bambuddy/backend/tests/unit/services/test_bambu_mqtt.py

"""
Tests for the BambuMQTTClient service.

These tests focus on timelapse tracking during prints.
"""

import pytest


class TestTimelapseTracking:
    """Tests for timelapse state tracking during prints."""

    @pytest.fixture
    def mqtt_client(self):
        """Create a BambuMQTTClient instance for testing."""
        from backend.app.services.bambu_mqtt import BambuMQTTClient

        client = BambuMQTTClient(
            ip_address="192.168.1.100",
            serial_number="TEST123",
            access_code="12345678",
        )
        return client

    def test_timelapse_flag_initializes_to_false(self, mqtt_client):
        """Verify _timelapse_during_print starts as False."""
        assert mqtt_client._timelapse_during_print is False

    def test_timelapse_flag_set_when_timelapse_active_during_running(self, mqtt_client):
        """Verify timelapse flag is set when timelapse is active while printing."""
        # Simulate print running
        mqtt_client._was_running = True
        mqtt_client.state.timelapse = False

        # Simulate xcam data showing timelapse is enabled
        xcam_data = {"timelapse": "enable"}
        mqtt_client._parse_xcam_data(xcam_data)

        assert mqtt_client.state.timelapse is True
        assert mqtt_client._timelapse_during_print is True

    def test_timelapse_flag_not_set_when_not_running(self, mqtt_client):
        """Verify timelapse flag is NOT set when printer not running."""
        # Printer is idle (not running)
        mqtt_client._was_running = False
        mqtt_client.state.timelapse = False

        # Timelapse is enabled but we're not printing
        xcam_data = {"timelapse": "enable"}
        mqtt_client._parse_xcam_data(xcam_data)

        assert mqtt_client.state.timelapse is True
        # Flag should NOT be set since we're not printing
        assert mqtt_client._timelapse_during_print is False

    def test_timelapse_flag_persists_after_timelapse_stops(self, mqtt_client):
        """Verify timelapse flag stays True even after recording stops."""
        # Simulate print running with timelapse
        mqtt_client._was_running = True

        # Enable timelapse during print
        xcam_data = {"timelapse": "enable"}
        mqtt_client._parse_xcam_data(xcam_data)
        assert mqtt_client._timelapse_during_print is True

        # Disable timelapse (recording stops at end of print)
        xcam_data = {"timelapse": "disable"}
        mqtt_client._parse_xcam_data(xcam_data)

        # Flag should still be True (persists until reset)
        assert mqtt_client.state.timelapse is False
        assert mqtt_client._timelapse_during_print is True

    def test_timelapse_flag_from_print_data(self, mqtt_client):
        """Verify timelapse flag is set from print data (not just xcam)."""
        # Simulate print running
        mqtt_client._was_running = True
        mqtt_client.state.timelapse = False
        mqtt_client._timelapse_during_print = False

        # Manually test the timelapse parsing logic from _parse_print_data
        # This tests the "timelapse" field in the main print data
        data = {"timelapse": True}
        mqtt_client.state.timelapse = data["timelapse"] is True
        if mqtt_client.state.timelapse and mqtt_client._was_running:
            mqtt_client._timelapse_during_print = True

        assert mqtt_client._timelapse_during_print is True


class TestPrintCompletionWithTimelapse:
    """Tests for print completion including timelapse flag."""

    @pytest.fixture
    def mqtt_client(self):
        """Create a BambuMQTTClient instance for testing."""
        from backend.app.services.bambu_mqtt import BambuMQTTClient

        client = BambuMQTTClient(
            ip_address="192.168.1.100",
            serial_number="TEST123",
            access_code="12345678",
        )
        return client

    def test_print_complete_includes_timelapse_flag(self, mqtt_client):
        """Verify print complete callback includes timelapse_was_active."""
        # Set up completion callback
        callback_data = {}

        def on_complete(data):
            callback_data.update(data)

        mqtt_client.on_print_complete = on_complete

        # Simulate a print that had timelapse active
        mqtt_client._was_running = True
        mqtt_client._completion_triggered = False
        mqtt_client._timelapse_during_print = True
        mqtt_client._previous_gcode_state = "RUNNING"
        mqtt_client._previous_gcode_file = "test.gcode"
        mqtt_client.state.subtask_name = "Test Print"

