Inicio Explorar Axuda
Iniciar sesión
yunoadmin
/
bambuddy
réplica de https://github.com/maziggy/bambuddy
1
0
Fork 0
Ficheiros Incidencias 0 Wiki
Árbore: 2fffdfc857
Ramas Etiquetas
bambuddy
/
logs
/
373a9ae62ffa404f89898d235015bd88.log

373a9ae62ffa404f89898d235015bd88.log 36 KB
Histórico Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-09-13 21:24:58,048 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    2. 

  2. 2026-09-13 21:24:58,048 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    3. 

  3. 2026-09-13 21:24:58,049 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    4. 

  4. 2026-09-13 21:24:58,049 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    5. 

  5. 2026-09-13 21:24:58,049 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    6. 

  6. 2026-09-13 21:24:58,050 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    7. 

  7. 2026-09-13 21:24:58,050 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    8. 

  8. 2026-09-13 21:24:58,051 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    9. 

  9. 2026-09-13 21:24:58,512 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:44383
    10. 

  10. 2026-09-13 21:24:58,513 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    11. 

  11. 2026-09-13 21:24:58,605 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    12. 

  12. 2026-09-13 21:24:58,606 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    13. 

  13. 2026-09-13 21:24:58,606 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    14. 

  14. 2026-09-13 21:24:58,607 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    15. 

  15. 2026-09-13 21:24:58,608 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
    16. 

  16. 2026-09-13 21:24:58,608 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
    17. 

  17. 2026-09-13 21:24:58,608 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    18. 

  18. 2026-09-13 21:24:58,609 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    19. 

  19. 2026-09-13 21:24:58,610 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    20. 

  20. 2026-09-13 21:24:58,864 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    21. 

  21. 2026-09-13 21:24:58,871 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    22. 

  22. 2026-09-13 21:24:58,873 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    23. 

  23. 2026-09-13 21:24:58,880 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    24. 

  24. 2026-09-13 21:24:58,884 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
    25. 

  25. 2026-09-13 21:24:58,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
    26. 

  26. 2026-09-13 21:24:58,887 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    27. 

  27. 2026-09-13 21:24:58,888 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    28. 

  28. 2026-09-13 21:24:58,889 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    29. 

  29. 2026-09-13 21:24:59,130 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    30. 

  30. 2026-09-13 21:24:59,132 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    31. 

  31. 2026-09-13 21:24:59,136 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    32. 

  32. 2026-09-13 21:24:59,139 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    33. 

  33. 2026-09-13 21:24:59,142 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    34. 

  34. 2026-09-13 21:24:59,146 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    35. 

  35. 2026-09-13 21:24:59,154 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    36. 

  36. 2026-09-13 21:24:59,158 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    37. 

  37. 2026-09-13 21:24:59,160 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    38. 

  38. 2026-09-13 21:24:59,190 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 178795 bytes
    39. 

  39. 2026-09-13 21:24:59,198 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 178795 bytes
    40. 

  40. 2026-09-13 21:24:59,199 DEBUG [backend.app.main] [-] [FINISH-PHOTO-BANK] banked in-print frame for printer 2 at layer 2/47 (178795 bytes)
    41. 

  41. 2026-09-13 21:24:59,616 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    42. 

  42. 2026-09-13 21:24:59,617 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    43. 

  43. 2026-09-13 21:24:59,618 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    44. 

  44. 2026-09-13 21:24:59,619 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    45. 

  45. 2026-09-13 21:24:59,620 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
    46. 

  46. 2026-09-13 21:24:59,620 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
    47. 

  47. 2026-09-13 21:24:59,621 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    48. 

  48. 2026-09-13 21:24:59,621 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    49. 

  49. 2026-09-13 21:24:59,622 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    50. 

  50. 2026-09-13 21:24:59,871 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    51. 

  51. 2026-09-13 21:24:59,874 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    52. 

  52. 2026-09-13 21:24:59,874 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    53. 

  53. 2026-09-13 21:24:59,879 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    54. 

  54. 2026-09-13 21:24:59,880 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
    55. 

  55. 2026-09-13 21:24:59,883 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
    56. 

  56. 2026-09-13 21:24:59,889 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    57. 

  57. 2026-09-13 21:24:59,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    58. 

  58. 2026-09-13 21:24:59,895 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    59. 

  59. 2026-09-13 21:25:00,139 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    60. 

  60. 2026-09-13 21:25:00,141 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    61. 

  61. 2026-09-13 21:25:00,143 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    62. 

  62. 2026-09-13 21:25:00,147 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    63. 

