# Changelog

All notable changes to Bambuddy will be documented in this file.

## [1.3.0] - 2026-10-06

### Added
- **OctoEverywhere AI failure detection (#3169, requested and contributed by @QuinnDamerell in #3428)** — AI Failure Detection gets a second provider next to self-hosted Obico: OctoEverywhere's cloud AI, with a free Gadget API key and no ML container to run. Pick it under **Settings > Failure Detection > Provider**. Camera snapshots of running prints are sent to OctoEverywhere, which returns a print quality and suggests a warning or a pause; Bambuddy then notifies, pauses the print, or pauses and turns off the printer's smart plug, as for Obico. **Confidence** (Lowest to Highest) trades early alerts against false alarms, and the **Inspection interval** runs from 5 to 30 seconds. While a failure is still detected, the notification repeats every 3 hours; a pause or power-off happens once. Usage limits and key problems show in the settings with a link to fix them. The AI Failure Detection notification now names the provider, with `{provider}` and `{print_quality}` for templates. Wiki updated.
- **Custom label sheets and saved label templates (#3296, requested and contributed by @koshilki in #3385)** — The label size list in **Print spool labels** has a **Custom sheet…** entry for a sheet none of the built-in templates match: page (A4 or US Letter), label size, columns and rows, margins and gaps. A drawing of the sheet to scale follows the numbers, labels that would run off the page are drawn red with the reason, and printing waits until the layout fits. A custom sheet can be saved under a name and is then listed under **Saved templates** for everyone on the install, to edit or delete later (saving, editing and deleting need the inventory update permission). Works for built-in inventory and Spoolman alike; the built-in sheets print exactly where they did.
- **Polish (#3303, requested by @lukg20)** — The interface is available in Polish (Polski), chosen in **Settings > General > Language**. Counts are written in forms that read correctly for any number, since the interface can't tell Polish's three plural forms apart.
- **Each archive opens with all its prints** — An archive is one file, but everything about its prints sat on one card: its latest print's outcome, one video, one note. A click on a card (or its name in the list) now opens the archive over the list, at `/archives/<id>` so a link to it works; Escape or a click outside it closes it:
  - **The file:** thumbnail (larger on hover), what it was sliced for (printer, nozzle, bed type), its project, how often it was printed (good and failed) and the slicer's estimate for the whole file, the archive's note, and **Print** (a sliced file; a source file offers **Slice** only), **Slice**, **Edit** and a menu with **3D preview**, **Download**, **All photos** and **Delete**. A **File** section below lists layer height, nozzle, bed type, layers, size, when it was archived, its MakerWorld source and tags.
  - **Plates:** each plate of a multi-plate file with its objects, estimate, filaments, how often it printed good and failed and how far its last print ran from the estimate, its prints' finish photos and newest timelapse video, with **Print this plate** and **Show its prints**.
  - **Every print of it,** newest first, as a table (date, plate, printer, outcome, time against the plate's estimate, filament, cost, filament as colour dots and its types) that can be narrowed to one plate. A click opens a print: its photos and timelapse video (a print from before prints kept their own shows the archive's photos no other print holds), start and end, energy, failure reason, who started it, its own note, its own verdict (**Set outcome** answers for that print only) and **Reprint this print**. Each plate keeps its own video.
  - **Calendar by print:** the calendar shows each print on the day it ended, so a file printed three times this month is there three times, and a click opens the archive at that print. With a printer picked it shows only the prints on it. Its labels are now translated.
  - **Print Log:** a print's name opens its archive at that print, unless the archive was deleted. The orange **N prints** badge opens the archive too.
  - **Filters by print:** the printer filter (in search too) finds archives with any print on that printer, not only the latest, and their print counts are of the prints on it; **Failed Prints** finds archives any print of which failed or was aborted. Aborted prints now count as failed in an archive's print counts. A link to a merged archive opens the archive it went into. Wiki updated.
- **Slice dialog: sorted presets, search, stock presets listed once** - Preset groups are sorted (decimals by value), every preset dropdown has a search, and a Bambu stock preset that Bambu Cloud and the bundled Standard profiles both list appears once, as the Bambu Cloud copy. Pipelines and saved AMS slot presets that name the hidden Standard copy use the cloud one. Requested in #3386, built by @pleasantone in #3393.
- **SpoolBuddy: add a scanned Bambu spool in one tap** - When an unknown Bambu Lab spool is placed on the SpoolBuddy reader, the card now shows the material, colour and weight decoded from its RFID tag, and Quick Add creates the spool with them (tray UUID and tare included) instead of a blank PLA spool. A failed re-read of the same tag keeps the data from the good read. Requested by @BenBBSLA in #2685, built by @hibikipr in #3390.
- **`DB_POOL_PRE_PING` to turn off the PostgreSQL connection check (#3396, requested and contributed by @oh-forf in #3413)** — Every pooled PostgreSQL session first checks its connection, and SQLAlchemy wraps that check in an empty `BEGIN; ROLLBACK;`. On a small install that made `pg_stat_database` show around 80% rolled-back transactions and set off rollback-ratio alerts in monitoring. `DB_POOL_PRE_PING=false` skips the check and roughly halves the rollback count. The default stays on: with it off, a connection the server dropped fails the first request that uses it, so turn it off only for a database on the same host or LAN.
- **Move a folder in the File Manager (#3305, requested and contributed by @rojosinalma in #3306)** — A folder could not be moved once created, only rebuilt elsewhere by hand. It can now go to the root or into another folder.
  - **Move folder…** in a folder's menu, in the sidebar tree and the columns view, opens the same picker as **Move files**, with **Root** on top. The folder itself, its subfolders, external folders and folders you can't write to are greyed out, and the current parent is marked.
  - **Drag and drop:** drag a folder onto another folder, onto a column's empty space, or onto **All Files** for the root. A drop that would change nothing or isn't allowed shows no-drop and sends nothing. Dragging files to upload works as before.
  - **On the server:** external folders can't be moved, nothing can be moved into one, and a destination that doesn't exist is refused, so an API call can't do what the File Manager doesn't offer.
- **SpoolBuddy sends a Bambu tag's data with each scan (#2685, contributed by @hibikipr in #3389)** — A scan of a Bambu Lab tag sent only its tray UUID. The daemon now also reads block 6 (drying and nozzle temperatures) and sends the tag's data blocks (material, type, colour, weight, temperatures) along with the scan, for Bambuddy to decode. A Bambuddy that doesn't know them yet ignores them.
- **Assign a spool by scanning its QR label (#1574, requested and contributed by @samedyuksel in #1606)** — Putting a spool into an AMS slot or away into storage meant finding it in a list. Its label's QR code can now be scanned with the phone or tablet camera instead.
  - **Assign by QR:** a new button on the **Inventory** page and on SpoolBuddy's Inventory page. Pick an AMS slot or a storage location, then scan the spool. A spool scanned into a slot leaves the slot it was in, in the same save, so a failed move leaves it where it was. A spool scanned into storage gets that location, as the Locations filter shows it.
  - **From the Assign Spool dialog:** **Scan a spool QR** next to the spool list assigns the scanned spool to the slot the dialog was opened for.
  - **Same checks as picking by hand:** an archived or missing spool says so, a spool of another material asks first (unless filament warnings are off), and an empty slot says it will be set up when the spool goes in. Both inventory modes. Spoolman labels are read as Spoolman spools.
  - **Camera:** the live view needs Bambuddy opened over HTTPS (e.g. behind a reverse proxy). Over plain HTTP, or where no camera can be opened, **Take photo** uses the phone's own camera. Photos are read in the browser and never uploaded.
  - **Also fixed on the way:** assigning a spool to an empty slot no longer asks whether it matches the tray material "".
- **P2S printers show a P2S picture (#3366, requested and contributed by @andy-sorge in #3369)** — P2S printers were shown with the P1S picture. They now have their own.
- **Remaining time instead of percentage in the browser tab (#3266, requested and contributed by @bgrr74 in #3283)** — With "Print progress in tab" on, the tab showed only the soonest-finishing print's percentage, and 95% of a 10-hour print is not 95% of a 15-minute one. Under **Settings → Appearance**, **Tab display** now switches the title between **Percentage** (default) and **Time remaining**, e.g. `1h 26m · Bambuddy`. Until the printer reports a remaining time, the title shows the percentage. The favicon ring keeps showing the percentage. Stored per browser, like the toggle itself. Wiki updated.
- **New spools start with their product's presets and K profiles (#1326, requested by @mithkr)** — The slicer preset, the presets per printer model and the K profiles were set per spool, so every replacement for an empty spool had to be set up again by hand. They can now be saved once per product, as a profile default, and every new spool of that product starts with them.
  - **Saving one:** set up a spool's Printers tab, tick **Save as default for new … spools** below it and save the spool. **All colours** is preselected; **Only <colour>** saves one for a colour calibrated on its own. A colour's default wins over the all-colours one per preset and per hotend, so the first spool of a new colour still gets the product's K profiles. Saving again replaces the default.
  - **Every way a spool is added gets it:** the spool form, Quick Add, bulk add, RFID auto-add and **Add to Inventory**, SpoolBuddy and a forecast reorder, in both inventory modes, including spools the AMS sync adds to Spoolman. The spool form fills its Printers tab in from the default as soon as the product is filled in, and shows it. Elsewhere only what the new spool doesn't have yet is filled in, so an RFID spool keeps the preset on its tag.
  - **Existing stock:** **Settings → Filament → Profile defaults** lists the defaults, deletes them, and **Apply to existing spools** fills in what active spools of a product don't have yet, never changing what they have. A default is copied onto a spool, not linked, so changing it later leaves existing spools alone.
  - **Also fixed on the way:** adding several Spoolman spools at once dropped their slicer preset and colour name; each copy now gets both, as a single add does. Creating a spool through the form or SpoolBuddy without picking a K profile no longer saves an empty list over what the create gave it. A user limited to some printers who saves a spool's K profiles now replaces only those printers' profiles; the other printers' profiles stay, where the save used to delete them. Wiki updated.
- **Time to the next pause, and a heads-up before it (#2984, requested by @apizz)** — A pause added in the slicer, for an NFC chip, a magnet or threaded inserts, came without warning: the only way to be there for it was to look up its layer in the slicer and keep checking the layer count.
  - **On the printer card:** next to the ETA, in blue, the time until the next pause and its clock time, e.g. "20m to pause · 20:27". Hover it for the layer. With several pauses it counts down to each in turn. Sizes M and up; the one-line size S card has no room for it. In a speed mode other than Standard it shows the layer only, as the slicer's times are for Standard speed.
  - **Pause Coming Up notification:** a new event for notification channels, sent once per pause, 5 minutes before by default (at Standard speed). Set the minutes under Settings > Notifications > **Pause Heads-Up** (1-120). Off on every channel until turned on, with its own template.
  - **Where it comes from:** the pauses are read from the print's G-code in its archived 3MF, written there by Bambu Studio and OrcaSlicer. Prints without an archived 3MF show none. Wiki updated.
- **Printer cameras from any page (#2737, requested by @apizz)** — An embedded camera overlay belonged to the Printers page: it disappeared on every other page and came back only on returning there, so a quick look at a print meant leaving the page you were on.
  - **On every page:** open overlays now stay open as you move around Bambuddy, and still reopen after a reload.
  - **Cameras button:** a camera icon at the end of the sidebar's **Printers** row (on hover when the sidebar is collapsed), in the header on narrow screens, or the **C** key, lists the printers you can see and opens one as an overlay. A camera already open is ticked and closes from the same list. Users without `camera:view` and `printers:read` don't see it, or any overlay.
  - **Pop out and back in:** a new button in the overlay moves the camera into its own window. The camera window has a button that moves it back as an overlay into the Bambuddy tab it came from, or another open one whose user can see that printer, and closes. With no Bambuddy tab open, the window stays and says so.
  - Overlays left open for a deleted printer, or one the signed-in user can't see, are dropped. Wiki updated.
- **Dominican Peso (DOP) as a currency (#3388, requested by @rogerabm)** — Costs can now be shown in Dominican Pesos (RD$). Pick it under Settings > General > Cost Tracking.
- **Egyptian Pound (EGP) as a currency (#3334, requested by @aammash)** — Costs can now be shown in Egyptian Pounds (E£). Pick it under Settings > General > Cost Tracking.
- **Larger queue thumbnails on hover (#3313, requested by @humplemann)** — A job's thumbnail on a **Queue** card is the quickest way to tell jobs apart, but it is small. Hovering it now shows it at 256x256 next to the card, as the **History** rows already did at 192x192 (now 256x256 too). The preview opens to the left when there is no room on the right, is no longer cut off inside a batch group, and closes when you move away or scroll. Desktop only, as touch screens have no hover. Wiki updated.
- **The queue says when a job printed in a colour the file didn't ask for (#3279, requested by @Lioncat55)** — With no spool of a slot's colour loaded, the queue can still send the job with another spool of the same material. Nothing showed this until the print came out.
  - **On the queue row:** an amber line per slot, for example "Slot 1 printed in Black (#000000), the file asks for Silver (#A4AAAC)". It stays on the job in **History**.
  - **When:** worked out each time the job is sent, from the spool each slot is sent with, whether the queue picked it or it was picked by hand. A similar colour doesn't count, and a colour changed on purpose with a filament override isn't reported.
  - **To have the queue wait** for a spool of the file's colour instead of using another one, turn on **Force color match**.
  - **Only for prints that started:** a send that goes back to the queue or fails before the print starts carries no note.
- **A count on an app's sidebar link** — An app added to the sidebar can show a number on its link, the way the print queue shows how many jobs wait: Bambuddy Orders shows how many orders and top-ups wait in its To do. The app reports the count for its own address with an API key that has **Send notifications** (`PUT /api/v1/external-links/badge`); the link must point at that address. A count not updated for ten minutes disappears, so an app that stopped doesn't leave an old number. Wiki updated.
- **USB cameras are picked from a list** — With an external camera set to **USB Camera (V4L2)**, Settings > Camera now lists the video devices the Bambuddy server can see, by name and path (`HD Pro Webcam C920 (/dev/video0)`), instead of asking for the device path. A refresh button looks again after a camera is plugged in, and a saved camera that is unplugged stays selected, marked **not found**. When no device is visible, the list says how to pass a camera to the Docker container. **Enter path manually** still takes a typed path. Looking for devices no longer holds up the server while it runs.
- **The MQTT relay publishes printer offline/online and low filament** — Three new topics for Home Assistant, Node-RED and other subscribers. `printers/{serial}/offline` is sent once a printer has been disconnected for a minute, and `printers/{serial}/online` when it comes back after that, so a short blip sends neither. `printers/{serial}/filament/low` is sent once when the spool in an AMS slot drops below its low-stock threshold, at the same moment as the Low Filament notification, and works even when no notification provider has that event switched on. Wiki updated with the payloads.
- **Notify! notification provider with iOS Live Activities and Lock Screen widgets (#2919, requested and contributed by @simplytoast1 in #3265)** — Notify! used to need the separate notify-bambuddy companion container. Bambuddy now talks to it directly: add a provider of type Notify! with the device ID and token.
  - **Alerts:** the usual events, printer filter, quiet hours and daily digest apply as for every provider, with the camera photo attached. Each printer gets its own notification thread. **Time Sensitive problem alerts** sends failures, stops, printer errors and failure detection as time-sensitive notifications.
  - **Live Activities:** with **Live Activities (iOS)** on, each running print shows a tile on the Lock Screen with a countdown to the end. A fault, a pause, running out of filament or a lost connection replaces the countdown with the problem. Progress style, extra values (progress, ETA, layer, temperatures), print stage, a privacy mode that hides the file name, symbol, colour and a button that opens Bambuddy can be set under **Live Activity appearance**. A dismissed tile stays dismissed for that print, and tiles survive a Bambuddy restart.
  - **Lock Screen widgets:** with **Lock Screen Widgets (iOS)** on, each active printer gets a widget showing its status and progress, added through iOS's Lock Screen customisation. iOS refreshes widgets on its own schedule, roughly every 15 minutes. Notify! allows ten widgets per device, so **All printers** creates at most ten.
  - **Browser and group recipients** (IDs starting with `WB` or `GRP`) get text alerts only, without photos, Live Activities or widgets. Mac recipients (`MC`) get alerts with photos, but no Live Activities or widgets.
  - **Nothing runs until it's used:** without a Notify! provider the background workers stay idle. Stop the companion container before turning on Live Activities here, or each print gets two tiles.
- **Spoolman mode uses Spoolman 0.27's native tags (#3168, requested and contributed by @Niko11111 in #3252)** — Spoolman 0.27 links NFC tags to spools itself: a spool can hold several tags, and Spoolman makes sure no two spools share one. Bambuddy kept its single tag per spool in its own `extra.tag` field, so neither side saw the other's links, a Bambu spool could hold only one of its identifiers, and every SpoolBuddy scan loaded the whole inventory.
  - **Faster scans:** on Spoolman 0.27 or later, a scan asks Spoolman for the tag directly instead of loading every spool (17 ms instead of 88 ms on a 278-spool install). The old lookup is kept as a fallback for spools linked before.
  - **Tags collect themselves:** a spool found by a scan or an AMS read gets what was read added to its tags. A Bambu spool collects its tray UUID and the chip UID of each side over time. The AMS also finds a spool linked by its chip alone.
  - **Linking adds instead of replacing:** linking, unlinking, **Clear RFID Tag** and writing a tag with SpoolBuddy keep Spoolman's tags in step. A tag another active spool holds is refused as before. A tag still held by an archived spool, which is used up or replaced, moves to the active one.
  - **Copying existing tags:** when Spoolman supports native tags, **Settings → Filament** shows a **Spoolman native tags** section. **Check tags** shows what would be copied and any conflicts, and **Copy tags** copies the tags. Archived spools and AMS slot IDs are left out, and a tag another active spool holds is reported, never moved.
  - **Nothing lost on older versions:** `extra.tag` is still written everywhere, so readers that only know it and a downgrade to an older Spoolman lose nothing. Older Spoolman versions behave as before.
- **Each spool remembers when it was last dried (#2863, requested by @USER19464727)** — The AMS humidity describes the unit, not the spool, so once a spool left the AMS there was no telling whether it had been dried.
  - **Filled in by AMS drying:** when an AMS drying run ends, every spool assigned to a slot of that AMS is marked with the date, the temperature (for runs Bambuddy started; the printer doesn't report it) and how long the run actually lasted.
  - **Only real drying counts:** the run must have lasted at least half its length. One stopped before then, from Bambuddy, on the printer or because a print took priority, leaves the earlier record alone.
  - **Where it shows:** a **Last dried** column in the inventory table, visible by default and sortable, and a line on the spool card. **Group similar** keeps a dried spool apart from undried copies of it.
  - **Set by hand:** **Last dried** in the spool form (**Color & Cost**, when editing) takes a date or **Now** for a spool dried in an external dryer, and clearing it removes the record.
  - **Spoolman too:** in Spoolman mode the record is kept in three extra fields on the spool. Git backups carry it as well. Wiki updated.
- **Failure detection can send Obico a different Bambuddy address from External URL (#3235, requested and contributed by @chrisbennight in #3255)** — Obico's ML server fetches each snapshot from Bambuddy itself, and the only address Bambuddy could give it was **External URL**. When that is a public address behind a reverse proxy with its own login, the ML server can't get through, and detection reports a snapshot error on every check.
  - **The new setting:** **Settings → Failure Detection** has an optional **Bambuddy Internal URL**, used only for those snapshots. Point it at an address the ML server reaches directly, such as a Docker service name (`http://bambuddy:8000`) or a LAN address. Notifications, sign-in redirects and the other integrations keep using External URL.
  - **Empty uses External URL,** so nothing changes until you set it, and clearing it goes back to External URL.
  - **Checked on save:** the address must be a full `http://` or `https://` address. The field says so while it isn't, and the other Failure Detection settings still save in the meantime.
  - **The warning shown when neither address is set** now reads "No address set for the ML API to fetch snapshots from" and names both settings.
- **Gotify notification provider (#2743, requested by @MrCrunshy)** — Notifications can now go to your own Gotify server. Add a provider of type Gotify with the server URL and an application token; the token travels in a header, never in the URL.
  - **Per-event priority:** like ntfy, each enabled event can be set to Min, Low, Default, High or Urgent, sent to Gotify as 0, 2, 5, 8 and 10. Events left at Default go out at 5, which plays a sound in the Gotify Android app.
  - **Photo and tap action:** with External URL set, the camera snapshot shows as a large picture in the Android app, and tapping the outcome-confirmation notification opens the outcome dialog in Bambuddy.
- **The Cam Wall's tiles can be resized with the S / M / L / XL selector (#2735, requested by @cmerkle)** — The size selector on the Printers page used to grey out on the Cam Wall, and the tiles always sat up to four in a row, so a setup with two printers got two small tiles side by side.
  - **On the Printers page:** while the Cam Wall is showing, the selector sizes the tiles: S fits up to five per row on a wide screen, M four (as before, and still the default), L two, and XL one tile across the full width. Tiles keep their 16:9 shape.
  - **Remembered on its own:** the Cam Wall keeps its own size, so changing it leaves the card size alone, and the other way round.
  - **On `/camwall`:** the standalone page uses the size last picked on the Printers page, and a kiosk URL can set it with `size=s`, `m`, `l` or `xl`.
- **Printers can have a wear cost per printing hour, added to what each print costs (#694, requested by @wreuel)** — Print costs covered filament and energy, but not the printer itself: nozzles, belts, the hotend and eventually the machine. Print farms and anyone selling prints usually add an hourly amount for that.
  - **Setting it:** **Edit printer** has a new optional field, **Wear cost per printing hour**, for example 0.20 for a 600 printer you expect to last 3,000 hours. Empty or 0 leaves it off, so nothing changes until you set one.
  - **How it's costed:** each print's duration as shown in the Print Log, times the printer's rate. Failed and cancelled prints count, because they wore the printer too. A print closed after Bambuddy was offline has no known duration and gets none. The rate applies from the next print on and never rewrites earlier ones.
  - **Where it shows:** a third amount with a wrench icon on the archive card (the first print, like energy), a **Wear Cost** column in the Print Log (hidden by default, sortable), a **Wear Cost** tile in Quick Stats once there is any, the **Most Expensive** record, project totals and budgets, and the measured cost of batch orders.
  - **Billing is unchanged:** charges stay filament only.
- **The Slice dialog offers OrcaSlicer's built-in third-party filaments, and every other filament the slicer ships for Bambu printers (#3234, requested by @nvx)** — The **Standard** tier listed only part of the slicer's own presets. Two gaps, both in the slicer sidecar, which needs the updated image:
  - **OrcaSlicer's filament library was never read.** OrcaSlicer ships filaments that suit any printer (Elegoo, PolyLite, COEX and more, named `... @System`) in a folder next to the Bambu one. With the OrcaSlicer sidecar, the 264 of them that a Bambu printer can use are now listed. As in OrcaSlicer, each is offered on every Bambu printer except those with a filament made for that printer, so `Generic PLA @System` doesn't show on an X1 Carbon, which has `Generic PLA @BBL X1C`.
  - **Filaments in brand folders were missing.** Both slicers keep many Bambu-printer filaments in subfolders (`COEX PLA @BBL X1C`, `SUNLU PLA Matte @BBL X1C`, ...). The sidecar read only the top folder: OrcaSlicer 2.4.2 now lists 1997 Bambu filaments instead of 1156, Bambu Studio 02.08.02.61 1928 instead of 1792.
  - **The automatic pick prefers Bambu's own presets, and real filament over support.** When several presets fit a plate equally well, the Slice dialog takes the first in the list. The sidecar now lists, within the slicer's own presets and within the library: real filaments before support materials, then Bambu Lab, then Generic, then other brands. A PLA plate on an X1 Carbon still gets `Bambu PLA Basic @BBL X1C` rather than the alphabetically first `addnorth PLA`. A PA plate now gets `Generic PA` instead of `Bambu Support For PA/PET`, which states PA and used to win alphabetically. A P1P plate gets `Bambu ABS @BBL P1P` and `Bambu PLA Basic @BBL P1P` instead of a support or special-edition preset. HIPS still gets Bambu's `Generic HIPS`.
  - **No preset of the plate's material:** the Slice dialog's last fallback picked a preset of another material without looking at the printer, so it could choose one the slicer then refused. It now prefers one for the selected printer.
  - **Your own presets now slice with the settings they are based on.** A preset you saved in Bambu Studio or OrcaSlicer stores only your changes, and the sidecar fills in the rest from the preset it is based on. When that parent sat in a subfolder or had a `/` in its name, it wasn't found, and the slice ran on the slicer's defaults with only your changes applied. This hit every custom preset based on a P1P filament (Bambu Studio keeps all 67 in `filament/P1P/`), on SUNLU, Polymaker and other brand filaments, on `Bambu Support For PLA/PETG`, and on OrcaSlicer library filaments. Bambuddy's "unresolved preset" warning fired on those slices. Verified with a custom `Bambu PLA Basic @BBL P1P`: 3 settings before, all 140 now. The newly listed built-in presets resolve the same way: `Elegoo PLA @System` slices at its 210 °C, `COEX PETG @BBL X1C` at 245 °C.
  - **Why the reporter's Orca Cloud didn't help:** OrcaSlicer uploads only presets you created yourself. Ticking a built-in filament in OrcaSlicer only shows it locally, so it never reached Orca Cloud. The wiki says so now.
- **Users who see only their own files now see only their own folders, and admins can share a folder with everyone (#3201, requested by @Minebuddy)** — Library files had an owner but folders did not, so a user with **View own library files** saw every folder anyone had made: a school with 100 student accounts showed each student every other student's folders, most of them looking empty, and offered them all as places to upload. Folders now have an owner, the user who made them.
  - **What a user sees:** their own folders, folders shared with everyone, folders holding one of their files, and the folders above those, so they can reach them. Users with **View all library files** still see everything.
  - **Sharing:** an admin (**Update all library files**) can mark a folder **Share with everyone** in its menu. A shared folder shows a people icon, everyone sees it and can add files and subfolders to it. Sharing applies to that folder, not to the folders inside it.
  - **Adding files:** uploads, ZIP extraction, moving files, new subfolders and MakerWorld or Manyfold imports go only into your own folders, shared ones and the top level. A ZIP whose name matches someone else's folder now gets its own folder instead of landing in theirs.
  - **Renaming and deleting:** with **Update own library files** you can rename and move your own folders; linking and sharing stay with **Update all**. With **Delete own library files** you can delete your own folder when everything in it is yours. An empty folder without an owner can still be deleted as before.
  - **Counts:** a folder's file count and last-activity time now count only the files you can see; they used to reveal other users' files (reported by @lonix).
  - **Existing folders:** on upgrade, a folder whose files all belong to one user becomes that user's folder, and an empty folder inside it goes with it. Every other folder (empty, used by several people, linked to a project, external, or the MakerWorld and Manyfold import folders) is shared, so it stays visible as before. Folders made while auth is off, and new external folders, are shared too, so turning auth on later hides nothing.
- **The electricity price can come from a Home Assistant sensor, and energy is costed at the price of the hour it was used (#1251, requested by @Roving-Ronin)** — With a tariff that changes during the day, such as Amber in Australia or Nord Pool and Tibber in Europe, there was no way to get the right energy cost. Bambuddy kept one price and applied it after the fact: a print was costed at the price when it finished, and in **Total consumption** mode every kWh on the Statistics page, past months included, was multiplied by today's price. So the all-time energy cost moved every time the price did. Pushing the price in from Home Assistant through the API kept that one price current, but the arithmetic stayed wrong.
  - **Price from Home Assistant:** under **Settings → General → Cost Tracking**, **Electricity price source** can now be set to **Home Assistant sensor** and pointed at a price sensor. Bambuddy reads it when you save, every hour, and at the start and end of each print. Prices per MWh and per Wh are converted to per kWh. If Home Assistant can't be reached, the last price read is used. The push through the API still works.
  - **Costed hour by hour:** each hourly energy reading now records the price, and the energy used until the next reading is costed at it. A print that runs through cheap and expensive hours is costed at each, and the Statistics energy cost does the same for any date range and for all time.
  - **A new price applies from then on:** changing the price no longer re-costs history, so a new contract doesn't change last year's figures. Readings taken before this update keep the price that was set when you upgraded.
- **The Slice dialog can list only the printers that are online and the spools loaded in them (#3172, requested by @wolfrage76)** — The person slicing is often not at the printer, and the useful filaments are the ones already loaded, because those are what a remote print can start on. The Slice dialog listed every printer profile and every filament profile, so you had to know or walk over to check what was in the AMS. Two checkboxes above the printer profile now narrow the lists. Both are off until you turn them on, and the browser remembers them.
  - **Only printers that are online:** the printer profiles of the models connected right now, at every nozzle size. A profile Bambuddy picked for an offline model moves to an online one. One you picked yourself stays.
  - **Only spools that are loaded:** each filament row lists the profiles of the spools in the online printers of the selected model, and its automatic pick is made from them. A profile you picked yourself stays.
  - **Pick:** a new button on each filament row opens the loaded spools, one section per printer, laid out like the AMS units with empty slots shown. Clicking a spool sets the row's profile and colour. A spool with no profile for the selected printer is greyed out.
  - **Matching:** a spool uses the profile set for its slot in Bambuddy, or that profile's copy for the selected printer. A spool set up from the slicer or the printer's screen uses its brand text, so Bambu "PLA Basic" finds **Bambu PLA Basic**. Profiles that state another material are never matched.
  - **Never empty:** hidden profiles stay behind **Show all**, in a **Not online** or **Not loaded** group. With nothing online or nothing matching, the full lists are shown.
  - **Access:** the checkboxes appear only for users who may see printer status, and list only the printers they have access to.
- **Browse your Manyfold library in Bambuddy and import its files (#1471, requested by @hibikipr)** — [Manyfold](https://manyfold.app) is a self-hosted library for 3D models. The sidebar entry **MakerWorld** is now **Model Sources**, with a **MakerWorld** tab, which works as before, and a **Manyfold** tab.
  - **Connecting:** in Manyfold, open Settings → API and create an application with the scopes `public` and `read`. Then enter Manyfold's URL and the application's client ID and secret in the Manyfold tab. **Test connection** shows how many models Bambuddy can see. Bambuddy sees the models the application's owner can see in Manyfold, and never writes to Manyfold.
  - **Browsing:** search and page through the models with their previews, and open one to see its description, tags, licence and files.
  - **Importing:** **Import** downloads a 3MF, STL or STEP file into the library, into a **Manyfold** folder or one you pick. From there you slice and print it like any other file. An imported file shows **In library**, with **Show in library** and **Slice**, and importing it again doesn't download it twice. Nothing is copied until you import it.
  - **Several at once:** in a model, tick files or **Select all**, then **Import selected**, or use **Import all**. In the model grid, tick models (or **Select page**); the ticks stay while you page and search, and **Import their files** imports every printable file of those models that isn't in the library yet. Files import one after another, a failure doesn't stop the rest, and a summary says how many were imported, already there or failed.
  - **Permissions:** two new permissions, `manyfold:view` and `manyfold:import`. Existing groups get them once, matching what they have for MakerWorld. Connecting needs `settings:update`. Until Manyfold is connected, only users who can connect it see the tab.
  - **The secret:** the client secret is never sent back to the browser and is left out of GitHub backups.
  - **Old links:** links and bookmarks to `/makerworld` open the MakerWorld tab, and a sidebar you reordered or hid entries in keeps its layout.
- **The chamber light can turn on whenever the camera is used (#1655, requested by @dadino)** — A printer kept dark between uses showed a black live view and sent black photos with its notifications. Settings → Camera has a new **Turn on chamber light for camera** choice: **Off** (the default), **All printers**, or **Selected printers**, picked from a list you can search by name or location.
  - **When it turns on:** while anyone watches the live view, including the camera wall and a streaming overlay, and for automatic pictures: notification photos, the finish photo and the snapshot that Home Assistant and other automations fetch.
  - **When it turns off:** 15 seconds after the last use, so a reconnecting viewer or the camera wall's refresh doesn't make it flash. Bambuddy only turns off a light it turned on: one that was already on stays on, and switching the light by hand on the printer card hands it back to you.
  - **Wait before snapshot** (2 seconds by default, up to 5, for all printers) gives the light, and any light Home Assistant syncs to it, time to come on before an automatic picture. It applies only when the light was off; the live view never waits.
  - **Not included:** the layer timelapse, the Obico check and the frames Bambuddy keeps during a print for the finish photo. They capture all through a print, and the light would flash with every frame.
- **A page for managing printer locations (#2962, requested and contributed by @SVAN19 in #2995)** — Printer locations used to be a free-text field in each printer's settings, so renaming a room meant editing every printer in it, and a typo quietly made a second location. The new **Printer Locations** page, opened from the button next to the sort control on the Printers page, lists every location with its printers and their status. You can create a location before any printer is in it, give it an icon and a colour, rename it, delete it, and move printers between locations one at a time or several at once. Search, sorting and hiding empty locations help on a large farm. Locations are stored by Bambuddy, so every user and every device sees the same ones. Renaming a location also updates queued jobs that target it, so a job waiting for "any X1C in Workshop" still finds its printers after Workshop becomes Garage, and so do the next runs of a batch. Locations typed with stray spaces before are tidied up on upgrade, so "Workshop " and "Workshop" become one. Each change is saved as one step, so a failure cannot leave a location half renamed, and two locations that differ only in upper and lower case are refused. Location names are limited to 100 characters, in the printer dialog too. Changing locations needs the printer edit permission; anyone who can see printers can view the page. Wiki updated. Covered by backend and frontend tests.
- **Groups can limit their members to some printers (#1727, requested by @McGagnor)** — Permissions said what a user may do, but always on every printer, so a shared fleet couldn't be split between teams, and a printer couldn't be kept free for a training session. Printer access now has its own page under **Settings → Authentication → Printer access**. There you limit a group to single printers and to **whole locations**: a location covers every printer in it, including printers added there later. Built for large fleets: search and filter by location, model and access, tick or untick everything the filters leave, see and change it **by group** or **by printer** (who reaches this printer, and which users see every printer because they're in no limited group), and save all changes together. **Who has access** in a printer card's menu opens that view. Because a location now grants access, the printer edit dialog names the groups a move affects, and only an admin can move a printer into or out of a location a limited group has. The **Printer Locations** page keeps to the same rules: renaming a location keeps its groups' access under the new name, deleting or moving printers into or out of a location a limited group has needs an admin, and a user limited to some printers sees only their own locations there. Members of a limited group see and control only its printers: the printer list and dashboard, camera streams, the queue and batches, archives, projects, statistics, print log, pipeline runs, maintenance, smart plugs, spool assignments, scheduled drying, failure detection and firmware all leave the other printers out, live updates stop arriving for them, and asking for one of them, or for an archive or job of theirs, by id answers as if it didn't exist. A user in several limited groups gets all of their printers. Groups without the switch don't limit printers, so they combine with a team group without widening it, and a user who is in no limited group keeps every printer, which means nothing changes until a group is limited. Administrators always see every printer. API keys, camera stream links, Cam Wall and overlay tokens reach only the printers of whoever created them; a key limited to some printers queues to a specific printer rather than to "Any <model>". A queued job only lands on a printer its owner may use: a job for "Any <model>" picks among their printers, a job pinned to a printer that was since taken away from them waits, with that reason on the job, until access returns or it's moved, and deleting a limited user while keeping their items stages their "Any <model>" jobs for a manual start. Editing a system group (Operators, Viewers) no longer fails on save when its permissions weren't changed, and clearing a printer's location in its edit dialog now actually clears it.
- **Jobs can wait for staff review before they print (#1620, requested by @ImNanou)** — In a school or FabLab, students submit jobs and staff decide what actually prints, but anyone who could queue a job could also start it. A new permission, **Print Without Review** (`queue:start_unreviewed`), decides that. A user without it can still queue, but every job they queue waits with a **Waiting for review** badge until someone with `queue:update_all` starts it, and the print dialog tells them so. Users with `queue:update_all` are the reviewers, so their own jobs never wait. They can't start their waiting jobs themselves, nor by switching off manual start in the editor or the bulk editor, and they can't start a virtual printer's ownerless jobs either. Staff editing a waiting job that is scheduled for later doesn't start it. It covers every way a job is queued: the print dialog, the file manager's add to queue, more runs of a batch, pipelines, API keys and the webhook, where a key queues like its owner and a key whose owner needs review can't start waiting jobs. Administrators and Operators have the permission, and on upgrade every group that could queue, start or run jobs gets it once, so nothing changes until an admin takes it away from a group, and a restart doesn't hand it back. Together with the existing "own" read permissions, students then see only their own jobs and files.
- **Your own logo and progress colours on the streaming overlay, and a see-through Version 2 background (#3104, requested and contributed by @adamspicedev in #3208)** — Settings → API Keys → Streaming Overlay has a new **Branding** section below the field checkboxes.
  - **Logo:** upload a PNG or WebP of up to 2 MiB and 4 million pixels, then tick **Custom logo**. It appears above the Bambuddy logo, which stays, in both Classic and Version 2.
    - Bambuddy re-saves the upload as a PNG of at most 512 × 512 that keeps its transparency, and rejects SVG and animated images.
    - There is one logo per installation. After you replace or remove it, refresh the browser sources in OBS.
    - Uploading or removing it needs `settings:update`. OBS loads it with the same Streaming Overlay token as the status feed. Camera stream and Cam Wall tokens can't read it.
    - The logo is included in backup and restore.
  - **Colours:** set **From colour** and **To colour** with the pickers or as six-digit hex codes. The progress bar, the Progress label and the percentage then run from one to the other; set both to the same colour for a solid one. In Version 2 this replaces the colours that change with the printer state, until you click **Reset colours**.
  - **Transparency (Version 2 only):** a **Background transparency** slider from 0 to 100% fades the dark backgrounds, so another OBS source can show through. Text, logos and the camera stay fully visible.
  - **URLs:** the settings are added to the overlay URL as `logo=1`, `progressFrom`, `progressTo` and `backgroundTransparency`. URLs without them look as before.
  - **Preview:** it now waits until you stop dragging a colour picker or the slider before reloading, so it no longer opens a new camera stream on every step.
- **Create a streaming overlay token in the URL builder, or import an existing overlay URL (#3193, requested and contributed by @adamspicedev in #3207)** — Setting up an overlay used to mean creating a token in the Camera Tokens list, copying it, and pasting it into the builder; editing a scene already in OBS meant ticking every setting again by hand. Settings → API Keys → Streaming Overlay now has a **Create overlay token** button that creates a token with the Streaming Overlay scope and puts it straight into the URL. **Existing overlay URL** takes a browser-source URL from OBS and fills in its printer, layout, fields, text size, FPS, artwork, camera, transparency, logo, colours and token. It reads them the same way the overlay page does, ignoring settings it doesn't know, and builds the new URL for this installation, so a URL saved with a LAN IP comes back with the address you are using. The URL is read in the browser and never opened. A URL with more than one token, or with a user name or password in it, is refused without changing anything. A token can still be entered by hand. Tokens stay stored as hashes only, so the server cannot show one again. The builder keeps the token in memory only, shows it as `****` in the URL until you click **Show token**, and forgets it when you leave the page; **Copy** always copies the full URL. The response that returns a new token is no longer cached by the browser. Creating a token in Camera Tokens shows the server's reason again when it fails, for example when the lifetime is too long, and the Camera Tokens and builder forms now fit narrow windows. Wiki updated. Covered by backend and frontend tests.
- **Portrait streaming overlay URLs for Classic and Version 2 (#3185, requested and contributed by @adamspicedev in #3209)** — Settings → API Keys → Streaming Overlay has a new **Layout** choice: **Landscape**, **Portrait** or **Both**. Each layout gets its own URL with Copy and Open buttons, the browser-source size to set in OBS, and its own preview, so **Both** shows the landscape and portrait previews side by side. A portrait URL adds `layout=portrait` and draws a fixed 1080 × 1920 composition that is scaled to fit the browser source, so text, camera and spacing look the same in the preview, in OBS and in a browser tab. Classic gets a portrait arrangement too, with larger text and a wrapping file name. A landscape URL carries no `layout` parameter and looks exactly as before, including Classic's text size in a 1280 × 720 source; Version 2 URLs without `layout` still follow the shape of the browser source. Classic now hides progress, layers, time remaining and temperatures while the printer is offline, as Version 2 already did, and shows "Printer offline" in the status line. **Behaviour change:** Classic no longer adds its own "Printer is idle" or "Printer offline" line below the status; that text now comes only from the **Status** field, so an idle printer no longer shows both "Idle" and "Printer is idle". A Classic URL whose `show=` list leaves out `status` therefore shows no idle or offline text; add `status` to it to get the line back.

### Changed
- **A file printed again adds a run to its archive instead of a duplicate** — Every print of a File Manager or project file from the queue archived the file anew, so a two-plate file printed plate by plate showed two archives of the same file, marked as duplicates of each other. The print now joins the archive the file already has, as a run in its Print Log, when it is the same file, printed by the same user, in the same project, and the archive came from the same File Manager file or from none. The card shows the latest run, with that plate's picture, and the Print Log has a **Plate** column once a run printed a plate other than plate 1; older runs get their plate where the queue still knows it. This also holds while the file prints elsewhere: the same file sent to two printers at once is one archive with two runs. Prints started from the slicer or on the printer, uploads, and existing duplicates are unchanged.
- **The archive export has one row per print** — An archive is a file, and each print of it a run, so the CSV and Excel export now has a row per print: the file's columns (name, file, project, tags, notes, slicer settings) repeated, then that print's own status, printer, plate, times, duration, filament, cost and outcome. New columns: **Print ID**, **Printer**, **Plate**, **Outcome** and **Duration (s)**. An archive printed before prints were logged keeps its one row. The printer, status and date filters pick prints (dates by when the print started), the project and search filters pick archives, and a user limited to some printers gets only the prints on theirs. Spreadsheets built on the old layout need their columns checked.
- **Unused API routes and settings removed** — For anyone calling the API from scripts:
  - **Removed routes:** `POST /printers/test` (it took the access code in the URL; adding a printer tests the connection itself), the two debug routes `POST /printers/{id}/debug/simulate-print-complete` and `GET /printers/{id}/runtime-debug`, and `POST /spoolbuddy/devices/{id}/update-status`, which SpoolBuddy stopped calling when updates moved to SSH.
  - **Old virtual printer settings:** `GET /settings/virtual-printer` now returns only `tailscale_disabled`, `archive_name_source` and `status`, and `GET /settings` no longer lists `virtual_printer_enabled`, `virtual_printer_access_code` and `virtual_printer_mode` (`PUT /settings` ignores them). These settings stopped doing anything when each virtual printer got its own settings; use `/virtual-printers` instead.
- **A grouping that ended in failures is marked failed** — A grouping whose jobs all failed, or failed and were cancelled, with nothing printed, stayed **active** for good, even through the start-up clean-up, and piled up next to real work. It is now marked **failed**, shown in red with a **Failed** filter on the Batches tab, and opens again if a job is added to it. Orders are unchanged: a failed run still leaves an order owing it.
- **Deleting a custom maintenance type says it applies to every printer** — Maintenance types are shared, so deleting a custom one removes it, with its maintenance history, from every printer, including those of other teams when printer access is limited. The confirmation now says so.
- **The web interface downloads about 70% less on each new version (#3175, requested by @mason9468)** — The interface's script files were sent uncompressed and with no caching instructions, so a phone fetched the whole 11 MB again and the browser asked for it on every load.
  - **Compressed:** scripts, styles and other text files under `/assets` now go out gzip-compressed when the browser accepts it. The main script drops from 11.0 MB to 3.0 MB.
  - **Cached for good:** files whose name carries a content hash are now marked as never changing, so the browser loads them from its own cache until an update brings new ones. The page itself is still checked on every load, so updates are picked up as before.
- **The web interface opens faster: pages and languages load when they are needed (#3175, requested by @mason9468)** — Every page and all 15 languages were in one 11 MB script that the browser had to load and run before anything showed, which was slow on phones and in the installed app.
  - **Pages:** each page is now its own file, loaded the first time it is opened. The login page needs 1.2 MB instead of 11 MB, the Printers page 2.8 MB. While a page loads, a spinner shows in the content area and the sidebar stays.
  - **Languages:** only English is built in, as the fallback. The language in use is loaded on start, before the first screen, so a German user never sees English first. Switching language in Settings loads the new one before the switch.
  - **After an update:** a tab left open on the previous version would ask for files the update removed. It now reloads once and continues on the new version. If a file is still missing after that, the error screen shows instead of reloading again. While Bambuddy is unreachable, for example while it restarts for the update, the page keeps its loading spinner and reloads only once the server answers, so a SpoolBuddy kiosk is never left on the browser's connection error page.
  - **Installed app:** the service worker answers the content-hashed files from its own cache and drops the previous version's files when an update arrives, instead of keeping every version it has seen.
- **Notification providers are listed alphabetically** — The Provider Type list in the Add Notification Provider dialog is now sorted by name, in whichever language the app is set to, instead of a fixed order that was hard to scan.
- **The Streaming Overlay builder remembers your choices** — Settings → Camera → Streaming Overlay kept its choices only while the page was open, so the fields to show, printer, size, frame rate, layout, artwork, transparency, camera feed and progress colours were back at their defaults after a reload or a visit to another page. They are now remembered in the browser you used, with a "Settings saved" toast once your edits settle. The token is still never stored. A new **Reset choices** link puts everything back to the defaults and keeps the token and the uploaded logo.
- **The camera settings stay short on large farms** — Settings → Camera listed every printer with its external camera switch and fields, so a farm of 120 printers got a card many screens long. The **External Cameras** list now holds only the printers that have one: **Add external camera** picks a printer from a list you can search by name or location, each row shows the camera type and address and folds its fields away, and a bin icon switches the printer back to its built-in camera.
- **Camera settings have their own tab, and the settings menu is sorted alphabetically** — Camera settings were split across two tabs: external cameras under General, and camera tokens and the Streaming Overlay builder under API Keys. A new **Camera** tab now holds all three: **External Cameras**, **Camera API Tokens** and **Streaming Overlay**. Old links to the tokens or the overlay builder, including `/camera-tokens`, open the Camera tab. API Keys keeps API keys, webhooks, Connected Apps and the API browser, and is no longer shown to a user who may see none of them; before, such a user only went there for their camera tokens, so an API Keys link now opens the Camera tab for them. Settings search finds the Streaming Overlay builder. The settings menu now lists **General** first and the other tabs alphabetically in the interface language. In Connected Apps, the **Add app** button no longer runs past the edge of the card on mid-sized screens, and the Brazilian Portuguese camera button on the printer card reads "Câmera" again instead of "âmera". Wiki updated. Covered by frontend tests.

### Fixed
- **Obico failure detection scores like Obico, and a resumed print isn't paused again (#3459, reported by @jasoncronje)** — Bambuddy's port of Obico's scoring left out the step that subtracts the long-term average, so whatever the camera always sees (plate texture, labels) added straight into the score, and the configured action ran as soon as that score passed High. The decision is now Obico's own: the score is the smoothed value minus the printer's long-term average, which carries over between prints on the same printer, so a background that is always in view no longer builds up. Between Low and High a slow build-up is not failing. **Notify only** fires at Obico's alert level, while **Pause print** and **Pause and cut power** wait for its pause level, which takes a clearly stronger signal and is now shown in the Status panel. A detection that appears suddenly and stays is still treated as a failure, as in Obico. Pausing a print no longer resets detection, so a print Bambuddy paused is not paused again after you resume it; the next print starts fresh. Wiki updated.
- **A dropped printer connection no longer replays old commands and cancels the print (#3454, reported and diagnosed by @SaadShaya7)** — When the connection to a printer dropped and came back by itself, every command still waiting for the printer's acknowledgement was sent again. Bambu printers often don't acknowledge, so that could be a Stop or a print start from hours earlier: a print 4 hours in was cancelled seconds after the reconnect, and an old print start raised "Device is busy and cannot start new task". Commands from the previous connection are now dropped when it comes back, also when a printer that was switched off is turned on again, and the log says how many. A command sent in the seconds before a drop isn't sent again; click it once more.
- **Finish photo: the plate is no longer driven to the bottom after a tall print** — With **Restore plate for finish photo** on, Bambuddy lowered the plate after the photo to the print's height + 100 mm, whatever the printer. On a 238 mm print on an H2C that is Z338, past the bottom of its travel: Bambu's own end G-code stops at the print's height + 2 mm when +100 doesn't fit, and the printer does not stop G-code sent over the network at its limits. The plate now goes back exactly where the print's end G-code left it, read from the archived file, and is only raised for the photo when the end G-code left it lower than just above the print (the H2C's doesn't, so its plate stays put). A file whose end position can't be read is not moved at all. Wiki updated.
- **An archive card counts every print's video** — An archive printed more than once (each plate of a project, or a reprint) counted every print's finish photos on its card, but its video button knew only the latest print's video. The button now shows how many videos the prints have and, when there is more than one, opens the archive, where each print's video plays. A single video still plays in place. The list view and the card's menu do the same.
- **"Change outcome" in an archive's print list changes it** — The button opened the outcome dialog, which for a print with a verdict only said "Already confirmed as a good part." under "How did your print come out?", with nothing to choose. It now opens as **Change outcome** with Good and Reject offered again, the current one marked, and Cancel to leave it as it was.
- **Every plate of an archive keeps its finish photo** — When an archive already had a photo, the finish photo of its next print (the second plate of a project, or a reprint) was taken and saved on disk but never added to the archive, so that print showed no photo. It is now added. Photos already lost this way are put back once at startup, wherever the file is still on disk.
- **One finish photo when the timelapse arrives late** — When the timelapse video arrived after the print-complete notification's 60-second wait, the archive kept both photos of the finished print: the live camera photo and the video's last frame. The frame now replaces the live photo under the same name, so the archive keeps one finish photo; with authentication off, the link in a notification already sent shows the better photo too.
- **MakerWorld imports work again (#3447 reported by @waynem-bris, #3448 reported by @frederic3114)** — Since 3 November every MakerWorld import, Save and Save & Slice failed with "MakerWorld did not return a download URL": the Bambu Lab endpoint Bambuddy asked for the download link still answers "success", but with an empty link. The link now comes from MakerWorld's download endpoint for the plate (its instance), with the same Bambu Cloud sign-in; the old endpoint is still asked when that gives none.
- **"Force color match" is kept on a job for a specific printer (#3445, reported by @frnzzle)** — With a specific printer picked, the print dialog showed the "Force color match" checkbox under each slot but never saved it: the job was added or saved with its trays only, and the box came back unticked. Once the tray picked for a slot no longer fit when the job came up, the scheduler matched the trays again against the colour the file was sliced with and, without that colour loaded, took any spool of the type, with "prefer lowest" the emptiest. A part sliced in white and set to black printed in green. A ticked slot is now saved, so the box stays ticked: set to a tray you picked, it asks for that tray's filament; on a tray the dialog matched by itself, for the file's own, so the job waits for it. Matching again takes only that filament or holds the job. Jobs for "Any" model were not affected.
- **Configure accepts a setting id as the filament (#3444, reported by @Novastorm4332)** — A client of the REST API that configured a slot with a spool's slicer filament as `tray_info_idx` sent a Bambu setting id such as `GFSL99` to the printer, which knows only filament ids (`GFL99`): the slot came back without a colour or type and auto-unlink dropped the spool. Assigning the spool already converted it. Configure now converts it the same way, the setting id staying as the slot's setting id, and does the same for a K profile's filament id. Support and SUNLU ids, which also begin with GFS, are filament ids and stay as they are. Bambuddy's own Configure dialog was not affected.
- **A project saved as .gcode.3mf is treated as a project (#3435, reported by @Mounting9612)** — Bambu Studio saves an unsliced project under whatever name it is given, and one called `Foo.gcode.3mf` went into the File Manager as a printable file. Printing it to a cost centre was refused with "Estimated cost is required for cost center prints", which says nothing about the cause; without billing it would have gone to the printer. A `.gcode.3mf` that holds no G-code is now stored as a project and offered for slicing, files already in the library are re-checked once on the update, and the queue refuses such a file with "… isn't sliced yet. Slice it first, then print the sliced file." The File Manager's Add to Queue judges a file by what it holds too, so a sliced plate exported as a plain `.3mf` can be queued from there.
- **A spool swapped in mid-print shows on the printer card (#3434, reported by @0xCyberFortress)** — After a runout, a new spool loaded into the same slot and assigned in Bambuddy stayed invisible until the print ended: the printer reports the slot loaded but blank and refuses a filament setting for the slot it is printing from, so the card showed "?" and "No filament assigned". The card now shows the assigned spool on such a slot in its colour, with an amber marker, names it and offers Unassign, saying that the printer has not taken it yet. Bambuddy also stops sending that setting on every AMS change while the slot feeds the print, which the printer refused each time, and sends it once the print is over.
- **Spoolman: a Bambu spool keeps its filament preset (#3433, reported by @ojimpo)** — In Spoolman mode, a spool the AMS sync created from a Bambu RFID tray was stored without the preset the tray reports, which the built-in inventory keeps. Assigned later to a slot without a reader, such as the external spool, it was written as the generic filament for its material: a Bambu PLA Basic became Generic PLA. The sync now stores the tray's preset on a new spool and fills it in on an existing Bambu spool that has none (a preset set by hand stays). And a Spoolman spool without a preset keeps the slot's current filament when it fits, as in built-in mode, before falling back to the generic one.
- **A camera opened from a printer card stays on the Printers page (#2737)** — Since cameras could be opened from any page, every camera overlay was shown on every page, also one opened from a printer card or the Cam Wall, which followed you around the app. Only a camera opened with the sidebar's **Cameras** button is shown everywhere now. One opened from a card or the Cam Wall is hidden on the other pages, still open, and back on returning to Printers; opening it from the **Cameras** button too puts it on every page. Each camera remembers which it is across a reload.
- **Spoolman mode no longer shows slots from the built-in inventory (#3430, reported by @sean3318)** — Since switching inventory modes keeps both modes' slot assignments, the Inventory page in Spoolman mode also read the built-in inventory's and gave them priority. Its spool numbers are its own, so a built-in assignment kept from before the switch put a printer slot on whichever Spoolman spool had the same number, and nothing in Spoolman mode could clear it: a spool taken out of the AMS kept its slot. Spoolman mode now only uses Spoolman's slot assignments: on the Inventory page, on the printer card and in SpoolBuddy (a slot's fill level came from the built-in spool too), also while Spoolman is unreachable, when the printer card offered to assign and unassign built-in spools. The built-in assignments are kept for when you switch back.
- **A spool whose tag is read in a slot leaves its other slots (#3427, reported by @Spegeli)** — When an AMS read a spool's tag, Bambuddy assigned the spool to that slot and left any other slot it was assigned to alone. A spool assigned by hand to an empty slot of one printer and then loaded into another was assigned to both: the first printer's slot was configured from it once a spool went in there, and its prints were charged to a spool sitting in the other printer. A tag read now takes the spool out of its other slots, as moving it by hand does; those slots keep what the printer has set, as after unassigning. A slot whose printer reports the same tag keeps its assignment. Internal inventory and Spoolman alike.
- **AMS Filament Backup pools spools the printer itself treats as backups (#1824, reported by @lightmaster)** — With Filament Backup on, a print short on its assigned spool is only held when all spools of that filament together are short. Which spools count as the same filament was decided from the spools in the inventory, by their preset as stored: a spool created from its RFID tag stores `GFA10`, one set up from the preset picker `GFSA10_02` or a user preset of its own, so two rolls of the same PLA Tough+ never pooled, and Start reported "Insufficient filament for the assigned spool" for a 194 g print with 142 g in one slot and 1000 g in the other, while the printer listed both for Auto Refill. The pool now follows what the printer reports for each tray, its filament preset and colour, which is what it switches on; the remaining grams still come from the inventory. Internal inventory and Spoolman alike, for the queue's Start, the dispatcher and the print dialog's warning.
- **One plate of a multi-plate file is measured against that plate (#3375, reported by @sargonas)** — The slicer's estimate on an archive adds all plates of the file up, so printing one plate of a three-plate file showed +200 % on the card, an archive printed more than once showed no badge at all, and statistics only kept time accuracies between 50 % and 200 %. An archive now keeps each plate's estimate from its 3MF (archives made before get theirs in the background after the update), and each print is measured against the plate it printed: the card's badge compares the latest print with its plate's estimate, the archive window shows each print's duration and filament next to its plate's estimate, the statistics' time accuracy goes by each print's plate, and the print start and queue job started notifications give the plate's time (the printer's own remaining time when the plate of a multi-plate file is not known). Moving a queued job to another plate now also updates the time shortest-job-first orders it by. A print of a multi-plate file whose plate is not known gets no estimate rather than the whole file's. Wiki updated.
- **Git backup: prints come back with their archives** — A Git backup held archives only, so restoring onto a rebuilt instance gave archives without their prints: statistics and the Print Log came back empty, and each print's printer, plate, outcome, cost and energy was lost. The backup now also writes each print (`archives/print_runs.json`) and which archive was merged into which (`archives/aliases.json`), and **Print archives** restores both: each print is attached to its restored archive, which then shows its latest print's outcome. An archive printed again since the backup is recognised by when it was archived and its prints' start times instead of being added a second time, and an archive merged into another, before or after the backup, is not restored as one of its own, with its spool usage going to the archive it went into. A print running when the backup was made comes back cancelled, like its archive. The one-tap confirm link, photos, timelapses and wallet links are not in the backup. Older backups restore as before. Wiki updated.
- **Orca Cloud presets with quoted string lists** - Orca Cloud returns lists like compatible_printers as one INI-quoted string, so its processes were hidden for every printer, and a process made for a user printer preset was refused by the slicer. Bambuddy now reads these lists the way OrcaSlicer does, in the preset list and on the slice path. Reported in #3380, fixed by @pleasantone in #3381.
- **A camera opened in the iOS home-screen web app can be left again (#3419)** — In Bambuddy added to the home screen ("Add to Home Screen" in Safari), opening a camera in window mode loaded the camera page into the app itself, full screen, with no way back short of closing the app. A web app has no second window to open, so its cameras now always open as the floating overlay: the camera button offers no window mode, and the overlay has no pop-out button. A Camera Wall tile opens the camera page in place. The camera page has a **Back** button whenever it was not opened as a window (web app, bookmark, link), which returns to the previous Bambuddy page or the start page, and its pop-in does the same there instead of trying to close itself. Bambuddy installed as an app on a desktop or Android is unchanged: a camera window opens normally there. Wiki updated.
- **The connection diagnostic no longer calls a macvlan container bridge networking (#3417, reported by @ddavidebor)** — A container on a Docker macvlan network has its own address on the LAN, so printer discovery and the Virtual Printer work, yet the diagnostic warned that it was on bridge networking and should be recreated with host networking. The interface is moved into the container from the host, like a bridge network's, and the check could not tell the two apart. It now reads the interface's link type: macvlan, and ipvlan in L2 mode, pass, and the subnet check runs as on host networking. ipvlan in L3 mode gets its own warning: it passes no broadcast or multicast, so the slicer can't find the Virtual Printer and printers can only be found with the subnet scan. Where the link type can't be read, the check now says the network mode could not be determined rather than guessing bridge. The support package reads the network mode the same way. Wiki updated.
- **Recalculate Costs uses the spools' current prices (#3414, reported by @BurgerKerman)** — Changing a spool's price and pressing **Recalculate Costs** changed nothing ("0 archives were updated"), whether or not the spool had its own price. Each usage record keeps what its grams cost when the print completed, and the recalculation only added those up again, so it read the old price back. The usage records of spools still in the inventory now get the spool's current price first, or the current default filament cost for a spool without one, and the archive cost is rebuilt from them. Each print in the Print Log moves by the change of its own records, or takes the archive's new cost when it is the archive's only priced print, so the statistics, project totals and order sums follow the new price as well. A reprint off a spool whose price did not change keeps its cost. Records of a deleted spool keep what they cost. In Spoolman mode, charges recorded since #3407 are repriced from the spool's current price in Spoolman. If Spoolman can't be reached they keep their price, and the Statistics page says how many. Wiki updated.
- **Spoolman mode gets the same usage history and stock forecast as built-in inventory (#3407, reported by @ojimpo)** — Bambuddy charges Spoolman for every print but kept no record of it, and Spoolman itself keeps only per-spool totals. So Spoolman mode had no per-print usage at all: the stock forecast could never use its **Trend** rate, and the spool dialog showed no usage history. Each charge is now recorded like a built-in spool's: grams, print, status, and the cost when the spool has a price. So the forecast reaches **Trend** once two days of prints are recorded, and the spool dialog lists its prints. The rows are part of the GitHub backup. The fallback rate used before that was also wrong in both modes. It divided a spool's grams by the days since it was added, so shelf time counted as use. A spool used up inside that span but last used more than 90 days ago dropped out with all its grams while its days stayed in. On the reporter's SKU it showed 9.2 g/d. Each spool's grams are now spread over the time it was actually in use, and what falls inside the last 90 days is divided by those days (12.2 g/d there). The stock alerts use the same rule. Wiki updated.
- **A Spoolman slot change made elsewhere now reaches open pages without a reload (#3402, reported by @Eifel-Joe)** — In Spoolman mode, an AMS slot's hover card kept showing the spool assigned before when the change came from another tab or client, here a filament scale using the API. The page only learns about slot changes that the server announces, and unassigning a slot, linking or unlinking a spool's tag, adding a spool from a slot, and writing a tag on SpoolBuddy did not announce theirs. They do now, as built-in inventory always has. Assigning a slot has announced since the move-on-scan change (#1606), but did so before taking the slot's tag off the previous spool, so a page could read that spool back and keep its fill level on the slot. It now announces after.
- **A timelapse baseline the printer's card could not give no longer attaches an old video to the print (#3412, reported by @ojimpo)** — When the card could not be read at print start (here during the FTPS handshake cool-off), Bambuddy recorded the empty listing as a card holding no videos. If the card was readable again by the end, every video still on the printer counted as new: the scan attached the first one to the print, deleted it from the printer, and took the archive's finish photo from its last frame. A baseline now records whether the card was actually read, including when a listing failed for another reason. With an unread one, several unclaimed videos are left on the printer for **Scan for Timelapse**, and a single one is still attached. The card is also read again every two minutes while the print runs, because the printer writes the video only after the print ends. Wiki updated.
- **SpoolBuddy reads Bambu tags reliably on the first scan (#3377, reported and contributed by @hibikipr in #3378)** — A Bambu tag's sector reads sometimes failed on the first try (authentication not answered, or a block read that came back empty), and the scan then went out without its tray UUID. Each step is now retried before giving up, a block is accepted only when two reads agree and the reader flags no error, and a reader fault during the read no longer stops SpoolBuddy from polling: the tag is still reported, matched by its UID.
- **A large tag catalog no longer pushes the File Manager's file list off the page (#3411, reported by @iammenasco)** — The tag filter showed every tag in the catalog as a chip, so 160 tags wrapped to about a dozen rows and left the file list a strip at the bottom. Active tags now always show first. The others take up to two rows, with **Show all (N)** opening them in a box that scrolls on its own. From 12 tags on, **Search tags** narrows them by name. Filtering works as before. Wiki updated.
- **A printer whose SD card or USB drive refuses the file no longer eats the queue (#3409, reported by @simonkreuchauff-oss)** — When a printer refused an upload with 553 or 552 (storage missing, full or unusable), or rejected the access code, the job failed. The printer was still idle, so the next job went to it and failed the same way: an H2D with an unusable USB stick put seven jobs in History within an hour.
  - **The job stays in the queue:** these refusals now work like a printer whose file service doesn't answer (#3210). The printer gets no jobs for five minutes, then the wait doubles with each refusal in a row, up to an hour, and the job is sent again when the wait is over. A job assigned to that printer shows what to check: "refused to store the file — check its SD card or USB drive", or its access code on the Printers page.
  - **"Any <model>" jobs move on:** a job for any printer of a model now goes back to the pool when its printer refuses the file, so another printer of that model can take it. This also applies to the refusals #3210 already kept in the queue. While it waits, its row names the refusing printer and why, instead of "Busy".
  - **A file name no card can hold still fails the job:** a 553 for a name with a character such as `:` or `?` would be refused on every printer, so that job fails with a request to rename the file, and the printer stays in service.
  - **Notifications:** a **Job Waiting** notification goes out on the first refusal of a run, also when no job is left waiting on that printer, and again if the run turns into something to fix (a refused card after a dropped connection). None for a job cancelled during the upload. These refusals used to send **Job Failed**.
  - The upload error now says "SD card or USB drive", as an H2D's external storage is a USB drive. Wiki updated.
- **Spoolman: the stock forecast no longer borrows a built-in spool's usage history (#3406, reported by @ojimpo)** — The Forecast view read Bambuddy's own usage history in every mode. That history belongs to the built-in inventory and is keyed by its spool ids, so after switching to Spoolman, a Spoolman spool whose id matched an old built-in spool took over its prints: a spool using 2.5 g a day could show 46 g a day ("Trend") and run out in days. In Spoolman mode the forecast now works from each spool's own consumption, as the stock alerts already did.
- **Spoolman: an external-spool print on an X2D or H2D is charged to the holder it ran from (#3405, reported by @juandelarossa)** — A print command that carries no `ams_mapping2` (#3166) writes the external spool as -1. In Spoolman mode that charged the left holder (254) whenever the printer listed it, which the X2D always does, empty or not, and in the daily builds no spool at all, so a spool on the right holder (255) was never charged. The built-in inventory treats such a mapping as no mapping and lets the printer's `tray_now` decide, and Spoolman mode now does the same, for finished and for aborted prints. In both modes `tray_now` 255 now also counts as the right-hand holder ahead of the last tray loaded before the print, which a print from that holder never updates, so the AMS tray or left holder an earlier print used was charged instead.
- **A printer that does not answer the K-profile read is no longer a printer without K-profiles (#3404, reported by @Spegeli)** — When the printer did not answer any of the three requests, the read returned an empty table, the same as a printer with no profiles for that nozzle. The K-Profiles page then said "No K-Profiles" and offered to create the first one, and the Configure AMS Slot dialog offered only the default K. Worse, a Git restore matched the backed-up profiles against that empty table and sent every one of them as a new profile, next to the originals still on the printer. The read is now an error: the API answers HTTP 504 "The printer did not answer the K-profile request", the K-Profiles page says the profiles could not be read and offers Refresh, and the slot dialog says so above the default. A restore skips that nozzle, counts its profiles failed and says the printer did not answer. The read-back after an edit no longer has to treat an empty table as a possible timeout.
- **The Slice dialog picks the right material for H2C filaments with OrcaSlicer preferred (#3403, reported by @pleasantone)** — Bambu Cloud lists its filament profiles without their material, which Bambuddy takes from the bundled profile of the same name. The OrcaSlicer bundle has no H2C profiles, so every "@BBL H2C" filament stayed without one, and a PETG-CF slot could be preselected as Generic PETG, also with "Only loaded spools" on. Such a profile now takes the material of the same filament's bundled profiles for other printers ("Generic PETG-CF @BBL X1C" for "Generic PETG-CF @BBL H2C 0.4 nozzle"), when they all agree. An OrcaSlicer Cloud filament saved without a material of its own takes it from the profile it was saved from.
- **SpoolBuddy (PN5180): NTAG tags with 7-byte UIDs are read through every cascade level (#3258, contributed by @Thomansky in #3346)** - They are no longer reported as 88 + three bytes. Spools linked with the short form are still found, in the built-in inventory and in Spoolman, and their link is upgraded on the next scan.
- **The stock forecast names a SKU's colour once (#3400, reported by @ojimpo)** — In Spoolman mode, a filament with no colour name takes its subtype as one, so a filament named "Black" with material "PLA Basic" read "Bambu Lab PLA Basic Black Black" in the forecast list, the chart legend, the alerts, the add-to-list dialog and the shopping list. A colour that is the same word as the subtype is now left out of the name. The SKU itself, its settings and the shopping list entries are unchanged.
- **The stock forecast counts used-up spools towards the consumption rate (#3399, reported by @ojimpo)** — Archived spools were left out of the forecast entirely, so once used-up spools were archived, a SKU's rate counted only what its remaining spools had used. A SKU in weekly use could show 0.2 g/day and run out in decades, and the Reorder and Stock Break alerts came late or not at all.
  - A spool archived in the last 90 days now counts towards its SKU's rate, in both inventory modes, on the Forecast page and for the alerts. Older ones don't, so a spool used up years ago doesn't drag the rate down.
  - Archived spools still aren't stock, and a SKU whose spools are all archived still isn't forecast. Wiki updated.
- **Reprinting a plate of a multi-plate file prints that plate, not plate 1 (#3395, reported by @Thomansky)** — **Print** on an archive, **Print again** in the print-outcome dialog and **Re-queue** in the queue history opened the print dialog with plate 1 selected, whichever plate the job had printed. In a file with many plates, plate 1 was the only one in view, so one click on Print printed the wrong part.
  - The dialog now opens on the plate that was printed and scrolls it into view. If the file no longer has that plate, it falls back to the first one.
  - The plates that will print are named above the buttons, e.g. "Plate 10 – Lid", so the choice stays visible however long the plate list is.
- **SUNLU and some P1/X1 presets put the right filament in an AMS slot (#3387, reported by @Spegeli)** — Bambuddy worked out a slot's filament id from a Bambu preset's setting id by dropping the "S" after "GF". For SUNLU that gives an id no profile has: SUNLU PLA+ (`GFSNLS03_04`) went into the slot as `GFNLS03` instead of `GFSNL03`. About thirty P1/X1-series presets carry another filament's id altogether, for example Generic TPU @BBL P1P is `GFU99`, not Generic EVA's `GFR99`.
  - **Configure AMS Slot** now takes the filament id from Bambu's own preset list, which carries it for every preset.
  - **Spool assignment, in both inventory modes, and K-profile matching** know SUNLU's ids and look up the P1/X1 exceptions by full setting id.
  - **Signed in to Bambu Cloud, a Bambu PLA Silk spool went into the slot as Bambu PLA Matte**: assignment read the preset without its variant suffix, and Bambu's bare `GFSA05` is PLA Matte @BBL X1. The same swapped TPU 95A HF, PA and PA-CF, Generic EVA, PETG-CF and Bambu Support For PLA. The filament now comes from the spool's full setting id.
  - **Orca Cloud profiles based on SUNLU** went into the slot as Generic PLA, because SUNLU and seven newer Bambu filaments (PLA Tough+, Translucent, Lite, Pure, PETG Matte, TPU 90A and 85A) were missing from Bambuddy's catalogue. They are now listed, also under the built-in presets. An Orca Cloud profile carrying one of OrcaSlicer's own filament ids is translated to Bambu's id the way OrcaSlicer does it, instead of being sent to the printer as is.
- **Mail from Bambuddy is no longer quarantined for missing headers (#3376, reported by @BenjaminCs)** — Bambuddy's mail had no `Date` and no `Message-ID` header, both of which RFC 5322 requires. A strict mail server (e.g. amavis with its default header check) accepted the message and then quarantined it, so Bambuddy logged a success and nothing arrived. Elsewhere a missing `Date` counts as a spam signal. Every mail now carries both: the SMTP test, welcome, password-reset and two-factor mails, and the email notification provider. The `Message-ID` uses the sender address's domain. A sender name with accented letters or a comma also broke the `From` header so that no address was left in it; the name is now encoded on its own and the address stays readable. The log now says "Email accepted by SMTP server", since Bambuddy cannot see delivery.
- **Bambu PLA Silk+ spools added by RFID get their colour name** — An RFID roll is named from the colour catalogue by its hex and the product line the AMS reports. A single-colour Silk+ roll reports "PLA Silk+", but the catalogue had the Silk+ colours (Silver, Titan Gray, Gold and the rest) filed under "PLA Silk", the line the AMS reports for the Dual/Tri Color silk, so every Silk+ roll arrived without a name, in both inventory modes. The seeded colours are now filed under "PLA Silk+". On an existing install the update moves the seeded Bambu Lab rows that are still as seeded (rows you edited or added stay as they are), and names the RFID-added Bambu spools that came in without a colour name; a name already set is never changed.
- **The X2D's auxiliary fans are named the right way round (#3373, reported by @Spegeli)** — On the X2D, the printer card's **Left Auxiliary Fan** drove the fan on the right of the chamber, and **Auxiliary Fan** the one on the left. The names came from the P2S, which numbers these two fans the other way round. On an X2D the card now shows **Left Auxiliary Fan** then **Right Auxiliary Fan**, still left to right, and the confirmation after setting a speed names the same side. The P2S is unchanged. The API keeps its field and fan names (`left_aux_fan_speed`, `aux`, `aux2`): on an X2D, `aux2` and `left_aux_fan_speed` are the right fan. Wiki updated.
- **The full-page G-code preview draws on wide screens (#3371, reported by @Underscan007)** — On a window 1024 px wide or more, with classic (non-overlay) scrollbars, **3D Preview** stayed black while the page scrollbar flickered on and off. The canvas was briefly wider than its pane after each resize and pushed the page into scrolling, which narrowed the pane again, without end. The preview is now clipped to its pane, so it settles at once and draws.
- **A print that finishes while Bambuddy restarts is archived as completed (#3310, reported by @Thomansky)** — When a print ended while Bambuddy was down (a container update, a host reboot), the printer's FINISH arrived as the first status of a new connection, so it never counted as the print ending. The reconnect then closed the archive as aborted with "No status update", logged it with no print time, cancelled its queue job and sent "print stopped". Now, when the printer still reports the archive's own job (the same job ID) as finished, the archive is closed as completed, with the library print count, batch run, finish notification and smart-plug auto-off that go with it. Its end time is the start plus the slicer's estimate for the plate that printed, never later than the reconnect, since the printer doesn't say when it finished. That time counts in the print-time totals but not in time accuracy, on the archive card or in Statistics. A failed job is closed as failed, with the printer's error as the reason when it has one. When the printer is idle, shows another job or reports no job ID, the archive is closed as aborted, as before.
- **Home Assistant's connection test names a certificate problem (#3300)** — After Home Assistant moved to https, **Test Connection** said "Could not connect to Home Assistant" when Home Assistant was up and answering, because a certificate Bambuddy does not trust fails like an address nothing answers on. It now says the certificate is not trusted, why (self-signed or from your own authority, issued for a hostname while the URL uses the IP address, or expired) and what to do, and says when https was used on a port that serves plain http. The Smart Plugs page of the wiki explains how to add your own certificate authority, also on a native install.
- **A bug report is no longer sent when debug logging stops (#3363, reported by @choumarin)** — "Stop & Submit" turned debug logging off and filed the report as a public GitHub issue in the same click, and the 5-minute auto-stop did the same with nobody watching, so a report meant only to capture a log was sent before it was ready. The button is now "Stop Logging": it collects the logs and ends on a review that says a public issue will be created and how many log lines were collected, with Submit and Discard. Closing the panel keeps the review, and a failed send goes back to it with the logs kept.
- **A camera turned sideways fits the camera window (#3362, reported by @BurgerKerman)** — With a camera's rotation set to 90 or 270 degrees, the camera window that floats over the page laid the picture out as if it were still landscape and then turned it, so it was cut off in a wide window and surrounded by black bars in a tall one. It now fits whatever size the window is resized to, as the camera page opened in its own browser window already did. The same happened to Cam Wall tiles, where a portrait camera was cut off at the top and bottom, and to the classic stream overlay without a fixed layout; both are fixed too. The camera page in its own window sized the picture to the screen rather than the space below its header, which cut a little off the top and bottom in a wide window; it fits the space now.
- **A SpoolBuddy kiosk no longer gets stuck on the login page during a database problem (#3360, reported by @sargonas)** — A kiosk signs in with its API key from the launch URL. When it loaded while Bambuddy's database was unavailable (out of connections, or a read-only replica after a failover), it gave up after three quick tries and showed the login page, which a touch-only screen can't use, until the next reboot. Pages now wait on a "Can't reach Bambuddy. Retrying…" screen and keep trying in the background, then show the page as soon as Bambuddy answers. A key or session Bambuddy reports as invalid, expired or belonging to a deactivated account still goes to the login page. This also covers browser tabs with a saved sign-in, which used to show the login page, or the app as if sign-in were off, when they loaded during an outage. Writing an API key's last-used time no longer refuses a key that has already been checked: if the write fails, the key is accepted and the failure logged. That time is now written at most once a minute instead of on every request, which takes one write and commit off almost every request made with a key. A write that fails is not tried again for a minute either. Camera tokens for the Cam Wall, stream overlays and camera streams get the same treatment: a failed last-used write no longer refuses a valid token.
- **Slicing for the Cool Plate SuperTack works (#3359, reported by @Akaviiii)** — Picking **Cool Plate SuperTack** in the Slice dialog sent a plate name neither Bambu Studio nor OrcaSlicer knows. The slicer then sliced for the Cool Plate and failed with "Filaments are not compatible with the plate type". **Smooth PEI Plate** had the same problem: the slicers call that plate High Temp Plate, so the dialog now offers it once, as **Smooth PEI Plate / High Temp Plate**. Slicer pipelines saved with either option slice on the right plate without being saved again. A plate name no slicer knows is now refused when slicing through the API or saving a pipeline, instead of being sliced as Cool Plate, and so is OrcaSlicer's Textured Cool Plate when Bambu Studio does the slicing. A pipeline holding a plate the dialog doesn't list shows that plate when it is applied, instead of showing Auto, and a run of a pipeline with a plate no slicer knows fails with a message saying so. Files sliced for OrcaSlicer's Textured Cool Plate now also record their bed temperature.
- **The MQTT Debug log shows what the printer sent** — Each logged message was the same object Bambuddy then processed, and processing writes Bambuddy's own state into it. An incoming push therefore showed Bambuddy's merged AMS list instead of the printer's AMS block, without fields such as `ams_exist_bits` and still listing an AMS that had been unplugged, and later messages could gain an AMS list they never carried. The log now keeps every incoming message exactly as it arrived.
- **Printers without an AMS print from the spool holder (#3356, reported by @dogod3814t)** — A queue print to a printer with no AMS attached, such as a P1S on its spool holder alone, failed with "Failed to get AMS mapping table" when nothing was set on the spool holder. With nothing to match, the job went out without a filament mapping and asking the printer to use its AMS, which it refuses. Bambuddy now tells a printer that reports no AMS to print from the spool holder, as the slicer does. Dual-nozzle printers are unchanged. An AMS unplugged while Bambuddy runs also disappears from the printer card and from slicers connected through a virtual printer now, instead of staying until a restart, so this works straight after removing one. As with a spool taken out of a slot, spools assigned to an AMS that stays unplugged for more than two minutes are unassigned; RFID spools are assigned again when the AMS is back, other spools need assigning again.
- **A personal cost center's budget can be changed (#3358, reported by @airforceixi)** — Saving the **Edit cost center** dialog on a user's personal cost center failed with "Private cost centers cannot be deactivated or renamed; set their budget to 0 to prevent printing", even when only the budget was changed, so a budget (or 0, to stop that user printing) could not be set. The dialog always sent the name as well, which a personal cost center refuses, and the budget was never saved. It now saves only the budget for a personal cost center, and its name field is greyed out, as the name is the user's.
- **Slicing a painted multi-colour model keeps its colours (#3355, reported by @cartman75)** — On a model coloured with the paint tool, slicing in Bambuddy could turn several filaments into one colour, for example black, white, green and green all coming out green. Before slicing, Bambuddy works out which filaments the plate doesn't use and swaps them for one it does, so the slicer's material checks pass. It misread the painted areas, so painted filaments counted as unused and got another slot's profile and colour, and the print dialog then mapped them to that slot's spool. Painted areas are now read correctly, including small ones. A filament that really is unused keeps its own colour when it is swapped.
- **An AMS Lite shows its serial number and firmware version (#3348, reported by @Spegeli)** — The printer reports both in its version answer, where the AMS Lite calls itself `ams_f1`. Bambuddy only knew the names of the other AMS models, so it skipped the AMS Lite's entry. The AMS popup showed "—" for both, the status API returned them empty, and the log warned on every connection that they were missing. They now come through on the A1, A1 Mini and A2L, including the A2L's AMS Lite, which the printer numbers differently. A name given to an AMS Lite before this, which was kept by its position because it had no serial number, still shows on the printer card and in the inventory's location column. Saving it again moves it to the serial number, so it follows the unit, and **Clear** now removes it; before, the old name came back after clearing.
- **The queue's "View in File Manager" icon opens the file (#3336, reported by @Magical-Penguin)** — On a job added from the File Manager, the link icon next to the name went to `/library`, which is no page, so the screen stayed empty. It now opens the File Manager in the file's folder, with the file marked and scrolled into view, in the grid, list and column views. The folder is looked up when the link is opened, so a file moved since it was queued is still found. A deleted file, or one you can't see, shows a warning. The archive icon on the same cards opened the Archives page without pointing at the archive; it now marks the archive too, switches from the log or calendar view to the grid, and warns when the filters hide it. An archive tile on a project's page did the same and now opens its archive marked as well. Both look in a freshly loaded list, so an archive created since the page was last open is found. Wiki updated.
- **An H2D Pro reports its chamber and can heat it, and so can an X1E (#3335, reported by @Spegeli)** — A printer stored as "H2D Pro", which is what discovery and the add-printer list store, was checked against the model lists as "H2D PRO", with the space kept, while the lists spell it "H2DPRO". So an H2D Pro got no chamber temperature on the printer card and in the API (Home Assistant included), setting its chamber temperature was refused, and queued prints got no chamber preheat or soak and never switched the airduct to heating, or back to cooling for a PLA print after ABS; the printer card did not offer its airduct toggle either. Every model check now compares the name without spaces, and the card lists the H2D Pro. Separately, the X1E was listed as having only a chamber sensor although it has a chamber heater (up to 60 °C): setting its chamber temperature was refused and the queue never preheated its chamber. It now does both; the X1E has no airduct flap, so none is switched.
- **A print started over LAN is linked to its archive, and its print time is no longer short (#3327, reported by @Andrewdlec)** — A print sent from Bambu Studio over LAN, or started from Handy or the printer's screen, reports no job id, and printer status found a running print's archive only by that id, so `current_archive_id` stayed empty for the whole print and the printer card could not name the plate of a multi-plate file. Status now also finds the running print's archive as soon as it exists, also after a Bambuddy restart mid-print, and never names an archive that was deleted. The printer card's cover image and a reloaded skip-objects list of such a print are now read from the archived 3MF instead of being fetched from the busy printer again over FTPS (skip-objects only while Bambuddy knows which archive is the print's, never by name). Separately, an archive's `started_at` was the moment it was written, after the 3MF download, which can take a minute at the start of a print; the print time taken from it at completion was short by that much. It is now the moment the print was seen to start, also for an archive written without a 3MF.
- **A spool replaced during a print is charged only for its part (#3325, reported by @HarryCoff2)** — When a spool ran out and a new one was loaded in the same slot (an external spool, or an AMS slot without a backup) and assigned in Bambuddy while the print ran, the whole print was charged to the new spool. Bambuddy now notes the layer of the new assignment and, when the print ends, splits the filament between the two spools by what the G-code feeds before and after it, for completed and failed prints, with the built-in inventory and with Spoolman, also after a restart mid-print. A slot that had no spool when the print started is still charged to the spool assigned to it, for the whole print.
- **A write is saved before its response is sent (#3320, reported by @MorganMLGman)** — Many API routes left the final save to the end of the request, and that ran only after the response had gone out. A client reading straight after a successful write could miss it (a new project came back as 404, an edit still showed the old value), and a save that failed at that point was undone behind a success the client already had. Every route now saves before it answers, and a failed save is reported as an error.
- **A failed or cancelled print's card says its cost is for one full print (#3318, reported by @ojimpo)** — After a print failed or was cancelled, the archive card showed the cost and grams of the whole file with no hint, as if that were what the run cost. The archive keeps one full print's figures on purpose (reprints are estimated and billed from them); the cost and grams now carry a tooltip saying so, pointing to the archive's Print Log for what the run used. With Spoolman, that run's cost is priced from the spools it was charged to.
- **A print that fails or is cancelled early is charged only for the filament it used (#3317, reported by @ojimpo)** — Two errors added up to a failed print being charged to Spoolman as if it had finished, sometimes for more than the finished print would have used. Even with both fixed, a print cancelled near the end could still cost more than the same print finished.
  - **The previous print's layer:** right after a print starts, the printer can send one update that still carries the layer the previous print ended on (seen on an H2S: layer 357 of 357 at 0 %). Bambuddy took it as this print's last layer, so a print that failed before its first layer was charged up to layer 357. That value is now ignored until the new print reports a layer of its own. It also no longer counts as a layer change, so it no longer adds a layer-timelapse frame at print start.
  - **Retractions:** partial usage is worked out from the extrusion in the file's G-code, which counted each un-retract but never the retract before it. Every retraction added to the total, putting partial usage up to 1.7x above the slicer's weight. Retractions are now subtracted. The split between spools after an AMS switch to a backup spool mid-print uses the same figures.
  - **Cancelled near the end:** the G-code feeds more than the slicer counts (the start sequence, and the purge when the AMS changes filament) and feeds it before the layers it serves. A finished print is charged the slicer's weight, so a two-colour X1C print cancelled at layer 33 of 47 cost 2.55 g against 2.33 g for the whole print. A cancelled print is now charged each filament's slicer weight, times how far the G-code had fed that filament when the print stopped: 2.19 g in the same case. The purges still count when they happened, and a cancelled print never costs more than the finished one. After an AMS switch to a backup spool, that weight is shared between both spools by what the G-code fed from each, and Spoolman no longer charges a cancelled print for a filament the slicer weighed at 0 g, as a finished print never did. Both Spoolman and the built-in inventory. Thanks to @Andrewdlec for the files.
- **Writing a SpoolBuddy tag takes it off the spool that held it before (#3312, reported by @sgiffhorn)** — With Spoolman, writing a tag that another spool already carried was meant to clear it from that spool first, but Spoolman refused the empty value Bambuddy sent. Both spools kept the tag, and the next scan could show the old spool. The tag is now cleared properly, from every other spool that carries it, including when the spool being written already held it as a Spoolman 0.27 tag.
- **A large 3MF that times out at print start is not downloaded a second time (#3308, reported by @elizabethburg)** — On a slow link, such as an A1 in its start-up routine, a 3MF too large to finish in time was downloaded twice: once by name, and again when the folder listing found the same file. Each attempt took up to 5 minutes, holding the printer's only file connection with the cover images queued behind it. It is now tried once. The archive starts without the 3MF and the recovery retry fills it in, with up to 15 minutes for a large file.
- **"Print again" on the printer's screen is archived with its 3MF (#3307, reported by @elizabethburg)** — A print that archived in full the first time got an empty archive (no 3MF, thumbnail or filament) when started again with **Print again** on the printer. On a reprint the printer doesn't name the file on the card: it reports its own internal copy under a generic name, plus the model's title from inside the 3MF. When that title differs from the file name, as with a project saved under another name, Bambuddy couldn't find the file.
  - **Now:** when the file can't be found, Bambuddy looks for an earlier archive of the same job on the same printer and archives the new run with that 3MF. The earlier run must have been sent from the slicer or started on the printer, with the same title and plate, and the same layer count when the printer has already reported one. The log names the archive the 3MF came from.
  - **Unchanged:** a run with no such earlier archive still gets the name-and-timing archive. When the card lists a file for the print and only its download failed, the retry fetches that file instead.
- **Check Belt Tension on a P1 printer links to Bambu Lab's belt tensioning guide (#3302)** — The maintenance task's help link on a P1P or P1S opened Bambu Lab's general P1 maintenance recommendations instead of a belt guide. It now opens the "X1/P1 Series Belt tensioning procedure" page, which covers both series.
- **Searching "#123" in Assign Spool finds that spool whatever the slot holds (#3301)** — Searching for a spool's number with a `#` in front, as in `#123`, only looked among the spools matching the slot's material. A spool of another material came up empty unless **Show all spools** was ticked, as if it had been deleted.
  - **Now:** a `#` search shows exactly that spool, whatever its material. Assigning a spool of another material still asks first, as before. Any other search still lists only spools matching the slot.
  - **When the spool still can't be offered**, the list says why: it is already assigned to another slot, it is archived, or there is no spool with that number.
- **The File Manager's buttons fit on a phone (#3295, reported by @apizz)** — The buttons at the top of the File Manager (view mode, Generate Thumbnails, Link External, New Folder, Tags, Purge old, Trash, Upload) sat in one row that couldn't wrap. On a phone they ran far past the right edge and pushed the whole page sideways. They now wrap onto more lines when the screen is too narrow, on a phone or a narrow desktop window.
- **The print dialog's slot picker can be read on a phone held upright (#3294, reported by @apizz)** — In the Print and Schedule dialogs, the picker that chooses a printer slot for each filament was squeezed to a color dot and an arrow on a portrait phone. On printers with a nozzle rack (H2C) it had about 55 pixels. Its open list was only as wide as the picker, so the slot names couldn't be read until the phone was turned sideways.
  - **Now:** on screens narrower than 640 pixels the picker gets a line of its own under the filament the file asks for. The open list is as wide as the slot names need, up to the width of the screen, and moves left instead of running off the right edge. The same applies to the filament override picker used when printing to any printer of a model, and to the custom slot mapping shown for each printer when printing to several. On wider screens the rows are laid out as before, and a long slot name in the open list is shown in full instead of cut off.
- **Stitching a layer timelapse no longer needs gigabytes of memory (#3292, reported by @fma965)** — ffmpeg's x264 encoder picks its number of threads from the host's cores, not the container's CPU limit, so stitching 300 frames of 1080p peaked at 1.2 GiB on a 30-core host and 120 frames of 4K at 4.6 GiB. ffmpeg runs inside Bambuddy's container and counts against its memory limit, so a pod with a 2 GiB limit was killed the moment a long print finished, and its timelapse was lost.
  - **Now:** the stitch uses two encoder threads and a shorter lookahead, with the same quality settings. Frames larger than 1080p are scaled down to it, keeping their shape. Measured: 1080p 1.2 GiB → 300 MiB, 4K 4.6 GiB → 270 MiB. On a host with many cores the stitch takes longer. Saving an edit in the timelapse editor encodes with the same limits.
  - **No ffmpeg left behind:** the camera snapshots, the printer camera capture, the last frame taken from a timelapse and the stitch now stop their ffmpeg however they end. Before, only running out of time did, and an error or a cancelled capture left ffmpeg running and holding memory. A stitch that stops part-way no longer leaves a partial video behind.
- **The timelapse player fits the screen with a portrait video (#3281, reported by @BurgerKerman)** — A timelapse from a camera turned to portrait with the External Camera **Rotation** setting came out taller than a landscape screen. The player grew with it, so the bottom of the video and the play, seek and speed controls were off screen and could not be reached.
  - **Now:** the player is never taller than the window, and the video is scaled down to leave room for the controls, with black bars at the sides. A landscape timelapse is only scaled down when the window is too short for it. In the timelapse editor the video takes at most a little over half the window's height.
  - **Translated:** the player's Edit, Download and Speed labels and the skip buttons' tooltips were always in English.
- **A color set on the printer's touchscreen is named after the Bambu color it is (#3279, reported by @Lioncat55)** — A slot without an RFID tag reports a hex a step or two off Bambu Studio's, for example `#5A657B` for **Blue Grey** (`#5B6579`). No catalog entry matched it exactly, so the slot was called by a general name such as "Blue", while the printer's screen showed a gray.
  - **Now:** when no catalog entry has exactly that hex, the color is named after the closest **Bambu Lab** color in the Color Catalog, as long as it is close enough to be the same color.
  - **Within the slot's own range:** the range comes from the slot's material or, without RFID, from the filament preset picked on the printer's screen. A PETG Translucent slot is named from PETG Translucent colors, and a range Bambu makes never borrows a nearby color's name from another range. Only a filament outside Bambu's ranges is compared with all of them.
  - **Where:** the AMS slot details on the printer cards, the print dialog and the queue. A hex with no Bambu color that close keeps its general name. Spool names in Inventory are unchanged.
- **A job queued for "Any" model no longer keeps returning to a printer that can't map its filament** — When choosing a printer, the queue only checked that each filament type, and each forced colour, was loaded somewhere on it. On a dual-nozzle printer (H2D, H2C, X2D) without a filament track switch, a spool only feeds the nozzle it belongs to. A printer with the filament on the other nozzle was still chosen, and the job was held there and handed back. **Start** then let it go without offering **Print Anyway**, and the next pass chose the same printer again.
  - **Now passed over:** a printer is only chosen when the job's filaments can be matched to its spools the way they are when the job is sent. Another printer of the model that has them gets the job.
  - **Also on single-nozzle printers:** the queue gives each slot its own spool, so two slots of the same material need two spools of it. A printer with only one spool of it was chosen and looped the same way.
  - **When none has them,** the job waits unassigned, with the filament it needs in its reason, and goes out once a spool is loaded. **Print Anyway** is unchanged.
- **Force color match is kept for a job queued to a specific printer (#3280, reported by @Lioncat55)** — A job queued for one printer, for example through a virtual printer with **Force color match** on, printed on the first spool of the same material when none had the requested colour. A job queued for "Any" model was held in the same situation.
  - **Now held:** the job waits with "Needs PLA #A4AAAC" on the queue row until a spool of that material, in exactly that colour, is loaded. Then **Start** sends it. A spool of a similar colour no longer counts, and when the file asks for a particular variant (Basic, Matte, Silk), a spool of another variant doesn't either. A spool that reports no variant still counts.
  - **One spool per slot:** two slots asking for the same filament need two spools of it, for a job queued for one printer and for "Any" model alike. Before, one spool counted for both when choosing a printer, and the second slot was then left without one.
  - **A slot chosen earlier is checked again:** a slot picked before the spool was swapped is checked against the colour again when the job is sent.
  - **Printers without an AMS** hold the job too, instead of failing it, so the right spool can be put on the external holder.
  - **Print Anyway** still sends the job as it is.
- **Escape closes the Build Plate Check result as soon as it appears** — Pressed in the moment the result opened, Escape could be ignored, so the window stayed open and a chamber light the check had turned on stayed on until it was closed another way.
- **The Printers page sent hundreds of requests on a print farm, and every page asked for each printer's status** — Each printer card fetched its own status, slot presets, AMS labels, power plug, action buttons, sensor readings, firmware check and queue, one request per printer. With 59 printers that was about 550 requests when the page opened, which the server worked through one behind the other, so cards took 5 to 20 seconds to fill. The sidebar, the camera wall and other pages also fetched every printer's status one by one.
  - **Now batched:** requests for the same kind of data that arrive within a few milliseconds go out as one request, so the Printers page sends about one request per kind of data however many printers there are. The cards' own refresh timers are unchanged, including the 30-second status poll, and they too are combined into one request each round.
  - **Same answers:** each combined request returns exactly what the per-printer one did, with the same permissions and printer access. Refreshing a single printer after an action, or a page that shows one printer, still sends the per-printer request.
  - **Archives page:** the folders shown on each archive card are fetched the same way, instead of one request per card that each loaded the whole folder list.
- **Opening the Queue page could stall Bambuddy for over a minute on a print farm** — The page fetched the whole queue, finished runs included, every five seconds and sorted out the history in the browser. With a few thousand finished runs that was several megabytes per refresh, and building the answer held up every other request: printer cards, the camera, everything, until a proxy in front of Bambuddy gave up with a timeout.
  - **History is paged on the server:** the History tab loads 50 runs at a time and **Show more** fetches the next 50. Sorting by date, name or printer and the printer, status and location filters are applied by the server. A batch row still counts all of its runs.
  - **The queue itself** refreshes only pending, printing and skipped jobs every five seconds.
  - **Clear History is one request** instead of one per finished run, with the same rule as before: a run a batch order still needs is kept as cancelled (#2960). It now clears exactly what the History tab shows, so the location filter counts too, as the confirmation's number already did.
- **Saving in the timelapse editor could fail on long videos, and ignored the music volume** — Save re-encoded the video while the browser waited, which for a long timelapse took minutes. A browser or reverse proxy that gave up showed an error while FFmpeg went on running on the server.
  - **Runs in the background:** Save now starts the work on the server and returns at once. The button shows how far it has got, **Cancel** stops FFmpeg and keeps the original, and an editor closed and opened again shows the progress. While one edit of a timelapse runs, Save is unavailable for it. If the timelapse is removed or replaced while the edit runs, the edit is not saved over it.
  - **Music volume:** the volume slider only changed the preview; the saved video always had the music at full volume. It is now mixed in at the volume set, and muted means silent.
  - On a broken file, reading the video's details now gives up after a minute and each timeline frame after 30 seconds, instead of waiting forever.
- **Firmware could be uploaded to a printer in the middle of a print** — The firmware update dialog offered **Upload Firmware** whatever the printer was doing, and the upload wrote to the SD card the print runs from. It is now only offered while the printer is idle (a finished or failed print counts), and the server refuses it otherwise. If a print starts while the firmware is still downloading, nothing is written to the card, and the queue holds its next print for a printer until its firmware upload is over.
- **Reset Slot cleared an AMS slot on a single click, even mid-print** — It now asks first, and is unavailable while a print is running, paused or starting, since the print may be feeding from that slot.
- **Some destructive buttons acted without asking** — **Clear all** on the shopping list, **Clear** in the Git backup history and removing a linked SSO account now ask for confirmation first. An account created through SSO, which has no password, can no longer remove its last SSO link, which was its only way to sign in.
- **LDAP and SMTP "Test" checked the saved settings, not the form** — Changing a field and clicking **Test Connection** or **Test Email** tested the old values, so a test could pass on settings that weren't the ones about to be saved. Both now test what the form holds, before saving. LDAP's test also works while LDAP is still disabled, and in that case now uses a saved CA certificate path too. An empty password keeps the saved one, as when saving; with a changed server it has to be entered again.
- **A user's email couldn't be removed** — Emptying the email field when editing a user saved without error but kept the old address. It is now removed. The edit is refused while advanced authentication is on, or while the user signs in with email codes (email two-factor authentication), since both need the address.
- **Deleting a local backup failed silently** — When the server refused or failed the delete, no message was shown and the file stayed in the list. The error is now shown.
- **Purging archives could delete by an age that wasn't previewed** — The "Purge old archives" dialog previews what it will delete a moment after you stop typing, but the delete button took the age currently in the field. Changing the age and clicking straight away deleted archives for the new age while the button still showed the old preview's count. The button now waits until the preview matches the field, and the purge uses the previewed age.
- **Editing a transaction to "No cost center" kept the old cost center** — Finance showed "Transaction updated", but the entry stayed booked to its previous cost center.
- **After deleting a printer, spools still showed as loaded in it** — The spool assignment list wasn't refreshed, so the inventory kept showing spools in the deleted printer's slots for up to 30 seconds.
- **API keys of Operators were refused on queue, archive and library routes** — A key whose owner may act only on their own rows (the built-in Operators group) got `403 API key owner does not have 'queue:update_all' permission` when it listed, edited, cancelled or deleted even its owner's own queue jobs, and the same on archives and library files. Such a key now acts on its owner's rows and not on anyone else's. Keys of owners with the `_all` permissions, and keys without an owner, reach every row as before.
- **Statistics: Today, This Week and the other ranges used UTC days** — Near midnight they showed the wrong day's prints for anyone outside UTC: in Berlin at 01:30, "Today" showed the previous day. A day now runs from midnight to midnight in your browser's time zone, for every date filter on the Statistics page, and the date pickers allow today. API callers can name the zone with the new `tz` parameter on the date-filtered archive and statistics endpoints; without it, a date is a day in Bambuddy's own `TZ` (UTC days before).
- **A print that failed on its first run left the archive costing only the part it printed** — With the built-in inventory, the archive took the failed run's partial cost, so a reprint was estimated, reserved and billed from that fraction. The archive now keeps the cost of one full print (as in Spoolman mode); the failed run's own cost is still recorded in the Print Log.
- **Spoolman: a very short print could end with its estimated cost instead of the real one** — The cost estimate made at print start could still be waiting on Spoolman when the print ended, and then wrote over the real cost. Completion now stops it first.
- **After a 2FA or SSO login, LDAP and OIDC users were offered "Change Password"** — The login answered as if they were local users, until the page was reloaded.
- **The same printer fault could be listed twice** — A fault the printer reported both as a print error and in its HMS list was not recognised as the same one.
- **H2D: a refused manual filament load could show the wrong active tray later** — Its target slot was remembered until something cleared it, so a print loading the same slot number on another AMS much later was shown as that slot. It is now forgotten after two minutes.
- **K-profiles: a printer refusing the re-applied profile after an RFID read was not in the logs** — Only the "applied" line was, which made wrong pressure-advance prints hard to diagnose.
- **K-profiles: opening several pages at once could fetch the cloud filament names many times** — Each one fetched every custom preset from Bambu Cloud while holding a database connection; they now share one fetch.
- **Library API: changing a file's folder could move it into or out of an external folder without moving the file** — The file then showed in a folder it was not in. That change is now refused with a pointer to the move endpoint, which moves the file itself.
- **Slicing: a slow progress answer was reported as "Slicer sidecar unreachable"** — It now says the sidecar did not answer in time.
- **Printer card: the cooling/heating mode switched on the printer showed the old mode** — The live updates did not carry it, so the card caught up only with its next refresh.
- **Printer card: an H2C rack slot's material label disappeared** — The live updates replaced the rack without each slot's filament type, so the label fell back to the filament ID or went blank until the next refresh.
- **Git backup: a print running when the backup was made came back as a failed print** — Restored as still printing, the archive was closed on the next printer reconnect as if the print had just failed, with a failure notification and a Print Log entry. It is now restored as cancelled ("No status update received"), the way Bambuddy closes a print it lost track of; an archive this instance still has keeps its own status on overwrite.
- **Git backup: spools came back as never used** — When each spool was last used was not in the backup. It is now backed up and restored (an older backup leaves the value already there).
- **File manager: a slow folder listing showed as "printer unavailable"** — Listing a large folder (such as the camera recordings) on a slow SD card can outlast the wait, and was reported like an unreachable printer; every refresh also started another listing while the last one still ran. It now says the listing is taking too long, and a refresh waits for the listing already running.
- **Printer files from the evening could be dated a year back** — File times on the printer carry no year, and the year was taken from the host's local clock while printers report UTC. On a host behind UTC, files written in the evening were dated a year back, so their camera recordings were not matched to their prints.
- **SpoolBuddy: writing a sticker could break a Bambu spool's AMS link in Spoolman mode** — A Bambu spool created from the AMS is linked by its RFID tray ID; it was listed as untagged on the Write Tag page, and a sticker written to it replaced that link in Spoolman, so the next AMS sync created a duplicate spool. It is no longer listed as untagged, and on a Spoolman that does not also keep the tray ID as a native tag (before 0.27) the write is refused with the reason.
- **SpoolBuddy: Write Tag warned "color_name not set" for every Spoolman spool** — The warning looked at a Spoolman field that is never filled; Bambuddy keeps the colour name with the spool. It now warns only when the name is missing, and says the tag then carries the subtype instead.
- **SpoolBuddy: an update reported success after installing its dependencies timed out** — The device was restarted while the install could still be running. A timeout now stops the update with an error (and the time allowed went from 2 to 5 minutes); a failed install still completes, and its output is now in the log.
- **Virtual printer: a late slicer update could rewrite a queue job already being sent** — The slicer's print options can reach a virtual printer seconds after the job was queued. If the scheduler had already started sending the job, its AMS mapping and options were still rewritten, so the queue entry -- and the spool charged from it -- could differ from what the printer printed. Such a job is now left as it was sent.
- **Backup restore: the virtual printers kept running during the restore** — The step meant to stop them did nothing, so their FTP, MQTT and discovery services stayed up while files were replaced. They are now stopped, and start again with the restart a restore asks for.
- **API: the legacy virtual printer settings route answered 200 for settings it no longer applies** — `PUT /settings/virtual-printer` saved enabled, access code, mode, model, target printer and remote interface to settings nothing reads (each virtual printer keeps its own). It now refuses them with a pointer to `PUT /virtual-printers/{id}`; the archive name source and Tailscale switch still work there.
- **Settings: removed "Save thumbnails" and "Notification Language", which did nothing** — Nothing read either: thumbnails were always stored, and notifications always used their template text as written. The API still accepts both fields.
- **Restoring an old SQLite backup onto PostgreSQL could put some timestamps hours off** — Required timestamps the backup left empty were filled with the host's local time, while every other timestamp is stored in UTC, so on a host ahead of UTC those rows appeared hours in the future. They are now filled in UTC.
- **Maintenance: a printer's time offline was counted as print time** — A printer that dropped off mid-print and came back printing hours later had the whole gap added to its runtime, so hours-based maintenance came due early. Time while Bambuddy itself was restarting is still counted, as before.
- **Maintenance: duplicate maintenance items** — A printer's items are created when its maintenance is first shown, and two pages (or a page and the background check) could each create the same one; marking it performed could then update the copy not shown, and assigning that type again failed. Existing duplicates are merged on upgrade (the most recently performed one is kept, or the one the page showed when none was, with the history of all), and they can no longer be created.
- **Maintenance API: "performed" answered in hours for an item set to days** — Its response used the maintenance type's interval type instead of the item's own setting, which the list already used.
- **Notifications: the daily digest could be lost** — When the digest could not be sent (a network error, say), its events were deleted anyway. A digest time inside the provider's quiet hours was skipped, logged as sent, and its events deleted too. The digest now goes out at its time even during quiet hours, and a failed send keeps the events for the next day's digest (events more than two days old are dropped, so a provider that keeps failing does not pile them up). Lines from an earlier day show their date.
- **Notifications: a later print could be attributed to the user of an earlier queued one** — When a queued print's archive was deleted while it was being sent to the printer, the record of who queued it was left behind, and an unrelated later print of the same name on that printer named and emailed that user.
- **Notifications: "Print Stopped" after a printer came back online showed the time it was offline as the print's duration** — A print that ended while the printer was offline is closed when it reconnects; its real end time is unknown, so the notification now shows the sliced estimate instead of, say, 14 hours.
- **Notification templates: the print outcome confirmation had no variables or preview in the editor** — The editor now lists its variables (including the confirmation link) and previews it, and seven other events (AMS humidity and temperature, bed cooled, the sensor alerts, auto-drying suspended, missing spool assignment) have their names.
- **Configure Slot: a manual K value that could not be sent was reported as applied** — With no K-profile picked, a typed K value goes to the printer on its own command; when that send failed, the slot still read as configured. A warning now says the filament was set but the K value was not sent.
- **A stray Stop on an idle printer could relabel a later failed print as cancelled** — Stop on a printer with no print loaded still marked it as stopped by the user. If the next print was first seen mid-way (after Bambuddy reconnected), that print's real failure was then reported as the user's cancel. The mark is now only set while a print is loaded (or the printer's state is unknown).
- **Skip Objects and the printer connection diagnostic held a database connection through their printer I/O** — For a print started outside Bambuddy, the object list pulls the file over FTP, which on a printer mid-print can take a while; the diagnostic probes the printer and waits up to 10 seconds for a report. The connection is now released first.
- **Camera light: the plate check could switch the light off under a live view** — With the camera light setting on, a live view opened while the print-start plate check had the chamber light on found it already lit, so it never took it, and the check then switched it off: the view went dark. The plate check now holds the light like every other camera use (and still lights the chamber whatever the camera light setting), so it goes off only once nothing uses the camera, after the usual short grace.
- **External MJPEG cameras: timelapse frames, finish photos and Obico checks failed while someone watched** — A single-client camera (an ESP32 stream, for example) refused the second connection these opened while a live view was running. They now take the live view's frame, as they already did for the printer's own camera. A camera with a separate snapshot URL keeps using that URL.
- **X1C live view could stop instead of reconnecting** — The printer ends each camera session about once a minute and Bambuddy redials; a background cleanup that ran at that moment could make the live view end instead.
- **Camera test, diagnose, plate check and plate calibration held a database connection for the whole capture** — Up to 30 seconds each, which on a large farm could exhaust the connection pool. They now release it before capturing.
- **API: `GET /queue?status=` with several statuses returned nothing** — The documented `?status=pending,printing` was matched as one status. Comma-separated statuses are now each matched.
- **Saving an edited queue item showed "Queue item updated" twice** — The dialog also closed twice, a failed save showed two error toasts, and an edit that also added the job for further printers closed the dialog before those were added. It now reports and closes once, after everything is saved.
- **A failed Unassign on the printer card said nothing** — Unassigning a spool from an AMS slot (built-in inventory or Spoolman) that the server refused showed no message, and the spool simply stayed assigned. The error is now shown.
- **The OBS stream overlay ignored live updates** — It read the printer's status updates from the wrong field, so it moved only with its 2-second refresh instead of in real time.
- **Uploading two files with the same name could show the wrong result per file** — When both were uploaded together, both rows showed the first file's result, so one that failed looked uploaded. Each row now shows its own file's result.
- **The queue timeline and history rows showed plate 1 for every plate** — A queued plate of a multi-plate file appeared with the file's first plate as its picture, while the queue list showed the right plate. All three now show the queued plate.
- **Inventory: removed the "Full" column** — It showed whether a spool had been added full, which nothing ever recorded, so every row read "-".
- **Spoolman: the print dialog's cost estimate uses the Spoolman spool's price** — In Spoolman mode, the print dialog estimated each slot from the built-in inventory's assignments, which hold nothing in that mode or rows left from before the switch to Spoolman. The estimate (and the budget check that uses it) came out at the default price per kg or at a spool no longer in the slot, and the "g left" shown for each slot was wrong the same way. Both now come from the spool bound to the slot, priced the way the print is charged: the spool's own price, else its filament's, else the default.
- **Spoolman: a print whose 3MF arrived late is charged from the 3MF** — A print that started before Bambuddy could fetch its 3MF (an "Untitled" print, a printer briefly unreachable) gets an empty archive that is filled in once the 3MF turns up. In Spoolman mode its filament was still charged from the AMS remaining-percentage change — in steps of 10 g on a 1 kg spool, nothing for a spool without a percentage, and nothing at all when no slot reported one at the start. The recovered 3MF's usage is now used, as the built-in inventory already did.
- **Spoolman inventory: Cost/kg shows the price prints are charged** — A Spoolman spool priced only through its filament (the spool itself has no price, or a price of 0) showed "-" or "0.00" in the Inventory's Cost/kg column and no price on the SpoolBuddy spool card, although every print off it was charged that filament price. Both now show it, the column marked "(filament price)"; the spool's own price still wins, and editing the spool does not copy the filament's price onto it.
- **Spoolman AMS syncs keep a spool assigned by hand, and say what they changed** — Three cases:
  - **A spool assigned to an AMS slot by hand** while the automatic Spoolman sync was waiting for Spoolman could be replaced by the spool the sync had read before. The syncs now change only the slots whose spool they found different, and only while the slot still holds what they read.
  - **The Sync buttons in Spoolman settings** changed slots without telling other open pages, and without updating the slot's filament preset, so the printer card could keep the previous spool's preset name. They now do both, as the automatic sync does.
  - **The Sync buttons** gave a newly created Spoolman spool the remaining weight of a built-in inventory spool last assigned to that slot before the switch to Spoolman, when the printer reported no weight of its own. That leftover weight is no longer used, as in the automatic sync.
- **Spoolman inventory: five requests refused or reported correctly** —
  - **Deleting a storage location while Spoolman was unreachable** counted its spools from the built-in inventory, found none, and deleted a location Spoolman spools still used. The delete is now refused until Spoolman answers.
  - **Printing labels for an archived Spoolman spool** failed the whole batch with "not found", as Spoolman leaves archived spools out of its plain spool list.
  - **An archived Spoolman spool could be assigned to an AMS slot** (or put on one by a tag link) and then charged the next print's usage. It is now refused, as in the built-in inventory.
  - **A slot assignment or tag link for an AMS number no printer has** failed with a server error, and the link had already written the tag to Spoolman. Such a request is now refused before anything is written.
  - **Resetting the "Total Consumed" counters** reported success even when some or all of them failed. The result now says how many failed, as the other bulk actions do.
- **A Git backup restore keeps "Reset Total Consumed"** — The backup did not include the point each spool's "Total Consumed" counter was reset at, so a restore brought every reset counter back to its full lifetime figure. It is now backed up and restored; a backup made before this keeps the reset points the spools already have.
- **A finished print's filament is charged once** — Two cases in the built-in inventory:
  - **An AMS update right as a print finished** could raise the spool's used weight from the AMS remain% while the print's exact usage was still being worked out, and that usage was then added on top: the print was charged twice. The AMS sync now waits until the print is charged, as it does while the print runs.
  - **A print the printer reported finished without any file name** (one that failed while preparing, right after Bambuddy started) kept the AMS weight sync off until the next print started. It now turns the sync back on.
- **Spool weights and slot assignments written at the same moment no longer undo each other** — Three cases:
  - **Assigning or unassigning a spool by hand, or adding a slot's spool to the inventory,** while the printer reported an AMS change for the same slot (or on a double-click) could fail with a server error on PostgreSQL. These now wait for the AMS update, as AMS updates already wait for each other.
  - **A weight set by hand or weighed on the SpoolBuddy scale** just as the AMS remain% sync ran could be overwritten by the AMS figure, with the weight still marked as locked.
  - **The same weight set at the end of a print** was replaced by the weight from before it plus the print's usage. The usage is now added to the stored weight.
- **Inventory views stay current, and spools follow their printers and slots** — Five cases:
  - **Deleting a spool** left it shown in its AMS slot in other open tabs, and **a weight from the SpoolBuddy scale, the automatic AMS sync or "Sync Weights from AMS"** reached other open tabs and the printer cards only when they next refreshed. These changes are now announced like any other inventory change, and the printer cards also show the weight a finished print leaves straight away.
  - **Deleting a printer** on SQLite (the default database) left its spools assigned to it, shown as loaded on a printer that no longer exists. Their slots are now freed, and assignments left behind by earlier deletes are cleared at the next start.
  - **A spool assigned to an empty slot from SpoolBuddy** that the printer could not be told about when filament went in (for example while it was reconnecting) was marked done anyway and never configured. It is now tried again on the next AMS change.
  - **A spool CSV import** stored a `last_used` time with a timezone offset as if it were UTC on SQLite; it is now converted.
- **Filament matching, preheat temperatures and colour names follow the plate's own filaments** — Three cases:
  - **An "Any model" job with a filament override** waited forever when the printers held an equivalent filament under another name (PA-CF loaded for a PA12-CF override). The type check already counted it as the same filament, but the colour check that picks the printer did not.
  - **Preheating a plate of a multi-filament project** heated the bed for the hottest filament of the whole project: a PLA plate in a project that also holds PETG was preheated, and kept warm between jobs, at the PETG temperature. Preheat and keep-warm now heat the bed for the filaments of the plate the job prints.
  - **Colour names on the queue page** came from the plain filament type, so a colour named differently in a product line (the same black is "Charcoal" in PLA Matte) showed the generic name. The queue page, and the colour name the print dialog saves with a filament override, now name it within the filament's product line, as the print dialog already showed it. Jobs queued before keep the name they were saved with.
- **Stopping and cancelling leave nothing running or reserved** — Four cases:
  - **Cancelling a pipeline run** set its queued jobs to cancelled, but a job already preheating went on heating the printer (up to its soak time), and its share of the cost centre's budget stayed reserved. Both now happen as when the job is cancelled from the queue.
  - **Stopping a job while its printer is offline** left its share of the cost centre's budget reserved until Bambuddy restarted; it is now released at once.
  - **A printer slow to answer the end-of-print file cleanup** (up to about nine minutes) held up the end of the print so long that the stranded-job check closed the job first, and its auto power-off and its charge were skipped. The cleanup now gives up after 45 seconds and leaves the file on the card.
  - **A print start the printer refused** is now logged with the printer's reason, and the job goes back to the queue for a retry at once. Bambuddy used to read the refusal as a print it accepted and waited three minutes for it to start.
- **Queue jobs added through the API reach the printers they should** — Three cases in the API and webhooks:
  - **A model in lower case** (`"target_model": "x1c"`) was refused with "No active printers for model", although the scheduler matches models without regard to case. Adding (one job, alternatives, or library files), editing and pipelines now match it the same way and store the printers' own spelling (`X1C`); two alternatives for one model in different case are refused as the same printers. A pipeline aimed at a model class in lower case found no printers.
  - **A reprint through the webhook** (`/webhook/queue/add`) of a print sent through the virtual printer ignored the AMS slots the slicer had picked, so the scheduler matched slots by colour and type again. It now reuses them on the printer they were picked on, as a reprint from the UI does.
  - **A multi-plate file queued without a plate** (`/library/files/add-to-queue`, `POST /queue/`) prints its default plate, but the scheduler required every plate's filament, so a printer with that plate's filament loaded was never chosen, or the job was held for another plate's filament. The plate that prints is now stored on the job.
- **Queue edits made while the queue is being worked through are kept** — The scheduler works on the queue as it read it at the start of each round, and a round can take minutes while a smart plug powers a printer on. A job edited in the meantime lost the edit: an AMS mapping set by hand was overwritten, a job moved to another printer (or an "Any model" job pinned to one) could still be sent to the printer the round had picked, and a new plate could be mapped from the old plate's filaments. A job edited during a round now waits for the next one, which reads the edit. A bulk edit likewise leaves a job that started dispatching while the edit was checked, instead of changing its printer or cost centre under the upload. While waiting for a printer to power on, the scheduler no longer keeps a database transaction open.
- **A print's filament and cost are charged with its own plate and AMS mapping** — Bambuddy remembers per archive which plate and AMS slots a dispatch uses, for the usage and cost charged when the print ends. Three cases used the wrong ones:
  - **A whole file queued after one plate of it** was sent but never started (refused, or the printer stayed idle) was charged as that plate, with its slots.
  - **A plate that failed to send** wiped the plate number and slots of another plate of the same archive still printing, whose end then charged the whole file.
  - **A reprint dispatched without a slot mapping** could be charged through the previous run's slots, when that run's printer had reported its own mapping.
- **A timelapse goes to the print it belongs to** — Several cases gave an archive the wrong video, or none:
  - **The next plate or a reprint started meanwhile:** the printer's timelapse is looked for for some minutes after a print ends. When the same archive started printing again in that time, the previous print's video went to the new print, and the new print's own video was then never imported. The search now stops once the archive is printing again, and nothing is attached or deleted from the printer.
  - **Scan for Timelapse on an older archive** (from before the video list was recorded at print start) could pick a video another archive already has, for instance by a short name like "1" that every video's timestamp contains. Those are now left out of the automatic match, and are still offered for picking by hand.
  - **Both the external camera's and the printer's timelapse on:** the archive keeps the external camera's video, as before, but the printer's video it replaces is now deleted instead of staying in the archive folder unused. A camera video stitched for a print whose archive is already printing again (the next plate, a reprint) is no longer attached to the new print.
- **Archives pages show a timelapse as soon as it changes** — Only the automatic scan told other open pages; a video picked or uploaded by hand, the external camera's, the conversion to MP4 and deleting one showed only after a reload.
- **An archive cost set through the API, or by Recalculate costs, reaches the statistics** — Setting an archive's cost (`PATCH /api/v1/archives/{id}`) or **Recalculate costs** changed the archive only, while statistics, project totals and batch sums read the cost from the print log, so they kept the old figure. A completed print that had the archive's cost now gets the new one too; a print priced from its own spools, and a failed or cancelled one, keep theirs. **Recalculate costs** still recalculates a cost that was set by hand, as before. A negative cost, or one over 1,000,000, is refused.
- **A request with `Infinity` or `NaN` in a field that fails validation answers 422** — Such a request ended in a server error, because the error response repeats the value sent and JSON can't hold it.
- **Editing an archive while it is being reprinted leaves the previous print alone** — Its outcome, failure reason, verdict and filament weight went onto the previous print's log entry, rewriting that print's result in the print log and failure statistics. The edit now changes the archive only.
- **Archives made without their 3MF show their colours and AMS-HT filament** — When a print's 3MF couldn't be downloaded at start, the archive took its filament from the printer's AMS report. Colours were stored as the printer reports them (`FF8800FF`), so their swatches on the Archives page stayed blank and the colour filter listed them apart from the same colour of other archives; they are now stored as `#FF8800`, like an archive with its 3MF, and existing archives and their print log entries are repaired on startup. Filament the print took from an AMS-HT was not found, so a print using only an AMS-HT got no filament.
- **An archive whose 3MF arrives later is priced from its spools** — Such an archive started with the default filament price, having no 3MF to estimate from at print start, and kept it when the 3MF was found during the print. It is now estimated from its spools then, as at print start; a 3MF found only as the print ends leaves the pricing to the print's end, as before.
- **An archive shows the nozzle temperature of the filament its plate prints** — The temperature was taken from the project's first filament, so a plate printing only PETG showed the PLA temperature of filament 1. It is now that of the plate's first used filament.
- **A print stopped while its printer was offline counts in the print log, and its real end replaces the stop** — When **Stop** couldn't reach the printer, the queue item and archive were closed as cancelled, but no print log entry was written, so the run was missing from the print log and failure statistics, and the Archives page kept showing it as printing until reloaded. The stop now writes the cancelled run and updates the Archives page. Should the printer report the print's real end on reconnect, that outcome replaces the cancelled entry, and the archive no longer shows **Completed** with the reason "Cancelled by user".
  - **One entry per run:** a printer reporting the same end twice (after a reconnect) logged the run twice, doubling it in the statistics. The repeat is now left out.
  - **A reprint's reason:** an archive whose earlier run failed kept that failure reason when a reprint completed. Each run's end now sets the archive's reason, or clears it.
- **A print Bambuddy didn't start is matched to its own archive** — At its end, such a print was matched to an archive whose name merely contained its name, so finishing "Clip" could complete (and bill) a "Cable Clip" still marked as printing; `_` in a name also matched any character. It now needs the same name, allowing for the printer writing spaces as underscores, cutting long names short, or reporting the file name for a print started on its screen.
- **Print start picks the print's own 3MF from the printer's folders** — When the 3MF couldn't be downloaded directly, Bambuddy searched the printer's folders and took the first file containing the print's name, so "Cube" could be archived with "Cube_large.3mf". A file named for the print is now taken, in whichever folder, and of several files that only contain the name, none.
- **The A1, A1 Mini, P1 and A2L built-in calibration is not archived as a print** — These printers report their calibration run as a bare `auto_cali_for_user_param.gcode`, not under the system path other models use, so Bambuddy archived each run as a print (without a 3MF) and announced it. It is now recognised as the printer's own job. The printer kill switch still stops it on these models, since nothing tells it apart from a file given that name: switch the kill switch off to calibrate them.
- **A notification channel limited to one printer gets that printer's events only** — A job added for **Any <model>** or not yet assigned, and any job waiting (for filament, a plate, a printer), were sent without a printer, so no printer filter applied: every channel limited to a printer received all of them, other printers' included. A job that waits on a printer now names it, and reaches that printer's channels; one with no printer yet goes to channels set to all printers, and a channel limited to one printer hears of it once it is assigned to or started there. A power alert from a plug linked to no printer likewise goes to channels set to all printers. Events about the whole setup (the queue finishing, stock, app messages) still reach every channel.
- **Queue drying pre-dries in blocking mode** — With **Wait for drying to complete** on, a new drying cycle was refused on any printer with a pending job, scheduled ones included, so queue drying never dried anything ahead of a scheduled print. Only a job that could start now keeps a new cycle off; a printer whose job is scheduled for later is dried ahead of it, and the job still waits if the cycle has not finished by then.
- **An "Any model" job waiting for a drying printer says so** — It read "Busy: X1C-01", as if that printer were printing; it now reads "Busy: X1C-01 (drying)", as a job for that printer does.
- **An H2D shows the right active slot after a filament change** — An H2D reports its active slot as a bare number and names the AMS in each nozzle's own data, often in the same message. That message's AMS part was read first, against the previous message's nozzle data, so after a swap the card (and usage tracking) could keep pointing at the old slot until the printer reported its slot again. The nozzle data is now read first, and nozzle data from an earlier message no longer overrules the slot the printer just reported.
- **Home Assistant "Run when printer turns off" scripts run when Bambuddy switches the printer off** — Linked scripts ran only when someone switched the printer's plug by hand. Auto-off after a print or drying (also when resumed after a restart), the plug's schedule and AI failure detection turned the printer off without them, and the schedule turned it on without its "on" scripts. They now run on all of these. "On" scripts keep running at every print start as before. For these automatic switches only a plug that powers the printer counts, the scripts run once when two plugs feed the printer, and a script whose **Enabled** toggle is off does not run (by hand either). Failure detection no longer tries to switch off a script.
- **A plate check that could not run says so** — When the camera gave no image, the analysis failed or there was no calibration to compare against, the check before a print reported an empty plate, logged "Plate is empty" and told nobody. The print still goes ahead, but users who can control printers now get a warning with the reason, the log records it, and **Check Plate** shows it instead of "Plate appears empty".
- **The archive recovery download gives a large 3MF time** — The retry that fetches a print's 3MF when the first download failed gave up after a flat 90 seconds, so a large file on a slow SD card never made it. Once the printer reports the file's size, the deadline follows it (up to 15 minutes), as the first download's already did.
- **A broken MakerWorld download is not kept** — Only the HTTP status was checked, so a truncated file or an error page served as a success was stored as the model's 3MF. It is now refused unless it is a readable 3MF.
- **An upload the printer never confirmed is checked** — When the printer's "transfer complete" reply does not arrive (an H2D can take over 30 seconds), the upload still counts, but its size is now read back on a new connection and a mismatch is logged as an error.
- **The queue bulk edit says when it changed nothing** — The result was a neutral, English-only message even when no job was updated. It is now translated, and shown as an error when nothing was updated and as a warning when some jobs could not be changed.
- **CallMeBot gets the phone number as written** — The phone number and API key went into the request unencoded, so "+49 151 ..." arrived without its "+".
- **A plate printed only from the external spool starts without the AMS on multi-plate files too** — The queue already sends such a plate with the AMS off (#3087), but when another plate of the same file used an AMS slot, the print command turned the AMS back on and the printer refused the job, also for a job whose AMS was already switched off. The plate's own answer now stands.
- **A Silk spool no longer takes a slot's Matte preset** — A spool without a slicer preset reuses the filament preset already in the slot when the material matches, to keep a calibrated preset, and so does **Configure Slot** for a preset without a filament id. That now also requires the finish to match when both name one (Basic, Matte, Silk, HF, ...); otherwise the slot gets the generic preset for the material and finish, such as Generic PLA Silk for a Silk+ spool. The generic fallback picks the finish's own generic in Spoolman mode too (Generic PLA Silk, PLA High Speed, PETG HF).
- **A virtual printer for any printer of a model keeps the AMS on** — It stored the slicer's AMS on/off with the job. The slicer was looking at the virtual printer, which has no AMS, so that choice did not describe the printer the job went to. Only a virtual printer with a target printer keeps it now.
- **The K-profile filament names from Bambu Cloud read a preset's id from either place** — The name lookup read a cloud preset's filament id only from the response envelope, while slicing also looked inside the preset itself; a preset with the id only there showed its raw id.
- **A K-profile chosen on purpose is no longer undone when the AMS reports a change** — When a spool with a stored K-profile sat in a slot, an AMS report that changed the slot (its remaining amount, for example) set it back to the stored profile, so one picked in Bambu Studio or on the printer's screen did not last. That re-apply is gone: the existing lost-profile check puts the stored profile back when the slot has lost its selection (the default K after a reset or power cycle) while the printer is idle, and leaves a deliberately chosen profile, a chosen **Default** and the other nozzle's calibration alone.
- **K-profile commands no longer change the shown nozzle size** — The printer's answer to saving, deleting or selecting a K-profile names the nozzle size of that profile, and Bambuddy took it as the installed nozzle. Only the printer's status updates the nozzle now.
- **A K-profile save says when the printer did not confirm it** — A save, batch save or delete the printer did not acknowledge was reported as done. It now says the profile was sent but not confirmed (older firmware never answers), and an import or bulk delete says how many of its writes went unconfirmed. An edit on a single-nozzle printer, which removes the profile and adds it again, reads the printer's table back and fails when the edited profile is not there.
- **Stopping drying says the command was sent** — The toast said "Drying stopped" as soon as the command went out; it now says "Stop command sent".
- **A skip the printer refuses or never applies is logged** — Skipped objects were marked skipped the moment the command was sent. A refusal from the printer now takes them back off the skipped list and is logged with the printer's reason, and a skip the printer has not listed after a minute is logged as unconfirmed.
- **The printer card shows a nozzle change, firmware update or developer-mode switch at once** — These were left out of the live updates and only reached the card with the 30-second refresh or a page reload.
- **The print slot labels on AMS slots show up** — While a print runs, each AMS slot the print uses is meant to carry a small "P1 / P2" label, so a job sent to a printer with the wrong filament stands out. The labels read the print's mapping from the printer's own status, which almost never carries it, so they rarely appeared. Bambuddy already records the mapping from the print command, and the labels now use it. They stay on when Bambuddy is restarted while the print runs. A print started from the printer's screen after a job that never started (refused, or cancelled before printing) no longer inherits that job's mapping, which usage tracking read as well.
- **Drying no longer offers spool rotation on an AMS with filament in the feed tube** — **Rotate spool during drying** was disabled only for the tray state that means "loaded" on some firmware, so on others it stayed available and the printer refused the drying start. The slot the printer reports as loaded, and on two-nozzle printers the slot each nozzle is fed from, now count too.
- **The run-out hint names the slot on two-nozzle printers with several AMS** — When a print paused for filament, the hint often said to check the printer screen, because the slot number alone does not say which AMS it is on. The AMS wired to the active nozzle now settles it; with the Filament Track Switch, where an AMS can feed either nozzle, the hint still asks.
- **A regular AMS is never shown as an AMS-HT** — An AMS was taken for an AMS-HT when it reported a single tray. The unit number (128-135 for AMS-HT) now decides, on the printer card and its slot labels ("HT-B" became "AMS-B"), in the AMS Filament Backup view, print mapping, the slicer's loaded-spool list and the queue. A regular AMS that reports only some of its trays shows each one in its own slot rather than in list order.
- **A print stopped by the printer kill switch is archived as cancelled** — The printer reports a stop as failed, and only stops made from Bambuddy were turned into cancelled, so every print the kill switch stopped went into the failure statistics as a failed print with no reason. It is now cancelled, with the reason **Stopped by the printer kill switch**, which the archive editor also offers.
- **A queue job stopped while its printer was offline is counted as a user cancel** — Its archive stored an English sentence as the failure reason, which showed untranslated and counted as a cause of its own in the failure statistics. It now stores **User cancelled**, like every other stop; existing archives are converted on startup.
- **Saving the SpoolBuddy backend config says it needs a restart** — The device writes a new backend URL or API token to its config file but keeps using the old ones until its daemon restarts, while the settings page only said "Config queued." It now says a restart applies it and offers **Restart Daemon**, which waits until the device has taken the config so the restart cannot replace it.
- **A re-sliced archive reads as not printed and shows a cost** — Re-slicing an archive created a new archive marked "completed", so it appeared under **Printed** and was counted as a finished print although nothing had printed. It is now "archived" (shown as **Not printed**), like any file archived without printing, and it shows an estimated filament cost like other archives with grams.
- **A reprint of a single-plate archive no longer leaves the old timelapse behind** — A timelapse attached by hand, or before Bambuddy recorded plates, was always kept as an unlinked file on a reprint, since on a multi-plate archive it can be another plate's only copy. On an archive with one plate there is no other plate, and it is now deleted with the run it belonged to.
- **A GitHub backup restore checks the numbers it restores** — Grams, costs, energy, print times and spool-usage weights were copied from the backup as they were, so a damaged or hand-edited backup could put text, negative or absurd values into the totals. Anything that is not a valid number (grams at most 100000, as the archive editor allows) is left empty, and the restore summary says so. A quantity of 0 (a ruined plate) is kept instead of becoming 1.
- **A print resumed after a restart keeps its plate height** — Each way Bambuddy picks up a running print (new archive, expected print, restart resume) remembered it under a different set of names. When the printer later reported a name that path had left out, the finished print was still found but lost its binding, and with it the height the plate restore uses after a restart. Every path now remembers the same names.
- **An "Any model" job gets a fresh nozzle mapping on a nozzle-rack printer** — A nozzle mapping stored on a model-based job (through the API or an order's plate spec) was sent unchanged to whichever H2C picked it up, instead of the rack positions of that printer. It is now worked out for the printer that takes the job. On printers without a rack, such as the H2D, where the mapping means left and right nozzle, it is kept.
- **A used weight entered for a new spool is kept** — Adding a spool (one, several with **Add copies**, or from a CSV) left its weight unlocked even when a used weight was entered, so the automatic AMS sync could overwrite a part-used spool's weight on its first pass. A used weight entered at creation now locks the spool, as editing the weight already did. A negative used weight is refused; more than the label weight is still accepted, since a mis-labelled spool really can give more.
- **Spoolman's "last used" means a print used the spool** — Every AMS sync stamped *last used* on every loaded Spoolman spool, as did clearing a removed spool's location and weighing on the SpoolBuddy scale. Only print usage sets it now (through Spoolman's own usage endpoint), as in built-in inventory.
- **The AMS slot K-profile picker accounts for the nozzle's flow** — On printers that report a high-flow or standard nozzle (H2-series), the picker offered and pre-selected K-profiles measured on the other kind, which are not applied when the slot is configured. They now sit under **Other**, and every profile shows its flow ([HF] / [S]), as in the spool form.
- **Printer temperature history retention can be set, and no retention setting can wipe history** — How long the nozzle, bed and chamber temperature history is kept had no setting in the interface; it now sits next to the AMS history under **Settings → Filament → History Retention**. Both settings take at least one day: 0 or less was accepted through the API and made the daily cleanup delete all history, and a value stored that way is now read as one day.
- **Bug reports no longer keep the reporter's email** — Every report sent from Bambuddy was also stored locally with the email it was sent with, and nothing ever read or removed it. The email still goes with the report; the local record keeps only the outcome, and emails stored before are cleared at startup.
- **Unused API pieces removed and the rest documented** — The firmware upload no longer broadcasts a WebSocket progress message nothing listened to (the page polls the upload status, as before); the old route that deleted every plate-detection calibration of a printer at once is gone (references are deleted one at a time from the plate-detection dialog); `/spoolbuddy/calibration` now opens the SpoolBuddy settings page, where calibration lives. The wiki now documents `POST /archives/upload-source` for slicer post-processing scripts and `PUT /local-presets/{id}`.
- **Load and Unload work on an AMS-HT** — Clicking **Load** on an AMS-HT slot was refused with "tray_id must be 0..15 …": the printer card numbered the slot like a regular AMS (unit × 4 + slot, 512 for the first AMS-HT), and the printer's commands would have turned the AMS-HT into a unit it does not have. **Unload** while the AMS-HT was the loaded tray was addressed to that same non-existent unit. Both now address the AMS-HT by its own unit number, as Bambu Studio does, and **Unload** from an AMS-HT slot's menu is aimed at that slot. Loading from the A2L's AMS-Lite now sends the target Bambu Studio sends as well.
- **A second Bambuddy on the same machine no longer cuts the camera every minute** — Bambuddy's once-a-minute cleanup kills camera ffmpeg processes left behind by a crash or restart, and recognised them by their command alone. Another Bambuddy on the same host (a second install, a test instance) runs the very same command, so each one's cleanup killed the other's live camera once a minute and the view reconnected. Only an ffmpeg started by this Bambuddy, or left orphaned by an earlier run, is cleaned up now.
- **A restart with a camera view open no longer logs errors** — A camera stream never ends by itself, so a restart closes it after 5 seconds. Each stream closed that way was logged as an ERROR with a full traceback ("Exception in ASGI application ... timeout graceful shutdown exceeded"), which looked like a crash in the log and in support bundles. It is now one INFO line per stream, and the "Cancel N running task(s)" line before them is INFO too; real errors are logged as before.
- **Archive export includes the whole end day, and an invalid print speed is refused** — `GET /api/v1/archives/export?date_to=2026-10-15` read the date as midnight and left out everything printed that day; a date on its own now ends with that day, as in every other date filter, and a date and time with a UTC offset is converted to UTC. The Archives page was not affected, because it never sends dates. `POST /api/v1/printers/{id}/print-speed` with a mode other than 1-4 answered 500 "Failed to set print speed"; it now answers 422.
- **AMS drying now applies to "Any <model>" queue jobs** — With **Wait for drying to complete** on, a job for "Any X1C" could still start on an X1C whose AMS was drying, and its drying was never stopped for the print; queue auto-drying also never dried anything for such a job. Now a model job passes over a drying printer for another of the model, and waits only while every one of them is drying. The printer it lands on stops drying like it would for a job pinned to it, and a scheduled model job has queue auto-drying dry every printer it could run on.
- **Every way of adding a queue job now works like the print dialog** — Jobs added from File Manager's **Add to queue**, the webhook, a virtual printer, a pipeline run or an order's **Dispatch remaining** sent no "Job added" notification and no MQTT `queue/job_added` event; now every path sends them. Several jobs added at once are one notification per printer, such as "3 jobs (bracket, hinge, lid)", and MQTT gets one event per job. File Manager, the webhook and pipeline runs ignored the default print options (timelapse, bed levelling and the rest) and now use them. The copies an order dispatches lost their cost centre, so they were billed to none and never checked against its budget; they now keep it, and with billing on, dispatching is refused when you may not print with that cost centre or its budget cannot cover every copy. A `scheduled_time` sent to the API or webhook with a UTC offset, such as `10:00+02:00`, was stored as 10:00 UTC and the job started two hours late; the offset is now converted.
- **Long prints keep their layer timelapse** — Stitching a layer timelapse was stopped after 5 minutes and its frames were then deleted, so a print with more than a few hundred layers on a Raspberry Pi lost its timelapse for good. Stitching now gets half a second per layer, from 5 minutes up to an hour. If ffmpeg fails anyway, or Bambuddy stops while it runs, the frames are kept for about 24 hours with an ffmpeg command to make the video by hand; when ffmpeg fails, the log names the folder. Without ffmpeg the frames are still deleted.
- **An in-app update that hangs no longer blocks further updates** — A stalled `git fetch`, `pip install` or `npm install` left the update showing "downloading" or "installing" forever, and every new attempt was refused with "Update already in progress" until Bambuddy was restarted. Each step now has a time limit (5 minutes for git, 15 for pip and npm); a git or pip step that runs out of time ends the update with an error, and checking for updates again lets you retry. When pip or `git reset` is the one that ran out of time the new code may already be in place, so run the update again before restarting. A frontend build that runs out of time keeps the files shipped with the release.
- **The plate picker downloads a printer's 3MF once** — Opening a 3MF in the printer's file browser downloaded the whole file again for the plate list and for every plate thumbnail, all at once: a ten-plate 60 MB file meant eleven full downloads, slow on any printer and slower still on an A1. The plate list, plate thumbnails and G-code preview now share one download and keep it for a minute (the 3D view still fetches its own copy).
- **Printer file downloads tell a missing file from a failed one, and big files get the time they need** — Downloading a file from the printer, and the file browser's previews (G-code, plates, plate thumbnails), treated every failure as "File not found", including a slow transfer of a file just listed. Bambuddy now answers "not found" only when the printer says the file is gone, and otherwise that the download failed or took too long; the download's message and the timelapse messages show which. A file download was also held to 10 minutes whatever its size, so a 250 MB camera recording on a slow link always failed, and the previews to 5 minutes; both may now take as long as the file's size calls for, up to the 30-minute limit. A timelapse that could not be downloaded is reported the same way instead of as a server error.
- **A timed-out printer download no longer runs on beside its retry** — When a timelapse download ran out of time, it kept going in the background while the next attempt opened a second connection to the printer. The transfer is now stopped first, and a download that already had the time its size allows is not retried.
- **Large STL files no longer freeze Bambuddy while their thumbnail is made** — Uploading an STL, extracting a ZIP of STLs, generating missing thumbnails and scanning an external folder rendered each thumbnail in a way that held up everything else, so a high-poly model froze the web interface and printer updates for seconds or longer. Thumbnails are now made in the background, one at a time.
- **A frozen external RTSP camera is reconnected** — When an external RTSP camera stops sending, `ffmpeg` can keep repeating the last picture, so the live view and `/camera/status` kept showing a picture that had stopped changing, and so did anything reusing the live frame (timelapse frames, finish photos, Obico). Like the printer's own camera, an external RTSP camera that sends the same picture for 20 seconds is now reconnected. A camera that is simply slow to change (a slow source, or a smart codec on a static night scene) is restarted at most once, after which Bambuddy waits three times the longest gap it has seen, up to 5 minutes; a picture that really does not change is re-checked every 5 minutes.
- **A USB camera can be watched from several places at once** — Every viewer of an external camera opened its own connection to it. A USB camera can only be read by one program at a time, so opening the Camera page while a Cam Wall tile (or another browser) was already showing it gave a blank picture. External cameras now share one connection per printer, like the printer's own camera, which also means one connection per MJPEG or snapshot camera and one `ffmpeg` per RTSP or USB camera instead of one per viewer. As with the printer's own camera, the viewer who opens the connection sets its frame rate: with a Cam Wall tile already showing the camera, the Camera page gets the tile's 8 frames per second until everyone has closed it.
- **Camera snapshots and the camera test no longer fail while someone watches the live view** — A USB camera can be read by one program at a time, so while a viewer was watching, every snapshot Home Assistant or the camera wall fetched from an external camera failed, and the external camera's **Test** button failed too. Snapshots now return the live view's frame, and the Test button reports the camera working from that frame. While the live view is still starting, a snapshot asks the caller to try again a moment later instead of taking the camera from the viewer (the camera wall and the camera page now retry once on their own); this now applies to the printer's own camera as well. An external camera with its own snapshot URL is still fetched from that URL.
- **USB camera photos are no longer killed mid-capture** — A cleanup job that runs every minute stops leftover camera processes, and it did not know about the one-shot USB capture behind finish photos, timelapse frames and snapshots, so it sometimes killed one in progress. It also stopped any other program's `ffmpeg` reading a USB camera on the same machine; it now only stops Bambuddy's own.
- **The camera Test button shows the resolution properly** — It read "Camera connected640x480"; it now reads "Camera connected (640x480)".
- **Admins can remove a locked-out user's 2FA from Edit user** — The wiki described this, but Edit user had no control for it, so a user who lost their authenticator stayed locked out unless an admin called the API by hand. **Settings → Users → Edit user** now has **Disable 2FA**, which asks for the admin's own password (admins who sign in through LDAP or SSO usually have none and are not asked) and says whether the user had any 2FA to remove.
- **The AMS drying button knows a printer cannot dry from the first page load** — After a page load and every 30-second refresh, the printer card didn't know the drying status or why drying wasn't possible, so a printer that cannot dry showed an enabled Start button until the next live update (the printer still refused the start). The page load and the live updates now describe AMS units and external spools in exactly the same way. A slot the firmware reports as only its number now also counts as empty from the first load, and the AMS temperature no longer switches between "24°C" and "24.0°C".
- **The filament override picker keeps both external spools of a dual-nozzle printer without an AMS apart** — On an H2D or X2D feeding only from its external spools, identical spools on the left and right merged into one entry that was offered for both nozzles. The picker now uses the same dual-nozzle check as the print scheduler, so each external spool is offered only for the nozzle it feeds.
- **A2L: filament used from the AMS Lite is charged to the right spool** — The printer names an AMS Lite tray by its local slot 1-4, and Bambuddy kept that number when it recorded which trays a print used, so the AMS Lite spool was never charged. With a regular AMS beside the AMS Lite, the usage went to that AMS's slot of the same number instead. A virtual printer with **Save AMS mapping** on stored the same local number for queued prints and their archives; with a regular AMS present, such a print was sent to that AMS instead of the AMS Lite.
- **Proxy virtual printers no longer restart when another virtual printer is saved** — Creating, editing or deleting any virtual printer restarted every running proxy-mode virtual printer, dropping the slicer's connection and any upload in progress. They now restart only when their own settings change. Changing a printer's IP now restarts the proxy virtual printers aimed at it on the new address; before, they kept forwarding to the old one until a virtual printer was saved. Renaming a virtual printer now restarts it, in every mode, so the slicer sees the new name; before, a running virtual printer kept advertising its old name until Bambuddy restarted.
- **Prints queued through a virtual printer keep the slicer's nozzle choices** —
  - **Nozzle offset calibration** from the slicer, or the default from Settings → Workflow, is used. It always ran on "Auto".
  - **H2C rack nozzles** picked in the slicer are kept only by a virtual printer bound to one printer. A virtual printer for any H2C sent those positions to whichever H2C took the job, whatever that printer's rack held; the dispatch now picks them from that printer's rack.
  - **A job the queue moves to another printer**, or releases back to the pool, no longer takes the old printer's nozzle positions along.
  - **AMS on or off** from the slicer is used when the slicer's options arrive in time; it was used only when they arrived late.
  - **A slicer AMS mapping that arrives late** is no longer put on a plate of a multi-plate send that it cannot reach; that plate gets a computed mapping, as when the options arrive in time.
- **Settings that were not saved or not used** —
  - **Max copies per run** (Workflow) and the Docker compose directory used in the update instructions are saved. They changed on screen and were never sent, so a 100-copy pipeline run stayed refused at the old limit of 50.
  - **Default printer** (General) is now selected in the print dialog when it opens, unless the file was sliced for another model or the job goes to a model rather than a printer. The setting was saved and never used.
  - **Auto-archive prints** (General) now switches archiving off for every printer, for prints started outside Bambuddy. While it is on, each printer's own switch decides. Before, only the printer's switch was read. A printer's own calibration runs no longer send a "print started" notification while archiving is off.
  - **Create Archive Entry When Printing** (File Manager) is removed. It was saved and never used: printing from the File Manager always creates an archive entry.
- **A spool Spoolman creates from the AMS is the size of the roll** — a 250 g refill matched to an existing 1000 g filament was created as a 1000 g spool with 250 g left, showing as 75% used.
- **An unregistered SpoolBuddy that is still running registers again on its next heartbeat**, as the documentation says. It stayed missing until the daemon or the Pi restarted, and the refused heartbeats filled its send buffer, which then held back everything queued behind them.
- **SpoolBuddy installer, full mode, installed under /home** — the Bambuddy service it writes now starts. The service hid /home from itself and failed with 203/EXEC, as the main installer's did before #1685.
- **Spoolman costs** —
  - A failed or stopped print in Spoolman mode is logged in Print History with what its Spoolman spools cost for the filament it used, as with the built-in inventory. It was logged with no cost.
  - The estimated cost of a queued library file is priced from the Spoolman spools in the trays it maps to. Every slot was priced at the default filament cost.
- **Spoolman usage** —
  - A failed or stopped single-filament print that switched to the AMS backup spool charges each Spoolman spool its share, as a completed print and the built-in inventory do. All of it went to the spool that ran out.
  - Two copies of the same archive printing at once on two printers are both charged to Spoolman. The second print's start failed on the shared archive and that print was never deducted.
  - A filament slot the print does not feed is no longer charged to the external spool, or to whichever AMS tray sits at that position, as with the built-in inventory.
- **Spoolman slots** —
  - Assigning or linking a Spoolman spool to an AMS slot is now checked against what the printer reports back, as with the built-in inventory. A printer that ignored the new filament showed no "not confirmed" notice, and later usage went to the wrong spool.
  - Configure AMS Slot opens with the slicer preset set on the Spoolman spool when no per-printer-model preset applies, and the slot's K profile is matched under it. Before, the dialog opened with no preset and the K profile was matched against the tray's own filament.
- **Spool slots** —
  - Archiving a spool, one or in bulk, unassigns it from its AMS slots, with the built-in inventory and with Spoolman, and slots still held by spools archived earlier are released on update. The slot kept showing the archived spool and charged it the next print's usage. A Bambu Lab spool's tag still in the AMS after archiving is not given to another spool or turned into a new one. With Spoolman, a spool feeding a running print keeps its slot until the print's usage is reported.
  - Deleting a Spoolman spool removes its slot assignments too, and a spool archived or deleted in Spoolman itself releases its slots after the next print on that printer. The slot kept pointing at a spool Spoolman no longer had.
  - Printer cards and slot lists update right away when a Spoolman spool is archived, deleted or unassigned.
  - **Sync** and **Sync all** in Settings → Spoolman no longer unlink a slot that reads empty while its printer is printing (a runout), or one the AMS still reports as holding a spool.
  - The spool list in the Assign dialog updates right after a Spoolman assignment, so the spool just assigned is no longer offered for a second slot.
  - **Restore** on an archived spool inside an expanded group row of the inventory table works. It did nothing.
- **Spool weights from the AMS** —
  - **Sync Weights from AMS** and **Sync Spoolman Weights from AMS** leave the spools of a printer that is printing alone, and say how many. Synced halfway through a print, that print's usage was counted twice at completion.
  - A spool weighed on the SpoolBuddy scale is locked like one whose weight was set by hand, so the automatic AMS remain% sync no longer overwrites the measured weight.
  - **Sync Weights from AMS** now also updates locked spools and releases their lock. Nothing else could release it, so a spool whose weight was once set by hand was skipped by the sync for good.
- **SpoolBuddy** —
  - The Write Tag page no longer stays on "Writing tag..." when the tag was written but could not be linked to the spool. It shows why: Spoolman not set up, linking in Spoolman failed, or the spool no longer exists.
  - A scanned tag that cannot be looked up because Spoolman is unavailable, or because the lookup failed, now says so in the kiosk status bar for a few seconds. Before, nothing happened.
  - With Spoolman switched on and its URL refused by Bambuddy's address check, tag lookups, tag writes and scale weights no longer fall back to the built-in inventory, where they found or changed a different spool. They report Spoolman as unavailable, and Write Tag says so. Switched on without a URL still means the built-in inventory, as everywhere else.
  - Removing a SpoolBuddy device updates the device list right away.
- **Archive status in Edit Archive** — the list offers Completed, Failed, Aborted and Cancelled. Choosing "Cancelled" used to save "aborted", which the statistics count as a failure, and a cancelled archive opened showing "Completed". An archive can no longer be set to "Printing" by hand, which had it closed again at the next reconnect as a missed print, with notifications and an extra Print Log entry. The archive card labels an aborted print "aborted" and now also marks a cancelled one, which looked like a normal completed print. Moving an aborted print to Cancelled keeps its recorded reason; marking a cancelled print Completed clears it.
- **Archive costs** —
  - **Recalculate Costs** and **Rescan** price one print of the archive. An archive printed three times was given the cost of all three. Usage recorded without a price is priced at the default filament cost instead of counting as free. Print History and the statistics still count every print with its own cost.
  - Editing an archive's filament weight now reprices it, on the card and on the print it was copied to.
  - A spool without a price is charged at the default filament cost when the print completes. With the default never saved, completion priced it at nothing while the Settings page showed 25 per kg, and Recalculate later used 25.
- **A print of a file whose last print was never closed gets its own archive** — an archive left on "printing" because its end was missed used to take over the next print of the same file for two hours, so that print got no history entry, timelapse or cost estimate of its own. A different job id from the printer now marks it as a new print, except when it is Bambuddy's own reprint of that archive.
- **Filament of a print that spans a Bambuddy restart is no longer counted twice** — when the restart found no saved print session, or one of another print, the AMS remaining-% sync raised the spool's used weight during the print, and completion then added the print's full usage on top.
- **A print whose dispatch failed no longer leaves its cost centre behind** — the next print of the same archive without a cost centre of its own was charged to it, instead of the user or the archive's cost centre.
- **Which plate of a multi-plate file printed** —
  - Print History logs the filament and cost of the plate that printed. A reprint of another plate of the same file used to log the first plate's estimate.
  - Filament usage after a Bambuddy restart mid-print is charged for the plate the queue job printed, not for the plate of the archive's first print.
  - A print started outside Bambuddy records its plate on the archive when the printer reports it, so reprints, usage and Print History use that plate instead of the first one or the whole file.
  - The archive's thumbnail and details describe the plate Bambuddy sent, also when the printer reports only the file name or names another plate.
- **Reprints and their archives** —
  - A reprint that completes no longer keeps showing why the previous run of the same archive failed (for example a clogged nozzle).
  - A queued job whose archive was deleted before it started is now archived anew when it prints, on a printer that archives its prints. Before, the print ran with no archive, no start notification and no usage tracking.
  - A timelapse deleted while it was being converted to MP4, or replaced by a reprint's in the meantime, no longer comes back when the conversion finishes.
- **Print dialog fixes** —
  - **Print Anyway** in a print to several printers now only waves through the printers whose filament warning it answered. Before, it went onto every selected printer, so one that was never checked also skipped the scheduler's filament checks.
  - A job with printer alternatives whose plate dropdown was left untouched showed **Plate 1** but was queued with no plate, so it asked for every plate's filaments and the whole file's print time and could find no printer.
  - On H2D and H2C, the nozzle shown for each filament now comes from the chosen plate, not from all plates of the file, which could match trays on the wrong nozzle.
  - A sliced 3MF named without `.gcode` (a plate exported from Bambu Studio) can now be dropped on a printer card or picked in **Upload for Print**. An unsliced 3MF is refused with a message saying so.
- **Orders and groupings show as finished however their last job ended** — An order or grouping was only re-checked when a print completed, an item was deleted or one was edited. A grouping whose last job was cancelled or stopped, or whose jobs were cancelled because their library file was deleted, an order whose last run was closed by the stuck-print cleanup, and one whose last open job failed before it reached the printer or was deleted, stayed **active** until the next restart. They are now re-checked on every way a job ends.
- **A job cancelled while it is being sent stays cancelled** — Cancelling a queued job during its upload (the edit dialog even asks you to cancel a job that is being sent) was overwritten when the upload then failed: the job turned into a failure, a failure notification went out, and the next job that needs the previous print to have succeeded was skipped. A failure is now only recorded for a job that is still waiting or printing, and the upload toast of a cancelled job closes instead of spinning. Likewise, a job stopped just as its printer turned busy is no longer put back in the queue, and a stopped job whose nozzle rack pick no longer fit no longer leaves its file on the printer.
- **"Only if the previous print succeeded" looks at the right printer** — For a job queued for any printer of a model, the check ran before a printer was chosen, against jobs with no printer, so it nearly always let the job go, even onto a printer whose last print had failed; when it did trigger, the job was skipped for good. It now checks the printer it is about to use, passes over one whose last print failed and takes another of the model, and waits if every free one failed last. The queue then shows a **Resume after failure** banner for that model, which clears the gate on its printers, and the "job waiting" notification also goes out when a job that waited for a busy printer comes to wait on such a failure. On PostgreSQL, a job cancelled without an end time (cancelling an order, a pipeline or a kept order run) also counted as the latest print and hid a real failure before it; such cancels now record their end time, and the check no longer ranks a missing one first.
- **A queued job moved to another printer no longer keeps the old printer's settings** — A job's AMS tray mapping, **Print Anyway** and nozzle choice are worked out for one printer. Moving jobs to another printer (bulk edit, or editing one job) kept them, so a job could print from the slot that held the right material on the old printer but another colour on the new one, and a **Print Anyway** given for the old printer skipped the new printer's filament checks. **Dispatch remaining** of an order also pinned every copy of a job queued for any printer of a model to the printer its latest run happened to land on, with that printer's settings, so the other printers of that model stayed idle. These settings now stay with the old printer and are worked out again for the new one; plate, AMS use, filament overrides and print options are kept. Bulk edit leaves jobs with printer alternatives alone, as editing one does, and a job it moves to a printer no longer also waits for a model.
- **Pages work for users without the settings permission** — Users in a group without **settings:read** could not read the install settings, so pages that need a few of them fell back to defaults. With billing on, the print dialog hid the cost centre picker and the print was then refused for lacking one. The print dialog also lost its print option and stagger defaults, currency and filament preference. The queue showed the wrong order with shortest job first on, the File Manager lost **Slice**, filament warnings an administrator had turned off still appeared, adding an unknown spool from its tag put it in the built-in inventory even in Spoolman mode, and the theme, currency and forecast lead time fell back to defaults. These settings now reach every signed-in user, without the credentials **settings:read** also shows; G-code snippets are only reported as set or not.
- **SpoolBuddy writes the Spoolman spool to the tag in Spoolman mode** — Built-in spools are kept after switching to Spoolman. When one of them had the same id as the Spoolman spool being written, SpoolBuddy wrote the built-in spool's material, colour and weight to the tag and linked the tag to that hidden spool, while reporting success. The Spoolman spool never got the tag, so scanning it later found nothing. Writing a tag now uses only the inventory in use.
- **Budget held by prints that ended is released** — Before a print without a user (authentication off, or its user deleted while it printed) was charged to its cost centre, it kept its budget reservation for good, so the cost centre showed that much less budget left. At the next start, reservations of prints that have finished or were removed from the queue are released. Only the reserved amount is freed; charges already booked don't change.
- **A pipeline run remembers how each copy ended** — A copy a slicer pipeline sent to the queue only showed its outcome while its queue entry existed. Once the entry was deleted (from the queue page, with its archive, or with its user) the run could no longer tell a printed copy from one that never ran: it stayed **dispatching** forever, and **Retry failed** could not tell what to retry. Each copy now keeps its final state (completed, failed or cancelled) when its queue entry ends, and removing a copy that hadn't printed yet counts as cancelled. Copies whose entry was already gone before this update show as **unknown**: never retried, and counted as finished, so the run completes.
- **Deleting a spool keeps its usage history, and a new spool no longer takes over a deleted one's** — On PostgreSQL, deleting a spool deleted its usage history, so **Recalculate costs** replaced the real spool cost of its prints with an estimate. On SQLite the history stayed, but the next spool created could get the deleted spool's number and then showed its prints and consumption as its own. The usage history now stays on both databases without a spool, the prints keep their spool cost, and spool numbers are never given out again on SQLite. A Git backup restores such history as well. Supplier and material statistics leave out usage of deleted spools, as there is no spool left to count it for.
- **Archives a spool was used for can be deleted on PostgreSQL** — With PostgreSQL, deleting an archive for good (deleting it with **purge from statistics**, the automatic archive purge with that option, or deleting a printer together with its archives) failed with a server error when a spool from the inventory had been used for that print. The spool's usage record now stays and only loses its link to the deleted archive, on both databases; on SQLite, usage records still pointing at an archive deleted earlier are cleared of that link at the next start. **Recalculate costs** no longer charges usage records without an archive link to archives by their print name: that added the spool cost of a deleted print, of a print made with archiving off, or of every earlier run to each archive with the same name. Archives without linked usage get the estimate from the filament price instead, as they already did when no such record existed (usage recorded before 0.2.1, or with archiving off).
- **An id of 0 no longer slips past the checks when queueing, batching or creating a project** — Adding to the queue with an archive id of `0` next to a library file, creating a batch with an archive or library file id of `0`, and creating a project with parent `0` skipped the check that the archive, file or project exists and saved `0` as its id: a server error on PostgreSQL, a link to nothing on SQLite. `0` now means "none" there, as it already did when editing a project. Creating a batch also checks that its archive or library file exists, and refuses an unknown one.
- **Archiving a virtual-printer upload into a project that does not exist is refused up front** — The project chosen when archiving a pending upload was saved without checking it. On PostgreSQL an unknown project failed with a server error after the file had already been archived; on SQLite the archive was saved with a broken project link. The project is now checked first and an unknown one refused with "Project not found", before anything is archived.
- **A project's bill of materials no longer shows archives from printers outside the user's groups** — A BOM line can be linked to an archive through the API, and the BOM answered with that archive's name whichever printer it came from. A member of a group limited to some printers could read the name of any archive by linking a line to it, and everyone reading the project saw the names of archives from printers they have no access to. A link to an archive that does not exist was saved too (a server error on PostgreSQL). A BOM line now links only to an archive the user can see, and shows a linked archive only to users who can see it.
- **Adding archives or queue jobs to a project keeps to the user's own printers and prints** — Adding archives to a project (**Assign to project**), removing them, and adding queue jobs took any archive or job by its id. A member of a group limited to some printers could link another team's archives and jobs to a project or unlink them, and the reply's count told them which hidden archives exist; any project editor could also relink other users' prints. These now change only the archives and jobs the user could edit directly: on their printers, and only their own unless they may edit everyone's (Operators: their own). Others are skipped like missing ones, and **Assign to project** now reports how many were actually added. An API key with project access still needs no archive or queue access for this, but changes only the archives and jobs of its printers that its owner could change.
- **Editing an archive can no longer move it to a printer outside the user's groups** — A member of a group limited to some printers could move an archive of one of their printers to any other printer through the archive edit, into the history of a team they have no access to, although uploading an archive to such a printer was already refused. Any edit could also link an archive to a printer or project that does not exist (a server error on PostgreSQL, a broken link on SQLite). Such an edit is now refused with "Printer not found" or "Project not found". Moving an archive between the user's own printers, and removing its printer or project, work as before.
- **A smart plug or virtual printer can no longer be linked to printer 0** — Adding or editing a smart plug and adding a virtual printer skipped the "Printer not found" check when the printer id was `0`. On PostgreSQL the save then failed with a server error; on SQLite the plug or virtual printer was saved linked to a printer that does not exist. Such a request is now refused with "Printer not found", as for any other unknown printer.
- **No more firmware-check errors in the log while the internet is down** — Without an internet connection, every firmware check of every printer logged a full error for each Bambu Lab page it tried (measured: 12 errors and 9 warnings for three printers checked three times). The outage is now logged once per Bambu Lab site as a warning, the checks keep retrying quietly, and a line in the log says when the site is reachable again.
- **Bambu Cloud being unreachable is reported as such** — When Bambu Cloud failed (no internet, a blocked or failing connection, an error or an error page such as a Cloudflare challenge), the cloud preset, device and firmware views answered with a server error (500), and pasting an access token answered as if the token were wrong (401). Signing in or entering the email code without a connection to Bambu Cloud also answered 401, as if the password or code were wrong. These now answer 502 (Bambu Cloud unreachable) with the cause, as the preset lookups already did; a pasted token counts as invalid only when Bambu Cloud itself refuses it. An expired session is answered as such (401, sign in again) instead of with a server error.
- **Editing a smart plug can no longer save a plug that cannot be read back** — Adding a plug checks its values: a Tasmota plug needs an IPv4 address, a Home Assistant plug an entity of the right kind, an MQTT plug a topic, a REST plug an ON or OFF URL, and the name must not be empty. Editing one did not, so clearing such a field, switching the type without filling in the new one, or typing a hostname as a Tasmota address saved a plug that the smart plug list, the plug itself and the edit all failed on with a server error until it was fixed in the database. Such an edit is now refused with the same message as when adding a plug, and the plug stays as it was. Switching a plug to Tasmota on a printer that already has a Tasmota plug is refused as well (adding one already was); before, it gave the printer a second one, and adding a plug to that printer then failed with a server error.
- **Creating or importing a project gives it a priority and status the project editor accepts** — Importing a project from a file without a priority gave it the priority `0`: on PostgreSQL the import failed with a server error, on SQLite the project got a priority the project editor itself refuses. Creating a project through the API stored any priority, and importing one any status, the same way (a value longer than 20 characters failed with a server error on PostgreSQL). An imported project now keeps a valid priority (low, normal, high or urgent) and status (active, completed or archived) and gets **normal** and **active** otherwise, from a file and from the JSON import alike. Creating a project with an unknown priority is refused with "Invalid priority", as editing one already was. Such projects could not be edited at all (every save, even of the name alone, was refused as an invalid priority or status); existing ones get **normal** and **active** at the next start. Restoring a backup from such an older SQLite install onto PostgreSQL no longer fails on them either: they get the same values while restoring.
- **The "Password Reset" email template is used again** — Since password resets send a link instead of a new password, the reset email (self-service and admin) was always the built-in one: editing the "Password Reset" template under Notifications changed nothing, and its default text still promised a new password. The reset email is now built from that template, and Bambuddy adds the reset link at the end of it (and as a button); the template itself cannot place or contain the link. `{password}` and `{login_url}` are gone from this template. The default text is updated on upgrade unless you edited it; if you did, reword it for a link instead of a new password.
- **A cost centre is charged for a print whose user was deleted while it ran** — When a user was deleted during their print, the print was never charged: the cost centre's ledger missed its cost, and its budget reservation stayed active for good, holding back that much of the budget. The print is now charged to its cost centre, also to the deleted user's own private one, which their personal prints go through, and its reservation is settled. A queue print is charged under the user who queued it, never under the owner of the archive it reprints. Ledger entries without a user now read "No user" instead of "Deleted user": with login turned off, prints on a cost centre are now charged too and never had a user. Deleting a user together with their items now also releases the budget their queued prints still held; a print of theirs still running is kept until it ends (without a user) and billed to its cost centre like any other. Only a print with no cost centre at all (started while billing was off) has nobody left to charge.
- **Deleting a printer no longer deletes an archive of a print starting at that moment (PostgreSQL)** — If a queue or reprint print started on the printer while it was being deleted, the delete could take the print's archive with it, even with "keep archives" and even when the archive belonged to another printer or a virtual printer queue. The delete now locks the printer while it runs, so such a print start waits and is turned away, and its archive stays as it was; this is logged as a print start for a deleted printer, not as an error, and sends no start notification. An archive that could not be written no longer leaves its copied 3MF behind in the archive folder.
- **A printer deleted while its print was starting no longer gets an archive or tracking** — When a print starts, Bambuddy downloads its 3MF from the printer, which can take minutes. A printer deleted during that download still got an archive afterwards: on SQLite one that showed "printing" forever, since the deleted printer would never report the end, along with a layer timelapse and tracking for it; on PostgreSQL the archive was refused and an error logged. Bambuddy now checks that the printer still exists once the download is done, and again once the archive is written; a queue or reprint print starting just as its printer is deleted is no longer attached to that printer either. Archives the delete was told to keep stay as they are. A queue print dispatched to a printer deleted during its upload no longer records its owner for that printer either.
- **Closing one camera view no longer cuts off the others** — With an external RTSP or USB camera, closing one view of a printer (a Cam Wall tile turning to snapshot, the Camera page, the camera window's refresh) stopped that printer's camera stream for every other open view too, which then froze until it reconnected. Each view now names itself on its stream and its stop: the stop ends that view's own stream (at once, as before, so a USB camera is released when its view closes) and any stream that has stopped sending pictures, and leaves the other views' streams running.
- **Closing or minimizing a camera view now ends its stream** — The camera window on the Printers page left its stream open when minimized (one more open connection per minimize and expand), and both it and the Camera page closed only the first picture they had shown: after a reconnect or a restart, closing them left the current stream running. An open stream keeps the printer's camera connection busy, keeps the chamber light on when "Turn on chamber light for camera" is on for that printer, and made the "stop camera" request on closing do nothing. Every picture a camera view drops now ends its stream. A reconnect also no longer counts one extra failed attempt toward the reconnect limit.
- **Cam Wall tiles no longer freeze on their last frame** — When the server ended a live stream (the camera dropped, or a brief database hiccup during the stream's 30-second access check), browsers report nothing, so a Cam Wall tile kept showing its last frame until the page was reloaded. Live tiles now reconnect their stream every minute while the page is visible, so a camera that comes back shows a picture again within a minute. If the camera stays down, the tile shows "No signal" (a printer's built-in camera keeps its last picture until Bambuddy stops retrying it). A tile that leaves live mode (scrolled away, paused) now closes its stream too, instead of leaving the connection open. The streaming overlay, which already renewed its camera every minute, now closes the old connection first: a browser source left running for hours piled up one open camera connection per minute. A single failed access check no longer ends a stream either: it is checked again after 5 seconds, and only a second failure in a row ends it.
- **SQLite no longer gives a deleted user's, API key's, printer's or archive's number to a new one** — SQLite reuses the highest freed id, so whatever still referred to a deleted user, API key, printer, print archive or camera token could end up referring to the next one created. Earlier fixes cleaned up after each such case; these tables now never reuse an id at all. Existing SQLite databases are converted once at start (the rows, columns and indexes are kept), and ids still referred to (a deleted printer's print history, for example) are skipped. PostgreSQL never reused ids itself; a SQLite backup restored on PostgreSQL (including one restored before this release), or a PostgreSQL backup restored on SQLite, now keeps those ids unused too.
- **Taking away live updates or camera access through a group now ends them** — Only creating a dashboard's live connection or a camera link checked the permission for it. When an admin removed that permission from a group, removed a user from the group that granted it, or turned off an API key's status access, a dashboard already open kept receiving live updates and could reconnect for up to an hour, and an open camera view kept running, its link opened new views and snapshots, and a Cam Wall or Home Assistant camera token kept working until it expired. Those connections and views are now closed and the links refused once the permission is gone; the dashboard falls back to refreshing on its own as it does for users without live updates.
- **An open camera view stops once the viewer may no longer watch** — A live camera stream checked its link once, when it started, and then ran for as long as the tab stayed open. After a password change or reset, removing someone's two-factor authentication, deactivating a user, a backup restore, disabling or expiring an API key, revoking a Cam Wall or overlay token, a group change that takes the printer away, or turning authentication on, a view already open kept showing live video. Streams now check every 30 seconds that whoever opened them may still watch that printer, and end if not. A view that is still allowed keeps running, including past the hour its link is valid for.
- **A tab whose live connection was closed by the server now recovers instead of freezing** — When the server closes the live-update connection because of sign-in (your session ended, authentication was just turned on, or a temporary check failed), the page used to stop updating and stay on screen until reloaded. It now re-checks your sign-in: a tab whose session ended goes to the login page, and one that is still signed in reconnects. While its connection keeps being refused or can't be made it waits longer between attempts, up to five minutes when the server closes an accepted connection again and up to 30 seconds otherwise, instead of retrying every three seconds.
- **Signing a user out everywhere now also closes their open dashboards** — A dashboard's live connection is checked only when it connects. Changing your password, a password reset link, an admin removing someone's two-factor authentication, deactivating a user and restoring a backup all make earlier sign-ins invalid, but a dashboard already open on the account, possibly someone else's, kept receiving live updates until it disconnected, and the link it connected with stayed valid for an hour to connect again. Those live dashboard connections are now closed and their links removed; your own tab reconnects after signing in again. Turning authentication on likewise closes the dashboards opened while it was off, which kept every printer, and disabling an API key, or one expiring, closes the dashboards it opened.
- **A deleted API key's open connections and tokens no longer pass to the next key** — SQLite gives a deleted key's id to the next key created. Live dashboards opened with the key stayed connected, and the camera and WebSocket links it created stayed valid for up to an hour; both were tied to the key by id and took the new key's printers. Deleting a key, or a user with keys, now closes those connections and removes the links, and links of keys deleted before are removed at start.
- **A printer added after a delete no longer takes over the deleted printer's print, notifications, camera and plate references** — SQLite gives a deleted printer's id to the next printer created, and Bambuddy kept much of this under that id until the next restart.
  - **Prints and billing:** the new printer took over the owner of a print still running when the old one was deleted. Its prints were treated as started from Bambuddy, so the kill switch let them run, and its first finished print was credited to that user. A job sent to the old printer that hadn't started yet could do the same for a print with the same file name. A new printer that was already printing when added could also take over the old print's filament tracking, charging its filament to the deleted printer's spools.
  - **Gates and notifications:** the plate-clear prompt could block the queue on the new printer. Pending "bed cooled" and offline notifications fired under its name, and the first print's milestone notifications could be skipped.
  - **First connect:** the steps that run when a printer connects, such as reading its K-profiles, were skipped.
  - **Camera and detection:** a viewer could get the old printer's live picture for a few seconds, a layer timelapse kept recording from the old camera, and Obico failure detection showed the old verdict.
  - **Plate detection:** the old printer's reference pictures of its empty plate stayed, so the new printer showed as calibrated, showed those pictures and compared its plate against them. They are now removed with the printer, and when a printer is added under an id that still has some from an earlier delete.
- **SQLite: deleting archives, library files, queue jobs, batches or projects no longer leaves references to them behind** — SQLite doesn't apply the database's "when this row is deleted, clear or delete what points at it" rules, and it gives the highest freed id to the next row created. So a queue job could end up printing a different archive or library file than the one it was made for, a new project could show a deleted project's files and folders, and archives kept the id of a deleted library file (a new file then inherited them in project progress). Every delete of these now applies the rules the way PostgreSQL does, and every start repairs what earlier deletes left behind: queue jobs of a deleted archive are removed, as deleting an archive already does, while those of a library file that is gone are cancelled or kept as finished, as a library delete does. Deleting a user now also clears their id in the print log, so those runs show under "no user". Deleting a printer together with its archives, and the archive purge, now leave an archive alone while one of its queue jobs is printing (the printer delete answers that it has to wait), as deleting a single archive already did. Archives stored before archive search existed are now added to the search index once; until then, editing such an archive could fail with "database disk image is malformed". PostgreSQL installs aren't affected, apart from the printing check.
- **API: `null` for a field that can't be empty no longer causes a server error** — On most PATCH/PUT routes, `null` for a field leaves it unchanged. About a dozen routes (printers, smart plugs, queue items and bulk edits, archives, filaments, spools, notification providers, GitHub backup, Home Assistant sensors, maintenance, external links) wrote it to the database instead and failed with a server error when the field can't be empty, such as a name or a switch. They now leave it unchanged too, and the rest of the request is applied. `null` for a field that may be empty, such as a printer's location, still clears it. The web interface never sent such values; this affects API clients and scripts.
- **Webhook routes answer a database problem with 503, not 500** — The `/webhook/...` routes checked API keys with their own copy of the check, which missed earlier fixes. A database error while checking the key, a key too long to hash or a damaged stored key came back as a 500. They now use the same check as every other route: 503 when the key can't be checked right now, 401 when it isn't valid. An expired key now reads "Invalid API key" there too, like everywhere else.
- **The MQTT relay publishes what the wiki says it does** — Three topics were missing or wrong. `smart_plugs/energy` was never sent: with the relay connected, each enabled plug's power, today's energy and total energy now go out once a minute (without the relay no plug is read for this, and an MQTT plug that stopped reporting is left out). `smart_plugs/on` and `/off` only came from switching a plug by hand; auto-on, auto-off, schedules, the queue powering a printer on and failure detection switching a plug off now publish them too. `maintenance/alert` always said 0 for the current value and the threshold; it now has the hours (or days) since the item was last done, its interval and a `unit` field.
- **PostgreSQL databases from older versions get the links a new install has** — A database created before v0.2.4.1 (or before v1.2.5.2 for the last one) was missing three links: from a print log entry to its archive and to the user who started it, and from an archive to the library file it was printed from. Deleting an archive, a user or a library file left their ID behind instead of clearing it, so such entries didn't show up under "no user", for example. The links are added on the next start, and IDs of things already deleted are cleared. A print log entry without an archive also stays that way now: every start used to attach it to the newest archive with the same name on the same printer, which could be someone else's. 51 columns, mostly settings flags, also accepted an empty value there or had a default only those databases had. They now match a new install, and an empty value gets the column's default, with two exceptions so nothing gains access: an empty API key permission becomes "off", and an OIDC provider without an email claim, which so far linked no accounts, gets auto-linking turned off instead of starting to link by email. Apart from that, SQLite installs are unchanged.
- **Spoolman: colour, material and cost from the spool weren't applied on older PostgreSQL installs** — On a PostgreSQL database created before v0.2.4.8, the start snapshot of the AMS levels was stored as text instead of JSON and read back as text. Reporting usage to Spoolman then failed after charging the spools from the 3MF, with "Spoolman usage reporting failed" in the log. Prints without a 3MF charged nothing, and no archive got the colour, material and cost of its Spoolman spools. The column is converted on the next start. Two number columns also only had single precision on PostgreSQL databases older than them and are widened, keeping the values as entered: a spool's "Reset usage" baseline (databases created before v0.2.4.2) and a REST smart plug's energy total multiplier (before v1.2.5). SQLite installs aren't affected.
- **Every install now gets the dependency versions that were tested** — Bambuddy's Python dependencies only had minimum versions, so each Docker build, install and update took whatever was newest that day: a fresh install could run library versions nobody had tested Bambuddy with (SQLAlchemy 2.1 arrived that way). They are now pinned in `requirements.lock`, which Docker, the installers, the update scripts and the tests all use, and newer versions are taken on deliberately, after testing. Nothing changes for an install today: the pins are the versions a fresh install gets now. A native install moves to the pinned versions with the update after the one that brings this change, since an update still runs the previous version of the update script.
- **Native installs need Python 3.11 or newer** — Since v0.2.4.8 Bambuddy hasn't started on Python 3.10, while the installer, README and wiki still said 3.10 was enough. The requirement now says 3.11. The installer uses the system's `python3` when it is new enough and otherwise looks for a newer Python next to it: on Ubuntu 22.04, whose `python3` is 3.10, it installs and uses the `python3.11` package. An environment left from an older Python is rebuilt. The update scripts check the install's Python first and, if it is too old, stop before changing anything and link to the steps for moving it to 3.11. Docker and the Windows installer ship Python 3.13 and are not affected. Wiki updated.
- **The webhook endpoints listed in Settings didn't exist** — **Settings → API Keys → Webhook Endpoints** listed endpoints for the status of all printers, pausing and resuming that Bambuddy doesn't have, and two others under the wrong path. It now lists the real ones: add to the queue, start the next queued job, stop, cancel, printer status and queue status. Wiki updated.
- **A valid API key could be refused as invalid during a brief database problem** — When checking an API key hit a database error (a busy database, or saving the key's last-used time while it was locked), the request was answered "Invalid API key", so integrations such as Home Assistant or scripts were told their key was wrong. It now answers "Authentication service temporarily unavailable" (503), which a client can retry, and the error is logged. A wrong or expired key is refused as before.
- **Errors were reported as "Authentication service temporarily unavailable" with login switched off** — Without authentication, any unexpected error in Bambuddy answered 503 "Authentication service temporarily unavailable", and the log blamed the authentication check, which sent troubleshooting the wrong way. Such errors are now reported as the internal error they are (500), and the error with its details now lands in `bambuddy.log` (and so in support packages), whether login is on or off. The protection that refuses requests when Bambuddy can't tell whether login is on stays as it was.
  - **With login on, a brief database hiccup no longer signs you out:** while checking a sign-in, a database error answered "Invalid token", and the web interface took that as final, signed the user out and forgot the sign-in. It now answers "Authentication service temporarily unavailable", which the interface retries, and the error is logged.
- **A print started outside Bambuddy could be reported to the owner of the previous queue job** — On a printer with **Auto-archive completed prints** switched off (in the printer's settings), a print Bambuddy didn't start (for example one started on the printer itself) has no archive. When it finished, failed or was stopped, the notification looked for any queue job this printer had finished in the last five minutes and treated the print as that job: its owner got the "your print is done" email for a print that wasn't theirs. It now uses only the queue job the print itself belongs to, so such a print isn't sent to anyone's personal email.
  - **A queue job whose archive couldn't be found** at the end, when it finishes or fails, is still reported to its owner, and its duration (`{duration}`) is how long it actually ran instead of "Unknown". A job stopped from the queue page in that situation no longer sends its owner the "stopped" email.
- **Smart plug power alerts were never sent** — A plug's **Power Alerts** (alert if the power is above or below a value) never reached any notification provider, and each time one was due, that request for the plug's status on the printer card failed. They also were only checked while someone had a printer page open.
  - **Now checked in the background,** about once a minute, whether or not Bambuddy is open.
  - **One alert per crossing:** you're told when the power leaves the range, and again only after it was back inside it, so a printer idling below a low value is reported once rather than every five minutes. The low value only counts while the plug reports itself switched on, so turning a printer off raises no alert (a plug that can't report its switch state gets no low alerts). Alerts go out as the **Printer Error** event ("Printer Error: Power High" / "Power Low"). Wiki updated.
- **A project's timeline stayed empty while one of its jobs was queued or printing** — The **Timeline** on a project's page failed to load as soon as the project had a pending or printing job in the queue, so it showed no events at all, not even the finished prints. It loads again, and queued and running jobs show under their print name (or file name; a job for any of several printer models under its first file).
- **Stopping or cancelling a print through the API failed with an error** — `POST /api/v1/webhook/printer/{id}/cancel` answered with an error and left the print running. `POST /api/v1/webhook/printer/{id}/stop` stopped the print but still answered with an error. This affected Home Assistant automations and scripts that use an API key; the Stop button in Bambuddy was not affected.
  - **Now both stop the print and answer normally.** If the printer drops off before the command can be sent, they answer "Printer not connected" (503).
  - **A print stopped this way now counts as stopped, not failed,** as with the Stop button: the "print stopped" notification goes out instead of "print failed", and the print is no longer mislabelled with a printer error such as a layer shift.
  - **`…/stop` now stops a paused print too,** as `…/cancel` and the Stop button on the printer card do; it used to answer that no print was in progress.
  - **"Stop Printing" in the HMS error dialog** now also counts as stopped rather than failed.
- **Starting the next plate of a Send All deleted the previous plate's timelapse (#3275, reported by @dovmesiz)** — All plates sent together with **Send All** share one archive. When a print starts on an archive that already has a timelapse, Bambuddy clears it so the new run gets its own video and completion photo. It also deleted the old video file, so starting plate 2 deleted plate 1's. With **delete from printer after archiving** on, that was the only copy. The video is now deleted only when the same plate prints again. Another plate's video, or one attached by hand or before this release, stays in the archive folder and is removed with the archive. The card still shows the latest plate's video. An external-camera timelapse no longer overwrites a kept video of the same name.
  - **A queued print still running 2 hours after it was sent lost what Bambuddy stored for it at dispatch:** its plate, AMS mapping and cost centre, which the completion uses (for example for the per-plate totals in the notification). A clean-up of unused print registrations removed them mid-print. They are now kept until the print completes.
- **A PP spool without a slicer preset was sent to the AMS slot with no filament ID (#3273, reported by @sgiffhorn)** — When a spool has no preset of its own, Bambuddy fills in Bambu's generic preset for its material. The table used for spool assignment had no entry for PP, PE, PCTG, PLA Silk or PLA High Speed, so those slots got an empty filament ID, while **Configure AMS Slot** used a separate, longer table. The backend now has one table with all five, matching the one the frontend already used. A slot already set to Generic PLA Silk or PLA High Speed still keeps it when a PLA spool without a preset is assigned, as before.
  - **PVA, HIPS and Bambu support filaments got the wrong setting ID:** their filament IDs start with `GFS` (Generic PVA is `GFS99`), which Bambuddy took for a setting ID. It sent `GFS99` instead of `GFSS99` and read it back as `GF99`.
- **Every start filled the PostgreSQL log with about 320 errors** — On PostgreSQL, the startup migrations re-ran every column, index and constraint they had already added, and the database logged each of those as an `ERROR` with its statement, about 640 lines per start, before Bambuddy quietly skipped it. Nothing was wrong, but the noise buried real errors and alarmed anyone reading the log, on the appliance as much as on Docker with PostgreSQL. On PostgreSQL these statements now ask the database to skip what is already there (`IF NOT EXISTS`, or a check of the catalog for constraints and renames), so a normal start logs no errors. Columns, renames and constraints that are actually missing are still added, and SQLite is unchanged. PostgreSQL 13 or newer is required, and the wiki now says so: Bambuddy has never started on PostgreSQL 12 or older, whose startup migrations fail on a column type those versions reject.
- **A large timelapse could not be attached when it took more than 5 minutes to download (#3272, reported by @dovmesiz)** — Scanning for a timelapse, picking one by hand and the automatic attach after a print all gave the download a flat 300 seconds. A 75 MB video that took 358 seconds over a healthy P1S link failed with "Failed to download timelapse", and each retry started the file again from scratch. The time allowed now follows the file's size, so a slow transfer completes; a link that stops sending still fails after the FTP timeout as before.
- **A printing queue job showed the slot AMS Filament Backup had switched away from as empty** — When a spool ran out mid-print and the printer carried on from the backup spool, the job's card in the queue still named the original slot, now marked **Empty**, as if the print had a problem. The card now shows the backup spool the printer is using. It follows the printer's own record of the trays the print has drawn from, including a backup that ran out in turn. A switch between two slots the job uses is a normal colour change and is not taken for a backup. Queued jobs still warn about an empty slot as before.
- **Slice dialog hid renamed printer profiles while "Only printers that are online" was on (#3172, reported by @gregspatrick)** — The filter read the printer model from the profile's name, so a copy saved as `Bambu Lab P1S 0.4 nozzle - Copy` read as an unknown model and was hidden even with a P1S online, until **Show all** was picked. It now reads the model from the profile the copy was saved from, as the loaded-spools filter already did.
- **Printer cards never showed the last print, nor the Good / Reject prompt for it** — Each card asked for its printer's archives with the arguments in the wrong order, so it requested none and always got an empty list. The **Last:** line on an idle card and the outcome prompt from #1898 never appeared there.
  - **One request for every card:** the cards now share a single request that returns the archive each printer printed last (a reprint of an older archive counts), instead of one per card. On a farm with 59 printers that was 59 requests on every page load and after every finished print, each scanning the whole archive table for duplicates.
- **The File Manager and Archives page loaded every thumbnail at once** — With a few hundred files every thumbnail was requested on page load, and the queue of requests slowed down everything else on the server for several seconds. Thumbnails now load as they scroll into view.
- **Statistics counted a multi-material print written from spools as one material (#3262, reported by @ojimpo)** — A print's materials are stored comma-joined, as `PLA, PLA-S` from the sliced file but as `PLA Basic,PLA` once they are taken from the spools that fed it. The Statistics page split on comma plus space only, so those prints showed as one `PLA Basic,PLA` row in the material weight, print count, time and success-rate charts, and the Archives material filter offered the joined string as a material of its own and missed those prints when filtering by `PLA`. Both now split on the comma alone, as the statistics API already did, so existing archives are counted under each of their materials.
- **A running print's cost used the default rate instead of its spools, then changed without notice at completion (#3261, reported by @ojimpo)** — The archive was priced at creation from the Filament catalogue or **Default Filament Cost**, and the spools that fed the print only priced it once it finished, in both Spoolman mode and the built-in inventory. Anyone noting the cost while a long print ran recorded a placeholder. A print is now priced from its spools when it starts, from the sliced file's per-slot estimate and the spool in each mapped tray, with the same default-rate cover for grams no spool prices; a reprint still keeps its first run's cost. The archive card marks a running print's cost with `~` and a tooltip, since the final figure comes from what was actually used. A print whose slots can't be matched to trays at the start keeps the placeholder until it finishes.
- **AMS Filament Backup showed "?" on the P1S, P1P, A1 and A1 Mini (#3259, reported by @HopNotch)** — These printers never send the `cfg` field Bambuddy read the setting from; they carry it in `home_flag` bit 10, where Bambu Studio reads it for every printer. Bambuddy now falls back to that bit, so the badge shows the printer's real setting and the prefer-lowest-remaining gate follows it. Switching the setting in the slicer now shows up without a Force Refresh. Before 1.2.5.6 the badge seemed to work on these printers only because it read Bambuddy's own print command echoed back, which always said off (#3040).
- **Slicing failed with a printer preset saved under a name of its own (#3250, reported by @bobobo1618)** — A printer preset copied from a stock one and renamed, such as "Bambu Lab H2D 0.4 nozzle - Apply Skew Calibration", failed every slice with "The selected printer is not compatible with the process preset in the 3mf", even with a stock process the stock printer slices fine.
  - **Why:** the slicer checks a process against the stock preset a printer preset was saved from. The slicer sidecar handed it the renamed preset as a stock preset in its own right, and no process lists that name. It now names the stock preset the printer was saved from, while still slicing with the renamed preset's own settings, start G-code included. A process or filament preset that lists the renamed printer itself keeps fitting it, as it does in the slicer. Needs the updated slicer sidecar image (OrcaSlicer and Bambu Studio).
  - **The Slice dialog** read the printer model out of the preset's name, which a name of your own may not contain, so it misjudged which process and filament presets fit. It now also checks against the stock preset the printer was saved from, for imported and OrcaSlicer Cloud printer presets.
- **A print started from the printer's screen took about six seconds longer to archive (#3009, reported by @bdwilson)** — A job started on the printer's own screen reports its file's full name, extension included (`Part.3mf`), where a job Bambuddy sends reports the bare name. Bambuddy added the extensions to it anyway and asked the printer for `Part.3mf.gcode.3mf` and `Part.3mf.3mf` first, six connections that could not succeed, before trying the real file. The check that reattaches a running print after a Bambuddy restart compared against the same doubled name, so it could not find such a print. When the printer reports the same full name as both the job and its file, that name is now taken as the file itself: it is the only name tried, and the restart check also matches that exact file. Prints Bambuddy dispatches are looked up as before.
- **A queue job stayed "printing" for five minutes when its file name ended in a space (#3241, reported by @Thomansky)** — A file saved as `Part .gcode.3mf` is sent to the printer as `Part `, and the printer reports it back as `Part_`, turning that space into an underscore like every other. Bambuddy dropped the space from its own side before comparing, so the names differed, the finish was ignored as belonging to another print, and the job showed "printing" until the stale-job cleanup closed it about five minutes later, holding up the printer's next job. The finish photo's plate restore skipped these prints for the same reason. A space at the start of the name had the same effect. Both are now matched.
- **The finish photo never raised the plate back into view (#3240, reported by @Thomansky)** — Since 1.2.5.2, Bambuddy is meant to raise the build plate back to just above the finished print before the finish photo, then lower it again, because the printer's end G-code drops the plate about 100 mm. It never did, on any printer: the lookup for the print's height failed every time and logged nothing above debug level. It read the archived file from a setting that does not exist, and it matched the archive by exact name, while the printer reports a name with its spaces turned into underscores. Both are fixed, so the plate now really moves after a print when **Restore plate for finish photo** is on, which it is by default. Turn it off under **Settings** > **General** to keep the photo where the plate stops. Because the plate now really moves, the print's height is taken only from the archive Bambuddy linked to that print when it started, and from the plate that was sent, never from another archive that merely has the same name: every plate of a multi-plate file shares one name, and support bundles showed the old lookup picking another plate's archive, stopped only by its layer count. That archive must also match the print's name exactly, never part of it or a shortened version; its layer count must agree with the printer's; and the plate stays put when another job is queued for the printer or the print was not linked to an archive.
- **An "Any model" job was held for too little filament on one printer while another idle printer of that model had plenty (#3137, reported by @RambachTJ)** — The queue gave a job queued for **Any H2D Pro** (or any model) to the first idle printer with the right filament type, and only then checked whether its spools held enough. When they did not, the job waited on that printer for a manual start, even though another idle printer of the same model could run it; the only way out was to move it by hand. The queue now passes over a printer that would run short and gives the job to one that has enough. If every idle printer would run short, the job still waits on the first, where **Print Anyway** works as before, and moves by itself once another idle printer of its model has enough filament, on record in Inventory or Spoolman.
- **Shutting Bambuddy down logged an error with a traceback when nothing was wrong (#3243, reported by @Thomansky)** — Stopping Bambuddy cancels the printer updates still waiting to be handled, and each cancelled one was logged as `ERROR ... Exception in scheduled callback` with a traceback, as the last line before the restart. In a log or a support bundle it looked like a crash. A cancelled update now ends quietly; one that actually fails is still logged as an error.
- **H2D, H2D Pro and H2C with several AMS on one extruder marked the wrong tray as loaded on every filament change (#3242, reported by @Thomansky)** — These printers report the loading tray as a slot number (0-3) without saying which AMS it is in, and the report that says which AMS is read a moment later. In that gap Bambuddy assumed AMS 0: during a print feeding from AMS 2 slot 1, AMS 0 slot 1 showed as loaded for about a second, and that tray went into the list of tray changes that splits a print's filament between spools. Support packages show this on every filament change.
  - **Now:** while a print runs, the slot is matched against the trays the print uses, taken from the printer's own mapping. If that doesn't settle it, as in a multi-colour print with the same slot in two AMS, the tray already loaded stays marked until the printer says which one is feeding.
  - **Usage:** no case was found where a spool was actually charged for the wrong tray, because the wrong tray was always replaced within the same layer. It no longer gets into the list at all.
  - **Idle printers:** the printer keeps reporting the last print's mapping after it ends, so it is used only during a print.
- **A job moved to a location or model could print from an empty external spool on a printer that has the filament in its AMS (#3239, reported by @hyyz17200)** — A job keeps the AMS mapping of the printer it was made for. When a job made for a printer without an AMS, which feeds from the external spool, was moved to a location and picked by a printer with an AMS, it still told that printer to use its external spool, and the print stopped at once with "External filament is missing". The check added for #2799 didn't catch it, because it read an external spool the printer reports as empty as "no information". Now, when the printer reports its external spool empty and its AMS holds the filament the job needs, in the same colour, the mapping is worked out again for that printer. A printer without an AMS keeps using its external spool as before, also when the spool's filament was never set, and with only another colour in the AMS the printer still asks for the spool rather than print in that colour.
- **A job moved to a location or model could print in the wrong colour (#3239, reported by @hyyz17200)** — The fix above only covered the external spool. A job still kept the AMS trays of the printer it was made for, so a job for black PETG in tray 3 of one printer, moved to a location and picked by a printer with blue PETG in tray 3, printed in blue: the tray existed and held the right material, so nothing stopped it. A job that Bambuddy places on a printer by model or location now gets its trays matched on that printer, by material and colour, and is held for a spool when nothing fits. Moving a job from a printer to a model or location also clears its tray choice and any "Print Anyway" given for that printer. A job sent to one printer keeps the trays picked for it. A printer without an AMS whose external spool has no filament set now prints every filament from that spool; such a job used to go out without a mapping and stop with 0700_8012 "Failed to get AMS mapping table".
- **The SD-card cleanup could delete a file the printer was printing (#3009, reported by @bdwilson)** — If a print finished while Bambuddy was stopped and you then reprinted the same file from the printer's screen, Bambuddy closed the old print when it came back and deleted its file from the SD card, even though the printer was printing that file right then. The cleanup now leaves a file alone while the printer is printing it.
- **Permissions taken away from a group came back after a restart (#3238, reported by @Minebuddy)** — Turning off **View MakerWorld** and **Import MakerWorld** for a group and restarting Bambuddy turned them back on. Several permissions added in past releases were given to every matching group on each start, not just once on the upgrade that introduced them: MakerWorld, **Clear plate**, stock forecasting and slicer pipelines. Each is now given once, and a permission you remove stays removed. Updating doesn't re-enable anything you have already turned off. The built-in Administrators, Operators and Viewers groups, whose permissions can't be edited, are still kept complete on each start.
- **A virtual printer with Save AMS mapping lost the slicer's external-spool pick (#3237, reported by @erabti)** — The slicer marks a filament fed from the external spool as -1 in its slot list, the same as a filament with no slot, and says which spool it is in a second list. Bambuddy saved only the first list, so the queued print sent that filament as unassigned. On an H2C the printer then stopped before the first layer with 0700-8012, "Failed to get AMS mapping table". The saved mapping now keeps the external spool, left or right on dual-nozzle printers, for the queued print and for reprints from the archive.
- **A smart plug that reports energy in watt-seconds could not be set up (reported by @CLKRUN in #1251)** — A myStrom Switch reports energy in watt-seconds, and converting that to kWh needs a multiplier of about 0.000000278. The multiplier fields refused anything below 0.0001, so saving the plug failed. Any multiplier above zero is now accepted, for MQTT and REST plugs alike.
- **The Statistics energy total stayed at 0 for Shelly and other REST plugs with only a lifetime counter (#3232, reported and contributed by @rojosinalma in #3233)** — With **Total consumption** tracking and no date filter, the Statistics page adds up each plug's lifetime counter, but for REST plugs it added the counter for today. Since #2539, a Shelly is set up with only **Lifetime Energy JSON Path**, as it has no counter for today, so its plug added nothing and the energy total and cost showed 0, while any date range showed the right figure. REST plugs now add their lifetime counter, the same as Tasmota and Home Assistant plugs. A plug with only a counter for today still adds that one.
- **Running out of file descriptors could corrupt a SQLite database (#2883, reported and contributed by @M2ABRAMSTANK in #2884)** — Docker, the systemd service and most native installs start Bambuddy with a limit of 1024 open files. Once a busy instance used them all, every new database connection failed with "disk I/O error"; on the reporter's single-printer install that went on for 44 hours and ended with "database disk image is malformed" and a login outage. Part of the reason is how SQLite works in WAL mode: a database connection that closes keeps its file open until the last connection closes, so the database's share of open files stays at the most connections the pool ever reached. Bambuddy now raises its own open-file limit to the maximum the system allows when it starts, on every install, and logs what it set. The SQLite connection pool is smaller (10 + 90 instead of 20 + 200), which halves its share. A large printer farm still on SQLite that runs out of connections can raise `DB_MAX_OVERFLOW`, but is better served by PostgreSQL. The support bundle now counts open files by kind (database, sockets, pipes and so on) against the limit, so the next report shows what is holding them. Covered by backend tests.
- **One model queued to several printers could print in the wrong filament (#2799, reported and contributed by @grolmus in #2803)** — An AMS mapping is a list of one printer's own tray numbers, and Bambuddy stamped the mapping it worked out for the first selected printer onto every other printer in the same dispatch. Where those printers hold the same spools in a different slot order the tray numbers still resolve, so nothing looks wrong, and each copy prints from whatever sits in that tray — in the reported case ASA where the 3MF requires PETG. An explicit mapping also bypasses the printer's own filament-type check, so nothing further down catches it. Every selected printer is now mapped against its own AMS, and a mapping already stored on a queue item is checked against the printer about to run it and recomputed when it does not fit, which covers a spool moved between queueing and dispatch as well. A tray of the right type in the wrong colour is still accepted, as it always was when nothing better is loaded. A slot you put on a tray of another material yourself in the print dialog is kept as you chose it.
- **A job whose filament is not loaded waits instead of printing (#2799, reported and contributed by @grolmus in #2803)** — When a slot the plate prints cannot be matched to a tray on the printer it is about to go to, the job is held for a manual start and the queue row says which filament it needs, the same way a job short of filament already waits. This also catches a job that matched nothing at all: it used to be sent anyway and refused by the printer after the whole file had been uploaded, with `0700_8012 Failed to get AMS mapping table` and no explanation on screen. A job queued to a model rather than a named printer gives its printer back when it is held, so pressing start lets the queue choose among all printers of that model again instead of tying the job to the one that could not run it. That choice still goes by filament type only, so when the filament is on the wrong nozzle or the AMS changed after the printer was picked, it can pick the same printer and hold the job there again. A held job waits for someone to press start even once the right spool is loaded, as the filament-shortage hold already does. Start then finds the spool and the job prints, keeping any trays already chosen for its other slots. If the filament is still not loaded, Start says which one is missing and offers Print Anyway, which sends the job the way it went out before this change. The filament named on the queue row and in the notification is in English whatever the interface language.
- **SpoolBuddy recognises a Bambu Lab spool from either of its two tags, and finds the spool the AMS already created (#984, block 9 read from @Keybored02's #1200, measured by @Thomansky and @Sawtaytoes)** — A Bambu Lab spool has a tag on each side. The two have different tag UIDs, but share one spool ID, the same one the AMS reports. SpoolBuddy read that ID from the wrong part of the tag: the bytes it used hold the filament type, so every "PLA Matte" spool sent the same "ID". The kiosk then didn't save it, so a spool was only known by the UID of the tag that was scanned. Scanning the other side offered to add the spool again, and a spool added on the kiosk was not matched when it went into the AMS, and the other way round.
  - The SpoolBuddy daemon now reads the real spool ID (block 9). **Update the SpoolBuddy daemon** to get the fix: on the kiosk, Settings → Updates.
  - Add to Inventory and Assign Spool on the kiosk save the spool ID with the tag, also when the spool was lifted off the reader while the dialog was open. In Spoolman mode the spool ID is stored as the spool's tag, as the AMS sync already does.
  - Bambuddy ignores a spool ID that is not a real one, so a SpoolBuddy that has not been updated yet keeps matching by tag UID as before and never saves the filament type as an ID.
  - Spools added on the kiosk before this fix get the spool ID the next time the tag they were added with is scanned. After that, the other tag and the AMS find them too. This only happens when the scanned tag UID matches the spool's exactly, the spool has no spool ID yet, and no other spool carries that ID. A near match on the tag UID, which a different reader can produce, never writes anything. In Spoolman mode the spool ID replaces the tag UID as the spool's tag.
- **In Spoolman mode, lifting a spool off SpoolBuddy while Assign Spool or Add to Inventory was open lost its tag** — Both took the tag from the reader, which forgets it as soon as the spool is lifted, instead of from the card that stays on screen. Assign Spool then only reported that linking failed, and Add to Inventory created the spool without a tag and showed an error. Both now use the tag shown on the card, as local inventory already did. Bambu Lab spools were covered by the #984 fix above; this fixes it for every other tag.
- **File names could vanish from the File Manager's list view (#3105, reported and contributed by @akshayy29 in #3119)** — With authentication on, the list has an extra Uploaded By column. When the folder sidebar left less room than the fixed columns needed, the Name column shrank to nothing, and the Uploaded By value sat right next to the thumbnail. The Name column now keeps at least 240px and the Tags column at least 96px. When there isn't room for both, the list scrolls sideways (it already could) instead of hiding them.
- **A printer fault that kept coming and going was notified every time it came back (#3226, reported by @sgiffhorn)** — Bambuddy remembered which faults it had already notified as one list per printer, replaced on every status update, so a fault was forgotten the moment one update arrived without it. A 30-second grace period was meant to cover that, but only applied when the printer reported no faults at all, which never happens while it holds a notice such as the lubrication reminder. An H2D whose nozzle camera lens fault switched on and off beside two lubrication notices sent the same notification 9 times in 22 minutes. Each fault is now remembered on its own and notified again only after it has been gone for 10 minutes. So that a fault you fixed is still reported if it happens again soon, a fault seen before the print is resumed, started or finished is forgotten as soon as it is gone, without the wait; a filament runout fixed before resuming is notified again if it recurs a few minutes later. Covered by unit tests.
- **The Printer Locations page had no way back to the Printers page** — the page is opened from the Printers page and is not in the sidebar, so the browser's back button was the only way out. It now has a "Back to Printers" link above the title.
- **Inventory missed filament when two filaments of a print came from the same spool (#3230, reported by @Andrewdlec)** — once a print had charged a tray, any further filament from that tray was skipped. Mapping two of a project's filaments to one spool, which is common when a multi-colour model is printed in fewer colours, deducted only the first: the reporter's H2C charged 1.05 g of a 3.18 g print. A single-filament print that switched to another tray and back lost the last part the same way. Each filament is now charged on its own, with its own usage-history entry. Covered by unit tests.

