17 14:18:16,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    13. 

  13. 2026-09-17 14:18:16,186 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    14. 

  14. 2026-09-17 14:18:16,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    15. 

  15. 2026-09-17 14:18:16,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    16. 

  16. 2026-09-17 14:18:16,187 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Robot-OST-Mechatronik-V1
    17. 

  17. 2026-09-17 14:18:16,190 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 4
    18. 

  18. 2026-09-17 14:18:16,191 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:53338
    19. 

  19. 2026-09-17 14:18:16,191 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: P2S)
    20. 

  20. 2026-09-17 14:18:16,238 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 748983, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    21. 

  21. 2026-09-17 14:18:16,238 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    22. 

  22. 2026-09-17 14:18:16,238 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 748983 (binary: 0b10110110110110110111)
    23. 

  23. 2026-09-17 14:18:16,238 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Bierhalter_und_Gürtel_Slice_datei
    24. 

  24. 2026-09-17 14:18:16,239 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    25. 

  25. 2026-09-17 14:18:16,239 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    26. 

  26. 2026-09-17 14:18:16,239 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    27. 

  27. 2026-09-17 14:18:16,239 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    28. 

  28. 2026-09-17 14:18:16,240 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Bierhalter_und_Gürtel_Slice_datei
    29. 

  29. 2026-09-17 14:18:16,298 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    30. 

  30. 2026-09-17 14:18:16,298 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    31. 

  31. 2026-09-17 14:18:16,298 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    32. 

  32. 2026-09-17 14:18:16,298 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: HaltAussenFeder
    33. 

  33. 2026-09-17 14:18:16,298 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    34. 

  34. 2026-09-17 14:18:16,299 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    35. 

  35. 2026-09-17 14:18:16,299 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    36. 

  36. 2026-09-17 14:18:16,299 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    37. 

  37. 2026-09-17 14:18:16,299 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: HaltAussenFeder
    38. 

  38. 2026-09-17 14:18:16,428 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    39. 

  39. 2026-09-17 14:18:16,428 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    40. 

  40. 2026-09-17 14:18:16,428 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    41. 

  41. 2026-09-17 14:18:16,428 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Zwischenstueck
    42. 

  42. 2026-09-17 14:18:16,428 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    43. 

  43. 2026-09-17 14:18:16,429 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    44. 

  44. 2026-09-17 14:18:16,429 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    45. 

  45. 2026-09-17 14:18:16,430 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    46. 

  46. 2026-09-17 14:18:16,430 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Zwischenstueck
    47. 

  47. 2026-09-17 14:18:17,356 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    48. 

  48. 2026-09-17 14:18:17,356 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    49. 

  49. 2026-09-17 14:18:17,356 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    50. 

  50. 2026-09-17 14:18:17,356 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Robot-OST-Mechatronik-V1-Doppel
    51. 

  51. 2026-09-17 14:18:17,357 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    52. 

  52. 2026-09-17 14:18:17,357 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 201327360, 'code': 196616, 'ts_boot': 87892981, 'ts_unix': '20260915224711'}]
    53. 

  53. 2026-09-17 14:18:17,357 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 50364419 (0x03008003) -> short_code=0300_8003
    54. 

  54. 2026-09-17 14:18:17,357 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 03008003] HMS available actions: ['RESUME_PRINTING_DEFECTS', 'STOP_PRINTING'] (job_id=)
    55. 

  55. 2026-09-17 14:18:17,358 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'enable', 'tl_external_free_kb': 24014464, 'tl_external_total_kb': 61436800, 'tl_internal_free_kb': 364025, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    56. 

  56. 2026-09-17 14:18:17,358 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    57. 

  57. 2026-09-17 14:18:17,358 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    58. 

  58. 2026-09-17 14:18:17,358 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    59. 

  59. 2026-09-17 14:18:17,358 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: Robot-OST-Mechatronik-V1-Doppel
    60. 