        # Simulate print finish
        mqtt_client.state.state = "FINISH"

        # Manually trigger the completion logic (simplified)
        # In real code this happens in _parse_print_data
        should_trigger = (
            mqtt_client.state.state in ("FINISH", "FAILED")
            and not mqtt_client._completion_triggered
            and mqtt_client.on_print_complete
            and mqtt_client._previous_gcode_state == "RUNNING"
        )

        if should_trigger:
            status = "completed" if mqtt_client.state.state == "FINISH" else "failed"
            timelapse_was_active = mqtt_client._timelapse_during_print
            mqtt_client._completion_triggered = True
            mqtt_client._was_running = False
            mqtt_client._timelapse_during_print = False
            mqtt_client.on_print_complete(
                {
                    "status": status,
                    "filename": mqtt_client._previous_gcode_file,
                    "subtask_name": mqtt_client.state.subtask_name,
                    "timelapse_was_active": timelapse_was_active,
                }
            )

        assert "timelapse_was_active" in callback_data
        assert callback_data["timelapse_was_active"] is True

    def test_print_complete_timelapse_flag_false_when_no_timelapse(self, mqtt_client):
        """Verify timelapse_was_active is False when no timelapse during print."""
        callback_data = {}

        def on_complete(data):
            callback_data.update(data)

        mqtt_client.on_print_complete = on_complete

        # Print without timelapse
        mqtt_client._was_running = True
        mqtt_client._completion_triggered = False
        mqtt_client._timelapse_during_print = False  # No timelapse
        mqtt_client._previous_gcode_state = "RUNNING"
        mqtt_client._previous_gcode_file = "test.gcode"
        mqtt_client.state.subtask_name = "Test Print"
        mqtt_client.state.state = "FINISH"

        # Trigger completion
        timelapse_was_active = mqtt_client._timelapse_during_print
        mqtt_client.on_print_complete(
            {
                "status": "completed",
                "filename": mqtt_client._previous_gcode_file,
                "subtask_name": mqtt_client.state.subtask_name,
                "timelapse_was_active": timelapse_was_active,
            }
        )

        assert callback_data["timelapse_was_active"] is False

    def test_timelapse_flag_reset_after_completion(self, mqtt_client):
        """Verify _timelapse_during_print is reset after print completion."""
        mqtt_client._timelapse_during_print = True
        mqtt_client._was_running = True
        mqtt_client._completion_triggered = False

        # Simulate completion reset
        mqtt_client._completion_triggered = True
        mqtt_client._was_running = False
        mqtt_client._timelapse_during_print = False

        assert mqtt_client._timelapse_during_print is False


class TestRealisticMessageFlow:
    """Tests that simulate realistic MQTT message sequences.

    These tests process messages through _process_message to test the full flow,
    including the order of xcam parsing vs state detection.
    """

    @pytest.fixture
    def mqtt_client(self):
        """Create a BambuMQTTClient instance for testing."""
        from backend.app.services.bambu_mqtt import BambuMQTTClient

        client = BambuMQTTClient(
            ip_address="192.168.1.100",
            serial_number="TEST123",
            access_code="12345678",
        )
        return client

    def test_timelapse_detected_at_print_start_in_same_message(self, mqtt_client):
        """Test that timelapse is detected when xcam and state come in same message.

        This is the critical race condition test - xcam data is parsed BEFORE
        state detection, so the timelapse flag must be set AFTER _was_running is True.
        """
        # Callbacks to track events
        start_callback_data = {}

        def on_start(data):
            start_callback_data.update(data)

        mqtt_client.on_print_start = on_start

        # Initial state - idle
        mqtt_client._was_running = False
        mqtt_client._timelapse_during_print = False
        mqtt_client._previous_gcode_state = None

        # Simulate first message when print starts - contains both xcam and gcode_state
        # This is the realistic scenario from the printer
        # NOTE: Real MQTT messages wrap print data inside a "print" key
        payload = {
            "print": {
                "gcode_state": "RUNNING",
                "gcode_file": "/data/Metadata/test_print.gcode",
                "subtask_name": "Test_Print",
                "xcam": {
                    "timelapse": "enable",  # Timelapse is enabled in this print
                    "printing_monitor": True,
                },
                "mc_percent": 0,
                "mc_remaining_time": 3600,
            }
        }

        # Process the message (this is what happens in real MQTT flow)
        mqtt_client._process_message(payload)

        # Verify timelapse was detected even though xcam is parsed before state
        assert mqtt_client._was_running is True, "_was_running should be True after RUNNING state"
        assert mqtt_client.state.timelapse is True, "state.timelapse should be True"
        assert mqtt_client._timelapse_during_print is True, (
            "timelapse_during_print should be True when timelapse is in the same message as RUNNING state"
        )

    def test_timelapse_not_detected_when_disabled(self, mqtt_client):
        """Test that timelapse is NOT detected when disabled in xcam data."""
        mqtt_client.on_print_start = lambda data: None

        # Initial state - idle
        mqtt_client._was_running = False
        mqtt_client._timelapse_during_print = False
        mqtt_client._previous_gcode_state = None