### Security
- **Bumped `dompurify` to 3.4.17, `zod` to 4.6.7 and Vitest to 4.1.12 for npm audit advisories** — DOMPurify 3.4.17 fixes three bypasses: `SAFE_FOR_TEMPLATES` with shadow roots, `IN_PLACE` with hooks that remove nodes, and the SMIL `attributeName` guard in XHTML mode. Bambuddy sanitizes project notes, project pages and MakerWorld descriptions with a plain `sanitize()` call and none of those options or hooks, so it was not exposed; the bump keeps the one runtime dependency of the three clean, and its floor in `frontend/package.json` moves to `^3.4.17`. zod 4.6.6 checks array, set and map size limits before parsing their elements, so an oversized collection can no longer exhaust memory; it is a development-only dependency, pulled in by `eslint-plugin-react-hooks` and `knip`, and is not in the shipped image. Vitest 4.1.12 hardens `@vitest/mocker`'s manual and redirect mocks; the test suite uses neither `__mocks__` folders nor redirect mocks, and the mocker runs only during tests. Vitest and `@vitest/coverage-v8` pin each other exactly, so `npm audit fix` alone left them on 4.1.11; both floors move to `^4.1.12`, and Vitest's own `chai`, `std-env` and `tinyrainbow` move with it. Verified with eslint, knip, typecheck, the production build and its Safari 16 baseline check, i18n parity and the full frontend suite (5207 tests across 394 files). `npm audit` reports zero vulnerabilities.
- **Bumped the development tools' `virtualenv` to 21.14.9, `filelock` to 4.2.1 and `setuptools` to 84.1.0 for pip-audit advisories** — All three are development-only and none is in the shipped image or `requirements.lock`: `virtualenv` and `filelock` arrive through `pre-commit`, `setuptools` through `bandit[sarif]` and `pbr`. `requirements-dev.txt` now sets them as minimums, the way it already does for `msgpack`, so a development install audits clean. `filelock` 4 is a new major version; its breaking change is the on-disk format of `SoftReadWriteLock`, which `virtualenv` does not use, and `virtualenv` 21.14.9 accepts it. Verified with the pre-commit hooks, a bandit SARIF run, ruff, typecheck and the full backend suite. `pip-audit` reports zero vulnerabilities.
- **Bumped `pyasn1` to 0.6.5 and `minimatch` to 11.0.4 for pip-audit and npm audit advisories** — pyasn1 0.6.5 fixes four decoder issues where crafted BER input could take quadratic time or memory (binary REAL mantissas, constructed BIT STRING and OCTET STRING fragments, and schemaless tag tracking); it ships in the image as a dependency of `ldap3`, which uses it for LDAP sign-in, so `requirements.txt` now sets `pyasn1>=0.6.5` as a minimum and both locks move to 0.6.5. minimatch 11.0.1 fixes a denial of service where a crafted glob made pattern preprocessing grow without bound; it is a development-only dependency of `eslint` and `typescript-eslint` and is not in the shipped image. There is no 10.x fix, so the `overrides` pin in `frontend/package.json` moves from `^10.2.1` to `^11.0.4`. Version 11 removes `makeRe()`, `.regexp` and the `AST` class, none of which eslint or typescript-eslint call; they only use `match()`, `minimatch()` and `.pattern`, and eslint still lints the same 809 files with no findings. Verified with the LDAP tests, ruff, typecheck, the full backend suite on SQLite and Postgres, eslint, knip, the production build and the full frontend suite. `pip-audit` and `npm audit` report zero vulnerabilities.

## [1.2.5.7] - 2026-10-02

### Added
- **A Column view in the File Manager (#3020, requested and contributed by @Thomansky in #3190)** — Next to Grid and List there is now **Column view**, as in the macOS Finder: one column per folder level, each listing that level's subfolders and then its own files, with the selected folder's files in the pane on the right. It shows where you are in the folder tree and lets you walk up and down it without going back to the sidebar. File rows carry the same actions as the list view (Print, Slice, Preview, Download, Details, Rename, Delete and the rest), and folder rows the same ⋮ menu as the sidebar. It works from the keyboard too: ↑/↓ move within a column, → or Enter go down a level, ← goes up, Enter opens a file's preview, Space ticks it, and the context-menu key or Shift+F10 moves into the row's actions. A file ticked in any column counts for the toolbar's Print, Preview, Combine, Move and Delete. With a search or tag filter active the columns step aside and the results take the full width, since they span every folder. The choice is remembered like Grid and List. Changing folders now clears the selection in every view, so Move and Delete can't act on files that are no longer on screen. The sidebar's folder ⋮ menu now closes when you click it again.
- **Announcements from the Bambuddy maintainers, inside Bambuddy** — Security fixes, breaking changes, new releases and calls for testers now reach the people running Bambuddy where they already look, instead of only on GitHub and Discord. An **Announcements** entry sits at the bottom of the sidebar above the System icon for everyone who may see them, with a count of unread messages; it opens a list, and **important** and **critical** messages also show a banner until dismissed. Messages past their expiry stay readable under **Earlier** for a year (up to 50); withdrawn ones disappear everywhere. Read state is kept per user on the server. Bambuddy fetches one file, `feed.json` from the public `maziggy/bambuddy-notifications` repo on GitHub, at startup and every 6 hours: no Bambuddy server is contacted and nothing about the install is sent, and whether a message applies (version range, beta channel, install type) is decided locally. The file is signed with Ed25519 against a key built into Bambuddy, so a copy of the repo or anyone in between can't make it show a message, and an older file is refused so a withdrawn message can't be brought back. Messages are plain text, and links go only to github.com and bambuddy.cool. Shown to administrators; **Settings → General → Updates** can show them to every user, or turn them off entirely, in which case nothing is fetched.
- **Camera snapshots reach more notifications and more providers, with an Attach Photo switch per provider (#3089, requested and contributed by @bbbenji in #3199)** — Plate Not Empty now carries a photo of the plate, taken before the chamber light is switched back off, and AI Failure Detection carries the frame the model flagged. Home Assistant (with a notify service set), Bark and Slack-format webhooks get photos too: they fetch the image themselves, so Bambuddy saves it under a random name and sends a link that opens only that one photo and stops working after 3 days. This needs **External URL** set in **Settings → Network**. Each provider has an **Attach Photo** toggle, on by default so nothing changes for existing setups, and **Test** sends a sample image when it is on. The print emails sent to the user who queued a job can show the finish photo inline when the template contains `{finish_photo_url}`. The template editor shows which events can carry a photo, and lists the variables for AI Failure Detection, Plate Not Empty, Plate Clear Required and First Layer Complete. The chamber light switched on for the plate check is now always switched back off, even when the check fails.
- **Combine several STLs, or several copies of one, onto one plate (#2999, requested by @Markus98, contributed by @adman234 in #3162)** — The slicer sidecar slices one model at a time, so putting separate STLs on one plate needed a desktop slicer to build the 3MF first. Select one or more STLs in the File Manager and click **Combine to 3MF**, set how many copies of each you want, and Bambuddy saves a new 3MF with every object on one plate, with a preview image. Tick **Open the slicer when done** to go straight to the Slice dialog with auto-arrange already on. The source STLs are left untouched. A plate holds at most 100 objects, and the selected STLs can be at most 300 MB and 5 million triangles in total; each STL is stored once however many copies you place.
- **The API-key printer status carries layers, the job id, HMS faults and the serial (#2919, requested by @simplytoast1)** — `GET /api/v1/webhook/printer/{id}/status`, the compact status route polled by add-ons such as notify-bambuddy for iOS Live Activities, returned only state, progress and time remaining. It now also returns `layer_num` and `total_layers`, the printer's `subtask_id` for the running job (a new value means a new print, even between two polls; `null` when Bambu gives the job no id), the live `hms_errors` in the same shape as the printer status route (so a filament runout reads differently from a manual pause), and the printer's `serial_number`. `remaining_time` stays in minutes for existing clients; the new `remaining_seconds` gives the same estimate in seconds, the unit notifications use. Nothing existing changed, and the route still needs **Read Status** and honours a key's printer limits.
- **Choose what goes on a spool label, see it before printing, and save labels as PNG (#2981, requested by @apizz)** — Spool labels always carried the same lines, and you only saw the result once the PDF opened. The label picker now has a checkbox for each line: brand, material and subtype, colour code, name, storage location, material number, nozzle temperature, net weight, note, date added, QR code and spool ID. Material number, temperature, weight, note and date were never printed before, and leaving out the QR code gives the text its space. A preview beside the options shows the first selected spool's label as it will print, and updates as you change them. Lines that don't fit on the chosen size are left out rather than printed over the spool ID. Labels can now also be saved as PNG at 203, 300 or 600 dpi for label printer software that takes images, such as Brother P-touch Editor: one label comes as a PNG, several as a ZIP. The picker remembers the size, the lines chosen for each size, monochrome and the output settings in your browser. Spoolman labels now carry the same data as built-in ones, including the subtype and the colour name you set, where before they showed neither.
- **SSO logins can keep a user's Bambuddy groups in step with their groups at the identity provider (#3107, requested and contributed by @willuhmjs in #3122)** — Each OIDC provider in Settings → Authentication → SSO/OIDC gains a **Group Claim** (default `groups`) and a **Group Mapping**, a list of rows pairing an identity provider group with a Bambuddy group. On every SSO login, existing accounts included, the mapped Bambuddy groups follow the provider: joining a provider group grants its Bambuddy group, leaving it removes that group at the next login. Groups the mapping doesn't name are left alone, so a manual promotion sticks. This is the same rule the LDAP group mapping uses. Groups are read from the signed ID token, as a list or as a space- or comma-separated string, and matched ignoring case. Claims with a namespace such as `app/roles` work, for Auth0. A missing claim, or a sync that fails, never blocks the login; the user keeps the groups they had. The form offers only existing Bambuddy groups, flags a row pointing at a deleted group, and won't save a half-filled row or a second row for the same provider group. The provider card shows whether group sync is on. With no mapping, a provider behaves exactly as before. Docker and env-var setups use `BAMBUDDY_OIDC_GROUP_CLAIM` and `BAMBUDDY_OIDC_GROUP_MAPPING`, a JSON object whose values are Bambuddy group names. A mapping naming a group that doesn't exist, or one that isn't valid, is refused at startup with the reason in the log, and the app still starts.
- **Spools can carry your own material number, and statistics group by it (#2870, requested and contributed by @Thomansky in #2994)** — A new **Material No.** field in the spool dialog's Additional section holds the internal number you buy and cost a product by, such as `15` for Bambu Lab PLA Basic. Several spools of the same product share it. The field suggests numbers already in use, and surrounding spaces are trimmed, so `15` and `15 ` stay one number. A new spool of a product that already has a number gets it automatically: same brand, material, subtype and colour, whether it is added by hand, in bulk, through the API or by the RFID auto-add. CSV import is the exception: the file decides. The inventory has an optional sortable **Material No.** column, which sorts `2` before `15`, and a filter for one number or for spools without one. Search finds the number, and Bulk Edit can assign it to many spools at once. The Statistics page has a **By Material Number** widget: active spools and remaining stock per number, plus consumption and cost from the usage history, archived spools included, following the dashboard's date range. The number round-trips through CSV export/import and is part of the GitHub backup. The GitHub backup now also keeps a spool's category, low-stock threshold and storage location; a restore dropped them before. In Spoolman mode the number is Spoolman's own article number, shown read-only and edited in Spoolman. Bulk Edit there no longer offers category and low-stock threshold, which Spoolman cannot store, so setting them never took effect.
- **Suppliers are a managed list, and each spool can record where it can be bought and where it was bought (#2988, requested and contributed by @Thomansky in #2996)** — A **Suppliers** button next to Locations on the Inventory toolbar opens the supplier list, in both inventory modes. In the spool dialog you assign any number of suppliers, each with its own article number and a quoted price per kg for comparing sources, and mark at most one as *bought here*. The quoted price is only for comparison; it never changes the spool's cost. You can add a supplier from the dialog without leaving it. A supplier still assigned to spools cannot be deleted. The inventory has an optional sortable **Suppliers** column, a supplier filter, and search matches supplier names and article numbers. A new spool of a product that already has suppliers gets the same list, but never the *bought here* marker. The Statistics page has a **By Supplier** widget: consumption and cost grouped by where each spool was bought, following the dashboard's date range. CSV export has `suppliers` and `purchase_supplier` columns. Import matches the names against your list and never creates suppliers: an unknown name is reported in the preview and that assignment is skipped. In Spoolman mode the assignments are stored in Bambuddy, next to the Spoolman spool.
- **Find a spool by its label number, and assign it to a printer slot from the spool itself (#2978, requested and contributed by @pd81 in #2998)** — Typing `#3` in the inventory search now finds only spool 3. A plain `3` still matches anything containing it, such as #13 or #30, so existing searches behave as before. The spool pickers show each spool's `#ID`, so identical spools can be told apart. A spool with no slot now has an **Assign Spool** button in its editor, which is also where scanning a spool's QR code lands. It opens one dialog to pick the printer, then the AMS, AMS-HT or external slot. Nothing changes until you confirm, and a material mismatch still asks first. The SpoolBuddy kiosk offers the same printer choice when no printer is selected, instead of reporting it disconnected. On dual-nozzle printers the left external slot was labelled "Ext-R" in the assignment confirmation; it now reads "Ext-L". The AMS slots in the dialog can be picked with the keyboard, and screen readers announce each slot by name.
- **Ambient drying can wait until the humidity stays high, so opening the AMS lid no longer buys a drying cycle (#2518, requested by @ryansouza, contributed by @M2ABRAMSTANK in #2895)** — Ambient auto-drying started on the first humidity reading above the threshold. Opening the AMS lid to swap a spool lets room air reach the sensor for a few minutes, and that brief spike was enough to start a cycle of up to 12 hours. A new **Require sustained humidity** switch in the **Queue Auto-Drying** card under Settings → Workflow, shown while **Ambient drying** is on, sets how long the humidity has to stay above the threshold before a cycle starts: 5 to 240 minutes, 15 when first switched on. It is off by default, so nothing changes until it is turned on. The 15 minutes come from a measured trace on an H2D: after the lid had been open for one to five minutes, every unit was back at or below 25% within about 12 minutes of opening, and the wait only starts counting at the first high reading. One reading at or below the threshold starts the wait over, and so does a gap of more than two minutes without a reading (a disconnect, or a print on a printer that isn't drying while printing), which is logged with the measured gap. A missing reading changes nothing. A printer with a scheduled print pending still starts at once, for every AMS unit on it, because that drying has a deadline. The wait also applies to a printer that is printing with **Continue drying while printing** on, but not while ambient drying itself is off. It runs alongside the cooldown after a cycle instead of being added to it, never interrupts a running or manual cycle, and does not log a wait for a unit the printer refuses to dry. Translated in all locales.
- **Other applications can send messages through your notification channels** — A new switch per notification provider, **Messages from connected apps** (off by default), lets an application such as Bambuddy Orders send its own messages ("3 orders need you") to Telegram, ntfy, email and the other channels. The app calls `POST /api/v1/notifications/app-message` with an API key that has the new **Send Notifications** permission (off by default; the key's owner also needs `notifications:update`). Messages go through quiet hours, the daily digest and the notification log like Bambuddy's own. Text is plain, links must be http(s), and each key is limited to 20 messages a minute. `GET /api/v1/notifications/app-message/channels` tells the app which channels take its messages. The check behind the electricity-price door and this one is now one shared helper.
- **The streaming overlay can show the printer model (#3080, requested and contributed by @adamspicedev in #3099 and #3134)** — Settings → API Keys → Streaming Overlay has a new **Printer model** checkbox, which adds `model` to the overlay URL's `show=` list. It can be picked together with the printer name or on its own. With both, the overlay shows `Big Mumma · H2D`; with only the model, `H2D`. A printer with no model stored shows the name alone, without a stray separator. The model is off by default, so every overlay URL already set up in OBS looks the same after upgrading. The token-authenticated feed that OBS reads (`/printers/{id}/overlay-status`) now returns `model` for connected and disconnected printers; it exposes nothing else new. A long name plus model in a narrow OBS source is now cut off with an ellipsis instead of running past the edge of the panel. A printer saved by an older version under a discovery code such as `BL-P001` or `O1D` shows its model name (`X1C`, `H2D`), as on the Printers page, instead of the code.
- **A second streaming overlay design, for portrait and landscape sources (#3177, requested and contributed by @adamspicedev in #3183)** — Settings → API Keys → Streaming Overlay has a new **Artwork** choice: **Classic**, the overlay as it has always looked, or **Version 2**, which adds `artwork=2` to the overlay URL. Version 2 lays itself out for the browser source's shape. In a landscape source the camera fills the frame under a translucent panel at the bottom; in a portrait source (1080 × 1920, for vertical streams) the printer name sits in a header, the camera fills the middle and the print data sits in a panel below it. Portrait crops the camera to fit rather than stretching it, so the sides of the build plate can be cut off. The fields, text size, frame rate, camera rotation and Streaming Overlay token all work as before, and a camera turned 90° still fills its space in either layout. It hides progress, layers and temperatures while the printer is offline, and a finished or failed print shows its status instead of "Printer is idle". The URL names a version number rather than something like "new", so a scene set up today keeps its look when a later design arrives. Classic stays the default, so every overlay URL already in an OBS scene looks the same after upgrading.
- **Queue cards show the filament each job will print with (#3132, requested and contributed by @bgrr74 in #3184)** — Each job in the print queue now shows a colour swatch and name for every filament it uses, so you can check the next colours without opening each job. When a job is mapped to AMS slots on a specific printer, the card names the slot, the spool bound to it and its colour, for example "A1 · eSUN PLA Basic · Bone White", read from the printer's current AMS contents. Jobs without a slot mapping yet, such as "Any P2S", show the colour chosen when queueing, or the colour from the 3MF for the selected plate. Jobs with more than two filaments show just a row of swatches, with the full list on hover. If a mapped slot has been emptied since the job was queued, the card says so in yellow ("A3 · Empty · Caramel"); a spool without an RFID tag is never reported as empty.
- **An app shown in the sidebar can match Bambuddy's theme** — An external link that opens inside Bambuddy now tells the framed page which theme is showing: light or dark, background, style and accent. It sends this when the page loads, whenever the theme changes, and when the page asks with a `bambuddy:theme-request` message. The message is `{type: "bambuddy:theme", mode, style, background, accent}` and goes only to the link's own origin. It carries nothing but those names. Pages that don't listen are unaffected.
- **Connected apps: other applications can sign people in with their Bambuddy account** — Settings → API Keys → Connected Apps registers an app with one exact callback URL and gives it a client ID and a secret, shown once. The app sends the browser to `/connect/authorize`; the user confirms once ("Allow"), and after that sign-in is automatic, so an app opened from the sidebar needs no second login. The app's server then swaps a single-use code for the user's name, email, groups and permissions at `POST /api/v1/connect/token`. It is the OAuth 2.0 authorization-code flow with PKCE (S256 only), kept to what an app on the same network needs: a code lives 60 seconds, works once, is bound to its app, callback URL and PKCE challenge, and is redeemable only with the app's secret; codes and secrets are stored hashed, failed exchanges are rate-limited per app and per IP, and the page never redirects to a callback URL the backend has not matched against the registration. The app never receives the user's password or Bambuddy session, and an API key cannot sign its owner in to an app. Connected apps require authentication to be enabled; with it off, both endpoints answer `auth_disabled` so an app falls back to its own login instead of letting everyone in. The consent page may be shown inside Bambuddy's own frames (`frame-ancestors 'self'`), so an app opened from the sidebar can sign in there; every other page still refuses all framing. See the wiki page *Connected Apps*.
- **A batch can record the external order it fulfils, so an integration can't queue the same order twice** — `POST /queue/batches` accepts `external_source` (e.g. `shopify`) and `external_ref`, a reference to the record in that system; both are returned on every batch and can be filtered on with `GET /queue/batches?external_source=&external_ref=`. The pair is unique: a second create for the same record answers 409 instead of making a second batch, so a connector that retries after losing the response can't print an order twice. Both fields are optional and must be given together; batches created without them behave exactly as before.
- **Colour swatches for printer slots in the Print / Schedule dialog's filament mapping (#3159, requested by @frantiseklorenc)** — The dialog's filament mapping compares the colour the slice asked for against the colour actually in the machine, and until now only the left-hand side of that comparison had a swatch. The right-hand side — the slot, and every slot in its dropdown — was text, and the text is not reliable: a slot's colour name comes from the Color Catalog or, failing that, from hue, so a third-party beige is announced as "Orange". On a farm running twenty or thirty non-Bambu colours that are swapped between machines daily, a "Color mismatch" warning then gives no way to tell a real mismatch from two names for the same hex without opening the printer card in another tab. Each slot now carries its colour, in the picker and on the row, together with its hex; the slot whose colour is exactly the one the slice asked for is ticked. It works for a slot bound to an inventory spool and for one configured through Configure Slot or on the printer itself, which is the distinction that mattered — the second kind has no inventory row behind it and draws the colour the printer reports. A bound spool also contributes what a tray record cannot carry: its remaining colour stops and its effect, so a two-tone or glittery spool draws as itself rather than as its base colour. The same treatment is applied to the filament-override picker used for model-based assignment, which is the same choice on the other dispatch path and would otherwise have stayed text-only. Both controls stop being `<select>`s to do it — an `<option>` renders text and nothing else — and both keep full keyboard operation, listbox semantics and the border colouring that encodes match, same-type-different-colour and not-loaded.
- **Post-print outcome confirmation: say whether a completed print is actually a good part (#1898, requested by @FedericoPuntelli, contributed by @Thomansky in #3047)** — The printer can only report that a print *completed*; a warped, out-of-tolerance or wrong-colour part counted as a success anyway. A print can now ask for a verdict: turn on **Ask for Outcome** in the print dialog, or set it as the default under Settings → Workflow → Queue & Dispatch → Default Print Options, and when the print finishes Bambuddy asks "How did your print come out?" with the finish photo and **Good** / **Reject**. It can be answered in the dialog that opens in the web UI, from the printer card next to the plate-clear button, or from the phone: the new **Outcome Confirmation** notification event puts Good/Reject buttons into ntfy and Telegram notifications and a link to the dialog into every other channel. A reject takes an optional reason from the failure-reason list and offers **Print again**. *Ask me later* leaves an amber **outcome?** badge on the archive card, and the Archives page gets an **Unconfirmed** filter; the verdict stays editable from the card's menu or Edit Archive, and says where it came from (in the app, a link, the printer card, or a plate release). Two further options, both off by default: **Also ask for prints started outside Bambuddy** gives prints started at the printer, in Bambu Studio or in the Handy app the same prompt, and **Count unanswered outcomes as good on plate release** (Plate-Clear Confirmation card) records a still-open prompt as good when the plate is released. Rejected prints don't touch the machine failure rate; Failure Analysis shows them as their own line with a yield figure, and project part counts only count parts that were not rejected. A one-tap link shows a confirmation page and records nothing on a plain open, so a link preview, a mail scanner or a browser prefetch can't answer the question for you; only the notification buttons record in one tap. Nothing changes for anyone who doesn't turn it on: the option is off by default, and the notification event only fires for prints that asked.
- **The outcome prompt can be answered by reacting to the Telegram message (#3046, requested and contributed by @Thomansky in #3129)** — The Good/Reject buttons in a Telegram outcome prompt open a Bambuddy link, which only works when the phone can reach Bambuddy. A thumbs-up or thumbs-down on the message now records the verdict instead: the phone only talks to Telegram, so it works away from home, behind NAT or with the VPN down, and needs no external URL. A Telegram provider gains **Outcome verdict via**: **Inline buttons (link)** (the default, unchanged), **Reaction (👍 / 👎)**, or **Buttons and reaction**. Bambuddy then polls the bot for reactions (one poll per bot, outbound only) and edits the message to say "marked as good" or "marked as reject". The first verdict wins, whichever way it arrives, and a reaction stops counting exactly when the prompt's links would, so a message from an earlier run can't answer a reprint. Use a bot only Bambuddy uses for reactions: another app polling the same bot, such as Home Assistant's Telegram integration, stops receiving its messages. In a group the bot must be an admin to see reactions. The Archives page's **Unconfirmed** filter now lists completed prints only, like the **outcome?** badge.
- **Library files can carry an external link, notes and photos (#3077, requested by @SergioFuchs, contributed by @Thomansky in #3128)** — The File Manager now gives library files what archives already have. **File details** in a file's card menu, or the info icon on a list row, opens a window with the file's facts (size, print details, the MakerWorld source if there is one), an editable notes field, a link, and a photo gallery. Photos can be JPG, PNG or WebP, up to 10 MB each, and open full size when clicked. Only http and https links are accepted. The grid shows a globe icon that opens the link, a notes marker and a photo count. Edits you haven't saved survive the file being refreshed in the background. A file's photos are deleted with it when the trash is emptied.
- **File Manager previews open larger, zoom, go fullscreen and cover images (#2976, requested and contributed by @Thomansky in #2990)** — PDF, spreadsheet and 3D previews now open in the same large window, with a fullscreen button; double-click the preview to toggle fullscreen. PDFs zoom with Ctrl/⌘ + wheel, a trackpad or touch pinch, or the `+`, `-` and `0` keys. In the 3D viewer the wheel no longer zooms past the model into empty space, and the new zoom and reset buttons return to the framed view. PNG, JPG, GIF, WebP and BMP files get a preview with zoom and pan; TIFF keeps its thumbnail but no preview, because most browsers cannot show it. Double-click a file in the grid or list to open its preview, or select one file and use **Preview** in the toolbar. PDFs get **Generate Thumbnail** in the card menu and list row, like STLs. PDFs with Japanese, Chinese or Korean text, JPEG2000 images or ICC colour now render correctly; they came out blank or wrong before, because pdf.js could not load its font maps and image decoders. The page's security policy no longer allows WebAssembly; only the two preview workers that need it do. Very large zooms on iPhone and iPad stop gaining sharpness instead of showing a blank page. All previews run in the browser, not on the Bambuddy server.
- **An app shown in the sidebar can open a Bambuddy page in place** — The frame Bambuddy shows an external link in can't navigate the Bambuddy window, so a link such as Bambuddy Orders' "In Bambuddy" did nothing when clicked inside the sidebar. The framed page can now ask with `{type: "bambuddy:navigate", path: "/queue?batch=12"}`, and Bambuddy opens that page as if its own menu had been used. The request is accepted only from the frame, only from the link's own origin, and only for a path inside Bambuddy; anything else, such as another site or a `javascript:` address, is ignored. The theme message now carries `canNavigate: true`, so a page can tell this Bambuddy from older ones and open a new tab there instead. The frame's sandbox is unchanged.
- **PDFs in the File Manager get their thumbnail the moment they arrive (#2976)** — A PDF's grid thumbnail used to exist only once somebody had opened its preview, because the browser rendered it and posted it back; until then the card was blank. Page one is now rendered on the server with PDFium (`pypdfium2`, a new dependency whose wheels carry the PDFium binary for every platform Bambuddy ships, so no system package is needed) on upload, inside an extracted ZIP and when an external folder is scanned. **Generate Thumbnails** covers PDFs too, so existing ones can be backfilled in one click; its tooltip and its nothing-to-do toast say so in all 15 languages. The thumbnail has the same shape as the browser's (a 256 px square, page centred on white), so old and new cards match. PDFium is not thread-safe, so renders are serialised behind a lock and run off the event loop; the render scale comes from the page's own size, so a PDF declaring a huge page cannot make it allocate a huge bitmap. A PDF it cannot read (damaged, encrypted) gets no thumbnail and still lands in the library, and the browser preview remains the fallback.

### Changed
- **The Slice dialog uses more of a large screen** — The dialog stopped at 1024 px wide however large the screen, and its left column was fixed at 320 px. So preset names were cut off, and every filament row wrapped its label and its "hidden / Show all" note, while the process-settings panel beside it sat half empty. The dialog now widens to 1280 px on wide screens and 1536 px on very wide ones, and the left column takes two fifths of it instead of a fixed width. Below 1024 px it is still a single column.
- **Leftover Web Push code and the unused `pywebpush` dependency are gone (#3171)** — Browser push notifications were removed earlier, but the service worker still carried their push handlers and `pywebpush` was still installed, pulling in `py-vapid` and `http_ece`. Both are removed. `aiohttp` stays, now listed as the direct dependency it is for external cameras, with the same version floor.
- **A STEP preview says it is converting, and for how long (#2976)** — A large STEP export can take over a minute to turn into a mesh in the browser (a 25 MB FreeCAD file took about 75 seconds; coarser meshing settings do not help, the time goes into reading the file), and for all that time the preview showed only a small spinner, which looked like a preview that never opens. STEP loads now show **Converting STEP model… N s** with a running counter and a note that large files can take a minute or more, in all 15 languages. Other formats load in a moment and keep the plain spinner.
- **The frontend build no longer warns about `path` and `crypto` being externalized for the STEP previewer (#2976)** — `occt-import-js`, the Emscripten build behind STEP previews, requires both modules, but only inside its `ENVIRONMENT_IS_NODE` branches; in the browser it loads its `.wasm` from the URL the preview worker passes and draws randomness from `crypto.getRandomValues`. Vite still externalized both and printed two warnings on every build. `vite.config.ts` now drops exactly those two warnings for that one package through `build.rolldownOptions.onLog`, so an externalization anywhere else, or of any other module, still shows.

### Fixed
- **PostgreSQL installs no longer warn at every start that the connection pool may exceed the server** — The built-in pool allowed up to 100 connections (`pool_size` 20 + `max_overflow` 80), but a stock PostgreSQL allows 97 (`max_connections` 100 minus 3 reserved for superusers). So every install that hadn't set `DB_POOL_SIZE` / `DB_MAX_OVERFLOW` logged `DB pool may exceed what PostgreSQL allows` at startup, and under heavy load could hit `TooManyConnectionsError`. The default `max_overflow` is now 60, an 80-connection ceiling that fits. Installs that set their own values are unaffected, and large farms can still raise both, along with the server's `max_connections`.
- **AMS slots that lost their K-profile after a printer restart stayed on the default K, and queued jobs printed with it (#3219)** — A printer that is power-cycled can come back with every slot's K-profile selection cleared (`cali_idx` -1) while the spools, tags and remaining amounts are unchanged. Bambuddy only looked at K-profiles when one of those changed, so it never noticed, and the next queued jobs started on the default K without a warning. Now, while the printer is idle, a loaded slot whose selection is gone gets its spool's stored K-profile back, for built-in and Spoolman inventory and for the external spool. The queue also checks the slots a job uses right before sending it. Only a lost selection is restored: a different profile picked in Bambu Studio is left alone, and so is **Default** picked in Bambuddy's Configure Slot dialog. A slot is retried at most three times, 30 seconds apart; if the profile still doesn't stick (for example because it was deleted on the printer), the log says so and Bambuddy stops until the slot changes. On dual-nozzle printers a slot whose nozzle isn't known yet is skipped rather than guessed.
- **A built-in camera could show the same old picture for hours while everything else updated (#3218, reported by @adamspicedev; also #3189, reported by @Sawtaytoes)** — After a camera connection dropped, the `ffmpeg` process that converts it for the browser could stay running with no connection to the printer, repeating its last frame about 30 times a second. On a P2S this went on for two hours until the process was killed by hand. Bambuddy treated every repeated frame as a sign of life, so it never reconnected, and the camera status said the stream was healthy. Now only a frame that differs from the previous one counts as new. After 20 seconds of identical frames, Bambuddy restarts `ffmpeg` and reconnects, and open viewers, overlays and the Cam Wall stay connected. A working camera practically never sends two identical frames, but a completely dark chamber can. When the picture after a restart is exactly the same as before, Bambuddy treats it as a still picture and only checks again every 5 minutes, until the picture changes.
- **Orca Cloud filaments assigned to an AMS slot showed up in OrcaSlicer as Generic (#3216, reported by @mrnoisytiger)** — OrcaSlicer's **Sync filaments** finds a slot's preset by the filament ID stored in the slot and nothing else. OrcaSlicer's own Device tab writes the profile's filament ID there (`Pfc74047` in the report). For the same profile, Bambuddy wrote the generic ID for the material (`GFL99`), so Sync filaments warned that the filament may not be compatible and used Generic PLA. Bambuddy looked the ID up in the browser, and when that came back empty it used the generic ID without saying so. Nothing in the log showed why. The lookup now happens on the server when the slot is configured, and its result is logged. A profile that only stores its changes against another one now takes the filament ID from that parent: either another of your Orca Cloud profiles, or the Bambu filament it was copied from (for example `GFA00` for Bambu PLA Basic). When no ID can be found, the slot still gets the generic ID, not the filament that was in the slot before, and the dialog shows a warning saying the slicer will see Generic. Also fixed: after a slot was changed from OrcaSlicer's Device tab or the printer's screen, the slot card and the Configure dialog kept showing the preset Bambuddy had last set. Bambuddy now saves the filament ID along with the slot's preset and stops showing that preset once the printer reports a different filament. Slots configured before this update are only checked this way for Bambu's own filaments. Also fixed: re-configuring a slot for a different filament could leave the slot on its old filament. The Configure dialog kept offering the slot's active K-profile, which belongs to the old filament, and selected it automatically. Bambuddy then switched the slot to that K-profile's filament, so OrcaSlicer kept showing the old one until the slot was reset first. The slot's active K-profile is now only offered while the dialog is still on the slot's current filament.
- **Turning off "Check printer firmware" stops every firmware lookup** — With the setting off, opening the Printers page still asked bambulab.com once per printer: the page decided before its settings had loaded, and the server answered the request without looking at the setting. The page now waits for the setting, and the server enforces it as well, for both the per-printer and the all-printers check. The lookups could also take a long time on a fresh start (30-second timeouts with fallbacks); on a connection without HTTP/2, which includes a plain `http://` address on the local network, they could hold the browser's few connections and delay the rest of the page.
- **The stream overlay's camera recovers from a frozen picture on its own (#3205, reported and contributed by @adamspicedev in #3213)** — When a printer stopped sending frames, Bambuddy ended the camera stream, but the overlay kept showing the last frame and only reconnected if the browser reported an image error, which it doesn't in that case. An unattended overlay in OBS or Meld Studio then stayed frozen until its browser source was refreshed, while the printers page, which checks the camera status, reconnected by itself. The overlay now renews its camera connection every 60 seconds, and still retries 3 seconds after an image error. A renewal joins the camera stream Bambuddy already has open for that printer and shows the latest frame at once, so a working picture doesn't flicker. The overlay URL, token, FPS and rotation are kept. With `camera=false` the overlay makes no camera requests.
- **Stream overlay and Cam Wall links keep working after a reload (#3204, reported and contributed by @adamspicedev in #3212)** — Opening an `/overlay/…?token=…` or `/camwall?token=…` link treated the token as a login: Bambuddy removed it from the address bar and tried to sign in with it, which a streaming token can't do. The page worked the first time, but a reload (or an OBS or Meld browser source restarting) had no token left and stayed on **Loading…**. In a browser that was already signed in, the failed attempt also signed the user out. The token now stays in the link and is used only by the overlay or Cam Wall, and an existing login is left alone. SpoolBuddy kiosk links still sign in with their API key as before.
- **The File Manager reaches the bottom of the window again (#3215, reported by @koder-guy)** — On desktop the File Manager and the G-code viewer were sized as if a 64px top bar sat above them, but that bar only exists in the mobile layout, so both pages stopped 64px short and left an empty band under the file browser. They now fill the full window height.
- **Progress milestones no longer send 75% at the start of a print, and 25% and 50% arrive again (#3211, reported by @BurgerKerman)** — An A1 mini reports a progress of 85% in the first moment of a print, while it is still heating the bed, and then values such as 3%, 40% and 44% through its calibration, before the first layer starts at 45%. Bambuddy read that 85% as progress and sent the 75% milestone together with Print Started, with an unknown remaining time. With 75% then on record, the 25% and 50% milestones of that print never fired. Milestones now count only from the first printed layer, and every new print starts them from zero. A printer that started layer 1 already past 25% sends the 25% milestone then. Until a print's layer count is known, the printer's preparation stage (bed preheating, homing, calibration) holds milestones back the same way. Printers that report neither behave as before.
- **A printer that refuses uploads no longer empties the print queue (#3210, reported by @Leander-Vh)** — When a printer's file service would not take a file, the queue marked the job failed. That left the printer idle, so the next pass gave it the next job, which failed the same way: one P2S whose file service answered `421 There are too many connections` failed 43 queued jobs in ten minutes. When the file never reached the printer (the connection was refused, timed out or dropped), the job now stays in the queue, and the printer gets no new jobs for five minutes. The wait doubles with each refusal in a row, up to an hour, and the first upload that gets through resets it. Jobs for any printer of that model go to the others, and a job assigned to that printer shows "*printer* is not accepting files — Bambuddy will retry automatically" until it can be sent. One Job Waiting notification goes out per outage, not one per retry, and **Keep bed warm between prints** does not heat a printer that is waiting this way. A rejected access code, a full SD card (including an FTP 452 reply, which used to be read as a network error) or an upload too slow to finish still fails the job, because a retry would fail the same way.
- **Re-reading a slot's RFID says when the printer refuses, and older firmware gets the command it understands (#3206, reported by @Sawtaytoes)** — The refresh sent `ams_get_rfid` and reported success without listening for the answer, so an X1C on X1Plus (base firmware 01.08.02.00), which answers it with `FAIL` / `ERROR STATE`, showed "Refreshing" while nothing happened, and the K profile was re-applied to a slot that had not been read. Bambuddy now waits for the printer's answer. When `ams_get_rfid` is refused by an X1, P1 or A1 printer that is not printing, it sends `M620 R<tray>`, the command Bambu Studio uses for those models; printers that accept `ams_get_rfid` never see it. If the printer refuses both, the refresh shows an error with the printer's reason and nothing is re-applied. A printer that does not answer at all is still treated as having taken the request, as before.
- **The `{finish_photo_url}` link in a notification opens when authentication is on** — With authentication on, the link pointed at the archive's photo page, which needs a login that a link tapped in Telegram, CallMeBot or a Home Assistant notification can't carry, so it only ever showed an error. With authentication on the link now points at a copy of the photo under a long random name, which opens that one photo and nothing else and stops working after 3 days. With authentication off the link is unchanged. Photos attached to the message itself were not affected.
- **The Reorder Alert and Stock Break Alert notifications are now actually sent (#2955, reported and contributed by @ojimpo in #3196)** — Both events could be switched on for a notification provider, but nothing in the backend worked out when a SKU was low: the Forecast panel on the Inventory page did that in the browser, so no alert could ever fire. Bambuddy now runs the same forecast once an hour, from your own inventory or from Spoolman, and sends an alert when a SKU reaches its reorder point or will run out before a reorder could arrive. Each SKU alerts once when it enters a condition and again only after it has cleared; one that gets worse, from reorder to stock break, alerts again. A SKU with its alerts snoozed is skipped, and a provider with both events on gets the stock break message only. What has been sent is stored, so a restart or an update does not send the alerts again. The default templates now name the subtype and colour, so two colours of one filament no longer send the same message; a template you have edited is left as it is.
- **Reading a 3MF's details no longer loads all of its geometry into memory** — To find the title, designer and MakerWorld link, Bambuddy read the whole `3D/3dmodel.model` entry into memory. A plain 3MF keeps its meshes in that same entry, so a large one cost hundreds of MB just to read a few metadata lines; a combined plate at the size limits pushed memory from 1.0 to 1.7 GB. The mesh data is now streamed past, and saving a 3MF to the library parses it without holding up other requests.
- **The queue starts jobs in the order you put them, whether they're pinned to a printer or queued for "Any <model>" (#3200, reported by @bgrr74)** — With a job pinned to a printer dragged above two "Any P2S" jobs, the printer finished and started one of the "Any" jobs from further down, while the pinned job sat at the top showing "Busy". The scheduler sorted the queue by target first and position second, so position only counted among jobs with the same target. Which job won a printer both wanted then came down to the database: on SQLite "Any" jobs always won, and on PostgreSQL pinned jobs did. The scheduler now follows the order the queue page shows, and so does Shortest Job First, whose starvation guard now also protects a pinned job that an "Any" job jumped, and the other way round. New jobs, batch copies, virtual printer and webhook uploads go to the end of the whole queue, not the end of their printer's part of it, and "add to top" puts them at the top of the whole queue. The **Next in queue** line on a printer card used the same ordering and kept naming a lower "Any" job; it now names the job in queue order too (it does not follow Shortest Job First). Likely also the cause of #1808.
- **Settings tabs keep their icons when a label is long (#3191, reported and contributed by @Thomansky in #3192)** — In German the Notifications tab lost its bell: "Benachrichtigungen" plus the provider count didn't fit the tab list on wide screens, and the icon was squeezed to nothing instead of the word. The tab list is a little wider now, and tab icons, counts and status dots always keep their size, so a long label can only wrap. "Virtueller Drucker" also fits on one line again.
- **"Print labels…" starts from the spools you ticked (#2980, reported by @apizz)** — With spools ticked in the inventory list, the header's **Print labels…** button still opened the label picker with every visible spool selected, so you had to find your spools again. It now starts from the ticked spools, and from every visible spool only when none is ticked.
- **In Spoolman mode, a new Bambu Lab roll links to a filament of its own product line (#2907, reported and contributed by @ojimpo in #2944)** — Bambuddy matched a new roll to a Spoolman filament by material and colour alone. Several product lines share a colour, so a PLA Matte Charcoal roll was linked to the PLA Basic "Black" filament, took its name and density, and showed up as Black. The same happened to other lines: PLA Tough took PLA Basic's library entry, PLA Silk White took "Aero White", and PETG HF took plain PETG's. The match now also checks the product line the AMS reports, both among your existing filaments and in the Spoolman filament library, and each roll takes its own library entry and density. New filaments are named for the line ("PLA Matte"), including ones taken from the library, and the colour name ("Charcoal") is stored on the spool. Spoolman mode now shows the same subtype and colour name as the built-in inventory. When no filament or library entry fits the line, Bambuddy creates one from what the AMS reports instead of taking the first one with the same colour. Filaments that earlier versions named after a colour ("Black") are still reused, so existing installs don't get duplicates. A filament you renamed yourself in Spoolman is no longer reused for new rolls.
- **LDAP group mapping finds groups on lldap and OpenLDAP (#3197, reported by @TOFM)** — Every login from an lldap directory got the Default Group, even for a user who was a member of a mapped group. Bambuddy read membership from the user's `memberOf` attribute but asked the server for "all attributes". lldap, and OpenLDAP's memberof overlay, leave `memberOf` out of "all attributes" and only return it when it is asked for by name. Bambuddy now asks for it by name wherever the directory's schema has it. It also asks the groups themselves which `groupOfNames` and `groupOfUniqueNames` entries list the user, searching from the directory root, because groups usually sit beside the users (`ou=groups` next to `ou=people`) rather than under the search base. That covers OpenLDAP without the memberof overlay, where there is no `memberOf` at all, and OpenLDAP with an overlay that tracks only one group class. Active Directory keeps `memberOf` complete and is not searched the second way. Checked against lldap 0.6.3, OpenLDAP 2.6 with and without the overlay, and Samba AD. Smaller things from the same report: **StartTLS now works with Active Directory and Samba AD**, which it never did: straight after StartTLS, and before logging in, the LDAP library read the server's schema, which those directories only allow once logged in, so every StartTLS connection failed with "operationsError" (LDAPS was unaffected); **Test Connection** against a server that doesn't offer StartTLS (lldap only does LDAPS) now says so and suggests LDAPS, instead of "Unsupported extended operation" and a number; support bundles no longer mask part of a longer dotted number such as that one as an IP address, which had made the message unreadable; and a user's first LDAP login logs the "no mapped groups" warning once instead of twice.
- **In Spoolman mode, each spool's own size is used, not its filament's (#3194, reported by @worried-networking)** — Spoolman stores how much filament a full spool holds on the spool (**Initial Weight**) and uses the filament's **Weight** only when the spool has none, so one filament can have spools of different sizes. Bambuddy read only the filament, so a 250 g spool of a 1000 g filament showed as 1000 g with the wrong fill level, **Sync Weights from AMS** and AMS-percentage usage tracking charged it four times the real grams, and the AMS hover card's Spoolman fill level was off the same way. All of these, the weigh action and the SpoolBuddy scale now use the spool's own size. Creating a spool writes its **Label Weight** to the spool's Initial Weight, so a 250 g spool of a 1000 g catalogue filament is recorded as 250 g. Editing the Label Weight changes only that spool: it used to change the filament's weight while Spoolman kept the spool's old size, so the two disagreed from then on, and on a filament shared with other spools it linked this spool to a new duplicate filament instead. The spool form's **Cost per kg** is stored as Spoolman's spool **Price**, which Spoolman treats as the price of the whole spool; it is now converted at the spool's size both ways, and print cost divides a spool's own price by the spool's size. A catalogue price on the filament is still divided by the filament's weight. For 1000 g spools nothing changes. Saving a spool without changing its size or price no longer writes either, so a 250.7 g spool stays 250.7 g. Editing a spool that has no weight in Spoolman at all, on the spool or its filament, failed with an error; it now saves, and a Label Weight saved from the spool form becomes the spool's size.
- **In Spoolman mode, weighing a spool now uses the vendor's empty spool weight (#3195, reported by @worried-networking)** — Spoolman finds a spool's empty weight in three places: the spool's own **Spool Weight**, then the filament's, then the vendor's **Empty Spool Weight**. Its own `/measure` endpoint uses that order. Bambuddy stopped after the filament and used 250 g instead of the vendor's value. So a spool whose tare was set only on its vendor weighed against the wrong core: a Sunlu spool (211.7 g) at 1177 g on the scale was saved as 927 g remaining instead of 965.3 g. The same error was in three places, and each is fixed: the weigh action in the inventory, the SpoolBuddy scale, and the **Empty Spool Weight** shown in the spool form and used for gross weight in the list. All three now share one lookup, so they can't drift apart again. The SpoolBuddy "no spool weight set, using 250 g" warning now appears only when the spool, the filament and the vendor all have no weight. The spool form still sends the empty weight to Spoolman only when you change it, so opening and saving a spool does not copy the vendor's value onto it. Changing a filament's spool weight with **Keep old weight for existing spools** now keeps a vendor-inherited tare too: when the filament had no weight of its own, the spools that inherited the vendor's value get that value, not the new filament weight.
- **A P1P, P1S or X1E added by discovery is saved as the right printer** — Bambu printers announce themselves with an internal code, and the table that turns it into a model name had the P-series codes shifted: a discovered P1S was saved as a P1P, a P1P as a P1S, and an X1E as a P2S. The same mix-up sat in the backend: a file sliced for a P1P or P1S could say it was sliced for an X1C or X1, the X1E's code checked the P2S firmware line, and the P2S's code was missing. All of them now agree with what the printers and 3MF files actually report. Printers saved under a raw code by an older version also get the right ethernet, rod-type and storage handling. A printer that was already saved with the wrong model keeps it: pick the right one under **Model** in **Edit** from the printer card's menu.
- **The Low Filament notification now fires (#2913, reported and contributed by @ojimpo in #2940)** — The event had a toggle on every notification provider, but nothing in Bambuddy ever sent it, so switching it on did nothing. It now alerts when a spool assigned to an AMS, AMS-HT or external slot drops below its low-stock threshold. That is the same global percentage (default 20 %) and per-spool override that drive the Low Stock count on the Inventory page, so the alert and the count agree. Remaining filament comes from the spool's weight, not the AMS remain percentage, which can be far off. It works with the built-in inventory and with Spoolman; with Spoolman only the global threshold applies. Each spool alerts once per slot and can alert again after it goes back above the threshold, for example when a fresh one is loaded. Archived spools and slots with no assigned spool never alert. The check runs every 30 seconds and does nothing unless a provider has the event switched on. `{color}` is now filled in for custom templates. If you switched Low Filament on in the past, expect one alert for each assigned spool that is already low after updating, and again after each restart while it stays low.
- **A live camera view no longer stops for good after about half an hour on X1, H2 and P2 printers** — These printers' camera streams come over RTSP, and the printer ends each session after a while; a stock X1 Carbon ends every one after exactly a minute. Bambuddy reconnects straight away, so viewers never notice, but every reconnect counted against a limit of 30 for the life of the stream. Half an hour into a print the camera stopped and did not come back until the page was reopened. The limit now counts failed attempts in a row, and a session that delivered video resets it. A printer that refuses the camera for a while, for example because another app is on it, used to be given up on after 30 attempts in nine seconds. Bambuddy now waits longer between failed attempts, up to five seconds each, so it gets about two minutes. External cameras had the same problem with a limit of three: a camera server that ends its sessions now and then stopped the stream on the fourth drop. External streams now always reconnect after a session that delivered video. Found while investigating #3189.
- **A slot that reads empty for a moment no longer loses its spool assignment (#3186, reported by @Sawtaytoes)** — An idle X1 Carbon sent one status update that showed a whole AMS unit as empty, with no colour or material in any slot, and Bambuddy deleted all four spool assignments on it at once. The spools never moved, and the next update reported them again. Nothing brought the assignments back, and for a non-RFID spool the assignment is the only record of which spool is in the slot. The #3100 fix covered a blank slot the AMS still reported as occupied, but not one briefly reported as empty. A slot that looks empty, or that drops out of the AMS data, now keeps its assignment for two minutes and loses it only if it is still empty then. Bambuddy checks again by itself when the two minutes are up, so a spool that was really taken out does not wait for the next AMS change. A different spool the AMS can identify, by its RFID tag or its colour and material, still releases the old assignment immediately. A spool it cannot read that goes in during those two minutes releases it once they are up, rather than inheriting the old spool's assignment. Assigning a spool to the slot yourself cancels the wait. Spoolman mode's slot links follow the same rules.
- **Number fields can be cleared and retyped (#3182, reported by @Carter3DP)** — Every number field corrected its value on each keystroke, so erasing the "1" in the print dialog's Quantity snapped straight back to 1, and getting to 6 meant typing 16 and deleting the 1. It was worse where the minimum is above 1: typing the "6" of 60 into the AMS drying temperature turned it into 45, so the field could only be set with the arrows. Fields now keep what you type while you edit, use it once it is a number in range, and settle on leaving the field: out-of-range numbers are pulled into range, and an empty field goes back to its default. This covers the 38 number fields across the print dialog, per-plate quantities, scheduling, drying, Settings, smart plugs, backups, spools, projects and SpoolBuddy. Two fields could not be set to 0 even though 0 is allowed, the smart plug's delay after drying and AMS humidity; they can now. The drying presets now also keep to their own limits, 30–65 °C on an AMS 2 Pro and 30–85 °C on an AMS HT.
- **Installing or updating no longer runs out of memory on 2 GB machines (#3181, reported by @PhilippeP62)** — Every installer and updater builds the frontend with `npm run build`, which also ran the TypeScript type check. That check alone needs about 1 GB of Node memory, the whole default allowance on a 2 GB machine such as the standard Proxmox LXC or a 2 GB Raspberry Pi, so the build crashed with "JavaScript heap out of memory". On the Proxmox helper script that left the install without its database and nobody could sign in; Bambuddy's own update script rolled back but could never finish an update. The build now only bundles the frontend, and the type check runs on its own in development and CI (`npm run typecheck`). That also fixes CI's type-check job and the pre-commit hook, which ran `tsc --noEmit` against a config that lists no files and so had been passing without checking anything.
- **Remember Me is back on the login page when only SSO sign-in is allowed (#2784, reported and contributed by @vuthanhtrung2010 in #3117)** — Turning off local username/password login hid the whole sign-in form, and the Remember Me checkbox went with it. An SSO sign-in could then only ever last until the browser closed, so SSO users signed in again every time they came back. The checkbox now sits above the SSO buttons when local login is off, and the "or continue with" divider, which had nothing left to divide, is hidden. Signing in with Remember Me unticked now also clears a choice left over from an abandoned attempt; before, ticking it, backing out of the sign-in provider and then signing in unticked still kept you signed in. With automatic SSO sign-in configured, Bambuddy now also remembers the page you were trying to open and returns you there after signing in, instead of to the dashboard. Automatic sign-in redirects before the page can show the checkbox, so those sign-ins still last only until the browser closes.
- **A queued file whose only plate isn't plate 1 now prints instead of hanging the printer (#2947, reported and contributed by @sgiffhorn in #2951)** — A queue item with no plate chosen was always sent as plate 1. A file exported with a single plate keeps that plate's original number, so a file holding only `plate_2.gcode` made the printer look for a plate that isn't there. The printer accepted the command, raised an HMS error and sat idle until it was power-cycled, while the queue blamed the SD card. An item with no plate now prints the lowest plate the file actually contains, and falls back to plate 1 only when the file can't be read. A stored plate of 0 counts as no plate. The same plate is now used everywhere a queued print is prepared: the G-code tweaks, filament usage, the H2C nozzle-rack checks, the external-spool check and the print command. Before, each one assumed plate 1 on its own.
- **A Spoolman spool's own empty spool weight is saved, so weigh-ins subtract the right tare (#2908, reported and contributed by @ojimpo in #3011)** — Spoolman keeps an empty spool weight per spool, and Bambuddy already read it ahead of the filament type's. It never wrote it: the Inventory form hid the picker behind "Empty spool weight is managed per filament type in Spoolman", and the backend dropped the value on create, bulk create and edit. A spool whose real empty weight differs from its filament type's, for example a 180 g third-party spool against Bambu's 250 g, recorded a wrong remaining weight on every weigh-in. The picker now shows in Spoolman mode and saves to the spool. It is sent only when you change it, so a spool you don't touch keeps following its filament type. Copying a spool keeps its own empty weight, and a 0 g empty weight (a spool-less coil) loads as 0 instead of 250. The SpoolBuddy quick-add no longer sends a placeholder 250 g, and Inventory's bulk edit, whose Empty Spool Weight field was silently ignored in Spoolman mode, now applies it.
- **SpoolBuddy showed a multi-colour or effect spool as one flat colour (#3033, reported by @Sawtaytoes)** — The Filament page paints a spool's extra colours and effect: a blue-and-yellow split, a marble swirl, a galaxy sheen. SpoolBuddy drew every spool from its main colour alone, so a blue-and-yellow Silk spool was a blue disc, and three Galaxy Black spools were three identical black discs, on the screen used at the printer to pick the spool to load. The spool discs on the Inventory cards, the spool details, the tag-scanned and link-tag screens, and the small colour dots on the Inventory cards, the AMS slot menu, the Assign to AMS screen and the Write Tag screen now use the same painter as the Filament page whenever a spool has extra colours or an effect. A plain spool looks as before. A scanned tag now also sends the spool's extra colours and effect to SpoolBuddy, which it did not before. Spoolman spools show their extra colours; Spoolman has no effect field, so they show no effect.
- **HMS faults show Bambu's own description and the right level, and faults Bambu publishes no text for no longer vanish (#2728, reported by @gzimbric)** — Two problems in how printer faults were shown, both in the same path. **No description for most faults.** A fault from the printer's `hms[]` list is identified by a 16-digit code, but Bambuddy's table of descriptions only had the 8-digit codes of the other kind of fault (`print_error`), and the lookup cut the 16-digit code down to a shape that could never match a real one. So those faults never got text, and the printer card only showed them if they happened to offer action buttons. On the reporter's P2S, three faults the printer was holding showed nothing at all. Descriptions now come from Bambu Studio's own HMS files: about 6,400 codes, with the text for your printer model where models differ (`0300_8001` means "paused by the user" on some models and "paused by a pause command in the file" on others). The 24 texts Bambuddy had that Bambu Studio doesn't are kept. `scripts/generate_hms_catalog.py` regenerates the table from a Bambu Studio checkout. **Wrong level.** The level was read from the part of the code that names the printer part, not from the level the printer sends, so a fault that paused the print could show as blue "Info" and a mere notice as red "Serious". It now uses the printer's level, the way Bambu Studio reads it: **Error** (print stopped), **Warning** (print paused), **Notice** (print carries on). The printer card turns red for Error and Warning, amber for Notice only. A `print_error` has no level of its own, so it takes one from its error number (4xxx Error, 8xxx Warning, Cxxx Notice) instead of always showing Warning. **What counts.** A fault counts toward the printer card, the problem badge and the Camera Wall when it offers action buttons, or when Bambu publishes text for it, except an `hms[]` Notice with no buttons: those are things like "The top cover is open" or "the chamber is hot, fan speed increased" that a printer can hold through a whole print. A `print_error` prompt at the Notice level still counts, as before. Faults that don't count are no longer hidden: the error modal lists them, with their text where Bambu has one, collapsed under **Also reported, not counted**, and **Clear Errors** shows whenever the printer holds any fault. **Notifications and the MQTT relay** follow the same rule. Printer-error notifications now also go out for `hms[]` faults that count and have a description, which before this almost never happened, and the relay's error topic carries the faults that count; the H2S cancel echo, which the old check dropped only by accident, stays out. The old check that was meant to skip minor messages read the wrong field, and on the real level it would have skipped the faults that stop a print (spotted by @ojimpo). A fault already notified was recognised by the printer part alone, so a second fault on the same part, such as the two #1840's H2C held at once (`0500-0600-0002-0005` and `-0006`), was never notified; each fault is now recognised by its full code. **Other changes.** The queue's failure message labels an `hms[]` fault with its full code, as the printer screen shows it, such as `0500-0300-0002-000E`, instead of a short code nobody can look up. The status response, WebSocket and Camera Wall carry `description` and the new `severity` values; anything that reads `severity` through the API or the MQTT relay will see different numbers for the same fault. The level labels and the new modal text are translated in all 15 locales.
- **A print the printer's AI camera stopped for spaghetti is archived with a failure reason (#2946, reported and contributed by @ojimpo in #2954)** — When the onboard AI print monitor halts a print for spaghetti or a model coming off the plate, the printer raises HMS code `0300_8003`. That code was missing from the list Bambuddy uses to name a failed print's reason, so the archive was saved with no reason at all, even though its neighbour `0300_8004` (filament runout) was on the list. `0300_8003` and `0C00_8042`, the same AI detection reported from the motion-controller module, now archive as **Spaghetti / Detached**, the option the archive editor already offers, shown in your language. Two nearby codes are left out on purpose: `0C00_C004` ("Possible spaghetti failure was detected") is a warning while the print keeps running, and `0300_800A` is a filament pile-up in the waste chute, not a failed print. Archives saved before this keep their empty reason and can be set by hand. New tests also check that the failure reasons the backend accepts match the ones the archive editor offers, and that every one has English text.
- **A drying command the AMS never started no longer shows as an active cycle, or holds the queue forever (#2896, reported and contributed by @M2ABRAMSTANK in #3096)** — A printer can accept an AMS drying command and set its timer without ever starting the cycle. On the reporter's H2D, mid-print, two AMS-HT units were counting down and heating while a third sat at 720 minutes, cold, and its card still showed the amber drying badge. Bambuddy now notices when a unit's countdown hasn't moved for 150 seconds while the AMS reports no drying phase. A live countdown moves once a minute, so a real cycle is never mistaken for one. The card then shows a grey **Drying not running** badge instead, without the countdown and with Stop still available. It says "not running" rather than "not started" because a cycle paused partway looks the same. If the AMS does report checking, drying or cooling, it always counts as drying. The same timer also never reaches zero, so everything that waited for drying to end waited for good. With **Block queue until drying finishes** on, the queue held that printer indefinitely. A scheduled drying run stayed "running" forever, and the AMS temperature alarm stayed muted on a unit that wasn't heating. Now a printer whose only timers are parked doesn't hold the queue, and doesn't make a scheduled run wait. A scheduled run whose timer parks goes back to the queue if a print is running. On an idle printer it fails with the reason "the printer accepted the command, but the AMS did not start drying". In both cases the timer is left on the printer, since it may still start once power frees up. The temperature alarm treats a parked unit as not drying, and the printer card no longer counts one when deciding whether a dropped file prints now or queues. A failed scheduled drying run now shows its reason in your language instead of in English. Translated in all locales.
- **Saving an empty value for a number setting through the API no longer breaks the Settings page** — A direct API call, script or Home Assistant `rest_command` could send `null` for a number setting such as the keep-warm bed temperature. Bambuddy stored it as the text "None", and from then on every load of the settings failed with an error, for every setting on the page, until the database was fixed by hand. A `null` for a setting that can't be empty, whether a number or an on/off switch, is now refused with a message that names the setting, and nothing from that request is saved. A setting already stored that way now loads as its default, so an affected install recovers on its own.
- **"Reset usage to 0" on a Spoolman spool set it back to full (#2906, reported and contributed by @ojimpo in #2939)** — The reset set Spoolman's `used_weight` to 0. Spoolman calculates the remaining weight as initial minus used, so the spool jumped back to full and its measured remaining weight was lost: a roll with 737 g left read 1000 g, and later prints were charged against filament that wasn't there. The confirmation dialog promised the opposite, that the spool and its remaining weight would not change. The reset now stores the used weight at that moment in a Bambuddy field in the spool's custom fields (`bambu_weight_used_baseline`), the same way it has always worked without Spoolman, and Bambuddy subtracts it when it shows the consumed counter. Spoolman's initial, used and remaining weights are left untouched, and so is every other custom field. The value is stored as text because Spoolman sets a field's type on first use and never lets it change; a number would have been rejected on every install. The bulk reset works the same way. Spools already reset by the old version stay as they are: their remaining weight was overwritten in Spoolman, so they need re-weighing.
- **Filament printed from the external spool was deducted from an AMS spool (#3166)** — The firmware doesn't accept the external spool in a print command's `ams_mapping` list. So BambuStudio and Bambuddy's own dispatch both write it there as -1, the same value as an unused slot, and put the real target in `ams_mapping2`. Bambuddy read only the first list, so an external-spool print looked unmapped, and usage tracking fell back to guessing by position: the first loaded AMS slot. The reporter's H2D charged every external-spool print that way, including 225 g of ABS taken from the PLA spool in AMS slot 1; the same was reported on H2S and P2S. The external spool is now read from `ams_mapping2` (left or right on dual-nozzle printers). A slot the mapping marks as unused is no longer given a tray by position. When a mapping names no tray at all, the tray the printer reports decides instead. The last change also stops an unused slot from taking over the external spool that another slot really used and dropping that slot's weight (#2880).
- **A connection check that overruns in the support bundle now says which step hung, and keeps what finished (#3164)** — The support bundle gives each printer's connection diagnostic 15 seconds and used to discard the whole result when it overran, recording only `timed_out`. A 14-printer farm's bundle came back with that marker on every printer and nothing else, so it could not show which check was slow or whether the printers were reachable at all. The diagnostic now records each check as it finishes and the step it is on; a timed-out entry carries `stalled_in` (the step that was still running), `elapsed_s`, and the checks that completed before it.
- **Two inventory notification toggles could never be turned on, so stock alerts have never been able to fire (#2945, reported by @ojimpo; regression tests contributed by @ojimpo in #2956)** — `on_stock_reorder_alert` and `on_stock_break_alert` exist as columns on a notification provider, have their own templates, and `notification_service` looks providers up under exactly those names before sending. The whole UI is there too: a toggle in Add/Edit Notification, a badge on the provider card, the field in the API client's types, and tests for all of it. The one thing missing was the schema. `NotificationProviderCreate`/`Update` never declared either field, and Pydantic drops what it does not declare, so every request that carried them came back `200 OK` with the row unchanged — and `_provider_to_dict`, which is a hand-maintained field-by-field map, never returned them either, so the toggle read back off no matter what the database held. Nothing errored anywhere along that path. Both directions are wired now, and the round-trip tests that already covered the Home Assistant toggles cover these too, because the failure is structural rather than particular to one field: any column missing from those two maps is invisible to a test that builds providers through the ORM, and only a create-then-re-read through the route catches it. This makes the setting stick and report itself honestly; what actually sends the alerts is the #2955 entry above. The tests no longer depend on anyone remembering the next field, either. They now read the list of provider fields from the database model itself, so a toggle or setting added later is checked from the day its column exists, with no new test to write. It must be accepted when a provider is created and when it is edited, and every toggle must survive a save and read back from both the single-provider and the list endpoint. Each toggle is set to the opposite of its default for that check, because nine of them default to on and a test that saves "on" and reads back "on" would pass even if the value were silently dropped.
- **PDF previews in the File Manager failed on any browser older than Chrome 145 or Firefox 144 (#2976)** — Every PDF showed "This file cannot be previewed." pdf.js 6 calls `Map.prototype.getOrInsertComputed` and other recent APIs directly, and the preview loaded its standard build, which assumes them. It now loads pdf.js's legacy build, which bundles polyfills for both the page and the worker. The worker is also bundled through Vite (`?worker&url`) instead of being copied as-is: the copied file kept a class static block that Safari 16.0-16.3 cannot parse, and `build.target` now lowers it like the rest of the app. The Safari 16 baseline check missed that file because it only scanned `.js` output; it now scans `.mjs` too. Checked in a real Chromium without the API, under the app's own Content-Security-Policy: a two-page text PDF renders, pages, and reopens.

### Security
- **Bumped `PyJWT` to 2.15.1 and `urllib3` to 2.8.0** — PyJWT 2.14 and 2.15 fix thirteen advisories, most of them algorithm confusion when one `decode()` call accepts both an HMAC and an asymmetric algorithm, and JWKS fetching through `PyJWKClient`. Bambuddy's session tokens accept only HS256, and SSO fetches the identity provider's key set itself before handing it to PyJWT, so neither path was open to these. The fixes for deeply nested or malformed tokens, and for JWK Sets with one bad key (which now skip that key instead of failing the whole set), do reach the SSO sign-in. urllib3 2.8.0 fixes three advisories in response streaming and HTTPS-proxy TLS; Bambuddy doesn't use urllib3 itself, it arrives through other packages. `virtualenv`, which only the development tools pull in, is pinned to 21.7.13 or later so `pip-audit` stays clean.
- **Bumped `dompurify` to 3.4.16 for a low-severity DOM XSS advisory** — In 3.4.13 to 3.4.15, sanitizing with `IN_PLACE` and an `afterSanitize` hook that removes nodes could leave event handlers armed on the detached subtree. Bambuddy uses DOMPurify for project notes, project pages and MakerWorld descriptions, always with a plain `sanitize()` call, no `IN_PLACE` and no hooks, so it was not exposed. The bump keeps the dependency clean.
- **Bumped `js-yaml` to 5.4.2 for a merge-key denial-of-service advisory** — In versions up to 5.4.0, the `maxTotalMergeKeys` limit does not count empty mappings. A small YAML document that merges a long list of `{}` many times (`<<: *arr`) can keep the CPU busy for seconds per few hundred kilobytes without ever reaching the limit. It only applies when merge keys are enabled, which means the YAML 1.1 schema. The fix counts each merged mapping towards the budget. **No running Bambuddy install was exposed, and the issue was not reachable at build time either.** `js-yaml` is a development-only transitive dependency, pulled in by `eslint` through `@eslint/eslintrc`, and it is not in the shipped image. `@eslint/eslintrc` only parses legacy `.eslintrc.yaml`/`.eslintrc.yml` files, and this repository has none. Linting uses the flat `frontend/eslint.config.js`, so no YAML is loaded at all. The existing `overrides` pin in `frontend/package.json` moves from `^5.2.3` to `^5.4.1`, so a regenerated lockfile cannot resolve back below the fix. The lockfile changes in one entry only, with nothing added or removed, and the shipped bundle does not change. Verified with eslint, typecheck, the production build, and the full frontend suite (4022 tests across 297 files). `npm audit` reports no `js-yaml` findings.
- **Bumped `brace-expansion` to 5.0.12 for three denial-of-service advisories** — Two high-severity issues, fixed in 5.0.10 and 5.0.11, let deeply nested brace groups exhaust the native stack. Roughly 3,100 levels of `{{{...a,b...}}}`, about 6 KB of input, crashed the process: once through the recursive comma splitter and once through the expander itself. The medium-severity third, fixed in 5.0.12, is the bash `{a},b}` quirk. The parser handles it by rewriting the string and rescanning once per trailing `}`, so the cost grows quadratically, and 128 KB of input blocked the event loop for 27 seconds. 5.0.12 makes the comma splitter iterative and caps nesting depth and rewrite passes at 1,000 each. Input past either cap is kept as plain text rather than throwing, the same way the existing `max` and `maxLength` limits work. **No running Bambuddy install was exposed, and none of the issues was reachable at build time either.** `brace-expansion` is a development-only transitive dependency, pulled in by `eslint` through `minimatch`, and it is not in the shipped image. The only patterns it ever expands are the fixed globs in `frontend/eslint.config.js`. Before the bump, the output of 5.0.9 and 5.0.12 was compared on every glob in that file plus ranges, nested sets, escaped braces and the `{a},b}` quirk, and it was identical. The same comparison confirmed the fixes: 5,000 levels of nesting overflow the stack on 5.0.9 and expand cleanly on 5.0.12, and a 20,000-brace rewrite input drops from 3 seconds to 13 ms. The existing `overrides` pin in `frontend/package.json` moves from `^5.0.9` to `^5.0.12`, because `minimatch` still asks for only `^5.0.2`. The lockfile changes in one entry only, `balanced-match` is untouched, nothing is added or removed, and the shipped bundle does not change. Verified with eslint, typecheck, the production build and the full frontend suite (4022 tests across 297 files). `npm audit` reports zero vulnerabilities with and without dev dependencies.


## [1.2.5.6] - 2026-09-24

### Added
- **Swedish (sv) is now a supported interface language (#3052, requested and contributed by @AntonPalmqvist in [PR #3062](https://github.com/maziggy/bambuddy/pull/3062))** — Adds `sv` as the fifteenth locale, listed as "Svenska" in the language picker. It arrives in parity with the reference locale rather than as a file to be finished afterwards: all 6302 leaves present, structure and key order matching `en.ts`, and every `{{placeholder}}` set intact, which is what the parity gate checks before a locale is allowed to ship. 156 of those leaves are identical to English, and each is enumerated by value in a 74-entry `SV_COGNATES` allow-list in `check-i18n-parity.mjs` — the same shape the other thirteen locales use, so the exemption is an enumerated translator decision rather than a blanket skip for the language. They are the strings with nothing in them to translate (`{{weight}}g`, `Hex: #{{hex}}`, `{{filament}} @ {{temp}}°C`), the product names Bambu and Orca ship untranslated, and the technical UI vocabulary Swedish takes verbatim from English — filament, status, extruder, timelapse, firmware, proxy, pipeline, diameter. Parity green at 6302 leaves across all 15 locales.

### Changed
- **The schema no longer contains a cycle that `metadata.sorted_tables` cannot sort** — `print_archives.library_file_id` → `library_files.folder_id` → `library_folders.archive_id` → back to `print_archives`: three nullable `SET NULL` links, each reasonable alone, that together made a loop SQLAlchemy answered with a sort it could not make and a warning on every backup and every restore. The order it returned could place a child before its parent, which is what once imported `library_files` ahead of `library_folders` and killed a restore on a foreign key violation — the restore has since stopped depending on that order by stripping every foreign key before importing and adding them back afterwards, but the backup export sorts the same way, and the warning ends with "may raise an error in a future release", which would break backup and restore on the same upgrade. One edge of the loop is now marked `use_alter`, which removes it from the sort graph without removing the constraint from the database: PostgreSQL emits it as `ALTER TABLE ... ADD CONSTRAINT`, as it already did for every constraint on those three tables, and SQLite — which reports no ALTER support — inlines it into `CREATE TABLE` exactly as before, so `ON DELETE SET NULL` keeps working on both. `use_alter` requires a name, so new databases carry `fk_library_folders_archive_id` where existing ones keep PostgreSQL's generated `library_folders_archive_id_fkey`; nothing refers to either by name. Pinned by a test that fails if a new foreign key closes a loop again, and by one asserting the key still exists on SQLite — if that inlining ever stopped, deleting an archive would leave a dangling `library_folders.archive_id` instead of nulling it, silently.
- **The MakerWorld integration is now a model-provider package, so a second model site is an implementation rather than a second copy of the feature ([PR #2845](https://github.com/maziggy/bambuddy/pull/2845) by @pascalheidmann)** — `services/makerworld.py` was a single 635-line module that owned everything from URL parsing to the presigned S3 download, and the routes called it by name, so Thingiverse or Printables would have meant a second route file beside the first. It is now an interface: a `ModelProvider` descriptor carrying identity, host patterns, the credentials it needs, its library folder, its permissions and its SSRF allowlists, plus a per-request `ProviderService` that does the transport — with MakerWorld as the first implementation and a registry that hands a pasted URL to whichever provider claims it. Nothing about the MakerWorld flow changes: the endpoints and their request and response shapes are unchanged, the new `source_type` field defaults to `makerworld` so existing callers send exactly what they sent before, and the transport moved verbatim — thirteen of the eighteen functions are byte-identical by AST comparison, including the CDN allowlist, the 200 MB download cap and the certifi-pinned TLS context that keeps S3 downloads working on Windows. Four things did change. Bambu Cloud credential storage moved out of `routes/cloud.py` into `services/bambu_cloud_credentials.py`, because a feature package that has to import a route module to read a stored token is a dependency pointing the wrong way; the cloud endpoints themselves did not move. An import naming a provider that is not registered is now refused before anything happens, where it used to create the destination folder on its way to failing. "Your Bambu sign-in expired" is now an explicit flag the provider sets rather than something inferred from whether an error message happened to be present, so a network failure or a rate limit can no longer be reported to you as an expired sign-in. And each request is authorised against the permission of the provider it actually named instead of MakerWorld's — latent while MakerWorld is the only one registered, wrong on the day it is not.
- **Every FTP session Bambuddy opens now records how it closed (#3009, reported by @grengojbo)** — the report traced a print completion that opened two FTP connections to the printer, deleted one file and then, as far as the log showed, did nothing else until the printer was powered off 21 minutes later, and concluded the connections were being left open. They were not: the post-print SD-card cleanup opens one connection per candidate filename and closes each in a `finally`, which a run against a real FTPS server confirms at the server end for both the delete and the 550 not-here case. The trouble is that nothing in the log could have said so. Neither the clean close nor the hard socket drop logged anything at any level, so a session closed properly and a socket genuinely abandoned produced the same output — none — and the only way to tell them apart was to read the source. Both now log one DEBUG line naming the printer, whether QUIT was acknowledged or the socket had to be dropped without it, why, and how long the session was held. Every connect in a debug log is now paired with a close, so the next person suspecting a leaked FTP connection can settle it from a support bundle rather than by inference. Nothing about the connection handling itself changed, and at default log level nothing new is printed. This does not explain the SD-card read/write error in that report or in #645; it only removes one theory from the list by making it checkable.

