Setup Required
Missing Python packages
To fix, run this command on your server:
pip install -r requirements.txt
Or if using a virtual environment:
./venv/bin/pip install -r requirements.txt
After installing, restart Bambuddy:
sudo systemctl restart bambuddy
"""
class ErrorHandler(BaseHTTPRequestHandler):
def do_GET(self):
self.send_response(503)
self.send_header("Content-type", "text/html")
self.end_headers()
self.wfile.write(html.encode())
def log_message(self, format, *args):
print(f"[Error Server] {args[0]}")
port = int(os.environ.get("PORT", 8000))
print(f"\nStarting error server on http://0.0.0.0:{port}")
print("Visit this URL in your browser to see the error details.\n")
server = HTTPServer(("0.0.0.0", port), ErrorHandler) # nosec B104
def shutdown(signum, frame):
print("\nShutting down error server...")
raise SystemExit(0)
signal.signal(signal.SIGTERM, shutdown)
signal.signal(signal.SIGINT, shutdown)
server.serve_forever()
def check_dependencies():
"""Check that all required packages are installed."""
missing = []
# Map of import name -> package name (for pip install)
required = {
"jwt": "PyJWT",
"fastapi": "fastapi",
"uvicorn": "uvicorn",
"sqlalchemy": "sqlalchemy",
"aiosqlite": "aiosqlite",
"pydantic": "pydantic",
"paho.mqtt": "paho-mqtt",
}
for module, package in required.items():
try:
__import__(module)
except ImportError:
missing.append(package)
if missing:
print("\n" + "=" * 60)
print("ERROR: Missing required Python packages!")
print("=" * 60)
print(f"\nMissing packages: {', '.join(missing)}")
print("\nTo fix, run:")
print(" pip install -r requirements.txt")
print("\nOr if using a virtual environment:")
print(" ./venv/bin/pip install -r requirements.txt")
print("=" * 60 + "\n")
_start_error_server(missing)
check_dependencies()
# =============================================================================
# Import settings first for logging configuration
# Configure logging based on settings
# DEBUG=true -> DEBUG level, else use LOG_LEVEL setting
log_level_str = "DEBUG" if app_settings.debug else app_settings.log_level.upper()
log_level = getattr(logging, log_level_str, logging.INFO)
log_format = "%(asctime)s %(levelname)s [%(name)s] %(message)s"
# Create root logger
root_logger = logging.getLogger()
root_logger.setLevel(log_level)
# Console handler - always enabled
console_handler = logging.StreamHandler()
console_handler.setLevel(log_level)
console_handler.setFormatter(logging.Formatter(log_format))
root_logger.addHandler(console_handler)
# File handler - only in production or if explicitly enabled
if app_settings.log_to_file:
log_file = app_settings.log_dir / "bambuddy.log"
file_handler = RotatingFileHandler(
log_file,
maxBytes=5 * 1024 * 1024, # 5MB
backupCount=3,
encoding="utf-8",
)
file_handler.setLevel(log_level)
file_handler.setFormatter(logging.Formatter(log_format))
root_logger.addHandler(file_handler)
logging.info("Logging to file: %s", log_file)
# Reduce noise from third-party libraries in production
if not app_settings.debug:
logging.getLogger("sqlalchemy.engine").setLevel(logging.WARNING)
logging.getLogger("httpcore").setLevel(logging.WARNING)
logging.getLogger("httpx").setLevel(logging.WARNING)
logging.getLogger("paho.mqtt").setLevel(logging.WARNING)
logging.info("Bambuddy starting - debug=%s, log_level=%s", app_settings.debug, log_level_str)
# Track active prints: {(printer_id, filename): archive_id}
_active_prints: dict[tuple[int, str], int] = {}
# Track expected prints from reprint/scheduled (skip auto-archiving for these)
# {(printer_id, filename): archive_id}
_expected_prints: dict[tuple[int, str], int] = {}
# Track starting energy for prints: {archive_id: starting_kwh}
_print_energy_start: dict[int, float] = {}
# Track AMS mapping for prints: {archive_id: [global_tray_id_per_slot]}
# Used by usage tracker to map 3MF slots to physical AMS trays
_print_ams_mappings: dict[int, list[int]] = {}
# Track progress milestones for notifications: {printer_id: last_milestone_notified}
# Milestones are 25, 50, 75. Value of 0 means no milestone notified yet for current print.
_last_progress_milestone: dict[int, int] = {}
# Track whether first layer complete notification has been sent for current print
_first_layer_notified: dict[int, bool] = {}
# Track HMS errors that have been notified: {printer_id: set of error codes}
# This prevents sending duplicate notifications for the same error
_notified_hms_errors: dict[int, set[str]] = {}
# Track when HMS errors were last seen: {printer_id: timestamp}
# Used to debounce clearing — prevents flapping errors from re-triggering notifications
_hms_last_seen: dict[int, float] = {}
_HMS_CLEAR_GRACE_SECONDS = 30.0
# Track timelapse file baselines at print start: {printer_id: set of video filenames}
# Used for snapshot-diff detection at print completion
_timelapse_baselines: dict[int, set[str]] = {}
# Track active bed cooldown monitoring tasks: {printer_id: asyncio.Task}
_bed_cooldown_tasks: dict[int, asyncio.Task] = {}
# Track printers where the user explicitly stopped the print from the queue UI.
# When on_print_complete fires with status "failed" for these printers we treat it
# as "cancelled" (stopped by user) so the correct notification email is sent.
_user_stopped_printers: set[int] = set()
# Track created_by_id for expected prints so the user email can be sent even when
# the archive itself doesn't have created_by_id set (e.g. library-file-based prints).
# {(printer_id, filename): created_by_id}
_expected_print_creators: dict[tuple[int, str], int] = {}
# TTL for expected-print entries: evict registrations older than this to prevent
# unbounded growth when a print is registered but never starts (e.g. printer
# disconnect, app restart, print started from the printer panel).
_EXPECTED_PRINT_TTL_SECONDS: int = 2 * 60 * 60 # 2 hours
# Registration timestamps used for TTL eviction: {(printer_id, filename): monotonic_time}
_expected_print_registered_at: dict[tuple[int, str], float] = {}
# Cleanup loop interval
_EXPECTED_PRINT_CLEANUP_INTERVAL: int = 15 * 60 # 15 minutes
_expected_prints_cleanup_task: asyncio.Task | None = None
async def _get_plug_energy(plug, db) -> dict | None:
"""Get energy from plug regardless of type (Tasmota, Home Assistant, or MQTT).
For HA plugs, configures the service with current settings from DB.
For MQTT plugs, returns data from the subscription service.
"""
if plug.plug_type == "homeassistant":
from backend.app.api.routes.settings import get_homeassistant_settings
ha_settings = await get_homeassistant_settings(db)
homeassistant_service.configure(ha_settings["ha_url"], ha_settings["ha_token"])
return await homeassistant_service.get_energy(plug)
elif plug.plug_type == "mqtt":
# MQTT plugs report "today" energy, not lifetime total
# For per-print tracking, we use "today" as the counter (resets at midnight)
mqtt_data = mqtt_relay.smart_plug_service.get_plug_data(plug.id)
if mqtt_data:
return {
"power": mqtt_data.power,
"today": mqtt_data.energy,
"total": mqtt_data.energy, # Use today as total for per-print calculations
}
return None
else:
return await tasmota_service.get_energy(plug)
def register_expected_print(
printer_id: int,
filename: str,
archive_id: int,
ams_mapping: list[int] | None = None,
created_by_id: int | None = None,
):
"""Register an expected print from reprint/scheduled so we don't create duplicate archives."""
# Store with multiple filename variations to catch different naming patterns
_expected_prints[(printer_id, filename)] = archive_id
# Also store without .3mf extension if present
if filename.endswith(".3mf"):
base = filename[:-4]
_expected_prints[(printer_id, base)] = archive_id
_expected_prints[(printer_id, f"{base}.gcode")] = archive_id
# Store AMS mapping for usage tracking at print completion
if ams_mapping is not None:
_print_ams_mappings[archive_id] = ams_mapping
# Store created_by_id so the user start email can be sent even when the archive
# itself has no created_by_id (e.g. library-file-based queue prints)
if created_by_id is not None:
_expected_print_creators[(printer_id, filename)] = created_by_id
if filename.endswith(".3mf"):
base = filename[:-4]
_expected_print_creators[(printer_id, base)] = created_by_id
_expected_print_creators[(printer_id, f"{base}.gcode")] = created_by_id
# Record registration time for TTL-based eviction
_registered_at = time.monotonic()
_expected_print_registered_at[(printer_id, filename)] = _registered_at
if filename.endswith(".3mf"):
base = filename[:-4]
_expected_print_registered_at[(printer_id, base)] = _registered_at
_expected_print_registered_at[(printer_id, f"{base}.gcode")] = _registered_at
logging.getLogger(__name__).info(
f"Registered expected print: printer={printer_id}, file={filename}, archive={archive_id}, ams_mapping={ams_mapping}"
)
def _get_start_ams_mapping(data: dict, archive_id: int | None) -> list[int] | None:
"""Resolve AMS mapping for print start without consuming stored queue/reprint state."""
stored_ams_mapping = data.get("ams_mapping")
if not stored_ams_mapping and archive_id:
stored_ams_mapping = _print_ams_mappings.get(archive_id)
return stored_ams_mapping
def mark_printer_stopped_by_user(printer_id: int) -> None:
"""Mark that the active print on this printer was stopped by the user from the queue UI.
When on_print_complete fires with status 'failed' for a printer in this set we
reclassify it as 'cancelled' so the correct 'print stopped' notification is sent
rather than a 'print failed' notification.
"""
_user_stopped_printers.add(printer_id)
logging.getLogger(__name__).info("Marked printer %s as user-stopped from queue", printer_id)
_last_status_broadcast: dict[int, str] = {}
# Track printers where we've updated nozzle_count
_nozzle_count_updated: set[int] = set()
async def on_printer_status_change(printer_id: int, state: PrinterState):
"""Handle printer status changes - broadcast via WebSocket."""
# Only broadcast if something meaningful changed (reduce WebSocket spam)
# Include rounded temperatures to detect meaningful temp changes (within 1 degree)
temps = state.temperatures or {}
nozzle_temp = round(temps.get("nozzle", 0))
bed_temp = round(temps.get("bed", 0))
nozzle_2_temp = round(temps.get("nozzle_2", 0)) if "nozzle_2" in temps else ""
chamber_temp = round(temps.get("chamber", 0)) if "chamber" in temps else ""
# Auto-detect dual-nozzle printers from MQTT temperature data
if "nozzle_2" in temps and printer_id not in _nozzle_count_updated:
_nozzle_count_updated.add(printer_id)
# Update nozzle_count in database
async with async_session() as db:
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
if printer and printer.nozzle_count != 2:
printer.nozzle_count = 2
await db.commit()
logging.getLogger(__name__).info(
f"Auto-detected dual-nozzle printer {printer_id}, updated nozzle_count=2"
)
# Include target temps for heating phase detection
bed_target = round(temps.get("bed_target", 0))
nozzle_target = round(temps.get("nozzle_target", 0))
# Include tray_now and vt_tray hash so external spool changes trigger broadcasts
vt_tray_key = hash(str(state.raw_data.get("vt_tray", []))) if state.raw_data else 0
# Include AMS dry_time values so drying status changes trigger broadcasts
ams_dry_key = tuple(a.get("dry_time", 0) for a in (state.raw_data.get("ams") or [])) if state.raw_data else ()
status_key = (
f"{state.connected}:{state.state}:{state.progress}:{state.layer_num}:"
f"{nozzle_temp}:{bed_temp}:{nozzle_2_temp}:{chamber_temp}:"
f"{state.stg_cur}:{bed_target}:{nozzle_target}:"
f"{state.cooling_fan_speed}:{state.big_fan1_speed}:{state.big_fan2_speed}:"
f"{state.chamber_light}:{state.active_extruder}:{state.tray_now}:{vt_tray_key}:"
f"{ams_dry_key}"
)
# MQTT relay - publish status (before dedup check - always publish to MQTT)
try:
printer_info = printer_manager.get_printer(printer_id)
if printer_info:
await mqtt_relay.on_printer_status(printer_id, state, printer_info.name, printer_info.serial_number)
except Exception:
pass # Don't fail status callback if MQTT fails
if _last_status_broadcast.get(printer_id) == status_key:
return # No change, skip WebSocket broadcast
_last_status_broadcast[printer_id] = status_key
# Check for progress milestone notifications (25%, 50%, 75%)
progress = state.progress or 0
is_printing = state.state in ("RUNNING", "PRINTING")
if is_printing and progress > 0:
# Determine which milestone we've reached
current_milestone = 0
if progress >= 75:
current_milestone = 75
elif progress >= 50:
current_milestone = 50
elif progress >= 25:
current_milestone = 25
last_milestone = _last_progress_milestone.get(printer_id, 0)
# If we've crossed a new milestone, send notification
if current_milestone > last_milestone:
_last_progress_milestone[printer_id] = current_milestone
try:
async with async_session() as db:
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
printer_name = printer.name if printer else f"Printer {printer_id}"
filename = state.subtask_name or state.gcode_file or "Unknown"
# remaining_time is in minutes, convert to seconds for notification
remaining_time_seconds = state.remaining_time * 60 if state.remaining_time else None
# Capture camera snapshot for notification image attachment
image_data = await _capture_snapshot_for_notification(
printer_id, printer, logging.getLogger(__name__)
)
await notification_service.on_print_progress(
printer_id,
printer_name,
filename,
current_milestone,
db,
remaining_time_seconds,
image_data=image_data,
)
except Exception as e:
logging.getLogger(__name__).warning(f"Progress milestone notification failed: {e}")
elif progress < 5:
# Reset milestone tracking when print restarts or new print begins
_last_progress_milestone[printer_id] = 0
_first_layer_notified[printer_id] = False
# HMS error codes that should not trigger notifications even though they
# have known descriptions (e.g. user-initiated actions, not real errors).
_HMS_NOTIFICATION_SUPPRESS = {
"0500_400E", # Printing was cancelled (user action, not an error)
}
# Check for new HMS errors and send notifications
current_hms_errors = getattr(state, "hms_errors", []) or []
if current_hms_errors:
# Build set of current error codes (using attr for uniqueness)
current_error_codes = {f"{e.attr:08x}" for e in current_hms_errors}
previously_notified = _notified_hms_errors.get(printer_id, set())
# Find new errors that haven't been notified yet
new_error_codes = current_error_codes - previously_notified
# Update tracking immediately to prevent duplicate notifications from concurrent callbacks
_notified_hms_errors[printer_id] = current_error_codes
_hms_last_seen[printer_id] = time.time()
if new_error_codes:
# Get the actual new errors for the notification
# Filter to severity >= 2 (skip informational/status messages like H2D sends)
new_errors = [e for e in current_hms_errors if f"{e.attr:08x}" in new_error_codes and e.severity >= 2]
try:
async with async_session() as db:
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
printer_name = printer.name if printer else f"Printer {printer_id}"
# Format error details for notification
# Module 0x07 = AMS/Filament, 0x05 = Nozzle, 0x0C = Motion Controller, etc.
module_names = {
0x03: "Print/Task",
0x05: "Nozzle/Extruder",
0x07: "AMS/Filament",
0x0C: "Motion Controller",
0x12: "Chamber",
}
from backend.app.services.hms_errors import get_error_description
# Capture camera snapshot once for all error notifications
error_image_data = await _capture_snapshot_for_notification(
printer_id, printer, logging.getLogger(__name__)
)
sent_count = 0
for error in new_errors:
module_name = module_names.get(error.module, f"Module 0x{error.module:02X}")
# Build short code like "0700_8010"
# Mask to 16 bits to handle printers that send larger values
error_code_int = int(error.code.replace("0x", ""), 16) if error.code else 0
error_code_masked = error_code_int & 0xFFFF
short_code = f"{(error.attr >> 16) & 0xFFFF:04X}_{error_code_masked:04X}"
# Only notify for errors with known descriptions — printers
# send many undocumented/phantom codes that aren't real errors.
description = get_error_description(short_code)
if not description or short_code in _HMS_NOTIFICATION_SUPPRESS:
continue
error_type = f"{module_name} Error"
error_detail = description
await notification_service.on_printer_error(
printer_id, printer_name, error_type, db, error_detail, image_data=error_image_data
)
sent_count += 1
if sent_count:
logging.getLogger(__name__).info(
f"[HMS] Sent notification for {sent_count} error(s) on printer {printer_id}"
)
# Also publish to MQTT relay
printer_info = printer_manager.get_printer(printer_id)
if printer_info:
errors_data = [
{
"code": e.code,
"attr": e.attr,
"module": e.module,
"severity": e.severity,
}
for e in new_errors
]
await mqtt_relay.on_printer_error(
printer_id, printer_info.name, printer_info.serial_number, errors_data
)
except Exception as e:
logging.getLogger(__name__).warning(f"HMS error notification failed: {e}")
else:
# No HMS errors — only clear tracking after a grace period to prevent
# flapping errors (brief hms:[] gaps) from re-triggering notifications.
# Some HMS codes (e.g. chamber temp regulation during PETG prints) toggle
# on/off every few seconds as conditions fluctuate around thresholds.
if printer_id in _notified_hms_errors:
last_seen = _hms_last_seen.get(printer_id, 0)
if time.time() - last_seen >= _HMS_CLEAR_GRACE_SECONDS:
_notified_hms_errors.pop(printer_id, None)
_hms_last_seen.pop(printer_id, None)
await ws_manager.send_printer_status(
printer_id,
printer_state_to_dict(state, printer_id, printer_manager.get_model(printer_id)),
)
def _is_bambu_uuid(tray_uuid: str) -> bool:
"""Check if a tray UUID looks like a valid Bambu Lab RFID UUID (non-empty, non-zero)."""