        # Print starts without timelapse
        payload = {
            "print": {
                "gcode_state": "RUNNING",
                "gcode_file": "/data/Metadata/test_print.gcode",
                "subtask_name": "Test_Print",
                "xcam": {
                    "timelapse": "disable",  # Timelapse is disabled
                    "printing_monitor": True,
                },
            }
        }

        mqtt_client._process_message(payload)

        assert mqtt_client._was_running is True
        assert mqtt_client.state.timelapse is False
        assert mqtt_client._timelapse_during_print is False

    def test_timelapse_detected_when_enabled_after_print_start(self, mqtt_client):
        """Test timelapse detected when enabled in a message after print starts."""
        mqtt_client.on_print_start = lambda data: None

        # First message - print starts without timelapse info
        payload_start = {
            "print": {
                "gcode_state": "RUNNING",
                "gcode_file": "/data/Metadata/test_print.gcode",
                "subtask_name": "Test_Print",
            }
        }
        mqtt_client._process_message(payload_start)

        assert mqtt_client._was_running is True
        assert mqtt_client._timelapse_during_print is False  # Not detected yet

        # Second message - xcam data arrives with timelapse enabled
        payload_xcam = {
            "print": {
                "gcode_state": "RUNNING",
                "gcode_file": "/data/Metadata/test_print.gcode",
                "subtask_name": "Test_Print",
                "xcam": {
                    "timelapse": "enable",
                },
            }
        }
        mqtt_client._process_message(payload_xcam)

        # Now timelapse should be detected because _was_running is already True
        assert mqtt_client._timelapse_during_print is True

    def test_print_complete_includes_timelapse_flag_full_flow(self, mqtt_client):
        """Test full print lifecycle with timelapse - from start to completion."""
        start_data = {}
        complete_data = {}

        def on_start(data):
            start_data.update(data)

        def on_complete(data):
            complete_data.update(data)

        mqtt_client.on_print_start = on_start
        mqtt_client.on_print_complete = on_complete

        # 1. Print starts with timelapse
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "RUNNING",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                    "xcam": {"timelapse": "enable"},
                }
            }
        )

        assert mqtt_client._timelapse_during_print is True
        assert "subtask_name" in start_data

        # 2. Print continues (multiple messages)
        for _ in range(3):
            mqtt_client._process_message(
                {
                    "print": {
                        "gcode_state": "RUNNING",
                        "gcode_file": "/data/Metadata/test.gcode",
                        "subtask_name": "Test",
                        "mc_percent": 50,
                    }
                }
            )

        # Timelapse flag should still be True
        assert mqtt_client._timelapse_during_print is True

        # 3. Print completes
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "FINISH",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                }
            }
        )

        # Verify completion callback received timelapse flag
        assert "timelapse_was_active" in complete_data
        assert complete_data["timelapse_was_active"] is True
        assert complete_data["status"] == "completed"

        # Flags should be reset after completion
        assert mqtt_client._timelapse_during_print is False
        assert mqtt_client._was_running is False

    def test_print_failed_includes_timelapse_flag(self, mqtt_client):
        """Test that failed print also includes timelapse flag."""
        complete_data = {}

        def on_complete(data):
            complete_data.update(data)

        mqtt_client.on_print_start = lambda data: None
        mqtt_client.on_print_complete = on_complete

        # Start with timelapse
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "RUNNING",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                    "xcam": {"timelapse": "enable"},
                }
            }
        )

        # Print fails
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "FAILED",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                }
            }
        )

        assert complete_data["timelapse_was_active"] is True
        assert complete_data["status"] == "failed"


class TestAMSDataMerging:
    """Tests for AMS data merging, particularly handling empty slots."""

    @pytest.fixture
    def mqtt_client(self):
        """Create a BambuMQTTClient instance for testing."""
        from backend.app.services.bambu_mqtt import BambuMQTTClient

        client = BambuMQTTClient(
            ip_address="192.168.1.100",
            serial_number="TEST123",
            access_code="12345678",
        )
        return client

    def test_empty_slot_clears_tray_type(self, mqtt_client):
        """Test that empty slot update clears tray_type (Issue #147).