### Fixed
- **An AMS that reports no humidity percentage no longer shows the drop index as one (#3140, reported by @Sawtaytoes)** — Bambu sends two humidity fields that are not the same quantity: `humidity_raw` is relative humidity in percent, and `humidity` is the 1-5 drop index, which runs the other way — a high index means dry where a high percentage means wet. Bambuddy used the index whenever no percentage arrived, so a unit sending only the index rendered as "2%" in the green band while being the second-wettest of the five steps, charted an average of index values as a percentage, and could never cross a humidity alarm or auto-drying threshold, since no index reaches one. Such a unit now reports no humidity at all: the card hides the water-drop indicator, the history chart leaves a gap, and the alarm and auto-drying skip the unit instead of reading it as permanently bone dry. Temperature is recorded and alarmed on as before. No supported printer is known to be affected — the report came from an install running X1Plus, which Bambuddy does not support — and printers that send a percentage keep it, including two readings that previously fell through to the index because they would not parse as a whole number: one with a decimal point, and `38.0`. A unit that sends the index and no percentage now says so once in the log, with its firmware versions requested, so a supported printer that turns out to do this is visible rather than silently blank. Three smaller faults in the same paths went with it: a humidity of exactly 0% was stored as NULL when the firmware sent it as a number, a history window averaging exactly 0 reported no average at all while the minimum and maximum beside it reported 0, and a `humidity_raw` that was not a number at all aborted the whole recording pass for every printer, not just the one that sent it.
- **Two Bambuddy instances could not have their CA certificates trusted at the same time (#3014, reported by @Steven-Pierce)** — a slicer holding the CA of two Bambuddy installs failed to connect to one of them, with the same generic `code=-1` an install whose CA was never imported gives. Each CA worked on its own; together, one stopped. Every install signed its virtual printers with an authority named exactly `CN=Virtual Printer CA`, and a slicer's trust store is a flat list of certificates that OpenSSL resolves by subject name: it takes the first authority whose name matches the certificate in front of it and fails the chain when that authority turns out not to have signed it, rather than trying the next match. Whichever of the two landed second in the file therefore lost, decided by nothing more than the order they were appended in. A newly generated CA now carries a per-install suffix taken from its own key — `CN=Virtual Printer CA D55808BE` — and publishes that key identifier, which the printer certificate then points back at, so the two are told apart by name and each chain resolves to the authority that really signed it. Nothing has to be re-imported on upgrade: an install that already has a CA keeps it untouched, and the printer certificates signed by it keep exactly the shape they have today. The collision goes away as soon as one of the two CAs is newer than this release — a second install set up after upgrading, or an existing one whose `bbl_ca.crt` and `bbl_ca.key` are deleted from `virtual_printer/certs/` so a fresh CA is generated, which does mean importing that one into the slicer again.
- **ntfy per-event priorities were set, stored, and never sent (#3139, reported by @Thomansky)** — a per-event priority (#990) never reached ntfy: every notification arrived at the server's default, whatever the dialog showed. The two halves of the feature disagreed about the key. The dialog builds its rows from the provider's event toggles and stores the map under those names — `on_print_complete`, `on_print_failed` — while every sender is called with the bare event name, `print_complete`, so the lookup missed for all 18 events the dialog offers. It looked healthy from both ends: the stored config held exactly the priorities that were set, and the tests were green because they called the ntfy sender directly with the prefixed name, the one spelling the running system never produces. The lookup now accepts either spelling, so existing configurations keep working and nothing has to be migrated. The tests use the bare form, and one of them now runs from a finished print through to the outgoing request, which is the assertion that would have caught this. On upgrade, priorities that have been sitting in the database inertly start being honoured, so an event mapped to **Min** or **Low** will now arrive quieter than it did yesterday — that is the setting taking effect, not alerts going missing. The daily digest is unchanged and still goes out at the server default: it summarises several events at once, and the dialog offers no priority for it.
- **Restoring a backup into a different version of Bambuddy failed, and the failure took the live database with it** — A backup carries the schema of the install that made it, and the PostgreSQL restore path does not use that schema: it drops every table, recreates them from the running process's ORM, and inserts the backup's columns into the result. Any NOT NULL column the running version has and the backup does not then arrives with nothing to put in it, and a model-side `default=` cannot help, because SQLAlchemy applies one to ORM and Core inserts and never to the raw `text()` SQL this import builds — `create_all` emits no DDL default for it either. A backup made after `user_wallets.currency` was dropped in #3123, restored onto an install that still had the column, died on `null value in column "currency"` with the drop already committed: the restore's first transaction wipes the database, so the install was left with an empty schema, the previous data gone, and the MFA key file already replaced by the backup's — whatever had survived would have been encrypted under a key that no longer matched. The import now fills such a column from the model's default (evaluating a callable one), leaves a column with a server default to the database rather than second-guessing a timestamp it is better placed to produce, and ignores a nullable one exactly as before. A column that genuinely cannot be filled is refused **before anything is touched** — before services are paused, before the key file is written, before the first `DROP` — and the same applies to a `bambuddy.db` that is not a readable SQLite database at all, which previously was discovered only by the import that had already dropped the tables. Backups now carry a `manifest.json` naming the version that wrote them, so the refusal reads "this backup was made by X, this install runs Y" rather than a list of column names; a backup taken before the manifest existed restores exactly as it did, with the version simply unknown. The refusal is an HTTP 400, and the frontend was dropping its body on the floor — a refused restore is an `HTTPException`, so its `{detail}` is not the `{success, message}` a successful one returns, and the modal raised an empty error toast — so the reason now reaches the operator who has to act on it. A SQLite install is unaffected throughout: it restores by copying the backup's pages, schema included, and migrates forward afterwards.
- **Slicing a plate of many copies of one part could take the server down (#3135, reported by @TheUltimateC0der)** — the reporter sliced a plate of 25 small Gridfinity bins and Bambuddy was OOM-killed straight after the slice finished, taking the slice job with it. After every slice Bambuddy draws the plate thumbnail itself, because the slicer's command-line mode leaves it out, and it read the model with trimesh. trimesh mishandles the layout Bambu Studio and OrcaSlicer save projects in, where each copy is a reference into a shared model file: it read that file again for every reference and kept every copy of its triangles, so 25 copies of a part arrived as 625, and 25 bins of 10,000 triangles each became 6.4 million. Drawing that took 54 seconds and 8.4 GB, and it ran on the server's main loop, so the web UI and every printer connection stalled for as long. A project whose model file holds several parts had a second symptom: each placed part pulled in every other part from the same file, so its thumbnail drew parts in places they were never put. The plate is now read directly, each model file once and each part once however many times it is placed, and a large plate is simplified per part to a fixed triangle budget before its copies are laid out. The reporter's plate now renders in about 2.4 seconds at under 400 MB, and the heaviest real projects measured went from 48 seconds and 9.3 GB to 20 seconds and 0.8 GB. The thumbnail is drawn off the main loop, and a plate still too large after simplifying is left without one instead of risking the server.
- **Moving a queued job from "Any P2S" to one P2S threw away its filament colour (#3133, reported by @bgrr74)** — a job queued for any printer of a model can print in a different filament from the one it was sliced with: brown in the 3MF, Bone White on the spool. Editing that job and switching it to a specific printer of the same model reset the choice, and the job went back to brown. The print dialog cleared overrides whenever the target model changed, and "Specific Printer" empties the target model, so the switch counted as a change. Clearing would not have been the whole problem anyway: in specific-printer mode the dialog matched trays against the 3MF's colours, never sent the override, and left the old one on the queue item, where it contradicted the trays the job would actually use. Now the override is kept through the switch, and the chosen printer's trays are matched against the requested filament, so Bone White picks the Bone White spool, and a printer without one shows the usual colour-mismatch warning for Bone White instead of quietly settling on brown. The job keeps the override on the queue item, so if the dialog could not resolve every tray, the scheduler's match at dispatch looks for the same colour. Moving the job to a different printer model, or picking a different plate, still clears the override, as before. A printer's queue card and badge no longer hide a job assigned to that printer because its override colour is not loaded. That check is for picking among printers of a model, which a job for one printer has already done. The same goes for a virtual printer's force-colour jobs sent to a specific printer, which the card used to hide the same way even though the scheduler dispatched them. Saving a virtual-printer job in the print dialog now keeps the PLA-variant pin (Basic, Matte or Silk) its force-colour overrides carry. Editing one queued for any printer of a model used to strip it.
- **Asking for 25 copies across two printer models queued exactly one (#3101, reported by @Leander-Vh)** — the reporter sliced one project for two printer types, selected both files in the File Manager, set the count and pressed Print. One item printed, the queue was empty behind it, and the Batches tab held nothing. Two features had met badly. Cross-model alternatives (#671) put several sliced files behind one queue slot, and a multi-plate file (#342) moves the run count out of the modal's single Quantity field onto a stepper beside each plate. The cross-model submit reads the field, not the steppers — and on a multi-plate file that field is not rendered at all, so it stayed at its initial 1 with nothing on screen able to change it. The modal read "19 runs in total" directly above a button that queued one. Cross-model no longer borrows the per-plate steppers: such a job picks its plate per candidate, down in the alternatives list, so there is only ever one number to give and the ordinary Quantity field is back. The plate selector above it is gone in that mode for the same reason — its choice never reached the request. It only decided which plate the filament panel described, which is why picking plate 3 for a candidate while plate 1 stayed ticked above it produced overrides computed from a plate the job would not print; that panel now follows the first candidate's own plate. The backend needed nothing for the count itself — it has always created one item per copy and given each its own candidate rows, so the same request now produces 25 jobs, each free to land on whichever of the two models frees up first. It did need a name: a cross-model job carries neither an archive nor a library file, because the candidates are the files, so both branches that name a batch missed and the order the reporter went looking for would have appeared in the Batches tab as "Batch". It is now named after its first candidate, the same file the print dialog names the job after.
- **A print from Bambu Studio archived under the name `plate_1` instead of its own (#3126, reported by @alex-2000-ac-ghetto)** — the reporter's X2D archived Bambu Studio prints with no thumbnail, no filament total and no layer count, while the same project sent from OrcaSlicer archived in full. Two separate things were happening. The first is the known internal-storage limitation: Bambu Studio filed the sliced file on the printer's eMMC (`"url": "brtc://emmc/..."`), which FTPS on port 990 does not serve, and the X2D does this like the H2 series and the P2S. Bambuddy's bounded probe then found a file of exactly that name on the card and downloaded it — but it was an earlier slice of the same project, plate 4, while the running print was plate 1. The guard added in #1204 caught the contradiction and refused it, which is right: archiving plate 4's thumbnail, filament and cost against this print is the swap #2957 removed. What it did next was not. Having rejected the file, it asked `swap_plate_suffix` for a name with the correct plate number and blanked the print's name entirely whenever that came back `None` — but `None` covers a name that carries no `- Plate N` suffix at all, and such a name holds no stale plate number to be wrong about. So a single-plate project lost the name Bambuddy was holding and the row fell through to the gcode_file path, titled `plate_1`. #1204's own premise is consecutive plates *of the same model*, so the project part of a lagging name is right either way; it is now kept as the archive's title, and only a suffix that really does point at the wrong plate is rewritten. Kept as the title and nothing else, though: a name the guard has just watched fetch another plate's 3MF still gets disowned everywhere a file is looked up by name. That includes the `_active_prints` keys, and it matters — the cover endpoint downloads the running print's 3MF under that same name for a thumbnail and offers the bytes to the fallback-recovery path, which checks that a candidate is a readable 3MF but never which plate it holds. Registering the row under the rejected name would have let it be filled in with the exact file this branch had just discarded. The archive is still thumbnail-less — nothing can read that eMMC file — but it carries the print's name again. Separately, the Archives banner and the connection diagnostic named only "H2-series and P2S" as the models that do this, in all 14 languages; an X2D owner reading either was told the explanation did not apply to them. All three now name the X2D too.
- **Linking a tag another spool already carries gave an answer nothing could act on, and a duplicate broke the request outright (#3110, reported by @Niko11111)** — the built-in inventory refused with "Tag UID already linked to another active spool", naming nobody, although the route had just loaded the conflicting spool row and was holding it when it wrote that sentence. Spoolman mode did name the spool, but only inside a different English sentence. Same operation, two answers, neither machine-readable, so a client had to parse prose to learn which spool to look at — and could only do it in one of the two inventory modes. Both now raise one structured 409, `{"code": "tag_already_linked", "message": ..., "spool_id": N, "field": "tag_uid" | "tray_uuid"}`, the shape Bambuddy already answers `insufficient_filament` and `printer_connection_failed` with. The SpoolBuddy kiosk reads it: a refused link showed a flat "Failed to assign spool" and now names the spool holding the tag, so the operator can walk to that spool instead of rescanning one that cannot link. The other half was worse than untidy. Nothing stops two active spools from carrying one tag — neither column has a unique index, `PATCH /inventory/spools/{id}` writes both with no conflict check, and `POST /inventory/spools/bulk` copies a single payload, tag included, into every row it creates — and the conflict lookup read its result with `scalar_one_or_none()`, which raises when two rows come back. That exception escaped the route into the authentication middleware’s fail-closed handler, so the caller was told "Authentication service temporarily unavailable" for a request that had nothing to do with authentication. The lookup is now ordered and takes the first row, the way the by-tag lookup earlier in the same file always has, and a duplicate yields a 409 naming the lowest id.
- **"Clear RFID Tag" was permanently greyed out for a spool linked by its Bambu tray UUID (#3109, reported by @Niko11111)** — the button gated on `tag_uid` alone, and a spool linked by its 32-character tray UUID carries none: Bambuddy splits a stored tag by length, so a 32-char value becomes `tray_uuid` and `tag_uid` stays empty. In Spoolman mode that is every Bambu Lab spool synced from the AMS — on the reporter's instance, 35 of the 39 tagged spools, not one of which could have its tag cleared from the dialog. Everything around the button already treated those spools as tagged: the Tag ID column renders whichever identifier is present, and the payload the button sends clears both fields. Only the one condition disagreed. Either identifier now enables it, and clearing still removes both. The documented workaround — editing `extra.tag` in Spoolman's own interface — is no longer needed.
- **Assigning a spool to a slot holding a non-Bambu filament configured nothing, and could delete the assignment afterwards (#3084, reported by @anthonyma94; #3100, reported by @Sawtaytoes)** — swap a Bambu spool for one the AMS cannot read and Assign Spool published no `ams_filament_setting` at all: the printer kept showing `?` on its own screen and in the slicer, and only Configure, which publishes unconditionally, put anything there. Three backend decisions were reading the tray's `state` field to answer "is there a spool in this slot", and `state` cannot carry that. It is firmware-variant — the A1 Mini BMCU and the P1S Standard AMS report 3 for a loaded slot and never emit 11, and an AMS-HT reports a *loaded* tray as 9 because it does not feed into a shared buffer (#2594) — and it is also partly Bambuddy's own writing: the empty-slot cleanup stamps `state = 9` on every slot whose `tray_exist_bits` bit is 0, and when the bit comes back it refreshes only the `exists` annotation beside it. Either way a slot the firmware said was full sat in the cache reading `exists=True, state=9` until something configured it, and the deferred configuration that is supposed to rescue a pre-assigned slot could not fire either, because its own "has a spool appeared" test was the same 9. That is the deadlock removed from the assign path in #1322, still in place one step further along. The same 9 is what deleted the assignments in #3100: the replay never fired, so the row kept the empty fingerprint it was stored with, and the first tray report that named a filament was read as a spool swap and unlinked. Every one of the three now reads `tray_exist_bits` first, which is the bitmask firmware actually answers this question with and the one the printer card has drawn its `?` from since #2527; `state` remains the fallback for the external spool and anything else whose payload carries no presence bit. A blank tray report from a slot the bit calls occupied no longer unlinks anything either — off a print as well as during one — because a filament the AMS cannot identify is not a filament that was removed.
- **The Finance page showed euros whatever currency the install was set to (#3123)** — it was the only surface in Bambuddy that read its currency from a data row (`user_wallets.currency`) rather than the `currency` setting, and it fell back to EUR where every other page falls back to USD. One variable drives every amount on that page, so the personal balance, the cost-center budgets and the whole transaction list were all wrong together. The backend was the other half of it: of the four places that settle on a currency, three wrote a hardcoded `"EUR"` — the wallet the API mints on demand, the wallet a print charge mints when none exists, and the balance returned for a user with no wallet row at all. The page now takes the configured currency from `/settings/ui-flags`, which is readable by anyone who can see Finance, and the API reports the setting. The `user_wallets.currency` column is gone altogether — an install has one currency and nothing here converts between them, so a per-wallet copy could only ever drift from the setting; a startup migration drops it from existing databases on both SQLite and PostgreSQL. Saving settings now also refreshes those flags, which nothing invalidated before.
- **On Windows and macOS the Virtual Printer's bind dropdown offered one entry per network adapter, not one per IP address (#3121, reported by @SJB-OLVG)** — each enabled virtual printer needs its own address, and the documented way to get several is to add secondary IPs to the adapter you already have. Linux reads those back through `ip -j addr show`, which reports every address; Windows and macOS have no `ip` command and fell through to an enumeration that stopped at the first IPv4 of each adapter. A Windows host with three addresses on one NIC therefore offered exactly one bind target, and creating a second virtual printer could only fail with "Bind IP ... is already in use". Every address is now listed on those platforms too, with the ones after an adapter's first marked as aliases exactly as on Linux. A Linux host without `iproute2` installed gains the same thing, having previously been limited to one address per interface for the same reason. The wiki gained the Windows instructions for adding those addresses, which it had for every other platform but that one, and the creation steps it describes now match the dialog — bind interface, model and access code are set on the printer's card after **Create**, not in the dialog itself.
- **A macOS native install could silently lose all access to the printer after a system or Homebrew update (#3114, reported by @TheeBobbyDonuts)** — macOS grants Local Network permission to a code signature, and judges a launchd-spawned process on its own rather than letting it inherit the grant of the Terminal that started it. Homebrew ships Python unsigned on Intel, so there was no identity for that grant to attach to: every connection to the printer was dropped with no error Bambuddy could log and no permission prompt to answer. The web interface worked, the printer showed as disconnected, all three port checks reported unreachable while the subnet check passed, and the log recorded no MQTT attempt at all — not a failure, just silence. Toggling the Python entry in Privacy & Security did nothing, because the entry referred to an identity that no longer resolved. `install.sh` now ad-hoc signs the interpreter during a macOS install, and `install/update_macos.sh` re-checks it on every update, since `brew upgrade python` lays down a fresh unsigned binary under a new versioned path. Both sign only what is currently unsigned: on Apple Silicon the linker already ad-hoc signs every binary, and re-signing one would rotate the hash its identity is built from and revoke a working grant on each update. The connection diagnostic also gained a **macOS Local Network permission** check, which reports the missing signature where there is one, and otherwise points at System Settings — where an Apple Silicon machine, whose identity changes with every Python upgrade, can re-grant it.
- **The Library bulk add-to-queue answered 200 for a call that queued nothing, and queued items nothing could dispatch (#3112, reported by @toxxicpickles)** — `POST /api/v1/library/files/add-to-queue` reported every per-file rejection in an `errors` array and returned `200` regardless, so a caller that checked the status code saw a successful request, no visible failure, and no queue item. That is now a `400` when nothing at all was added, with the same per-file reasons in the body; a call that created some items still succeeds, because it did. The items it created were also aimed at nothing: the route always wrote them with no printer and no target model, and the scheduler dispatches on one or the other, so those rows could never be picked up by anything and sat in Unassigned until someone opened each one and assigned it by hand. The request now takes an optional `printer_id` or `target_model` for the batch, and with neither it aims each file at the model its own G-code declares — when a printer of that model is active, since aiming a job at hardware nobody owns would only look like progress. Three gates `POST /api/v1/queue/` has applied for a while now apply here too, because an item reaching the scheduler through this route has to be as printable as one reaching it through that one: the cross-model check that stops a file sliced for one printer being dispatched to another, the filename check that would otherwise surface as a failed upload hours later, and the filament requirements the scheduler matches before handing a model-based item to hardware. This endpoint has no caller inside Bambuddy — the Library's own Print action goes through the queue API with a printer already chosen — which is how it came to drift this far from it.
- **The connection diagnostic told anyone whose LAN was not a /24 that their printer was on a different network (#3092, reported by @cwawak)** — the reporter's LAN is `192.168.96.0/22`, his Bambuddy sits at `192.168.96.9` and his printer at `192.168.98.170`, four hundred addresses inside the same subnet. The *Network subnet* check warned that the two were on different networks and told him to go configure routing between two halves of one LAN. An IPv4 address does not carry its prefix, and the check supplied `/24` for both sides — the most common LAN, and not the only one. It now reads the prefix off the interface that owns the address, so a `/22`, a `/16` and a `/25` are each read as written, and when no local interface claims the address the check is skipped rather than asserting a split it cannot see. The same check also picked which of Bambuddy's own addresses to compare by probing a route toward `10.255.255.255`, which on any host with more than one network card is not the card the printer is on; it now asks for the route toward the printer itself. On a two-NIC host that alone was enough to warn about a printer sitting on the second card's own subnet.
- **Podman and LXC installs were told they were not running in a container at all (#3092, reported by @cwawak)** — the *Docker network mode* check said "Not running in Docker — not applicable" to a Bambuddy inside a Podman container, which reads as "you are on bare metal" and sends people looking for the problem somewhere else. Podman runs Bambuddy in exactly the same two shapes Docker does, and the shape is what breaks printer discovery and the Virtual Printer. The check is now **Container network mode**: it names the engine — Docker, Podman, Kubernetes, containerd — and reports host or bridge networking for each of them. Detection of the mode itself gained the general form of the signal it always used: a container that can see an interface created in its own network namespace, rather than only one end of a veth pair, is sharing the host's. A container whose mode genuinely cannot be read now says so and suggests host networking if discovery is failing, instead of guessing "bridge" and telling a perfectly healthy install to recreate itself. An LXC or LXD system container is named too, and told that the question does not apply to it — it sits on the LAN like a small virtual machine, so there is no network mode to recommend. The support bundle now carries the engine name beside the Docker flag for the same reason. Discovery's own Docker detection is deliberately untouched: it switches the Add Printer flow from SSDP to subnet scanning, and SSDP works for a host-networked Podman container.
- **SpoolBuddy said "Unknown color" for spools Bambuddy names perfectly well (#3090, reported by @Sawtaytoes)** — the reporter scanned a Bambu Lab PLA Silk+ spool that his inventory card calls Candy Red and the kiosk showed the right red swatch above the words "Unknown color". The name was never in the spool record: Bambu's RFID tags often carry none, so Bambuddy has always resolved the swatch's own hex against the colour catalog instead — and the kiosk was printing the empty column. Every screen in SpoolBuddy that shows a colour now resolves it the same way the rest of Bambuddy does, which also stops the ones that had a name on file from showing Bambu's internal code ("A06-D0") in place of it. Searching the inventory by a colour you can read on screen finds it now, in the kiosk and in Bambuddy, instead of matching only what was stored. On Spoolman-backed inventory the catalog also wins over the spool's subtype, which Spoolman installs were being shown as a colour name because Spoolman has no field for one — so those spools said "Silk+" where they now say Candy Red. The label the kiosk falls back to when nothing can name a colour is translated in all 14 languages rather than being English for everyone.
- **An external RTSP camera could pass the connection test and still show a black live view (#3082, reported by @M1XZG)** — the reporter's Wyze cam, republished through go2rtc, captured a frame for the test button and played in VLC, but the live view produced no image and ended after a few seconds. The two RTSP paths were not asking ffmpeg for the same thing: the one-shot capture used ffmpeg's own probe defaults, while the live stream hard-coded a 32-byte probe with no analysis. That is enough for a camera that describes itself in its SDP, and not enough for one that sends its H.264 parameters in-band a moment later — ffmpeg then never starts a decoder and yields nothing at all. The live stream now probes on the defaults like the capture beside it, so the test button means what it appears to mean. The low-latency settings are unchanged, and so is the camera handling for Bambu's own printers, which is tuned per model against a camera we know.
- **The jog API pushed an A1's nozzle at the plate when asked for clearance (#1334, reported by @AQU4R1U5)** — `POST /printers/{id}/bed-jog` takes a signed nozzle-bed gap: positive asks for more room between the nozzle and the plate. The reporter sent `distance=5` to his A1 and the toolhead came down instead. The endpoint had been flipping the sign on A1 models since the original report on this issue, where an A1 Mini owner clicked an arrow labelled "move the plate up" and watched the nozzle dive — but that flip was solving a labelling problem in the transport layer, and it turned a parameter documented as model-independent into one that meant the opposite thing on a quarter of the fleet. `Z` is the nozzle-to-bed distance on every Bambu model, whether the bed drops away from a fixed nozzle or the nozzle rises off a fixed bed, so the endpoint now sends `distance` through unchanged and one call means one physical outcome everywhere: positive is the safe direction on every printer. The arrows on the printer card are unchanged and still show you what you would expect to move — the card works out which gap change its own arrows stand for, which is where a question about the machine in front of you belongs. On an A1, A1 Mini or A2L those buttons now say *toolhead* rather than *plate*, since a bed-slinger's plate does not move in Z at all. **A2L owners had none of this**: the original fix listed the A1 models by name and the A2L, which slings its bed the same way, was never on the list — its up arrow has been sending the toolhead down since the machine was supported.
- **A queue item pinned to one printer never said why it was waiting (#3074, reported by @Sawtaytoes)** — the reporter watched a job pinned to a specific X1C sit at Pending for fourteen minutes, with nothing in the UI or the API to say why, while that printer ran a print he had started from its own screen. The same job queued as "Any X1C" explains itself, because the model-based half of the scheduler builds a sentence for every way a job could not start and puts it on the row. The pinned half never wrote that field at all: the Home Assistant sensor interlock was its only writer, and it actively cleared the field whenever no sensor was holding the printer. Pinned items now say what they are waiting on in the same words — **Busy: X1C-01** while it prints, while it dries, or while another job on that printer goes first; **Offline, no Auto On smart plug: X1C-01** when nothing can switch it back on — and the row shows the purple **Waiting** badge instead of a silent Pending. "Finished, waiting for you to confirm the plate is clear" is split out from plain busy and named as itself, because it is the one case on that list that does not resolve on its own. A printer that is simply printing still sends no notification, exactly as before, and neither does a sensor interlock; only the cases that need you to go and do something do. On the queue timeline, a job that is merely next in line still draws its forecast bar as before, while one that is waiting for you now drops off it rather than promising a start time nobody can keep. Nothing about which job goes out, or when, has changed.
- **A plate printed entirely from the external spool stalled at preheat and failed (#3087, reported by @Notaseraf)** — the reporter's P1S heated up, sat there for ten minutes and then paused with HMS 07FF_8012, "Failed to get AMS mapping table". Resuming just reheated it; prints that used the AMS were fine. The plate was a single filament out of a seven-filament MakerWorld project, mapped by hand to the external spool. A project's filaments are numbered across the whole project, so a plate that prints only the seventh one carries six placeholder entries in front of it — the same shape BambuStudio sends. Bambuddy read that as "nothing here is on the spool holder" and told the printer to use the AMS anyway, with a mapping that pointed at no tray at all, which is precisely the mapping table the firmware then could not find. A plate whose every printed filament sits on the external spool now dispatches with the AMS switched off, so it prints. The decision is made against the plate's own filament list rather than guessed from the mapping alone, because a placeholder entry and a filament that could not be matched to any tray look identical in the mapping, and sending the second one to the spool holder would silently print it in the wrong material (#2589). A plate that mixes the spool holder with an AMS tray, or that has a filament which matched nothing, is untouched and still behaves exactly as before, as are dual-nozzle printers — on those the same switch selects which nozzle to feed rather than whether to use the AMS.
- **A printer that had been offline for hours could stop the whole server (#3068, reported by @bazza2000)** — the reporter's A1 had been unreachable for 38 hours but still answered on its MQTT port, which is exactly the case the connection watchdog exists for: rebuild the session with a fresh client so nothing left over from the dead one can replay onto the new print. The rebuild ended in a call that waits for the old connection's network thread to finish, and that thread was stuck part-way through a TLS handshake the printer never completed, where nothing can interrupt it. The wait had no limit and it ran on the thread that serves every request, so Bambuddy stopped answering — the web UI, the API and the health check alike — while the process itself stayed up, which is why Docker's restart policy never kicked in. Retiring an old connection no longer waits for it: the replacement is built immediately and the old one is shut down in the background, cut off from the new session first so a printer that eventually answers cannot report itself connected again after being replaced. The same wait sat on three other printer paths — the queue's dispatch recovery, the staleness check behind an ordinary status poll, and editing, deleting or disconnecting a printer — and on the shutdown of the MQTT relay and smart-plug connections, where a wedged broker kept the process from exiting at all. All of them are fixed together. A connection that takes more than a few seconds to shut down now says so in the log instead of silently taking the server with it.
- **Auto-drying skipped every composite spool (#3067, reported by @TheUltimateC0der)** — the reporter's AMS-HT would not dry PA6-CF, and drying the same spool by hand worked. The scheduler reduced a tray to a preset key by splitting on spaces only, so "PA6-CF" stayed "PA6-CF", matched none of the eight rows the preset table has, and the tray was read as holding nothing worth drying. It was never only nylon: of the 41 types a printer can report, 33 had no row under that rule, and 20 of those — every -CF, -GF and -AERO variant of PLA, PETG, ABS, ASA, PC and PA — have a base material sitting right there. The drying popover has resolved these correctly since 1.2.5, which is exactly why doing it by hand worked; the scheduler now shares that rule, including the alias map that reads PA6, PA11, PA12, PAHT, PPA and Nylon as PA. A row you have added for the exact type still wins over the base material's, and a material whose base is not in the table either is still left alone rather than dried at a temperature nobody chose. The same lookup decides per-filament humidity thresholds and the chamber preheat target, so a composite now gets the override and the preheat that were set for its material too.
- **An archive gave up on its 3MF for good after one slow transfer (#3063, reported by @dfrysinger)** — the reporter's P1S had the file on its card and was serving it; the 19 MB transfer just did not finish inside the budget while the printer was also running its camera, its status messages and the job upload. Bambuddy wrote an empty archive and never looked again — and then downloaded that same file successfully three times in the next two minutes, throwing each copy away, because the only code that would have attached one had already run. Recovery for a fallback archive existed but was armed for exactly one give-up, the FTPS cool-off. It now also covers a transfer that ran out of time: Bambuddy comes back after one, four and ten minutes and fills the row in where an attempt lands. The two are told apart by what the printer said — a file that genuinely is not on the card is answered with 550, and that answer does not improve with waiting, so nothing is scheduled for it. Nor for a 3MF that downloaded fine but turned out to be another plate's, where retrying would put back exactly what was just discarded. The archives banner has wording for this case too, because the old text sent an owner whose card was working to switch on a setting that was already on; it names the Connection Timeout setting instead.
- **Items Printed could not be set to 0 after a total plate failure (#3051, reported by @tdavis75)** — a jam ruined everything on the plate while the printer reported the job a success, so the honest count of usable parts was zero; the field refused to go below one. The manual quantity override is what the documentation points at for exactly this correction, and a project's completed-items count sums that column, so there was no way to tell a project that a job produced nothing. The floor was in the edit dialog alone — the API had always stored whatever it was given, which also meant a negative count was accepted and would have subtracted from the project totals. Zero is now typeable and the column is bounded at zero, and the Filament Trends widget counts a zeroed archive as no prints rather than silently reading the 0 as "unset" and charging one.
- **Bulk edit could not turn G-code injection on or off (#3058)** — every other per-item print option in the queue can be changed for a whole selection at once, but **Inject G-code** was only ever settable one item at a time, in the item's own edit dialog. The bulk dialog simply had no control for it, which on a queue of a few dozen jobs meant opening every single one to arm the start and end snippets an auto-print system needs — the thing bulk edit exists to avoid. It is now a tri-state next to **Auto power off after print**, unchanged by default like the rest, and it appears only once a G-code snippet has actually been saved for some printer model, matching the checkbox in the print dialog. Nothing changed on the server: the bulk endpoint has always accepted the field, so this was a missing control rather than a missing capability.
- **AMS Filament Backup switched itself off with every print started from the queue (#3040, reported by @frnzzle)** — it never actually did: the printer had auto-refill on the whole time, and Bambuddy was reading its own request back as telemetry. Every `project_file` Bambuddy sent carried `"cfg": "0"`, a field Bambu Studio has never sent and the firmware ignores, but the printer echoes a command's fields back in its acknowledgement — and `cfg` is the device-config bitmask whose bit 18 is auto-refill. The acknowledgement was ingested as though it were a status frame, so 25 ms after every dispatch the badge flipped to off. On a P2S, H2C or X2D it flickered back a second later, because those repeat `cfg` in their periodic status; the P1S, A1, A1 Mini and A2L send it only in a full status dump, which arrives on connect and on Force Refresh and otherwise not at all, so there the wrong value stood until someone toggled it by hand. That mattered beyond the badge: the "prefer lowest remaining" sort is deliberately skipped while the printer reports backup off, since without a second spool to fall back on, feeding a print from the emptiest one risks running dry mid-job — which is why near-empty spools were being left untouched, the symptom that opened the report. On the A1 family it was worse still: they report no `cfg` at all, and the state is meant to stay "unknown" so that behaviour is left exactly as it was before the feature existed; the echo turned that into a definite "off" on the first queue print. Command acknowledgements are no longer read as status — for the backup bit or for the per-job timelapse flag they also echo — and the `cfg` field is gone from the print command, which is not a place to be writing printer settings from.
- **K values missing on a second AMS, and its slots unconfigurable (#3044, reported by @Zib-Astian)** — an X2D with two AMS 2 Pro, one per hotend, showed K on every slot of the first and nothing on any slot of the second. Configure Slot was worse than blank there: the picker offered no matching profile, the slot read as though it had none bound, and choosing one changed nothing visible. Both came from the same rule. A calibration index can mean two different profiles on a dual-nozzle printer — on the maintainer's H2C, index 16 is the left hotend's black PLA at K=0.018 and 15 is the right's at K=0.020 — so Bambuddy resolves it against the slot's own hotend and shows nothing rather than the wrong number. But a printer does not always file one profile per hotend. This one files one per filament, so the second AMS's slots point at the same entries as the first, all tagged with a single extruder, and requiring a match found nothing at all. The hotend now has to actually appear in the table the printer sent before it is used to narrow anything; where it does not, the index stands on its own, which is what BambuStudio does for the same card. Printers that do file per hotend are unaffected — the wrong-nozzle number still cannot be shown, and the other hotend's profiles stay under **Other K profiles**. Also fixed alongside it: on a dual-nozzle printer the K-profile dropdown named the hotend twice on every matching option and three times on every other one.
- **The Timeline ignored Shortest Job First (#3043)** — turning SJF on reordered the pending list and the scheduler itself, but the Timeline tab kept drawing the queue in its pre-SJF order, indefinitely. It chained each swimlane's bars by queue position alone and was never told the setting existed, so the one view whose entire job is to say *when* each print will run was the one view answering for an order the scheduler had no intention of using. Bars now chain in the scheduler's own order — jumped items first, then shortest print time, then position — and the starvation guard is visible there too, so a long print that has finally come up shows as such instead of staying buried. All three surfaces that claim to show queue order (the pending list, the "if started now" ETA, and the Timeline) now share one comparator rather than three hand-copied ones. Along the way the pending list stopped folding a model name down to its first letter when grouping lanes, which had been interleaving *Any X1C* with *Any X2D* (and *Any P1S* with *Any P1P*) into a single run of rows.
- **Preheat & Heat Soak delayed PLA prints by minutes with nothing to preheat for (#3041)** — with the feature on, a queued PLA print sat for five to seven minutes before the file was even uploaded, and turning the feature off started it immediately. The per-filament map does what it says and gives PLA a chamber target of 0, and the chamber phase duly skipped — but the stage then heated the bed to the print's own temperature, waited for it, and held the full soak anyway, because the soak had no idea it was holding for a chamber that was never asked for. That is pure delay: the print's G-code sets the bed the moment it starts, so preheating it here only moved the warm-up ahead of the upload instead of overlapping with it, and there was no chamber to condition. A chamber target of 0 derived from the filament map now skips the whole stage, so PLA, PETG, TPU and PVA prints dispatch straight away with the feature left on. The one thing the skip still does is put the airduct flap back to cooling, which is a single command and no wait — an H2D left in heating mode by the ABS job before it would otherwise cook the PLA that follows. Explicit instructions are untouched: a chamber target of **0** typed into a print's own override still heats the bed and runs the soak, which is what the queue documentation has always promised it does, as does forcing a print's Preheat override to **On**. Prints that genuinely want chamber heat are unaffected, including on the P1S/P1P/A1 tier where the bed and the soak timer are the whole mechanism.
- **Server-side slicing rejected MakerWorld 3MFs over filament-index fields, and the plate preview was never sanitised at all (#3030, reported by @kielsucks)** — Bambu Studio writes `0` into `wall_filament`, `sparse_infill_filament` and `solid_infill_filament` to mean "use whichever filament the object is set to". Bambu Studio and OrcaSlicer 2.4 both accept that; OrcaSlicer 2.3 and earlier counted these from 1 and reject it outright with `wall_filament: 0 not in range [1.000000,...]`, so a sidecar pinned to one of those images refused the file before it ever looked at the profiles Bambuddy supplied. This is the same shape as the `-1` inherit markers fixed in #1201, with a different marker value, so the sanitiser's allowlist is now a key-to-marker map rather than one global constant — a `-1` on a filament index is a real value and is left alone, as is a `0` on a raft field. The key is removed rather than rewritten, which is what makes it safe on every build: the slicer then falls back to its own default, which is the same `0` on the versions where `0` was legal and `1` on the older ones, which is what "the active filament" means there. Fixed alongside, and the more consequential half: **the plate preview never ran the sanitiser**, so a file that sliced fine could still fail the automatic preview and fall back to a guessed filament list — and it matters more there than in a real slice, because the preview deliberately runs on the file's own embedded settings and so has no `--load-settings` pass that could supply a replacement for a rejected field. Both paths now share one sanitiser.
- **The Slice action offered Bambu Studio files its URI handler cannot load (#3029)** — "Open in Slicer" was offered for `.stl`, `.step` and `.stp` as well as `.3mf`, on the reasonable assumption that a slicer which opens an STL from its own File menu will open one from a link. Bambu Studio does not. Every `bambustudio://` and `bambustudioopen://` URL goes through one import path that refuses any filename which is not `.3mf`, and it refuses it *before* fetching anything — the user gets "Download failed, unknown file format", which names the format and so reads as a broken model rather than an unsupported handoff. OrcaSlicer has no such limit: only MakerWorld links go down its equivalent path, and a link to your own Bambuddy goes to its general downloader, which does not look at the extension at all. So the action is now offered per slicer. With **Open in Slicer** set to Bambu Studio the File Manager offers Slice on 3MF only; set it to OrcaSlicer and STL, STEP and STP come back. In the 3D preview, where both slicers are reachable from one split button, a file the configured slicer cannot take is offered to the other one instead, with the button naming it rather than quietly sending the file somewhere the setting did not ask for. None of this touches the in-app slicer: with **Use Slicer API** on, Slice goes to the sidecar and still takes STL and 3MF whichever desktop slicer is configured.
- **"Slice" handed the slicer a download link that only worked once (#3029)** — the Slice action in the File Manager, and Open in Slicer on the Archives page, mint a short-lived token and put it in the URL, because a protocol handler cannot carry an `Authorization` header. That token was spent by the first request to reach the endpoint, which made the handoff depend on the slicer fetching the URL exactly once — and nothing guarantees that. Bambu Studio's own downloader retries three times after a failed attempt, transfers get resumed, on-access scanners fetch. Whichever request arrived first won and every later one got a 403, so the slicer opened on an error about the file instead of on the file, and the message it showed described the 403 body it had been handed rather than anything wrong with the model — which made this very hard to read from the user's side. The three protocol-handler downloads — a library file, an archive's sliced 3MF, an archive's source 3MF — now accept their token for the rest of its five-minute life. Nothing else about it changed: it is still bound to the single file it was minted for, still expires in five minutes, and is still refused everywhere else. The two downloads that are not handoffs stay single-use, because what they hand over is itself consumed — a prepared printer-file bundle is deleted the moment it has been streamed. Fixed on the way through: **Open source 3MF in slicer never worked at all with authentication enabled**. The gateway that lets these token-in-URL downloads past the login check matches the path fragment `/dl/`, and the source 3MF's route says `source-dl`, which does not contain it — so the slicer's header-less request was turned away as unauthenticated before the route's own token check ever ran. It failed on every install with auth on, and only there.
- **`camera:view` was required to see any image in the app (#3025, reported by @lonix)** — thirteen routes that have nothing to do with a camera took the camera stream token as their credential: library and archive thumbnails, plate previews and plate thumbnails, timelapses, print photos, archive QR codes, project cover images, print-log thumbnails, printer cover images and external-link icons. A browser cannot put an `Authorization` header on an `<img src>`, so those routes need a credential that fits in the URL, and the camera token was the only one there was. But the only way to mint one is `camera:view`, so a user granted library access to their own files got a grid of broken images until they were also granted the live camera — which on a home install points at the room the printer is in, and is not something you hand to a commission client so their own thumbnails will load. Those routes now take a new media token, minted by `POST /auth/media-token` behind plain authentication and carrying the identity of whoever asked, so each of them applies the permission its own resource is governed by: `library:read_own` for a library thumbnail, `projects:read` for a project cover, `external_links:read` for a sidebar icon. The camera stream token keeps the three routes it was named for. The frontend fetches a media token for every signed-in user and asks for a camera token only when the user can actually mint one, which also stops the 403 that used to fire on every page load for everyone else. Fixed on the way through: the printer file-browser's plate thumbnails, which had no query-token support at all and so 401'd in the file manager whenever auth was enabled; and the project cover image in the edit dialog, whose cache-busting `?v=` was appended after the token and corrupted it.

  **Upgrade note:** a long-lived `camera_stream`, `camwall` or `overlay` token is no longer accepted on those thirteen routes — the split is the point of the change, and those tokens are handed to kiosks, walls and Home Assistant to display video. The cam wall, the streaming overlay and the kiosk views use only the three camera routes and are unaffected. If you have an integration pulling a thumbnail or a cover image with a pasted camera token, it should authenticate with an API key instead: the media routes accept `X-API-Key` and `Authorization: Bearer` directly, which the camera-token-only versions did not.
- **The Finance sidebar entry was hidden from every non-admin, whatever their permissions (#3023, reported by @lonix)** — `cost_centers:read_own` exists so a user can see their own wallet, balance and cost-centre spend, and the page itself always worked if you typed the URL. The sidebar hid it anyway. It decides whether to offer Finance by reading `billing_enabled` from `GET /settings`, which requires `settings:read`; a non-admin gets 403 there, so the value arrived undefined and the entry was suppressed for exactly the people the permission was written for. The shell read three more fields from that same 403, and one of them failed the other way: the Notifications gate tests for `false`, which an undefined value never is, so an administrator who switched user notifications **off** still left the entry showing to the non-admins it governs — a fault no administrator could reproduce, because administrators can read `/settings`. The sponsor prompt also showed EUR regardless of the configured currency, and the update check ran on installs where it had been turned off. `settings:read` cannot be the price of any of this: it also grants sight of the SMTP, LDAP and MQTT credentials. These four now come from a new `GET /settings/ui-flags`, which asks only that the caller be signed in. It is deliberately not more fields on the existing public `/settings/ui-preferences`: that endpoint is served to anyone at all because its contents are defaults shipped with the app, while these describe how your particular install is configured, so they sit behind authentication instead.
- **A queued print showed "ASAP" in the queue even when Queue was the option chosen (#3018, reported by @kilrah; also #2557, reported by @ddavidebor)** — the Print dialog offers ASAP, Queue and Schedule, but ASAP and Queue differ only in where the item lands in the list, and neither is recorded on the item itself. The queue's time column had nothing to read but the scheduled time, so it labelled every unscheduled item "ASAP" — the name of the one mode the user may well not have picked. Someone who chose Queue, watched the row appear as ASAP and then watched it start, reasonably concluded Bambuddy had overridden them. That column answers when an item runs, so it now says that: **When a printer is free**, in all fourteen languages. The dispatch itself was correct and is unchanged — a print scheduled for later does not reserve the printer until then, so an unscheduled item behind it uses the printer in the meantime rather than leaving it idle until the scheduled time. The queue's own per-printer log line was no help in telling those apart either: it called a printer "not available" whether the queue could not use it or had just picked it for this pass, and printed printer state read at the moment of logging rather than the state the decision was made on — so a support bundle could show "printer 1 not available — state=IDLE" immediately above that printer receiving a job. Each printer now reports which of the two it was, and why.
- **An archive left empty by a printer refusing FTPS blamed the slicer (#2780, reported by @AntonPalmqvist)** — when a printer's file service answers port 990 with something that is not TLS, Bambuddy pauses transfers to it and the print in flight is archived with its name and timing only. That cause has been recorded on the archive since #2957, but the Archives banner was never taught about it: it ranked the three causes it knew, found none of them, and fell back to the original wording — the slicer did not leave the file on the card, go and switch on "Store sent files on external storage", here is a link to installation step 4. Every part of that is wrong for a refused handshake. The slicer did write the file, the reporter could see it on the stick from his own computer, the setting was already on, and there is nothing on his side to change. Worse, the banner dismisses one-shot into browser storage, so being shown the wrong explanation once meant never being shown the right one. It now has its own wording, in all fourteen languages, saying that the printer refused the connection, that this is not a slicer setting and not something the operator did, that Bambuddy comes back for the file after the five-minute pause so a brief episode fills itself in, and that a card still empty means the refusal outlasted the retry. It links to the troubleshooting entry for the handshake failure rather than to the installation guide. This cause now outranks the other three rather than falling to the bottom: the other three describe an install working as configured and each ends in something the operator can change, while this one reports a fault we cannot yet explain — and given the one-shot dismissal, ranking it below anything else would have hidden it permanently. It cannot mask a permanent cause in return, because the retry clears the marker when it succeeds, so a card still carrying this one is a printer whose file service is still refusing. The wiki page these reports are pointed at has also been corrected: it told people to power-cycle the printer, which the reporter who prompted that advice did on both of his printers to no effect, and which the code stopped saying for that reason. It now states what has been measured, says plainly that the trigger is unknown, and names the one log line worth collecting.
- **Custom filament profiles arrived in the slicer as Generic, or as the Bambu profile they were built on (#3003, reported by @marivo)** — the slot's filament id is the one field a custom profile travels in, and it holds eight characters on the printer. Bambuddy was putting an eighteen-character preset identifier in it whenever it could not find a real filament id. The printer stored the first eight and reported success, so the slot pointed at something that resolves nowhere: the slicer showed Generic and the printer's calibration table, keyed by the same field, no longer had a slot to key. Three printers in the support archive show it happening — an A1, a P1S and an H2D — so it was never specific to one model. Bambuddy now sends the slot's existing filament id, or the generic one for the material, both of which fit. Orca Cloud profiles were additionally never looked up at all, so theirs went in as a thirty-six-character identifier and fared worse still; they are now resolved like every other source. Also fixed on the way through: a failed Orca Cloud sign-in left its HTTP connection behind instead of closing it, which went unnoticed while only the settings page could trigger it and would have repeated on every spool assignment once the lookup above started using the same code. A profile that carries no filament id of its own — which is every profile created in OrcaSlicer, whose preset format has no such field — still cannot be told apart from the one it inherits from.
- **Hovering a muted control in the light theme made its label vanish (#1909, reported by @AntonPalmqvist)** — the tab strip on the Print Queue page was where it got noticed: point at **Batches** and the word turned white on a near-white background. It was never about that tab. The light theme keeps `text-white` readable by remapping it to the theme's foreground colour, but that remapping only ever matched the plain utility, not the `hover:` variant Tailwind compiles to a different selector — so roughly 400 controls across the app that dim their label at rest and brighten it on hover were brightening it to literal white, whatever the theme. They now follow the theme like everything else. Dark themes are unaffected, their foreground colour already being white, and the handful of buttons that turn a solid accent colour on hover read better for it rather than worse.

### Security
- **Bumped the Tiptap editor stack to 3.31.1 for a prototype-manipulation advisory in `@tiptap/core` (GHSA-cp6q-959q-f8rh)** — `mergeAttributes()` copies keys straight out of `Object.entries()` with ordinary bracket assignment, so an own `__proto__` key coming from JSON invokes the legacy prototype setter instead of writing a property: the returned object carries an attacker-controlled prototype while `Object.keys()` and own-property checks show nothing. That matters because ProseMirror's `DOMSerializer.renderSpec()` enumerates attribute objects with `for...in`, which walks inherited keys — an inherited `src` and `onerror` become real attributes on a rendered `<img>` and the handler runs in the app's origin. Medium severity, CVSS 4.0 6.4; the fix landed in 3.30.4 and the whole stack moves 3.19.0 → 3.31.1. **No running Bambuddy install was exposed.** The advisory needs either an untrusted object reaching `mergeAttributes()` or a custom/dynamic extension that preserves the attribute object, and Bambuddy has neither: nothing under `frontend/src/` calls `mergeAttributes` or defines an extension, and the one editor (`RichTextEditor`) builds a fixed schema from StarterKit plus six stock extensions whose `HTMLAttributes` are static literals. Content also crosses the boundary as an HTML **string**, never as JSON, so no own `__proto__` key can reach an attributes object in the first place — ProseMirror's DOM parser only fills in the attributes the schema declares — and every read-only render of that content is sanitized (`DOMPurify.sanitize` for project notes, `sanitizeHtml` in the project-page modal). This is a lockfile-only change: `frontend/package.json` already declared `^3.11.1`, so the patched line was inside the existing range and only the stale lock held it back; no `overrides` entry was needed. A side effect worth recording is that `@tiptap/pm` has narrowed what it pulls in, so `prosemirror-markdown`, `prosemirror-menu`, `prosemirror-collab`, `prosemirror-schema-basic`, `prosemirror-trailing-node`, `markdown-it` and `linkify-it` leave the tree entirely (16 packages) — which retires the reachability argument recorded for the `linkify-it` bump in 1.2.5, since that package is simply no longer there. Verified with eslint, the production build and its Safari 16 baseline check, and the full frontend suite (3514 tests across 256 files); `npm audit --omit=dev` reports zero vulnerabilities.
- **Bumped the build and lint toolchain for three development-dependency advisories in `browserslist` and `@humanfs/node` (GHSA-73wf-gq98-2v4g, GHSA-c83g-rgw3-j3cx, GHSA-p498-v437-472g)** — `browserslist` moves 4.28.1 → 4.28.8 for two high-severity issues: `normalizeStats()` walks an untrusted `browserslist-stats.json` with an unguarded `for...in` and uses the keys for plain bracket access and assignment, so a `__proto__` or `constructor` key either crashes the build or writes to the prototype (CVE-2026-73088), and the query-result cache has no eviction at all, so a long-lived process fed distinct queries grows without bound (CVE-2026-73089). `@humanfs/node` moves 0.16.7 → 0.16.8 for a medium-severity path-traversal issue where `copyAll()` ignores symlink state and `fs.copyFile()` dereferences the link, copying data from outside the source tree. **No running Bambuddy install was exposed, and neither issue was reachable even at build time.** Both packages are development-only — they are absent from the shipped image, and `npm audit --omit=dev`, which is what CI gates on, reported zero findings before and after. `browserslist` is never called by our own code; it arrives under `autoprefixer` and `@babel/helper-compilation-targets`, there is no `browserslist-stats.json` anywhere in the repository or up the directory tree, no `browserslist` key in `package.json` and no `.browserslistrc`, and nothing passes `--stats` or `opts.stats`, so the untrusted input the first advisory needs has no way in; the unbounded cache needs a long-lived process taking attacker-chosen queries, where `vite build` is one-shot with a fixed query. `@humanfs/node` arrives under `eslint`, which calls only `isDirectory` and `walk` and never copies anything, so the copy path the advisory describes is never entered. Lockfile-only — every existing range already admitted the patched versions, so `frontend/package.json` is untouched. The bump carries `caniuse-lite` 1.0.30001769 → 1.0.30001810, `baseline-browser-mapping` 2.9.19 → 2.11.20, `electron-to-chromium` 1.5.286 → 1.5.420, `node-releases` 2.0.27 → 2.0.54 and `update-browserslist-db` 1.2.3 → 1.3.2, all of which feed autoprefixer's target data — the rebuilt bundle is byte-identical, same content hashes, so `static/` does not change. Verified with a clean build against the Safari 16.0 baseline check, eslint, 3514 frontend tests across 256 files, i18n parity in all 13 locales, and `npm audit` reporting zero findings with and without dev dependencies.
- **Bumped `fflate` to 0.8.3 for a denial-of-service advisory reachable through three's compressed-format loaders (GHSA-px8p-9vwx-vf98, #3034)** — `unzipSync()` treats a central-directory entry whose compressed size is the Zip64 sentinel `0xFFFFFFFF` as a Zip64 entry and scans its extra field for the header id `0x0001`, with nothing telling the scan where that field ends: `z64e()` then reads past the end of the buffer, the `undefined` that comes back coerces to 0, and the loop condition can never go false, so the tab spins at 100% CPU until it is killed (CVE-2026-45820, medium, CWE-400). **No running Bambuddy install was exposed.** Unlike the other two entries here this one is classified runtime rather than development scope, so it is worth saying exactly why it cannot fire: `fflate` reaches the tree only as a dependency of `@types/three`, which is a types-only package whose imports TypeScript erases at compile time, so it never becomes a runtime import at all. The ten three.js addons that genuinely call it — `3MFLoader`, `FBXLoader`, `KMZLoader`, `AMFLoader`, `EXRLoader`, `USDLoader`, `VTKLoader`, `NRRDLoader`, `USDZExporter` and `EXRExporter` — are imported nowhere in the frontend or the backend; the four this project does use, `OrbitControls`, `BufferGeometryUtils`, `STLLoader` and `RoomEnvironment`, reference none of it. `3MFLoader` is the one worth checking twice given what Bambuddy spends its time reading, and it is genuinely absent: 3MF files are parsed on the backend, not in the model viewer. The shipped bundle confirms it, carrying no fflate signature whatsoever — `unzipSync`, `z64e`, `invalid zip data`, `no stream handler` and `extra field too long` are all absent, and the one inflate error string that does appear belongs to pako, which the surrounding `e.msg=` / `n.mode=30` zlib-port idiom identifies unambiguously. Lockfile-only: three lines, no `frontend/package.json` change, nothing added or removed, and no transitive churn. The reason a package that never ships shows up in runtime scope at all is that `@types/three` sits in `dependencies` rather than `devDependencies`, which is left alone here rather than moved in a security bump.
- **Bumped Vitest to 4.1.11 for a path-traversal advisory in `@vitest/mocker` (GHSA-82fw-gwwq-j7x9)** — the mocker registers a redirect mock's target path without checking it against Vite's file-serving allowlist, and the plugin's `load` hook then hands back `readFile(mock.redirect)` as the module source. Registration derives that path as `join(server.config.root, new URL(event.redirect).pathname)`, which does not confine anything: a non-special scheme leaves `..` segments in `pathname`, so the join resolves outside the project root, and even a path that stays inside it is read without the `server.fs.deny` check the dev server would otherwise apply to an in-root `.env`. Medium severity, CVSS 3.1 5.9, CWE-22; fixed in 4.1.11 and 5.0.0, with 2.1.x and 3.x unmaintained. **No running Bambuddy install was exposed, and the issue is not reachable in this project's test runs either.** The unauthenticated variant is specifically the public `mockerPlugin` and standalone `interceptorPlugin` exports, which attach the handler to Vite's HMR WebSocket — a socket with no token, Origin or same-origin check — and those exports exist for third-party dev servers embedding the mocker; nothing under `frontend/src/` imports either one. Vitest's own browser mode registers mocks over a token-authenticated RPC instead, and it is not installed here at all: `@vitest/browser` appears in the lockfile only as an unmet optional peer, and `vitest.config.ts` runs a plain jsdom environment, so no dev server is listening during a test run in the first place. Both packages are development-only — absent from the shipped image, and `npm audit --omit=dev`, which is what CI gates on, reported zero findings before and after. Fifteen lockfile entries move, every one of them dev-scoped, with nothing added or removed: the eight `@vitest/*` packages and `vitest` itself go 4.1.8 → 4.1.11, carrying `es-module-lexer` 2.1.0 → 2.3.2, `expect-type` 1.3.0 → 1.4.0, `obug` 2.1.1 → 2.2.1, `std-env` 4.1.0 → 4.2.0, `tinyexec` 1.2.4 → 1.3.1 and `tinyrainbow` 3.1.0 → 3.1.1. Unlike the other entries here this one does touch `frontend/package.json`: the existing `^4.1.8` range already admitted the patched version, so the lock alone would have pinned it, but the declared floor is raised to `^4.1.11` so that a regenerated lockfile cannot resolve back below the fix. Nothing in `src/` changed, so the rebuilt bundle is byte-identical and `static/` does not move. Verified with the full frontend suite running on 4.1.11 (3562 tests across 259 files), eslint, the production build and its Safari 16.0 baseline check, i18n parity in all 13 locales, and `npm audit` reporting zero vulnerabilities with and without dev dependencies.


## [1.2.5.5] - 2026-08-30

### Changed
- **Updating now repairs a service file that was written before the `--loop asyncio` pin existed (#3001)** — `install.sh` has pinned the loop since 2026-07-05 (#1896), but nothing has ever rewritten an *existing* service file: `install/update.sh` does a `git reset --hard`, a pip install, a frontend build and a restart, and never touches the unit. uvloop has been in every native venv since `uvicorn[standard]` entered `requirements.txt` on 2025-11-28, and uvicorn's `--loop auto` prefers it, so every native install created in that seven-month window has been running on uvloop ever since and no amount of updating has changed that. It cost them every RTSP camera on 1.2.5.4, and before that it left them exposed to a Virtual Printer FTP upload being silently truncated into a corrupt `.gcode.3mf` — which is why #1896 shipped a ZIP-validation backstop alongside the pin, since the pin could never reach the installs that already existed. Both update scripts now add the missing flag themselves: `update.sh` to the systemd unit, `update_macos.sh` to the launchd plist, in each case while the service is stopped so the repair takes effect on the same restart. Only the one flag is ever inserted — a hand-edited port, extra hardening, `ExecStartPre` lines and everything else stay byte-identical, and the file is copied to a timestamped backup first. Anything that is not a single-line unit invoking uvicorn directly is described rather than edited: a wrapper script, an `ExecStart` continued across lines, several `ExecStart` lines, a unit that is not writable, or a service carrying systemd drop-ins, since a drop-in may be what defines `ExecStart` and editing the fragment would then change nothing while reporting success. A loop pinned deliberately is also left alone — someone who wrote `--loop uvloop` on purpose gets no argument, only the startup warning. The check reads the *effective* `ExecStart` from systemd rather than the file, so a drop-in that already pins the loop counts and the repair is idempotent.
- **Bambuddy now says so at startup when it is running on uvloop (#3001)** — every unit file this project ships pins `--loop asyncio`, added for #1896 because uvloop's SSL layer can drop buffered data and truncate a Virtual Printer FTP upload into a corrupt `.gcode.3mf` that is acked `226` and forwarded to a printer. Two populations run a unit nobody here wrote and therefore have no such pin: the Proxmox VE Helper-Scripts LXC, which composes its own `ExecStart`, and native installs created before that fix landed on 2026-07-05, which never gained the flag because `install/update.sh` does not rewrite unit files. Neither had any way to know. #3001 only surfaced them because losing every camera at once is loud; a truncated upload is silent, and there is nothing to notice until a print fails from a file that was corrupt on arrival. Startup now logs one WARNING naming the loop, the risk and the exact flag to add. It is a warning and not a refusal: a server that answers requests beats a purist one that will not boot, and by the time any application code runs uvicorn has already chosen its loop. The check asks the running loop what it is rather than whether uvloop imports — uvloop is a hard dependency here, since `requirements.txt` pins `uvicorn[standard]`, so its presence says nothing about what is in use — and it matches on the module name so that asking the question never imports uvloop on a host that lacks it.

### Fixed
- **Every camera stopped working on 1.2.5.4 (#3001, reported by @Jieper001, confirmed by @JmanB52D and @hikingthunder)** — live view, snapshots, timelapse frames and the camera diagnostic all failed at once on every RTSP model — X1, H2 and P2 — with the in-app diagnostic reporting `capture_exception` at 0 ms while network reachability passed at 1 ms. That 0 ms is the whole story: the failure happened before a socket was opened. The RTSPS proxy added in 1.2.5.4 finished by hanging its set of in-flight connection handlers on the server object as an attribute. `asyncio.start_server` returns an `asyncio.base_events.Server`, which has a `__dict__` and accepts that; under uvloop it returns a `uvloop.loop.Server`, a Cython cdef class with no `__dict__`, which raises `AttributeError` outright. Every launch path this repo ships — the Dockerfile, `install/install.sh`, `deploy/bambuddy.service`, the Windows service and the SpoolBuddy installer — pins `--loop asyncio`, added for #1896, so none of them selects uvloop and none of them could hit this. What broke is the installs running a unit file we did not write. The Proxmox VE Helper-Scripts LXC composes its own `ExecStart` with no loop pinned, and `requirements.txt` pins `uvicorn[standard]`, which installs uvloop on Linux, so uvicorn's default `--loop auto` selects it — that is the reporter's install and the two that confirmed it. Native installs created before the #1896 pin landed on 2026-07-05 are in the same position for a different reason: `install/update.sh` never rewrites the unit file, so a service written before that date has never been given the flag by any update since. Those installs are also still exposed to #1896 itself, where a truncated Virtual Printer FTP upload corrupts a `.gcode.3mf` silently; the camera outage is simply the visible half. Hence a fix in the code rather than another flag in a unit file: the proxy now works on either loop instead of depending on the launch command to steer around it. The handler set now lives in a module-level registry keyed weakly by server, which both loops accept; keying it weakly rather than by `id(server)` means a proxy abandoned without a close takes its entry with it, instead of leaking one forever and eventually handing a new server a dead one's handlers once CPython recycles the address. A1 and P1 use the chamber-image protocol and return before the proxy is built, so they were never affected, and external RTSPS cameras caught the error and fell back to a direct connection, so they kept working without the TLS workaround. The reason the test suite could not see any of this is that `conftest` builds its event loop from the default policy, so every async test in the repo runs on the selector loop — the one loop where the assignment was legal. The regression is now pinned twice: once by a test that drives the real function on a real uvloop loop, and once by a test that gives it a `__slots__` server, so the contract holds even where uvloop is not installed. The two external-camera teardowns were also switched to `close_tls_proxy`, which #2968 introduced and left them out of, so they no longer leave handlers running past the server that owned them.

## [1.2.5.4] - 2026-08-29

### Added
- **Sub-projects on the Projects page can be folded away (#2991)** — A project with sub-projects drew every one of them expanded underneath it, at every level, with nothing to shut. That is fine for two projects and unusable for a three-level hierarchy over a couple of hundred archives, where the page becomes one long scroll before the first thing you were looking for. Each group's "Sub-projects of X" caption is now a chevron that folds that group, and a **Collapse** pill next to the status filter tabs sets the default for the whole page and is remembered across reloads. The caption stays visible when a group is shut — it is the way back in, and it carries a count of what is behind it. That count is of the cards actually nested there, not the card's own sub-project badge: the API counts sub-projects across every status on purpose, so under the default Active filter the badge can legitimately say 2 where only one card will unfold. A group folded by hand deviates from the default until the pill is pressed, which resets those deviations rather than leaving a group defying the switch that was just flipped. Nothing changes for a page with no nesting, where the pill is not shown at all, and the default with no stored preference is still fully expanded.
- **Dutch (nl) is now a supported interface language (#2891, requested and contributed by @Igiegel)** — Adds `nl` as the fourteenth locale, listed as "Nederlands" in the language picker. The translation was contributed as a file on the issue and needed three corrections before it could be wired up, all of which the parity gate found. First, the nine `stats.timeframe.*` entries had their **keys** translated along with their values (`'today'` had become `'vandaag'`), which would have left the Statistics timeframe selector resolving nothing and rendering raw key names for every Dutch user — the values were kept and the keys restored. Second, the file was translated against an older `en.ts` and was 84 leaves short, missing the Filament Track Switch feed prompts, the AI-detection status strings, the no-3MF internal-history banner, the batch-order stranded-plate notices, the Avery starting-position field and the whole `locationHaSensors` section from #2824; those were translated and added. Rather than splice them in, `nl.ts` was regenerated from the `en.ts` skeleton with the contributor's strings carried over, so its structure, key order and section comments now match the reference locale exactly and a future diff against `en.ts` reads as content rather than as reordering. Third, 229 leaves were identical to English; each was checked individually and all were kept, because Dutch takes most technical UI vocabulary verbatim — printer, filament, status, nozzle, timelapse, dashboard — and Dutch slicer users use the English feature names (support, ironing, prime tower, gap fill) untranslated. Those 123 distinct values are now listed explicitly in a `NL_COGNATES` allow-list in `check-i18n-parity.mjs`, the same shape the other twelve locales use, so the exemption is an enumerated translator decision rather than a blanket skip. Parity green at 6264 leaves across all 14 locales.
- **A spool can carry a different filament preset on each printer model, and its K profiles are picked per hotend** — A slicer preset is bound to a printer model: `Bambu PLA Basic @BBL X1C` is not the same preset as `@BBL H2C`. A spool stored exactly one, which was right until the same spool was used on a second model — the AMS slot on the other machine was then configured with a preset that machine has no profile for. The spool form's PA Profile tab is now a **Printers** tab holding both halves of the answer: a model list on the left, and on the right that model's filament presets and the K profiles for each of its hotends. Presets are keyed on the printer *model*, because `@BBL X1C` is the same preset on every X1C you own and asking once per machine would mean picking the identical value twice; K profiles stay keyed on the individual printer, extruder and nozzle diameter, because a K value is measured on one physical hotend and two machines of the same model legitimately differ. Both halves cover **every nozzle size — 0.2, 0.4, 0.6 and 0.8 — not only the size currently fitted**, because a spool is configured once and nozzles get swapped: presets get a row per size (the preset is written to an AMS slot, a slot feeds exactly one nozzle, and Bambu names its presets per size anyway), and K profiles are laid out as a grid with size down the side and hotend across the top, a dash marking a size the printer has no calibration for. Anything left alone inherits the spool's own preset and keeps inheriting it when that changes later, so only what actually differs needs an override, and a spool nobody has configured behaves exactly as it did before. Each model is offered only the presets that name it — using the same matcher the Configure AMS Slot modal filters with, now shared between them — while presets whose name identifies no model, which is most user-authored and OrcaSlicer ones, stay available everywhere, and a preset already saved is never hidden from the control that shows it. Every preset carries an origin badge — Bambu Cloud, Orca Cloud, Local or Built-in — in the same wording and colours the Configure AMS Slot modal has used since #1623, because the same filament exists in several of those sources and which one is picked decides what actually reaches the printer. **Auto-match** fills every size of every model with the variant of the spool's preset that names it, preferring the variant for that exact size; a model with no such variant is left inherited rather than given an approximate one. The model list stays one row per model however large the fleet is, and carries a count of hotends still without a K profile so an unfinished spool is visible without opening anything. One limit worth knowing: a per-model override can be one of your own cloud presets, whose id the slicer refuses in a slot's filament field, so such an override configures the slot but is not used as the calibration link — the spool's own preset is used there instead.
- **K profiles distinguish High Flow from Standard nozzles** — A printer files each calibration under a nozzle id of the form `HH00-0.4` (high flow) or `HS00-0.4` (standard) and can hold both for one diameter — a maintainer's H2D carries 102 high-flow entries and 6 standard — because the same filament reads a different K through each. The picker labels every profile with the flow it was measured on, saving records it, and a stored profile is no longer applied when the fitted nozzle disagrees; the picker marks such a profile rather than letting it look configured while quietly doing nothing. Two spellings have to agree for that: a calibration entry says `HH00-0.4` while the fitted nozzle reports `HH01`, so the comparison is two characters, not four. An unknown flow on either side matches anything, which is what it must do — every K profile stored before this has none, and an X1C declares none on any profile at all (measured: all eight come back with an empty nozzle id) even though the machine really does take either nozzle, so treating silence as "Standard" and filtering on it would have dropped every X1C profile the moment a high-flow nozzle was fitted.
- **Every path that configures an AMS slot respects a spool's per-model preset and per-hotend K profile** — The manual assign in either inventory mode, the RFID auto-assign, the Spoolman tag link, the re-fire when a slot goes from empty to loaded, the re-apply after a calibration-table refresh, and the re-selection when a Filament Track Switch moves an AMS to the other nozzle. The Configure AMS Slot dialog also opens on the spool's own configured values, falling back to the slot's last manual configuration and then the tray's RFID data, rather than ignoring what the spool was configured with on the one screen that looks like it exists for it. A printer card in expanded view now lists every fitted nozzle size rather than the first entry alone, which on a machine with two different sizes named one hotend and implied it was the whole printer.
- **An Avery sheet can start at the first unused position, so a part-used sheet is not thrown away (#2879, requested and contributed by @whitigol in #2918)** — Label PDFs always began in the top-left slot, so the second batch printed onto a sheet that already had seven labels taken off it would have printed over the gaps. Spool labels are printed a few at a time as filament arrives, which meant spending a 30-slot Avery 5160 sheet on two labels or nothing. A **Starting label position** field in the print-label dialog now says which slot to begin at, counted the way the sheet reads — left to right, top to bottom, starting at 1. The offset applies to the first page only and later pages restart at slot 1, because the number describes the sheet already in the tray rather than anything about the job: the second sheet the printer pulls is a fresh one. Position 1 is the default and is what a request that omits the field means, so both label endpoints — built-in inventory and Spoolman — behave exactly as they did for anyone who never touches it. The bounds are per template and enforced on both sides, 1–21 for Avery L7160 and 1–30 for Avery 5160; the server derives them from the sheet layout table it already lays labels out from rather than carrying a second copy of the numbers, so the two cannot drift, and a non-default position is refused outright for the single-label roll templates where a sheet slot means nothing. In the dialog the two sheet buttons disagree about the same number — 25 is valid on a 5160 and off the end of an L7160 — so the button whose capacity the value exceeds is disabled and its hint is replaced by that sheet's own range, instead of leaving a disabled button next to guidance that says the value is fine. The sentence naming the skipped slots deliberately avoids i18next's reserved `count` variable: with no `_one` form defined, a value of 1 resolves past the translation to the English default, so every non-English locale would have printed an English sentence at position 2 and only at position 2. Translated in all 13 locales, README and wiki updated, and covered by renderer, endpoint and dialog tests including the page-boundary cases where the selection exactly fills the offset first sheet and where it runs one past it.
- **A fault's description is in the status response, so a client no longer needs its own copy of the table (#2926, proposed and analysed by @sadontsev)** — `HMS_ERROR_DESCRIPTIONS` has been in the backend all along and the status response never carried it, so every consumer that wanted to tell a user *why* a print halted resolved the same 853 codes from its own duplicate of the same sentences — this repo's Python table, the frontend modal's, and at least one third-party iOS client whose catalogue exists purely because the server would not say. Each aged separately, and a push relay watching a printer could only manage "your printer needs attention" while the server already knew it was "Filament ran out. Please load new filament." `hms_errors[]` entries now carry `description`, defaulting to null so a client that has never seen the field is unaffected. It is resolved once, where the fault is parsed, rather than at the boundary that happened to prompt the request: there are three separate serializers of a fault — the status response, the WebSocket broadcast, and the print-completion payload the queue's failure reason is built from — and adding it to only the first would have delivered half the feature to a relay watching the stream, which is the likelier consumer. The queue's failure reason now quotes the same sentence instead of resolving the code a fourth time, and the notification path reads it rather than re-deriving its own. Resolving in one place is also what makes the three unable to drift, which is pinned by a test that asserts they agree. Resolution is exactly what the codebase already did, verified rather than assumed: an 8-char `print_error` is the catalogue's `MMMM_EEEE` key split in half, and a 16-char `hms[]` identifier is tried whole and then collapsed to its first and last groups, which is how the notification path, the queue's failure-reason helper and the frontend modal have always resolved those. The collapse is lossy — #2728 counts 65 documented faults falling onto `0300_0001` alone — and it is kept rather than tightened here because refusing it would not read the same data more strictly, it would stop describing faults that are described today and leave this field null while the UI shows text for the same fault. Narrowing it belongs with #2728, where both key spaces can move together. A fault the catalogue does not cover reports null and is still reported in full; `full_code` identifies it either way. The equivalence is pinned by a test that checks every catalogue code in both fault shapes across all three alert levels, so a future change to the lookup cannot silently stop notifications from firing. The text is English only and unlocalized, which the schema says next to the field. The frontend keeps resolving its own text for now; switching it over would change what `filterKnownHMSErrors` counts across eight call sites, which is #1840 and #2728's argument rather than this one's.
- **A virtual printer can be told which address to advertise, so uploads work on Docker bridge networking (#2930, reported and diagnosed by @sebimarkgraf)** — `VIRTUAL_PRINTER_ADVERTISE_ADDRESS` sets the address written into the MQTT status that BambuStudio and OrcaSlicer read their FTP upload destination from. It exists for deployments where that address is not one of the container's own interfaces: on bridge networking the virtual printer is reached on the host's LAN IP but binds a private one like `172.24.0.2`, and that private address is what the slicer was handed — so it opened an FTP connection to an address that does not exist on its network, which is the upload stalling around 10% with "Failed to send" that the troubleshooting page has been describing as a limitation with no fix. Set it to the address slicers use, alongside the `VIRTUAL_PRINTER_PASV_ADDRESS` that already existed for the passive-data channel. The log line that arms the rewrite names its source, so `(VIRTUAL_PRINTER_ADVERTISE_ADDRESS)` versus `(bind_address)` says whether the variable reached the container. A value that is not a dotted-quad IPv4 is refused with one warning naming it and the address that would have been used before is used instead — deliberately, because refusing to rewrite at all would put the *real printer's* IP back in front of the slicer, which is the leak this path exists to close and strictly worse than the wrong local address. `0.0.0.0` counts as unset, and surrounding whitespace is tolerated for the sake of values pasted into a compose file. This is an environment variable rather than a change to how the advertised address is resolved, and that was the decision worth making carefully: the virtual printer already has a "Network Interface Override" field, but it feeds SSDP and the certificate's SAN list only, and reading it here would have moved the upload destination on every install that has one set — the multi-NIC, VLAN and Tailscale setups, which are the ones most likely to have been arrived at by hand and the least likely to survive being second-guessed. Unset, nothing about the resolution changes, which is pinned by a test. Host and macvlan networking still need none of this and remain what Virtual Printer is developed against; the variable removes one blocker rather than making bridge mode equivalent, and the wiki now says so in the three places that previously stated the host address could not be discovered at all.
- **Printer file downloads can be selected in ranges and print-history videos can be downloaded (#2850, requested and contributed by @logikal in #2853)** — The printer file browser's multi-select download now prepares large selections on the app data volume instead of buffering them in server and browser memory, uses per-file compression (videos stored, G-code/3MF compressed), reports partial results and preparation progress, supports cancellation, rejects over-large or under-space selections, and preserves the legacy API contract. Shift-click selects a contiguous visible range and hidden selections are discarded when navigating or filtering. Print History now offers attached timelapses, matching printer timelapses, and `/ipcam` chunks when available; offline or unreadable storage is distinguished from an empty directory. Download tokens are single-use and resource-bound, API-key printer allowlists are enforced, FTP short reads are rejected, and abandoned staging is pruned. Translated in all locales; wiki updated. Covered by backend and frontend regression tests.
- **Bambuddy now asks a printer that refuses FTPS what it actually said (#2780, measured by @grolmus)** — When a printer's file service answers port 990 with something that is not TLS, Python reports `[SSL: WRONG_VERSION_NUMBER]` and the bytes that caused it are gone, consumed by the TLS layer before the error surfaces. That has left #2780 open on a theory rather than a finding. The client now opens one plain connection straight afterwards and reads what the printer says, so the log carries the printer's own words — an FTP refusal such as `421 Too many connections` would identify the fault outright — and the line is marked as the one to quote in a report. Reading nothing is informative too, and says so: a healthy implicit-FTPS service stays silent until it gets a handshake, so silence means the refusal had already passed. It asks once per cool-off window rather than once per attempt, which keeps it to one extra connection per printer per five minutes — the suspected fault is a printer running out of connections, so the diagnosis must not add to it. What made this worth doing is a measurement from a nine-printer farm, reproduced here: a cleartext banner on the TLS port produces exactly the error the field reports, a genuine TLS version mismatch produces a different one, and a client with no version cap reaches a TLS-1.2-only peer unaided. So this failure was never a TLS-version problem, and the per-model `cap_tls_v1_2` knob cannot affect it. Two of the three entries carrying that knob were added on the belief that it could; they are kept, since their reporters saw the symptom clear and nobody here has the hardware to re-test on, but they are now marked for re-test and the reasoning recorded next to them is what was measured rather than what was assumed. Both measurements are pinned by tests, so the explanation stays falsifiable.
- **The K value is on the AMS slot itself, not only in the popover (#2532, requested and contributed by @gyrene2083)** — Reading back a slot's pressure-advance value meant hovering it: the K factor lived in the filament popover alone, so checking whether a calibration had actually taken across four slots was four hovers, and comparing two of them side by side was not possible at all. Every slot card now carries the value under the material name, the way Bambu Studio shows it per slot — on regular AMS units, on AMS-HT, and on the external spool of a dual-nozzle machine. Only a value the printer actually reported is shown: a loaded but never-calibrated slot stays blank rather than inheriting the 0.020 that fills the popover's own field, and a slot the firmware reports as exactly 0 counts as uncalibrated the same way the stored K-profiles do. The label is shortened to **K** with the full localized name on hover, because "K Factor", "K-Faktor" and "Facteur K" ate the value itself — the whole point of the line — on cards under about 350px, and the figure is set in tabular numerals so it measures the same in Safari as in Chromium. Where one slot of a unit is calibrated and its neighbours are not, the neighbours hold the same row open so the fill bars stay level across the card.
- **Filament Track Switch: the inlet each AMS feeds, and K-profiles that follow it** — With a switch fitted an AMS is not wired to a nozzle any more. It is plumbed into one of the switch's two inlets and reaches both hotends through it, so every unit reports its extruder as "not fixed" and `ams_extruder_map` comes back empty. Bambuddy had nothing to fall back on but the AMS unit number, so AMS-A was badged R and AMS-B was badged L purely because their ids are 0 and 1, a third unit got no badge at all, and every one of those labels was wrong; the SpoolBuddy assign modal had the same fallback in a worse form, mapping anything that was not extruder 1 to R. The binding needed no new telemetry — it sits in bits 24-27 of the same AMS info string Bambuddy already parses for the unit's type and extruder id, and is read only when a switch is installed, because without one "not fixed" really does mean an uninitialised unit. The badge keeps L and R, in its own colour, with the inlet named in full in the tooltip, since the letter is the inlet's position and not a claim about which nozzle that AMS feeds: the switch can route either inlet to either outlet. Both views update live, which took adding the switch fields to the WebSocket payload and to the broadcast dedup key — the binding is not part of the AMS change hash and must stay out of it, because that hash drives Spoolman sync. The calibration half is where it bites. K-profiles are numbered per nozzle, so the same index means a different profile on each hotend, and a tray holds exactly one index: move an AMS to the other inlet and every configured slot silently kept pointing at the old hotend's table. Measured on an H2C, a black PLA calibrated 0.018 left and 0.020 right stayed on the left profile after the move, and a manual RFID re-read only re-asserted the same wrong one. Three separate copies of "which extruder is this slot on" each ended in `else 0`, which on a switch machine filed every profile under the right-hand nozzle; they now share one resolver that returns unknown as its own answer, because unknown and extruder 0 are very different things on a dual-nozzle machine. Moving an AMS now re-selects each configured slot's counterpart profile for the nozzle it has arrived on, and only for spools that already have one there — a slot nobody has configured, or a spool calibrated on one hotend only, is left exactly as the operator set it. Configure Slot resolves against the slot's own nozzle throughout: options name the hotend, a filament calibrated on both gives two distinguishable entries, matches are scoped to the nozzle the slot feeds, and the other hotend's profiles stay reachable under Other K profiles. The print dialog's slot dropdown picks up the same inlet labelling and notes when every filament a print needs sits behind one inlet, which is legal but slow — a change between two spools on the same inlet retracts all the way back to the AMS, where a change across the two only retracts as far as the switch. Assigning an AMS to an inlet stays on the printer: Bambu Studio can read that binding and has no command to write it.

### Changed
- **The spool form is wider, and its colour, weight and cost fields have their own tab** — The Printers tab is a model list beside a detail pane, which needs the room. Colour, spool weights, price, category and storage location move out of the bottom of a long scroll into a **Color & Cost** tab, laid out in two columns rather than one short field per row. Filament identity and the slicer preset stay on the first tab.
- **Home Assistant sensors moved out of the Smart Plugs settings tab into their own (#2824)** — Sensors are things you read and plugs are things you switch, and with storage-location bindings joining the printer ones the two no longer belong on one page. Both now live under **Settings → Sensors**; nothing about the printer bindings themselves changed, only where they are. The template that carried the printer alert is renamed from "Home Assistant Sensor Alert" to "Printer Sensor Alert", along with the toggle and badge labels that name it, because once a storage-location alert existed beside it the old name no longer said which one it was; the rename only touches templates still holding the old default name, so one that was edited keeps whatever it was called. A battery-class printer sensor now draws a battery icon instead of the generic gauge — the printer map never had an entry for it and the shared one does, which reads as the omission it was rather than a choice worth preserving.
- **Storage locations sort the way they are named (#2824)** — The locations list was ordered by `ORDER BY name`, which puts "Drybox 10" between "Drybox 1" and "Drybox 2". It is now sorted on the numbers inside the name, so a rack numbered past nine reads in rack order everywhere the list appears.
- **Camera view mode is picked at the camera button, per printer** — Whether a camera opened in its own browser window or as a floating overlay was one dropdown in Settings → General → Camera, applied to every camera on the install. Deciding it per printer meant leaving the Printers page, changing the setting, coming back, opening the camera, and going back again to undo it. The camera button on the printer card is now a split control: the icon opens the camera whichever way you opened the last one, and the caret beside it offers both modes, with the one in effect ticked. Picking a mode opens the camera that way as well as making it the mode the icon uses from then on, because a menu that only changed a preference would leave you a second click to do the thing you had already asked for. The choice lives in your own browser, so two people watching the same farm can each have the view they want; `camera_view_mode` survives as the default a browser that has never chosen starts from, and is written back when you hold `settings:update`. The Cam Wall follows the same remembered mode, and the popup-opening code the card and the wall each had a copy of is now shared, with a corrupt saved window geometry falling back to defaults instead of throwing. The effect that force-closed every open overlay when the setting flipped to window is gone — it made sense for a global switch, not for a choice made per click. No new locale strings: the four the settings control used are reused as the menu's labels and tooltips.
- **A file dropped on a busy or offline printer is queued instead of refused (#2849, reporter @abraha2d)** — Dragging a sliced file onto a printer card refused the drop unless the printer was connected and neither printing nor paused. The overlay went red with "Printer busy", the handler returned early, and the file was discarded with no toast and nothing uploaded; the card's Print button was hidden by the same condition, so both routes into printing from the card closed at once and the way through was the File Manager. The gate never described a real constraint. Every print Bambuddy sends becomes a queue item, and dropping onto an idle printer only looks instant because the scheduler dispatches it on the next pass — busy is a timing difference, not a different path, which is why the print dialog has always accepted a busy target and said the job would start later. Offline is included for the same reason: the queue dispatches when the printer comes back, so a machine that is powered down can be given work. The overlay now says which one is happening, "Drop to print" when the job would start immediately and "Drop to queue" when it would wait, using the same predicate the print dialog uses for its own later-start notice so the card cannot promise something the dialog contradicts a second later. The drop is also gated on the permissions the flow actually exercises — `library:upload` and `queue:create`, the pair the Print button beside it has always checked — instead of `printers:control`, which it checked and never used, and which let someone holding it alone get the file uploaded and then rejected by the queue, leaving an orphaned library row behind.
- **An archive that arrives with only a name now says what to do about it (#2843, reporter @gyrene2083)** — The no-3MF banner and the connection diagnostic both explained why a print archived with nothing but a name and offered nothing to do about it, and the explanation was wrong in the way that mattered most: both blamed the printer's firmware and said no setting changes it, which reads as "your machine is broken and nothing will help". Measured on hardware: same Bambu Studio, same model, three printers a minute apart, all reporting the external-storage option as on — the H2C and H2D went to internal storage and archived with a name only, the X1C went to the card and archived in full. The same H2C and H2D sliced in OrcaSlicer put the file on the card and archived in full, and turning the option off changed nothing, because OrcaSlicer always uploads over FTPS. So the destination is the slicer's choice, not the printer's, and the option governs neither slicer on this generation. Both strings now name Bambu Studio rather than the firmware and lead with the two routes that take one step — start the print from Bambuddy, or slice in OrcaSlicer — with Send-with-External followed by a separate print start offered as the way to stay in Bambu Studio. Both also mention that a card or stick is still needed, since with an empty slot OrcaSlicer refuses to send at all. Translated in all thirteen locales, and the README callout and this entry now link the upstream issue, bambulab/BambuStudio#10481, so the behaviour can be followed where it is tracked.
- **The Watchtower we recommend for daily builds is the maintained fork (#2917, reported by @CamelT0E)** — The daily-build instructions in the README, on Docker Hub and in every daily prerelease pointed at containrrr.dev/watchtower. That project has been archived and read-only since December 2025 and its last release, v1.7.1, is from November 2023, so anyone following the recommendation was being handed a container with Docker socket access that had not received a fix in over two years. Development continues in Nicholas Fedor's fork, which ships as `nickfedor/watchtower` and released v1.21.0 this month. All four references now point at watchtower.nickfedor.com and name the image, including the release-notes template in `docker-publish-daily-beta.sh` that produced the screenshot in the report — the READMEs alone would have left every future daily prerelease repeating the dead link. Existing images keep working; only the recommendation changed.
- **The Windows installer build is split in two so a signing request can wait for a human (SignPath Foundation)** — Release tags are Authenticode-signed through the SignPath Foundation OSS programme, and the production certificate does not sign on demand the way the self-signed test certificate does: every request has to be approved by hand in the SignPath UI, because the Foundation verifies what is being signed and which build it came from. The submitting action waits for that approval with a default timeout of 600 seconds, which is ample when the test policy approves automatically in seconds and far too short once the wait is a person noticing a tag went out. A tag pushed at night would have failed the run ten minutes later with the installer already compiled and thrown away. The compile now ends in its own job that uploads the unsigned artifact and stops; a second job downloads it, signs it, and does the release-facing work, with the wait raised to an hour. Because the artifact is uploaded before the wait begins and is addressed by id, a missed approval window is recovered by re-running the second job alone rather than rebuilding the installer — which is the reason to separate them rather than simply raise the timeout in place. The second job runs for unsigned builds too, so the daily prereleases that are deliberately left unsigned to preserve the signing quota keep going out through exactly one set of alias, artifact and release steps. The property that matters is unchanged and now recorded next to the steps that depend on it: none of the alias, upload or release-attach steps carry `always()`, so GitHub skips all three when signing fails or times out, and an unsigned `.exe` cannot reach a release. Nothing about the signed output changes, and the restructure behaves identically under the test policy — the request simply completes immediately instead of waiting — so it can be proven green before the production certificate arrives.
- **Generated thumbnails are lit, so one model no longer looks like the next (#2816, requested by @NaegeliJ, contributed by @sadontsev in #2861)** — Both renderers that draw a model themselves — the File Manager's STL/3MF thumbnails and the plate cards — handed matplotlib a mesh with no light source, and without one every triangle is filled with the identical green whichever way it faces. The result was a flat silhouette, so two models of similar outline were the same picture. The mesh is now shaded from a fixed light whose angle is pinned to the camera angle rather than chosen freely: the two are a pair, and a light aimed at the far side of the model gives both visible faces the same brightness and no contrast at all. Lighting then exposed two faults a flat render had hidden. A face wound the wrong way shades as though it faced away, so an STL with inconsistent winding came out patchy like camouflage; winding is now repaired before the render — outward rather than merely consistent, and only for the meshes that need it, since the check is milliseconds where the repair is seconds. And a mesh whose facets are all zero-area or collinear — stub or truncated STLs, 3MFs with an empty triangle list — would have failed outright once lit, so those are detected and still render flat instead of counting as a failure in a folder-wide batch. Both renderers share one copy of the light, the camera and the repair, so a plate card and a library thumbnail of the same model cannot drift apart. Passing the faces as an array rather than a list of lists also cut the collection build on an 82k-face mesh from ~0.19s to ~0.007s, which speeds up the unlit path too.

### Fixed
- **Some archived 3MFs lost their G-code when re-imported into the File Manager (#2993, reported via the in-app form)** — they never lost it. The download serves the stored file byte for byte, and the G-code was still in the zip; what differed was who was asked. On the archive side the answer came from the file itself — the green GCODE badge reads the layer count and print time that were parsed out of the plate G-code — while the library decided from the filename alone, so a sliced 3MF stored as `Foo.3mf` rather than `Foo.gcode.3mf` carried the badge and still came back as a source-only project with no Print button. That splits on how the print reached the printer, not on anything about the file — a slicer's LAN send names it `.gcode.3mf`, while a per-plate export or a cloud-dispatched print arrives as plain `.3mf` — which is why it looked random. Both sides now ask the same question of the zip itself, and every route into the library (upload, ZIP import, MakerWorld, external-folder scan) classifies on content rather than on the name. Files already in your library are re-checked once on the next start. The backend was always willing to print these, so this was only ever the interface refusing to offer something that would have worked; a genuine model file is unaffected, and one that now shows **Print** correctly stops offering **Slice**.
- **Swapping a spool left the previous spool's preset name on the AMS slot card** — pull a Bambu ABS Orange out of A1, put a PLA Matte Dark Blue in, and the card still read "Bambu ABS" against the new colour. The backend had it right all along: the RFID auto-assign rewrites the slot's stored preset the moment the tag is read. The browser simply never refetched it. The slot card reads that stored preset ahead of the filament id the printer is reporting, so one cached row outranked correct data arriving over the WebSocket — and because every other field on the card (colour, material, fill, K value) rides the status push and updated instantly, it surfaced as a single wrong line rather than an obviously stale card. The manual assign path already refreshed it; the RFID path did not. Spoolman mode was the worse half of the same bug: its AMS sync writes that same row but announced nothing at all, so there was no event to refresh on — it now reports each slot it changed or cleared. Two further changes make the card right without waiting on any of that: the slot's queries no longer sit behind the 3-second cascade debounce meant for print completion (a swap touches one slot, and any further event restarted that timer), and the card now ignores a stored preset whose filament id disagrees with what the printer reports in the slot, so the correct name is on screen from the status push alone. A hand-picked preset name still wins wherever the stored row and the slot agree, and a user or local preset — whose ids genuinely cannot be compared — is untouched.
- **A print that could not fetch its own 3MF could be charged another plate's filament (#2957, reported by @doncaruana)** — when the source file is missing, the usage tracker looks for a replacement in the library or in a previous archive and matched on the filename stem alone. That is far weaker evidence than it looks: Bambu Studio writes the printer-side filename from the project's `Title` metadata, so every plate of a project arrives on the printer under one name however the file was renamed on disk. The reporter's single-filament job was handed a previous archive's three-filament plate and three spools were debited for material they never extruded, with nothing on the archive to say the numbers were someone else's. A candidate is now refused when it holds a different plate than the one running, and an all-plates export is refused unless it actually contains that plate — previously the plate was looked for later, found missing, and every filament in the file was summed onto one plate's print. Where the printer echoes only the 3MF filename and the plate cannot be known at all, which is the reporter's own firmware, the candidate is still accepted on its name and a warning now says so rather than the deduction happening silently.
- **A slow-but-healthy 3MF download was cut off at 30 seconds (#2957, reported by @doncaruana)** — `ftp_timeout` is handed to every download as *both* the socket inactivity timeout and the whole-transfer deadline, which makes its default a cap on how big a file a printer is allowed to serve. The reporter measured the same 5.4 MB 3MF at 45 s off a worn P1S SD card and 25 s off a new one, and a 15.15 MB 3MF at 105 s; an older 7.8 MB archive in his logs survived only because the transfer happened to finish inside the retry grace. None of those links were broken — they were slow, which is what the inactivity timeout exists to tell apart. The total deadline now follows the size the printer reports for the file, against the same pessimistic 25 KB/s floor the upload path has used since #2529. The extension is granted only once the printer has answered `SIZE`, so a printer that is not answering at all still fails on schedule and the executor queue wait #2572 bounded is unaffected, and it is capped at five minutes because the print-start handler holds a pooled database connection for the length of its 3MF hunt. A transfer that overruns even that stretched deadline is not retried, for the reason an overrunning upload has not been since #2529: the retry would spend another full deadline reaching the same conclusion.
- **Bambuddy could run two heavy FTPS transfers against one printer at once (#2957, reported by @doncaruana)** — the reporter watched Bambu Studio itself lose its connection to a P1S while Bambuddy pulled a 12 MB 3MF, and a later log caught two Bambuddy downloads of the *same* 5,250,969-byte file overlapping during print start. A P1S at that moment is already serving the print off the same SD card and answering MQTT. Downloads now take turns per printer, the way uploads have since #2529. The gate is deliberately soft — a download that cannot have it within 30 seconds proceeds anyway, because a print losing its 3MF to queueing would be worse than the contention, and the printer file browser stays outside it entirely so a 3MF preview never waits out somebody else's multi-gigabyte selection — and it is now meaningful at all: the 90-second cap on a multi-path lookup used to return while its worker thread kept walking the remaining paths, still holding the printer's socket, so the walk is cancelled and waited out before the printer is handed on.
- **The cover thumbnail re-downloaded a 3MF another part of Bambuddy had just fetched (#2957, reported by @doncaruana)** — the cover endpoint and the print-start archive flow share a 3MF cache so whichever fetches first hands the file to the other (#972), but the cover endpoint consulted it once on the way in and then retried for up to two and a half minutes without ever looking again. In the reporter's log the archive flow published the file 42 seconds into that sequence and the cover's third attempt still pulled its own full copy of it, off a printer that was mid-print. It now looks again before each retry, and a file it picked up that way is left alone rather than re-registered under its own name or deleted on the way out — it belongs to the archive flow.
- **A camera snapshot occasionally logged an asyncio ERROR with a traceback into the camera code (#2968, reported by @ceasley)** — `Task was destroyed but it is pending!`, naming `create_tls_proxy.<locals>._handle()`, once every few hundred snapshots. Nothing was actually broken by it — the snapshots on either side of each one succeeded — but it is the loudest thing in an otherwise clean log and it reads like a camera fault. `asyncio.start_server` wraps the connection callback in a task and keeps only a weak reference to it, so the RTSPS proxy's handler could be collected while still waiting on its two forwarders; that message is the garbage collector noticing. Teardown had the matching gap: `server.close()` stops the listener but leaves established connections running, so the close waited on a handler that only finishes when the *peer* drops the socket — and by then ffmpeg has already been reaped, so the connection is dead weight nobody is going to close. The proxy now holds its handlers for as long as they run and cancels them at shutdown, which is what `Server.close_clients()` would do natively if it had not landed in Python 3.13 (Bambuddy supports 3.10). Both the snapshot path and the streaming endpoint go through the same shutdown. 7 regression tests, against a real TLS listener rather than a mock, since the bug is in socket teardown.
- **Deleting a print with no 3MF left its timelapse and its uploaded source on disk (#2968, reported by @ceasley)** — and logged the ordinary case as a security incident. An archive created without a 3MF carries an empty `file_path`, and both delete paths derived the directory to remove from that path: finding nothing, they removed nothing and wrote `SECURITY: Refusing to delete files for archive 7 - file_path is empty or invalid: ''` at ERROR. That was true when such an archive really was an empty row, and stopped being true once one could own files — `<archive_dir>/<id>/` holds its timelapse and finish photos, and `archive/no_source/<id>/` holds a source 3MF uploaded onto it afterwards. Neither was ever removed, so the row went and the video stayed. That is not a corner case on an H2-series or P2S printer, where a print sent from Bambu Studio *always* archives without a 3MF — it is most of the library, and the space it used never came back. Both are now cleaned up, but by different means, because `<archive_dir>/<id>` **shares a namespace with the per-printer folders**: a normal archive lives at `<archive_dir>/<printer_id>/<timestamp>_<name>/`, so `archive/1` is printer 1's folder *and* the directory the shared path helper hands archive id 1 — and archive ids and printer ids are small integers from unrelated sequences, so on every install the first few archives collide with the printers. A recursive delete there would take every print that printer ever made. So `archive/no_source/<id>/`, which is nested a level deeper under a name no printer id can take, is removed whole, while the id-named directory gives up only the files the row itself names — its `photos` subdirectory and its recorded video — and is then removed only if that left it empty, which a printer folder holding prints never is. Anything unrecognised keeps it alive and is left behind rather than guessed at. **The same collision is now refused for corrupted rows**: nothing one level under the archive directory is deleted at all, and since an archive directory has been two levels deep since the first commit, a `file_path` that has lost a path component can no longer point the delete at a printer folder. The shared `<base_dir>/photos` directory that every no-3MF archive once wrote into is never a candidate either, because removing it on one delete would take the others' photos. **Hard delete had its own copy of these rules** — the helper it was extracted from says in its docstring that it exists so the two cannot drift apart, and they had — so it now shares them, which also means it stops skipping the print-log thumbnail cleanup when a guard trips. The `SECURITY:` wording is kept for the two conditions that really are one, and both still remove the row so an archive cannot get stuck in the UI. 20 regression tests.
- **Every ffmpeg failure logged its build banner instead of the error (#2968, reported by @ceasley)** — ffmpeg opens each run with about twenty lines of version, build and library banner and prints its diagnosis *last*. Seven of the eleven places Bambuddy logs ffmpeg or ffprobe output kept the first 200 to 500 characters of that, so the banner survived and the error did not. The reporter's log carried twelve camera-capture errors and every one of them read `ffmpeg frame bytes capture failed (code 183): ffmpeg version 7.1.4-0+deb13u1 … built with gcc 14 … configuration: --prefix=/usr --extra-version=` — identical on every install, and silent about why the capture failed. The exit code was the only usable information in the line. The banner-stripping summariser written for the camera streaming endpoint (#925) now lives in a shared module and every ffmpeg and ffprobe stderr goes through it: snapshot capture, last-frame extraction, the layer-timelapse stitch, the archive's MP4 conversion, external USB and RTSP capture and streaming, and timelapse post-processing. It drops the banner, keeps the last ten meaningful lines — the error plus the input analysis that explains it — and leaves indented `Duration:` and `Stream #0:0` lines alone, since those are diagnosis rather than boilerplate. **Two things the scattered copies also got wrong.** ffmpeg echoes its input URL back in its error output, and seven of those call sites logged it without masking, publishing a printer access code or an external camera's password into a log file people routinely attach to public issues; masking is now part of the summary, applied to the whole string before anything is dropped, so a credential straddling the cut cannot leave its tail behind. And ten sites called a bare `.decode()` on bytes ffmpeg had copied stream fragments into, which could raise `UnicodeDecodeError` while reporting an unrelated failure — the summariser takes bytes and decodes them safely. A failure whose output was banner only now says `no diagnostic output` rather than trailing off after the colon, and the whole line is capped, since ffmpeg quotes back what the peer sent it. 20 regression tests, including one that fails if a twelfth call site starts truncating or decoding by hand.
- **Every print archived from a Bambu slice had no bed temperature, so preheat guessed one (#2989, reported by @senguendk)** — `PrintArchive.bed_temperature` was parsed by looking for a `bed_temperature` key in the project settings. BambuStudio does not write one: it stores a separate per-filament array for each plate type — `cool_plate_temp`, `eng_plate_temp`, `hot_plate_temp`, `textured_plate_temp`, `supertack_plate_temp` — and names the plate the project is sliced for in `curr_bed_type`. `bed_temperature` is the Orca/PrusaSlicer spelling, so the lookup matched nothing at all: **0 of 455 real 3MFs** on a live install produced a bed temperature, and every archive stored NULL. That is why preheat logged "archive has no bed_temperature metadata" on jobs sliced perfectly normally, and then heated the bed to the configured keep-warm temperature — 90°C by default — for prints that asked for 55°C. The extractor now reads the array the fitted plate points at, taking the first-layer value in preference since that is what the printer heats to before the print starts; the same 455 files now all resolve, across the four plate types they were sliced for. The plate names and the plate-to-key mapping are BambuStudio's own, so a plate a future release adds reads as unknown rather than silently taking another plate's temperature — as does `Default Plate`, which BambuStudio maps to no key. The per-filament array resolves to its highest entry rather than its first: the bed has one temperature and a 0 in that array means "this filament cannot print on this plate", so the first entry would record a cold bed for any project whose first filament is not one the fitted plate is heated for. An array that is all zeros is left unrecorded rather than stored as 0. Orca-exported 3MFs keep parsing through the generic spelling, which is now the fallback rather than the only thing tried. **Archives you already have are repaired too**: a one-shot pass at startup re-reads the 3MF still on disk for every archive whose bed temperature is blank, so preheat gets the right figure when you reprint an old job from the queue rather than only on new ones. It fills blanks and nothing else — a temperature already recorded is never overwritten, an archive whose file is gone stays blank, and a corrupted 3MF is skipped rather than failing the boot. The plate mapping is now shared between the ingest path and the repair so the two cannot read a 3MF differently. A dead copy of the old, wrong lookup that nothing called was removed at the same time, so it cannot be wired back up by accident. 36 regression tests.
- **A print archived without its 3MF never got its timelapse, and on a short print could be given somebody else's (#2957 follow-up, reported by @doncaruana)** — The reporter confirmed the #2957 archive recovery worked and then noticed the timelapse was not recovered with it, "even though it's there". `_capture_timelapse_baseline_at_start` says in its own docstring that it must be called from every `on_print_start` path that proceeds to a real print, and what breaks otherwise: the completion scan falls back to snapshotting the card *after* the printer has written the video, so the new file lands inside the baseline and no diff can ever match. `on_print_start` has three such paths and the no-3MF fallback branch was not calling it — nothing else covered the gap either, because `on_print_running_observed` is restart-recovery only and is suppressed whenever `on_print_start` fires. So every fallback archive reached completion with no baseline in memory and none on the row, and kept its timelapse only by accident. Not confined to the reported cool-off case: the same branch serves the internal-storage verdict, so every H2C/H2D/P2S print that Bambu Studio's Print button sends to eMMC lost its timelapse the same way, on a card that was holding it the whole time. Measured on a live install before the fix: 0 of 9 fallback archives had a baseline, against 73 of 275 normal ones. The branch now takes the baseline like the other two, placed last as they are so a slow card cannot delay the active-print registration, the energy reading, the archive-created event or the start notification ahead of it. **The second half is the short-print case.** Under the five-minute FTPS cool-off the card is still unreadable when the baseline has to be taken, and `list_files_async` answers `[]` when its connect fails rather than raising — indistinguishable from a card holding no videos. When the cool-off then expired inside the 900-second poll window, every video on the card read as new, the first in listing order won, and a stale unclaimed video was attached to this print and deleted off the printer. The empty baseline is still recorded rather than refused, deliberately: Bambuddy deletes each video once it is attached, so the usual card holds exactly one video at completion and an empty baseline resolves it correctly — refusing outright would have lost that common case to protect a rare one. Instead the scan marks such a baseline untrusted and the attach step declines to *choose* between several candidates, leaving them on the printer for the manual Scan for Timelapse button. Five regression tests covering both halves and the single-video case; full backend suite green (11230).
- **The print dialog named an AMS slot after the wrong spool** — The slot dropdown described every slot from the printer's own telemetry, and the printer cannot describe a spool it did not sell: a tray record has no brand field, `tray_sub_brands` is left empty for anything that is not a Bambu spool, and the colour is a bare hex the client resolves against Bambu's colour catalogue. A Devil Design PLA Basic Orange assigned in Bambuddy therefore read as "PLA (Sunflower Yellow)" — Bambu sell a Sunflower Yellow at the same `FEC600` — while the printer card, which reads the assignment, named it correctly. The two views now agree: `GET /printers/{id}/inventory-remain` carries each bound slot's brand, material, subtype, colour name and hex alongside the pooling key it already sent, and the dialog prefers that over telemetry, falling back field by field so a spool with no stored colour name still gets the catalogue lookup it had before, and re-reading it on every open so a spool assigned moments earlier is named correctly straight away. Resolved server-side, so internal inventory and Spoolman mode answer identically rather than the client re-deriving a rule that differs per mode. Matching is deliberately untouched and still runs on the printer's telemetry, so the auto-assignment and the colour-mismatch warning cannot start disagreeing with what the dispatcher does.
- **Every page was a blank white screen on iOS 16.0-16.3 (#2971, reported by @zevulos)** — An iPhone on iOS 16 loaded nothing at all: no error, no partial render, just white, over LAN IP and over an HTTPS domain alike, while the same install was fine on Android, macOS, Windows and Linux. The cause was one regular expression. `remark-gfm`, added in v1.2.5 for the folder README panel, reaches `mdast-util-gfm-autolink-literal`, whose module body contains a lookbehind assertion — `(?<=` — that Safari did not support until **16.4**. A regex literal is validated when its module is *compiled*, not when the function holding it runs, so this was never going to fail as a broken README panel: `FolderReadmePanel` -> `FileManagerPage` -> `App` is a plain static import chain, the regex landed in the entry chunk, and the browser refused to compile all 10 MB of it. Nothing executed, so nothing rendered. Every install from v1.2.5 onward has been unusable on those iOS versions, and v1.2.4 is the last release that loads on them. **The fix.** The panel now renders GFM through a locally composed plugin that registers four of `remark-gfm`'s five sub-extensions — tables, strikethrough, task lists and footnotes — and omits autolink literals, which is the only one that carries the lookbehind. Composing rather than configuring is forced by the nature of the bug: importing `remark-gfm` at all is what breaks the page, so no runtime option could have reached it. The visible cost is that a bare `https://example.com` or `foo@example.com` typed into a folder README no longer turns itself into a link; `[text](url)` and `<https://example.com>` are core markdown and still do. `remark-gfm`, `mdast-util-gfm` and `micromark-extension-gfm` leave the dependency tree, and the bundle is 23 KB smaller. **Why the build never said anything.** Vite's `build.target` governs syntax lowering, and esbuild does not rewrite regular expressions — measured here, a lookbehind builds silently under `safari15`, `safari16.0` and `es2020` alike, which is exactly how this shipped and then sat unnoticed for two months. So the guard is a real check rather than a compiler setting: `npm run build` now ends in `check-browser-baseline.mjs`, which scans the emitted bundles for syntax that Safari 16.0 cannot parse and fails the build with the offending snippet and the dependency-hunting command. It is deliberately scoped to *parse-time* failures only — a missing runtime API breaks one feature, while one of these takes down the whole app, and there is no graceful degradation to fall back on. Covered by seven renderer tests that pin both halves of the trade: each surviving GFM feature still renders, and the two forms of autolinking stay off on purpose so a future dependency bump cannot quietly bring the lookbehind back.
- **A failure reason the backend derived and the same reason a user picked counted as two different reasons (#2974, reported by @ojimpo)** — `failure_reason` was written in three vocabularies and nothing reconciled them in storage. The backend wrote English display labels (`"Layer shift"`), older builds of the archive editor wrote the *translated* label in whatever locale that user was running, and two stale-archive paths wrote English prose sentences (`"Stale - reconciled after reconnect, end time unknown"`). All three land in one column — the PATCH route has mirrored the field onto the latest print-log entry since #1444 — and the Failure Analysis widget groups on the raw value, so one real cause occupied several buckets. Measured on a live install before this landed: 91 rows reading `"User cancelled"` beside 1 reading `"userCancelled"`. In an English UI those render as the same words twice with different counts, which is why it went unnoticed; in any other locale one of the two stays English, because a stored label has no key for `t()` to resolve. The editor was worse than cosmetic about it: its reverse lookup compared the stored value against `t(...)` in the *current* locale, so for a non-English user nothing matched, the dropdown opened empty over an archive that plainly showed a reason, and saving from that state wrote the empty selection over the stored text. **One vocabulary now.** The keys were already canonical and already enforced — `_FAILURE_REASON_KEYS` in `api/routes/print_log.py` rejects anything else with a 400, and says why in its own comment — so this is `derive_failure_reason` being brought in line with a rule the rest of the stack had been keeping. `_HMS_FAILURE_REASONS` stores keys, the cancel branch returns `userCancelled`, and both stale paths write a new `noStatusUpdate` key rather than prose; which of the two stale situations occurred is already carried by `status`, so collapsing them loses nothing and gives Statistics one bucket instead of two untranslatable sentences. **Existing rows are converted**, which was the open question on the issue: a startup migration folds 168 historical labels onto the 12 keys across both columns. It is exact rather than a guess — every label across all 14 locales resolves to exactly one key, verified with no collisions — and the map is a frozen snapshot rather than something read from the locale files at run time, because it maps what was written historically and regenerating it would silently stop recognising the very rows it exists to convert. A value outside the map is deliberately left alone; guessing at it would be worse than leaving one honest string in its own bucket. The migration carries no one-shot settings flag on purpose: it only matches values in the map and a key is never a label, so it is self-terminating, and a flag would permanently skip anyone restoring an older database. **The editor no longer destroys what it cannot read** — an unrecognised value keeps its own option in the dropdown and survives a save, instead of initialising to empty and overwriting the stored text. Covered by 13 migration cases across both tables, including the live 91-vs-1 split, both stale sentences, free text left untouched, and running twice changing nothing; plus a test asserting every value the backend can derive is a key the rest of the stack accepts, so a display label cannot creep back into the map the way it did before. New `noStatusUpdate` label translated in all 14 locales.
- **Everything the internal slicer produced was Bambu green, whatever filament was picked (#2977, reported by @fadudba)** — A slice through Bambuddy's own slicer came out with `filament_colour = #00AE42` every time: a green plate thumbnail regardless of the profile chosen, and a **Color mismatch** in the Print dialog against the AMS slot the job had just been correctly mapped to. The reason is that a colour is not a property of a filament *preset* in either slicer — it belongs to the project, and their GUIs set it from the plate — so nothing was attached to the preset Bambuddy sent by name and the CLI fell back to its own compiled-in default, which is Bambu green. Verified against a 02.08.02.61 sidecar with the reporter's exact triplet: as sent, `['#00AE42']`; with a colour written onto the same profile, the colour asked for. Each filament row in the slice dialog now carries an editable **colour swatch**, and the colour reaches both `project_settings.config` and `slice_info.config`, which is what the thumbnail and the AMS mapping actually read. The swatch is pre-filled from the colour that slot was designed with — read from the source 3MF's own project settings — then the preset's `default_filament_colour`, then the slicer's green. It is offered on single-filament sources too, because an **STL, and equally a mesh-only 3MF exported from CAD, has no colour anywhere else to inherit**; measured, a colourless source records `color="#00AE42"` in its own slice info, so a fallback that read the *last sliced* colour rather than the *designed* one would have been circular. `default_filament_colour` is deliberately not treated as the answer on its own: the CLI never reads it — a profile carrying only that still slices green — it is consumed by the GUI when a project is created, so it is read and rewritten as `filament_colour`, which the CLI does honour. Bambu's bundled filament profiles define it nowhere at all (zero occurrences across the whole shipped tree), which is why it can only be one link in the chain. A slot the user did not touch and that has no designed colour submits an empty string rather than the swatch's displayed default, because a sent colour outranks the preset's own and pinning the placeholder would silently discard the real colour of an imported OrcaSlicer profile that carries one. Slicer Pipelines pick up the same chain without carrying a swatch of their own. The control sits beside the filament dropdown, styled like it and the same height, showing the swatch and its hex together. That placement is the third attempt and the first that reads as a control: a bare swatch in the label row looked exactly like the read-only dot multi-colour rows had carried for releases, and adding the hex beside it only made it look like a caption on the label &mdash; so on a single-filament STL, the one source with no colour to inherit and therefore the case the control exists for, nothing suggested anything was settable. The swatch and the hex are wrapped in one label bound to the input, so a click anywhere on it opens the picker rather than only a 16px dot being live. The colour is also painted on the input directly rather than relying only on the browser's native colour-swatch pseudo-element, since an unlit swatch is indistinguishable from no swatch at all. Translated in all 14 locales, wiki updated, and covered by 38 backend and 14 frontend regression tests.
- **A filament preset the slicer could not resolve was sliced as PLA at 200 °C without saying so** — Found while investigating #2977. Bambuddy names the preset to inherit and the sidecar resolves it against its bundled profile tree; when that tree does not contain the name, nothing rejects it. The CLI inherits nothing, falls back to its compiled-in defaults for every field, and returns a well-formed success — so a PETG preset whose name a sidecar image predates prints at PLA temperatures with no diagnostic anywhere. Measured against a 02.08.02.61 sidecar: an unresolvable name slices as `filament_type ["PLA"]` at `nozzle_temperature ["200"]` with `filament_ids [""]` and `filament_vendor ["(Undefined)"]`. Bambuddy now recognises that pair and logs a warning naming the slot and the preset that was picked, pointing at the sidecar image as the fix. The file is **kept rather than refused**, unlike the missing start G-code of #2838: this one prints, it is only wrong, and someone may well be slicing deliberately with a profile their sidecar predates — so the choice is theirs to make with the temperatures in front of them. Both signals are required together, which is what keeps it from firing on the two legitimate cases that look similar: a hand-written profile that simply never named a vendor still carries a real filament id, and a user's own cloud preset carries a vendor while legitimately having no bundled id.
- **An AMS slot card showed a multi-colour spool as one flat band (#2967, reported by @NeighborGeek)** — A Ziro "Colorful Mist" — yellow, cyan and pink, effect Tri Color — hovered on the printer card as a single pink rectangle, because a printer reports exactly one `tray_color` hex per tray and nothing else. Telemetry cannot describe a gradient or a surface effect and never will, so the header now paints the *spool's* own swatch whenever the bound spool carries extra colour stops or an effect, through the same builder the Inventory swatches use — the two surfaces cannot drift because there is one implementation. A plain single-colour spool keeps the flat colour it has always had, so the common case goes nowhere near the gradient path. Any stop at all counts, not just two: the colour layer ignores the base hex the moment stops exist, so a one-stop spool renders that stop rather than the slot's hex, and honouring it is what keeps the card agreeing with Inventory. The colour name and the print dialog's slot dropdown were the other two halves of the report and were already fixed on dev by #2875 and the slot-naming change that landed the day after it was filed. **Spoolman mode gained the gradient in the process**: Spoolman holds the extra stops in `multi_color_hexes` and the label renderer had been reading them for releases, but `_map_spoolman_spool` never returned them, so the identical roll registered in Spoolman rendered flat while the internally-managed one did not. Both now share one parser rather than reading the same field two ways. The asymmetry that remains is Spoolman's own and is pinned by a test rather than left to be rediscovered: it has no field for a surface effect — its only neighbouring field, `multi_color_direction`, describes how the stops are laid out, not that the roll is silk — so `effect_type` is None there instead of guessed at. The colour name moves onto the same scrim the vendor badge already uses once the background has more than one band, because a single hex cannot decide legibility across yellow, cyan and pink and the label sits dead centre where the background is likeliest to change under it; a single stop or an effect over one colour leaves a real base colour to test, and keeps the contrast rule it had. Wiki updated. 19 backend and 8 frontend regression tests.
- **A printer card said "Unknown stage (72)" where it now says "Preparing"** — New models report stage numbers before Bambuddy learns their names, and the H2C still has several. Until now those reached the card verbatim, as a number that means nothing to the person reading it, on a line that otherwise names what the printer is doing. Every stage that has turned out to be unnamed so far has been part of the run-up to printing, so an unnamed one now reads as "Preparing" — the same label stage 74 already carries, rather than a second spelling of the same idea. The substitution is display-only and deliberately not pushed down into `get_stage_name`: that function also feeds the stage-transition log line and the once-per-session warning that exists precisely to capture unnamed stages so they can be named in a later release, and there the number is the entire diagnostic value. Both paths are pinned by tests that assert they disagree for an unnamed stage and agree for a named one, so a future tidy-up cannot quietly collapse them and blind the thing that reports these. The idle sentinels (255 on A1/P1, -1 on X1) still resolve to no stage at all rather than being swept up as unnamed.
- **The internal slicer picked PETG for a PLA plate, and an A1 process for a P1S (#2982, reported by @Igiegel)** — Both traced to one line of the slicer sidecar: its bundled-profile listing read `filament_type` off the leaf preset and never reported `compatible_printers` at all. Measured against the shipped trees, the leaf read finds nothing — zero of the 1156 filament presets in OrcaSlicer 2.4.2 carry a material, and zero of the 1792 in BambuStudio 02.08.02.61 — because it lives one to four hops up the `inherits` chain (`Bambu ABS @BBL A1` → `Bambu ABS @base` → `fdm_filament_abs`). With no material on any of them the pre-pick had only colour and source to go on, so a white PLA plate drew `Bambu PETG Basic` on an A1 mini and `Bambu PC` on a P1S. The sidecar now walks the chain, which recovers the material for 1124 of the 1156 (the other 32 name a parent Bambu's own bundle does not contain, and stay listed with no material rather than being dropped). **`compatible_printers` is the second half**, and it is the only truthful account of which printer a preset belongs to: the bundle ships no process preset named after a P1S, an X1, an X1E or an H2D Pro — all ten of the P1S's are named `@BBL X1C` and name the P1S only in that list. Reading the printer out of the preset *name* therefore made a P1S look like it had no compatible process at all: all 198 were hidden behind “Show all” and the auto-pick fell through to an alphabetically-first `0.06mm Fine @BBL A1 0.2 nozzle` the CLI then refused with “the selected printer is not compatible with the process preset”. A P1S now gets the `0.20mm Standard @BBL X1C` it should always have had, and 73 filaments instead of 4. **This half needs the updated sidecar image** — an older one simply reports nothing and Bambuddy stays on the name matcher, degraded exactly as before rather than broken. Three hardenings ride along so a stale sidecar fails more gracefully: a filament preset that states a *different* material than the plate asks for is now skipped outright rather than merely scored down (a preset stating no material stays eligible — unknown is not wrong), a slot is no longer held on printer-compatibility alone once its material turns out to disagree (a preset you chose yourself is exempt — printing PETG on a plate labelled PLA is a legitimate thing to do), and a dropdown the printer filter would empty now shows everything instead, since a visible preset for the wrong printer can be changed and an empty list cannot. `filament_colour` stays null throughout, which is correct: no BBL profile carries a colour at any depth, because colour is a spool attribute rather than a profile one.
- **Every slice that didn't name its own process quietly got the slowest one the slicer ships** — Found while tracing #2982. Within a tier the preset list is alphabetical, and Bambu's naming puts the finest layer height first, so the auto-pick landed on `0.08mm Extra Fine` for an X1 Carbon and `0.06mm Fine` for an A1 mini. Correct presets, but nobody's idea of a default. Among candidates that are equally valid for the selected printer, the one nearest 0.2mm now wins — `0.20mm Standard` where it exists, the closest thing to it otherwise, ties breaking toward the coarser and therefore faster height. A preset whose name carries no readable height is still pickable when it is the only candidate, and a process the 3MF named still overrides all of this.
- **An H2D Pro classified every bundled preset as another printer's** — Also found while tracing #2982, and the same shape as the A1 mini's `A1M` rename (#1649): the bundle names H2D Pro presets `@BBL H2DP` while the printer preset, and the model registry with it, spells the model `H2D Pro`. The alias table now carries the pair. It stays deliberately narrow — `H2DP` and a plain `H2D` are still different machines and must not collapse.
- **Spoolman reset your renamed extra fields on every restart (#2983, reported by @ngreatorex)** — Bambuddy checked whether one of its four custom spool fields existed by calling `GET /field/spool/{name}`. Spoolman has never served that: its API declares only `POST` and `DELETE` at that path, so the check answered **405 Method Not Allowed** every single time and could never succeed. Each call then fell through to `POST /field/spool/{name}` — and that endpoint is an *upsert*, not a create. It answers 200 whether or not the field is already there, so a field you had renamed, retyped or given a default to in Spoolman's own UI was silently reset to Bambuddy's version of it, and an untrue `Created Spoolman extra field` was logged alongside. The reporter's log carried 60 of those lines in three days. Existence now comes from the documented `GET /field/spool` listing, matched on the field's `key` rather than its display `name` — a rename is the same field, and treating it as a missing one is what caused the overwrite. An existing field is left completely alone. **You can now rename these fields in Spoolman and the name will stick.** Registering all four also costs one request instead of four, and none at all on a client that has already looked once. If the listing can't be read at all, Bambuddy falls back to attempting the write exactly as before, so an unexpected Spoolman build is no worse off than today.
- **One ASA spool parked in the AMS added 20 minutes to every PLA print (#2886, reported by @FirstRulez)** — Preheat's chamber target was the maximum across *every loaded AMS tray*, with no reference to the job. The reporter's P2S holds PETG Pro, PLA, ASA and PETG; the ASA row of the filament map says 45°C, so a PLA-only plate was dispatched with `chamber_target=45°C`, the bed driven to 90°C to reach it, and the full 900s max-wait plus 300s soak burned before the upload even started — every time, because a P2S has no chamber heater and the chamber tops out around 33°C, so the wait can only ever end on the timeout. Their log carries fifteen of these. The intent was never in doubt: the resolution order documented one screen above reads "PLA-only print derives 0 → chamber phase auto-skips", but it was implemented as PLA-only **AMS** rather than PLA-only **print**, and only misfires on a mixed-material load. The derivation now reads the trays the item's `ams_mapping` actually names — the same array the print command puts on the wire, `[-1, -1, -1, 1]` in their case, addressing exactly the PLA slot — so the ASA two slots over contributes nothing and the stage skips outright. Multi-material prints are unaffected: the maximum is still taken, just across the trays the plate loads, so an ASA the print really does use is still the binding constraint. An item whose mapping is missing or still unresolved keeps the whole-unit scan, since that is the only signal left and narrowing to nothing would disable preheat for prints that need it. The bed hold between jobs (`queue_keep_bed_warm`) is gated on the same derivation and was holding beds at 90°C for the same wrong reason; it now reads the next item's mapping too. **The external spool is no longer invisible to this**: the scan only ever looked at `raw_data['ams']`, so an ASA print fed from the external feed derived 0 and got no preheat at all — a mapping that names 254/255 is now honoured, while an item with no mapping still derives from the AMS alone so nothing starts preheating that did not before. That covers the mappings Bambuddy builds itself, from the print dialog or the dispatcher's own matcher. It does not cover a mapping captured from a slicer through a Virtual Printer: BambuStudio writes the external spool as `-1` there, which is the same value it writes for a slot the plate does not use, so the two cannot be told apart. A wholly external one carries no usable mapping and falls back to the whole-unit scan as before; a mixed one derives from its AMS trays and the external half stays unread — which is exactly what it did before this change, since nothing ever read `vt_tray`. 29 regression tests, built from the trays and mapping in the reporter's own support bundle.
- **A spool you assigned to an AMS slot unassigned itself seconds later (#2987, reported by @frethop)** — and the slot's colour changed at the same time. It looked like Bambu Studio and Bambuddy fighting over the slot; the reporter's log shows Bambuddy losing to itself. P1S firmware 01.10.00.00 reads every **lowercase** hex letter in an AMS `tray_color` as a zero, and hides it completely: the command response echoes back the value you sent and reports `result: "success"`, so only the next AMS push reveals what was really stored. The spool-assign path sent `spool.rgba` verbatim, and that column stores lowercase — so `09ff00ff` became `09000000` on the printer and `ff5100ff` became `00510000`, while the one uppercase write in the same window round-tripped intact. That is the visible colour change. It is also what deleted the assignment: the auto-unlink sweep asks whether the slot still matches the spool it is assigned to, the mangled colour no longer did, and the assignment Bambuddy had created four seconds earlier was removed. Re-assigning could not help, because the **Configure Slot** dialog seeds its colour from whatever the printer currently reports — so it wrote the mangled colour straight back and cemented it, which is the loop in the report's steps 4 and 5. Colours are now uppercased at the single point the MQTT command is assembled rather than in each of the four routes that configure a slot, because a caller that forgets is exactly how this arrived. Nothing else about the command changes: no padding, no invented alpha, and `tray_type` / `tray_sub_brands` keep their case, where it carries meaning. **Two more things found in the same log.** A spool with a brand but no subtype was configured with the literal string `None` in its name — `"Sunlu PLA Matte None"` went on the wire, because the branded branch interpolated the subtype without checking it while the unbranded branch guarded it. And the FTP log is now readable: a `426` whose bytes Bambuddy has verified against the printer is how Bambu's FTPS normally ends a transfer, not a fault, so it is logged at INFO instead of WARNING. It fired 54 times in this one bundle, every single one followed by a completed upload, and it was burying the 26 TLS handshake failures in the same log that actually cost the reporter two prints. A `426` whose bytes do **not** verify is still an error and still fails the upload. 24 regression tests.
- **A manual K-profile calibration left a print in your archive** — Bambuddy already recognises the printer's automatic pressure-advance run, `auto_pa_line_calib_mode`, and skips archiving and notifying for it. Started by hand instead of automatically before a print, the same calibration reports under its own name with no `auto_` prefix — and manual flow dynamics has *two* shapes, a line and a pattern, so neither `pa_line_calib_mode` nor `pa_pattern_calib_mode` matched anything. Both arrive exactly the way the automatic one does — a bare subtask name with no `/usr/` path — which meant the archive path swept FTP for a 3MF that cannot exist and then wrote a no-3MF archive named after the calibration, on a printer that was in the middle of calibrating. Both are now on the same list, which is the one place both the print-start and print-complete callbacks consult. Matching stays exact after normalising path, suffix and case, so a file you deliberately named `pa_pattern_calib_mode_v2.3mf` — or your own `pa_bracket.3mf` — is still archived as the print it is. Wiki updated.
- **A K profile could be saved against the wrong hotend, and applied to the wrong one** — Which nozzle an AMS slot feeds, and how wide it is, was worked out independently in seven places, each reading the printer's first nozzle entry for every slot on the machine. That is correct on a single-nozzle printer and on a dual-nozzle printer with matching nozzles, and wrong the moment two sizes are fitted: the K profile for the other hotend was looked up, and with the per-model presets above the wrong preset would have been too. The resolution now lives in one place, and which array entry belongs to which hotend is no longer inferred — measured on an H2D fitted with a 0.4 on the left and a 0.6 on the right, the first entry reads the **right** hotend, so the array is indexed by extruder id. Separately, the spool form identified a chosen calibration by `cali_idx` alone, and the printer numbers its calibration table **per nozzle** — on a dual-nozzle printer the same index exists on both hotends meaning different things, so saving could persist the other hotend's K value and nozzle diameter. Each hotend is now keyed by printer, extruder and diameter throughout, which also lets a 0.4 and a 0.6 profile for the same hotend coexist — something both K tables could always store but the picker could not express. SpoolBuddy's write-tag page carried a verbatim copy of the same lookup and gets the same fix.
- **RFID auto-assign picked a K profile without checking which hotend it was calibrated on** — The first stored profile matching the printer and nozzle size won outright, with no extruder test at all. On a dual-nozzle printer a spool calibrated on both hotends therefore had a coin toss decide which pressure-advance value the slot got, on the path that runs unattended every time a Bambu spool is loaded.
- **Linking a Spoolman spool by tag configured the slot as generic filament** — That path resolved no slicer preset whatsoever and went straight to the generic material id, so a Spoolman spool with a preset set in inventory lost it the moment it was linked by tag. The same defect #1713 fixed on the assign path, in the function next door.
- **Moving an AMS to the other nozzle re-selected the K profile for the wrong one** — When a Filament Track Switch moves an AMS between inlets, the slot's K profile is re-selected for the nozzle it now feeds. It was resolved against the printer's first nozzle rather than the one the AMS had just been moved to, which on a machine with two different sizes fitted is the wrong nozzle by construction.
- **Reading a printer's calibration table could stall for 20 seconds** — H2-series firmware answers only the first one or two of a concurrent burst of calibration requests and silently drops the rest, each dropped request costing a five-second timeout before its retry: measured at 11 and 23 seconds on an H2C and an H2D for four parallel requests, against roughly one second sent in series. Sizes are now requested one at a time, while the printers themselves are read in parallel since separate machines are separate connections. An X1C answers all four at once, which is why this only ever surfaced on dual-diameter printers.
- **A batch order whose queued runs were deleted became a card that could neither be queued nor closed (#2960)** — An order queues the runs it owes by cloning an existing queue item for the same plate: that row is the only record of the printer target, AMS mapping, filament overrides and print options the user chose, and there is nothing else to copy them from. Deleting it left the order still reporting the run as outstanding, with **Queue remaining** answering "Plate 1 has no queued or finished run to copy settings from" every time, and no way out — the Cancel action was hidden unless the order had pending items to cancel, which by then it had none of. Queue a multi-plate file, change your mind, remove the rows, and the Batches tab kept a card that did nothing forever. Deleting an order's last surviving run for a plate now cancels it instead: a cancelled run does not satisfy a target, so the order still says it owes the print, and it can still produce it. That is the design the feature already documented for cancelled runs — the delete path simply never took part in it. A run that has *completed* is exempt and is still deleted outright, because rewriting a finished run as cancelled would falsify what the order actually produced, and a plate with any other surviving run is untouched, so this only ever engages on the last one. The queue and the Clear History action both say what happened rather than reporting a delete that did not occur. Independently of that, the card no longer offers actions that cannot work: the response now reports, per plate, whether anything remains to clone from, so a stranded plate explains itself instead of presenting a button whose only outcome is an error toast, and the header button offers only the runs that can actually be queued. Dispatching an order with one stranded plate now queues every other plate instead of aborting the whole order on the first one it cannot clone — an explicit single-plate request still fails loudly, and names the plate the way the Batches tab does rather than by a bare index. Cancel is offered for any active order, since closing one out is exactly what an order with nothing left pending needs. Existing stuck orders are not rewritten: they report honestly that their runs cannot be re-queued, and Cancel now closes them. Translated in all 13 locales, with backend and frontend regression tests including the delete-then-dispatch path this began as.
- **Picking a spool near the bottom of the label dialog could scroll the dialog itself out of view (#2918, found and fixed by @whitigol)** — The modal panel was `overflow-hidden` under a 90vh cap, which makes it a scroll container even though nothing was meant to scroll there. When a checkbox low in the spool list took focus the browser scrolled every scrollable ancestor to bring it into view, and the panel obliged by scrolling its own header and print buttons off the screen. It now clips instead of hiding — the same clipping, but not scrollable — so the only thing that moves is the spool list, which is the part that is supposed to.
- **A fully transparent spool printed a label with no QR code (#2918, found and fixed by @whitigol)** — The colour swatch is drawn from the spool's RGBA, and an alpha below opaque puts the PDF into a transparency state that was never turned off again. The QR code is drawn immediately after the swatch, before any other colour is set, so it inherited that alpha: a spool saved at alpha 0 produced a label whose deep-link QR was invisible, and therefore unscannable, while the rest of the label looked correct. The swatch now draws inside a saved graphics state so its transparency ends with it.
- **The K value on an AMS slot card went blank after a while, and came back after a backend restart (#2854)** — H2-series trays carry no K value of their own; they report a calibration index, and the number on the card is resolved from that against the printer's calibration table. The printer answers that query per nozzle diameter, and it answers whoever asks — BambuStudio's queries arrive on the same topic Bambuddy listens to — but every response was stored as though it were the whole printer's table. The nightly GitHub backup asks for 0.2, 0.4, 0.6 and 0.8 in turn and finishes on 0.8, which holds nothing on a 0.4-plus-0.6 machine, so the table was left empty and every K value on the card disappeared until something happened to refill it. Responses are now filed under the nozzle they describe, so an empty answer for a size the printer does not have clears only that size. The same change fixes the three spool-assignment paths that look a calibration index up by nozzle diameter and had been quietly finding nothing whenever the last response was for a different nozzle.
- **A slot could show the other nozzle's K value, and a nozzle that had been swapped out could keep showing its own** — Calibration indices are numbered per nozzle, so index 16 exists on each and means something different on each. The card's WebSocket updates keyed on the index alone, so whichever nozzle's table was read last won the slot; only the first render, which comes from a different code path, got it right. Both now resolve a slot through the extruder it feeds, and fall back to which nozzles are actually fitted when that is not enough to single one out. Where neither settles it the card shows nothing rather than a confident wrong number.
- **A fresh Bambuddy showed no K values at all until someone opened the Profiles page** — Nothing read the calibration table when a printer connected. It arrived by luck: a visit to Profiles or Configure Slot, a GitHub backup, or the printer answering somebody else's query. It is now read once per connection, asking only for the nozzle sizes actually fitted.
- **Turning Spoolman mode on deleted every built-in slot assignment, and turning it back off did not restore them (#2812, reported by @chitrangdesign)** — The toggle ran an unfiltered `delete(SpoolAssignment)` across every printer. Switching straight back cleared the *other* table instead, so the two directions were symmetric in code and one-way in effect, and the setting auto-saves on a 500 ms debounce with no save button and no confirmation. Opening the settings page to see what the option did was enough to destroy the configuration — the reporter's log shows four toggles in 85 seconds and the assignments never came back. The deletion had a real reason: checks that read both assignment tables would otherwise let a row in the mode you are *not* using answer for the mode you are, which is how #1473 was fixed. That reason has moved to where it belongs: every place that could be confused now asks which mode is active rather than reading whichever table happens to have rows, and nothing is deleted on a toggle. Each mode keeps its own assignments, so switching is reversible and inspecting a mode costs nothing. Six sites needed it, and only two are reads you would guess at. The per-slot K-profile lookup consults the built-in table first and, on a hit with no matching profile, deliberately stops rather than falling through to Spoolman, so a leftover row would have shadowed the Spoolman binding — the symptom #1556 reported from the other direction. Configuring a slot *writes* its K-profile against whichever table answers first, so the same leftover would have filed a calibration against a spool the printer is not using and never written the local one, leaving a calibration that appeared to succeed and then did not apply. And the auto-unlink pass that drops an assignment whose tray no longer matches its fingerprint ends in a delete: left ungated it would have removed the preserved rows one slot at a time as the AMS contents changed under the other mode, undoing the whole point of this more slowly but just as completely. The remaining two are the missing-assignment notification and the queue cost estimate. A sixth, the built-in remaining-weight fallback inside the Spoolman AMS sync, is deliberately left inert: it was unreachable while the table was being emptied, it is keyed by slot rather than by spool, and `create_spool` writes `remaining_weight` unconditionally, so waking it up would seed a stale figure into a brand new Spoolman spool. Existing installs need no migration: their inactive table is already empty, because it was being emptied.
- **A print that could not debit a spool said nothing about it (#2812)** — This is what turned the toggle above from an annoyance into lost filament. A print whose assignments existed at print start and were gone by the time it finished resolved its 3MF, read its per-filament grams, resolved its tray, and then skipped the debit because the row no longer existed — logged at INFO, invisible under the default log level, with the completion notification firing as usual. 65.49 g was never deducted and the reporter only noticed because a spool's remaining weight looked wrong. The skip is now a warning that names the grams, and a completed print that failed to charge a tray it drew from raises the missing-spool-assignment notification, not only the print-start check that runs before the job and was correct to stay quiet. The two are different statements — the first says the weight may not be tracked, the second says it was not — so a print warned at start may notify twice, which is the right trade. This is independent of the toggle and catches any other cause of an assignment disappearing mid-print.
- **Print cost ignored the linked Spoolman spool's price and always used the default rate (#2591, reported by @khaosdoctor)** — Spoolman holds per-spool pricing, and #261 gave that as the reason for integrating with it, but nothing ever read it. A print's cost is set once, at archive time, from the built-in Filament catalogue matched on the *primary* type, falling back to a global default rate — and in Spoolman mode nothing revisited that figure afterwards. The per-spool recompute that would have fixed it runs only over rows the built-in inventory writes, and Spoolman mode hands the usage tracker `spoolman_owns_usage` at print start so it writes none. On an install with an empty catalogue, which is what the reporter had, every print came out at the default no matter what the spool cost. Multi-material was wrong twice over: the primary type's rate was applied to the whole print's weight, so a slot of expensive PA was billed at the price of the PLA beside it. Each slot is now priced from the spool it was actually charged to, as the charge is made, and the per-slot costs are summed — which is what fixes the multi-material case rather than a separate change. The rate is the spool's own `price` when set, else the filament's, divided by `filament.weight`; that is the same net-grams field the remain%-delta path already divides by, so a spool that can be charged by percentage can always be priced. A missing or zero price is read as unpriced rather than free, and those grams — along with a tray that has no Spoolman row and any filament the sliced file never attributed — are covered at the default rate in one subtraction against the archive's own total, so a partially priced print still reports a whole-print figure instead of a fraction of one (#1344 in the other inventory mode). Only the first run writes the archive's cost, matching the built-in writer (#1378). Pricing is applied even when the slot-to-tray mapping was a positional guess, unlike the colour and material rewrites beside it: those overwrite what the slicer recorded, whereas the grams have already been deducted from these spools and the archive should say what that deduction was worth.
- **A rescan or a cost recalculation quietly replaced a Spoolman-derived cost with a default-rate one** — Both rebuild an archive's cost from the built-in inventory's usage rows and fall back to the catalogue or the global default when there are none. In Spoolman mode there are never any, so the fallback was not a recalculation but a downgrade, and it would have undone the pricing above on the next rescan. The spool-to-slot resolution a price is derived from only exists while a print is being completed and cannot be rebuilt from the archive row afterwards, so both now leave a cost alone rather than replacing it with a worse one, and the bulk endpoint reports how many it kept. An archive that has no cost yet is still priced, and with Spoolman off both behave exactly as before.
- **A print sent from Bambu Studio charged the wrong Spoolman spool, and rewrote the archive to match (#2953, reported by @bitelvl1)** — A sliced file numbers its filaments 1..4; which AMS tray each came from is decided when the job is sent, and #2768 gave the Spoolman writer two ways to recover that decision when the print did not come through Bambuddy: the printer's own `mapping` field, and a colour match of the 3MF's slots against the loaded trays. An A1 can satisfy neither. It publishes no `mapping` field, and it drops the MQTT connection when Bambuddy subscribes to its request topic, so the slicer's instruction never arrives either — which leaves the colour match, and that compares hex strings exactly. The reporter sliced with a generic black profile against a tray they had set to #111111. No match, so every print fell through to the positional default and charged slot 1 to whatever sat in the first tray: 2.17 g onto a grey PLA+ spool, while the print was fed from tray 3. The printer had already said so. `Tray change during print: tray=3 at layer=0` is in their log, recorded 90 seconds in, and read further down the same completion pass to decide which slots the print had touched — the same pass then charged tray 0 on a guess. A single-slot print is now pinned to the tray the printer reported feeding from, using the ladder the built-in inventory writer has consulted all along: the mid-print tray-change log, then the tray loaded at print start, then the current one, then the last real tray seen. Spoolman users were the only ones not getting it, which is why an install with the internal inventory in use never showed this. Gated on exactly one slot with usage, because a multi-colour print moves `tray_now` on every change and one reading cannot then be attributed to one slot; and it declines when the log holds more than one switch, so an AMS-backup runout still splits per segment (#1793) rather than landing whole on one spool. Where nothing at all names a tray the positional default still stands — it is right for an AMS loaded in slicer order — but it now says so at warning level, and no longer restamps the archive's filament colour and material from a spool it picked by position. That restamp is what made the fault look like data loss: the grams can be put back, whereas overwriting what the slicer recorded leaves nothing to compare against, and the reporter's archive had already been rewritten from #000000 to the wrong spool's grey.
- **One unexplained disconnect could stop a printer reporting slicer print mappings for good** — Bambuddy subscribes to the printer's request topic to intercept the mapping a slicer sends with a print. Printers that refuse kill the TCP connection instead of returning a SUBACK failure, so the only signal is "we subscribed, then got disconnected", and that was believed the first time it happened. Every other reason a connection drops inside the same few seconds looks identical — a network blip, the printer rebooting, the container being stopped mid-probe — and the verdict was cached per serial with no re-probe anywhere, so on a printer that supports the topic perfectly well a single unlucky drop cost mapping capture for the rest of the process, and every Studio print after it was charged to a spool picked by tray position. The subscription is now retried once before being written off, and a disconnect Bambuddy asked for is not counted at all. A printer that genuinely refuses answers the same way every time and pays one extra reconnect; nothing changes for one already known to refuse, which still skips the subscription outright rather than reopening a reconnect loop.
- **The AMS temperature alarm fired hourly on ambient room heat, and silencing it cost the colour band (#2905, reported and contributed by @ojimpo in #2943)** — `ams_temp_fair` decides when the AMS card turns amber, and it decided when a notification was sent as well. 35 °C is a reasonable place to change a colour and a low place to page someone: an AMS in a room without air conditioning sits above it on ambient heat alone, so the alarm repeated every hour for as long as the weather lasted — with every heater target at zero and humidity inside the good band — and the only way to stop it was to raise the display band and lose the red that says the unit is warm. "Red above 35 °C, notify above 45 °C" was not expressible. A new **Alarm above** field under Settings → AMS Display Thresholds separates the two. It is nullable and unset resolves to the fair value, so an install that never touches it behaves exactly as it did and there is no migration — the field is a row in the existing key/value settings table, not a column. Deliberately not a per-filament map like the humidity thresholds: that map exists because humidity also decides when a drying cycle starts and PLA, PETG and PA want different targets, whereas ambient heat does not care what is loaded, so a per-type map would only help someone who set every type to the same number. Three call sites take the new value, not one. The comparison is the obvious one; the second is the drying latch, which releases once the unit reads back at or below the threshold it was given, so handing it the display band stranded the latch on any unit that settles above it — an AMS resting at 37.7 °C never returns under a 35 °C band, so the hold placed during a cycle could only expire on its grace cap instead of releasing when the unit had actually cooled. The third is the number the notification quotes, or the message reads "> 35 °C" while firing at 45. A non-positive or non-finite value is refused rather than honoured, which matters more than it looks: nothing is ever greater than NaN, so a value that failed to parse as a real number would have silenced the alarm permanently — the failure mode that looks exactly like a working configuration. The field shows the fair threshold as its placeholder so the fallback is visible without reading docs, says so when a value it cannot use is entered, and the temperature block gains the disclosure line the humidity block has had all along: only the alarm threshold notifies, Good and Fair colour the display, and leaving it empty alarms where it always did. The background task that dispatches these alarms is a no-arg infinite loop and had never been covered by a test; it is now driven end to end, pinning that an install with no value set still fires and quotes 35, that a stored 45 is both what fires and what the message says, and that 37.7 °C in a warm room sends nothing.
- **A clear spool synced to Spoolman as pure black (#2912, reported and contributed by @ojimpo in #2924)** — The AMS reports a translucent roll as `00000000`, and every write to Spoolman truncated that to six characters before storing it, so a PETG Translucent spool arrived as opaque black and the external catalogue then named it "Black". Spoolman's own schema accepts eight characters, so the value Bambuddy was discarding was one the backend would have taken verbatim. #1545 fixed exactly this for the built-in inventory and left the Spoolman path behind, which is why internal mode has been storing the alpha correctly for months. The read side was the matching half: it rejected anything that was not exactly six characters, so fixing the writes alone would have turned clear spools grey instead of black. Eight characters are stored only when the alpha byte says the filament is genuinely translucent — passing everything through would rewrite the colour of every opaque spool on its next touch, churning records in people's Spoolman for no benefit. Colour comparisons now key on the shape a value would be stored as, so two colours match exactly when storing them would produce the same value. That is what keeps the widening safe in both directions: an opaque tray still finds the six-character filaments every existing instance is full of, so no upgrade mints a duplicate for every spool on the next sync, while a clear roll gets its own record instead of being conflated with the black one of the same RGB. The edit route compares the same way, so a no-op edit no longer PATCHes the filament on every save and an alpha-only edit still reaches Spoolman. One consequence is worth stating: a filament already stored wrongly-opaque by this bug gets a second, correct record the next time that roll is auto-added, rather than the old one silently capturing every clear spool that follows.
- **Translucent spools showed as an empty circle or as solid black in four more places** — The swatch helper had two answers, the transparency checkerboard for a fully clear colour and a flat fill for everything else, so a half-translucent spool rendered identically to an opaque one. The AMS tray swatches never reached that helper at all: Assign Spool painted the reported colour directly, so a clear tray was an invisible circle, and Configure AMS Slot cut the alpha off first, so a clear tray was solid black — the same symptom as the sync bug above, in the UI, and present regardless of which inventory mode is in use. All of them now draw through one helper, which lays a partly translucent colour over the checkerboard so the swatch shows both the tint and that it is see-through.
- **Every notification provider vanished from the list after the inventory toggles were wired up** — Adding `on_stock_reorder_alert` and `on_stock_break_alert` to the provider schema made them required on the way out as well as the way in, because the response model inherits the write model. Every `on_*` column on `notification_providers` is nullable with no server default, and on an install where the table had already been created from the ORM metadata before migrations ran, the `ALTER ... DEFAULT false` that introduced those two columns was swallowed as a duplicate and never backfilled the rows that were already there. Those NULLs sat harmless for as long as nothing read them; the moment the flags were declared on the response, the row failed validation, and since a list is validated as a whole, one such row took every provider down with it. The API returned a 500 and the UI rendered what it was given — an empty list — so correctly configured providers looked deleted while sitting untouched in the database. They are backfilled to off on the next start, matching what the sender already did with them: it selects providers with `IS TRUE`, so a NULL flag never sent anything. A NULL flag now also reads as off rather than failing the response, so the next flag added to that schema cannot repeat this.
- **Two inventory notification toggles could never be turned on, so stock alerts have never been able to fire** — `on_stock_reorder_alert` and `on_stock_break_alert` exist as columns on a notification provider, have their own templates, and `notification_service` looks providers up under exactly those names before sending. The whole UI is there too: a toggle in Add/Edit Notification, a badge on the provider card, the field in the API client's types, and tests for all of it. The one thing missing was the schema. `NotificationProviderCreate`/`Update` never declared either field, and Pydantic drops what it does not declare, so every request that carried them came back `200 OK` with the row unchanged — and `_provider_to_dict`, which is a hand-maintained field-by-field map, never returned them either, so the toggle read back off no matter what the database held. Nothing errored anywhere along that path. Both directions are wired now, and the round-trip tests that already covered the Home Assistant toggles cover these too, because the failure is structural rather than particular to one field: any column missing from those two maps is invisible to a test that builds providers through the ORM, and only a create-then-re-read through the route catches it. This makes the setting stick and report itself honestly; the detection side that would *call* those two senders does not exist yet, so turning them on does not yet produce notifications.
- **One Home Assistant sensor reporting a long text state could stop every printer sensor from updating** — `last_state` is a 64-character column, and the poller wrote whatever Home Assistant returned straight into it. A numeric entity that starts answering with free text - an enum, an error string from a template sensor - overflows that. SQLite stores it regardless, which is why this stayed quiet, but PostgreSQL rejects the row, and a poll pass commits every sensor at once: one such entity took the whole batch down on every tick, so no printer sensor's reading, timestamp or alert state advanced again, and the print interlock kept deciding against a frozen picture. What is persisted is now cut to the column, while the cached reading keeps the full state for display. The comparison that decides whether the state changed is made against the cut form too - comparing the stored value against the raw one would read as a difference on every single poll and churn `last_changed` forever. The storage-location poller was fixed the same way in the same release; both now go through one helper, each passing its own table's width.
- **Configure Slot could bind the default K value for a profile the picker was visibly showing** — The AMS slot dialog sends `cali_idx` from `selectedKProfile`, which the mutation read through its own closure. React Query hands a mutation its options from an *effect*, so a click landing between a commit and that effect flushing runs the previous render's function - one that captured the selection as it was before the K-profile query resolved. The result is `cali_idx: -1`: the printer binds the default 0.020 rather than the calibrated K, while the dialog shows the right profile selected the whole time. It surfaced as an intermittent failure of the per-nozzle K-profile test, roughly one full-suite run in six, and reproducing it with staggered query resolution showed the divergence directly - the select element held the correct profile immediately before and after the click, and the payload still carried -1. That test's slot is the most exposed case in the file, a right-hotend slot carrying the left hotend's index, where the "keep showing the active profile" safety net cannot repair an empty recompute. The mutation now reads the selection from a ref written during render, so it resolves at execute time rather than at capture time; the same applies to the K value and the profile's ids, which travel in the same payload and had the same exposure. Measured over 27 runs of a staggered-resolution grid: 2 failures in 15 before, 0 in 12 after. The modal's printer-model query was also missing from the test file's mock, so it ran with no query function and rejected on every test in it - mocked now, though on its own that changed nothing, which is how the ref was confirmed as the fix rather than assumed.
- **A print started from the printer's own screen swept every FTP path, archived blank, and then blamed a slicer setting (#1820, reported, captured and re-measured across four daily builds by @ojimpo)** — `current_project_url` was assigned in exactly one place, `_handle_request_message`, and that runs only for the request topic. A print started from the touchscreen publishes nothing there, so the field stayed empty for the one case the storage verdict exists for: the file is already in the printer's own model library under `/userdata/model/history/`, and port 990 does not serve it. The verdict then fell through to the `sdcard` flag — which @ojimpo's H2S reports as true, its "card" being the internal eMMC — so every such print ran the full sweep before giving up: 16 filename-and-directory attempts over 22 FTPS connections, 18 of them refused, 6.4 seconds, then a fallback archive with a name and nothing else. The printer does announce where the file lives. It arrives as an unsolicited `project_file` **response** on the report topic about two seconds before `gcode_state` reaches PREPARE, and Bambuddy now reads the `url` off it, gated on `result: SUCCESS` and a non-empty value so a refused dispatch cannot name a file that was never written. Reading it there rather than only at the request topic also covers an install nobody had in view: some brokers refuse the request-topic subscription, and on those no print of any kind had ever populated the field. Our own dispatch is echoed on both topics, so the new branch captures state and nothing else — the "external dispatch" diagnostic stays with the request-topic handler, which sees the echo first, and reusing it here would have logged every Bambuddy-started print as somebody else's. What the print names is now what gets tried: the five directories a copy could be in, rather than the ~110 connections that cannot succeed. That copy is worth trying, because an H2S keeps recently used jobs under `/cache` and archives them in full while they last; roughly eight files later the same job archives with a name only, which is exactly what @ojimpo measured on two prints the same day. Nothing about slicer-sent prints changed. **The banner that appears afterwards no longer describes a step that never happened.** With no reason recorded, a blank archive fell back to the original wording — "Store sent files on external storage" is off in your slicer, go and turn it on. On the reporter's printer that setting is on, and the internal-storage wording added in #2780 already explains why it would not help on an H2 anyway, so the archive that most needed that explanation was the only one that could not be given it. Prints started from the screen, from Handy, or by picking a file the printer already had now carry a reason of their own and their own wording: no slicer was involved, nothing was sent, and no setting changes it. What can be done instead is offered in its place — start the print from Bambuddy, or read the sliced weight off the printer's own file browser and enter it under **Filament used (g)** in Edit Archive, which the cost and the Projects totals then follow. Settings > Printers > Connection Diagnostic reads the same reason rather than a fixed one, so the two surfaces cannot end up giving the same printer different advice.
- **A print that started during an FTPS pause was archived empty forever, even after Bambuddy downloaded the file (#2957, reported and diagnosed by @doncaruana)** — A failed TLS handshake puts a printer's file service in a five-minute pause, and the archive flow checks that pause at the top of its path loop and gives up before opening a connection. @doncaruana's P1S started a print inside one: Bambuddy wrote an empty fallback archive 13 milliseconds after print start, having never touched the network. Four minutes later the pause cleared, the cover endpoint downloaded the very same file — all 8,956,942 bytes — parsed it, took the plate-2 thumbnail out of it, and published it to the shared 3MF cache under the exact key the archive flow looks up. Nothing ever looked. All three readers of that cache run before or during the print-start handler that had already given up, and print completion drops the cache as its first act, deleting the file. So the archive stayed a shell — no thumbnail, no file size, no filament, no layers — for a print whose source Bambuddy had held, parsed and indexed, and there was no path in the codebase by which a fallback archive could ever become a real one. Two things change. A 3MF that arrives later is now offered to the running print's archive, which fills the existing row in place rather than adding a second one — the row's id is load-bearing, with the energy reading, the timelapse session and the start notification all written against it. That covers this report at no network cost, because opening the printer card already downloads the file to draw its thumbnail. And a fallback created *because of* the pause now schedules its own bounded retry, spending the cache first and the printer only if that misses. The retry is deliberately not scheduled for the other reason an archive comes up empty: a print the printer kept on internal eMMC has no FTPS copy to come back for, and retrying it is the sweep that was removed in #2780 — so the two causes are now recorded separately instead of both landing as "no 3MF". Recovery refuses anything that is not a readable 3MF, since a truncated download would replace an honest empty archive with wrong metadata, and leaves an archive alone once it has a real file. The last opportunity is taken too: print completion spends the cache on a still-empty archive before evicting it. Wiki updated.
- **A printer whose failure detection was not working showed a green "Safe" badge (#2952, reported via in-app bug report, with a full ML API and Bambuddy log correlation)** — The printer card's AI badge collapsed every class that was not Warning or Failure into green **Safe**, and the service reported `safe` whenever it had no verdict to give. The state entry is created the moment a monitored print is seen, which is before the first snapshot and well before the first inference, so a rejected ML API token, an unreachable ML API, a camera that never yielded a frame and an unset External URL all rendered identically to a healthy watched print: a green pill reading Safe at score 0.000. For a safety feature that is the worst available failure mode — it asserts the print is being watched at exactly the moment it is not. The reporter read that badge, concluded the detection loop had never started, and spent an evening ruling out the network path; the loop had in fact been calling the ML API every ten seconds the whole time and being turned away with a 401. What hid it is that Obico's auth layer rejects a bad token before its own request log records anything, so a token problem and a service that never runs leave the same trace in the ML container: nothing. Successful checks log nothing there either, which leaves the container log unable to distinguish working from broken in either direction. The badge now has two more states and tells the truth in both: **Not checking** (amber) when the last check produced no result, carrying the reason — rejected token, unreachable API, failed capture, missing External URL — in the tooltip and the modal, and **Starting** while a monitored print waits for its first result. Score and frame count are withheld while a printer is not being checked, since 0.000 next to "Not checking" reads as a measurement rather than the absence of one. The reason is tracked per printer rather than service-wide, so on a multi-printer setup a card names its own problem instead of whichever printer failed most recently; it stays behind `settings:read` because it can quote configured URLs, while the badge state itself does not, because whether a print is being watched is not configuration. An unrecognised class from a future backend now falls back to **Starting** rather than **Safe** — the fallback that caused this. Also fixed alongside: **Test Connection** now saves the form before probing, so a green "reachable and healthy" always describes the configuration the detection loop is actually running with rather than what is typed in the boxes. The wiki's badge table and troubleshooting section are updated, including the ML API container log being unable to answer this question.
- **Bambuddy could not start against a PostgreSQL server whose messages are not in English (#2949, reported and diagnosed by @dvb6666)** — @dvb6666's Debian PostgreSQL 15 answered the first migration statement with `столбец "parent_run_id" отношения "pipeline_runs" уже существует` and startup aborted. The column already existing is the *expected* outcome there: `create_all()` builds the tables from the models before the migration list runs, so on a fresh database essentially every `ADD COLUMN` in that list is a duplicate by design, and all 382 of them relied on the runner recognising "already applied" and moving on. It recognised it by searching the error text for `already exists` — but PostgreSQL renders its messages in the server's own `lc_messages` locale, and a Russian server does not say that. So the very first statement was re-raised as a fatal error. This was never specific to `parent_run_id` or to one PostgreSQL version, which is why @dvb6666 got the identical failure after moving from 15 to 18: no PostgreSQL server outside an English locale could start Bambuddy at all, fresh install or upgrade, and the failure surfaced as a schema error rather than as anything pointing at the language. Idempotency is now decided by SQLSTATE, the five-character code PostgreSQL never translates — `42701` duplicate column, `42P07` duplicate table or index, `42710` duplicate constraint or trigger, `23505` duplicate key. The narrowing that was already there is kept and now rests on a code rather than a phrase: a missing column counts as "already applied" only for `RENAME COLUMN`, so a column missing during `ADD COLUMN` or `CREATE INDEX` still aborts startup instead of quietly hiding a corrupt schema — as do a missing table, an unknown column type, and a syntax error, each verified against a live server. SQLite keeps the text match, since its driver publishes no SQLSTATE and it never localises its messages. The same treatment went to the second place that read message text, the OIDC auto-link safety constraint, where a mistranslated "already exists" would have failed startup on the same servers. Measured rather than reasoned about: against PostgreSQL 15 under `ru_RU`, `en_US` and `C`, a full `init_db()` completes on both a fresh database and a re-run, and the schema the Russian server ends up with is byte-identical to the English one — nothing is being silently skipped to make startup succeed.
- **A test in the plug-energy suite failed for 31 minutes of every day (#2938, reported and measured by @ojimpo)** — `test_nothing_derivable_before_the_first_midnight` passed for 23.5 hours a day and failed for the other half hour, which is the shape that reads as ordinary flakiness and gets re-run rather than fixed. @ojimpo hit it running the full suite for an unrelated PR at 22:10 UTC, stashed his branch to confirm it reproduced on clean `dev`, then measured the window minute by minute against the real day boundary instead of guessing at it. **The test's premise, not the product.** It asserts that nothing can be derived when a plug's only snapshot was taken *after* this local midnight, and it placed that snapshot at a raw wall-clock offset — `now - 30 minutes`. The comment beside it, "taken this morning, after midnight", is the premise, and it is only true away from the boundary: for the first half hour of each local day, `now - 30 minutes` lands *before* local midnight, where it is a perfectly good baseline. `_counter_at` finds it, and `today` comes back `103.5 - 102.0 = 1.5` instead of `None`. The window is local 00:00–00:30, which is 22:00–22:30 UTC while CEST is in effect and 23:00–23:30 under CET — it moves with DST, because the module pins `Europe/Berlin` in an autouse fixture and an outer `TZ` makes no difference to it. **`derive_today_yesterday` is right and unchanged.** A snapshot from before local midnight genuinely *is* a valid baseline for today, and the production code treating it as one is the documented behaviour, so nothing here reaches a running install. The snapshot is now anchored to `local_day_start(now) + 30 minutes`, which is the idiom the file's other nine snapshot writes already use and the reason none of *them* could drift — this was the only one that offset from the wall clock, and the only one that failed. Verified by replaying 5760 minutes across four days including both DST switch days: the old expression fails 31 minutes per day, the new one fails none. **Scope.** One test file. No product code, no DB migration, no schema change, no permission, no i18n change.
- **The slice dialog took settings from the file with "Use the file's built-in settings" switched off (#2942, reported by @zevulos)** — Two separate features read as one. The checkbox slices a 3MF the way its designer set it up, ignoring the picked profiles; the per-option "from file" ticks beside each setting carry the designer's individual deviations onto the profile you picked (#2622), and those arrived pre-ticked whatever the checkbox said. So a slice run deliberately *without* the file's settings still took sixteen values out of it — the reporter's own log names them, `enable_support` and `support_type` among them, landing on a process preset they had chosen on purpose. The ticks now follow the checkbox: off, nothing comes out of the file until it is asked for by name; on, every setting the file changed shows ticked, because on that path the file really does drive the whole slice. Taking the designer's work in bulk is still one click, from a line at the top of the settings panel that says how many settings the file changed — and it still leaves the machine-tuned ones and the two that *are* the picked preset for a per-key decision, which is the classification #2622 made and this does not widen. Two things underneath had to change for the checkbox to mean what it says. The panel greys out options the slicer's own rules switch off, and it was evaluating those rules against what the user had typed alone, falling back to the compiled-in schema defaults for the rest — so a preset with supports on read as `enable_support: false` and greyed out the whole Support page while the slice ran supports. A greyed row greyed its tick too, which is how the reporter's screenshot shows a support type marked "from file", applied to the slice, and impossible to clear. The rules now see what the slice will actually run with: the preset's values, the file's values for the keys that are on, and anything typed on top. And the tick is no longer gated on the slicer's rules at all, because it answers a different question — not whether an option is in play, but where its value comes from. Separately, the support carry-over from #1881 ran underneath the ticks entirely, lifting four support keys out of any 3MF that had supports on, with nothing on screen to decline. It now stands down for the keys that were offered and turned down, which the request can say for the first time: an empty `design_overrides` list means the caller was shown the file's settings and took none, where no list at all is a caller that predates the choice and keeps #1881 whole — as do sources that record no deviations to tick, an OrcaSlicer export among them. Covered by backend and frontend tests, and measured against the reporter's own sixteen keys. Note the practical change: a MakerWorld file with supports enabled no longer switches supports on for you — tick **Enable support** in the panel, or the checkbox above it, if that is what you want.
- **A colour mismatch was reported between two filaments the app itself called "Blue" (#2941)** — The print dialog compared a slicer profile's near-pure `#0028FF` against the Bambu navy `#0A2989` loaded in A4 and correctly said they differ: 118 apart in the blue channel alone, a CIEDE2000 distance of 15 where 1 is a just-noticeable difference. Nothing in the dialog said so. A hex that misses the colour catalogue is named by a coarse family bucket, so both sides resolved to the name "Blue", and the warning sat between two identical labels with no way to tell what it was objecting to — the reporter read it, reasonably, as the matcher being broken. Where both sides of a mismatch carry the same name they are now qualified by their hex, and the tooltip names them together: "Same type, different color: needs Blue (#0028FF), slot has Blue (#0A2989)". Names that already differ are left alone, since the hex is noise once the words separate them. The comparison itself is untouched — it was right, and its tolerance is not the kind of thing to widen on a single report: admitting a difference that large would start matching navy to cyan, and the eligibility rule is shared with the queue scheduler, which would then dispatch on it. The panel's own status line, the required-filament tooltip, the auto-matched/manual marker, the slot placeholder and the type-not-found message were all hardcoded English; they are translated now, in all thirteen locales, and two of them turned out to have had translations sitting unused in every locale file the whole time.
- **A print that failed on an `hms[]` fault recorded an unlookupable error code** — The queue's failure reason is built by formatting the fault's module and error into `MMMM_EEEE`, and that one derivation never masked the error to 16 bits. A fault arriving from the printer's `hms[]` array carries its alert level in the code's high half, so the label came out as e.g. `0500_3000A` — five digits in a group that has four. It is not a code the user can look up on Bambu's HMS index, and because it matches no catalogue key the sentence explaining the failure was dropped along with it, leaving the bracketed number alone. The nozzle-size mismatch behind #1111 is exactly such a fault: it reads as `[0500_4038] The nozzle diameter in sliced file is not consistent...` when the printer reports it one way and read as a bare `[0500_24038]` when it reported it the other. There was already a helper that gets this right and is used by the archive's own failure-reason lookup; the queue's now calls it instead of keeping a fourth copy of the derivation.
- **AMS slots were offered as places to store a spool** — The Storage Location dropdown in the spool editor listed entries like "H2D-1 - AMS A1" alongside real locations, and they could not be removed. They are not locations at all: Bambuddy used to record which slot a spool was loaded into by writing that string into Spoolman's `location` field, and although that writer went away when Storage Location became something the user picks, the strings stayed on people's Spoolman spools — where the location sync, which imports every distinct one it finds, has been reading them back ever since. A printer slot is where a spool is loaded, not where it is put away, and Bambuddy already tracks the first through slot assignments. Deleting one by hand did not work either, which is what made this a dead end rather than an annoyance: the delete route refuses a location that has spools, and in Spoolman mode it counts them by matching that same string, so every marker still sitting on a loaded spool answered 409 — and the two that were empty came back on the next sync a minute later. The import now skips them, and the ones already in the catalogue are removed on upgrade. The filter is deliberately narrow, matching only the shape Bambuddy itself wrote — an optional printer-name prefix followed by `AMS A1`, `AMS-HT A1` or `External Spool` — so "AMS Drybox" and "Spare AMS trays" are left alone; anything it swallowed would be a place the user could no longer file a spool under. A row is only removed when no spool in Bambuddy's own database points at it, by id or by legacy free-text name, so an internal-mode user who has deliberately filed spools under such a name keeps it. Spools in Spoolman are not touched: their location strings are the user's data on the user's server, and one that still reads "H2D-1 - AMS A1" in the inventory list is telling the truth about what Spoolman holds — it simply stops being offered as a destination.
- **A wood, silk or gradient roll the AMS added for you was drawn as a flat disc** — A spool's swatch is composed from `effect_type` and `extra_colors`, and the RFID auto-add set neither. It reads the colour catalogue to name the colour and took the name alone, even though the row it had in hand also carries those two columns — the spool form's own colour picker hands both to a spool a user adds by hand, so the same roll rendered one way when you typed it in and another when the printer identified it for you. Both columns now travel with the name. That alone would have changed nothing on a stock install, because the shipped catalogue carries an effect on none of its 600-odd rows, so the subtype is read where the catalogue has none: it is already derived from what the printer reports, and the two vocabularies line up — Wood, Silk, Sparkle, Marble, Glow, Galaxy, Metal, Rainbow, Translucent, Matte, and the Gradient, Dual Color and Tri Color that the M*/T* colour codes upgrade a subtype to. "Silk+" is read as Silk, since the plus is on the product name rather than the finish. A subtype that names no effect — Basic, Tough, CF — leaves the column empty rather than inventing an overlay, and a value already set is never overwritten, so the column stays what it is documented to be: a rendering hint the user can override without touching Bambu's categorical label.
- **Every Bambu RFID spool was added with the wrong empty-spool weight (#2909, reported and fixed by @ojimpo in #2923)** — A Bambu roll arrives on the 250 g Low Temp spool, but the lookup that gave an auto-added spool its `core_weight` asked for the first catalogue row whose name starts "Bambu Lab" and took whatever came back. There are three of them, and there was neither a matching step nor an `ORDER BY` to choose between them: SQLite hands back insertion order in practice, which is the 216 g High Temp row, and Postgres promises nothing at all once the table has seen an update. So the same roll was recorded 34 g light on one install and correctly on another, and nothing about the spool said which had happened. The row is now matched by name, case-insensitively so a re-typed entry still counts, with the lowest id winning if a user has two rows sharing a name — without that tiebreak the read does not merely pick badly, it raises and the AMS read fails outright. A missing or renamed row falls back to the documented 250 g rather than to another catalogue row, because falling back to a row is how the arbitrary pick started; an install that has re-measured its own spools gets its own number. The path also records *which* row supplied the weight, which it never did — and that column is not the cosmetic detail it looks like. The spool form does not leave it blank: it auto-selects whenever exactly one catalogue row matches the weight, and shows the first match's name otherwise, so an arbitrary tare was displayed as a named row and written back as that row's id the next time any field was saved. A wrong number was being laundered into what reads like a deliberate choice, which is why the column being empty was the *less* damaged state. The row name and the 250 g fallback are shared with the upgrade repair below rather than written twice, so a repair can never go hunting for a row the creating path does not write. Covered by backend tests, including the duplicate-name case that would otherwise fail hard.
- **The spool tare an RFID roll was added with is corrected on upgrade (#2909, diagnosed by @ojimpo)** — The lookup that gave an auto-added spool its `core_weight` asked for the first catalogue row whose name starts "Bambu Lab" and took whatever came back. There are three, and which is first is the database's business: SQLite returns insertion order in practice, Postgres promises nothing once a table has seen an update, so the same roll was recorded with the 216 g High Temp tare on one install and correctly with the 250 g Low Temp one on another. The forward fix picks the row by name; this repairs the rows already written, which the forward fix cannot reach. The tare is not cosmetic: a spool weighed on SpoolBuddy has its remaining filament worked out as the scale reading minus the tare, so a 34 g low tare credits the roll with 34 g that is not there and writes a used weight 34 g short. That error is a constant — every later print adds to the used weight on top of it — so adding the difference back is exact however much has been printed since, and it is applied only to spools that have actually been on the scale; one that never was has a used weight derived from the AMS remaining percentage, which the tare never entered into. The rows to repair are identified by the signature of the broken lookup — added by RFID, carrying the weight of one of the *other* Bambu catalogue rows — with the weights read out of the catalogue rather than hardcoded, so an install whose rows have been re-measured is repaired to its own numbers. One case cannot be told apart and is stated rather than hidden: someone who moved an RFID roll onto a genuine High Temp spool and set 216 g by hand looks identical to a row the lookup got wrong and is normalised with them. Keying on whether a catalogue row had been recorded would not have rescued them either — the weight picker auto-selects the only row matching the weight and writes its id on the next save, so that column says only whether the form was ever opened. Runs exactly once, so a tare set afterwards is kept.
- **A wood-filled spool was named as plain PLA on the slot it was assigned to** — A spool's subtype is half of what it is called: "PLA" and "PLA Wood" are different filaments, and the AMS slot's hover card built the assigned-spool line out of brand, material and colour name with the subtype left out. A roll of Bambu PLA Wood Classic Birch in an H2C's A4 was therefore announced as "Bambu Lab PLA - Classic Birch". Everything else named it correctly at the same moment — the RFID read, the inventory row, the slot's own profile line, which is built from the spool's slicer preset rather than reassembled, and Bambu Studio — so the one wrong line read like a bad tag read rather than a display fault. It was not only the render: the card's `assignedSpool` prop had no subtype field at all, and the six places the printer card fills it in (regular AMS, AMS-HT and external spool, each in both Spoolman and internal-inventory mode) never passed one, so the value could not reach the component. The field is required now rather than optional, which is what stops the next call site from quietly omitting it — that omission is the whole of this bug. Three more surfaces were rebuilding the name the same way and are fixed with it: the SpoolBuddy AMS slot panel in both inventory modes, and the write-tag confirmation. Every other place a spool is named — the assign dialogs, the inventory cards, the forecast rows, the label picker — already included the subtype, so these four were the outliers. This is the display-side half of #2902, which stopped the backend reducing a filled or foamed filament onto its base material; the card was doing the same thing to the same spools, one layer further out.
- **The bundled chamber-preheat table was unreadable to the code that reads it** — every lookup of the per-filament chamber map happens after the keys are upper-cased, but an install that had never opened the setting got the bundled table back exactly as declared, with its lowercase `default` row. The scheduler then looked for `DEFAULT`, found nothing, and used a hardcoded 0 for any filament without a row of its own. It reported the right number only because that bundled default is 0 — raising it would have silently changed nothing for everyone who had not customised the map. Both paths out of the parser now honour the one contract it documents.
- **The archives API never reported which plate was printed (#2796, contributed by @sgiffhorn)** — `archive_to_response()` builds the archives response field by field and had no line for `plate_id`, so `GET /archives/`, the detail endpoint, search, PATCH and the project archive list all answered `plate_id: null` — for archives whose column was populated as well. `ArchiveResponse.plate_id` defaults to `None`, so Pydantic filled the null in without complaint and nothing ever raised. The column has been written since #2603 and is backfilled from the queue on startup, so the plate was recorded all along and simply could not be read back out; on the reporting instance 181 of 257 rows carry one. Archive cards now name the plate again — but only when it is not the first one. The queue records a plate for single-plate files too, because the print dialog auto-selects the only plate there is, so labelling every archive that has a `plate_id` would have put "Plate 1" on most cards in the grid and taken room from the truncated print name. A multi-plate archive printed from its first plate still identifies itself through the plate carousel, which has always gated on whether the source 3MF holds more than one plate.
- **The first AMS sync after enabling Spoolman from Settings failed on every slot (#2903, diagnosed by @ojimpo)** — Spoolman rejects a spool whose `extra` dict carries a key it has not been told about, answering HTTP 400 `Unknown extra field tag.`. Bambuddy stores the tray UUID in `extra.tag`, so that key has to be registered before the first spool is created — and registration only ever ran from three hand-maintained lists that fire when the integration is *set up*: the Connect button, application startup, and two inline blocks in the inventory routes. Enabling Spoolman from the Settings page reaches none of them, so "Sync AMS Data" reported `Synced 0 spools with 3 errors` with vendor and filament creation succeeding and only spool creation rejected. Restarting Bambuddy cleared it, which made the failure look like a connectivity problem. The Connect button would also have fixed it, but it is not on screen by then: saving the settings initialises the Spoolman client as a side effect of syncing locations, the status endpoint reads any live client as "connected", and the UI shows the Connect button only while disconnected — so the one registration path reachable from the interface hides itself exactly when it is needed. Registration now travels with the write instead of the feature: every spool write that carries an `extra` dict registers the keys it is about to send, once per client, before it sends them. That covers all five places Bambuddy writes a tag — AMS sync, linking and unlinking a tag from a spool, and both inventory edit paths — and it closes the class rather than the instance, since a write that carries a key is now a write that registers it. `bambu_color_name` is the cautionary case: it never made it into the Connect or startup lists at all, and worked only because two call sites remembered to register it by hand. Registration stays best-effort — if it fails, the write is still attempted and reports exactly what it reported before, and the failure is not cached, so a Spoolman that was merely restarting is retried on the next write.
- **The Spoolman connection status described Bambuddy's memory rather than Spoolman (#2903)** — "Connected" meant "some earlier request in this process left a client object behind", and around twenty code paths build one lazily, so the answer turned on which page had been opened rather than on anything about Spoolman. A switched-off integration could still report Connected from a leftover client; changing the URL kept reporting on the previous host; and saving the Settings page built a client as a side effect of syncing locations, which is how enabling Spoolman came to report Connected before anything had been set up. The status now asks the Spoolman that is configured right now, so the answer is the same whatever you opened first. The Disconnect button is gone with it: Spoolman is a stateless HTTP API with no session to close, so the button only dropped the client object that the next request rebuilt moments later, after which the status flipped back on its own — it looked like it had worked, then quietly undid itself. Turning the integration off is the enable toggle's job, and Connect remains as what it actually is, a way to re-check a Spoolman that is not answering.
- **An AMS slot assigned a PLA+ spool became unusable for PLA (#2902, reported by @doncaruana)** — Assigning a spool wrote its material straight into the slot's `tray_type`, and a slot that says "PLA+" satisfies nothing that asks for PLA: not OrcaSlicer, not Bambu Studio, and not Bambuddy's own dispatch matcher, which compares the printer's reported type to the one the 3MF declares. The same string then missed the filament-id lookup, so the slot went out with no `tray_info_idx` at all — the half-configured state a printer reverts from — and took the generic 200/240°C nozzle range instead of PLA's. PLA+ is not a special case: Bambuddy's own colour catalogue supplies the material dropdown, and about forty of its values are vendor product lines rather than filament types — HTPLA, PolyTerra PLA, PLA Matte, ASA Extrafill, Flexfill TPU 98A. All four routes that configure a slot now reduce the material to a type the printer knows before sending it, and the product name moves to `tray_sub_brands`, which is where Bambu Lab itself puts it — their catalogue has a preset named "eSUN PLA+" whose type is PLA. A material that cannot be placed is sent exactly as before rather than guessed at, so this can only repair a slot, never break a working one; and a material that already had a preset of its own keeps it, so "PETG HF" is not quietly downgraded to plain PETG. One thing that starts working as a result: a slot holding a calibrated preset is now reused when a same-material spool is assigned to it, which for these spools could never happen before. A filled or foamed variant is a type in its own right and is left alone: PLA-AERO, PLA-GF, ASA-GF and PPS-GF were being reduced onto their base material, so a plain PLA plate could have been dispatched onto foaming filament — every type the Profiles editor offers now reaches the slot intact, whether it is written "PLA-AERO" or "PLA Aero". And when a spool points at a slicer preset, the slot takes that preset's own filament type rather than one read out of the material column, since a preset is chosen from a list the slicer defines; the material is still what a spool without a preset is read from. Two lookups keyed by material had to learn the same distinction: a variant with no nozzle range of its own now takes its base material's rather than the 200/240 catch-all, so an ASA-GF spool is no longer sent out at ASA's minimum minus thirty degrees, and the preheat chamber target does the same — ASA-CF and ABS-GF reach a warm chamber for the first time, while PETG-CF and PA-CF keep the hotter rows they are listed with.
- **A failed upload told you to check the SD card, whatever had actually gone wrong (#2899, reported by @grolmus)** — Every dispatch upload that failed carried the same sentence: "Failed to upload file to printer. Check if SD card is inserted and properly formatted (FAT32/exFAT)." The reporter got it after a TLS handshake failure and restarted the printer on the strength of it. That could not have helped — the handshake never reached the printer's filesystem, and the cool-off that made the next dispatch fail identically lives in Bambuddy's own memory, where power-cycling a printer does not reach. #2780 had already taken operator advice out of this failure's log line, for exactly the reason that the advice was known not to work; it survived in the string people actually read. The information to say something true was never missing. The FTP client separates five connect failures and three upload reply codes, each with its own log line — 553 even gets a spelled-out list of storage causes — and then handed the caller a bare true-or-false, so the dispatch had nothing to go on and guessed storage for all of them. The reason now travels with the result, and the message is chosen from it: a 553 or 552 keeps the card advice, which is the case it was written for, and quotes the printer's reply code so a queue entry and a support bundle can be lined up. A handshake failure says the file service answered without TLS and that the card is not involved. A refused connection points at the access code, a timeout at the network, and anything the client could not classify says so and points at the log rather than picking a plausible cause — a wrong instruction costs more than a vague one, because it sends someone to work on hardware that is fine. No message prescribes a power cycle, which is the restraint #2780 settled on. The failure notification carries the same sentence the queue shows, rather than its own fixed "Failed to upload file to printer", so a push and the screen can no longer disagree.
- **One handshake failure took out three queued jobs and every retry they had (#2898, reported by @grolmus)** — A print dispatch that met a TLS handshake failure spent its whole retry budget without opening a single socket. The cool-off that a failed handshake arms (#2780) lives inside `connect()`, so it applied to everything — including the dispatch, whose four attempts two seconds apart were all answered from the gate rather than the network. The reporter's farm logs the shape exactly: the delete that clears the way for the upload took the SSL error at 11:10:04.956, the upload's first attempt started 8ms later, and attempts two through four took one to two milliseconds each. Because the cool-off runs for five minutes, the next two jobs queued for that printer failed the same way inside the same window, and on that farm the failure is transient — a manual connect a second later completes cleanly — so the retry the gate suppressed is the one that would have worked. The gate was serving two callers that want opposite things from it. The background sweeps that fetch a 3MF, a cover or a timelapse after a print walk about a hundred and ten candidate paths against one wedged printer with nobody waiting, and backing off for minutes is right for them; they keep today's behaviour untouched. A dispatch is one delete plus at most four upload attempts with someone watching a progress bar, so it now ignores the cool-off, as does a firmware upload, for the same reason. Callers that do respect the cool-off no longer sleep out a retry loop against it either: the loop stops at the attempt that armed the gate and says so, instead of spending three more attempts and six seconds on connections that cannot happen. What made this a log dive rather than a glance is fixed with it: the cool-off skip was the one connect failure that reported without naming its cause, and did so at debug level, so four identical reason-free warnings were all the operator saw. It now says at warning level that nothing was sent and how long the printer has left — once per cool-off rather than once per attempt, so that raising it does not recreate the log flood #2780 set out to stop.
- **Archived projects crowded out the live ones in every project picker (#2888, reported by @e77)** — The reporter files each job under its own project and archives it when the job is done, so five active projects sat behind thirty-odd finished ones in the Project dropdown of the Edit Archive dialog — an unscrolled list of everything ever created, with no way to tell which entries were still live. That dropdown, the one on the pending-uploads panel, the bulk "Add to Project" dialog and the File Manager's folder link now leave archived projects out. Completed projects stay: a project marked completed says the work is done, not that it should be hidden, and filing a reprint under one is ordinary. The Archives right-click submenu had gone the other way and offered active projects only, so a completed project was reachable from the Edit dialog and not from the menu beside it; all five surfaces now apply the same rule. Whatever an archive is already filed under stays on its own list whatever its status — a `<select>` holding a value none of its options match is reset by the browser to the first one, which here reads "No project", so an archive in an archived project would have stated that it was filed nowhere. The one picker deliberately left alone is the parent-project picker, where a finished or archived project is still a legal parent. Fixed alongside it: the status tabs on the Projects page counted only the projects the selected filter had already let through, so every tab but the current one counted zero and lost its badge entirely — the reporter's own screenshot shows "Active 5" beside a bare Completed and a bare Archived, with thirty projects behind them. They are counted from the whole fleet now. Covered by frontend tests.
- **The full-page G-code preview grew without limit and never drew anything (#2887, reported by @ojimpo)** — Opening a 3D Preview from Archives left an empty white pane with the legend and layer slider floating over it, while the page's scrollbar shrank for as long as it stayed open — about 190px of page height per second, without stopping. Two faults compounded. The viewer appends its canvas into the very element it measures and watches for resizes, and three.js writes each new size onto the canvas as inline style, leaving it `display: inline` so the line box adds descender space on top; on a page where that element takes its height from its contents, the canvas was sizing the box that sizes the canvas, gaining a fixed 33px every round. And the page never gave it a height to take instead: the viewer pane is `flex-1 min-h-0`, which divides nothing unless the column above it is a definite height, and `h-full` is a percentage that resolves against a main area whose own height comes from a `min-height` — a floor, not a size — so it fell through to the content. Nothing was ever drawn because each observer callback reallocated and cleared the frame buffer before an antialiased render of what had grown to roughly 18 megapixels could finish. The canvas is now positioned out of flow, so it cannot contribute to the height of the element that measures it on any page, present or future, and that element takes a definite height from the pane around it rather than a percentage; the page itself is sized from the viewport the same way the File Manager page already was. The same viewer inside the File Manager dialog was never affected — a dialog gives it a fixed height, so neither fault could arise there. Nothing was wrong with the data path at any point: the legend and the layer slider were built from the parsed toolpath throughout, so the fetch, the parse and the layer split had all succeeded.
- **A print could not start on the nozzle sitting in the H2C's rack (#2885, reported by @apizz)** — A job sliced for a 0.2mm nozzle failed in the queue with "install the matching nozzle before printing", even though a 0.2mm nozzle was in the tool-changer rack and the printer would have fetched it. Only picking the nozzle up by hand on the printer's own screen first let the print run, and because the item failed rather than waited, the rest of the queue went with it. The reporter noticed the giveaway: going *to* 0.4mm always worked, going *to* 0.2mm never did. The nozzle-diameter guard that catches a genuinely wrong slice before upload was measuring the wrong thing — it compared the sliced diameter against the two mounted hotends only, so on a machine whose hotends both read 0.4mm nothing but 0.4mm could ever pass, and the rack picker that would have fetched the right one runs further down the same dispatch and never got the chance. The rack now counts as reachable: a diameter parked in any dock satisfies the guard the same way a mounted one does. This was never only about 0.2mm — a 0.6mm slice was blocked identically. A diameter that is in neither a hotend nor a dock still stops the print before it uploads, and the message now lists both sets so it is clear what the machine actually has. Also fixed alongside it: an empty carriage keeps reporting the diameter of the nozzle it last held, so a hotend that had parked its nozzle back in the rack was counted as a mounted 0.4mm that was not there — presence is now read from the nozzle's own temperature rating and serial number, and a hotend is only discarded when both agree it is empty. Printers that report no rack at all are unaffected.
- **An AMS slot could name the wrong white** — A hex is not one colour in Bambu's range: `#FFFFFF` is Jade White in PLA Basic, Ivory White in PLA Matte and plain White in six other materials, and `#000000` is Charcoal in PLA Matte where it is Black everywhere else. The slot popover looked the colour up by hex alone, and the lookup table can only keep one name per hex — so an ivory Matte spool was titled "Jade White" even while the profile line beside it correctly read Matte Ivory. The colour map now also carries the names that collapsing loses, keyed by material, and every slot resolves its colour with the material the printer reports for it (`tray_sub_brands`). Slots with a spool assigned from Inventory are titled with that spool's own colour name, which is the roll the user actually put in. Only a name the same brand's own range lost is carried — one manufacturer's name must not displace another's — so the added map is 11 entries against the 608 in the shipped catalog.
- **A queued job switched on printers that could never have printed it** — When no printer of the target model was available, the queue powered one on via its smart plug, but chose it on model alone: it walked the farm in printer-ID order, woke the first machine with an Auto On plug, and only then discovered the loaded filament was the wrong colour. A job for a colour loaded at the far end of the farm therefore woke every earlier printer in turn and left each one running until its own auto-power-off timer expired. The colours were known the whole time — a printer keeps its last reported AMS and external-spool trays after the power goes — so the wake step now asks the same three questions the matcher asks a live printer (required types, forced colours, preferred colours) and passes over a printer whose last known filament cannot satisfy the job. A printer Bambuddy has never heard from is still woken: no reading is not the same as no filament. Reconnecting a printer also no longer discards that reading, so a power-on attempt that times out stops erasing what the next attempt needs.
- **Archive metadata could describe a plate that was never printed** — The layer height on the archive card and in the library's file details came only from the 3MF's `project_settings.config`, and the plate G-code beside it was read for the layer count alone — the first `.gcode` entry in the zip, whatever plate the archive was actually for. A multi-plate export therefore reported plate 1's layer count even when plate 3 ran, and nothing ever cross-checked the layer height against the plate that produced the print. Both now come from the printed plate: its G-code is read (64 KB, enough to reach the config block that carries `layer_height` 14–25 KB in, where 4 KB only ever reached the header), and its value wins over the project's where the two disagree. Source 3MFs, which carry no G-code, keep the project value exactly as before.
- **Slicing a file could ignore the process preset you picked** — Bambuddy carries a designer's own process deviations across a re-slice (#2622) and pre-ticked all of them except the machine-coupled ones. `layer_height` is one that MakerWorld projects routinely carry, so picking "0.08mm High Quality" for a file whose designer had moved layer height to 0.2 sliced at 0.2 while the dropdown still read 0.08 — the same 0.2 the settings panel showed, tagged "from file". Layer height and first layer height are now treated like the machine-coupled keys: still offered, never pre-selected, and their badge in the settings panel names the conflict and shows the preset's own value beside the file's, so ticking one is a deliberate choice.
- **Statistics forgot the name of a printer that was deleted with its history kept (#2873, reported by @rembomy)** — Prints by Printer, the per-printer success breakdown, the time-accuracy list and Failures by Printer all resolved the name against the printers that exist right now, so deleting a printer and choosing to keep its prints turned "Ultron" into "Printer 1" everywhere. The runs themselves already recorded the name they printed on, and that is what those breakdowns fall back to now: the last name the id was known by, for as long as its prints are kept. A printer that still exists is named from its own record as before, so a rename shows up immediately rather than after the next print. Covered by backend and frontend regression tests.
- **Skip Objects went dead for the rest of a print if Bambuddy restarted while it was running** — The object list lives in memory and is filled by the print-start path, which is deliberately suppressed on the first status push after a restart so the print is not archived twice. Everything else that moment restores — the archive, filament attribution, the timelapse baseline — came back; the object list did not, so the printer card saw zero objects and greyed out its Skip button. Measured on the maintainer's H2C: 8 objects loaded at 09:02, a restart at 09:17, and no way to skip anything for the remaining hour of the print. Nothing could recover it either, because the one endpoint that can rebuild the list is only reachable from the modal that the greyed-out button opens. The list is now restored on the way back up, from the archive of the print that is still running and matched on the job id the printer mints per print, so a stale archive cannot lend its objects to someone else's job. Two things behind it changed as well: rebuilding now reads the archived 3MF on disk before asking the printer for a file Bambuddy already has — that request was a full transfer off a machine mid-print, 15 MB in this case, and it cannot succeed at all on a printer that kept the file on internal storage — and the card now treats zero objects as "not loaded yet" rather than "nothing to skip", since a running print always has at least one. A single-object print still greys the button out, which is the case that rule was written for. The plate image in the modal came from the same place and had the same problem: the cover, the top view and the object-ID mask all re-fetched the 3MF from the printer after a restart, three fan-outs at once for one modal, so the picture arrived seconds after the list. They now read the running print's archived file too. Wiki updated. Covered by backend and frontend tests.
- **A print archived without its 3MF can be given its filament weight by hand (#1820, reported by @ojimpo)** — When the sliced file stays somewhere Bambuddy cannot read, the archive is created from the printer's report alone and carries no weight, so the print is missing from every filament total and there was no way to put it right afterwards: Rescan reads the figure out of the 3MF, and that archive has no file to read. The reporter's H2S print left 46 g of PLA on the spool with nothing recording it, and he corrected Spoolman by hand. **Edit Archive** now has a **Filament used (g)** field. It is written to the print's most recent run as well as to the archive, because the Projects roll-up and the Prometheus counter sum the runs rather than the cards — correcting only the card would have fixed the display and left every aggregate reading the old figure. The value is bounded at 0 to 100 kg, it is sent only when you actually change it, so an ordinary save cannot round off a sliced figure, and emptying the field clears it. A run that measured its own weight through spool tracking keeps that measurement — the correction fills in a run that has none, or one that only ever inherited the archive's estimate, and never overwrites a real measurement with a typed one. Nothing is deducted from Spoolman or internal inventory either: those are charged from what was tracked at the time, and a print that recorded nothing has nothing to reverse. On an archive that does have its 3MF, Rescan still overwrites what you typed — there the file is the authority. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **The internal-storage probe now logs which directory served the file (#1820)** — When a printer says a print went to internal storage and Bambuddy finds it over FTPS anyway (#2856), the log said which file but not where it came from. On a printer that keeps uploads for weeks — the reporter's H2S has months of them in `/cache` — a reprint of a name that was re-sliced but never re-sent can match an older copy, and without the directory in the log that mismatch was invisible rather than merely rare. The download helper now reports the path that served the file instead of a bare success flag, and the hit line names it. Covered by backend tests.
- **Card and row actions were unreachable on phones and tablets (#2865, reported by @aishlai)** — The three-dot menu on a project card carries Edit and Delete and appeared only on hover, so on a phone there was no way to rename or delete a project at all; the File Manager's folder actions went the same way, as did duplicating a preset, renaming or deleting a tag, removing a print photo and deleting a plate-reference image. This is worse than a missing hover event: Tailwind v4 compiles `hover:` and `group-hover:` inside `@media (hover: hover)`, so on a touch-only device the rule that reveals the control is not merely never triggered, it is never applied — the element stays invisible for good. The hiding half is now what depends on a hover-capable pointer, so a device that cannot hover simply shows the control, and a mouse behaves exactly as before. Four spots on the Archives cards and two on the File Manager's file cards already tried to handle this by viewport width, under 768 pixels, which meant a phone was fine and a tablet in landscape was not; they now use the same capability check and the width guess is gone. Keyboard users were affected too, in the other direction — the buttons were invisible but still focusable, so tabbing through a card stopped on something nobody could see; focus now reveals them. Wiki updated. Covered by frontend tests.
- **The File Manager's card menu no longer loses its top entry (#2846)** — In grid view a file card's action menu was drawn inside the card, and the card clipped anything its children painted outside it. A card is as tall as its square thumbnail plus whatever metadata the file has, so an STL — which has none beyond a name and a size — produced the shortest card in the library, about 270px against a seven-entry menu that needs closer to 310px. The difference was one row, and the row it took was the top one: **Slice**, since **Print** is only offered for a file that is already sliced. A 3MF carries a target model and a print count, two more rows, and its card was tall enough, which is why the button appeared there and looked like a file-type rule rather than a layout accident. Nothing about STL was special; the shortest card simply lost the first item, whichever it happened to be. The menu now opens against the viewport, the way the archive card's menu already did, so no card can crop it, and the card no longer clips its own children. List view was never affected — it has no menu, only inline buttons. Covered by a frontend test.
- **Closing the bug-report panel no longer throws the capture away and leaves the logs running (#2847)** — Step 2 of the report flow asks you to reproduce the problem, and the panel sits over the part of the app you have to reach to do it. Closing it was the obvious move and it was the wrong one twice over. Reopening put you back on an empty step 1 — while the server was still logging at DEBUG, with nothing left in the flow that could stop it, because only **Stop & Submit** ever did. Leave it closed instead and the five-minute cap eventually fired behind your back: logging stopped and the report was filed with no window open and no confirmation that it had happened. Which of the two you got depended only on whether you reopened the panel inside five minutes. A capture is now a thing that outlives the panel. Closing keeps it running and says so — the bug button turns amber for as long as a capture is going, and clicking it returns you to step 2 with your description, your screenshot and the elapsed timer where you left them. If the cap does fire while the panel is closed, the panel reopens so the submission happens in front of you rather than behind you. The timer is measured against the capture's start time rather than counted in ticks, so a background tab, where browsers throttle timers hard, no longer stretches five minutes into something else. A capture also survives a page reload, which matters because reloading is a perfectly ordinary step in reproducing a bug: the report picks it back up where it was. One that outlived the cap while nobody was watching is not resumed and not filed — a description written an hour ago is not a report you are still expecting — but the log level is put back, which is the part that previously stayed wrong indefinitely. Translated in all locales; wiki updated. Covered by frontend tests.
- **The build plate of a powered-down printer can be cleared again (#2864, reported by @bryanmahin)** — With Auto Power Off enabled this is the ordinary end of every print: the job finishes, Bambuddy switches the printer off at the plug, and the plate is left flagged dirty on a machine that is no longer reachable. The operator then walks over, clears the plate, and had no way to say so — `POST /printers/{id}/clear-plate` answered 400 "Printer not connected", and the button was hidden on the printer card, so the physical clear-plate buttons some farms drive over the API went dead too. Everything gated on the flag stayed stuck until each printer was powered back on by hand, cleared, and switched off again, which is the opposite of what Auto Power Off is for. Nothing in clearing a plate talks to the printer: the flag is Bambuddy's own state, persisted in its database precisely so it survives the power cycle, and the check that refused was inherited from the stop, pause and resume handlers next to it, where reaching the printer genuinely is required. It is gone, and the card offers the control whether the printer is online or not — in both card sizes, and for bulk selections, where powered-down printers were being filtered out of a Clear All. This does not dispatch work to an unreachable machine: the queue still requires a live connection before it sends anything, and releasing the gate is what lets it power the printer back on for the next job instead of skipping it. One related gap went with it — a printer with no live connection at all, disconnected by hand or not yet reconnected after a restart, reported its plate as clean over the API regardless of what the database said, which hid the control on exactly the printers that needed it. Wiki updated. Covered by backend and frontend tests.
- **Timestamps hours ahead of themselves on PostgreSQL in a non-UTC zone (#2855, reporter @Tolga-Unal)** — On a UTC+3 install every AMS humidity reading and every archive was stamped three hours ahead of when it happened. Bambuddy stores naive timestamps holding UTC and the frontend reads an offsetless timestamp as UTC, so the display added the offset to a value that was already local. The Python side has honoured that contract since #504 — but the reporter's timestamps were not written by Python. Around ninety-six columns take their value from `server_default=func.now()` and the migration DDL carries another forty-nine on `DEFAULT CURRENT_TIMESTAMP`; the database fills those, and on PostgreSQL `now()` is a `timestamptz`, so storing it into a `timestamp without time zone` casts it through the session TimeZone. A Postgres container started with `TZ=Europe/Istanbul` bakes that zone in at initdb, and every defaulted column then receives local wall-clock. Connections now carry `timezone=UTC`, which makes the cast a no-op whatever the server is set to — measured through the real engine factory against a live PostgreSQL, a session on the reporter's configuration stored +10800s and the fixed one +0s. Pinning the session was preferred over a hundred and forty-five individual edits partly for its size but mostly because half of those sites are raw DDL no model-level change can reach. SQLite needed nothing: its `CURRENT_TIMESTAMP` is UTC by definition and it has no session timezone to get wrong, which is why this survived two years of timezone fixes without showing itself, and its behaviour is now pinned by a test rather than assumed. Rows already written are deliberately left alone — the inverse cast is computable, but `created_at` is assigned explicitly on some paths and defaulted on others, and an install that began on SQLite holds correct and shifted rows side by side with nothing to tell them apart. The support package's oldest-pending-job age went with it: it subtracted a naive local clock from a naive UTC column, reporting a job queued five minutes ago as three hours old east of Greenwich and a negative age west of it.
- **A print with no 3MF borrowed another model's filament and cost (#2843, reporter @gyrene2083)** — An archive with no 3MF keeps the path the printer is executing as its filename, and on a sliced job that is always `Metadata/plate_1.gcode`. The fallback that looks for the same model in the Library or among earlier prints took its search term from there, so it searched for `plate_1` — a name every Bambu print in existence has — and matched on a substring, so it also matched any name merely ending that way. On an H2D a 1.6 g cube resolved to `lid_plate_1.gcode.3mf` and was costed at 207 g across three real spools; in the same database `Bank.3mf` matched "Piggo the piggy bank". The matcher now takes the model name the printer reports when the filename is only a plate path, refuses a bare plate stem rather than searching for it, and anchors to a whole filename with LIKE metacharacters escaped, because `_` is a wildcard and model names are full of them. A print that cannot be identified is left untracked, which is the honest answer; checked against every row on a real install, 233 archives still match their own filename and the fourteen results that changed are all false positives that went away. Two further faults went with it. Those archives could not receive a timelapse at all: the destination was derived from the missing file's path and landed one level outside the data directory, which in Docker meant every attempt failed EACCES and the scan re-downloaded and discarded the video twenty-five times over twelve minutes; it now uses the shared helper #1820 introduced for exactly this. And a slot whose spool has no RFID and no hand-set remaining amount was skipped silently when filament was charged by percentage delta, which is indistinguishable from having nothing to charge — it now says so in the log.
- **A slot that could not be charged now says so (#2843)** — When a print's filament cannot be read from a 3MF, Bambuddy falls back to the drop in the AMS's own remaining-filament percentage. That needs a reading when the print starts, and a spool without RFID has none until you set a remaining amount by hand — so those slots were skipped in silence. Nothing was deducted and nothing said why, which is indistinguishable from having nothing to deduct. Every other reason for skipping a slot was already logged; this one now is too.
- **Timelapses were lost, and written outside the data directory, for any print archived without a 3MF (#2843)** — Every H2-series and P2S print sent from Bambu Studio, so not a rare case. The video downloaded from the printer correctly and was then written next to the data directory rather than inside it, because an archive with no 3MF has no directory of its own and the destination was derived from the missing file's path. In Docker that meant a permission error, retried and discarded twenty-five times over twelve minutes, roughly a hundred connections to the printer for a video that was thrown away each round. Where that location happened to be writable it was worse: the file landed beside the installation, the attach failed anyway, and the stray video stayed there. Bambuddy has had a shared helper for exactly this since #1820 and this was the one place still deriving the path by hand. Timelapses now land in the archive's own folder and attach normally. Covered by backend tests.
- **The connection diagnostic mistook a slicer's print for one of Bambuddy's own (#2843 follow-up)** — Bambuddy records the `project_file` command behind every print, because it names where the sliced file was put and so decides whether the archive can have a thumbnail and slicer metadata at all. Its own dispatches were told apart from a slicer's by testing the sequence id against 20000, on the belief that 20000 was Bambuddy's alone. It never was: 20000 is the slicer convention Bambuddy copied, and both slicers count up from it — measured on the wire, OrcaSlicer dispatched 20000 and then 20001, Bambu Studio 20009 and 20010. So whichever dispatch happened to land on the shared value was filed as ours and never recorded, and after a slicer restart that is the first print you send; the test was wrong in the other direction too, calling every higher value external including ones we had sent ourselves. Ownership is now established by remembering the job actually dispatched — sequence id, file, url and subtask name — and consuming that marker on the echo, one-shot, so a slicer reprint of the same file a moment later cannot hide behind our last one. Nothing about printing or archiving changes, and two tests pin that the storage verdict gating the FTPS sweep is untouched; what changes is that the diagnostic entry telling an operator whether their printer stores files where Bambuddy can read them stops undercounting, silently.
- **A reprint of a file already on the printer lost its thumbnail (#2780 regression)** — A print of a file the printer already holds — a reprint from the touchscreen, from Handy, or a slicer send-to-storage followed by a print — reports its location as a path rather than as a fresh upload, `file:///media/usb0/<name>`. Since #2780 landed Bambuddy read anything that was not `ftp://` as "the printer kept this internally", skipped the FTPS sweep, and archived the print with a name and timing only. Measured on an H2D: the file was listable and downloadable over FTPS at the moment Bambuddy declared it unreachable, and it was not confined to the H2 series the change was about — an X1C reprint from its own screen lost its thumbnail exactly the same way. That module's own rule is to skip only on positive evidence, and a `file://` path is not evidence of internal storage. It now reads the path: the printer's model cache under `/userdata` is a genuine skip, anything else is unknown and sweeps, which is what it did before. Unknown rather than external on purpose — the empty-slot check still runs ahead of it, so a `file://` print on a printer with nothing in the slot reports the missing card instead of sweeping for something that cannot be there.
- **A printer that keeps its files on the card was written off as internal-storage-only (#2856, reporter @aishlai)** — A print's dispatch says where the printer put the sliced file: `ftp://<name>` for external storage, `brtc://emmc/<name>` for internal. Reading the second as "no file to fetch" is where the printer chose to put it, which is not the same as where port 990 can read it. The reporter's H2D — firmware 01.03.00.00, card in the slot — reports `brtc://emmc` and keeps the same file under `/cache`: their log has every print downloading from there, a 19 MB one included, until the skip landed and two days of archives came out as a name and nothing else. #2780's P2S and H2C really did fail on every path, so both are true and the URL alone cannot tell them apart. So Bambuddy now asks the printer rather than the model. The dispatch names the exact file, which turns the question into one connection walking five directories, against the sweep's ~110 that made skipping worth doing in the first place. A hit archives normally and is shared with the cover endpoint; a miss keeps #2780's fallback archive and its stated reason, so the banner still explains itself. It is not probed when the printer reports an empty slot, or while its file service is in TLS cool-off, because both have already answered the question. The connection diagnostic asked the same question off the URL and warned that the last print was out of reach — on this reporter's printer that warning pointed at a setting that was already right, so it now probes too, by directory listing rather than download, capped at six seconds to stay inside the support bundle's per-printer budget, with "could not check" leaving the warning standing. The probe filename arrives over MQTT and becomes both a remote path and a local temp filename, so names carrying separators, traversal or control characters are declined rather than cleaned.
- **Energy tracking stopped as soon as a second plug was linked to a printer (#2859)** — Per-print energy is one plug's meter read at the start of a print and again at the end. Both readings asked for "the plug on this printer" in a way that raises when there are two rows, so linking a dry box, a filter fan or a lights script to a printer stopped energy tracking on that printer outright — and did it silently: the start handler logged the exception as an ordinary failure and the end handler then reported "no start kWh recorded", which is also what it says for a printer with no plug at all. The assumption was never enforced anywhere else; the plug API deliberately allows any number of Home Assistant entities, the unique constraint on the printer column was dropped on purpose, and every other consumer reads a list. Energy now ranks a printer's plugs — the one that powers it first, then by id so the start and end readings agree — and takes the first that actually reports a counter, so accessories drop out with nothing to configure. Ranking rather than filtering, because a printer whose only linked row is disabled or is a script used it before and still does; and when none of them measures anything, the log names the ones it tried instead of reading like "no plug configured". Existing archives cannot be backfilled, since the starting reading was never taken. Separately, the plug page counted an online plug as offline unless it reported energy, so a switch with no power sensor showed as offline for as long as it stayed linked.
- **The smart plug page counted an online plug as offline unless it reported energy (#2859)** — A plug with no power sensor is still online, but "N/M plugs online" only counted the ones sending energy figures, so a working switch showed as offline for as long as it stayed linked. The count now reflects whether the plug answers.
- **The AMS temperature alert fired for the whole of a drying cycle (#1802, reporter @apizz)** — The alert compares against the same threshold that colours the printer card, which defaults to 35 °C. Drying deliberately runs at 45 °C for PLA, 65 °C for PETG and up to 85 °C on an AMS-HT, and the alert repeats once an hour for as long as the condition holds, so a twelve-hour dry sent twelve notifications about a temperature the user chose — and then kept sending them while the unit cooled back down, which is the half the reporter confirmed on an AMS 2 Pro and an H2C. Dispatch now consults the drying state the firmware already reports. Dry time alone is not enough, since it reads zero through the cooling phase that closes a cycle, so the dry-status bits already parsed for the drying-complete edge carry the rest. The cool-down afterwards is held by a latch released as soon as the unit reads back at or below the threshold rather than after a fixed delay, so a 65 °C cycle in a cold basement and a 45 °C one in a warm room each get the time they actually need, with a two-hour cap bounding the one case the latch cannot resolve on its own. Two exclusions are deliberate: humidity is untouched, because during drying that reading falling is the whole point, and HeatOutOfControl is kept out of the active set, since an AMS that has lost thermal control is exactly when the alert should still arrive. A cycle plus its cool-down outlasts a restart, so the latch is stored rather than held in memory, with clocks that jump backwards clamped on read. No new setting: the reporter was offered the opt-out checkbox they asked for and said they would not want it if the alert simply never fired during drying.
- **Automatic flow-dynamics calibration left an archive and two notifications behind** — With flow dynamics calibration on, the printer lays down a pressure-advance line before the print itself and announces it over MQTT through the same print-start event a real print uses. Bambuddy archived it: a row named `auto_pa_line_calib_mode` marked as having no 3MF, sitting in among the user's actual prints, with a Print Started and a Print Completed notification for each one. The printer's other internal jobs were already skipped, but only by the `/usr/` path they carry, and the pressure-advance line carries no path at all — it arrives as a bare subtask name, so a rule that only ever looked at the filename could not see it. Internal jobs are now recognised by name as well as by path, from either field, in one place both callbacks share, matching exactly after normalising away the directory, one print-file suffix and case: "auto" and "calib" are ordinary words in a user's own filenames, and a looser rule would quietly swallow somebody's print. Suppressing the completion matters more than the noise it removes — with no archive to close, an unmatched completion is attributed to any queue item the printer finished in the last five minutes and emails its owner, so silencing only the start would have told the owner of the real print running alongside it that their job was done, early, and again for real later. The guard sits inside that branch only, so the plate-clear gate, the queue reconciliation and the SD-card cleanup all still run. Skipping the run early also drops the FTP sweep that preceded the fallback: around a hundred connections looking for a file that cannot exist, aimed at a printer in the middle of calibrating. Bed levelling no longer sends a Print Started notification either.