return bool(tray_uuid) and tray_uuid not in ("", "0" * len(tray_uuid))
async def on_ams_change(printer_id: int, ams_data: list):
"""Handle AMS data changes - sync to Spoolman if enabled and auto mode."""
logger = logging.getLogger(__name__)
# MQTT relay - publish AMS change
try:
printer_info = printer_manager.get_printer(printer_id)
if printer_info:
await mqtt_relay.on_ams_change(printer_id, printer_info.name, printer_info.serial_number, ams_data)
except Exception:
pass # Don't fail AMS callback if MQTT fails
# Broadcast AMS change via WebSocket (bypasses status_key deduplication)
# This ensures frontend gets immediate updates when AMS slots are configured
try:
state = printer_manager.get_status(printer_id)
if state:
logger.info("[Printer %s] Broadcasting AMS change via WebSocket", printer_id)
await ws_manager.send_printer_status(
printer_id,
printer_state_to_dict(state, printer_id, printer_manager.get_model(printer_id)),
)
except Exception as e:
logger.warning("Failed to broadcast AMS change for printer %s: %s", printer_id, e)
from backend.app.utils.color_utils import colors_similar as _colors_similar
# Auto-unlink spool assignments with stale fingerprints
try:
async with async_session() as db:
from sqlalchemy.orm import selectinload
from backend.app.api.routes.inventory import _find_tray_in_ams_data
from backend.app.models.spool_assignment import SpoolAssignment as SA
result = await db.execute(select(SA).where(SA.printer_id == printer_id).options(selectinload(SA.spool)))
stale = []
for assignment in result.scalars().all():
# External spool assignments (ams_id=255) live in vt_tray, not AMS data
if assignment.ams_id == 255:
ps = printer_manager.get_status(printer_id)
vt_tray_raw = ps.raw_data.get("vt_tray", []) if ps else []
ext_id = assignment.tray_id + 254 # 0→254, 1→255
current_tray = None
for vt in vt_tray_raw:
if isinstance(vt, dict) and int(vt.get("id", 254)) == ext_id:
current_tray = vt
break
if not current_tray:
# vt_tray data may not have arrived yet — keep assignment
continue
else:
current_tray = _find_tray_in_ams_data(ams_data, assignment.ams_id, assignment.tray_id)
if not current_tray:
logger.info(
"Auto-unlink: spool %d AMS%d-T%d — tray not found in AMS data (slot empty?)",
assignment.spool_id,
assignment.ams_id,
assignment.tray_id,
)
stale.append(assignment) # Slot empty
elif _is_bambu_uuid(current_tray.get("tray_uuid", "")):
# A Bambu Lab spool is in this slot — check if it's the same spool
# that's currently assigned. If yes, keep the assignment (avoids
# unnecessary unlink/re-assign/ams_filament_setting cycle that clears
# the printer's filament preset on every startup).
tray_uuid = current_tray.get("tray_uuid", "")
tag_uid = current_tray.get("tag_uid", "")
spool = assignment.spool
spool_matches = False
if spool:
if (spool.tray_uuid and spool.tray_uuid.upper() == tray_uuid.upper()) or (
spool.tag_uid
and tag_uid
and tag_uid != "0000000000000000"
and spool.tag_uid.upper() == tag_uid.upper()
):
spool_matches = True
if spool_matches:
# Same BL spool still in slot — keep assignment, update fingerprint if needed
cur_color = current_tray.get("tray_color", "")
cur_type = current_tray.get("tray_type", "")
fp_color = assignment.fingerprint_color or ""
fp_type = assignment.fingerprint_type or ""
if cur_color.upper() != fp_color.upper() or cur_type.upper() != fp_type.upper():
assignment.fingerprint_color = cur_color
assignment.fingerprint_type = cur_type
logger.debug(
"Auto-unlink: spool %d AMS%d-T%d — same BL spool, updated fingerprint",
assignment.spool_id,
assignment.ams_id,
assignment.tray_id,
)
continue
# Different BL spool or unrecognized — unlink so auto-assign can match
logger.info(
"Auto-unlink: spool %d AMS%d-T%d — different Bambu Lab spool detected (uuid=%s)",
assignment.spool_id,
assignment.ams_id,
assignment.tray_id,
tray_uuid,
)
stale.append(assignment)
else:
cur_color = current_tray.get("tray_color", "")
cur_type = current_tray.get("tray_type", "")
fp_color = assignment.fingerprint_color or ""
fp_type = assignment.fingerprint_type or ""
if not _colors_similar(cur_color, fp_color) or cur_type.upper() != fp_type.upper():
# Fingerprint mismatch — but check if tray now matches the
# assigned spool (e.g. auto-configure changed the tray).
spool = assignment.spool
if spool:
spool_color = (spool.rgba or "FFFFFFFF").upper()
spool_type = (spool.material or "").upper()
if _colors_similar(cur_color, spool_color) and cur_type.upper() == spool_type:
# Tray was reconfigured to match the spool — update fingerprint
logger.info(
"Auto-unlink: spool %d AMS%d-T%d — fingerprint mismatch but tray matches spool, updating fp",
assignment.spool_id,
assignment.ams_id,
assignment.tray_id,
)
assignment.fingerprint_color = cur_color
assignment.fingerprint_type = cur_type
continue
logger.info(
"Auto-unlink: spool %d AMS%d-T%d — fingerprint mismatch (cur=%s/%s fp=%s/%s spool=%s/%s)",
assignment.spool_id,
assignment.ams_id,
assignment.tray_id,
cur_color,
cur_type,
fp_color,
fp_type,
spool.rgba if spool else "?",
spool.material if spool else "?",
)
stale.append(assignment) # Spool changed
for a in stale:
await db.delete(a)
if stale:
logger.info("Auto-unlinked %d stale spool assignments for printer %d", len(stale), printer_id)
# Commit any changes (stale deletions and/or fingerprint updates)
await db.commit()
except Exception as e:
logger.warning("Spool assignment cleanup failed: %s", e, exc_info=True)
# Auto-manage inventory spools from AMS tray data (skip if Spoolman manages AMS)
try:
async with async_session() as db:
from backend.app.api.routes.settings import get_setting
from backend.app.models.spool_assignment import SpoolAssignment as SA
from backend.app.services.spool_tag_matcher import (
auto_assign_spool,
create_spool_from_tray,
get_spool_by_tag,
is_bambu_tag,
is_valid_tag,
)
_spoolman_on = await get_setting(db, "spoolman_enabled")
if not _spoolman_on or _spoolman_on.lower() != "true":
for ams_unit in ams_data:
if not isinstance(ams_unit, dict):
continue
ams_id = int(ams_unit.get("id", 0))
for tray in ams_unit.get("tray", []):
if not isinstance(tray, dict):
continue
tray_id = int(tray.get("id", 0))
tag_uid = tray.get("tag_uid", "")
tray_uuid = tray.get("tray_uuid", "")
tray_info_idx = tray.get("tray_info_idx", "")
if not tray.get("tray_type"):
continue # Empty slot
# Check if assignment already exists for this slot
existing = await db.execute(
select(SA)
.options(selectinload(SA.spool))
.where(SA.printer_id == printer_id, SA.ams_id == ams_id, SA.tray_id == tray_id)
)
existing_assignment = existing.scalar_one_or_none()
if existing_assignment:
# Sync spool weight_used from AMS remain — only INCREASE, never decrease.
# The AMS remain% is low-resolution (integer %, i.e. 10g steps for 1kg spool)
# and must not overwrite precise values from the usage tracker (3MF/G-code).
remain_raw = tray.get("remain")
if (
remain_raw is not None
and existing_assignment.spool
and not existing_assignment.spool.weight_locked
):
try:
remain_val = int(remain_raw)
except (TypeError, ValueError):
remain_val = -1
if 1 <= remain_val <= 100:
lw = existing_assignment.spool.label_weight or 1000
new_used = round(lw * (100 - remain_val) / 100.0, 1)
current_used = existing_assignment.spool.weight_used or 0
if new_used > current_used + 1:
logger.info(
"Weight sync: spool %d weight_used %s -> %s (remain=%d)",
existing_assignment.spool_id,
current_used,
new_used,
remain_val,
)
existing_assignment.spool.weight_used = new_used
await db.commit()
continue
if is_bambu_tag(tag_uid, tray_uuid, tray_info_idx):
# BL spool with RFID tag: auto-match or auto-create
spool = await get_spool_by_tag(db, tag_uid, tray_uuid)
if not spool:
spool = await create_spool_from_tray(db, tray)
await auto_assign_spool(
printer_id,
ams_id,
tray_id,
spool,
printer_manager,
db,
tray_info_idx=tray_info_idx,
)
await db.commit()
await ws_manager.broadcast(
{
"type": "spool_auto_assigned",
"printer_id": printer_id,
"ams_id": ams_id,
"tray_id": tray_id,
"spool_id": spool.id,
}
)
logger.info(
"RFID auto-assigned spool %d to printer %d AMS%d-T%d",
spool.id,
printer_id,
ams_id,
tray_id,
)
elif is_valid_tag(tag_uid, tray_uuid):
# Non-BL spool with some tag — let user choose
await ws_manager.broadcast(
{
"type": "unknown_tag",
"printer_id": printer_id,
"ams_id": ams_id,
"tray_id": tray_id,
"tag_uid": tag_uid,
"tray_uuid": tray_uuid,
}
)
else:
# No tag at all — let user choose from inventory
await ws_manager.broadcast(
{
"type": "unknown_tag",
"printer_id": printer_id,
"ams_id": ams_id,
"tray_id": tray_id,
"tag_uid": "",
"tray_uuid": "",
}
)
except Exception as e:
logger.warning("RFID spool auto-assign failed: %s", e, exc_info=True)
try:
async with async_session() as db:
from backend.app.api.routes.settings import get_setting
from backend.app.models.printer import Printer
# Check if Spoolman is enabled
spoolman_enabled = await get_setting(db, "spoolman_enabled")
if not spoolman_enabled or spoolman_enabled.lower() != "true":
return
# Check sync mode
sync_mode = await get_setting(db, "spoolman_sync_mode")
if sync_mode and sync_mode != "auto":
return # Only sync on auto mode
# Check if weight sync is disabled
disable_weight_sync_str = await get_setting(db, "spoolman_disable_weight_sync")
disable_weight_sync = disable_weight_sync_str and disable_weight_sync_str.lower() == "true"
# Get Spoolman URL
spoolman_url = await get_setting(db, "spoolman_url")
if not spoolman_url:
return
# Get or create Spoolman client
client = await get_spoolman_client()
if not client:
client = await init_spoolman_client(spoolman_url)
# Check if Spoolman is reachable
if not await client.health_check():
logger.warning("Spoolman not reachable at %s", spoolman_url)
return
# Get printer name for location
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
printer_name = printer.name if printer else f"Printer {printer_id}"
# OPTIMIZATION: Fetch all spools once before processing trays
# This eliminates redundant API calls (one per tray) when syncing multiple trays
logger.debug("[Printer %s] Fetching spools cache for AMS sync...", printer_id)
try:
cached_spools = await client.get_spools()
logger.debug("[Printer %s] Cached %d spools for batch sync", printer_id, len(cached_spools))
except Exception as e:
logger.error(
"[Printer %s] Failed to fetch spools cache after retries, aborting AMS sync: %s",
printer_id,
e,
)
return
# Load inventory weights as fallback (when AMS MQTT data lacks remain values)
from sqlalchemy.orm import selectinload
from backend.app.models.spool_assignment import SpoolAssignment
inventory_weights: dict[tuple[int, int], float] = {}
try:
assign_result = await db.execute(
select(SpoolAssignment)
.options(selectinload(SpoolAssignment.spool))
.where(SpoolAssignment.printer_id == printer_id)
)
for assignment in assign_result.scalars().all():
spool = assignment.spool
if spool and spool.label_weight > 0:
remaining = max(0.0, spool.label_weight - (spool.weight_used or 0))
inventory_weights[(assignment.ams_id, assignment.tray_id)] = remaining
except Exception as e:
logger.debug("Could not load inventory weights for printer %s: %s", printer_id, e)
# Sync each AMS tray
synced = 0
for ams_unit in ams_data:
ams_id = int(ams_unit.get("id", 0))
trays = ams_unit.get("tray", [])
for tray_data in trays:
tray = client.parse_ams_tray(ams_id, tray_data)
if not tray:
continue # Empty tray
try:
inv_remaining = inventory_weights.get((ams_id, tray.tray_id))
result = await client.sync_ams_tray(
tray,
printer_name,
disable_weight_sync=disable_weight_sync,
cached_spools=cached_spools,
inventory_remaining=inv_remaining,
)
if result:
synced += 1
# If a new spool was created, add it to the cache
# so subsequent trays can find it if they reference the same tag
if result.get("id"):
# Check if this spool already exists in cache
spool_exists = any(s.get("id") == result["id"] for s in cached_spools)
if not spool_exists:
cached_spools.append(result)
logger.debug(
"[Printer %s] Added newly created spool %s to cache",
printer_id,
result["id"],
)
except Exception as e:
logger.error("Error syncing AMS %s tray %s: %s", ams_id, tray.tray_id, e)
if synced > 0:
logger.info("Auto-synced %s AMS trays to Spoolman for printer %s", synced, printer_id)
except Exception as e:
logging.getLogger(__name__).warning(f"Spoolman AMS sync failed: {e}")
async def _capture_snapshot_for_notification(printer_id: int, printer, logger) -> bytes | None:
"""Capture a camera snapshot for notification image attachment.
Returns JPEG bytes (max 2.5MB) or None if capture fails or is unavailable.
Uses: external camera > buffered frame > fresh capture.
