Главная Обзор Помощь
Вход
yunoadmin
/
bambuddy
зеркало из https://github.com/maziggy/bambuddy
1
0
Ответвить 0
Файлы Задачи 0 Вики
Дерево: 1e011b0c6e
Ветки Метки
bambuddy
/
logs
/
ea75aeeeeb184bda8a29aafbd6bfbb90.log

ea75aeeeeb184bda8a29aafbd6bfbb90.log 28 KB
История Исходник

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-05-11 22:08:44,770 INFO [backend.app.services.bambu_mqtt] [-] [[SERIAL]] PRINT START detected - file: Test Cube Loop.gcode.3mf, subtask: Test Cube Loop, is_new: True, is_file_change: False
    2. 

  2. 2026-05-11 22:08:44,771 INFO [backend.app.main] [-] [CALLBACK] on_print_start called for printer 1, data keys: ['filename', 'subtask_name', 'remaining_time', 'raw_data', 'ams_mapping']
    3. 

  3. 2026-05-11 22:08:44,777 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] PRINT START printer 1: mapping=None, tray_now=254, last_loaded_tray=254
    4. 

  4. 2026-05-11 22:08:44,811 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] Snapshotted 1 spool assignments for printer 1: {'255-0': 1}
    5. 

  5. 2026-05-11 22:08:44,811 INFO [backend.app.services.usage_tracker] [-] [UsageTracker] Captured start remain% for printer 1 (1 trays): {'255-0': 0}
    6. 

  6. 2026-05-11 22:08:44,820 INFO [backend.app.main] [-] [PLATE CHECK] printer_id=1, plate_detection_enabled=False
    7. 

  7. 2026-05-11 22:08:44,820 INFO [backend.app.main] [-] [CALLBACK] Print start detected - filename: Test Cube Loop.gcode.3mf, subtask: Test Cube Loop
    8. 

  8. 2026-05-11 22:08:44,838 INFO [backend.app.main] [-] Trying filenames: ['Test Cube Loop.gcode.3mf', 'Test Cube Loop.3mf', 'Test_Cube_Loop.gcode.3mf', 'Test_Cube_Loop.3mf']
    9. 

  9. 2026-05-11 22:08:45,658 INFO [backend.app.services.bambu_ftp] [-] FTP connected successfully to [IP] (model=P1S, prot_c=False)
    10. 

  10. 2026-05-11 22:08:46,475 INFO [backend.app.services.bambu_ftp] [-] Successfully downloaded /Test Cube Loop.gcode.3mf to /app/data/archive/temp/Test Cube Loop.gcode.3mf (43953 bytes)
    11. 

  11. 2026-05-11 22:08:46,475 INFO [backend.app.services.bambu_ftp] [-] FTP mode cached for [IP]: prot_p
    12. 

  12. 2026-05-11 22:08:46,485 INFO [backend.app.main] [-] Downloaded: /Test Cube Loop.gcode.3mf
    13. 

  13. 2026-05-11 22:08:46,529 INFO [backend.app.main] [-] Created archive 16 for Test Cube Loop.gcode.3mf
    14. 

  14. 2026-05-11 22:08:46,531 INFO [backend.app.main] [-] [ENERGY] No smart plug for printer 1 (archive 16)
    15. 

  15. 2026-05-11 22:08:46,535 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 1
    16. 

  16. 2026-05-11 22:08:46,535 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using chamber image protocol (model: P1S)
    17. 

  17. 2026-05-11 22:08:48,565 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 90827 bytes
    18. 

  18. 2026-05-11 22:08:48,565 INFO [backend.app.services.notification_service] [-] on_print_start called for printer 1 ([PRINTER])
    19. 

  19. 2026-05-11 22:08:48,567 INFO [backend.app.services.notification_service] [-] No notification providers configured for print_start event on printer 1
    20. 

  20. 2026-05-11 22:08:48,568 INFO [backend.app.main] [-] Loaded 1 printable objects for printer 1
    21. 

