Startsida Utforska Hjälp
Logga in
yunoadmin
/
bambuddy
spegling av https://github.com/maziggy/bambuddy
1
0
Fork 0
Filer Ärenden 0 Wiki
Träd: 1e011b0c6e
Grenar Taggar
bambuddy
/
logs
/
2e3a3b1cd5904f348fdcbc62938992f4.log

2e3a3b1cd5904f348fdcbc62938992f4.log 33 KB
Historik Rå

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200 
  1. 2026-04-14 11:29:59,949 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    2. 

  2. 2026-04-14 11:29:59,949 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    3. 

  3. 2026-04-14 11:29:59,950 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    4. 

  4. 2026-04-14 11:29:59,950 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    5. 

  5. 2026-04-14 11:29:59,950 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    6. 

  6. 2026-04-14 11:29:59,950 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    7. 

  7. 2026-04-14 11:29:59,966 DEBUG [backend.app.services.camera] TLS proxy for [IP]:322 listening on [IP]:39655
    8. 

  8. 2026-04-14 11:29:59,966 WARNING [backend.app.services.camera] ffmpeg not found in PATH or common locations
    9. 

  9. 2026-04-14 11:29:59,967 ERROR [backend.app.services.camera] ffmpeg not found for camera frame capture
    10. 

  10. 2026-04-14 11:30:00,938 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    11. 

  11. 2026-04-14 11:30:00,938 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    12. 

  12. 2026-04-14 11:30:00,939 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    13. 

  13. 2026-04-14 11:30:00,939 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    14. 

  14. 2026-04-14 11:30:00,939 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    15. 

  15. 2026-04-14 11:30:00,939 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    16. 

  16. 2026-04-14 11:30:00,940 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    17. 

  17. 2026-04-14 11:30:00,940 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    18. 

  18. 2026-04-14 11:30:00,940 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    19. 

  19. 2026-04-14 11:30:00,940 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    20. 

  20. 2026-04-14 11:30:00,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    21. 

  21. 2026-04-14 11:30:00,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    22. 

  22. 2026-04-14 11:30:00,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    23. 

  23. 2026-04-14 11:30:00,941 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    24. 

  24. 2026-04-14 11:30:00,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    25. 

  25. 2026-04-14 11:30:00,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    26. 

  26. 2026-04-14 11:30:00,942 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    27. 

  27. 2026-04-14 11:30:02,023 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    28. 

  28. 2026-04-14 11:30:02,024 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    29. 

  29. 2026-04-14 11:30:02,024 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    30. 

  30. 2026-04-14 11:30:02,024 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    31. 

  31. 2026-04-14 11:30:02,024 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    32. 

  32. 2026-04-14 11:30:02,025 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    33. 

  33. 2026-04-14 11:30:02,025 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    34. 

  34. 2026-04-14 11:30:02,025 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    35. 

  35. 2026-04-14 11:30:02,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    36. 

  36. 2026-04-14 11:30:02,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    37. 

  37. 2026-04-14 11:30:02,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    38. 

  38. 2026-04-14 11:30:02,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    39. 

  39. 2026-04-14 11:30:02,026 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    40. 

  40. 2026-04-14 11:30:02,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    41. 

  41. 2026-04-14 11:30:02,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    42. 

  42. 2026-04-14 11:30:02,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    43. 

  43. 2026-04-14 11:30:02,027 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    44. 

  44. 2026-04-14 11:30:02,141 INFO [backend.app.api.routes.camera] Using RTSP protocol for X1C
    45. 

  45. 2026-04-14 11:30:02,142 WARNING [backend.app.services.camera] ffmpeg not found in PATH or common locations
    46. 

  46. 2026-04-14 11:30:02,142 ERROR [backend.app.api.routes.camera] ffmpeg not found - camera streaming requires ffmpeg
    47. 

  47. 2026-04-14 11:30:02,966 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    48. 

  48. 2026-04-14 11:30:02,966 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    49. 

  49. 2026-04-14 11:30:02,966 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    50. 

  50. 2026-04-14 11:30:02,966 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    51. 

  51. 2026-04-14 11:30:02,967 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    52. 

  52. 2026-04-14 11:30:02,967 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    53. 

  53. 2026-04-14 11:30:02,967 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    54. 

  54. 2026-04-14 11:30:02,967 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    55. 

  55. 2026-04-14 11:30:02,968 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    56. 

  56. 2026-04-14 11:30:02,968 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    57. 

  57. 2026-04-14 11:30:02,968 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    58. 

  58. 2026-04-14 11:30:02,968 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    59. 

  59. 2026-04-14 11:30:02,969 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    60. 

  60. 2026-04-14 11:30:02,969 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    61. 

  61. 2026-04-14 11:30:02,969 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    62. 

  62. 2026-04-14 11:30:02,969 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    63. 

  63. 2026-04-14 11:30:02,970 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    64. 

  64. 2026-04-14 11:30:04,002 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    65. 

  65. 2026-04-14 11:30:04,002 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    66. 