  63. 2026-09-13 21:25:00,148 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    64. 

  64. 2026-09-13 21:25:00,148 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    65. 

  65. 2026-09-13 21:25:00,149 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    66. 

  66. 2026-09-13 21:25:00,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    67. 

  67. 2026-09-13 21:25:00,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    68. 

  68. 2026-09-13 21:25:00,649 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    69. 

  69. 2026-09-13 21:25:00,649 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    70. 

  70. 2026-09-13 21:25:00,650 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    71. 

  71. 2026-09-13 21:25:00,651 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    72. 

  72. 2026-09-13 21:25:00,651 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
    73. 

  73. 2026-09-13 21:25:00,652 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
    74. 

  74. 2026-09-13 21:25:00,652 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    75. 

  75. 2026-09-13 21:25:00,653 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    76. 

  76. 2026-09-13 21:25:00,653 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    77. 

  77. 2026-09-13 21:25:00,889 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    78. 

  78. 2026-09-13 21:25:00,890 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    79. 

  79. 2026-09-13 21:25:00,896 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    80. 

  80. 2026-09-13 21:25:00,897 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    81. 

  81. 2026-09-13 21:25:00,898 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
    82. 

  82. 2026-09-13 21:25:00,899 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
    83. 

  83. 2026-09-13 21:25:00,901 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    84. 

  84. 2026-09-13 21:25:00,903 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    85. 

  85. 2026-09-13 21:25:00,905 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    86. 

  86. 2026-09-13 21:25:00,951 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 123010 bytes
    87. 

  87. 2026-09-13 21:25:01,148 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    88. 

  88. 2026-09-13 21:25:01,149 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    89. 

  89. 2026-09-13 21:25:01,149 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    90. 

  90. 2026-09-13 21:25:01,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    91. 

  91. 2026-09-13 21:25:01,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    92. 

  92. 2026-09-13 21:25:01,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    93. 

  93. 2026-09-13 21:25:01,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    94. 

  94. 2026-09-13 21:25:01,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    95. 

  95. 2026-09-13 21:25:01,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    96. 

  96. 2026-09-13 21:25:01,611 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:39485
    97. 

  97. 2026-09-13 21:25:01,612 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    98. 

  98. 2026-09-13 21:25:01,653 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    99. 

  99. 2026-09-13 21:25:01,654 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    100. 

  100. 2026-09-13 21:25:01,654 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    101. 

  101. 2026-09-13 21:25:01,655 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    102. 

  102. 2026-09-13 21:25:01,656 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
    103. 

  103. 2026-09-13 21:25:01,656 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
    104. 

  104. 2026-09-13 21:25:01,656 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    105. 

  105. 2026-09-13 21:25:01,657 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    106. 

  106. 2026-09-13 21:25:01,658 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    107. 

  107. 2026-09-13 21:25:01,901 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    108. 

  108. 2026-09-13 21:25:01,901 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    109. 

  109. 2026-09-13 21:25:01,901 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    110. 

  110. 2026-09-13 21:25:01,902 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '7', 'ams_exist_bits_raw': '7', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'fe7', 'tray_is_bbl_bits': 'fe7', 'tray_now': '2', 'tray_pre': '2', 'tray_read_done_bits': 'fe7', 'tray_reading_bits': '0', 'tray_tar': '2', 'version': 359910}
    111. 

  111. 2026-09-13 21:25:01,902 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    112. 

  112. 2026-09-13 21:25:01,903 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
    113. 

  113. 2026-09-13 21:25:01,903 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
    114. 

  114. 2026-09-13 21:25:01,904 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    115. 

  115. 2026-09-13 21:25:01,904 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    116. 

  116. 2026-09-13 21:25:01,904 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    117. 

  117. 2026-09-13 21:25:02,165 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    118. 

  118. 2026-09-13 21:25:02,166 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    119. 

  119. 2026-09-13 21:25:02,166 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    120. 

  120. 2026-09-13 21:25:02,167 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    121. 

  121. 2026-09-13 21:25:02,168 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    122. 

  122. 2026-09-13 21:25:02,168 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    123. 

  123. 2026-09-13 21:25:02,169 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    124. 

  124. 2026-09-13 21:25:02,170 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    125. 

  125. 2026-09-13 21:25:02,170 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    126. 

  126. 2026-09-13 21:25:02,692 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    127. 

  127. 2026-09-13 21:25:02,693 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    128. 

  128. 2026-09-13 21:25:02,693 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    129. 

  129. 2026-09-13 21:25:02,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    130. 