        When a spool is removed from an old AMS, the printer sends empty values.
        These must overwrite the previous values to show the slot as empty.
        """
        # Initial state: AMS unit with a loaded spool
        initial_ams = {
            "ams": [
                {
                    "id": 0,
                    "tray": [
                        {
                            "id": 0,
                            "tray_type": "PLA",
                            "tray_sub_brands": "Bambu PLA Basic",
                            "tray_color": "FF0000",
                            "tag_uid": "1234567890ABCDEF",
                            "remain": 80,
                        }
                    ],
                }
            ]
        }
        mqtt_client._handle_ams_data(initial_ams)

        # Verify initial state
        ams_data = mqtt_client.state.raw_data.get("ams", [])
        assert len(ams_data) == 1
        tray = ams_data[0]["tray"][0]
        assert tray["tray_type"] == "PLA"
        assert tray["tray_color"] == "FF0000"

        # Now simulate spool removal - printer sends empty values
        empty_update = {
            "ams": [
                {
                    "id": 0,
                    "tray": [
                        {
                            "id": 0,
                            "tray_type": "",  # Empty = slot is empty
                            "tray_sub_brands": "",
                            "tray_color": "",
                            "tag_uid": "0000000000000000",  # Zero UID
                            "remain": 0,
                        }
                    ],
                }
            ]
        }
        mqtt_client._handle_ams_data(empty_update)

        # Verify empty values were applied (not ignored by merge logic)
        ams_data = mqtt_client.state.raw_data.get("ams", [])
        tray = ams_data[0]["tray"][0]
        assert tray["tray_type"] == "", "tray_type should be cleared when slot is empty"
        assert tray["tray_color"] == "", "tray_color should be cleared when slot is empty"
        assert tray["tray_sub_brands"] == "", "tray_sub_brands should be cleared"
        assert tray["tag_uid"] == "0000000000000000", "tag_uid should be cleared"

    def test_partial_update_preserves_other_fields(self, mqtt_client):
        """Test that partial updates still preserve non-slot-status fields."""
        # Initial state with full data
        initial_ams = {
            "ams": [
                {
                    "id": 0,
                    "humidity": "3",
                    "temp": "25.5",
                    "tray": [
                        {
                            "id": 0,
                            "tray_type": "PLA",
                            "tray_color": "00FF00",
                            "remain": 90,
                            "k": 0.02,
                        }
                    ],
                }
            ]
        }
        mqtt_client._handle_ams_data(initial_ams)

        # Partial update - only remain changes
        partial_update = {
            "ams": [
                {
                    "id": 0,
                    "tray": [
                        {
                            "id": 0,
                            "remain": 85,  # Only this changed
                        }
                    ],
                }
            ]
        }
        mqtt_client._handle_ams_data(partial_update)

        # Verify remain was updated but other fields preserved
        ams_data = mqtt_client.state.raw_data.get("ams", [])
        tray = ams_data[0]["tray"][0]
        assert tray["remain"] == 85, "remain should be updated"
        assert tray["tray_type"] == "PLA", "tray_type should be preserved"
        assert tray["tray_color"] == "00FF00", "tray_color should be preserved"
        assert tray["k"] == 0.02, "k should be preserved"

    def test_tray_exist_bits_clears_empty_slots(self, mqtt_client):
        """Test that tray_exist_bits clears slots marked as empty (Issue #147).

        New AMS models (AMS 2 Pro) don't send empty tray data when a spool is removed.
        Instead, they update tray_exist_bits to indicate which slots have spools.
        """
        # Initial state: AMS 0 and AMS 1 with loaded spools
        initial_ams = {
            "ams": [
                {
                    "id": 0,
                    "tray": [
                        {"id": 0, "tray_type": "PLA", "tray_color": "FF0000", "remain": 80},
                        {"id": 1, "tray_type": "PETG", "tray_color": "00FF00", "remain": 60},
                        {"id": 2, "tray_type": "ABS", "tray_color": "0000FF", "remain": 40},
                        {"id": 3, "tray_type": "TPU", "tray_color": "FFFF00", "remain": 20},
                    ],
                },
                {
                    "id": 1,
                    "tray": [
                        {"id": 0, "tray_type": "PLA", "tray_color": "FFFFFF", "remain": 90},
                        {"id": 1, "tray_type": "PLA", "tray_color": "000000", "remain": 70},
                        {"id": 2, "tray_type": "PLA", "tray_color": "FF00FF", "remain": 50},
                        {"id": 3, "tray_type": "PLA", "tray_color": "00FFFF", "remain": 30},
                    ],
                },
            ],
            "tray_exist_bits": "ff",  # All 8 slots have spools (0xFF = 11111111)
        }
        mqtt_client._handle_ams_data(initial_ams)

        # Verify initial state
        ams_data = mqtt_client.state.raw_data.get("ams", [])
        assert ams_data[1]["tray"][3]["tray_type"] == "PLA"  # AMS 1 slot 3 (B4) has spool

