{
  "version": "1.0.0",
  "description": "Filament preset field definitions for Bambu Lab printers",
  "fields": [
    {
      "key": "filament_vendor",
      "label": "Vendor",
      "type": "text",
      "category": "basic",
      "description": "Filament manufacturer name"
    },
    {
      "key": "filament_type",
      "label": "Filament Type",
      "type": "select",
      "category": "basic",
      "description": "Material type",
      "options": [
        {"value": "PLA", "label": "PLA"},
        {"value": "ABS", "label": "ABS"},
        {"value": "PETG", "label": "PETG"},
        {"value": "TPU", "label": "TPU"},
        {"value": "PA", "label": "PA (Nylon)"},
        {"value": "PA-CF", "label": "PA-CF"},
        {"value": "PET-CF", "label": "PET-CF"},
        {"value": "PC", "label": "PC"},
        {"value": "ASA", "label": "ASA"},
        {"value": "PVA", "label": "PVA"},
        {"value": "HIPS", "label": "HIPS"}
      ]
    },
    {
      "key": "filament_cost",
      "label": "Filament Cost",
      "type": "number",
      "category": "basic",
      "description": "Cost per kg",
      "unit": "$/kg"
    },
    {
      "key": "filament_density",
      "label": "Density",
      "type": "number",
      "category": "basic",
      "description": "Material density",
      "unit": "g/cm³",
      "step": 0.01
    },
    {
      "key": "filament_diameter",
      "label": "Filament Diameter",
      "type": "number",
      "category": "basic",
      "description": "Filament diameter",
      "unit": "mm",
      "step": 0.01,
      "min": 1.5,
      "max": 3.0
    },
    {
      "key": "nozzle_temperature",
      "label": "Nozzle Temperature",
      "type": "text",
      "category": "temperature",
      "description": "Printing temperature (comma-separated: normal,first layer)",
      "unit": "°C"
    },
    {
      "key": "nozzle_temperature_initial_layer",
      "label": "Initial Layer Nozzle Temp",
      "type": "text",
      "category": "temperature",
      "description": "First layer nozzle temperature",
      "unit": "°C"
    },
    {
      "key": "nozzle_temperature_range_low",
      "label": "Min Nozzle Temp",
      "type": "number",
      "category": "temperature",
      "description": "Minimum recommended nozzle temperature",
      "unit": "°C",
      "min": 150,
      "max": 350
    },
    {
      "key": "nozzle_temperature_range_high",
      "label": "Max Nozzle Temp",
      "type": "number",
      "category": "temperature",
      "description": "Maximum recommended nozzle temperature",
      "unit": "°C",
      "min": 150,
      "max": 350
    },
    {
      "key": "hot_plate_temp",
      "label": "Bed Temperature (Hot Plate)",
      "type": "number",
      "category": "temperature",
      "description": "Bed temperature for standard plate",
      "unit": "°C",
      "min": 0,
      "max": 120
    },
    {
      "key": "hot_plate_temp_initial_layer",
      "label": "Initial Layer Bed Temp (Hot Plate)",
      "type": "number",
      "category": "temperature",
      "description": "First layer bed temperature for standard plate",
      "unit": "°C",
      "min": 0,
      "max": 120
    },
    {
      "key": "cool_plate_temp",
      "label": "Bed Temperature (Cool Plate)",
      "type": "number",
      "category": "temperature",
      "description": "Bed temperature for cool plate",
      "unit": "°C",
      "min": 0,
      "max": 120
    },
    {
      "key": "cool_plate_temp_initial_layer",
      "label": "Initial Layer Bed Temp (Cool Plate)",
      "type": "number",
      "category": "temperature",
      "description": "First layer bed temperature for cool plate",
      "unit": "°C",
      "min": 0,
      "max": 120
    },
    {
      "key": "eng_plate_temp",
      "label": "Bed Temperature (Engineering Plate)",
      "type": "number",
      "category": "temperature",
      "description": "Bed temperature for engineering plate",
      "unit": "°C",
      "min": 0,
      "max": 120
    },
    {
      "key": "eng_plate_temp_initial_layer",
      "label": "Initial Layer Bed Temp (Eng Plate)",
      "type": "number",
      "category": "temperature",
      "description": "First layer bed temperature for engineering plate",
      "unit": "°C",
      "min": 0,
      "max": 120
    },
    {
      "key": "textured_plate_temp",
