Главная Обзор Помощь
Вход
yunoadmin
/
bambuddy
зеркало из https://github.com/maziggy/bambuddy
1
0
Ответвить 0
Файлы Задачи 0 Вики
Дерево: 2fffdfc857
Ветки Метки
bambuddy
/
logs
/
464f9e14ed8f4cef90934b8535ff58f2.log

464f9e14ed8f4cef90934b8535ff58f2.log 34 KB
История Исходник

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-09-28 23:52:04,805 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    2. 

  2. 2026-09-28 23:52:04,807 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    3. 

  3. 2026-09-28 23:52:04,809 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    4. 

  4. 2026-09-28 23:52:04,809 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    5. 

  5. 2026-09-28 23:52:04,810 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    6. 

  6. 2026-09-28 23:52:04,811 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    7. 

  7. 2026-09-28 23:52:04,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    8. 

  8. 2026-09-28 23:52:04,812 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    9. 

  9. 2026-09-28 23:52:04,813 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    10. 

  10. 2026-09-28 23:52:05,268 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    11. 

  11. 2026-09-28 23:52:05,269 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    12. 

  12. 2026-09-28 23:52:05,269 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    13. 

  13. 2026-09-28 23:52:05,270 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    14. 

  14. 2026-09-28 23:52:05,270 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    15. 

  15. 2026-09-28 23:52:05,271 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    16. 

  16. 2026-09-28 23:52:05,271 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    17. 

  17. 2026-09-28 23:52:05,271 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    18. 

  18. 2026-09-28 23:52:05,272 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    19. 

  19. 2026-09-28 23:52:05,272 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    20. 

  20. 2026-09-28 23:52:05,351 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS 0 firmware: 00.01.06.62
    21. 

  21. 2026-09-28 23:52:05,351 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS 1 firmware: 00.01.06.62
    22. 

  22. 2026-09-28 23:52:05,352 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS 2 firmware: 02.00.19.47
    23. 

  23. 2026-09-28 23:52:05,549 INFO [uvicorn.access] [-] [IP]:42352 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    24. 

  24. 2026-09-28 23:52:05,691 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    25. 

  25. 2026-09-28 23:52:05,692 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    26. 

  26. 2026-09-28 23:52:05,692 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    27. 

  27. 2026-09-28 23:52:05,693 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    28. 

  28. 2026-09-28 23:52:05,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    29. 

  29. 2026-09-28 23:52:05,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    30. 

  30. 2026-09-28 23:52:05,695 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    31. 

  31. 2026-09-28 23:52:05,696 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 117469184, 'code': 131077}]
    32. 

  32. 2026-09-28 23:52:05,697 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    33. 

  33. 2026-09-28 23:52:05,697 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    34. 

  34. 2026-09-28 23:52:05,818 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    35. 

  35. 2026-09-28 23:52:05,818 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    36. 

  36. 2026-09-28 23:52:05,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    37. 

  37. 2026-09-28 23:52:05,819 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    38. 

  38. 2026-09-28 23:52:05,820 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    39. 

  39. 2026-09-28 23:52:05,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    40. 

  40. 2026-09-28 23:52:05,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    41. 

  41. 2026-09-28 23:52:05,821 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    42. 

  42. 2026-09-28 23:52:05,822 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    43. 

  43. 2026-09-28 23:52:05,823 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    44. 

  44. 2026-09-28 23:52:06,286 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    45. 

  45. 2026-09-28 23:52:06,287 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    46. 

  46. 2026-09-28 23:52:06,287 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    47. 

  47. 2026-09-28 23:52:06,288 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    48. 

  48. 2026-09-28 23:52:06,288 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    49. 

  49. 2026-09-28 23:52:06,289 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    50. 

  50. 2026-09-28 23:52:06,289 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    51. 

  51. 2026-09-28 23:52:06,289 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    52. 

  52. 2026-09-28 23:52:06,290 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    53. 

  53. 2026-09-28 23:52:06,290 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    54. 