        # Now simulate spool removal from AMS 1 slot 3 (B4)
        # tray_exist_bits: 0x7f = 01111111 (bit 7 = 0 means AMS 1 slot 3 is empty)
        update_ams = {
            "ams": [
                {"id": 0, "tray": [{"id": 0}, {"id": 1}, {"id": 2}, {"id": 3}]},
                {"id": 1, "tray": [{"id": 0}, {"id": 1}, {"id": 2}, {"id": 3}]},
            ],
            "tray_exist_bits": "7f",  # Bit 7 = 0 -> AMS 1 slot 3 is empty
        }
        mqtt_client._handle_ams_data(update_ams)

        # Verify AMS 1 slot 3 was cleared
        ams_data = mqtt_client.state.raw_data.get("ams", [])
        b4_tray = ams_data[1]["tray"][3]
        assert b4_tray["tray_type"] == "", "tray_type should be cleared for empty slot"
        assert b4_tray["remain"] == 0, "remain should be 0 for empty slot"

        # Verify other slots are preserved
        assert ams_data[0]["tray"][0]["tray_type"] == "PLA", "A1 should still have PLA"
        assert ams_data[1]["tray"][0]["tray_type"] == "PLA", "B1 should still have PLA"


class TestNozzleRackData:
    """Tests for nozzle rack data parsing from H2 series device.nozzle.info."""

    @pytest.fixture
    def mqtt_client(self):
        """Create a BambuMQTTClient instance for testing."""
        from backend.app.services.bambu_mqtt import BambuMQTTClient

        client = BambuMQTTClient(
            ip_address="192.168.1.100",
            serial_number="TEST123",
            access_code="12345678",
        )
        return client

    def test_h2c_nozzle_rack_populated_with_8_entries(self, mqtt_client):
        """H2C provides 8 nozzle entries: IDs 0,1 (L/R hotend) + 16-21 (rack)."""
        payload = {
            "print": {
                "device": {
                    "nozzle": {
                        "info": [
                            {
                                "id": 0,
                                "type": "HS",
                                "diameter": "0.4",
                                "wear": 5,
                                "stat": 1,
                                "max_temp": 300,
                                "serial_number": "SN-L",
                            },
                            {
                                "id": 1,
                                "type": "HS",
                                "diameter": "0.4",
                                "wear": 3,
                                "stat": 0,
                                "max_temp": 300,
                                "serial_number": "SN-R",
                            },
                            {
                                "id": 16,
                                "type": "HS",
                                "diameter": "0.4",
                                "wear": 10,
                                "stat": 0,
                                "max_temp": 300,
                                "serial_number": "SN-16",
                            },
                            {
                                "id": 17,
                                "type": "HH01",
                                "diameter": "0.6",
                                "wear": 0,
                                "stat": 0,
                                "max_temp": 300,
                                "serial_number": "SN-17",
                            },
                            {
                                "id": 18,
                                "type": "HS",
                                "diameter": "0.4",
                                "wear": 2,
                                "stat": 0,
                                "max_temp": 300,
                                "serial_number": "SN-18",
                            },
                            {
                                "id": 19,
                                "type": "",
                                "diameter": "",
                                "wear": None,
                                "stat": None,
                                "max_temp": 0,
                                "serial_number": "",
                            },
                            {
                                "id": 20,
                                "type": "",
                                "diameter": "",
                                "wear": None,
                                "stat": None,
                                "max_temp": 0,
                                "serial_number": "",
                            },
                            {
                                "id": 21,
                                "type": "",
                                "diameter": "",
                                "wear": None,
                                "stat": None,
                                "max_temp": 0,
                                "serial_number": "",
                            },
                        ]
                    }
                }
            }
        }
        mqtt_client._process_message(payload)

        assert len(mqtt_client.state.nozzle_rack) == 8
        ids = [n["id"] for n in mqtt_client.state.nozzle_rack]
        assert ids == [0, 1, 16, 17, 18, 19, 20, 21]

    def test_h2d_nozzle_rack_populated_with_2_entries(self, mqtt_client):
        """H2D provides 2 nozzle entries: IDs 0,1 (L/R hotend) — no rack slots."""
        payload = {
            "print": {
                "device": {
                    "nozzle": {
                        "info": [
                            {
                                "id": 0,
                                "type": "HS",
                                "diameter": "0.4",
                                "wear": 5,
                                "stat": 1,
                                "max_temp": 300,
                                "serial_number": "SN-L",
                            },
                            {
                                "id": 1,
                                "type": "HS",
                                "diameter": "0.4",
                                "wear": 3,
                                "stat": 1,
                                "max_temp": 300,
                                "serial_number": "SN-R",
                            },
                        ]
                    }
                }
            }
        }
        mqtt_client._process_message(payload)

        assert len(mqtt_client.state.nozzle_rack) == 2
        ids = [n["id"] for n in mqtt_client.state.nozzle_rack]
        assert ids == [0, 1]