"""
if not printer:
return None
try:
from backend.app.api.routes.settings import get_setting
async with async_session() as db:
capture_enabled = await get_setting(db, "capture_finish_photo")
if capture_enabled is not None and capture_enabled.lower() != "true":
return None
# Try external camera first
if printer.external_camera_enabled and printer.external_camera_url:
logger.info("[SNAPSHOT] Capturing from external camera for printer %s", printer_id)
from backend.app.services.external_camera import capture_frame
frame_data = await capture_frame(printer.external_camera_url, printer.external_camera_type or "mjpeg")
if frame_data and len(frame_data) <= 2_500_000:
logger.info("[SNAPSHOT] External camera frame: %s bytes", len(frame_data))
return _apply_camera_rotation(frame_data, printer, logger)
# Try buffered frame from active stream
from backend.app.api.routes.camera import _active_chamber_streams, _active_streams, get_buffered_frame
active_for_printer = [k for k in _active_streams if k.startswith(f"{printer_id}-")]
active_chamber = [k for k in _active_chamber_streams if k.startswith(f"{printer_id}-")]
buffered_frame = get_buffered_frame(printer_id)
if (active_for_printer or active_chamber) and buffered_frame:
logger.info("[SNAPSHOT] Using buffered frame for printer %s: %s bytes", printer_id, len(buffered_frame))
if len(buffered_frame) <= 2_500_000:
return _apply_camera_rotation(buffered_frame, printer, logger)
# Fresh capture from printer camera
logger.info("[SNAPSHOT] Capturing fresh frame for printer %s", printer_id)
from backend.app.services.camera import capture_camera_frame_bytes
frame_data = await capture_camera_frame_bytes(
printer.ip_address, printer.access_code, printer.model, timeout=15
)
if frame_data and len(frame_data) <= 2_500_000:
logger.info("[SNAPSHOT] Fresh camera frame: %s bytes", len(frame_data))
return _apply_camera_rotation(frame_data, printer, logger)
except Exception as e:
logger.warning("[SNAPSHOT] Failed to capture snapshot for printer %s: %s", printer_id, e)
return None
def _apply_camera_rotation(image_data: bytes, printer, logger) -> bytes:
"""Apply camera rotation to snapshot image if configured."""
rotation = getattr(printer, "camera_rotation", 0)
if not rotation or rotation == 0:
return image_data
try:
from io import BytesIO
from PIL import Image
img = Image.open(BytesIO(image_data))
# PIL rotate is counter-clockwise, so negate for clockwise rotation
img = img.rotate(-rotation, expand=True)
buf = BytesIO()
img.save(buf, format="JPEG", quality=90)
rotated = buf.getvalue()
logger.info("[SNAPSHOT] Applied %d° rotation: %s → %s bytes", rotation, len(image_data), len(rotated))
return rotated
except Exception as e:
logger.warning("[SNAPSHOT] Failed to apply rotation: %s", e)
return image_data
async def _send_print_start_notification(
printer_id: int,
data: dict,
archive_data: dict | None = None,
logger=None,
):
"""Helper to send print start notification with optional archive data."""
if logger is None:
logger = logging.getLogger(__name__)
try:
async with async_session() as db:
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
printer_name = printer.name if printer else f"Printer {printer_id}"
# Capture camera snapshot for notification image attachment
image_data = await _capture_snapshot_for_notification(printer_id, printer, logger)
if image_data:
if archive_data is None:
archive_data = {}
archive_data["image_data"] = image_data
await notification_service.on_print_start(printer_id, printer_name, data, db, archive_data=archive_data)
# Send user-specific email notification for print start
if archive_data and archive_data.get("created_by_id"):
await notification_service.send_user_print_email(
event_type="user_print_start",
created_by_id=archive_data["created_by_id"],
printer_name=printer_name,
filename=data.get("subtask_name") or data.get("filename", "Unknown"),
db=db,
)
except Exception as e:
logger.warning("Notification on_print_start failed: %s", e)
async def _dispatch_user_print_email(
status: str,
created_by_id: int | None,
printer_name: str,
filename: str,
db,
) -> None:
"""Send a user-specific print-completion email based on print status.
Maps the normalised print status to the correct event type and delegates
to :meth:`NotificationService.send_user_print_email`. A single helper
avoids duplicating the ``if status == "completed" / elif "failed" / elif
"stopped"`` dispatch block at every call site.
Does nothing if *created_by_id* is ``None``.
"""
if created_by_id is None:
return
if status == "completed":
event_type = "user_print_complete"
elif status == "failed":
event_type = "user_print_failed"
elif status in ("stopped", "aborted", "cancelled"):
event_type = "user_print_stopped"
else:
return
await notification_service.send_user_print_email(
event_type=event_type,
created_by_id=created_by_id,
printer_name=printer_name,
filename=filename,
db=db,
)
def _load_objects_from_archive(archive, printer_id: int, logger) -> None:
"""Extract printable objects from an archive's 3MF file and store in printer state."""
try:
from backend.app.services.archive import extract_printable_objects_from_3mf
file_path = app_settings.base_dir / archive.file_path
if file_path.is_file() and str(file_path).endswith(".3mf"):
with open(file_path, "rb") as f:
threemf_data = f.read()
# Extract with positions for UI overlay
printable_objects, bbox_all = extract_printable_objects_from_3mf(threemf_data, include_positions=True)
if printable_objects:
client = printer_manager.get_client(printer_id)
if client:
client.state.printable_objects = printable_objects
client.state.printable_objects_bbox_all = bbox_all
client.state.skipped_objects = []
logger.info("Loaded %s printable objects for printer %s", len(printable_objects), printer_id)
except Exception as e:
logger.debug("Failed to extract printable objects from archive: %s", e)
async def on_print_start(printer_id: int, data: dict):
"""Handle print start - archive the 3MF file immediately."""
logger = logging.getLogger(__name__)
logger.info("[CALLBACK] on_print_start called for printer %s, data keys: %s", printer_id, list(data.keys()))
# Clear any stale user-stopped flag from previous print cycles
_user_stopped_printers.discard(printer_id)
# Cancel any active bed cooldown task for this printer
existing_task = _bed_cooldown_tasks.pop(printer_id, None)
if existing_task and not existing_task.done():
existing_task.cancel()
logger.info("[BED-COOL] Cancelled bed cooldown monitor for printer %s (new print started)", printer_id)
# Clear cached cover images so the new print's thumbnail is fetched fresh
from backend.app.api.routes.printers import clear_cover_cache
clear_cover_cache(printer_id)
await ws_manager.send_print_start(printer_id, data)
# MQTT relay - publish print start
try:
printer_info = printer_manager.get_printer(printer_id)
if printer_info:
await mqtt_relay.on_print_start(
printer_id,
printer_info.name,
printer_info.serial_number,
data.get("filename", ""),
data.get("subtask_name", ""),
)
except Exception:
pass # Don't fail print start callback if MQTT fails
# Capture AMS tray remain% for filament consumption tracking (skip if Spoolman handles usage)
try:
async with async_session() as db:
from backend.app.api.routes.settings import get_setting
_spoolman_on = await get_setting(db, "spoolman_enabled")
if not _spoolman_on or _spoolman_on.lower() != "true":
from backend.app.services.usage_tracker import on_print_start as usage_on_print_start
await usage_on_print_start(printer_id, data, printer_manager, db=db)
except Exception as e:
logger.warning("Usage tracker on_print_start failed: %s", e)
# Track if notification was sent (to avoid sending twice)
notification_sent = False
# Smart plug automation: turn on plug when print starts
try:
async with async_session() as db:
await smart_plug_manager.on_print_start(printer_id, db)
except Exception as e:
logger.warning("Smart plug on_print_start failed: %s", e)
async with async_session() as db:
from backend.app.models.printer import Printer
from backend.app.services.bambu_ftp import list_files_async
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
# Plate detection check - pause if objects detected on build plate
logger.info(
f"[PLATE CHECK] printer_id={printer_id}, plate_detection_enabled={printer.plate_detection_enabled if printer else 'NO PRINTER'}"
)
if printer and printer.plate_detection_enabled:
logger.info("[PLATE CHECK] ENTERING plate detection code for printer %s", printer_id)
try:
from backend.app.services.plate_detection import check_plate_empty
# Build ROI tuple from printer settings if available
roi = None
if all(
[
printer.plate_detection_roi_x is not None,
printer.plate_detection_roi_y is not None,
printer.plate_detection_roi_w is not None,
printer.plate_detection_roi_h is not None,
]
):
roi = (
printer.plate_detection_roi_x,
printer.plate_detection_roi_y,
printer.plate_detection_roi_w,
printer.plate_detection_roi_h,
)
# Auto-turn on chamber light if it's off for better detection
light_was_off = False
client = printer_manager.get_client(printer_id)
if client and client.state:
light_was_off = not client.state.chamber_light
if light_was_off:
logger.info("[PLATE CHECK] Turning on chamber light for printer %s", printer_id)
client.set_chamber_light(True)
# Wait for light to physically turn on and camera to adjust exposure
await asyncio.sleep(2.5)
logger.info("[PLATE CHECK] Running plate detection for printer %s", printer_id)
plate_result = await check_plate_empty(
printer_id=printer_id,
ip_address=printer.ip_address,
access_code=printer.access_code,
model=printer.model,
include_debug_image=False,
external_camera_url=printer.external_camera_url,
external_camera_type=printer.external_camera_type,
use_external=printer.external_camera_enabled,
roi=roi,
)
# Restore chamber light to original state
if light_was_off and client:
logger.info("[PLATE CHECK] Restoring chamber light to off for printer %s", printer_id)
client.set_chamber_light(False)
if not plate_result.needs_calibration and not plate_result.is_empty:
# Objects detected - pause the print!
logger.warning(
f"[PLATE CHECK] Objects detected on plate for printer {printer_id}! "
f"Confidence: {plate_result.confidence:.0%}, Diff: {plate_result.difference_percent:.1f}%"
)
client = printer_manager.get_client(printer_id)
if client:
client.pause_print()
logger.info("[PLATE CHECK] Print paused for printer %s", printer_id)
# Send notification about plate not empty
await ws_manager.broadcast(
{
"type": "plate_not_empty",
"printer_id": printer_id,
"printer_name": printer.name,
"message": f"Objects detected on build plate! Print paused. (Diff: {plate_result.difference_percent:.1f}%)",
}
)
# Also send push notification
try:
await notification_service.on_plate_not_empty(
printer_id=printer_id,
printer_name=printer.name,
db=db,
difference_percent=plate_result.difference_percent,
)
except Exception as notif_err:
logger.warning("[PLATE CHECK] Failed to send notification: %s", notif_err)
else:
logger.info("[PLATE CHECK] Plate is empty for printer %s, proceeding with print", printer_id)
except Exception as plate_err:
# Don't block print on plate detection errors
logger.warning("[PLATE CHECK] Plate detection failed for printer %s: %s", printer_id, plate_err)
if not printer or not printer.auto_archive:
# Send notification without archive data (auto-archive disabled)
logger.info(
f"[CALLBACK] Skipping archive - printer: {printer is not None}, auto_archive: {printer.auto_archive if printer else 'N/A'}"
)
if not notification_sent:
# Even with auto-archive disabled, try to recover created_by_id from
# a registered expected print (e.g. a library-file queue item) so the
# user start email can still be sent.
_fn = data.get("filename", "")
_sn = data.get("subtask_name", "")
_no_archive_creator_keys: list[tuple[int, str]] = []
if _sn:
_no_archive_creator_keys += [
(printer_id, _sn),
(printer_id, f"{_sn}.3mf"),
(printer_id, f"{_sn}.gcode.3mf"),
]
if _fn:
_base_fn = _fn.split("/")[-1] if "/" in _fn else _fn
_no_archive_creator_keys.append((printer_id, _base_fn))
_no_archive_base = _base_fn.replace(".gcode", "").replace(".3mf", "")
_no_archive_creator_keys += [
(printer_id, _no_archive_base),
(printer_id, f"{_no_archive_base}.3mf"),
]
_no_archive_creator: int | None = None
for _key in _no_archive_creator_keys:
# Clean up all dicts for every key to avoid memory leaks
_expected_prints.pop(_key, None)
_expected_print_registered_at.pop(_key, None)
popped_creator = _expected_print_creators.pop(_key, None)
if _no_archive_creator is None:
_no_archive_creator = popped_creator
_creator_data = {"created_by_id": _no_archive_creator} if _no_archive_creator else None
await _send_print_start_notification(printer_id, data, _creator_data, logger)
return
# Get the filename and subtask_name
filename = data.get("filename", "")
subtask_name = data.get("subtask_name", "")
logger.info("[CALLBACK] Print start detected - filename: %s, subtask: %s", filename, subtask_name)
# Skip calibration prints — internal printer files should not be archived
# Bambu calibration gcode lives under /usr/ (e.g. /usr/etc/print/auto_cali_for_user.gcode)
if filename and filename.startswith("/usr/"):
logger.info("[CALLBACK] Skipping archive — internal printer file detected: %s", filename)
if not notification_sent:
await _send_print_start_notification(printer_id, data, logger=logger)
return
if not filename and not subtask_name:
# Send notification without archive data (no filename)
logger.info("[CALLBACK] Skipping archive - no filename or subtask_name")
if not notification_sent:
await _send_print_start_notification(printer_id, data, logger=logger)
return
# Check if this is an expected print from reprint/scheduled
# Build list of possible keys to check
expected_keys = []
if subtask_name:
expected_keys.append((printer_id, subtask_name))
expected_keys.append((printer_id, f"{subtask_name}.3mf"))
expected_keys.append((printer_id, f"{subtask_name}.gcode.3mf"))
if filename:
fname = filename.split("/")[-1] if "/" in filename else filename
expected_keys.append((printer_id, fname))
# Strip extensions to match
base = fname.replace(".gcode", "").replace(".3mf", "")
expected_keys.append((printer_id, base))
expected_keys.append((printer_id, f"{base}.3mf"))
expected_archive_id = None
for key in expected_keys:
expected_archive_id = _expected_prints.pop(key, None)
_expected_print_registered_at.pop(key, None)
if expected_archive_id:
# Clean up other possible keys for this print
for other_key in expected_keys:
_expected_prints.pop(other_key, None)
_expected_print_registered_at.pop(other_key, None)
break
if expected_archive_id:
# This is a reprint/scheduled print - use existing archive, don't create new one
logger.info("Using expected archive %s for print (skipping duplicate)", expected_archive_id)
from backend.app.models.archive import PrintArchive
result = await db.execute(select(PrintArchive).where(PrintArchive.id == expected_archive_id))
archive = result.scalar_one_or_none()
if archive:
# Update archive status to printing
archive.status = "printing"
archive.started_at = datetime.now(timezone.utc)
await db.commit()
# Track as active print
_active_prints[(printer_id, archive.filename)] = archive.id
if subtask_name:
_active_prints[(printer_id, f"{subtask_name}.3mf")] = archive.id
# Set up energy tracking
try:
plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
plug = plug_result.scalar_one_or_none()
logger.info(
f"[ENERGY] Print start - archive {archive.id}, printer {printer_id}, plug found: {plug is not None}"
)
if plug:
energy = await _get_plug_energy(plug, db)
logger.info("[ENERGY] Energy response from plug: %s", energy)
if energy and energy.get("total") is not None:
_print_energy_start[archive.id] = energy["total"]
logger.info(
f"[ENERGY] Recorded starting energy for archive {archive.id}: {energy['total']} kWh"
)
else:
logger.warning("[ENERGY] No 'total' in energy response for archive %s", archive.id)
else:
logger.info("[ENERGY] No smart plug found for printer %s", printer_id)
except Exception as e:
logger.warning("Failed to record starting energy: %s", e)
await ws_manager.send_archive_updated(
{
"id": archive.id,
"status": "printing",
}
)
# Send notification with archive data (reprint/scheduled)
if not notification_sent:
# Use archive's created_by_id; fall back to the creator registered via
# register_expected_print (handles library-file-based queue items where
# the freshly-created archive has no created_by_id yet).
# Pop ALL matching keys so no stale entries remain in the dict.
fallback_creator = None
for key in expected_keys:
popped = _expected_print_creators.pop(key, None)
if fallback_creator is None:
fallback_creator = popped
archive_data = {
"print_time_seconds": archive.print_time_seconds,
"created_by_id": archive.created_by_id or fallback_creator,
}
await _send_print_start_notification(printer_id, data, archive_data, logger)
# Extract printable objects from the archived 3MF file
_load_objects_from_archive(archive, printer_id, logger)
# Store Spoolman tracking data for per-filament usage reporting
try:
await _store_spoolman_print_data(
printer_id,
archive.id,
archive.file_path,
db,
printer_manager,
ams_mapping=_get_start_ams_mapping(data, archive.id),
)
except Exception as e:
logger.warning("[SPOOLMAN] Failed to store tracking data: %s", e)
return # Skip creating a new archive
# Check if there's already a "printing" archive for this printer/file
# This prevents duplicates when backend restarts during an active print
from backend.app.models.archive import PrintArchive
check_name = subtask_name or filename.split("/")[-1].replace(".gcode", "").replace(".3mf", "")
existing = await db.execute(
select(PrintArchive)
.where(PrintArchive.printer_id == printer_id)
.where(PrintArchive.status == "printing")
.where(
or_(
PrintArchive.print_name == check_name,
PrintArchive.filename.in_(
[
f"{check_name}.3mf",
f"{check_name}.gcode.3mf",
]
),
)
)
.order_by(PrintArchive.created_at.desc())
.limit(1)
)
existing_archive = existing.scalar_one_or_none()
if existing_archive:
# Check if archive is stale (older than 4 hours) - likely a failed/cancelled print
# that didn't get properly updated
archive_age = datetime.now(timezone.utc) - existing_archive.created_at.replace(tzinfo=timezone.utc)
if archive_age.total_seconds() > 4 * 60 * 60: # 4 hours
logger.warning(
f"Found stale 'printing' archive {existing_archive.id} (age: {archive_age}), "
f"marking as cancelled and creating new archive"
)
existing_archive.status = "cancelled"
existing_archive.failure_reason = "Stale - print likely cancelled or failed without status update"
await db.commit()
# Fall through to create new archive (don't return)
_existing_archive = None # Clear so we don't use stale archive
else:
logger.info(
f"Skipping duplicate - already have printing archive {existing_archive.id} for {check_name}"
)
# Track this as the active print
_active_prints[(printer_id, existing_archive.filename)] = existing_archive.id
# Also set up energy tracking if not already tracked
if existing_archive.id not in _print_energy_start:
try:
plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
plug = plug_result.scalar_one_or_none()
if plug:
energy = await _get_plug_energy(plug, db)
if energy and energy.get("total") is not None:
_print_energy_start[existing_archive.id] = energy["total"]
logger.info(
f"Recorded starting energy for existing archive {existing_archive.id}: {energy['total']} kWh"
)
except Exception as e:
logger.warning("Failed to record starting energy for existing archive: %s", e)
# Send notification with archive data (existing archive)
if not notification_sent:
archive_data = {
"print_time_seconds": existing_archive.print_time_seconds,
"created_by_id": existing_archive.created_by_id,
}
await _send_print_start_notification(printer_id, data, archive_data, logger)
# Extract printable objects from the archived 3MF file
_load_objects_from_archive(existing_archive, printer_id, logger)
return
# Build list of possible 3MF filenames to try
possible_names = []
# Bambu printers typically store files as "Name.gcode.3mf"
# The subtask_name is usually the best source for the filename
if subtask_name:
# Try common Bambu naming patterns
possible_names.append(f"{subtask_name}.gcode.3mf")
possible_names.append(f"{subtask_name}.3mf")
# Try original filename with .3mf extension
if filename:
# Extract just the filename part, not the full path
fname = filename.split("/")[-1] if "/" in filename else filename
if fname.endswith(".3mf"):
possible_names.append(fname)
elif fname.endswith(".gcode"):
base = fname.rsplit(".", 1)[0]
possible_names.append(f"{base}.gcode.3mf")
possible_names.append(f"{base}.3mf")
else:
possible_names.append(f"{fname}.gcode.3mf")
possible_names.append(f"{fname}.3mf")
# Also try with spaces converted to underscores (Bambu Studio may normalize filenames)
space_variants = []
for name in possible_names:
if " " in name:
space_variants.append(name.replace(" ", "_"))
possible_names.extend(space_variants)
# Remove duplicates while preserving order
seen = set()
possible_names = [x for x in possible_names if not (x in seen or seen.add(x))]
logger.info("Trying filenames: %s", possible_names)
# Try to find and download the 3MF file
temp_path = None
downloaded_filename = None
# Get FTP retry settings
ftp_retry_enabled, ftp_retry_count, ftp_retry_delay, ftp_timeout = await get_ftp_retry_settings()
for try_filename in possible_names:
if not try_filename.endswith(".3mf"):
continue
remote_paths = [
f"/cache/{try_filename}",
f"/model/{try_filename}",
f"/data/{try_filename}",
f"/data/Metadata/{try_filename}",
f"/{try_filename}",
]
temp_path = app_settings.archive_dir / "temp" / try_filename
temp_path.parent.mkdir(parents=True, exist_ok=True)
for remote_path in remote_paths:
logger.debug("Trying FTP download: %s", remote_path)
try:
if ftp_retry_enabled:
downloaded = await with_ftp_retry(
download_file_async,
printer.ip_address,
printer.access_code,
remote_path,
temp_path,
socket_timeout=ftp_timeout,
printer_model=printer.model,
max_retries=ftp_retry_count,
retry_delay=ftp_retry_delay,
operation_name=f"Download 3MF from {remote_path}",
)
else:
downloaded = await download_file_async(
printer.ip_address,
printer.access_code,
remote_path,
temp_path,
socket_timeout=ftp_timeout,
printer_model=printer.model,
)
if downloaded:
downloaded_filename = try_filename
logger.info("Downloaded: %s", remote_path)
break
except Exception as e:
logger.debug("FTP download failed for %s: %s", remote_path, e)
if downloaded_filename:
break
# If still not found, try listing directories to find matching file
# Different printer models use different directory structures
if not downloaded_filename and (filename or subtask_name):
search_term = (subtask_name or filename).lower().replace(".gcode", "").replace(".3mf", "")
logger.info("Direct FTP download failed, searching directories for '%s'", search_term)
search_dirs = ["/cache", "/model", "/data", "/data/Metadata", "/"]
for search_dir in search_dirs:
if downloaded_filename:
break
try:
dir_files = await list_files_async(
printer.ip_address, printer.access_code, search_dir, printer_model=printer.model
)
threemf_files = [f.get("name") for f in dir_files if f.get("name", "").endswith(".3mf")]
if threemf_files:
logger.info(
f"Found {len(threemf_files)} 3MF files in {search_dir}: {threemf_files[:5]}{'...' if len(threemf_files) > 5 else ''}"
)
for f in dir_files:
if f.get("is_directory"):
continue
fname = f.get("name", "")
# Normalize both for comparison (spaces and underscores are equivalent)
fname_normalized = fname.lower().replace(" ", "_")
search_normalized = search_term.replace(" ", "_")
if fname.endswith(".3mf") and search_normalized in fname_normalized:
logger.info("Found matching file in %s: %s", search_dir, fname)
temp_path = app_settings.archive_dir / "temp" / fname
temp_path.parent.mkdir(parents=True, exist_ok=True)
if ftp_retry_enabled:
downloaded = await with_ftp_retry(
download_file_async,
printer.ip_address,
printer.access_code,
f"{search_dir}/{fname}",
temp_path,
socket_timeout=ftp_timeout,
printer_model=printer.model,
max_retries=ftp_retry_count,
retry_delay=ftp_retry_delay,
operation_name=f"Download 3MF from {search_dir}/{fname}",
)
else:
downloaded = await download_file_async(
printer.ip_address,
printer.access_code,
f"{search_dir}/{fname}",
temp_path,
socket_timeout=ftp_timeout,
printer_model=printer.model,
)
if downloaded:
downloaded_filename = fname
logger.info("Found and downloaded from %s: %s", search_dir, fname)
break
except Exception as e:
logger.debug("Failed to list %s: %s", search_dir, e)
if not downloaded_filename or not temp_path:
logger.warning("Could not find 3MF file for print: %s", filename or subtask_name)
# Create a fallback archive without 3MF data so the print is still tracked
# This commonly happens with P1S/A1 printers where FTP has file size limitations
try:
from backend.app.models.archive import PrintArchive
# Derive print name from subtask_name or filename
print_name = subtask_name or filename
if print_name:
# Clean up the name (remove extensions, path parts)
print_name = print_name.split("/")[-1]
print_name = print_name.replace(".gcode.3mf", "").replace(".gcode", "").replace(".3mf", "")
else:
print_name = "Unknown Print"
# Create minimal archive entry
fallback_archive = PrintArchive(
printer_id=printer_id,
filename=filename or f"{print_name}.3mf",
file_path="", # Empty - no 3MF file available
file_size=0,
print_name=print_name,
status="printing",
started_at=datetime.now(timezone.utc),
extra_data={"no_3mf_available": True, "original_subtask": subtask_name, "_print_data": data},
)
db.add(fallback_archive)
await db.commit()
await db.refresh(fallback_archive)
logger.info("Created fallback archive %s for %s (no 3MF available)", fallback_archive.id, print_name)
# Start timelapse session if external camera is enabled
if printer.external_camera_enabled and printer.external_camera_url:
from backend.app.services.layer_timelapse import start_session
start_session(
printer_id,
fallback_archive.id,
printer.external_camera_url,
printer.external_camera_type or "mjpeg",
)
logger.info("Started layer timelapse for printer %s, archive %s", printer_id, fallback_archive.id)
# Track as active print
_active_prints[(printer_id, fallback_archive.filename)] = fallback_archive.id
if filename:
_active_prints[(printer_id, filename)] = fallback_archive.id
if subtask_name:
_active_prints[(printer_id, f"{subtask_name}.3mf")] = fallback_archive.id
_active_prints[(printer_id, subtask_name)] = fallback_archive.id
# Record starting energy if smart plug available
try:
plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
plug = plug_result.scalar_one_or_none()
if plug:
energy = await _get_plug_energy(plug, db)
if energy and energy.get("total") is not None:
_print_energy_start[fallback_archive.id] = energy["total"]
logger.info(
f"[ENERGY] Recorded starting energy for fallback archive {fallback_archive.id}: {energy['total']} kWh"
)
except Exception as e:
logger.warning("Failed to record starting energy for fallback: %s", e)
# Send WebSocket notification
await ws_manager.send_archive_created(
{
"id": fallback_archive.id,
"printer_id": fallback_archive.printer_id,
"filename": fallback_archive.filename,
"print_name": fallback_archive.print_name,
"status": fallback_archive.status,
}
)
# MQTT relay - publish archive created
try:
await mqtt_relay.on_archive_created(
archive_id=fallback_archive.id,
print_name=fallback_archive.print_name,
printer_name=printer.name,
status=fallback_archive.status,
)
except Exception:
pass # Don't fail if MQTT fails
# Store Spoolman tracking data (may not work for fallback since no 3MF)
try:
await _store_spoolman_print_data(
printer_id,
fallback_archive.id,
fallback_archive.file_path,
db,
printer_manager,
ams_mapping=_get_start_ams_mapping(data, fallback_archive.id),
)
except Exception as e:
logger.debug("[SPOOLMAN] Could not store tracking for fallback archive: %s", e)
# Send notification without archive data (file not found)
if not notification_sent:
await _send_print_start_notification(printer_id, data, logger=logger)
return
except Exception as e:
logger.error("Failed to create fallback archive: %s", e)
# Send notification without archive data (file not found)
if not notification_sent:
await _send_print_start_notification(printer_id, data, logger=logger)
return
try:
# Archive the file with status "printing"
service = ArchiveService(db)
archive = await service.archive_print(
printer_id=printer_id,
source_file=temp_path,
print_data={**data, "status": "printing"},
)
if archive:
# Track this active print (use both original filename and downloaded filename)
_active_prints[(printer_id, downloaded_filename)] = archive.id
if filename and filename != downloaded_filename:
_active_prints[(printer_id, filename)] = archive.id
if subtask_name:
_active_prints[(printer_id, f"{subtask_name}.3mf")] = archive.id
logger.info("Created archive %s for %s", archive.id, downloaded_filename)
# Start timelapse session if external camera is enabled
if printer.external_camera_enabled and printer.external_camera_url:
from backend.app.services.layer_timelapse import start_session
start_session(
printer_id,
archive.id,
printer.external_camera_url,
printer.external_camera_type or "mjpeg",
)
logger.info("Started layer timelapse for printer %s, archive %s", printer_id, archive.id)
# Record starting energy from smart plug if available
try:
plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
plug = plug_result.scalar_one_or_none()
logger.info(
f"[ENERGY] Auto-archive print start - archive {archive.id}, printer {printer_id}, plug found: {plug is not None}"
)
if plug:
energy = await _get_plug_energy(plug, db)
logger.info("[ENERGY] Auto-archive energy response: %s", energy)
if energy and energy.get("total") is not None:
_print_energy_start[archive.id] = energy["total"]
logger.info(
f"[ENERGY] Recorded starting energy for archive {archive.id}: {energy['total']} kWh"
)
else:
logger.warning("[ENERGY] No 'total' in energy response for archive %s", archive.id)
else:
logger.info("[ENERGY] No smart plug found for printer %s", printer_id)
except Exception as e:
logger.warning("Failed to record starting energy: %s", e)
await ws_manager.send_archive_created(
{
"id": archive.id,
"printer_id": archive.printer_id,
"filename": archive.filename,
"print_name": archive.print_name,
"status": archive.status,
}
)
# MQTT relay - publish archive created
try:
await mqtt_relay.on_archive_created(
archive_id=archive.id,
print_name=archive.print_name,
printer_name=printer.name,
status=archive.status,
)
except Exception:
pass # Don't fail if MQTT fails
# Send notification with archive data (new archive created)
if not notification_sent:
archive_data = {
"print_time_seconds": archive.print_time_seconds,
"created_by_id": archive.created_by_id,
}
await _send_print_start_notification(printer_id, data, archive_data, logger)
# Extract printable objects for skip object functionality
try:
from backend.app.services.archive import extract_printable_objects_from_3mf
with open(temp_path, "rb") as f:
threemf_data = f.read()
# Extract with positions for UI overlay
printable_objects, bbox_all = extract_printable_objects_from_3mf(
threemf_data, include_positions=True
)
if printable_objects:
# Store objects in printer state
client = printer_manager.get_client(printer_id)
if client:
client.state.printable_objects = printable_objects
client.state.printable_objects_bbox_all = bbox_all
client.state.skipped_objects = [] # Reset skipped objects for new print
logger.info(
"Loaded %s printable objects for printer %s", len(printable_objects), printer_id
)
except Exception as e:
logger.debug("Failed to extract printable objects: %s", e)
# Store Spoolman tracking data for per-filament usage reporting
try:
await _store_spoolman_print_data(
printer_id,
archive.id,
archive.file_path,
db,
printer_manager,
ams_mapping=_get_start_ams_mapping(data, archive.id),
)
except Exception as e:
logger.warning("[SPOOLMAN] Failed to store tracking data: %s", e)
# Capture timelapse file baseline for snapshot-diff on completion
try:
baseline_files, _ = await _list_timelapse_videos(printer)
_timelapse_baselines[printer_id] = {f.get("name", "") for f in baseline_files}
logger.info(
"[TIMELAPSE] Baseline at print start: %s video files for printer %s",
len(_timelapse_baselines[printer_id]),
printer_id,
)
except Exception as e:
logger.warning("[TIMELAPSE] Failed to capture baseline at print start: %s", e)
finally:
if temp_path and temp_path.exists():
temp_path.unlink()
_TIMELAPSE_VIDEO_EXTENSIONS = (".mp4", ".avi")
async def _list_timelapse_videos(printer) -> tuple[list[dict], str | None]:
"""List video files from printer's timelapse directory.
Finds MP4 (X1/A1 series) and AVI (P1 series) timelapse files.
Returns (video_files, found_path) where video_files is a list of file dicts
and found_path is the directory where they were found, or ([], None).
"""
from backend.app.services.bambu_ftp import list_files_async
logger = logging.getLogger(__name__)
for timelapse_path in ["/timelapse", "/timelapse/video", "/record", "/recording"]:
try:
found_files = await list_files_async(
printer.ip_address, printer.access_code, timelapse_path, printer_model=printer.model
)
if found_files:
video_files = [
f
for f in found_files
if not f.get("is_directory") and f.get("name", "").lower().endswith(_TIMELAPSE_VIDEO_EXTENSIONS)
]
if video_files:
return video_files, timelapse_path
except Exception as e:
logger.debug("[TIMELAPSE] Path %s failed: %s", timelapse_path, e)
continue
return [], None
async def _scan_for_timelapse_with_retries(archive_id: int, baseline_names: set[str] | None = None):
"""
Scan for timelapse with retries using a snapshot-diff approach.