  21. 2026-05-11 22:08:49,241 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    22. 

  22. 2026-05-11 22:08:49,420 INFO [backend.app.services.bambu_ftp] [-] FTP connected successfully to [IP] (model=P1S, prot_c=False)
    23. 

  23. 2026-05-11 22:08:54,271 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    24. 

  24. 2026-05-11 22:08:54,370 INFO [backend.app.main] [-] [TIMELAPSE] Baseline at print start: 265 video files for printer 1
    25. 

  25. 2026-05-11 22:08:59,495 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    26. 

  26. 2026-05-11 22:09:05,025 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    27. 

  27. 2026-05-11 22:09:10,046 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    28. 

  28. 2026-05-11 22:09:15,075 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    29. 

  29. 2026-05-11 22:09:20,305 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    30. 

  30. 2026-05-11 22:09:25,739 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    31. 

  31. 2026-05-11 22:09:30,777 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    32. 

  32. 2026-05-11 22:09:34,578 INFO [backend.app.api.routes.printers] [a0874f6c] Cover using cached 3MF from /app/data/archive/temp/Test Cube Loop.gcode.3mf (avoided duplicate FTP)
    33. 

  33. 2026-05-11 22:09:34,579 INFO [backend.app.api.routes.printers] [a0874f6c] Downloaded file size: 43953 bytes
    34. 

  34. 2026-05-11 22:09:34,580 INFO [backend.app.api.routes.printers] [a0874f6c] Cover: detected plate 1 from 3MF contents
    35. 

  35. 2026-05-11 22:09:34,939 INFO [backend.app.services.firmware_check] [4228d0e6] Got Bambu Lab build ID: qlInJoEY-IkhFrtF0HKX1
    36. 

  36. 2026-05-11 22:09:35,910 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    37. 

  37. 2026-05-11 22:09:41,350 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    38. 

  38. 2026-05-11 22:09:46,484 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    39. 

  39. 2026-05-11 22:09:51,818 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    40. 

  40. 2026-05-11 22:09:53,479 INFO [backend.app.api.routes.inventory] [6529e2f7] Pre-configured assignment: spool 1 → printer 1 AMS255-T0 (slot empty, will configure on insert)
    41. 

  41. 2026-05-11 22:09:53,480 INFO [uvicorn.access] [-] [IP]:44440 - "POST /api/v1/inventory/assignments HTTP/1.1" 200
    42. 

  42. 2026-05-11 22:09:56,957 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    43. 

  43. 2026-05-11 22:09:57,407 INFO [backend.app.services.bambu_mqtt] [eccda0cb] [[SERIAL]] Requesting K-profiles for nozzle_diameter=0.4 (attempt 1/3)
    44. 

  44. 2026-05-11 22:09:57,422 INFO [backend.app.services.bambu_mqtt] [-] [[SERIAL]] K-profile response: nozzle=0.4, seq_id=6, 0 profiles, expected=0.4
    45. 

  45. 2026-05-11 22:09:57,422 INFO [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Got 0 K-profiles for nozzle=0.4
    46. 

  46. 2026-05-11 22:09:57,423 INFO [backend.app.services.bambu_mqtt] [eccda0cb] [[SERIAL]] Got 0 K-profiles for nozzle=0.4 on attempt 1
    47. 

  47. 2026-05-11 22:10:01,997 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    48. 

  48. 2026-05-11 22:10:07,131 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    49. 

  49. 2026-05-11 22:10:12,066 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    50. 

  50. 2026-05-11 22:10:12,481 INFO [backend.app.api.routes.printers] [7ee317b7] [configure_ams_slot] printer_id=1, ams_id=255, tray_id=0
    51. 

  51. 2026-05-11 22:10:12,482 INFO [backend.app.api.routes.printers] [7ee317b7] [configure_ams_slot] tray_info_idx='GFA00', tray_type='PLA', tray_sub_brands='Bambu PLA Basic'
    52. 