  66. 2026-04-14 11:30:04,003 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    67. 

  67. 2026-04-14 11:30:04,003 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    68. 

  68. 2026-04-14 11:30:04,003 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    69. 

  69. 2026-04-14 11:30:04,004 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    70. 

  70. 2026-04-14 11:30:04,004 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    71. 

  71. 2026-04-14 11:30:04,004 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    72. 

  72. 2026-04-14 11:30:04,005 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    73. 

  73. 2026-04-14 11:30:04,005 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    74. 

  74. 2026-04-14 11:30:04,005 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    75. 

  75. 2026-04-14 11:30:04,005 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    76. 

  76. 2026-04-14 11:30:04,005 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    77. 

  77. 2026-04-14 11:30:04,006 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    78. 

  78. 2026-04-14 11:30:04,006 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    79. 

  79. 2026-04-14 11:30:04,006 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    80. 

  80. 2026-04-14 11:30:04,007 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    81. 

  81. 2026-04-14 11:30:05,010 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    82. 

  82. 2026-04-14 11:30:05,010 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    83. 

  83. 2026-04-14 11:30:05,010 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    84. 

  84. 2026-04-14 11:30:05,010 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    85. 

  85. 2026-04-14 11:30:05,011 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    86. 

  86. 2026-04-14 11:30:05,011 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    87. 

  87. 2026-04-14 11:30:05,011 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    88. 

  88. 2026-04-14 11:30:05,011 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    89. 

  89. 2026-04-14 11:30:05,012 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    90. 

  90. 2026-04-14 11:30:05,012 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    91. 

  91. 2026-04-14 11:30:05,012 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    92. 

  92. 2026-04-14 11:30:05,012 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    93. 

  93. 2026-04-14 11:30:05,013 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    94. 

  94. 2026-04-14 11:30:05,013 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    95. 

  95. 2026-04-14 11:30:05,013 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    96. 

  96. 2026-04-14 11:30:05,013 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    97. 

  97. 2026-04-14 11:30:05,014 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    98. 

  98. 2026-04-14 11:30:06,020 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    99. 

  99. 2026-04-14 11:30:06,020 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    100. 

  100. 2026-04-14 11:30:06,020 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    101. 

  101. 2026-04-14 11:30:06,020 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    102. 

  102. 2026-04-14 11:30:06,021 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    103. 

  103. 2026-04-14 11:30:06,021 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    104. 

  104. 2026-04-14 11:30:06,021 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    105. 

  105. 2026-04-14 11:30:06,021 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    106. 

  106. 2026-04-14 11:30:06,022 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    107. 

  107. 2026-04-14 11:30:06,022 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    108. 

  108. 2026-04-14 11:30:06,022 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    109. 

  109. 2026-04-14 11:30:06,022 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    110. 

  110. 2026-04-14 11:30:06,023 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    111. 

  111. 2026-04-14 11:30:06,023 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    112. 

  112. 2026-04-14 11:30:06,023 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    113. 

  113. 2026-04-14 11:30:06,023 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    114. 

  114. 2026-04-14 11:30:06,024 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    115. 

  115. 2026-04-14 11:30:07,028 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    116. 

  116. 2026-04-14 11:30:07,029 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    117. 

  117. 2026-04-14 11:30:07,029 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    118. 

  118. 2026-04-14 11:30:07,029 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    119. 

  119. 2026-04-14 11:30:07,029 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    120. 

  120. 2026-04-14 11:30:07,030 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    121. 

  121. 2026-04-14 11:30:07,030 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    122. 

  122. 2026-04-14 11:30:07,030 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    123. 

  123. 2026-04-14 11:30:07,030 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    124. 

  124. 2026-04-14 11:30:07,031 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    125. 

  125. 2026-04-14 11:30:07,031 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    126. 

  126. 2026-04-14 11:30:07,031 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    127. 

  127. 2026-04-14 11:30:07,031 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    128. 

  128. 2026-04-14 11:30:07,032 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    129. 

  129. 2026-04-14 11:30:07,032 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    130. 

  130. 2026-04-14 11:30:07,032 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    131. 

  131. 2026-04-14 11:30:07,032 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    132. 

  132. 2026-04-14 11:30:07,685 INFO [backend.app.api.routes.camera] Stopped 0 camera stream(s) for printer 1
    133. 

  133. 2026-04-14 11:30:08,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    134. 

  134. 2026-04-14 11:30:08,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    135. 

  135. 2026-04-14 11:30:08,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    136. 

  136. 2026-04-14 11:30:08,052 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    137. 

  137. 2026-04-14 11:30:08,052 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    138. 

  138. 2026-04-14 11:30:08,052 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    139. 

  139. 2026-04-14 11:30:08,052 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    140. 

  140. 2026-04-14 11:30:08,053 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    141. 

  141. 2026-04-14 11:30:08,053 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    142. 

  142. 2026-04-14 11:30:08,053 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    143. 

  143. 2026-04-14 11:30:08,053 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    144. 