Instead of picking the "most recent by mtime" (unreliable when the printer
clock is wrong in LAN-only mode), we snapshot existing MP4 filenames BEFORE
waiting, then look for any NEW filename that appears after each delay.
If baseline_names is provided (captured at print start), it is used directly.
Otherwise falls back to taking a baseline at completion time (best-effort
for prints started before app restart).
Falls back to name-matching (print name contained in MP4 filename) if no
new file appears after all retries.
"""
from pathlib import Path
logger = logging.getLogger(__name__)
# --- Phase 1: Take baseline snapshot of existing timelapse files ---
try:
async with async_session() as db:
from backend.app.models.printer import Printer
service = ArchiveService(db)
archive = await service.get_archive(archive_id)
if not archive:
logger.warning("[TIMELAPSE] Archive %s not found, aborting", archive_id)
return
if archive.timelapse_path:
logger.info("[TIMELAPSE] Archive %s already has timelapse attached", archive_id)
return
if not archive.printer_id:
logger.warning("[TIMELAPSE] Archive %s has no printer, aborting", archive_id)
return
if baseline_names is not None:
# Use pre-captured baseline from print start (no race condition)
logger.info(
"[TIMELAPSE] Using print-start baseline: %s existing video files for archive %s",
len(baseline_names),
archive_id,
)
else:
# Fallback: take baseline now (e.g. app restarted mid-print)
result = await db.execute(select(Printer).where(Printer.id == archive.printer_id))
printer = result.scalar_one_or_none()
if not printer:
logger.warning("[TIMELAPSE] Printer not found for archive %s, aborting", archive_id)
return
baseline_files, _ = await _list_timelapse_videos(printer)
baseline_names = {f.get("name", "") for f in baseline_files}
logger.info(
"[TIMELAPSE] Baseline snapshot (fallback): %s existing video files for archive %s",
len(baseline_names),
archive_id,
)
# Derive base_name for name-matching fallback
base_name = Path(archive.filename).stem if archive.filename else ""
if base_name.endswith(".gcode"):
base_name = base_name[:-6]
except Exception as e:
logger.warning("[TIMELAPSE] Failed to take baseline snapshot for archive %s: %s", archive_id, e)
return
# --- Phase 2: Retry loop — look for NEW files that weren't in baseline ---
retry_delays = [5, 10, 20, 30]
for attempt, delay in enumerate(retry_delays, 1):
logger.info(
"[TIMELAPSE] Attempt %s/%s: waiting %ss before scanning for archive %s",
attempt,
len(retry_delays),
delay,
archive_id,
)
await asyncio.sleep(delay)
try:
async with async_session() as db:
from backend.app.models.printer import Printer
from backend.app.services.bambu_ftp import download_file_bytes_async
service = ArchiveService(db)
archive = await service.get_archive(archive_id)
if not archive:
logger.warning("[TIMELAPSE] Archive %s not found, stopping retries", archive_id)
return
if archive.timelapse_path:
logger.info("[TIMELAPSE] Archive %s already has timelapse attached, stopping retries", archive_id)
return
result = await db.execute(select(Printer).where(Printer.id == archive.printer_id))
printer = result.scalar_one_or_none()
if not printer:
logger.warning("[TIMELAPSE] Printer not found for archive %s, stopping retries", archive_id)
return
video_files, found_path = await _list_timelapse_videos(printer)
if not video_files:
logger.info("[TIMELAPSE] Attempt %s: No video files found, will retry", attempt)
continue
logger.info("[TIMELAPSE] Attempt %s: Found %s video files in %s", attempt, len(video_files), found_path)
for f in video_files[:5]:
logger.info("[TIMELAPSE] - %s", f.get("name"))
# Find files that are NEW (not in baseline snapshot)
new_files = [f for f in video_files if f.get("name", "") not in baseline_names]
if new_files:
# Pick the first new file (there should typically be exactly one)
target = new_files[0]
file_name = target.get("name")
remote_path = target.get("path") or f"/timelapse/{file_name}"
logger.info(
"[TIMELAPSE] Attempt %s: New file detected: %s (downloading for archive %s)",
attempt,
file_name,
archive_id,
)
timelapse_data = await download_file_bytes_async(
printer.ip_address, printer.access_code, remote_path, printer_model=printer.model
)
if timelapse_data:
success = await service.attach_timelapse(archive_id, timelapse_data, file_name)
if success:
logger.info("[TIMELAPSE] Successfully attached timelapse to archive %s", archive_id)
await ws_manager.send_archive_updated({"id": archive_id, "timelapse_attached": True})
return
else:
logger.warning("[TIMELAPSE] Failed to attach timelapse to archive %s", archive_id)
else:
logger.warning("[TIMELAPSE] Attempt %s: Failed to download new file, will retry", attempt)
else:
logger.info("[TIMELAPSE] Attempt %s: No new files since baseline, will retry", attempt)
except Exception as e:
logger.warning("[TIMELAPSE] Attempt %s failed with error: %s", attempt, e)
# --- Phase 3: Fallback — try name matching against all files ---
if base_name:
logger.info("[TIMELAPSE] Retries exhausted, trying name-match fallback for '%s'", base_name)
try:
async with async_session() as db:
from backend.app.models.printer import Printer
from backend.app.services.bambu_ftp import download_file_bytes_async
service = ArchiveService(db)
archive = await service.get_archive(archive_id)
if not archive or archive.timelapse_path:
return
result = await db.execute(select(Printer).where(Printer.id == archive.printer_id))
printer = result.scalar_one_or_none()
if not printer:
return
video_files, found_path = await _list_timelapse_videos(printer)
for f in video_files:
fname = f.get("name", "")
if base_name.lower() in fname.lower():
remote_path = f.get("path") or f"/timelapse/{fname}"
logger.info("[TIMELAPSE] Name-match fallback: '%s' matches '%s'", base_name, fname)
timelapse_data = await download_file_bytes_async(
printer.ip_address, printer.access_code, remote_path, printer_model=printer.model
)
if timelapse_data:
success = await service.attach_timelapse(archive_id, timelapse_data, fname)
if success:
logger.info(
"[TIMELAPSE] Name-match fallback attached timelapse to archive %s", archive_id
)
await ws_manager.send_archive_updated({"id": archive_id, "timelapse_attached": True})
return
break # Only try the first name match
except Exception as e:
logger.warning("[TIMELAPSE] Name-match fallback failed: %s", e)
logger.warning("[TIMELAPSE] All attempts exhausted for archive %s, giving up", archive_id)
async def on_print_complete(printer_id: int, data: dict):
"""Handle print completion - update the archive status."""
import time
logger = logging.getLogger(__name__)
start_time = time.time()
def log_timing(section: str):
elapsed = time.time() - start_time
logger.info("[TIMING] %s: %.3fs elapsed", section, elapsed)
logger.info("[CALLBACK] on_print_complete started for printer %s", printer_id)
try:
ws_data = {
"status": data.get("status"),
"filename": data.get("filename"),
"subtask_name": data.get("subtask_name"),
"timelapse_was_active": data.get("timelapse_was_active"),
}
await ws_manager.send_print_complete(printer_id, ws_data)
log_timing("WebSocket send_print_complete")
except Exception as e:
logger.warning("[CALLBACK] WebSocket send_print_complete failed: %s", e)
# Capture user info before clearing (needed for print log entry)
_print_user_info = printer_manager.get_current_print_user(printer_id)
# Clear current print user tracking (Issue #206)
printer_manager.clear_current_print_user(printer_id)
# If the user explicitly stopped this print from the queue UI the printer will
# report "failed" or "aborted" via MQTT. Override that to "cancelled" so the
# correct "print stopped" notification/email is sent instead of a failure alert.
_raw_status = data.get("status", "completed")
if printer_id in _user_stopped_printers and _raw_status in ("failed", "aborted"):
logger.info(
"[CALLBACK] Overriding status '%s' -> 'cancelled' for printer %s (print was stopped from queue by user)",
_raw_status,
printer_id,
)
data = {**data, "status": "cancelled"}
_user_stopped_printers.discard(printer_id)
# MQTT relay - publish print complete
try:
printer_info = printer_manager.get_printer(printer_id)
if printer_info:
await mqtt_relay.on_print_complete(
printer_id,
printer_info.name,
printer_info.serial_number,
data.get("filename", ""),
data.get("subtask_name", ""),
data.get("status", "completed"),
)
except Exception:
pass # Don't fail print complete callback if MQTT fails
filename = data.get("filename", "")
subtask_name = data.get("subtask_name", "")
if not filename and not subtask_name:
logger.warning("Print complete without filename or subtask_name")
return
logger.info("Print complete - filename: %s, subtask: %s, status: %s", filename, subtask_name, data.get("status"))
# Build list of possible keys to try (matching how they were registered in on_print_start)
possible_keys = []
# Try subtask_name variations first (most reliable for matching)
if subtask_name:
possible_keys.append((printer_id, f"{subtask_name}.3mf"))
possible_keys.append((printer_id, f"{subtask_name}.gcode.3mf"))
possible_keys.append((printer_id, subtask_name))
# Try filename variations
if filename:
# Extract just the filename if it's a path
fname = filename.split("/")[-1] if "/" in filename else filename
if fname.endswith(".3mf"):
possible_keys.append((printer_id, fname))
elif fname.endswith(".gcode"):
base_name = fname.rsplit(".", 1)[0]
possible_keys.append((printer_id, f"{base_name}.gcode.3mf"))
possible_keys.append((printer_id, f"{base_name}.3mf"))
possible_keys.append((printer_id, fname))
else:
possible_keys.append((printer_id, f"{fname}.gcode.3mf"))
possible_keys.append((printer_id, f"{fname}.3mf"))
possible_keys.append((printer_id, fname))
# Also try full path versions
if filename.endswith(".3mf"):
possible_keys.append((printer_id, filename))
elif filename.endswith(".gcode"):
base_name = filename.rsplit(".", 1)[0]
possible_keys.append((printer_id, f"{base_name}.3mf"))
possible_keys.append((printer_id, filename))
else:
possible_keys.append((printer_id, f"{filename}.3mf"))
possible_keys.append((printer_id, filename))
# Find the archive for this print
logger.info("Looking for archive in _active_prints, keys to try: %s...", possible_keys[:5])
logger.info("Current _active_prints: %s", list(_active_prints.keys()))
archive_id = None
for key in possible_keys:
archive_id = _active_prints.pop(key, None)
if archive_id:
logger.info("Found archive %s with key %s", archive_id, key)
# Also clean up any other keys pointing to this archive
keys_to_remove = [k for k, v in _active_prints.items() if v == archive_id]
for k in keys_to_remove:
_active_prints.pop(k, None)
break
if not archive_id:
# Try to find by filename or subtask_name if not tracked (for prints started before app)
async with async_session() as db:
from backend.app.models.archive import PrintArchive
# Try matching by subtask_name (stored as print_name) first
if subtask_name:
result = await db.execute(
select(PrintArchive)
.where(PrintArchive.printer_id == printer_id)
.where(PrintArchive.status == "printing")
.where(
or_(
PrintArchive.print_name.ilike(f"%{subtask_name}%"),
PrintArchive.filename.ilike(f"%{subtask_name}%"),
)
)
.order_by(PrintArchive.created_at.desc())
.limit(1)
)
archive = result.scalar_one_or_none()
if archive:
archive_id = archive.id
logger.info("Found archive %s by subtask_name match: %s", archive_id, subtask_name)
# Also try by filename
if not archive_id and filename:
result = await db.execute(
select(PrintArchive)
.where(PrintArchive.printer_id == printer_id)
.where(PrintArchive.filename == filename)
.where(PrintArchive.status == "printing")
.order_by(PrintArchive.created_at.desc())
.limit(1)
)
archive = result.scalar_one_or_none()
if archive:
archive_id = archive.id
# Cleanup: delete uploaded file from printer SD card to prevent phantom prints (Issue #374)
# The print scheduler uploads files to the SD card root (/). Some printers (e.g. P1S)
# auto-start files found in root on power cycle, causing ghost prints.
# Must run before the archive_id early-return so it executes even when archiving is disabled.
try:
if subtask_name:
async with async_session() as db:
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
if printer:
from backend.app.services.bambu_ftp import delete_file_async
# Try both .3mf and .gcode extensions — the printer may have either
for ext in (".3mf", ".gcode"):
remote_path = f"/{subtask_name}{ext}"
# Retry up to 3 times — the printer may still lock the filesystem briefly after a print ends
for attempt in range(1, 4):
try:
delete_result = await delete_file_async(
printer.ip_address,
printer.access_code,
remote_path,
printer_model=printer.model,
)
if delete_result:
logger.info("Deleted %s from printer %s SD card", remote_path, printer.name)
break
except Exception as e:
delete_result = False
logger.warning(
"SD card cleanup attempt %d/3 raised for %s: %s",
attempt,
remote_path,
e,
)
if not delete_result and attempt < 3:
await asyncio.sleep(2)
elif not delete_result:
logger.warning(
"SD card cleanup failed after 3 attempts for %s (file may linger on SD card)",
remote_path,
)
except Exception as e:
logger.warning("SD card file cleanup failed for printer %s: %s", printer_id, e)
log_timing("SD card cleanup")
# Update queue item status early — must run before the archive_id early-return
# so queue items don't get stuck in "printing" when archive lookup fails.
try:
async with async_session() as db:
from backend.app.models.print_queue import PrintQueueItem
result = await db.execute(
select(PrintQueueItem)
.where(PrintQueueItem.printer_id == printer_id)
.where(PrintQueueItem.status == "printing")
)
printing_items = list(result.scalars().all())
if len(printing_items) > 1:
logger.warning(
"BUG: Multiple queue items in 'printing' status for printer %s: %s",
printer_id,
[(i.id, i.archive_id, i.library_file_id) for i in printing_items],
)
queue_item = printing_items[0] if printing_items else None
if queue_item:
queue_status = data.get("status", "completed")
# MQTT sends "aborted" for cancelled prints; normalise to
# "cancelled" so it matches the queue schema Literal.
if queue_status == "aborted":
queue_status = "cancelled"
queue_item.status = queue_status
queue_item.completed_at = datetime.now(timezone.utc)
await db.commit()
logger.info("Updated queue item %s status to %s", queue_item.id, queue_status)
# MQTT relay - publish queue job completed
try:
printer_info = printer_manager.get_printer(printer_id)
await mqtt_relay.on_queue_job_completed(
job_id=queue_item.id,
filename=filename or subtask_name,
printer_id=printer_id,
printer_name=printer_info.name if printer_info else "Unknown",
status=queue_status,
)
except Exception:
pass # Don't fail if MQTT fails
# Check if queue is now empty and send notification
try:
from sqlalchemy import func as sa_func
count_result = await db.execute(
select(sa_func.count(PrintQueueItem.id)).where(PrintQueueItem.status == "pending")
)
pending_count = count_result.scalar() or 0
if pending_count == 0:
today_start = datetime.now(timezone.utc).replace(hour=0, minute=0, second=0, microsecond=0)
completed_result = await db.execute(
select(sa_func.count(PrintQueueItem.id)).where(
PrintQueueItem.status.in_(["completed", "failed", "skipped"]),
PrintQueueItem.completed_at >= today_start,
)
)
completed_count = completed_result.scalar() or 1
await notification_service.on_queue_completed(
completed_count=completed_count,
db=db,
)
except Exception:
pass # Don't fail if notification fails
# Handle auto_off_after - power off printer if requested (after cooldown)
if queue_item.auto_off_after:
result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
plug = result.scalar_one_or_none()
if plug and plug.enabled:
logger.info("Auto-off requested for printer %s, waiting for cooldown...", printer_id)
async def cooldown_and_poweroff(pid: int, plug_id: int):
# Wait for nozzle to cool down
await printer_manager.wait_for_cooldown(pid, target_temp=50.0, timeout=600)
# Re-fetch plug in new session
async with async_session() as new_db:
result = await new_db.execute(select(SmartPlug).where(SmartPlug.id == plug_id))
p = result.scalar_one_or_none()
if p and p.enabled:
success = await tasmota_service.turn_off(p)
if success:
logger.info("Powered off printer %s via smart plug '%s'", pid, p.name)
else:
logger.warning("Failed to power off printer %s via smart plug", pid)
asyncio.create_task(cooldown_and_poweroff(printer_id, plug.id))
except Exception as e:
logging.getLogger(__name__).warning(f"Queue item update failed: {e}")
log_timing("Queue item update")
# Start bed cooldown monitor (polls bed temp until it drops below threshold)
# Must run before archive_id early-return so it fires for all prints (including
# prints started from BambuStudio/touchscreen that have no archive).
async def _background_bed_cooldown():
"""Monitor bed temperature after print and notify when cooled."""