  52. 2026-05-11 22:10:12,482 INFO [backend.app.api.routes.printers] [7ee317b7] [configure_ams_slot] setting_id='', kprofile_filament_id='', kprofile_setting_id=''
    53. 

  53. 2026-05-11 22:10:12,483 INFO [backend.app.services.bambu_mqtt] [7ee317b7] [[SERIAL]] Publishing ams_filament_setting: AMS 255, tray 0, tray_info_idx=GFA00, setting_id=
    54. 

  54. 2026-05-11 22:10:12,483 INFO [backend.app.services.bambu_mqtt] [7ee317b7] [[SERIAL]] Publishing extrusion_cali_sel: AMS 255, tray 0, cali_idx=-1
    55. 

  55. 2026-05-11 22:10:12,484 INFO [backend.app.api.routes.printers] [7ee317b7] [configure_ams_slot] Requesting status update from printer
    56. 

  56. 2026-05-11 22:10:12,485 INFO [backend.app.api.routes.printers] [7ee317b7] [configure_ams_slot] Status update request result: True
    57. 

  57. 2026-05-11 22:10:12,486 INFO [uvicorn.access] [-] [IP]:54818 - "POST /api/v1/printers/1/slots/255/0/configure?tray_info_idx=GFA00&tray_type=PLA&tray_sub_brands=Bambu+PLA+Basic&tray_color=000000FF&nozzle_temp_min=190&nozzle_temp_max=230&cali_idx=-1&nozzle_diameter=0.4 HTTP/1.1" 200
    58. 

  58. 2026-05-11 22:10:12,504 INFO [uvicorn.access] [-] [IP]:54818 - "PUT /api/v1/printers/1/slot-presets/255/0?preset_id=builtin_GFA00&preset_name=Bambu%20PLA%20Basic&preset_source=builtin HTTP/1.1" 200
    59. 

  59. 2026-05-11 22:10:17,199 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    60. 

  60. 2026-05-11 22:10:22,336 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    61. 

  61. 2026-05-11 22:10:24,779 INFO [backend.app.api.routes.inventory] [56489f25] Pre-configured assignment: spool 1 → printer 1 AMS255-T0 (slot empty, will configure on insert)
    62. 

  62. 2026-05-11 22:10:24,780 INFO [uvicorn.access] [-] [IP]:36444 - "POST /api/v1/inventory/assignments HTTP/1.1" 200
    63. 

  63. 2026-05-11 22:10:27,776 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    64. 

  64. 2026-05-11 22:10:32,806 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    65. 

  65. 2026-05-11 22:10:37,845 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    66. 

  66. 2026-05-11 22:10:42,874 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    67. 

  67. 2026-05-11 22:10:48,007 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    68. 

  68. 2026-05-11 22:10:53,346 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    69. 

  69. 2026-05-11 22:10:58,577 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    70. 

  70. 2026-05-11 22:11:03,612 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    71. 

  71. 2026-05-11 22:11:08,644 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    72. 

  72. 2026-05-11 22:11:13,676 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    73. 

  73. 2026-05-11 22:11:18,711 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    74. 

  74. 2026-05-11 22:11:23,839 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    75. 

  75. 2026-05-11 22:11:26,149 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 1
    76. 

  76. 2026-05-11 22:11:26,149 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using chamber image protocol (model: P1S)
    77. 

  77. 2026-05-11 22:11:27,882 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 93872 bytes
    78. 

  78. 2026-05-11 22:11:29,282 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    79. 

  79. 2026-05-11 22:11:34,321 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    80. 

  80. 2026-05-11 22:11:39,349 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    81. 

  81. 2026-05-11 22:11:44,387 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    82. 

  82. 2026-05-11 22:11:49,817 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    83. 

  83. 2026-05-11 22:11:54,852 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    84. 

  84. 2026-05-11 22:11:56,323 INFO [backend.app.api.routes.support] [7f67ac65] Log level changed to DEBUG
    85. 