    def test_single_nozzle_h2s_populated(self, mqtt_client):
        """H2S provides 1 nozzle entry: ID 0 only — single nozzle printer."""
        payload = {
            "print": {
                "device": {
                    "nozzle": {
                        "info": [
                            {
                                "id": 0,
                                "type": "HS",
                                "diameter": "0.4",
                                "wear": 2,
                                "stat": 1,
                                "max_temp": 300,
                                "serial_number": "SN-0",
                            },
                        ]
                    }
                }
            }
        }
        mqtt_client._process_message(payload)

        assert len(mqtt_client.state.nozzle_rack) == 1
        assert mqtt_client.state.nozzle_rack[0]["id"] == 0

    def test_empty_nozzle_info_does_not_populate_rack(self, mqtt_client):
        """Empty nozzle info list should not populate nozzle_rack."""
        payload = {"print": {"device": {"nozzle": {"info": []}}}}
        mqtt_client._process_message(payload)

        assert mqtt_client.state.nozzle_rack == []

    def test_nozzle_rack_sorted_by_id(self, mqtt_client):
        """Nozzle rack entries should be sorted by ID regardless of input order."""
        payload = {
            "print": {
                "device": {
                    "nozzle": {
                        "info": [
                            {"id": 17, "type": "HS", "diameter": "0.6"},
                            {"id": 0, "type": "HS", "diameter": "0.4"},
                            {"id": 16, "type": "HS", "diameter": "0.4"},
                            {"id": 1, "type": "HS", "diameter": "0.4"},
                        ]
                    }
                }
            }
        }
        mqtt_client._process_message(payload)

        ids = [n["id"] for n in mqtt_client.state.nozzle_rack]
        assert ids == [0, 1, 16, 17]

    def test_nozzle_rack_field_mapping(self, mqtt_client):
        """Verify field mapping from MQTT nozzle_info to nozzle_rack dict keys."""
        payload = {
            "print": {
                "device": {
                    "nozzle": {
                        "info": [
                            {
                                "id": 16,
                                "type": "HH01",
                                "diameter": "0.6",
                                "wear": 15,
                                "stat": 0,
                                "max_temp": 320,
                                "serial_number": "SN-ABC123",
                                "filament_colour": "FF8800",
                                "filament_id": "F42",
                                "tray_type": "ABS",
                            }
                        ]
                    }
                }
            }
        }
        mqtt_client._process_message(payload)

        slot = mqtt_client.state.nozzle_rack[0]
        assert slot["id"] == 16
        assert slot["type"] == "HH01"
        assert slot["diameter"] == "0.6"
        assert slot["wear"] == 15
        assert slot["stat"] == 0
        assert slot["max_temp"] == 320
        assert slot["serial_number"] == "SN-ABC123"
        assert slot["filament_color"] == "FF8800"
        assert slot["filament_id"] == "F42"
        assert slot["filament_type"] == "ABS"

    def test_nozzle_info_updates_nozzle_state(self, mqtt_client):
        """Nozzle info for IDs 0,1 should also update nozzle state (type/diameter)."""
        payload = {
            "print": {
                "device": {
                    "nozzle": {
                        "info": [
                            {"id": 0, "type": "HS", "diameter": "0.4"},
                            {"id": 1, "type": "HH01", "diameter": "0.6"},
                        ]
                    }
                }
            }
        }
        mqtt_client._process_message(payload)

        assert mqtt_client.state.nozzles[0].nozzle_type == "HS"
        assert mqtt_client.state.nozzles[0].nozzle_diameter == "0.4"
        assert mqtt_client.state.nozzles[1].nozzle_type == "HH01"
        assert mqtt_client.state.nozzles[1].nozzle_diameter == "0.6"


class TestRequestTopicFailSafe:
    """Tests for graceful degradation when broker rejects request topic subscription."""

    @pytest.fixture
    def mqtt_client(self):
        from backend.app.services.bambu_mqtt import BambuMQTTClient

        client = BambuMQTTClient(
            ip_address="192.168.1.100",
            serial_number="TEST123",
            access_code="12345678",
        )
        return client

    def test_request_topic_supported_by_default(self, mqtt_client):
        """Request topic subscription is attempted by default."""
        assert mqtt_client._request_topic_supported is True
        assert mqtt_client._request_topic_confirmed is False

    def test_on_subscribe_confirms_success(self, mqtt_client):
        """Successful SUBACK marks request topic as confirmed."""
        from paho.mqtt.reasoncodes import ReasonCode

        mqtt_client._request_topic_sub_mid = 42
        rc = ReasonCode(9, identifier=0)  # SUBACK packetType=9, QoS 0 = success
        mqtt_client._on_subscribe(None, None, 42, [rc], None)