  144. 2026-04-14 11:30:08,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    145. 

  145. 2026-04-14 11:30:08,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    146. 

  146. 2026-04-14 11:30:08,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    147. 

  147. 2026-04-14 11:30:08,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    148. 

  148. 2026-04-14 11:30:08,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    149. 

  149. 2026-04-14 11:30:08,055 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    150. 

  150. 2026-04-14 11:30:09,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    151. 

  151. 2026-04-14 11:30:09,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    152. 

  152. 2026-04-14 11:30:09,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    153. 

  153. 2026-04-14 11:30:09,051 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    154. 

  154. 2026-04-14 11:30:09,052 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    155. 

  155. 2026-04-14 11:30:09,052 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    156. 

  156. 2026-04-14 11:30:09,052 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    157. 

  157. 2026-04-14 11:30:09,052 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    158. 

  158. 2026-04-14 11:30:09,053 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    159. 

  159. 2026-04-14 11:30:09,053 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    160. 

  160. 2026-04-14 11:30:09,053 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    161. 

  161. 2026-04-14 11:30:09,053 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    162. 

  162. 2026-04-14 11:30:09,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    163. 

  163. 2026-04-14 11:30:09,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    164. 

  164. 2026-04-14 11:30:09,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    165. 

  165. 2026-04-14 11:30:09,054 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    166. 

  166. 2026-04-14 11:30:09,055 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    167. 

  167. 2026-04-14 11:30:10,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    168. 

  168. 2026-04-14 11:30:10,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    169. 

  169. 2026-04-14 11:30:10,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    170. 

  170. 2026-04-14 11:30:10,072 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    171. 

  171. 2026-04-14 11:30:10,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    172. 

  172. 2026-04-14 11:30:10,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    173. 

  173. 2026-04-14 11:30:10,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    174. 

  174. 2026-04-14 11:30:10,073 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    175. 

  175. 2026-04-14 11:30:10,074 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    176. 

  176. 2026-04-14 11:30:10,074 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    177. 

  177. 2026-04-14 11:30:10,074 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    178. 

  178. 2026-04-14 11:30:10,075 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    179. 

  179. 2026-04-14 11:30:10,075 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    180. 

  180. 2026-04-14 11:30:10,075 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    181. 

  181. 2026-04-14 11:30:10,075 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    182. 

  182. 2026-04-14 11:30:10,075 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    183. 

  183. 2026-04-14 11:30:10,076 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    184. 

  184. 2026-04-14 11:30:11,075 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': False, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
    185. 

  185. 2026-04-14 11:30:11,076 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
    186. 

  186. 2026-04-14 11:30:11,076 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received gcode_state: FINISH, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: DW_TS_Large_Single_Divider.gcode.3mf
    187. 

  187. 2026-04-14 11:30:11,076 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '1', 'ams_exist_bits_raw': '1', 'insert_flag': True, 'power_on_flag': True, 'tray_exist_bits': 'f', 'tray_is_bbl_bits': 'f', 'tray_now': '255', 'tray_pre': '255', 'tray_read_done_bits': 'f', 'tray_reading_bits': '0', 'tray_tar': '255', 'version': 7446}
    188. 

  188. 2026-04-14 11:30:11,076 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] tray_now updated: 255
    189. 

  189. 2026-04-14 11:30:11,077 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Merged AMS data: 1 new units, 1 total
    190. 

  190. 2026-04-14 11:30:11,077 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ams_status: 0 (main=0, sub=0)
    191. 

  191. 2026-04-14 11:30:11,077 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Received command response: push_status
    192. 

  192. 2026-04-14 11:30:11,077 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper raw value: 25.0
    193. 

  193. 2026-04-14 11:30:11,078 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] chamber_temper direct value: 25.0°C (heater OFF)
    194. 

  194. 2026-04-14 11:30:11,078 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber heating calculated: target=0.0, current=25.0, heating=False, respect_local=False
    195. 

  195. 2026-04-14 11:30:11,078 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] Chamber temp updated to: 25.0, target: 0.0, heating: False
    196. 

  196. 2026-04-14 11:30:11,078 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] HMS data received: []
    197. 

  197. 2026-04-14 11:30:11,079 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] ipcam field: {'agora_service': 'disable', 'ipcam_dev': '1', 'ipcam_record': 'disable', 'mode_bits': 2, 'resolution': '1080p', 'rtsp_url': 'rtsps://[IP]:322/streaming/live/1', 'timelapse': 'disable', 'tutk_server': 'disable'}
    198. 

  198. 2026-04-14 11:30:11,079 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] wifi_signal received: -51dBm
    199. 

  199. 2026-04-14 11:30:11,079 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
    200. 

  200. 2026-04-14 11:30:11,079 DEBUG [backend.app.services.bambu_mqtt] [[SERIAL]] gcode_state: FINISH -> FINISH, file: /data/Metadata/plate_1.gcode, subtask: DW_TS_Large_Single_Divider.gcode.3mf
    201.