  54. 2026-09-28 23:52:06,374 INFO [uvicorn.access] [-] [IP]:42358 - "POST /api/v1/spoolbuddy/devices/spoolbuddy-scale-3bplus/heartbeat HTTP/1.1" 200
    55. 

  55. 2026-09-28 23:52:06,677 INFO [uvicorn.access] [-] [IP]:42370 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    56. 

  56. 2026-09-28 23:52:06,707 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    57. 

  57. 2026-09-28 23:52:06,708 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    58. 

  58. 2026-09-28 23:52:06,708 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    59. 

  59. 2026-09-28 23:52:06,709 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    60. 

  60. 2026-09-28 23:52:06,709 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    61. 

  61. 2026-09-28 23:52:06,710 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    62. 

  62. 2026-09-28 23:52:06,710 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    63. 

  63. 2026-09-28 23:52:06,710 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 117469184, 'code': 131077}]
    64. 

  64. 2026-09-28 23:52:06,711 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    65. 

  65. 2026-09-28 23:52:06,712 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    66. 

  66. 2026-09-28 23:52:06,843 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    67. 

  67. 2026-09-28 23:52:06,843 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    68. 

  68. 2026-09-28 23:52:06,844 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    69. 

  69. 2026-09-28 23:52:06,845 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    70. 

  70. 2026-09-28 23:52:06,845 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    71. 

  71. 2026-09-28 23:52:06,846 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    72. 

  72. 2026-09-28 23:52:06,846 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    73. 

  73. 2026-09-28 23:52:06,847 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    74. 

  74. 2026-09-28 23:52:06,848 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    75. 

  75. 2026-09-28 23:52:06,849 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    76. 

  76. 2026-09-28 23:52:07,298 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    77. 

  77. 2026-09-28 23:52:07,298 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    78. 

  78. 2026-09-28 23:52:07,299 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    79. 

  79. 2026-09-28 23:52:07,300 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    80. 

  80. 2026-09-28 23:52:07,320 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    81. 

  81. 2026-09-28 23:52:07,326 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    82. 

  82. 2026-09-28 23:52:07,328 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    83. 

  83. 2026-09-28 23:52:07,336 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    84. 

  84. 2026-09-28 23:52:07,339 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    85. 

  85. 2026-09-28 23:52:07,340 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    86. 

  86. 2026-09-28 23:52:07,453 DEBUG [backend.app.api.routes.printers] [84581d29] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    87. 

  87. 2026-09-28 23:52:07,454 DEBUG [backend.app.api.routes.printers] [84581d29] Using tray_now directly as global ID: 10
    88. 

  88. 2026-09-28 23:52:07,466 DEBUG [backend.app.api.routes.printers] [eb53633b] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    89. 

  89. 2026-09-28 23:52:07,467 DEBUG [backend.app.api.routes.printers] [eb53633b] Using tray_now directly as global ID: 7
    90. 

  90. 2026-09-28 23:52:07,519 DEBUG [backend.app.api.routes.printers] [8d123449] API returning ams_mapping: [], ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    91. 

  91. 2026-09-28 23:52:07,519 DEBUG [backend.app.api.routes.printers] [8d123449] Using tray_now directly as global ID: 6
    92. 

  92. 2026-09-28 23:52:07,739 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    93. 

  93. 2026-09-28 23:52:07,739 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    94. 

  94. 2026-09-28 23:52:07,740 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    95. 

  95. 2026-09-28 23:52:07,740 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    96. 

  96. 2026-09-28 23:52:07,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    97. 

  97. 2026-09-28 23:52:07,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    98. 

  98. 2026-09-28 23:52:07,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    99. 

  99. 2026-09-28 23:52:07,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 117469184, 'code': 131077}]
    100. 

  100. 2026-09-28 23:52:07,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    101. 

  101. 2026-09-28 23:52:07,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    102. 

  102. 2026-09-28 23:52:07,865 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    103. 

  103. 2026-09-28 23:52:07,866 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    104. 

  104. 2026-09-28 23:52:07,866 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    105. 

  105. 2026-09-28 23:52:07,867 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    106. 