        assert mqtt_client._request_topic_confirmed is True
        assert mqtt_client._request_topic_supported is True
        assert mqtt_client._request_topic_sub_mid is None
        assert mqtt_client._request_topic_sub_time == 0.0

    def test_on_subscribe_detects_rejection(self, mqtt_client):
        """SUBACK with failure code disables request topic."""
        from paho.mqtt.reasoncodes import ReasonCode

        mqtt_client._request_topic_sub_mid = 42
        rc = ReasonCode(9, identifier=0x80)  # SUBACK packetType=9, 0x80 = failure
        mqtt_client._on_subscribe(None, None, 42, [rc], None)

        assert mqtt_client._request_topic_supported is False
        assert mqtt_client._request_topic_confirmed is False

    def test_on_subscribe_ignores_other_mids(self, mqtt_client):
        """SUBACK for other subscriptions (e.g. report topic) is ignored."""
        from paho.mqtt.reasoncodes import ReasonCode

        mqtt_client._request_topic_sub_mid = 42
        rc = ReasonCode(9, identifier=0x80)
        mqtt_client._on_subscribe(None, None, 99, [rc], None)

        # Not affected — mid doesn't match
        assert mqtt_client._request_topic_supported is True

    def test_disconnect_after_subscription_disables_topic(self, mqtt_client):
        """Disconnect within 10s of subscription attempt disables request topic."""
        import time

        mqtt_client._request_topic_sub_time = time.time()
        mqtt_client._request_topic_confirmed = False
        mqtt_client._last_message_time = 0.0

        mqtt_client._on_disconnect(None, None)

        assert mqtt_client._request_topic_supported is False
        assert mqtt_client._request_topic_sub_time == 0.0

    def test_disconnect_after_confirmation_does_not_disable(self, mqtt_client):
        """Disconnect after SUBACK confirmation keeps request topic enabled."""
        import time

        mqtt_client._request_topic_sub_time = time.time()
        mqtt_client._request_topic_confirmed = True
        mqtt_client._last_message_time = 0.0

        mqtt_client._on_disconnect(None, None)

        assert mqtt_client._request_topic_supported is True

    def test_late_disconnect_does_not_disable(self, mqtt_client):
        """Disconnect long after subscription (>10s) doesn't blame request topic."""
        import time

        mqtt_client._request_topic_sub_time = time.time() - 30.0
        mqtt_client._request_topic_confirmed = False
        mqtt_client._last_message_time = 0.0

        mqtt_client._on_disconnect(None, None)

        assert mqtt_client._request_topic_supported is True

    def test_on_connect_skips_request_topic_when_unsupported(self, mqtt_client):
        """After marking unsupported, reconnect skips request topic subscription."""
        mqtt_client._request_topic_supported = False

        subscribe_calls = []
        mock_client = type(
            "MockClient",
            (),
            {
                "subscribe": lambda self, topic: subscribe_calls.append(topic) or (0, 1),
            },
        )()

        mqtt_client._on_connect(mock_client, None, None, 0)

        # Only report topic subscribed, not request topic
        assert len(subscribe_calls) == 1
        assert subscribe_calls[0] == mqtt_client.topic_subscribe


class TestRequestTopicAmsMapping:
    """Tests for capturing ams_mapping from the MQTT request topic."""

    @pytest.fixture
    def mqtt_client(self):
        """Create a BambuMQTTClient instance for testing."""
        from backend.app.services.bambu_mqtt import BambuMQTTClient

        client = BambuMQTTClient(
            ip_address="192.168.1.100",
            serial_number="TEST123",
            access_code="12345678",
        )
        return client

    def test_captured_ams_mapping_initializes_to_none(self, mqtt_client):
        """Verify _captured_ams_mapping starts as None."""
        assert mqtt_client._captured_ams_mapping is None

    def test_handle_request_message_captures_ams_mapping(self, mqtt_client):
        """project_file command with ams_mapping stores the mapping."""
        data = {
            "print": {
                "command": "project_file",
                "ams_mapping": [0, 4, -1, -1],
                "url": "ftp://192.168.1.100/test.3mf",
            }
        }
        mqtt_client._handle_request_message(data)
        assert mqtt_client._captured_ams_mapping == [0, 4, -1, -1]

    def test_handle_request_message_ignores_non_print_commands(self, mqtt_client):
        """Non-project_file commands don't store ams_mapping."""
        data = {
            "print": {
                "command": "pause",
            }
        }
        mqtt_client._handle_request_message(data)
        assert mqtt_client._captured_ams_mapping is None