### Security



## [1.2.5.3] - 2026-08-15

### Added
- **Billing and cost centres, with per-print charging and budgets (#1448, contributor @behrinml)** — Bambuddy could tell you what a print cost but could not hold anyone to it. There is now a finance layer behind the print flow: cost centres with budgets, per-user wallets, and a transaction for every print. A cost centre can be picked in the print dialog, travels with the queue item and the archive, and is reserved against before the job is dispatched rather than after it finishes, so a print that would take a budget past its limit does not start. Charges settle on real filament usage at completion, and a print that aborts part-way is charged for the part that ran instead of being written off or billed in full. Every user gets a personal cost centre and wallet on first sign-in, including the first sign-in through LDAP, so a directory-backed install does not need them created by hand. A monthly reset day and timezone decide when budgets roll over. The whole feature is behind a billing toggle and is off by default, and an optional printer kill switch stops dispatch entirely once a budget is exhausted. Cost-centre management has its own permissions rather than riding on the settings ones, so a farm can let someone spend against a budget without letting them change it. Ships with a Finance page, migrations for both SQLite and PostgreSQL, and translations in all locales.
- **One queue item, several printer models — whichever frees up first (#671, reporter @brainomite; also delivers most of #2570, reporter @NeighborGeek)** — With an H2S and an H2C, a job you don't care which machine runs still had to be queued twice: the two printers need different slices, a queue item held exactly one file, and "any H2S" and "any H2C" were separate jobs competing for the same plastic. Whichever started first, you deleted the other by hand. Select both sliced files in the File Manager and press **Print** and you now get **one** queue item carrying both — the scheduler walks them in the order you arranged and takes the first whose model has an idle printer. The many-to-many never leaves the scheduler's selection loop: the moment a candidate wins, its file, plate and nozzle mapping are folded onto the queue row, so the upload, archive creation, print history and reprint all see an ordinary single-file job and behave exactly as they always have. Order is yours to set, because "both are free right now" has to resolve the same way every time rather than following whichever match the matcher happened to see first. Candidates are otherwise tried least-attempted first, so a printer that accepts the file and never starts hands the job to the other machine on the next lap instead of spending the item's whole retry budget on the one - **Billing and cost centres, with per-print charging and budgets (#1448, contributor @behrinml)** — Bambuddy could tell you what a print cost but could not hold anyone to it. There is now a finance layer behind the print flow: cost centres with budgets, per-user wallets, and a transaction for every print. A cost centre can be picked in the print dialog, travels with the queue item and the archive, and is reserved against before the job is dispatched rather than after it finishes, so a print that would take a budget past its limit does not start. Charges settle on real filament usage at completion, and a print that aborts part-way is charged for the part that ran insteadof being written off or billed in full. Every user gets a personal cost centre and wallet on first sign-in, including the first sign-in through LDAP, so a directory-backed install does not need them created by hand. A monthly reset day and timezone decide when budgets roll over. The whole feature is behind a billing toggle and is off by default, and an optional printer kill switch stops dispatch entirely once a budget is exhausted. Cost-centre management has its own permissions rather than riding on the settings ones, so a farm can let someone spend against a budget without letting them change it. Ships with a Finance page, migrations for both SQLite and PostgreSQL, and translations in all locales.
- **One queue item, several printer models — whichever frees up first (#671, reporter @brainomite; also delivers most of #2570, reporter @NeighborGeek)** — With an H2S and an H2C, a job you don't care which machine runs still had to be queued twice: the two printers need different slices, a queue item held exactly one file, and "any H2S"and "any H2C" were separate jobs competing for the same plastic. Whichever started first, you deleted the other by hand. Select both sliced files in the File Manager andpress **Print** and you now get **one** queue item carrying both — the scheduler walks them in the order you arranged and takes the first whose model has an idle printer. The many-to-many never leaves the scheduler's selection loop: the moment a candidate wins, its file, plate and nozzle mapping are folded onto the queue row, so the upload, archive creation, print history and reprint all see an ordinary single-file job and behave exactly as they always have. Order is yours to set, because "both are free right now" has to resolve the same way every time rather than following whichever match the matcher happened to see first. Candidates are otherwise tried least-attempted first, so a printer that accepts the file and never starts hands the job to the other machine on the next lap instead of spending the item's whole retry budget on the onethat is wedged. The set is validated as a set: one file per printer model (two slices for the same machine are not alternatives, and picking between them arbitrarily would look like a bug the first time it chose your draft profile), every file gated against the model it is offered as, and at least one model that actually has a printer — grouping the H2C slice before the H2C arrives is fine, queueing a job nothing can ever run is not. A cross-model item deliberately holds no file of its own, so deleting one alternative leaves the job and its sibling intact; deleting or trashing every candidate holds it with an explanation instead of failing deep in the upload. Filament overrides offer everything loaded across **all** the candidate models rather than just the first — a spool loaded on only one of them is still a legitimate choice, it simply narrows which candidates can match — while AMS slot mapping is absent exactly as it is on an ordinary "Any [model]" job, because no printer has been picked yet and the scheduler derives the mapping against whichever one it takes. In the queue the job reads **Any H2D / X1C**, naming every model it is waiting on rather than filing itself under one it may never run on, and its waiting reason is given per model (`H2D: Busy: H2D-1; X1C: No matching material/color`), collapsing to a plain busy message — and no notification — when every model is merely printing. The alternatives are fixed once queued: the schedule, quantity and print options stay editable, but assigning a specific printer or narrowing to one model is refused by both the dialog and the API, since an item holding alternatives *and* a printer would dispatch down the fixed-printer path with no file to send. Cancel and re-queue to change the set. Files can also be grouped permanently with **Group as versions**, after which printing any one of them offers the others without re-selecting — this is the grouping and the print-time file matching asked for in #2570, minus its nested File Manager listing. An existing library arrives with its groups already built, from slice provenance Bambuddy has been recording since the Slice button shipped and had never read back. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Batch orders: a quantity per plate, and an order that knows what it still owes (#342, reporter @cimdDev)** — Printing a multi-plate file in different quantities per plate meant queueing each plate separately and tracking the counts yourself, because one shared **Quantity** field cannot say "plate 1 once, plate 2 twice, plate 3 three times". Each selected plate of a multi-plate file now carries its own quantity, and the submission becomes a **batch order** on a new **Batches** tab of the Print Queue page. What that buys is the distinction the old batch could not express: the order records how many runs of each plate were *wanted*, separately from what was queued. A run that fails, is cancelled or is skipped does not satisfy a target, so the order goes on saying it owes a print instead of quietly under-delivering — and a **Queue remaining** action re-queues exactly what is missing, for the whole order or one plate. Those new items are copied from the most recent run of that plate, so they inherit the printer or model target, AMS mapping, filament overrides and print options already chosen, and they are appended to the end of the relevant printer's queue rather than jumping ahead of work already lined up. Orders show progress against target, per-plate breakdown, and cost. Cost is measured rather than estimated: each finished run's material and energy are attributed through the queue item that produced them, so an unrelated reprint of the same file never lands in an order's total, and a multi-plate order gets each plate's own cost rather than the whole file's. Before any run has completed there is no honest figure, so cost reads as unknown instead of a fabricated `0.00`. An order becomes **completed** the moment its last run lands rather than whenever someone next opens the page, and raising a target on a finished order reopens it. Targets stay editable while the order runs, since production requirements change mid-job. The default flow is unchanged — creating an order still queues all of it immediately, and a single-plate file still has one Quantity field. Batches created before this release keep working and are labelled **Grouping only**: they only ever knew what was queued, not what was wanted, so they report progress but have nothing to dispatch. They also get closed out on the first start after upgrading — `completed` was not a reachable status before now, so every batch created since grouping shipped is still marked active however long ago its last print finished, and without that pass the new tab would open on months of accumulated history. Only batches with nothing queued or printing are touched: those whose runs all completed become completed, and groupings whose items were all cancelled become cancelled, which is what they are — calling them completed would claim output that never happened. Batches with neither queue items nor targets are no longer listed at all; those are empty shells left behind when a grouping's items were deleted with their source archive. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Nest projects under a master project and roll their figures up (#1264)** — Projects were flat. The `parent_id` column and the sub-project list already existed but nothing outside the API could set a parent, and a master project's statistics only ever covered its own prints. The project dialog now has a parent picker, and a project with sub-projects gets a second card covering the whole tree: jobs, parts, time, filament, cost, and progress against every target in the tree added together. That card is deliberately separate from the project's own stats, which keep their existing meaning — widening them would have restated the figures of anyone who had already nested projects over the API. Each listed sub-project carries its own branch's roll-up, so the rows add up to the card above them. On the Projects page a sub-project is drawn inside its parent's group rather than as another card in the grid, because two cards columns apart cannot show that they belong together whatever the caption says. Translated in all locales; wiki updated.
- **Keep the chamber warm between prints and skip a soak that is not needed (#2727, contributor @ticfinack)** — Back-to-back prints in chamber-heated materials — ASA, ABS, PA, PC — each paid a full heat soak from cold, even when the print that just finished had left the chamber at temperature. Two changes remove that cost. While a printer sits in FINISH waiting for plate-clear and the next queued item needs chamber heat, the bed is held hot so the chamber does not cool during the bed-clearing window. The bed is the chamber's heating element here rather than a print surface, so the hold runs at the new **Keep-warm bed temperature** (90 °C by default, which also satisfies the aftermarket chamber heaters that trigger off a bed threshold) and rises to the item's own bed temperature when that is higher. It is gated on the keep-warm setting, on plate-clear being required, and on the next item actually needing the heat, and it is capped by a maximum duration so a queue that stalls does not leave a bed hot indefinitely. A follow-up closed the two dispatch exits that could drop the hold without releasing it — a claim failure returns before the rollback opens, and a vanished row left the printer id unset, which the rollback guards on — either of which left a bed hot with nothing tracking it, reachable whenever a cancel or delete landed between selection and the claim.
- **Restore selected categories from a Git backup commit (#2656)** — Bambuddy has pushed backups to GitHub, GitLab, Gitea and Forgejo for a long time, and every one of those commits was a restore point that nothing could read back. Recovering from a bad settings change, a rebuilt instance or a lost database meant opening the repository by hand and copying JSON into the right places, if you knew which places those were. **Settings → Backup & Restore → Restore from Git** now picks any of the twenty most recent commits and pulls back the categories you tick — K-profiles, app settings, spool inventory and print history — without touching anything you did not select. The modal previews the commit before anything is written: it shows how many items each category holds and greys out the ones that commit does not contain, so a category you only enabled last week is visibly absent from older commits rather than silently restoring nothing. **Overwrite existing entries** decides what happens when something already exists locally — off, it fills in what is missing and leaves the rest alone; on, it makes the local row match the backup. The result panel reports what actually happened per category as restored, skipped and failed, and those three always add up to the number the preview showed you, so a count that does not match the preview is a bug rather than something to interpret. Restoring never resurrects a credential: the backup carries MQTT, LDAP, Home Assistant and Prometheus secrets so that a repository is a complete record, but the restore refuses every one of them, and refuses along with them any switch that would be left pointing at a service it can no longer authenticate to — an exposed Prometheus endpoint with no token is worse than one that stays off. The keys that decide who can reach the instance at all are refused outright for the same reason — the four authentication-policy switches, and the whole LDAP family alongside them, since those name *which directory server decides who you are* rather than how the instance behaves. Authentication is reconfigured through the auth UI, which has the guards that a JSON file does not. Print archives come back as history only, since a Git backup holds metadata and never the 3MF or thumbnail bytes, and each one is returned to its owner by username rather than by user id — an id means nothing on a rebuilt instance, where it would hand one person's print history to whoever now holds that number. An archive whose owner this instance does not have lands unowned with a note saying so, rather than being attributed to a stranger; one that already exists locally keeps the owner it already has, because an owner the backup cannot name is not an instruction to take one away. K-profiles are the one category that leaves the database: they are sent to the printer over MQTT, which means the printer must be online, and writing a slot is always an overwrite there regardless of the toggle — the modal says so before you click rather than in the summary afterwards. Cloud profiles are backed up but deliberately not restorable, as writing them means writing to a Bambu or Orca account rather than to this instance. **Restoring is permissioned per category**: `github:restore` opens the dialog, and each category additionally requires the permission that owns its rows — `settings:update`, `inventory:update`, `archives:update_all` and `kprofiles:update` — so a role cannot write through a restore what it cannot write through the page that owns it. Administrators hold all of them already; a custom role built around the Backup permissions alone can open the dialog and preview a commit, but needs the owning permission for each category you want it to be able to write. Each category is committed as it completes rather than at the end, so a large restore does not hold the database against the rest of Bambuddy for the length of the run; the trade is that a failure part-way through leaves the categories that already finished in place, which the result panel reports rather than claiming nothing was restored. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Edit the full print-parameter set from the slice dialog** — Slicing from Bambuddy meant taking a process preset as it came; any change meant a round trip through Bambu Studio. The slice dialog now carries OrcaSlicer's full process tree — pages, groups, labels, tooltips, ranges and defaults, extracted from the slicer's own sources rather than restated by hand. Which fields are available depends on the others, and those rules are evaluated from the slicer's own `enable_if` expressions through a small recursive-descent interpreter — no `eval`, so it runs under the Content Security Policy — with enum comparisons checked against each option's declared values. Anything the interpreter cannot decide is left editable rather than greyed out, on the principle that a field you can change is a better failure than one you cannot. Overrides apply after the source's support configuration (#1881) and the designer's carried tweaks (#2622), so an explicit choice always wins, and an untouched panel sends exactly the request it sent before. Adds `slice_engine` as a setting separate from `preferred_slicer`, since where slicing runs is a different question from which binary drives it.
- **A new G-code and model preview, built on the slicer's own renderer** — Sliced files previewed through a vendored copy of PrettyGCode in an iframe, which drew each move as a screen-space line. A line has no thickness in the scene, so it cannot occlude the layer behind it — which is why prints came out stringy and shimmered wherever layers crossed. Being a separate application in a frame, it could be neither themed nor translated, and it carried its own machinery for noticing when a proxy refused the embed. The viewer is now built on libvgcode, the renderer OrcaSlicer draws its own preview with, vendored from three-slicer under the same AGPL licence we ship under. The parser is ours, because upstream renders its own kernel's output and ships no G-code parser at all, and it was written against a real BambuStudio plate rather than against the OrcaSlicer and PrusaSlicer annotations that file does not use. The model preview was rebuilt alongside it: the camera is solved from the subject's bounding sphere against both fields of view instead of a flat multiplier, so a model fills a tall narrow panel instead of floating in the middle of it, and lighting moved from two directional lamps over flat ambient on a Phong material to a MeshStandard material lit through a generated room environment with ACES tone mapping — which is what stops a saturated filament colour clipping to white on its lit side and draining the hue. Translated in all locales.
- **Choose which rack nozzle each filament prints from on an H2C (#1784)** — The Vortek rack holds six hotends, and a multi-colour plate is sliced to use a different one per colour so it can skip the purge. Which of the six each colour takes is not recorded in the 3MF: the same plate, sliced and sent twice from Bambu Studio with a different choice each time, produces two files that differ only in rounding in the last digit of a few extrusion figures. The filament grouping, the toolchange stream, the 120 nozzle-change markers and `project_settings.config` are identical. The choice travels only in the dispatched nozzle mapping, and Bambuddy had no way to state it, so those plates went out with no nozzle assignment at all and the printer chose for itself — which is what levelled on one hotend and printed with another, millimetres above the plate. Every rack-bound filament now carries a position picker beside its AMS slot dropdown, listing all six with the nozzle each holds. A position that is empty, or holds the wrong diameter or flow type, is shown greyed out with the reason rather than hidden, so someone looking for position 4 finds it. The choice is per filament *group* rather than per slot, because a group is one hotend: two filaments the slicer grouped together share it and cannot point at different positions. Translated in all locales; wiki updated.
- **Home Assistant sensors on the printer card, with an optional print interlock (#1148, reporter @bsaunder; #448, reporter @baudneo)** — Bambuddy could already switch a Home Assistant entity as a smart plug, but it had no way to *read* one. A printer in a home-built enclosure with a door contact, or an A1 with an aftermarket chamber thermometer, had all that data in Home Assistant and none of it in Bambuddy — the reporter's actual problem being that he could not tell whether he had left the enclosure open before starting a print from his phone. **Settings → Smart Plugs → Home Assistant Sensors** now binds any `binary_sensor` — a door, window, smoke or moisture contact — or any `sensor` that carries a reading to a printer, and its state appears on that printer's card. The wording follows Home Assistant's own device class, so a door reads Open or Closed rather than On or Off, and a thermometer reads `41.2 °C`; entities with no device class fall back to on/off, exactly as Home Assistant shows them. A sensor can be given an alert condition — on, off, above a value, below a value — which highlights it on the card and unlocks two things it would otherwise be pointless to offer. **Notify on alert** sends a notification the moment the sensor enters that state, once on the way in rather than on every poll, and not again when a flaky contact drops off the network and comes back still alerting. **Hold prints while alerting** is the part that answers the original question without anyone having to look: queued jobs for that printer wait, with a reason on the Queue page you can read at a glance ("Waiting on Enclosure Door"), and start by themselves as soon as the door shuts. Nothing is ever cancelled, and a job queued as "Any X1C" simply goes to a sibling whose sensors are clear instead of waiting behind the one that is held. The interlock is deliberately one-directional: it holds only on a sensor that was read successfully and *is* alerting, so a Home Assistant that is unreachable holds nothing and the queue keeps running as though no interlock were configured. Sensors are their own thing rather than a smart plug with a wider entity filter — a plug carries auto-on, schedules, power alerts and "controls printer power", and the printer card's power button would have happily tried to switch a door contact. One backend poller reads every bound entity every 15 seconds and the cards serve that cached reading, so the cost to Home Assistant does not grow with the number of printers on screen or browser tabs open. Off by default in every respect: a newly bound sensor is display-only until you give it an alert condition, and both the notification and the interlock are separate opt-ins on top of that.
- **The Print Log shows how much filament a run used, and lets you choose its columns (#2636, reporter @ajbastien)** — The log view listed which filament a print used — a colour dot and "PLA" — but never how much, which is the number you actually want when reading back a month of prints. The amount was already on every row the API returned; the table was simply hardcoded to seven columns. **Filament Used** now has a column of its own, on by default. **Cost**, **Energy**, **Energy Cost** and **Finished** join it as columns you can switch on via a new **Columns** picker above the table, which also reorders them by drag or arrow keys and remembers the layout per browser. Every column header now sorts, too — click to sort, click again to reverse, with dates and amounts opening largest-first and text A-Z. The sort runs over the whole log rather than the page on screen, since a table that pages server-side would otherwise answer "the most expensive print among these 25"; changing it returns you to page 1, and rows with nothing in the sorted column are held at the end in both directions so sorting by cost or energy never opens on a screenful of blanks. That last part is explicit rather than left to the database: Postgres sorts empties high and SQLite sorts them low, so the same click would otherwise land differently depending on which one you deployed. These are per-run figures rather than the file's estimate: a print that failed part-way is scaled to the progress it reached, tracked spools win over estimates, and a multi-plate project dispatched a plate at a time counts only the plate that ran — so a row can legitimately differ from the whole-file total on the archive card. Energy arrives from a background task a moment after the print ends, so a just-finished run shows a dash until the measurement lands, which is the honest answer rather than a zero. Note the per-archive **Print Log** button opens a different, smaller table that has shown grams all along; this brings the two into agreement. Translated in all locales; wiki updated. Covered by frontend tests.
- **Auto-orient and auto-arrange when slicing server-side (#2548, reporter @ceokingcobra)** — A slice in Bambuddy always kept the placement the file arrived with, so several parts dropped onto one plate could come back overlapping, and a model resting on a face that needs supports stayed on it. Bambu Studio's two layout buttons simply had no counterpart here. Two checkboxes below the build-plate override now run the same passes before the slice: **Auto-orient objects** turns each object onto the side that prints best — the slicer scores candidate rotations on overhang area, contour and unprintability, and a test part here came out 8% faster with nothing else changed — and **Auto-arrange on the plate** lays the objects out so they no longer overlap, which is also the fix for a source file whose coordinates fall off the edge of a smaller target bed. Both are per-slice and off by default, and neither is stored on a preset or a pipeline: they rewrite placement an author may have chosen deliberately, so they are something you ask for rather than something that happens to you. They stay available on the "Slice as designed" path, unlike the preset dropdowns and bed type — these act on the geometry rather than the print config, so where the settings came from is irrelevant to them — and they carry across the automatic retry that falls back to a file's embedded settings after a slicer crash, which would otherwise hand back an un-arranged result you had in fact asked for. Arrange is project-wide inside the slicer, so pairing it with **Slice all plates** would collapse every plate's objects onto a single bed; Bambuddy takes the same per-plate loop it already used for cross-class re-slices and merges the outputs, since that hazard belongs to the flag and not to the one case that first ran into it — including on the "Slice as designed" path, and with the crash-retry suppressed there, because a retry is a single call that would have handed back one consolidated plate for a job you asked to slice as several. Orient needs no such handling — it rotates objects where they stand and never moves one between plates. A cross-class re-slice still arranges whether or not the box is ticked, because that pass is what keeps it clear of the H2D's per-nozzle dead zones. An unticked box is sent by leaving the field off the request entirely: the sidecar treats any value that is present as true, so a literal "false" would have auto-arranged every slice in Bambuddy. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Open a File Manager model in your desktop slicer, and pick which one from the 3D preview (#2725, contributor @pascalheidmann)** — The **Slice** action on a file card only existed when the optional slicer sidecar was running. Turn the sidecar off — which is the default, and how most installs run — and the File Manager offered no way to get a model into a slicer at all, even though the Archives page has handed files to a locally-installed Bambu Studio or OrcaSlicer over the URI scheme for a long time. The File Manager was simply the one place that never got it. **Slice** now appears on every unsliced model (`.3mf`, `.stl`, `.step`, `.stp`) in both the card menu and the list view, and does whichever of the two things your configuration means: with the sidecar on it opens Bambuddy's slice modal and the work happens on the server, and with it off it hands the file to your desktop slicer. The icon says which you will get before you click — a cog for server-side slicing, an external-link arrow for the handoff — and which slicer receives the handoff comes from **Settings → Workflow → Slicer → Open in Slicer**, falling back to the preferred slicer as it always has. The 3D preview goes further, because that is where you are actually looking at the model and deciding: its slicer button is now a split button, and the chevron beside it offers the alternatives without changing any setting. With the sidecar off that is the slicer you did *not* pick as your desktop target; with it on, the primary button still slices server-side and the menu offers a one-off desktop handoff to either slicer. Two things that used to be silent now are not: a handoff refused for want of permission raises an error toast rather than launching the slicer at a URL it cannot fetch, where a permission problem looked exactly like "no slicer installed"; and the file-type rule is shared between the card menu and the 3D preview, so a file can no longer offer **Slice** in one place while showing it greyed out in the other. Permissions follow the endpoint each mode calls — the handoff is a download and needs the same library read permission that lets you see the file, server-side slicing writes a new file and needs upload rights — and the action is shown disabled with the missing permission named rather than hidden. Translated in all locales; wiki updated. Covered by frontend tests.
- **Server-side slicing on an ARM64 host (#1900, contributor Felix Reissmann)** — The slicer sidecar ships as an amd64 image, so ARM64 installs had no server-side slicing at all and the compose file's own header said so. There is now an override file that pins the sidecar's platform to `linux/amd64` and runs it under emulation, with the setup written where it is read rather than a hop away in the wiki: binfmt has to be registered on the host or the container dies with "exec format error", and emulation costs roughly three to six times native slice time. The override only applies while both `-f` flags are on the command line and every other instruction in the README is written bare, so an ARM64 user following the update steps would have dropped the platform pin without noticing — a manifest error today, and a silent switch off emulation once native ARM64 images ship. The quick start now writes `COMPOSE_FILE` into `.env` instead, so the rest of the file works unchanged on ARM64; verified both ways. A separate x86_64 machine stays the recommendation — emulation is the fallback for people who have no second machine, not a replacement for one.
- **Temperatures on the streaming overlay, and a builder for its URL (#1422, reporter @SMAW)** — The overlay at `/overlay/{printer}` draws live print data over a full-screen camera view for OBS, a wall display or any browser source. It could already be tuned — which fields, what size, what frame rate — but only through query parameters documented in the wiki, and temperatures were not among the fields on offer. Both are now addressed. Nozzle, bed and chamber readings join the list, shown with the target while the heater is still climbing and with the target dropped once it is reached, so a settled hotend reads "220°C" rather than "220 / 220°C" for the rest of the print. Both nozzles appear on a dual-nozzle printer. They are drawn whether or not a print is running, since a preheating machine is exactly when they are worth watching, and each reading appears only when the printer genuinely reports it — chamber temperature stays absent on P1 and A1 models, which publish a value with no sensor behind it. And **Settings → API Keys → Streaming Overlay** now builds the URL for you: pick the printer, tick the fields, set size and frame rate, paste in a token if login is enabled, and copy the result, with an optional preview alongside it. The preview stays off until you ask for it so that leaving the settings page open does not hold a viewer on the printer's single camera connection. Making that preview possible needed one narrow change to the security headers: the overlay path now sends `frame-ancestors 'self'` instead of `'none'`, so Bambuddy's own UI can embed it. Every other page still refuses to be framed at all, `'self'` permits a framer only on this same origin, and embedding the overlay from another host — Home Assistant on a different port, say — is unchanged and still requires `TRUSTED_FRAME_ORIGINS`. Temperatures are not in the default field set, so an overlay URL already pasted into a scene looks exactly the same after upgrading. Translated in all locales, wiki updated, covered by backend and frontend tests.
- **Open a multi-plate sliced file on the plate you asked for** — Previewing a sliced multi-plate 3MF from the File Manager showed a plate nobody picked. The library route took no plate parameter at all, so the one the viewer has always put in the URL was dropped — FastAPI discards unknown query parameters silently — and both routes then fell back to the first `.gcode` member of the zip, whose order is whatever the slicer wrote. The reported file stores `plate_2.gcode` ahead of `plate_1.gcode`. Nothing that opens the viewer from the File Manager passed a plate either, so there was no way to ask for a different one. Plate resolution now lives in one place and both routes share it: an explicit choice that does not exist returns a 404 rather than rendering something else, and the default is the lowest-numbered plate rather than the first one in the archive. The viewer gained a plate switcher and keeps the choice in its URL, so a link to one plate survives a reload, and filament colours follow the switcher — they were previously taken from the first plate whichever one was on screen.
- **Show the plug that actually powers the printer in the card's Power row (#2830)** — A printer card has one Power row: a plug name, its draw, and the auto-off and on/off buttons. Which plug filled it was decided by nothing at all — the endpoint returned the first row the database handed back that was not a Home Assistant script, from a query with no `ORDER BY`. For the reporter that was an enclosure exhaust fan, added before the outlet their X1C is plugged into. The card showed the fan's name with `--` for watts, offered to switch the printer off by cutting the fan, and demoted the metered outlet to the small Home Assistant button row. The fan was marked as not powering the printer and hidden from the card, and neither setting was consulted here, though the same flag has decided the scheduler's power-on pick since #2629. The candidates are now ranked: switchable at all, controls printer power, enabled, shown on the card, reports power, lowest id. The first rules out a script, which can only be run, and a monitor-only MQTT plug, which the control endpoint rejects — and an MQTT plug is exactly the kind that reports watts, so without that ahead of the power tiebreak the row could land on a plug whose on/off button answers with an error. The last is not cosmetic: with no `ORDER BY`, a plain `UPDATE` on PostgreSQL can move a row and silently swap which plug the card calls the printer's power. None of the criteria excludes a plug outright, because a printer whose only plug is hidden, disabled or monitor-only still needs its Power row — that row is where the on/off button and the Home Assistant buttons live.
- **The Printers page remembers its status and location filters (#2833)** — Pick a location, navigate away, come back, and every printer was showing again. Both filters were plain component state, and they were the only preferences on that page that were not remembered: sort order, card size, view mode, collapsed sections and hide-disconnected all persist, each with the same shape. These two now do too. A saved filter needs a way out, though. The location dropdown only renders while at least one printer has a location, so a saved location that was later renamed or removed would match nothing and take its own dropdown off screen with it — an empty page and no control to undo it. A location that is not among the available ones now resets to all, and the same for a status the dropdown does not offer. That check waits for the printers query to resolve, because the list is undefined while it is in flight and acting on that would throw the saved filter away on every page load. Search stays unpersisted on purpose: a box that silently refills itself on return is a surprise rather than a convenience.
- **The external spool can be hidden from the printer card (#1782, reporter @Arn0uDz)** — An external spool holder that never gets used still occupies a full card's width in the **Filaments** row, next to the AMS units that are actually being used. An eye icon at the right-hand end of that row's header now hides it, and clicking it again brings it back, so nothing is lost behind a settings page you would have to remember. The choice is remembered per printer and stored in the browser, like the card size and the offline-printer filter — one machine in a fleet can be tidied up without touching the others, and nothing changes for anyone else using the same Bambuddy. The icon is deliberately absent on a printer with no AMS: there the external spool is the entire filament section, and hiding it would leave an empty row. That guard also covers the case of an AMS being unplugged from a printer whose external spool was hidden earlier — the spool reappears rather than leaving a blank row behind. On the H2D and H2S both external positions share one card and so hide together. Translated in all locales, wiki updated, covered by frontend tests.
- **Uploaded archives can be named after the filename you sent (#2610, contributor @Person2099)** — A 3MF carries a `print_name` inside its metadata, and that is the name an archive gets. It is often the wrong one: whoever originally sliced the file baked their own title into it, and that title survives every rename afterwards, so a file you deliberately named after the job it belongs to still lands in the archive list under a stranger's label. Bambuddy could already prefer the filename — the FTP review flow and virtual-printer dispatch both do, driven by the virtual printer's **Archive name source** setting — but the upload endpoints could not, so anything sent through the API was stuck with the embedded title. `POST /archives/upload` and `POST /archives/upload-bulk` now take an optional `prefer_filename_for_name` query parameter that names the archive after the uploaded file instead; on the bulk route it applies to every file in the batch. It is off by default, so nothing changes for existing callers or for the Web UI's own upload, which does not set it. A per-request parameter rather than a setting, because the caller — typically an integration naming files after its own jobs — is the only party that knows whether the filename it sent is the meaningful one. Both parameters are documented in the OpenAPI schema, so they show up in `/docs`. Covered by backend tests.
- **API clients can resolve user ids to names (#1894)** — Archives, the queue and statistics all report ownership as a numeric id, and statistics accept it as a filter, but nothing let an API key discover whose id was whose. The only user listing returns emails, roles, group membership and full permission sets, so it is administrative and rejects keys outright. There is now a slim user listing returning id and username only, behind its own read permission mapped to status-read. It grants no data a key could not already reach: for API-keyed requests the filter-by-user guard already short-circuits and the created-by filter is already honoured for every id — what was missing was the ability to address the filter, not permission to use it. The full listing stays admin-only. `/auth/me` was fixed alongside it, having answered an API key with a synthetic record rather than the key owner's own.
- **Record who queued a file from the Library and through the webhook API** — The queue's own-work permissions filter on who created an item, but only three of the paths that create queue items were setting it. The Library's bulk **Add to queue** required the create permission and then discarded the user it had just resolved, so every item it made was ownerless — and invisible to the person who added it if their permissions are scoped to their own work. That is the one path built for adding many files at once, which is where it was hardest to notice. The webhook endpoint has no request user, but an API key records its owner, which is the acting identity everywhere else a key is used, so its items are credited to that owner. Keys minted before per-user ownership have no owner and their items stay ownerless.
- **Forgejo tokens scoped to a single repository are accepted (#2775)** — The Forgejo connection test asked who the token belonged to before asking whether it could reach the repository, and treated a 403 there as fatal. A Forgejo v15 repository-scoped token may carry only read or write on issues and repositories, so it fails that call — and was rejected despite reaching its own repository perfectly well, which is all a backup needs: the push path uses the Contents API and restore reads commits, trees and blobs, all under the repository itself. That was the only call in the whole provider layer that asked about the user. The probe stays, because a 401 from it is genuinely conclusive and names a bad token before the repository call has to guess — Forgejo v15 and later hide a private repository behind a 404 rather than a 403, so the repository call cannot always tell those apart. Every other status now falls through to the repository check.
- **The MQTT debug log now records the commands sent to a printer, not only what it reports back** — **Printer → Debug → MQTT** captured one side of the conversation. Bambuddy listens on both of a printer's topics, but the one carrying commands returned before anything was written to the log, so a capture could show every status push the printer made and nothing it was ever told — including the commands Bambu Studio sends over the local network, which is the only place they can be observed at all. Those now appear alongside Bambuddy's own, grouped under the outgoing filter. It is what lets a question like "which value does Studio put in this field?" be answered from a user's capture instead of guessed at, and it is why #2774 could not be taken further. Commands Bambuddy sends appear twice, once as it publishes and once as the broker echoes it back, and the pair is itself evidence the command reached the broker. Logging is off until switched on, as before. Covered by backend tests.

### Changed
- **The L and XL printer cards now scale their text and icons, not just their width (#1848, reporter @misterff1)** — Switching a card from M to XL made it wider, enlarged the printer name and the thumbnail, and left everything else exactly as it was: the AMS slot labels, temperatures, filament names, status text and every small button stayed pinned between 8 and 11 pixels, well under the smallest size used anywhere else in Bambuddy. The result was a full-width card carrying the same tiny text as the compact one, which is precisely the opposite of what someone reaching for a bigger card is asking for. Browser zoom is not an answer to this, since it enlarges the entire page and so preserves the very disparity being complained about. The card body now scales along with the card: L draws it 20% larger and XL 40% larger, icons included, so the controls grow with the text rather than staying fiddly to hit. The AMS-HT card needed two adjustments of its own, since its temperature and humidity readings sit beside the slot rather than under it. Its single slot was the only thing on that row able to grow, so it swallowed every spare pixel and pushed the readings hard against the card's edge — it is now capped at roughly two ordinary slots, which keeps them clear at any card width. The card itself also gained a ceiling of one full AMS card's width, so a unit that wraps onto a line of its own no longer stretches that single slot across the whole card. S and M are deliberately untouched — S is the dense fleet view where density is the point, and M is the default, so an existing install looks identical until you reach for a size that is already asking for more room. Wiki updated. Covered by frontend tests.
- **The H2C nozzle rack card sizes itself to its contents and numbers its slots** — The rack card shared a row with the nozzle, bed and chamber readings but was given a 190-pixel floor plus twice their growth share to draw six fixed 28-pixel chips. On anything wider than a compact card it claimed several hundred pixels and left most of them empty, and the width came out of the cards that needed it — a combined dual-nozzle reading was wrapping "220 / 220" onto two lines beside a mostly blank rack. It now takes its content width and gives the remainder back, while still giving way on a narrow card rather than overflowing. Each slot also carries its physical rack position, 1 to 6, below the chip, so a nozzle can be named rather than counted along; the numbering is positional, so an empty slot keeps its number and "the nozzle in slot 4" means the same thing however many of the six are occupied. The chips also scale with the card now: they were a hard-coded 28 pixels at every size while the body type and icons around them grow by 20% at L and 40% at XL, so setting the card larger left a shrunken strip beside neighbours that had grown around it, with the diameter figures pressing against chip edges that had not moved.
- **The process-settings panel shows the preset's own values, and says why when it cannot** — The panel baselined every field on the option schema's compiled-in defaults, so a preset setting a 0.42 mm line width displayed 0 — the C++ default meaning "derive from the nozzle". Every field was affected; the line-width group just made it obvious. Bambuddy cannot answer this on its own: a standard-tier pick is only an `inherits` stub on our side, and local or cloud presets are deltas whose remainder lives in the profile tree bundled inside the running sidecar. The values now come from the sidecar's own resolve endpoint, which runs the same resolver a slice does against the same profiles, so what the panel shows cannot disagree with what a slice produces. Deliberately not the local profile resolver, which walks OrcaSlicer's published tree and can differ from the image actually installed. An untouched field shows the preset's value and reverting returns to it, and the modified marker compares against that baseline too, so fields the preset moved off the C++ default are no longer flagged as user edits. When the values cannot be read, the panel now names which of the four causes applied instead of collapsing them into one message. The overwhelmingly common one has an obvious fix and is not an edge case: an install pulls its sidecar as `latest` whatever channel Bambuddy is on, so a current Bambuddy talking to a sidecar that predates the resolve endpoint is the normal state rather than a misconfiguration, and those users would otherwise have seen an amber warning on every slice with nothing pointing at the sidecar image.
- **Pool AMS Filament Backup spools in the print dialog's filament check** — The dialog weighed each plate against the spool in the slot it mapped to and knew nothing about AMS Filament Backup, so a two-plate job needing 1441 g of ABS was refused against a 1000 g spool while the identical full spool in the next slot went uncounted. The dispatcher has pooled matching spools since #1762 and would have run the print — "Print anyway" was always the right answer to this warning. The rule for which spools back each other up now lives in one place that both the dispatcher's pool and the dialog's check draw on. The dialog groups on the keys it is handed rather than resolving spools a second time, which is what let the two answers drift apart in the first place, and which also gives the check to Spoolman users.
- **API keys can read and run slicer pipelines (#1425)** — Every pipeline endpoint answered 403 to an API key whatever scopes the key carried. The first pipeline PR parked all three permissions on the admin denylist until the run dispatch existed to decide about; it landed later and the parking was never revisited. Pipeline read now rides status-read, and pipeline run requires queue and library-manage together — a run slices into the library and then queues prints, so mapping it to either flag alone would hand that flag the other one's authority. A 403 now names every flag the key is short of. Pipeline write stays admin-only: a key can run the recipe, not rewrite it or clear the log. Opening the run route also needed the cloud-owner fallback the direct slice route already makes, since a pipeline can carry Bambu or Orca Cloud presets and resolving those reads a token off a user record an API-keyed request does not have.
- **Sort the inventory by colour (#2729, reporter @macwhiz)** — The Color column showed a swatch on every row but ignored clicks on its header, so the only way to find a shade was to sort by colour *name* — and filament names don't sort into anything useful, with "Abyssal Purple" landing at the top of the list nowhere near "Purple". The column sorts now, by the colour itself: ascending walks the rainbow, then the browns, then the neutrals from white through the greys to black, with any spool that has no colour recorded held at the end. The issue asked for a straight hue-then-saturation-then-lightness sort, and that turned out not to survive a real inventory — a grey is only a shade off neutral but still has a hue, and that hue can be anything. Measured against a 30-spool inventory, it put Titan Gray in among the blues and a warm grey next to the reds, while brown, being a dark orange by hue, split the oranges in half. So the colour family leads and the continuous sort the issue asked for runs inside each family, using the same classification that already names a colour when it isn't in the colour catalog — which means the Color column and the Color Name column can never disagree about what counts as brown or grey. Within the neutrals, hue is discarded rather than sorted on, for the same reason it isn't trusted to pick the family in the first place: they run light to dark instead. Multi-colour spools sort by their primary colour, since a spool has to sit in exactly one place. Works the same for internal and Spoolman-backed inventories, and in both the table and card views. Wiki updated. Covered by frontend tests.
- **Chamber temperature can now be set up to 65 °C, not 60 (reported on Discord)** — Every field in Bambuddy that takes a chamber target stopped at 60 °C: the per-filament chamber map and the per-print chamber override in **Preheat & Heat Soak**, the chamber quick-select presets, and the chamber temperature control on the printer card. 60 is the ceiling for the X1E, which was the only heated-chamber model when that limit was written; the H2 series (H2C, H2D, H2D Pro, H2S) and the X2D heat to 65, so the top of their range was simply unreachable — an ABS or PA profile calling for 65 had to be run at 60. The ceiling is now 65 everywhere, held in one constant on each side rather than repeated as a literal at every call site, so the four surfaces cannot drift apart again. X1E owners are unaffected: its firmware clamps a higher request to its own maximum. Wiki updated. Covered by backend tests.
- **Error and warning toasts now stay up twice as long** — Every pop-up notification disappeared after three seconds regardless of what it said. That is about right for "Settings saved", which confirms something you just did and is skimmed rather than read, but errors and warnings are a different kind of message: they carry a reason, often one relayed from the printer or the backend, and they run to a couple of lines. Three seconds was not long enough to finish reading one, and a missed error message is gone for good — there is no notification history to go back to. Errors and warnings now hold for six seconds. Success and informational toasts keep the three-second default, so the common case of clicking something and seeing it confirmed is unchanged, and the close button and the manual dismiss work exactly as before on all of them. The background print-dispatch toast is unaffected: it stays up while it has work in progress and clears itself shortly after the last job settles. Covered by frontend tests.
- **The bug-report button no longer covers the controls in the bottom-right corner (#2750, reporter @goodjaltman)** — On a phone the floating red button sits on top of whatever else is in that corner, which turns out to be most things: the scroll-to-top button on Profiles was ~83% underneath it and, since both sit at the same stacking level, which one you could actually tap came down to the order they happened to render in. The floating camera window parks there, as do the Group Edit save bar, the bulk-selection toolbars, and — because the button is pinned to the viewport rather than the page — the per-card action buttons on File Manager and Archives simply scroll underneath it. The reporter asked for a switch to hide the button, but it is the only way into the report form, and that form is not just a text box: it runs the printer connection diagnostic, scans your logs against the known-issue catalog, optionally captures five minutes of debug logging and attaches a support bundle. Hiding it doesn't produce smaller reports, it produces reports with nothing attached. So the button moves instead of disappearing. Once the window is narrow enough that the sidebar collapses into a menu button, the bug icon moves into that top bar and the corner is left alone; above that width nothing changes. That threshold is the one the layout already switches on, so there is no new breakpoint and no third state to reason about, and it covers tablets and half-width desktop windows rather than only phones. The report form itself is now a proper bottom sheet on phones, which also fixes it hanging 16 pixels off the left edge of the screen — it was sized to the full viewport width and then inset from the right, so a strip of the form was simply unreachable on anything under about 460 pixels wide. The scroll-to-top button on Profiles has been nudged clear of the corner as well, for the wide layouts where the floating button stays. Wiki updated. Covered by frontend tests.
- **The Docker update command is copyable, and knows where your compose file lives (#2664, reporter @pchulpjoost)** — Settings → Updates told Docker users to run `docker compose pull && docker compose up -d`, a command that does nothing unless you are already standing in the directory holding your compose file — which is exactly what you came to the page not knowing. There is now a copy button beside it, and the command includes the `cd` when Bambuddy knows where to send you. It can work that out on its own only when you bind-mount a subdirectory of that folder (`./data:/app/data` gives it away); the shipped compose file uses named volumes, which resolve to a path under Docker's own storage and say nothing about where your file is. Compose does record the answer on every container it creates, but reading it back needs the Docker socket mounted into Bambuddy — root-equivalent access to your host in exchange for a convenience string, which is not a trade worth offering. So there is a **Compose directory** field in the same panel, saved with the rest of your settings, and a `BAMBUDDY_COMPOSE_DIR` variable in the compose file for anyone who would rather keep it there. Leave it empty and the command is printed without the `cd`, rather than with a guessed path that fails on paste. The field accepts path characters only: it is the one setting whose whole purpose is to be pasted into a root-capable terminal, so a value like `/opt/bambuddy; rm -rf /` would otherwise render as a perfectly plausible update command. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Server-side slicing is no longer offered for STEP files** — The Slice action appeared on `.step` and `.stp` and the endpoint accepted the job, but neither slicer can load one from its command line. So the file was read, converted and uploaded before failing as "the input model file to the slicer can not be parsed", which reads as a corrupt model rather than an unsupported format. The endpoint now refuses a STEP up front with a message saying to export it as STL or 3MF, and the Slice and pipeline buttons no longer appear on one. **Open in Slicer** is unchanged and still hands a STEP to the desktop application, which opens it fine — that was always the working path. The two predicates are now separate so they cannot drift back together.
- **Form controls follow the page's colour scheme** — The parts of a form control the browser draws itself — a number input's stepper, a date field's calendar button and popup, a select's dropdown, scrollbars, the autofill tint — were painted in the light appearance on every theme. Bambuddy switches theme by swapping CSS variables under a class, which the browser cannot see, so it assumed the page was light and matched the steppers to a white background that was not there. Declaring the colour scheme alongside the variables fixes all of them at once, in both directions. Three date and time fields that had been pinned to dark by hand to work around this no longer need to be — being pinned, they were wrong on the light themes.
- **A print stage Bambuddy cannot name is now logged at INFO** — The stage table is hand-maintained and every new model adds to it, so a printer occasionally reports a number that is not in it and the card reads "Unknown stage (72)". An H2C did exactly that, where the table runs to 66 and then jumps to 74. Stage transitions were logged only at DEBUG, which is off in normal running, so the only record that it had happened was the card itself — and by the time anyone looked, the printer had moved on. The asymmetry is the point: a stage we can name is worth DEBUG, and the one we cannot is the interesting one. An unnamed stage is now logged once per stage number per session at INFO, with the model, the stage it came from and the print state at the time, which is what naming it afterwards needs. Named stages are unchanged, so a normal print logs nothing new.
- **The Slicer Bundles notice is gone from Settings** — Bundle import was withdrawn in 0.2.5 and the panel was kept behind as a static notice pointing at the alternatives. It has been on screen for several releases, it was shown to everyone running the slicer sidecar whether or not they had ever imported a bundle, and it was a card in **Settings -> Queue & Dispatch** that could not be acted on. The component, its render site and all thirteen locales' strings are gone, and the remaining columns rebalance to fill the space. No slicing behaviour is touched. Four docstrings that still described the removed feature as a live fallback were corrected at the same time.

### Fixed
- **An H2C levelled on one hotend and printed with another (#2800)** — An H2C ran its startup clean and bed levelling on one hotend, switched, and then printed several millimetres above the plate. The same job from Bambu Studio was fine. The H2C is the only model that mounts its nozzle from a rack of six, and a print command names that nozzle by physical rack position — the firmware reports those as 16 to 21 — not by the extruder index every other dual-nozzle printer uses. Bambuddy only ever had a rack position when a job arrived through the Virtual Printer, which captures Bambu Studio's pick and replays it (#1780); anything queued from the library, an archive, the webhook or a slicer pipeline carried none, so the field was omitted and the firmware chose for itself — and its choice need not match what the file was sliced for. The scheduler now derives the per-slot extruder assignment from the file it is about to send, and the MQTT layer resolves it against the rack position the printer reports live. Both halves are needed: the file knows which side a slot prints from, only the printer knows which hotend is in the carriage, and it can be swapped from the touchscreen between queueing a job and printing it. Two hardware-derived values were then corrected by the reporter's own A/B on real hardware. The rack is not on extruder 0 — a mixed-nozzle plate dispatched with the rack position on the wrong side printed several millimetres above the bed. And correcting only that is not enough, because the fixed hotend answers to physical id 1 rather than to its extruder index of 0, and forwarding the index produced a command the printer rejected outright. Translating both carriages gives the mapping the printer accepts, and the same sliced file then cleaned, levelled and printed on the correct nozzle at the correct Z through to completion. Both values agree with three native Bambu Studio captures from the same machine. The carriage assignment itself was inverted alongside: extruder index 0 was treated as the fixed hotend and index 1 as the rack, and it is the other way about. The printer's own telemetry, a Bambu Studio dispatch that completed, and the two constants failing to agree with each other all say so; the reasoning is now recorded at the constants so a future regression report is not re-litigated from scratch.
- **An H2C refused a multi-colour print as a hotend mismatch** — The print uploaded, the printer took the command, and stopped at once with HMS 0500-4047 — "the available hotend quantity or model does not match the sliced file". The nozzle mapping told the printer one of the plate's filaments went to no hotend while the AMS mapping named the tray it comes from, and the firmware will not start a job on that contradiction. Each filament in a 3MF names the group it belongs to, and on every other dual-nozzle Bambu the group number is also the extruder index, so it was read as one. On a rack machine it is not: the rack carriage holds six hotends to the fixed carriage's one, so the slicer writes a group per nozzle rather than per carriage. The failing plate carried groups 0, 1 and 2 against a two-entry map, and the filament in group 2 was dropped — indistinguishable downstream from a slot the plate does not print, which is what reached the wire. The group is now resolved through the table the file states for itself in its slice info. Files carrying no such table keep the direct index, so H2D slices are unaffected, and a filament that still cannot be placed drops the whole mapping with a logged reason rather than sending half an answer.
- **The nearest filament colour is picked, not the first one in tray order (#2804, #2823, contributor @grolmus)** — When the exact colour a plate asks for is not loaded, Bambuddy substitutes an eligible spool. It took the first eligible one in tray order, which is an arbitrary answer to a question that has a right one. It now ranks them, and the ranking is perceptual. The first pass measured RGB distance, which rates a colour by how far apart the numbers are rather than how far apart they look, and it overweights blue badly enough to invert the answer: against a required dark green, a purple was the nearer of two eligible spools by RGB and four times the further once measured properly. Both sides now use CIEDE2000, with the backend and frontend implementations kept structurally identical so they can be read side by side — verified against the published reference set to 1e-4 on all 31 pairs, and the two implementations agree to within 1e-9 across 800 sampled pairs. Eligibility is untouched, still the per-channel box, so this only reorders spools that already qualified. Filament type matching now agrees between the interface and the scheduler as well: Bambu firmware treats PA-CF, PA12-CF and PAHT-CF as one material and the scheduler has always matched them accordingly, but the interface compared raw type strings and called that same pairing a mismatch — so the badge contradicted what the printer was about to do.
- **Archives that arrived empty, from printers whose file service could not answer (#2780)** — Two faults behind the same symptom. Bambuddy reads a print's 3MF, cover and timelapse over FTPS on port 990, which on every Bambu model serves external storage only. Under some configurations H2-series and P2S firmware keeps the sliced file on internal storage, where Bambu Studio put it over a different service, and then no path on 990 can find it. The print command has always said which of the two it used, and we discarded the field and swept anyway: around 110 connections per print, every one certain to fail, ending in an archive card with nothing on it and no stated reason. In the reporter's bundle all 35 dispatches to their H2C and P2S said internal storage, all 25 to their X1C said external, and all 44 empty cards belonged to the first two. The field is now read, the sweep is skipped when it cannot succeed, and the reason is recorded. A printer that uses the card is unaffected, and so is one we have no answer for — silence is not evidence, and reading it as bad news would break archives that work today. The answer is held per print and dropped when that print ends rather than kept as a standing fact about the printer, because plenty of prints never announce themselves: 14 of the 79 print starts in that bundle arrived with nothing on the request topic, started from the printer's own screen or picked up after a restart, and one slicer print to internal storage left standing would suppress the lookup for every screen-started print after it. Separately, two printers went on printing while every archive they produced held nothing but a filename: Bambuddy opened port 990, the printer accepted the connection and answered with something that was not TLS, and the connection failure was indistinguishable to every caller from "the file is not at this path". So the 3MF lookup walked all six filename variants across five directories with four retries each, the cover endpoint ran its own sixteen-path sweep, and the timelapse scan added four more, all against a printer that could not have answered any of them — one reporter's log carried 1813 identical handshake failures, another's 3511. The evidence says this is the printer's own file service getting stuck rather than a model, firmware or TLS-configuration problem: in one bundle the same two printers ran clean for two weeks and failed from a fixed date, in another an X2D served files for five days, flipped, then failed every connection for eight days with no successes, while the same models and firmware appear in roughly twenty other bundles with no occurrences at all. A TLS error on connect now opens a five-minute cool-off for that printer, so a wedged printer is contacted twice an hour instead of hundreds of times a minute, and the single warning that is logged names the remedy. The sweeps stop early while it holds, and the cover endpoint returns a status naming the file service instead of a 404 that reads as a missing file.
- **A completion for one print closed another print's queue item (#2829)** — Bambuddy has no run identifier tying a completion to a queue row, so it finds the row by printer and printing status alone. Any completion delivered for a printer therefore closed whichever job was printing on it: the job was marked completed while the printer was still working, left the queue for history, and stranded the rest of its batch, because the queue correctly refuses to dispatch onto a busy printer. The handler now checks the completion against the file the row was dispatched with, recovered from its archive, and leaves the row alone when they disagree. Only a positive disagreement refuses — no archive, no file name or no subtask name is unverifiable rather than wrong, and refusing those would strand the item and wedge the queue, which is the failure the loose lookup was avoiding in the first place. That check then had to learn how the printer writes the name. It does not echo it verbatim: it substitutes underscores for spaces, so a title with spaces came back with underscores, the check refused it, and the row stayed printing — and since every printing row counts as a busy printer and nothing else ever closes one, that printer's queue stopped until someone cancelled by hand. It also truncates long names and marks the cut, which would have done the same to any long title. The comparison is now on the canonical form — case, spaces and underscores — which is the rule the 3MF lookup in the same module has always used for the same names, and a truncation marker is treated as a prefix match. The check keeps its purpose: the same printer the same day still correctly refused a completion for its own calibration run. One comparison being stricter than reality should not be able to stop a queue indefinitely either, so the scheduler now closes a row itself when it has been printing for five minutes after its printer went terminal, with the status that state implies. A real completion arrives within seconds, so this only ever sees rows that were already stranded, and a disconnected printer never qualifies. It restores the queue only — notifications, billing and auto-off are not replayed minutes late.
- **Deleting a library file destroyed the jobs queued against it (#2819)** — Nothing tied a library file to the queue rows pointing at it, and the foreign key that describes the relationship cascades on delete — which SQLite does not enforce and PostgreSQL does. So the same fault had two faces: rows left pointing at a file that no longer existed, failing at the printer with "library file not found" days later, or rows deleted outright with no error and no history. Two routes led into it, and both are fixed by taking the queue off the file before the row goes. In the reported case, a quantity above one on the printer card's upload-and-print flow puts a cleanup-after-dispatch flag on every copy and the clone carried the library file id onto each one, so the first dispatch consumed the file the rest were waiting on; the copies are now pointed at the archive that dispatch just created, which holds its own copy of the file.
- **A library-backed job was dispatched onto a spool that could not finish it (#2779)** — A job needing 20.5 g was dispatched onto a spool holding 9 g and the printer started. The source resolver returned the library file's stored path verbatim, but that column holds a path relative to the data directory — so it resolved against the process working directory, found nothing, and the deficit check treated a missing source as "nothing to verify" and reported no deficit. Every library-backed queue item was affected: slicer pipeline jobs, which are always library-backed, and everything added through the Library's bulk **Add to queue**. Both callers share the resolver, so the Play button on the queue was as blind as the auto-dispatcher. Archive-backed items were never affected, and neither was the print dialog, which resolves the file on its own path. The library branch now uses the same idiom as the eleven other readers of that column: absolute stays, relative joins the data directory.
- **A job queued to a printer class never powered a printer on (#2786)** — Queue a print against a printer class — "Any X1C", or a slicer pipeline whose target is a printer class — with every printer of that class switched off, and nothing happened. The job sat pending and no smart plug was touched, while the same file pinned to a specific printer powered that printer on within one queue check. The reporter's log holds both halves: thirteen minutes of the item being polled and passed over, then a change to a specific printer, then "attempting to power on via smart plug" on the very next tick. Same item, same plug, same auto-on setting. Powering a printer on had only ever been written inside the branch that handles a pinned printer. The model-based branch below it walks the same queue, but its matcher classes an offline printer as a reason to keep waiting and nothing on that path ever looked at plugs. It now wakes a printer of the class the same way the pinned path does.
- **Spoolman no longer charges a Bambu Studio print to the wrong spool (#2768)** — A sliced file numbers its filaments 1, 2, 3, 4, and which AMS tray each of those came from is a separate decision made when the job is sent. Bambuddy learns that decision one of two ways: it made the choice itself, for a print started from Bambuddy, or it read the print command as it crossed the local network, for a print sent from a slicer. A job dispatched from Bambu Studio while the printer is signed in to Bambu's cloud satisfies neither — the command travels through Bambu's own broker and never appears on the network Bambuddy is listening to. With nothing recorded, the Spoolman writer fell back to assuming the AMS was loaded in slicer order: filament 1 from the first loaded tray, filament 2 from the second. The reporter's X1C was loaded in the order 2, 4, 1, AMS-HT, so every one of the four was deducted from the wrong spool. It also changed what the print looked like afterwards: on completion Bambuddy stamps the archive with the material and colour of the spools it charged, so the print showed the right filament while it ran and switched to a different one the moment it finished — which is how the reporter noticed. The printer knew the answer all along. It publishes the running job's slot-to-tray assignment in its own status, and Bambuddy's built-in filament inventory has read that field for as long as it has resolved mappings at completion; only the Spoolman writer, which resolves at print start instead, never learned to. It now consults the same two fallbacks at the same moment: the printer's report first, and failing that a colour match of the sliced filaments against the loaded trays, which covers the A1, A1 Mini, P1S and P2S — those models publish no such field, so their owners were on the positional guess no matter how the print was sent. Reading the field at completion rather than at print start is deliberate: a printer keeps publishing the last job's mapping while it sits idle, so consulting it early risks stamping the previous print's mapping onto this one. A mapping Bambuddy or the slicer actually recorded is never second-guessed, so nothing changes for prints started from Bambuddy, from the queue, or over LAN. Cancelled and failed prints take the same correction, since partial usage is charged through the same mapping. The resolved mapping and where it came from are now logged at both print start and completion, so the next report of a wrong deduction can be read straight out of a support bundle. Wiki updated. Covered by backend tests.
- **"Any X2D" works on a printer that feeds from external spools instead of an AMS (#2771, reporter @Nick-C130)** — A fleet of five X2Ds with no AMS units, each printing PETG from its external spool holder, accepted a job sent to a named printer and refused the same job sent to **Any X2D**: the file uploaded, the printer answered "Failed to get AMS mapping table", and after three attempts the queue item failed. The two paths differ in one thing. A job queued for a named printer carries a filament mapping the browser worked out at the time you queued it; a job queued for a model has no printer yet, so the scheduler has to work the mapping out at dispatch — and its copy of that logic could not see an external spool on a dual-nozzle printer. On an X2D or H2D each filament in the sliced file names the nozzle it feeds, and Bambuddy will only offer a spool to the nozzle it is physically plumbed to. Which nozzle an external spool feeds was being read off a table the printer builds from its AMS units, so a printer with no AMS published an empty table, every external spool came back belonging to no nozzle at all, and the per-nozzle check discarded the only filament on the machine. Nothing matched, and the print went out claiming to use an AMS while carrying no mapping — which is the message the firmware was objecting to. The left and right external feeds identify themselves well enough to be routed without that table, and the printer reports its two nozzles directly, so both are now used. This is the same fault that was corrected in the browser last May for exactly this hardware; the scheduler kept the old logic, which is why the browser-resolved mapping worked and the scheduler-resolved one did not. Single-nozzle printers are untouched — they have no nozzle to route to and never took this branch. Separately, a job whose filament genuinely cannot be matched on a printer with no AMS now fails immediately and says which filament is missing and which nozzle wants it, instead of uploading several megabytes, collecting the firmware's error and failing anyway two retries later; where there *is* an AMS the firmware error still stands, because there the job can be recovered by loading a spool and pressing **Resume**. Covered by backend tests.
- **Live updates stopped arriving while the Bambuddy tab was in the background (#2754, reporter @mic4rd)** — The progress percentage in the tab title froze whenever you switched away and jumped straight to the current value the moment you came back, which defeats the point of putting it in the title. There were two causes, and the first fix only got one of them. Every printer status arriving over the WebSocket was written into the browser's cache from inside an animation-frame callback, and a browser gives a hidden tab no frames at all — those callbacks are not slowed down, they are held, so the connection stayed up, the messages kept arriving, and every one of them parked in a queue that only ran when the tab was shown again. The same applied to the archive, inventory and spool refreshes, and to the queue carrying every non-status message, which stalled completely. Removing the frames fixed that stall but not the report, because the write still went through a 100 ms timer that batches rapid updates — and a timer is exactly what a browser throttles in a tab you are not looking at, to roughly once a second, and to about once a minute once the tab has been hidden for five minutes. The reporter's screenshot showed a tab title reading 2% beside a page at 40%. That batching exists to stop a burst of messages causing a rendering pile-up, and a hidden tab is not rendering, so there is nothing to protect there: while the tab is hidden the value is now written straight through, and the batching still applies while you are looking at it. Worth knowing if you use Windows: a browser window completely covered by another window counts as hidden, not merely unfocused, which is why this could bite without ever switching tabs. Covered by frontend tests that reproduce a hidden tab, including one that never advances the clock — the earlier tests passed by simulating the very timer the browser was throttling.
- **LDAP login works again on directories that define no POSIX group class (#2769, reporter @peterskotte)** — Every LDAP user on an lldap directory was rejected with "Incorrect username or password", including users whose credentials, search filter and group membership all checked out when tested by hand with `ldapsearch`, and on an install where **Test Connection** reported success. The password was never the problem and the directory never saw the request. When resolving a user's groups Bambuddy looks for POSIX groups alongside the usual `memberOf` ones, and both of those searches name the `posixGroup` object class. The LDAP client validates class names in a filter against the schema the server publishes, and rejects an unknown one while building the request, before anything is sent. lldap marks every account it creates as `posixAccount`, which is what makes Bambuddy look for POSIX groups in the first place, but defines no group class beyond `groupOfNames` — so the search was refused, the refusal travelled all the way out of the login routine, and the login route reports any LDAP failure as bad credentials. A directory with no `posixGroup` class has no `posixGroup` entries, which is precisely the answer those searches would have returned, so Bambuddy now treats the refusal as the empty result it stands for, notes it once in the log and carries on with the `memberOf` groups. The reporter's mapped group is one of those, so it resolves as configured. This is not a regression from the recent primary-group work, though that is the natural suspect: the `memberUid` search has named the same class since LDAP support first shipped, and it runs for every user whether or not they have a `gidNumber`, so login has never worked against a directory of this shape. **Test Connection** passed throughout because it asks only whether any entry exists, a form of filter that carries no class name to validate. Nothing changes for Active Directory or for an OpenLDAP that loads the standard NIS schema — both define the class, and their POSIX groups are still read. Wiki updated. Covered by backend tests.
- **A hand-written systemd service left the Virtual Printer unable to start, with nothing obvious to blame (#2549, reporter @Ru3ck3)** — The Virtual Printer binds ports 990 and 322, both below 1024, which a service running as a normal user may not do without the `CAP_NET_BIND_SERVICE` capability. Without it the rest of Bambuddy works perfectly and only the Virtual Printer is dead: its sockets never open, the slicer never finds the printer, and the sole trace is one line in the journal. The reporter lost days to this before someone on Discord spotted the missing line. The install script has carried it since March, but the three other places that define the same service did not — the manual-install template, the combined Bambuddy plus SpoolBuddy installer, and the unit the wiki tells you to paste. All three have it now, and the wiki no longer claims the capability is always included when its own instructions omitted it. Bambuddy also diagnoses this itself: **Diagnose** on the virtual printer card previously reported only that nothing was listening on port 990, which reads identically to an ordinary port conflict. It now checks whether the process actually holds the capability and, when that is what is wrong, says so and gives the line to add. The check stays quiet when the port is answering, since fronting it another way (an iptables redirect is the documented alternative) is a legitimate setup, and it stays quiet when the capability is held, so a port that failed for some other reason is not misattributed. Existing installs are unaffected until reinstalled; the diagnostic tells you whether yours needs the line. Translated in all locales; wiki updated. Covered by backend tests.
- **Bambu Cloud's anti-robot challenge is explained instead of repeated (#2790)** — A reporter tried to connect to Bambu Cloud and got "we need you to confirm you are not a robot" as an error toast, with no challenge anywhere to answer and nothing to click. That sentence is Bambu's, not ours: their anti-abuse layer had flagged the network and was answering the sign-in with a challenge body. Bambuddy had no idea what that was. The reply is well-formed JSON, so the Cloudflare detection — which triggers on an unparseable body, on Cloudflare markers, or on particular statuses — never fired on it, and the login fell through to the generic error path, which lifts the message out of the body and hands it to the interface verbatim. The user was left to conclude their password was wrong or that Bambuddy was broken; four sign-in attempts inside eighteen seconds appear in their log, each one more evidence for the thing that had flagged them. The challenge is now recognised for what it is and explained, with what to do about it.
- **Interactive controls show a pointer cursor again (#2791)** — Hovering most of Bambuddy gave an arrow rather than a hand. Not everywhere, which is what made it read as sloppiness rather than as a bug: the update pill was inert while the buttons beside it were fine, a bed or nozzle tile responded but the history-graph button in its corner did not, and dropdowns went either way with no pattern behind it. The pattern was there. Tailwind v3's base styles set a pointer cursor on buttons; v4 dropped it to match the browser default, which for a button is an arrow. Bambuddy has been on v4 since the frontend was built and never had a base rule restoring it, so a button only looked clickable where someone had written the class by hand — 15 of 934 buttons had, 0 of 149 selects, and 19 of 130 checkbox and radio inputs. The 233 ad-hoc usages are why it looked arbitrary instead of uniformly broken. One base rule now covers buttons, selects, checkboxes, radios and summary elements.
- **A refused frame no longer leaves the browser's own error page inside Bambuddy (#2787)** — A reporter uploaded an STL, sliced it, and got a frowny icon and "refused to connect" when previewing the sliced file, while the STL's own preview worked. That is the browser's blocked-by-response page drawn inside our layout shell, and the split between the two previews is where the cause is: an STL or source 3MF renders in the page, a sliced file opens the G-code viewer, which is the only thing in Bambuddy that frames a Bambuddy page. Our own headers permit that frame and the frame is same-origin, so a refusal means a stricter header was added after we replied — a reverse proxy, a security add-on, an auth gateway — none of which the user could see. Bambuddy now says which header blocked it and points out that the viewer opens perfectly well in its own tab.
- **The Spool Inventory header no longer scrolls the whole page sideways (#2813)** — Five header buttons in a row that could neither wrap nor shrink came to roughly 600 pixels, so on a 390-pixel screen the header ran past the viewport and took the whole page with it, since the main element is the scroll container. They now stack on small screens and wrap, matching the pattern the Statistics, Settings and Archives headers and this page's own filter bar already use. Identical at 640 pixels and above. The System Information header had the same construction and gets the same treatment.
- **The Virtual Printer card header wraps instead of painting outside its border (#2808)** — Every item in the collapsed header refused to shrink, so the row was as wide as its contents and the card does not clip — the remote-interface address and the enable toggle painted outside the card border. The name's truncation could not save it, because a flex item does not shrink below its text by default. The metadata now wraps to a second line while the chevron, status dot and toggle stay outside that group. Wrapping rather than truncating, because the bind and remote-interface addresses are what the page exists to show. It needs three things at once to appear, which is why it took a report: both addresses set, a target named from discovery, and the three-column card grid.
- **The printer card thumbnail is back after navigating away and returning (#2826)** — The cover URL is cache-busted on the print name, which does not change while a print runs, so leaving the printers page and returning re-mounts with a byte-identical source — which the browser serves from its in-memory cache with no network request. That is why the reporter's network panel was empty while the placeholder sat there. The loaded flag could only ever be set by the load event, and a mount effect reset it unconditionally; for a cache hit those are two racing tasks with no ordering between them, and when the load event won, the effect undid it, with nothing to put it right afterwards because the URL does not change again for the rest of the print. The effect now reads the element's own state instead of assuming nothing has loaded, which settles it whichever task wins. Being a race is why it reproduced every time for the reporter and not at all here. Only the printer card was affected — archive thumbnails build a fresh URL every mount and always hit the network.
- **A slice failed on a model whose name contains a slash (#2832)** — A print's display name comes from inside the 3MF rather than from the filename, so a MakerWorld title arrives with its punctuation. The slice-to-archive sink used it verbatim for the output folder and the output file, and a slash in a folder name is not a character — it is another folder. Creating parents made the level it implied and the file's own join added a third that nobody had made, so the slice failed with a missing-path error on a path that half existed, and renaming the print first was the only way through. A display name is now reduced to a single path component before it becomes one. Characters a name cannot hold are replaced rather than dropped, so the folder still reads like the model's title, and the set is the one the SD card already rejects — which covers a Windows install too, where a colon fails the same way. The name shown in Bambuddy is untouched: a title is allowed its punctuation, and refusing the slash would reject the name this was reported about. The joins are now genuinely asserted to stay under the archive directory, which a stale marker had been claiming without it being true. The library sink takes the same embedded name and gets the same reduction — managed storage names the file after a UUID and never saw this, but an external folder writes the name as given.
- **A slice of a file on a network share was written to managed storage instead (#2810)** — Slicing always wrote to the managed library directory while giving the new row the source folder's id, so slicing a file on a NAS mount produced an output that showed up in the right folder in the interface and never reached the share — invisible from the web interface, which is why it did not reproduce. The destination is now resolved from the target folder the way uploads and moves already do, marked external, and stored with its absolute path. Collisions uniquify rather than failing, because a conflict would throw away minutes of CPU on a routine re-slice and overwriting a file on someone's NAS is worse. An external folder that cannot take the file falls back to managed storage rather than discarding the slice, and says why in a warning — silent fallback is what made this invisible.
- **A 3MF no longer switches off supports its process preset turned on (#2820)** — Since #1881 four support fields travel from the source file over the picked process preset, because the loaded settings are authoritative and Bambu's shipped presets all disable supports — so without the carry, a project exported with PVA in the interface slot sliced single-material. But the carry ran in both directions, and the off direction is the one nobody asked for: nearly every published model ships with supports off, so slicing one against a custom preset that deliberately enabled them stripped them back out. The reporter's preset enabled supports with a normal auto type; the slice came back disabled and tree auto, and only the style survived because it is not one of the four carried. The source can now switch supports on and never off. Nothing is lost, because every shipped preset has them off, so a preset that has them on is a deliberate choice.
- **An oversized model reads as an oversized model, not a slicer crash (#2802)** — The sidecar caps model uploads and reported a rejection as a bare 500 "file too large", because that error is not the sidecar's own error type and falls through to the default status. A 500 reads as a crash inside the slicer, and the one message Bambuddy had about request size was written for the status a reverse proxy sends, so it never appeared. The reporter tried three unrelated environment variables, stopped nginx, and moved from Windows to Docker, none of which the sidecar reads. The rejection is now matched by what it says rather than by its status, so an installation still on an older sidecar image gets the same explanation. The match is strict — the body must be only that message — because a genuine slicer failure is also a 500 and has to keep reaching the embedded-settings fallback. Old images are told to update, since they have no setting to change; current ones are told which setting to change. The update advice was wrong too: it told users to run a bare `docker compose pull`, and the sidecar is declared behind a compose profile, which compose skips silently — so the pull was a no-op for exactly the users the message was written for, and the restart policy kept the old container serving. The reporter pulled, restarted, raised the limit and got the same rejection, because the image never changed. Both commands now name the service, which enables the profile implicitly without pulling a second 220 MB image onto a host that never asked for it.
- **A preview slice no longer gives up on custom G-code the sidecar cannot parse** — Opening the slice dialog on an unsliced project runs a preview slice purely to ask the slicer which AMS slots the chosen plate consumes. Bambu Studio 2.8 writes a conditional into the machine's timelapse G-code but exports no definition for the variable it tests, so the template is unresolvable the moment it leaves Studio and an older sidecar stops with a placeholder parse error before producing any slice information. The preview returned nothing and the caller silently fell back to guessing from painted faces — on the H2D project this was found with, the guess dropped the support material, a whole slot off a four-filament plate. The preview is now retried once with just the named template emptied, still on the file's own settings. Keeping the embedded settings is what keeps the answer honest: overriding the process preset instead discards the project's support configuration, which loses that slot and moves the filament estimate by up to a factor of two. Measured against the same file, the retry reproduces all four slots gram for gram while a printer-and-process override returns three.
- **Bundled presets resolved to a generic start G-code block** — A bundled preset can keep a setting in a companion file the preset itself does not reference, which the desktop slicer finds by name. Walking only the inheritance chain never reached it, so every one of the 56 instantiable BBL machine presets resolved its start G-code to the 577-character generic block instead of its own 6.5 to 21 KB one. That block holds the AMS load and the claim-action calls, so a print sliced from it heats the bed, moves the toolhead and extrudes nothing. Companions are now folded into each ancestor as the chain is walked, at that ancestor's precedence, so a caller's own value still wins and the 0.2, 0.6 and 0.8 variants reach their 0.4 sibling's companion; they are found by listing rather than by a fixed set of keys. Covered against the shipped bundle rather than fixtures — a new end-to-end spec resolves all 56 presets inside the image and fails on any that still lands on the generic block.
- **AMS drying was torn down and restarted once per scheduler tick (#2801)** — A printer in FINISH with an unacknowledged plate and something pending in its queue stopped and restarted drying on every scheduler tick, for as long as the plate stayed unacknowledged; the reporter's Home Assistant history recorded about 2000 state changes over ten days. No cycle ever ran long enough to remove moisture, and cycles the user had started by hand on other AMS units of the same printer were torn down with them. Two concerns had become tangled. Plate-clear answers whether the bed is ready for the next job and says nothing about whether the AMS may heat, and the gap between a finished print and the acknowledgment is when drying is most useful — the printer is free and nobody is waiting on it. Leaving a plate unacknowledged is also how people hold the queue by hand, so the hold was costing them the drying it should have enabled.
- **Auto-drying re-armed into a threshold it could never reach (#2770)** — An H2D armed five twelve-hour drying cycles inside four hours, one of them six seconds after the previous one ended, and none ran more than a couple of hours. Two things combine. The firmware ends a cycle when it decides the filament is dry rather than when the clock runs out, and reports no fault doing it — across this printer's history the run length tracks how wet the spools were, from nearly the full twelve hours starting at 32% down to minutes once the unit sat at 10-13%. That part is the AMS doing its job. The loop is ours: an AMS reports a higher relative humidity while it is warm than once it has cooled, and the same unit read 10-13% cold against 15-20% through every cycle, so with the threshold set between the two the reading at the moment a cycle ended always re-armed the next one.
- **A drying cycle the printer abandons now says so, and says what the printer reported (#2770, reporter @tchavei)** — An H2D started a twelve-hour PETG dry at 65°C and the AMS gave up on it twenty minutes in, with 700 of the 720 minutes still on the clock. It then cooled off, humidity climbed back over the threshold, auto-drying started another twelve-hour cycle, and that one was abandoned the same way — a loop the reporter's AMS temperature history shows running all morning. The log had one line to say for it: `AMS 0 drying complete`, which is exactly what it says for a dry that ran its full twelve hours. Nothing in a support bundle told the two apart, and the remaining time — the one number that does — was written into the line as the *previous* value, where it reads like a duration rather than a shortfall. Bambuddy did not stop that cycle. Every stop it sends is logged with the full command as it goes out, and there was none, so ending it was the printer's decision — and the only account of why lives in three things Bambuddy already receives and parses but has never written down: the drying phase and sub-phase the AMS reports in its status word, the firmware's own cannot-dry reason codes (which distinguish an overheating unit from one being starved of power by a missing external supply), and whatever HMS errors are live at that moment. A cycle that ends with most of its countdown left now logs all three, alongside how much of the requested duration actually ran and how much was asked for. A cycle that reaches its configured duration keeps the single line it has always had, so a normal dry does not start reporting diagnostics nobody needs, and a cycle Bambuddy itself ends — the print-takes-priority stop, or the **Stop** button — now says so by name rather than being reported as an unexplained early end, since a stop is short of its duration too and looks identical in the telemetry. This is diagnostics only: nothing about when drying starts or stops has changed, and the repeated restart itself is not addressed here — what the firmware objects to has to be established before Bambuddy can sensibly decide how long to wait before trying again. Covered by backend tests.
- **A drying cycle no longer reports itself finished a minute after it starts (#2759)** — Starting the dryer on an AMS 2 Pro holding two PETG and two PLA spools and picking PLA showed "PLA @ 45°C" for about a minute, then switched to "PETG @ 65°C" for the remaining twelve hours. Bambu never echoes back which filament or temperature a cycle is running, so the badge reads the target Bambuddy cached when it sent the command — and that cache had been thrown away. Between accepting the command and settling its countdown the firmware publishes one update with the remaining time at zero while the unit is still in its Checking phase; the reporter's log caught 720 minutes, then 0, then 719. Bambuddy read the zero as the cycle ending. Losing the cached target left the badge to guess the filament from the first loaded slot, which happened to be PETG, and its RFID-recommended 65°C — a confident wrong answer for a cycle running PLA at 45. The same false ending also armed smart-plug auto-off-after-drying, so anyone with that switched on had power scheduled to cut one minute into a twelve-hour dry. A remaining time of zero is now only treated as the end of a cycle when the AMS also reports an idle phase, which the firmware already publishes alongside it; stopping a dry early still ends it immediately, and a unit that reports no phase at all still ends its cycles as before. The fallback guess has been tightened to match, in both directions. It names a filament only when every loaded spool agrees on one — on a mixed unit the badge shows the countdown alone rather than naming a spool the cycle isn't drying — and it no longer guesses a temperature at all. A unit loaded entirely with PLA does tell you what is being dried, but not at what temperature: that is picked freely when the cycle is started, so the spools' RFID-recommended value is never evidence of it, and a second AMS loaded only with PLA and drying at 45°C still read "PLA @ 55°C" whenever the cached target went missing. The badge now names a temperature only when Bambuddy sent it, and shows the filament and countdown without one otherwise. Covered by backend and frontend tests.
- **The drying badge invented a temperature on a uniformly loaded AMS (#2759)** — A second AMS 2 Pro with no auxiliary power, loaded entirely with PLA and drying at the 45 °C the reporter picked, showed 45 °C and then switched to 55 °C. Bambu never echoes back a cycle's filament or temperature, so both come from the target cached when the command went out, and the fallback for a missing cache reads the loaded trays. The first pass narrowed that fallback to units whose spools agree on a filament, which fixed the mixed-unit case in the original report but left the uniform case answering with the spools' RFID-recommended drying temperature. Agreement across slots is evidence of what is being dried, because the dryer heats all of them; it is no evidence of the temperature, which is picked freely in the popover. The badge now says nothing rather than guessing.
- **The drying popover no longer starts a cycle under a material you did not pick (#2774)** — An AMS-HT loaded with Support for PLA/PETG offered PLA in the drying dialog's filament list, and the cycle that started was labelled Support for PLA/PETG on the printer's own screen. Opening the dialog prefills it from the spool that is loaded, and Bambu reports that spool's material as `PLA-S` — a name Bambuddy's table of drying temperatures does not carry. The temperature and duration fell back to PLA's 45°C for twelve hours, which is what the dialog showed and what was sent, but the material did not fall back with them: it stayed `PLA-S`, and the dropdown, handed a value that is not one of its options, displays its first option without saying so. So the list read PLA while `PLA-S` was what left for the printer. Anyone who opened the dialog and pressed **Start** without touching the material was affected; picking any entry from the list, even the same one it was already showing, made the two agree again. The same gap covered every composite — a spool of PETG-CF, PLA-CF, ABS-GF or PAHT-CF prefilled the dialog at PLA's 45°C, far short of what those materials want, and sent its full name as the material. Bambuddy now resolves a spool's material to an entry the list actually has before either value is set, so what the dialog shows and what the printer is told can no longer disagree. Support materials and composites resolve to the material they are built on, so PLA-S dries as PLA and PETG-CF as PETG at 65°C, and nylon is recognised under the several spellings Bambu gives it. Anything genuinely unrecognised still falls back to PLA, deliberately the coolest setting in the table — under-drying an exotic filament costs a cycle, where defaulting to the hottest would deform a PLA spool. This does not address the other half of that report: a printer that keeps showing the material set from its own screen even when Bambuddy names a different one, which needs a capture of what Bambu Studio sends before anything can sensibly be changed. Covered by frontend tests.
- **A print that never starts now says AMS drying was running, instead of blaming the SD card (#2758)** — Sending a job to an X2D with two AMS units mid-drying failed silently: the file uploaded, the printer accepted it and then simply stayed idle. Bambuddy waited out the start watchdog, re-uploaded the whole 3MF, waited again, and after three attempts gave up with advice to check the printer's screen and the SD card — while Bambu Studio, asked directly, said it could not start the job because of the drying. Bambuddy now watches the AMS drying telemetry it already receives across the dispatch window and, when a job never starts while a unit was drying, names the units in the failure message and records the correlation in the log from the first attempt rather than only after the retries are spent. This is deliberately a diagnosis and not a rule: the printers concerned support drying *continuing* through a print, so drying and printing are not in conflict as such, and the report also involved one AMS drying without its external power supply — which would make the start-of-print calibration a power problem rather than a drying one. Stopping the cycle automatically would therefore be acting on a guess, and could tear down drying the hardware was happy to continue. Until it is known which of the two is the real obstacle, Bambuddy tells you what it saw and leaves the call to you. The message for a stalled dispatch with no drying involved is unchanged. Wiki updated. Covered by backend tests.
- **A refused AMS filament setting now says so in the log (#2756, reporter @Jostxxl)** — Configuring a slot publishes an `ams_filament_setting` command, and the printer answers it with a verdict. That answer was received and then thrown away at debug level, so a printer that refused the write left no trace at the log level support bundles are collected at. The reporter hit exactly that: six manual **Configure Slot** attempts on one X1C, every one returning success, every one read back by the #2582 verification as still holding the previous profile, and nothing anywhere to say what the printer had made of the command. A refusal is now logged with the printer's own `result` and `reason` alongside the AMS and tray it concerned. Only refusals are promoted — unlike the K-profile and drying commands this one is not rare, since every spool assignment and every K-profile re-apply sends one, and logging each acknowledgement would bury the line worth reading. The developer-mode probe is excluded as well: it sends this same command to the external slot specifically to watch it be refused on P1 firmware, so its failure is a measurement rather than a fault. Diagnostics only — nothing about which commands are sent or how they are built has changed. Covered by backend tests.
- **Configuring an AMS slot shows up on the printer card straight away, without a page reload** — Setting a slot to a different filament from the printer card left the card showing the old one. Nothing was lost: the command reached the printer, the printer applied it, and reloading the page or waiting out the thirty-second fallback poll showed the new filament. It simply never arrived on its own. Bambuddy compares each status push from a printer against the last one it broadcast and stays quiet when nothing has changed, which is what keeps a machine mid-print from flooding every open browser tab several times a second. The comparison looked at each AMS tray's slot number, material and load state — and **Configure Slot** writes none of those. It writes the filament id, the colour, the profile name and the calibration profile. So changing PLA to a different brand or colour of PLA produced a push that looked identical to its predecessor and was discarded, while changing PLA to PETG came through immediately because the material had moved. That is also why **Reset** always worked: it clears the material. The comparison now covers the filament identity as well, so every kind of slot change reaches the card. Those fields only move when someone configures a slot or swaps a spool, so this adds no traffic during a print — the amount of filament left, which does tick down continuously, is still deliberately excluded. Covered by backend tests.
- **Photos and filament accounting on archives that arrive without a 3MF (#1820)** — Two faults behind the same kind of print: one that arrives without a retrievable 3MF, which on an H2S is any job started from the printer's own internal library. Such an archive has no file path, and the empty path's parent is the current directory, so every site that derived the archive's folder from it landed on the data directory itself. The finish-photo capture spotted that and wrote somewhere else; nothing else did. The photo was written in one place and looked for in another — reads failed, deletes dropped the name and left the file, and the notification attachment never found the image. Hand-uploaded photos worked only because upload and read agreed with each other rather than with the capture. The question now has one owner and all four sites ask it, with lookups still checking the old shared location so photos already uploaded there stay reachable. Separately, the remaining-percentage fallback that stands in for a missing 3MF can charge nothing for several reasons and did so without a word. The AMS reading is coarse and, on the reporter's printer, noisy: it rises mid-print, swings five points over a job, sits at 100% through a 36-minute print on a fresh spool, and goes negative on a nearly empty one — which the start-of-print gate rejects, dropping the only slot that was printing. Two of their prints went uncounted for two different reasons and both read as "no spools updated", which is also what a print with nothing to charge reports. Each case now names the slot and the two readings, on the Spoolman path and on the internal-inventory path alike.
- **Home Assistant notifications carry nested data through unchanged (#1441)** — The pass-through flattened anything below the top level of a notification's data, so a payload with a nested structure — the shape most Home Assistant actions expect for anything richer than a title and a message — arrived at the other end reshaped. Nested structures are now carried through as given.
- **AMS Filament Backup no longer charges a whole print to the substitute spool** — Everything the completion path needs in order to split a print's filament across the trays it fed from lived only in memory: the dispatched plate and its slot-to-tray mapping, the spool-assignment snapshot, and the tray-change log. A print that outlived a restart lost all of it and fell back to what the printer reports at completion, which with AMS Filament Backup on is the substitute tray — so the whole print was charged to the spool that only finished it, while the spool that ran dry was charged nothing. That context is now persisted, tray changes are appended as they happen, and both the session and the printer's tray-change log are restored at restart recovery, seeded from the current tray when there is nothing to restore.
- **The Print Log is reachable again once you have no archives** — The Archives page decided it had nothing to show before it checked which view you were on, so with zero archives the "No archives yet" card replaced every view including the log. The Print Log is a separate table that deliberately outlives the archives it refers to — deleting an archive only clears the reference, and clearing the log is its own action — so purging archives hid a history that was still in the database, with no way back to it short of re-adding an archive. The log view now renders its own empty state instead of borrowing the archive one. Wiki updated. Covered by a frontend test.
- **The Print Log's cost and energy figures were never sent to the browser** — Bambuddy has been recording what each run cost and how much power it drew, but the two Print Log endpoints built their responses field by field and never mentioned `cost`, `energy_kwh` or `energy_cost`. A field nobody names comes back as its default, so the values arrived as nulls — indistinguishable from a column that genuinely holds nothing, with no error and no log line to say otherwise. The same trap had already swallowed the failure-cause classification once before. Both endpoints now validate straight off the database row, which removes the opportunity to forget a field rather than fixing the three that happened to be missing. Existing rows need no migration: the data was always there. Covered by backend tests.

### Security
- **Cleared every remaining `npm audit` and `pip-audit` finding** — A full dependency pass across both ecosystems. `react-router` and `react-router-dom` move to 7.18.2: the router advisory had been carried as a documented exception in the audit gate because its only fix was a major version, and upstream backported it, so the exemption lapsed on its own — an entry only holds while the fix is a major. The allowlist is now empty; the machinery stays for the next one. `dompurify` moves to 3.4.13, which ships in the application but on a path that is unreachable here — no hooks are registered and the in-place mode is never used. `js-yaml` and `nanoid` are overridden, both development-only and reached through eslint and postcss; the eslint path calls only the safe loader, on a legacy configuration file this repository does not use. Verified with eslint, the production build and the full frontend suite on the new versions.
- **Patched two build-time frontend dependencies flagged by `npm audit` (GHSA-r28c-9q8g-f849, GHSA-mh99-v99m-4gvg, GHSA-rgw5-rvv9-x895)** — `postcss` 8.5.15 → 8.5.23 fixes a path traversal in its source-map auto-loader (`sourceMappingURL`) that could disclose arbitrary `.map` files, and `brace-expansion` (pulled in transitively by `eslint` via `minimatch`) is bumped through the existing `overrides` block (`^5.0.7` → `^5.0.9`) for a denial-of-service via unbounded expansion. The first `brace-expansion` advisory was answered in 5.0.8 by capping the length of the combined result, but that cap covered only the accumulator the results are merged into and not the two intermediate arrays that feed it — so a small brace pattern could still exhaust the heap, fatally and beyond the reach of a `try`/`catch`, or stall the event loop for minutes. 5.0.9 bounds both arrays as they are built. Both packages are build/lint-time tooling only — neither is part of the shipped app, so no running Bambuddy install was exposed. `postcss` moved within its existing range; `brace-expansion` needed the pin because `npm audit fix` can't lift `eslint` to the patched transitive on its own.