try:
from backend.app.api.routes.settings import get_setting
# Check threshold setting
async with async_session() as db:
threshold_str = await get_setting(db, "bed_cooled_threshold")
threshold = float(threshold_str) if threshold_str else 35.0
# Check if any provider has on_bed_cooled enabled (early exit if none)
async with async_session() as db:
providers = await notification_service._get_providers_for_event(db, "on_bed_cooled", printer_id)
if not providers:
logger.debug("[BED-COOL] No providers enabled for bed_cooled on printer %s", printer_id)
return
logger.info("[BED-COOL] Monitoring bed temp for printer %s (threshold: %.0f°C)", printer_id, threshold)
# Request a fresh full status so we get current bed_temper
printer_manager.request_status_update(printer_id)
max_polls = 120 # 120 * 15s = 30 min timeout
for poll_num in range(max_polls):
await asyncio.sleep(15)
# Request fresh temperature data every 60s — after print completion,
# the printer may send partial MQTT updates without bed_temper,
# leaving the cached value stale at the end-of-print temperature.
if poll_num % 4 == 0:
printer_manager.request_status_update(printer_id)
# Check if printer is still connected
status = printer_manager.get_status(printer_id)
if status is None:
logger.info("[BED-COOL] Printer %s disconnected, stopping monitor", printer_id)
return
# Check if a new print started (state == RUNNING)
if hasattr(status, "state") and status.state == "RUNNING":
logger.info("[BED-COOL] New print started on printer %s, stopping monitor", printer_id)
return
# Get bed temperature
bed_temp = None
if hasattr(status, "temperatures") and isinstance(status.temperatures, dict):
bed_temp = status.temperatures.get("bed")
if bed_temp is None:
logger.debug(
"[BED-COOL] Printer %s: bed temp is None (keys: %s, state: %s)",
printer_id,
list(status.temperatures.keys()) if isinstance(status.temperatures, dict) else "N/A",
status.state if hasattr(status, "state") else "N/A",
)
continue
logger.debug("[BED-COOL] Printer %s: bed=%.1f°C, threshold=%.0f°C", printer_id, bed_temp, threshold)
if bed_temp <= threshold:
logger.info(
"[BED-COOL] Bed cooled to %.1f°C on printer %s (threshold: %.0f°C)",
bed_temp,
printer_id,
threshold,
)
printer_info = printer_manager.get_printer(printer_id)
p_name = printer_info.name if printer_info else "Unknown"
async with async_session() as db:
await notification_service.on_bed_cooled(
printer_id=printer_id,
printer_name=p_name,
bed_temp=bed_temp,
threshold=threshold,
filename=filename or subtask_name or "",
db=db,
)
return
logger.info("[BED-COOL] Timeout waiting for bed to cool on printer %s", printer_id)
except asyncio.CancelledError:
logger.info("[BED-COOL] Bed cooldown monitor cancelled for printer %s", printer_id)
except Exception as e:
logger.warning("[BED-COOL] Failed: %s", e)
finally:
_bed_cooldown_tasks.pop(printer_id, None)
# Only start bed cooldown for completed prints
if data.get("status") == "completed":
# Cancel any existing task for this printer
existing_task = _bed_cooldown_tasks.pop(printer_id, None)
if existing_task and not existing_task.done():
existing_task.cancel()
task = asyncio.create_task(_background_bed_cooldown())
_bed_cooldown_tasks[printer_id] = task
if not archive_id:
logger.warning("Could not find archive for print complete: filename=%s, subtask=%s", filename, subtask_name)
# Still send print-complete/failed/stopped notifications even without an archive.
# Try to enrich with queue/library-file data so user-specific emails work too.
async def _notify_no_archive():
try:
async with async_session() as db:
from backend.app.models.library import LibraryFile
from backend.app.models.print_queue import PrintQueueItem
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer_obj = result.scalar_one_or_none()
p_name = printer_obj.name if printer_obj else f"Printer {printer_id}"
# Try to find the most-recent queue item for this printer so we can
# recover created_by_id and estimated print time.
# NOTE: By the time this task runs the queue item status has already
# been updated to a terminal state (completed/failed/cancelled), so
# we look for recently-completed items (within the last 5 minutes).
no_archive_data: dict | None = None
try:
cutoff = datetime.now(timezone.utc) - timedelta(minutes=5)
q_result = await db.execute(
select(PrintQueueItem)
.where(PrintQueueItem.printer_id == printer_id)
.where(PrintQueueItem.status.in_(["completed", "failed", "cancelled"]))
.where(PrintQueueItem.completed_at >= cutoff)
.order_by(PrintQueueItem.completed_at.desc())
.limit(1)
)
queue_item = q_result.scalar_one_or_none()
if queue_item:
no_archive_data = {"created_by_id": queue_item.created_by_id}
# Pull estimated time from library file when available
if queue_item.library_file_id:
lib_result = await db.execute(
select(LibraryFile).where(LibraryFile.id == queue_item.library_file_id)
)
lib_file = lib_result.scalar_one_or_none()
if lib_file and lib_file.print_time_seconds:
no_archive_data["print_time_seconds"] = lib_file.print_time_seconds
except Exception as lookup_err:
logger.debug(
"[NOTIFY-BG] Could not look up queue item for no-archive notification: %s", lookup_err
)
ps = data.get("status", "completed")
logger.info(
"[NOTIFY-BG] Sending notification without archive: printer=%s, status=%s", printer_id, ps
)
await notification_service.on_print_complete(
printer_id, p_name, ps, data, db, archive_data=no_archive_data
)
# Send user-specific email if we have a created_by_id
if no_archive_data and no_archive_data.get("created_by_id"):
raw_filename = data.get("subtask_name") or data.get("filename", "Unknown")
await _dispatch_user_print_email(
ps,
no_archive_data["created_by_id"],
p_name,
raw_filename,
db,
)
logger.info("[NOTIFY-BG] Completed (no-archive path)")
except Exception as e:
logger.warning("[NOTIFY-BG] Failed to send notification without archive: %s", e, exc_info=True)
task = asyncio.create_task(_notify_no_archive())
task.add_done_callback(lambda _t: None)
return
log_timing("Archive lookup")
# Update archive status
logger.info("[ARCHIVE] Updating archive %s status...", archive_id)
try:
async with async_session() as db:
service = ArchiveService(db)
status = data.get("status", "completed")
# Auto-detect failure reason
failure_reason = None
if status == "aborted":
failure_reason = "User cancelled"
logger.info("[ARCHIVE] Print was aborted by user, setting failure_reason='User cancelled'")
elif status == "failed":
# Try to determine failure reason from HMS errors
hms_errors = data.get("hms_errors", [])
if hms_errors:
logger.info("[ARCHIVE] HMS errors at failure: %s", hms_errors)
# Map known HMS error modules to failure reasons
# Module 0x07 = Filament, 0x0C = MC (Motion Controller), etc.
for err in hms_errors:
module = err.get("module", 0)
if module == 0x07: # Filament module
failure_reason = "Filament runout"
break
elif module == 0x0C: # Motion controller
failure_reason = "Layer shift"
break
elif module == 0x05: # Nozzle/extruder
failure_reason = "Clogged nozzle"
break
if failure_reason:
logger.info("[ARCHIVE] Detected failure_reason from HMS: %s", failure_reason)
else:
logger.info("[ARCHIVE] No HMS errors available to determine failure reason")
await service.update_archive_status(
archive_id,
status=status,
completed_at=datetime.now(timezone.utc) if status in ("completed", "failed", "aborted") else None,
failure_reason=failure_reason,
)
logger.info(
"[ARCHIVE] Archive %s status updated to %s, failure_reason=%s", archive_id, status, failure_reason
)
await ws_manager.send_archive_updated(
{
"id": archive_id,
"status": status,
}
)
logger.info("[ARCHIVE] WebSocket notification sent for archive %s", archive_id)
# MQTT relay - publish archive updated
try:
await mqtt_relay.on_archive_updated(
archive_id=archive_id,
print_name=filename or subtask_name,
status=status,
)
except Exception:
pass # Don't fail if MQTT fails
except Exception as e:
logger.error("[ARCHIVE] Failed to update archive %s status: %s", archive_id, e, exc_info=True)
# Continue with other operations even if archive update fails
log_timing("Archive status update")
# Write independent print log entry (separate table, never touches archives)
try:
async with async_session() as db:
from backend.app.models.archive import PrintArchive
from backend.app.services.print_log import write_log_entry
archive = await db.get(PrintArchive, archive_id)
if archive:
p_info = printer_manager.get_printer(printer_id)
await write_log_entry(
db,
status=data.get("status", "completed"),
print_name=archive.print_name,
printer_name=p_info.name if p_info else None,
printer_id=printer_id,
started_at=archive.started_at,
completed_at=archive.completed_at,
filament_type=archive.filament_type,
filament_color=archive.filament_color,
filament_used_grams=archive.filament_used_grams,
thumbnail_path=archive.thumbnail_path,
created_by_username=_print_user_info.get("username") if _print_user_info else None,
)
await db.commit()
logger.info("[PRINT_LOG] Log entry written for archive %s", archive_id)
except Exception as e:
logger.warning("[PRINT_LOG] Failed to write log entry for archive %s: %s", archive_id, e)
log_timing("Print log entry")
# Track filament consumption from AMS remain% deltas (skip if Spoolman handles usage)
usage_results: list[dict] = []
# Prefer ams_mapping captured from MQTT request topic (works for all print sources)
stored_ams_mapping = data.get("ams_mapping")
# Fallback to _print_ams_mappings for queue/reprint (set before print starts)
if not stored_ams_mapping and archive_id:
stored_ams_mapping = _print_ams_mappings.pop(archive_id, None)
try:
async with async_session() as db:
from backend.app.api.routes.settings import get_setting
_spoolman_on = await get_setting(db, "spoolman_enabled")
if not _spoolman_on or _spoolman_on.lower() != "true":
from backend.app.services.usage_tracker import on_print_complete as usage_on_print_complete
async with async_session() as db:
usage_results = await usage_on_print_complete(
printer_id,
data,
printer_manager,
db,
archive_id=archive_id,
ams_mapping=stored_ams_mapping,
)
if usage_results:
await ws_manager.broadcast(
{
"type": "spool_usage_logged",
"printer_id": printer_id,
"usage": usage_results,
}
)
log_timing("Usage tracker")
except Exception as e:
logger.warning("Usage tracker on_print_complete failed: %s", e)
# Report filament usage to Spoolman if print completed successfully
if data.get("status") == "completed":
try:
await _report_spoolman_usage(printer_id, archive_id)
log_timing("Spoolman usage report")
except Exception as e:
logger.warning("Spoolman usage reporting failed: %s", e)
else:
# Report partial usage if tracking data exists (only stored when weight sync is disabled)
try:
async with async_session() as db:
await _cleanup_spoolman_tracking(
printer_id,
archive_id,
db,
last_layer_num=data.get("last_layer_num"),
last_progress=data.get("last_progress"),
)
except Exception as e:
logger.debug("[SPOOLMAN] Cleanup failed: %s", e)
# Run slow operations as background tasks to avoid blocking the event loop
# These operations can take 5-10+ seconds and would freeze the UI if awaited
starting_kwh = _print_energy_start.pop(archive_id, None)
async def _background_energy_calculation():
"""Calculate and save energy usage in background."""
try:
logger.info("[ENERGY-BG] Starting energy calculation for archive %s", archive_id)
async with async_session() as db:
plug_result = await db.execute(select(SmartPlug).where(SmartPlug.printer_id == printer_id))
plug = plug_result.scalar_one_or_none()
if plug:
energy = await _get_plug_energy(plug, db)
logger.info("[ENERGY-BG] Energy response: %s", energy)
energy_used = None
if starting_kwh is not None and energy and energy.get("total") is not None:
ending_kwh = energy["total"]
energy_used = round(ending_kwh - starting_kwh, 4)
logger.info("[ENERGY-BG] Per-print energy: %s kWh", energy_used)
if energy_used is not None and energy_used >= 0:
from backend.app.api.routes.settings import get_setting
energy_cost_per_kwh = await get_setting(db, "energy_cost_per_kwh")
cost_per_kwh = float(energy_cost_per_kwh) if energy_cost_per_kwh else 0.15
energy_cost = round(energy_used * cost_per_kwh, 3)
from backend.app.models.archive import PrintArchive
result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
archive = result.scalar_one_or_none()
if archive:
archive.energy_kwh = energy_used
archive.energy_cost = energy_cost
await db.commit()
logger.info("[ENERGY-BG] Saved: %s kWh, cost=%s", energy_used, energy_cost)
else:
logger.info("[ENERGY-BG] No smart plug for printer %s", printer_id)
except Exception as e:
logger.warning("[ENERGY-BG] Failed: %s", e)
async def _background_finish_photo() -> str | None:
"""Capture finish photo in background. Returns photo filename if captured."""
try:
logger.info("[PHOTO-BG] Starting finish photo capture for archive %s", archive_id)
from backend.app.api.routes.camera import _active_chamber_streams, _active_streams, get_buffered_frame
async with async_session() as db:
from backend.app.api.routes.settings import get_setting
capture_enabled = await get_setting(db, "capture_finish_photo")
if capture_enabled is None or capture_enabled.lower() == "true":
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
if printer and archive_id:
from backend.app.models.archive import PrintArchive
result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
archive = result.scalar_one_or_none()
if archive:
import uuid
from datetime import datetime
from pathlib import Path
if archive.file_path:
archive_dir = app_settings.base_dir / Path(archive.file_path).parent
else:
logger.warning("[PHOTO-BG] Archive %s has no file_path, using fallback dir", archive_id)
archive_dir = app_settings.archive_dir / str(archive.id)
photo_filename = None
# Check for external camera first
if printer.external_camera_enabled and printer.external_camera_url:
logger.info("[PHOTO-BG] Using external camera")
from backend.app.services.external_camera import capture_frame
frame_data = await capture_frame(
printer.external_camera_url, printer.external_camera_type or "mjpeg"
)
if frame_data:
photos_dir = archive_dir / "photos"
photos_dir.mkdir(parents=True, exist_ok=True)
timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
photo_filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
photo_path = photos_dir / photo_filename
await asyncio.to_thread(photo_path.write_bytes, frame_data)
logger.info("[PHOTO-BG] Saved external camera frame: %s", photo_filename)
else:
# Check if camera stream is active - use buffered frame to avoid freeze
# Check both RTSP streams (_active_streams) and chamber image streams (_active_chamber_streams)
active_for_printer = [k for k in _active_streams if k.startswith(f"{printer_id}-")]
active_chamber_for_printer = [
k for k in _active_chamber_streams if k.startswith(f"{printer_id}-")
]
buffered_frame = get_buffered_frame(printer_id)
if (active_for_printer or active_chamber_for_printer) and buffered_frame:
# Use frame from active stream
logger.info("[PHOTO-BG] Using buffered frame from active stream")
photos_dir = archive_dir / "photos"
photos_dir.mkdir(parents=True, exist_ok=True)
timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
photo_filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
photo_path = photos_dir / photo_filename
await asyncio.to_thread(photo_path.write_bytes, buffered_frame)
logger.info("[PHOTO-BG] Saved buffered frame: %s", photo_filename)
else:
# No active stream - capture new frame
from backend.app.services.camera import capture_finish_photo
photo_filename = await capture_finish_photo(
printer_id=printer_id,
ip_address=printer.ip_address,
access_code=printer.access_code,
model=printer.model,
archive_dir=archive_dir,
)
if photo_filename:
photos = archive.photos or []
photos.append(photo_filename)
archive.photos = photos
await db.commit()
logger.info("[PHOTO-BG] Saved: %s", photo_filename)
return photo_filename
return None
except Exception as e:
logger.warning("[PHOTO-BG] Failed: %s", e)
return None
asyncio.create_task(_background_energy_calculation())
# Photo capture task - result will be used by notifications
photo_task = asyncio.create_task(_background_finish_photo())
log_timing("Background tasks scheduled (energy, photo)")
# Also run smart plug, notifications, and maintenance as background tasks
print_status = data.get("status", "completed")
async def _background_smart_plug():
"""Handle smart plug automation in background."""