  85. 2026-05-11 22:11:56,324 INFO [backend.app.api.routes.bug_report] [7f67ac65] Bug report: enabled debug logging
    86. 

  86. 2026-05-11 22:11:56,324 DEBUG [backend.app.services.bambu_mqtt] [7f67ac65] [[SERIAL]] Requesting status update (pushall)
    87. 

  87. 2026-05-11 22:11:56,325 INFO [uvicorn.access] [-] [IP]:48280 - "POST /api/v1/bug-report/start-logging HTTP/1.1" 200
    88. 

  88. 2026-05-11 22:11:56,359 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: Test Cube Loop.gcode.3mf, subtask_name: Test Cube Loop
    89. 

  89. 2026-05-11 22:11:56,360 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '0', 'tray_exist_bits': '0', 'tray_is_bbl_bits': '0', 'tray_tar': '255', 'tray_now': '254', 'tray_pre': '254', 'tray_read_done_bits': '0', 'tray_reading_bits': '0', 'version': 1, 'insert_flag': True, 'power_on_flag': False}
    90. 

  90. 2026-05-11 22:11:56,361 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 254
    91. 

  91. 2026-05-11 22:11:56,362 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 0 new units, 0 total
    92. 

  92. 2026-05-11 22:11:56,363 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 1280 (main=5, sub=0)
    93. 

  93. 2026-05-11 22:11:56,364 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    94. 

  94. 2026-05-11 22:11:56,364 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] mc_print_sub_stage changed: 0 -> 2
    95. 

  95. 2026-05-11 22:11:56,365 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 5.0
    96. 

  96. 2026-05-11 22:11:56,366 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 5.0°C (heater OFF)
    97. 

  97. 2026-05-11 22:11:56,367 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=5.0, heating=False, respect_local=False
    98. 

  98. 2026-05-11 22:11:56,368 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 5.0, target: 0.0, heating: False
    99. 

  99. 2026-05-11 22:11:56,369 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    100. 

  100. 2026-05-11 22:11:56,369 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'ipcam_dev': '1', 'ipcam_record': 'enable', 'timelapse': 'enable', 'resolution': '', 'tutk_server': 'disable', 'mode_bits': 3}
    101. 

  101. 2026-05-11 22:11:56,370 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    102. 

  102. 2026-05-11 22:11:56,371 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    103. 

  103. 2026-05-11 22:11:56,371 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'node': 'chamber_light', 'mode': 'on'}]
    104. 

  104. 2026-05-11 22:11:56,372 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: Test Cube Loop.gcode.3mf, subtask: Test Cube Loop
    105. 

  105. 2026-05-11 22:11:58,375 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    106. 

  106. 2026-05-11 22:11:58,376 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -46dBm
    107. 

  107. 2026-05-11 22:12:00,090 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    108. 

  108. 2026-05-11 22:12:00,091 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    109. 

  109. 2026-05-11 22:12:01,895 INFO [backend.app.services.bambu_mqtt] [f53245c1] [[SERIAL]] Requesting K-profiles for nozzle_diameter=0.4 (attempt 1/3)
    110. 

  110. 2026-05-11 22:12:01,895 DEBUG [backend.app.services.bambu_mqtt] [f53245c1] [[SERIAL]] K-profile request JSON: {"print": {"command": "extrusion_cali_get", "filament_id": "", "nozzle_diameter": "0.4", "sequence_id": "7"}}
    111. 

  111. 2026-05-11 22:12:01,905 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: extrusion_cali_get
    112. 

  112. 2026-05-11 22:12:01,905 INFO [backend.app.services.bambu_mqtt] [-] [[SERIAL]] K-profile response: nozzle=0.4, seq_id=7, 0 profiles, expected=0.4
    113. 

  113. 2026-05-11 22:12:01,905 INFO [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Got 0 K-profiles for nozzle=0.4
    114. 

