Почетна Преглед Помоћ
Пријавите се
yunoadmin
/
bambuddy
огледало од https://github.com/maziggy/bambuddy
1
0
Креирај огранак 0
Датотеке Дискусије 0 Вики
Дрво: 1e011b0c6e
Гране Ознаке
bambuddy
/
logs
/
31366004cb9548b2b91f6b5cdb09040d.log

31366004cb9548b2b91f6b5cdb09040d.log 35 KB
Историја Датотека

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-04-22 16:41:41,590 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    2. 

  2. 2026-04-22 16:41:41,590 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    3. 

  3. 2026-04-22 16:41:41,590 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    4. 

  4. 2026-04-22 16:41:41,590 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    5. 

  5. 2026-04-22 16:41:41,590 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    6. 

  6. 2026-04-22 16:41:41,590 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    7. 

  7. 2026-04-22 16:41:41,590 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    8. 

  8. 2026-04-22 16:41:41,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    9. 

  9. 2026-04-22 16:41:41,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    10. 

  10. 2026-04-22 16:41:41,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    11. 

  11. 2026-04-22 16:41:41,591 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    12. 

  12. 2026-04-22 16:41:42,515 INFO [backend.app.services.camera] Successfully captured camera frame bytes: 196526 bytes
    13. 

  13. 2026-04-22 16:41:42,525 WARNING [backend.app.services.obico_detection] ML API call failed for printer 1: Client error '404 Not Found' for url 'http://[IP]:5334/p/?img=https%3A%2F%2Fbambuddy.homeserver-[USER].de%2Fapi%2Fv1%2Fobico%2Fcached-frame%2FTtTb85AzJP1N9nxN9DQdG5eW6xWX8r9wc7F3JMFcFeg'
    14. 

  14. For more information check: https://developer.mozilla.org/en-US/docs/Web/HTTP/Status/404
    15. 

  15. 2026-04-22 16:41:42,749 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8089287, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    16. 

  16. 2026-04-22 16:41:42,749 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    17. 

  17. 2026-04-22 16:41:42,749 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089287 (binary: 0b11110110110111011000111)
    18. 

  18. 2026-04-22 16:41:42,749 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Standard_Extra_Tall_Drawer_Komplett_plate_5
    19. 

  19. 2026-04-22 16:41:42,749 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '11', 'ams_exist_bits_raw': '11', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '1000d', 'tray_hall_out_bits': '1', 'tray_is_bbl_bits': '1000d', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '1000d', 'tray_reading_bits': '0', 'tray_tar': '0', 'unbind_ams_stat': 0, 'version': 113}
    20. 

  20. 2026-04-22 16:41:42,750 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 0
    21. 

  21. 2026-04-22 16:41:42,750 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    22. 

  22. 2026-04-22 16:41:42,750 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    23. 

  23. 2026-04-22 16:41:42,750 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    24. 

  24. 2026-04-22 16:41:42,750 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '128': 0}
    25. 

  25. 2026-04-22 16:41:42,750 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    26. 

  26. 2026-04-22 16:41:42,750 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    27. 

  27. 2026-04-22 16:41:42,751 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    28. 

  28. 2026-04-22 16:41:42,751 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    29. 

  29. 2026-04-22 16:41:42,751 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    30. 

  30. 2026-04-22 16:41:42,751 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    31. 

  31. 2026-04-22 16:41:42,751 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    32. 

  32. 2026-04-22 16:41:42,751 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    33. 

  33. 2026-04-22 16:41:42,751 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    34. 

  34. 2026-04-22 16:41:42,751 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    35. 

  35. 2026-04-22 16:41:42,752 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    36. 

  36. 2026-04-22 16:41:42,752 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    37. 

  37. 2026-04-22 16:41:42,752 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    38. 

  38. 2026-04-22 16:41:43,923 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8089287, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    39. 

  39. 2026-04-22 16:41:43,924 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    40. 

  40. 2026-04-22 16:41:43,924 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089287 (binary: 0b11110110110111011000111)
    41. 

  41. 2026-04-22 16:41:43,924 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Standard_Extra_Tall_Drawer_Komplett_plate_5
    42. 

  42. 2026-04-22 16:41:43,924 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '11', 'ams_exist_bits_raw': '11', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '1000d', 'tray_hall_out_bits': '1', 'tray_is_bbl_bits': '1000d', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '1000d', 'tray_reading_bits': '0', 'tray_tar': '0', 'unbind_ams_stat': 0, 'version': 113}
    43. 

  43. 2026-04-22 16:41:43,924 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 0
    44. 

  44. 2026-04-22 16:41:43,924 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    45. 