  60. 2026-09-17 14:18:17,362 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    61. 

  61. 2026-09-17 14:18:17,362 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    62. 

  62. 2026-09-17 14:18:17,362 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    63. 

  63. 2026-09-17 14:18:17,362 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: HaltAussenFeder
    64. 

  64. 2026-09-17 14:18:17,362 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    65. 

  65. 2026-09-17 14:18:17,363 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    66. 

  66. 2026-09-17 14:18:17,363 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    67. 

  67. 2026-09-17 14:18:17,363 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    68. 

  68. 2026-09-17 14:18:17,363 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: HaltAussenFeder
    69. 

  69. 2026-09-17 14:18:17,404 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 182851 bytes
    70. 

  70. 2026-09-17 14:18:17,405 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 182851 bytes
    71. 

  71. 2026-09-17 14:18:17,405 DEBUG [backend.app.main] [-] [FINISH-PHOTO-BANK] banked in-print frame for printer 4 at layer 289/500 (182851 bytes)
    72. 

  72. 2026-09-17 14:18:17,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 748983, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    73. 

  73. 2026-09-17 14:18:17,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    74. 

  74. 2026-09-17 14:18:17,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 748983 (binary: 0b10110110110110110111)
    75. 

  75. 2026-09-17 14:18:17,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Robot-OST-Mechatronik-V1
    76. 

  76. 2026-09-17 14:18:17,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    77. 

  77. 2026-09-17 14:18:17,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    78. 

  78. 2026-09-17 14:18:17,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    79. 

  79. 2026-09-17 14:18:17,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    80. 

  80. 2026-09-17 14:18:17,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    81. 

  81. 2026-09-17 14:18:17,444 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Robot-OST-Mechatronik-V1
    82. 

  82. 2026-09-17 14:18:17,503 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 748983, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    83. 

  83. 2026-09-17 14:18:17,503 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    84. 

  84. 2026-09-17 14:18:17,503 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 748983 (binary: 0b10110110110110110111)
    85. 

  85. 2026-09-17 14:18:17,503 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Bierhalter_und_Gürtel_Slice_datei
    86. 

  86. 2026-09-17 14:18:17,503 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    87. 

  87. 2026-09-17 14:18:17,503 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    88. 

  88. 2026-09-17 14:18:17,504 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    89. 

  89. 2026-09-17 14:18:17,504 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    90. 

  90. 2026-09-17 14:18:17,504 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Bierhalter_und_Gürtel_Slice_datei
    91. 

  91. 2026-09-17 14:18:17,632 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    92. 

  92. 2026-09-17 14:18:17,633 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    93. 

  93. 2026-09-17 14:18:17,633 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    94. 

  94. 2026-09-17 14:18:17,633 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Zwischenstueck
    95. 

  95. 2026-09-17 14:18:17,633 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    96. 

  96. 2026-09-17 14:18:17,633 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    97. 

  97. 2026-09-17 14:18:17,633 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 15003520, 'tl_external_total_kb': 61432832, 'tl_internal_free_kb': 517327, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    98. 

  98. 2026-09-17 14:18:17,634 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    99. 

  99. 2026-09-17 14:18:17,634 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    100. 

  100. 2026-09-17 14:18:17,634 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Zwischenstueck
    101. 

  101. 2026-09-17 14:18:18,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    102. 

  102. 2026-09-17 14:18:18,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    103. 

  103. 2026-09-17 14:18:18,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    104. 

  104. 2026-09-17 14:18:18,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Robot-OST-Mechatronik-V1-Doppel
    105. 

  105. 2026-09-17 14:18:18,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    106. 

  106. 2026-09-17 14:18:18,442 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 201327360, 'code': 196616, 'ts_boot': 87892981, 'ts_unix': '20260915224711'}]
    107. 

  107. 2026-09-17 14:18:18,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 50364419 (0x03008003) -> short_code=0300_8003
    108. 