  114. 2026-05-11 22:12:01,906 INFO [backend.app.services.bambu_mqtt] [f53245c1] [[SERIAL]] Got 0 K-profiles for nozzle=0.4 on attempt 1
    115. 

  115. 2026-05-11 22:12:02,407 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    116. 

  116. 2026-05-11 22:12:04,433 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    117. 

  117. 2026-05-11 22:12:04,434 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -47dBm
    118. 

  118. 2026-05-11 22:12:05,018 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    119. 

  119. 2026-05-11 22:12:05,019 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    120. 

  120. 2026-05-11 22:12:06,449 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    121. 

  121. 2026-05-11 22:12:06,450 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] stg_cur changed: 54 -> 14 (Cleaning nozzle tip)
    122. 

  122. 2026-05-11 22:12:06,451 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -45dBm
    123. 

  123. 2026-05-11 22:12:10,156 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    124. 

  124. 2026-05-11 22:12:10,157 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    125. 

  125. 2026-05-11 22:12:10,475 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    126. 

  126. 2026-05-11 22:12:10,476 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] mc_print_sub_stage changed: 2 -> 1
    127. 

  127. 2026-05-11 22:12:10,476 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -42dBm
    128. 

  128. 2026-05-11 22:12:12,504 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    129. 

  129. 2026-05-11 22:12:12,505 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -43dBm
    130. 

  130. 2026-05-11 22:12:14,529 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    131. 

  131. 2026-05-11 22:12:15,189 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    132. 

  132. 2026-05-11 22:12:15,189 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    133. 

  133. 2026-05-11 22:12:16,099 INFO [backend.app.api.routes.printers] [e4e5a281] [configure_ams_slot] printer_id=1, ams_id=255, tray_id=0
    134. 

  134. 2026-05-11 22:12:16,099 INFO [backend.app.api.routes.printers] [e4e5a281] [configure_ams_slot] tray_info_idx='GFL99', tray_type='PLA', tray_sub_brands='Generic PLA'
    135. 

  135. 2026-05-11 22:12:16,099 INFO [backend.app.api.routes.printers] [e4e5a281] [configure_ams_slot] setting_id='', kprofile_filament_id='', kprofile_setting_id=''
    136. 

  136. 2026-05-11 22:12:16,099 INFO [backend.app.services.bambu_mqtt] [e4e5a281] [[SERIAL]] Publishing ams_filament_setting: AMS 255, tray 0, tray_info_idx=GFL99, setting_id=
    137. 

  137. 2026-05-11 22:12:16,099 DEBUG [backend.app.services.bambu_mqtt] [e4e5a281] [[SERIAL]] ams_filament_setting command: {"print": {"command": "ams_filament_setting", "ams_id": 255, "tray_id": 0, "slot_id": 0, "tray_info_idx": "GFL99", "tray_type": "PLA", "tray_sub_brands": "Generic PLA", "tray_color": "000000FF", "nozzle_temp_min": 190, "nozzle_temp_max": 230, "sequence_id": "0"}}
    138. 

  138. 2026-05-11 22:12:16,100 INFO [backend.app.services.bambu_mqtt] [e4e5a281] [[SERIAL]] Publishing extrusion_cali_sel: AMS 255, tray 0, cali_idx=-1
    139. 

  139. 2026-05-11 22:12:16,100 DEBUG [backend.app.services.bambu_mqtt] [e4e5a281] [[SERIAL]] extrusion_cali_sel command: {"print": {"command": "extrusion_cali_sel", "cali_idx": -1, "filament_id": "GFL99", "nozzle_diameter": "0.4", "ams_id": 254, "tray_id": 254, "slot_id": 0, "sequence_id": "0"}}
    140. 

  140. 2026-05-11 22:12:16,100 INFO [backend.app.api.routes.printers] [e4e5a281] [configure_ams_slot] Requesting status update from printer
    141. 

  141. 2026-05-11 22:12:16,100 DEBUG [backend.app.services.bambu_mqtt] [e4e5a281] [[SERIAL]] Requesting status update (pushall)
    142. 