try:
logger.info("[AUTO-OFF-BG] Starting smart plug automation for printer %s", printer_id)
async with async_session() as db:
await smart_plug_manager.on_print_complete(printer_id, print_status, db)
logger.info("[AUTO-OFF-BG] Completed")
except Exception as e:
logger.warning("[AUTO-OFF-BG] Failed: %s", e)
async def _background_notifications(finish_photo_filename: str | None = None):
"""Send print complete notifications in background."""
try:
logger.info(
"[NOTIFY-BG] Starting notifications for printer %s, photo=%s", printer_id, finish_photo_filename
)
async with async_session() as db:
from backend.app.models.archive import PrintArchive
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
printer_name = printer.name if printer else f"Printer {printer_id}"
archive_data = None
if archive_id:
archive_result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
archive = archive_result.scalar_one_or_none()
if archive:
archive_data = {
"print_time_seconds": archive.print_time_seconds,
"actual_filament_grams": archive.filament_used_grams,
"failure_reason": archive.failure_reason,
"created_by_id": archive.created_by_id,
}
# Scale filament usage for partial prints
if print_status != "completed" and archive.filament_used_grams:
progress = data.get("progress") or 0
scale = max(0.0, min(progress / 100.0, 1.0))
archive_data["actual_filament_grams"] = round(archive.filament_used_grams * scale, 1)
archive_data["progress"] = progress
# Pass per-slot data from archive.extra_data
if archive.extra_data and archive.extra_data.get("filament_slots"):
slots = archive.extra_data["filament_slots"]
if print_status != "completed":
scale = max(0.0, min((data.get("progress") or 0) / 100.0, 1.0))
slots = [{**s, "used_g": round(s["used_g"] * scale, 1)} for s in slots]
archive_data["filament_slots"] = slots
# Pass usage tracker results for AMS slot info in notifications
if usage_results:
archive_data["usage_results"] = usage_results
# Add finish photo URL and image bytes if available
if finish_photo_filename:
from backend.app.api.routes.settings import get_setting
external_url = await get_setting(db, "external_url")
if external_url:
external_url = external_url.rstrip("/")
archive_data["finish_photo_url"] = (
f"{external_url}/api/v1/archives/{archive_id}/photos/{finish_photo_filename}"
)
else:
# Fallback to relative URL (won't work for external services)
archive_data["finish_photo_url"] = (
f"/api/v1/archives/{archive_id}/photos/{finish_photo_filename}"
)
# Read finish photo bytes for image attachment (e.g. Pushover)
try:
from pathlib import Path
photo_path = (
app_settings.base_dir
/ Path(archive.file_path).parent
/ "photos"
/ finish_photo_filename
)
if photo_path.exists():
photo_bytes = await asyncio.to_thread(photo_path.read_bytes)
if len(photo_bytes) <= 2_500_000:
archive_data["image_data"] = photo_bytes
logger.info("[NOTIFY-BG] Loaded finish photo bytes: %s bytes", len(photo_bytes))
else:
logger.warning(
f"[NOTIFY-BG] Finish photo too large for attachment: "
f"{len(photo_bytes)} bytes"
)
except Exception as e:
logger.warning("[NOTIFY-BG] Failed to read finish photo bytes: %s", e)
await notification_service.on_print_complete(
printer_id, printer_name, print_status, data, db, archive_data=archive_data
)
# Send user-specific email notification
if archive_data:
created_by_id = archive_data.get("created_by_id")
raw_filename = data.get("subtask_name") or data.get("filename", "Unknown")
await _dispatch_user_print_email(
print_status,
created_by_id,
printer_name,
raw_filename,
db,
)
logger.info("[NOTIFY-BG] Completed")
except Exception as e:
logger.error("[NOTIFY-BG] Failed: %s", e, exc_info=True)
async def _background_maintenance_check():
"""Check for maintenance due in background."""
if print_status != "completed":
return
try:
logger.info("[MAINT-BG] Starting maintenance check for printer %s", printer_id)
async with async_session() as db:
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
printer_name = printer.name if printer else f"Printer {printer_id}"
await ensure_default_types(db)
overview = await _get_printer_maintenance_internal(printer_id, db, commit=True)
items_needing_attention = [
{"name": item.maintenance_type_name, "is_due": item.is_due, "is_warning": item.is_warning}
for item in overview.maintenance_items
if item.enabled and (item.is_due or item.is_warning)
]
if items_needing_attention:
await notification_service.on_maintenance_due(printer_id, printer_name, items_needing_attention, db)
logger.info("[MAINT-BG] Sent notification: %s items need attention", len(items_needing_attention))
# MQTT relay - publish maintenance alerts
for item in items_needing_attention:
try:
await mqtt_relay.on_maintenance_alert(
printer_id=printer_id,
printer_name=printer_name,
maintenance_type=item["name"],
current_value=0, # Not easily available here
threshold=0, # Not easily available here
)
except Exception:
pass # Don't fail if MQTT fails
else:
logger.info("[MAINT-BG] Completed (no items need attention)")
except Exception as e:
logger.warning("[MAINT-BG] Failed: %s", e)
asyncio.create_task(_background_smart_plug())
asyncio.create_task(_background_maintenance_check())
# Notification task waits for photo capture to complete first (with timeout)
async def _photo_then_notify():
"""Wait for photo capture, then send notification with photo URL."""
finish_photo = None
try:
finish_photo = await asyncio.wait_for(photo_task, timeout=45)
logger.info("[PHOTO-NOTIFY] Photo task returned: %s", finish_photo)
except TimeoutError:
logger.warning("[PHOTO-NOTIFY] Photo capture timed out after 45s, sending notification without photo")
except Exception as e:
logger.warning("[PHOTO-NOTIFY] Photo task failed: %s", e)
try:
await _background_notifications(finish_photo)
except Exception as e:
logger.error("[PHOTO-NOTIFY] Notification sending failed: %s", e, exc_info=True)
asyncio.create_task(_photo_then_notify())
# Stitch external camera layer timelapse if session was active
print_status = data.get("status", "completed")
async def _background_layer_timelapse():
"""Stitch layer timelapse and attach to archive."""
from backend.app.services.layer_timelapse import cancel_session, on_print_complete as tl_complete
try:
if print_status == "completed":
logger.info("[LAYER-TL] Stitching layer timelapse for printer %s", printer_id)
timelapse_path = await tl_complete(printer_id)
if timelapse_path and archive_id:
logger.info("[LAYER-TL] Attaching timelapse %s to archive %s", timelapse_path, archive_id)
async with async_session() as db:
service = ArchiveService(db)
timelapse_data = await asyncio.to_thread(timelapse_path.read_bytes)
await service.attach_timelapse(archive_id, timelapse_data, "layer_timelapse.mp4")
# Clean up the temp file
await asyncio.to_thread(timelapse_path.unlink, missing_ok=True)
logger.info("[LAYER-TL] Layer timelapse attached successfully")
elif timelapse_path:
# Timelapse created but no archive - just clean up
await asyncio.to_thread(timelapse_path.unlink, missing_ok=True)
else:
# Print failed or cancelled - cancel timelapse session
cancel_session(printer_id)
logger.info(
"[LAYER-TL] Cancelled layer timelapse for printer %s (status: %s)", printer_id, print_status
)
except Exception as e:
logger.warning("[LAYER-TL] Failed: %s", e)
# Try to cancel session on error
try:
cancel_session(printer_id)
except Exception:
pass # Best-effort timelapse session cancellation on error
asyncio.create_task(_background_layer_timelapse())
log_timing("All background tasks scheduled")
# Auto-scan for timelapse if recording was active during the print
if archive_id and data.get("timelapse_was_active") and data.get("status") == "completed":
logger.info("[TIMELAPSE] Timelapse was active during print, scheduling auto-scan for archive %s", archive_id)
# Schedule timelapse scan as background task with retries
# The printer needs time to encode the video after print completion
baseline = _timelapse_baselines.pop(printer_id, None)
asyncio.create_task(_scan_for_timelapse_with_retries(archive_id, baseline))
log_timing("Timelapse scan scheduled")
logger.info("[CALLBACK] on_print_complete finished for printer %s, archive %s", printer_id, archive_id)
# AMS sensor history recording
_ams_history_task: asyncio.Task | None = None
AMS_HISTORY_INTERVAL = 300 # Record every 5 minutes
AMS_HISTORY_RETENTION_DAYS = 30 # Keep data for 30 days
_ams_cleanup_counter = 0 # Track recordings to trigger periodic cleanup
# Track alarm cooldowns (printer_id:ams_id:type -> last_alarm_time)
_ams_alarm_cooldown: dict[str, datetime] = {}
AMS_ALARM_COOLDOWN_MINUTES = 60 # Don't send same alarm more than once per hour
async def record_ams_history():
"""Background task to record AMS humidity and temperature data."""
logger = logging.getLogger(__name__)
# Wait a short time for MQTT connections to establish on startup
await asyncio.sleep(10)
while True:
try:
from backend.app.models.ams_history import AMSSensorHistory
from backend.app.models.printer import Printer
from backend.app.models.settings import Settings
async with async_session() as db:
# Get all active printers
result = await db.execute(select(Printer).where(Printer.is_active.is_(True)))
printers = result.scalars().all()
# Get alarm thresholds from settings
humidity_threshold = 60.0 # Default: fair threshold
temp_threshold = 35.0 # Default: fair threshold
result = await db.execute(select(Settings).where(Settings.key == "ams_humidity_fair"))
setting = result.scalar_one_or_none()
if setting:
try:
humidity_threshold = float(setting.value)
except (ValueError, TypeError):
pass # Keep default threshold if stored value is invalid
result = await db.execute(select(Settings).where(Settings.key == "ams_temp_fair"))
setting = result.scalar_one_or_none()
if setting:
try:
temp_threshold = float(setting.value)
except (ValueError, TypeError):
pass # Keep default threshold if stored value is invalid
recorded_count = 0
for printer in printers:
# Get current state from printer manager
state = printer_manager.get_status(printer.id)
if not state or not state.connected or not state.raw_data:
continue # Skip disconnected printers - don't use stale data
raw_data = state.raw_data
if "ams" not in raw_data or not isinstance(raw_data["ams"], list):
continue
# Record data for each AMS unit
for ams_data in raw_data["ams"]:
ams_id = int(ams_data.get("id", 0))
# Get humidity (prefer humidity_raw)
humidity_raw = ams_data.get("humidity_raw")
humidity_idx = ams_data.get("humidity")
humidity = None
if humidity_raw is not None:
try:
humidity = float(humidity_raw)
except (ValueError, TypeError):
pass # Skip unparseable humidity; will try fallback
if humidity is None and humidity_idx is not None:
try:
humidity = float(humidity_idx)
except (ValueError, TypeError):
pass # Skip unparseable humidity index value
# Get temperature
temperature = None
temp_str = ams_data.get("temp")
if temp_str is not None:
try:
temperature = float(temp_str)
except (ValueError, TypeError):
pass # Skip unparseable temperature value
# Skip if no data
if humidity is None and temperature is None:
continue
# Record the data point
history = AMSSensorHistory(
printer_id=printer.id,
ams_id=ams_id,
humidity=humidity,
humidity_raw=float(humidity_raw) if humidity_raw else None,
temperature=temperature,
)
db.add(history)
recorded_count += 1
# Generate AMS label and determine if it's AMS-HT (A, B, C, D or HT-A for AMS-Lite/Hub)
is_ams_ht = ams_id >= 128
if is_ams_ht:
ams_label = f"HT-{chr(65 + (ams_id - 128))}"
else:
ams_label = f"AMS-{chr(65 + ams_id)}"
# Check humidity alarm (only if above threshold)
if humidity is not None and humidity > humidity_threshold:
cooldown_key = f"{printer.id}:{ams_id}:humidity"
last_alarm = _ams_alarm_cooldown.get(cooldown_key)
now = datetime.now(timezone.utc)
if (
last_alarm is None
or (now - last_alarm).total_seconds() >= AMS_ALARM_COOLDOWN_MINUTES * 60
):
_ams_alarm_cooldown[cooldown_key] = now
logger.info(
f"Sending humidity alarm for {printer.name} {ams_label}: {humidity}% > {humidity_threshold}%"
)
try:
# Call different notification method based on AMS type
if is_ams_ht:
await notification_service.on_ams_ht_humidity_high(
printer.id, printer.name, ams_label, humidity, humidity_threshold, db
)
else:
await notification_service.on_ams_humidity_high(
printer.id, printer.name, ams_label, humidity, humidity_threshold, db
)
except Exception as e:
logger.warning("Failed to send humidity alarm: %s", e)
# Check temperature alarm (only if above threshold)
if temperature is not None and temperature > temp_threshold:
cooldown_key = f"{printer.id}:{ams_id}:temperature"
last_alarm = _ams_alarm_cooldown.get(cooldown_key)
now = datetime.now(timezone.utc)
if (
last_alarm is None
or (now - last_alarm).total_seconds() >= AMS_ALARM_COOLDOWN_MINUTES * 60
):
_ams_alarm_cooldown[cooldown_key] = now
logger.info(
f"Sending temperature alarm for {printer.name} {ams_label}: {temperature}°C > {temp_threshold}°C"
)
try:
# Call different notification method based on AMS type
if is_ams_ht:
await notification_service.on_ams_ht_temperature_high(
printer.id, printer.name, ams_label, temperature, temp_threshold, db
)
else:
await notification_service.on_ams_temperature_high(
printer.id, printer.name, ams_label, temperature, temp_threshold, db
)
except Exception as e:
logger.warning("Failed to send temperature alarm: %s", e)
await db.commit()
if recorded_count > 0:
logger.info("Recorded %s AMS sensor history entries", recorded_count)
# Periodic cleanup of old data (every ~288 recordings = ~24 hours at 5min interval)
global _ams_cleanup_counter
_ams_cleanup_counter += 1
if _ams_cleanup_counter >= 288:
_ams_cleanup_counter = 0
# Get retention days from settings
from backend.app.models.settings import Settings
result = await db.execute(select(Settings).where(Settings.key == "ams_history_retention_days"))
setting = result.scalar_one_or_none()
retention_days = int(setting.value) if setting else AMS_HISTORY_RETENTION_DAYS
cutoff = datetime.now(timezone.utc) - timedelta(days=retention_days)
result = await db.execute(delete(AMSSensorHistory).where(AMSSensorHistory.recorded_at < cutoff))
await db.commit()
if result.rowcount > 0:
logger.info(
f"Cleaned up {result.rowcount} old AMS sensor history entries (older than {retention_days} days)"
)
# Wait until next recording interval
await asyncio.sleep(AMS_HISTORY_INTERVAL)
except asyncio.CancelledError:
break
except Exception as e:
logger.warning("AMS history recording failed: %s", e)
await asyncio.sleep(60) # Wait a bit before retrying
def start_ams_history_recording():
"""Start the AMS history recording background task."""
global _ams_history_task
if _ams_history_task is None:
_ams_history_task = asyncio.create_task(record_ams_history())
logging.getLogger(__name__).info("AMS history recording started")
def stop_ams_history_recording():
"""Stop the AMS history recording background task."""