  45. 2026-04-22 16:41:43,925 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    46. 

  46. 2026-04-22 16:41:43,925 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    47. 

  47. 2026-04-22 16:41:43,925 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '128': 0}
    48. 

  48. 2026-04-22 16:41:43,925 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    49. 

  49. 2026-04-22 16:41:43,925 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    50. 

  50. 2026-04-22 16:41:43,925 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    51. 

  51. 2026-04-22 16:41:43,925 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    52. 

  52. 2026-04-22 16:41:43,925 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    53. 

  53. 2026-04-22 16:41:43,926 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    54. 

  54. 2026-04-22 16:41:43,926 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    55. 

  55. 2026-04-22 16:41:43,926 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    56. 

  56. 2026-04-22 16:41:43,926 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    57. 

  57. 2026-04-22 16:41:43,926 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    58. 

  58. 2026-04-22 16:41:43,926 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    59. 

  59. 2026-04-22 16:41:43,926 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    60. 

  60. 2026-04-22 16:41:43,927 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    61. 

  61. 2026-04-22 16:41:45,070 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8089287, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    62. 

  62. 2026-04-22 16:41:45,070 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    63. 

  63. 2026-04-22 16:41:45,070 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089287 (binary: 0b11110110110111011000111)
    64. 

  64. 2026-04-22 16:41:45,071 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Standard_Extra_Tall_Drawer_Komplett_plate_5
    65. 

  65. 2026-04-22 16:41:45,071 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '11', 'ams_exist_bits_raw': '11', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '1000d', 'tray_hall_out_bits': '1', 'tray_is_bbl_bits': '1000d', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '1000d', 'tray_reading_bits': '0', 'tray_tar': '0', 'unbind_ams_stat': 0, 'version': 113}
    66. 

  66. 2026-04-22 16:41:45,071 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 0
    67. 

  67. 2026-04-22 16:41:45,071 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    68. 

  68. 2026-04-22 16:41:45,071 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    69. 

  69. 2026-04-22 16:41:45,071 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    70. 

  70. 2026-04-22 16:41:45,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '128': 0}
    71. 

  71. 2026-04-22 16:41:45,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    72. 

  72. 2026-04-22 16:41:45,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    73. 

  73. 2026-04-22 16:41:45,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    74. 

  74. 2026-04-22 16:41:45,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    75. 

  75. 2026-04-22 16:41:45,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    76. 

  76. 2026-04-22 16:41:45,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    77. 

  77. 2026-04-22 16:41:45,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    78. 

  78. 2026-04-22 16:41:45,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    79. 

  79. 2026-04-22 16:41:45,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    80. 

  80. 2026-04-22 16:41:45,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    81. 

  81. 2026-04-22 16:41:45,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    82. 

  82. 2026-04-22 16:41:45,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    83. 

  83. 2026-04-22 16:41:45,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    84. 

  84. 2026-04-22 16:41:46,198 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8089287, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    85. 

  85. 2026-04-22 16:41:46,198 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    86. 

  86. 2026-04-22 16:41:46,198 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089287 (binary: 0b11110110110111011000111)
    87. 

  87. 2026-04-22 16:41:46,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Standard_Extra_Tall_Drawer_Komplett_plate_5
    88. 

  88. 2026-04-22 16:41:46,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '11', 'ams_exist_bits_raw': '11', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '1000d', 'tray_hall_out_bits': '1', 'tray_is_bbl_bits': '1000d', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '1000d', 'tray_reading_bits': '0', 'tray_tar': '0', 'unbind_ams_stat': 0, 'version': 113}
    89. 

  89. 2026-04-22 16:41:46,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 0
    90. 

  90. 2026-04-22 16:41:46,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    91. 

  91. 2026-04-22 16:41:46,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    92. 

  92. 2026-04-22 16:41:46,199 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    93. 

  93. 2026-04-22 16:41:46,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '128': 0}
    94. 

  94. 2026-04-22 16:41:46,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    95. 

  95. 2026-04-22 16:41:46,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    96. 

  96. 2026-04-22 16:41:46,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    97. 

  97. 2026-04-22 16:41:46,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    98. 

  98. 2026-04-22 16:41:46,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    99. 

  99. 2026-04-22 16:41:46,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    100. 

  100. 2026-04-22 16:41:46,200 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    101. 

  101. 2026-04-22 16:41:46,201 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    102. 

  102. 2026-04-22 16:41:46,201 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    103. 

  103. 2026-04-22 16:41:46,201 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    104. 

  104. 2026-04-22 16:41:46,201 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    105. 

  105. 2026-04-22 16:41:46,201 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    106. 

  106. 2026-04-22 16:41:46,201 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    107. 