      "label": "Bed Temperature (Textured Plate)",
      "type": "number",
      "category": "temperature",
      "description": "Bed temperature for textured plate",
      "unit": "°C",
      "min": 0,
      "max": 120
    },
    {
      "key": "textured_plate_temp_initial_layer",
      "label": "Initial Layer Bed Temp (Textured)",
      "type": "number",
      "category": "temperature",
      "description": "First layer bed temperature for textured plate",
      "unit": "°C",
      "min": 0,
      "max": 120
    },
    {
      "key": "temperature_vitrification",
      "label": "Glass Transition Temperature",
      "type": "number",
      "category": "temperature",
      "description": "Glass transition temperature of material",
      "unit": "°C"
    },
    {
      "key": "pressure_advance",
      "label": "Pressure Advance",
      "type": "number",
      "category": "flow",
      "description": "Pressure advance value for linear advance",
      "step": 0.001,
      "min": 0,
      "max": 0.2
    },
    {
      "key": "enable_pressure_advance",
      "label": "Enable Pressure Advance",
      "type": "boolean",
      "category": "flow",
      "description": "Enable pressure advance compensation"
    },
    {
      "key": "filament_flow_ratio",
      "label": "Flow Ratio",
      "type": "number",
      "category": "flow",
      "description": "Flow rate multiplier",
      "step": 0.01,
      "min": 0.8,
      "max": 1.2
    },
    {
      "key": "filament_max_volumetric_speed",
      "label": "Max Volumetric Speed",
      "type": "text",
      "category": "flow",
      "description": "Maximum volumetric flow rate (comma-separated values)",
      "unit": "mm³/s"
    },
    {
      "key": "fan_min_speed",
      "label": "Min Fan Speed",
      "type": "number",
      "category": "cooling",
      "description": "Minimum part cooling fan speed",
      "unit": "%",
      "min": 0,
      "max": 100
    },
    {
      "key": "fan_max_speed",
      "label": "Max Fan Speed",
      "type": "number",
      "category": "cooling",
      "description": "Maximum part cooling fan speed",
      "unit": "%",
      "min": 0,
      "max": 100
    },
    {
      "key": "fan_cooling_layer_time",
      "label": "Fan Cooling Layer Time",
      "type": "number",
      "category": "cooling",
      "description": "Layer time threshold for max fan",
      "unit": "s",
      "min": 0,
      "max": 120
    },
    {
      "key": "slow_down_layer_time",
      "label": "Slow Down Layer Time",
      "type": "number",
      "category": "cooling",
      "description": "Minimum layer time before slowing down",
      "unit": "s",
      "min": 0,
      "max": 60
    },
    {
      "key": "slow_down_min_speed",
      "label": "Slow Down Min Speed",
      "type": "number",
      "category": "cooling",
      "description": "Minimum speed when slowing down for cooling",
      "unit": "mm/s",
      "min": 5,
      "max": 100
    },
    {
      "key": "close_fan_the_first_x_layers",
      "label": "Disable Fan First Layers",
      "type": "number",
      "category": "cooling",
      "description": "Number of initial layers without fan",
      "min": 0,
      "max": 10
    },
    {
      "key": "overhang_fan_threshold",
      "label": "Overhang Fan Threshold",
      "type": "text",
      "category": "cooling",
      "description": "Overhang angle to trigger fan boost"
    },
    {
      "key": "overhang_fan_speed",
      "label": "Overhang Fan Speed",
      "type": "number",
      "category": "cooling",
      "description": "Fan speed for overhangs",
      "unit": "%",
      "min": 0,
      "max": 100
    },
    {
      "key": "reduce_fan_stop_start_freq",
      "label": "Reduce Fan Stop/Start Frequency",
      "type": "boolean",
      "category": "cooling",
      "description": "Prevent frequent fan speed changes"
    },
    {
      "key": "activate_air_filtration",
      "label": "Activate Air Filtration",
      "type": "boolean",
      "category": "chamber",
      "description": "Enable chamber air filtration during print"
    },
    {
      "key": "during_print_exhaust_fan_speed",
      "label": "Exhaust Fan Speed (During Print)",
      "type": "number",
      "category": "chamber",
      "description": "Exhaust fan speed during printing",
      "unit": "%",
