Domů Procházet Nápověda
Přihlásit se
yunoadmin
/
bambuddy
zrcadlo https://github.com/maziggy/bambuddy
1
0
Rozštěpit 0
Soubory Úkoly 0 Wiki
Strom: 1e011b0c6e
Větve Značky
bambuddy
/
logs
/
f42bcdfd75b54425b06137b33d27efc1.log

f42bcdfd75b54425b06137b33d27efc1.log 31 KB
Historie Surový

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    2. 

  2. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x1001 -> extruder 0
    3. 

  3. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'1': 0}
    4. 

  4. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    5. 

  5. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    6. 

  6. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    7. 

  7. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    8. 

  8. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    9. 

  9. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    10. 

  10. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    11. 

  11. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 50334208, 'code': 65540}]
    12. 

  12. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    13. 

  13. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -61dBm
    14. 

  14. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    15. 

  15. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    16. 

  16. 2026-04-14 12:12:51,798 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    17. 

  17. 2026-04-14 12:12:52,394 DEBUG [backend.app.api.routes.printers] API returning ams_mapping: [], ams_extruder_map: {'1': 0}
    18. 

  18. 2026-04-14 12:12:52,394 DEBUG [backend.app.api.routes.printers] Using tray_now directly as global ID: 255
    19. 

  19. 2026-04-14 12:12:52,396 DEBUG [backend.app.api.routes.printers] API returning ams_mapping: [], ams_extruder_map: {'0': 1, '1': 0, '128': 0, '2': 1}
    20. 

  20. 2026-04-14 12:12:52,396 DEBUG [backend.app.api.routes.printers] Using tray_now directly as global ID: 9
    21. 

  21. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    22. 

  22. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    23. 

  23. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    24. 

  24. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '2', 'ams_exist_bits_raw': '2', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 412}
    25. 

  25. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    26. 

  26. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    27. 

  27. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x1001 -> extruder 0
    28. 

  28. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'1': 0}
    29. 

  29. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    30. 

  30. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    31. 

  31. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    32. 

  32. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    33. 

  33. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    34. 

  34. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    35. 

  35. 2026-04-14 12:12:52,883 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    36. 

  36. 2026-04-14 12:12:52,884 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 50334208, 'code': 65540}]
    37. 

  37. 2026-04-14 12:12:52,884 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    38. 

  38. 2026-04-14 12:12:52,884 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -61dBm
    39. 

  39. 2026-04-14 12:12:52,884 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    40. 

  40. 2026-04-14 12:12:52,884 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    41. 

  41. 2026-04-14 12:12:52,884 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    42. 

  42. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 1797541, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    43. 

  43. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    44. 

  44. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 1797541 (binary: 0b110110110110110100101)
    45. 

  45. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    46. 

  46. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '17', 'ams_exist_bits_raw': '17', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '10fff', 'tray_hall_out_bits': '200', 'tray_is_bbl_bits': 'fff', 'tray_now': '1', 'tray_pre': '1', 'tray_read_done_bits': '10fff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 1277}
    47. 

  47. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 9
    48. 

  48. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 4 new units, 4 total
    49. 

  49. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002103 -> extruder 1
    50. 

  50. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10002003 -> extruder 0
    51. 

  51. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    52. 

  52. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 2 info=0x10001101 -> extruder 1
    53. 

  53. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 1, '1': 0, '128': 0, '2': 1}
    54. 

  54. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    55. 

  55. 2026-04-14 12:12:53,351 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    56. 

  56. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=274 (switch_state bits 12-14: 0)
    57. 

  57. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 24°C (heater OFF)
    58. 

  58. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    59. 

  59. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=24.0, heating=False, respect_local=False
    60. 

  60. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 24.0, target: 0.0, heating: False
    61. 

  61. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    62. 

  62. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    63. 

  63. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -45dBm
    64. 

  64. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    65. 

  65. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    66. 

  66. 2026-04-14 12:12:53,352 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    67. 

  67. 2026-04-14 12:12:54,047 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    68. 

  68. 2026-04-14 12:12:54,047 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    69. 

  69. 2026-04-14 12:12:54,047 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    70. 

  70. 2026-04-14 12:12:54,047 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '2', 'ams_exist_bits_raw': '2', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 412}
    71. 

  71. 2026-04-14 12:12:54,047 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    72. 

  72. 2026-04-14 12:12:54,047 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    73. 

  73. 2026-04-14 12:12:54,047 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x1001 -> extruder 0
    74. 

  74. 2026-04-14 12:12:54,047 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'1': 0}
    75. 

  75. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    76. 

  76. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    77. 

  77. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    78. 

  78. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    79. 

  79. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    80. 

  80. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    81. 

  81. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    82. 

  82. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 50334208, 'code': 65540}]
    83. 

  83. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    84. 

  84. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -61dBm
    85. 

  85. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    86. 

  86. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    87. 

  87. 2026-04-14 12:12:54,048 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    88. 

  88. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    89. 

  89. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    90. 

  90. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    91. 

  91. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '2', 'ams_exist_bits_raw': '2', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 412}
    92. 

  92. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    93. 

  93. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    94. 

  94. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x1001 -> extruder 0
    95. 

  95. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'1': 0}
    96. 

  96. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    97. 

  97. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    98. 

  98. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    99. 

  99. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    100. 

  100. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    101. 

  101. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    102. 

  102. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    103. 

  103. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 50334208, 'code': 65540}]
    104. 

  104. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    105. 

  105. 2026-04-14 12:12:55,159 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -61dBm
    106. 

  106. 2026-04-14 12:12:55,160 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    107. 