  107. 2026-04-22 16:41:47,153 DEBUG [backend.app.services.print_scheduler] Printer 1: not idle — state=RUNNING
    108. 

  108. 2026-04-22 16:41:47,153 DEBUG [backend.app.services.print_scheduler] Auto-drying: printer 1 skipped — not idle
    109. 

  109. 2026-04-22 16:41:47,416 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8089287, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    110. 

  110. 2026-04-22 16:41:47,417 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    111. 

  111. 2026-04-22 16:41:47,417 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089287 (binary: 0b11110110110111011000111)
    112. 

  112. 2026-04-22 16:41:47,417 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Standard_Extra_Tall_Drawer_Komplett_plate_5
    113. 

  113. 2026-04-22 16:41:47,417 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '11', 'ams_exist_bits_raw': '11', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '1000d', 'tray_hall_out_bits': '1', 'tray_is_bbl_bits': '1000d', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '1000d', 'tray_reading_bits': '0', 'tray_tar': '0', 'unbind_ams_stat': 0, 'version': 113}
    114. 

  114. 2026-04-22 16:41:47,417 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 0
    115. 

  115. 2026-04-22 16:41:47,417 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    116. 

  116. 2026-04-22 16:41:47,417 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    117. 

  117. 2026-04-22 16:41:47,418 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    118. 

  118. 2026-04-22 16:41:47,418 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '128': 0}
    119. 

  119. 2026-04-22 16:41:47,418 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    120. 

  120. 2026-04-22 16:41:47,418 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    121. 

  121. 2026-04-22 16:41:47,418 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    122. 

  122. 2026-04-22 16:41:47,418 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    123. 

  123. 2026-04-22 16:41:47,418 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    124. 

  124. 2026-04-22 16:41:47,418 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    125. 

  125. 2026-04-22 16:41:47,419 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    126. 

  126. 2026-04-22 16:41:47,419 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    127. 

  127. 2026-04-22 16:41:47,419 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    128. 

  128. 2026-04-22 16:41:47,419 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    129. 

  129. 2026-04-22 16:41:47,419 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    130. 

  130. 2026-04-22 16:41:47,419 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    131. 

  131. 2026-04-22 16:41:47,419 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    132. 

  132. 2026-04-22 16:41:48,645 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8089287, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    133. 

  133. 2026-04-22 16:41:48,646 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    134. 

  134. 2026-04-22 16:41:48,646 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089287 (binary: 0b11110110110111011000111)
    135. 

  135. 2026-04-22 16:41:48,646 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Standard_Extra_Tall_Drawer_Komplett_plate_5
    136. 

  136. 2026-04-22 16:41:48,646 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '11', 'ams_exist_bits_raw': '11', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '1000d', 'tray_hall_out_bits': '1', 'tray_is_bbl_bits': '1000d', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '1000d', 'tray_reading_bits': '0', 'tray_tar': '0', 'unbind_ams_stat': 0, 'version': 113}
    137. 

  137. 2026-04-22 16:41:48,646 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 0
    138. 

  138. 2026-04-22 16:41:48,646 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    139. 

  139. 2026-04-22 16:41:48,646 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    140. 

  140. 2026-04-22 16:41:48,647 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    141. 

  141. 2026-04-22 16:41:48,647 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '128': 0}
    142. 

  142. 2026-04-22 16:41:48,647 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    143. 

  143. 2026-04-22 16:41:48,647 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    144. 

  144. 2026-04-22 16:41:48,647 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    145. 

  145. 2026-04-22 16:41:48,647 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    146. 

  146. 2026-04-22 16:41:48,647 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    147. 

  147. 2026-04-22 16:41:48,647 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    148. 

  148. 2026-04-22 16:41:48,648 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    149. 

  149. 2026-04-22 16:41:48,648 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    150. 

  150. 2026-04-22 16:41:48,648 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    151. 

  151. 2026-04-22 16:41:48,648 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    152. 

  152. 2026-04-22 16:41:48,648 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    153. 

  153. 2026-04-22 16:41:48,648 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    154. 

  154. 2026-04-22 16:41:48,648 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    155. 

  155. 2026-04-22 16:41:49,811 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8089287, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    156. 

  156. 2026-04-22 16:41:49,811 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    157. 

  157. 2026-04-22 16:41:49,811 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089287 (binary: 0b11110110110111011000111)
    158. 

  158. 2026-04-22 16:41:49,812 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Standard_Extra_Tall_Drawer_Komplett_plate_5
    159. 