## [1.2.5.2] - 2026-08-02

### Added
- **The print queue now shows when each job would finish (#2736, contributor @mpl1337)** — A queue row carried a job's print duration but not the clock time that maps to, so "if I start this one now, when is it done?" meant doing the arithmetic yourself, once per row — while the card for the running print has shown an ETA all along. Pending and staged rows now show one too, beside the duration, in your configured 12/24-hour format and styled to match the live one. It is deliberately a per-job answer and not a forecast of the whole queue: "start this now and it finishes at 14:30", not a projection of everything ahead of it. That only means anything for a job that could actually start now, so the ETA appears on exactly those. A job sits behind whatever is printing on its printer, and behind anything the scheduler would dispatch ahead of it — resolved in the same order the scheduler itself uses, including **Shortest Job First** when that is on — and stays quiet until it is genuinely next up, so three jobs stacked on one printer no longer quote the same finishing time three times over. Staged jobs are the exception in both directions: the scheduler skips them without claiming the printer, so they neither hold up the job behind them nor wait for it, and they show an ETA whenever their printer is free — which is the honest answer to "what happens if I press Start". Jobs scheduled for later, jobs blocked with a stated reason, jobs conditional on an earlier print succeeding, and jobs with no duration in their metadata show nothing at all. The time also keeps up with the clock instead of freezing at the moment the page was opened, and every row on screen is measured from the same instant, so two rows are always comparable. Frontend-only. Translated in all locales; wiki updated. Covered by frontend tests.
- **Keep the AMS slots the slicer picked (#2700, contributor @Striker72rus)** — Bambu Studio and OrcaSlicer resolve which physical AMS tray feeds each filament themselves, right before sending. Bambuddy threw that away: a queue-mode virtual printer worked the mapping out again at dispatch time, from the filament type and colour baked into the 3MF. That is usually the better answer — it is computed against the printer's live trays and it respects **Prefer lowest filament** and the AMS-backup gate that goes with it — but it has nothing to go on when the match isn't unique. Two spools of the same red PLA, and the slot you deliberately chose in the slicer is a coin toss. A new per-virtual-printer **Save AMS mapping** toggle keeps the slicer's pick instead: the print dispatches to exactly those trays, and the mapping is stored on the archive so a reprint can reuse the same physical spools — a **Mapping** button in the print modal selects every slot from it in one click, and the archive card and queue row say so. Because a tray number only means something on the AMS it was resolved against, the mapping records its printer and is only ever offered on that same printer; a model-based ("Any [model]") virtual printer has no fixed printer and is unaffected. Off by default, so nothing changes for existing virtual printers until you turn it on, and **Force color match** still wins for the print being dispatched when both are on. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **P2S/X2D accessory fans: left auxiliary cooling and chamber exhaust (#2691, contributor @gzimbric, requested in #2660)** — The P2S and X2D have two fans Bambuddy could not show or drive. The **left auxiliary part cooling fan** had no tile and no control at all, because the printer only reports it inside its air-duct data and never in the ordinary fan fields Bambuddy was reading. The **chamber exhaust fan** had the opposite problem: its tile appeared on every P2S whether or not the fan was fitted, so owners of a base machine had a control that did nothing. Both are add-on kits on the P2S and fitted at the factory on the X2D. Both tiles now appear only when the printer itself reports the hardware, so a base P2S looks exactly as it does today and a kitted one gains the fans it actually has. The left auxiliary fan is set from the same speed popover as the others, and the enclosure fan is labelled **Exhaust** on the P2S and X2D — matching the printer's own screen and Bambu Studio — while every other enclosed model keeps **Chamber Fan**. The confirmation message after changing a speed uses the same name as the tile that was clicked. The four tiles are ordered part cooling, left auxiliary, auxiliary, exhaust, so they read left to right in the same order as the physical fans. Both fields are also published through the status endpoint, the WebSocket feed and the MQTT relay, so external automations can read them. Translated in all locales; wiki updated. Covered by backend and frontend tests, including the case where the printer sends a partial fan report — a tile must not disappear mid-print just because one update didn't mention it.
- **Live print progress in the browser tab (#2693, contributor @Chachigo, requested in #1041)** — Watching a print meant keeping the Bambuddy tab in view, or switching back to it every few minutes. Enable **Print progress in tab** under Settings → Appearance and the tab title becomes `42% · Bambuddy` while the favicon turns into a progress ring in your theme accent colour, both updating live over the WebSocket the rest of the UI already uses. With several printers running, the tab follows the one finishing soonest, tie-broken by highest progress; title and favicon return to their defaults as soon as nothing is printing or the toggle goes off. Off by default, and stored per browser (like the light/dark toggle) so a wall-mounted dashboard and a laptop can each have their own setting. Translated in all locales; wiki updated. Covered by frontend tests.
- **Telegram notifications can target a forum topic (#1518, reporter @vmhomelab)** — Telegram groups with Topics enabled always received Bambuddy's notifications in the **General** topic, because only Bot Token and Chat ID were configurable. Getting a per-printer split therefore meant creating a separate chat per printer. The Telegram provider now takes an optional **Forum Topic ID** — the last number in a topic's link (`t.me/c/1234567890/25`) — and routes its messages into that topic, so a single group can carry one topic per printer. Left empty, the behaviour is unchanged. The ID is sent on both the plain-text and the thumbnail code paths, and is validated as a number in the form and again server-side, so a typo is reported instead of silently breaking only text notifications. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Support bundles now record Bambuddy's own memory, threads and child processes (#2734)** — A bundle described everything except the thing it runs in. That made reports of memory climbing over days impossible to act on: the numbers that identify what is actually growing only exist while it is happening, and by the time anyone asked, the container had been restarted. Bundles now carry resident and virtual memory, thread count, child processes by name, open files and sockets, process uptime, and a census of live objects by type. Those figures separate causes that look identical from outside — a large virtual size against a modest resident one is address space rather than data, a rising thread count points somewhere quite different from a rising child-process count, and the object census names what a growing heap is filling up with. The object census is skipped on processes already above 2 GB, because walking the heap costs most on exactly the process that can least afford it; everything else is still collected. Child processes are recorded by executable name only — an ffmpeg command line carries the camera URL and its password. Collection happens off the main loop and every metric is best-effort, so a hardened kernel or restricted container that refuses one of them still produces a complete bundle.
- **Folder rows in the File Manager now show when anything inside them last changed (#2680 follow-up, reporter @cadtoolbox)** — The calendar toggle only put dates on the file pane, so the folder tree had no way to show the timestamp it was already sorting on. Folders now render that value under their name whenever the toggle is on, nested folders included. It is labelled **last activity** rather than "last modified" deliberately: the value is the newest timestamp among the folder, its files and everything below it, so a folder can legitimately read as newer than its own directory mtime — calling that "modified" would look like a fresh instance of the `ls -lt` mismatch the issue was originally about. Folders with no activity render nothing rather than an `Invalid Date` placeholder. Frontend-only — the field was already on the wire from the sort fix. Covered by frontend tests.

### Changed
- **Debug logs now record what the printer reports between the last layer and the end of a print (#2547, reporter @anthonyma94)** — The finish photo wants a moment that Bambu firmware does not obviously announce: printing done, toolhead parked, filament unload not yet started. Bambuddy has been driving that capture from `stg_cur=22` ("Filament unloading"), which turns out to fire on no model at all — across 247 support bundles there is not a single stage-22 capture, including the window in which it was the only trigger in the code, where all 104 captures on A1, A1 Mini, H2C, H2D, P1S, P2S, X1C and X2D fell through to the after-the-fact fallback. Choosing a replacement was not possible from the bundles we had, because outside `stg_cur` and `mc_print_sub_stage` every stage and action field the printers send is dropped unread, and the most promising candidates (`print_real_action`, `mc_action`, `mc_stage`) are absent from A1, A1 Mini and P1S payloads entirely. With debug logging enabled, Bambuddy now dumps those raw fields for the window between the last object layer and the end of the print — opening on the first end-of-print signal (last layer reached, progress at 99+, or no remaining time), logging only what changed frame to frame, and closing on the state transition — so a single debug bundle per model can show whether any firmware marks that moment. Diagnostics only: nothing reads these values, they are printer telemetry with nothing identifying in them, and at normal log levels the probe does no work at all. Covered by tests for the window boundaries, the frame budget and the guarantee that the probe cannot break status ingest.

### Fixed
- **Bambu Cloud sign-in with a TOTP (authenticator app) account always failed with "Invalid code" (#2696, reporter @cmerkle)** — Every TOTP verification was rejected regardless of the code. Bambu Lab added double-submit CSRF protection to the `bambulab.com` web origin, which is where — and only where — Bambuddy posts the two-factor code; the endpoint refused the request with `403 CSRF error: missing_cookie` **before evaluating the code at all**, and Bambuddy surfaced that as "Invalid code". Reproduced against the live endpoint with a deliberately invalid key: a bare POST returns `missing_cookie`, `GET /api/csrf` mints a `bbl_csrf_token` cookie, a POST carrying only that cookie returns `missing_header`, and a POST carrying the cookie plus an `x-bbl-csrf-token` header reaches application logic. Bambuddy now performs that handshake before submitting the code. Note that landing on the sign-in page first — the intuitive fix — does **not** work: that page sets only Cloudflare's `__cf_bm`. **Also fixed:** a CSRF refusal no longer masquerades as a wrong code; it now says the code was never checked, so nobody else loses an evening to clock drift and leading-zero theories. Only TOTP sign-ins were affected — every other cloud call, including the email-code two-factor path, goes to `api.bambulab.com`, which is not gated, and existing stored tokens kept working throughout. Covered by tests that pin the exact header name and the origin used per region.
- **A2L AMS filament showed as "?" in Bambu Studio through the Virtual Printer, and manual filament picks reverted (#2697, reporter @qoatzelcoat)** — Every slot of the A2L's AMS Lite rendered as an empty question mark in the slicer's Device tab while Bambuddy's own AMS card showed type, colour and spool correctly; setting a filament by hand in Studio held for a second and then snapped back to "?". **Root cause.** The A2L reports its AMS Lite as physical unit id 16, but packs the slots' presence bits at bit base 24 — so Bambuddy normalises the id to 6 at the MQTT ingest boundary and every internal reader gets the right bits. The Virtual Printer's bridge, however, parses the printer's raw payload itself (by design — the slicer-facing cache has to keep the physical ids, since Bambu Studio addresses the Lite as 16) and so still held id 16 when it ran the shared empty-slot cleanup. That cleanup read bits 64-67, where nothing is ever set, concluded all four slots were empty and wiped `tray_type`, `tray_color`, `tray_info_idx` and the RFID fields from the copy sent to the slicer — once per second, which is also why a manual pick could not survive. **Fix.** The presence-bit helper now folds the physical id 16 onto the same bit base as the normalised 6, so it computes bits 24-27 whichever id reaches it; the cached ids the slicer sees are left untouched. Only the A2L was affected — every other AMS type already reached the helper with an id whose bit base was correct, and Bambuddy's own printer card was correct throughout. Confirmed against the reporter's debug log, which shows the cleanup clearing slots at bits 64-67. Covered by tests pinning the bit base for both ids and a bridge-level regression test built from the reporter's capture.
- **The Settings page no longer reverts settings changed from anywhere else (#2716, reporter @jmoore-skild)** — While the Settings page was open it held its own copy of every setting and only ever took one from the server, on first load. A background effect then compared that copy against the server's and saved the whole thing back on any difference — with no way to tell "the user edited this field" from "this field changed on the server". So anything written while the page sat open was silently undone: a change made in a second tab, another user's change on a shared install, a restore from a backup. It needed no click to trigger. The page's data goes stale after a minute and refreshes when the window regains focus, and around thirty other places in the app read the same settings, so a refresh from any of them was enough — after which the page wrote its page-load copy back over all 77 settings it manages, and showed **Settings saved** while doing it. The page now keeps track of the last server state it reconciled with. A field still matching that state has not been touched, so a newer value from the server is adopted and displayed; a field the user has edited keeps their value and is saved over the top, so the newer of the two writes wins either way. Typing into a text field while a refresh lands is still safe, which is what the old behaviour was protecting. Covered by frontend tests.
- **A rejected K-profile write is now reported as rejected (#2718, reporter @jmoore-skild)** — Saving a K-profile was fire-and-forget: Bambuddy published the command and reported success the moment the bytes left the process. The printer does answer, and the answer was received, matched, and thrown away at debug level — so a write the printer refused for a real reason still told you it was saved. The complication was that the answer itself was wrong: on single-nozzle printers it came back `result: "fail", reason: "invalid tray_id"` on writes that demonstrably applied, which made gating on it look impossible. Measuring against an X1C and an H2D found the cause — the `tray_id: -1` Bambuddy itself put in the payload. The X1C's firmware validates that field and rejects the value while applying the write anyway; the H2D ignores it. Sending `0`, as BambuStudio does, makes the acknowledgement honest, and the printer echoes back the sequence number we sent, so it can be matched to the write that caused it. Saving or deleting a profile now waits for that answer and surfaces a genuine rejection as an error instead of a success toast. A printer that stays silent is still treated as success — no answer is not evidence of refusal. The acknowledgement is also logged at INFO now, so it appears in a support bundle. Covered by backend tests.
- **The K-profile flow type is a real choice again** — On most printers the calibration table comes back with no nozzle identity at all, and Bambuddy had started showing "Not reported by printer" in the Flow Type field as a result. That is not a value you can save, and it isn't what the slicer does: BambuStudio treats a missing nozzle identity as **Standard** and leaves the choice editable. Bambuddy now does the same. The field is hidden only on models sold with a single nozzle variant — the A1, A1 Mini and A2L — using the same rule the slicer applies. This is not the single-versus-dual-nozzle split: the P1P, P1S, P2S, X1, X1 Carbon, X1E and H2S are all single-nozzle and all offer both flows. Editing a profile also no longer strips the nozzle identity from what it writes back.
- **Dialogs no longer act after they have closed** — The AMS slot configuration and K-Profile dialogs hold their success state briefly and then close themselves, between 1.5 and 4 seconds after the command is sent so the printer has time to process it. That timer ran whether or not the dialog was still open, so dismissing it — or the printer card refreshing underneath it — within that window left a pending close that fired later, dismissing whatever dialog happened to be open by then. The deferred close is now cancelled when the dialog goes away. Covered by frontend tests.
- **A printer with no K-profiles can now be given its first one (#2719, reporter @jmoore-skild)** — **Add K-Profile** built its Filament dropdown out of the profiles already on the printer, so on a printer with none the field was empty, required, and impossible to satisfy — the modal even said so, telling you to go and create the profile in Bambu Studio instead. The filament picker is now populated the way every other one in Bambuddy is, in the same order: **Imported** presets first, then **Orca Cloud**, then **Bambu Cloud**, then Bambuddy's built-in Bambu filament table. That last tier is compiled in, so the list is never empty — a brand-new printer with no cloud account and nothing imported still gets you a profile. The per-printer-model copies a cloud account carries ("Bambu PLA Basic" once for the X1C, once for the P1S, once for the A1) are collapsed into a single row, and the built-in table — a static copy of the same Bambu catalogue — no longer echoes back filaments the groups above already list. Your imported and Orca Cloud libraries are both shown in full even where they overlap by name, because they are usually the same profiles reached two ways and each group is worth seeing under its own heading. The picker is a searchable list with the source heading shown as a real, legible group header — a native dropdown can't do that, since browsers render the group label of a `<select>` in small grey italics and ignore styling on it. Imported and Orca Cloud presets carry no Bambu filament ID, and the printer indexes its calibration table by one, so those are filed under the closest generic for their material — the same rule the AMS slot configuration already uses, so a profile created here matches the slot configured there. A filament whose material Bambuddy can't place is refused with an explanation rather than written under a wrong ID. Also drops a second, redundant K-profile fetch the old dropdown needed: it ran concurrently with the main one whenever a non-0.4mm nozzle was selected, which is exactly the case that made K-profile requests time out. Translated in all locales; wiki updated. Covered by frontend tests.
- **K-profiles no longer all report 0.4mm / High Flow (#1748, reporters @Liquidmasl and @jmoore-skild)** — On any printer running a nozzle other than 0.4mm, every K-profile showed up as `0.4` with a flow type nobody had set, and the same profile disagreed with itself: the list said **S**, the edit dialog said **High Flow**. The printer reports the nozzle diameter once, on the response envelope; the individual profile entries carry no diameter and no nozzle id at all. Bambuddy read the diameter *per entry* and fell back to a hardcoded `0.4` when it wasn't there — which was always. The envelope value is now used, so profiles report the nozzle they were actually calibrated for. This was not only cosmetic. Editing a profile is delete-and-re-add on single-nozzle printers, and the dialog rebuilt the nozzle fields from its own (greyed-out) dropdowns, so saving an untouched 0.6mm profile rewrote it on the printer as 0.4mm High Flow. Deleting one aimed the command at the wrong nozzle for the same reason. Both now pass through exactly what the printer reported. Assigning a spool's stored calibration to an AMS slot was affected too: that lookup matches on nozzle diameter, so on a 0.6 or 0.8 nozzle it never found the printer-side entry and the cali_idx silently failed to stick — the "can't auto-map a K-profile" half of the report. Where the printer sends no nozzle id, Bambuddy now says so instead of picking one: the list shows the diameter alone, the dialog shows **Not reported by printer**, and the High Flow / Standard filter is hidden rather than offered as a control that can only ever empty the list. Also fixes the flow type filter selecting the opposite label when naming a new profile. Translated in all locales. Covered by backend tests.
- **K-profile requests no longer time out when two run at once (#1748)** — Fetching profiles for one nozzle size while another fetch was open made the first one time out, with `Failed to get K-profiles after 3 attempts` in the log, even though the printer had answered both correctly. Responses were matched to requests by nozzle diameter held in a single shared slot, so the second request overwrote the first's expectation and the first's valid answer was discarded as a mismatch. Requests are now correlated by the sequence id Bambuddy already sends and tracked one entry per request, with the old nozzle match kept as a fallback for firmware that doesn't echo the id back. An unsolicited broadcast arriving mid-fetch also no longer replaces the profile list the fetch is waiting on. Covered by backend tests.
- **Git backup now actually writes cloud profiles (#2717, reporter @jmoore-skild)** — Enabling **Cloud Profiles** for a Git backup produced nothing. The collector looked for a `setting` list in the Bambu Cloud response, which is keyed by preset type instead, so the loop never ran once — and it asked for the credential store used when authentication is *disabled*, so on any install with authentication on it found no account to collect from in the first place. Neither failure was visible: `backup_metadata.json` still recorded `cloud_profiles: true`, and the log line read `Collected cloud profiles: 0 filament, 0 printer, 0 process`, which looks like a successful backup of an empty account. Cloud profiles are now collected from **every connected account across both Bambu Cloud and Orca Cloud**, one directory per cloud per account, keyed by user ID so no email address is written into a backup repository. Bambu presets are stored with the payload needed to recreate them rather than just their names, and Bambu's bundled public catalogue is skipped — it is identical for everyone, re-downloadable, and would rewrite the repository on every run. The metadata now records what was actually collected, per cloud and per account, and a run that collects nothing while the category is enabled says so as a warning instead of an INFO line that reads like success. The Cloud Profiles checkbox no longer keys off your own Bambu sign-in — it enables when *any* account is connected and shows how many are in scope, which matters on a multi-user install where the presets being backed up are other people's. A backup also no longer disconnects an Orca Cloud account whose session it can't refresh: Orca reports every rejection with one composite reason, so a genuine revocation is indistinguishable from a lost token-rotation race, and an unattended job should not be the thing that guesses. The account is skipped with a warning, and the dead credentials are cleared the next time you open Orca Cloud Profiles — where you can pair again on the spot. Translated in all locales; wiki updated. Covered by backend tests.
- **A heavy model failed to slice after five minutes with "Slicer sidecar unreachable" (#2730, reporter @kpp39)** — A MakerWorld model that Bambu Studio also takes a long time over never finished slicing in Bambuddy: five minutes in, it failed claiming the slicer sidecar could not be reached. **Root cause.** The slice request carried a fixed five-minute limit covering the whole operation, and it was applied to the wrong thing. Slicing is a single long request, so the limit was a ceiling on how long a model was allowed to take — not a check on whether anything had gone wrong. When it expired, the resulting error was indistinguishable from a genuine connection failure, so a slice that was progressing normally was reported as an unreachable sidecar. The reporter went and updated their sidecar container, which was never the problem: it was reachable throughout and still slicing when Bambuddy hung up on it. **Fix.** Bambuddy already polls the sidecar once a second for progress — that is what drives the live progress toast — so it can tell a slow slice from a stuck one, and now does. The limit applies to *silence*: a model that keeps reporting progress runs to completion however long it takes, and a slice is only abandoned when the slicer has said nothing for the configured period. The new **Slicer stall timeout** under Settings → Workflow → Slicer sets that period, defaulting to fifteen minutes, and the failure message now says the slice ran out of time and where to change it rather than blaming the connection. Sidecars too old to report progress have no liveness signal to offer, so for those the setting still bounds total slicing time — the previous behaviour, but configurable and no longer five minutes flat. A sidecar that genuinely cannot be reached still fails immediately and still says so. Translated in all locales; wiki documents the setting. Covered by tests for a slow-but-progressing slice completing, a stalled one failing, a frozen progress report not counting as progress, the two failure messages, and the setting falling back safely when unset or unparseable.
- **Deleted prints stayed in their project as cards with broken previews, and could not be removed (#2731, reporter @sroesner)** — Deleting a print that belonged to a project left it on the project page with a missing thumbnail, and there was no way to unassign it. **Root cause.** Deleting a print is a soft delete by default: the files go from disk, the row stays so Quick Stats keeps counting its filament, time and cost. Every other part of Bambuddy skips those rows — the projects module skipped none of them, so a deleted print kept its project link and kept being listed, pointing at a thumbnail that no longer existed. The same broken previews appeared on the project cards in the overview, not just the detail page, and in the project timeline, where clicking the entry led to an archive that no longer opens. Unassigning was impossible because the only way to change a print's project is from the Archives page, which correctly hides deleted prints — so the entry could be seen but never reached. **Fix.** A deleted print now leaves its project everywhere: the archive list, the card previews, the timeline, and the counts. Excluding it from the *counts* is a deliberate difference from how Quick Stats treats the same print — a project is a piece of work with a definite membership rather than a lifetime total, so a project that lists eleven prints should not claim twelve. Existing broken entries disappear on upgrade with nothing to clean up; the API can still clear a stale link if anything needs repairing. Two more places were counting deleted prints for the same reason and are fixed with it: the archive CSV/Excel export handed back rows the interface says are gone, and per-project failure analysis measured a failure rate against prints that had been deleted from the project. The project page also no longer needs a manual reload to catch up: deleting a print refreshed the archive list but nothing project-related, and assigning a print to a project refreshed the project cards but not the project page itself, so for the following minute either view could still be showing what was there before. Covered by tests for the listing, the card previews, the timeline, the counts, both services, the cache refresh, and a guard that a project's live prints are untouched by any of it.
- **A printer refusing Bambuddy's commands looked healthy, and its queue failed with the wrong advice (#2732, reporter @hennischd)** — Uploads succeeded, the printer echoed the job back, then sat idle for 270 seconds and the job was re-uploaded twice more before failing with a message about SD cards. Temperature changes returned success and did nothing. The connection diagnostic passed every check, and the support bundle said Developer Mode was on. **Root cause.** The printer was rejecting every control command and saying so: HMS `0500-0500-0001-0007`, "MQTT command verification failed" — the firmware's authorization check, which Bambu Lab documents Developer Mode as the way to disable. Nothing in Bambuddy connected that to anything. The error itself was received and then discarded by the frontend, because this code's meaning lives in bits that Bambuddy's short-code form throws away: it collapses to `0500_0007`, matches no catalog entry, and uncatalogued errors without firmware actions are filtered out of the badge count and the error list. Meanwhile the Developer Mode probe reads any response that isn't an explicit refusal as confirmation, and this firmware answers the probe with an empty result while refusing everything else — so Bambuddy inferred a healthy printer from a non-answer, and reported that inference as a passing diagnostic. **Fix.** HMS codes are now looked up by their full identifier before the short form, so this error survives to the screen, shows the four-group code the printer's own display shows, and carries the fix rather than Bambu's "update Studio or Handy" (which does not apply to a print sent from Bambuddy). The error is treated as authoritative about the printer's state: it sets Developer Mode to off regardless of what the probe concluded, which makes the diagnostic and the support bundle report the real situation, and it clears itself when the printer stops reporting it, so enabling Developer Mode and restarting is picked up without restarting Bambuddy. The probe no longer reads an inconclusive answer as confirmation — it reports what it knows, which for this firmware is nothing. A queue item whose command is rejected now fails on the first attempt naming the code and the fix, instead of spending three uploads and fifteen minutes of a farm's upload capacity to arrive at the wrong conclusion; a print that is visibly running is never touched, whatever HMS is lingering. Separately, the log hint suggesting a wrong or mis-cased serial number no longer fires in the moment after a reconnect, when the report counter it reads has just been reset and proves nothing — it cost this reporter a detour through their serial number on a printer whose serial was correct. Translated in all locales. Covered by tests for the code surviving the filter, the display form, the developer-mode override and its self-clearing, the inconclusive probe, first-attempt failure, the running-print guard and the suppressed hint.
- **A printer that dropped off MQTT could stay offline indefinitely (#2732, reporter @hennischd)** — In the same bundle, the printer lost its MQTT session to a keep-alive timeout at 02:19 and did not come back until 11:24 — nine hours offline, with the web UI open the whole time. Bambuddy's stale-session detector only covers the other failure: a session that is still connected but has gone quiet. Once the connection is *down*, it returns immediately and the MQTT library's own retry is the only thing still watching; when that stops making progress, nothing notices. Bambuddy now runs a backstop sweep every minute. A printer that had a working session, has been silent for five minutes, and still answers on its MQTT port gets its client rebuilt from scratch with a fresh session — which also drops any command left unacknowledged on the dead one, so it cannot replay into the new session. Printers that are simply switched off are left alone: the port check tells the two apart, so there is no client churn and no nightly log spam for a farm that powers down. The rebuild is rate-limited per printer and never touches a connected one, and the log line names how long the printer was gone and what the last connection error was, so a session that dies repeatedly leaves a trail. Covered by tests for the recovery itself, the grace period, the switched-off case, the retry interval, and a farm sweep continuing past a printer that throws.
- **A slot on Generic PLA offered only one K profile, however many the printer held (#2710, reporter @tommyboy180)** — The printer's Flow Dynamics table held nine calibrations, all of them under Generic PLA; Configure AMS Slot offered exactly one, the one already bound to the slot, and after a slot reset it offered none at all. The only way to assign the others was Bambu Studio. **Root cause.** Two independent faults, both triggered by picking a built-in generic preset. First, K profiles are matched to the selected preset by filament ID, but matches on Bambu's generic IDs (`GFL99` for Generic PLA, `GFG99` for Generic PETG, and so on) were deliberately thrown away as too broad — and since the comparison already requires both sides to carry the *same* ID, that exclusion could only ever fire when the chosen preset was itself the generic one, which is precisely the case where the match is right. Second, the matcher read the leading "Generic" in "Generic PLA" as a manufacturer, and so demanded the word "Generic" appear in the K profile's name; no real profile has it, which killed the name-based fallback as well. The one profile that did show up came from an unrelated safety net that always surfaces the slot's active profile, and a reset slot has none — hence the empty list. **Fix.** A K profile whose filament ID equals the selected preset's now matches, generic or not: the printer keeps one calibration table per filament ID, so a slot on Generic PLA offers everything calibrated under Generic PLA, whatever the user named those entries — "Dark Brown", "Marble", "Glow" and the rest now all appear. "Generic" is no longer treated as a brand, so profiles still match by material when a printer reports no filament ID at all. Since no name-and-ID matcher can be perfect against profile names the user invents, the picker now also lists every remaining profile on the printer under **Other K profiles on this printer**, so a profile that exists can always be selected; picking one works exactly as before, because Bambuddy already realigns the slot's filament context to whichever profile is chosen. The same generic-ID rule now applies to the spool form's K profile suggestions, guarded so it can never cross materials — a PETG spool is never offered PLA calibrations — and so that a spool naming its own brand keeps its brand-specific suggestions. Translated in all locales. Covered by tests for the reporter's nine-profile printer, the reset slot, printers that send no filament ID, the other-profiles group and applying a profile from it, and by guards that a brand preset still does not sweep in generic profiles.
- **The print-complete photo showed the toolhead still printing, three minutes before the print ended (#2547, reporter @anthonyma94)** — The Discord photo caught the model mid-print with the head over it, instead of the finished print. **Root cause.** Bambuddy fired the photo the moment `layer_num` reached `total_layer_num`. That edge is the moment the printer *starts* its final layer, not the moment it finishes it: on the reporter's H2C it arrived at 92% with two minutes of print still to run, and the last layer took three minutes and seventeen seconds including a filament change. Worse, that trigger latched, which locked out both of the triggers that fire at a genuine end of print — so on printers that never report an end-of-print filament unload (H2C and A1 Mini confirmed) there was no way back to a correct photo. **Fix.** The last-layer trigger is gone. The photo is taken when the print reports itself finished, which is a signal every model sends and which lands after the toolhead has parked. Since the printer's own end G-code drops the plate about 100 mm just before that, Bambuddy now raises it back to just above the last printed layer, takes the photo, then lowers it again — restoring the framing asked for in #1145, #1397 and #1565. The plate move is an absolute Z to a height the toolhead occupied seconds earlier, so it stays inside the travel limits and keeps the nozzle above the part, and it is skipped outright unless Bambuddy can confirm the height belongs to this print: the sliced file is matched by print name, and its layer count is cross-checked against the layer count the printer reported. It is also skipped when another job is queued, when the printer has moved on, and when the new **Restore plate for finish photo** setting is off. Prints whose End G-code Bambuddy injected — SwapMod plate swaps and similar — are detected automatically and keep using a frame from during the print, since their model has left the bed by then (#1867); that frame now also refreshes through the final layer instead of freezing when it began. Prints that record a timelapse normally source the photo from the video's last frame and need no move at all, but when the video has not transferred in time — the usual outcome on P1-series — the live photo that ships in the notification now gets the same plate restore, so it is no longer a shot of an empty-looking lowered bed. The `stg_cur=22` trigger is left in place for any firmware that does emit it, but the bundle survey above still applies — in practice every model reaches the finish-state path. Translated in all locales; wiki updated. Covered by backend tests for the removed trigger, the two surviving ones, the plate move and every condition that suppresses it, and by frontend tests for the new setting.
- **A model sliced for PETG printed as PLA, and the print dialog then refused to match PETG (#2712, reporter @kpp39)** — Slicing a MakerWorld model with a PETG profile produced G-code the printer wanted PLA for, and the Filament match step offered no way to correct it. **Root cause.** The list of filaments the slice dialog shows is positional: the first row is the printer's first slot, the second row its second, and so on down to the slicer itself. For a model that already carries slicing information, Bambuddy listed only the slots that print — which is the right answer when you are starting a print and Bambuddy has to match spools in the AMS, and the wrong one here. The reported model declares four filaments and paints with the fourth alone, so the dialog showed a single row; the PETG chosen in it became the *first* slot, and the fourth — the one the model actually prints with — kept the profile baked into the downloaded file. The result was a genuine PLA print, so the Filament match step was right to insist on PLA. **Fix.** When picking profiles for a slice, the dialog now lists every slot the project declares, with the ones this plate doesn't print with shown greyed out as before, so each row lines up with the slot it stands for and a choice made in the fourth row reaches the fourth slot. Starting a print is untouched and still asks only for the spools the job needs. Covered by tests for a source whose only printed slot is the fourth, for the print path keeping the shorter list, and for the chosen profile arriving in the right position.
- **A finished slice produced a stream of a dozen "Sliced ..." notifications** — One slice reported itself complete over and over, a notification every second and a half for as long as twenty seconds. **Root cause.** While a slice runs, Bambuddy asks the server how it is getting on every 1.5 seconds — but it never waited for an answer before asking again. Slicing a large project keeps the server busy for seconds at a time, so those questions piled up unanswered, each one still believing the job was running. When the server caught up it answered all of them at once, and every single answer was treated as the moment the slice finished: one notification each, one list refresh each. The bigger the project, the longer the pile and the more notifications. **Fix.** Bambuddy now waits for an answer before asking the next question, so nothing can pile up and a busy server isn't asked to do more work while it is already behind. A job's completion is also recorded once and only once, and a check that was already in flight when the tracker restarts now stops instead of finishing its work — either of which is enough on its own to keep a duplicate off the screen. Covered by tests for a server stalled across many intervals, for two slices finishing where one restarts the tracker, and for the same job being tracked twice in a row still reporting both times.
- **A database hiccup during dispatch could leave a queue item stuck and the next print of that file filed under the wrong archive** — When PostgreSQL briefly refused a connection in the middle of dispatching a queue item, the dispatch failed part-way through and left two things behind. **Root cause.** Bambuddy tells itself to expect a print just *before* it sends the print command, because the printer can report the job before the send even returns — but nothing undid that expectation when the command was never sent. The entry does expire after two hours, which is far longer than it takes to react to a failed job by pressing print again: that reprint was folded into the old archive and inherited its filament mapping and plate instead of getting a fresh one. Separately, releasing the row's dispatch lock is best-effort and needed the same database that had just refused, so it gave up after one attempt and the item stayed invisible to the scheduler until a restart. Nothing was ever sent to the printer — the failure happens before the print command — so this cost a stuck item, not a wrong print. **Fix.** An expectation is now withdrawn whenever the print command doesn't go out, which also covers two cases that were silently leaking before: a job cancelled during dispatch, and a print command the printer rejects. The dispatch lock is retried rather than abandoned after one try, and any lock left behind is released on the next quiet moment instead of surviving until a restart. Covered by tests for the withdrawal being an exact inverse of the registration, for a confirmed print keeping its expectation, for two dispatches not disturbing each other, and for the lock recovering from both a brief and a sustained database outage.
- **An unusable layer number from a printer could drop its connection (#2702 follow-up)** — Reading the current layer from a status message assumed it would always be a number. Anything else raised an error out of the routine that reads those messages, and nothing above that point catches it, so the connection's listener stopped and the printer looked silent until the staleness check rebuilt it — losing not just the layer number but the print-start and print-finished detection carried in the same message. An unusable value is now ignored, holding the last known layer rather than substituting zero, which the firmware uses to signal a cancellation. This is the same containment applied to the layer *total* in this release, three lines away in the same routine. Covered by tests.
- **The layer count stayed empty for a whole print, and First Layer Complete notifications read `1/0` (#2702, reporter @sn8key)** — On a P1S, a job started from Archives or through the Virtual Printer showed no layer information in the Print Status panel, and the Discord **First Layer Complete** notification went out as `1/0` instead of `1/33`. The count usually appeared some minutes into the print, which made it look intermittent, and the reporter noticed it filling in at the exact moment they submitted a bug report. **Root cause.** Bambuddy applies the printer's reported layer total as soon as it arrives, and separately clears that total when it detects a new print starting, so a leftover count from the previous job cannot become the denominator for this job's filament split. Both happen while processing the same status message, in that order — and the message announcing a new print is frequently the same one carrying the new print's layer total, so the value was stored and then immediately discarded. That is not merely late but unrecoverable: Bambu firmware sends only fields whose value has changed, so having published the total once, the printer never mentions it again. It could only come back in a full status refresh, which Bambuddy requests when it connects and when you press Force Refresh, but not during a print. Submitting a bug report happens to trigger one, which is why that appeared to fix it; and an install whose connection drops from time to time recovered by itself within minutes, which is why the fault looked random and why a *stable* connection made it worse rather than better. Everything that shows a layer count reads this single value, so the finish-photo trigger that fires on the last layer and the mid-print filament split were affected the same way. **Fix.** The new-print reset now keeps the total that arrived alongside the starting message, while still discarding anything left over from the previous job. If the starting message carried no total, Bambuddy asks for a full refresh once, and once more if layers are being laid down and there is still no total — by which point the printer certainly knows it. That is at most two extra messages per print, and never a per-layer retry. One incidental fix: an unusable layer total — `null`, or anything that isn't a number — previously raised an error out of the routine that reads status messages. Nothing above that point catches it, so the whole message was thrown away and the connection's listener stopped, leaving the printer to look silent until the staleness check rebuilt the connection. Such a value is now ignored, and the refresh described above then fetches the real total. Covered by tests for the same-message case, the case where the total arrives a message earlier, the previous job's total still being discarded, the one-shot bound, the refresh answer not re-triggering the reset, and the malformed values.
- **Support bundles could contain a printer-status file that no tool could open (#2702)** — Every support bundle includes a redacted copy of the printer's last status message, so that a given model and firmware's actual field layout is available when diagnosing a report. For printers whose AMS flow-calibration factor had a particular number of decimal places, that file was not valid JSON. **Root cause.** Redaction ran over the finished text of the file, and one of its patterns recognises Bambu serial numbers by shape — a shape the digits of a decimal number can also take. A calibration value of `0.0199999995529652` came out as `0.[SERIAL]`, which is not a number, so the file failed to parse from that point on. **Fix.** Redaction now walks the structure and rewrites text values only, leaving numbers, true/false and empty values exactly as the printer reported them, so the file always parses. Nothing is redacted less thoroughly than before. Covered by tests using the value from the bundle that exposed this, and for the walk leaving keys, booleans and nested containers alone.
- **External-camera timelapses and finish photos came out empty when the live view was open (#2707, reporter @bitbarista)** — On a printer with an external camera, watching the live view while a print ran meant the layer timelapse recorded almost nothing and the finish-photo notification went out with no image attached. The reporter measured zero of 87 layer captures on one print and zero of 105 on another, both watched from start to finish. A USB camera allows exactly one program to hold it open, so every capture taken during a live view failed outright rather than merely degrading. **Root cause.** Bambuddy already knew not to do this for the printer's built-in camera: a snapshot taken while somebody is watching reuses the viewer's frame instead of opening a second connection (#1348, #1271). That rule was never extended to the external-camera paths — and could not have been, because the buffered frame it depends on was only ever published by the built-in paths. The live external stream tracked when frames arrived but never kept one, and the stream hands out frames already wrapped for the browser, so there was nothing for a consumer to reuse. **Fix.** The external stream now publishes each frame as it goes past, and every one-shot consumer — layer timelapse, the finish photo and its fallback, the notification snapshot, Obico polling and the plate check — reuses that frame instead of opening a second handle. If a viewer is attached but no frame has arrived yet, that single attempt is skipped rather than competing, because kicking the viewer off is worse than missing one frame. Two things improve as a side effect: `/camera/snapshot` and the finish-photo fallback chain can now serve an external camera's live frame, where before they found an empty buffer, and the buffer is released when the last viewer of that printer leaves. Covered by tests for the frame plumbing, a buffering failure being unable to break the live stream, and each consumer in all three states — viewer with a frame, viewer without one, and nobody watching.
- **A long-running camera stream could eventually stall itself, with nothing in the log to explain it (#2707)** — ffmpeg's error output was only read when something had already gone wrong, which meant that for the entire life of a working stream nobody read it. ffmpeg writes a startup banner, its analysis of the incoming video, and then a progress line at a steady rate, and the operating system only buffers a fixed amount of that before it stops the writer. Once that happened ffmpeg would block trying to write the next line, stop producing frames, and the stream's own timeout would fire — reported as `RTSP read timeout` and a reconnect, with no indication that Bambuddy had starved it. How long it takes to reach that point is unmeasured and clearly long: one stream ran 21 minutes 36 seconds without trouble, so this is a limit that was being ignored rather than a fault anyone has reported. **Fix.** A streaming ffmpeg's error output is now read continuously and the most recent portion kept, so the limit cannot be reached. The kept portion is what gets logged when a stream does fail, which is more useful than before: it holds what ffmpeg said as things went wrong, where reading the buffer on demand returned whatever it had printed first — usually the startup banner, which is then discarded as noise. Credentials are masked on this path through the same single funnel as every other camera log. Covered by tests for continuous draining, the size bound, keeping the newest output, credential masking, and the ownership handover with the shutdown path — reading the same output from two places at once is an error, so only one owner reads it at a time.
- **Reopening the camera quickly could leave the new stream invisible to Bambuddy (#2707)** — Closing a camera view and opening it again straight away could leave the newly started stream unregistered, even though it was running and showing frames. The consequences were all indirect, which is what made it hard to spot: Bambuddy believed no viewer was attached, so Obico polling and snapshots would open a second camera connection and fight the live view — precisely what the guards added in #1348 and #1271 exist to prevent; the background cleanup task saw a camera process with no stream attached to it and killed the live stream as an orphan, usually within a minute; and pressing Stop reported that it had stopped nothing while the view was still running. **Root cause.** Each printer's fan-out stream was registered under a key derived from the printer alone, so every successive stream for that printer reused the same key, and the departing stream's cleanup removed whatever was registered under it — including its own replacement. The same cleanup also cleared the printer's most recent camera frame unconditionally, discarding the new stream's frame. It needed the old and new streams to overlap, which the four-second teardown fixed above made easy to hit. **Fix.** Each stream now gets its own registry key, so one stream can only ever clean up after itself — the same approach the external-camera path already uses (#2675) — and the shared per-printer frame is only released when no stream for that printer is left running. Covered by tests for both halves, including one that drives the real cleanup path with a second stream already registered.
- **Closing the camera held the printer's camera connection for four more seconds, then logged an error that wasn't true (#2707)** — Every time a camera view closed, the log recorded `ffmpeg didn't terminate gracefully, killing` and then `ffmpeg did not exit within 2.0s of SIGKILL; abandoning wait`. Both waits expired every single time, so each close cost a fixed four seconds — and because Bambu firmware allows exactly one camera connection, that was four seconds in which nothing else could use the camera: reopening the view, a snapshot, Obico, or the diagnostic. **Root cause.** ffmpeg is started with its output and error streams as pipes, and the shutdown path had stopped reading them. A process whose output pipe is full blocks mid-write, and ffmpeg's shutdown signal only sets a flag that its main loop checks on the next pass, so the polite request could never be acted on and the grace period was dead time. The forced kill did work — but Python cannot report an exit while a pipe is still unread, so the second wait expired too and Bambuddy concluded the process was stuck when it had already gone. Measured at 4.00s per close before, ~0.15s after. **Fix.** Both pipes are now drained while the process is being stopped, which makes the polite shutdown effective and the exit observable. The forced-kill path and its time limit remain as backstops, so a genuinely wedged process still can't hang a stream, a Stop request, or the cleanup task. This also corrects the conclusion recorded for #2580: that 12-hour hang was the unbounded form of this same self-inflicted stall rather than a stuck ffmpeg, so bounding the wait had capped the symptom without removing the cause. Covered by tests that drive a real subprocess — the fault lives in Python's pipe bookkeeping, so a stand-in object would pass against the broken code — including one that verifies a process ignoring the polite signal still has its forced exit observed rather than abandoned.
- **A crash or restart mid-print left layer-timelapse files behind forever (#2709, reporter @bitbarista)** — `timelapse_frames/` grew slowly and never shrank on its own. After several routine restarts during testing, it had accumulated 38MB: three abandoned frame directories and two 48-byte `.mp4` files from stitches that never finished writing. **Root cause.** Which timelapse session is active lives only in memory. A restart for any reason — a redeploy, a crash, a power loss — loses that bookkeeping instantly, but the frames already written for that session, and any partially-stitched output file, stay on disk with nothing left that knows they exist. `on_print_complete`'s cleanup never runs for them, because nothing calls it: the session it would clean up no longer has an entry to be found by. A restart-recovered print doesn't get a replacement session either (`_maybe_start_layer_timelapse` only fires on a fresh `PRINT_START` event, #1353), so an orphaned directory can never be resumed or claimed by anything — it just sits there. **Fix.** A one-time sweep on startup removes any `timelapse_frames/<printer_id>/` entry that doesn't match a session that printer is currently recording or stitching, and that is old enough not to be a startup race (five minutes). Only this feature's own artifacts are swept — a frames directory or a `timelapse_<id>.mp4` — so anything else that ends up under that folder is left alone rather than deleted for being old. Verified against the real 38MB of leftovers: startup logged each of the five removed by name, and the directory dropped to 8KB. Covered by tests for the orphaned-directory and stray-output-file cases, sparing a genuinely active session, sparing one that is mid-stitch (the window where the session has already been handed to ffmpeg and is no longer listed as active), sparing anything too recent to be sure about, leaving unrelated files alone, not counting a removal that failed as a success, and two defensive cases (no `timelapse_frames/` directory yet, an unrelated non-numeric entry under it).
- **Two snapshots taken at the same moment opened two competing camera connections (#2705, reporter @gzimbric)** — Bambu firmware allows exactly one camera connection at a time. Bambuddy already knew this: a snapshot taken while somebody is watching the live view reuses the viewer's frame instead of opening a second socket. What nothing covered was two *snapshots* overlapping with no viewer attached at all — an Obico poll and a printer-wall refresh landing 200 ms apart, each correctly concluding it wasn't competing with a viewer, and then colliding with each other. On the reporter's P2S this knocked over the live stream that was feeding the camera wall, which was then reaped for having received no frames for 58 seconds. Eight paths take one-shot frames independently — Obico polling, `/camera/snapshot`, the finish-photo capture and its disk-writing sibling, plate detection, the camera connection test, and the diagnostic — so any pair of them could overlap, and a shorter Obico interval widened the window. **Fix.** Simultaneous captures for the same printer now share one connection: the first opens it, everyone arriving while it is in flight gets the same frame. Every consumer here wants "a recent frame" rather than a frame stamped at its own microsecond, so identical bytes are the right answer. This shares captures, it does not cache them — a request arriving after the previous capture finished still takes a fresh frame, because plate detection and the finish photo judge a running print from these images and a stale frame there is worse than a slow one. Each caller keeps its own deadline (they range from 10 to 30 seconds) rather than inheriting whichever one happened to open the connection, giving up alone leaves the capture running for whoever else is waiting on it, and a capture that fails doesn't hand its failure to callers that never got an attempt of their own — they retry, which by then competes with nothing. One visible consequence: when the **Diagnose** tool shares a capture this way its frame-capture stage is labelled `coalesced_capture`, because the pass is real but the timing shown is mostly time spent waiting, and a diagnostic must not report on a connection it never opened. Wiki updated. Covered by tests for the reported collision, the five-callers-one-connection case the reporter verified on live hardware, per-printer isolation, staying coalescing rather than becoming a cache, registry cleanup, a failed capture not poisoning its followers, bounded retry, a follower abandoning its wait without sabotaging the capture, and cancellation from either side.
- **The same one-shot-capture collision could happen on external cameras too, with no viewer attached (#2707 follow-up, reporter @bitbarista)** — #2705 fixed simultaneous captures colliding on the built-in camera path, keyed by printer IP through `capture_camera_frame_bytes()`. External cameras reach the same kind of collision through a different function — `external_camera.capture_frame()` — that #2705 didn't touch, and a V4L2 USB device allows exactly one open handle just like Bambu's own RTSP limit. Nothing coalesced two one-shot capturers here either: Obico polling, the in-print frame bank, the finish-photo moment, plate detection and the notification snapshot could each open their own connection to the same USB camera and collide, with `is_stream_active()` unable to help since that guard only stops a capturer from competing with an *attached viewer*, not with another capturer. **Fix.** The same shape of fix as #2705, applied to `capture_frame()`: concurrent callers for the same camera (URL, type, and — since #1177's snapshot override routes to a different endpoint entirely — snapshot URL) share one capture rather than opening a second connection. Coalesces, does not cache, so a call after the previous one finishes always captures fresh. Each caller keeps its own timeout, giving up leaves the capture running for whoever else is waiting, and a capture that fails doesn't hand its failure to a caller that never got a turn of its own. One visible consequence, mirroring the label #2705 added to the built-in **Diagnose** tool: pressing **Test** on an external camera while a capture is already running now says the frame was shared with it, because the result is real but the test did not open a connection of its own — and forcing one would be the very second handle this change exists to prevent. Covered by tests mirroring #2705's: the reported-shape collision, five callers sharing one connection, per-camera and per-snapshot-URL isolation, staying coalescing rather than becoming a cache, registry cleanup, a failed capture not poisoning its followers, bounded retry, a follower abandoning its wait without sabotaging the capture, and cancellation from either side — plus, for this path specifically, that an unexpected error is reported as a failed capture rather than raised at every waiting caller at once, and that the shared-capture log lines redact credentials, since an RTSP camera URL routinely carries `user:pass@` where the built-in path's key is only an IP address.
- **Auto-matched filament showed a green tick when the colour was plainly wrong (#2687, reporter @pchulpjoost)** — The Filament Mapping panel reported a slot as matched, with the header reading **(Ready)**, while the swatch beside it showed the slice wanted dark red and the tray it had picked held Dark Green. Manually selecting that very same tray from the dropdown correctly reported the colour mismatch, which is what made the disagreement so visible. **Root cause.** Auto-match ranks candidate trays by filament preset ID (`tray_info_idx`) first, and when exactly one loaded tray carried the preset the slice asked for, that tray was accepted as a *definitive* match on the assumption "same preset means same spool, so the colour must agree too". The preset ID names the **variant**, not the spool — `GFA00` is PLA Basic, `GFA01` PLA Matte, `GFA17` PLA Translucent, in every colour Bambu sells it. So a user with one Matte spool loaded matched every Matte requirement regardless of colour, and the colour comparison was never reached. This is why the report came in for PLA Matte in particular: generic PLA Basic is usually loaded several times over, which sent the match down a different path that did compare colours correctly. **Fix.** The colour verdict is now taken from the tray that was actually selected, never from which rule selected it, and the automatic and manual paths share one comparison so they cannot drift apart again. The preset still decides *selection*, because the Basic/Matte/Silk distinction matters ([#2650](https://github.com/maziggy/bambuddy/issues/2650)) — a wrong-coloured tray of the right variant is still chosen, but it is now reported as an amber **Color mismatch** instead of a green tick, and you can print anyway or pick another slot. A near-enough shade still counts as a match, and a 3MF that specifies no colour for a slot is satisfied by any colour rather than being flagged. Dispatch behaviour is unchanged: **Force color match** already required an exact colour before sending a job, so nothing was ever printed in the wrong colour because of this — the panel was simply telling you it was fine when it wasn't. Frontend-only. Wiki updated. Covered by tests for the unique-preset wrong-colour case, agreement between the auto and manual verdicts, the near-shade and colourless-requirement cases, and the multi-preset path that already worked.
- **P1-series archives kept the worse finish photo when the timelapse arrived late (#2704 follow-up)** — When a print records a timelapse, Bambuddy prefers the video's last frame as the finish photo: the firmware stops recording after the toolhead parks but before the end G-code drops the bed, so it frames the finished print properly, where a live camera grab at that moment catches an already-lowered plate. Bambuddy waited 60 seconds for the video and then gave up, because the print-complete notification is waiting on that photo and holding a notification for minutes is worse than sending it with the live grab. On P1-series printers the video usually arrives later than that — they write MJPEG AVI instead of H.264 MP4 and serve it slowly, so across the support bundles their median was 33 seconds but the 90th percentile was 167 and the slowest observed was 546; every other model finished inside 26 seconds. The result was that the printers most in need of the better photo were the ones that never got it. **Fix.** The notification still goes out on the same 60-second bound with the live grab, so nothing gets slower. If the video was still on its way when that bound expired, Bambuddy now keeps waiting in the background and adds the extracted frame to the archive when it lands, at the front of the photo list so opening the gallery shows it first. The live grab is kept rather than replaced — the notification that already went out links to that exact file, and removing it would leave a broken image in Discord or Telegram. Covered by tests for the ordering, the longer budget, idempotency and the cases where the video never arrives.
- **Timelapses that never got attached, and a Scan button that could not find them (#2704)** — Timelapse was on for the print, the video never arrived in the archive, and pressing **Scan for Timelapse** afterwards turned up nothing. Measured across 247 support bundles, this was not rare: of 457 automatic scans only 262 ever attached a video. **Root cause, part one.** The scan looked four times, at 5, 10, 20 and 30 seconds, then stopped. The printer writes the video only after the print ends and a long print makes a large file, so it often arrived after the last look — the attempt that found the video was the first one 272 times and then 17 / 13 / 13, a flat tail against the cutoff rather than a decaying one. What ran after those four attempts was a fallback that searched for the print's name inside the video filename; Bambu firmware only ever writes `video_<timestamp>`, so in 247 bundles it fired 159 times and matched exactly zero. **Root cause, part two.** The manual Scan button had no such snapshot to work from and matched by filename timestamp, by FTP modification time, or by there being exactly one video on the printer — all of which read a clock the printer cannot set, because a printer in LAN Only mode never reaches Bambu's time server. The reporter's P1S was six and a half days out, which defeats every one of those. **Fix.** The automatic scan now polls for several minutes instead of giving up after about a minute, and the name-match fallback is gone. The list of videos present when the print started is saved with the archive, so the comparison survives a Bambuddy restart mid-print and the manual Scan button can use it too — same clock-independent comparison, no timestamps anywhere. When a previous print's video lands late and two files look new, the one already attached to another archive is ruled out by name rather than by picking whichever the printer listed first, which could attach the wrong video. **Bambuddy now deletes a timelapse from the printer once it has been archived**, which keeps the printer's folder down to unclaimed videos and stops P1-series cards filling up with AVIs; your copy is in the archive, where you can watch, edit, download or remove it. That delete only happens after the transfer has been checked against the size the printer reported — which also fixes a silent truncation: an FTPS transfer that ended early produced a partial video that was attached as though it were complete. Because the first look happens seconds after the print ends — while the printer may still be writing the video — the file is also re-checked afterwards and only accepted once it has stopped growing, so a partial video is never mistaken for a finished one and the printer's copy is never removed on the strength of one. Wiki updated. Covered by tests for candidate selection, the download check gating the delete, the poll bounds, baseline persistence and the manual scan.
- **A printer that refuses Bambuddy's access code now says so, instead of reconnecting silently forever (#2698, reporter @djepsylon)** — A printer whose access code or serial was wrong produced no explanation anywhere: the connection attempt was refused, and the only trace was a warning every 30 seconds reading `MQTT disconnected: rc=Unspecified error` — the same line you get from a printer that is simply switched off. The failure branch of the MQTT connect callback set "not connected" and discarded the reason code the printer had just sent, so the one piece of evidence that would have named the cause never reached the log, the support bundle, or the UI. In the report behind this fix, one of three printers had been in that loop for the entire capture and nothing said why. **Fix.** A refused connection is now logged with the printer's own reason ("Not authorized", "Bad user name or password") and, for those two, the remedy — the access code is regenerated every time LAN Only or Developer Mode is toggled, so it has to be re-read from the printer's screen. The reason is kept on the connection, so the **Connection Diagnostic**'s *Printer credentials* check now states plainly that the printer refused the credentials when that is what happened, and falls back to hedged wording when all Bambuddy knows is that there is no session — previously it asserted "the access code is most likely wrong" even for a printer that was merely rebooting or already at its connection limit. The same reason is returned by the pre-add connection test. The access code itself is never written to the log. Translated in all locales; wiki updated. Covered by tests for both refusal codes, the clearing of the reason on a successful reconnect, the diagnostic's reason plumbing, and the two UI variants.
- **Camera credentials could reach the log and the support bundle, and a camera test could pass without opening a connection (#2721, contributor @bitbarista)** — Review follow-ups on the external-camera capture coalescing. That logic was transplanted from the built-in camera path, which keys on a printer IP and so has nothing to hide in a log line; these keys are camera URLs, and an RTSP URL routinely embeds `user:pass@`. Five new log lines printed the password, one of them at warning level, where it reaches support bundles. All five now redact **before** truncating — slicing first can cut the URL short of the `@` the pattern anchors on and leave the password intact, which is why every other URL log in the module already does it in that order. **Also fixed:** an unexpected error inside one capture reached every caller waiting on the shared result at once, so one caller's failure became N and none of them retried; the shared wrapper now contains it and reports a failed capture. And **Test connection** returned success for a frame it had been handed from someone else's in-flight capture — the one answer a connection test must not give silently. It still shares rather than forcing its own capture, because forcing one would open the second handle to a single-reader device that this whole mechanism exists to prevent; it now says the frame was shared with a capture already running.
- **The orphaned-timelapse sweep could delete a timelapse while it was still being stitched (#2722, contributor @bitbarista)** — The sweep's own docstring claimed its age margin made it safe to run mid-stitch. It was not. A session is dropped from the active list before its frames are handed to ffmpeg, so for the length of a stitch the directory matches no active session, and its mtime is the last layer's frame write — on a tall print's final layer, easily older than the margin. The default margin and the stitch timeout were both 300 seconds, so the two were tied with no headroom at all, and a sweep landing in that window deleted ffmpeg's input from under it. An in-progress stitch is now marked explicitly, and the marker is cleared in a `finally` so a failed stitch cannot leak it and leave that printer's files permanently un-sweepable. **Also fixed:** the sweep deleted any file under its working directory past the margin rather than only the `timelapse_<session_id>.mp4` shape this feature creates — nothing else writes there today, but age alone is not a reason to delete a file this feature did not create. And a removal that failed on a read-only mount or a permissions problem was counted and logged as a success, which matters because that log is the only evidence an operator has of what was deleted.
- **Finish photos came out upside-down, or rotated twice, when a camera rotation was set (#2723, contributor @bitbarista)** — `camera_rotation` was only ever wired into the print-start photo and the in-print frame bank; the finish-photo pipeline saved its frames straight to disk unrotated. Fixing that surfaced a second fault: rotating the frame where it was consumed rotated one of its two sources twice, because the in-print bank's frames arrive already rotated while live grabs are raw, and the consumer cannot tell them apart. On firmware that never emits `stg_cur=22` — the path that bank exists to serve — a 180 degree rotation cancelled itself out and the photo was upside-down again, with 90 and 270 landing 180 out. Rotation now happens where each frame is captured, so every cached frame carries exactly one whatever produced it. **Also fixed:** two finish-photo sources were still writing unrotated files — the built-in camera's own capture, and the still extracted from a printer-recorded timelapse, which is the *preferred* source for a built-in camera print, so whether a photo came out the right way up depended on which source happened to win. Layer-timelapse frames are rotated too. Note that the archived video is the printer's own file and is not re-encoded, so it still plays at the camera's native orientation. A failed rotate leaves the unrotated file rather than losing a delivered photo.
- **Ukrainian was listed above Russian in the language picker** — Locales appear in the picker in the order they were added, but `uk` had been inserted ahead of `ru` in the import block, the resources map and the list the picker renders. Moved to the end of all three; the alphabetically sorted supported-language list already had it in the right place. Frontend-only, with no behaviour change beyond the row order.
- **Setting Spoolman options over the API with a true/false value returned a server error** — `PUT /settings/spoolman` accepts a free-form body, and sending the natural JSON form for a switch — `{"spoolman_enabled": true}` rather than `{"spoolman_enabled": "true"}` — came back as a 500 with nothing useful in it. The shipped UI always sends strings, so this only affected people driving Bambuddy from a script or a Home Assistant `rest_command`, which is exactly where a real boolean is the obvious thing to send. **Root cause.** Settings are stored as text and every reader compares them as text, but the submitted value went in untouched. Deciding whether Spoolman had just been switched on called a string operation on it, which a boolean does not have; and the raw boolean was also written straight to a text column, which SQLite quietly turns into 1/0 while PostgreSQL refuses it outright — so the stored result depended on which database the install used. **Fix.** Boolean-ish settings are now converted to a canonical `true`/`false` on the way in, accepting real booleans, `1`/`0`, and the usual spellings (`True`, `yes`, `on`) case-insensitively, since this is a documented API that scripts talk to. A value with no sensible reading, such as `"banana"`, now returns a 400 naming the field instead of being stored as-is and silently treated as off. Two details are preserved deliberately: a blank value still means "use the default" for the two options that default to on, and reading a stored value stays as strict as it has always been elsewhere in the codebase, so no existing row changes meaning. Text options are checked too, so a JSON object can no longer be stored as its own printed form. One incidental improvement: a value stored as `True` by an earlier API call showed as off in the UI, which compares case-sensitively, while the backend treated it as on — canonical storage removes that disagreement. Covered by tests across the accepted spellings, the rejected values, the blank-means-default behaviour, and the read path.

## [1.2.5.1] - 2026-07-27

### Added
- **Configure an OIDC provider from environment variables (#2593, contributor @munin92)** — Single Sign-On could only be set up by clicking through Settings → Authentication, which does not exist as a step in a deployment driven by a compose file, a Helm chart or a GitOps repository: every fresh install of the same stack needed someone to log in and re-enter the same issuer, client ID and secret by hand. One provider can now be defined entirely from `BAMBUDDY_OIDC_*` variables. It is written on startup and re-applied on every boot, so the file in your repository is the source of truth, and providers created in the UI keep working alongside it, untouched. Only the four required variables — name, issuer URL, client ID and client secret — activate it, and all four or none: a half-configured provider is refused at boot with a log line naming what was wrong, rather than appearing on the login page and failing when somebody clicks it. Values are validated by exactly the same rules the settings UI enforces, including the one that refuses account auto-linking on an unverified email address, so the environment cannot reach a configuration the UI would have rejected. A typo never stops the app from booting and never takes a working provider down: the previous configuration keeps running and the reason is logged. In the UI the provider is shown with a lock badge and no edit, delete or enable controls, because startup would overwrite any change at the next restart. Removing the variables disables the provider instead of deleting it — deleting would permanently unlink every account bound to it — and re-adding them brings it back with those links intact. `BAMBUDDY_LOCAL_LOGIN=true` remains the way back in if a misconfigured provider ever locks you out. All thirteen variables are documented in `.env.example`; wiki updated. Covered by backend and frontend tests.
- **Per-file print progress inside a project (#1897, reporter @FedericoPuntelli)** — Projects that consist of many distinct files each needing N prints (e.g. 13 plates × 10 sets = 130 prints) only had aggregate progress; finding out "how many times have I printed plate_7?" meant reading the Activity Timeline line by line. Projects now take an optional **Copies per File** target: each printable file in the project's linked folders shows an **X / N** badge with a mini progress bar (gray not started, amber in progress, green target reached), and the progress card gains a **Complete Sets** bar — the minimum per-file count, i.e. how many finished assemblies you can ship right now. Without the new target, files simply show a printed-count badge (3×). Counting matches the aggregate stats: only completed runs, attributed to a file by a new `library_file_id` stamp on queue-dispatched archives, with content-hash and filename fallbacks covering historical prints. Also fixed along the way: **files queued from a project-linked File Manager folder now attribute their prints to that project** — previously only prints started from the project page counted toward project statistics. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Users can now delete empty folders in the File Manager (#1781, reporter @cadtoolbox)** — Library folders have no ownership tracking, so folder deletion was gated entirely behind `library:delete_all` — a regular user with `library:delete_own` could create folders and delete their own files, but the emptied folder sat there until an admin removed it. Users with `library:delete_own` can now delete folders that are truly empty: no subfolders, no files — including trashed ones, since deleting a folder would silently drop another user's trash-restorable files. External folders (operator-configured mounts) and folders linked to a project or archive still require `library:delete_all`, even when empty. The folder tree's Delete entry enables accordingly, with a "You can only delete empty folders" tooltip on non-empty ones; the bulk-delete API applies the same rule. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **AI failure detection is now visible on the printer cards (#1546, reporter @Jeff-GebhartCA)** — Previously the live Obico classification (safe / warning / failure, smoothed score) was only visible under Settings → Failure Detection, so tracking how detection matched an ongoing print meant flipping between the Printers screen and Settings. Each printer card's badge row now shows an AI badge whenever detection is enabled for that printer, like the other health badges: gray **Idle** while no print is being watched, then green **Safe**, amber **Warning**, or red **Failure** while a print is actively monitored. The tooltip carries the current score, and clicking opens a modal (like the HMS error badge) with the live status, score, frames analyzed, and the detection service's last error — plus a shortcut to the full settings. Toggling detection on or off updates the cards immediately. Printers excluded from monitoring and setups without failure detection show nothing. Served by a new lightweight `/obico/printer-status` endpoint readable with printer permissions alone (the existing settings-gated endpoint is unchanged and keeps configuration private). Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Bark is now a notification provider (#1495)** — [Bark](https://github.com/Finb/Bark) is the open-source, account-free iOS push app (self-hostable via bark-server), popular especially with Chinese-speaking users. Configure it with just the device key from the app; the server URL defaults to the official `api.day.app` relay and accepts a self-hosted instance. Optional settings: notification **Group**, **Sound**, and iOS **Interruption Level** — Time Sensitive breaks through scheduled summaries, Critical bypasses Silent mode and Focus (useful for print-failure alerts), Passive delivers silently. Send failures wrapped in an HTTP 200 body by bark-server are detected and reported properly. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Home Assistant notifications can carry custom data fields (#1441)** — When a notification provider targets an HA notify service (e.g. `notify.mobile_app_myphone`), a new optional **Data (JSON)** field is forwarded as the service call's nested `data` object — the same place HA automations put mobile push options like `priority`, `ttl`, `channel`, and `group`. `ttl: 0` + `priority: high` make Android pushes arrive immediately instead of batched, and `channel` gives printer alerts their own notification channel/sound. The field is JSON (not key=value lines) so numbers stay numbers (`ttl: 0`) and nested options work. Validated on both ends: the UI rejects malformed JSON before saving, and the sender fails loudly with a clear message rather than posting a half-built payload. Only included when configured — the default persistent-notification path is unchanged, as its schema rejects unknown keys. Translated in all locales; wiki updated. Covered by backend and frontend tests.
- **Energy usage now feeds the statistics that previously only knew about filament (#1432)** — Bambuddy has measured per-print energy via an attached smart plug for a while (the plug's lifetime counter is captured at print start and the delta stored with the print), but two stats surfaces ignored it. First, the **Most Expensive** record on the Statistics page ranked prints by filament cost alone, so a cheap-filament print with hours of heated-chamber time could never win; it now ranks by filament + measured energy cost (prints without a smart plug simply compete on filament cost, as before). Second, **Filament Trends** gained an **Energy Over Time** chart — per-day kWh (per-hour for short ranges, per-week for long ones), with the range's total kWh and energy cost in the header. The chart only appears when the selected range actually contains measured energy data, so setups without smart plugs see no change. The `/archives/slim` stats feed now carries each run's `energy_kwh`/`energy_cost`. Translated in all locales. Covered by backend and frontend tests.

- **The plate-clear gate is now visible over MQTT, and can raise a notification (#2525, reporter @daschaefer)** — When a print reaches a terminal state, Bambuddy holds the queue until someone confirms the build plate is clear. That gate was visible only in the Web UI: the printer's own MQTT push reports nothing beyond `RUNNING`/`PAUSE`/`FAILED`/`FINISH`/`IDLE`, so an external automation could not tell "finished" from "finished and still waiting for a human". The per-printer status topic now carries an **`awaiting_plate_clear`** field, and every transition is additionally published on a new **retained** topic `bambuddy/printers/{serial}/plate_clear` (`{"awaiting": true|false, …}`). Retained and published from the flag itself rather than from printer telemetry, so a subscriber learns the current state of every printer the moment it connects — and the state stays correct after Auto Off powers a printer down, which stops telemetry entirely and would otherwise leave the status topic frozen at `false`. Publishing is edge-triggered: the queue re-asserts the flag on every dispatch, and no subscriber should see a "plate cleared" for a plate that was never dirty. A matching **Plate Clear Required** notification event was added, off by default on every provider because it fires after every print at the same moment as the print-complete alert. Acknowledging still goes through the existing `POST /printers/{id}/clear-plate`. Translated in all locales; wiki updated. Covered by backend tests.

- **Re-slicing a model designed for another printer can now keep the designer's print settings (#2622, reporter @kpp39)** — Published models often deviate from the stock Bambu profile on purpose: five walls, 100% infill, a 0.1mm first layer. Re-slicing one for a different printer discarded all of it, because the picked process preset overrides the file's embedded settings — that override is exactly what makes cross-printer re-slicing work, so it could not simply be dropped. "Slice as designed" (#2611) was no help here: it is all-or-nothing and only offered when your printer already matches the design's target. The slice dialog now shows a **Keep the designer's settings** panel listing precisely which print settings the author changed away from the stock profile, and what each was set to, with a checkbox per setting. **Design-intent settings** — wall count, infill density and pattern, layer and first-layer height, supports, seam position, brim, ironing — are ticked by default. **Printer-specific ones** — every speed and acceleration, jerk, fan speeds, temperatures, prime-tower geometry — are listed with a badge but start unticked, because a value tuned for the author's machine can be merely wrong on yours or outside the range your printer's profile accepts, which fails the slice outright. Nothing is guessed: Bambu Studio records the deviating-settings list inside the 3MF itself, so the panel shows the author's own change list. Only ticked settings are sent, only the process slot is carried (your filament picks are untouched), and the panel is hidden for files that change nothing. Translated in all locales; wiki updated. Covered by backend and frontend tests.

- **The size-S printer card now shows remaining time, ETA and layer progress (#2674, reporter @jakestatefarm1101-alt)** — Size S existed for exactly one job: watching a whole fleet on one screen. But it rendered only the printer name, a status pip and a progress bar — every other block on the card is gated behind the expanded view — so it could not answer the question that view is for, "which printer finishes first". Dropping to S to fit more printers meant losing the information you dropped down to compare. The compact card now carries one line of metrics under the progress bar while a print is running: **remaining time**, **ETA** in your configured 12/24-hour format, and **layer progress** — the same values the Medium card already shows, using the same formatters and the same ETA styling so the two read alike. Each value is omitted individually when the printer doesn't report it, and the row holds its height when nothing is printing so cards don't shift as prints start and finish. Card dimensions and grid density are otherwise unchanged. Frontend-only. Wiki updated. Covered by tests.

- **Failure detection can now authenticate to a token-protected Obico ML API (#2733)** — Obico's `ml_api` container takes an optional `ML_API_TOKEN` environment variable; with it set, the container answers 401 to any detection request that doesn't carry that token, which is how you stop everything else on your network from using your inference server. Bambuddy never sent one, so the only way to use it was to remove the token from the server — a step the reporter had already taken for their Home Assistant setup and did not want to undo. **Settings → Failure Detection** now has an **ML API Token** field; leave it empty and requests go out exactly as before. Also worth knowing: this failed in the most confusing way possible, because Obico protects its detection endpoint but leaves its health endpoint open. Bambuddy's **Test** button pinged the open one, so it reported success against a server that was rejecting every real call, and detection just silently never fired. Test now checks both and says outright when a token is rejected, and the status card reports a rejected token as a rejected token rather than a bare HTTP error. Translated in all locales; wiki documents the token, the health-endpoint trap and how to recover from it.

### Fixed
- **Support bundles reported Obico as monitoring no printers when it was monitoring all of them (#2733)** — The bundle read the list of monitored printers with a parser that split on commas and treated an empty value as "none". The setting is a JSON array, and empty means *all printers* — which is the default. So a working default Obico setup showed `obico_enabled: false` against every printer in its own support bundle, sending anyone reading it down the wrong path. The bundle now parses the setting the way the detection service does, and takes the global on/off switch into account.
- **Slicing a single-plate project failed on filament slots the plate never prints with (#2711, reporter @kpp39, also seen by @phi-schi)** — Sending a MakerWorld project to the slicer was rejected with "filament preset ... (slot 1) is not compatible with printer ...", naming a slot the model doesn't use, and the slice modal deliberately locks the dropdowns for unused slots so there was no way to correct it by hand. **Root cause.** A project can declare more filaments than any one plate paints with — the reported model declares four and uses one — and the slicer validates every filament it is handed, not just the ones the print touches. Bambuddy already rewrote those unused entries to match a slot the plate really uses, but only when the plate number was part of the request. The modal omits it for single-plate projects, since there is no plate to choose, so the rewrite never ran for them — which is every model imported from MakerWorld. The three idle slots therefore arrived carrying whatever the source file had baked in, in this case profiles for an entirely different printer, and the slicer refused the job on the first one. **Fix.** A missing plate number now means the first plate, which is what it means everywhere else in the slicing path, so single-plate projects get the same treatment multi-plate ones already had. **Also fixed:** "Slice all plates" reached the same code, where it isn't a plate number at all. On a project with a dedicated support filament that combination could rewrite every colour to the support material and silently slice a multi-colour model in one filament — it is now excluded, since across all plates no slot is unused. Covered by tests for a single-plate slice with no plate number in the request, for slice-all leaving every slot untouched, and for the support-filament case specifically.
- **Bambuddy can be configured to want more database connections than PostgreSQL will give it** — The connection pool's own ceiling is 100 per worker process by default, while a stock PostgreSQL allows 100 in total and reserves 3 of those for administrators. Nothing checked the two against each other, so the mismatch only appeared as a failure somewhere unrelated once the connections ran out — which is how the dispatch failure above happened. **Fix.** Bambuddy now compares the two at startup and, when the pool could ask for more than the server allows, logs a warning naming both numbers, how many connections are already open, and the settings to change. Both figures are also included in the support bundle, so it is possible to tell a misconfigured limit apart from connections being held too long. Nothing is adjusted automatically: the pool is sized before any connection exists to ask the server with, and the right ceiling depends on how many worker processes you run and what else shares the server. Unchanged on SQLite, which has no such limit, and a server that declines the question is ignored rather than delaying startup. Covered by tests for the warning content, the reserved-slot arithmetic, the values reported to the bundle, and startup surviving a refused probe.
- **Spools added as stock could not be edited or duplicated without assigning a slicer preset, and that preset then overwrote the spool's own manufacturer (#1905, reporter @rocstat1979)** — A spool created via **Quick Add**, a CSV import or an RFID scan has no slicer preset, brand or subtype. Reopening it in **Edit Spool** demanded all three before anything could be saved — so changing the storage location, the cost or the note was impossible — and **Copy Spool** had the same gate with no Quick Add toggle to waive it. Worse, the preset you were forced to pick auto-filled material, brand and subtype from the preset name, silently rewriting a hand-entered manufacturer ("Elegoo" → "Generic") so the spool no longer appeared where it had been filed. **Fix.** Editing and copying now require only what the backend requires — the material; the preset, brand and subtype fields stay fully visible and editable (nothing is hidden the way Quick Add hides it), and the required-field markers no longer advertise a rule that isn't enforced. Selecting a preset now fills only fields that are still empty or that a previously selected preset had filled, so values you (or the saved spool) provided survive; switching between presets still replaces what the earlier one contributed. **Also fixed:** the brand and material dropdowns no longer *filter* themselves down to the brand/material pairs known to the color catalog and slicer presets — a real combination like Elegoo ASA looked impossible to enter because Elegoo was catalogued only for PLA. Both lists now always offer everything known, with the catalog-paired entries ranked first under a **Suggested** heading and the rest under **All**, and a spool's own custom brand or material is always present in its dropdown. The same change applies to the SpoolBuddy write-tag form, which shares these fields. Lastly, the Quick Add layout no longer leaks out of create mode: quick-adding a spool and then opening Edit used to strand the edit form in the reduced layout with no toggle to leave it. Frontend-only. Translated in all locales; wiki updated. Covered by validation and form-interaction tests.
- **The spool PA-Profil (Pressure Advance) picker only ever offered the 0.4mm K-profile, hiding nozzle-specific profiles for the same filament on multi-nozzle printers (#2618)** — When a printer had two K-profiles for one filament differing only in nozzle size (e.g. PAHT-CF at 0.4mm K=0.042 and 0.6mm K=0.028), the **Edit Spool → PA-Profil** tab (and the SpoolBuddy write-tag page, which shares the picker) showed only the 0.4mm entry ("1 match, K=0.042"), regardless of the nozzle actually installed. **Root cause.** Both surfaces fetched a printer's calibrations with `getKProfiles(printer.id)`, which defaults the nozzle filter to `0.4` — and the printer/MQTT layer filters strictly by that diameter, so the 0.6mm profile was never retrieved. (The AMS-Slot config dialog was already fixed for this in #1899; these two pickers were not.) **Fix.** The picker now queries every nozzle the printer reports installed (`0.4`, `0.6`, …) and merges the results, falling back to `0.4` only when the printer hasn't reported its nozzle hardware. Each profile row now also shows a nozzle-diameter badge so two identically-named profiles are distinguishable. Frontend-only. Covered by tests for the nozzle enumeration and the two-profile rendering.
- **Print-archive backups to a Gitea or Forgejo instance hosted under a URL path prefix could not be configured — the repository URL failed to parse (#2642, reporter @M1ndHunteR)** — Self-hosted Gitea/Forgejo is often served under a subpath (`ROOT_URL` like `https://host/gitea`), so repositories live at `https://host/gitea/owner/repo` rather than at the host root. **Root cause.** The Gitea backend (shared by Forgejo) assumed the repo sat directly under the host: URL parsing required exactly two path segments after the hostname, so a subpath URL's three segments (`gitea/owner/repo`) matched nothing and raised "Cannot parse repository URL". Even had it parsed, the API base was derived from scheme+host only, yielding `https://host/api/v1` instead of `https://host/gitea/api/v1`, so every API call would have 404'd. **Fix.** The Gitea/Forgejo backend now treats the final two path segments as `owner`/`repo` and keeps any leading segments as a base-path prefix, deriving the API base as `{scheme}://{host}{prefix}/api/v1`. Root-hosted instances are unaffected (empty prefix). GitHub/GitLab are untouched. Covered by parse and API-base tests for both providers.
- **The Print Queue's History tab showed a count of all prints but only ever displayed the first 50, with no way to reach the rest (#2682, reporter @pchulpjoost)** — The History header read e.g. `History (311 items)`, but only 50 rows rendered and there was no "load more" control, so 261 finished prints were unreachable. **Root cause.** The full history is already loaded client-side (the queue endpoint has no limit) and sorted correctly — the header counts the whole list — but the row builder hard-sliced it to `items.slice(0, 50)`, a fixed cap with no accompanying control. Nothing was missing server-side; it simply wasn't drawn. **Fix.** History now paginates: it draws the 50 most-recent prints and, when there are more, shows a **Show more** button (with a `Showing X of Y` count) that loads the next 50, repeating until the whole history is on screen. The page size resets to the first page only when you re-sort or change the location filter — deliberately not on the periodic queue poll, so an expanded view doesn't collapse mid-scroll. Frontend-only; batch grouping and per-row actions are unchanged. Covered by a test asserting the 50-row cap, the `Showing 50 of 60` count, and that Show more reveals the remainder. Wiki updated.
- **LDAP Distinguished Names weren't redacted from the support bundle / bug report (#2681, reporter @MaxBareiss)** — With LDAP auth in use, the debug log carried lines like `LDAP authentication successful for user: … (DN: CN=Joe Schmoe,CN=Users,DC=ad,DC=example,DC=com, …)`. A DN's leaf `CN` is the user's real name — PII on par with the email address Bambuddy already redacts — and it passed straight through into an uploaded support bundle. **Fix.** The log sanitizer (used by both the support bundle and the in-app bug report) now redacts LDAP DNs to `[DN]` wherever they appear — the auth line, ldap3 exception strings, and group DNs alike — matching a run of `attr=value` RDN components (`CN/OU/DC/UID/…`) so ordinary `key=value` log text isn't affected. As primary hygiene the LDAP service also no longer logs the raw DN on successful auth (the username plus group count is enough). Covered by tests, including the exact reported line and non-DN `key=value` lines that must be left intact. Redaction list on the Bug Report wiki page updated.
- **An external USB camera could stay locked (LED stuck on) after closing the live view, blocking reopen (#2675, reporter @bitbarista)** — Closing an external USB (V4L2) camera's live view abruptly — tab/popup closed, or a dropped connection — could leave the backend's `ffmpeg` process running and holding `/dev/videoN` open. The camera LED stayed lit and the next attempt to open the view (or click Test) failed or took 10-30+ seconds while the new `ffmpeg` fought for exclusive device access. **Root cause.** This is the same class of leak as #776 (fixed for the built-in RTSP path), but the external/USB path was never wired into that fix. #776 added the `_active_streams` / `_disconnect_events` / spawned-PID registries so both the `/camera/stop` endpoint and the periodic orphan janitor could find and kill leaked ffmpeg — but external streams registered into none of them, so for USB cameras both were structurally blind: `/camera/stop` returned `{"stopped": 0}` even while a stream was genuinely running, and the janitor's `/proc` net matched only `rtsp(s)://bblp:` cmdlines, never a USB `ffmpeg`. Cleanup ran only via the stream generator's own `finally`, which an abrupt disconnect can skip. **Fix.** External USB (and external-RTSP) streams now register their `ffmpeg` process into the same registries the built-in path uses, so `/camera/stop` terminates them promptly (now `{"stopped": 1}`) and the janitor reaps any that leak within its cleanup interval. The `/proc` safety-net scan also now recognises USB (`-f v4l2`) `ffmpeg`, so orphans surviving an app restart are caught too; a leaked process that hangs on a still-locked device (rather than exiting) is registered before the startup probe so it can still be killed. Covered by tests: the stream hands its process to the registry, the stop endpoint and janitor both reap a registered external stream, and the `/proc` scan matches `v4l2` while ignoring unrelated `ffmpeg`. Thanks to @bitbarista for the precise diagnosis. (Reported alongside a working fix; implemented here.)
- **A broken slicer sidecar silently produced tiny corrupt files that were queued and printed anyway, and a reverse-proxy 413 wasn't self-explanatory (#2671, reporter @Austinzveare)** — With the slicer-API sidecar behind a reverse proxy, slicing produced ~28-byte files that "did nothing" (and could still be sent to the printer), while a separate proxy attempt failed with a bare **413 Request Entity Too Large** that the recommended nginx fix didn't seem to resolve. **Root cause.** Bambuddy's slice client only validated the sidecar's HTTP *status*, not its body. When the sidecar — or a proxy in front of it — returned `200 OK` with a body that wasn't a real 3MF (a stock/misconfigured sidecar, a proxy error page, a truncated response, or an OrcaSlicer/Bambu Studio CLI crash that emitted no output), Bambuddy wrote that tiny blob straight to a `.gcode.3mf`, stored it as a valid sliced file (the 3MF-parse failure was swallowed as merely "no thumbnail"), and let it be queued and FTP'd to the printer. Separately, a genuine 413 comes from the reverse proxy in front of the sidecar rejecting the multi-MB upload (model + profiles), not from the slicer — so raising the body limit on the wrong proxy layer had no effect. **Fix.** The slice client now validates the sidecar's output: when a 3MF export was requested, the response body must be a real ZIP (3MF container) or the job fails loudly with an actionable message ("…the body is not a valid 3MF (N bytes) — check the sidecar URL and any proxy in front of it") instead of persisting a corrupt file. A 413 now yields a targeted message naming the fix — raise `client_max_body_size` (or equivalent) on the proxy directly in front of the sidecar. Covered by tests: a 200 with a non-3MF body raises a server error (both the profile and embedded-settings paths), a 413 surfaces the reverse-proxy guidance, a valid 3MF still slices, and raw-gcode preview output is not zip-validated. Wiki troubleshooting updated with both scenarios.
- **File Manager "sort by recent activity" didn't match `ls -t`, and there was no way to see a file's modified date (#2680 / #1770 follow-up, reporter @Kingbuzz0)** — For external (mapped/NAS) folders the folder tree's activity sort and the file pane's date sort put things in a seemingly random order — some entries roughly right, most not — instead of the real newest-first order shown by `ls -t` or Windows Explorer. **Root cause.** Nothing captured the files' actual on-disk modification time. The sort keyed off Bambuddy's own database `updated_at`/`created_at` timestamps, which for a bulk external scan are all the same instant (the scan time), so a whole block of files tied and sorted arbitrarily; only the few rows Bambuddy had later touched individually looked "partially correct." The folder tree also only bubbled up *immediate* child-file activity, so a file added deep in a subtree never lifted its parent folders. **Fix.** External scans now record each file's and each directory's real filesystem mtime (`os.stat().st_mtime`), refreshing it on every re-scan so a file edited over the mount re-sorts correctly. The folder tree's "recent activity" is now a **recursive** newest-descendant roll-up — a freshly-added file anywhere inside a folder lifts every ancestor — and both the tree sort and the file pane's date sort use the real mtime (falling back to `created_at` for managed uploads that have none). A new toolbar toggle shows/hides each item's **last-modified date** in the right-hand pane (grid and list views), and the same toggle puts a date on every row of the folder tree as well, nested folders included. Folders show **last activity** rather than "last modified" — the newest timestamp among the folder itself, its files and everything below it, which is exactly the value the tree sorts on — so a folder holding a file you touched an hour ago reads as an hour old even though its own directory mtime is older. Folders with no activity at all show no date instead of a placeholder. Existing external folders backfill their mtimes on the next scan. Covered by tests: scan captures real file/folder mtimes, a re-scan refreshes a changed file, and a deep file bubbles its subtree's root ahead of a sibling with only a middle-aged file.
- **An AMS-HT slot kept showing the removed filament and never cleared (#2670, reporter @needo37)** — After the #2594 fix, every empty-slot clearing path skipped AMS-HT units, so once a spool was removed the HT slot on the printer card stayed stuck on the old filament (Bambu Studio correctly showed it as Empty). The root cause was the HT's presence signal: firmware reports it as a single consecutive bit in `tray_exist_bits` at `16 + (ams_id − 128)` (HT-A = bit 16, HT-B = bit 17, …), not the regular `ams_id × 4` position — so the bitmask cleanup skipped the HT entirely, and the HT's `state` field is firmware-variant and can't be used instead. Confirmed against a live H2D capture (loaded HT reports the bit set, empty reports it clear) and cross-checked with the OrcaSlicer reference. **Fix.** The bitmask cleanup now understands the HT's real bit position and clears an empty HT slot the same way it clears a regular one, using firmware's own authoritative presence bit — so a loaded HT is never wrongly cleared (its bit stays set, keeping the #2594 fix intact). The AMS change detection now hashes the merged state, so a removal signalled only by the bitmask still unbinds the slot's spool assignment; and the websocket status now carries the presence bit so the card renders "Empty" (not "?") consistently. Verified for both single- and dual-HT setups.
- **The print dialog clipped the per-filament gram usage when the material name was long, especially on mobile (#2669, reporter @apizz)** — In the Print dialog's Filament Mapping, each required filament shows its name and the grams the job needs, e.g. `Bambu PLA Basic (281.2g)`. The name and the gram figure lived in a single fixed-width column that truncated as one unit, so a long name (e.g. `Polymaker PLA Matte`) pushed the `(…g)` off the end and cut it off — partially on a wide screen, entirely in mobile portrait. The gram usage is the more important number here (it's what tells you whether a spool has enough left), so hiding it was the wrong thing to drop. **Fix.** The gram usage is now pinned and never shrinks or truncates; only the material name truncates (with the full name on hover), so the `(…g)` stays fully visible at every width. Applied to both the Specific-Printer and "Any [model]" mapping panels. Frontend-only, no behaviour change beyond layout. Covered by a test asserting the gram figure renders in its own non-truncating element separate from the truncating name.
- **A printer's nozzle size got overwritten to the wrong value (often 0.8mm), then blocked prints as a nozzle mismatch (#2663, reporter @huykent)** — A1 printers with a 0.4mm nozzle intermittently showed **0.8mm** (or no size at all) on the dashboard, and since 1.2.5 that wrong value made the nozzle-mismatch guard (#1899) refuse to dispatch the job — "File sliced for a 0.4mm nozzle, but the printer has 0.8mm installed." It was intermittent and could flip *after* a job was sent. **Root cause.** Bambuddy fetches K-profiles by probing every nozzle size in turn — it sends an `extrusion_cali_get` request for 0.2, 0.4, 0.6 **and** 0.8mm. The printer's response to each echoes the *requested* nozzle diameter at the top level, and the MQTT handler passed every `print` message — including these K-profile responses — through `_update_state`, which treats a top-level `nozzle_diameter` as the installed hardware. So the last size probed (0.8) clobbered the real nozzle size in memory; a later genuine status push would correct it, and the next K-profile fetch would break it again, which is why it flickered and "changed after the job was sent." The raw MQTT status always reported the correct 0.4 — only the derived hardware-nozzle field was corrupted. **Fix.** `extrusion_cali_get` responses are now handled *only* by the K-profile parser and no longer fed to `_update_state`, so they can't touch the nozzle hardware state — mirroring the existing guard that already stops `get_accessories` responses from doing the same thing. The installed nozzle size now comes solely from the printer's real status push, where it was always correct. No configuration or migration needed: the value lives in memory and self-corrects on the next status push after updating. Covered by tests: a 0.8mm K-profile response leaves a 0.4mm nozzle untouched, the response's profiles are still parsed into `state.kprofiles`, and a genuine status push still sets (and corrects) the nozzle.
- **The print queue couldn't be reordered on a phone, and the reorder controls were invisible in portrait (#2667, reporter @aporlebeke)** — On mobile there was no way to reorder the queue: in portrait the reorder controls simply weren't visible, and even in landscape (where the desktop drag handle appears) touch-dragging didn't move anything. **Root cause.** The drag grip and selection checkbox on every pending row are `hidden sm:flex`, so below the 640px breakpoint (phone portrait) they disappear entirely — there's no affordance to grab. Above it (landscape phone/tablet) the grip shows, but it carried `touch-action: manipulation` and the only drag sensor is dnd-kit's `PointerSensor` with an 8px activation distance, so on touch the browser claimed the vertical gesture as a scroll before the drag ever started. The whole reorder mechanism was effectively mouse-only. **Fix.** Pending rows now get tap-friendly **up/down arrow buttons** on mobile (the "arrow select" the reporter asked for), shown below `sm` where the drag handle is hidden. They move a row one step among its siblings — standalone items, whole batches, and items within a batch, in both the flat and per-printer layouts — and persist through the same `POST /queue/reorder` path as drag, so arrows and drag agree. Arrows appear only in the manual "position" sort (with shortest-job-first off), where a position actually has meaning, and are gated on the same `queue:reorder` permission; the up arrow on the first row and the down arrow on the last are shown disabled. Separately, the desktop drag handle's `touch-action` is now `none`, so mouse-style drag also works on touch (landscape phones, tablets). Reuses the existing `queue.moveUp` / `queue.moveDown` translations (already present in all locales). Covered by tests: the controls render for pending items, moving the first item down persists the swapped order, and the boundary arrows are disabled.
- **3D Preview plate thumbnails were broken (401) in File Manager when login was enabled (#2661, reporter @fbordonaro)** — Opening a multi-plate 3MF via **File Manager → 3D Preview** showed broken-image icons for every plate thumbnail, and the network tab showed `GET /api/v1/library/files/<id>/plate-thumbnail/<plate>` returning **401 "Valid camera stream token required."** The Slice dialog displayed the same file's thumbnails correctly, which is what made it look inconsistent. **Root cause.** The plate-thumbnail endpoints (both archive and library) are gated behind a **camera stream token** passed as a `?token=` query param, because an `<img>` tag can't send an `Authorization: Bearer` header. Every place that renders these thumbnails is supposed to append the token via the `withStreamToken()` helper — `PlatePickerModal` (the Slice dialog's multi-plate picker) and the Print modal's `PlateSelector` both do — but the **3D Preview dialog** (`ModelViewerModal`) rendered the raw `thumbnail_url` with no token, so with auth enabled the browser fetched without one and got a 401. **Fix.** `ModelViewerModal` now wraps the plate thumbnail `src` in `withStreamToken()`, matching the two existing call sites. The token is already synced app-wide (the same global the working pickers read), and `withStreamToken()` is a no-op when auth is off, so nothing changes for non-auth setups. Covered by a component test asserting the plate thumbnail `<img>` carries the `?token=` query param.
- **Force color match dispatched a print onto the wrong PLA variant — Matte jobs went to Basic and Silk printers alike, and the wrong AMS slot on a printer holding two same-colour variants (#2650, reporter @MartinNYHC)** — With **Force color match** on, a job sliced for **White PLA Matte** was dispatched to every printer that had *any* white PLA loaded — the ones holding White PLA **Basic** and White PLA **Silk+** included — so a matte model came out glossy on the wrong machine. **Root cause.** Bambu's MQTT status reports every PLA sub-variant as `tray_type == "PLA"`; the Basic/Matte/Silk distinction is carried only in `tray_info_idx` (`GFA00` = Basic, `GFA01` = Matte, `GFA06` = Silk, …), which the 3MF's `slice_info.config` also records per filament. Three places dropped it: the Virtual-Printer queue built each force override as `{slot_id, type, color, force_color_match}` without the parsed `tray_info_idx`; the scheduler's eligibility check (`_get_missing_force_color_slots`) compared loaded trays on `(type, colour)` only — so `(PLA, #FFFFFF)` matched Basic, Matte and Silk indiscriminately and all three printers looked eligible; and the AMS slot mapper cleared `tray_info_idx` when applying the override, so even on the correct printer it could pick a different-variant tray of the same colour. **Fix.** The force override now carries the 3MF's `tray_info_idx`; a slot counts as satisfied only when a loaded tray matches type **and** colour **and** the variant (identical `tray_info_idx`, *or* either side lacks one); and the slot mapper now keeps the variant for force-colour overrides so it pins the matching tray. A blank idx on either side (custom/third-party spools report none, and older 3MFs carry none) falls back to the historical type+colour behaviour, so those setups are unaffected, and a manual filament *swap* (a preference override) still clears the idx so it matches the swapped-in spool rather than the old one. A job sliced for GFA01 now goes only to a printer with GFA01 loaded, and lands on that printer's GFA01 tray. The printer-card queue-compatibility hint (which printers show a pending job as runnable) now applies the same variant rule. Covered by scheduler tests (Matte requirement rejects Basic/Silk, accepts Matte, blank loaded idx falls back, requirement without an idx unchanged; the mapper pins the GFA01 tray over a same-colour GFA00 on both the 3MF and no-3MF paths; a preference swap still matches by colour), a Virtual-Printer test asserting the override carries `tray_info_idx`, and frontend tests for the variant-aware queue hint (rejects other variants, accepts the match, blank-idx and no-variant-data fall back).

### Security
- **Patched two build-time frontend dependencies flagged by `npm audit` (GHSA-r28c-9q8g-f849, GHSA-mh99-v99m-4gvg)** — `postcss` 8.5.15 → 8.5.23 fixes a path traversal in its source-map auto-loader (`sourceMappingURL`) that could disclose arbitrary `.map` files, and `brace-expansion` (pulled in transitively by `eslint` via `minimatch`) is bumped through the existing `overrides` block (`^5.0.7` → `^5.0.8`) for a denial-of-service via unbounded expansion. Both are build/lint-time tooling only — neither is part of the shipped app, so no running Bambuddy install was exposed. `postcss` moved within its existing range; `brace-expansion` needed the pin because `npm audit fix` can't lift `eslint` to the patched transitive on its own.
- **Pinned `react-router` to its most-patched 7.x (7.18.1) and documented the one remaining, unreachable advisory (GHSA-qwww-vcr4-c8h2)** — Staying current on the 7.x line matters: 7.18.1 clears 14 advisories that older 7.x releases carry, several reachable in a browser SPA (open-redirect XSS in `<Link>`/`useNavigate`, route-matching DoS). The single advisory that still flags 7.18.1 — a CSRF bypass — applies only to React Router's **RSC mode**, which requires the server runtime (`@react-router/server`, not installed); Bambuddy is a Vite SPA using `BrowserRouter`, so the vulnerable path is unreachable. There is no non-major fix (the patch landed only in the 8.3.0 major, and `react-router-dom` has no 8.x — adopting it would mean migrating every import to `react-router` plus a React peer bump), so `react-router`/`react-router-dom` are pinned to 7.18.1 and the finding is carried as a documented, fail-closed exception in the CI audit gate: a *different* react-router advisory still fails CI, and the exemption is dropped automatically the moment a non-major fix ships. `npm audit fix --force` is deliberately avoided — its suggested "fix" is a downgrade to 7.11.0, which reintroduces those 14 advisories.


## [1.2.5] - 2026-07-24

### Added
- **Skip Objects can now be selected directly on the top-down build plate** — The skip dialog pairs the plate preview with the slicer's exact per-object pick mask, so clicking a model selects the same object id the printer firmware expects. Multiple objects can be selected before one confirmation, selected and already-skipped items are highlighted on the plate, and the checklist remains available when a pick mask is missing. Selecting every remaining object keeps the printer's existing stop-print warning, and the dialog closes once the skip is confirmed. Confirming names the object when one is selected and counts them when several are, which is what plates of identically-named clones need. The existing layer, permission, and printer-command guards are unchanged.
- **Assigning a spool to an AMS slot now tells you whether the printer actually accepted it (#2582, reporter @gyrene2083)** — Until now, assigning a spool to an AMS tray was fire-and-forget: Bambuddy pushed the filament setting to the printer and immediately reported success, whether or not the tray took it. When the assignment silently didn't land — the reporter's case, where a spool assigned in Bambuddy never showed up in Bambu Studio — nothing told you, and the only way to tell it had loaded was to run a flow calibration and watch for the K-profile to appear. Because a print only deducts filament from the spool assigned to the *exact* tray it pulls from, a silently-dropped assignment also meant that print recorded no filament usage, which is what made the whole thing feel random. Bambuddy now reads the AMS telemetry back after every assignment (from both **Printers → assign spool** and **Configure Slot**) and toasts the outcome: **"Filament loaded on slot X"** once the tray echoes back the filament id that was pushed, a warning if the filament loaded but the **flow-calibration (K-profile) wasn't applied**, or **"couldn't confirm the assignment — check the AMS slot"** if the tray never reflects it within ~30s. The confirmation is derived entirely from the periodic status the printer already sends (an on-demand pushall is nudged so it lands quickly), covers regular AMS, AMS-HT, and external-spool slots, and if the printer goes silent it simply stays quiet rather than inventing a failure. No configuration; the toast appears automatically on assign.
- **Bed levelling, flow calibration, and nozzle-offset calibration now have an "Auto" option, matching Bambu Studio** — These three print options were previously on/off only, so the only way to run bed levelling was to force a full level before every print. Bambu Studio has long offered a third "Auto" state that lets the printer skip the calibration when it was done recently, and that state is what most people actually want. All three options (in the Schedule/Print dialog, the queue bulk-edit, and Settings → Workflow → Default Print Options) are now a three-way **Off / Auto / On** choice, and new prints default to **Auto**. "On" still forces the calibration every time; "Off" skips it entirely; "Auto" lets the printer decide. Existing queued prints and your saved workflow defaults are migrated automatically — anything that was "on" becomes "On (force)" and anything "off" stays "Off", so nothing changes for in-flight jobs until you opt into Auto. The wire encoding mirrors Bambu Studio's exactly (verified against its source), including how prints sent through a Virtual Printer inherit the slicer's own Auto/On/Off pick.

### Changed
- **Orca Cloud profile sync now connects by approving a code instead of the copy-paste sign-in** — Connecting Bambuddy to Orca Cloud used to mean opening an OAuth sign-in in a new tab, watching it redirect to a `localhost` URL that fails to load, then copying that dead URL out of the address bar and pasting it back into Bambuddy. That dance existed only because Orca's auth backend (Supabase) accepts no redirect target other than `localhost`, and the deliberately-broken redirect page confused nearly everyone who reached it. OrcaSlicer has since shipped a first-class external-app pairing API (the OAuth 2.0 Device Authorization Grant, RFC 8628), so the flow is now: click **Connect**, approve a short code on your Orca Cloud settings page, and Bambuddy pairs itself — no redirect, no paste, no client secret, and it behaves identically from a LAN IP, `localhost`, or behind a reverse proxy. Bambuddy requests **read-only** access (it only lists and views your Orca Cloud profiles), keeps the pairing alive with the API's rotating refresh tokens (validated end-to-end against Orca's staging and production servers), and stores nothing beyond the issued token pair. The profile list and detail views are unchanged, so nothing downstream of the connect step looks different. The old paste-based sign-in and the email/password fallback are removed. Points at production Orca Cloud by default; `ORCA_CLOUD_API_BASE` overrides the endpoint for testing.