global _ams_history_task
if _ams_history_task:
_ams_history_task.cancel()
_ams_history_task = None
logging.getLogger(__name__).info("AMS history recording stopped")
# Printer runtime tracking
_runtime_tracking_task: asyncio.Task | None = None
RUNTIME_TRACKING_INTERVAL = 30 # Update every 30 seconds
async def track_printer_runtime():
"""Background task to track printer active runtime (RUNNING/PAUSE states)."""
logger = logging.getLogger(__name__)
# Wait for MQTT connections to establish on startup
await asyncio.sleep(15)
while True:
try:
from backend.app.models.printer import Printer
async with async_session() as db:
# Get all active printers
result = await db.execute(select(Printer).where(Printer.is_active.is_(True)))
printers = result.scalars().all()
now = datetime.now(timezone.utc)
updated_count = 0
needs_commit = False
for printer in printers:
# Get current state from printer manager
state = printer_manager.get_status(printer.id)
if not state:
logger.debug("[%s] Runtime tracking: no state available", printer.name)
continue
if not state.connected:
logger.debug("[%s] Runtime tracking: not connected", printer.name)
continue
# Check if printer is in an active state (RUNNING or PAUSE)
if state.state in ("RUNNING", "PAUSE"):
# Calculate time since last update
if printer.last_runtime_update:
last_update = printer.last_runtime_update
if last_update.tzinfo is None:
last_update = last_update.replace(tzinfo=timezone.utc)
elapsed = (now - last_update).total_seconds()
if elapsed > 0:
printer.runtime_seconds += int(elapsed)
updated_count += 1
needs_commit = True
logger.debug(
f"[{printer.name}] Runtime tracking: added {int(elapsed)}s, "
f"total={printer.runtime_seconds}s ({printer.runtime_seconds / 3600:.2f}h)"
)
else:
# First time seeing printer active - need to commit to save timestamp
needs_commit = True
logger.debug("[%s] Runtime tracking: first active detection", printer.name)
printer.last_runtime_update = now
else:
# Printer is idle/offline - clear last_runtime_update
if printer.last_runtime_update is not None:
logger.debug(
f"[{printer.name}] Runtime tracking: state={state.state}, clearing last_runtime_update"
)
printer.last_runtime_update = None
needs_commit = True
if needs_commit:
await db.commit()
if updated_count > 0:
logger.debug("Updated runtime for %s printer(s)", updated_count)
except asyncio.CancelledError:
logger.info("Runtime tracking cancelled")
break
except Exception as e:
logger.warning("Runtime tracking failed: %s", e)
await asyncio.sleep(RUNTIME_TRACKING_INTERVAL)
def start_runtime_tracking():
"""Start the printer runtime tracking background task."""
global _runtime_tracking_task
if _runtime_tracking_task is None:
_runtime_tracking_task = asyncio.create_task(track_printer_runtime())
logging.getLogger(__name__).info("Printer runtime tracking started")
def stop_runtime_tracking():
"""Stop the printer runtime tracking background task."""
global _runtime_tracking_task
if _runtime_tracking_task:
_runtime_tracking_task.cancel()
_runtime_tracking_task = None
logging.getLogger(__name__).info("Printer runtime tracking stopped")
# SpoolBuddy device watchdog
_spoolbuddy_watchdog_task: asyncio.Task | None = None
SPOOLBUDDY_WATCHDOG_INTERVAL = 15
async def _spoolbuddy_watchdog_loop():
"""Periodic check for SpoolBuddy devices that have gone offline."""
from backend.app.api.routes.spoolbuddy import spoolbuddy_watchdog
while True:
try:
await spoolbuddy_watchdog()
except asyncio.CancelledError:
break
except Exception as e:
logging.getLogger(__name__).warning("SpoolBuddy watchdog failed: %s", e)
await asyncio.sleep(SPOOLBUDDY_WATCHDOG_INTERVAL)
def start_spoolbuddy_watchdog():
global _spoolbuddy_watchdog_task
if _spoolbuddy_watchdog_task is None:
_spoolbuddy_watchdog_task = asyncio.create_task(_spoolbuddy_watchdog_loop())
logging.getLogger(__name__).info("SpoolBuddy watchdog started")
def stop_spoolbuddy_watchdog():
global _spoolbuddy_watchdog_task
if _spoolbuddy_watchdog_task:
_spoolbuddy_watchdog_task.cancel()
_spoolbuddy_watchdog_task = None
logging.getLogger(__name__).info("SpoolBuddy watchdog stopped")
# Camera stream orphan cleanup
_camera_cleanup_task: asyncio.Task | None = None
CAMERA_CLEANUP_INTERVAL = 60
async def _camera_cleanup_loop():
"""Periodically clean up orphaned ffmpeg processes."""
from backend.app.api.routes.camera import cleanup_orphaned_streams
while True:
try:
await cleanup_orphaned_streams()
except asyncio.CancelledError:
break
except Exception as e:
logging.getLogger(__name__).warning("Camera stream cleanup failed: %s", e)
await asyncio.sleep(CAMERA_CLEANUP_INTERVAL)
def start_camera_cleanup():
global _camera_cleanup_task
if _camera_cleanup_task is None:
_camera_cleanup_task = asyncio.create_task(_camera_cleanup_loop())
logging.getLogger(__name__).info("Camera stream cleanup started")
def stop_camera_cleanup():
global _camera_cleanup_task
if _camera_cleanup_task:
_camera_cleanup_task.cancel()
_camera_cleanup_task = None
logging.getLogger(__name__).info("Camera stream cleanup stopped")
# ---------------------------------------------------------------------------
# Expected-print TTL eviction
# ---------------------------------------------------------------------------
def _evict_stale_expected_prints() -> None:
"""Remove entries from _expected_prints / _expected_print_creators that are
older than _EXPECTED_PRINT_TTL_SECONDS.
This prevents unbounded growth when a print is registered (via
register_expected_print) but on_print_start never fires — e.g. because the
printer disconnects, the app restarts, or the print is started directly from
the printer panel without going through the queue.
"""
# Use monotonic time so the TTL is unaffected by system clock adjustments
# (e.g. NTP sync, DST changes).
cutoff = time.monotonic() - _EXPECTED_PRINT_TTL_SECONDS
stale_keys = [k for k, t in _expected_print_registered_at.items() if t < cutoff]
if not stale_keys:
return
evicted_archive_ids: set[int] = set()
for key in stale_keys:
archive_id = _expected_prints.pop(key, None)
if archive_id is not None:
evicted_archive_ids.add(archive_id)
_expected_print_creators.pop(key, None)
_expected_print_registered_at.pop(key, None)
# Also clean up _print_ams_mappings for archive_ids that have no remaining
# live keys in _expected_prints (i.e. all variants were just evicted).
live_archive_ids = set(_expected_prints.values())
for archive_id in evicted_archive_ids:
if archive_id not in live_archive_ids:
_print_ams_mappings.pop(archive_id, None)
logging.getLogger(__name__).info(
"Evicted %d stale expected-print entries (TTL=%ds)", len(stale_keys), _EXPECTED_PRINT_TTL_SECONDS
)
async def _expected_prints_cleanup_loop() -> None:
"""Background task: periodically evict stale expected-print entries."""
while True:
try:
_evict_stale_expected_prints()
except asyncio.CancelledError:
raise
except Exception as e:
logging.getLogger(__name__).warning("Expected prints cleanup failed: %s", e)
await asyncio.sleep(_EXPECTED_PRINT_CLEANUP_INTERVAL)
def start_expected_prints_cleanup() -> None:
global _expected_prints_cleanup_task
if _expected_prints_cleanup_task is None:
_expected_prints_cleanup_task = asyncio.create_task(_expected_prints_cleanup_loop())
logging.getLogger(__name__).info("Expected prints cleanup started")
def stop_expected_prints_cleanup() -> None:
global _expected_prints_cleanup_task
if _expected_prints_cleanup_task:
_expected_prints_cleanup_task.cancel()
_expected_prints_cleanup_task = None
logging.getLogger(__name__).info("Expected prints cleanup stopped")
@asynccontextmanager
async def lifespan(app: FastAPI):
# Startup
await init_db()
# Fix queue items stuck with invalid "aborted" status (should be "cancelled").
# This can happen when a print was cancelled mid-print on versions before this fix.
try:
async with async_session() as db:
from backend.app.models.print_queue import PrintQueueItem
result = await db.execute(select(PrintQueueItem).where(PrintQueueItem.status == "aborted"))
aborted_items = result.scalars().all()
if aborted_items:
for item in aborted_items:
item.status = "cancelled"
await db.commit()
logging.info("Fixed %d queue item(s) with invalid 'aborted' status → 'cancelled'", len(aborted_items))
except Exception as e:
logging.warning("Failed to fix aborted queue items: %s", e)
# Restore debug logging state from previous session
await init_debug_logging()
# Set up printer manager callbacks
loop = asyncio.get_event_loop()
printer_manager.set_event_loop(loop)
printer_manager.set_status_change_callback(on_printer_status_change)
printer_manager.set_print_start_callback(on_print_start)
printer_manager.set_print_complete_callback(on_print_complete)
printer_manager.set_ams_change_callback(on_ams_change)
# Layer change callback for external camera timelapse
async def on_layer_change(printer_id: int, layer_num: int):
"""Capture timelapse frame on layer change + first layer notification."""
from backend.app.services.layer_timelapse import on_layer_change as tl_layer_change
await tl_layer_change(printer_id, layer_num)
# First layer complete notification (layer_num >= 2 means layer 1 is done)
if 2 <= layer_num <= 5 and not _first_layer_notified.get(printer_id, False):
_first_layer_notified[printer_id] = True
try:
async with async_session() as db:
from backend.app.models.printer import Printer
result = await db.execute(select(Printer).where(Printer.id == printer_id))
printer = result.scalar_one_or_none()
if not printer:
return
printer_name = printer.name
client = printer_manager.get_client(printer_id)
state = client.state if client else None
filename = (state.subtask_name or state.gcode_file or "Unknown") if state else "Unknown"
total_layers = state.total_layers if state else 0
image_data = await _capture_snapshot_for_notification(
printer_id, printer, logging.getLogger(__name__)
)
await notification_service.on_first_layer_complete(
printer_id, printer_name, filename, total_layers, db, image_data=image_data
)
except Exception as e:
logging.getLogger(__name__).warning("First layer notification failed: %s", e)
printer_manager.set_layer_change_callback(on_layer_change)
# Initialize MQTT relay from settings
async with async_session() as db:
from backend.app.api.routes.settings import get_setting
mqtt_settings = {
"mqtt_enabled": (await get_setting(db, "mqtt_enabled") or "false") == "true",
"mqtt_broker": await get_setting(db, "mqtt_broker") or "",
"mqtt_port": int(await get_setting(db, "mqtt_port") or "1883"),
"mqtt_username": await get_setting(db, "mqtt_username") or "",
"mqtt_password": await get_setting(db, "mqtt_password") or "",
"mqtt_topic_prefix": await get_setting(db, "mqtt_topic_prefix") or "bambuddy",
"mqtt_use_tls": (await get_setting(db, "mqtt_use_tls") or "false") == "true",
}
await mqtt_relay.configure(mqtt_settings)
# Restore MQTT smart plug subscriptions
if mqtt_settings.get("mqtt_enabled"):
from backend.app.models.smart_plug import SmartPlug
result = await db.execute(select(SmartPlug).where(SmartPlug.plug_type == "mqtt"))
mqtt_plugs = result.scalars().all()
for plug in mqtt_plugs:
if plug.mqtt_topic:
mqtt_relay.smart_plug_service.subscribe(
plug_id=plug.id,
topic=plug.mqtt_topic,
power_path=plug.mqtt_power_path,
energy_path=plug.mqtt_energy_path,
state_path=plug.mqtt_state_path,
multiplier=plug.mqtt_multiplier or 1.0,
)
if mqtt_plugs:
logging.info("Restored %s MQTT smart plug subscriptions", len(mqtt_plugs))
# Connect to all active printers
async with async_session() as db:
await init_printer_connections(db)
# Auto-connect to Spoolman if enabled
async with async_session() as db:
from backend.app.api.routes.settings import get_setting
spoolman_enabled = await get_setting(db, "spoolman_enabled")
spoolman_url = await get_setting(db, "spoolman_url")
if spoolman_enabled and spoolman_enabled.lower() == "true" and spoolman_url:
try:
client = await init_spoolman_client(spoolman_url)
if await client.health_check():
logging.info("Auto-connected to Spoolman at %s", spoolman_url)
# Ensure the 'tag' extra field exists for RFID/UUID storage
await client.ensure_tag_extra_field()
else:
logging.warning("Spoolman at %s is not reachable", spoolman_url)
except Exception as e:
logging.warning("Failed to auto-connect to Spoolman: %s", e)
# Start the print scheduler
asyncio.create_task(print_scheduler.run())
# Start background dispatch worker for send/start operations
await background_dispatch.start()
# Start the smart plug scheduler for time-based on/off
smart_plug_manager.start_scheduler()
# Resume any pending auto-offs that were interrupted by restart
await smart_plug_manager.resume_pending_auto_offs()
# Start the notification digest scheduler
notification_service.start_digest_scheduler()
# Start the GitHub backup scheduler
await github_backup_service.start_scheduler()
# Start AMS history recording
start_ams_history_recording()
# Start printer runtime tracking
start_runtime_tracking()
# Start SpoolBuddy device watchdog
start_spoolbuddy_watchdog()
# Start camera stream orphan cleanup
start_camera_cleanup()
# Start expected-print TTL eviction (prevents memory leak when prints are
# registered but on_print_start never fires)
start_expected_prints_cleanup()
# Initialize virtual printer manager and sync from DB
from backend.app.services.virtual_printer import virtual_printer_manager
virtual_printer_manager.set_session_factory(async_session)
try:
await virtual_printer_manager.sync_from_db()
logging.info("Virtual printer manager synced from database")
except Exception as e:
logging.warning("Failed to sync virtual printers: %s", e)
yield
# Shutdown
print_scheduler.stop()
await background_dispatch.stop()
smart_plug_manager.stop_scheduler()
notification_service.stop_digest_scheduler()
github_backup_service.stop_scheduler()
stop_ams_history_recording()
stop_runtime_tracking()
stop_spoolbuddy_watchdog()
stop_camera_cleanup()
stop_expected_prints_cleanup()
printer_manager.disconnect_all()
await close_spoolman_client()
# Stop all virtual printer services
await virtual_printer_manager.stop_all()
await mqtt_smart_plug_service.disconnect(timeout=2)
await mqtt_relay.disconnect(timeout=2)
# Checkpoint WAL and close all database connections
try:
async with engine.begin() as conn:
await conn.execute(text("PRAGMA wal_checkpoint(TRUNCATE)"))
logging.info("WAL checkpoint completed")
except Exception as e:
logging.warning("WAL checkpoint failed: %s", e)
await engine.dispose()
app = FastAPI(
title=app_settings.app_name,
description="Archive and manage Bambu Lab 3MF files",
version=APP_VERSION,
lifespan=lifespan,
)
# =============================================================================
# Authentication Middleware - Secures ALL API routes by default
# =============================================================================
# Public routes that don't require authentication even when auth is enabled
PUBLIC_API_ROUTES = {
# Auth routes needed before/during login
"/api/v1/auth/status",
"/api/v1/auth/login",
"/api/v1/auth/setup", # Needed for initial setup and recovery
# Advanced auth status needed for login page
"/api/v1/auth/advanced-auth/status",
"/api/v1/auth/forgot-password", # Password reset for advanced auth
# Version check for updates (no sensitive data)
"/api/v1/updates/version",
# Metrics endpoint handles its own prometheus_token authentication
"/api/v1/metrics",
}
# Route prefixes that are public (for routes with dynamic segments)
PUBLIC_API_PREFIXES = [
# WebSocket connections handle their own auth
"/api/v1/ws",
]
# Route patterns that are public (read-only display data)
# These are checked with "in path" - needed because browsers load images/videos
# via