  106. 2026-09-28 23:52:07,868 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    107. 

  107. 2026-09-28 23:52:07,869 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    108. 

  108. 2026-09-28 23:52:07,870 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    109. 

  109. 2026-09-28 23:52:07,870 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    110. 

  110. 2026-09-28 23:52:07,871 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    111. 

  111. 2026-09-28 23:52:07,873 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    112. 

  112. 2026-09-28 23:52:08,004 INFO [backend.app.services.print_scheduler] [-] Queue check: found 2 pending items: [(249, 1, None, 708), (269, 2, None, 758)]
    113. 

  113. 2026-09-28 23:52:08,095 INFO [uvicorn.access] [-] [IP]:42390 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    114. 

  114. 2026-09-28 23:52:08,263 INFO [backend.app.services.print_scheduler] [-] Queue: printer 1 unavailable — an item is already printing on it (now: connected=True, state=RUNNING, awaiting_plate_clear=False)
    115. 

  115. 2026-09-28 23:52:08,264 INFO [backend.app.services.print_scheduler] [-] Queue: printer 2 unavailable — an item is already printing on it (now: connected=True, state=RUNNING, awaiting_plate_clear=False)
    116. 

  116. 2026-09-28 23:52:08,264 INFO [backend.app.services.print_scheduler] [-] Queue: printer 3 unavailable — an item is already printing on it (now: connected=True, state=RUNNING, awaiting_plate_clear=False)
    117. 

  117. 2026-09-28 23:52:08,324 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    118. 

  118. 2026-09-28 23:52:08,324 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    119. 

  119. 2026-09-28 23:52:08,324 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    120. 

  120. 2026-09-28 23:52:08,325 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    121. 

  121. 2026-09-28 23:52:08,326 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    122. 

  122. 2026-09-28 23:52:08,326 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    123. 

  123. 2026-09-28 23:52:08,327 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    124. 

  124. 2026-09-28 23:52:08,327 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    125. 

  125. 2026-09-28 23:52:08,330 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    126. 

  126. 2026-09-28 23:52:08,334 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    127. 

  127. 2026-09-28 23:52:08,609 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 1 — checking 3 AMS units
    128. 

  128. 2026-09-28 23:52:08,609 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 1 AMS 0 skipped — module_type=ams
    129. 

  129. 2026-09-28 23:52:08,609 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 1 AMS 1 skipped — module_type=ams
    130. 

  130. 2026-09-28 23:52:08,609 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 1 AMS 2 skipped — module_type=ams
    131. 

  131. 2026-09-28 23:52:08,610 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 2 — checking 3 AMS units
    132. 

  132. 2026-09-28 23:52:08,610 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 2 AMS 0 skipped — module_type=ams
    133. 

  133. 2026-09-28 23:52:08,610 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 2 AMS 1 skipped — module_type=ams
    134. 

  134. 2026-09-28 23:52:08,610 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 2 AMS 2 skipped — module_type=ams
    135. 

  135. 2026-09-28 23:52:08,610 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 3 — checking 3 AMS units
    136. 

  136. 2026-09-28 23:52:08,610 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 3 AMS 0 skipped — module_type=ams
    137. 

  137. 2026-09-28 23:52:08,611 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 3 AMS 1 skipped — module_type=ams
    138. 

  138. 2026-09-28 23:52:08,611 DEBUG [backend.app.services.print_scheduler] [-] Auto-drying: printer 3 AMS 2 skipped — module_type=ams
    139. 

  139. 2026-09-28 23:52:08,762 INFO [uvicorn.access] [-] [IP]:42426 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    140. 

  140. 2026-09-28 23:52:08,792 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    141. 

  141. 2026-09-28 23:52:08,803 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    142. 

  142. 2026-09-28 23:52:08,810 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    143. 

  143. 2026-09-28 23:52:08,814 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    144. 

  144. 2026-09-28 23:52:08,817 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    145. 

  145. 2026-09-28 23:52:08,818 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    146. 

  146. 2026-09-28 23:52:08,823 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    147. 