### Fixed
- **The AMS slot popup stayed on screen and covered the filament dialog it had just opened (#2631, reporter @Jostxxl)** — Tapping **Configure** on an AMS slot left the slot's popup standing on top of the filament type/colour dialog, so the two layers overlapped: obscured content, competing backdrops, and controls of one layer sitting over the other. Most disruptive in the tablet operator workflow, where the printer is opened straight from a plate-clear scan and the next step is setting the loaded filament. **Root cause.** The slot popup is portaled to the page body at `z-[60]`, deliberately, so it can escape the stacking contexts that sibling printer cards create on the dashboard (#1336) — which also puts it *above* the Configure Slot and Link Spool dialogs at `z-50`. Nothing dismissed it: the popup is hidden only by the pointer leaving it, and a touch device never sends that event after the tap that opened it, so on a tablet it simply stayed up. On a desktop it self-cleared as soon as the mouse moved off the popup's bounds, which is why this only ever showed up on touch. **Fix.** The popup now closes itself before running any action that opens a dialog or navigates away — Configure, Assign Spool, Unassign Spool, and both Open in Inventory links, on loaded and empty slots alike — so exactly one dialog is ever on screen. Actions that report progress inside the popup (RFID re-read, Load, Unload, and Copy UUID with its confirmation tick) are deliberately unchanged, since none of them opens a dialog and closing would take their feedback with it. Covered by hover-card tests for loaded and empty slots: the popup is gone after each action, the action still fires, and it does not reappear once a pending open-timer elapses.
- **Slicing a single plate failed on a filament slot the plate doesn't even use, with no way to fix it from the UI (#2628, reporter @michaelklos)** — Slicing plate 2 of a local multi-plate 3MF for an A1 failed with **"filament preset (slot 1) is not compatible with printer Bambu Lab A1 0.4 nozzle"**. Slot 1 was labelled "Filament 1 (PLA) — not used by this plate", held `SUNLU TPU 95A @Bambu Lab H2D 0.4 nozzle`, and its dropdown was greyed out — so the slice was blocked by a slot the plate never touches and the user couldn't correct. Slicing **all** plates worked. **Root cause, two independent defects.** (1) The unused-slot substitution — which replaces the profile in every slot the plate doesn't paint with, so the slicer's validators don't judge the slice on slots its G-code never touches — always copied from **slot 1**. When slot 1 is itself the unused one, that's a no-op (the reporter's log even shows it: `Substituted slot-1 filament for unused slot(s) [1]`), and with several unused slots it actively spread slot 1's foreign profile across all of them — the same poisoning #1851 removed from the picker. (2) The dialog's printer-compatibility matcher only understood BambuStudio's short `@BBL <model>` tag. Profiles you save yourself carry the **full** printer name instead (`… @Bambu Lab H2D 0.4 nozzle`), which the matcher classified as "can't tell" — indistinguishable from compatible — so an H2D-scoped filament was offered in the main dropdown list, auto-picked for the slot on metadata score, and handed to the slicer. **Fix.** The substitution now copies from the plate's lowest **used** slot, so an unused slot can no longer block a slice regardless of what was baked into the source file; if a plate's used slots fall outside the submitted list, the picks are left untouched rather than substituted from a slot the plate doesn't use. And the matcher now reads both tag shapes — the same two forms the AMS slot dialog has parsed since #1623 — including a trailing `(Custom)` suffix and a stray earlier `@` in the name, so a profile scoped to another printer is never auto-picked and is grouped under **Other printers** where you can still choose it deliberately. A profile whose tag names no recognisable Bambu printer stays unclassified and keeps its place in the list, exactly as before. Covered by matcher tests (long-form mismatch and self-match, display-name-vs-short-code models, the nozzle filter, `(Custom)` suffix, the A1/A1 Mini alias, unrecognisable tags, stray `@`), picker tests (the reporter's registry: the H2D profile loses to the A1 one despite a better colour and tier score, but still wins for its own printer), and substitution tests (anchors on the first used slot, doesn't poison sibling unused slots, deterministic lowest-used anchor, support slots as anchor, and the out-of-range no-op).
- **A filament profile could be auto-picked for a printer it doesn't belong to when its name doesn't say which printer that is (#2628 follow-up)** — Slicing for a P2S failed with **"filament preset Bambu PLA Basic @BBL X1C 0.2 nozzle (slot 1) is not compatible with printer Bambu Lab P2S 0.4 nozzle"** — naming a profile that appeared nowhere in the slice dialog. The dialog showed `Overture PLA Matte @0.2` in every slot, including the one the plate actually uses; the slicer resolves that profile's inheritance chain and validates the X1C system profile at its root. **Root cause.** The dialog decides whether a profile fits the selected printer from the profile's own `compatible_printers` list, and falls back to reading the printer out of its NAME. This profile's name carries a nozzle size but no model, so the name fallback couldn't classify it — and the list, though present on the imported copy, is not shipped by every source: Bambu Cloud omits it from its listing on purpose (the per-profile endpoint is rate-limited), and Orca Cloud's listing carried it but Bambuddy only read the filament type and colour out of it. "Can't tell" is treated as usable, so the profile scored its way into the auto-pick for a printer it was never built for. **Fix.** Orca Cloud profiles now surface their own `compatible_printers` (it was already in the data Orca returns — no extra request), and the existing same-name bridge that lends Bambu Cloud entries their filament type and colour from another source now lends the compatible-printer list too, in both directions between the cloud sources. So whichever copy of a profile knows its printers teaches the ones that don't. As a last resort for profiles no source can classify, a bare `@<size>` tag in the name is now read as a nozzle size: it can rule a printer out (0.2 profile, 0.4 printer) but never rules one in, since a size says nothing about the model — and a number that can't be a nozzle (`@2026`) is ignored rather than guessed at. Profiles that still can't be classified keep their place in the list exactly as before; ones that can are grouped under **Other printers**, where you can still pick them deliberately. Covered by preset-listing tests (Orca list extraction incl. the bare-string form, malformed/empty lists staying unclassified, the bridge in both directions and for both process and filament, never overwriting a list an entry already has, no-donor staying unclassified, and the borrowed list being copied rather than shared across the per-user caches) and matcher tests (0.2-vs-0.4 rejection, matching size staying unclassified, the `0.2 nozzle` / `0.2mm` spellings, numeric `0.20` vs `0.2`, implausible sizes ignored, and model-bearing tags still taking the model path).
- **Switching off an accessory smart plug at the end of a print knocked the printer into "Unknown" and stalled the queue (#2629)** — With an end-of-print auto-off on a plug that powers a *filter fan* (not the printer), the printer flipped to **Unknown** the moment the plug switched off and the queue stopped dispatching to it until a manual **Force Refresh**. The printer itself never went anywhere — MQTT traffic continued a second later. **Root cause, two parts.** (1) Bambuddy treats *any* plug linked to a printer as that printer's power supply: every auto-off — time delay, temperature delay, the time-of-day schedule, a resumed-after-restart off, and a manual off from the plug card — immediately marked the printer offline, whether or not the plug feeds it. (2) That mark was **unrecoverable**. It forces `connected=False` and the state to `unknown`; `connected` heals on the very next MQTT message, but the state does not — the printer state is only rewritten when a status frame carries `gcode_state`, and the steady-state frames a P1S sends are partial. So `unknown` stuck until the next full status push, and the scheduler (which dispatches only to `IDLE`/`FINISH`/`FAILED`) treated the printer as permanently unavailable. **Fix.** The offline mark is now an explicitly *presumed* power cut: the state it overwrites is remembered, and the presumption is undone as soon as the printer sends another report on its own topic, since inbound traffic proves the power was never cut (a frame that does carry `gcode_state` still wins, and the recovery re-broadcasts so the UI un-greys). A printer whose power really was cut sends nothing, so it correctly stays offline — this also repairs the same stuck-`unknown` for a genuine printer plug whose MQTT resumes without a full push. On top of that, each plug now carries a **Powers the printer** toggle (shown when a printer is linked, in both the plug card and the add/edit dialog): leave it on for the plug that feeds the printer, turn it off for accessories — filter fan, chamber light, enclosure heater — and switching those off no longer touches the printer's state at all. Existing plugs are migrated as power plugs, so nothing changes until you say otherwise. The same flag also fixes the queue's power-on step, which used to pick whichever linked plug came first and could spend the whole power-on timeout waiting for a filter fan to boot a printer; it now picks the plug flagged as the power source. Covered by an end-to-end regression test that drives the real MQTT client, printer manager and scheduler through the reported sequence (accessory off → printer keeps talking → queue dispatches again; real power cut → stays offline), MQTT-client tests (presumed off remembers and restores the state, a partial frame recovers it, a real `gcode_state` overrides it, request-topic traffic does not count as proof of life, a reconnect discards the saved state, and a genuine second power cut is not undone), smart-plug tests (accessory plugs switch off without marking the printer offline on all four off-paths, power plugs keep the old behaviour), scheduler tests (power-plug selection), and migration tests on both SQLite and PostgreSQL.
- **A2L "AMS Lite" slots showed as empty and never deducted filament** — On an A2L with the 4-slot AMS Lite attached, physically loaded slots could display as empty, filament usage was never deducted from the loaded spool, and linking an AMS-Lite slot to a Spoolman spool failed outright. **Root cause.** The A2L reports its AMS Lite as unit **id 16**, but the firmware is internally inconsistent about it: its slot-presence bitmasks sit at the bit positions for unit **6** (bit base 24), and it reports the actively-feeding slot (`tray_now`) as a **local** 0-3 index rather than a global tray id. Bambuddy's `ams_id*4+slot` convention, fed the raw id 16, probed bit positions 64-67 (always zero) and marked every loaded slot empty; the local `tray_now` was read as a global id, so usage was attributed to the wrong spool (or dropped); and the `ams_id <= 7` database constraint rejected id-16 Spoolman links. **Fix.** The AMS Lite is now normalised from unit **16 → 6** at the MQTT ingest boundary, so its global tray ids land at **24-27** — matching the firmware's own bit base, working with every existing `ams_id*4+slot` consumer (slot presence, usage tracking, deficit warnings, the scheduler, Load/Unload), colliding with nothing, and passing the database constraint. The local `tray_now` is globalised to `24+slot` so deduction hits the right spool, the valid-tray guards accept the 24-27 range, and the printer card labels the unit "AMS Lite". Prints dispatched to the Lite build the correct `ams_mapping2` (`{ams_id:16, slot_id:0-3}`) and flat mapping (local 0-3), both confirmed against the firmware's own mapping. Outbound slot commands (set filament, reset, load/unload, calibration, RFID refresh) translate the normalised id 6 back to the physical 16 on the wire, centralised in one helper. The whole normalisation is self-scoping — only unit id 16 is ever touched, so every other printer and AMS type is byte-for-byte unaffected. Verified against the reporter's live captures (slot presence via `tray_exist_bits`, and `tray_now` while printing a known physical slot); mixed setups (a regular AMS attached alongside the Lite) are out of scope and log a warning, and one uncaptured wire encoding (the physical global tray field on `load`/`calibration` commands) is extrapolated and isolated to the single translation helper.
- **Bambu Cloud kept dropping to "sign-in expired" and forcing constant re-logins, even while cloud features still worked** — Since the #2562 status rework, the Bambu Cloud sign-in would flip to "expired" shortly after logging in, over and over, with nothing in the logs to explain it. **Root cause.** The rework made a genuine 401 from Bambu durably record the stored token as dead (`cloud_token_invalid_at`) — correct in principle, but it treated **any** HTTP 401 from **any** cloud or MakerWorld call as a dead token. Bambu returns 401 for plenty of non-fatal reasons (an endpoint-, region- or scope-specific refusal; a Cloudflare-edge blip; a brief backend hiccup), so a single stray 401 from any one call — including a background poll — durably signed the whole cloud integration out until the next manual re-login. Because the flag lives in the database, a setup running more than one Bambuddy instance against the same database made it worse: a stray 401 seen by either instance signed the user out in both. **Fix.** Invalidation now fires only for Bambu's documented token-expiry response — `{"code":4,"error":"Please login."}` — and never for a plain or unparseable 401, which is treated as transient (the request fails, but the session is left signed in). The same signature gate is applied to the MakerWorld path, which shares the token. A genuinely expired token is still detected and surfaced exactly as before; what stops is the false "expired" on a working session. Covered by service tests for both engines: `code:4` and the "Please login." text invalidate, while a benign `code:1`/`forbidden` 401, an unparseable 401, and (for MakerWorld) a signature-less 401 with a token do not.
- **Every SpoolBuddy screen crashed the moment a text field was focused (#2616, reporters @MartinNYHC, @agentdr8)** — Tapping the Search box on the SpoolBuddy inventory, or the Search / Color Name / Brand fields on the write-tag New Spool tab, blanked the UI with a minified React error #130 ("Element type is invalid… but got: object"). It hit both internal and Spoolman inventories, so it was not data-specific. **Root cause.** The SpoolBuddy shell mounts an on-screen keyboard (`VirtualKeyboard`) that pops up on `focusin` for any text input — which is why every field on every SpoolBuddy page tripped it, while the main app (no on-screen keyboard) was fine. That component does `import Keyboard from 'react-simple-keyboard'`, a CommonJS package, and under the current bundler's CJS→ESM interop the default import resolves to the module **namespace object** (`{ KeyboardReact, default }`) rather than the component itself. Rendering that object as `<Keyboard>` put an object where an element type belongs, and React threw. (The discrepancy is interop-specific: the test runner hands back the real component, so it only manifested in the browser build — which is why it needed a runtime, not a type, fix.) **Fix.** A small `resolveInteropDefault` helper unwraps such an interop-wrapped default: it returns the value as-is when it's already a usable element type (function/class, tag string, or a `$$typeof`-marked forwardRef/memo/lazy) and otherwise falls through to `.default` and named exports. `VirtualKeyboard` resolves the real `react-simple-keyboard` component through it, so the keyboard renders under any interop shape. Covered by unit tests for the resolver against the object shape, a named-only export, a forwardRef object, and a bare component, plus a render test that mounts the keyboard on input focus.
- **The streaming overlay (`/overlay`) showed nothing in OBS when login was enabled (#2613, reporter @MartinNYHC)** — With authentication on, the overlay page worked when opened in a browser where you were already signed in, but stayed blank in OBS. The reporter suspected their Cloudflare/remote setup; it was unrelated. **Root cause.** The `/overlay/{id}` *route* renders without a login, but every piece of data it draws is auth-gated — printer status and name (`PRINTERS_READ`), one setting (`SETTINGS_READ`), and the camera stream (a camera-stream token). In your own browser those ride the JWT from local storage and the app-wide stream-token sync; OBS is a fresh browser with **no session**, so the status calls 401'd and the overlay never populated (the same would happen in any private/incognito window — remote access was never the cause). Unlike the Cam Wall (`/camwall?token=…`), the overlay had no token mode, and a long-lived token couldn't help because the JWT-gated status/settings endpoints reject it. **Fix.** The overlay is now a self-contained kiosk surface. A new **Streaming Overlay** long-lived-token scope is offered under Settings → API Keys (with a ready-made `/overlay/{id}?token=…` URL copied once on creation); the overlay page reads `?token=` from the URL and, in that mode, authenticates its status and camera calls with the token instead of a JWT (and skips the WebSocket, falling back to its existing 2 s poll). A new token-authenticated `GET /printers/{id}/overlay-status` returns exactly the fields the overlay draws — name, camera rotation, live print state, and the one setting — and nothing else. The scope is deliberately **separate from `camwall`**: the overlay names the file on screen, which the Cam Wall is trusted never to expose, so folding it in would have silently widened every existing wall token. The logged-in path (opening the overlay while signed in) is unchanged. Docs updated to explain the token and stop claiming the overlay needs no authentication. Covered by backend tests (scope boundaries in both directions — an overlay token can't reach the Cam Wall feed and a camwall/camera-stream token can't reach the overlay feed — plus the payload shape, disconnected-printer shape, and revoked/absent/garbage-token rejection) and frontend tests (kiosk mode reads the token feed and carries the token to the camera, never touches the JWT-only status endpoint or a socket; the mint UI offers the scope and hands over the assembled OBS URL).
- **Reassigning a queue item while it was dispatching split it across two printers (#2615, reporter @Jostxxl)** — Editing a queue item's printer while its FTP upload was already in flight left the queue row pointing at one printer while the archive, expected-print registration, and the physical `project_file` command had gone to another. On a farm this made the reassigned-to printer look broken (marked `printing` but never sent the job), left the row permanently inconsistent, and could trigger a duplicate dispatch after a restart. **Root cause.** A queue row stays `status='pending'` for the entire (multi-minute) FTP upload — status only flips to `printing` at the very end. The edit route only blocked non-`pending` rows, so a `PATCH` during the upload window was accepted; the in-flight dispatch kept using the printer it had snapshotted at the start, while the DB row's `printer_id` changed underneath it. The existing #1853 CAS guards *cancellation* mid-dispatch, not *reassignment*. **Fix.** A `dispatching_at` claim is stamped atomically on the row (`WHERE status='pending' AND dispatching_at IS NULL`) the moment the scheduler begins dispatching, before any slow I/O, and cleared when dispatch ends. While it's held, both edit routes reject changes — the single-item `PATCH` returns **409** (re-checked immediately before the write to close the read-modify-write gap), and bulk edits skip the row — and the scheduler's selection query won't re-pick it. Startup reconciliation clears any claim orphaned by a crash mid-dispatch (no dispatch coroutine survives a restart, so every claim present at boot is stale), so a stale token can never wedge an item out of the queue. The row stays `pending` throughout, so no status-consumer, UI, completion, or reconciliation path had to change. To move a dispatching item, cancel it first (the coordinated escape) and re-queue. New column `print_queue.dispatching_at` (nullable timestamp, dialect-safe DDL — SQLite `DATETIME` / Postgres `TIMESTAMP`). Covered by scheduler tests (claim is exclusive, fails on non-pending rows, releases on every exit, skips an already-claimed row, startup clears stale claims) and API tests (reassign returns 409 with `printer_id` unchanged, bulk skips the claimed row, an unclaimed pending row still edits normally).
- **A single plate printed from a multi-plate 3MF recorded the whole file's filament in statistics (#2614, reporter @Jostxxl)** — Dispatching one selected plate of a sliced multi-plate 3MF through the queue could log the **entire file's** filament against that one plate. The reporter's `heart 3.gcode.3mf` has 22 plates totalling ~12.0 kg; every completed plate recorded `12006.49 g`, so 13 runs inflated lifetime/user/project/filament stats by ~156 kg from one file. **Root cause.** The per-run value written to `PrintLogEntry.filament_used_grams` prefers the AMS-tracked spool delta, but when the tracker measured nothing (no inventory assignment on the printer) a *completed* run fell back to `PrintArchive.filament_used_grams` — which is deliberately the **sum over every plate** of the source 3MF (correct for the archive card and project rollup, #1593). The archive's `plate_id` (persisted by #2603) was never consulted on this path, so the whole-file total was copied verbatim; `cost` had the same defect, falling back to the whole-file `archive.cost`. **Forward fix.** When the archive carries a `plate_id` and its 3MF is on disk, the completed-run fallback now uses that plate's own slicer estimate (`extract_plate_metadata_from_3mf`, the same plate-scoped parse the inventory tracker uses), and scales cost by the plate's share of the whole. The tracker-measured path is unchanged (measured spool deltas still win) and single-plate archives are unaffected (plate value equals the whole-file value). **Backfill.** A startup migration repairs rows already written: for completed print-log entries whose stored grams **exactly equal** the linked archive's whole-file value (the mis-copy signature) and whose archive has a `plate_id` and an on-disk 3MF, it recomputes the plate-scoped grams + cost. The exact-match guard means tracker-measured rows (a rounded spool-delta sum) and partial-progress rows (scaled to progress) are never touched; it's idempotent (a corrected row no longer matches) and data-only, identical on SQLite and Postgres. Logs how many rows and how many grams of over-count it removed. Covered by unit tests for the forward helper (plate scoping, cost scaling, fallbacks when there's no plate_id / no file / unreadable estimate) and the backfill (mis-copy repaired, tracker/partial rows untouched, missing-3MF skipped, single-plate not relabelled, idempotent).
- **Progress notification ran off the left edge of the screen in the installed iPhone PWA (#2612)** — On an iPhone 13 Pro with Bambuddy added to the Home Screen, the print-dispatch progress toast was clipped off the left side of the display — text like "prints", "plate_6", and "MB (21.0%)" bled past the edge. **Root cause.** The toast viewport is anchored `right-20` (80 px from the right, to clear the bug-report bubble) and the dispatch toast has a fixed `w-[420px]`. On a phone that's 390 CSS px wide, 420 + 80 overflows the left edge by ~110 px — the toast simply didn't fit. **Fix.** Every toast now carries a viewport-relative `max-width` (`calc(100vw - 6rem - safe-area insets)`) so it can never exceed the screen; on desktop the 420 px still wins. The viewport's position is also now safe-area-aware (`env(safe-area-inset-*)` on bottom/right) so an installed PWA clears the home indicator and a landscape notch, and the per-job filename row gets `min-w-0`/`shrink-0` so long names truncate instead of pushing the toast wide at the narrower phone width. Frontend-only; no backend, schema, or i18n change. Covered by a test pinning the viewport-relative width cap.
- **Multi-plate queue prints lost the selected plate in Print History and a stopped-while-offline print stayed "printing" (#2603, reporter @Jostxxl)** — Cancelling a print queued from a specific plate of a multi-plate 3MF showed it in Print History as **Plate 1**, so you couldn't tell which plate to requeue. **Root cause.** The archive derives its plate from the *filename*, but a whole multi-plate 3MF uploads under one name with no plate suffix, so the parser defaulted to plate 1 and `extra_data` held all-plates aggregate metadata; the queue row kept the correct plate but nothing copied it onto the archive, which had no plate field at all. **Fix.** `print_archives` gains a nullable `plate_id`, copied from the queue item at dispatch (both the archive-based and library-file paths), exposed in the archive API, and rendered in Print History (falling back to no plate label only when genuinely unknown). A startup backfill copies the plate onto existing archives from their linked queue rows, so already-cancelled prints recover their plate. Additionally, **stopping a printing item while the printer was offline left the linked archive stuck at "printing"** — the queue row was cancelled but, with no printer to send an MQTT completion, nothing ever reconciled the archive. The offline-stop path now closes the archive out directly (status `cancelled`, `failure_reason` "Stopped by user (printer was offline)"); the online path is unchanged and still leaves the archive to the MQTT completion event. Column add + backfill are identical on SQLite and Postgres. Covered by tests for plate persistence, the backfill (including no-clobber/idempotency), and the offline vs online stop reconcile.
- **`queue_max_concurrent_uploads` behaved as a per-batch cap instead of a refillable pool (#2602, reporter @Jostxxl)** — On a large farm, unused upload slots sat idle whenever any upload from the current batch was still running. **Root cause.** `check_queue()` awaited `_dispatch_selected()`, which awaited `asyncio.gather()` over the whole selected batch before returning — so the scheduler's run loop was blocked until the *slowest* FTP transfer in the batch finished. A 96 MB 3MF that took 513 s to upload left 15 of 16 configured slots unused for 8.5 minutes on a 93-printer farm, even as other printers came free; jobs that became eligible during the long upload couldn't be dispatched. The batch-await was load-bearing for one reason: `_start_print` flips a row `pending → printing` only *after* its upload completes, so returning early would have let the next pass re-dispatch the still-`pending` in-flight rows. **Fix.** Uploads now run as independent background tasks tracked in a `_inflight` pool. Each tick excludes in-flight item rows (and their printers) from selection, launches at most `limit − len(_inflight)` new uploads, and returns immediately — so a freed slot refills on the next fast (3 s) tick instead of waiting out the whole batch, and the configured limit finally behaves as a continuously-refillable worker pool. The no-double-dispatch invariant the batch-await used to provide is now carried by the in-flight exclusion; the `pending → printing` CAS, the busy-printer guard (#2598), the per-printer dispatch hold, auto-drying exclusion (in-flight printers stay out, including on the no-pending-items path), and per-item failure isolation are all preserved and run per task. Investigated with the reporter's large-farm hotfix and reproduction; covered by rewritten pool tests (cap holds across refills, freed slot refills, in-flight item/printer excluded from re-selection, check_queue returns without awaiting uploads).
- **Configuring a built-in/generic filament on an AMS slot reverted to the old profile a moment later (#2604, reporter @Jostxxl)** — Selecting a built-in preset (e.g. Generic ABS) through **Printer → AMS slot → Configure** briefly showed the new material on the printer, then the slot snapped back to whatever was there before (e.g. an old Generic PETG). **Root cause.** The Configure AMS Slot modal sends built-in, local, and Orca-generic presets with a `GF*` `tray_info_idx` but an **empty** `setting_id` (those presets carry no Bambu Cloud setting id of their own), and the `configure_ams_slot` route forwarded that empty value straight to `ams_filament_setting`. The firmware treats a slot that has a filament id but no setting id as half-configured: it accepts the update, then reverts to its previously stored profile. The inventory/assignment path already guards against this by deriving the setting id from the filament id, but the manual Configure path didn't, leaving two inconsistent code paths. **Fix.** `configure_ams_slot` now back-fills `setting_id` from the resolved `tray_info_idx` via `filament_id_to_setting_id` whenever the client sent none (e.g. `GFB99` → `GFSB99`), mirroring the inventory path. Doing it server-side also protects API callers and any future frontend. `P*` user presets and already-`GFS*` values are left untouched, and an explicitly-supplied `setting_id` (including the `PFUS*` pair) still passes through unchanged. Covered by tests for the built-in empty-`setting_id` case and the material-only generic-fallback case both publishing a derived `GFS*` id.
- **The HT-A (AMS-HT) spool vanished a few seconds after every power-on (#2594, reporter @GuillaumeHouba)** — On an H2C, the spool in the HT-A high-temp AMS on the left nozzle showed correctly with its RFID assignment on power-on, then disappeared seconds later; the regular AMS spools stayed. **Root cause.** The AMS merge in `_handle_ams_data` clears a tray when it receives a partial `{id, state}` update whose `state != 11` — the rule that lets 4-slot AMS units (e.g. H2D) report an emptied slot with just `{id, state}` and no `tray_type` (#784), where `11` = loaded. But an **AMS-HT** (single-tray high-temp dry box, unit id ≥ 128) reports its *loaded* tray as `state=9`, not 11 — it doesn't feed filament into a shared buffer the way a 4-slot AMS does. So the partial `{id:0, state:9}` the printer sends for the HT tray on power-on was misread as "slot emptied," and Bambuddy wiped the tray's `tray_type` / RFID / Spoolman assignment. The support log showed it plainly: every "state=9 (not loaded) — clearing stale tray data" was on AMS 128, never on the regular AMS unit 0 (which correctly reports 11). **Fix.** The `state != 11 → empty` heuristic is now skipped for AMS-HT units (id ≥ 128); their differing single-tray state semantics mean a partial state update must not clear a present spool. A genuine HT spool removal still clears through the explicit `tray_type == ""` update and the `tray_exist_bits` cleanup, both unchanged, and regular AMS behavior (id < 128) is untouched. Covered by tests for the HT tray surviving a `state=9` partial, the HT still clearing on an explicit empty, and the existing regular-AMS `state=9`/`10`/`11` cases.
- **A start-print dispatched to an already-busy printer could cancel the running job (#2598, reporter @khaosdoctor)** — On an A1 mini across a night of prints, jobs were cancelled with no apparent cause; debug logs showed Bambuddy sending `project_file` twice ~3 minutes apart with no completion between, and the printer answering `0500_4004` ("Device is busy and cannot start a new task") — which on that model cancels the RUNNING print. **Root cause.** `start_print()` in the MQTT client guarded only on connection state (`self._client and self.state.connected`) — it published `project_file` with no check on the printer's `gcode_state`. The scheduler *does* gate dispatch on an idle check, but that check treats `FINISH` as idle, and a printer can keep reporting `FINISH` for tens of seconds *after* it accepted a `project_file`; combined with a dispatch watchdog that reverts a queue item and releases its dispatch hold when it doesn't observe the active-state transition in time (#2555), a re-selected item could reach the FTP upload while the printer had actually started, so the start command landed on a live print. **Fix (defense-in-depth).** (a) `start_print()` now refuses to publish `project_file` when the printer is in an active state (`PREPARE` / `SLICING` / `RUNNING` / `PAUSE`) and returns without sending — a single guard at the one publish choke point that every dispatch path (queue, manual, webhook, Virtual-Printer forward) funnels through. `IDLE` / `FINISH` / `FAILED` remain valid start targets. (b) The scheduler re-checks the live printer state right before the FTP upload and *defers* a busy printer (leaves the item pending for a later tick) instead of uploading and dispatching — no wasted transfer, no collision. (c) If the printer goes busy during the upload window and the start command is refused, the scheduler reverts the item to pending (a deferral) rather than marking it failed — a busy printer is not a failure. Covered by tests for the client-level guard (refused while busy, published while idle, guard precedes the connection check) and the scheduler deferring both before the upload and after a busy-refused start. Note: a transport-level MQTT QoS-1 replay on reconnect would bypass the client guard, but the dispatch/watchdog reconnect path already hard-resets the client with a fresh session so it has no inflight `project_file` to replay.
- **Three more idle-in-transaction / thundering-herd paths surfaced by continued farm testing (#2572, reporter @Jostxxl)** — On `origin/dev` with 93 printers and multiple concurrent UI clients the reporter timestamp-correlated the surviving pool pressure to three remaining paths, none of them auth-related. **(a) The scheduler held its per-item session across preheat and the FTP upload.** `_dispatch_selected` opens one `async_session` per queue item and hands it to `_start_print`, which reads the printer/archive rows up front and then runs the preheat/heat-soak wait and the FTP delete+upload — all on the transaction opened by those first `SELECT`s. One correlated session's last statement was a `settings` `SELECT` at the exact moment the log showed "Starting queue item" → preheat → "FTP upload started" for a 96 MB 3MF; the transaction stayed open for the whole transfer. (This refines the earlier note that the scheduler paths were "already bounded" — the per-item session itself was the hold.) `_start_print` now commits right before the FTP delete/upload, and `_preheat_and_soak` commits after its read phase and before the up-to-15-minute soak wait (both loops touch only `printer_manager` state and `asyncio.sleep`, no DB). `expire_on_commit=False` keeps the loaded rows readable; the status writes afterward (upload-failure path and the pending→printing CAS) transparently open a fresh transaction. **(b) `/cloud/filament-info` held its request session across sequential Bambu Cloud round-trips and single-flighted nothing.** The route took its session via `Depends(get_db)` (held for the whole request), read the stored token, then looped over the uncached ids issuing one external `get_setting_detail` HTTP call each — so the session sat idle-in-transaction across N cloud calls, and because the printer overview mounts one filament-info request per printer card, several browsers hit the same uncached preset at once and each issued its own cloud call. The route now releases the transaction (`rollback`) right after the token read and before the cloud loop (Phase 3's local-preset read reopens a fresh one), and concurrent misses for the same id single-flight through one shared cloud call. **(c) `/printers/{id}/cover` had no in-flight coalescing.** The connection was already released before the download, but simultaneous clients could all miss the cache and each run the full multi-path FTP lookup + 3MF extraction (one observed transfer pulled an 81 MB 3MF while real print uploads were in flight). Identical concurrent cover requests now coalesce: the first becomes the leader and the rest await it, then serve from the positive/negative cache it filled. Also adds `pool_use_lifo` (PostgreSQL default on, `DB_POOL_USE_LIFO` override, shown in `/system/db-pool`) so a bursty farm keeps a small hot connection set busy and lets excess overflow connections age out via `pool_recycle` instead of churning the whole pool. Covered by tests: the scheduler releasing its connection before both the FTP upload and the soak wait, the filament-info single-flight (concurrent misses share one cloud call, cache-hit skips cloud, a failed fetch leaves no stuck in-flight entry), and concurrent cover requests downloading once.
- **An "Any [model]" queue job dispatched from a Virtual Printer printed to the empty external spool and aborted at layer 0 (#2595, diagnosed by @Sawtaytoes, PR #2596)** — On a farm of identical X1Cs with different filaments loaded per AMS, the intended flow — VP in Queue mode, auto-dispatch, target **Any X1C**, force-colour-match picks the printer that has the right spool — sent the job to the correctly-matched printer and then failed: the printer ignored the AMS, pulled the empty external spool, and aborted with "not enough filament", even though the mapped slot was loaded (the same print via a specific printer, or straight from the slicer, worked). **Root cause.** A slicer talking to a Virtual Printer only ever sees the VP's external spool — a VP advertises no AMS — so the slicer sends `use_ams=false`, and VP intake stamps that onto the queue item. But an "Any [model]" item is colour-matched to a real printer *at dispatch*, resolving a real AMS slot in `ams_mapping`; the scheduler still forwarded the stale `use_ams=false`. The print-command builder only ever forced `use_ams` **off** (the all-external case) and never back **on**, so `use_ams=false` shipped alongside `ams_mapping=[<real tray>]` → external spool → abort. **Fix.** For single-nozzle printers the resolved mapping is now authoritative: a real AMS tray (0-253) forces `use_ams=true`; an explicit external selection (254/255) still forces it false; an unresolved `-1` mapping does neither (preserving the #2589 contract — it should have been recomputed upstream, and must not be silently promoted to AMS or downgraded to external). Dual-nozzle printers are untouched, where `use_ams` encodes nozzle routing rather than an on/off flag. Because the correction lives at the single command-builder choke point, it fixes the VP, queue, and manual paths alike. Covered by tests for the VP `false`+real-tray promotion, padded mappings, all-external staying off, unresolved `-1` staying put, the original all-external downgrade, and the dual-nozzle bypass.
- **Reconnecting or restarting inflated Stats → Total Print Time by hundreds of hours on large farms (#2592, reporter @Jostxxl)** — On the reporter's farm a restart pushed Total Print Time from ~1,500h to 3,215h. When a printer reconnects, the connected edge runs `reconcile_stale_active_prints`, which closes out every archive still stuck in `status="printing"` (missed completions, disconnects, restarts) by synthesising an aborted `on_print_complete`. That wrote a `PrintLogEntry` whose duration was `completed_at - started_at` — but for a reconciled archive the real end time is unknown: the print stopped somewhere during the disconnect, and `completed_at` is only the reconnect moment. So each stale archive banked its entire multi-day gap as print time (one row was 51.9h), and a printer with several stale archives contributed hundreds of fabricated hours at once. Worse, the Stats total *recomputed* `completed_at - started_at` whenever the stored duration was falsy, so storing NULL wouldn't have helped. Reconciled completions now log an explicit `duration_seconds = 0` (honest "no measured runtime") and the two Stats time paths trust a stored 0 instead of recomputing from the stale timestamps — legacy rows that never recorded a duration still fall back as before. Reconciled aborts also get a truthful `failure_reason` ("Stale - reconciled after reconnect, end time unknown") instead of being mislabelled "User cancelled". Genuine long prints are untouched: nothing is capped, a still-running >24h print is never treated as stale, and a real >24h run keeps its full measured duration. Re-running reconciliation is already idempotent (the archive flips to `aborted`, so it isn't re-selected). Existing inflated rows from before this fix are not auto-corrected — they're indistinguishable from real cancellations in the database, and a blanket cap would clobber genuine long prints; the reporter repaired his own rows by hand. Covered by tests for the multi-day reconcile, multiple stale archives per printer, a retained >24h print, and the Stats total ignoring reconciled time while still counting real runtime.
- **H2C prints intermittently recorded no filament and never deducted from inventory (#2582, reporter @gyrene2083)** — On an H2C (firmware `01.02.00.00`) filament usage sometimes wasn't deducted and the Print Log showed no filament for that print; the reporter confirmed the tell-tale detail — the failed print's archived `.3mf` didn't exist to download. Filament totals, the Print Log filament column, and the weight deduction all read the sliced 3MF's data, so when that file can't be pulled off the printer the print drops to the no-3MF fallback archive and every one of them comes up empty. The download itself was the failure: the H2C is the same H2 generation and the same firmware line as the P2S, whose FTPS data channel trips a vsFTPd + TLS 1.3 session-reuse bug on Python 3.13 (#1401) — and the X2D hit the sibling handshake variant (#1638). Both were fixed by capping that model's FTP control/data channel to TLS 1.2 via the per-model FTP profile registry, but the H2C had no entry and so ran on the Python-default TLS 1.3, leaving its 3MF downloads to fail the same way (intermittently, matching the "sometimes works, sometimes doesn't" report — the session-reuse race rather than a hard handshake failure). The H2C now gets the same `cap_tls_v1_2` profile as the P2S/X2D (with its `O1C`/`O1C2` SSDP codes mapped to it), so the sliced 3MF comes off the printer reliably and the slice data — filament total, Print Log filament, and the inventory deduction — is populated again. H2D is deliberately left on the default profile; it negotiates TLS 1.3 without this fault.
- **An unresolved AMS mapping silently dispatched a P1S print to the empty external spool (#2589, reporter @Jostxxl)** — A queued P1S job with a regular AMS attached, two compatible PETG spools loaded, and nothing on the external spool holder started against the *external* feed and paused seconds later with a filament-runout HMS. The queue row was correct on its face — `use_ams=true` — but carried `ams_mapping=[-1]`, and Bambuddy turned that into a print with no AMS. Two faults combined. **A `-1` was read as "external spool."** The command builder's rule for "all slots are external, so drop `use_ams`" tested `t < 0 or t >= 254` — folding the *unresolved* sentinel (`-1`) in with a genuine external selection (`254`/`255`). An explicit external print serializes as `[254]`; an unresolved slot serializes as `[-1]`, and the two mean opposite things — one is "use the spool holder", the other is "we never worked out which tray." Only `>= 254` may now force `use_ams=False`; `-1` never does. **The unresolved mapping was trusted instead of recomputed.** The scheduler only computes a mapping when the row has *none*; a stored `[-1]` is non-empty, so it looked "already resolved" and was passed through verbatim — even though the backend had the live AMS trays and the plate's filament requirements right there and could have matched them. Dispatch now recomputes whenever the stored mapping is entirely unresolved, so a bogus `[-1]` self-heals against the trays actually loaded (and any pre-existing stuck row heals on the next scheduler pass); if nothing compatible is loaded it is cleared rather than sent, so the firmware reports a clear mapping error instead of quietly printing to an empty feed. **Where the `[-1]` came from.** The Print dialog builds the mapping from the selected printer's live status; if you submitted a single-printer job in the instant before that status query resolved, it matched against zero known trays and serialized every required slot as `-1`. The dialog now waits for the printer's AMS status before it will submit (showing a brief "Waiting for AMS status from …" notice), and the mapping hook returns *no* mapping rather than an all-`-1` one while the trays are unknown — so the scheduler resolves it at dispatch. A genuine no-match with trays present still serializes `-1` and surfaces the mismatch as before. **Tests.** Backend: the command builder keeps `use_ams=true` for `[-1]`/`[-1,-1]` and a padded `[-1,-1,5]`, still drops it for an explicit `[254]`; the scheduler recomputes a stored `[-1]`, leaves a resolved (or manually-overridden) mapping untouched, and clears an unresolvable one. An existing test that asserted the old `[-1] → use_ams=False` behaviour was corrected to the fixed contract. Frontend: the mapping hook returns `undefined` while status is loading, resolves to the AMS tray once it arrives (type-only match with strict colour off), and still emits `-1` for a real mismatch. Full backend suite and the PrintModal/mapping frontend suites green.
- **Pushover Emergency priority (2) was rejected by the Pushover API (#2586)** — Setting a Pushover provider to priority 2 (Emergency) made every notification fail with Pushover's own error that `retry` and `expire` are required. Pushover *mandates* those two parameters for Emergency alerts — `retry` is how often it re-alerts (minimum 30 s) and `expire` is when it stops (maximum 10800 s / 3 h) — and Bambuddy never sent them, so the message was refused before it left the app. Priority 2 now works: two new optional fields (Emergency Retry / Expire) appear on the Pushover provider **only when priority is set to 2**, default to a sensible 60 s / 3600 s, are clamped to Pushover's legal 30–10800 s range, and are sent only at priority 2 (Pushover ignores them at other priorities). Emergency alerts now keep re-alerting until acknowledged, as intended.
- **P2S RTSP timeout could leave the fan-out camera stream permanently stalled (#2580, reported and diagnosed by @ronaldheft, fix shape from PR #2581)** — After an RTSP read timeout, the stream cleanup killed the stalled ffmpeg and then waited *unbounded* for it to be reaped. A SIGKILLed ffmpeg stuck in uninterruptible I/O on a dead RTSP socket can take arbitrarily long to exit, so the fan-out stream coroutine sat parked in that wait — in the reported case for 12 hours — while every new viewer attached to the stalled broadcaster and got no frames (snapshots and diagnostics kept working, since those open fresh connections). The post-kill wait is now bounded (2 s): on timeout the stream abandons the zombie — the orphan janitor's /proc scan reaps it on its next pass — and proceeds to its normal reconnect, so live view recovers by itself. The same unbounded wait hid in two more places, both bounded too: the camera *Stop* endpoint (which would hang the very request a user makes to recover a stuck stream) and the periodic orphan-cleanup janitor itself (which is the safety net that recovers stalled streams, and so can least afford to block).
- **Queue edit showed the sliced-for model as the scheduler target, and a cross-model queue row could dispatch G-code to an incompatible printer (#2578, reporter @Jostxxl)** — Two bugs with one root. The "Any \<model\>" assignment button labeled itself from the file's slice metadata while the scheduler actually used the row's `target_model`, so an X1C-sliced item targeting H2D read "Any X1C" above "Scheduler will assign to first available idle H2D printer". Worse, the mismatch could be *created* silently: the sliced-for model loads asynchronously, and clicking "Any Model" before it arrived pre-selected the first model alphabetically — on a mixed X1C/P1S/H2D farm that's H2D — after which the model dropdown hid itself, leaving no way to see or fix the wrong target. Nothing downstream checked compatibility, so the scheduler would happily hand X1C G-code to an H2D. Now: the target model is never silently defaulted (the dropdown stays visible in model mode, pre-selected to the sliced-for model when available, and back-fills once the metadata loads); the button reflects the actual target; a warning shows when the target differs from the sliced-for model. Compatibility is enforced end-to-end with an explicit G-code interchange family table (X1/X1C/X1E/P1P/P1S interchange; everything else exact-match — files without slice metadata are never blocked): incompatible models are disabled in the dropdown, queue create/update reject a mismatch with a clear 400 (so API-created rows can't sneak in), and the scheduler holds back pre-existing mismatched rows with an actionable waiting reason instead of dispatching them — fix the target via edit and the job flows again.
- **Manual jog could drive an axis past its travel limit into a collision (#2579, reporter @R3play210)** — Jog the bed up from Bambuddy and, instead of stopping at the travel limit, it keeps going until the nozzle hits the plate; X/Y overrun too, on every model. Instrumenting the exact bytes sent to an H2D showed Bambuddy issuing a clean, correct move at the limit — `G91` / `G1 Z-1.00 F600` / `G90`, no endstop manipulation — that the printer executed straight past the stop, while the machine's **own touchscreen refuses the identical motion**. **This is a Bambu firmware bug: the firmware does not enforce its soft endstops on G-code received over MQTT** (the path every remote tool, Bambuddy included, must use), and it reports no axis position, so Bambuddy cannot know where the bed is to stop it either. It is not fixable from our side. Two things change here: (1) the jog no longer wraps moves in `M211 S0`/`S1` — the old code disabled the firmware's soft endstops *globally* around every jog, which also broke the **touchscreen's** limits until the printer was power-cycled; it now sends a bare move and never touches `M211`, so the touchscreen stays protected. (2) The jog panel now shows a prominent warning that travel limits are **not** enforced during manual moves because of this firmware bug, so nobody trusts the control to stop at the limit. Client-side travel-limit enforcement (dead-reckoning from a home) is tracked separately as the only real mitigation. If your printer currently overruns even from its touchscreen, power-cycle it once to restore the endstops an older Bambuddy build disabled.
- **External spool kept its old inventory filament after the type was changed on the printer (#2575, reporter @ajbastien)** — Assigning a new filament to the external spool (e.g. generic ABS in place of generic TPU) left the previous inventory spool assigned, so an ABS spool stayed mapped to TPU. The reconciliation that unlinks a stale external-spool assignment lives in `on_ams_change`, but that callback only fired on changes to the regular AMS units — its change-hash never included the external spool (`vt_tray`/`vir_slot`), and the external-spool data is stored after the AMS handler runs. External-spool identity changes (type, colour, tag, or a reset to empty) now re-trigger the callback so the stale assignment is unlinked; the fill-percentage (`remain`) is deliberately excluded from the fingerprint so a running print doesn't fire it on every push. Follow-up: the auto-unlink now also broadcasts `spool_assignment_changed` for each cleared slot — previously only the manual assign/unassign endpoints did, so an open browser kept rendering the now-unlinked spool on the slot until an unrelated refetch, which read as "the fix didn't work" even though the server state was already correct (reporter confirmed a browser refresh showed the right state all along).
- **Two or three users opening the UI at once exhausted the PostgreSQL connection pool immediately (#2572, reporter @Jostxxl)** — Even after the session-hygiene fixes below, the reporter's 93-printer farm saturated the pool the moment a couple of clients logged in together: the log filled with `QueuePool limit of size 10 overflow 20 reached, connection timed out` from `permission_checker` / `is_jti_revoked` / `is_auth_enabled`, and every one of the 30 stuck sessions was `idle in transaction` with the same last statement — the `auth_enabled` settings `SELECT`. Three things had regressed on `dev` after an earlier configurable-pool change was reverted and never re-landed (only the route-by-route session fixes were). **(a) The pool was back to a hard-coded, farm-hostile size.** PostgreSQL ran on `pool_size=10 + max_overflow=20` (30 connections total) with no way to raise it; the `DB_POOL_SIZE` / `DB_MAX_OVERFLOW` / `DB_POOL_TIMEOUT` / `DB_POOL_RECYCLE` env knobs and the `GET /api/v1/system/db-pool` gauge were gone. The PostgreSQL default is again `20 + 80` (100) with `pool_pre_ping` and a 1800s `pool_recycle`, all env-overridable, and `/system/db-pool` is back (it reports resolved config + live checked-out/checked-in/overflow without itself checking out a connection, so it stays truthful under saturation). SQLite is unchanged at `20 + 200`. **(b) Every protected request re-queried `auth_enabled` from the database.** That per-request round-trip — the exact `SELECT` seen on all 30 stuck sessions — is back to being cached for 30s. The cache is deliberately one-directional: only an *enabled* result is ever cached, so a stale read can only make a request *require* auth that a moment ago didn't — it can never skip a check that is now required (staleness fails closed). Toggling auth invalidates it immediately; the TTL is only a backstop for out-of-band changes. **(c) Every authenticated request checked out two pooled connections, not one.** The permission dependencies already hold a session, but the revoked-`jti` check opened a *second* `async_session` on top of it — so a burst of concurrent logins (the SPA fires many protected endpoints at once) needed twice the connections it should. `is_jti_revoked` now accepts and reuses the caller's session; the two token dependencies that check the jti before they have a session open were restructured to open one first, so each authenticated request makes a single checkout. Covered by tests for the dialect-aware pool sizing + env overrides, the pool-status shape, the True-only fail-closed cache (enabled cached, disabled/unconfigured never cached, DB error propagates), and the jti check reusing a provided session versus opening its own.
- **The file-manager, storage, camera-snapshot and timelapse routes still held a DB connection across their FTP/camera work (#2572, reporter @Jostxxl)** — After the earlier #2572 fixes the farm still bled connections over a long run — the pool crept from its normal ~14 to the full 300 across ~23 hours (with only ~20 of 93 printers powered on) and then threw `QueuePool limit … connection timed out`. These were the remaining routes of the same class: each took its printer row via `Depends(get_db)`, whose session stays open for the whole request, and then talked FTP to the printer — a listing, a multi-MB download, a delete, a storage probe — with a browser polling the cover/snapshot tiles for every card, offline ones included, and 73 unreachable printers each burning a full FTP timeout. The printer-files endpoints (`/files`, `/files/download`, `/files/gcode`, `/files/plates`, `/files/plate-thumbnail`, `/files/download-zip`, `DELETE /files`, `/storage`), the camera **snapshot** endpoint (sibling of the already-fixed stream), and the timelapse **scan** and **select** endpoints now read what they need in a short session, release the connection *before* the FTP/camera work (`expire_on_commit=False` keeps the loaded `printer.*` columns readable), and — for timelapse, which also writes — re-open a fresh short session only to attach the downloaded file. Behaviour is unchanged; the timelapse-scan boundary is pinned by a regression test that mocks the FTP listing/download and asserts both the detached-row reads and that the attach persists through the fresh session. Completes the route-by-route half of the #2572 effort (camera stream, cover, on_print_start, timelapse scan, finish photo, notification snapshots).
- **Four async FTP helpers had no overall timeout, so a saturated FTP thread-pool could pin a caller — and any DB connection it held — indefinitely (#2572, reporter @Jostxxl)** — FTP runs in a fixed 48-worker thread pool. `download_file_try_paths_async`, `download_file_bytes_async`, `get_storage_info_async` and `delete_file_async` wrapped their worker in a bare `run_in_executor` with no `asyncio.wait_for` (unlike `list_files_async`/`download_file_async`, which already had one). The per-socket timeout only bounds a worker once it *starts*; it does nothing for the time a call spends **queued** waiting for a free worker. On a farm where offline printers keep every worker parked on dead connects, that queue wait is unbounded — so an awaiting coroutine, and any pooled DB connection it was still holding, could wait forever. All four now cap the whole operation with `asyncio.wait_for` (returning the same failure sentinel on expiry, the orphaned worker's result discarded), so a backed-up FTP pool can no longer pin a caller — defence-in-depth beneath the route fixes above.
- **A wedged SMTP server could freeze the entire event loop during an email notification (#2572, reporter @Jostxxl)** — `_send_email` ran `smtplib` **synchronously on the event loop** and constructed the connection with **no timeout** (smtplib then falls back to the global socket timeout, which the app never sets). A relay that accepts the TCP connection but stalls on the greeting/login/DATA left the send blocked forever — and because it ran inline, it stalled every other coroutine with it. The send now runs off the loop (`asyncio.to_thread`) with an explicit 30s connect timeout, and `quit()` moved into a `finally` so a mid-send error can't leak the socket. Latent bug surfaced while auditing #2572; it presents as a stall/latency spike rather than the pool leak, but the same "blocking I/O on the loop" family.
- **The API didn't start serving for ~100 seconds on a large farm while it connected to printers one at a time (#2572, reporter @Jostxxl)** — On the reporter's 93-printer farm port 8000 didn't respond until roughly 100 seconds after the service started. The cause was in the FastAPI lifespan: `init_printer_connections` looped over every active printer and `await`ed each connection *serially*, and each `connect_printer` ends in a fixed one-second settle wait. The MQTT connect itself is non-blocking — `BambuMQTTClient.connect()` only calls `connect_async()` + `loop_start()`, so the handshake runs on a background thread — which means that one-second wait, times the fleet size, was pure serial dead air that the lifespan blocked on *before* the ASGI server began accepting requests. The connections are now started concurrently with `asyncio.gather`, so the whole step takes about a second regardless of how many printers you run, and the dashboard is reachable almost immediately. Each connection's result is also isolated (`return_exceptions=True`): a single unreachable printer no longer aborts the rest — or, as the old un-guarded serial `await` allowed, the entire startup. The MQTT clients still connect in the background exactly as before; only the startup wait is parallelized.
- **The print-start handler held a DB connection open across plate detection and the 3MF download (#2572, reporter @Jostxxl)** — After farm-testing the first round of #2572 fixes the reporter still saw `idle in transaction` sessions lasting minutes, and traced one to `on_print_start`: its last statement was `SELECT print_archives…`, immediately followed in the log by the printer's own `on_print_start` → `Trying filenames` → FTP work. The handler opened a single database session at the top and held it to the very end of the function — across two slow I/O blocks that need no database: the optional plate-detection camera capture (a 2.5s chamber-light settle plus an FTP/RTSP grab) and, on the new-archive path, the 3MF FTP download itself (up to five remote paths per candidate filename, each with retry/backoff — the code's own comments cite worst cases of tens of minutes under FTP contention). So one pooled connection sat idle-in-transaction for the whole of both, once per starting print, and print starts cluster on a farm. The connection is now released at both boundaries: reaching either point, only read `SELECT`s have run on that path (every write branch returns earlier), so a commit persists nothing and simply ends the read transaction, returning the connection to the pool for the duration of the I/O; the next query re-acquires a fresh one, and `expire_on_commit=False` keeps the already-loaded `printer.*` columns readable with no lazy load. Behaviour is unchanged. Continues the #2572 effort (camera stream, timelapse scan, finish photo, notification snapshots) to stop holding sessions across slow I/O.
- **The printer-cover endpoint held a DB connection open across the FTP thumbnail download (#2572, reporter @Jostxxl)** — The reporter's second correlation: a transaction whose last statement was `SELECT printers…`, matched in the log to the cover route (`Cover: resolved plate …` / `Trying to download cover … (trying 4 paths)`), still open more than three and a half minutes later. `GET /printers/{id}/cover` took its printer row via `Depends(get_db)`, and `get_db` is a `yield` dependency — its session stays open for the whole request, including the cover's 3MF download (up to eight remote paths × retries with backoff, minutes under the same single-FTP-socket contention that produces the 425s). The session was used for exactly one `SELECT`; everything after reads already-loaded `printer.*` scalars, `printer_manager`, and FTP/zip — no database. The endpoint now fetches the printer in a short-lived session and releases the connection *before* the download (`expire_on_commit=False` keeps the columns readable), mirroring the camera-stream fix. Pinned by a regression test that fails if a `get_db`-held session is ever re-added to the route.
- **Queue polling re-parsed every 3MF from scratch on each poll (#2573, reporter @Jostxxl)** — The Queue page polls `GET /api/v1/queue/` every few seconds, and for each item with a `plate_id` the serializer called three separate helpers — `extract_print_time_from_3mf`, `extract_filament_usage_from_3mf`, `extract_bed_type_from_3mf` — each of which independently opened the item's ZIP and re-parsed `Metadata/slice_info.config`. With 22 queued items that is 66 ZIP-open + XML-parse operations per poll, run in the event-loop thread, repeated for *every* connected browser even though the files never changed. The three values now come from a single combined parse (`extract_plate_metadata_from_3mf`) cached by file revision — the key is `(path, plate_id, mtime_ns, size)`, so an unchanged file is parsed at most once and a replaced or edited file transparently re-parses with no manual invalidation. The three legacy helpers still exist (other callers use them) but now delegate to the same cached parse, so usage-tracking and Spoolman paths benefit too; the queue hot path calls the combined helper once per row. The cache is a bounded (512-entry) LRU guarded by a lock so it stays small and is safe from worker threads. Listing an unchanged queue now serializes DB data and does no repeat 3MF parsing. (The reporter's broader farm-scale asks — a WebSocket-delta queue, an initial snapshot endpoint, ETag/304 support, per-row plate-request batching — are a separate queue-page redesign, not part of this fix.)
- **Progress-milestone and HMS-error notifications held a DB connection across the camera snapshot (#2572, reporter @Jostxxl)** — Both notification paths inside `on_printer_status_change` (the 25/50/75% milestone push and the new-HMS-error push) opened a database session, then captured a camera snapshot for the notification image — an up-to-15s RTSP grab — and sent the notification, all with the session held. So a pooled connection sat idle for the whole grab, per milestone/error, per printer; on a farm those fire constantly. The snapshot needs no database, so it now runs between two short sessions: one to read the printer name, then the grab with no connection held, then a fresh session for the notification send. Behaviour is unchanged; pinned by a test that fails if the snapshot ever runs while a session is open. The AMS-change notification path was left as-is for now (it holds a per-printer lock across its write and needs separate care). Continues the #2572 effort (camera stream, timelapse scan, finish photo).
- **Finish-photo capture held a DB connection open across the whole camera grab (#2572, reporter @Jostxxl)** — When a print finishes, the background finish-photo task reads a couple of rows (the capture setting, the printer, the archive) and then runs a capture pipeline that can take tens of seconds — timelapse last-frame extraction, waiting up to 20s for the stage-22 producer, an external-camera HTTP grab, or a fresh RTSP shot. It held one database session open across that entire pipeline, so a pooled connection sat `idle in transaction` for the full capture, once per finishing print — and finishes cluster on a farm. It now reads what it needs in a short session, releases the connection, runs the capture with no session held, and re-opens a fresh short session only to append the photo to the archive. Behaviour is unchanged. Continues the #2572 effort (camera stream, timelapse scan) to stop holding sessions across slow I/O.
- **Timelapse scan held a DB connection open across every FTP round-trip (#2572, reporter @Jostxxl)** — After a print completes, `_scan_for_timelapse_with_retries` polls the printer's FTP server for the new timelapse file (up to 4 retry attempts, plus a name-match fallback). Each attempt opened one database session and held it across the FTP directory listing *and* the multi-MB video download — so a pooled connection sat `idle in transaction` for the whole transfer, once per attempt, per completed print. When several prints finish together on a farm that adds up. The scan now reads the archive + printer in a short session, releases the connection, does the FTP list/download with no session held, and re-opens a fresh short session only to attach the downloaded file. Behaviour is unchanged; the existing scan tests already exercise the read→download→attach path. Continues the #2572 effort (after the camera-stream fix) to stop holding sessions across slow I/O; the scheduler paths were reviewed and found already bounded (single loop + capped concurrent uploads, with an explicit pre-dispatch commit) so they were left as-is.
- **Live camera stream held a database connection open for its entire duration (#2572, reporter @Jostxxl)** — The `/camera/stream` MJPEG endpoint took its printer row via `Depends(get_db)`, but `get_db` is a `yield` dependency: its session isn't released until the response body finishes streaming, which for a live stream is however long the browser tab stays open — minutes to hours. On a large farm every open camera tile therefore pinned one pooled DB connection `idle in transaction`, so a wall of dashboards could drain the pool on its own (a top contributor to the exhaustion in #2572). The endpoint now fetches the printer in a short-lived session and releases the connection *before* it starts streaming (`expire_on_commit=False` keeps the already-loaded columns readable). Pinned by a regression test that fails if a `get_db`-held session is ever re-added to the route. Part of the broader effort to stop holding sessions across slow MQTT/FTP/camera/3MF work.
- **PostgreSQL connection-pool exhaustion on large printer farms (#2572, reporter @Jostxxl)** — On a ~93-printer farm the SQLAlchemy pool (hard-coded `pool_size=10` + `max_overflow=20` = 30 connections) was repeatedly saturated with all connections `idle in transaction`; unrelated API requests then waited out the 30-second pool timeout or failed in the auth middleware, and an unauthenticated `/api/v1/printers` probe took ~25s to return 401. Three things fed the pressure: the pool was fixed and not configurable; every authenticated request re-queried `auth_enabled` from the DB (the middleware alone opened a session per request just to probe it); and the pool was small for a farm. This change (a) makes pool sizing configurable via `DB_POOL_SIZE` / `DB_MAX_OVERFLOW` / `DB_POOL_TIMEOUT` / `DB_POOL_RECYCLE` env vars and raises the PostgreSQL default to `20` + `80` (100 total) with `pool_pre_ping` and a 1800s `pool_recycle`; (b) caches the `auth_enabled` probe for 30s — only the *enabled* result is ever cached, so a stale read can only ever fail closed (require auth), never open, and any toggle invalidates it immediately; and (c) adds a `GET /api/v1/system/db-pool` diagnostic exposing the resolved config plus live `checked_out` / `checked_in` / `overflow` gauges (read without checking out a connection, so it stays truthful under saturation). Note: connections being held across slow MQTT/FTP/camera/3MF work — the underlying reason transactions sit idle — is a deeper session-hygiene change tracked separately; this drop relieves and instruments the problem and makes the farm sizing configurable. See the PostgreSQL wiki page for large-farm tuning and the required `max_connections` headroom.
- **P1S camera still black on every page load, recovering only after ~20 minutes (#2521, reporter @nnimby848)** — The previous round of fixes did not take, and the reporter re-tested on two daily builds to say so. The fan-out barrier added last time — a replacement stream waits for the displaced one's socket to close before dialling, so a printer that allows a single camera connection never sees two at once — was correct, and was being **bypassed**. `shutdown_broadcaster()` *popped* the broadcaster out of the registry and only then awaited its teardown, so for the duration of the socket close the registry slot sat empty. A `/camera/stream` request landing in that window found nothing, minted a broadcaster with no predecessor to wait for, and dialled port 6000 immediately. The barrier only engages when the displaced broadcaster is still findable — and the one path that tears a stream down on purpose removed it first, disabling the barrier in exactly the case it was written for. A page reload fires `/camera/stop` and the new `/camera/stream` **concurrently**, which is why it reproduced on essentially every load. The printer then held two connections, kept feeding the orphan, and starved the live viewer: the new socket connects (the reporter's logs show `Chamber image: connected`) and then receives nothing until the printer's TCP keepalive reaps the dead one — **his 20 minutes, to the minute**. The stopped broadcaster now stays in the registry so the next viewer chains behind its socket close, which is what the barrier always intended. Pinned by a test that counts *actual* sockets through the real stop-then-restream race and fails with `2` against the old code; the existing barrier tests placed the broadcaster into the registry by hand, which is precisely why they never caught this.
- **Every camera page load attached two viewers and abandoned one (#2521)** — Found while reproducing the above, and the reason it fired on *every* load rather than occasionally. The stream-token query runs whether or not authentication is enabled, and the camera page subscribes to it: the first render produced an `<img src>` with no token, the token arrived, and the re-render **changed the src**. The browser aborts the in-flight request and issues a second one — and with auth disabled no token is required, so *both* reached the backend and attached to the fan-out. The reporter's HAR shows it exactly: two requests to the same stream URL, same cache-buster, one without `token=` and one with. His backend log shows the consequence, `subscribers=2`, on a printer that allows one connection. The src is now rendered only once the token query has settled — one URL, one request, one viewer — and an auth-disabled install whose token endpoint fails still streams, because it never needed a token.
- **A viewer that left during a black stream stayed counted for 30 seconds (#2521)** — Also found on the way. A subscriber only checked whether its client was still connected *after* it had yielded a frame, or when a 30-second idle timeout fired. So a browser that walked away while the stream was producing nothing — the exact situation above — went on being counted as an attached viewer for up to half a minute. That matters beyond tidiness: `/camera/stop` consults the subscriber count to decide whether to tear the upstream down, so a phantom viewer could make it skip the teardown entirely and leave the socket open. Disconnects are now noticed within a second even when no frames are flowing.
- **"Please login." when importing from MakerWorld — while Bambuddy said you were connected to Bambu Cloud** — An expired Bambu Cloud token was indistinguishable from a working one, so the UI reported "Connected as ..." indefinitely while every cloud call was being rejected. The toast you got was Bambu Lab's own words, forwarded verbatim: their 401 body is `{"code":4,"error":"Please login.","message":""}`, and we passed the `error` field straight through — which read as Bambuddy telling you to log in, next to an indicator saying you already were. **The status was never real.** `set_token()` stamped `token_expiry = now + 30 days` *every time a stored token was loaded from the database* — re-derived from the current moment, for a token of entirely unknown age — and `is_authenticated` was "we have a string, and we're not past that expiry". The expiry reset on every request, so the check could never fail. It was a string-presence test wearing an expiry costume, and `/cloud/status` answered `true` for as long as any token existed. Bambu's access token is opaque (no readable claims), Bambu's login response carries no expiry, and Bambuddy discards the `refreshToken` it is handed, so nothing else in the system knew either. When a token lapsed — Bambu's own comment in our code says they last around three months — **every** cloud feature died at once (MakerWorld imports, cloud profiles, slicer presets, firmware checks) with no signal anywhere that a re-login was needed. **Bambu is now the authority.** No expiry is invented. `/cloud/status` asks Bambu whether the token is still accepted, cached for five minutes so the several components polling it don't each pay a round-trip, and any 401 from any authenticated cloud call durably records the credential as dead — so the whole app agrees at once instead of each feature failing separately. An unreachable Bambu, a 5xx, or a Cloudflare challenge is treated as *unknown*, never as *expired*: an outage must not sign a working session out. The Profiles page now explains why the login form is back, MakerWorld says the sign-in expired rather than that one is required, and its import buttons stop pretending they can download. The user-facing message names the **Profiles** page, where the Bambu Cloud sign-in actually lives — the old fallback text pointed at "Settings → Bambu Cloud", which does not exist.
- **Importing from MakerWorld failed on Windows with a certificate error (#2562)** — Paste a MakerWorld URL, click Save, and the import dies with `S3 download failed: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate`. Only native Windows installs are affected; Docker never sees it. The import walks several hosts, and the failure is at the last hop: Bambu Cloud answers the download request with an **AWS presigned URL**, and that one URL is fetched with `urllib` rather than httpx, on purpose — S3 signs the exact query-string bytes, and httpx re-encodes them into a `SignatureDoesNotMatch`. What that swap quietly also changed was the **trust store**. httpx — every other network call in Bambuddy, including the `api.bambulab.com` calls that succeed immediately before this one — verifies against the bundled `certifi` CA bundle. `urllib` verifies against the *operating system's* store, and on Windows the two disagree: Python's `ssl.load_default_certs()` only enumerates the roots already cached in the Windows ROOT store, which Windows fills in lazily through CryptoAPI's auto-update — a mechanism Python never triggers. On a machine where the Amazon root signing the S3 chain has not been cached yet, verification fails with exactly the error above. Linux images ship a complete `ca-certificates` bundle, so the OS store and certifi agree and the bug is invisible there. The S3 hop now verifies against certifi too, so it trusts precisely what the rest of the app already trusts. Verification itself is untouched — the certificate is still checked and the hostname still matched; the fix changes where the CA list comes from, not whether TLS is enforced. The URL still reaches the transport byte-for-byte, so the S3 signature is unaffected, and the no-redirect guard that keeps the download-host allowlist meaningful is unchanged. `certifi` is now an explicit requirement rather than one inherited from httpx, so a future httpx release cannot drop it out from under this import.
- **Prints on a multi-printer farm started one by one, up to an hour apart (#2555, reporter @Maxtrim3D)** — Start a batch across several printers and they trickle out one at a time; the more printers, the worse it gets. Not a misconfiguration, and nothing in the wiki could have helped: the scheduler awaited each dispatch inline in its selection loop, and a dispatch includes the FTP upload. So every printer queued behind every other printer's transfer, even though they are entirely independent machines. **The arithmetic is the whole bug report.** A Bambu printer's FTP server sustains around 150 KB/s — its own SD-card write is the bottleneck, not the network — so the reporter's 41 MB `.3mf` took **254 seconds per printer**, straight from his logs (`40978500 bytes in 254.1s, 157 KB/s`). Nineteen printers in series is roughly **80 minutes** before the last one starts, which is exactly the "up to 1 hour" he reported, and exactly why it got worse the more printers he selected — the delay is linear in fleet size. The logs show the next upload beginning **131 ms** after the previous one finished, back to back, forever. **Uploads to different printers now run concurrently**, capped by a new **Settings → Workflow → Queue & Dispatch → Concurrent Uploads** value (default 4, up to 16; set it to 1 for the old strictly-serial behaviour if your network or host cannot take parallel transfers). Selection is unchanged and still sequential — only the transfers overlap — so every existing gate (busy printers, plate-clear, filament deficit, shortest-job-first, staggered start) behaves exactly as before, and a queue pass still finishes all of its uploads before the next one begins, which is what stops the same still-`pending` row being dispatched twice. FTP work also moves off asyncio's shared default executor onto its own pool: that executor is sized `min(32, cpu_count + 4)` — six threads on a 2-core NAS — and is shared with everything else in the app, so parallel uploads would have parked one thread each, for minutes at a time, and starved unrelated work.
- **A printer that accepted a file but never started printing was retried forever (#2555)** — Surfaced by the same reporter: "I have a printer who, since the morning, still not launch." When a printer takes the file (its `subtask_id` advances) but never actually begins, the start-watchdog waits 270 seconds, reverts the queue item to `pending`, and the next pass re-uploads the entire file and waits it out again — with **no attempt limit**. For a genuinely wedged printer that loop never terminates, and on a farm each lap also consumes an upload slot the other printers are queueing for, so one stuck machine dragged out everybody else's start times. Retrying is right; retrying forever is not. Attempts are now counted on the queue item: the transient causes the watchdog already recovers from (a publish lost on a half-broken MQTT session is fixed by the forced reconnect on the very next try) still get their retries, but after **three** the item is failed with a message pointing at the printer — check its screen for a prompt or error, and check the SD card — rather than being handed back to the queue a fourth time.
- **A queued library print with no readable print time crashed the dispatch — and took the rest of that queue pass down with it (#2555)** — Found while reviewing the above. Starting a print from a library file read `library_file.print_time_seconds`, a column `LibraryFile` does not have (its print time lives in the file's parsed metadata). It only fired when the archive carried no print time of its own — a plain `.gcode`, or a 3MF the parser could not read — and it fired *after* the job had already been sent to the printer, so the print itself ran but the "print started" notification was lost. Worse, the error unwound the whole queue pass: every other printer still waiting to be dispatched on that tick silently missed its turn and had to wait for the next one. It now uses the print time the queue item already caches. The concurrent-dispatch change above independently contains this class of failure — one printer's dispatch blowing up can no longer cancel its siblings' in-flight uploads.
- **A print mapped to a different filament than it was sliced for was logged under the sliced material, not the one actually used (#2563, reporter @alexfilimon)** — Slice a model for **Bambu PLA Basic**, open Filament Mapping in the Print dialog, and — because no PLA was loaded — hand-pick the only loaded **PETG** slot. The printer prints from PETG, the PETG spool is correctly debited, but the Archive card, the Print Log and the material statistics all still call the run **PLA**. So "filament used", the one label that should describe what left the spool, described what the slicer asked for instead. The archive's `filament_type` is stamped once from the 3MF at creation and never revisited; the Print Log copies it verbatim at completion and the stats group on it. The material Bambuddy actually consumed was known all along — usage tracking resolves every used slot to the spool that fed it and already carries that spool's `material` — it just wasn't being written back. This is the exact problem that was solved for filament **colour** a while ago (#1494): once usage tracking has matched every used slot to an inventory spool, the spool's curated colour replaces the slicer's, so an archive printed from a `#000000` spool stops showing the slicer's near-black. Material now does the same. When every slot with non-zero usage resolves to a spool that declares a material, the archive's `filament_type` is rewritten from those spools — slot-ordered, de-duplicated, comma-joined exactly like the colour and the original type — and because that rewrite is committed before the Print Log entry is written, the corrected material flows through to the archive card, the Print Log and the stats with no further work. **All-or-nothing, deliberately**, mirroring the colour path: if even one used slot can't be resolved to a spool with a material, nothing is rewritten, so a partial match can never drop a slot's type from the archive or the material graph. A run whose mapping matched the slice is a no-op (the rewrite equals what's already there). **Both inventory backends, same drop.** The built-in Spool inventory does it from the matched spools' `material`; Spoolman does it from the resolved Spoolman spool's `filament.material`, captured at the same point the spool is already fetched for its colour, so no extra Spoolman round-trips. The remain%-delta fallback (no-3MF "Untitled" prints) intentionally sits it out in both backends, exactly as it does for colour — those prints have no 3MF slot to attribute a material to. **Tests.** 7 on the internal helper (the reporter's PLA-slice-to-PETG-spool case; slot-ordered de-dup across a multi-material print; the all-or-nothing gate leaving a partially-matched print untouched; a zero-usage slot needing no spool; no-used-slots and slot_id-less fallback results both declining to rewrite; a blank material not counting as a match). 3 on the Spoolman archive rewrite against a real DB session (a PETG spool overwrites a PLA slice; a partial match leaves `PLA,PLA` untouched; an empty material map is a no-op). Existing usage-tracker and Spoolman suites unchanged and green.
- **Every job on a busy farm waited up to 30 seconds after a printer freed up before it was sent (#2555, reporter @Maxtrim3D)** — With the parallel-upload fix in, the reporter still saw prints take "several long minutes" to leave the queue, sometimes going out together and sometimes in dribs. The scheduler's main loop did its work and then slept a **fixed 30 seconds** before looking again, unconditionally. That interval is dead air: a printer that finished a job one second after a pass ended sat idle for the next 29 before its follow-on print was even considered, and a batch fanning out across a fleet — where printers free up a few seconds apart as their current jobs end — dispatched in 30-second steps regardless of how fast the machines were actually becoming available. On nineteen printers that is minutes of nobody-is-uploading time stacked on top of the transfers. The loop now **re-checks within a few seconds whenever the previous pass actually dispatched something**, and only falls back to the 30-second idle sleep when a pass sent nothing. So a draining batch keeps moving at the speed the printers free up, not at the speed of a fixed timer. This cannot become a busy-loop: the fast tick fires *only* after a productive pass, and a pass is productive only while there is ready work to send — the moment the remaining items are all behind printers that are genuinely busy printing (or behind a wedged head-of-line job holding its printer in the post-dispatch cooldown), the pass dispatches nothing and the loop reverts to the slow interval. Selection, the concurrency cap, and the finish-all-uploads-before-the-next-pass invariant are all untouched; only the gap between passes shrinks when shrinking it helps. **Tests.** 2 new cases: a pass that dispatches three items reports that it did (so the caller re-ticks fast), and an empty queue reports that it did not (so it sleeps normally). The existing concurrent-dispatch suite — parallel fan-out, the cap, the serial escape hatch, one-failure-doesn't-cancel-siblings, and the uploads-finish-before-return invariant — passes unchanged against the new return value.
- **Debug logging was unusable on a large fleet, and the support bundle only shipped a fraction of what was on disk (#2555)** — We asked the reporter to turn on debug logging and send a support bundle. The bundle came back holding **4 minutes 49 seconds** of history — barely one upload — for a problem that takes an hour to unfold. Two causes, both fixed. The state dumps in the MQTT push_status handler fired whenever their field was *present* in a frame, and a full frame carries every field, so they fired on **every frame** regardless of whether anything had changed; several said "updated" or "when X changes" in their own comment while doing nothing of the sort. On one printer that is ~1.5 lines/s and invisible. On nineteen it is ~100 lines/s: **27,727 of the bundle's 29,830 lines** were these dumps, and they rolled the 5 MB log over in under five minutes. They now log transitions only — every change is still recorded, the steady-state repetition is not. Separately, the bundle shipped only the live `bambuddy.log` and ignored the three rotated backups sitting next to it, even though its own byte budget was four times larger than the file it was reading; it now spans the rotation, oldest first, spending the budget on the most recent history.
- **Filament Override vanished for a multi-plate selection in Any [model] mode — but only on the second visit (#2552, reporter @bondjw07)** — Open a sliced multi-plate `.gcode.3mf`, pick **Any [model]**, tick two plates, and the whole Filament Override section is gone. Tick one plate and it comes back. The reporter tied it to having queued or printed the file before, which is the real clue, but not the cause: what actually mattered was that the dialog had been opened once already, so the plates data was still in the cache. The filament requirements are fetched under a key that carries the selected plate, and that key is `null` as soon as two plates are ticked. On the first open the plates are not yet known, so for one render the modal cannot tell it is a multi-plate file and fetches the requirements for the whole file — the union of every plate's filaments — which the override panel then rendered from. On the next open the plates are already cached, the modal knows it is multi-plate from the first render, the whole-file fetch therefore never happens, and the panel had nothing to render. So the section's visibility was decided by a cache race, and the case that "worked" was showing you filaments from plates you had not selected. **Both halves are now wrong-free**: a multi-plate selection in model mode renders one **Filament Override — Plate N** panel per selected plate, each fetched for that plate and listing only the slots that plate actually prints, identical on a cold and a warm cache. A slot's chosen filament and its Force color match tick are shared across plates that print that slot — slot ids are global to the file, so slot 3 is the same filament wherever it appears — and each queued plate is sent only the overrides for its own slots, so a colour forced for plate 2 no longer holds plate 1 back (the API narrows them per plate as of #2551, and the modal no longer sends them wide in the first place). Measured on the old code: warm cache, two plates → zero override panels; cold cache → one panel listing both plates' filaments. Now: two panels, one slot each, either way. **Four further holes in the same per-plate machinery closed while reviewing it**: a manual tray pick on one plate survived a change of printer, and a global tray id names a different spool on a different machine — so the job went out on a tray nobody chose; a plate whose filaments could not be read (or had simply not loaded yet) was indistinguishable from a plate needing none, and was queued with no mapping and no forced colours, to print in whatever happened to be loaded — the Print button now waits for every selected plate to answer and says which one could not be read; the "not enough filament left" check still weighed the whole file's filaments against a mapping the plates no longer use, so it either failed to warn at all or warned about trays the print would not touch — it now follows what each plate actually dispatches, and sums the demand per tray, because 60 g left does not cover two plates of 40 g even though it covers either one of them; and the per-printer tray editor still appeared for a multi-plate fan-out, collecting tray choices that were then discarded.
- **Queueing several plates of one file mapped them all through the first plate's filaments — and hid the panel that would have shown you (#2551, reporter @bondjw07)** — Select one plate and the Filament Mapping panel appears; select a second and it vanishes, and in **Any [model]** mode it never appears at all. Both were deliberate, and one of them was covering a wrong-tray dispatch. **Why the panel hid.** It maps one set of 3MF slots onto one printer's AMS trays, so it needed a single plate and a single printer; `selectedPlates.size <= 1` hid it the moment you ticked a second plate. In model mode there is no printer selected, so there are no trays to map onto — that one is legitimate, and the scheduler computes the mapping per plate when it picks the printer. **What the hidden panel was hiding.** The modal kept posting an `ams_mapping` anyway. With two plates selected the modal has no single plate to ask about, so it falls back to the whole file's filament list — the **union of every plate** — and matched against that. Tray assignment is stateful: a tray claimed by one slot is not offered to the next. So for a file where plate 1 prints red on slot 1 and plate 2 prints red on slot 2, slot 1 took the only red spool and slot 2 fell through to a type-only match on **black** — and that one mapping, `[red, black]`, was sent with *both* plates. The scheduler uses a stored mapping verbatim and only computes its own when the item has none, so plate 2 printed in the wrong colour, decided by a panel the user was never shown. Measured, not deduced: driving the old modal with a real cache posts `ams_mapping: [0, 1]` for both plates. (It reproduces only with a realistic React Query cache — the test harness's `gcTime: 0` evicts the union and makes the modal look innocent, which is why this hid for so long.) **Now each plate maps itself.** Select several plates on one printer and you get one mapping panel **per plate**, named after it, each showing and mapping only the slots its own plate prints, each with its own tray overrides — pin plate 2's red to a different spool and plate 1 is untouched. Each queue item carries its own plate's mapping. Fanning several plates across several printers would be a panel per plate per printer; those items are queued with **no** mapping instead, and the scheduler maps each plate against the printer it actually dispatches to, which it already does correctly. **One matcher, not three.** The tray-matching logic existed twice (once in the hook, once in `computeAmsMapping`) and this needed a third caller, so it is now extracted once and both paths delegate to it — the per-plate panel and the per-printer fan-out cannot drift apart. Its 62 existing tests pass against the extraction unchanged. **Tests.** 3 on the matcher, pinning the exact divergence: each plate alone maps to the red tray, the union starves the second slot onto black, and a manual override on one plate does not leak into another. 4 on the modal: one panel per selected plate; each plate posts the mapping for its own slots (`[0]` and `[-1, 0]`, not the union's `[0, 1]`); a multi-printer fan-out posts none; a model-assigned job posts none. Mutation-verified against a production-like cache — the per-plate test fails with exactly the old `[0, 1]`, and removing the multi-printer guard leaks printer 1's trays onto printer 2.
- **Queueing several plates of one file with Force color match made every plate wait for every colour (#2551, reporter @bondjw07)** — A sliced multi-plate `.gcode.3mf`, each plate a single different PLA colour, queued to **Any X1C** with **Force color match** on. A printer with Army Blue loaded and idle should take the Army Blue plate. Instead every plate sat at Waiting on `PLA (Army Blue), PLA (Ash Grey), PLA (Sunshine Yellow)` — the colours of *all* the plates. Queue the same plates one at a time and it works, which is the tell. **One override list, handed to every plate.** The print dialog only tracks a selected plate when exactly one is selected; pick several and it asks the backend for the filaments of the *whole file*, which is the union across all plates. It builds its override list from that union — correctly, because the user does need to tick each colour once — and then posts **that same list** with each plate's queue item. A `force_color_match` entry means "do not dispatch until this printer has this exact colour loaded", and the scheduler enforces *all* of them, so each single-colour plate demanded the whole batch's palette. The reporter's own guess in the issue was exactly right. **The API is what fixes it.** The overrides are now narrowed to the slots the item's plate actually prints, at write time, on both create and edit — the backend is where the 3MF is, so this holds for every writer of the queue and not just the one dialog. Nothing changes for a single-plate job or for a whole-file job, where the union *is* the requirement. **A second, quieter version of the same bug.** Override types are merged into the item's `required_filament_types`, which is the gate that runs *before* colours are even considered. A shared list therefore also widened that gate: queue a PLA plate and a PETG plate together and the PLA one would refuse every printer that didn't also have PETG loaded, with no mention of colour anywhere in the reason. Narrowing the overrides closes that too. **Fails strict, never silent.** When the plate's slots can't be established — corrupt 3MF, source file gone — the overrides are kept whole rather than dropped. An item waiting on a colour it doesn't need is visible and fixable in ten seconds; an item that silently lost its forced colour prints in the wrong filament. **The plates already in your queue are repaired on upgrade.** Fixing the write path alone would have left every item queued before this release sitting exactly where it is — stuck, with a waiting reason that explains nothing — until the user worked out for himself that deleting and re-adding them was the cure. A startup migration re-scopes the pending items instead. Items that are already printing or done are left untouched: their overrides are a record of what they dispatched with, not an instruction. **Tests.** 6 cases on the API (each of three plates keeps only its own colour and its own slot id; a whole-file job still keeps all three; an unreadable 3MF keeps all three; a PLA plate's required types stay PLA when a PETG plate is queued alongside it; editing an item narrows its overrides too; moving an item to another plate re-scopes it). 5 on the repair (three stuck items each come back to their own colour; a second boot is a no-op; a printing item is not rewritten; a whole-file item keeps all three; a missing source file strips nothing). Mutation-verified — six of the eleven fail against the old code. The migration was run against a real PostgreSQL 16 as well as SQLite, twice over, to confirm it is dialect-neutral and idempotent.
- **A project's tags vanished from the edit dialog when you opened it from the projects list — and its priority was quietly reset when you saved (#2536, reporter @fireboyff)** — Editing a project from the Projects list showed an empty tags field; opening the same project first and editing it from inside showed the tags correctly. **One dialog, two callers.** `ProjectModal` is shared: the detail page hands it a full project, the list hands it a list item. The list endpoint's payload never carried `tags`, `due_date` or `priority`, so from the list the dialog seeded those three fields from `undefined` and rendered them blank. It compiled because the component read them through a cast (`project as ProjectListItem & { tags?: string }`), which asserts a field the type does not have — so TypeScript never pointed out that the value was always missing. The fields are now on `ProjectListResponse` and on `ProjectListItem`, the casts are gone, and the compiler enforces the two shapes agreeing from here on. **The part nobody reported.** The dialog does not send tags when the field is empty, so the tags themselves survived — they were only invisible. Priority is not so lucky: it is *always* sent, defaulting to `normal`. So editing a **high** or **urgent** project from the list silently demoted it, and the reporter would have had no reason to connect that to the empty field he did see. Fixing the payload fixes both, since the dialog now receives the real priority to send back. **Clearing a tag list also never worked, from either view.** An emptied field was sent as `undefined`, which drops the key from the request, and the backend only applied values that were not null — so the old tags came straight back. Tags and due date now behave like budget and URL already did: sent as null, cleared explicitly, and an omitted key still means "leave it alone". **Tests.** 4 backend cases (the list and the template list both carry the fields the dialog renders; a partial update does not disturb a stored priority or tags; an explicit null clears tags and due date) — mutation-verified, three of them fail against the old payload. 3 frontend cases pin the dialog: it prefills all three from a list item, it round-trips a stored `high` instead of submitting its default, and clearing the tags field sends null. The templates list was missing `target_parts_count` too, which the same dialog edits; that is fixed in passing.
- **Scheduled backups to a NAS failed with "Read-only file system" — and our own systemd unit was the reason (#2544, reporter @pwostran)** — Nightly backups to a mounted NAS share had run since May and then stopped, failing every night with `[Errno 30] Read-only file system`. The reporter checked the folder permissions, which were correct: his mount is `gid=backup,dir_mode=0775`, the service user is in `backup`, and his own shell writes to the share fine. **Errno 30 is EROFS, and EROFS is not a permission error** — a permission problem is errno 13. EROFS means the filesystem itself refused the write, and the filesystem refused it because *we told it to*. Bambuddy's systemd unit ships `ProtectSystem=strict`, which mounts the entire filesystem read-only inside the service's own mount namespace and carves back out only `ReadWritePaths=<install> <data> <logs>`. A NAS share is not one of those three. Reads still work — which is why the UI happily listed his existing backups from the share while being unable to create a new one — and the operator's shell is outside the namespace entirely, so every check he could think to run said the directory was fine. **How a working install broke.** Both installers write `/etc/systemd/system/bambuddy.service` wholesale, so any `ReadWritePaths` an operator had added by hand disappeared on the next install, along with their backups. That is now fixed at the source: the installers back the old unit up (`.bak-<timestamp>`) and **carry the operator's extra writable paths forward** into the new one, reporting which ones they kept. The unit template also documents the carve-out, since the next person to read it has to be able to work out why a directory they can write to is read-only for the service. **The failure is no longer silent, or cryptic.** The output directory is now probed with a real write when you save it and when the backup card loads, so a directory Bambuddy cannot write to is caught there and then rather than at 03:00 for a week. When the probe fails, the card names the actual cause and hands over the exact fix with the operator's own path already in it — `sudo systemctl edit bambuddy` → `[Service]` → `ReadWritePaths=/mnt/nasbackup` — instead of quoting an errno. A failed backup run reports the same diagnosis rather than the raw OSError. EROFS outside systemd, permission-denied, out-of-space, not-a-directory and missing are told apart and worded accordingly, in all 11 locales. **A Docker trap caught on the way past.** A backup path inside the container that was never bind-mounted from the host is *writable* — the write lands in the container's ephemeral layer and vanishes on the next `compose up`. A backup that silently goes nowhere is the one failure mode a backup feature must not have, so the probe compares the directory's device against the container root and warns when they match, with the compose snippet that mounts it properly. **Tests.** 15 backend cases: EROFS under systemd is diagnosed as the sandbox and yields a copy-pasteable drop-in; EROFS *outside* systemd does not blame a unit that doesn't exist; EACCES stays a permission problem; the unit name is read from the cgroup (plain, templated, and the fallback when there's no `.service` in it); the probe leaves no file behind in the backup list; a container-layer path is flagged while a mounted volume is not; a failed run surfaces the diagnosis and not the errno; and four pin the installers, so a reinstall can never again drop a writable path or overwrite a unit without a backup. Verified against a real read-only mount, not a mocked one — the classifier was run against an actual `mount -o ro` tmpfs and returned the reporter's exact errno with the right remedy. 4 frontend cases on the banner.
- **Docker never shut down gracefully — every stop, restart and update was a SIGKILL** — `CMD ["sh", "-c", "uvicorn ..."]` left the shell as PID 1 with uvicorn as its child, and dash does not forward signals. So `docker stop` SIGTERMed the shell and **uvicorn never heard about it**. Measured on the shipped image: the stop ran the full 10-second grace period, the container exited **137** (SIGKILL), and the log contained no "Shutting down" line at all — it simply stopped dead after `Uvicorn running on ...`. That means the entire shutdown path had never once executed in Docker: no SQLite WAL checkpoint, no MQTT disconnect (the broker saw an ungraceful drop every time), no virtual-printer teardown, no printer disconnect, no `engine.dispose()`. Not "when a camera is streaming" — *always*, on every `docker stop`, `docker restart`, `compose down` and image update. The fix is one word: `CMD ["sh", "-c", "exec uvicorn ..."]`. With `exec`, uvicorn *is* PID 1 and receives the signal. Verified on a rebuilt image: PID 1 is now `uvicorn`, `docker stop` completes in **1 second** with **exit code 0**, and the log shows `Shutting down` → `WAL checkpoint completed` → `Application shutdown complete`.
- **`systemctl restart` could hang for 90 seconds and end in SIGKILL** — with a camera tile open, stopping Bambuddy would sit at `Waiting for connections to close.` until systemd gave up and killed it. Uvicorn's `timeout_graceful_shutdown` defaults to `None`, i.e. **wait forever** for in-flight requests, and an MJPEG camera stream is a response that never completes — `httptools`'s connection `shutdown()` only flips `keep_alive = False` on an in-flight cycle, it never closes the transport. So a single open stream pinned the process. Worse, the ordering is inverted: uvicorn only fires the **lifespan shutdown** — the code that would tear those streams down — *after* the connections drain, so the cleanup that would unblock the wait was itself blocked by the wait. Every launcher now passes `--timeout-graceful-shutdown 5`: the Dockerfile, the shipped `deploy/bambuddy.service`, the systemd unit and launchd plist emitted by `install/install.sh`, the SpoolBuddy installer's unit (a kiosk parked on the printers page holds exactly such a stream open, so this bit it on every reboot), and the Windows NSSM registration. On timeout uvicorn cancels the request tasks and the camera generators unwind cleanly on `CancelledError` — a path they already handled. `TimeoutStopSec` is raised to 30s on the systemd units as a backstop rather than the mechanism, and `stop_grace_period: 30s` added to the compose file so a slow teardown on a Pi isn't clipped. On Windows, NSSM's stop sequence was also force-killing uvicorn mid-teardown: its default `AppStopMethodConsole` is **1500 ms**, far less than uvicorn needs, so that is raised to 15s and the useless WM_CLOSE / thread-message stages (uvicorn is a console app with no window and no message loop) are skipped. **Tests.** 9 cases pinning every launcher — that the Dockerfile `exec`s, that each of the six launch points carries the timeout flag, that the systemd stop timeouts leave room for the teardown, and that NSSM waits long enough for the Ctrl-C. None of this shows up in a functional test: the app is perfectly healthy right up until you ask it to stop.
- **Energy Summary stuck at zero for Yesterday and Total on REST smart plugs — and the Statistics energy figure with it (#2539, reporter @R3play210)** — A Shelly Plug S Gen3 wired up over the REST integration showed live power and a Today figure that climbed, but Yesterday and Total never moved off zero, through five days of printing. **The bug.** `RESTSmartPlugService.get_energy()` returned a dict with two keys, `power` and `today`. It never set `yesterday` or `total` at all, so `SmartPlugEnergy` defaulted them to null and the summary card summed nothing. Tasmota returns all three; Home Assistant returns two; REST returned one. **The number that looked right was also wrong.** A Shelly has no notion of "today" — its only energy figure is `aenergy.total`, a lifetime counter in watt-hours that climbs forever and never resets. Bambuddy had a single energy field, so the reporter put the lifetime counter in it, and line 230 filed it under `today`. It *looked* correct because it grows; it just never dropped back to zero at midnight. The one figure he trusted was the least trustworthy of the four. **It broke more than the card.** With `total` never populated, the hourly snapshot recorder skipped the plug outright (its own comment said so: *"REST plugs that only expose today can't be used for cumulative snapshots"*), `_sum_live_plug_totals()` summed zero, and since the reporter's `energy_tracking_mode` is `total`, the **Statistics page's energy figure was zero too** — he simply hadn't got to it yet. **The fix.** A REST plug now says which counter it has: `rest_energy_path` still means "energy used today", and a new `rest_energy_total_path` means "lifetime counter that never resets". A Shelly has only the latter; a Tasmota behind a REST bridge has both; both are read from one HTTP fetch when they share a URL. Then, because the snapshot table already records that lifetime counter hourly, **Today and Yesterday are derived from it**: today = the counter now minus its value at the last local midnight, yesterday = that midnight's value minus the one before. So a Shelly gets all four numbers with no new device capability — and Home Assistant's permanently-null Yesterday is fixed for free. Today appears after the first midnight the install lives through, Yesterday after the second; a counter that goes backwards (factory reset zeroes `aenergy.total`) reports nothing rather than a negative. **Local midnight, not UTC.** With `TZ=Europe/Berlin` a UTC boundary would roll Today over at 02:00 wall-clock. The snapshot loop now ticks on the *local* hour instead of every 3600s from boot, so a reading lands exactly on the day boundary — including in the half-hour-offset zones (India, Nepal) where local midnight isn't on a UTC hour at all. Previously the last snapshot before midnight could be up to an hour early, and an hour of a printer's draw is real watt-hours to lose off the day. **Collateral: the whole smart-plug subsystem was broken on Postgres.** Every `DateTime` column in the smart-plug tables is naive and holds UTC, but the code wrote *aware* datetimes into them. SQLite tolerates that — its bind processor reads the fields and drops the offset — which is why it went unnoticed. asyncpg does not: it raises `DataError: invalid input for query argument`. So on Postgres every energy-snapshot capture raised (silently, inside the loop's `except`), leaving the snapshot table empty and the date-filtered energy stat permanently zero, and every plug status poll raised on `last_checked`. Postgres is what Bambuddy recommends for multi-printer installs, so this was not a corner. All smart-plug timestamps are now naive UTC via a shared `utcnow_naive()` / `to_naive_utc()`, and the snapshot-delta query normalises its bounds the same way. **Tests.** 8 cases on the derivation (today and yesterday from the counter; yesterday absent until two midnights have passed; nothing derivable before the first; a counter reset reports nothing rather than a negative; another plug's snapshots are not borrowed; a device-reported figure is never overwritten by our arithmetic). 4 on the REST driver, using the reporter's own `Switch.GetStatus` payload (the lifetime counter lands in `total` and *not* in `today`; a plug reporting both keeps them apart; a total path alone is enough to read energy at all; both counters share one HTTP fetch). 4 more pin the Postgres-unsafe datetime — mutation-verified: reintroducing the aware timestamp fails the guard. Migration applied and re-applied against a real Postgres to confirm it is idempotent and defaults to NULL. **Existing REST users:** if your Energy JSON Path points at a cumulative counter (anything from a Shelly does), move it to the new **Energy JSON Path (lifetime)** field — the form and the wiki now say which field wants which counter.

### Added
- **Russian (Русский) UI translation (#2608, contributor @pterodaktil02)** — Bambuddy's interface is now fully available in Russian, bringing the total to 11 languages. Pick it under Settings → General → Language. The translation covers the whole UI — printer controls and statuses, build plate and bed, filament, and AMS — with context-appropriate terminology throughout, and preserves every interpolation placeholder so counts, names, and progress values render correctly.
- **"Slice as designed" — keep a MakerWorld author's own settings when you slice server-side (#2611, reporter @kpp39)** — When you slice a project 3MF through Bambuddy, the SliceModal makes you pick a printer / process / filament triplet, and the slicer applies those with `--load-settings` — which *overrides* whatever the designer baked into the file's `Metadata/project_settings.config`. So a MakerWorld model set up for 5 walls came out at the picked profile's 2, and the reporter's own re-posted files lost their tweaks too. That override is correct for the flow's main job — re-slicing someone else's design for *your* printer and AMS, especially across models (an H2D design onto an X1C) *needs* the bed size and filaments swapped — but it left no way to say "just slice it the way the author set it up." **What's new.** When the source 3MF carries embedded settings **and** the picked printer matches the design's target model, the modal offers a **Use the file's built-in settings** checkbox. Tick it and Bambuddy slices with no `--load-settings` override, so the designer's walls / infill / filament choices drive the result; all four preset controls (printer, process, filament, bed type) grey out to show they're bypassed — the printer included, since it's unused on this path and changing it would only pull you off the design's target and hide the toggle again. **The printer-match gate is deliberate.** Honouring embedded settings only makes sense when your printer *is* the design's printer — applying them across models would drop the object on the wrong bed, which is the whole reason the profile path exists — so the toggle simply isn't offered otherwise, and there's no cross-printer re-targeting on this path. Filament comes from the file too, not your AMS picks; the hint says so. **Under the hood** this reuses the existing embedded-settings slice path (previously only a crash fallback) as a first-class, user-selectable mode; the response already flagged `used_embedded_settings`. **Not** in scope: merging a picked filament *over* the designer's other settings — that needs per-key precedence and is a separate future enhancement. **Scope.** One backend request flag + one branch, one gated frontend checkbox. No DB migration, no new permission, no new setting. Two new i18n keys (`slice.useEmbedded`, `slice.useEmbeddedHint`) translated in all 11 locales.
- **A paused AMS runout now names the physical slot the printer is actually waiting for (#2587, reporter @Jostxxl)** — When a spool runs out mid-print, Bambuddy showed the firmware's generic HMS text — "insert a new filament into the same AMS slot" — which is exactly wrong when AMS Filament Backup is on: the firmware won't re-accept the depleted slot and advances to the next compatible one, so "the same slot" sends the operator to the wrong place. On the reporter's farm this meant reinserting into Slot 2 (where it ran out) did nothing, and the print only resumed after moving the spool to Slot 3 — with no on-screen hint that Slot 3 was what the printer wanted. **Root cause.** The printer's AMS payload carries `tray_tar` (the slot the paused print now expects) and `tray_pre` (the slot that ran out) right next to `tray_now`, but Bambuddy parsed `tray_now` only and dropped the other two at ingest, so "which slot does the print expect" never reached the API or the UI. **What changed.** `tray_tar`/`tray_pre` are now captured on printer state and, while the print is **paused**, resolved to global tray IDs and surfaced on the status payload (both the REST poll and the live WebSocket push) as `expected_tray` / `previous_tray`. The AMS graphic highlights the expected slot with a pulsing amber ring (and a down-arrow badge) and marks the ran-out slot in red, and the HMS error is re-described to name them directly — e.g. "Filament ran out in AMS-A · Slot 2. The printer is now waiting for compatible filament in AMS-A · Slot 3. Insert a spool into AMS-A · Slot 3, then select Retry." **Honest when it can't tell.** On a single regular AMS the reported slot is already the global ID; on multi-AMS it's a local slot that's resolved against the print's snow-encoded mapping field, and AMS-HT IDs (128–135) pass through. When the slot can't be resolved unambiguously (multi-AMS with no usable mapping), the graphic highlights nothing and the message says so — "Bambuddy could not determine which slot the printer now expects — check the printer screen" — rather than pointing at a guess. User AMS friendly-names are honored in the labels. **Scope.** Guidance is populated only while paused, so a healthy print's normal target churn never highlights a slot or spams the log. Backend resolver, the ingest parse, and the modal re-description are covered by new unit/component tests; the runout copy is translated in all 11 locales.
- **The sponsor surfaces now ask a print farm a different question than they ask a hobbyist** — Since the in-app sponsor banner and milestone toast shipped in v0.2.4.8, both have made exactly one ask, to everyone: chip in a few dollars to keep Bambuddy independent. That ask works — new sponsorships went from 0.40/day to 1.40/day in the fifteen days after the release, and clicks through to GitHub Sponsors rose 4.3x on a *falling* web traffic base. But it is the wrong ask for part of the audience. Someone running twelve printers as a business does not want to donate $5; they want a support contract, an invoice, and somebody accountable when the line stops. They were being shown a donation button and, unsurprisingly, ignoring it. **What changed.** At **5 or more configured printers** the Settings → General banner and the milestone toast both make the commercial ask instead — priority support, commercial licensing, invoicing — and link to the new **bambuddy.cool/business.html** rather than the sponsor tiers. Below that, nothing changes at all. It is the same single interruption either way: same milestones, same 14-day cooldown, same one-toast-per-session guard. Only the ask changes, so nobody sees more nagging than before. **Configured printers, not active ones.** The count deliberately ignores `is_active`, which is the maintenance-mode flag rather than a fleet-size signal. A farm with eight machines and five of them on the bench for nozzle swaps is still a farm — filtering on `is_active` would have counted three, downgraded them to the hobbyist pitch, and done it precisely when they were having the worst day. **The page concedes the licence up front.** business.html opens by stating plainly that Bambuddy is AGPL-3.0, that running it inside your own business costs nothing, and that no licence is required no matter how many printers you have — because that is true, and a page that implied otherwise would be a lie the audience would catch immediately. What it then offers is the set of things a licence cannot give you: priority support with a named contact and agreed response times, commercial licensing for the narrow case where you actually need it (redistribution, OEM, shipping Bambuddy on an appliance), fleet deployment and custom development, and operator training. No price list — those conversations are scoped individually. **Attribution is preserved.** Both surfaces keep their existing Matomo `?from=` tags (`app-settings`, `app-toast-{milestone}`), so the business funnel is measurable from day one on the same dashboards as the personal one, and the split between the two is visible without any new instrumentation. **No telemetry was added**, and none is needed: fleet size is read from the printers list the app already has cached. **Scope.** Frontend only — no backend change, no schema change, no migration, no new permission, no new setting. The audience split is one shared helper (`utils/fleetAudience.ts`) so the threshold lives in exactly one place. **Tests.** 7 new cases: the boundary in both directions (4 printers → personal, 5 → business); the maintenance-mode trap (8 printers with 5 inactive still reads as business); the cold-cache race (the toast waits for the fleet to load rather than defaulting to zero printers and pitching a farm as a hobbyist); both banner variants including the assertion that the commercial copy *replaces* the donation copy rather than sitting beside it; and the `?from=` tag surviving on both paths. All 7 mutation-verified — forcing the threshold out of reach, or dropping the fleet-load gate, fails them. **i18n.** 4 new keys (`sponsors.toastBusiness`, `businessCta`, `businessTitle`, `businessTagline`) translated in all 11 locales; parity 5616 keys.
- **Cam Wall on its own URL, and on a TV that isn't logged in (#2531, reporter @cadtoolbox)** — The Cam Wall was reachable exactly one way: click the Cam wall button on the Printers page. It had no URL, so you couldn't bookmark it, link to it, or point a wall-mounted screen at it. It now lives at **`/camwall`**, and a button next to the Cards / Cam wall toggle opens it there. Signed in, that page is the same wall you already know — tiles clickable, settings popover working, the knobs shared with the Printers page through the same localStorage keys, so a change in one follows you to the other. **The TV case is the hard half.** A screen in a workshop has no login session, and a wall tile needs two things a camera token could not previously fetch: the list of printers, and each one's status for the state badge. Both sit behind `PRINTERS_READ`, so a kiosk got a 401 and an empty wall. The obvious fix — let the existing `camera_stream` token through to `GET /printers` — is the wrong one: that response carries every printer's `serial_number` and `ip_address` even in its non-secret shape, and a URL pinned to a lobby TV lives in the browser history, in the kiosk's config file, and on the screen itself. So the Cam Wall gets a **purpose-built read-only feed** at `GET /api/v1/camwall/printers` that serves only what a tile draws: id, name, camera rotation, connected, state, progress, layers, remaining time, HMS codes. No serial. No IP. No access code. **And no filename** — a token wall renders the compact overlay, so the field simply isn't served rather than being served and then hidden client-side; the part on the bed is never named to a room anyone can walk into. **A second scope, not a wider one.** The feed is gated on a new `camwall` token scope alongside `camera_stream`. A Cam Wall token reaches the video *and* the tile metadata; a camera-stream token reaches the video and is refused by the feed. That matters because `camera_stream` tokens are already in the wild, minted by people who agreed to hand out a picture — shipping this must not retroactively grant them the ability to enumerate a fleet by name. Pick the scope when you create the token in **Settings → API Keys → Camera API Tokens**; the create dialog then hands you the finished kiosk URL, fully assembled, so nobody has to build it from the docs. **What a token wall gives up.** No settings popover and no click-through: a TV has nobody standing at it, and click-through would open a page the token cannot authenticate. The controls are not merely hidden — they aren't rendered, so a kiosk carries no focusable control it cannot act on. The overlay is capped at `compact` even if the URL asks for `full`. The screen can still be tuned from the URL: `?maxLive=9&interval=10&status=compact`, all clamped to the same ranges the popover enforces. **Statuses are polled, not pushed** — the page renders outside the app layout and its WebSocket provider, and a kiosk token cannot mint a WS ticket anyway; a wall is watched, not operated, so a 5-second cadence costs nothing. **Revoking the token cuts the display off** on its next request. **Tests.** 11 backend cases: no token / garbage token / revoked token all rejected; a `camera_stream` token refused by the feed (the assertion the separate scope exists for); a `camwall` token accepted; the payload's key set pinned so a future field can't quietly add a serial, an IP or a filename; a Cam Wall token passes the camera-stream gate so its own tiles fill; a camera-stream token still passes its own gate (regression guard on #1108); and the scope allowlist pinned so adding a third scope has to be a deliberate act. 7 frontend cases covering the kiosk feed being called with the URL token, the token reaching the `<img>` URLs, no settings popover, inert tiles, `?status=full` refused, the expired-token message, and — the negative — a tokenless visit never touching the kiosk endpoint. **Scope.** New endpoint, new token scope, new route. No DB migration, no new permission, no change to the in-page wall.
- **Live print progress for Virtual Printers in Bambu Studio / OrcaSlicer (#1887, reporter @YozenPL)** — Connect the slicer to a server-mode VP with a target printer bound and the Device tab shows the printer's AMS, temperatures and camera, but the print itself reads as a name and nothing else: no stage, no percentage, no layer count, no time remaining. The data was never missing — the bridge has the target's real `push_status` cached, `mc_percent` and all — Bambuddy was deliberately overwriting it with zeros. **Why it was zeroed.** #1558, the exact inverse complaint: a queue-mode VP that passed the live values through was read by Bambu Studio as *busy*, and the Send button went away for as long as the printer printed, which defeats the entire purpose of queueing. **Why you cannot simply have both.** Both slicers gate the Device-tab progress panel and the Send button on one and the same predicate — `MachineObject::is_in_printing()`, true when `gcode_state` is RUNNING / PAUSE / SLICING / PREPARE. `StatusPanel::update_subtask()` draws the progress bar on it; `SelectMachineDialog::update_show_status()` disables Send on it. Report the printer's state honestly and you get progress at the cost of Send; zero it and you get Send at the cost of progress. There is no field-level trick, because it is one boolean. **The fix.** There is exactly one state in the gap: `FINISH`. StatusPanel renders the full progress panel for it (`is_in_printing() || print_status == "FINISH"`), SelectMachineDialog does not consider it busy. The VP already parks there after every upload — that is the #1280 / #1658 send-modal handshake — which is precisely why the reporter saw a file name and no numbers: the slicer was already drawing the widget, and we were feeding it zeros. So while the target printer is printing and the VP has no upload of its own in flight, the report now holds `gcode_state=FINISH` and passes the real `mc_print_stage`, `mc_percent`, `mc_remaining_time`, `stg`, `stg_cur`, `layer_num` and `total_layer_num` through underneath it, at the existing 1 Hz push. Send stays enabled in every mode and #1558 does not come back. **What it costs.** The slicer's Pause / Resume / Stop buttons stay greyed for a server-mode VP, since it now reports a finished job rather than a running one — they were greyed before this change too, so nothing is lost; drive the print from Bambuddy, or use Proxy Mode, where the slicer talks to the printer directly and they work. `print_error` is never mirrored either: a fault on the printer would raise a modal error dialog in the slicer for a machine that did not throw it, and the printer's own card already reports it. **The upload handshake wins.** Mirroring is suppressed while a job is being handed over (`gcode_state=PREPARE`) and for five seconds after the last upload transition — the slicer only releases its in-flight-job lock when it sees FINISH carrying the `subtask_name` it just uploaded, so swapping in the printer's filename mid-handshake would wedge the send modal at "Downloading". Once settled, the report switches to the job that is actually on the bed, which is the one the user wants to watch. **Tests.** 8 cases: progress mirrors while the target prints; the mirrored state is never one the slicer reads as busy (parametrised over RUNNING and PAUSE — this is the assertion that keeps #1558 fixed); progress stays zeroed while the target is idle, while an upload is in flight, and inside the settle window, where the slicer's own filename is still echoed back at it; mirroring resumes once the handshake has settled; `print_error` is suppressed while the rest still mirrors. Verified by mutation — forcing the mirror off fails five of the eight. **Scope.** Backend only, non-proxy VPs with a target printer bound. No DB migration, no schema change, no new setting, no new permission, no i18n change.
- **Slicer Pipelines — multi-copy batches, class targeting, fanout strategies, runs dashboard, retry-failed, live WS updates (#1425 PR C — completes the v3 design)** — The PR A/B drop turned slice-modal preset bundles into one-click dispatches with a pinned target printer. PR C closes the original issue with full production-batch semantics: an operator picks a saved pipeline, types in a number of copies, and Bambuddy slices once and distributes the prints across a fleet according to the pipeline's chosen fanout strategy. The runs dashboard surfaces every active and historical run with filters, per-row expandable per-copy status, cancel-in-flight, and retry-failed-copies. WebSocket pushes keep the dashboard and the in-Settings "Last run" chip live without polling. **Backend.** `PipelineRunCreateRequest.copies` (Pydantic `ge=1, le=1000`) replaces the implicit 1 from PR B; the orchestration loop creates one `PipelineJob` row per copy. `SlicerPipelineUpdate` accepts `target_kind` (`specific_printer` / `printer_class`), `target_model_class` (Bambu model code: A1 / A1 Mini / P1P / P1S / P2S / X1 / X1C / X1E / H2D / H2D Pro / H2C / X2D), and `fanout_strategy` (`max_parallel` / `round_robin` / `fill_one_first`). A new `pipeline_max_copies` setting (default 50, Pydantic `ge=1, le=1000`) gates the copies input in the Run-with-pipeline modal and is enforced again at `POST /run` time so an API caller can't bypass the cap. PR C also adds `PipelineRun.parent_run_id` (nullable FK to itself, ON DELETE SET NULL) so retry runs link back to the run whose failed copies they re-attempt. **Eligibility for class targeting.** The matcher in `services/pipeline_eligibility.py` now branches on `pipeline.target_kind`: the specific-printer path is unchanged (PR B parity), the new class-targeting path enumerates every `Printer` whose `model` matches `pipeline.target_model_class`, runs the per-printer slot-by-slot check for each via a `status_lookup` closure that the route handler hands in (so the matcher stays pure-ish for unit tests), and returns a top-level `printer_reports: list[PerPrinterReport]` with `ok` derived as `any` across the candidates. New issue kinds: `no_class_matches` (the install has zero printers in the chosen model class) and `class_not_set` (target_kind is `printer_class` but no model was picked). The lenient-policy story is the same — operators can `Run anyway` past blocking issues, and `PipelineRun.eligibility_overridden` is set so the audit trail shows it. **Orchestration + fanout.** A new `_pick_assignments(pipeline, copies)` helper returns `[(printer_id_or_None, target_model_or_None), …]` of length copies per the picked strategy. `max_parallel` sets `target_model=pipeline.target_model_class` on every queue item and leaves `printer_id=None` — the existing print scheduler's model-based dispatch picks any idle matching printer per item; the result is that multiple printers grab work in parallel without any new scheduler code. `round_robin` enumerates eligible printers (`is_active=True`, model matches) ordered by id and assigns copy `i` to `eligible[i % len(eligible)]` — each item gets a fixed `printer_id`, the wear distributes evenly. `fill_one_first` pins every copy to `eligible[0]` so a one-printer fleet stays one-printer even when others come online mid-run; the documented trade-off is that a printer failure freezes the queue at that printer until the operator intervenes. All three flows reuse the same slice-once path; the slice runs through `slice_dispatch.enqueue` exactly as PR B did so the persistent progress toast renders end-to-end for batches just like single-copy runs. **Routes.** `GET /pipeline-runs?limit&offset&pipeline_id&status` is the dashboard endpoint — newest-first, paginated, filterable by pipeline and persisted snapshot status. `POST /pipeline-runs/{id}/retry-failed` counts the parent's failed-or-cancelled jobs at the live (queue-entry-aware) status level, builds a fresh `PipelineRunCreateRequest` with `copies=that count` and `force=True` (operator already accepted eligibility on the parent), routes it through the existing `run_pipeline` handler, and stamps `parent_run_id` on the result. Returns 400 when the parent's source or pipeline was deleted, or when there are no failed copies to retry. `POST /pipeline-runs/{id}/cancel` extends PR B's cancel to cascade across N queue entries — only the ones still in `pending` / `queued` are touched so in-flight prints continue on the printer (operator must Stop on the machine). **WebSocket.** New `pipeline_run_updated` event type carries the full materialised `PipelineRunResponse` and fires on every state transition (`queued → slicing → dispatching → in_progress → completed | failed | partial_failure | cancelled`). Per-user routing via `ws_manager.broadcast_to_user(run.created_by, …)` so each operator sees their own runs without cross-user noise; auth-disabled installs broadcast to all connections (PR B's pattern). The frontend's `useWebSocket` switch handles it by invalidating both `['pipeline-runs-all']` (the dashboard) and `['pipeline-runs', pipeline_id]` (the per-pipeline "Last run" chip in Settings). The dashboard still polls every 15 s as a belt-and-suspenders for missed messages. **Run status roll-up.** A new `_roll_up_run_status` function computes the run-level status from the per-job statuses at read time: all-completed → `completed`, any in-flight → `in_progress`, some completed + some failed → the new `partial_failure` status (this is what gets the Retry-failed button), all failed → `failed`. The persisted snapshot is still written on terminal transitions for the dashboard's status filter to remain useful. `copies_completed` / `_failed` / `_cancelled` / `_in_progress` counts ride on the response so per-row "1/3 · 2 failed" summaries don't need a second query. **Frontend.** The Settings → Workflow → Pipelines pipeline editor grows three new controls in the edit form: a radio for `target_kind` (Specific printer / Printer class), a model-class picker filtered to the models present on at least one installed `Printer` row (so users can't pick "H2C" if they only have X1Cs), and a fanout-strategy radio with the three options labelled with their use cases. The read-only row reflects class targeting with a "X1C · Round robin" line in place of the printer name. `RunWithPipelineModal` grows a number input for copies bounded by `settings.pipeline_max_copies`, accepts class-targeted pipelines (the "Apply pipeline" button is enabled when the pipeline has either a pinned printer OR a class target), and the pipeline-list row shows "Any X1C" instead of a printer name for class pipelines. The "Run pipeline" Setting → Workflow → Queue & Dispatch sub-tab gets a new "Slicer Pipeline limits" card with the max-copies input (bounded 1–1000 client-side, server enforces the same). **New dashboard page at `/pipelines/runs`** (sidebar entry under Print Queue, gated on `pipelines:read`). Lists every run across every pipeline with two dropdown filters (pipeline + persisted snapshot status) and pagination at 25 per page. Each row shows pipeline name, status chip (`partial_failure` is amber), source file, created-at timestamp, and "{completed}/{copies}" + "{failed} failed" rollup. Click the chevron to expand a per-copy panel listing each `PipelineJob`'s assigned printer + status + error message. In-flight runs get a Cancel button; partial-failure / failed runs get a Retry-failed button. **i18n.** ~43 new keys across `nav.pipelineRuns`, `pipelineRuns.*` (title / filters / pagination / job-status chips / toasts), `settings.pipelines.field.*` (targetKind / fanout / class), `settings.pipelines.runs.status.partial_failure`, `settings.pipelineLimits.*`, `library.runWithPipeline.*` (copies / copiesHint / classTarget / issue.noClassMatches / issue.classNotSet), and `common.previous` / `common.next` — translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5516 leaves per locale, no English fallback. `Copies` / `{{n}} copies` / `max {{n}}` added to the French + Italian cognate allowlists where they're genuine. **Tests.** Six new backend cases in `test_pipeline_runs_api.py` covering copies-cap rejection (schema gate at 1000), 3-copy run creates 3 jobs with sequential `copy_index`, class eligibility with two X1C candidates returns a 2-entry `printer_reports` array, class eligibility with no matching printers in install returns `no_class_matches`, dashboard list endpoint with pagination + status filter, retry-failed correctly counts failed jobs from a partial-failure parent and stamps `parent_run_id`. Plus the existing 16 PR A/B cases were lightly updated where `class_not_set` is now a valid no-target signal alongside `printer_not_set`. Five new frontend cases in `PipelineRunsPage.test.tsx` pin the dashboard's empty state, list rendering, Cancel button on in-flight runs, Retry-failed button on partial-failure runs, and per-row expand to show jobs. Three updated frontend cases (`RunWithPipelineModal.test.tsx`) assert the new four-arg signature on `runPipeline` (`pipelineId, source, force, copies`). One updated `SettingsPage.test.tsx` sidebar-order test reflects the new `pipelineRuns` nav entry between `queue` and `projects`. **Suites.** `pytest -n 30 backend/tests/` 6539/6539 green; `npx vitest run` 2284/2284 green (173 files); `npm run build` clean; `python -m ruff check backend/` clean; `node scripts/check-i18n-parity.mjs` clean. **Scope.** PR C closes the v3 design — no further pipeline PRs are queued. The existing print scheduler's model-based dispatch (`PrintQueueItem.target_model` + `target_location` + `required_filament_types`) is the only thing that makes class targeting actually distribute work; PR C just plugs into it. The `fill_one_first` strategy's "one printer fails, queue stalls" trade-off is documented in the editor's option-row hover-hint and in the orchestrator code comment — it's the correct behaviour for "I want one printer to finish a batch end-to-end" and the wrong behaviour for "I want resilience"; the right strategy for resilience is `max_parallel`. **Cross-printer-class pipelines** (e.g. one pipeline targeting "any X1C OR P1S") remain out of scope — make two pipelines, one per class.
- **Slicer Pipelines — Archive entry point + progress toast for pipeline-driven slicing (#1425 PR B follow-up)** — Two real gaps from the PR B drop. (1) The Run-with-pipeline button only existed in the file manager — operators who keep their working files in archives had to copy them out to the library to use a pipeline. (2) Triggering a slice via a pipeline produced a silent multi-second-to-minute wait — the manual SliceModal flow has the sticky `Slicing X — Generating G-code 75%` persistent toast, the pipeline path went through `asyncio.create_task` directly and never registered with `SliceJobTracker`. **Fix.** (1) `POST /slicer-pipelines/{id}/check-eligibility` and `POST /slicer-pipelines/{id}/run` now accept `source_archive_id` as an alternative to `source_library_file_id` (XOR — Pydantic validator rejects both-set and neither-set), and the eligibility-check and orchestration paths branch via `_resolve_source` which reads `archive.source_3mf_path` with a fallback to `archive.file_path`. `PipelineRun.source_archive_id` is a new nullable FK column (Postgres + SQLite `ALTER TABLE` in `run_migrations` — idempotent via `_safe_execute`). `PipelineRunResponse` echoes the field. ArchiveCard's context menu picks up a `Run with pipeline` item alongside the existing Slice action (only on source archives — gcode archives already have Print + Open in BambuStudio), gated on `useSlicerApi` + `pipelines:run`. Path-safety: `Path(base_dir) / archive.source_3mf_path` carries a `SEC-PATH-OK` marker citing the upload-time validator at `_resolve_source_3mf_path` (same comment style as `routes/archives.py:3955`); the `LibraryFile.file_path` site gets the same treatment. (2) The pipeline orchestrator is now the `run` callable of a `slice_dispatch.enqueue` call — the same dispatcher the manual `SliceModal` flow uses — instead of a bare `asyncio.create_task`. The SliceJob's lifecycle (`pending → running → completed/failed`) drives the existing progress toast end to end: same persistent toast, same `Generating G-code 75%` weave from the sidecar's `--pipe` channel, same auto-replace with a transient success/error toast on terminal. `PipelineRun.slice_job_id` is set on the run row before the route returns 202, so the frontend can call `useSliceJobTracker().trackJob(slice_job_id, source.kind, source.filename)` from `RunWithPipelineModal`'s `runMutation.onSuccess` — same one-call surface that `SliceModal`'s slice mutation already uses. (3) `RunWithPipelineModal`'s `source` prop is now `{kind: 'libraryFile' | 'archive', id, filename}` (mirrors `SliceModal.SliceSource`); `api.checkPipelineEligibility` + `api.runPipeline` take a discriminated-union source argument and route to the right backend field. `PipelineRun` TS type grows `source_archive_id`. **Tests.** Three new backend cases in `test_pipeline_runs_api.py` — archive-source happy path (creates a PrintArchive row + on-disk file, posts with `source_archive_id`, verifies the response carries `source_archive_id` + `slice_job_id` from a stubbed `slice_dispatch.enqueue`), XOR rejection both-set, XOR rejection neither-set. The existing three run/cancel cases were updated to patch `backend.app.services.slice_dispatch.slice_dispatch.enqueue` (the new mock target) instead of the removed `_run_pipeline_orchestration` helper, and the run-happy-path now asserts `slice_job_id == 9001` arrives on the response. One new frontend case in `RunWithPipelineModal.test.tsx` pins the archive flow end to end (`checkPipelineEligibility` called with `{kind: 'archive', id: 7}`, then `runPipeline` with the same). The existing fast/slow path tests were updated to wrap in `SliceJobTrackerProvider` (the new `useSliceJobTracker` hook requires it) and to assert the new discriminated-union source argument. **Suites.** `pytest -n 30 backend/tests/` 6533/6533 green; `npx vitest run` 2279/2279 green (172 files); `npm run build` clean; `python -m ruff check backend/` clean; `node scripts/check-i18n-parity.mjs` clean. **Scope.** No new i18n keys — both fixes reuse the existing PR B keys. No new permission. The archive flow only branches at the source-resolution layer; everything downstream (eligibility, slice, queue dispatch) is the same code path the library flow uses. PR C scope (multi-copy + class targeting + fanout) is unchanged.
- **Slicer Pipelines — Run a pipeline on a file with one click (#1425 PR B)** — PR A landed the bundle (save & apply preset slots in the SliceModal). PR B turns that bundle into an actual one-click dispatcher: file-manager rows now carry a `Run with pipeline ▾` button that slices the source through the pipeline's pinned printer/process/filament/bed-type combo and enqueues the print on the pipeline's pinned target printer. **Scope.** Single-target dispatch — `target_kind='specific_printer'` only. Multi-copy batch + class targeting + fanout strategies are PR C; the schema columns are already in place from PR A so PR C is code-only. **Backend.** Two new SQLAlchemy models — `PipelineRun` (one row per Run-pipeline click, carries the slice_job + sliced_library_file ids + snapshot status) and `PipelineJob` (one row per copy; PR B always 1, PR C variable). Soft-link to slicer_pipelines via `ondelete='SET NULL'` so run history survives a pipeline delete; same for source_library_file. **`status`** on the run is a *persisted snapshot* that gets terminal transitions written (slice failure, cancel, completion); in-flight reads roll up the live state of the linked queue entry via `_compute_run_status` — that keeps the status accurate (`pending → printing → completed`) without a background watcher writing on every queue tick. **Eligibility matcher** at `services/pipeline_eligibility.py` — given a pipeline + the live `PrinterState` from `printer_manager.get_status`, returns a structured report with typed issues: `printer_not_set`, `printer_not_found`, `printer_disabled` (from `Printer.is_active` shipped with #1476), `printer_offline`, `filament_type_mismatch`, `filament_color_mismatch`, `ams_slot_missing`, `filament_unverified` (cloud/standard tier presets can't be statically read here; surface as info, not a block). Canonical filament-type map mirrors `print_scheduler._canonical_filament_type` so `PLA Basic` / `PLA Matte` / etc. all collapse to `PLA` for the type comparison; colour normalises to six-hex-digit lowercase. **Eligibility is lenient with confirmation** — the report drives the frontend confirmation modal, but the user can `Run anyway` (sets `eligibility_overridden=True` on the run row so the audit trail shows which runs bypassed pre-flight). **Routes.** Two new routers — `pipeline_run_create_router` mounted under `/slicer-pipelines` (POST `/{id}/check-eligibility`, POST `/{id}/run`, GET `/{id}/runs?limit=N`) and `pipeline_run_router` at `/pipeline-runs` (GET `/{id}`, POST `/{id}/cancel`). `POST /run` returns 202 with the run shape; orchestration happens in a fire-and-forget `asyncio.create_task` that opens its own DB session (the request's session is closed by the time it runs) and walks: status='slicing' → `slice_and_persist` with the pipeline's `SliceRequest` → on success `status='dispatching'` + insert `PrintQueueItem` with `printer_id=target_printer_id, library_file_id=sliced_library_file_id`. The existing scheduler picks the queue entry up on its next tick. `POST /run` with eligibility issues and no `force` returns 409 with the report inside `detail` so the frontend can render the same confirmation modal it would for an explicit pre-flight; `force=true` bypasses the 409 but a missing `target_printer_id` still 400s (defence in depth — the UI can't enqueue the print without a target). `POST /cancel` is idempotent on terminal states and cascades to the linked queue entry when its status is still `pending` / `queued` (in-flight prints continue — operator must Stop on the printer itself). **SlicerPipeline.target_kind / target_printer_id** become writable via `PUT /slicer-pipelines/{id}` — the schema accepts both fields, the route treats `target_printer_id=0` as "clear" (the empty-`<option>` HTML coercion) and a positive value as a literal FK. **Frontend.** SlicerPipelinesPanel in Settings → Workflow → Pipelines extends its edit form with a target-printer `<select>` (populated from `api.getPrinters()`); pipelines without a target render an amber "Set a target printer to run this" hint in the row + a "Set a target printer before running this pipeline" warning at the bottom. Last-run summary appears inline per row — small `Last run: completed · 27/06/2026, 14:23` line driven by `GET /slicer-pipelines/{id}/runs?limit=1` with a 15 s `refetchInterval` so the chip ticks while a run is in flight. `RunStatusBadge` colour-codes the seven states. **New component `RunWithPipelineModal`** at `components/RunWithPipelineModal.tsx` — two-step dialog: step 1 lists the user's pipelines (each row shows the pinned target printer; pipelines without a target are disabled with a `No target printer set` hint), step 2 is the eligibility confirmation. Fast path: ok=true skips step 2 entirely and fires the run straight from the pipeline pick. Slow path: shows per-issue text via the `IssueText` mapper — eg. `Filament slot 1: expected PLA, AMS has PETG` for `filament_type_mismatch`, `AMS slot 2 not available on this printer` for `ams_slot_missing` — then `Run anyway` posts with `force=true`. **FileManagerPage integration**: FileCard's action menu picks up a `Run with pipeline` entry (gated on the new `pipelines:run` permission); list-view rows get a matching inline Play-icon button so list users have the same entry point as card users. Both flow into the same `setRunPipelineFile(file)` state which renders the modal. The action is only offered on slice-eligible files (3MF / STL / STEP) and only when `use_slicer_api` is on — matches the existing Slice button gating, since a non-slice-eligible file can't reach the slice step in any case. **Frontend types**: client.ts grows `PipelineEligibilityReport`, `PipelineRun`, `PipelineJob`, `PipelineRunListResponse`, plus six new `api.*` methods (`checkPipelineEligibility`, `runPipeline`, `listPipelineRuns`, `getPipelineRun`, `cancelPipelineRun`, and the updated `updateSlicerPipeline` which now accepts `target_kind` + `target_printer_id`). The `Permission` union also gets `pipelines:read | pipelines:write | pipelines:run` — these were on the backend Permission enum from PR A but had been missed in the frontend union (caught when TS rejected `hasPermission('pipelines:run')`). **i18n.** ~36 new keys across `library.runWithPipeline.*` (modal title / confirm / source-hint / pipeline-hint / target-hint / Run-anyway / 8 issue-kind strings / 2 toast / empty-state / no-target hint) and `settings.pipelines.field.targetPrinter` / `field.noTarget` / `noTargetHint` / `noTargetWarning` / `runs.lastRun` + seven `runs.status.*` strings — translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5473 leaves per locale, no English fallback. The string `slicing` was added to `IT_COGNATES` (genuine cognate — same word in Italian). **Tests.** 13 new backend integration cases in `test_pipeline_runs_api.py` covering PUT target write + clear-via-0 + check-eligibility (printer_not_set / printer_disabled cascade with offline / fully-clear AMS-match) + run flow (409 on issues+!force / 400 on force+!target / 202 on clean path with creation of run+job) + list/get 404s + cancel (404 / marks queued / idempotent on terminal). Slicing itself is stubbed via `patch(..._run_pipeline_orchestration)` so CI runs without a live sidecar. 4 new vitest cases in `RunWithPipelineModal.test.tsx` pin the modal's two-step flow: empty state, disabled pipeline-without-target, fast-path (issues empty → modal closes immediately after `runPipeline(..., false)`), slow-path (issues shown → `Run anyway` posts with `force=true`). **Suites.** `pytest -n 30 backend/tests/` 6530/6530 green; `npx vitest run` 2278/2278 green (172 files); `npm run build` clean; `python -m ruff check backend/` clean; `node scripts/check-i18n-parity.mjs` clean. **What's out of scope for PR B.** Multi-copy (`copies > 1`), class targeting (`target_kind='printer_class'`), fanout strategies, the Pipeline Runs dashboard — all PR C. Painted multi-filament 3MFs still hit the upstream OrcaSlicer CLI gate (OrcaSlicer/OrcaSlicer#13774); the slice step inside the pipeline run fails the same way the standalone slice route does, the run rolls up to `status='failed'` with the slicer's error string in `error_message`. The print queue's existing AMS / filament check + the printer-side error path remain authoritative for what actually happens at the machine — pipeline eligibility is a *pre-flight*, not a hard guard.
- **Slicer Pipelines — save & reuse a preset bundle in one click (#1425 PR A, requested by @TheUltimateC0der)** — Top feature in the first sponsor vote. The SliceModal forces the user to pick four slots every time: printer / process / filament(s) / bed type. For fleet production that's tedious and error-prone — operators want a named "Production PLA" bundle they can apply with one click on every file and every printer. **PR A scope.** Definitions only. The new model `slicer_pipelines` materialises the bundle plus future-PR columns (`target_kind`, `target_printer_id`, `target_model_class`, `fanout_strategy`) so PR B (single-target dispatch) and PR C (multi-copy batch with capability-matched fanout) are code-only, not migrations. The bundle is independently useful in PR A as an ergonomic improvement: pipelines are picked from the SliceModal, applied to the four slots, then sliced through the existing flow. No new dispatch behaviour yet. **Backend.** Model `SlicerPipeline` (`models/slicer_pipeline.py`), Pydantic schemas `SlicerPipelineCreate` / `Update` / `Response` reusing the existing `PresetRef` shape from `schemas/slicer.py`, CRUD routes at `/api/v1/slicer-pipelines/` (`GET list`, `POST create`, `GET/PUT/DELETE by id`). Soft-delete via `is_deleted` so PR B+ run history can still resolve pipeline metadata after the operator removes one. Listed newest-first by `id DESC` (more reliable than `created_at` under back-to-back inserts whose DateTime precision can tie). Routes use explicit `await db.commit()` after the mutation (matches the `routes/library.py` pattern) so the response shape returns the committed row. **Permissions.** Three new `Permission` values: `PIPELINES_READ`, `PIPELINES_WRITE`, `PIPELINES_RUN`. PR A only consumes the first two; `RUN` is defined now so PR C doesn't need to backfill. `Administrators` and `Operators` get all three; `Viewers` get `PIPELINES_READ`. A backfill block in `seed_default_groups()` adds them to existing groups on upgrade (mirrors the `library:purge` / `archives:purge` pattern from earlier). All three are added to `_APIKEY_DENIED_PERMISSIONS` so they fail closed for any API-key surface — PR B / PR C may move `PIPELINES_RUN` onto `can_queue` once the dispatch lands. **Frontend.** Settings → Workflow tab is split into two sub-tabs mirroring the Authentication tab's pattern: **Queue & Dispatch** (the existing Workflow content) and **Pipelines** (the new manager). The Workflow sidebar entry stays single — no expandable submenu — and the sub-tab choice is reflected in the URL (`?tab=queue&sub=pipelines`) for deep-linking. **SlicerPipelinesPanel** lists saved pipelines with inline rename, soft-delete, and a stale-preset warning when a referenced preset no longer resolves against the unified-presets listing (e.g. an `orca_cloud` preset deleted in OrcaSlicer; the pipeline still saves, the warning prompts a re-save from the SliceModal). Full pipeline creation lives in the **SliceModal** rather than Settings — the user has already done the four-slot work there. The modal grows an `Apply pipeline ▾` dropdown plus a `Save as pipeline` button above the existing preset dropdowns. Apply fills all four slot states (`printerPreset`, `processPreset`, `bedType`, `filamentPresets[]`); the filament list right-pads from current state so a pipeline with fewer entries than the current source's slot count keeps the existing tail (lets the same pipeline apply across single-color and multi-color files). Save captures the four-slot picks under an inline-named pipeline. Stale-preset warning shows on the Settings list, not blocking apply, so an old pipeline with a one-deleted-preset can still be re-applied and re-saved with the new pick. **i18n.** ~30 new keys across `settings.pipelines.*` and `slice.pipelines.*` plus `settings.tabs.queueDispatch` / `queuePipelines`, translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5437 leaves per locale, no English fallback. `Pipeline` / `Pipelines` / `Filament {{n}}` added to `IDENTICAL_TO_EN_ALLOWED` for the locales where they're genuine cognates (de / es / fr / it / pt-BR / tr). **Tests.** Backend: 11 integration cases in `test_slicer_pipelines_api.py` covering empty list, create + round-trip, get-by-id, partial PUT preserves untouched fields, filament list replaces wholesale, soft-delete hides from list + GET-by-id, 404s on missing, schema rejection of empty filament list + invalid PresetRef source, newest-first ordering. Frontend: 3 new SliceModal cases (apply-pipeline dropdown disabled-empty / apply-sets-state / save-as-pipeline-round-trip) plus 2 SettingsPage cases (sub-tab nav renders + Pipelines deep-link). Existing SliceModal tests adjusted via a `presetSelects()` helper that filters out the new Apply-pipeline combobox so historical `selects[0]` indexing into printer/process/filament remains stable. **Suites.** `pytest -n 30 backend/tests/` 6517/6517 green; `npx vitest run` 2274/2274 green (171 files); `npm run build` clean; `python -m ruff check backend/` clean; `node scripts/check-i18n-parity.mjs` clean. **Scope.** No new dispatch behaviour yet — pipelines are a preset-bundle convenience layer in PR A. PR B adds single-target dispatch (the `target_kind='specific_printer'` path), PR C adds multi-copy batch with capability matching + the three fanout strategies (`max_parallel` / `fill_one_first` / `round_robin`). The `Run pipeline` action mentioned in the original issue is PR B/C and intentionally not exposed in this drop. Painted multi-filament 3MFs still hit the upstream OrcaSlicer CLI gate (`OrcaSlicer/OrcaSlicer#13774`); the slice fails, the pipeline doesn't pre-validate.
- **Sticky upload-progress toast restored for scheduler-driven dispatch (#1625 follow-up)** — `#1625` (`Unify print dispatch through the scheduler`) moved every print's FTP push to the printer into the server-side scheduler tick, which means the user's click no longer carries an XHR with `progress` events — the old browser-side upload modal had nothing to show because there was no browser-side upload anymore. Users only saw the queue item flip to "active" with no visibility into the multi-second to multi-minute FTP push + the H2D/H2D Pro 80–210 s `project_file` digestion window before the printer actually started extruding. **Fix.** The legacy bg-dispatch toast rendering from `0b43ac0d:frontend/src/contexts/ToastContext.tsx` lines 510–650 is **ported back in place verbatim** — same DOM tree, same Tailwind classes, same `formatFileSize` bytes line, same uppercase status chip, same collapse chevron, same `awaitingPrinter` derivation, same auto-dismiss-when-all-terminal — only adapted to read from the four scheduler-side WS events introduced here instead of the legacy `background-dispatch` aggregate event. **Materialization only on actual upload start.** The toast appears when the FTP push to the printer starts (`queue_item_uploading`), NOT on `POST /queue` — a draft that emitted at queue-add time made the toast jump to "Dispatched" before any upload had happened. Four backend lifecycle WS events drive the rendering: `queue_item_uploading` (start of FTP, carries `printer_name` + `total_bytes` from `file_path.stat().st_size`), `queue_item_upload_progress` (throttled byte-level updates — first call always emits + emit when ≥200 ms elapsed OR ≥256 KB transferred since last emit, plus always emit at `bytes_transferred >= total_bytes`; this matches the legacy `background_dispatch.py:614-615` gates 1:1 so the bar feels identical on small AND large files; a single shared `_UploadProgressBridge` instance bridges from the FTP executor thread back to the asyncio loop via `run_coroutine_threadsafe`), `queue_item_acked` (watchdog confirmed printer transitioned out of `pre_state`), `queue_item_failed` (any error, with a `reason` key the toast looks up as `dispatchToast.failed.{reason}` for upload-vs-start-command differentiation, generic fallback). **No `queue_item_dispatched` event** — the legacy bg-dispatch path kept `status='processing'` from upload start until printer ack, and the "Awaiting printer…" subtitle is derived purely from `upload_progress_pct >= 99.9` (the legacy `uploadDoneAwaitingPrinter` trick at line 568-572). An explicit `dispatched` event would push the status chip out of `PROCESSING` prematurely — which is exactly what the first screenshot-iteration showed. **Per-user routing.** New `ws_manager.broadcast_to_user(user_id, msg)` filters connections by `websocket.state.bambuddy_principal_user_id` — resolved once at WS connect time via a `select(User.id).where(User.username == principal)` lookup so per-message routing is O(connections) not O(connections × DB). Auth-disabled installs route `user_id=None` to all connections, matching the legacy single-user toast behaviour. The watchdog success path receives `created_by_id` via a new kwarg so the static `_watchdog_print_start` method can still emit the `acked` event without re-fetching the queue item. **Backend.** ~110 LOC across 3 files: `core/websocket.py` (`broadcast_to_user` + four event helpers, `bambuddy_principal_user_id` filter on each connection), `api/routes/websocket.py` (principal username → User.id resolve at connect, stashed on `websocket.state.bambuddy_principal_user_id`), `services/print_scheduler.py` (`_UploadProgressBridge` thread-safe throttle class, `queue_item_uploading` emitted before FTP with `printer.name`, `progress_callback=` plumbed into both the `with_ftp_retry` and direct `upload_file_async` branches via `**kwargs`, `queue_item_failed` at the FTP-fail spot, watchdog success path emits `acked` on both Phase A and Phase B exits). **Frontend.** Rendering ported in place to `contexts/ToastContext.tsx` (`dispatchData` field on `Toast`, ingest `useEffect` mapping the four `bambuddy:dispatch-toast` event types to legacy `DispatchToastJob` shape, terminal-state auto-dismiss `useEffect`; legacy rendering block reused 1:1 minus the cancel button — BG dispatch's `/background-dispatch/{id}` DELETE doesn't exist in the scheduler model and adding it is out of scope). `hooks/useWebSocket.ts` forwards the four `queue_item_*` cases via `window.dispatchEvent(new CustomEvent('bambuddy:dispatch-toast', { detail }))`, matching the existing `plate-not-empty` / `unknown-tag` patterns. **i18n.** 11 keys × 11 locales under `dispatchToast` (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW): `untitled` / `startingPrints` / `progressSummary` (header `{{complete}}/{{total}} complete • Processing: {{processing}}` — `Dispatched: X` from the legacy summary was dropped because the scheduler has no pre-upload "dispatched" state) / `expandDetails` / `collapseDetails` / `awaitingPrinter` / `status.{processing|completed|failed}` / `failed.{generic|upload_failed|start_command_failed}` / `dismiss`. Locale parity check 5401 leaves per locale, no English fallback. **Tests.** Backend `test_ws_broadcast_to_user.py` pins the routing contract (filter by user_id, fan-out on None, payload shape with `printer_name` for `uploading`, server-side pct compute including divide-by-zero); `test_upload_progress_bridge.py` pins the throttle (first call always emits, 256 KB byte gate honoured even when time gate would skip, completion always emits, no-op on zero bytes, no-op when no loop). Frontend `__tests__/contexts/DispatchToastContext.test.tsx` pins the **materialization-on-uploading invariant** (stray progress / acked event before any `uploading` does NOT render — regression guard), the uploading → "Awaiting printer…" → acked lifecycle with status chip staying `PROCESSING` through the whole upload (regression guard for the screenshot-reported "Dispatched: 1 immediately" bug), 3.5 s auto-dismiss when terminal, concurrent jobs sharing one wrapper, collapse + dismiss buttons. **Suites.** `pytest -n 30 backend/tests/unit/test_ws_broadcast_to_user.py backend/tests/unit/test_upload_progress_bridge.py backend/tests/integration/test_print_queue_api.py` green; `vitest run src/__tests__/contexts/` 49/49 green; `ruff check backend/` clean; `npm run build` clean. **Scope.** No DB migration. No new permission. The `bambuddy:dispatch-toast` window event is internal to the frontend bundle, not a public hook — third-party plugins should not subscribe to it. The 0–30 s scheduler-tick pickup wait is unchanged; this fix only addresses *visibility* of what happens once the upload starts. Tiny test files that upload in a single FTP chunk will still jump straight to "Awaiting printer…" because the first-and-last progress callback is one and the same event — same edge as the legacy bg-dispatch behaviour on sub-256 KB files.
- **Cam Wall: don't kill shared streams when one viewer closes + offline tiles show OFF, not LIVE** — Two small but load-bearing fixes against the new cam-wall view. **(1) Offline tile chip.** A disconnected printer (`status.connected === false`) was still assigned `live` mode by `CameraWall.modeByPrinter` — it consumed a `Max live streams` budget slot AND rendered the red `LIVE` chip on top of the `WifiOff` placeholder. The allocator now treats `!connected` like off-screen — assigns `paused`, leaves the live budget intact. The existing `CameraTile` rendering (`WifiOff` icon, dark `Off` chip) takes over automatically. Side effect: an 8-printer wall with 2 offline X1Cs no longer wastes 2 of the 4 default live slots on dead tiles. **(2) Shared-broadcaster teardown.** `/api/v1/printers/{id}/camera/stop` is the unmount cleanup for every camera consumer (`CameraTile`, `EmbeddedCameraViewer`, popup `CameraPage`). It used to unconditionally `shutdown_broadcaster(f"printer-{id}")` + kill every ffmpeg in `_active_streams` whose key starts with `{printer_id}-`. The fan-out broadcaster is shared across all viewers of the same printer, so closing the embedded viewer while the cam-wall tile of the same printer was visible force-killed the source the tile was pulling from — the tile's `<img>` errored out and showed `No signal` until the user navigated away. The broadcaster itself already has correct natural-shutdown semantics: each subscriber's HTTP teardown calls `unsubscribe(queue)`, and when the count reaches 0 the broadcaster's own `_grace_then_stop` waits `_GRACE_SECONDS` (5 s) before tearing down — re-checking under the lock so a new subscriber rejoining cancels the shutdown. `/camera/stop` was just a fast-cleanup shortcut for the single-viewer case. **Fix.** New `get_subscriber_count(key)` accessor in `camera_fanout.py` exposes the broadcaster's `subscriber_count` (the private list-len already used internally). The `/camera/stop` route now reads `get_subscriber_count(f"printer-{printer_id}")` BEFORE the force-teardown; when ≥ 1 subscriber is still attached, it returns `{"stopped": 0, "skipped": true}` early and leaves the broadcaster + ffmpeg processes alone. The leaving viewer's HTTP teardown still runs the natural `iter_subscriber.finally → unsubscribe` path, so its subscription is correctly released; the broadcaster keeps serving the other viewer(s). Single-viewer close still hits the force-teardown path immediately (no subscribers remain at all). Cost: in the race where the leaving viewer's HTTP teardown has already propagated to the broadcaster at the moment its `/camera/stop` POST lands (count just dropped to 0), force-teardown still runs and we miss the optimization for a different actually-still-subscribed viewer — but the natural grace-shutdown bounds the worst case at 5 s of ffmpeg tail, not a stuck stream. Verified by inspection: this race only matters when subscriber_count transitions through 0 between the HTTP teardown and the POST, which requires both viewers' tabs to close in lockstep — practically unobservable. **Tests.** New `test_stop_camera_stream_skips_shutdown_when_subscribers_remain` in `test_camera_api.py` patches `get_subscriber_count` to return 2 and asserts `/camera/stop` returns `{stopped: 0, skipped: true}`, does NOT call `shutdown_broadcaster`, and does NOT terminate any `_active_streams` ffmpeg process. The existing 6 stop-route tests stay green because they don't pre-populate subscribers — `get_subscriber_count` returns 0, the early-return doesn't trigger, and the existing force-teardown still runs. Full `test_camera_api.py` 43/43 green. `ruff check backend/` clean. Frontend `npm run build` clean. **Scope.** No API contract change — the existing `{"stopped": int}` shape is preserved, the new `"skipped"` field is additive. No new permission. No DB migration. No i18n change.
- **Cam Wall: per-tile print/printer status overlay** — Cam-wall tiles now surface live printer state on top of the camera image instead of being a pure video grid. A new gear-menu toggle `Status overlay` switches between `Off`, `Compact`, and `Full` (default `Full`). **Compact** paints a colour-coded state chip in the top-left corner — `Printing` / `Paused` / `Finished` / `Error` — bucketed using the same `classifyPrinterStatus` rules that drive the printer-card badges, with `Idle` deliberately suppressed so a wall of cold printers stays visually quiet. **Full** adds a bottom info strip on tiles whose state is `Printing` or `Paused`: the active file's `subtask_name ?? gcode_file`, the rounded progress percent, `Layer N/M` when both are known, and the remaining time formatted by the existing `formatDuration(remaining_time * 60)` helper from `utils/date.ts` — so the numbers match what the printer card shows for the same printer. When the printer's known HMS errors are non-empty (filtered via the existing `filterKnownHMSErrors` from `HMSErrorModal`), the chip flips to the red `Error` colour with a `lucide-react` `AlertTriangle` icon inline. The whole overlay layer is gated by `connected` — disconnected and paused-mode tiles render the existing offline / paused placeholders unchanged. **Zero new network cost.** `CameraWall.tsx` already ran `useQueries({ queryKey: ['printerStatus', id], ... })` against every printer for the connected flag; the patch widens the `useMemo` to expose the full `PrinterStatus` payload and threads `state`, `progress`, `remaining_time`, `layer_num`, `total_layers`, `subtask_name`, `gcode_file`, and the filtered HMS error count into each `CameraTile` — same shared React Query cache the `PrinterCard` flow populates, so Cards ↔ Cam Wall flips remain instant and the wall opens no second status fan-out. **Settings.** Per-user, persisted in `localStorage` under `camWallStatusMode` alongside the existing `camWallMaxLive` and `camWallSnapshotSec` keys. The picker is a three-segment button row inside the existing cam-wall settings popover (gear icon, click-outside dismiss), labelled `Off` / `Compact` / `Full`. Default `Full` because the cards already show this info — users who pick cam-wall view still want to glance the same details without flipping back. **CameraTile contract.** All new props (`statusMode`, `printerState`, `progress`, `remainingMin`, `layerNum`, `totalLayers`, `printName`, `hmsErrorCount`) are optional with safe defaults, so the 5 existing vitest cases in `CameraTile.test.tsx` continue to pass unmodified — the status layer is purely additive on the leaf component. The state-bucket classifier lives co-located in `CameraTile.tsx` (mirrors `PrintersPage.classifyPrinterStatus` for `RUNNING/PAUSE/FINISH/FAILED`) so the tile renders correctly even if called outside the cam-wall scheduler. **Temperatures intentionally not surfaced.** Nozzle / bed / chamber readouts would crowd the tile and overlap the existing top-right LIVE/SNAP/OFF mode indicator and bottom-edge printer name; the printer card remains the canonical surface for those. **i18n.** 7 new keys under `printers.camWall` (`layer`, `timeLeft`, `statusMode.{off,compact,full}`, `settings.statusOverlay`, `settings.statusOverlayHint`) translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW) — no English fallback. State chip labels reuse the existing `printers.status.{printing,paused,finished,error,idle}` keys so no new translation work was needed for the bucket vocabulary. Parity script `check-i18n-parity.mjs` adds two legitimate-cognate exceptions: `Compact` for French (same word) and `Off` for Italian (universal loanword); both remain real translations in every other locale. Parity check 5388 leaves per locale. **Scope.** No backend change. No new request. No new permission. No DB migration. The toggle defaults to `Full`, so installs see the overlay the first time they open Cam Wall — flipping to `Off` reverts to the original camera-only behaviour.
- **Cam Wall view on the Printers page** — New view toggle next to the card-size selector flips the entire printers list into a responsive grid of live camera tiles (`Cards` ↔ `Cam wall`). Reuses the existing per-printer FTP / RTSPS proxy on `/api/v1/printers/{id}/camera/stream`, so the backend ffmpeg fan-out is the same one EmbeddedCameraViewer already drives — no new server-side state machine. Bandwidth ceiling matters on the RPi installs ([[bambuddy-install-base-2026-06-20]] documents that the median deployment is a Pi 4): each live tile is one TLS pull + one MJPEG fan-out. To stay sustainable on a Pi 4 with 8+ printers, only the tiles currently on-screen are live, and only up to `Max live streams` (default 4) at any moment — everything else falls back to per-tile snapshot polling against `/api/v1/printers/{id}/camera/snapshot` at a configurable interval (default 8 s). Tiles that scroll off-screen pause entirely. **Architecture.** `frontend/src/components/CameraTile.tsx` is the leaf — three modes (`live` / `snapshot` / `paused`), a single `<img>` element with `loading="lazy"`, an `onError` no-signal fallback, and a `useEffect` cleanup that POSTs `/camera/stop` (with `keepalive: true`) on mode-out-of-live AND on unmount so the backend releases the transcoder slot. Same `/camera/stop` discipline EmbeddedCameraViewer uses, so a tile that scrolls off the wall is byte-identical to closing a floating viewer. `frontend/src/components/CameraWall.tsx` is the scheduler — an `IntersectionObserver` (threshold 0.4 to avoid flicker at scroll boundaries) tracks visibility, then a `useMemo` walks the printer list in sort order and assigns the first N visible tiles to `live`, the rest of the visible set to `snapshot`, and off-screen tiles to `paused`. The walker is stable on a given render (no LRU eviction churn) which avoids the "tile flickers between live and snapshot every frame" failure mode. Reuses the same `['printerStatus', id]` React Query cache each `PrinterCard` already populates, so flipping between Cards and Cam Wall is instant and the wall doesn't open a second status fetch fan-out. Clicking a tile honours the existing `Settings → camera_view_mode` preference — opens the floating `EmbeddedCameraViewer` when set to `embedded`, otherwise pops the `/camera/:id` window with the saved size/position from `cameraWindowState`. **Settings.** Both knobs are per-user, persisted in `localStorage` (`camWallMaxLive`, `camWallSnapshotSec`) — not a global backend setting, since a Pi 4 user and a NUC user looking at the same install want different caps. Bounded `[1, 16]` for max live and `[2, 60]` seconds for snapshot interval, both rendered as an inline gear-icon popover above the grid with click-outside dismiss. The Cam Wall button is permission-gated on `camera:view`; viewers without the permission see it disabled. The card-size selector goes opacity-40 + pointer-events-none in cam-wall mode (tile size is governed by the responsive grid, not the cardSize knob). **i18n.** 13 new keys (`printers.pageView.cards`, `printers.pageView.camWall`, `printers.camWall.{noPrinters,noSignal,live,snap,off,summary}`, `printers.camWall.settings.{title,maxLive,maxLiveHint,snapshotInterval,snapshotIntervalHint}`) translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW) — no English fallback. Parity check 5369 leaves per locale. **Tests.** 5 new vitest cases in `frontend/src/__tests__/components/CameraTile.test.tsx` cover live URL emission with `fps=8`, snapshot URL emission with the cache-bust counter advancing on the interval, offline placeholder for disconnected printers, paused placeholder rendering, and the `/camera/stop` POST firing when the tile transitions out of live. **Scope.** No backend change. No DB migration. No new permission. The existing `EmbeddedCameraViewer` is untouched — Cam Wall is purely additive. The `printerPageView` toggle defaults to `cards`, so installs see no behaviour change until a user picks Cam Wall.
- **AMS drying badge now shows the active cycle's filament + target temperature** — During an active drying cycle the AMS card on the printers page renders `Drying · PETG @ 65°C · 11h 35m left` (the loaded-filament line under the slots) instead of the bare `Drying · 11h 35m left`. Bambu's per-tick AMS push only carries the `dry_time` countdown — the chosen filament name and target temperature are never echoed on the wire, so the badge had no source of truth for them. `BambuMQTTClient.send_drying_command(mode=1, ...)` now caches `{ams_id: {filament, temp}}` on the client; the cache is cleared on `mode=0` and on the per-AMS `dry_time` falling-edge to 0 (same detector that drives the smart-plug-after-drying callback). `PrinterManager.get_drying_targets(printer_id)` exposes it, `printer_state_to_dict` and `routes/printers.py::get_printer_status` thread it onto each AMS dict as `dry_target_temp` + `dry_filament`, the AMS schema gains both fields, and the AMS-HT compact badge gets the same render. Falls back to the first loaded tray's `tray_type` + RFID-recommended `drying_temp` when no cached target (drying started before backend launch, backend restarted mid-cycle, or cycle started from another source) — the same heuristic the popover already uses to seed defaults. New i18n key `printers.drying.targetSummary` = `{{filament}} @ {{temp}}°C`, translated in all 11 locales (parity check 5356 leaves per locale). 5 new backend tests in `TestSupportsDryingCommand` (cache populated on mode=1, overwrite on second start, cleared on mode=0, per-AMS isolation across stop) and 4 new tests in `TestDryingTargetExposure` (cached target wins over fallback, fallback derives from loaded tray, both fields None when no cache + empty trays, targets don't leak across AMS ids). **Note about Bambu's printer display.** A user reported that with PLA loaded in AMS-A slot 1 and a Bambuddy-initiated PETG @ 65°C drying cycle, the H2D's own screen showed "PLA" — Bambuddy's wire payload was confirmed correct via journalctl (`filament: "PETG"` sent, `result: success, filament: PETG, temp: 65` ACKed back). The display behaviour is the Bambu firmware labelling the active cycle by the loaded tray's filament rather than the `filament` field of the command. This Bambuddy change makes our own UI reflect what we actually sent, independent of the firmware's display choice.
- **Continue auto-drying while a print is running on capable hardware** — Bambu shipped "Print While Drying" firmware-side on H2D (01.03.00.00+), H2C / H2S / P2S / H2D Pro (01.02.00.00+), X2D / A2L (01.01.00.00+), and X1C (01.11.02.00+). The existing Queue Auto-Drying loop only fires on idle printers — when a print starts, drying stops or never starts, even though the spools may still be wet. New **Settings → Print Queue → "Continue drying while printing"** toggle (default OFF) lets the same scheduler evaluator also run on the *busy* printer set. Backend: `supports_drying_while_printing(model, firmware)` in `printer_manager.py` is a strict allowlist verified against Bambu's wiki release-notes phrasing ("printing while filament is drying" / "Print While Drying" — every matrix-confirmed model carries that wording verbatim; **P1P / P1S / A1 / A1 Mini / X1 (non-C) / X1E are intentionally excluded** because the wiki is silent for them, and on those models the firmware would reject the command anyway via `dry_sf_reason=[0]` (TaskOccupied)). The capability is gated on both display names (`"H2D"`, `"X1C"`, ...) and internal SSDP / MQTT model codes (`"O1D"`, `"O1E"`, `"O2D"`, `"O1C"`, `"O1C2"`, `"O1S"`, `"N6"`, `"BL-P001"`, `"N7"`, `"N9"`) — the printer's `model` field can carry either, the existing `supports_drying` precedent uses both. `_check_auto_drying` in `print_scheduler.py` now resolves model + firmware up front for every printer and computes `mid_print = busy AND toggle_on AND supports_drying_while_printing`; when `mid_print` is True the busy-skip, queue-only-skip, and idle-skip gates are bypassed and the existing humidity / `dry_sf_reason` / drying-presets / mode-1 send path takes over. **Safety: drying temp is capped at `max(40, preset_temp - 5)` for mid-print drying** — Bambu's own release notes for H2D and P2S spell out "Lower drying temperature during printing" / "The drying temperature must not exceed the filament's softening temperature", so a 5 degC offset from the idle preset (floor 40) protects spools inside a hot enclosure during an active print. The early-return guard that short-circuits the evaluator when "only queue mode is on AND nothing scheduled" was also extended to skip the short-circuit when `print_drying_enabled` is on — otherwise busy printers would never be reached. The manual drying button on the AMS card needs no UI change: `routes/printers.py::start_drying` has no Bambuddy-side `is_idle` gate; the "printer busy" rejection comes from firmware `dry_sf_reason=[0]`, which simply won't appear on supported firmware mid-print. The new capability flag is also surfaced on `PrinterStatus.supports_drying_while_printing` so the frontend can light up the AMS card affordances correctly. **Settings.** New `print_drying_enabled: bool = False` in `schemas/settings.py`, added to the boolean allowlist in `routes/settings.py` (`_BOOL_KEYS`), and threaded through the existing dirty-detection / save call in `SettingsPage.tsx`. **i18n.** 2 new keys (`settings.printDryingEnabled`, `settings.printDryingEnabledDescription`) translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5354 leaves per locale, no English fallback. **Tests.** 7 new cases in `TestSupportsDryingWhilePrinting` cover every supported display name + internal code, below-min firmware, excluded models (`P1*`, `A1`, `A1 MINI`, `X1`, `X1E`), missing firmware, `None` model, case-insensitivity, and the strict unknown-model default (False — unlike `supports_drying` which leniently allows unknowns). 4 new scheduler integration cases in `TestMidPrintDrying` cover: toggle ON + capable hardware fires drying at the 40 degC cap for PLA, PETG caps to 60, toggle OFF still skips busy printers, and toggle ON with too-old firmware / excluded model still skips. Full `pytest -n 30` green (4251/4251 in 49 s). Backend `ruff` clean. Frontend `npm run build` clean. **Scope.** No DB migration. No new permission. The new toggle is opt-in (default OFF) — existing installs see no behaviour change until a user enables it, and the firmware is the ultimate arbiter via `dry_sf_reason` so being too permissive here costs nothing.
- **Batch / mass edit on the Filament tab (#1795, requested by @RoBoT24-web)** — Bulk operations land on the Inventory page in both built-in and Spoolman modes. Reporter wanted "ten of the same spool, set a pressure advance value, save once" — the existing flow forced ten round-trips through the per-spool editor. **Frontend.** A new checkbox column anchors the leftmost slot of every row in the table view (header checkbox toggles every visible row; group rows expose a single checkbox that selects every member). As soon as one row is selected, a sticky toolbar appears above the list with **Edit / Print labels / Reset usage / Archive (or Restore in the Archived tab) / Delete / Clear selection**. The selection clears automatically on any filter or tab change so the toolbar count can never drift from what's on screen. A new `BulkEditSpoolsModal` is the entry point for the bulk-edit action: a three-state-per-field form (untouched / set-to-value) over the flat spool attributes — material, subtype, brand, color name + RGBA, storage location, slicer filament name + ID, cost / kg, note, label weight, core weight, category, low-stock threshold %. The reporter's pressure-advance use case (K-profile) stays per-spool because K-profiles are scoped per `(printer, extruder, nozzle_diameter)` and bulk-applying a single K-value across heterogeneous printers would create wrong calibration — they're handled in the existing per-spool K-profile editor instead. **Clearing fields in bulk is intentionally NOT supported** (user decision on #1795): bulk-set lets you only WRITE non-empty values; emptying ten notes by mistake is a one-click disaster the dialog doesn't expose. The per-spool editor remains the path for clearing. **Same dropdown controls the per-spool editor uses.** Material, sub-type, brand, category, slicer preset name, and slicer filament are all rendered through a new `SearchableSelect` component matching the per-spool form's pattern (text input + chevron + filtered list of buttons, click-outside + Escape close). No native `<select>` anywhere in the modal. Material / sub-type / brand options merge the canonical `MATERIALS` / `KNOWN_VARIANTS` / `DEFAULT_BRANDS` constants from `spool-form/constants.ts` with whatever's already in inventory. Slicer-preset dropdowns fetch the same sources as the per-spool form (Bambu Cloud presets when signed in, Orca Cloud profiles, local presets, built-in filaments) via three `useQuery` calls gated on `isOpen` so closed modal pays no fetch cost; results pipe through the shared `buildFilamentOptions(...)` helper so the option list is byte-identical to what the per-spool editor shows. Storage location is a `searchableClosed` SearchableSelect over actual `api.getLocations()` rows mapped to `location_id` (the FK), matching the per-spool form's behaviour (rather than the legacy free-text `storage_location` column, which would have written to a different column than the per-spool editor). **Backend.** Four new endpoints per inventory mode, eight total: `POST /api/v1/inventory/spools/bulk-update`, `bulk-delete`, `bulk-archive`, `bulk-restore` (built-in) and the matching `/api/v1/spoolman/inventory/spools/bulk-*` (Spoolman). All gated on the existing `INVENTORY_UPDATE` / `FILAMENTS_UPDATE` permissions used by the per-spool routes. The built-in update endpoint runs the same `prepare_internal_spool_payload(...)` path as the per-spool PATCH (location resolution, weight-lock auto-stamp on explicit `weight_used` — both inherited identically). The Spoolman update endpoint loops the existing per-spool `update_spool` route function so the complex filament re-linking / extra-dict / extra-lock / shared-filament-detection rules stay byte-identical to single-spool edits — the bulk route is just a fan-out, not a parallel reimplementation. Per-spool failures inside the loop are collected and returned as `{updated, errors: [{id, status, detail}]}` so one bad ID never aborts the batch. The built-in archive endpoint reports `{archived, already_archived, not_found}` so the UI can distinguish "no-op because already archived" from "missing row." Both modes broadcast a single `inventory_changed` WS event at the end of the batch instead of one per row, so the table refresh is a single re-fetch. **Spoolman bulk-delete / archive / restore now also catch non-HTTPException mid-batch** — earlier these three caught only `HTTPException`; a mid-batch `httpx.ConnectError` / `TimeoutError` / `KeyError` aborted the route with a 500, the loop's accumulated state was lost, and the `inventory_changed` broadcast was skipped so the table didn't refresh past the partial state. `bulk_update_spools` got this right out the gate; the audit pass added the same `except Exception` arm to the other three so a transient Spoolman blip surfaces in the per-row errors array instead of obliterating the whole batch. **All-failed and partial-failure are surfaced to the user.** The first cut of the four `onSuccess` mutation handlers only read the success count, so a response of `{updated: 0, errors: [50 entries]}` (e.g. every selected ID was deleted by another user before the click landed) showed a green "0 spools updated" toast and silently cleared the selection. The handlers now branch on three outcomes — all-succeeded (existing success toast), partial (`{ok, failed}` warning toast), and all-failed (red error toast + selection preserved + modal stays open so the user can retry). Same shape for delete / archive / restore. **`bulkResetConsumedCounterMutation.onSuccess` now closes the confirm modal + clears the selection** — earlier inconsistency with the other three bulk mutations left the confirm dialog open after the action. **Invalid RGBA hex is now flagged inline** instead of being silently dropped from the patch. Typing "RED" or "FF00" in the colour field now paints the input red with helper text and disables the Apply button via a new `hasDroppedTickedField` guard that detects any ticked field whose value gets normalised away — without this guard the user clicked Apply, the rgba was silently omitted, and the success toast still fired for the other fields. **Backend tests.** 17 new integration cases. 10 in `test_inventory_bulk.py` covering update applying to multiple rows, unknown IDs reported in `not_found`, empty update body rejected with 400, weight-lock auto-stamp parity with per-spool PATCH, empty `ids` rejected with 422, bulk delete with mixed valid/invalid IDs, archive setting `archived_at` on multiple rows + skipping already-archived, restore the symmetric inverse. 7 in `test_spoolman_inventory_bulk.py` covering the Spoolman update calling `update_spool_full` once per ID with the same payload, per-spool exception collected without aborting the batch (404 on one ID + 2 successes returns `{updated: 2, errors: [{id, status: 404, ...}]}`), empty update rejected, empty `ids` rejected, bulk delete fan-out, bulk archive calling `set_spool_archived(spool_id, archived=True)` for each ID, bulk restore the inverse. Full `pytest -n 30` green (6384/6384 in 68 s). **Frontend behaviour.** Selection state is per-page-session — leaving the Inventory tab and coming back clears the set, mirroring the existing label-printer scope. The action toolbar collapses into the existing `ConfirmModal` for destructive operations (Delete is `variant: 'danger'`; Archive / Restore / Reset usage are `'warning'`). Errors surface via the existing `useToast`. **API client.** Added `bulkUpdateSpools / bulkDeleteSpools / bulkArchiveSpools / bulkRestoreSpools` and the four `bulkXSpoolmanInventorySpools` equivalents — matches the per-mode pattern already used for `bulkResetSpoolConsumedCounter`. **i18n.** 42 new keys under the new `inventory.bulk.*` namespace (33 toolbar / modal / confirm + 4 partial-failure toasts × 4 actions + invalid-hex inline helper + 1 useCustom autocomplete affordance), translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5345 leaves per locale, no English fallback. **Scope.** No DB migration. No new permission. SQLite + Postgres parity verified — the bulk endpoints use the same model + ORM paths as the per-spool routes. Grid (card) view does NOT get checkboxes in this drop — the reporter explicitly requested the Filament-tab list (table view); adding card checkboxes can ship as a follow-up if asked.
- **Spoolman weight tracking for no-3MF "Untitled" prints (#1820, requested by @ojimpo)** — Closes a long-standing parity gap between Bambuddy's two inventory modes. When a Bambu print starts that Bambuddy can't fetch a `.gcode.3mf` for — typically an unsaved BambuStudio project, where the printer reports `subtask_name: 名称未設定` ("Untitled") and FTP returns 550 for every candidate path — the existing flow created a fallback archive but Spoolman saw no weight change for that print. The internal-inventory side already handles this via the Path 2 AMS remain%-delta fallback in `usage_tracker.on_print_complete` (line 517). Spoolman now mirrors the same shape. **`store_print_data`** now captures `tray_remain_start` (per-slot `remain%` + `tray_uuid` at print start) on every print — keyed `"<ams_id>-<tray_id>"`, slots with invalid `remain` (e.g. -1, AMS hasn't read the spool yet) silently dropped, VT external trays encoded as `ams_id=255` to match internal — and no longer early-returns when the 3MF is missing: it creates an `ActivePrintSpoolman` row with `filament_usage=None` carrying only the snapshot, so the completion path has something to work with. **`report_usage`** keeps its 3MF path as the primary writer and adds `_report_remain_delta_for_slots` for any slot the 3MF path didn't cover (no-3MF entirely OR partial coverage where slice_info omitted a slot). The fallback resolves each slot to its Spoolman spool via the existing `spoolman_slot_assignments` table, looks up the curated `Filament.weight` from the spool's filament record, and writes `(start_remain - current_remain) × weight / 100` grams via `client.use_spool(...)`. **No `tray_weight` from MQTT** — the failure mode #1119 documented (non-RFID spools have no MQTT `tray_weight`, so remain% × tray_weight gave garbage and silently mis-tracked) is dodged the same way internal inventory dodges it: by reading the user-curated reference weight from the inventory store rather than trusting MQTT's raw field. RFID gate not needed — Spoolman's curated `Filament.weight` is present for RFID and non-RFID spools alike. **Mid-print spool swap detection** — when `tray_uuid` differs between start snapshot and completion read, the slot is skipped rather than mis-attributed. We don't know how much of the print went to which spool; preserving correctness is better than guessing. **Double-charge guard** — slots already written by the 3MF path land in a `handled_global_tray_ids` set that the fallback consults before charging, so a 3MF-covered slot can't also pick up a remain delta. **#1119 invariant preserved** — the deprecated AMS-remain%-based GLOBAL writer is still gone. This is per-slot, per-print, gated on a valid start/current `remain` AND a resolvable Spoolman spool. No new setting, no toggle: the parity rule [[feedback_inventory_modes_parity]] applies — same shape as internal inventory, which is unconditional. **No-op default** — installs with no Spoolman slot assignments, no RFID-readable AMS, or no print-time remain% (printer offline at start, AMS still loading) see no behaviour change. **DB.** `active_print_spoolman` gets a new nullable `tray_remain_start TEXT` column via `_safe_execute(ALTER TABLE … ADD COLUMN)`, and the existing `filament_usage TEXT NOT NULL` is relaxed to nullable — for SQLite via `writable_schema = ON` + `sqlite_master` patch + `schema_version` bump (same surgical pattern used for `users.password_hash` NULL relaxation a few hundred lines below), for Postgres via `ALTER COLUMN … DROP NOT NULL`. SQLite + Postgres parity verified. CREATE TABLE updated to emit the new shape on fresh installs. **Tests.** 11 new unit cases in `test_spoolman_no3mf_remain_fallback.py`: 5 for `_snapshot_tray_remain` (valid remain captured, invalid remain skipped, VT tray encoding, empty raw_data, missing uuid defaulted to ""), 3 for `store_print_data` no-3MF behaviour (row created with snapshot when no 3MF + valid remain; no row when neither 3MF nor remain; 3MF path also captures snapshot for partial-coverage fallback), 3 for `report_usage` remain-delta (writes `(start-end) × Filament.weight / 100` to resolved spool; skips swapped spool when `tray_uuid` changed; skips slots already handled by 3MF). Full `pytest -n 30` green on the Spoolman + tracking + archive + on-print suites (1205/1205). Backend `ruff` clean.
- **NTP-gate state exposed on the appliance endpoint** — `GET /api/v1/system/appliance` gains a `time_synced` field returning `"ok"`, `"warning"`, or `null`. Source: `/run/bambuddy/time-synced`, written by the appliance's `ntp-gate.sh` once chronyd reports sync (or after a 3-minute timeout with a `"warning"` marker). The RPi 5 has no battery-backed RTC, so on a fresh boot the system clock is wrong until NTP catches up — JWT expiries and TLS certificate validity windows depend on this being right. New `backend/app/core/local_config.py::read_ntp_gate` is defensive on every failure mode (file absent → `None`, OSError → `None` + warning log, empty / unknown content → `None`, binary garbage survives via `errors="replace"`). The endpoint stays no-auth; the SPA can use the field to render a "time not synced" badge on a fresh appliance before swapping to normal status once `"ok"` comes through. 8 new unit cases for `read_ntp_gate` (absent / ok / warning-suffixed / warning-only / empty / unknown-marker / leading-whitespace / binary-garbage) and 3 new integration cases for the endpoint field (ok / warning / absent). On Docker / manual installs the gate file doesn't exist so this is a no-op (`time_synced` is `null`) — the appliance is the only consumer for now.
- **Appliance locale defaults endpoint** — `GET /api/v1/system/appliance` returns the hostname/timezone/locale the Bambuddy Appliance setup wizard collects into `/etc/bambuddy/local.toml` during firstboot. New `backend/app/core/local_config.py::read_local_toml` parses the file defensively (missing file → empty dict, invalid TOML → empty dict + warning, non-string values dropped with a warning), so a malformed file never blocks startup. Endpoint returns `{hostname, timezone, locale}` with `null` for any field not present, requires no auth (the frontend i18n bootstrap fetches it before auth might be set up, and the contents are user-set defaults, not secrets). On the frontend, `i18n/index.ts` runs a one-shot `applyApplianceLocale()` hook after init: gated by a `bambuddy_appliance_locale_consumed` localStorage flag so it runs exactly once per appliance, fetches the endpoint, and `i18n.changeLanguage(...)`s if the returned locale is in the supported set. Non-appliance installs (Docker, manual) silently no-op when the file or endpoint is absent. The appliance writes the file via its setup wizard (separate repo: `bambuddy-appliance`); this PR closes the loop for the locale field — hostname and timezone are still applied by the appliance's firstboot.sh via `hostnamectl`/`timedatectl` and don't need a main-app reader. Backend test coverage: 9 unit cases for the reader (missing/empty/comment-only/full/partial/invalid/non-string/unknown-keys/escaped-quotes), 4 integration cases for the endpoint (nulls when no file, full values, partial values, no-auth-required).
- **Unified print dispatch through the queue scheduler (#1625, by @EdwardChamberlain)** — Every print Bambuddy starts now goes through the print queue's scheduler rather than the standalone `background_dispatch.py` path that previously ran in parallel for File Manager prints, archive reprints, and printer-card upload-and-print. Same end-state (a print on the printer), one code path. **Effect on users:** every print is now queueable, cancellable, visible on the queue page, attributable to the user that started it, and runs through the existing filament-deficit check and print-queue ownership model. The "stealth print" that didn't show up in the queue because it bypassed the scheduler is gone. **Architecture.** File Manager **Print**, archive **Reprint**, and printer-card **upload-and-print** all now POST to the existing queue routes (`POST /api/v1/queue/items` with an immediate ASAP scheduled_time) — the scheduler picks it up on the next tick and runs the same dispatch path the existing queue used to. The retired `background_dispatch.py` route + `services/background_dispatch.py` worker + their two test files are removed. The scheduler already had every feature `background_dispatch` did (per-printer locking, status broadcast, error path) plus the deficit / ownership / queue-position machinery, so this is consolidation rather than a rewrite. **Permission scope changes.** Documented in the Security section below (#1625 introduced the `queue:create` requirement on File Manager / archive reprint / upload-and-print). **i18n.** New `queue.actions.startPrint` key added across all 11 locales (the FileManagerPage button's accessible-name on the new path). Parity check holds. **Tests.** All `background_dispatch` test files removed (the routes they covered no longer exist); `test_dispatch_force_timelapse.py`, `test_scheduler_force_timelapse_wiring.py`, and `test_cleanup_forced_timelapse.py` consolidated onto the scheduler since `force_timelapse` now lives there exclusively. **Followup #1625-followup (this drop, listed under Fixed below)** caught three issues from the post-merge audit — ownership gate mismatch on `/queue/{id}/start` and `/queue/{id}/stop`, an ASAP TOCTOU race on empty-scope inserts, and a missing duplicate-position validator on `/queue/reorder` — none of which were introduced by this PR but all of which became more impactful once every print routed through the queue. **Scope.** No DB migration. No new permission (`queue:create` already existed; this PR widens its surface). No frontend behaviour change for users with full permissions — the queue surface absorbs prints that previously skipped it.
- **HMS error actions — Resume / Stop / Check Assistant from the dashboard (#1743, by @Ichicoro, requested in #1419 by @Ichicoro)** — Bambu's HMS error dialog goes from read-only to actionable. The error modal on the printer card now renders the same Resume / Stop / Continue / Retry / Check Assistant / Don't Remind Me etc. buttons that BambuStudio and Bambu Handy show, and each click sends the matching MQTT command back to the printer. Closes the long-standing UX gap that forced users to physically walk to the printer (or open Bambu Handy) just to acknowledge a paused print. **Data source.** A bundled `backend/app/data/hms_actions.json` maps every known printer-model + error code to its list of allowable actions; populated from Bambu's public `e.bambulab.com/hms/GetActionImage.php` endpoint via `scripts/update_hms_actions.py`. The action-ID-to-name mapping (RESUME_PRINTING, CHECK_ASSISTANT, FILAMENT_EXTRUDED, …) matches BambuStudio's open-source enum verbatim — including the `CANCLE` typo, kept on purpose because Bambu's catalog spells it that way and silently fixing it would break the lookup. **Backend.** New `backend/app/services/hms_actions.py` defines an `HMSAction` `StrEnum` and `get_actions_for_error_code(device, error_code)` lookup; loaded once at module import via `Path(__file__).resolve().parent.parent / "data" / ...` so the JSON resolves regardless of CWD (systemd unit, Docker entrypoint, pytest from `backend/`). `BambuMQTTClient._parse_data` looks up the action list at HMS-parse time on both error sources — the structured `hms[]` branch and the per-print `print_error` short-code branch — and attaches it to `HMSError.actions` together with a `job_id` snapshot from `self.state.subtask_id` so the action survives a subsequent job change. New `POST /api/v1/printers/{id}/hms/execute-action` route (`HmsActionBody` schema; permission `PRINTERS_CONTROL`) dispatches the click. **Dispatcher (`BambuMQTTClient.execute_hms_action`).** A `match` statement maps each `HMSAction` to its MQTT command — `resume` / `stop` with `err`+`param=reserve`+`job_id` for the HMS-aware actions; `idle_ignore` with `type=0` (one-time) vs `type=1` (persistent) so Bambu's "Don't Remind Me" / "No Reminder Next Time" actually disable the warning across prints; `ams_control` with `param=done` / `resume` / `abort` for filament-load dialogs; bare `clean_print_error` (matches the existing `clear_hms_errors` shape — no leaked `print_error` body field); `clean_print_error` + `uiop` chained for `DBL_CHECK_OK`; `refresh_nozzle`, `buzzer_ctrl mode=0` (fire alarm), `auto_stop_ams_dry`, `close_air_filt` for the standalone actions. UI-only actions (`CHECK_ASSISTANT`, `JUMP_TO_LIVEVIEW`, `OK_JUMP_RACK`, `REMOVE_CLOSE_BTN`, `LOAD_VIRTUAL_TRAY`, `CANCLE`, `DBL_CHECK_CANCEL`) intentionally publish nothing — they exist for label parity with BambuStudio's modal where the printer's own screen drives them. Unknown actions fall through to `return False` + warn log so the route surfaces them as 4xx rather than silently no-opping. Every command pairs with a `pushing.pushall` echo so the state stream refreshes on the next tick and the modal closes correctly. **Schema hardening.** `HmsActionBody.print_error` validated as `min/max_length=8` + `pattern=r"^[0-9A-Fa-f]{8}$"`; `action` and `job_id` length-capped. Stray input can't reach the dispatcher's `match`. **Frontend.** `HMSErrorModal.tsx` renders a wrap-flex row of buttons under each error description, sized to fit on the printer-card panel without overflowing on narrow viewports. The mutation calls the new endpoint, invalidates the printerStatus query, and shows the new `hmsErrors.actionSuccess` / `hmsErrors.actionFailed` toast. The button label is the translated action name from `hmsErrors.actions.<ACTION_NAME>` — never the raw enum — so a forgotten translation falls back to the English action name rather than a key string. **i18n.** 33 action labels + 2 toast keys translated in all 11 locales (`de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW`). No English fallback per [[feedback_translate_dont_fallback]]. Parity check 5381 leaves per locale. **Tests.** 31 new cases in `test_hms_actions.py` — 5 catalog-lookup (known A1 error returns actions; unknown device → empty; unknown error → empty; underscore-form `0300_8070` doesn't match the catalog's no-separator key; enum StrEnum value contract holds including the `CANCLE` typo) and 26 dispatcher cases that pin every `HMSAction` branch to its exact MQTT payload — resume carries err+param+job_id; `IGNORE_RESUME` / `NO_REMINDER_NEXT_TIME` use `idle_ignore type=0`; `IGNORE_NO_REMINDER_NEXT_TIME` / `DONT_REMIND_NEXT_TIME` use `type=1` (persistent variants — were incorrectly bucketed together in an earlier draft); `clean_print_error` body is bare; `DBL_CHECK_OK` chains clean + uiop_close; uiop's `err` is the already-string short code (not `f"{x:08X}"` against a str, which would TypeError); plain resume vs HMS-aware resume distinguished; UI-only actions publish nothing; unknown action returns False; `pushing.pushall` echo fires after every command. Full `pytest -n 30` green (6471/6471). Backend `ruff` clean. Frontend `npm run build` clean. **Scope.** No DB migration. No new permission. The HMS modal is opt-in by user click — installs with no HMS errors see no behaviour change. The 9009-line catalog is shipped as a single static JSON; regenerating it later is a `python scripts/update_hms_actions.py` run away.
- **Inline finish-photo embed in failure-event emails + `user_print_*` template disambiguation (#1792, reported by @elit3ge)** — Two related changes to the notification stack. **(1) Template-driven inline finish-photo in email.** Pushover / Telegram / Discord / ntfy users already get the finish-photo JPEG attached to terminal-print notifications (`print_complete` / `print_failed` / `print_stopped` event types), thanks to the capture path shipped in 0.2.5b1 (#1397) that extracts the last timelapse frame at print end and loads up to 2.5 MB into `archive_data["image_data"]`. Email was the one provider that dropped those bytes on the floor — text-only body, no visual context for the reporter's "Reason: unknown" failure mails. `notification_service._send_email` (`backend/app/services/notification_service.py:413`) now accepts `finish_photo_url` alongside `image_data` and the dispatcher (`_send_to_provider` at `:745`) threads the URL from the rendered template variables dict. **Inline embed is opt-in via the existing `{finish_photo_url}` template variable** — first draft of this fix unconditionally inlined the photo whenever bytes were present, which @maziggy correctly flagged as bypassing the template system ("standard is to have variables for all available items in a template"). The contract now: if the user puts `{finish_photo_url}` in their email template body, the URL substring in the rendered body triggers the multipart/related shape — HTML part replaces the escaped URL in-place with `<img src="cid:bambuddy-finish-photo">` (so the image appears WHERE the variable was, not stapled to the bottom), plain-text part keeps the URL as a clickable link, MIMEImage attached inline with `Content-ID: <bambuddy-finish-photo>` per RFC 2392. If the template doesn't reference the variable, single-part text-only — no surprise image. Default templates are unchanged; reporter (and any user who wants this) edits their `print_complete` / `print_failed` / `print_stopped` body once to add the variable. XSS hygiene: rendered body is `html.escape`d before the URL→`<img>` swap, newlines become `<br>`. Pushover/Telegram/Discord/ntfy senders untouched — their pre-existing "auto-attach whenever `image_data` is set" behaviour stays because their bodies aren't HTML-templatable for inline images anyway. **(2) `user_print_*` template names get an " Email" suffix.** Same reporter surfaced a separate confusion: the Message Templates list showed "Print Completed" and "User Print Completed" side-by-side with no cue they're different dispatch paths — the first is a provider-level broadcast to whatever notification channels the admin configured (ntfy/pushover/telegram/discord/email/webhook/homeassistant), the second is a per-user SMTP-only email to the user who submitted the job (requires advanced auth + `user_notifications_enabled` toggle + user has email + per-user pref opt-in). The `EVENT_NAMES` display map in `backend/app/api/routes/notification_templates.py:51` already used the disambiguated "User Print Completed Email" label, but the seed wrote the short name to the DB, so the UI rendered the ambiguous one. Fresh installs now get the suffixed name straight from `DEFAULT_TEMPLATES` (`backend/app/models/notification_template.py:198+`). Existing installs get the rename via a new `_migrate_rename_user_print_template_names` (`backend/app/core/database.py:3081+`) that runs on startup and updates rows for the four `user_print_*` event types WHERE the name still matches the old default — admin-edited names are preserved. Standard SQL UPDATE works on both SQLite and Postgres without dialect branching. **Tests:** 6 new `TestEmailProvider` cases in `backend/tests/unit/services/test_notification_service.py` pinning the template-driven contract (no-image-no-URL → text-only, image-without-template-reference → STILL text-only, URL-in-body + bytes → multipart/related with cid, URL-arg-missing → text-only defence-in-depth, body-escape hygiene, URL→`<img>` in-place swap). 5 new migration cases in `backend/tests/unit/test_user_print_template_rename_migration.py` covering default-rename, user-edited preservation, provider-template don't-touch, second-run idempotency, empty-table fresh-install no-op. 11/11 + 140/140 adjacent notification tests green. Ruff clean. **Verified end-to-end** against a real SMTP provider with a real 48 KB finish-photo JPEG — Gmail rendered the inline image where the URL marker was in the body.
- **Dedicated "AI Failure Detection" notification event (#1794, reported by @maziggy from a user report)** — Obico failure detection now fires its own notification event (`on_ai_failure_detection`) instead of riding the multiplexed `on_printer_error` toggle. Reporter (P1S, Discord provider) had Obico enabled with `obico_action=notify`, detection was firing correctly per the logs, every other Discord notification was working — but spaghetti detections never reached Discord. **Root cause.** `obico_actions._notify` at `obico_actions.py:75` was calling `notification_service.on_printer_error(..., error_type="ai_failure_detection")`. The notification service's provider filter at `notification_service.py:722-725` requires the SUBSCRIBED-event boolean column to be True; the `on_printer_error` column defaults to False; the reporter's Discord provider was created without explicitly enabling Printer Error. The user couldn't have found the right toggle even if they'd known to look — the UI labels it "Printer Error" with no hint that flipping it also subscribes to AI detection. The same toggle multiplexed three distinct events (HMS hardware errors at `main.py:1248` + Obico spaghetti + a `error_type="ai_failure_detection"` discriminator passed in the variables payload), so a user who wanted spaghetti alerts but not chamber-fan-stalled HMS pages had no way to express that. **Fix.** New `on_ai_failure_detection` Boolean column on `notification_providers` (defaults False — matches the conservative default of every other opt-in event); new `notification_service.on_ai_failure_detection(printer_id, printer_name, task_name, confidence, action, db, image_data)` method following the exact shape of `on_printer_error` (mirrors variable handling, template fan-out, provider filter, fail-open under quiet-hours / digest); new `ai_failure_detection` template entry seeded by `seed_notification_templates` with variables `{printer}`, `{task_name}`, `{confidence}`, `{action}`. The seeder only adds templates whose `event_type` is missing, so existing installations get the new template on next start without clobbering customised ones. `obico_actions._notify` swapped to the new method. **Migration.** Branched SQLite (`DEFAULT 0`) vs Postgres (`DEFAULT false`) per the existing stock-alert migration shape at `database.py:2750` — Postgres rejects `DEFAULT 0` for BOOLEAN columns. Existing providers receive the column with the conservative False default; they continue NOT receiving Obico notifications UNTIL they explicitly toggle the new "AI Failure Detection" event ON. This is the intended UX: previously the toggle was on `Printer Error`, which the reporter had OFF, so today they get nothing; after this change they still get nothing until they opt in via the dedicated toggle, but now they can find the toggle without trial-and-error. **Frontend.** New toggle row in `NotificationProviderCard.tsx` (between Printer Error and Low Filament) with a description line "Notify when Obico AI detects a possible print failure" so users discover the link to Obico without having to read source. New summary badge ("AI Failure Detection" in fuchsia) in the collapsed card view so admins can see at a glance which providers route AI alerts. New toggle in `AddNotificationModal.tsx` Printer Status section with matching state hook (`onAiFailureDetection`) wired through the create + update payload. ntfy per-event priority block also picks up the new event when enabled, matching how Printer Error and the stock-alert events behave there. **Schema.** `NotificationProvider` model + `NotificationProviderBase`/`NotificationProviderUpdate` schemas + `_provider_to_dict` route serialiser + create route + PATCH route (the latter uses `model_dump(exclude_unset=True)` so it picks up the new field automatically). Frontend `NotificationProvider` type + the update-payload variant. **i18n.** Two new keys — `notifications.aiFailureDetection` (label) and `notifications.aiFailureDetectionDescription` (help text) — translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5242 leaves per locale, no English fallback. **Tests.** 4 new backend cases in `test_notification_service.py::TestAIFailureDetectionNotifications` (dispatch uses the new event field — NOT the legacy multiplexed one; provider with only `on_printer_error=True` is NOT notified — the regression guard for the reporter's symptom; variables include task_name + 2-decimal-formatted confidence + action; empty task_name falls back to "current job"). 3 new backend cases in `test_obico_actions.py` (`execute_action(action='notify')` calls `on_ai_failure_detection` and explicitly does NOT call `on_printer_error`; the `pause` action still pauses + notifies; notification-service exceptions are swallowed so a transient Discord blip can't kill the Obico detection loop). 5 new frontend cases — 4 in `NotificationProviderCardAiFailureDetection.test.tsx` (badge renders when ON; absent when OFF; toggle appears in expanded settings; toggling PATCHes the correct field and explicitly NOT `on_printer_error`) and 3 in `AddNotificationModal.test.tsx` (toggle renders in Printer Status section; save persists the new field without touching `on_printer_error`; ntfy priority block includes the event when enabled). Existing 87 `test_notification_service.py` + 52 Obico tests + 65 `NotificationProviderCard*` / `AddNotificationModal*` tests still green. Backend `pytest -n 30` clean; ruff clean; `npm run build` clean; ESLint clean. **Scope.** No change to HMS hardware-error notifications — `main.py::on_printer_error` callers still fire the `on_printer_error` event with `error_type` shapes like `"AMS Error"` / `"Heating Error"`, unchanged. The `on_printer_error` column stays on the table (default False, used for HMS only). Users who had it ON for HMS errors keep getting HMS notifications; what they LOSE is silent AI-failure dispatch on the same toggle, which most users with HMS-on never received anyway because `error_type="ai_failure_detection"` was the same value `obico_actions._notify` hardcoded. The full Obico action surface (`notify` / `pause` / `pause_and_off`) is unchanged on the dispatch side — `execute_action` still pauses + cuts plug power for `pause_and_off`; the only thing that moved is which notification-service method runs the fan-out.
- **Page-wide drag-and-drop upload on the File Manager (#1510, requested by @maikolscripts)** — File Manager gains the same drag-and-drop upload surface that the Archives page has had: drop any file anywhere on the page and the upload modal opens pre-populated with the dropped files, no need to click the **Upload Files** button first. The hardcoded `"Upload 3MF"` flow was the only path before this change. Unlike the Archives variant — which filters dropped files to `.3mf` only — the File Manager drop zone accepts whatever the upload modal itself accepts (3MF, STL, ZIP, images), so the page-wide surface is never more restrictive than the button it shortcuts. Permission-gated on `library:upload` so a viewer-tier user can't accidentally trigger the overlay. **Shared hook.** `frontend/src/hooks/usePageFileDrop.ts` is the new home for the drag-handler set — `isDraggingOver` state, `dragHandlers` to spread on the wrapper, optional `extensions` filter, optional `onRejected` callback for "you dropped something we won't accept" toasts, `disabled` flag for permission gating. Archives and File Manager both consume it; future drop-zones can opt in without re-implementing the cancel-safe logic. **`FileUploadModal.initialFiles` prop.** Modal accepts a `File[]` to pre-seed itself on first mount via a `seededInitialRef` guard so the same files don't re-add on subsequent renders. Existing manual-open paths (Upload Files button) pass nothing and behave unchanged. **i18n.** New key `fileManager.releaseToUpload` translated in all 11 locales (en: Release to upload, de: Loslassen zum Hochladen, es: Suelte para subir, fr: Relâcher pour téléverser, it: Rilascia per caricare, ja: 離してアップロード, ko: 놓아서 업로드, pt-BR: Solte para enviar, tr: Yüklemek için bırakın, zh-CN: 释放以上传, zh-TW: 釋放以上傳); existing `fileManager.dropFilesHere` reused. Parity 5240 leaves × 11 green, no English fallback. **Tests.** 13 new cases in `src/__tests__/hooks/usePageFileDrop.test.tsx` covering: overlay on dragenter, non-file payload ignored, child-element dragLeave keeps overlay (relatedTarget inside wrapper), outside-element dragLeave hides it, null relatedTarget hides it (cursor left window), document drop / dragend / Escape all reset (the three cancel paths the prior inline implementation missed — see the Fixed entry), drop with mixed file types filters by extension, onRejected fires when extension filter drops everything, disabled is a no-op, overlay clears on successful drop. Existing 85 cases across ArchivesPage / FileManagerPage / FileManagerExternalFolder vitest still green. ESLint clean; `npm run build` clean.
- **Sort Printers page by ETA (#1609, requested by @forgecrafttechnologies-source)** — The Printers page sort dropdown gains a fifth option, **ETA**, beside the existing **Name / Status / Model / Location**. Sorts the fleet by remaining print time so the printer that's finishing next sits at the top — the reporter's use case is staging the next job's filament ahead of time without scanning every card. **Tier ordering.** Tier 0 = currently printing with a known `remaining_time > 0`, sorted ascending by remaining minutes (soonest first); Tier 1 = currently printing without an ETA yet (post-`start_print` window before the slicer reports total time); Tier 2 = idle / finished; Tier 3 = offline. Tiebreaker within every tier is printer name, so two printers with the same ETA — or two idle printers — stay in a stable alphabetic order. The ascending / descending direction button still applies after tiers resolve, so descending puts offline printers at the top for operators triaging the fleet for connectivity issues. **Data source.** The cached `remaining_time` (minutes) on the per-printer status query (`['printerStatus', id]`) — the same field the per-card "ETA … min" label already reads from on `PrintersPage.tsx:3633` and the fleet-wide "next finish" badge already aggregates on `PrintersPage.tsx:996`. No new backend query, no new round-trip; the sort consumes data that's already in the React Query cache and updated on every WebSocket push. **No grouping.** Unlike `status` / `model` / `location` sorts (which group rows under section headers), the ETA sort renders a flat list — each printer's ETA is unique so grouping would just produce a header per row. **i18n.** New key `printers.sort.eta` translated in all 11 locales (en: ETA, de: Restzeit, es: Tiempo restante, fr: Temps restant, it: Tempo rimanente, ja: 残り時間, ko: 남은 시간, pt-BR: Tempo restante, tr: Kalan süre, zh-CN: 剩余时间, zh-TW: 剩餘時間), no English fallback. Parity check 5239 leaves per locale, green. ESLint clean; `npm run build` clean.
- **File Manager: user-authored tags for cross-cutting file filtering (#1268, requested by @zumik3-del, seconded by @unLieb)** — Third and final piece of #1268, shipped alongside the recursive-search + markdown-description-panel changes below. Folders are the hierarchy (every file lives in exactly one); tags are the orthogonal labels ("toy", "kid-safe", "petg-only", "failed twice", "gift") and a single file can carry as many as the user wants. Reporter wanted to find "every toy regardless of which folder it lives in" — folders alone can't do that without forcing files into one bucket. **Catalog model.** New `library_tags` table (id, name, name_key UNIQUE = `LOWER(TRIM(name))`, timestamps) holds the global tag catalog — one set per install, not per-user (matches the Locations PR #1505 from earlier in 0.2.5b1). `name_key` UNIQUE on a normalised key collapses "Toys" / "toys" / " TOYS " into a single row so users can't accidentally fragment the tag space by typing variations. New `library_file_tags(file_id, tag_id)` composite-PK association table with `ON DELETE CASCADE` on both sides — deleting a tag drops every chip from every file (files survive); deleting a file drops its tag links (catalog rows survive). Both tables auto-create via `Base.metadata.create_all()` at init — no explicit `run_migrations()` step needed since they're greenfield. **API.** New `/library/tags` router (`backend/app/api/routes/library_tags.py`) with `GET` (list + per-tag `file_count` projected via subquery; filtered by ownership for `LIBRARY_READ_OWN` users so chip counts match what they'd actually see), `POST` (create — strips whitespace, 409 on case-insensitive dup with both pre-check AND post-commit IntegrityError catch for race safety), `PATCH /{id}` (rename, same 409 rules, self-rename allowed via id-exclusion in the pre-check), `DELETE /{id}` (cascade), and `POST /library/tags/bulk-assign` for multi-file ops. Bulk-assign supports three actions: `add` (idempotent — re-applying doesn't 409, just no-ops for pre-existing pairs, count reports what actually changed), `remove`, and `replace` (strip everything currently on the listed files, then INSERT the new set — passing empty `tag_ids` with `replace` clears the file's tag set entirely). Per-file ownership enforced for `LIBRARY_UPDATE_OWN` users via a pre-filter on `file_ids` (silently drops files the caller can't update — same posture as `library_trash` bulk routes; the response counts reflect what actually happened so the UI can detect partial application). Unknown `file_ids` (race with a deleter, stale FE selection) are silently dropped instead of 404'ing the whole call. **`list_files` extension.** New `tag_ids: list[int]` query param on the existing `/library/files` route — repeated `?tag_ids=N&tag_ids=M` style. AND semantics: JOIN the association, `GROUP BY file.id HAVING COUNT(DISTINCT tag_id) = len(tag_ids)`, portable across SQLite and Postgres. Per the design discussion, the tag filter **intentionally bypasses folder scoping** (`folder_id` / `project_id` / `include_root` / `recursive` are all skipped while `tag_ids` is non-empty) — the whole point of tags is cross-cutting "every file matching these labels regardless of where it lives". Every file in every listing response now carries `tags: list[{id, name}]` via `selectinload(LibraryFile.tags)` so chip rendering on the FE is N+1-free. **Frontend — `LibraryTagsModal`.** Catalog CRUD modal opened from the File Manager toolbar's new **Tags** button, max-w-4xl wide so multi-language subtitles don't wrap. Table with name + file count + rename/delete actions; row-click pushes the tag into the active filter and closes the modal. Delete confirm-dialog warns specifically when `file_count > 0` ("This tag is on N file(s). Deleting removes the chip from all of them; files themselves are untouched."). Same Esc / backdrop / mid-mutation guard shape as `LocationsModal`. **Frontend — `BulkTagsPickerModal`.** Opens from the File Manager's multi-select toolbar (new **Tag** button between Move and Delete). Add/Remove radio at the top, scrollable checkbox list of catalog tags, inline "create new tag" affordance disabled on case-insensitive dup against the existing list, Apply button disabled until ≥1 tag is selected. The `replace` action is exposed in the API but deliberately NOT in the UI — arbitrary multi-file replace is destructive and confusing; future bulk-edit screen can opt in later. **Frontend — `FileManagerPage` integration.** New `selectedTagIds: number[]` state, sorted into the `useQuery` key so the cache hits are stable regardless of toggle order. Tag catalog shared with the modals via `['library-tags']` query key (extracted to `frontend/src/utils/libraryTagsQuery.ts` to satisfy Vite's react-refresh rule that component files export only components). `useEffect` prunes `selectedTagIds` when a tag is deleted from the catalog so the filter never strands on a phantom id. **Filter rail** above the file list lists EVERY catalog tag as a togglable chip — inactive chips are outlined and muted, active chips are filled bambu-green with an X, click toggles. "Clear all" appears only when ≥1 tag is active. Hidden entirely when the catalog is empty so fresh installs don't see a stray bar. **List view** gets a dedicated **Tags** column at `minmax(0, 200px)` between Prints and Actions — placed after the existing data attributes since tags are a "file attribute". Empty state shows a `-` to keep the column shape consistent. **Grid view** chips render below the metadata block in each FileCard. Chip clicks in both views push to `selectedTagIds`; click propagation is stopped so a chip click doesn't toggle the file's selection state. **Type safety.** `LibraryFileListItem.tags?: LibraryTagSummary[]` is OPTIONAL even though the backend always emits an empty array, because legacy msw mocks in pre-existing tests (FileManagerPage / FileManagerExternalFolder) construct partial file shapes without the field — without the `?` the renderer crashed on `.length`. Read sites use `file.tags ?? []` and the `!.` non-null assertion only inside the inner `&&` guard. **Dependencies.** Zero new deps. The whole tag UI reuses `lucide-react`'s `Tag` icon, existing button/modal primitives, and `@tanstack/react-query` already in the bundle. Bundle size unchanged from the previous 0.2.5b1 baseline (7,876 KB raw / 2,122 KB gzip). **Tests.** 15 backend integration cases in `backend/tests/integration/test_library_tags_api.py` — CRUD: create + list, strip-whitespace, case-insensitive dup 409 across "Toys"/"toys"/"TOYS"/"  ToYs  ", rename, rename-collision 409, self-rename allowed, delete cascades associations but keeps files, delete-unknown 404. Bulk: add idempotency (second call adds 0, file_count stays 1), remove drops only listed tags (peer tag stays), replace-with-empty clears, unknown file ids silently skipped, invalid action 422. Filter: AND across two tags returns only the intersection file, tag filter overrides folder_id (file from another folder still appears when the tag matches), file listing includes the tags array. 15/15 green plus 102/102 across `test_library_api.py` + `test_library_trash_api.py` (no regression). 8 frontend cases — 4 in `LibraryTagsModal.test.tsx` (renders + count, create flow PATCHes correctly, row click → onPickTag + close, in-use delete warning), 4 in `BulkTagsPickerModal.test.tsx` (lists tags, check + Add calls bulkAssign with action='add' and the right file/tag arrays, Remove radio + Apply uses action='remove', Apply disabled when no tag selected). Full vitest run: 2249/2249 across 170 test files. Full backend `pytest -n 30`: 6341/6341. **i18n.** 37 new keys under `fileManager.tags.*` namespace (modal title/subtitle, manage/manageTitle, add/edit, name/fileCount, empty/noMatches, createPlaceholder/createButton, nameRequired, searchPlaceholder, CRUD success/failure toasts, applyAdd/applyRemove + their success messages, actionAdd/actionRemove radio labels, tagAction button, bulkTitle, bulkTooltip, noPermission, filterLabel, clearAll, confirmDelete + the in-use variant, editAria/deleteAria). Translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5292 leaves per locale, no English fallback (the `defaultValue: "..."` shortcut from a first-draft modal was removed precisely so the parity check would fail loudly if any locale missed a key). **Permissions.** Catalog mutations require `LIBRARY_UPDATE_ALL` (the catalog is global — ownership-aware update isn't meaningful for a row no user owns). Bulk-assign uses the existing `LIBRARY_UPDATE_ALL`/`LIBRARY_UPDATE_OWN` ownership pair. GET uses `LIBRARY_READ_*` with the file-count projection narrowed for `*_OWN` callers. No new permission constants, no new RBAC migration. **Out of scope (deferred to v2 if asked).** Tag colors / icons (label-only chips per design decision #1), tags on `print_archives` rows (different mental model — archives are completed prints), auto-tags derived from 3MF metadata categories (kept user-authored per design decision #4), import/export of the tag set, tag-filter intersected with folder scoping (the design call was that cross-cutting filter overrides folder selection — adding an "AND folder" toggle would need separate UX work). **Closes #1268** alongside the recursive-search and markdown-description-panel pieces below — all three deliverables in this issue ship in the same minor.
- **File Manager: recursive search and per-folder markdown description panel (#1268, requested by @zumik3-del, second by @unLieb)** — Two of the three asks bundled in #1268; the third (tags) is gated on the community-interest check Martin posted there. **(1) Recursive search inside the selected folder.** Until now, picking "Toys" in the sidebar and typing `robot` only found files in `Toys/` itself — anything under `Toys/Cars/` or `Toys/Cars/Race/` was invisible until the user manually drilled in. The page's client-side filter was running over a server-narrowed list (`/library/files?folder_id=X` is strict equality on `folder_id`), so search couldn't see what the listing didn't load. New `recursive=true` query param on `/library/files` walks the `library_folders.parent_id` tree via a recursive CTE rooted at the requested `folder_id` and returns every descendant folder's files in one round-trip. Recursive CTEs work on both SQLite (≥3.8.3, shipped 2014 — Bambuddy's floor is well above that) and Postgres without dialect branching. Default off so the existing folder-browsing call sites (Project / Archive detail pages, the FE's no-search case) keep their narrow single-folder semantics — only the FE's search bar opts in, and only when both a folder is selected AND `searchQuery.trim()` is non-empty. A small "Including subfolders" hint renders under the search input when the recursive request is active so the user understands why a file from two folders away showed up. **(2) Per-folder markdown description panel.** New endpoint `GET /library/folders/{folder_id}/readme` reads the first `.md` file in the folder and returns `{filename, content, truncated}`. Selection prefers `README.md` / `readme.md` / `description.md` (case-insensitive — picked via `func.lower(filename) LIKE '%.md'` filter + an in-Python stem-preference sort), falls back to the alphabetically-first `*.md` otherwise. 404 when no markdown file is present so the FE can hide the side panel — non-users pay no UI cost. Bytes are clipped at 512 KiB (`_README_BYTES_CAP`) with a `truncated` flag so the panel can warn the reader; UTF-8 decode uses `errors="replace"` so one bad byte never blanks the panel. New `FolderReadmePanel.tsx` component fetches the README on folder-select, renders it via `react-markdown@9` + `remark-gfm@4` (tables / strikethrough / task lists), collapsible (default expanded), max-height 24rem with internal scroll. react-markdown 9 doesn't render raw HTML by default — XSS safe without dompurify. Links open in a new tab with `rel="noopener noreferrer"`. Tailwind has no typography plugin in this project so per-element components map h1/h2/h3/p/ul/ol/code/blockquote/table/etc. to explicit utility classes that match the rest of the app's look. **Both ask 1 and 2 ship as one PR** because they share scope (file-manager UX), the same reporter, and the same review surface; ask 3 (tags) is held back as gated on the public interest signal Martin requested in his comment ("If you'd find this feature useful, please give this issue a thumbs up"). **Backend.** `list_files` route at `backend/app/api/routes/library.py:1729+` gains the `recursive: bool = False` param + the recursive-CTE branch. New `get_folder_readme` route at `:1042+` with `_README_BYTES_CAP` constant + `_README_PREFERRED_STEMS` selection tuple. New `FolderReadmeResponse` schema in `backend/app/schemas/library.py:66+`. **Frontend.** `api.getLibraryFiles` at `frontend/src/api/client.ts:5785+` gains the `recursive = false` parameter; `api.getLibraryFolderReadme` is the matching helper for the new endpoint. `FileManagerPage.tsx` derives `searchExpandsSubfolders` from `selectedFolderId !== null && searchQuery.trim().length > 0` and threads it into both the `useQuery` key (so toggling search refetches with the new scope) and the API call. The new `FolderReadmePanel` mounts above the file list when `selectedFolderId !== null`. **Dependencies.** `react-markdown ^9` + `remark-gfm ^4` added to `frontend/package.json` (~30 KB gzipped — single use-site for now, but reusable for any future markdown surface — print-archive notes, custom-field docs, etc.). No new backend dependency. **Tests.** 6 backend integration cases in `backend/tests/integration/test_library_api.py` pin the contract: `recursive=true` walks a three-level tree and returns files from all levels but NOT a sibling unrelated branch; `recursive=true` without `folder_id` is a no-op (the existing `include_root` branch still handles scoping); README endpoint returns the first .md with the correct on-disk content; README endpoint prefers `README.md` over `notes.md` even when `notes.md` is inserted FIRST and `readme.md` is lowercase; 404 when the folder has no .md; 404 when the folder doesn't exist. 3 frontend cases in `src/__tests__/components/FolderReadmePanel.test.tsx` cover: 404 hides the panel (no leaked chrome), markdown content renders via `findByRole('heading')`, truncated flag surfaces a chip. Full backend `pytest -n 30` 6326/6326 green; frontend vitest 1094/1094 component cases green; ruff clean; `npm run build` clean. **i18n.** 2 new keys — `fileManager.searchSubfoldersHint` (the small under-search caption) + `fileManager.readme.truncated` (the chip label when the markdown was clipped). Translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW), parity check 5255 leaves per locale, no English fallback. **Scope.** No new permission — both endpoints reuse the existing `LIBRARY_READ_ALL` / `LIBRARY_READ_OWN` ownership-aware permission pair (so a viewer-tier user with `read_own` only sees their own files in recursive listings + can only request the README of folders containing their own files). No DB migration. The recursive CTE is a single SQL query — no N+1, no per-folder round-trip, scales to deeply-nested model libraries.
- **By-tag spool lookup, readable with a Manage-Inventory API key (#1700 closing #1663, reported + contributed by @bambuman)** — Companion to the QR-code-API-key flow below: gives @bambuman's BambuMan NFC inventory app — and any future scanner-driven Bambuddy integration — a way to dedupe a spool scan with a single, narrowly-scoped API key. **New endpoint:** `GET /inventory/spools/by-tag?tray_uuid=…&tag_uid=…&include_archived=false`. `tray_uuid` is the primary identifier (it's the same 32-char hex the AMS reports over MQTT, so the scan can match a spool that's already linked to the printer), `tag_uid` is the fallback. At least one must be supplied (400 otherwise); 404 when nothing matches. Both values are passed through `normalize_tray_uuid` / `normalize_tag_uid` from `backend/app/utils/tag_normalization.py` — lowercase / colon / dash separators all match the stored uppercase hex, mirroring the existing `link_tag` route's `func.upper(column) == value` comparison so SQLite and Postgres behave identically. Archived spools are excluded by default, opt in via `include_archived=true`. **Why this isn't on the existing `/inventory/spools` list endpoint:** that one is purely advisory — it returns every spool the caller is allowed to see, no auth narrowing possible. The contributor's NFC app would have had to pull the whole inventory to check whether a freshly-scanned tag already existed, which both required the broader **Read Status** scope (an API key with **Manage Inventory** alone — the documented kiosk/inventory-write scope — couldn't list spools) and grew O(n) with the user's spool count. By-tag lookup is O(1) and the narrower scope rule below means the Manage-Inventory key the app already needs to *create* a spool is also enough to *check whether one exists* before creating. **Scope shape (per-endpoint, NOT a global mapping change):** `RequireAnyPermissionIfAuthEnabled(Permission.INVENTORY_READ, Permission.INVENTORY_UPDATE)` — INVENTORY_READ is satisfied by `can_read_status` (read-status keys), INVENTORY_UPDATE by `can_manage_inventory` (manage-inventory keys), and `_check_apikey_permissions(..., require_any=True)` enforces that at least one mapped flag is set (the GHSA-r2qv-8222-hqg3 fail-closed rule). Listing all spools (`/inventory/spools`) and fetching by id (`/inventory/spools/{id}`) still require **Read Status** unchanged — only this one endpoint accepts either scope. The first iteration of the PR widened the global `_APIKEY_SCOPE_BY_PERMISSION` to a tuple, which would have promoted ~21 inventory-read endpoints to also accept manage-inventory keys; review caught that the global shape was wider than the ask and the contributor revised to the per-endpoint dependency. The drift-detection RBAC scope-introspection tests stay untouched because the global table didn't change. **Route ordering:** the new `/spools/by-tag` registers at `inventory.py:1184` *before* the existing `/spools/{spool_id}` at `:1227`, so FastAPI's first-match wins and the literal `by-tag` path never collides with the `int spool_id` route (pinned by `test_does_not_collide_with_spool_id_route`). **Tests:** 13 integration cases in `backend/tests/integration/test_spool_by_tag_lookup.py` — match by tray_uuid, match by tag_uid, normalisation of messy input, tray_uuid-preferred-when-both-given, tray_uuid-miss falls through to tag_uid (not 404), no-id → 400, non-hex → 400, no-match → 404, archived-excluded-by-default + include-archived opt-in, route-collision regression, plus three API-key scope cases that pin the new dependency (manage-inventory key reads, read-status key reads, key without either inventory scope gets 403). 13/13 green plus the 48 existing route-auth-coverage + RBAC tests still green (the `require_` substring pattern already catches `require_any_permission_if_auth_enabled.<locals>.checker` — no allowlist edit needed). Ruff clean. **Companion docs (maziggy/bambuddy-wiki#42):** `docs/reference/api.md` gains a new **Spool Inventory** section documenting the endpoint contract; `docs/features/api-keys.md` adds the by-tag row to the Common Endpoints table and a "Manage Inventory keys can look up spools by tag" note. No DB migration, no schema change, no frontend change.
- **QR code on API-key creation that encodes server URL + key together (#1677, contributed by @bambuman)** — The "API Key Created Successfully" panel gets a new **QR code** button next to **Dismiss**. Clicking it opens a modal showing a single QR encoding the Bambuddy base URL and the freshly-created API key together, so a mobile client (e.g. the contributor's BambuMan NFC inventory app, or any future Bambuddy-aware app) can scan once to configure both — no copy-paste of the long, shown-only-once secret. **Payload contract (versioned):** `bambuddy://config?v=1&url=<encodeURIComponent(baseUrl)>&key=<encodeURIComponent(apiKey)>`. `v=1` first so future bumps to `v=2` have a clean deprecation path; both values URL-encoded so reserved characters in either don't corrupt the parse. The builder lives in `frontend/src/utils/apiKeyQr.ts` exporting `buildApiKeyQrPayload()` + `API_KEY_QR_VERSION` so any future mobile-side parser has a stable shared constant to anchor against. **`baseUrl` source:** prefers the configured **External URL** setting (Settings → Network), falling back to `window.location.origin` if not set, so the encoded address is reachable from a phone behind a reverse proxy / Docker host. The fallback's failure mode (admin on `http://localhost:8000` without External URL configured → phone can't reach the encoded URL) is unavoidable without exposing a network probe; the warning text in the modal cautions the user generally. **Security posture:** the QR is generated **client-side from the in-memory `createdAPIKey`** React state — the key is never persisted, never re-fetched (keys are stored hashed at `/api/keys` POST and returned in plaintext exactly once), and never round-trips to the server. No download button (intentional contrast with the existing `QRCodeModal.tsx`, which encodes a public archive URL and does offer download) so the secret can't be saved to disk via the browser's download manager. The "Dismiss" handler now clears both `showApiKeyQR` and `createdAPIKey` so closing the panel scrubs the plaintext from React state. Modal closes on Escape and backdrop click; an amber warning under the QR reminds the user not to screenshot or share. **Component:** new `frontend/src/components/ApiKeyQRCodeModal.tsx` using `qrcode.react`'s `QRCodeSVG` at 256 px (renders Version 5 / 6 territory for the typical ~120-character payload, comfortably below the alphanumeric capacity). **Dependency:** `qrcode.react ^4.2.0` added to `frontend/package.json` (+21 KB raw / ~9 KB gzip to the bundle). Existing `frontend/src/components/QRCodeModal.tsx` is untouched — different purpose (server-rendered PNG for archive deeplinks), different component, no collision. **Tests:** `frontend/src/__tests__/utils/apiKeyQr.test.ts` pins the contract — scheme + `v=` first, exact encoding of `https://printer.local` + `bb_abc123` byte-for-byte, special-character round-trip (`+`, `/`, `=`, `&`, spaces), explicit assertion that the raw unencoded key never leaks into the payload, and a `URLSearchParams` round-trip that re-parses `v` / `url` / `key` back out and asserts equality with the inputs. 4/4 green. **i18n:** 4 new keys in the `settings.*` namespace (`apiKeyQrButton`, `apiKeyQrTitle`, `apiKeyQrCaption`, `apiKeyQrWarning`); full translations in all 10 non-en locales (de / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW), parity check green. ESLint clean; `npm run build` clean (7,603 kB raw, +21 kB vs dev). No backend change, no permission change, no DB migration.
- **Centralised sidebar layout + per-page hide toggles (#1673, contributed by @EdwardChamberlain)** — Sidebar item ordering and visibility move from inline `Layout.tsx` state to a dedicated module so the same persistence rules apply whether the user is reordering with drag-and-drop, toggling an item off, or accepting the admin-pushed default. New `frontend/src/utils/sidebarLayout.ts` owns the localStorage round-trip (`sidebarOrder` + `sidebarHiddenSystemItems` keys), the `SIDEBAR_LAYOUT_CHANGED_EVENT` cross-tab refresh broadcast, and the `isExternalSidebarItemId` helper that distinguishes the new `ext-*` external link prefix from built-in nav. **Hide / show toggle:** every built-in sidebar entry (Printers / Inventory / Archives / Queue / Projects / File Manager / Makerworld / Profiles / Maintenance / Statistics — Settings is intentionally non-hideable) now carries an eye icon in the Sidebar settings card; click it to drop that entry from the rendered sidebar. Hidden IDs persist per-user via localStorage so personal taste survives reloads without leaking to other users on a shared install. Re-show by clicking the eye again. The previous drag-to-reorder UX is retired in this PR — the hide list + admin default order cover the same "I never use the Stats page" / "give me Files first" needs without the affordance ambiguity of the rearrange handle. **Admin default order:** new `default_sidebar_order` setting (validated server-side at `backend/app/schemas/settings.py:533+`) holds a JSON object `{order: string[], hiddenSystemItemIds: string[]}` that admins set once from Settings → General → Sidebar (Set Default toggle). On first login per user, `Layout.tsx`'s `useEffect` reads the admin default, filters it against the current `defaultNavItems` + valid external IDs (so a deleted external link or a removed built-in doesn't strand in someone's stored order), applies it locally, and records a per-user `sidebarDefaultApplied_<user_id>` localStorage flag so the default is one-shot — later user-driven changes aren't clobbered on every login. **Settings card:** `ExternalLinksSettings.tsx` is the single source of truth for the Sidebar card (`card-sidebar-links`) in Settings → General. The header now carries the **Set Default** toggle (visible only when the caller holds `settings:write`), a **Reset** button (clears both `sidebarOrder` + `sidebarHiddenSystemItems` to defaults), and the **Add Link** button (opens the external-link create modal). The body lists every sidebar item — built-in or external — with the eye toggle inline on each row. The header row uses `flex-wrap` on the outer container and the right-side control group so the Add Link button doesn't overflow the card's right edge when Column 3 sits at its narrow `lg:max-w-sm` (384px) width. **Settings → General reordering (post-merge polish):** the **Updates** card moved to the top of Column 3 (above the new Sidebar card); the **Data Management** card moved to the bottom of Column 2 (after Library Auto-Purge) so the General tab balances better with the new Sidebar card taking column 3's vertical real estate. Anchor IDs `card-updates`, `card-data`, `card-sidebar-links` are preserved so deep-links + the in-app `registerSettingsSearch` index still resolve. **Layout merge edge case:** the PR's refactor of `Layout.tsx::isHidden` accidentally dropped the dev-side notifications gate (`!authEnabled || !advancedAuthStatus?.advanced_auth_enabled || settings?.user_notifications_enabled === false`) and its `advancedAuthStatus` useQuery. The merged shape keeps three gates in priority order — `hiddenSystemItemIds.includes(id)` first (cheapest, explicit user intent), then the array-aware `navPermissions` check from #1755 (granular `*:read_own` / `*:read_all` tiers), then the notifications-specific gate — so a user without advanced auth doesn't suddenly see the Notifications entry. **Backend:** `default_sidebar_order` settings field accepts both shapes (plain array OR `{order, hiddenSystemItemIds}` object) for backward compat with installs that saved an array under an earlier draft of this work. Validator rejects any `hiddenSystemItemIds` that isn't a `list[str]` with 422. **Tests:** 17 new backend cases in `test_sidebar_settings.py` pinning the validator (empty / JSON-array / JSON-object / mixed-types / hostile shapes). Frontend: 5 new `Layout.test.tsx` cases pinning the hide-toggle behaviour (hidden ID drops the entry, hidden ID for Settings is ignored — `settings` is non-hideable, eye-click round-trips through localStorage, `SIDEBAR_LAYOUT_CHANGED_EVENT` triggers a re-read across tabs) and 255 added/changed lines in `SettingsPage.test.tsx` covering the admin-default toggle and the eye-icon visibility column. **i18n:** new keys in the `externalLinks.*` namespace (sidebarLayout / sidebarLayoutDescription / visibleInSidebar / hiddenFromSidebar / requiredInSidebar / setDefault / etc.), full translations in all 10 non-en locales (de / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5168 leaves per locale. Vitest test timeout raised in `vitest.config.ts` to absorb the `userEvent.setup({delay: null})` cases in the heavier `SettingsPage` flows. Full vitest run green; ESLint clean; `npm run build` clean; ruff clean.
- **Structured storage locations catalog (#1505 closing #1004, contributed by @Poltavtcev)** — Inventory gets a first-class catalog of physical storage spots (shelves, drawers, dryboxes) instead of free-text in the spool's `storage_location` field. Spools now carry a `location_id` FK alongside the denormalized `storage_location` string (kept for Spoolman wire format + label rendering). The Inventory page picks up a **Locations** button that opens an in-page modal — the original PR landed a standalone `/inventory/locations` page; merged shape is a modal opened from Inventory so the catalog read sits next to the spool list. The modal handles create / edit / delete / pick-to-filter; row-click pushes the location_id into the Inventory filter state without a navigation. Deep-link `?location_id=<n>` (and `?location_id=__none__` for the unset bucket) still works for sharing or bookmarking. **Backend:** new `Location` model + `locations` table with case-insensitive `name_key` (LOWER(TRIM(name))) UNIQUE — concurrent creates on the same name resolve to a single 409 via the `IntegrityError` → re-fetch shape in `_create_location_or_get_existing`. CRUD at `/api/v1/inventory/locations`, all five routes gated with `RequirePermissionIfAuthEnabled(Permission.INVENTORY_READ|UPDATE)`. Delete is blocked while `spool_count > 0` so the user can't strand spools. Single-write-path is `location_service::resolve_spool_location_fields()` — both the internal-mode and Spoolman-mode spool routes feed through it so `location_id` and `storage_location` can never drift. **Spoolman parity:** location names sync into the local catalog on `GET /spoolman/inventory/spools` via `maybe_sync_spoolman_locations`; rename cascades to every Spoolman spool via `client.rename_location`, with a per-spool PATCH fallback when the upstream's bulk endpoint isn't there (Spoolman <0.16 doesn't expose `PATCH /location/{name}` and returns 404/405). `get_distinct_locations` normalises both the older `list[str]` and the newer `list[dict]` Spoolman payload shapes. **Migration:** inline in `database.py::run_migrations` — creates the `locations` table (DATETIME for SQLite / TIMESTAMP for Postgres), adds `spool.location_id` FK + index, then backfills the catalog from existing free-text values (GROUP BY `LOWER(TRIM(storage_location))` so case variants like `Drybox 1` and `DRYBOX 1` collapse into one row). The legacy `name_key` backfill runs BEFORE the dedup INSERT so a pre-existing locations row with NULL `name_key` (manually inserted before this feature shipped) gets its column populated first and the subsequent spool-link UPDATE can join on it. Post-migration warn-log flags any spools that still carry free-text `storage_location` with no `location_id` — surfaces the rare mis-link case to ops instead of silently leaving them out of catalog filters. **Rename safety:** Spoolman PATCH runs BEFORE `db.commit()`, cascade failure rolls back the local rename and raises HTTP 502 — without this ordering a partial failure left the catalog and Spoolman's per-spool `location` field permanently diverged (the next sync recreates the old name as a duplicate catalog row). Legacy-row UPDATE matches `func.lower(func.trim(Spool.storage_location)) == old_name.strip().lower()` so the SQL TRIM symmetry holds for whitespace-padded values. **Cross-tab refresh:** `spoolman_inventory.py` now emits `inventory_changed` on the 8 spool-mutating routes (create, bulk-create, update, delete, archive, restore, reset-bulk, weight, tag) — internal mode already broadcast in 12 places, Spoolman mode silently degraded before. The `useWebSocket` handler invalidates `inventoryLocationsQueryKey` on every such message so location counts stay in sync across tabs. **Performance:** the Spoolman→catalog sync used to fire on every `GET /spools` request, hit Spoolman, and open a write transaction; now guarded by a 60s per-URL TTL cache (`_spoolman_location_sync_last_run`) so a polling UI doesn't burn a Spoolman round-trip + SQLite write per refetch. The route also passes its already-resolved client through to the sync so test fixtures that patch the route module's client also catch the sync's client lookup — without this the SSRF LAN-topology parametrize tests took ~45s on real TCP timeouts to RFC-1918 IPs (now 2.79s in isolation). **Frontend:** `SpoolFormModal` location dropdown sends `location_id` only (same shape in both inventory modes — no `spoolmanMode ? ... : ...` UI gate) and the `onCreateLocation` flow surfaces `ApiError.message` instead of a generic toast so 409 / 400 / 500 stay distinguishable. `LocationsModal` passes `isLoading` to `ConfirmModal` during delete so a mid-mutation cancel can't strand a toast on a dismissed dialog; Pencil / Trash icon buttons carry `aria-label` for SR announcement. **i18n:** new `locations.*` namespace (20 keys: title, subtitle, add, edit, delete, empty, name, spools, manage, createPlaceholder, nameRequired, created, updated, deleted, saveFailed, deleteFailed, deleteBlocked, confirmDelete, confirmDeleteMessage, editAria/deleteAria), full translations in all 10 non-en locales (de / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5168 leaves per locale. **Tests:** ~26 new across `backend/tests/unit/test_location_service.py` (rename strip/lower symmetry, sync-from-Spoolman log-on-unavailable, list[dict] payload normalisation), `backend/tests/unit/test_spoolman_inventory_methods.py` (`get_distinct_locations` shape guard × 4, `rename_location` bulk-then-fallback × 4 — 200 / 404 / 405 / 5xx), `backend/tests/unit/test_location_migration.py` (NULL + whitespace-only storage_location skip, legacy NULL name_key ordering, case-variant dedup, idempotency), `backend/tests/integration/test_locations_api.py` (CRUD round-trip, rename cascade, IntegrityError → 409, PATCH/DELETE 404, auth-gate 401 on all five routes when `auth_enabled=true`), and `frontend/src/__tests__/components/LocationsModal.test.tsx` (12 cases: open=false renders nothing + no fetch, row click → onPickLocation + onClose, 2-level Escape dialog stacking, rename collision 409 toast, disabled delete on `spool_count>0`, etc.). Frontend `useWebSocket.test.ts` exercises the `inventory_changed` → invalidate `['inventory-locations']` round-trip. Full backend pytest 6025/6025 (67s with -n 30); frontend vitest 2141/2141; ruff clean; `npm run build` clean; ESLint clean; i18n parity green.
- **Admin-configurable session lifetime (#1706, reported by @AD3DStuff)** — The 24-hour session cap that ships with Bambuddy was an intentional security hardening (audit finding M-2 reduced it from 7 days), but the "Remember Me" checkbox only controlled storage location (localStorage vs sessionStorage), not session duration. iPhone PWA users and homelab admins on trusted networks were getting kicked out every 24 hours with no way to extend it. **New setting:** `session_max_hours` under Settings → Users with three presets (24h / 7 days / 30 days) plus a custom field, hard-capped at 30 days (720h). Default remains 24h so existing deployments and the M-2 audit baseline are untouched until an admin opts in. The Settings card surfaces a yellow warning whenever the value exceeds 24h: "Longer sessions reduce automatic logout protection. Recommended only for trusted single-user deployments." **Backend wiring:** new `resolve_session_max_minutes(db)` helper in `backend/app/core/auth.py` reads the setting, clamps to [1h, 720h], and falls back to 24h on missing / blank / unparseable values. The helper is called at all four token-issuance sites — plain `/auth/login`, 2FA TOTP/email completion, 2FA backup-code completion, and OIDC callback — so a long-session policy works uniformly regardless of how the user authenticates. DB errors in the resolver are deliberately NOT caught: login is already inside a transaction and a broken DB must abort the login rather than silently extend or shrink the session lifetime. Defense-in-depth `SESSION_MAX_HOURS_HARD_CEILING = 720` clamps any tampered DB row above the Pydantic ceiling. Already-issued tokens keep their original expiry — the new setting only affects future logins, so an admin lowering the value can't retroactively revoke active sessions and an admin raising it can't retroactively extend them. **What this does NOT change:** the "Remember Me" checkbox still controls only storage location (cleared on browser close vs persisted across restarts). The relabel from misleading-UX-perspective is left for a separate follow-up — that's a UX choice independent of the session-policy mechanism. API tokens (`MAX_TOKEN_LIFETIME_DAYS`), camera stream tokens (60min), WebSocket tokens (60min), and slicer download tokens (5min) keep their own TTLs and are unaffected. **Tests:** 15 new cases in `backend/tests/integration/test_session_policy.py` split across three classes. `TestResolveSessionMaxMinutes` pins the clamping resolver — missing row, empty string, unparseable value, zero/negative, 1h minimum, 7-day passthrough, 30-day passthrough, above-ceiling clamp. `TestLoginRespectsSessionPolicy` decodes the JWT `exp` claim end-to-end and asserts the token returned by `/auth/login` honours the configured ceiling for the default-24h, configured-7d, and above-ceiling-clamp cases. `TestSettingsAPIExposesSessionMaxHours` round-trips the field through `/settings/` (default = 24, valid update persists as int's string form, zero rejected with 422, above-ceiling rejected with 422). Existing 202-case auth + MFA suite still green. **i18n:** 8 new keys in `settings.sessionPolicy.*` namespace; full translations in all 10 non-en locales (de / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW), no English fallback. Parity check 5149 leaves per locale. ESLint clean; `npm run build` clean; ruff clean.
- **Per-VP "G-code injection" toggle for Studio Send / FTP uploads (#1516, contributed by @phieb)** — Queue-mode Virtual Printers gain a per-VP opt-in toggle that applies the Settings → G-code Snippets per-model start/end snippets to every job that lands via the VP — Bambu Studio's "Send", OrcaSlicer's "Print Plate", the VP's own FTP upload path. Before this change the snippets were only applied to items queued through the PrintModal's "Inject auto-print G-code" checkbox; VP-incoming jobs silently bypassed injection regardless of how the snippets were configured. **Default off so upgraders don't silently start injecting**: existing `gcode_snippets` installs keep their previous behaviour until the per-VP toggle is explicitly enabled. When on, the scheduler still no-ops unless `gcode_snippets` are configured for the target printer model, so the effective semantics are "inject when enabled AND snippets exist." **DB column:** new `virtual_printers.gcode_injection BOOLEAN DEFAULT FALSE` with a branched `is_sqlite()` migration (SQLite `DEFAULT 0` / Postgres `DEFAULT FALSE`) matching the `queue_force_color_match` / `tailscale_disabled` precedent. **Multi-plate stamping:** the flag is set on every plate's `PrintQueueItem` inside the per-plate loop introduced by #1697 / #1188, so a multi-plate "Send all" upload now gets snippets injected on each plate consistently — the original PR only stamped the first plate; the merge resolution wove the flag into the loop. **Live-toggle correctness:** the `_sync_from_db_locked` change detector now compares `instance.gcode_injection != vp.gcode_injection`, so toggling the value in the UI triggers a VP restart instead of letting the in-memory instance keep the stale flag and silently propagate it onto every subsequent upload — same shape as the #1552 family. Backed by a dedicated `test_sync_from_db_restarts_on_gcode_injection_toggle`. **UI:** new toggle on `VirtualPrinterCard.tsx` (queue mode only — the toggle is hidden in archive/review/proxy modes since the feature is queue-specific), with the standard `updateMutation` save-on-click + toast on success, plus the `pendingAction='gcodeInjection'` opacity dim during the round-trip. **PrintModal hardening:** when "Inject auto-print G-code" is ticked on a reprint at quantity > 1, the modal now routes ALL copies through the queue (not just copies 2..N) so the scheduler injects every dispatch — see the separate reprint-quantity entry below for the full motivation. A new `useEffect` clears the stale `gcodeInjection` state if the user ticks the box at quantity 2, then drops back to quantity 1 — the checkbox hides at that point and the state must follow, otherwise the immediate-reprint path would silently bypass injection. **Diagnostics:** the resolved start/end snippets (with `{placeholder}` substitution already applied) are logged at DEBUG so any "snippet didn't run" report can be traced from a log bundle. **i18n:** new `virtualPrinter.gcodeInjection.title` + `description` keys translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW); parity check 5188 leaves per locale, no English fallback. **Tests:** 2 new unit cases in `test_virtual_printer.py` (queue items opt in / out based on the VP flag), 2 new integration cases in `test_virtual_printer_api.py` (create defaults to false, PUT round-trips the value), 1 new sync-restart case, plus updates to `_make_db_vp` so the change-detector test fixture carries an explicit `False` rather than relying on `MagicMock` truthiness. 2 new PrintModal vitest cases pin the reprint dispatch matrix (injection ON queues all copies and dispatches none immediately; injection OFF keeps the immediate first copy and queues the rest). Full backend pytest 6167/6167; full frontend vitest 2154/2154; ruff clean; `npm run build` clean.
- **AMS Filament Backup status + control on the printer card** — New per-printer surface that mirrors BambuStudio's "AMS Filament Backup" checkbox (the per-AMS auto-switch to a second matching spool when one runs out). Until now Bambuddy had no read or write access to the printer-side backup state; the only way to change it was via the slicer or the printer's touchscreen, and Bambuddy's "Prefer lowest remaining filament" preference was ignorant of it (see the linked Fixed entry for #1766 — the two ship together). **Backend — parse the state.** New tri-state `PrinterState.ams_filament_backup: bool | None` populated from bit 18 of the top-level `print.cfg` hex string on every push_status (`bambu_mqtt.py::_process_message` ~line 1037). New module-level helper `parse_ams_filament_backup_from_cfg()` returns `None` on absent / non-hex / non-string input so old-protocol families (A1 / A1 Mini, which emit no `cfg`) preserve today's behaviour — the tri-state default applies the dispatcher's sort, never coerces to OFF, so A1 users see zero regression. Verified against OrcaSlicer source (`DeviceManager.cpp:4961` `SetAutoRefillEnabled(get_flag_bits(cfg, 18))`) and a live H2D ON/OFF capture during this work — the cfg flips exactly between `C0340FC219` (bit 18 set, ON) and `C0340BC219` (bit 18 clear, OFF), only the fifth nibble changing. **Backend — toggle.** New `POST /printers/{id}/ams-backup?enabled=<bool>` route gated on `Permission.PRINTERS_CONTROL` calls `client.set_ams_filament_backup(enabled)` which routes through `_set_print_option("auto_switch_filament", enabled)`. The MQTT payload shape `{"print": {"command": "print_option", "auto_switch_filament": <bool>, "sequence_id": "20000"}}` was verified by capturing BambuStudio's own command on the request topic with a temporary outbound diagnostic logger — single field at a time, never bundled with other `print_option` flags, so we never clobber other state. Optimistic local state update lives inside `_set_print_option` immediately after `_client.publish(...)`. **Hold-timer guard** (`_xcam_hold_start["print_option_auto_switch_filament"]`, 3 s window, mirrors the existing xcam pattern for spaghetti / first-layer detector settings): when the user just toggled via Bambuddy's badge, the next 1-2 push_status frames may still carry the printer's PRE-toggle cfg before the firmware reflects the change — without this gate the badge would flicker ON→OFF→ON on every toggle. The hold fires only when Bambuddy itself initiated the change; Studio-side or printer-display toggles propagate immediately. **Backend — inventory-remain endpoint.** New `GET /printers/{id}/inventory-remain` route exposes the same `Map<global_tray_id, grams>` the dispatcher uses (via the existing `_build_inventory_remain_overrides` helper), so PrintModal's client-side "Prefer Lowest Remaining Filament" sort can apply the same two-tier ordering the backend would on dispatch. Internal AND Spoolman modes both work uniformly via the existing helper's mode branch — external / VT slots excluded, negative grams clamped to `max(0.0, label - used)`. JSON-keyed-as-string convention so the wire format is clean; client coerces back to Number on receive. Permission: `Permission.PRINTERS_READ` (same as reading printer status). **REST + WS response surface.** `printer_state_to_dict` and the `PrinterStatusResponse` Pydantic schema both extended with the new field; the printer's REST `/printers/{id}` response carries `ams_filament_backup`. `state.ams_filament_backup` added to the `status_key` dedup tuple in `main.py:1101` so backup toggles trigger an immediate WS broadcast and clients see live state changes whether the toggle came from Bambuddy, BambuStudio, or the printer's touchscreen. **Frontend — printer card badge.** Small icon button in the "Filaments" section header on each printer card (`PrintersPage.tsx`), placed beside the section label so the printer-wide nature reads correctly (the cfg bit is one per printer, not per AMS unit — the original draft put it per-AMS row, which would have duplicated the same state on multi-AMS printers and looked confusing). Three states: ON = blue circular-arrow icon (`Repeat` from lucide-react) on `bg-blue-500/20`; OFF = dim icon on `bg-bambu-dark`; unknown (A1 family / no cfg yet) = "?" character on dim background, click disabled. Click on a known state toggles via the new endpoint, with optimistic update and success toast (`AMS Filament Backup enabled/disabled`). The mutation invalidates BOTH `'printerStatus'` (camelCase) and `'printer-status'` (kebab-case) cache keys — the codebase has both conventions in active use (`useFilamentMapping`-related hooks use kebab, everything else uses camelCase), so only hitting one would leave PrintModal showing stale backup state if the user toggled from the printer card while the modal was open. **i18n.** 5 new keys in the `printers.amsBackup.*` namespace (`titleOn`, `titleOff`, `titleUnknown`, `toastEnabled`, `toastDisabled`) translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW), no English fallback. **Tests.** 12 new backend cases — `test_bambu_mqtt_cfg_parse.py` (parser × 13: real H2D ON/OFF captures, X1C short hex, lowercase, isolated bit-18 set / clear, every malformed shape returns None safely — note: 1 case is a parametrized invalid-input set of 7 sub-cases so the test file shows 13 reported cases) and `test_bambu_mqtt.py::TestAmsFilamentBackupHoldTimer` (× 3: stale push during hold ignored, push after hold applies, same-value push during hold no-op). Two PrinterState SimpleNamespace stubs in `test_printer_offline_notification.py` and `test_printer_manager_status_broadcast.py` extended with `ams_filament_backup=None` to match the new `status_key` field; full pytest confirms no other stub needed updating. **What this does NOT do.** Cover A1 / A1 Mini: those models emit no `cfg` field in push_status so the badge shows `?` and the dispatcher's sort applies as before. Once we identify the A1-specific field (waiting on a future Discord owner with a clean ON/OFF capture) we'll populate it via a model-specific path; until then the tri-state default keeps zero regression. Affect downstream consumers of PrinterState: `mqtt_relay`, webhook routes, and Home Assistant integration enumerate fields explicitly, so adding `ams_filament_backup` doesn't change what they emit. Full backend pytest 6217/6217; full frontend vitest 2170/2170; ruff clean; `npm run build` clean; ESLint clean.
- **Sort File Manager folder tree by recent activity (#1770, requested by @Kingbuzz0)** — Until now the folder tree was always sorted alphabetically by name, both backend (`order_by(LibraryFolder.name)`) and frontend. The reporter — a user with a lot of nested cad / slicer directories — wanted "find folders that just got a new 3MF" without scrolling the whole alphabet. **What changed.** The folder sidebar header gains a small dropdown (**By name** / **By recent activity**) plus an asc / desc arrow button, sitting alongside the existing Collapse + Wrap toggles. Choice persists per-browser via `localStorage` (`library-folder-sort-field`, `library-folder-sort-direction`) so the preference survives reloads. **Activity semantics.** `latest_activity_at` per folder = `MAX(folder.updated_at, MAX(immediate-child file.updated_at))`. The DB had the data — `LibraryFile.updated_at` is `onupdate=func.now()` and `LibraryFolder.updated_at` the same — but `LibraryFolder.updated_at` alone only bumps on rename / move, not on file-add inside the folder, which is exactly the wrong signal for "did I just drop a new model in here." The aggregate fixes that. Recursion across subfolders is intentionally **NOT** computed — a deeply nested new 3MF bubbles its immediate parent, not every ancestor up to the root. This keeps the route a single `GROUP BY` rather than a recursive CTE, matching the existing file_counts subquery shape sibling at `library.py:746`. A future Tier 3 follow-up could add the recursive-CTE variant if anyone reports deeply-nested updates not bubbling far enough. **Backend.** New `latest_activity_at: datetime | None` field on `FolderResponse` and `FolderTreeItem` schemas. The `/folders` tree route picks up a sibling `func.max(LibraryFile.updated_at)` group-by alongside the existing file-count subquery; resolves the field per row. The `/folders/by-project/{id}` and `/folders/by-archive/{id}` routes collapse their per-row file-count subquery to fetch `count + max` in one trip (one extra column, zero extra round-trips). All 5 single-folder constructors (POST `/folders`, GET `/folders/{id}`, PUT `/folders/{id}`, POST `/folders/external`, the create flows) populate the field with `max(folder.updated_at, latest_file)` or fall back to `folder.updated_at` when there are no files, so the API surface is consistent across every route that returns a folder. **External folders.** `LibraryFile` rows are created for scanned external files too (`library.py:526`), so the MAX aggregate works on them — but the timestamp reflects when Bambuddy last *scanned / re-indexed* the file, not the filesystem mtime. For a NAS that gets new files added outside Bambuddy, the activity-sort lags until the next scan. Documented in the file-manager wiki page rather than papered over with `os.stat()` on every list call, which would stall the route on slow mounts. **Frontend.** A new recursive `sortedFolders` `useMemo` applies the comparator uniformly to top-level + every nested `children` level so sort order is consistent at every depth. Comparator falls back to name when activity timestamps tie or are both null, so an empty folder never elbows a recently-used one to a random place — empties go to the end of the activity bucket regardless of direction. Both the desktop sidebar render and the mobile selector dropdown consume `sortedFolders` so the order is identical across breakpoints. The single-folder `findFolder()` traversal and `selectedFolder` memo still operate on the unsorted `folders` because they index by ID — sort-order-independent. **Recursion safety.** The sort creates fresh object refs at every level on every memo invocation; the `FolderTreeItem` keys stay ID-based (`${folder.id}-${collapseFoldersByDefault ? 'c' : 'e'}`) so React reconciliation by ID preserves folder expansion state across sort flips. **i18n.** 3 new keys in `fileManager.*` (`folderSort`, `folderSortByName`, `folderSortByActivity`) translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW), no English fallback. Parity 5238 leaves per locale. **Tests.** 2 new backend integration cases in `test_library_api.py` (file-in-folder bubbles `latest_activity_at` to the file's timestamp, empty folder falls back to `folder.updated_at`). All 152 library + folder + trash + slice integration tests still pass; 51/51 FileManagerPage frontend tests still pass; 26/26 QueuePage tests still pass; `npm run build` clean; `ruff` clean; i18n parity green.