    def test_handle_request_message_ignores_missing_ams_mapping(self, mqtt_client):
        """project_file command without ams_mapping doesn't store anything."""
        data = {
            "print": {
                "command": "project_file",
                "url": "ftp://192.168.1.100/test.3mf",
            }
        }
        mqtt_client._handle_request_message(data)
        assert mqtt_client._captured_ams_mapping is None

    def test_handle_request_message_ignores_non_dict_print(self, mqtt_client):
        """Non-dict print value is safely ignored."""
        data = {"print": "not_a_dict"}
        mqtt_client._handle_request_message(data)
        assert mqtt_client._captured_ams_mapping is None

    def test_handle_request_message_ignores_missing_print(self, mqtt_client):
        """Message without print key is safely ignored."""
        data = {"pushing": {"command": "pushall"}}
        mqtt_client._handle_request_message(data)
        assert mqtt_client._captured_ams_mapping is None

    def test_captured_mapping_overwrites_previous(self, mqtt_client):
        """A new print command overwrites a previously captured mapping."""
        mqtt_client._captured_ams_mapping = [0, -1, -1, -1]
        data = {
            "print": {
                "command": "project_file",
                "ams_mapping": [4, 8, -1, -1],
            }
        }
        mqtt_client._handle_request_message(data)
        assert mqtt_client._captured_ams_mapping == [4, 8, -1, -1]

    def test_print_start_callback_includes_ams_mapping(self, mqtt_client):
        """on_print_start callback data includes captured ams_mapping."""
        start_data = {}

        def on_start(data):
            start_data.update(data)

        mqtt_client.on_print_start = on_start
        mqtt_client._captured_ams_mapping = [0, 4, -1, -1]

        # Trigger print start
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "RUNNING",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                }
            }
        )

        assert start_data.get("ams_mapping") == [0, 4, -1, -1]

    def test_print_start_callback_ams_mapping_none_when_not_captured(self, mqtt_client):
        """on_print_start callback has ams_mapping=None when no mapping captured."""
        start_data = {}

        def on_start(data):
            start_data.update(data)

        mqtt_client.on_print_start = on_start

        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "RUNNING",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                }
            }
        )

        assert "ams_mapping" in start_data
        assert start_data["ams_mapping"] is None

    def test_print_complete_callback_includes_ams_mapping(self, mqtt_client):
        """on_print_complete callback data includes captured ams_mapping."""
        complete_data = {}

        def on_complete(data):
            complete_data.update(data)

        mqtt_client.on_print_start = lambda d: None
        mqtt_client.on_print_complete = on_complete
        mqtt_client._captured_ams_mapping = [0, 9, -1, -1]

        # Start print
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "RUNNING",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                }
            }
        )

        # Complete print
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "FINISH",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                }
            }
        )

        assert complete_data.get("ams_mapping") == [0, 9, -1, -1]

    def test_captured_mapping_cleared_after_print_complete(self, mqtt_client):
        """_captured_ams_mapping is reset to None after print completion."""
        mqtt_client.on_print_start = lambda d: None
        mqtt_client.on_print_complete = lambda d: None
        mqtt_client._captured_ams_mapping = [0, 4, -1, -1]

        # Start print
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "RUNNING",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                }
            }
        )

        # Complete print
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "FINISH",
                    "gcode_file": "/data/Metadata/test.gcode",
                    "subtask_name": "Test",
                }
            }
        )

        assert mqtt_client._captured_ams_mapping is None

    def test_full_flow_capture_and_deliver(self, mqtt_client):
        """Full flow: slicer sends print command → MQTT captures mapping → completion delivers it."""
        complete_data = {}

        def on_complete(data):
            complete_data.update(data)

        mqtt_client.on_print_start = lambda d: None
        mqtt_client.on_print_complete = on_complete

        # 1. Slicer sends print command (captured from request topic)
        mqtt_client._handle_request_message(
            {
                "print": {
                    "command": "project_file",
                    "ams_mapping": [4, 9, -1, -1],
                    "url": "ftp://192.168.1.100/model.3mf",
                }
            }
        )
        assert mqtt_client._captured_ams_mapping == [4, 9, -1, -1]

        # 2. Printer reports RUNNING
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "RUNNING",
                    "gcode_file": "/data/Metadata/model.gcode",
                    "subtask_name": "Model",
                }
            }
        )

        # 3. Printer reports FINISH
        mqtt_client._process_message(
            {
                "print": {
                    "gcode_state": "FINISH",
                    "gcode_file": "/data/Metadata/model.gcode",
                    "subtask_name": "Model",
                }
            }
        )

        assert complete_data["ams_mapping"] == [4, 9, -1, -1]
        assert complete_data["status"] == "completed"
        # Mapping cleared after completion
        assert mqtt_client._captured_ams_mapping is None