      "min": 0,
      "max": 100
    },
    {
      "key": "complete_print_exhaust_fan_speed",
      "label": "Exhaust Fan Speed (After Print)",
      "type": "number",
      "category": "chamber",
      "description": "Exhaust fan speed after print completes",
      "unit": "%",
      "min": 0,
      "max": 100
    },
    {
      "key": "activate_chamber_temp_control",
      "label": "Chamber Temp Control",
      "type": "boolean",
      "category": "chamber",
      "description": "Enable active chamber temperature control"
    },
    {
      "key": "chamber_temperature",
      "label": "Chamber Temperature",
      "type": "number",
      "category": "chamber",
      "description": "Target chamber temperature",
      "unit": "°C",
      "min": 0,
      "max": 60
    },
    {
      "key": "filament_retraction_length",
      "label": "Retraction Length",
      "type": "number",
      "category": "retraction",
      "description": "Length of filament to retract",
      "unit": "mm",
      "step": 0.1,
      "min": 0,
      "max": 10
    },
    {
      "key": "filament_retract_before_wipe",
      "label": "Retract Before Wipe",
      "type": "number",
      "category": "retraction",
      "description": "Percentage of retraction before wipe",
      "unit": "%",
      "min": 0,
      "max": 100
    },
    {
      "key": "filament_retraction_speed",
      "label": "Retraction Speed",
      "type": "number",
      "category": "retraction",
      "description": "Speed for retraction moves",
      "unit": "mm/s",
      "min": 10,
      "max": 120
    },
    {
      "key": "filament_deretraction_speed",
      "label": "Deretraction Speed",
      "type": "number",
      "category": "retraction",
      "description": "Speed for priming after retraction",
      "unit": "mm/s",
      "min": 10,
      "max": 120
    },
    {
      "key": "filament_retract_restart_extra",
      "label": "Extra Length on Restart",
      "type": "number",
      "category": "retraction",
      "description": "Extra filament to prime after retraction",
      "unit": "mm",
      "step": 0.01
    },
    {
      "key": "filament_retract_when_changing_layer",
      "label": "Retract on Layer Change",
      "type": "boolean",
      "category": "retraction",
      "description": "Force retraction when changing layers"
    },
    {
      "key": "filament_wipe",
      "label": "Enable Wipe",
      "type": "boolean",
      "category": "retraction",
      "description": "Enable nozzle wipe during retraction"
    },
    {
      "key": "filament_wipe_distance",
      "label": "Wipe Distance",
      "type": "number",
      "category": "retraction",
      "description": "Distance to wipe while retracting",
      "unit": "mm",
      "step": 0.1
    },
    {
      "key": "filament_z_hop",
      "label": "Z Hop Height",
      "type": "number",
      "category": "retraction",
      "description": "Lift height during travel moves",
      "unit": "mm",
      "step": 0.1,
      "min": 0,
      "max": 2
    },
    {
      "key": "filament_z_hop_types",
      "label": "Z Hop Type",
      "type": "select",
      "category": "retraction",
      "description": "Type of Z hop motion",
      "options": [
        {"value": "Normal Lift", "label": "Normal Lift"},
        {"value": "Slope Lift", "label": "Slope Lift"},
        {"value": "Spiral Lift", "label": "Spiral Lift"}
      ]
    },
    {
      "key": "filament_retraction_minimum_travel",
      "label": "Min Travel After Retraction",
      "type": "number",
      "category": "retraction",
      "description": "Minimum travel distance to trigger retraction",
      "unit": "mm",
      "step": 0.1
    },
    {
      "key": "filament_retract_layer_change",
      "label": "Retract on Layer Change",
      "type": "boolean",
      "category": "retraction",
      "description": "Retract when layer changes"
    },
    {
      "key": "filament_colour",
      "label": "Filament Color",
      "type": "text",
      "category": "appearance",
      "description": "Filament color (hex format #RRGGBB)"
    },
    {
      "key": "default_filament_colour",
      "label": "Default Filament Color",
      "type": "text",
      "category": "appearance",
      "description": "Default color for this filament type"
    },
    {
      "key": "filament_is_support",