  108. 2026-09-17 14:18:18,443 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 03008003] HMS available actions: ['RESUME_PRINTING_DEFECTS', 'STOP_PRINTING'] (job_id=)
    109. 

  109. 2026-09-17 14:18:18,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    110. 

  110. 2026-09-17 14:18:18,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    111. 

  111. 2026-09-17 14:18:18,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    112. 

  112. 2026-09-17 14:18:18,443 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: Robot-OST-Mechatronik-V1-Doppel
    113. 

  113. 2026-09-17 14:18:18,467 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 748983, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    114. 

  114. 2026-09-17 14:18:18,468 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    115. 

  115. 2026-09-17 14:18:18,468 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 748983 (binary: 0b10110110110110110111)
    116. 

  116. 2026-09-17 14:18:18,468 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Robot-OST-Mechatronik-V1
    117. 

  117. 2026-09-17 14:18:18,468 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    118. 

  118. 2026-09-17 14:18:18,468 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    119. 

  119. 2026-09-17 14:18:18,469 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    120. 

  120. 2026-09-17 14:18:18,469 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    121. 

  121. 2026-09-17 14:18:18,469 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    122. 

  122. 2026-09-17 14:18:18,469 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Robot-OST-Mechatronik-V1
    123. 

  123. 2026-09-17 14:18:18,534 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 748983, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    124. 

  124. 2026-09-17 14:18:18,534 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    125. 

  125. 2026-09-17 14:18:18,534 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 748983 (binary: 0b10110110110110110111)
    126. 

  126. 2026-09-17 14:18:18,535 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Bierhalter_und_Gürtel_Slice_datei
    127. 

  127. 2026-09-17 14:18:18,535 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    128. 

  128. 2026-09-17 14:18:18,535 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    129. 

  129. 2026-09-17 14:18:18,535 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    130. 

  130. 2026-09-17 14:18:18,536 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    131. 

  131. 2026-09-17 14:18:18,536 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Bierhalter_und_Gürtel_Slice_datei
    132. 

  132. 2026-09-17 14:18:18,588 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    133. 

  133. 2026-09-17 14:18:18,588 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    134. 

  134. 2026-09-17 14:18:18,588 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    135. 

  135. 2026-09-17 14:18:18,589 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: HaltAussenFeder
    136. 

  136. 2026-09-17 14:18:18,589 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    137. 

  137. 2026-09-17 14:18:18,589 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    138. 

  138. 2026-09-17 14:18:18,589 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    139. 

  139. 2026-09-17 14:18:18,590 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    140. 

  140. 2026-09-17 14:18:18,590 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: HaltAussenFeder
    141. 

  141. 2026-09-17 14:18:18,715 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    142. 

  142. 2026-09-17 14:18:18,715 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    143. 

  143. 2026-09-17 14:18:18,715 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    144. 

  144. 2026-09-17 14:18:18,715 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Zwischenstueck
    145. 

  145. 2026-09-17 14:18:18,716 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    146. 

  146. 2026-09-17 14:18:18,716 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    147. 

  147. 2026-09-17 14:18:18,716 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    148. 

  148. 2026-09-17 14:18:18,717 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    149. 

  149. 2026-09-17 14:18:18,717 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Zwischenstueck
    150. 

  150. 2026-09-17 14:18:19,657 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    151. 

  151. 2026-09-17 14:18:19,658 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    152. 

  152. 2026-09-17 14:18:19,658 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    153. 

  153. 2026-09-17 14:18:19,658 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: HaltAussenFeder
    154. 

  154. 2026-09-17 14:18:19,658 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    155. 

  155. 2026-09-17 14:18:19,658 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    156. 

  156. 2026-09-17 14:18:19,659 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    157. 

  157. 2026-09-17 14:18:19,659 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    158. 

  158. 2026-09-17 14:18:19,659 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: HaltAussenFeder
    159. 

  159. 2026-09-17 14:18:19,689 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    160. 