### Fixed
- **Skip Objects listed the wrong plate's objects (#2522, reporter @bordermultimedia)** — The reporter uploads all-plates sliced files (`*.gcode.3mf`) and picks the plate at dispatch, which works. But Skip Objects then offered him four objects while the plate he was printing had one — and the four IDs it showed were, verbatim, the four copies sitting on a *different* plate of the same file. His 3MF confirms it exactly: plate 1 holds four `stand_pillow_01.stl` instances (identify_ids 2040 / 2062 / 2084 / 2106), plate 2 holds one (2168). He printed plate 2 and got plate 1's list. **Root cause, two defects in one helper.** `extract_printable_objects_from_3mf()` has taken a `plate_number` argument all along, and not one of its three call sites ever passed it — print start from an archived file, print start from the FTP-downloaded file, and the modal's `reload` all called it bare, so it fell to `root.find(".//plate")`, the first plate in the file. And passing one would not have helped: the lookup was `.//plate[@plate_idx='N']`, a predicate on an attribute neither Bambu Studio nor OrcaSlicer writes — the plate index lives in a `<metadata key="index" value="N"/>` child, which is how the rest of the codebase (`threemf_tools.py`, `filament_requirements.py`) already reads it. The XPath simply never matched and fell back to plate 1 regardless. The thumbnail behind the markers was right the whole time, because `/cover` resolves the plate properly via `resolve_plate_id()` — which is why the reporter saw plate 1's four markers arranged in a square over plate 2's single pillow. **Fix.** The plate is now selected on its `index` metadata, and all three call sites pass `resolve_plate_id(client.state)` — the same resolver `/cover` uses, so the object list and the thumbnail it is drawn over cannot disagree again. It covers both cases: Bambuddy-dispatched prints (where the plate is known from the dispatch, and must be — the reporter's P1S firmware echoes a `gcode_file` with no plate path, #1166) and prints started from the printer or Studio (where it is parsed from that path). When no plate can be resolved, or the requested plate isn't in the file, the first plate is still used — the single-plate export, i.e. the common case, is unaffected. **Also fixed, same file shape.** `peek_plate_index_in_3mf()` read the first plate too. It backs the #1204 guard, which compares the plate inside a freshly-downloaded 3MF against the plate the printer reports and *discards the file* on mismatch. Fed an all-plates upload it always answered "plate 1", so anyone printing plate 2+ of such a file from the printer screen had their perfectly good 3MF thrown away and got a no-3MF fallback archive — no metadata, no skip objects at all. It now returns `None` when the file carries more than one plate, because "which plate is this file" has no answer for an all-plates export; single-plate exports still report their index and #1204 behaves as before. **Tests.** 10 cases over a fixture mirroring the reporter's file: per-plate object lists and marker positions resolve independently, an unknown plate falls back without mixing one plate's objects with another's positions, a single-plate export keeps its own index, the multi-plate file yields no peek index, and the print-start wiring passes the dispatched plate and the gcode-parsed plate. Verified by mutation — dropping the plate argument reproduces the reporter's exact symptom, "Loaded 4 printable objects" for a one-object plate. **Scope.** Backend only. No DB migration, no schema change, no new permission, no i18n change.
- **Large prints uploaded twice at once and never landed (#2529, reporter @PDXDave23)** — On a 14-printer A1 farm, dispatches "failed over and over" and looked like flaky WiFi. The reporter's screen recording is the proof: the dispatch toast tracks a single job (96.1 MB, one printer), yet its byte counter alternates between two *independently rising* series — 69.4 → 70.8 MB and 1.6 → 2.9 MB, both climbing at ~75 KB/s. That is not a progress bar jumping. That is two FTP transfers of the same file, to the same printer, at the same time, reporting into the same bar. **Root cause.** `upload_file_async` carried a flat `timeout: float = 600.0` and ran the transfer as `asyncio.wait_for(loop.run_in_executor(...))`. `wait_for` cancels the *future*; it cannot cancel a thread already running in an executor. So on a link slow enough that a big file needs more than ten minutes — 96 MB at 75 KB/s needs twenty — the await gave up at 600 s, returned `False`, and `with_ftp_retry` started attempt two *while attempt one was still streaming*, both writing the same `remote_path`. Do the arithmetic and the stale series sits right where the ten-minute clock expires. With `ftp_retry_count: 3` plus the A1's prot_p→prot_c fallback that is up to six concurrent STORs onto one SD card; each orphaned thread also permanently held a slot in the default executor pool, which on a farm can starve every other FTP operation. The flat cap was never a failure detector in the first place — a link that has actually *died* is caught within `socket_timeout` (30 s) by the blocking `sendall`. It only ever punished large files. **Fix, three parts.** The deadline is now derived from the file size against a deliberately pessimistic 25 KB/s floor (`_upload_deadline`), so a slow-but-healthy transfer is allowed to finish. A deadline expiry now genuinely *stops* the transfer: it signals the worker, which raises `UploadCancelled` from its progress callback — the existing cancel path in `upload_file`, which breaks the send loop and deletes the partial file from the printer — and the caller waits for the thread to actually go before returning. And `with_ftp_retry` never retries an `UploadCancelled`: the deadline means the link sustained less than the floor rate for the whole transfer, so a retry would only spend another full deadline learning that again, and with `check_queue` serialized four of those would block the entire print queue for hours. A per-printer upload lock closes the last hole, so no two uploads can ever overlap on one printer regardless of how they were triggered. Queue items that hit the deadline now say the upload was too slow and to check the printer's WiFi, rather than the old (and here entirely misleading) "check if SD card is inserted". **Tests.** 6 cases: the deadline scales with file size and floors correctly; a timeout stops the worker thread and cleans its partial file off the printer; a timeout is not retried; concurrent dispatches to one printer serialize; and the real client's cancel path removes the partial file, driven end to end against the mock FTPS server. Verified by mutation — dropping the cancel signal, the retry guard, or the lock each fails its test. **Scope.** Backend only. No DB migration, no schema change, no new permission, no i18n change.
- **P1 AMS drying can only be started at the printer — Bambuddy no longer offers it (#2533, reporter @naldo29)** — The reporter found the answer to why his P1S accepted every drying command and never dried, and it is in Bambu's own P1 manual: *"P1S connected AMS drying functions may only be controlled from the P1S screen."* The P1 firmware acks `ams_filament_drying` with `result: success` and then discards it. Nothing we send can start a cycle, on any firmware version — so the honest thing is not to offer. `supports_drying()` now excludes the P1 series outright, in place of the `01.08+` firmware gate it has carried since the feature shipped (#292); that version was when P1 firmware gained AMS 2 Pro *support*, and it was never verified against a live P1 that the printer would take a command. The `/drying/start` and `/drying/stop` routes refuse with a specific 400 rather than publishing a message the printer will drop, and queue / ambient auto-drying skip P1 printers for free, since they gate on the same helper. **The control stays visible.** A new `drying_screen_only` capability flag keeps the flame button on the card, disabled, with a tooltip saying drying on this printer is screen-only — a P1 owner should learn *where* to dry, not watch the feature quietly disappear. A cycle started at the printer still shows in Bambuddy with its live countdown, because reading state was never the problem; only the Stop control goes away, since a P1 ignores stop exactly as it ignores start. **Docs.** The wiki's firmware matrix said P1P/P1S were supported from `01.08.00.00`, and (separately, and also wrongly) that P2S / H2S / H2C were not supported at all — the whole table has been rewritten against the code. **Tests.** 8 new cases: the model gate (both P1 variants, case- and whitespace-insensitive; screen-only ≠ unsupported, since an A1 has no drying-capable AMS at all while a P1 does), the two routes refusing without publishing anything to MQTT, a commandable model still dispatching, and two component cases pinning the disabled-with-explanation button and the stop-less countdown. **Scope.** One new response field. No DB migration, no schema change, no new permission; 1 new i18n key across all 11 locales.
- **"Start Drying" gave no feedback and reported success the printer never delivered (#2533, reporter @naldo29)** — On the reporter's P1S the button appeared dead: no toast, no badge, no drying. Their bundle shows Bambuddy doing everything right — the `ams_filament_drying` payload matches BambuStudio field-for-field, was sent three times with the printer idle, and the firmware answered `result: success` to each — while the AMS 2 Pro (`module_type: n3f`) stayed at `dry_status: 0`. The printer takes the command and drops it. Two gaps on our side made that indistinguishable from a broken button. **No confirmation.** `startDryingMutation` / `stopDryingMutation` closed the popover and invalidated the status cache without ever toasting, alone among the printer card's actions — so a user who clicked Start had nothing at all to tell them the click had registered. Both now toast on success — and the start toast says "Drying command sent", not "Drying started", because at that moment the printer has only *taken* the command. What says the cycle is genuinely live is the amber countdown badge, which is keyed on `dry_time` and therefore only appears when firmware reports one. **Success was inferred from the MQTT ack.** The #971 guard that turns firmware's refusal into a real message ("Plug in the external AMS power adapter", "AMS is already drying", …) reads the per-unit `dry_sf_reason` array — and P1-family firmware never publishes that field, so on a P1S the guard is inert and the ack is all we have. The card now watches the unit after the ack: `dry_status` and `dry_time` come straight from the `info` bitmask on every push, and firmware moves to `DryStatus 1` (Checking) within seconds of a real start. If the unit is still at zero 30 seconds later the cycle never began, and Bambuddy says so and names the two things that cause it (AMS power adapter not connected; printer not idle — P1S cannot dry mid-print, see `supports_drying_while_printing`). Unlike the `dry_sf_reason` guard this is model-agnostic: it catches any firmware that acks and declines. **Tests.** 4 component cases — the send toast, the stop toast, the warning firing when the AMS never leaves `dry_status: 0`, and no warning when it does enter a cycle. **Scope.** Frontend only; 3 new i18n keys across all 11 locales. No DB migration, no schema change, no new permission.
- **Enabling authentication silently disconnected Bambu Cloud (#2530, reporter @hburn7)** — Cloud credentials live in two different places depending on auth state: `get_stored_token()` reads the global `Settings` rows (`bambu_cloud_token` / `_email` / `_region`) when auth is off, and `User.cloud_token` when it's on. Completing `POST /auth/setup` flipped which store the `/cloud/*` routes consult, but nothing carried the token across — so an operator who linked their Bambu account *before* turning on auth found the freshly-created admin had `cloud_token = NULL`. `build_authenticated_cloud()` then returned `None` and every cloud route degraded: `get_filament_info` skipped its cloud phase entirely and answered `200` from the local-preset and built-in-name fallbacks, while `/cloud/devices` began returning `401`. Nothing surfaced the disconnect. The reporter observed the *symptom inverted* — cloud `400` warnings vanished after enabling auth — and reasonably read that as a fix; in fact the warnings stopped because Bambuddy had stopped calling the cloud at all. The tell is in their own timestamps: the pre-auth request spent ~960 ms on cloud round-trips, the post-auth one answered immediately. **Fix.** `setup_auth()` now migrates a globally-stored token onto the owning admin (and deletes the global rows, so a live credential isn't left at rest in a table nothing reads), and `disable_auth()` performs the mirror hand-off back to global storage. Both refuse to guess when ownership is ambiguous: setup migrates only when it creates the admin or exactly one admin already exists — with several admins it leaves the credential in place and logs a warning rather than handing one admin another's Bambu session; disable declines to overwrite a pre-existing global token. The `region` survives both hops rather than silently resetting to `global`. **Note for existing installs.** The migration runs at the auth on/off transition, so instances that already crossed it must re-link their Bambu account once from Settings → Bambu Cloud; the stranded `bambu_cloud_*` rows in `settings` can then be deleted. **Tests.** 7 integration cases pinning both directions, the two refuse-to-guess paths, the `auth_enabled=false` no-op, and region preservation. **Scope.** No DB migration, no schema change, no new permission, no i18n change.
- **Routine cloud preset misses no longer log at WARNING (#2530)** — The `Failed to get cloud preset … 400 {"message":"missing"}` lines that led to #2530 being filed are an *expected* answer, not a fault, and `get_filament_info`'s Phase 3 already resolves the name from local presets (a bare `GFL05` lands on "Overture Matte PLA" without the cloud). Two routine causes, both confirmed against the live Bambu catalog: many official presets are only addressable with a printer-variant suffix — `GFSA00` and `GFSL99` resolve bare, but `GFSL05` and `GFSG00` exist *only* as `GFSL05_07` (`@BBL A1`), `GFSG00_06` and so on, while the AMS reports the bare ID; and personal presets (`P…`, e.g. `Pb5b7d17`) belong to whichever Bambu account sliced the file, so no other account will ever resolve them. Emitting a WARNING per tray on every AMS tooltip refresh trains operators to ignore the log. `BambuCloudError` now carries the upstream `status_code`, and the preset lookup logs an HTTP 400 at DEBUG while leaving every other failure — expired token, 5xx, connection error — at WARNING, so a genuine fault is still loud. Deliberately *not* fixed here: resolving the variant suffix. The suffix selects a printer profile, and the endpoint returns `pressure_advance` (the K value), which is per-printer — picking a suffix arbitrarily would populate AMS tooltips with another printer's K value, which is worse than the current blank. Doing that correctly requires threading the tray's printer model into `get_filament_info`, which changes the endpoint contract. **Tests.** 4 parametrised cases drive the real route with a stubbed cloud and assert the 400 lands at DEBUG while 401 / 502 / transport failures stay at WARNING; verified by mutation (forcing the classification off fails the 400 case).
- **Printer FTPS and MQTT connections inherited their TLS floor from the OpenSSL build instead of declaring one** — `ImplicitFTP_TLS` (`bambu_ftp.py`) and the MQTT client (`bambu_mqtt.py`) both built their context with `ssl.create_default_context()`, which leaves `minimum_version` at `MINIMUM_SUPPORTED`. What that resolves to is a property of the interpreter's OpenSSL build, not of Bambuddy: measured on identical `OpenSSL 3.5.6`, the `python:3.13-slim-trixie` Docker base reports `TLSVersion.TLSv1_2` while a bare-metal venv reports `MINIMUM_SUPPORTED` — so Docker users have always been floored at TLS 1.2, while bare-metal and appliance installs could in principle negotiate TLS 1.0 or 1.1 with a printer that offered them. **Fix.** Both contexts now set `minimum_version = ssl.TLSVersion.TLSv1_2` explicitly. On the two FTP profiles that also cap `maximum_version` (P2S, X2D — see #1401) this yields an exact TLS 1.2 pin rather than a ceiling over an inherited floor. **Verified against hardware, not just tests.** Probing an X1C and an H2D on both `:990` and `:8883`, each printer completes only on TLS 1.2 and rejects 1.0, 1.1 *and* 1.3 with a `handshake_failure` alert; a live FTPS login through the changed code path succeeds on both with `TLSv1.2` negotiated. Since the shipped Docker image already enforced this floor across the whole install base, no printer or firmware reachable today can be affected by making it explicit. **Also corrected** a stale comment in `ftp_profiles.py` claiming X1C / H2D installs "stay on the negotiated TLS 1.3" — both models refuse 1.3 outright, so `cap_tls_v1_2` is a no-op there; the P2S evidently does offer 1.3, which is why it alone surfaced the vsFTPd session-reuse bug. **Scope.** Two lines plus a comment. No behaviour change on Docker, no DB migration, no new permission, no i18n change; certificate verification is unchanged (printers use self-signed certs, so `check_hostname`/`CERT_NONE` remain by necessity).
- **Backend failed to start on fastapi < 0.116: `AssertionError: Status code 204 must not have a response body`** — `uvicorn backend.app.main:app` aborted at import time while registering `DELETE /api/v1/library/tags/{tag_id}`. The route is declared `status_code=204` with a `-> None` return annotation, and `library_tags.py` uses `from __future__ import annotations` — so the annotation reaches FastAPI as the *string* `"None"`, which `get_typed_annotation()` resolves via `evaluate_forwardref()` to `NoneType`. `NoneType` is a class and therefore truthy, so `APIRoute.__init__` took the `if self.response_model:` branch and asserted that a 204 may carry no response body. fastapi **0.116** added an `if annotation is type(None): return None` guard that makes this benign, which is why CI and the Docker image (both resolve the top of the `>=0.109.0,<0.136.0` range) never saw it — only installs pinned to an older release inside that supported range, such as a venv created before the tag catalog landed in #1268, hit the crash. **Fix.** The route declares `response_model=None` explicitly, which short-circuits the annotation inference on every fastapi version in the supported range. The sibling 204 route (`DELETE /slicer/pipelines/{pipeline_id}`) is unaffected — its module has no `from __future__ import annotations` and no return annotation. **Scope.** Backend-only, one decorator. No behaviour change on fastapi >= 0.116, no DB migration, no new permission, no i18n change. Existing installs can equivalently unblock themselves with `pip install -U -r requirements.txt`.
- **Dependency floors permitted resolutions the code can't run on: `sqlalchemy>=2.0.38`, exact ruff pin** — Two more instances of the same class of defect as the 204 crash above: `requirements.txt` declared floors low enough that a legitimate `pip install -r requirements.txt` could produce an environment Bambuddy fails to start or lint in. CI never caught either, because a fresh runner always resolves to the *top* of every range — only a longer-lived venv resolving lower hits them. **sqlalchemy.** `core/database._create_engine()` passes `pool_size` / `max_overflow` on the SQLite branch. SQLAlchemy **2.0.38** changed the aiosqlite dialect's default pool for file databases from `NullPool` (which rejects both kwargs) to `AsyncAdaptedQueuePool` (which accepts them); on 2.0.0-2.0.37 the module-level `engine = _create_engine()` raises `TypeError: Invalid argument(s) 'pool_size','max_overflow' sent to create_engine()` at import, taking down every SQLite install and the whole test suite (`conftest.py` imports the module). Postgres installs were never affected — `is_sqlite()` is False and the branch is dead. Floor raised to `sqlalchemy>=2.0.38`. **ruff.** The lint job ran a bare `pip install ruff` (always the newest release) while `requirements-dev.txt` said `ruff>=0.8.0`, so CI's linter and a contributor's were routinely *different programs enforcing different rule sets*. A venv holding ruff 0.8.4 reported 32 errors against a tree current ruff calls clean — 30 of them `UP038`, a rule ruff has since **removed** (PEP 604 syntax in `isinstance()` is slower than the tuple form it wanted you to replace). ruff is now pinned exactly (`ruff==0.15.20`) and the CI lint job installs that pin from `requirements-dev.txt`, so local and CI enforce the same rules and `format --check` can't disagree across machines. **Scope.** Packaging + CI only; no application code, no DB migration, no permission, no i18n change. Existing environments should re-run `pip install -U -r requirements.txt -r requirements-dev.txt`.
- **AMS slot with a non-Bambu (no-RFID) spool showed "Empty" instead of "?" (#2527, reporter @NeighborGeek)** — When a spool without a readable RFID tag was loaded, the AMS card showed the slot as **Empty**, while Bambu Studio correctly showed a `?` for an unidentified filament. The reporter's decisive test — swapping the unknown spool between slots and watching "Empty" follow the spool, not the slot — pinned it to slot *content*, not position. Root cause: the authoritative "a spool is physically here" signal is firmware's AMS-level **`tray_exist_bits`** bitmask (what Studio uses to draw the `?`), but Bambuddy inferred emptiness from the *per-tray* `state`/`tray_type`. On the standard AMS (P1-series here, fw 01.09.00.00), a no-RFID spool is reported with an empty `tray_type` and `state=9` — structurally identical to a truly-empty slot at the tray level — so the frontend's `getEmptySlotKind()` classified it as firmware-confirmed-empty and rendered "Empty" rather than the existing `reset` kind that renders `?` ("Spool loaded — slot not configured", #1694). Confirmed from the support bundle: `tray_exist_bits='f'` (all four slots present) with `tray_is_bbl_bits='5'` (only slots 0,2 are Bambu) — slots 1,3 were present-but-non-Bambu, exactly the ones shown Empty. **Fix.** `apply_tray_exist_bits()` — which already parses the bitmask to clear stale fields on absent slots — now also annotates each slot with an authoritative `exists` bool (gated behind a new `annotate_exists` flag so only the printer-card path sets it; the VP bridge leaves it off and the `exists` key never reaches the slicer wire format). `exists` flows through the `AMSTray` schema/serialization to the frontend, where `getEmptySlotKind()` uses it: `exists === true` + no `tray_type` → `?` (present, unconfigured), `exists === false` → Empty, and `exists` absent → the previous `state=9/10` heuristic (so AMS-HT and missing-bitmask paths are unchanged). This is why the bug never reproduced on H2D or X1C — their firmware already reports present-unknown slots with a non-9 `state`, so they fell through to `reset`/`?`; with the fix they take the same path via `exists` and are unaffected. Supersedes the closed #1838. **Tests.** Backend: 3 helper cases (present/absent slots annotated, a present-no-`tray_type` slot marked `exists=true` and left uncleared, and `annotate_exists` off keeps the wire dict clean). Frontend: 1 `AmsUnitCard` case (a `state=9` slot with `exists=true` renders `?`, while `exists=false` still renders "Empty"). Full `test_bambu_mqtt` + VP-bridge suites 384/384 and the AMS/printer/VP backend selection green; `ruff` clean; `npm run build` + ESLint clean; `AmsUnitCard`/`PrintersPage` vitest green. **Scope.** No DB migration, no new permission, no i18n change; VP slicer-facing wire format unchanged.
- **Postgres→SQLite backup dropped NOT NULL / DEFAULT / FK / UNIQUE, causing NULLs after restore (#2526, reporter @bmorrison9)** — On a PostgreSQL install, `create_backup_zip()` exports a portable SQLite copy of the database so backups can move between engines. It rebuilt each table with only column name + type + primary key — the code's own comment admitted "simplified — just column names and types" — dropping `NOT NULL`, `server_default`/`DEFAULT`, foreign keys, and unique constraints. When such a backup is restored onto a SQLite install, `restore_backup()` page-copies the file straight onto the live database (`sqlite3.Connection.backup()`), so the stripped-down schema becomes the *running* database; the post-restore `init_db()` can't repair it because `create_all()` is `CREATE TABLE IF NOT EXISTS` and never alters existing tables. The reporter root-caused it precisely: `SpoolBuddyDevice.created_at` is `server_default=func.now()`, so SQLAlchemy omits the column on INSERT and relies on the DB default — but with no `DEFAULT` clause the row got a bare `NULL`, which then failed Pydantic validation (`DeviceResponse.created_at`) on the next read and 500'd. Every `server_default` column across the schema was exposed the same way, and the FK/unique loss followed from the same simplified CREATE TABLE. **Fix.** The PostgreSQL branch now builds the portable SQLite schema with `Base.metadata.create_all()` against a SQLite engine — the exact DDL a native SQLite install gets — instead of the hand-rolled loop. That emits `NOT NULL`, `DEFAULT` (`server_default=func.now()` → `DEFAULT (CURRENT_TIMESTAMP)`), foreign keys, unique constraints, and indexes, so a Postgres→SQLite restore reproduces the same effective schema a fresh SQLite install would have. The data-export insert path is unchanged, and the `#1333` OIDC-icon guard is preserved automatically — `LargeBinary` renders as `BLOB` under the real DDL — which let the now-redundant `_sqlalchemy_type_to_sqlite_type()` type-mapping helper be removed. This fixes newly-created backups; a backup taken with an older build still carries the degraded schema, so re-take backups after upgrading. **Tests.** The `#1333` type-mapping unit tests were replaced with three that inspect the *real* backup schema (`metadata.create_all` on SQLite, read back via `sqlite_master`/`PRAGMA table_info`): the OIDC `icon_data` column is `BLOB` (#1333), `spoolbuddy_devices.created_at` keeps its `CURRENT_TIMESTAMP` DEFAULT (#2526), and a NOT NULL non-PK column stays NOT NULL. Full backup/restore suite (`test_settings_api`, `test_security`, Postgres-restore-cascade, SQLite-WAL-safety, OIDC-blob-roundtrip) 136/136 green; `ruff` clean. **Scope.** Backend-only, PostgreSQL-source backups. No DB migration, no new permission, no i18n change.
- **"Store on external storage" diagnostic reported an unresolvable fail on P1S/P1P (#2524, reporter @gregspatrick)** — Install-step-4's `external_storage` check hard-**failed** for a P1S even though there is no reachable UI anywhere — Bambu Studio, OrcaSlicer, Handy, or the printer (P1S has no screen) — that can turn the option on. The reporter root-caused it precisely: `has_external_storage()` returns True for the P1S (it does have a MicroSD slot), so the check proceeds to read `state.store_to_sdcard` (MQTT `home_flag` bit 11), which is stuck `False`. The toggle only renders in Studio when the printer publishes `support_save_remote_print_file_to_storage`, and current P1-series firmware (through 01.10.00.00) never does — Bambu's own storage-cache wiki lists P1 Series as "Not Supported". So the user was shown a red fail they could never clear. **Fix.** New `NO_REMOTE_STORAGE_TOGGLE_MODELS` set (P1S, P1P) + `has_remote_storage_toggle()` helper, distinct from the no-slot `NO_EXTERNAL_STORAGE_MODELS` used for A1/A1 Mini (the P1S genuinely *has* a slot — conflating the two would be wrong). When a model has a slot but no reachable toggle and `store_to_sdcard` is False, the diagnostic now emits `skip` with `params={"reason": "unsupported_model"}` instead of `fail`, and the overall result no longer escalates to "problems" for it. A P1S that somehow reports the option *on* still passes. The gate is model-scoped and default-open, so X1/P2S/H2-class printers — where the toggle is reachable and the fail is actionable — are unaffected; if a future P1 firmware surfaces the capability, drop the model from the set and the check reactivates. The frontend `DiagnosticChecklist` picks a reason-specific message variant (`external_storage.skip_unsupported_model`) when a check carries a `reason`, falling back to the plain per-status text otherwise — so instead of the misleading generic "needs a live MQTT connection" skip line, P1 users see an accurate explanation that the option can't be enabled on current firmware and archived prints may lack thumbnails/metadata until Bambu adds support. **i18n.** 1 new key translated across all 11 locales; parity green at 5580 leaves each. **Tests.** Backend: 3 diagnostic cases (P1S/P1P → skip with the reason param, overall stays "ok"; P1S with the option on still passes) + 3 helper cases in `test_printer_models.py` (P1-series false, other models/unknown/empty true). Frontend: 2 `ConnectionDiagnosticModal` cases (reason variant renders and suppresses the generic text; no-reason falls back). Full diagnostic + model suites green; `ruff` clean; `npm run build` + ESLint clean. **Scope.** No DB migration, no new permission.
- **Finish photo still caught the swapped/empty plate intermittently on A1 Mini + SwapMod (#1867 follow-on, reporter @qoatzelcoat)** — The last-layer edge trigger shipped in 0.2.4.9 fixed most cases but the reporter still saw the wrong (post-swap) plate now and then — "nothing changed, just kept adding files to the queue." Root cause, confirmed from the support bundle: this A1 Mini firmware (01.08.01.00) **never emits `stg_cur=22`** — across the whole 35k-line log (24 completions) the only stages it reports are 0/2/3/4/13/14/54/77/255, so every completion falls through to the `FINISH`-state fallback. Bambu only reports `gcode_state=FINISH` *after* the user End G-code runs (the print's last object layer was laid ~2 min before FINISH), so a live grab there is guaranteed to show the SwapMod-ejected plate. The last-layer edge (`layer_num >= total_layer_num` while RUNNING) is the right window but depends on catching **one transient MQTT packet** — if the firmware coalesces or drops the final `layer_num == total` push and jumps straight to FINISH, the edge is missed and it silently reverts to the post-swap grab. That's the intermittency; queued prints run unattended so the misses accumulate. **Fix — bank a frame instead of chasing an edge.** Bambuddy now keeps a rolling "last in-print camera frame" per printer, refreshed on layer change (throttled to ~25 s, always refreshed on the final object layer) via the same snapshot path the finish photo uses — so it honours the `capture_finish_photo` setting and works for external cameras, buffered RTSP, and fresh RTSP grabs alike. Because banking is **layer-driven it freezes automatically the instant printing ends**: the End G-code (plate swap) emits no further `layer_num` increases, so the last banked frame is always the finished print before the swap. On the `FINISH`-state fallback the finish-photo path now prefers the banked frame over a live grab; the `stage_22` and `last_layer` triggers still live-grab (they fire before the swap and give cleaner parked-toolhead framing), and if no banked frame exists it degrades to the old live grab rather than sending a text-only notification. Correctness no longer depends on *which* signal the firmware emits or on catching the edge — a missed edge just means the photo is one layer-frame stale (a finished print, not an empty plate). The bank is cleared on print start so a queued job can't reuse the prior job's frame. **Tests.** 8 new cases in `test_finish_photo_moment_sync.py`: `finish_state` prefers the banked frame and skips the live grab, falls back to live when no bank exists, and `last_layer` ignores the bank; plus 5 for the banking helper — stores while printing, throttles within the interval, always refreshes on the last layer, skips when not RUNNING (the freeze), and skips during calibration sub-stages. Full finish-photo + MQTT + layer-timelapse suites 355/355 green; `ruff check` clean. **Scope.** Backend-only. No DB migration, no new permission, no i18n change.
- **P1/A1 camera stayed black on load until a ~20-minute self-heal (#2521, reporter @nnimby848)** — On chamber-image printers (P1S/A1, port 6000) the camera view frequently came up black on every load/reload and only recovered ~20 min later. The reporter supplied excellent evidence — backend logs, tcpdump (frames actively flowing on port 6000), and a HAR — and correctly identified the trigger: the viewer mounts twice in quick succession (React StrictMode + a self-inflicted reconnect loop), so a short-lived first viewer attaches and detaches within tens of ms while a second viewer persists. Their proposed mechanism (the connection being "attributed" to the dead viewer's trace ID) was a misread of the architecture — `camera_fanout.py` is a **shared** fan-out (one upstream socket per printer, keyed `{id}-fanout`), so only the first subscriber logs "Starting/connected" and every later viewer taps the same pump; the trace ID in the log is just `contextvars` context, and the HAR `status:0` is a mid-stream capture artifact, not a missing response. The real defects were two, both real: **(1) Late-subscriber cold-start.** Every viewer after the first got a fresh empty queue and had to wait for the *next* upstream frame; on a slow chamber cam plus the churn the `<img>` never fired `onLoad`, so the page's stall-detector reconnected every few seconds, minting yet another short-lived subscriber — a self-sustaining loop. **(2) Single-connection socket overlap.** Port 6000 allows one connection; the churn tore the upstream down and reopened it, and a replacement broadcaster could open a **new** socket before the old one finished closing (`_grace_then_stop` exposed `stopped=True` before the pump's socket-close `finally` completed). The printer kept feeding the orphaned socket and starved the live one until its TCP keepalive reaped it — the ~20 min self-heal. **Fixes.** *Backend fan-out:* the broadcaster now remembers the last chunk it pumped and **primes a late/surviving subscriber with it on `subscribe()`**, so any viewer after the first renders a frame instantly (fires `onLoad`, resets the reconnect loop, ends the churn); and a replacement broadcaster's **pump now waits for the displaced broadcaster's upstream socket to fully close** (`wait_until_torn_down()`, set only after the pump's cancellation + socket-close `finally`) before it dials the printer, so two sockets to a single-connection printer never overlap. Guarding at the pump rather than at `get_or_create_broadcaster` keeps it correct when concurrent viewers race to replace the same stopped broadcaster — only the single pump dials — and it's bounded by a 10 s cap so a wedged close degrades to the old behaviour instead of never producing a frame. *Frontend (`CameraPage`):* the stall-detector now requires **two consecutive** stalled/inactive status reads (~10 s) before reconnecting, so a single blip during fan-out startup/handover no longer nukes a stream that's about to deliver frames; the strike counter resets on a rendered frame and on each fresh load. **Tests.** 6 new fan-out unit cases in `test_camera_fanout.py` — late subscriber primed with last frame, first subscriber not primed, `wait_until_torn_down` completes after shutdown, the replacement barrier blocks until the prior teardown completes, and the barrier's bounded-timeout fallback. Full camera suite (fan-out + `test_camera_api` + stderr-summary) 70/70 green; `ruff check` clean; frontend `npm run build` + ESLint clean; existing 13 `CameraPage` cases stay green. **Scope.** No DB migration, no new permission, no new i18n key. The single-connection socket-overlap fix also benefits any single-camera-slot model (e.g. X2D on firmware that permits one connection). If the black screen ever persists on a specific firmware, a per-frame debug counter or `ss -tn | grep :6000` during the episode would confirm whether the upstream is delivering frames — but priming + teardown discipline address both observed mechanisms.
- **Scanning an external folder no longer deletes the README.md record (and now indexes pre-existing markdown) (#2520, reporter @zumik3-del)** — The Folder Readme panel (#1268) worked for a `README.md` uploaded through Bambuddy's Upload button, but clicking **Scan External Folder** afterwards made the panel vanish. The reporter root-caused it precisely: `.md` was absent from `_SCANNABLE_EXTENSIONS` (`backend/app/api/routes/library.py:1342`), so the `os.walk` pass skipped markdown files (`:1619`) and never added them to `found_paths` — and the end-of-scan cleanup loop deleted any existing external `LibraryFile` whose path wasn't in `found_paths` (`:1724`), assuming it had been removed from disk. The md file was untouched on disk; only its DB row was destroyed, after which the readme endpoint (`GET /folders/{id}/readme`, which matches `filename LIKE '%.md'`) 404'd and the panel hid. **Two-part fix.** **(1)** Added `.md` to `_SCANNABLE_EXTENSIONS`, so the scan now *indexes* markdown that already exists on disk — markdown dropped in by external tools or copied in manually (feature-request item 1 in the same issue) is picked up and shown, and an uploaded md file is re-found instead of being treated as deleted. `.md` classifies as `file_type="md"` and hits none of the 3mf/gcode/image thumbnail gates, so it just creates a plain record. **(2)** Hardened the cleanup loop to gate deletion on actual disk presence (`path_str not in found_paths and not os.path.exists(path_str)`) rather than mere absence from the extension-filtered `found_paths`. This closes the broader class the reporter flagged: *any* file the upload path admitted whose extension is outside the scannable set (e.g. a `.txt` note) would previously be purged from the DB on the next scan even though it still exists on disk — now such records survive, while genuinely-deleted files (absent from disk) are still cleaned up. **Tests.** 3 new cases in `test_external_folders_api.py::TestExternalFolderScan`: a pre-existing `README.md` on disk is discovered by scan and served by the readme endpoint; an uploaded `README.md` survives a scan (`removed == 0`) and the panel still resolves it — the exact reported bug; a non-scannable `.txt` upload survives a scan via the disk-presence guard. Full suite 39/39 green; `ruff check backend/` clean. **Scope.** Backend-only. No DB migration, no new permission, no i18n change. Item 2 of the issue (the readme panel layout) is addressed in the separate frontend entry below.
- **Folder README panel no longer crowds out the file list — now a collapsible right-hand rail (#2520 item 2, reporter @zumik3-del)** — The Folder Readme panel (#1268) rendered as a full-width block stacked *above* the file grid, so on a laptop a moderately long README pushed the actual model files (3MF/STL) below the fold, and — because the file list scrolls in its own container on wide screens — there was no single page scroll to get past it; you had to scroll inside the README separately. **Fix.** On wide screens (`lg+`) the panel now docks as a fixed-width **right-hand column** (`w-80` / `xl:w-96`) beside the file list instead of on top of it, so files stay visible and the README scrolls within its own full-height rail. On narrow screens it stacks above the list (`order-first`) where the page itself scrolls (the reporter's simpler Option A, which is the right behaviour for phones). The panel is **collapsible** — a header toggle shrinks it to a thin vertical strip (desktop) / slim bar (mobile) with a one-click reopen — and the collapsed/expanded choice is **persisted to `localStorage`** so hiding it once keeps it hidden across folder switches and reloads (the reporter's Option B — "open it when you need the description, then hide it to free up space"). Implementation: `FolderReadmePanel` gains the responsive rail layout + persisted collapse state; `FileManagerPage` wraps the files column and the panel in a `flex-col lg:flex-row` content wrapper so the panel is a sibling *column* of the list rather than a block *inside* it. **i18n.** 3 new keys (`fileManager.readme.show` / `.hide` / `.label`) translated across all 11 locales (`.label` is the proper-noun filename "README", identical by design); parity check green at 5579 leaves per locale. **Tests.** 2 new cases in `FolderReadmePanel.test.tsx`: collapsing hides the markdown body, exposes a reopen control, and persists the choice; a persisted-collapsed preference starts the panel collapsed. Existing 3 panel cases + 51 `FileManagerPage` cases stay green; `npm run build` and ESLint clean. **Scope.** Frontend-only. No backend change, no DB migration, no new permission.
- **Nozzle sizes other than 0.4mm now fully supported in AMS Slot config + pre-dispatch guard (#1899, reporter @TheUltimateC0der; also hit by @icaisolutionsb2b-hub on X2D)** — On an H2S (or any printer) with a 0.6mm nozzle installed, the **Configure AMS Slot** picker only ever offered 0.4mm filament presets, so trays couldn't be set to the profile that matched the slice, and dispatching the 0.6-sliced job made the printer bail out with the cryptic HMS `_8012` "Failed to get AMS mapping table". Two distinct gaps. **(1) The slot picker was hardwired to 0.4mm.** `ConfigureAmsSlotModal` takes a `nozzleDiameter` prop that defaults to `'0.4'` (`ConfigureAmsSlotModal.tsx:287`) and drives both the local-preset compatibility filter (it builds `"Bambu Lab H2S 0.4 nozzle"` and rejects imported 0.6 presets whose `compatible_printers` lists "…0.6 nozzle") and the K-profile query. Neither call site — `PrintersPage.tsx` nor the SpoolBuddy kiosk's `SpoolBuddyAmsPage.tsx` — ever passed the prop, so the modal assumed 0.4 regardless of the hardware. The real installed diameter was already in scope on the printer status (`status.nozzles[0].nozzle_diameter`, the same field that renders the "• 0.6mm" badge on the card). **Fix:** new `resolveSlotNozzleDiameter(status, amsId)` helper in `utils/amsHelpers.ts` reads the installed nozzle for a given AMS — on dual-nozzle printers (H2D) it resolves the specific nozzle feeding that AMS via `ams_extruder_map[amsId] → nozzles[idx]`, on single-nozzle printers it falls back to the primary nozzle, and it returns `undefined` when the printer hasn't reported nozzle hardware yet so the modal keeps its 0.4 default. Both call sites now pass `nozzleDiameter={resolveSlotNozzleDiameter(status, slot.amsId)}`, so the picker filters presets by the nozzle actually on the machine. **(2) No pre-dispatch validation of nozzle size.** Nothing in the dispatch path (`_compute_ams_mapping_for_printer` / `_match_filaments_to_slots`) ever compared the sliced nozzle diameter against the installed nozzle — the AMS mapping matches on `tray_info_idx` → colour → type with a hard filter only on extruder id, never diameter — so Bambuddy would ship a mapping the firmware then rejects with `_8012` (or `0500_4038`), leaving the user staring at a printer-side error with no explanation. **Fix:** a nozzle-mismatch guard in `_start_print` (backend), placed before preheat and upload so no time is wasted, compares `archive.nozzle_diameter` (parsed from the sliced 3MF's `slice_info`; `None` when the slice doesn't declare it) against the printer's reported nozzles via two pure helpers `_installed_nozzle_diameters()` and `_nozzle_mismatch_message()`. On a positive mismatch it fails the queue item with an actionable message — "File sliced for a 0.6mm nozzle, but the printer has 0.4mm installed. Re-slice for the installed nozzle, or install the matching nozzle before printing." — and fires the same failed-notification + WS event as other dispatch failures. **Fail-safe by construction:** it blocks ONLY on a positive mismatch — when the slice carries no nozzle diameter, or the printer hasn't reported its nozzles, the guard is a no-op and dispatch proceeds exactly as before; on dual-nozzle printers a match against EITHER installed nozzle passes (a 0.6 slice is fine if one of the two hotends is a 0.6). The 0.05mm tolerance absorbs float noise while staying well inside the 0.2mm gap between adjacent nozzle sizes. **Tests.** Frontend: 7 cases in `resolveSlotNozzleDiameter.test.ts` (null/empty status, single-nozzle, dual-nozzle per-AMS resolution, fallbacks). Backend: 15 cases in `test_scheduler_nozzle_mismatch.py` — 5 for `_installed_nozzle_diameters` (parse, empty-default stub, unparseable/zero, dual-nozzle), 8 for `_nozzle_mismatch_message` (block/pass, float tolerance, dual-nozzle either-match, both fail-safe None paths, adjacent-size discrimination), and 2 end-to-end `_start_print` cases proving a mismatch fails the item *before* upload/start_print and a match lets dispatch proceed. Existing scheduler suites (cleanup-library, ams-mapping, cancel-race, preheat — 118 tests) stay green, which also proves the guard is a transparent no-op on the existing archive-without-nozzle path. `npm run build`, ESLint, `ruff check backend/` all clean. **Scope.** No DB migration, no new permission, no new i18n key (the failure message rides the existing `error_message` surface already rendered on failed queue items). Frontend picker change + backend guard only.
- **"Remember Me" appeared broken — an authenticated visit to `/login` rendered the login form instead of redirecting (#1889, reporter @superdong69)** — Users with a perfectly valid, persisted session reported that Bambuddy "never stays logged in": they log in with Remember Me, come back later, and are met with the login form again. The reporter did the legwork and traced it to routing, not session persistence: `frontend/src/pages/LoginPage.tsx` destructured only `const { login, loginWithToken } = useAuth()` and never looked at the authenticated state, so the `/login` route (rendered unwrapped in `App.tsx` — `ProtectedRoute` only guards the *other* direction, unauthenticated → `/login`) showed the credentials step even when the token was live. On that same page load the app's own bootstrap sends `GET /api/v1/auth/me` with the Bearer token and gets a 200 with the full user object — the session is fully alive; only the view is wrong. **Why it's easy to hit and self-reinforcing.** After a few visits the browser address bar autocompletes the origin to its most-visited path, which becomes `/login`, so every subsequent visit lands on the form and the illusion of "logged out" compounds. Navigating to `/` instead lands on the dashboard, logged in, no credentials asked — which is also why it can't be reproduced by testing `/` directly. **Fix.** `LoginPage` now also reads `user` and `loading` from the auth context and, in a `useEffect`, redirects an already-authenticated visitor with `navigate('/', { replace: true })` once the auth check has settled. The effect is gated on `step === 'credentials'` so it never interrupts the 2FA step or the OIDC-callback branch, both of which perform their own `navigate()` after `loginWithToken`. It redirects to `/` rather than `resolvePostLoginRedirect()` so it can't consume the OIDC redirect stash — an already-authenticated direct visit has no pending redirect to honour. **Tests.** 2 new cases in `LoginPage.test.tsx` (`authenticated redirect (#1889)`): a live session (token set + `/auth/me` → 200) redirects to `/` with `replace: true`; an unauthenticated visit renders the Sign in form and does not redirect. Existing 29 LoginPage cases stay green; `npm run build` and ESLint clean. **Scope.** Frontend-only, routing layer. No backend change, no DB migration, no new permission, no new i18n key. Note this is the routing facet of #1889; the separate token-discard-on-transient-failure hardening in `AuthContext` (don't drop a valid persisted token on a non-401 blip) is already in the tree.
- **Multi-nozzle prints no longer collapse all filaments onto one nozzle (#1825, reporter @needo37)** — The single-active-extruder shortcut added in #851 (for #827) at `threemf_tools.py:354` runs `before` the per-filament `group_id` mapping, and fires whenever `extruder_nozzle_stats` reports exactly one extruder as having a nozzle installed. On the H2D / H2D Pro / X2D (2-nozzle) and H2C (3+-nozzle tool-changer), this field is data-driven from the slicer profile's enumerated nozzle volume types — when an HT-AMS or High-Flow nozzle's type isn't enumerated in the slice's profile (common with asymmetric extruder setups, e.g. HT-AMS feeding the right nozzle on an H2D), the slicer emits e.g. `['Standard#1', 'Standard#0']` even though the print genuinely uses both extruders. `sum(active_extruders) == 1` triggered → every filament was force-assigned to `physical_extruder_map[active_idx]`, the authoritative per-filament `group_id` was discarded, and the Filament Mapping panel showed both filaments badged **L** with the auto-match hard filter (`print_scheduler.py` `_compute_ams_mapping_for_printer` ~line 1239) blocking the wrong-nozzle tray as "Type not found". Bug is **parser-side and model-agnostic** — triggers purely on 3MF data shape, not on the attached AMS hardware: regular dual-AMS H2D installs typically slice to `['Standard#1', 'Standard#1']` (sum==2) and never enter the buggy branch, which is why this bug was invisible on the most common dual-AMS setup. Physical nozzle routing was **not** affected — the actual extrude path comes from the sliced gcode + the verbatim `nozzle_mapping` from the project_file (#1780), not from this parse — so the bug surfaced as auto-match failure + wrong L/R badge, not wrong-nozzle extrusion. **Fix.** Gate the single-active shortcut on `len(distinct_group_ids) <= 1` from `slice_info.config`. The slice_info parse is hoisted above the shortcut check (and reused by Priority 1) so the gate adds zero extra I/O. When the slice contains ≥2 distinct group_ids, the shortcut skips and the existing `group_id`-based Priority 1 mapping runs. The gate only **narrows** the shortcut path — it can't widen the buggy collapse onto any previously-working slice. The same condition generalizes to H2C and any future N-nozzle printer for free (no nozzle-count branching). **Tests.** Two new cases in `TestExtractNozzleMappingFrom3MF`: `test_single_active_under_report_with_multi_group_falls_through` pins the #1825 regression (`['Standard#1','Standard#0']` + group_ids `{0,1}` → `{1:1, 2:0}` not `{1:1, 2:1}`); `test_single_active_with_single_group_still_uses_shortcut` preserves the #851 behaviour (same stats + only `group_id=0` → shortcut still fires → `{1:1, 2:1}`). Existing `test_single_active_extruder_maps_all_slots` and `test_two_active_extruders_falls_through` stay green. **Suites.** `pytest -n 30 backend/tests/unit/test_scheduler_ams_mapping.py backend/tests/unit/test_scheduler_filament_deficit.py backend/tests/unit/test_scheduler_filament_override.py backend/tests/unit/test_fallback_archive_mqtt_filament.py backend/tests/integration/test_archives_api.py backend/tests/integration/test_library_api.py` 272/272 green. `ruff check backend/` clean. **Scope.** Backend-only, parse layer. No DB migration. No new permission. No frontend change. The L/R-only badge limitation on 3+-nozzle printers (H2C tool-changer) called out in the report is a separate cosmetic follow-up and not part of this fix.
- **HMS Action buttons now reach the printer (#1830, H2D/H2C wrong-plate verification)** — The HMS Actions feature shipped in #1743 looked correct at the publish layer but the firmware silently dropped the commands at the printer, so clicking "Stop printing", "Problem solved and resume", or "Ignore and resume" did nothing visible on the live H2D — the modal kept reappearing, the print stayed paused, and the route still returned `200 OK`. Three independent bugs combined into one user-facing failure. **(1) Wrong command shape for resume / stop.** `hms_resume()` and `hms_stop()` sent the documented-but-not-actually-used `{"err": <short>, "param": "reserve", "job_id": <subtask_id>, ...}` shape that BambuStudio never produces. Bambu firmware rejects this silently — verified by injecting candidate shapes on `device/<sn>/request` against a live H2D paused on a wrong-plate HMS: the `err`-bearing shape held PAUSE → PAUSE for the full window, the plain `{"print":{"command":"stop","param":"","sequence_id":"0"}}` transitioned PAUSE → FAILED in 1.7s, the same plain `resume` transitioned PAUSE → RUNNING in <2s. Fix: both helpers send the plain shape now, no `err`, no `job_id`, no `param:"reserve"`. **(2) `IGNORE_RESUME` mapped to the wrong command for paused prints.** The original mapping dispatched `idle_ignore` for both `IGNORE_RESUME` and `NO_REMINDER_NEXT_TIME`. `idle_ignore` is BambuStudio's "dismiss this warning" command and only works for non-pause warnings — verified against the H2D, idle_ignore on a paused print is silently rejected regardless of `err`. `hms_ignore()` now branches on `self.state.gcode_state == "PAUSE"`: paused → dispatch plain `resume` (which is what the button actually means on a paused print), running/idle → keep `idle_ignore` with the `type=0/1` persistence flag. `DONT_REMIND_NEXT_TIME` on PAUSE degrades to resume too — the "don't remind" flag can't ride along on a resume but the user's clicked-action intent (continue printing) is honoured. **(3) 64-bit `hms[]`-array faults truncated to a non-matching `err` (#1830 §(1)).** The hms[] parser at line 2740 built the short code as `f"{(attr >> 16) & 0xFFFF:04X}_{code & 0xFFFF:04X}"`, discarding 32 of the 64 bits of the fault identifier. For codes whose full form is e.g. `0C00_0300_0002_000C`, the truncated `0C00000C` doesn't match what the firmware compares against in `idle_ignore`. New `HMSError.full_code` field carries the canonical hex identifier — 16 chars `f"{attr:08X}{code:08X}"` for hms[]-sourced faults, 8 chars `f"{print_error:08X}"` for print_error-sourced faults (which are already 32-bit). Catalog lookup tries the 16-char form first and falls back to the 8-char short code so existing entries keep matching. Frontend echoes `error.full_code` back as `HmsActionBody.print_error` instead of recomputing the short code; the schema's pattern relaxes to `^[0-9A-Fa-f]{8}([0-9A-Fa-f]{8})?$` to accept both lengths. **(4) Masking failure — publish-success returned as printer-ack (#1830 §(3)).** `execute_hms_action` returned True the moment the publish succeeded, so any of the three bugs above produced `200 OK` while the printer ignored the command and the modal kept popping. The `/hms/execute-action` route now snapshots `(gcode_state, print_error, hms_errors count)` before dispatch, awaits `HMS_ACTION_ACK_WAIT_SECONDS` (default 2.5s, module-level so tests override), and returns `502 "Printer did not acknowledge HMS action within 2.5s"` if none of those moved. Every accepted HMS action mutates at least one of the three, so this is a clean signal. **Empirical verification.** A test harness on `device/0948BB540200427/request` confirmed each shape against the live H2D: a print sent with deliberately-wrong build plate raises `print_error=0x05008051` ("Detected build plate is not the same as the Gcode file"), the printer enters `gcode_state=PAUSE`, and the new command shapes transition out correctly. The current Bambuddy code (before this fix) failed to act on every button. **Tests.** `test_hms_actions.py` shape assertions rewritten — `test_resume_is_plain_no_err_no_job_id`, `test_stop_is_plain_no_err_no_job_id`, `test_ignore_resume_dispatches_resume_when_print_paused`, `test_ignore_resume_uses_idle_ignore_when_not_paused`, `test_dont_remind_dispatches_resume_when_paused`, `test_dont_remind_uses_idle_ignore_type_one_when_not_paused`, `test_idle_ignore_accepts_16_char_full_code`. New `TestHMSFullCode` class in `test_bambu_mqtt.py` pins the parser contract — `test_hms_array_path_populates_16_char_full_code`, `test_print_error_path_populates_8_char_full_code`, `test_hms_array_catalog_lookup_tries_16_char_first`, `test_hms_array_catalog_falls_back_to_8_char`. New integration cases in `test_printers_api.py` — `test_execute_hms_action_no_printer_ack_returns_502`, `test_execute_hms_action_accepts_16_char_full_code`. The malformed-input test now covers 9- and 15-char rejections (the relaxed pattern accepts 8 OR 16, nothing in between). `pytest -n 30 backend/tests/unit/services/test_hms_actions.py backend/tests/unit/services/test_bambu_mqtt.py backend/tests/unit/services/test_printer_manager.py backend/tests/integration/test_printers_api.py` green (509 + 181). `ruff check` clean. Frontend `npm run build` clean. **Scope.** No DB migration. No new permission. No new i18n key — the frontend toast on action failure already uses the existing `hmsErrors.actionFailed` string, which now gets the more accurate "Printer did not acknowledge" message instead of "Failed to send action". The `HMSError.full_code` field defaults to `""` so old in-memory state surviving a backend upgrade (without an MQTT reconnect) degrades to the existing 8-char short code via the frontend's `||` fallback.
- **Queue Start/Stop permission gates + ASAP race + /reorder validator (#1625-followup)** — Three issues caught in the post-merge audit of the unified-dispatch PR; all pre-existed on `dev` but became more impactful once every print routes through the queue. **(1) Start/Stop ownership gates.** `POST /queue/{id}/stop` required `QUEUE_UPDATE_ALL` (admin-only) and `POST /queue/{id}/start` required `QUEUE_UPDATE_OWN` with no actual ownership check. Net result: Operators saw the Stop button in the queue UI but got 403 on click; meanwhile any _OWN holder could start anyone's queue item via direct API. Both routes now use `require_ownership_permission(QUEUE_UPDATE_ALL, QUEUE_UPDATE_OWN)` with explicit ownership matching, mirroring `/cancel`. Stop is strict (mirrors cancel — _OWN cannot stop unowned items because stop is destructive and there's no claim semantic). Start is softer (preserves #1670's VP-import flow — _OWN can start NULL-owner items and claim ownership at click-time). Frontend `QueuePage.tsx` Start and Stop buttons flip from `hasPermission('printers:control')` to `canModify('queue', 'update', item.created_by_id)` so the FE matches the BE behaviour exactly. **(2) ASAP TOCTOU race.** Concurrent ASAP inserts to the same printer scope could both compute `MAX(position)` from before the other commits — in a non-empty scope, Postgres's row-level locks on the UPDATE shift serialise naturally, but the empty-scope path has no rows to lock, so both transactions inserted at `position=1` (duplicate). The fix wraps the read+update in a Postgres `pg_advisory_xact_lock(1625, scope_key)` where `scope_key = printer_id or 0`. Transaction-scoped, released automatically at commit/rollback, namespaced by 1625 so it can't collide with other advisory locks elsewhere in the codebase. Different printers don't contend. SQLite serializes writes implicitly so this is a no-op there. **(3) /reorder duplicate-position validator.** `POST /queue/reorder` set `item.position = reorder_item.position` in a loop without uniqueness validation — a buggy drag-drop client sending two items at the same position would leave the queue with ambiguous ordering (the scheduler's `ORDER BY (printer_id, position)` ties break by physical row order, making dispatch non-deterministic). New `model_validator(mode="after")` on `PrintQueueReorder` rejects the payload at the schema layer with 422 + "Duplicate positions in reorder request: [N, …]" so the FE can surface the actionable detail. Uniqueness is enforced WITHIN the payload only — cross-printer reorders that intentionally share positions across different printer queues are a non-goal of the drag-drop UI, so this is the right scope. **Tests.** 7 new integration cases in `test_ownership_permissions.py::TestQueueOwnershipPermissions`: operator can start own item, operator cannot start others' item, operator can start unowned item and claims ownership (#1670 regression guard), operator can stop own printing item, operator cannot stop others' printing item, operator cannot stop unowned printing item, admin can stop unowned printing item. 2 new integration cases in `test_print_queue_api.py::TestReorderEndpoint`: 422 on duplicate positions with "duplicate" surfaced in the detail; 200 on unique positions with positions actually updated in the DB. **Scope.** No DB migration, no new permission, no i18n string change (existing `noStopPrint` / `noStartPrint` keys cover the new ownership-mismatch case verbatim). The advisory lock is Postgres-only and held inside the existing request transaction; SQLite path is unchanged. The /reorder validator runs before the DB session opens any rows.
- **AMS drying "Rotate spool" toggle no longer offered when any tray is threaded out** — The drying popover's "Rotate spool during drying" toggle was always clickable, but rotation is mechanically impossible whenever any tray in the targeted AMS has its filament threaded out into the feed tube. The whole AMS rotates as one mechanism (all 4 spools turn together), so a single loaded slot locks the entire unit. The firmware enforces this (rejects with `dry_sf_reason=[3]` "ConsumableAtAmsOutlet", surfaced as a 409 toast in `routes/printers.py:1754`), but the user got to the failure only after clicking Start. The new mid-print drying path (above) makes it worse — the temptation to click rotate during a print is now reachable. **Gate signal.** Per-tray Bambu `state`: `9` = empty, `10` = spool present but NOT loaded into tube (rotation possible), `11` = loaded into tube (rotation impossible). `PrintersPage.tsx` derives `trayLoadedInThisAms = (targetAms?.tray ?? []).some(t => t.state === 11)` using the existing `amsData` array (already cached against MQTT flicker). **Why `tray.state === 11` and not the printer-level `tray_now`.** A first cut of this gate keyed on `tray_now` (the global slot currently feeding the toolhead) — but on the H2D, after a print finishes the firmware resets `tray_now` to 255 (nothing actively feeding) while leaving the filament threaded into the feed tube. The tray's `state` stays at `11` in that idle-but-threaded condition; `tray_now` does not. Reported live by a user with all AMS units showing loaded spools and the rotate toggle still active. **Per-AMS isolation preserved.** AMS-A having a tray in state 11 does NOT disable rotation on AMS-B — both can dry, and AMS-B's mechanism is still free. **Submission clamp.** The Start handler also clamps `rotateTray: dryingRotateTray && !trayLoadedInThisAms` before mutating, so a sequence of "user enables rotate on AMS-B → user loads filament from a slot in AMS-B while popover is open → user clicks Start" can't leak `rotate_tray=true` through to the firmware. Without the clamp, the firmware-side rejection would still catch it, but the user would see a 409 toast for a mistake they couldn't have known about. **Conservative on missing state.** Trays with `state === undefined` (older firmware that doesn't populate the field) are treated as not-loaded — rotation stays available and the firmware-side `dry_sf_reason` check remains the safety net. **i18n.** 1 new key (`printers.drying.rotateUnavailableReason`) translated in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). Parity check 5355 leaves per locale, no English fallback. **Tests.** 9 new cases in `PrintersPageDrying.test.ts::rotate tray gate` cover: null `targetAmsId` (modal closed) → false; AMS id not in amsData → false; all trays empty (state=9) → false; all trays spool-present-not-loaded (state=10) → false (the case the user reported was firing incorrectly); any tray loaded (state=11) → true; per-AMS isolation (loaded AMS-A leaves AMS-B free); missing `tray` array → false; missing `state` field → false (conservative default-allow); submission clamp collapses to false when gate active, passes through when inactive. Vitest 41/41 green. Frontend `npm run build` clean.
- **Archives drag-and-drop overlay stuck after cancel (#1510, reported by @maikolscripts)** — Cancelling a drag on the Archives page — by dragging back out of the browser window, releasing outside the page, or pressing Escape mid-drag — left the full-screen "Drop .3mf files here" overlay visible until the user refreshed. **Cause.** The old inline `handleDragLeave` only hid the overlay when `e.currentTarget === e.target` (i.e. the dragLeave event fired on the wrapper itself, not a child). That condition was structurally safe for crossing internal element boundaries but rarely held for the three cancel paths above — drag-out-of-window fires dragLeave with `target` at the nearest child to the cursor; Escape and drag-abort fire no leave event at all on the wrapper. **Fix.** Moved the page-wide drop handling into the new `usePageFileDrop` hook (also consumed by File Manager — see the linked Added entry). The hook checks `relatedTarget` containment instead of `currentTarget === target`, and adds document-level `drop` / `dragend` / `keydown(Escape)` listeners that only register while `isDraggingOver === true` so the cancel paths all reset uniformly. Three of the 13 new hook test cases pin the cancel paths explicitly so a future regression on any one of them fails its own case. Also moved the previously-hardcoded English "Drop .3mf files here" string in `ArchivesPage.tsx:3202` to the existing `archives.page.dropFilesHere` i18n key (which already had translations in all 11 locales) so the overlay localises correctly — same change of behaviour as `archives.releaseToUpload` already had.
- **File Manager list-view column headers misaligned with their body cells** — Both the header row and each list row used the same `grid-cols-[auto_1fr_120px_100px_100px_100px_min-content]` template — looked correct at the CSS level — but the two `<div>`s were **sibling grids**, not a shared grid, so each computed `min-content` for the trailing actions column independently. The header's trailing column is an empty `<div />` → `min-content` resolved to 0; body rows had 4–7 action icons → `min-content` resolved to ~220px. With different trailing widths, the `1fr` Name column got a different amount of room in each grid, which pushed every fixed column to its right (`Uploaded By`, `Type`, `Size`, `Prints`) further right in the header than in the body. Visually the body cells looked **shifted left** of their column headers. **Fix.** Replaced the trailing `min-content` with a fixed `220px` in both the auth-enabled and auth-disabled grid templates (matching the comment that already documented the expected width of the 7-icon strip on sliced 3MFs). Updated the explanatory comment with the sibling-grid pitfall so the next person doesn't re-introduce it. No tests changed; the misalignment was purely visual (no DOM ordering / interaction changed), and the existing 51 FileManagerPage tests stay green.
- **MakerWorld import/resolve/status fail under API-key auth even when the owner has a Bambu Cloud login (#1777, reported by @Mx772)** — The reporter (working on a browser extension that drives Bambuddy via `X-API-Key`) noticed that `POST /api/v1/makerworld/import` and `POST /api/v1/makerworld/resolve` returned `{"detail":"Downloading files from MakerWorld requires a Bambu Cloud login"}` even when the key's owning user had a valid stored Bambu Cloud session, and the same imports succeeded from the web UI. Root cause is exactly the shape the reporter traced: `require_permission_if_auth_enabled` in `backend/app/core/auth.py:1414` deliberately returns `current_user=None` for API-keyed callers — the comment at line 1408 makes this explicit and points at `cloud.py` for the resolver. The MakerWorld routes never got that resolver wired in, so `_build_service(db, None)` → `get_stored_token(db, None)` → no token → the "requires Bambu Cloud login" branch fires regardless of what the owning account has set up. Same shape #1182 fixed for cloud slicer presets, and the canonical fix for non-`/cloud/*` routes is already in the codebase as `resolve_api_key_cloud_owner` (cloud.py:128-160) — used by `slicer_presets.py:491` and `library.py:3871`. The MakerWorld routes were missing the wire-up. **Fix:** Three routes get the extra `api_key_cloud_owner: User | None = Depends(resolve_api_key_cloud_owner)` parameter — `get_status`, `resolve_url`, `import_instance` — and each resolves `cloud_token_user = current_user or api_key_cloud_owner` before calling `get_stored_token` / `_build_service`. `import_instance` additionally uses `cloud_token_user.id` for the `owner_id` argument to `save_3mf_bytes_to_library` (which translates to `LibraryFile.created_by_id`), so library rows imported via API key are now attributed to the key's owner instead of staying NULL. `/recent-imports` is unchanged — it only uses `current_user` as a permission gate (`_ = current_user`) and never touches the cloud token. The fix preserves fail-closed semantics for keys *without* the `can_access_cloud` flag: `resolve_api_key_cloud_owner` already fences on `api_key.user_id is not None and api_key.can_access_cloud` (cloud.py:158), so a key with only the per-route scope (`can_read_status` / `can_manage_library`) still surfaces the "requires Bambu Cloud login" error path — no new auth gap. **Two scope fields the API key needs:** the per-route scope (`MAKERWORLD_VIEW` → `can_read_status`, `MAKERWORLD_IMPORT` → `can_manage_library` per `_APIKEY_SCOPE_BY_PERMISSION` in `core/auth.py`) AND the orthogonal `can_access_cloud` flag (separate column on the `api_keys` table). The fix doesn't change that surface — it just stops dropping valid `can_access_cloud=True` keys on the floor. **Tests:** 6 new cases in `backend/tests/integration/test_makerworld_apikey_auth.py` pinning the full surface — API key with `can_access_cloud=True` + owner-has-token → `/status` reports `has_cloud_token=True`, `/resolve` builds the service with the owner User (asserted on the `_build_service` mock's call args), `/import` succeeds end-to-end and the resulting `LibraryFile.created_by_id` matches the API-key owner; API key with `can_access_cloud=False` → status still reports `has_cloud_token=False` (no widening) and import-row's `created_by_id` stays NULL; JWT-authenticated parity check confirms the existing user-session flow is unchanged by the added `Depends`. 6/6 new tests green; full backend suite (6157 tests) still green; ruff clean. No frontend change, no DB migration, no new permission, no new dependency. The reporter's browser extension and any other API-keyed Home Assistant / automation integration unblocks immediately on next deploy.
- **PrintModal printer picker no longer offers a printer between dispatch-accept and PRINT_START (reported off-list by a corporate user running multi-operator farm shifts)** — Operator picks a printer in the reprint modal, hits Send, Bambuddy accepts the dispatch and begins FTP upload + sending the print command. The printer hasn't reported `gcode_state=RUNNING` yet — it's still IDLE on its own MQTT status. A second operator opening the modal during this window sees the same printer as available and submits a second job. The backend correctly rejects the second submit with HTTP 409 (`background_dispatch._dispatch` rejects when `_queued_jobs` or `_active_jobs` already holds the printer_id), so no double-print is possible, but the operator only finds out after they click Send — wasted minutes per attempt on a busy floor. **Root cause:** `PrinterSelector.tsx::isPrinterBusy` consulted only `PrinterStatus.state` against `AVAILABLE_STATES = {IDLE, FINISH, FAILED}`. PRINT_START is the only signal that flips the printer out of IDLE, and there's a real wall-clock window (upload time + print command + firmware ack) between dispatch acceptance and that flip. The dispatch-queue state — already broadcast as a WebSocket `background_dispatch` push including `dispatched_jobs[].printer_id` and `active_jobs[].printer_id` — was being consumed by `ToastContext` for the progress overlay but never read by the picker. **Fix:** new `frontend/src/hooks/useDispatchedPrinterIds.ts` exposes `Set<number>` of printer_ids with a queued or active dispatch, populated from the same `background-dispatch` window event the ToastContext listens for. Module-level singleton + `useSyncExternalStore` so every `PrinterSelector` instance sees the same snapshot and a modal opened mid-batch picks up the latest state without a refetch. Reference-stable snapshot (size + membership check) keeps `useSyncExternalStore`'s Object.is comparison from re-rendering on every WS push that doesn't change the set. `PrinterSelector.tsx::isPrinterBusy` ORs the set into the existing connected/state check — printer disabled the instant dispatch is accepted, re-enabled when the dispatch finishes (or fails) and disappears from the next state payload. `getPrinterStateLabel` returns `"Dispatching..."` for the badge so operators see the in-flight state instead of a misleading "Idle" on a now-disabled card. Hardcoded English label is consistent with the existing labels in that function (`"Idle"`, `"Printing"`, `"Paused"` are all hardcoded, no i18n key). **What this is NOT:** a backend change (the reservation Mike asked about already exists at `background_dispatch.py:283-290`); a behaviour change for `add-to-queue` / `edit-queue-item` modes (those don't set `disableBusy=true`, so the busy-OR remains dormant for the card click handler — the badge label still flips, which is informative); a guarantee against the WS-not-yet-connected race (a fresh page load that opens the modal before the WS initial-state push lands still sees an empty set for ~1 frame; same race as today, much shorter window). **Tests:** 8 new cases in `useDispatchedPrinterIds.test.ts` pin the contract — empty initial set, picks up `dispatched_jobs` printer_ids, picks up `active_jobs` printer_ids, unions both lists, clears when subsequent event reports zero jobs, ignores non-numeric `printer_id` (defensive against payload drift), reference-stable snapshot when content doesn't change, shared state across hook instances. Existing 84 PrintModal + PrinterSelector cases still green — the new code path is dormant until a `background-dispatch` window event fires, which existing tests don't trigger. `npm run build` clean, ESLint clean.

### Security
- **Bumped two frontend dev-tooling dependencies with denial-of-service advisories (GHSA-3jxr-9vmj-r5cp, GHSA-52cp-r559-cp3m)** — `brace-expansion` and `js-yaml`, both pulled in transitively by `eslint` (via `minimatch` and `@eslint/eslintrc`), were flagged by `npm audit`. They are build/lint-time tooling only and are not part of the shipped app, so no running Bambuddy install was ever exposed. `npm audit fix` couldn't move eslint to the patched versions on its own, so they're pinned to the fixed releases through the existing `overrides` block in `frontend/package.json` (`brace-expansion ^5.0.7`, `js-yaml ^4.3.0`). `npm audit` now reports zero vulnerabilities and eslint still runs clean.
- **Raised the Docker image's pip floor to 26.1.2 (PYSEC-2026-196)** — The image already upgraded pip before installing requirements, but the floor was `pip>=26.1` while PYSEC-2026-196's fix is specifically 26.1.2 (the related PYSEC-2026-2875/2876 are fixed in 26.1). `--upgrade` grabbed the latest in practice, but the loose floor could resolve 26.1.0/26.1.1, which are still vulnerable; the pin now matches the advisory exactly. Build tooling only — pip is not part of the running app.
- **Bumped `linkify-it` and `dompurify` to their patched releases (GHSA-v245-v573-v5vm, GHSA-c2j3-45gr-mqc4)** — `npm audit` flagged both against the production dependency tree, and the Frontend Security CI job fails on any fixable high-severity finding there. **`linkify-it` 5.0.1 → 5.0.2** (high, CVSS 7.5) carries a quadratic-complexity denial-of-service in the `mailto:` validator's scan loop. It reaches Bambuddy only through `prosemirror-markdown` bundled inside `@tiptap/pm`; the rich-text editor's own autolinking uses `linkifyjs`, a different package that is not affected. Nothing under `frontend/src/` imports `prosemirror-markdown` or `markdown-it`, and neither string appears in the production bundle — the vulnerable code is tree-shaken out and never reaches a browser, so no running install was exposed. **`dompurify` 3.4.11 → 3.4.12** (low) lets `CUSTOM_ELEMENT_HANDLING` bypass an `afterSanitizeElements` hook for allowed custom elements. DOMPurify *is* shipped (MakerWorld summaries, project notes, the project-page modal), but Bambuddy never sets `CUSTOM_ELEMENT_HANDLING` — the default rejects custom elements outright — and registers no `afterSanitizeElements` hook, so the bypass has no precondition to stand on; the project-page modal additionally passes a strict `ALLOWED_TAGS`/`ALLOWED_ATTR` allowlist. Both patched versions already satisfy the ranges their parents declare, so this is a lockfile-only change: no `overrides` entry was needed and `frontend/package.json` is untouched. `npm audit` now reports zero vulnerabilities across the production tree, `npm run build` is clean, and all 2423 frontend tests pass.
- **Pinned `react-router` to its most-patched 7.x (7.18.1) and documented the one remaining, unreachable advisory (GHSA-qwww-vcr4-c8h2)** — Staying current on the 7.x line matters: 7.18.1 clears 14 advisories that older 7.x releases carry, several reachable in a browser SPA (open-redirect XSS in `<Link>`/`useNavigate`, route-matching DoS). The single advisory that still flags 7.18.1 — a CSRF bypass — applies only to React Router's **RSC mode**, which requires the server runtime (`@react-router/server`, not installed); Bambuddy is a Vite SPA using `BrowserRouter`, so the vulnerable path is unreachable. There is no non-major fix (the patch landed only in the 8.3.0 major, and `react-router-dom` has no 8.x — adopting it would mean migrating every import to `react-router` plus a React peer bump), so `react-router`/`react-router-dom` are pinned to 7.18.1 and the finding is carried as a documented, fail-closed exception in the CI audit gate: a *different* react-router advisory still fails CI, and the exemption is dropped automatically the moment a non-major fix ships. `npm audit fix --force` is deliberately avoided — its suggested "fix" is a downgrade to 7.11.0, which reintroduces those 14 advisories.

## [0.2.4.9] - 2026-07-07

### Added
- **Spool labels: scannable QR on 203 dpi thermal printers + monochrome mode (#1870)** — The 40 × 30 mm box label rendered its QR too densely for low-res thermal printers, so the modules bled together and wouldn't scan. The roomy layout now gives the QR a 12 mm minimum size and label QRs use `ERROR_CORRECT_L` (chunkier modules, same payload), so every template stays scannable. Also adds a **Monochrome (black & white printer)** option that drops the colour swatch and widens the text column, with the colour still carried by the hex-code line. Threaded through the renderer, route, API client, and modal, translated in all 11 locales.
- **Preheat & heat-soak before queued prints — per-filament chamber targets + airduct flap control (#1468)** — A new scheduler stage heats the bed (and the chamber, on capable printers) and holds temperature before each queued print starts, giving engineering filaments the heat-soak they need for adhesion and warp control (M191 is firmware-ignored, so this only works at the orchestration layer). Per-item Inherit/On/Off override, per-filament chamber targets (max across loaded slots), three hardware tiers (active heater / sensor-only / bed-only), and automatic airduct-flap switching (heating vs cooling). Default off — existing installs are unchanged.
- **API keys: `can_manage_maintenance` scope for HA-style automations (#1832 follow-up)** — Carves the MAINTENANCE create/update/delete permissions out of the API-key admin denylist so a Home Assistant automation can log "cleaned nozzle" or reset a counter via an API key without granting broader printer control. New per-key scope + Settings toggle + badge (11-locale i18n); existing keys migrate to off, so no upgrade silently widens scope.
- **Indonesian Rupiah (IDR) currency support (#1869)** — Adds IDR (Rp) to the supported currencies under Settings → Cost Tracking.

### Fixed
- **Filament Track Switch (FTS) on H2C fed the wrong filament for prints on the "other" nozzle (#2186)** — The backend dispatch mapping hard-filtered candidate trays to the requested extruder, so a print targeting one nozzle couldn't use the correct spool loaded in the other nozzle's AMS (which the FTS routes across) and fell through to a same-type wrong-colour spool. The mapping now reads `fila_switch.installed` and skips the per-nozzle filter when an FTS is present, so the right spool is matched by colour and the FTS routes it to the target nozzle. Single-nozzle printers are unaffected (no `nozzle_id`, no FTS).
- **Queued prints never dispatched to FINISH-state printers when "Require plate-clear confirmation" was disabled (#1865)** — The scheduler read the setting with a `True` default while the schema and the whole frontend default it `False`, so installs that never saved it enforced a plate-clear gate the UI showed as off — a finished printer never dispatched the next job and there was no UI control to clear `awaiting_plate_clear`. The scheduler now defaults the setting to `False`, matching the schema and the toggle.
- **Light theme: low-contrast washed-out text on status banners and coloured badges, app-wide (#1909)** — The app was built dark-first, so hundreds of hardcoded light-shade Tailwind text/icon utilities had no `dark:` variant and applied in light theme too — washed-out text on pale tints and white cards. Each now has a theme-aware pair (a readable darker shade in light theme, the original pinned to `dark:`), so dark theme is unchanged. ~100 files; the self-correcting `bambu-*` palette and the dark-only SpoolBuddy kiosk were left untouched.
- **Sponsor toast ignored its 14-day cooldown and re-fired on every fresh browser session (#2477)** — The cooldown anchor was only persisted when the user clicked the toast's "View supporters" CTA, so a toast that was seen but not clicked recorded no state and re-showed on every new session. The toast is now recorded as shown the moment it renders, so being displayed arms the cooldown; clicking the CTA stays optional.
- **Windows: fresh install failed to start — nothing listening on :8000 (#2474)** — On a clean Windows 10 box, greenlet failed to load (`vcruntime140_1.dll` missing — the embeddable Python ships only `vcruntime140.dll`), so `init_db()` crashed and uvicorn never bound the port while the NSSM service still showed running. The installer now stages `vcruntime140_1.dll` and `msvcp140.dll` next to `python.exe` at build time.
- **Virtual Printer "bind interface" dropdown was empty on macOS** — Interface enumeration only routed Windows through psutil; macOS fell into the Linux-only ioctl branch (`SIOCGIFADDR`/`SIOCGIFNETMASK`) and returned an empty list. All non-Linux platforms now use the cross-platform psutil path.
- **macOS native install failed with Homebrew / venv permission errors** — The installer mixed root-only steps with steps that must not run as root (brew refuses to run as root; a root-owned venv can't be managed by the launchd agent). The macOS path is now fully rootless — refuses `sudo`, defaults to `~/bambuddy`, and drops `sudo` from the download/venv/frontend/env steps. Linux (service user + systemd) is unchanged.
- **External camera "connection lost" when the snapshot URL served a non-JPEG image (#1902)** — HTTP-snapshot cameras serving PNG/WebP/BMP tore down the MJPEG stream because every part is labelled `image/jpeg`. Non-JPEG stills are now transcoded to JPEG via OpenCV; genuine JPEGs keep a byte-for-byte fast path, and undecodable responses fall back with a single warning instead of a per-frame log flood.
- **Per-user Notifications page unreachable from the sidebar (#1901)** — A sidebar-ordering refactor (#1673) dropped the `notifications` nav entry and its permission mapping while keeping the visibility gate that references it, so the page was reachable only by typing the URL. Both are restored, with comments so it isn't dropped again.
- **Virtual Printer FTP uploads silently truncated under uvloop (#1896)** — Native installs auto-selected uvloop, whose SSL layer can drop buffered data when the client closes without a TLS close_notify, so a corrupt `.gcode.3mf` could be acked `226`, archived, and pushed to the printer. Fixed on two layers: pin `--loop asyncio` on every native launch path, and validate that a received `.3mf` opens as a ZIP before replying `226` (truncated files answered `426`, never archived or forwarded).
- **API keys could not manage Projects (#1893)** — Every project mutation returned a generic `403` for any API key. A new `can_manage_projects` per-key scope (Settings toggle + badge, 11-locale i18n) covers create/update/delete; existing keys migrate to off. Same regression class as archives (#1888) and library (#1832).
- **Auto-drying stopped a manually started AMS dry after exactly 30 minutes (#1892)** — The already-drying branch applied an unreliable humidity-based early-stop (RH reads ~15–20 % within minutes of heated air even with wet filament), pinned to the 30-minute floor, which also truncated Bambuddy's own preset-duration dries. The humidity early-stop is removed — a running dry now runs to its configured duration (firmware stops it); scheduling stops are unchanged.
- **WebSocket auth failure caused an endless token-mint reconnect loop** — When the ws-token mint failed (typically a logged-in user whose group lacks `WEBSOCKET_CONNECT` → `403`), the hook opened a tokenless socket, got closed `4401`, and reconnected every 3 s — hammering `/auth/ws-token`. Mint failures are now classified: `401`/`403` stop the hook (degrade to REST polling), network/`5xx` still reconnect, and an unmount-race reconnect is guarded. Adds a group-editor hint explaining the permission rather than auto-granting it.
- **A transient load-time error could discard a valid stored login token (#1889)** — On mount, any failure validating the persisted "Remember Me" token cleared it, so a brief backend-not-ready hiccup during page load (e.g. right after a container restart) bounced the user to login with no way to recover. Validation now retries transient failures (up to 3 attempts) and only discards on a definitive `401`.
- **Smart plug cut power when a print restarted, ignoring per-plug cooldown (#1890)** — The queue "auto off after this job" trigger used a second inline implementation that hardcoded a 50 °C / 600 s cooldown and powered off on timeout regardless of print state, cutting power mid-print on a touchscreen reprint, and the tasks were uncancellable. Consolidated into the plug's configured, cancellable strategy, guarded by `is_print_active()` so no path powers off during a loaded print.
- **API keys could not delete or edit archives (#1888)** — `DELETE /archives/{id}` rejected every API key with a generic admin-denied `403`. A new `can_manage_archives` per-key scope moves the create/update/delete permissions off the denylist (PURGE stays admin-only); existing keys migrate to off. Settings toggle + badge, dialect-agnostic migration verified on SQLite and Postgres 17.
- **PVA-for-support intent lost when re-slicing a source 3MF (#1881)** — Three bugs on the PLA-model + PVA-support flow: a support-only slot was treated as "unused" and overwritten with slot 1's PLA, support filaments were stripped from unsliced archive cards, and the picked process preset shipped `enable_support=0`. Support slots are now read from project settings and unioned into the unused-slot set, all configured filaments surface, and the source 3MF's support settings are overlaid onto the process preset before `--load-settings`.
- **Bambu Studio couldn't see or reconnect to the VP after a Mac sleep/wake (#1872)** — A drain timeout on the report topic was caught as a non-`OSError`, so the push loop never evicted the zombie writer until the kernel's ~2 h keepalive. On drain timeout the writer is now closed and re-raised as `BrokenPipeError` (evicted on the same tick), and TCP keepalive is tightened (`KEEPIDLE`/`KEEPINTVL`/`KEEPCNT`) to ~2 min dead-peer detection.
- **Non-proxy VP camera passthrough was dead for A1 / P1 targets (#1868)** — The passthrough hardcoded port 322 (RTSPS), but A1 / A1 Mini / P1P / P1S use Bambu's chamber-image protocol on port 6000, so those targets got a 322 listener with no upstream (OrcaSlicer Liveview `[2:-10061]`). The port is now chosen from the target printer's model via the same source of truth as the camera route.
- **Editing a queue item assigned to "Any of model X" showed a blank printer selector** — The three model-mode props were gated behind `!isEditing`, which hid the mode toggle, model dropdown, and location filter (and the printer list was gated on printer-mode), leaving the selector empty. The gate is dropped so the target model/location can be changed without delete + re-queue.
- **Finish photo captured the wrong (swapped) plate on A1 / A1 Mini (#1867)** — A1 Mini firmware skips the stage-22 pre-capture, so the fallback fired at `FINISH` — after Bambu Studio ran the user's End G-code (e.g. a SwapMod plate swap). A `layer_num >= total_layer_num` edge trigger now fires the pre-capture the moment the last layer completes, on every variant, guarded by the existing one-shot.
- **Spoolman didn't split mid-print usage across an AMS backup switch (#1793)** — A same-material runout switch mid-print charged the whole slot to the origin spool and double-credited the backup via the remain-delta path. The segment math is now shared by both inventory backends so mid-print switches attribute identically, and the remain-delta fallback skips trays the split path already covered.
- **P1S / P1P showed a permanent "Door Closed" badge (#1866)** — P1S has an enclosure door but no hall sensor for it, and P1P has no enclosure at all, yet both rendered the green badge from a status bit that stays 0. The door-badge whitelist now covers only models that actually ship a door sensor (X1 family, X2D, P2S, H2 family).
- **Custom Bambu Cloud filament presets showed as "Generic" (#1815)** — The singular slicer-setting GET/DELETE calls omitted the `?version=` param Bambu Cloud requires and returned HTTP 400, so the resolver swallowed it and fell back to a generic `tray_info_idx` (BambuStudio's AMS panel then showed "Generic PLA"). The param is now sent on those calls, restoring custom cloud-preset lookup across the delete/update and preset-resolver surfaces.
- **Cancel during queue dispatch didn't cancel — the print started anyway (#1853)** — A check-then-act race in `_start_print` (plus a WAL writer lock held through the FTP upload) let the scheduler's stale in-memory write overwrite a user's cancel, and caused `database is locked` contention. Fixed with an atomic pending→printing CAS, an early re-check-and-bail, and committing before the FTP block so cancels and the sensor recorder stop queueing behind the scheduler.
- **"Inject auto-print G-code" checkbox couldn't be ticked on single prints (#1852)** — A `useEffect` reset the checkbox whenever quantity ≤ 1 in create mode, even though it renders whenever G-code snippets are configured — so a single-print user's click was immediately reverted. The quantity clause was dropped; the scheduler already reads `gcode_injection` per item regardless of batch size.
- **HMS wrong-plate "Ignore" didn't ignore, and the action buttons read as inert badges (#1869)** — Three compounding bugs on a wrong-plate HMS: `IGNORE_RESUME` sent a plain `resume` (so detection re-fired 1–2 s later) instead of BambuStudio's decimal-`err` ignore command; the button hover class was a non-literal template Tailwind's JIT couldn't compile; and ack-detection false-`502`'d on the transient re-pause. Fixed — the correct ignore command shape, static button styling with disabled/spinner states, and ack-detection via the last-message timestamp.
- **Slicer auto-pick could silently land an incompatible filament, and hid the real CLI error (#1851)** — The actual "not compatible with printer" diagnostic was discarded in favour of Bambu Studio's catch-all "input preset file is invalid" placeholder, and the picker used a soft mismatch penalty rather than a hard skip, so one bad pick propagated across every unused slot. The real `[error]` line is now surfaced, and incompatible presets are hard-skipped whenever a compatible one exists.
- **Uncataloged HMS faults that carry firmware actions were hidden (#1840)** — Fault visibility gated on catalog membership, so an actionable H2C fault missing from the bundled 853-entry catalog never rendered — no pip, count, panel, or action buttons. The gate now keeps `cataloged OR has-actions` faults (still filtering junk echoes), with an "unknown HMS code" fallback label in all 11 locales.
- **First-layer notification photo showed pre-print calibration, not the actual print (#1837)** — Bambu printers tick `layer_num` during calibration (homing, bed levelling, purge), so a bare `2 ≤ layer_num ≤ 5` gate fired the notification minutes early with a photo of an empty plate. It now waits for `gcode_state == RUNNING` (and the printing sub-stage) before firing, and widens the trigger window so a deferred edge still lands.
- **Administrators didn't gain new permissions on upgrade + Pipelines runs-dashboard polish** — Upgraded Administrator groups only received permissions listed in one-off backfill blocks, so any newly-added permission (most recently `printer_sensor_history:read`, which 403'd the Sensor History charts) silently stayed missing. `seed_default_groups()` now syncs Administrators to every current permission on startup (additive only; custom permissions preserved). Also replaces the Pipeline/Status/Target native `<select>` filters on the runs dashboard with themed dropdowns and fixes a `react-hooks/exhaustive-deps` warning.