  142. 2026-05-11 22:12:16,100 INFO [backend.app.api.routes.printers] [e4e5a281] [configure_ams_slot] Status update request result: True
    143. 

  143. 2026-05-11 22:12:16,101 INFO [uvicorn.access] [-] [IP]:52548 - "POST /api/v1/printers/1/slots/255/0/configure?tray_info_idx=GFL99&tray_type=PLA&tray_sub_brands=Generic+PLA&tray_color=000000FF&nozzle_temp_min=190&nozzle_temp_max=230&cali_idx=-1&nozzle_diameter=0.4 HTTP/1.1" 200
    144. 

  144. 2026-05-11 22:12:16,111 INFO [uvicorn.access] [-] [IP]:52548 - "PUT /api/v1/printers/1/slot-presets/255/0?preset_id=builtin_GFL99&preset_name=Generic%20PLA&preset_source=builtin HTTP/1.1" 200
    145. 

  145. 2026-05-11 22:12:16,123 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: ams_filament_setting
    146. 

  146. 2026-05-11 22:12:16,124 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_filament_setting response: {'command': 'ams_filament_setting', 'ams_id': 255, 'tray_id': 0, 'slot_id': 0, 'tray_info_idx': 'GFL99', 'tray_type': 'PLA', 'tray_sub_brands': 'Generic PLA', 'tray_color': '000000FF', 'nozzle_temp_min': 190, 'nozzle_temp_max': 230, 'sequence_id': '0', 'reason': 'error string', 'result': 'fail'}
    147. 

  147. 2026-05-11 22:12:16,124 DEBUG [backend.app.api.routes.printers] [540b488e] API returning ams_mapping: [], ams_extruder_map: {}
    148. 

  148. 2026-05-11 22:12:16,124 DEBUG [backend.app.api.routes.printers] [540b488e] Using tray_now directly as global ID: 254
    149. 

  149. 2026-05-11 22:12:16,198 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: extrusion_cali_sel
    150. 

  150. 2026-05-11 22:12:16,198 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] extrusion_cali_sel response: {'command': 'extrusion_cali_sel', 'cali_idx': -1, 'filament_id': 'GFL99', 'nozzle_diameter': '0.4', 'ams_id': 254, 'tray_id': 254, 'slot_id': 0, 'sequence_id': '0', 'reason': 'success', 'result': 'success'}
    151. 

  151. 2026-05-11 22:12:16,224 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: Test Cube Loop.gcode.3mf, subtask_name: Test Cube Loop
    152. 

  152. 2026-05-11 22:12:16,225 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '0', 'tray_exist_bits': '0', 'tray_is_bbl_bits': '0', 'tray_tar': '255', 'tray_now': '254', 'tray_pre': '254', 'tray_read_done_bits': '0', 'tray_reading_bits': '0', 'version': 1, 'insert_flag': True, 'power_on_flag': False}
    153. 

  153. 2026-05-11 22:12:16,225 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] tray_now updated: 254
    154. 

  154. 2026-05-11 22:12:16,225 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Merged AMS data: 0 new units, 0 total
    155. 

  155. 2026-05-11 22:12:16,225 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ams_status: 1280 (main=5, sub=0)
    156. 

  156. 2026-05-11 22:12:16,225 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    157. 

  157. 2026-05-11 22:12:16,226 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 5.0
    158. 

  158. 2026-05-11 22:12:16,226 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 5.0°C (heater OFF)
    159. 

  159. 2026-05-11 22:12:16,226 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber heating calculated: target=0.0, current=5.0, heating=False, respect_local=False
    160. 

  160. 2026-05-11 22:12:16,226 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Chamber temp updated to: 5.0, target: 0.0, heating: False
    161. 

  161. 2026-05-11 22:12:16,226 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
    162. 

  162. 2026-05-11 22:12:16,226 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] ipcam field: {'ipcam_dev': '1', 'ipcam_record': 'enable', 'timelapse': 'enable', 'resolution': '', 'tutk_server': 'disable', 'mode_bits': 3}
    163. 