  147. 2026-09-28 23:52:08,824 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 117469184, 'code': 131077}]
    148. 

  148. 2026-09-28 23:52:08,825 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    149. 

  149. 2026-09-28 23:52:08,826 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    150. 

  150. 2026-09-28 23:52:08,893 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    151. 

  151. 2026-09-28 23:52:08,894 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    152. 

  152. 2026-09-28 23:52:08,894 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    153. 

  153. 2026-09-28 23:52:08,896 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    154. 

  154. 2026-09-28 23:52:08,904 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    155. 

  155. 2026-09-28 23:52:08,908 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    156. 

  156. 2026-09-28 23:52:08,909 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    157. 

  157. 2026-09-28 23:52:08,911 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    158. 

  158. 2026-09-28 23:52:08,912 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    159. 

  159. 2026-09-28 23:52:08,914 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    160. 

  160. 2026-09-28 23:52:09,349 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    161. 

  161. 2026-09-28 23:52:09,349 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    162. 

  162. 2026-09-28 23:52:09,350 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    163. 

  163. 2026-09-28 23:52:09,351 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    164. 

  164. 2026-09-28 23:52:09,352 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    165. 

  165. 2026-09-28 23:52:09,353 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    166. 

  166. 2026-09-28 23:52:09,353 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    167. 

  167. 2026-09-28 23:52:09,354 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    168. 

  168. 2026-09-28 23:52:09,354 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    169. 

  169. 2026-09-28 23:52:09,355 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    170. 

  170. 2026-09-28 23:52:09,771 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    171. 

  171. 2026-09-28 23:52:09,774 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    172. 

  172. 2026-09-28 23:52:09,774 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    173. 

  173. 2026-09-28 23:52:09,776 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    174. 

  174. 2026-09-28 23:52:09,777 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    175. 

  175. 2026-09-28 23:52:09,778 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    176. 

  176. 2026-09-28 23:52:09,779 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    177. 

  177. 2026-09-28 23:52:09,781 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: [{'attr': 117469184, 'code': 131077}]
    178. 

  178. 2026-09-28 23:52:09,782 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    179. 

  179. 2026-09-28 23:52:09,783 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: Supersquared_7_Caps_and_7_Wheels_-_Smoke_PETG_-_Foopie
    180. 

  180. 2026-09-28 23:52:09,943 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    181. 

  181. 2026-09-28 23:52:09,944 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    182. 

  182. 2026-09-28 23:52:09,945 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    183. 

  183. 2026-09-28 23:52:09,947 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    184. 

  184. 2026-09-28 23:52:09,949 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    185. 

  185. 2026-09-28 23:52:09,956 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    186. 

  186. 2026-09-28 23:52:09,957 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    187. 

  187. 2026-09-28 23:52:09,958 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    188. 

  188. 2026-09-28 23:52:09,963 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    189. 

  189. 2026-09-28 23:52:09,964 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Rear_Frames_-_Matte_Charcoal_-_Magi_-_Carbon_Fiber
    190. 

  190. 2026-09-28 23:52:10,055 INFO [uvicorn.access] [-] [IP]:42480 - "POST /api/v1/spoolbuddy/scale/reading HTTP/1.1" 200
    191. 

  191. 2026-09-28 23:52:10,349 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    192. 

  192. 2026-09-28 23:52:10,350 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    193. 

  193. 2026-09-28 23:52:10,352 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    194. 

  194. 2026-09-28 23:52:10,353 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_extruder_map: {'0': 0, '1': 0, '2': 0}
    195. 

  195. 2026-09-28 23:52:10,354 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    196. 

  196. 2026-09-28 23:52:10,355 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 40.0
    197. 

  197. 2026-09-28 23:52:10,356 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 40.0°C (heater OFF)
    198. 

  198. 2026-09-28 23:52:10,357 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    199. 

  199. 2026-09-28 23:52:10,358 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    200. 

  200. 2026-09-28 23:52:10,359 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_16_Front_Frames_-_Charcoal_Mistletoe_-_Quadrahedron_-_Carbon_Fiber
    201.