      "label": "Is Support Material",
      "type": "boolean",
      "category": "advanced",
      "description": "Mark as support material filament"
    },
    {
      "key": "filament_soluble",
      "label": "Soluble Material",
      "type": "boolean",
      "category": "advanced",
      "description": "Material dissolves in liquid"
    },
    {
      "key": "required_nozzle_HRC",
      "label": "Required Nozzle HRC",
      "type": "number",
      "category": "advanced",
      "description": "Minimum nozzle hardness required",
      "min": 0,
      "max": 100
    },
    {
      "key": "filament_start_gcode",
      "label": "Filament Start G-code",
      "type": "text",
      "category": "gcode",
      "description": "G-code executed when switching to this filament"
    },
    {
      "key": "filament_end_gcode",
      "label": "Filament End G-code",
      "type": "text",
      "category": "gcode",
      "description": "G-code executed when switching from this filament"
    },
    {
      "key": "filament_loading_speed",
      "label": "Loading Speed",
      "type": "number",
      "category": "ams",
      "description": "Speed for loading filament",
      "unit": "mm/s"
    },
    {
      "key": "filament_loading_speed_start",
      "label": "Loading Start Speed",
      "type": "number",
      "category": "ams",
      "description": "Initial speed when loading filament",
      "unit": "mm/s"
    },
    {
      "key": "filament_unloading_speed",
      "label": "Unloading Speed",
      "type": "number",
      "category": "ams",
      "description": "Speed for unloading filament",
      "unit": "mm/s"
    },
    {
      "key": "filament_unloading_speed_start",
      "label": "Unloading Start Speed",
      "type": "number",
      "category": "ams",
      "description": "Initial speed when unloading filament",
      "unit": "mm/s"
    },
    {
      "key": "filament_toolchange_delay",
      "label": "Toolchange Delay",
      "type": "number",
      "category": "ams",
      "description": "Delay after tool change",
      "unit": "s"
    },
    {
      "key": "filament_cooling_moves",
      "label": "Cooling Moves",
      "type": "number",
      "category": "ams",
      "description": "Number of cooling moves during unload"
    },
    {
      "key": "filament_cooling_initial_speed",
      "label": "Cooling Initial Speed",
      "type": "number",
      "category": "ams",
      "description": "Initial speed for tip shaping cooling moves",
      "unit": "mm/s"
    },
    {
      "key": "filament_cooling_final_speed",
      "label": "Cooling Final Speed",
      "type": "number",
      "category": "ams",
      "description": "Final speed for tip shaping cooling moves",
      "unit": "mm/s"
    },
    {
      "key": "filament_ramming_parameters",
      "label": "Ramming Parameters",
      "type": "text",
      "category": "ams",
      "description": "Ramming sequence parameters"
    },
    {
      "key": "filament_minimal_purge_on_wipe_tower",
      "label": "Min Purge on Wipe Tower",
      "type": "number",
      "category": "ams",
      "description": "Minimum purge volume on wipe tower",
      "unit": "mm³"
    },
    {
      "key": "filament_multitool_ramming",
      "label": "Multitool Ramming",
      "type": "boolean",
      "category": "ams",
      "description": "Enable ramming for multi-tool"
    },
    {
      "key": "filament_multitool_ramming_volume",
      "label": "Multitool Ramming Volume",
      "type": "number",
      "category": "ams",
      "description": "Volume to ram during multi-tool change",
      "unit": "mm³"
    },
    {
      "key": "filament_multitool_ramming_flow",
      "label": "Multitool Ramming Flow",
      "type": "number",
      "category": "ams",
      "description": "Flow rate during multi-tool ramming",
      "unit": "mm³/s"
    },
    {
      "key": "filament_long_retractions_when_cut",
      "label": "Long Retractions When Cut",
      "type": "boolean",
      "category": "ams",
      "description": "Use long retraction when cutting filament"
    },
    {
      "key": "filament_retraction_distances_when_cut",
      "label": "Retraction Distance When Cut",
      "type": "text",
      "category": "ams",
      "description": "Retraction distance during filament cut"
    }
  ]
}