  107. 2026-04-14 12:12:55,160 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    108. 

  108. 2026-04-14 12:12:55,160 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    109. 

  109. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 1797541, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    110. 

  110. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    111. 

  111. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 1797541 (binary: 0b110110110110110100101)
    112. 

  112. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    113. 

  113. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '17', 'ams_exist_bits_raw': '17', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '10fff', 'tray_hall_out_bits': '200', 'tray_is_bbl_bits': 'fff', 'tray_now': '1', 'tray_pre': '1', 'tray_read_done_bits': '10fff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 1277}
    114. 

  114. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 9
    115. 

  115. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 4 new units, 4 total
    116. 

  116. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002103 -> extruder 1
    117. 

  117. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10002003 -> extruder 0
    118. 

  118. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    119. 

  119. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 2 info=0x10001101 -> extruder 1
    120. 

  120. 2026-04-14 12:12:55,247 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 1, '1': 0, '128': 0, '2': 1}
    121. 

  121. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    122. 

  122. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    123. 

  123. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=274 (switch_state bits 12-14: 0)
    124. 

  124. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 24°C (heater OFF)
    125. 

  125. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    126. 

  126. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=24.0, heating=False, respect_local=False
    127. 

  127. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 24.0, target: 0.0, heating: False
    128. 

  128. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    129. 

  129. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    130. 

  130. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -45dBm
    131. 

  131. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    132. 

  132. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    133. 

  133. 2026-04-14 12:12:55,248 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    134. 

  134. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    135. 

  135. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    136. 

  136. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    137. 

  137. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '2', 'ams_exist_bits_raw': '2', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 412}
    138. 

  138. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    139. 

  139. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    140. 

  140. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x1001 -> extruder 0
    141. 

  141. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'1': 0}
    142. 

  142. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    143. 

  143. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    144. 

  144. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    145. 

  145. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    146. 

  146. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    147. 

  147. 2026-04-14 12:12:56,249 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    148. 

  148. 2026-04-14 12:12:56,250 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    149. 

  149. 2026-04-14 12:12:56,250 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 50334208, 'code': 65540}]
    150. 

  150. 2026-04-14 12:12:56,250 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    151. 

  151. 2026-04-14 12:12:56,250 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -61dBm
    152. 

  152. 2026-04-14 12:12:56,250 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    153. 

  153. 2026-04-14 12:12:56,250 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    154. 

  154. 2026-04-14 12:12:56,250 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    155. 

  155. 2026-04-14 12:12:57,234 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 1797541, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    156. 

  156. 2026-04-14 12:12:57,234 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    157. 

  157. 2026-04-14 12:12:57,234 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 1797541 (binary: 0b110110110110110100101)
    158. 

  158. 2026-04-14 12:12:57,234 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    159. 

  159. 2026-04-14 12:12:57,234 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '17', 'ams_exist_bits_raw': '17', 'cali_id': 255, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '10fff', 'tray_hall_out_bits': '200', 'tray_is_bbl_bits': 'fff', 'tray_now': '1', 'tray_pre': '1', 'tray_read_done_bits': '10fff', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 1277}
    160. 

  160. 2026-04-14 12:12:57,234 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 9
    161. 

  161. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 4 new units, 4 total
    162. 

  162. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10002103 -> extruder 1
    163. 

  163. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x10002003 -> extruder 0
    164. 

  164. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    165. 

  165. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 2 info=0x10001101 -> extruder 1
    166. 

  166. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 1, '1': 0, '128': 0, '2': 1}
    167. 

  167. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    168. 

  168. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    169. 

  169. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=274 (switch_state bits 12-14: 0)
    170. 

  170. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 24°C (heater OFF)
    171. 

  171. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    172. 

  172. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=24.0, heating=False, respect_local=False
    173. 

  173. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 24.0, target: 0.0, heating: False
    174. 

  174. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    175. 

  175. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 5, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    176. 

  176. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -45dBm
    177. 

  177. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}, {'mode': 'on', 'node': 'chamber_light2'}]
    178. 

  178. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    179. 

  179. 2026-04-14 12:12:57,235 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    180. 

  180. 2026-04-14 12:12:57,376 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': False, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    181. 

  181. 2026-04-14 12:12:57,376 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    182. 

  182. 2026-04-14 12:12:57,376 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: IDLE, gcode_file: , subtask_name: 
    183. 

  183. 2026-04-14 12:12:57,376 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '2', 'ams_exist_bits_raw': '2', 'cali_id': 0, 'cali_stat': 0, 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'f0', 'tray_is_bbl_bits': 'f0', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f0', 'tray_reading_bits': '0', 'tray_tar': '255', 'unbind_ams_stat': 0, 'version': 412}
    184. 

  184. 2026-04-14 12:12:57,376 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    185. 

  185. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    186. 

  186. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 1 info=0x1001 -> extruder 0
    187. 

  187. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'1': 0}
    188. 

  188. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    189. 

  189. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    190. 

  190. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    191. 

  191. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 30°C (heater OFF)
    192. 

  192. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    193. 

  193. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=30.0, heating=False, respect_local=False
    194. 

  194. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 30.0, target: 0.0, heating: False
    195. 

  195. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 50334208, 'code': 65540}]
    196. 

  196. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'ipcam_dev': '1', 'ipcam_record': 'enable', 'laser_preview_res': 7, 'mode_bits': 2, 'resolution': '720p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    197. 

  197. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -61dBm
    198. 

  198. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'off', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    199. 

  199. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: []
    200. 

  200. 2026-04-14 12:12:57,377 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: IDLE -> IDLE, file: , subtask: 
    201.