  163. 2026-05-11 22:12:16,227 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Timelapse detected during print (from ipcam)
    164. 

  164. 2026-05-11 22:12:16,227 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -43dBm
    165. 

  165. 2026-05-11 22:12:16,227 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'node': 'chamber_light', 'mode': 'on'}]
    166. 

  166. 2026-05-11 22:12:16,227 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: Test Cube Loop.gcode.3mf, subtask: Test Cube Loop
    167. 

  167. 2026-05-11 22:12:18,248 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    168. 

  168. 2026-05-11 22:12:18,911 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP NOTIFY for Bambuddy (Location=[IP], USN=[SERIAL], bind=[IP])
    169. 

  169. 2026-05-11 22:12:20,269 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    170. 

  170. 2026-05-11 22:12:20,423 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    171. 

  171. 2026-05-11 22:12:20,425 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    172. 

  172. 2026-05-11 22:12:24,292 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    173. 

  173. 2026-05-11 22:12:24,292 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -42dBm
    174. 

  174. 2026-05-11 22:12:24,306 DEBUG [backend.app.main] [-] [[PRINTER]] Runtime tracking: added 30s, total=9630s (2.67h)
    175. 

  175. 2026-05-11 22:12:24,316 DEBUG [backend.app.main] [-] Updated runtime for 1 printer(s)
    176. 

  176. 2026-05-11 22:12:25,458 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    177. 

  177. 2026-05-11 22:12:25,459 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    178. 

  178. 2026-05-11 22:12:26,313 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    179. 

  179. 2026-05-11 22:12:28,346 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    180. 

  180. 2026-05-11 22:12:28,346 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -43dBm
    181. 

  181. 2026-05-11 22:12:30,883 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    182. 

  182. 2026-05-11 22:12:30,884 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    183. 

  183. 2026-05-11 22:12:32,377 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    184. 

  184. 2026-05-11 22:12:32,378 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] mc_print_sub_stage changed: 1 -> 0
    185. 

  185. 2026-05-11 22:12:32,379 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -41dBm
    186. 

  186. 2026-05-11 22:12:34,394 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    187. 

  187. 2026-05-11 22:12:34,395 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] wifi_signal received: -42dBm
    188. 

  188. 2026-05-11 22:12:34,405 INFO [backend.app.main] [-] [SNAPSHOT] Capturing fresh frame for printer 1
    189. 

  189. 2026-05-11 22:12:34,405 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using chamber image protocol (model: P1S)
    190. 

  190. 2026-05-11 22:12:35,910 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    191. 

  191. 2026-05-11 22:12:35,911 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    192. 

  192. 2026-05-11 22:12:36,296 DEBUG [backend.app.services.camera] [-] Chamber image: received 83832 bytes
    193. 

  193. 2026-05-11 22:12:36,303 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 83832 bytes
    194. 

  194. 2026-05-11 22:12:36,437 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    195. 

  195. 2026-05-11 22:12:38,024 INFO [backend.app.api.routes.inventory] [8712b080] Pre-configured assignment: spool 1 → printer 1 AMS255-T0 (slot empty, will configure on insert)
    196. 

  196. 2026-05-11 22:12:38,025 INFO [uvicorn.access] [-] [IP]:37536 - "POST /api/v1/inventory/assignments HTTP/1.1" 200
    197. 

  197. 2026-05-11 22:12:40,454 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    198. 

  198. 2026-05-11 22:12:41,042 DEBUG [backend.app.services.virtual_printer.ssdp_server] [-] Received M-SEARCH from [IP]
    199. 

  199. 2026-05-11 22:12:41,043 INFO [backend.app.services.virtual_printer.ssdp_server] [-] Sent SSDP response to [IP] for 'Bambuddy' (Location=[IP], USN=[SERIAL])
    200. 

  200. 2026-05-11 22:12:42,477 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
    201.