  130. 2026-09-13 21:25:02,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
    131. 

  131. 2026-09-13 21:25:02,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
    132. 

  132. 2026-09-13 21:25:02,695 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    133. 

  133. 2026-09-13 21:25:02,695 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    134. 

  134. 2026-09-13 21:25:02,696 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    135. 

  135. 2026-09-13 21:25:02,914 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    136. 

  136. 2026-09-13 21:25:02,915 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    137. 

  137. 2026-09-13 21:25:02,915 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    138. 

  138. 2026-09-13 21:25:02,916 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    139. 

  139. 2026-09-13 21:25:02,917 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
    140. 

  140. 2026-09-13 21:25:02,917 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
    141. 

  141. 2026-09-13 21:25:02,918 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    142. 

  142. 2026-09-13 21:25:02,918 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    143. 

  143. 2026-09-13 21:25:02,919 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    144. 

  144. 2026-09-13 21:25:03,191 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    145. 

  145. 2026-09-13 21:25:03,200 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    146. 

  146. 2026-09-13 21:25:03,201 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    147. 

  147. 2026-09-13 21:25:03,207 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    148. 

  148. 2026-09-13 21:25:03,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    149. 

  149. 2026-09-13 21:25:03,222 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    150. 

  150. 2026-09-13 21:25:03,223 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    151. 

  151. 2026-09-13 21:25:03,235 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    152. 

  152. 2026-09-13 21:25:03,237 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    153. 

  153. 2026-09-13 21:25:03,482 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 155070 bytes
    154. 

  154. 2026-09-13 21:25:03,735 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    155. 

  155. 2026-09-13 21:25:03,738 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    156. 

  156. 2026-09-13 21:25:03,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    157. 

  157. 2026-09-13 21:25:03,743 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    158. 

  158. 2026-09-13 21:25:03,743 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
    159. 

  159. 2026-09-13 21:25:03,746 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
    160. 

  160. 2026-09-13 21:25:03,751 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    161. 

  161. 2026-09-13 21:25:03,751 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    162. 

  162. 2026-09-13 21:25:03,752 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    163. 

  163. 2026-09-13 21:25:03,941 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    164. 

  164. 2026-09-13 21:25:03,945 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    165. 

  165. 2026-09-13 21:25:03,949 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    166. 

  166. 2026-09-13 21:25:03,951 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    167. 

  167. 2026-09-13 21:25:03,953 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
    168. 

  168. 2026-09-13 21:25:03,959 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
    169. 

  169. 2026-09-13 21:25:03,960 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    170. 

  170. 2026-09-13 21:25:03,961 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    171. 

  171. 2026-09-13 21:25:03,961 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    172. 

  172. 2026-09-13 21:25:04,191 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    173. 

  173. 2026-09-13 21:25:04,192 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    174. 

  174. 2026-09-13 21:25:04,192 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    175. 

  175. 2026-09-13 21:25:04,193 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    176. 

  176. 2026-09-13 21:25:04,193 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
    177. 

  177. 2026-09-13 21:25:04,193 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
    178. 

  178. 2026-09-13 21:25:04,194 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    179. 

  179. 2026-09-13 21:25:04,194 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    180. 

  180. 2026-09-13 21:25:04,195 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
    181. 

  181. 2026-09-13 21:25:04,304 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:46171
    182. 

  182. 2026-09-13 21:25:04,304 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
    183. 

  183. 2026-09-13 21:25:04,739 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    184. 

  184. 2026-09-13 21:25:04,739 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    185. 

  185. 2026-09-13 21:25:04,740 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    186. 

  186. 2026-09-13 21:25:04,740 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    187. 

  187. 2026-09-13 21:25:04,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
    188. 

  188. 2026-09-13 21:25:04,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
    189. 

  189. 2026-09-13 21:25:04,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    190. 

  190. 2026-09-13 21:25:04,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    191. 

  191. 2026-09-13 21:25:04,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
    192. 

  192. 2026-09-13 21:25:04,970 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    193. 

  193. 2026-09-13 21:25:04,970 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    194. 

  194. 2026-09-13 21:25:04,970 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    195. 

  195. 2026-09-13 21:25:04,971 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    196. 

  196. 2026-09-13 21:25:04,971 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
    197. 

  197. 2026-09-13 21:25:04,972 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
    198. 

  198. 2026-09-13 21:25:04,972 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    199. 

  199. 2026-09-13 21:25:04,973 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    200. 

  200. 2026-09-13 21:25:04,973 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
    201.