  159. 2026-04-22 16:41:49,812 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '11', 'ams_exist_bits_raw': '11', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '1000d', 'tray_hall_out_bits': '1', 'tray_is_bbl_bits': '1000d', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '1000d', 'tray_reading_bits': '0', 'tray_tar': '0', 'unbind_ams_stat': 0, 'version': 113}
    160. 

  160. 2026-04-22 16:41:49,812 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 0
    161. 

  161. 2026-04-22 16:41:49,812 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    162. 

  162. 2026-04-22 16:41:49,812 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    163. 

  163. 2026-04-22 16:41:49,812 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    164. 

  164. 2026-04-22 16:41:49,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '128': 0}
    165. 

  165. 2026-04-22 16:41:49,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    166. 

  166. 2026-04-22 16:41:49,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    167. 

  167. 2026-04-22 16:41:49,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    168. 

  168. 2026-04-22 16:41:49,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    169. 

  169. 2026-04-22 16:41:49,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    170. 

  170. 2026-04-22 16:41:49,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    171. 

  171. 2026-04-22 16:41:49,813 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    172. 

  172. 2026-04-22 16:41:49,814 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    173. 

  173. 2026-04-22 16:41:49,814 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    174. 

  174. 2026-04-22 16:41:49,814 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    175. 

  175. 2026-04-22 16:41:49,814 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    176. 

  176. 2026-04-22 16:41:49,814 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    177. 

  177. 2026-04-22 16:41:49,814 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    178. 

  178. 2026-04-22 16:41:51,134 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'cfg': 8089287, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    179. 

  179. 2026-04-22 16:41:51,134 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'cfg', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    180. 

  180. 2026-04-22 16:41:51,134 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] xcam cfg bitmask: 8089287 (binary: 0b11110110110111011000111)
    181. 

  181. 2026-04-22 16:41:51,135 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_5.gcode, subtask_name: Standard_Extra_Tall_Drawer_Komplett_plate_5
    182. 

  182. 2026-04-22 16:41:51,135 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '11', 'ams_exist_bits_raw': '11', 'cali_id': 255, 'cali_stat': 0, 'cfs': [], 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': '1000d', 'tray_hall_out_bits': '1', 'tray_is_bbl_bits': '1000d', 'tray_now': '0', 'tray_pre': '0', 'tray_read_done_bits': '1000d', 'tray_reading_bits': '0', 'tray_tar': '0', 'unbind_ams_stat': 0, 'version': 113}
    183. 

  183. 2026-04-22 16:41:51,135 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 0
    184. 

  184. 2026-04-22 16:41:51,135 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 2 new units, 2 total
    185. 

  185. 2026-04-22 16:41:51,135 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 0 info=0x10001003 -> extruder 0
    186. 

  186. 2026-04-22 16:41:51,135 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS 128 info=0x10002004 -> extruder 0
    187. 

  187. 2026-04-22 16:41:51,136 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_extruder_map: {'0': 0, '128': 0}
    188. 

  188. 2026-04-22 16:41:51,136 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 768 (main=3, sub=0)
    189. 

  189. 2026-04-22 16:41:51,136 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    190. 

  190. 2026-04-22 16:41:51,136 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] device.extruder.state=1 (switch_state bits 12-14: 0)
    191. 

  191. 2026-04-22 16:41:51,136 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] info.temp direct: 28°C (heater OFF)
    192. 

  192. 2026-04-22 16:41:51,136 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ctc_info keys: ['temp']
    193. 

  193. 2026-04-22 16:41:51,137 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=28.0, heating=False, respect_local=False
    194. 

  194. 2026-04-22 16:41:51,137 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 28.0, target: 0.0, heating: False
    195. 

  195. 2026-04-22 16:41:51,137 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: [{'attr': 83887616, 'code': 131184, 'ts_boot': 33839, 'ts_unix': '20260321041330'}]
    196. 

  196. 2026-04-22 16:41:51,137 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'brtc_service': 'enable', 'bs_state': 0, 'cap_pic_enable': 'invalid', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'laser_preview_res': 7, 'liveview_preview': True, 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tl_external_free_kb': 108516288, 'tl_external_total_kb': 120112000, 'tl_internal_free_kb': 962560, 'tl_internal_total_kb': 962560, 'tl_store_hpd_type': 2, 'tl_store_path_type': 2, 'tutk_server': 'disable'}
    197. 

  197. 2026-04-22 16:41:51,137 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -50dBm
    198. 

  198. 2026-04-22 16:41:51,137 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    199. 

  199. 2026-04-22 16:41:51,137 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] MQTT mapping field: [65535, 65535, 0]
    200. 

  200. 2026-04-22 16:41:51,137 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_5.gcode, subtask: Standard_Extra_Tall_Drawer_Komplett_plate_5
    201.