  160. 2026-09-17 14:18:19,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    161. 

  161. 2026-09-17 14:18:19,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    162. 

  162. 2026-09-17 14:18:19,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: PAUSE, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Robot-OST-Mechatronik-V1-Doppel
    163. 

  163. 2026-09-17 14:18:19,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    164. 

  164. 2026-09-17 14:18:19,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 201327360, 'code': 196616, 'ts_boot': 87892981, 'ts_unix': '20260915224711'}]
    165. 

  165. 2026-09-17 14:18:19,690 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] print_error: 50364419 (0x03008003) -> short_code=0300_8003
    166. 

  166. 2026-09-17 14:18:19,691 DEBUG [backend.app.services.bambu_mqtt] [-] [22E, 03008003] HMS available actions: ['RESUME_PRINTING_DEFECTS', 'STOP_PRINTING'] (job_id=)
    167. 

  167. 2026-09-17 14:18:19,691 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'enable', 'tl_external_free_kb': 24014208, 'tl_external_total_kb': 61436800, 'tl_internal_free_kb': 364025, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    168. 

  168. 2026-09-17 14:18:19,691 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    169. 

  169. 2026-09-17 14:18:19,691 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    170. 

  170. 2026-09-17 14:18:19,692 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    171. 

  171. 2026-09-17 14:18:19,692 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: PAUSE -> PAUSE, file: /data/Metadata/plate_1.gcode, subtask: Robot-OST-Mechatronik-V1-Doppel
    172. 

  172. 2026-09-17 14:18:19,757 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 748983, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    173. 

  173. 2026-09-17 14:18:19,757 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    174. 

  174. 2026-09-17 14:18:19,757 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 748983 (binary: 0b10110110110110110111)
    175. 

  175. 2026-09-17 14:18:19,757 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Robot-OST-Mechatronik-V1
    176. 

  176. 2026-09-17 14:18:19,758 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    177. 

  177. 2026-09-17 14:18:19,758 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    178. 

  178. 2026-09-17 14:18:19,758 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    179. 

  179. 2026-09-17 14:18:19,759 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    180. 

  180. 2026-09-17 14:18:19,759 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    181. 

  181. 2026-09-17 14:18:19,759 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Robot-OST-Mechatronik-V1
    182. 

  182. 2026-09-17 14:18:19,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 748983, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    183. 

  183. 2026-09-17 14:18:19,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    184. 

  184. 2026-09-17 14:18:19,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 748983 (binary: 0b10110110110110110111)
    185. 

  185. 2026-09-17 14:18:19,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Bierhalter_und_Gürtel_Slice_datei
    186. 

  186. 2026-09-17 14:18:19,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    187. 

  187. 2026-09-17 14:18:19,814 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    188. 

  188. 2026-09-17 14:18:19,814 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    189. 

  189. 2026-09-17 14:18:19,814 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    190. 

  190. 2026-09-17 14:18:19,815 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: Bierhalter_und_Gürtel_Slice_datei
    191. 

  191. 2026-09-17 14:18:19,918 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'cfg': 8089015, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    192. 

  192. 2026-09-17 14:18:19,918 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    193. 

  193. 2026-09-17 14:18:19,918 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] xcam cfg bitmask: 8089015 (binary: 0b11110110110110110110111)
    194. 

  194. 2026-09-17 14:18:19,918 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Zwischenstueck
    195. 

  195. 2026-09-17 14:18:19,919 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    196. 

  196. 2026-09-17 14:18:19,919 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    197. 

  197. 2026-09-17 14:18:19,919 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 15003008, 'tl_external_total_kb': 61432832, 'tl_internal_free_kb': 517327, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    198. 

  198. 2026-09-17 14:18:19,919 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    199. 

  199. 2026-09-17 14:18:19,920 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] MQTT mapping field: [65280]
    200. 

  200. 2026-09-17 14:18:19,920 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Zwischenstueck
    201.