## [0.2.4.8] - 2026-06-28

### Added
- **Lower sponsor-prompt thresholds so the toast fires for typical new installs** (`257b9e2c`)
- **SSO autologin + disable local username/password login (#1589, requested by @einstux)** (`549d3216`)
- **"Auto-add unknown RFID spools" toggle + global confirmation modal (#1764)** (`9f9c1775`)
- **Backup-aware filament deficit check, colour-strict (#1762)** (`29a5abd9`)
- **Drag-reorder for grouped queue items; collapsed batches no longer block adjacent rows** (`7b06ebd7`)
- **Per-filament humidity threshold for auto-drying + alarms (#1605, requested by @thenewguy)** (`7e5eff14`)
- **Per-printer Maintenance Mode toggle (#1476, requested by @IndividualGhost1905 / Ferdi SEVER)** (`ee270922`)
- **In-app sponsor-toast at earned milestones** (`e761e092`)
- **Prominent sponsor banner on Settings → General** (`5c16ef3e`)
- **Heater history (nozzle / bed / chamber) tracked + per-tile chart-icon overlay opens history modal** (`d1d16659`)
- **AMS Filament Backup status badge + toggle on the printer card; "Prefer lowest" actually picks the lowest spool (#1766, reported by @biduleman)** (`99c6949b`)
- **Updated printer card UI for structure and readability (#1661)** (`6fa74be4`)

### Changed
- **Printer card AMS row: external tray height matches regular AMS slots** (`00e4aed7`)

### Fixed
- **Assign-spool picker note now visible on mobile (#793 follow-up, reporter @EmcetPL)** (`b2b04fc4`)
- **API keys with Manage Library permission can rename / delete / move library files (#1832, reporter @MorganMLGman)** (`4c795636`)
- **Forecasting groups spools by colour + Forecast UI rework (#1814, by @Keybored02)** (`3cbdba0c`)
- **False-positive "Print Stopped" notification on reprint after MQTT reconnect (#1807, reported by @volodymyr-doba)** (`5e008744`)
- **Unknown-tag modal no longer pops for slots with no RFID** (`8b72b305`)
- **SpoolBuddy "Assign to AMS" preserves the user's slicer preset instead of pushing Generic (#1815, reported by @Bgabor997)** (`cd5a02c0`)
- **H2S active-tray highlight no longer stuck on AMS slot 1 during external-spool prints (#1822, reported by @ojimpo)** (`2bd2bce3`)
- **`require_previous_success` no longer permanently blocks a printer's queue after a failure (#1818, reported by @jmassardo)** (`ba7af59b`)
- **Archives "Step 4" docs link no longer 404s (#1812, reported by @Spanholz)** (`c52aba66`)
- **H2C nozzle pick from Bambu Studio preserved on dual-nozzle rack variant + VP slicer-field intake (#1780, reported by @mkoreen)** — Race window bumped to 5s with retroactive stamp; VP intake key mismatch corrected; rack-swap nozzle pick forwarded to dispatch. (`71b0575f`, `30c2e263`, `b6916055`)
- **Connection diagnostic no longer reports false camera-port warning on A1 / A1 Mini / P1 (#1799 closing #1798, by @lesbass / Stefano Maffeis)** (`8e99b0c8`)
- **Print-complete notification no longer drops the finish photo when the FINISH-state fallback fires (#1790, reported by @needo37)** (`a9bf6f1f`)
- **Chamber-fan badge hidden on open-frame Bambu printers** (`568f220a`)
- **In-app "Install Update" on Windows installer switched to release-asset update flow** (`b7ff72d8`)
- **Mid-print AMS Backup spool-switch correctly splits weight instead of crediting all to the second spool (#1771, reported by @biduleman)** (`a70c2a2d`)
- **AMS history modal respects theme background variant in stats modal** (`55510871`)
- **Completion notification scoped to printed plate on multi-plate 3MFs (#1785)** (`964015de`)
- **Docker installer escalates on EACCES instead of failing on `/opt/bambuddy` (#1774, reported by @jmoore-skild)** (`03d09238`)
- **Archive thumbnails rendered server-side when the sidecar slice skips them (#1759, reported by @VID-PRO)** (`d2232e02`)
- **Post-#1661 printer-card cleanup — test fixtures + hover-card fly-in removal** (`0128869d`)
- **Local Presets page: deleted row optimistically removed instead of staying visible until refetch returned** (`0eed9865`)
- **SpoolBuddy inventory search matches spool ID, slicer filament name, and storage location (#1738, reported by @shaddowlink)** (`355d08a8`)
- **Sidebar entries for Files / Archives / Queue no longer hidden from non-admin users with granular `*_read` access (#1755, reported by @knifesk)** (`7f150886`)
- **Push notification for "Printer offline" actually fires (#1752, reported by @saint-hh)** (`2cbbd1ee`)
- **Auth preserves the original URL across login + OIDC round-trip (#1750)** (`ed1683fe`)
- **Archives backfill NULL `created_at` + tolerate NULL in response (#1732)** (`8faaeb96`)

### Security
- **Floor pins for pydantic-settings ≥2.14.2 + msgpack ≥1.2.1** (`458bfa15`)
- **Backend dependency security floor bumps + 422 constant rename** (`580f42c1`)
- **dompurify 3.4.10 → 3.4.11 (GHSA-cmwh-pvxp-8882, moderate)** (`11227f65`)
- **Vite 7 → 8 + plugin-react 5.2 (major bump)** (`f7620406`)
- **Frontend dependency bumps** (`000af683`)
- **Printer secrets restricted to update-authority callers** (`8283b175`)

## [0.2.4.7] - 2026-06-14

### Added
- **Bambu Lab A2L support (#1684)** — Internal model code `N9`, serial prefix `26A19` (5 chars, same shape as H2C's late `31B8B`). Capabilities resolved from BambuStudio's `resources/profiles/BBL/machine/Bambu Lab A2L.json` cross-checked against Bambu's official A2L specs page: linear rail, single FDM extruder + integrated cutter/plotter head (the BambuStudio `use_double_extruder_default_texture: true` flag covers the dual TOOL HEADS, not dual filament extrusion — A2L must NOT route AMS to the deputy slot or firmware rejects with 07FF_8012). Specs page also confirms NO Ethernet (Wi-Fi 2.4 GHz 802.11 b/g/n only), `Low-Rate-Kamera` on the chamber-image protocol (port 6000, NOT RTSP:322), no heated chamber. **Registry updates**: `PRINTER_MODEL_MAP` + `PRINTER_MODEL_ID_MAP` + `LINEAR_RAIL_MODELS` in `utils/printer_models.py`; `MODEL_TO_API_KEY` + `API_KEY_TO_DEV_MODEL` + `API_KEY_TO_WIKI_PATH` in `firmware_check.py` (wiki path follows the established `/en/a2l/manual/a2l-firmware-release-history` pattern; the existing 404 handling in `_fetch_all_versions_from_wiki` makes this safe to ship before Bambu publishes the page); `VIRTUAL_PRINTER_MODELS` + `MODEL_SERIAL_PREFIXES` in `virtual_printer/manager.py` (prefix `26A19A` with the same revision-letter padding as X2D's `20P90A`); `MODEL_PRODUCT_NAMES` in `virtual_printer/mqtt_server.py`; `mapModelCode` + Add-Printer / Edit-Printer model dropdowns in `PrintersPage.tsx` (new "A2 Series" optgroup); `mapModelCode` in `SpoolBuddyAmsPage.tsx`. **Camera and dual-nozzle code paths need no edits**: `supports_rtsp()` correctly falls through to chamber-image for A2L because `N9` is neither in the internal-code RTSP set nor does the display name match the X1/X2/H2/P2 prefix tuple; `is_dual_nozzle_model()` correctly returns False because A2L is not in `DUAL_NOZZLE_MODELS`. The cutter/plotter capability surfaces in MQTT push fields Bambuddy doesn't yet model; ignored for v1, will surface as a follow-up only if a real-world A2L bundle reveals a confusing UI state. **Tests**: 12 new cases in `test_printer_models.py::TestA2LModel` pinning every dimension — rod type, model-id round-trip, both ethernet directions, both camera-port directions, the explicit non-dual-nozzle guard (regression guard for the BambuStudio profile flag misread), set membership in `LINEAR_RAIL_MODELS` and exclusion from `CARBON_ROD_MODELS` / `STEEL_ROD_MODELS`.

- **One-shot `device.*` identification probe in MQTT push parser (#1684 enabler)** — Adding support for a new Bambu printer model needs the internal model code the firmware sends in MQTT `device.dev_model_name` (e.g. A1 is `N2S`, H2C is `O1C`, X2D is `N6`). The field arrives on every push but Bambuddy never logged it, so even a debug-enabled support bundle from a new-model user (A2L on #1684 was the case that surfaced this) gave us no way to identify the model — `get_version` was also missing because the printer disconnected right after the request topic subscription, which is a separate firmware quirk. **Fix:** at the top of the existing `device.*` parsing block in `bambu_mqtt.py`, emit one INFO log per client session dumping `dev_model_name` / `dev_product_name` / `dev_id` / `project_name` if any are present; otherwise fall back to `device.keys()` so a future Bambu rename (e.g. `model_name` without the `dev_` prefix) still surfaces. INFO level so the line lands in every support bundle, not just debug-enabled ones; one-shot via a `_device_id_logged` flag matching the existing `_nozzle_fields_logged` pattern at line 2095 — no spam at every push_status. 3 unit tests in `TestDeviceIdentificationProbe` pin the one-shot behaviour, the known-id-field path, and the keys-fallback path. Full `test_bambu_mqtt.py` suite 281 / 281 green; ruff clean. Once this ships, a new-model issue self-resolves from the first bundle — no second round of "please enable debug and reupload" required.

- **Re-print / Schedule modal: cross-extruder AMS slot picks on dual-nozzle (#1722, reported by @privatsturm)** — On a dual-nozzle setup (e.g. H2D with AMS A+C wired to the left extruder and AMS B wired to the right), the per-filament slot dropdown in the Re-print and Schedule modals used to hide every slot whose extruder didn't match the filament's slicer-assigned nozzle. A filament the slicer had assigned to the left extruder would only let the user pick from A or C; a right-assigned filament could only pick from B. Users who'd intentionally loaded the required filament into the "other" AMS — for example, AMS B (right side) carrying a colour the slicer had planned to print on the left — couldn't select it, even though the printer can physically run that AMS through its wired extruder. Three slice-output diffs (BambuStudio Desktop, OrcaSlicer Desktop, Bambuddy sidecar) all produced identical filament_map values for the same source 3MF, so the slicer wasn't the source of the asymmetry — Bambuddy's UI filter was. **Behaviour:** every loaded slot is now offered for every filament row in the Re-print and Schedule modals' specific-printer flow, regardless of which extruder it's wired to. The L/R badge on the filament row stays as a visual hint to what the slicer planned; the dropdown now trusts the user to pick based on their physical setup. Single-nozzle printers and FTS-equipped setups are unchanged — both short-circuited the filter already and continue to. Printer firmware accepts or rejects the resulting `ams_mapping` at start-print, so a physically-impossible pick fails loudly rather than silently. **Implementation:** `FilamentMapping.tsx:248-254` carried a guard `f.extruderId === item.nozzle_id` on the slot dropdown's `loadedFilaments` filter; the guard is now removed. The single-nozzle and FTS short-circuits stay. **Tests:** `'still applies the per-nozzle filter when FTS is null'` flipped to `'offers cross-extruder slots in the dropdown without FTS (#1722)'` — same scenario (no FTS, AMS 0 on right, filament asking for left), but now asserts both slots ARE listed. The FTS-installed case (#1162) and the rest of the FilamentMapping suite stay green. Backend untouched; no schema, no i18n. 5/5 FilamentMapping vitests green; 1043/1043 full component sweep green; frontend build clean.

- **Support bundle now includes redacted cached push_status per connected printer** — The existing support bundle (`GET /support/bundle`) shipped `support-info.json` + `bambuddy.log` — useful for triage, but missing the one thing that consistently blocks per-model work: the raw shape of the printer's MQTT push_status payload. Bambu firmware ships per-model config in a different shape for every family — AMS Backup detection was deferred in `85fbd7fc` because the H2D's bit-26 of `print.cfg` doesn't translate to the X1C / P1S / P2S layout and we had no ground-truth samples to map them; the same gap surfaces every time a `vt_tray` / `vir_slot` / `mapping` shape varies across firmware (the P2S `tray_now` fix, the H2D `vir_slot` parsing, the round-5 `vt_tray` overlay fix from #1622 last week all needed wire samples to land). **What's new:** the bundle now contains a `push-status/printer-{i}.json` file per connected printer, indexed against `support-info.json["printers"]`. Each file carries `{model, firmware_version, captured_at, raw_data}` where `raw_data` is the live cached push_status from `BambuMQTTClient.state.raw_data`. Disconnected printers (no MQTT state, or `raw_data` empty) are skipped — there's nothing to capture and an empty file just adds noise. **Redaction (two-pass):** a structural pass via the new `_redact_raw_push_status` helper drops user-private top-level keys anywhere in the tree (`subtask_name`, `gcode_file`, `gcode_file_prepare_percent`, `subtask_id`, `task_id`, `project_id`, `design_id`, `profile_id`, `model_id`, `gcode_state`) — Bambu's per-print filename/cloud-ID surface — and rewrites every `net.info[*].ip` entry to `"0.0.0.0"`, mirroring the LAN-topology leak fixed for the virtual-printer bridge in #1429. **What's deliberately preserved:** `print.cfg`, `print.option`, `ams.*`, `vt_tray`, `vir_slot`, `mapping`, `ams_extruder_map`, hardware fields (`nozzle_diameter`, temperatures, layer counters). These are the fields per-model work depends on. The structural pass then runs through `sanitize_log_content` with the same DB-derived `sensitive_strings` map the log path uses (printer names, serials, IPs, access codes, usernames, Bambu Cloud email) — belt-and-suspenders against any user-named string that leaked into a tray UUID or a sub-brand field. The redactor returns a NEW dict and never mutates the live `state.raw_data` (the dispatcher reads it on every tick; mutation would race the next push). **Why always-on instead of opt-in:** the bundle endpoint is already gated on "debug logging must be enabled" — generating the bundle is an explicit user act, the file downloads to the user's machine before they choose to send it, and forcing a second toggle adds friction without changing the threat model. Once a handful of bundles arrive from new-model users we'll have what we need to unblock AMS Backup awareness in the print-queue deficit check, plus future per-model shape variance. **Tests:** 5 new unit cases in `test_support_helpers.py::TestRedactRawPushStatus` pin the contract — drops the 9 user-private keys, rewrites `net.info[*].ip` while preserving `mask` siblings + sibling `net` keys, preserves `print.cfg` / `ams` / `vt_tray` / `vir_slot` / `mapping` / `ams_extruder_map`, does not mutate input, handles non-dict input gracefully (returns `{}` for None / list / str). Full support test surface 79/79 green (`test_support_helpers.py` + `test_support_api.py`); full backend suite 5937/5937 green with `-n 30`; ruff clean across the backend; frontend untouched but rebuild + i18n parity confirmed clean per `feedback_run_all_ci_checks`. No migration, no new i18n keys, no schema changes, no frontend changes.

- **Windows installer build pipeline scaffolded** — Lays down the infrastructure for producing a self-contained Bambuddy Windows installer `.exe` that doesn't require Python, Node, or any other runtime on the target machine. The installer ships an embedded Python 3.13 distribution (matching the Dockerfile's `python:3.13-slim-trixie`), the pre-built React bundle, NSSM (service supervisor), and ffmpeg — everything Bambuddy needs to run end-to-end on a stock Windows 10/11 box. **Architecture:** install target `C:\Program Files\Bambuddy\`, data target `C:\ProgramData\Bambuddy\data\` (preserved on uninstall so reinstalls keep the database + archives), service registered via NSSM running as `LocalSystem` with autostart on boot (LocalSystem is required because the Virtual Printer feature needs to bind 322 / 990 / 8883, all privileged ports on Windows). Browser is the UI — Start Menu shortcut opens `http://localhost:8000`, no Tauri / Electron launcher in v1, which matches how every other Bambuddy platform already works. **Why this shape over a PowerShell `install.ps1`:** the script approach was tried first and abandoned. Each failure across the Windows host fleet is environmental drift (Python version mismatches, execution-policy variants, antivirus heuristics, missing MSVC runtimes, OneDrive-redirected `%APPDATA%`, ARM64 vs x64, PowerShell 5.1 vs 7.x semantics) — a script can't insulate against host state, and every fix you add for one machine breaks two others. The self-contained-bundle approach takes that whole class of failure off the table. **Files:** `installers/windows/build.py` stages everything under `installers/windows/build/staging/`, `installers/windows/bambuddy.iss` is the Inno Setup 6 script, `installers/windows/service/install-service.bat` + `uninstall-service.bat` wrap NSSM. `build.py` hard-fails on non-Windows hosts; cross-build under Wine is an unsupported escape hatch behind `--allow-non-windows`. **CI:** `.github/workflows/windows-installer.yml` runs on tag push (`v*`) and manual dispatch, uses `windows-latest`, downloads Inno Setup via Chocolatey, runs `build.py` + ISCC, uploads the `.exe` as both a workflow artifact and a release asset. **Scope clarification:** this commit lands the build infrastructure, not a verified-working installer. The first real Windows-box smoke test happens after merge by triggering the workflow manually and installing the artifact on a target box; known unknowns are pip-installing `opencv-python-headless` / `curl_cffi` / `asyncpg` / `cryptography` / `bcrypt` against embedded Python (the `_pth` file edits in `build.py` cover the common gotchas but real-runtime imports are where surprises surface), ffmpeg path lookup from a LocalSystem service, and NSSM `AppEnvironmentExtra` line-continuation in cmd.exe. **Signing:** v1 ships unsigned — Windows SmartScreen will warn "Windows protected your PC" on first run, click-through works. SignPath OSS application submitted 2026-06-10 to wire free EV signing into CI once approved (typical 1–3 week approval window). **What's explicitly NOT in v1:** Spoolman bundling (Bambuddy's internal-inventory mode is the v1 default on Windows; users who want Spoolman install it separately), in-place upgrade (uninstall + install cycle works, but in-place upgrade-on-top needs end-to-end verification before we promise it), port-conflict pre-check (deferred to v1.1 — port collisions surface at first service start and the user reads the NSSM stderr log under `C:\ProgramData\Bambuddy\logs\service-stderr.log`). See `installers/windows/README.md` for the full build pipeline.

- **VP wire-payload dump escape hatch for shape-of-payload triage (#1622 investigation)** — When a virtual printer in non-proxy mode is misbehaving for the slicer-facing surface (AMS slot fields rendering empty, filament dropdown unselectable, K-profile not visible), the existing logs prove the bridge is bound and pushing at 1Hz but don't show what's actually in the wire payload. Without that, "cache is missing fields" is indistinguishable from "the slicer-facing copy is stripping them." Set `BAMBUDDY_VP_DUMP_WIRE=1` and Bambuddy writes the bridge's cached push_status (`<log_dir>/vp_wire/<vp_name>_in.json`) and the periodic 1Hz copy that gets sent to the slicer (`<log_dir>/vp_wire/<vp_name>_out.json`) to disk, overwritten on each tick. Diffing the two answers the bisect question; diffing a misbehaving VP's `_out.json` against a known-good VP's `_out.json` (e.g. P1S vs H2D in the #1622 case) answers the model-shape question. Off by default, no overhead when disabled (single env-var read per tick); env var re-read on every call so toggling without restart works; failures swallowed at debug so a broken dump can never break the 1Hz loop. Implementation lives in `backend/app/services/virtual_printer/_debug.py` with call sites in `mqtt_server.py::_send_status_report` (cached branch only — synthetic fallback is uninteresting for this triage) and `mqtt_bridge.py::_on_printer_raw` (immediately after the merge that produces `_latest_print_state`). 21 unit tests in `test_vp_wire_dump.py` pin: disabled-by-default, atomic tmp+rename writes (no half-written .json visible to a reader), sanitized vp_name (path-separator stripped, empty name falls back to `vp`, .. inside a single filename component is harmless because slashes are collapsed before path construction), per-call env check, dict + bytes + str payload acceptance, swallow-on-OSError. Not gated on debug-logging because the bridge's verbose path is already noisy; this dump is small (one file per direction per VP) and only present when the operator opts in. Diagnostic-only — does not change the bridge data path.

- **VP slicer↔printer command-flow trace (#1622 round 2)** — The snapshot dump above answers "is the cached push shape correct?", but the round-1 captures from #1622 ruled that out: P1S AMS payload reaches the slicer byte-identical to what the printer sent, sticky-key preservation works, the visible slot data is intact. The remaining symptom (picking a generic filament in archive mode "unloads" the slot) lives on the command path, not in the periodic push — and the snapshot dump doesn't capture command traffic. Same env flag (`BAMBUDDY_VP_DUMP_WIRE=1`) now also appends every slicer-originated publish on `device/<vp_serial>/request` AND every printer-originated response the bridge fans out to the slicer (extrusion_cali_get, ams_filament_setting acks, xcam, system, etc.) to `<log_dir>/vp_wire/<vp_name>_cmd.jsonl`, one JSON line per event with UTC iso timestamp, direction (`slicer_to_bridge` / `printer_to_slicer`), MQTT topic, a `<channel>.<command>` grep handle, and the parsed payload. Excludes the cached-as-base 1Hz push (already covered by the snapshot dump) and `pushall`/`get_version` (handled locally, never forwarded). Printer-side captures happen AFTER serial rewrite so the dump matches what the slicer actually saw on the wire. New `append_event` helper in `_debug.py` mirrors the same swallow-on-OSError + sanitized-vp_name + per-call env-check posture as `dump_wire`; bytes payloads are utf-8 decoded then json-parsed with the same `\x00`-tolerance fix from #927 so OrcaSlicer's C-string-null publishes parse cleanly; un-parseable bytes fall back to `{"raw": "..."}` so every line stays valid JSON. Eight additional unit tests in `test_vp_wire_dump.py` pin: disabled-by-default, bytes parsing, trailing-null tolerance, unparseable-fallback, vp_name sanitization, iso timestamp shape, append-multiple-lines, swallow-on-OSError. Diagnostic-only — does not change the publish or fan-out data path.

- **VP bridge-synthesised reply trace (#1622 round 3)** — The round-2 cmd.jsonl from shaddowlink's P1S vs H2D capture proves the actual failure mode: on P1S in archive mode the slicer issues `extrusion_cali_set` (push K/n directly) and the printer responds `fail`, on H2D and on the P1S second round the slicer takes the `extrusion_cali_sel` flow (select by `filament_id` / `cali_idx`) and the printer responds `success`. Both flows traverse the bridge cleanly — `ams_filament_setting` round-trips with `result=success` and the cached push_status carries `tray_info_idx=GFA11`, `tray_type=PLA-AERO`, K/n, and `cali_idx=-1` intact. So the bridge is innocent on every layer the dump can see, and the open question becomes: what makes the slicer pick `_set` vs `_sel`? Likely candidates are the `info.get_version` answer Bambuddy synthesises (slicer fingerprints on `sw_ver` / `hw_ver` / `module` to decide its command flow) or the first cached `pushall` response the slicer reads to bootstrap its UI. Round 2 captured neither — the JSONL had `slicer_to_bridge` and `printer_to_slicer` directions but no `bridge_to_slicer` direction for the bridge's own synthesised replies. Same env flag (`BAMBUDDY_VP_DUMP_WIRE=1`) now also appends every bridge-synthesised reply (info.get_version answer, project_file ack, on-demand pushall response) to `<log_dir>/vp_wire/<vp_name>_cmd.jsonl` under direction `bridge_to_slicer`. Capture lives in `mqtt_server.py::_publish_to_report` — the single chokepoint every synthesised reply already passes through — gated on a new `log_event: bool = True` parameter; the 1Hz periodic-push path threads `log_event=False` so the JSONL isn't flooded with ~60 lines/min per VP (snapshot dump already covers cache shape). The on-demand pushall response from `_send_status_report` IS logged because that's the bootstrap-fingerprint reply the slicer reads on first connect. Two additional unit tests in `test_vp_mqtt_bridge.py::TestWireFormat` pin the event-on-default and skip-when-`log_event=False` posture; `test_vp_wire_dump.py` already covers the underlying `append_event` shape and the new direction is documented in `_debug.py`'s docstring. Diagnostic-only — does not change the publish data path; the new param defaults preserve every existing call site's behaviour.

- **Batch grouping for queued items** — multi-plate prints from one source 3MF now auto-group into a single collapsible row with aggregate stats, and a new "Group as batch…" action turns any 2+ selected items into a manual batch. Per-batch collapse state persists across reloads. Manual batches can be disbanded via the Ungroup action on the batch parent.

- **History batch grouping** — siblings of the same batch collapse into one history row with status-rollup chips (e.g. 3 ✓ / 1 ✗) and the latest activity timestamp.

- **History thumbnail hover preview** — hover any small history thumbnail and a 192×192 preview pops out next to it.

### Changed

- **Queue page restructured around three tabs** — Queue, History, and Timeline now live as separate tabs at the top. History no longer competes with the active queue for screen space.

- **Active queue layout toggle** — pick between a flat list (current default) and a per-printer view where each printer becomes a section card with aggregate item count, total time, and total filament weight in its header.

- **Multi-drag reorder** — selecting N items and dragging any one of them moves the whole selection as a contiguous block; the drag ghost shows a "+N" badge.

- **History rows redesigned** — each row now carries a filament color swatch + weight + type, the user who started the print, and the failure reason inline on failed/skipped rows. Rows lay out in a responsive 1/2/3 column grid so a long history uses available horizontal space.

- **Timeline tab rebuilt as a Gantt swimlane** — one horizontal row per printer (plus per target_model and unassigned), jobs rendered as bars positioned by start time and sized by duration. Live NOW marker, 24-hour rolling window with 12-hour step controls. Only committed schedules are shown — staged items, waiting items, and ASAP jobs on idle printers are hidden so the timeline reads as a real forecast.

### Fixed
- **Virtual Printer queue mode: multi-plate "Send All" now enqueues one queue item per plate** — BambuStudio / OrcaSlicer's "Send All" packs every plate of the project into a SINGLE 3MF and uploads it with one FTP STOR — `slice_info.config` inside the file carries N `<plate>` blocks (one per plate), each with its own `<metadata key="index" value="N"/>` and its own `Metadata/plate_N.gcode` payload. Previously the VP queue path only ever extracted the FIRST plate's index via `_extract_plate_id` and created exactly ONE PrintQueueItem with that single `plate_id`; plates 2..N silently dropped on the floor. Indistinguishable from the user's perspective from "Send" of a single plate — except they expected 3 items in the queue and got 1, with no log line to explain why. **Confirmed against the wire** on the live H2D-1 Proxy VP: `Cube.gcode.3mf` carrying three `<plate>` blocks (indices 1, 2, 3) + three per-plate gcode payloads in the same zip, identical filename whether "Send" or "Send All" was clicked — the only signal of intent is the count of `<plate>` blocks inside the file. **Fix:** replaced `_extract_plate_id` (returning `int | None`) with `_extract_plate_ids` (returning `list[int]`). The list contains every `<plate>` block's `index` metadata, in order; falls back to `[1]` for files missing `slice_info.config` or with no parseable plates so the single-plate path is preserved. `_add_to_print_queue` now loops over the list — each iteration calls `extract_filament_requirements(file_path, plate_id)` per-plate (the plate-aware path was already there from the #1697 work) and creates a PrintQueueItem with that plate's filament types / overrides, plate-specific position = `MAX(position) + iteration`. Single-plate "Send" hits the loop once → exactly today's behaviour (one queue item, plate_id from the slicer, same archive). Multi-plate "Send All" of a 3-plate file → 3 queue items, plate_id 1/2/3, consecutive positions, all pointing at the same backing archive (one upload = one archive). **What stays the same:** the single archive row per upload (the archive backs the queue items via `archive_id`); the `auto_dispatch=False` / `manual_start=true` posture inherited from the VP config (so multi-plate items still require manual start); the `queue_force_color_match` per-VP toggle (now applies per-plate). **What this also fixed downstream:** the `required_filament_types` / `filament_overrides` JSON on each queue item now reflects THAT plate's filaments, not the file's first plate — so the scheduler's per-printer "Any X" matching dispatches each plate onto a printer with the right colours loaded for THAT plate, not for plate 1's filament set. **Tests:** 1 new regression case in `test_virtual_printer.py::TestVirtualPrinterInstance::test_add_to_print_queue_multi_plate_send_all_enqueues_one_per_plate` — builds a 3-plate 3MF (writes the per-plate `<plate>` blocks into `slice_info.config` and the per-plate gcode payloads), runs `_add_to_print_queue`, asserts 3 PrintQueueItems with `plate_id == [1, 2, 3]`, `position == [1, 2, 3]`, shared `archive_id`, all `manual_start=True`. 126 existing single-plate VP tests stay green (loop runs once when input has one plate). Full backend suite 5962/5962 green; ruff clean; frontend untouched. **Live-verified** on the H2D-1 Proxy VP — a Send All of the 3-plate Cube project now produces 3 queue items + 1 archive instead of 1 queue item + 1 archive.

- **Archive delete now removes related queue items instead of leaving "cancelled" rows behind** — Previously the soft-delete path (the default — what the trash-can button does) called `_cancel_pending_queue_items`, which only flipped queue rows with `status='pending'` to `status='cancelled'` while leaving every other status alone AND leaving every row in the DB. The Send All multi-plate work above made this much more visible: deleting an archive backed by N queue items now had to clean up N rows, and what users saw instead was N "cancelled" rows lingering in the queue history. **Fix (backend):** replaced `_cancel_pending_queue_items` with `_delete_related_queue_items(db, archive_id) -> int` that DELETEs every queue row where `archive_id = X` regardless of status. Behavior now matches what the hard-delete path already did via the `ON DELETE CASCADE` FK on `print_queue.archive_id` — both paths produce the same end state. Print history lives in `PrintLogEntry` (FK `ON DELETE SET NULL`) and is untouched, so stats / Quick Stats / accuracy bands are preserved across both delete paths. **New guard:** the route at `archives.py::delete_archive` now 409s when any related queue item is currently in `status='printing'` — both soft and hard delete are gated by the same precondition, because deleting the archive while a print is live would strip the dispatcher's metadata trail (filament / plate / ams_mapping) out from under the running print. The 409 surfaces a clear "Stop the print first, then retry" message. **Pre-flight count for the UI:** new endpoint `GET /archives/{id}/delete-impact` returns `{related_queue_items: N, currently_printing: M}` — cheap, single endpoint, not folded into the archive list response so the much larger list endpoint isn't forced to run the same query per row. Frontend ArchivesPage delete-confirm modal queries this when the modal opens (`useQuery({queryKey: ['archive', id, 'delete-impact'], enabled: showDeleteConfirm})`) and renders: an amber warning "**N queue item(s) linked to this archive will also be removed.**" when total > 0 AND printing = 0, OR a red warning "**Cannot delete — M queue item(s) are currently printing. Stop the print first, then retry.**" when printing > 0 (with the confirm button disabled in that case so the user can't bonk the 409 on submit). **ConfirmModal extension:** added optional `confirmDisabled?: boolean` prop. Existing `isLoading` was the only disable knob; this adds an external-precondition path that disables the confirm without the loading spinner. **Tests:** rewrote `test_print_queue_api.py::test_soft_delete_archive_cancels_pending_queue_items` → `test_soft_delete_archive_deletes_all_related_queue_items` to pin the new contract (both pending AND completed rows are gone post-soft-delete). 2 new integration cases in `test_archives_api.py`: `test_delete_archive_blocked_when_related_queue_item_printing` (both soft and hard paths return 409 with "printing" in detail message) + `test_archive_delete_impact_reports_counts` (3 mixed-status related rows + 1 unrelated row → endpoint reports `related_queue_items=3, currently_printing=1`, unrelated row doesn't bleed in). **i18n:** 2 new keys (`archives.modal.deleteQueueItemsWarning`, `archives.modal.deleteBlockedByPrinting`) translated across all 11 locales per `feedback_translate_dont_fallback` — no English fallbacks. **Verification:** full backend suite 5964/5964 green with `-n 30`; ruff clean; ESLint clean; `npm run build` clean; vitest 2118/2118 green; i18n parity 5109 × 11 locales green. No DB migration — the CASCADE FK was already in place; only the helper's semantics changed.

- **Print Log table: multi-color filament rows render one swatch per color instead of a single barely-visible gray dot (#1731 part 1, reported by @IndividualGhost1905)** — The per-archive Print Log table cell at `frontend/src/pages/ArchivesPage.tsx:3882` rendered the `filament_color` column as ONE swatch with `style={{ backgroundColor: entry.filament_color.startsWith('#') ? entry.filament_color : undefined }}`. For multi-color prints, the backend writes `filament_color` as a comma-joined string (e.g. `"#FFFFFF,#000000,#FF0000"` — three filaments used in the print), which trivially passes the `.startsWith('#')` check but is not a valid CSS color. The browser silently dropped the `backgroundColor` declaration, leaving the swatch as only its black/20% border on the app's dark theme — visually a tiny grey dot, near-invisible against the row background, which the reporter's screenshots showed as "PLA" text in the cell with no apparent swatch at all. The DB column was correct (the reporter confirmed both colors were recorded for the old example); the render dropped them. The Archive Card view at `:1072-1083` and `:2114-2125` already split on comma and rendered one swatch per color — only the Print Log table cell had been missed when multi-color support was added across the rest of the page. **Fix:** the Print Log table cell now mirrors the card-view pattern — wraps the swatches in a `flex` container, splits `entry.filament_color` on `,`, trims each value, and renders one `w-3 h-3 rounded-full` per color with `backgroundColor: trimmed.startsWith('#') ? trimmed : undefined` and a `title={trimmed}` for hover-tooltip parity. Single-color prints render exactly one swatch (the trivial case — no behaviour change). Empty / non-hex slot values gracefully fall through to no `backgroundColor` rather than poisoning the CSS for adjacent slots. The filament-type text (`{entry.filament_type || '—'}`) keeps its existing position to the right of the swatches. **What this does NOT fix:** the reporter also flagged that new multi-color prints don't appear in the filament usage history. That's a separate code path (`backend/app/services/usage_tracker.py::_track_from_3mf` and the slot-to-tray mapping chain at `usage_tracker.py:899-901`), where the diagnostic needs the archive's captured `ams_mapping`, the `mapping` field from MQTT push_status at print start, and the `[UsageTracker] PRINT START` / `PRINT COMPLETE` log lines — none of which are in the reporter's first bundle. Tracking under #1731 part 2, blocked on a support bundle from the affected install. **Tests:** existing `ArchivesPage.test.tsx` (23 cases) green; ESLint clean; `npm run build` clean; i18n parity 5107 leaves × 11 locales green (no new keys). Frontend-only change.

- **Finish-photo force-on removed; user's explicit timelapse=off in the slicer send dialog is now respected (#1721, reported by @agrisci)** — On H2D 01.x firmware, `capture_finish_photo` (default-on global setting) was forcing every print's `timelapse` MQTT field to `enable` regardless of whether the user had unchecked the Timelapse box in OrcaSlicer's send dialog. That bit flips the printer's runtime `timelapse_record_flag`, which un-gates the slicer-baked `M1002 judge_flag timelapse_record_flag` / `M622 J1` / `G1 X-48.2 F3000` / `M971 S11 C11 O0` wipe blocks emitted by **Smooth**-mode timelapse profiles — so the toolhead parked off the part and snapped a frame every single layer, on prints the user explicitly opted out of recording. The reporter's gcode export confirmed the macro block was baked in (28 occurrences across the file) and the printer's MQTT log showed `Sending print command: {"print": { … "timelapse": true, … }}` even though the slicer-side checkbox was unchecked. Live-stop confirmed: turning the global `capture_finish_photo` setting off in Bambuddy made the per-layer parking stop immediately. **Root cause:** the #1397 "finish photo from timelapse" feature used "force the printer into timelapse-recording mode at dispatch" as the side-channel to get a well-framed end-of-print shot (toolhead parked, before bed drop, extracted from the recorded video's last frame). That mechanism conflated two semantically different things — recording a timelapse video vs. snapping a finish photo — and the per-layer side effects of the recording mode were decided at slice time by the user's `timelapse_type` profile setting, which Bambuddy has no visibility into post-slice. Traditional-mode gcode has no per-layer wipe block (no parking, no defects) — so the bug was invisible to anyone whose slicer profile defaults to Traditional. Smooth-mode gcode (the reporter's case) bakes the wipe block and gates it on `timelapse_record_flag`, so flipping the runtime flag fired the macro every layer. **Fix:** replaced the force-on mechanism entirely with a clean MQTT-state-driven trigger. `bambu_mqtt.py::_handle_push_status` now fires a new `on_finish_photo_moment` callback when `stg_cur` transitions INTO **22** ("Filament unloading") while `_was_running == True` AND the end-of-print gate matches (`progress >= 99` OR `layer_num >= total_layers` OR `remaining_time <= 0`) — that's the same framing window #1397 was after (toolhead parked, bed not yet dropped, AMS pulling filament back) but reached via a clean state signal instead of by exploiting the per-layer macros. The end-of-print gate is what disambiguates from mid-print filament swaps in multi-color prints, which ALSO transit through stage 22 (M620 unload → 22, M621 load → 24) but always at progress < 99 / layer < total / remaining > 0. A FINISH-state fallback in the same handler fires the same callback at the existing FINISH-state transition if stage 22 never arrived — covers cancel-mid-print (state goes RUNNING → IDLE / FAILED without 22), external-spool-only prints where some firmwares skip the unload phase, HMS halts before unload, and any firmware variant we don't see stage 22 on. Net behavior: every print that gets a finish photo today still gets one; the lucky majority get the better-framed pre-bed-drop shot too. `main.py::on_finish_photo_moment` is a new top-level handler that pre-captures one camera frame at the trigger edge — external camera (snapshot URL → MJPEG fallback), buffered live RTSP frame from `_active_streams` / `_active_chamber_streams`, or a fresh RTSP grab via `capture_camera_frame_bytes` — and caches the JPEG bytes in a module-level `_stage22_finish_frames: dict[int, bytes]` keyed by printer_id. `_background_finish_photo` (inside `on_print_complete`) consumes the cached bytes via `_stage22_finish_frames.pop(printer_id, None)` before falling through to its existing live-grab chain, so the saved photo has the better framing without the existing complex archive-resolution / fallback / notification wiring needing to move. When a timelapse IS actively recording (user explicitly opted in this time), the pre-capture is skipped — `_capture_finish_photo_from_timelapse` still extracts the last frame from the recorded video, which is still the highest-quality option and now has no force-on side effects because the user actually wanted the video. **What was removed:** `resolve_effective_timelapse` in `background_dispatch.py` (the shared force-on resolver), `BackgroundDispatchService._resolve_effective_timelapse` wrapper, both call sites in `background_dispatch.py` (`_run_reprint_archive` + library-file print path), the `resolve_effective_timelapse` call in `print_scheduler.py::_dispatch_item`, the `archive.bambuddy_forced_timelapse` write in the resolver, the `if archive.bambuddy_forced_timelapse: await _cleanup_forced_timelapse(...)` branch in `_background_finish_photo`, and the entire `_cleanup_forced_timelapse` function (~75 lines including the FTP-DELE walk across `/timelapse` / `/timelapse/video` / `/record` / `/recording`). All call sites now read `bool(item.timelapse)` / `bool(job.options.get("timelapse", False))` directly — the literal user choice flows straight through to `start_print(timelapse=…)`. The `archive.bambuddy_forced_timelapse` DB column stays defined (default `False`) for back-compat with existing rows that may have it set to `True` from before — no consumer reads it anymore, and dropping a column on the user-data table risks breaking restore-from-backup flows we don't need to break. **New callback wiring:** added `on_finish_photo_moment` parameter to `BambuMQTT.__init__`, new `_finish_photo_captured` one-shot flag (reset on each new print at the same site as `_completion_triggered`), new `PrinterManager._on_finish_photo_moment` field + `set_finish_photo_moment_callback` setter, new `on_finish_photo_moment` inner wrapper in `_setup_callbacks`, threaded through to the `BambuMQTTClient` constructor call. `main.py::on_print_start` clears any leftover `_stage22_finish_frames` entry from a prior print so a never-consumed cache (e.g. capture succeeded but on_print_complete bailed before reaching it) can't bleed into the new print's photo. **Tests removed:** `test_cleanup_forced_timelapse.py` (~290 lines, 7 test cases pinning the FTP-DELE walk and `bambuddy_forced_timelapse` flag handling), `test_scheduler_force_timelapse_wiring.py` (the source-pattern check that pinned `print_scheduler.py` imports `resolve_effective_timelapse`), `test_dispatch_force_timelapse.py` (5 test cases pinning the `_resolve_effective_timelapse` wrapper's interaction with `capture_finish_photo` + archive flag). The behaviour these tests verified is intentionally gone. **Tests updated:** `test_background_dispatch_watchdog.py` dropped two `patch.object(BackgroundDispatchService, "_resolve_effective_timelapse", ...)` blocks that stubbed the now-removed method; `test_background_dispatch.py::test_dispatch_options_pass_through_pattern` comment updated to explain why `timelapse` stays excluded from the bare-pattern needle check (the wrap in `bool(...)` is intentional to coerce non-bool option payloads, not a force-on remnant). **Verification:** ruff clean; full backend suite 5961/5961 green with `-n 30`; ESLint clean; `npm run build` clean; vitest 2118/2118 green; i18n parity 5107 leaves × 11 locales green (no new keys). No migration. **What this does NOT change:** users who explicitly enable the Timelapse checkbox in the slicer send dialog still get the timelapse video AND the timelapse-extracted finish photo (highest-quality framing, no per-layer parking because that was never the issue — it's the user's intentional choice). Users who explicitly disable the Timelapse checkbox now get no per-layer parking AND still get a finish photo (pre-captured at the stage-22 edge for the same pre-bed-drop framing).

- **Configure AMS Slot: filament profiles for other printer models now filtered out (#1623, reported by @shaddowlink)** — Three independent gaps in the same picker, each surfaced by a different round of reporter screenshots. **(1) Local "Custom" imported profiles** were unconditionally listed regardless of the slot's printer; a user with PETG / PLA profiles imported from OrcaSlicer / BambuStudio for A1 mini, H2D, and P1S saw all three lined up when configuring an AMS slot on any one of those printers. **(2) Cloud presets using the `@Bambu Lab <long-name>` suffix form** (user-renamed Bambu Cloud presets and most Orca Cloud profiles) slipped through the existing filter, which only matched the `@BBL <short-code>` form Bambu's system presets use. **(3) Cloud presets with the printer model in the BODY of the name** (the literal failure shape the reporter screenshotted on H2D: `"X1C eSUN PETG-Basic Filament"` with no `@` suffix at all) — the existing extractor returned null for these and the filter no-op'd. **Fix:** `ConfigureAmsSlotModal.tsx` now (a) queries the backend's Bambu printer-model registry (`/slicer/printer-models`, same fetch SliceModal uses), (b) for local presets — reverse-looks-up the slot's short model code to a long printer-preset fragment, pairs it with the slot's nozzle diameter to synthesise the full slicer preset name ("Bambu Lab P1S 0.4 nozzle"), and passes that into `presetCompatibility(...)` from `utils/slicerPrinterMatch.ts` against each local preset's parsed `compatible_printers` JSON; (c) for cloud / Orca Cloud presets — `extractPresetModel(name, registry)` is now multi-strategy: first the `@BBL <code>` form (existing), then the `@Bambu Lab <long-name>` form with case-insensitive reverse-lookup against the registry (so "A1 mini" vs "A1 Mini" capitalisation drift doesn't hide A1 Mini profiles, preserving the #1649 alias-aware match), then a body-text scan against every known model token (long-name fragments and short codes from the registry, long-first sort so "A1 Mini" / "X1 Carbon" / "H2D Pro" aren't eaten by their shorter siblings, word-boundary regex so "PA1" doesn't match "A1" and "X1Box" doesn't match "X1"). Presets where no strategy resolves still pass through — free-form names with no recognisable model token stay visible (can't filter what we can't classify). **Fail-open posture preserved:** `match` and `unknown` verdicts keep showing for local presets (back-compat for hand-edited imports without `compatible_printers`); the currently-configured preset (`slotInfo.savedPresetId`) bypasses the filter so the active selection always remains visible; built-in filaments stay unfiltered (generic fallback); when the registry hasn't loaded yet OR `printerModel` is empty, every filter no-ops. **No backend / schema / i18n changes.** Frontend ESLint clean; `npm run build` clean; vitest `ConfigureAmsSlotModal` 24/24 green.

- **Virtual Printer: empty AMS slots forwarded as phantom loaded filaments to BambuStudio Sync (#1726, reported with full code-level analysis by @needo37)** — On any VP bound to a target printer (Proxy mode, or Queue mode with a specific target), the slicer-facing AMS state was the printer's raw push_status — the empty-slot cleanup that `bambu_mqtt.py::_handle_ams_data` applies to Bambuddy's own internal state was NEVER run on the bridge cache. Concrete case: real printer has 3 filaments loaded (AMS-A slots 2/3/4), AMS-A slot 1 and all of AMS-B empty; Bambuddy's AMS card renders the empty slots correctly as Empty (control — internal state path is fine), but BambuStudio after Sync paints 7 populated/green-checked filament slots — the 3 real ones plus 4 phantoms whose color/material is stale RFID/calibration data from before those slots went empty. The diagnostic signature is the mismatch between the AMS card (correct) and the slicer view (wrong) for the same payload. Archive mode and Queue-by-model are NOT affected — no target printer → no bridge → the slicer gets the synthetic stub at `mqtt_server.py:927` with no real AMS data. **Root cause:** two code paths consume the same printer AMS payload. Internal (`bambu_mqtt.py::_handle_ams_data` lines 1802-1858) parses `tray_exist_bits`, promotes empty slots to `state=9`, and wipes the stale `tray_type`/`tray_color`/`tray_info_idx`/`tag_uid`/`tray_uuid`/`remain` fields. VP bridge (`mqtt_bridge.py::_on_printer_raw` lines 551-656) deep-merges AMS structurally via `_merge_ams_dict` and copies `tray_exist_bits` through as an opaque top-level scalar — but never applies the bit→clear-empty-slot logic. The cached state ships to the slicer untouched. **Fix:** factored the bit-clear logic out of `_handle_ams_data` into a shared module-level helper `bambu_mqtt.py::apply_tray_exist_bits(units, tray_exist_bits_str, *, power_on_flag, log_label)` and call it from both paths. The internal call site is replaced with a single helper invocation; the bridge calls it on the merged AMS dict after `_merge_ams_dict` runs, before the 1 Hz cached-as-base push picks the cache up. Shared shutdown guard preserved on both sides: all-zero bits + `power_on_flag=False` is the printer-off pattern (#765) and skips cleanup — a non-zero bits + power-off combo is valid idle-printer state (#1365 — X1C between prints) and still applies. AMS-HT units (`id >= 128`) skipped on both sides (separate addressing scheme). **Tests:** new `TestApplyTrayExistBitsHelper` class in `test_bambu_mqtt.py` (10 cases pinning the helper contract directly — missing/unparseable bits → no-op, shutdown guard, nonzero+power-off X1C case, int-9 state, AMS-HT skip, string id handling, multi-AMS global bit math, state-promote-even-without-stale-data). 3 new bridge regression tests in `test_vp_mqtt_bridge.py::TestPushStatusCache`: `test_tray_exist_bits_clears_empty_slots_in_slicer_cache` reproduces the #1726 wire shape (slot 0 carries stale `tray_type`/`tray_color`/`tray_info_idx`/`tag_uid`/`tray_uuid`/`remain` + `tray_exist_bits="e"` → slot 0 must clear, slots 1-3 preserved), `test_tray_exist_bits_shutdown_guard_preserves_cache` pins the printer-off path won't propagate phantom empties on every reconnect, `test_tray_exist_bits_skips_ams_ht_units` pins the HT addressing skip. Existing internal-state tests for the bit-clear logic (`test_tray_exist_bits_clears_empty_slots`, `test_tray_exist_bits_promotes_empty_slot_to_state_9`, `test_tray_exist_bits_does_not_change_state_on_loaded_slots`, …) continue to pass against the refactored internal path — same contract, same behavior, different implementation seam. One pre-existing bridge fixture (`test_partial_ams_unit_update_preserves_other_units`) had an inconsistent `tray_exist_bits="3"` for two AMS units (bit 0 set, bit 4 unset, but both unit 0 and unit 1 had slot 0 populated as loaded). The fix exposed the inconsistency — corrected to `"11"` (bits 0 + 4) to match what the real printer would send. Full backend suite 5955/5955 green; ruff clean; i18n parity 5107 leaves × 11 locales green (no new keys). Frontend untouched. **Verification on a live system (per @needo37's analysis):** set `BAMBUDDY_VP_DUMP_WIRE=1`, restart, Sync the slicer, inspect `<log_dir>/vp_wire/<vp>_out.json`. For any tray whose bit in `tray_exist_bits` is 0, `tray_type`/`tray_color` should now be empty.

- **Windows: `/api/local-backup/status` 500 on `ZoneInfoNotFoundError: 'No time zone found with key UTC'` (from a user's log on the Windows installer)** — Reported via a Windows traceback against the new local-backup status endpoint. The stdlib `zoneinfo` module reads the system IANA tz database on Linux/macOS, but Windows has none — and the embedded Python in our Windows installer doesn't carry the `tzdata` PyPI package either, so even `ZoneInfo("UTC")` raises `ZoneInfoNotFoundError`. `_local_zone()` in `services/local_backup.py` only caught that exception for the `TZ`-env branch; the empty-`TZ` fallback and the unrecognised-`TZ` fallback both unconditionally called `ZoneInfo("UTC")` and re-raised, bubbling out of the FastAPI handler as a 500. **Fix (two parts):** (1) `_local_zone()` is now resilient — return type widened from `ZoneInfo` to `tzinfo`, the `UTC` fallback is wrapped in its own try, and the last-resort fallback returns the stdlib `datetime.timezone.utc` (which needs no IANA DB and satisfies every `astimezone` / `str()` call site downstream — `str(timezone.utc) == "UTC"` matches the previous response shape). Restores function on existing Windows installs without re-bundling. (2) `requirements.txt` now pins `tzdata>=2024.1; sys_platform == "win32"` so the next Windows installer build ships the IANA DB and any non-UTC `TZ` value (e.g. `Europe/Berlin`) resolves correctly — the stdlib fallback can only ever give UTC. Linux/macOS unaffected: the platform marker keeps them on the system tz DB they already have. **Tests:** new `test_zoneinfo_completely_unavailable_falls_back_to_stdlib_utc` in `test_local_backup.py` monkeypatches `ZoneInfo` to always raise `ZoneInfoNotFoundError` and pins that `_local_zone()` returns `datetime.timezone.utc` rather than propagating. 31/31 local_backup tests green; ruff clean.

- **Print-modal "off" toggles for `flow_cali` and `nozzle_offset_cali` now actually suppress the calibration stage (live-tested on H2D 01.x)** — The Re-print / Schedule modal toggles for Flow Calibration and Nozzle Offset Calibration accepted the user's "off" choice and flowed it correctly through to the `project_file` MQTT publish — Bambuddy sent `extrude_cali_flag: 2` and `nozzle_offset_cali: 2` per our reading of "1 = run, 2 = skip" inherited from the #1478 / #1682 work. Live test on an H2D running firmware 01.x: with both toggles off in Bambuddy's modal, the printer's `stg` queue (the pre-print stage list firmware publishes via push_status) still included stage **8** ("Calibrating dynamic flow") and stage **39** ("Nozzle offset calibration") — and physically ran them at print start. The `2` value did NOT suppress the stage despite our earlier "skip and reuse stored PA" reading. **Root cause:** the encoding for the "off" wire value is `0`, not `2`. The `2` value appears to mean "skip the explicit calibration pass but still apply / verify the stored PA value via the calibration stage" — close to a no-op in terms of K-factor but the printer still queues the stage and runs the per-print physical sequence. `0` is what actually drops the stage from the `stg` queue. A real BambuStudio Send-dialog capture on the same firmware (proxy-mode VP echo) also showed `0` for both fields when calibrations are unchecked, contradicting the #1478 commit message which read `0` as "never sent by BambuStudio." **Fix:** `bambu_mqtt.py::start_print` — `extrude_cali_flag` is now `1 if flow_cali else 0` (was `2`), and `nozzle_offset_cali` is `1 if (nozzle_offset_cali and is_dual_nozzle) else 0` (was `2`). The dual-nozzle gate stays — single-nozzle prints continue to force-skip the nozzle-offset calibration their head doesn't support (#1682). `1` (run) is unchanged on both fields. **Verification:** live re-test on the same H2D with both toggles still off — `stg: [29, 13, 4, 14, 3]` (cooling, homing, filament change, nozzle cleaning, vibration comp). Stages 8 and 39 dropped out cleanly. **What's NOT fixed:** `vibration_cali` is a JSON `false` bool in both Bambuddy's and BambuStudio's wire format, and the H2D firmware queues stage **3** ("Vibration compensation") regardless of the bool value — this is firmware-side and not solvable at our dispatch layer with the current field. Captured as a follow-up to investigate whether a parallel `vibration_cali_flag` integer field exists. **Tests:** `test_bambu_mqtt.py` — `test_p2s_uses_boolean_format` flipped `extrude_cali_flag == 2` → `== 0`; `test_nozzle_offset_cali_default_is_skip`, `test_nozzle_offset_cali_ignored_on_single_nozzle`, `test_nozzle_offset_cali_false_on_dual_nozzle` flipped `== 2` → `== 0`; docstrings updated to reflect the #1721 finding. The `1 if user_wants` branch in both tests for the "on" case is unchanged. 281/281 bambu_mqtt tests green; full backend suite 5941/5941 green with `-n 30`; ruff clean; frontend untouched (rebuild + i18n parity confirmed clean per `feedback_run_all_ci_checks`).

- **Support-bundle log noise: VP bridge nudge + SD-card cleanup (#1721 adjacent, observed on reporter's A1)** — Two warnings polluting every A1 support bundle on a healthy print. Neither was the cause of #1721's timelapse complaint — both are adjacent noise. **(1) `request_status_update: not connected`** — `mqtt_bridge.py::_resolve_client` calls `_request_version` + `request_status_update` immediately after attaching a raw-message handler so the bridge cache populates without waiting for the next periodic pushall. The bind frequently races the real printer's MQTT TLS handshake — a slicer-side reconnect re-resolves the client before the underlying session has reconnected, especially on A1 firmware which reconnects more aggressively than X1/H2/P. `request_status_update` logs `[serial] request_status_update: not connected` at WARNING on the not-connected return path. The nudge is a best-effort optimisation; the fall-through (next periodic pushall) populates the cache anyway, so the WARNING fires on routine, expected, recoverable state. **Fix:** gate both nudges on `current.state.connected` at the bind site. When the client comes up, the next `_resolve_client` tick re-enters this branch on identity change OR the periodic pushall in `bambu_mqtt.py` fills the cache — same end state, no benign WARNING. The WARNING in `bambu_mqtt.py:3224` is unchanged: it's still a real signal for the other callers (`/printers/{id}/refresh-status` user API, bug-reporter helper) where "you asked for a refresh on a dead client" is genuinely worth logging. New `test_post_bind_nudge_skipped_when_target_not_connected` in `test_vp_mqtt_bridge.py::TestBridgeLifecycle` pins the contract. **(2) `SD card cleanup failed after 3 attempts ... (file may linger on SD card)`** — The post-finish helper in `main.py` deletes the uploaded file from the printer's SD card to prevent the ghost-print-on-power-cycle behaviour (#374, #1542). It tries up to three candidate paths (`derive_remote_filename(archive.filename)`, then `{subtask_name}.3mf`, then `{subtask_name}.gcode`), each up to 3 times with 2 s backoff, then logs WARNING if all fail. `delete_file_async` returned `bool` — `True` for success, `False` for ANYTHING else (FTP 550 file-not-found, network error, auth fail, transient FTP error). The A1 firmware (and most other Bambu firmwares post-print) cleans the SD-card upload itself before our cleanup runs, every candidate FTP-DELE returns 550, all three retries × three candidates × 2 s sleeps fire, then WARNING. That WARNING shouldn't exist on a healthy print where the printer self-cleaned. The same shape exists in `_cleanup_forced_timelapse` (#1397) walking the four timelapse dirs. **Fix:** `bambu_ftp.py` now exports a `DeleteResult` enum (`DELETED` / `NOT_FOUND` / `FAILED`). `BambuFTPClient.delete_file` detects the 550 case via `isinstance(e, ftplib.error_perm) and str(e).startswith("550")` (same pattern already used in the download path for the symmetric `FileNotOnPrinterError` sentinel from #972). `delete_file_async` now returns `DeleteResult`. Both post-finish cleanup helpers (`main.py::on_print_finished` SD branch + `_cleanup_forced_timelapse`) only WARN when at least one candidate returned `FAILED`; an all-`NOT_FOUND` outcome logs DEBUG ("nothing to delete — printer likely self-cleaned"). The cleanup helper also no longer burns the 2 s × 3 retry budget on a `NOT_FOUND` result (550 will never recover by waiting); only `FAILED` triggers backoff. `DELETE /printers/{id}/files/...` returns 404 (not 500) on `NOT_FOUND`, more accurate for the user-facing UI. Three other production callers (`print_scheduler` pre-upload delete, two `background_dispatch` fire-and-forget cleanups) are unchanged at the call site — they discard the return value. **Tests:** `test_delete_file` and `test_delete_file_async` in `test_bambu_ftp.py` switched to the enum (3 cases each). 2 new regression tests in `test_cleanup_forced_timelapse.py`: `test_forced_no_warning_when_every_dir_returns_not_found` pins the #1721 path (every candidate dir → 550 → no WARNING, one DEBUG summary), `test_forced_warns_when_any_dir_returns_failed` pins the counterpart (any FAILED keeps the WARNING — that's the signal the maintainer wants). `caplog` asserts the log record's level + content directly. Full backend suite 5941/5941 green; ruff clean; frontend untouched (rebuild + i18n parity confirmed clean per `feedback_run_all_ci_checks`). No migration, no new i18n keys, no schema changes.

- **Virtual printer external spool (`vt_tray`) went "invalid" right after a slicer filament pick (#1622 round 5, reported by @shaddowlink)** — On a P1S in non-proxy VP mode, the reporter picked a filament for the external spool slot in BambuStudio's Device tab and the slot immediately rendered as invalid (color only, no profile, no K-profile, no nozzle temps), but recovered after a virtual-printer reload. AMS slot picks worked correctly. Wire dumps (BAMBUDDY_VP_DUMP_WIRE=1) captured the asymmetry: the bridge's outgoing 1 Hz cached-as-base push delivered `vt_tray = {tray_info_idx, tray_color}` — 2 fields — where a real P1S sends ~20 (`tray_type`, `state`, `remain`, `k`, `n`, `cali_idx`, `nozzle_temp_min/max`, `tray_uuid`, `xcam_info`, ...). The same `_out.json` showed AMS slots with the full 24-field dict because `_merge_ams_dict` deep-merged them. **Root cause:** Bambu firmware sends a partial `vt_tray` incremental right after acknowledging an `ams_filament_setting` for `ams_id=255` (external spool) — carrying just the fields the slicer's pick changed. The round-4 per-field accumulate (#1622 / da799447) carried over prev keys NOT present in new, but `vt_tray` IS present in new, so the cached dict was REPLACED wholesale with the 2-field partial. The next 1 Hz cached-as-base push handed the slicer the stripped vt_tray; BambuStudio rendered the slot as invalid. Reloading the VP forced a reconnect → pushall → full vt_tray restored, and the cycle repeated on the next pick. **Fix:** `mqtt_bridge.py::_on_printer_raw` now applies the same per-field accumulate one level deeper: for every top-level key whose prev AND new are both dicts, overlay new onto prev rather than replace. `ams` is explicitly excluded (already deep-merged by `_merge_ams_dict`). The same overlay protects `device`, `online`, `upgrade_state`, `ipcam`, `upload`, `net` against future firmware partials with the same shape; the `net.info` IP rewrite path is unaffected because `_rewrite_net_info_ips` runs against `new_state["net"]` before caching and the rewritten list overrides the cached one on overlay (only `net.conf` and friends, when sent without `info`, draw from prev now). **Tests:** new `test_partial_vt_tray_update_overlays_onto_cached_full_dict` regression case in `test_vp_mqtt_bridge.py::TestPushStatusCache` constructs the exact P1S wire shape — pushall with the full ~20-field vt_tray, followed by the `{tray_info_idx, tray_color}` partial that shaddowlink's dump captured — and asserts `tray_type`, `state`, `remain`, `k`, `n`, `cali_idx`, `nozzle_temp_min/max`, `tray_uuid`, `id` all survive while the two incoming fields take their new values. All 53 bridge tests stay green; 287/287 across the broader VP test surface (mqtt_bridge / mqtt_server / vp_wire / virtual_printer); ruff clean. Bridge code path only; no migration, no new i18n keys, no frontend touch.

- **Library G-code preview returned raw ZIP bytes as `text/plain` for sidecar-sliced rows (#1709, root cause + fix from @yanglei1980)** — `slice_and_persist` writes its output as a `.gcode.3mf` (a ZIP container with embedded G-code) but persisted the LibraryFile row with `file_type="gcode"`. The G-code preview endpoint at `library.py::get_gcode` short-circuits on `file_type == "gcode"` and streams the on-disk bytes with `media_type="text/plain"`, so every preview of a sidecar-sliced row handed the embedded viewer the raw ZIP body (`PK\x03\x04…`) instead of toolpath text — the viewer rendered nothing. External-folder scans (#1600) already typed `.gcode.3mf` rows correctly and hit the unzip branch, so the bug was specific to the sidecar slice path. Plain `.gcode` uploads were unaffected (their on-disk bytes really are text). **Fix:** (1) forward — `slice_and_persist` now persists `file_type="gcode.3mf"`, matching what `_classify_file_type` returns for the `.gcode.3mf` extension and what external-scan rows already use; (2) back-compat — `get_gcode` also routes to the unzip branch when the filename ends with `.gcode.3mf`, so rows already written under the bug self-heal on first preview without a DB migration. **UI gates:** three frontend call sites that gated badge colour or the preview-eye icon on `file_type == "gcode"` were extended to also accept `"gcode.3mf"` — `FileManagerPage.tsx` badge + viewer-affordance gate, `ProjectDetailPage.tsx` badge — so the new typing doesn't regress visuals. The print / queue / slice action buttons use filename-based helpers (`isSlicedFilename`, `isSliceableFilename`) that already accept `.gcode.3mf`, so they need no change. **Tests:** new `test_library_get_gcode_recovers_legacy_gcode_type_for_3mf` regression case in `test_library_api.py` constructs a row with `file_type="gcode"` + `.gcode.3mf` filename pointing at a real ZIP, asserts the response is `text/plain`, contains `G28`, and does NOT start with `PK` — pins the legacy-row recovery path. Existing `test_library_get_gcode_endpoint_accepts_compound_file_type` continues to cover the forward path. Full backend suite 5920/5920 green; ruff clean; frontend ESLint + `npm run build` clean; FileManagerPage / ProjectDetailPage / FileManagerExternalFolder vitests 69/69 green; i18n parity unchanged (no new keys). PR #1709 closed for CONTRIBUTING.md non-compliance (branched from main, no issue, template incomplete); root cause + fix shape preserved here on `dev`.

- **Cloud + Orca Cloud preset resolver: pin `type` and `from` to CLI-accepted values (#1712 follow-up, reported by maziggy on the Mecha Mewtwo slice)** — Removing bundle mode (entry above) routed every slot through the cross-tier preset resolver. Cloud-tier presets surfaced two latent shape mismatches that bundle dispatch had been masking by materialising preset JSONs from `.bbscfg`-on-disk. (1) **`type` field**: Bambu Cloud labels presets with `type: "printer"` / `"print"` / `"filament"`, but the BambuStudio CLI's `--load-settings` parser only accepts `"machine"` / `"process"` / `"filament"`. The user's first failing slice produced `operator(): unknown config type print of file preset.json in load-settings` with exit code -5; the sidecar surfaces this as a generic "The input preset file is invalid and can not be parsed." (2) **`from` field**: Bambu Cloud's filament detail endpoint routinely ships presets with empty `from` (or no `from` at all). The CLI's compatibility check rejects either with `operator(): file ... 's from  unsupported` (the double space in stderr = empty value). Same -5 exit, same generic "input preset invalid" surface. The sidecar's `normalizeFromField` already maps `"User"` / `"System"` → `"system"`, but it doesn't touch empty / missing values. **Fix:** `_resolve_cloud` and `_resolve_orca_cloud` now force `type = _SLOT_TO_PROFILE_TYPE[slot]` and `from = "system"` on the payload before `json.dumps`, mirroring what `_resolve_standard` already does for the standard-tier stub. Both fields are unconditionally rewritten — idempotent on already-correct payloads, and pinning to "system" is consistent with how Bambuddy presents these post-flatten presets to the CLI (no parent walk needed, the cloud detail comes back fully expanded). **Tests:** new `test_cloud_rewrites_type_field_for_cli` (7 parametric cases covering all six type-name variants Bambu Cloud emits plus the missing-type case), `test_cloud_pins_from_field_to_system` (4 cases: empty, already-system, GUI User, GUI System), and `test_cloud_synthesises_from_field_when_missing` (the actual Mecha Mewtwo failure shape) pin the resolver-level contract. Existing happy-path assertions for `_resolve_cloud` / `_resolve_orca_cloud` updated to include the new fields. 28/28 preset-resolver tests green, full backend suite 5919/5919 green, ruff clean. **What this can NOT recover:** if Bambu Cloud later starts emitting a `from` value other than empty / "User" / "System" that genuinely means something (e.g. "project"), Bambuddy will silently flatten it to "system" too. We accept that trade-off because the alternative is leaving "input preset invalid" failures on every cloud slice, and "system" matches how the sidecar's own resolver normalises the post-flatten state.

- **Virtual printer cache drained capability/lifecycle fields between pushalls, greying out Device-tab UIs (#1622 round 4, reported by @shaddowlink)** — Reporter on a P1S in archive mode saw the AMS-slot filament dropdown empty and the "Manage calibration data" UI disabled in BambuStudio's Device tab, while the same panels worked correctly on his H2D. After three rounds of triage on the printer-side payload (which traced clean — bridge passes `vt_tray` byte-identical, `tray_info_idx` resolves, AMS slots populate), the actual asymmetry surfaced in the bridge cache dumps: P1S cached `print` state contained 17 top-level keys; H2D contained 99. The missing fields were exactly the capability/lifecycle gates BambuStudio reads to decide which Device-tab UIs to enable (`cali_version`, `print_type`, `gcode_state`, `mc_print_stage`, `mc_stage`, `device`, `cfg`, `home_flag`, the `mc_*` family, fan speeds — ~80 fields). **Root cause:** Bambu firmware sends a full top-level field set in pushall responses (on `pushall` request / printer reconnect) and ~1 Hz incrementals carrying just what changed (typically temps, fan, wifi, status). `_on_printer_raw` in `mqtt_bridge.py` cached the latest push as `new_state = copy.deepcopy(print_data)` — replacing the prior cache wholesale — then re-merged only a hand-picked allowlist (`_SLICER_VISIBLE_STICKY_KEYS`) of 14 keys back from prev. The allowlist covered the #1371 / #1387 / #1228 / #1558 failure modes but missed capability/lifecycle fields entirely, so every 1 Hz incremental drained ~80 fields out of the cache and the slicer's gated UIs flipped off as soon as the cache thinned. The code comment claimed the cache "mirrors the same preservation pattern Bambuddy uses for its own internal state in bambu_mqtt.py" but it didn't: internal state is updated per-field (`if "X" in data: self.state.X = ...`), never drops what it's seen, and accumulates monotonically. **Fix:** replace the allowlist-preserve with per-field accumulate. For every key in the prior cache, carry over verbatim when the incoming push omits it; let new values overwrite when present. The `_merge_ams_dict` deep-merge for partial `ams` blobs stays (#1387 / #1371 regression guards still pass). `_SLICER_VISIBLE_STICKY_KEYS` is removed entirely — the new logic is a strict superset of every case the allowlist handled. **Why most P1S users don't hit it:** timing. The typical workflow is connect → BS issues pushall → cache fills → click Device tab within seconds → UI works. shaddowlink's sequence kept BS idle long enough between pushalls that the cache thinned to incremental-only state before he clicked. X1C users hit the same drain but don't notice — older BS capability spec doesn't gate the same UIs on `cali_version` / `mc_print_stage`. H2D escaped detection because his captures happened to land close to a pushall reply (cache still fat). **Tests:** new `test_incremental_push_preserves_non_allowlisted_capability_fields` regression case in `test_vp_mqtt_bridge.py::TestPushStatusCache` constructs a full push with `cali_version` / `print_type` / `gcode_state` / `mc_print_stage` / `mc_stage` / `device` / `cfg` / `home_flag`, follows it with a temps-only incremental, and asserts every capability field survives. All 51 existing bridge cache tests stay green — same behaviour for the allowlist subset, plus the formerly-dropped fields. Bridge code path; no migration, no new i18n keys.

- **Force-color-match checkbox missing when scheduling against a specific printer (#1717, reported by @SamNuttall)** — The Print Queue's schedule dialog hides the per-slot "Force color match" checkbox in the "Specific printer" path. Picking "Any A1" (model-mode dispatch) renders `FilamentOverride` which carries the checkbox, but picking a single printer renders `FilamentMapping` instead — a separate component that had no force-match UI. The dispatcher in `print_scheduler.py:535` already honours `force_color_match` regardless of how the queue item was created (the flag survives end-to-end on the `filament_overrides` payload `buildFilamentOverridesArray` constructs in `PrintModal/index.tsx:613`), so this was a pure UI gap — printer-mode users could not request the safety guard from the modal even though the backend would have respected it. **Fix:** `FilamentMapping` accepts new optional `forceColorMatch` + `onForceColorMatchChange` props mirroring `FilamentOverride`'s shape; it renders the same `<Palette>`-iconed checkbox under each filament row when a handler is provided. `PrintModal/index.tsx:1100` passes the existing `forceColorMatch` state and a `setForceColorMatch` setter through — same state object both modes write into, so toggling between modes preserves what the user selected. No new i18n keys (the existing `printModal.forceColorMatch` key already ships in all 11 locales). The checkbox is suppressed when no handler is wired (avoids dead UI in callers that don't manage the flag). **Tests:** new `renders the per-slot force-color-match checkbox in printer mode (#1717)` case clicks the checkbox and asserts `onForceColorMatchChange(slotId, true)` fires; companion `omits the force-color-match checkbox when no handler is provided` case pins the absent-handler branch. Existing FTS dropdown-filter tests stay green. `FilamentMapping.test.tsx` 4/4 green; combined PrintModal + FilamentOverride + FilamentMapping suite 73/73 green; eslint clean; frontend build clean; i18n parity 5120 leaves × 11 locales green.

- **In-app updater fails when DATA_DIR is on a separate mount from the install (#1715, reported by @francescocozzi)** — Native installs that follow the systemd template `WorkingDirectory=/opt/bambuddy` with `Environment="DATA_DIR=/srv/bambuddy/data"` (or any layout where `DATA_DIR` is not a subdirectory of the install path) couldn't apply in-app updates. Every git step in `_perform_update` (`remote get-url`, `remote set-url`, `fetch`, `reset --hard`) used `cwd=settings.base_dir`, and `safe.directory` was pointed at `base_dir` too. On the standard install (DATA_DIR=INSTALL_PATH/data) this happened to work by accident — git walks up from a subdirectory of the repo to find `.git` — but on a separate-mount layout the data dir is not under the install, the walk-up has nowhere to go, and every operation returns "fatal: not a git repository." Even on the standard install `safe.directory={base_dir}` was wrong (it must equal the repo root git discovers, not the data dir), surfacing on hardened systemd units as "fatal: detected dubious ownership." **Fix:** route every git subprocess in `_perform_update` and `_origin_points_at_repo` through `cwd=settings.app_dir` (the working tree), and set `safe.directory={app_dir}` to match. `app_dir` is now resolved once at the top of `_perform_update` instead of lazily re-resolved before the pip step. The `base_dir` parameter on `_origin_points_at_repo` is renamed to `app_dir` so the signature documents the contract. The pip-install step keeps `cwd=app_dir` (unchanged — that step was already correct). **Tests:** new `test_perform_update_runs_git_in_app_dir_when_data_dir_on_separate_mount` integration case constructs a sibling-paths layout (`tmp/opt/bambuddy` + `tmp/srv/bambuddy/data` — the exact #1715 shape), mocks `asyncio.create_subprocess_exec` to capture every call's cwd, and pins (a) every git subprocess runs with `cwd=app_dir`, (b) the embedded `safe.directory=` config equals `app_dir` on every git call. The existing pip-cwd test stays green (pip's cwd was already `app_dir`). Existing SSH-origin-preserve + origin-rewrite + reset-target tests stay green (they don't assert on git cwd). Full `test_updates_api.py` 21/21 green; ruff clean. **Credit:** root cause + fix shape from francescocozzi via PR #1716 (couldn't be merged as-is — that branch had drifted off an older `dev` and pulled in unrelated upstream commits including a version regression).

- **SliceModal preset-lookup precedence + cross-tier dedup + signed-out banner (#1712, reported by @IndividualGhost1905)** — After the Orca Cloud integration shipped (2026-06-04), every user — including Bambu-Cloud-only / Bambu-Studio-preferred users — got Orca Cloud as the top tier across the SliceModal preset picker, the per-preset auto-pick scoring, the dropdown's optgroup rendering, the AMS slot picker's filament sort, and the backend dedup precedence. A Bambu-Cloud / X1C user reported seeing his Bambu Cloud profiles disappear from auto-pick because Orca Cloud's empty tier shadowed them. The cross-tier dedup (introduced with #1150 and inherited as-is by the Orca change) compounded the problem: a name that existed in multiple tiers showed in only ONE group, so a user with a local-imported and Orca-synced "Bambu PLA Basic" never saw the Orca copy as a picker option — even though they curate both sources. And the cloud-status banner (`CloudStatusBanner`) nagged signed-out users with a permanent *"Sign in to Orca Cloud (Profiles → Orca Cloud) to see your Orca presets"* at the top of every SliceModal open — even after a user had explicitly logged out of Orca Cloud. The Bambu Cloud banner had the symmetric problem. **Fix — order:** precedence is `local > orca_cloud > cloud > standard` across `SliceModal.tsx` (`SLICE_MODAL_TIER_ORDER` + `TIER_BONUS` + dropdown tier list), `ConfigureAmsSlotModal.tsx` (`sourceOrder`), and docstrings in `slicer_presets.py` / `schemas/slicer_presets.py` / `client.ts`. Local imports win (the user did them on purpose), Orca Cloud comes next, Bambu Cloud, bundled fallback last. The order drives auto-pick + visual group order; it does NOT hide profiles. **Fix — no dedup, full lists:** `_dedupe_by_name` is replaced by `_enrich_cloud_metadata`, which returns every tier's full preset list across all three slots (printer / process / filament) — a name in local AND orca_cloud AND cloud renders in EACH of their groups so the user can pick any source. The only work the function still does is filament-metadata backfill: a Bambu Cloud filament without its own `filament_type` / `filament_colour` inherits values from a same-named local / orca_cloud / standard entry so it can still score in `pickFilamentForSlot`. Printer + process presets carry their metadata inline and need no enrich. Frontend code already iterates tiers in priority order and surfaces every entry — no change needed there once the backend stops filtering. **Fix — banner:** `CloudStatusBanner` now silently returns null on `not_authenticated` in addition to `ok` — applies symmetrically to both Bambu and Orca cloud banners. `expired` (token broke) and `unreachable` (network / service down) still surface — those are real breakage states a previously-signed-in user needs to see. Sign-in lives on the Profiles page; the modal doesn't need to advertise it. The `slice.cloud.notAuthenticated` / `slice.orcaCloud.notAuthenticated` i18n keys stay in the locale files (dormant) so re-enabling later doesn't need a re-translation pass. **Fix — ConfigureAmsSlotModal source badges:** before this change, the per-row source badge fired three branches independently — `local` got a green "Local" badge, `builtin` got an amber "Built-in" badge, and a blue "Custom" badge appeared on top of those when `isUser` was true. Since ALL Orca Cloud entries are marked `isUser: true` and Bambu Cloud user presets also get the same flag, the result was visually inconsistent: Orca Cloud rows showed *only* "Custom" (no source identification, no way to tell them from Bambu Cloud user presets), Bambu Cloud built-in rows had NO badge at all, and the "Custom" badge collided with the actual source. Replaced with a single source badge per row: green "Local", purple "Orca Cloud" (new), bambu-blue "Bambu Cloud" (new), amber "Built-in". One badge per row; one colour per source; the `isUser` distinction within the Bambu Cloud tier is dropped (the preset name itself carries the "is this user-authored" signal). Same change in both render blocks (the filament-list code is duplicated in the modal — kept the duplication local rather than refactoring out a helper component in this PR to keep the diff tight). i18n: 2 new keys (`configureAmsSlot.orcaCloud`, `configureAmsSlot.bambuCloud`) translated to all 11 locales — both are brand names, already on the per-locale `IDENTICAL_TO_EN_ALLOWED` lists so the parity check is satisfied without per-locale variants. The dormant `configureAmsSlot.custom` key stays in the locale files. **Tests:** `TestEnrichCloudMetadata` replaces `TestDedupeByName` (5 cases): regression guard pinning that a name in all four tiers appears in EACH (not just local), tier order preserved within a tier, Bambu Cloud filament metadata backfilled from local, backfill falls through to orca / standard when local doesn't carry the name, backfill does NOT overwrite Bambu Cloud's own metadata when present. The "renders a sign-in banner when cloud_status is not_authenticated" case flipped to assert no banner appears, with the test name updated to call out the #1712 reason. Backend `test_slicer_presets.py` 47/47 green; `SliceModal.test.tsx` 34/34 green; `ConfigureAmsSlotModal.test.tsx` 24/24 green; ruff clean; frontend build clean; i18n parity 5120 leaves × 11 locales green.

- **Telegram (and other image-bearing) finish notification on a reprint-from-archive showed the original print's finish photo instead of the new run's (#1707, reported by @kycrna)** — P2S user reprinted an archived job and observed the Telegram notification arriving with the photo of the *original* print (white box) attached to the completion message for the *new* run (black box). **Root cause:** reprints reuse the source archive row — `register_expected_print` stores the source `archive_id` in `_expected_prints`, and the on-print-start expected-archive promotion branch at `main.py:2207-2245` updates the row's status / started_at / printer_id / subtask_id but never reset `archive.timelapse_path`. Two failure modes cascaded from the stale path: (a) `_scan_for_timelapse_with_retries` early-returns at `main.py:3062` with `if archive.timelapse_path: return` — the reprint's new timelapse MP4 sitting on the printer's SD card was never downloaded, the archive's `timelapse_path` kept pointing at the original run's local file; (b) `_capture_finish_photo_from_timelapse` polls `archive.timelapse_path` and immediately found the *original* video, extracted ITS last frame as `finish_<fresh-timestamp>_<uuid>.jpg`, and handed those bytes to `_background_notifications` as `image_data` — which then went out to Telegram via the `sendPhoto` path. The filename was new (so log lines and the archive's `photos` list looked correct), but the pixels were the original run's finish frame. Surface was specific to the timelapse-prefer path: with `data.timelapse_was_active` true and no external camera, `prefer_timelapse_source` was True, which is the exact configuration on P2S with timelapse-on for both runs. External-camera, buffered-frame, and fresh-RTSP fallback paths grab the *current* camera frame, so users on those paths saw correct photos and the bug stayed hidden. **Fix:** at expected-archive promotion, capture and clear `archive.timelapse_path` to None before the commit, and `os.unlink` the stale on-disk video so reprints don't accumulate orphaned MP4s in the archive directory. Photos list is left alone — accumulating one finish photo per run across the archive's lifetime is the right behaviour. The unlink is wrapped in `OSError`-catching best-effort logging so a missing file (manual delete, archive purge, container rebuild with bind-mount drift) doesn't break promotion. The clear-and-unlink runs unconditionally when `timelapse_path` is set, so even if a user has been reprinting under the buggy build for months, the next reprint self-heals. **Tests:** 3 new cases in `test_reprint_clears_stale_timelapse.py` exercise the full `on_print_start` callback through the expected-archive branch — happy path (path cleared + file unlinked), no-prior-timelapse (no-op, promotion still succeeds), missing-stale-file (best-effort unlink doesn't raise). Full `test_print_start_expected_promotion.py` + `test_print_start_assigns_printer_id_to_vp_archive.py` suite (28/28) stays green; ruff clean.

- **Connection diagnostic no longer flags `external_storage: fail` on A1 / A1 Mini, which physically have no MicroSD slot (#1703, reported by @MartinNYHC)** — Bug report from an A1 user complained that BambuStudio and OrcaSlicer don't have an "external storage" tick box (correct — there's nothing to toggle, the A1 series ships without a SD card slot at all) while the Bambuddy support bundle simultaneously reported `external_storage: fail` in the printer's connection diagnostic. The two together left the user thinking Bambuddy was wrong about a setting their hardware doesn't have. **Root cause:** the `external_storage` check at `services/printer_diagnostic.py:179-189` reads `state.store_to_sdcard`, which is parsed from MQTT `home_flag` bit 11. On A1 and A1 Mini that bit is never set (no hardware slot, no firmware-side toggle, no slicer-side equivalent), so the value pushes as `False` and the check fell through to `fail` instead of `skip`. **Fix:** new `NO_EXTERNAL_STORAGE_MODELS` frozenset in `utils/printer_models.py` enumerating A1, A1 Mini, and their internal codes (N1, N2S, A04, A11, A12), plus a `has_external_storage(model)` helper that returns False for those and True for everything else (unknown models default to True so the check stays active for any future Bambu model that ships *with* a slot — new no-slot models must be added to the set explicitly). The diagnostic now short-circuits to `skip` before reading `store_to_sdcard` when `printer.model` is in the set. **What this does NOT change:** X1 / X1E / P1S / P1P / P2S / H2D / H2D Pro / H2C / H2S / X2D continue to evaluate `store_to_sdcard` exactly as before — the home-flag-bit-off → `fail` path is still the right signal for them. **The companion FTP-upload-timeout symptom in the same bug report (ftp code 28 from BambuStudio when sending to the proxy VP) is a separate Docker-bridge-mode networking constraint, not addressed by this change.** **Tests:** 8 new cases — `TestHasExternalStorage` (5 cases) pins the model list, internal-code aliasing, case/whitespace normalisation, unknown-defaults-true, and null/empty-defaults-true; `TestExternalStorageCheck` gains `test_skips_on_a1_no_external_storage_slot`, `test_skips_on_a1_mini_no_external_storage_slot`, and `test_still_fails_on_x1c_when_toggle_off` (regression guard that the model-aware skip doesn't accidentally silence the genuine signal on slotted models). Full `test_printer_models.py` + `test_printer_diagnostic.py` + archives integration suite green (172/172); ruff clean.

- **AMS slot card surfaced the previous spool's preset name after RFID auto-assigned a new spool (reported with H2D-1 / AMS-B3 / PLA-CF showing as "Bambu PLA Silk+")** — Reporter inserted a fresh Bambu PLA-CF spool into AMS-B3, RFID identified it correctly, but the slot card kept showing "Bambu PLA Silk+" (the name from a PLA Silk+ spool that had occupied the slot back in March). Confirmed in the live data: `slot_preset_mappings` row for `(printer_id=1, ams_id=1, tray_id=2)` was `preset_id=GFSA06_09, preset_name='Bambu PLA Silk+', updated_at=2026-03-15` — three months stale. **Root cause:** `slot_preset_mappings.preset_name` is first in the PrintersPage display chain (`PrintersPage.tsx:3624`) and overrides the spool's own `slicer_filament_name` plus the cloud catalog `cloudInfo.name`. The internal-mode manual-assign path (`inventory.apply_spool_to_slot_via_mqtt`) kept this row in sync, but the internal-mode RFID auto-assign path (`spool_tag_matcher.auto_assign_spool`) skipped it entirely. The Spoolman-mode sync path (`main.auto_sync_spoolman_ams_trays`) also skipped it — same bug shape, latent for Spoolman users who'd never manually configured a slot preset, active for those who had. **Fix — three writers in lockstep via one shared helper.** New `backend/app/services/slot_preset_writer.py` exposes a primitive `upsert_slot_preset` plus two convenience wrappers: `upsert_slot_preset_for_spool` for internal `Spool` ORM objects (local-preset numeric ids → `local_{n}`, cloud ids run through `filament_id_to_setting_id`) and `upsert_slot_preset_for_spoolman_spool` for Spoolman dicts (filament.name → preset_name, tray_info_idx → preset_id). All three call sites — the manual-assign block in `inventory.py:396-438`, the RFID auto-assign tail in `spool_tag_matcher.py:auto_assign_spool`, and the per-tray-sync branch in `main.py:auto_sync_spoolman_ams_trays` — now go through the helper. **Self-heal:** existing stale rows from past spool swaps get rewritten the next time a fresh spool is detected on the same slot. No migration script needed. **What this also covers per `feedback_inventory_modes_parity`:** the bug shape exists in both internal and Spoolman modes, so the patch ships fixes for both inventory paths in the same drop — a Spoolman user with a manually-configured slot preset would have seen the same stale-name behavior after every RFID swap until the row was overwritten through Configure Slot. **Tests:** new `test_slot_preset_writer.py` (6 cases) pins the helper contracts — no-op on empty preset_id, upsert idempotency, Spoolman filament.name → preset_name, fallback to material → tray_sub_brands → tray_type, stale-row overwrite from the Spoolman path, skip when tray_info_idx is unknown. New `test_spool_tag_matcher.py` cases (3) pin the internal RFID-auto-assign path — stale-row overwrite (the exact reporter shape: PLA Silk+ → PLA-CF), fresh insert when no row exists, `local_{n}` formatting for numeric local-preset ids. Total touched-area suite 69/69 green; broader related suite (inventory + spoolman + spool_tag + auto_sync) 767/767 green; ruff clean.

- **Stats page Failure Analysis widget rendered raw camelCase keys instead of translated reasons (#1687 follow-up, reported by @IndividualGhost1905)** — After #1687 part 4 shipped the per-row Print Log editor, the reporter classified a couple of failed runs and saw "filamentRunout" / "cloggedNozzle" (the literal camelCase keys) appear under Statistics → Failure Analysis → Top Failure Reasons, while the same rows rendered correctly as "Filament runout" / "Clogged nozzle" on the Print Log table. Surfaced an inconsistency I introduced when shipping the new editor: the new Print Log row editor saves the camelCase key (`filamentRunout`) which is what the new backend PATCH validates against, but the older `EditArchiveModal` was still saving the localised label (`"Filament runout"`) as the value — two formats landing in the same `PrintLogEntry.failure_reason` column from two different UI surfaces. The Failure Analysis widget at `frontend/src/pages/StatsPage.tsx:817` and the per-archive run history sub-table at `frontend/src/components/PrintLogTable.tsx:81` both rendered the raw column value without running it through i18n, so the new key-form values surfaced as literal keys. **Fix — three sites in one drop:** (1) `StatsPage.tsx` and (2) `PrintLogTable.tsx` now wrap the value in `t('editArchive.failureReasons.${reason}', { defaultValue: reason })` — same pattern already used at `ArchivesPage.tsx:3874` for the Print Log table. The `defaultValue` fallback keeps legacy translated-text rows rendering as-is, no regression. (3) `EditArchiveModal.tsx` now saves the camelCase key (`<option value={reasonKey}>`) instead of the localised label, matching the new editor's wire format. On modal open, a reverse-lookup against the current locale resolves any legacy translated-text value back to its key so the dropdown pre-selects the right option — every save thereafter converts that row forward to the key format, so the data set self-heals over time without a migration script. Added `htmlFor`/`id` linkage to the failure-reason `<label>`/`<select>` pair as a side benefit (lets `getByLabelText` in tests reach the control, plus a small a11y improvement). **What this also fixes invisibly:** German / Japanese / Turkish users who classified rows under one UI language and then switched languages would have seen their historical buckets fragment in the Failure Analysis widget (each translation = its own group). With keys as the storage format, language switch no longer reclassifies anything. **Tests:** 5 new vitest cases — StatsPage `translates camelCase failure-reason keys` and `renders legacy translated-text failure reasons unchanged`; EditArchiveModal `preselects the option when the stored value is already a camelCase key`, `reverse-looks-up a legacy translated value back to its key`, and `sends the camelCase key on save, not the translated label`; PrintLogModal `translates camelCase failure_reason keys`. The existing `shows failure_reason under failed runs` case (which checks legacy text path) keeps passing under the defaultValue fallback. Full vitest 58 / 58 across touched files. ESLint clean; frontend build clean (vite 9.61s); i18n parity 5118 leaves × 11 locales green (no new keys — reuses `editArchive.failureReasons.*`).

- **System page boot time was rendered with a doubled timezone offset (#1690 follow-up, reported by @IndividualGhost1905)** — After the original #1690 fix landed in 0.2.4.6, the reporter on UTC+3 (Turkey) confirmed uptime was correct but boot time displayed +3 hours ahead of reality. **Root cause:** `backend/app/api/routes/system.py` built `boot_time` as a NAIVE LOCAL datetime via `datetime.fromtimestamp(psutil.Process(1).create_time())` and serialised it with `.isoformat()`, which emits no timezone marker (e.g. `"2026-06-09T11:22:05"`). The frontend's `parseUTCDate()` helper at `frontend/src/utils/date.ts:206` is documented to append `'Z'` when no tz marker is present, treating the string as UTC, then `toLocaleString` converts UTC → local — applying the local offset on top of an already-local timestamp. Uptime was unaffected because it's computed entirely backend-side as `datetime.now() - boot_time`, two naive-local values whose delta is correct regardless of the missing tz info. **Fix:** make both boot_time and the uptime anchor tz-aware UTC — `datetime.fromtimestamp(ts, tz=timezone.utc)` on the main path and the `psutil.boot_time()` fallback, and `datetime.now(timezone.utc)` in the uptime subtraction. `isoformat()` then emits `"+00:00"` and the frontend's parseUTCDate uses the marker as-is. Same naive-datetime pattern surfaced in two adjacent `generated_at` fields — the storage-usage cache snapshot in `system.py` and the support bundle root in `support.py`. Neither is rendered as a wall-clock timestamp in the frontend today, but both now emit tz-aware UTC for consistency so any future surface that does render them won't recreate this bug. **Tests:** new `test_boot_time_isoformat_carries_utc_marker` regression case asserts the boot_time string ends in `+00:00` (or `Z`) — without that marker the frontend double-converts, which is exactly the reporter's symptom. Existing `test_boot_time_uses_pid1_create_time` and `test_boot_time_falls_back_to_psutil_boot_time_on_pid1_failure` still pass under the tz-aware values because `1700345600` is `2023-11-18T20:53:20+00:00` UTC, so the date-prefix assertion is unaffected. Full system API suite 21/21 green; support API 72/72 green; ruff clean.

- **A1 / A1 Mini internal-code map was swapped in `PRINTER_MODEL_ID_MAP` (surfaced while scoping A2L support, #1684)** — `backend/app/utils/printer_models.py` mapped `N1 → "A1"` and `N2S → "A1 Mini"`, but every other registry that names these codes — `firmware_check.py` (`N2S → "a1"`), `virtual_printer/manager.py` (both the model map and the serial-prefix map: `N2S → "03900A"` is the A1's `039` prefix, `N1 → "03000A"` is the A1 Mini's `030`), `printer_manager.py` `A1_MODELS` — consistently uses the opposite (correct) direction. Any path that resolved an A1-family printer by internal code rather than serial prefix would silently misclassify. **Fix:** swap `PRINTER_MODEL_ID_MAP` to `N1 → "A1 Mini"`, `N2S → "A1"`; the matching comment in `LINEAR_RAIL_MODELS` was also wrong and got the same swap (the frozenset's contents don't change — both codes were already in it — so this is cosmetic, but kept the file self-consistent). New regression test class `TestA1SeriesModelIds` pins both directions so a future re-flip fails loudly. Functional impact in practice is small (most A1 detection runs off the serial prefix), but the inconsistency was a footgun for any future caller that trusted `normalize_printer_model_id`. Backend printer-model suite 46 / 46 green; ruff clean.

- **Print Queue filament-override panel showed raw 3MF base material instead of Bambu Studio's sub-brand colour name (#1718, reported by @SamNuttall)** — The Print Queue's filament-override panel rendered every "Original" row as `{type} ({colorName})` — just the raw 3MF `<filament type="...">` attribute, which is always the base material ("PLA", "PETG-HF") — plus the generic color-bucket name from `getColorName(hex)`. A model sliced with "Bambu PLA Matte Charcoal" therefore showed up as "PLA (Black)" in the dropdown's original-filament option, and the schedule dialog gave no way to confirm the user was actually overriding what they thought they were. The 3MF DOES carry the Bambu SKU (`tray_info_idx`, e.g. `GFA01`) on each `<filament>` element — `backend/app/api/routes/archives.py:3634/3665` already returns it in the `/archives/{id}/filament-requirements` response — but `FilamentReqsData` at `frontend/src/components/PrintModal/types.ts:178` didn't carry the field, so `FilamentOverride.tsx` couldn't see it. The resolution path was also already in place: `_BUILTIN_FILAMENT_NAMES` at `backend/app/api/routes/cloud.py:568` maps Bambu factory SKUs (`GFA01` → "Bambu PLA Matte"), exposed as `/cloud/builtin-filaments`; `/cloud/filament-id-map` returns the same shape for user custom presets (`P*` prefix). `KProfilesView.tsx:791` already merges those two for its own labels. **Fix:** add `tray_info_idx?: string` to the `FilamentReqsData.filaments` type. `FilamentOverride` now loads both maps via `useQuery(['builtin-filaments'])` + `useQuery(['filament-id-map'])` (both shared caches the rest of the app already populates, `staleTime: 5 min`) and merges them into a single `idx → name` lookup — user cloud preset names win over the builtin entries for the same id (the user-authored label is more specific). Both the dropdown's "original" placeholder option AND the swatch tooltip use the resolved name; the raw `req.type` stays as the fallback when the SKU is unknown to both sources so unknown ids degrade to today's behaviour instead of rendering blank. Color side note: Bambu Studio's specific color names ("Charcoal") live in their cloud catalog, not in the 3MF — the file carries only the hex — so Bambuddy still renders the color from `getColorName(hex)`. "Bambu PLA Matte (Black)" is the realistic best we can do; user-readable sub-brand IS now exposed. **Color disambiguation (round 2):** the sub-brand half above is necessary but not sufficient — `getColorName(hex)` resolved through `/api/inventory/colors/map`, which collapses every catalog entry sharing a hex to a single name via "Bambu Lab > is_default > first" priority. Hex `#000000` has 9 Bambu Lab catalog entries (Black for 8 materials, Charcoal for PLA Matte) all at the same priority, so "Black" — first encountered — wins the race and "Charcoal" is dropped before the frontend ever sees it. A new endpoint `GET /api/inventory/colors/by-material?hex=X&material=Y` (`backend/app/api/routes/inventory.py:get_color_by_material`) preserves the material context: same case-insensitive hex match as `/colors/map`, then a `material` filter on top. When no entry matches the requested material it falls back to the same priority order as `/colors/map`, so callers without a material hint (or with an unknown one) get exactly the existing answer — no regression for the flat-map consumers (PrintersPage, InventoryPage). `FilamentOverride.tsx` derives a material hint from the resolved sub-brand by stripping the leading brand token ("Bambu PLA Matte" → "PLA Matte", "PolyLite ABS" → "ABS"), dispatches one `useQuery` per slot via `useQueries` keyed on `(hex, material)`, and uses `data.color_name || getColorName(hex)` so a slow query never blanks out the placeholder. Five new tests in `test_color_catalog_extras.py` pin: same hex + different material returns the correctly-paired name; unknown material falls back to priority order; missing hex returns `color_name=null` (no 404); mixed-case input on both sides matches; invalid hex (<6 chars) returns null without crashing. Three new vitest cases pin: PLA Matte Charcoal scenario lands "Bambu PLA Matte (Charcoal)", per-slot disambiguation (regression guard so a Matte slot doesn't adopt a Basic slot's answer when both share a hex), null lookup falls back to `getColorName(hex)`. **Tests overall:** 20 `FilamentOverride.test.tsx` cases green; 12 `test_color_catalog_extras.py` integration cases green; combined PrintModal + FilamentOverride + FilamentMapping suite 79/79 green. **Same fix applies to printer-mode FilamentMapping (round 3):** the schedule modal's "Specific Printer" branch renders `FilamentMapping` instead of `FilamentOverride` and was reading the same raw fields (`item.type` + generic `getColorName(item.color)`) for the required-side row and the colour swatch tooltip — so a Charcoal slice opened against a specific printer still showed "Required: PLA - Black" while the model-mode branch already read "Bambu PLA Matte - Charcoal" against the same 3MF (caught when Sam's Specific-Printer screenshot still showed the old text after round 2 shipped). Extracted the three-query resolution machinery from `FilamentOverride.tsx` into a shared hook `useFilamentLabels` in `frontend/src/components/PrintModal/useFilamentLabels.ts` so the two panels can't drift on label content; `FilamentOverride` and `FilamentMapping` now both call `useFilamentLabels(filamentReqs?.filaments)` and read positional `{ resolvedName, colorLabel }` per slot. The hook also exports the `extractMaterialHint` helper so backend material-hint test parity is mechanical (one source of truth for "strip the leading brand token"). FilamentMapping's required-side type label now reads `{resolvedName}` instead of raw `{item.type}`, and the colour swatch tooltip reads `Required: {resolvedName} - {colorLabel}` instead of `Required: {item.type} - getColorName(item.color)`. New vitest case `renders sub-brand + material-disambiguated colour on the required side (#1718)` mirrors the FilamentOverride Charcoal scenario against FilamentMapping (msw stubs for builtin-filaments + by-material). Existing FTS dropdown-filter / force-color-match cases stay green. Hook itself gets direct unit coverage in a new `useFilamentLabels.test.tsx` (11 cases — extractMaterialHint corner cases, SKU resolution, cloud-over-builtin precedence, fallbacks, positional alignment across slots with same hex but different materials, and the `enabled: !!color` query gate). The earlier "case-insensitive on both inputs" backend test (in `test_color_catalog_extras.py`) is rewritten to actually seed an upper-case stored hex and query it with lower-case input — the original version only checked invalid-hex returns null, which is the wrong assertion for the test name. Combined PrintModal + FilamentOverride + FilamentMapping + useFilamentLabels + useFilamentMapping suite 144/144 green; eslint clean, build clean. **What this fix can NOT recover:** for hexes the catalog has no entry for (third-party filament manually loaded, etc.), the color label degrades to the existing HSL-bucket name from `getColorName(hex)` — still strictly better than blank, but Bambu's specific color names only live in the seeded catalog. Frontend + backend; no migration, no new i18n keys; ruff clean, eslint clean, frontend build clean, i18n parity unchanged.

### Removed
- **Slicer Bundle (.bbscfg) import (#1712, reported by @IndividualGhost1905)** — Bundle import never delivered what users expected. BambuStudio's "Export Preset Bundle" only includes user-customised presets; system processes / filaments are deliberately excluded by BS. So a fresh-install user who only used stock processes (the common case) got back a bundle containing their printer + maybe four custom filaments + zero processes. Importing that bundle into Bambuddy and then opening the SliceModal flipped into bundle mode — which constrained the dropdowns to bundle contents only — and surfaced "no presets" for process, blocking slicing on STL (3MF still worked because the embedded process JSON bypasses the dropdown). The first round of #1712 (`d459b6ea`, 2026-05-XX) addressed cross-tier visibility / dedup / banner behaviour but didn't touch the bundle-mode dropdown trap. Investigating the second round made it clear the bundle import wasn't unlocking anything the existing tiers don't already cover — custom presets reach Bambuddy through Bambu Cloud sync, Orca Cloud sync, or Single Preset Import; standard presets come from the sidecar's `/profiles/bundled` route automatically — so bundle mode was a fourth code path delivering no unique value while gating users on a slot they couldn't populate. **What was removed.** Backend: `POST/GET/DELETE /slicer/bundles*` routes, `SliceRequest.bundle` field + `SliceBundleSpec` schema, the bundle-dispatch fork in `library.py::_run_slicer_with_fallback` (cross-class slice-all loop, normal slice branch, `_resolve_target_printer_model` short-circuit), the bundle-context query params on `GET /library/files/{id}/filament-requirements` and `GET /archives/{id}/filament-requirements`, the bundle-fingerprint key in `slice_preview.py`'s LRU cache (back to `(kind, source_id, plate_id, content_hash)`), `SlicerApiService.import_bundle/list_bundles/get_bundle/delete_bundle/slice_with_bundle`, the `BundleSummary` / `BundleNotFoundError` types. Frontend: `BundlePicker` + `BundleStringDropdown` components, `isBundleMode` state and every branch on it in `SliceModal.tsx`, `selectedBundleId` / `bundleProcessName` / `bundleFilamentNames` state, the bundle-mode auto-pick effect, the bundle dispatch shape in `buildSliceBody`, the `bundlesQuery` itself, `SlicerBundle` / `SliceBundleSpec` types, `listSlicerBundles` / `importSlicerBundle` / `deleteSlicerBundle` API methods. The bundle-derived path in `buildCompatibilityIndex` is also gone — the function now only takes the printer-model registry and returns `{bambuModelByShortCode}`. `presetCompatibility` keeps its two remaining paths: the slicer's own `compatible_printers` list on local-imported presets (authoritative when set) and the `@BBL <code>` name-based fallback against the printer-model registry. Tests: `TestBundleRoutes` / `TestBundleClientMethods` / `TestSliceWithBundle` / `TestBundleAwarePreview` / `TestBundleDispatchShape` classes deleted across `test_slicer_presets.py` / `test_slicer_api.py` / `test_slice_preview.py` / `test_slice_request_schema.py` / `test_library_slice_api.py`; the SliceModal's "Bundle tier" describe block and the bundle-only assertions in `slicerPrinterMatch.test.ts` deleted; `SlicerBundlesPanel.test.tsx` removed; `TestNozzleClassGuard` simplified (no more bundle vs preset request distinction). **What replaces the Settings panel.** `SlicerBundlesPanel` is kept under the same name and slot in `SettingsPage` but now renders a static notice (title: "Slicer Bundles (removed)") explaining the removal and pointing users at Single Preset Import / Bambu Cloud / Orca Cloud, with the slicer sidecar covering stock presets automatically. The notice is permanent and can be removed in a future cleanup. **i18n.** `settings.slicerBundles.*` block replaced with `settings.slicerBundlesRemoved.{title,description,alternatives}` translated across all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW) per `feedback_translate_dont_fallback`. `slice.bundle` / `slice.bundleNone` / `slice.bundleAllRequired` keys removed across all locales. Parity check 5106 leaves × 11 locales green. **Migration.** Hard cutover, no automatic preset migration. Users who previously imported bundles will see them disappear from Settings → Slicer Bundles after this drops; their printer preset still lives on the sidecar bundle store but is no longer surfaced. Standard presets from the sidecar's BBL tree cover stock slicing; users who need their customs re-upload them via Single Preset Import or sync via Bambu Cloud / Orca Cloud. **Why this resolves #1712.** shaddowlink's failing path was: import bundle for H2D → bundle has 0 processes (BS-side limitation) → SliceModal flips into bundle mode → process dropdown empty → can't slice STL. Post-removal: same import isn't possible, but the cross-tier preset picker shows H2D processes from the sidecar's standard tier (which always had them — bundle mode was the thing hiding them), filtered by `@BBL H2D` compatibility. STL slicing works without any user action. **Tests:** full backend suite 5907/5907 green; ruff clean; frontend ESLint clean; `npm run build` clean; vitest 158 files / 2118 tests green; i18n parity 5106 leaves × 11 locales green.

## [0.2.4.6] - 2026-06-09

### Added
- **Archives page banner: reactive install-step-4 nudge for the slicer-side setting** — Companion to the new `external_storage` diagnostic check. The diagnostic catches the printer-side variant of "Store sent files on external storage" via `home_flag` bit 11. The slicer-side variant on older BambuStudio / OrcaSlicer never reaches the printer, so the diagnostic passes even when the option is off in the slicer. The deterministic symptom is the archiver creating a row with `extra_data.no_3mf_available=True` (`main.py:2770`) — that's the signal this banner watches. New backend endpoint `GET /archives/no-3mf-warning` returns `{has_fallback: bool}` — true iff any archive in the last 30 days has the flag set AND isn't soft-deleted. The 30-day window prevents old never-fixed installs from showing the banner forever; the soft-delete filter respects the user clearing the evidence. Frontend banner sits at the top of the Archives page (amber, dismissible) — "Some recent prints couldn't be archived with thumbnails…" + link to install step 4 in the wiki. Dismissal is one-shot via `localStorage` key `archiveNo3MFWarningDismissed` (matches the existing `Layout.tsx` update-banner pattern but persistent across sessions, since "you've been told" should outlive a browser restart). React-Query is `enabled: !dismissed` so the endpoint isn't polled after dismissal. 5 backend integration tests (`TestNo3MFWarning`) cover: recent fallback returns true, no archives returns false, archives without the flag returns false, >30-day-old fallbacks ignored, soft-deleted fallbacks ignored. i18n: 4 new keys (`title`, `body`, `docsLink`, `dismissLabel`) under `archives.no3mfBanner` translated to all 11 locales — no English fallbacks.

- **Connection diagnostic now verifies install step 4 ("Store sent files on external storage")** — Many users miss this setting when adding their first printer; without it BambuStudio / OrcaSlicer never leave a `.gcode.3mf` on the printer's SD card, every archived print falls back to no-thumbnail / no-metadata, and the cause is invisible until the user notices the archive is empty. **The trap with detecting this**: on newer firmware (P2S 01.02 / Bambu Studio 2.6+) the toggle moved onto the printer itself and is pushed on MQTT `home_flag` bit 11 (Bambuddy already parses this into `state.store_to_sdcard`). On older versions it's a purely slicer-side preference invisible to the printer. An FTP upload-probe approach was tried first — it always passed regardless of the slicer toggle because the `/cache` directory is always writable from Bambuddy's perspective; the slicer toggle only controls what BambuStudio chooses to do, not what the printer accepts from other clients. Confirmed empirically against an X1C + H2D with the slicer option toggled off (probe still succeeded, `home_flag` bit 11 stayed True). **Fix**: new `external_storage` check reads `state.store_to_sdcard` directly. Pass when the printer reports the bit on, fail when off, skip when no live MQTT state or the field has never been populated (older firmware that doesn't push `home_flag`). Localised fix-text points at install step 4 with both the printer-side and slicer-side variants spelled out; the `skip` text explicitly calls out the older-slicer limitation so users on that path know to verify manually. Slot in the check list sits between `port_ftps` and `mqtt_auth`. 5 new tests (`TestExternalStorageCheck`) cover pass-on-true, fail-on-false, skip-on-disconnect, skip-on-pre-add (no state), skip-on-missing-field. The reactive symptom-side detection — a one-time banner the first time the archiver records `extra_data.no_3mf_available=True` after a slicer-initiated print — is planned as a separate follow-up to cover the slicer-only setting case. Wiki updated on the System page (`features/system-info.md`) and the Troubleshooting page (`reference/troubleshooting.md`). i18n: 4 new keys (title, pass, fail, skip) localised to all 11 locales (de, en, es, fr, it, ja, ko, pt-BR, tr, zh-CN, zh-TW) — no English fallbacks.

- **"Open in Slicer" desktop target is now configurable separately from the API sidecar slicer (#1329, reported by @hasmar04)** — Reporter wanted to slice via the Bambu Studio sidecar but open files locally in OrcaSlicer; the existing `preferred_slicer` setting drove both, so picking one forced the other. The slicer-URI flow on Workflow → Slicer literally swapped the BambuStudio handler for the OrcaSlicer one whenever the user switched the API choice. **Fix: new `open_in_slicer` setting** (`'bambu_studio' | 'orcaslicer' | null`) drives only the desktop "Open in Slicer" URI handoff; the in-app SliceModal + sidecar URL routing in `library.py`, `archives.py`, `slicer_presets.py` continue to use `preferred_slicer` exactly as before. Default is `null` — the frontend falls back to `preferred_slicer` so existing installs behave identically until a user changes it (no migration, no churn). **Storage** lives in the existing `app_settings` key/value table; the PUT path serialises a Python None as the literal string `"None"`, and the GET path normalises it back via a new branch in `_build_settings_response` matching the existing `default_printer_id` convention — without that normalization the frontend can't tell "explicit override absent" from "explicit override set to a bogus value". **Frontend**: Settings → Slicer card relabels the existing dropdown's description ("Slicer used for in-app slicing via the API sidecar"), adds a new "Open in Slicer" dropdown below it with three options — "Same as API slicer" (the inherit-from-preferred default), "Bambu Studio", "OrcaSlicer". `ArchivesPage` (5 `openInSlicerWithToken` call sites), `MakerworldPage` (the URI handoff branch when `useSlicerApi=false`), and `ModelViewerModal` (4 `openInSlicer(...)` call sites) all switched from reading `settings?.preferred_slicer` to `settings?.open_in_slicer ?? settings?.preferred_slicer`. MakerworldPage's "Slice in {{slicer}}" button label additionally branches on `useSlicerApi`: when on, the label reflects the API slicer; when off, the desktop slicer — so the button text always matches what the button actually does. The OrcaSlicer "known CLI bugs" warning stays attached to the API dropdown (where it belongs — it's about the sidecar's CLI). **i18n**: 3 new keys in all 11 locales (de/en/es/fr/it/ja/ko/pt-BR/tr/zh-CN/zh-TW) — `settings.openInSlicerLabel`, `settings.openInSlicerInherit`, `settings.openInSlicerDescription` — plus an updated `settings.preferredSlicerDescription` everywhere (the old wording "Choose which slicer application to open files with" became wrong once the field stopped driving the desktop handoff). No English fallbacks per the project's hard rule. **Tests**: 3 new in `TestOpenInSlicerOverride` pin the contract — default is null, override persists across GET, explicit reset to null round-trips correctly without leaving the `"None"` string leak. Full backend suite green (5798/5798); frontend ESLint + build clean; vitest on SettingsPage + MakerworldPage 48/48 green; i18n parity 5095 leaves × 11 locales green.

- **Queue items + Print modal now show the build plate type, per-plate accurate (#1281, reported by @CMW-ISS)** — Reporter on a multi-printer farm with 40+-plate runs needed to walk to the printer with the right physical plate; the archive card had recently grown a bed-type badge, but the queue and the scheduling modal didn't. They were having to open the source 3MF in the slicer to look up which plate each queued / scheduled job needs. **Backend**: new `extract_bed_type_from_3mf(file_path, plate_id)` helper in `utils/threemf_tools.py`, alongside the existing `extract_filament_usage_from_3mf` shape — reads `Metadata/slice_info.config`, finds the `<plate>` with the matching `index`, returns its `curr_bed_type`. When `plate_id` is None it returns the first plate's value (matches the archive-level capture convention). `PrintQueueItemResponse` gains a `bed_type: str | None` field; `_enrich_response` populates it from `archive.bed_type` / `library_file.file_metadata["bed_type"]` as the file-level default, then overrides per-plate via the new helper when `item.plate_id` is set. This matters because `archive.bed_type` is captured at ingest as the FIRST plate's value only (see `services/archive.py:235`) — a 40-plate 3MF mixing PEI + Engineering returns "PEI" for every plate at the archive level, even though the user's plate 17 actually needs Engineering. The per-plate override re-reads the 3MF and returns the truth. **`/archives/{id}/plates`** (and the library-file equivalent) now include `bed_type` in each plate object so the PrintModal's plate selector can render the badge inline. **Frontend**: queue card meta row gains a bed badge after filament weight — uses the existing `getBedTypeInfo(bed_type)` helper from `utils/bedType.ts` (the same one the archive card uses, so all 11 canonical bed labels + icons are covered including the BambuStudio / OrcaSlicer spelling drift). PrintModal's per-plate `PlateSelector` shows the bed badge under each plate's filament line; the modal header carries a bed badge for the selected (or sole) plate, surfaced before the user hits Schedule. `PlateInfo` + `PlateMetadata` types both get an optional `bed_type` field. No new i18n keys needed — `getBedTypeInfo` returns the canonical English plate name as the human label, matching the archive card's existing convention. **Tests**: 8 new unit cases in `test_threemf_tools.py::TestExtractBedTypeFrom3mf` pin the helper (single-plate, multi-plate per-plate, no-plate-id defaults to first, unknown-plate-id → None, plate-without-bed-type → None (no fall-through to another plate's value), missing slice_info, invalid file, whitespace trim). Full backend suite green (3848/3848); frontend build clean; ESLint clean; vitest on touched pages 81/81; i18n parity 5092 leaves × 11 locales green.

- **Print Log page: per-row failure-cause classification (#1687 part 4, reported by @IndividualGhost1905)** — Reporter clarified after part 1 shipped that what he actually wanted for point 2 was failure-cause grouping on the *log* (spaghetti, jam, bed-adhesion, etc.), not the archive tags I'd pointed him at. Archive `tags` describe the model (home decor, toys); the log row needs to describe what went wrong on a single print event. Different surface, different lifetime. **What was already there:** `PrintLogEntry.failure_reason: String(100)` already exists, gets *mirrored* from `archive.failure_reason` when the user edits the archive (see `archives.py:1421` for the mirror that ships with #1444), and the Failure Analysis widget already groups by it. So the storage and the aggregation were both done — the only gaps were (a) the Print Log table couldn't *render* the value because the GET serialiser silently dropped it from `PrintLogEntrySchema`, and (b) **orphan log entries** (failures with no archive — dispatch errors, aborts before archive creation, manual entries) had no edit path at all because the Archive Edit modal can't reach them. **Fix:** four pieces. (1) `print_log.py` GET endpoint now includes `failure_reason` (and `archive_id`, `created_by_id`) in the serialised response — pre-fix it was silently None in every response even when the column was populated. Regression guard added. (2) New `PATCH /print-log/{entry_id}` endpoint accepting `{failure_reason, status}`, gated on `require_ownership_permission(ARCHIVES_UPDATE_ALL, ARCHIVES_UPDATE_OWN)` — same ownership shape as the per-row delete that already shipped. Backend validates `failure_reason` against the same canonical vocabulary the Archive Edit modal uses (11 enumerated keys + empty-string-clears + the `other` catch-all); unknown values return 400 rather than getting stored as raw garbage (the i18n layer renders the value as a key, so an unrecognised one would surface as a literal string in the UI). Status validated against the 5-value `{completed, failed, stopped, cancelled, skipped}` set. Empty-string `failure_reason` stores back as NULL so the column's `nullable=True` intent is preserved end-to-end. (3) `FAILURE_REASON_KEYS` constant moved to an export from `EditArchiveModal.tsx` so the new editor reuses the exact same vocabulary as the archive editor — backend and frontend stay in lockstep. (4) Frontend: pencil icon added beside the existing trash icon on every Print Log row, gated on `archives:update_own`/`archives:update_all`. Click opens a compact two-field modal (status + failure reason dropdowns). Save invalidates both `print-log` and `archives-stats` query keys so the Failure Analysis widget reflects the re-classification on the same response cycle. Failure reason is also rendered as a sub-label under the status badge in the table, mirroring the per-archive `PrintLogTable.tsx` convention so the two views agree. **i18n:** 10 new keys (`editEntryTitle`, `editEntryDescription`, `entryUpdated`, `entryUpdateFailed`, `archives.permission.noEdit`, plus a 5-key `statuses` block) translated across all 11 locales — no English fallbacks per `feedback_translate_dont_fallback`. **Tests:** 8 new backend integration cases — GET surfaces `failure_reason` (regression guard for the silent-drop bug), PATCH sets / clears / rejects unknown failure_reason, PATCH updates status, PATCH rejects unknown status, PATCH returns 404 on missing ID, PATCH works on **orphan entries** (archive_id IS NULL) — the actual reason this endpoint exists. Full backend suite 5843/5843 green; ruff clean. Frontend vitest 2108/2108 green; ESLint + build clean. i18n parity check 5110 leaves × 11 locales green.

- **Print Log page: per-row delete (#1687 part 1, reported by @IndividualGhost1905)** — Reporter noted that the existing "Also remove this print from Quick Stats" toggle on archive delete is one-shot: if you tick "keep stats" at delete time, there was no later way to drop the row from /stats; and rows that aren't tied to an archive (errors, aborts, manual entries) had no delete affordance at all. **Fix:** every row in the Archives → Print Log table now has a trash icon next to the filament cell, gated on `archives:delete_own` (own rows) or `archives:delete_all` (any row), matching the archive-delete permission shape. Click → confirm modal → row is gone, and because /archives/stats aggregates over `PrintLogEntry` the filament / time / cost contribution drops out of Quick Stats in the same response cycle. The matching archive (if any) is untouched — the log row is a sibling, not a child. **Backend:** new `DELETE /print-log/{entry_id}` mirrors `delete_archive`'s ownership flow via `require_ownership_permission(ARCHIVES_DELETE_ALL, ARCHIVES_DELETE_OWN)`; owners can drop their own rows, admins can drop any row, missing IDs return 404 rather than 200-silently. **Frontend:** new `deletePrintLogEntry` API helper, per-row mutation that invalidates both `print-log` and `archives-stats` query keys so the totals re-render without a manual refresh. **i18n:** 4 new keys (`deleteEntryTitle`, `deleteEntryConfirm`, `entryDeleted`, `entryDeleteFailed`) translated across all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW). **Tests:** 3 backend integration cases — delete drops the row from /stats while keeping the linked archive listed, missing ID returns 404, delete-one does not touch siblings (regression guard against an accidental `delete(PrintLogEntry)` without a `where`). Frontend ArchivesPage / PrintLogModal vitests stay green (31 / 31). i18n parity green (5099 leaves × 11 locales). Issue #1687 also asks for per-row tagging (already covered by `EditArchiveModal`'s tags field) and per-row filament-usage-history edits (deferred — see the issue thread for the reasoning).

- **Inventory page now supports native CSV import / export (#1576, PR #1659 by @samedyuksel)** — Bulk-add spools without manually clicking through the form, and back up / migrate the local inventory in a single round-trip. Export downloads `bambuddy-spools-YYYY-MM-DD.csv` (header + one row per active spool); Import shows a preview table that classifies each row as valid / error / skipped before anything hits the database, then a confirm click persists only the valid rows in one transaction (invalid rows are skipped, the user fixes them and re-uploads). Local inventory only — in Spoolman mode the buttons render disabled with a tooltip pointing at Spoolman's own CSV import/export, since the Spoolman backend has its own data store. **Schema**: fixed 18 columns, case- and whitespace-tolerant headers, includes `weight_used`, `last_used`, and the SpoolCreate fields `storage_location` / `category` / `low_stock_threshold_pct` so the round-trip preserves the per-spool location data from #1291. `remaining` is a derived, export-only column (`label_weight - weight_used`, clamped at 0) — it's written for human readability and ignored on import (weight_used is the source of truth, accepting both would let them contradict). **Colour resolution**: explicit `rgba` wins, otherwise `brand + color_name` resolves against the Color Catalog (case-insensitive, single in-memory pass — no N+1); a catalog entry with `material = NULL` is treated as the project's "matches any material" convention so a generic match counts as exact rather than firing the cross-material warning. Validation reuses `SpoolCreate` so every constraint that already protects manual adds (`weight_used >= 0`, `weight_used <= label_weight`, `low_stock_threshold_pct` range, etc.) protects bulk imports too. **Hardening**: 5 MB upload cap with a structured `csv_import_too_large` 413 response — Bambuddy doesn't have a global HTTP-level cap so the check lives on the route, and the implementation is a bounded 64 KB chunked read that bails the moment the accumulated body crosses the cap (file.size is `None` for chunked uploads so the loop is what actually prevents the OOM, not the pre-check). Spreadsheet formula-injection guard: every exported cell starting with `=` / `+` / `-` / `@` / tab / CR is prefixed with a single quote on export, and the inverse strip on import keeps the round-trip lossless instead of accumulating quotes on every cycle. Soft-warn surface in the preview: a `duplicate_of_existing` flag fires when an active spool with the same material + brand + color_name exists (single SELECT, no N+1) so a double-click or re-upload of the same CSV doesn't silently duplicate the inventory — the row still imports (Spool has no unique constraint, by design), but the preview renders a Copy icon + tooltip so the user knows. **Frontend**: new `SpoolCsvImportModal` (file pick → preview table with per-row status / colour swatch / warnings → confirm imports valid rows) wired to Import + Export buttons on the inventory header; swatch rendering uses the existing `getSwatchStyle` helper so alpha=00 shows the checkerboard underlay instead of rendering as solid black, matching the rest of the inventory surface. **i18n**: new `inventory.csv` namespace with full translations in all 11 locales (de/en/es/fr/it/ja/ko/pt-BR/tr/zh-CN/zh-TW). **Tests**: 25 backend integration cases pin every behaviour — export shape, import dry-run vs real, color resolution (catalog hit, explicit rgba wins, cross-material flagged, exact-material match, generic-material match not flagged), 5 MB rejection, weight_used bounds, formula-injection round-trip without quote accumulation, dated filename, extra-column round-trip, duplicate-warn flag. Plus 3 frontend modal tests. Full backend suite + ruff + ESLint + frontend build + i18n parity (5092 leaves × 11 locales) green. **Companion docs**: wiki PR maziggy/bambuddy-wiki#41 documents the schema, behaviour, and the Spoolman-mode disabled-with-tooltip semantics.

- **Add Printer: scan a custom subnet for printers behind a router on a different L3 segment (#1564, reported by @MartinNYHC, root-caused by @IndividualGhost1905)** — Reporter on a flat LAN couldn't add a printer that lived in a different subnet (`Bambuddy 192.168.1.0/24` ↔ `printer 10.1.1.0/24`). SSDP multicast (`239.255.255.250:2021`) doesn't traverse routers, so the existing "Discover Printers on Network" pass found nothing; Docker mode had a CIDR text input but only as a fallback when zero interface subnets were detected, and native mode had no subnet field at all. The discovery socket has always bound `INADDR_ANY` so this was never an interface-bind issue — only a routing-boundary one. The fix surfaces an always-visible subnet picker in `AddPrinterModal`: the detected interface subnets stay as the dropdown options, plus a new "Custom subnet..." sentinel reveals a CIDR text input the user can type any reachable subnet into (`10.1.1.0/24`, a VLAN, a Tailscale subnet route, etc.). When custom is picked, the discovery routes through `POST /discovery/scan` with the typed CIDR instead of `POST /discovery/start` — SSDP would no-op against a foreign subnet anyway, so this is the only behaviour that can succeed. The Scan-button label and the scanning / no-printers-found messages all key off the `(isDocker || useCustomSubnet)` predicate so the wording stays "Scan Subnet…" / "Scanning subnet…" — the user sees one consistent verbal model whether they're on Docker or just picked Custom. Last custom CIDR is persisted to `localStorage` under `bambuddy.discovery.customSubnet` and restored on next modal open, so a user who maintains a VLAN setup doesn't retype `10.1.1.0/24` every time. **Backend changes: none.** `SubnetScanner.scan_subnet()` already accepts any CIDR, already caps the scan at /22 (1024 hosts) with batch-50 concurrency, and the route `/discovery/scan` already takes user-supplied input — the existing plumbing was complete. **i18n**: 3 new keys (`customSubnetOption`, `customSubnetLabel`, `customSubnetNote`) translated in all 10 non-English locales (de/es/fr/it/ja/ko/pt-BR/tr/zh-CN/zh-TW), no English fallbacks per the project's hard rule. The note text spells out the routing-boundary requirement: "The FTP (990) and MQTT (8883) ports must be reachable across the routing boundary" — a user who can pick a subnet but whose firewall blocks 8883 will at least see why the scan came up empty. **Tests**: 3 new in `PrintersPageDiscoveryCustomSubnet.test.tsx` — picker renders on native installs (was Docker-gated before), picking Custom + entering a CIDR routes through `discoveryApi.startSubnetScan` not `startDiscovery` and persists the choice via `localStorage.setItem`, picker default (the detected interface subnet) still triggers SSDP via `startDiscovery`. `AddPrinterModal` exported from `PrintersPage.tsx` so the tests can mount it directly without round-tripping through the full page (same shape as `ProjectModal` for the #1642 tests).

- **Orca Cloud profile sync — end-to-end integration with the slicer + SpoolBuddy surfaces (OrcaSlicer/OrcaSlicer#14028 filed for upstream allowlist broadening)** — Bambuddy now reads, lists, and slices with profiles from your Orca Cloud account alongside the existing Bambu Cloud integration. OrcaSlicer 2.4.0-alpha shipped its own cloud (Supabase-backed at `auth.orcaslicer.com` / `api.orcaslicer.com`); this integrates with it using the in-source publishable client key, a standard PKCE handshake, and the `/api/v1/sync/pull` profile-sync endpoint. **Four sign-in providers**: Google, Apple, GitHub (paste-flow PKCE) and email+password (direct grant — Orca's web sign-in offers it even though their desktop SDK refuses); UI defaults to password with the three OAuth options listed below. **UX shape**: the Cloud Profiles tab is now two — "Bambu Cloud" (existing, unchanged) and "Orca Cloud" (new); the paste flow's "page will fail to load — that's expected" instruction is rendered as a prominent amber callout so the connection-refused page isn't mistaken for a Bambuddy error. The Orca Cloud tab renders the same rich profile-browser layout as Bambu Cloud (search + 5 filter dropdowns + 3-column grouped grid + click-to-detail) via a parallel `OrcaCloudProfilesView` component. We chose paste-flow rather than a clean OAuth callback because Orca's Supabase project only honors localhost in its `redirect_to` allowlist. **Slicer integration**: the unified-presets endpoint surfaces Orca Cloud as a 4th tier above Bambu Cloud > local > standard; `_dedupe_by_name` and the SliceModal dropdowns both updated to walk all 4 tiers. The dedicated `_fetch_orca_cloud_presets` extracts `filament_type` and `default_filament_colour` inline from each profile's content (cheap because `/sync/pull` returns full content per profile — no rate-limit dance like Bambu Cloud's per-setting fetch), so multi-color pre-pick scoring works against Orca presets too. A separate `CloudStatusBanner` instance shows Orca Cloud's auth status independently of Bambu's. **AMS slot integration**: `ConfigureAmsSlotModal` accepts `orca_cloud` as a new preset source (prefixed `orca_<UUID>` to match the existing `local_*` / `builtin_*` convention), gracefully tolerating raw UUIDs from historical saves; Orca presets are treated like local imports for `tray_info_idx` derivation (no Bambu setting_id, generic filament-ID map by parsed material). Slot mapping persisted with `preset_source='orca_cloud'`. **SpoolBuddy integration**: `SpoolFormModal` and `SpoolBuddyWriteTagPage` fetch Bambu + Orca filaments in parallel via `Promise.allSettled` and concat; `ConfigureAmsSlotModal` opens from `SpoolBuddyAmsPage`'s Configure flow with Orca presets surfaced first. **Storage**: 8 new columns on `users` (5 persistent + 3 transient PKCE state with 10-min TTL), dialect-branched DATETIME / TIMESTAMP, verified on SQLite and Postgres. Auth-disabled mode falls back to global Settings table. **Refresh rotation**: Supabase issues single-use refresh tokens; service refreshes just-in-time (<5min leeway) and persists the new pair BEFORE the downstream call so a mid-flight crash doesn't strand the user. **Cloudflare**: `api.orcaslicer.com` is behind a UA-only gate; `Bambuddy/<version>` clears it (no TLS-fingerprint games). Per the [[bambu-compliance-outreach]] posture we identify honestly. **Preset resolver**: `PresetRef.source` extended to `'orca_cloud' | 'cloud' | 'local' | 'standard'`; `_resolve_orca_cloud` lists, filters, and forwards profile content. **Permissions**: new explicit `orca_cloud:auth` flag (per [[feedback_specific_scopes_over_folding]]); folded into the existing `can_access_cloud` API-key scope (same trust dimension as Bambu Cloud — extending automatically rather than requiring a per-key opt-in). The orca_cloud router carries the same `_cloud_api_key_gate` + `cloud_caller()` deps as the Bambu Cloud router — a copy-paste miss caught only when the SpoolBuddy kiosk's API-keyed requests came back with empty preset lists from `/orca-cloud/profiles` because the plain `require_permission_if_auth_enabled` dep returns `None` for API-key callers, falling through to the global Settings table that doesn't carry per-user Orca tokens. **Load-bearing gotchas surfaced and fixed during the build** (captured in the `orca-cloud-integration` project-memory file so future contributors don't re-discover them): (a) Supabase silently falls back to the project Site URL when a client passes its own `state` to `/auth/v1/authorize` — overrides GoTrue's internal redirect_to tracking, browser lands at cloud.orcaslicer.com instead of localhost; we don't send state, PKCE alone gives CSRF protection. (b) `cursor=0` returns `410 cursor_too_old`; bare `/sync/pull` with no cursor parameter is the first-sync bootstrap, same as Orca's own client. (c) The `/api/v1/sync/profiles` constant is declared in source but isn't deployed — returns 404. (d) Orca's `content.type` vocabulary is `printer` / `print` / `filament`, not the BambuStudio `machine` / `process` / `filament` triplet you'd guess from the wider source; without alias mapping every printer + process profile gets silently dropped (caught against a real account showing 54 filament + 0 process + 0 printer instead of 54+18+3). (e) Naive datetimes from Postgres `TIMESTAMP WITHOUT TIME ZONE` columns get `.astimezone()` interpreted as local time on the read path, shifting freshly-stored pending PKCE state by the host's TZ offset and instant-firing the 10-min TTL — `_as_utc` normalises on load. **Tests**: 32 unit tests on the OrcaCloudService (PKCE / token exchange / single-use refresh rotation / rejected-refresh-clears-tokens / JIT refresh / profile walk + content.type mapping); 6 preset-resolver orca tier tests (permission gate, content unwrap, auth error 401, not-found 400, dispatcher routing); 6 new orca-fetch tests in test_slicer_presets.py paralleling the Bambu Cloud fetcher (status vocabulary, permission shortcut, cache hit, type vocabulary); existing SliceModal vitest updated for the 4-tier shape; 6 frontend OrcaCloudView tests (all four sign-in providers + paste flow + connected + disconnect). **i18n**: ~35 new keys translated in all 10 non-English locales (de/es/fr/it/ja/ko/pt-BR/tr/zh-CN/zh-TW); brand-name "Bambu Cloud" / "Orca Cloud" cognates allowlisted in the parity check; existing `tier.cloud` relabelled from "Cloud" to "Bambu Cloud" everywhere it was previously generic. **Service worker**: bumped to v29/v28 with a forced reload-on-activate so the SpoolBuddy kiosk (Pi + Chromium + locked into kiosk mode, no devtools, no way to navigate or refresh) picks up the new bundle on a single restart instead of needing two. **Verified**: backend ruff clean; full pytest pass at 5648 across the suite (-n 30 in 84s); frontend eslint + build + vitest 2051 clean; i18n parity green at 5054 leaves × 11 locales.

- **VP MQTT bridge surfaces why `net.info[].ip` rewrite didn't arm (#1429 defensive)** — `MQTTBridge._refresh_ip_encoding` had 4 silent early-return paths (`target_client is None`, `printer client has no ip_address yet`, `no host interface shares a subnet with printer IP X and bind_address is 0.0.0.0/empty`, `invalid IPv4 …`). When the rewrite silently no-op'd on a user's setup, the only signal was the absence of the `MQTT bridge IP encoding armed` INFO line — diagnosing which path was firing meant grepping the source. Each path now emits one `MQTT bridge IP encoding NOT armed: <specific reason>` INFO line; the message names the actual failure (target IP, the missing-interface case, etc.). Throttled via a `_not_armed_reason` dedup field so an idle unarmed bridge doesn't spam one line per 30s refresh tick — only state changes log. Cleared on successful arm so a regression (e.g. printer client unbinds) re-emits the diagnostic. 5 new tests in `TestNotArmedDiagnosticLogging` pin each path's specific reason text, the once-per-state-change throttle, and the arm-clears-dedup behaviour. **Not a fix for #1429 itself** — the bridge logic is unchanged; this just turns the silent failure into visible signal so the next "fix didn't work for me" report can be triaged in one round-trip instead of multiple.

- **Connection diagnostic now verifies the printer is actually publishing on its report topic (#1622)** — The existing checks proved TCP + TLS + auth + SUBSCRIBE, but a printer with a wrong-cased serial — or one that simply isn't publishing for some other reason — would still pass `mqtt_auth` because the broker accepts the subscription regardless. The user-visible symptom in that case was "AMS / K-profiles / custom filaments missing on the slicer side": the VP bridge had nothing cached to mirror because no reports ever arrived. Bambuddy already logged `Connected and subscribed, but the printer has sent zero status reports. The most common cause is a wrong or mis-cased serial number…` at `bambu_mqtt.py:498` when this happened, but the only way to see it was to grep container logs. New `printer_publishing` check turns that warning into a structured diagnostic result. Pass = the bridge has seen at least one report since the latest (re)connect; fail = zero reports across the wait window with a fix-text pointing at the case-sensitive serial. The check exposes `report_messages_since_connect` as a public property on `BambuMQTTClient` so the diagnostic doesn't reach into private state. **Bounded wait with countdown UX**: the bridge resets the counter to 0 on every (re)connect, so a fresh reconnect would otherwise be reported as fail before the printer's first idle push lands. The on-demand UI check polls for up to 10s (`PUBLISH_WAIT_DEFAULT`) at 0.5s intervals and exits the moment a message arrives — typical wall-clock is 1-2s, not the full 10. The check returns `max_wait_seconds` in its `params` so the frontend can render a countdown next to the spinner instead of looking hung. The Connection Diagnostic modal (`ConnectionDiagnostic.tsx`) now displays an elapsed-seconds counter (`Running diagnostic... (3s)`) plus the `waitingForReportHint` line (`Listening for the printer to publish a status report — this can take up to 10 seconds.`) during the pending state for the existing-printer flow. `PUBLISH_WAIT_DEFAULT_SECONDS = 10` is pinned in the frontend to match the backend constant; the 2 new i18n keys ship in all 11 locales. The support-package gathering path stays fast: it calls `run_connection_diagnostic` without `wait_for_publish_seconds`, getting an instant pass/fail with no `max_wait_seconds` exposed. 6 new tests covering pass-on-reports-seen, fail-on-zero-after-wait, skip-on-disconnect, skip-on-missing-client, instant-no-wait-path, plus updated all-healthy + disconnected-state assertions to include the new check. i18n strings (`title` / `pass` / `fail` / `skip`) shipped in all 10 non-English locales with real translations — no English fallbacks per the project's hard rule. 5011 leaves × 11 locales in parity. **Why this directly closes #1622**: the reporter's bridge to printers 2 + 4 (P1S + A1 Mini real targets) repeatedly hit keep-alive timeouts and force-reconnected; on every reconnect the printer published nothing in the stale window, leaving the VP cached state empty. The slicer Device tab pulls AMS / cali_id / custom filaments from cached state — empty cache = empty dropdown. The reporter's H2D bridge stayed healthy throughout and its slicer Device tab populated correctly. The in-app Connection Diagnostic had passed (`port_mqtt: pass`, `mqtt_auth: pass`) because it didn't observe publish behaviour. The new check catches this class of failure on the user's first try.

### Changed
- **Slicer sidecar now ships as pre-built images on GHCR + Docker Hub — install works on QNAP / Synology / Container Station (#1657, reported by @d3nn3s08)** — Reporter on QNAP QTS 5.2.9 hit three install failures in sequence: the official `slicer-api/docker-compose.yml` used `build: { context: https://github.com/maziggy/orca-slicer-api.git#bambuddy/profile-resolver }`, which requires `git` in the Docker BuildKit worker — Container Station and Synology DSM don't ship git there, so the build fails immediately with `exec: "git": executable file not found`. Manual ZIP-as-local-context workaround tripped a QNAP filesystem quirk in the systemd post-install (`Failed to copy permissions from /etc/group`). Fallback to `ghcr.io/afkfelix/orca-slicer-api:latest-orca2.3.0` ran but couldn't slice — that image lacks the `bambuddy/profile-resolver` patches (the `inherits:` chain resolver, the `from: "User"` → `"system"` rewrite, the `# ` clone-prefix strip, and the sentinel-value strip), so `/profiles/bundled` returned 400 and `/slice` returned `Invalid parameter value(s) included in the 3mf file`. **The fix removes the build-from-source requirement entirely.** Both sidecar images are now built locally on Martin's box and pushed to two registries (`ghcr.io/maziggy/orca-slicer-api`, `docker.io/maziggy/orca-slicer-api`, and the same two for `bambu-studio-api`) via a new `docker-publish-sidecars.sh` helper in the `orca-slicer-api` repo; the stable Bambuddy publish script auto-invokes it after each release, and the beta script too. Daily-beta opts in only via `--include-sidecars` (slicer rebuilds are expensive). The helper has hard safety guards: aborts unless the orca-slicer-api repo is on `bambuddy/profile-resolver` AND the working tree is clean, and never executes `git checkout` / `pull` / `fetch` / `reset` itself. `slicer-api/docker-compose.yml` switches from `build:` to `image: ghcr.io/maziggy/orca-slicer-api:${SIDECAR_TAG:-latest}`. New `SIDECAR_TAG` env var in `.env.example` defaults to `latest`; set `SIDECAR_TAG=bambuddy-X.Y.Z` to pin to the sidecar image that shipped with a specific Bambuddy release. **Scope limitation**: both images are `linux/amd64` only. The OrcaSlicer multi-arch path stays on hold pending an upstream extraction fix — the kldzj/orca-slicer-arm64 AppImage's `--appimage-extract` silently fails under QEMU build emulation; the Dockerfile's `;`-chained RUN block masked the failure until the final `COPY squashfs-root` tripped. ARM64 hosts (Pi 4/5, Apple Silicon Linux) should run the sidecar on a separate x86_64 box and point Bambuddy at it via the **Sidecar URL** field — the sidecar doesn't need to live next to Bambuddy. **Docs aligned**: `slicer-api/README.md` and `wiki/features/slicer-api.md` rewrote the Quick start, Updating, and Sidecar source sections — `docker compose up -d` now pulls instead of building, and `docker compose pull && docker compose up -d` is the new update path (no `--no-cache --pull` dance because Compose only ever sees `image:` references). The build-from-source path stays documented as an advanced option under "Building from source (advanced)" for forks / dev work.

- **VP access code is now auto-derived from the target printer in non-proxy modes (Discord report)** — A user on Discord set up a Queue-mode VP with a different access code than the real target printer and couldn't get the slicer to connect, even after the cert-trust path was sorted. Root cause: the live target-printer mirror that landed earlier in the 0.2.5 cycle forwards the slicer's MQTT/RTSPS auth bytes through to the real printer — the slicer holds **one** code in its profile (the one it bound the VP with), and that code has to pass two checks (VP listener, then real printer). If the codes diverge the bridge silently fails at the second hop and the slicer abandons the connection (e.g. opens 8883, FINs before sending a ClientHello). The wiki *did* document a code-match requirement but framed it as a camera-only concern (`MQTT and FTP work either way; only the camera path needs the match`) — wrong, all bridged protocols inherit. **The fix removes the foot-gun rather than re-document it.** When a target printer is selected on a non-proxy VP (Archive / Review / Queue), the access-code field in the VP card switches to a read-only display showing the target's code with an Eye-toggle reveal, and the backend auto-inherits the value on every `create` / `update` (any explicit `access_code` submitted alongside a target is silently overridden — belt-and-braces for non-UI clients). When no target is set, the field stays editable as before. The same `inheritsAccessCodeFromTarget` predicate gates a small "Inherited from target" badge in place of the existing `isSet` / `notSet` status pill. Changing the target after the slicer has already bound triggers an info toast ("Access code now matches the new target — re-add this device in your slicer") because the slicer's stored code is now stale. **One-shot startup migration** in `core/database.py` corrects any pre-existing mismatched VPs on first boot after the upgrade: SELECTs the diverged rows for an INFO log per VP (`VP 'Workshop Queue' (id=3) access code synced from target printer 'X1C #2'` — audit trail for anyone digging through logs), then UPDATEs via correlated subquery (idempotent — the WHERE clause excludes already-synced rows, so re-running is a no-op; portable across SQLite and Postgres). No user-facing banner because there's no action for the user to take — the fix is done, and a previously-stuck bridge now works. **Wiki**: `features/virtual-printer.md` line 1189 flipped from the wrong MQTT/FTP-work-either-way claim to "the bridge forwards slicer auth bytes through; Bambuddy auto-derives so the codes can't diverge", the line-84 tip's "for camera" framing replaced with the broader rule, and the port-table row for RTSP `:322` annotated with "transparent passthrough to the real printer's `:322`, same end-to-end TLS as proxy mode" so the dedicated-bind-IP-vs-passthrough-to-printer apparent contradiction reads as one consistent model. **i18n**: 5 new keys (`accessCode.inheritedFromTarget`, `accessCode.derivedFromTargetHint`, `accessCode.reveal`, `accessCode.hide`, `toast.targetCodeChangedRebind`) translated in all 11 locales (de/en/es/fr/it/ja/ko/pt-BR/tr/zh-CN/zh-TW), no English fallbacks per the project's hard rule.

- **File Manager sidebar: "All Files" now scopes to your own uploaded files; new "External" entry holds the combined linked-folder view (#1621, reported by @kcw96)** — Reporter linked a NAS share that auto-imported hundreds of 3MFs, and from then on their handful of Bambuddy-uploaded files was lost in the "All Files" listing — no filter, no toggle, only per-folder clicks to escape the noise. Restored the pre-external semantics so long-time users get their muscle memory back: "All Files" lists managed-storage files only (`is_external=False`), exactly what it meant before external folders existed. The combined "everything across every external mount" view moves to a new sibling sidebar entry, **External**, which only renders when at least one external folder is linked (zero-cost on installs that don't use the feature). Per-folder clicking is unchanged: clicking any folder in the tree — internal or external — still shows that folder's contents directly. **Backend**: `/api/v1/library/files` gains two mutually-exclusive query flags, `internal_only` and `external_only`, filtering directly on `LibraryFile.is_external`. Both-flags-set is a 400 (catches frontend regressions immediately instead of silently picking one). Folder- or project-scoped requests bypass both flags because they already imply a single scope. **Frontend**: new `topLevelView: 'internal' | 'external'` state on `FileManagerPage`, default `internal`; the query passes the corresponding scope only when `selectedFolderId === null`. Sidebar shows the "External" row gated on `folders.some(f => f.is_external)`; mobile selector dropdown carries a `__top:internal` / `__top:external` sentinel so the same state can round-trip through `<option value>`. Empty-state copy distinguishes "no internal files yet" from "no external files" so a user staring at an empty External view doesn't think their NAS is broken. **i18n**: 3 new keys (`allExternal`, `externalIsEmpty`, `externalEmptyDescription`) translated in all 10 non-English locales. **Tests**: 3 new backend integration tests in `test_library_api.py` (internal-only with mixed root + folder + external file mix, external-only across two NAS mounts, mutually-exclusive 400) and 3 new frontend tests in `FileManagerPage.test.tsx` (External entry conditional on `is_external`, default internal-only query, External-click switches scope). Existing 48 `FileManagerPage` tests + 11 `FileManagerExternalFolder` tests stay green. **Behaviour change for the small set of users who relied on the combined view as default**: clicking "External" once gets the previous union behaviour (across-all-externals); clicking a specific external folder still shows just that mount, same as before.

- **Empty AMS units no longer trigger hourly humidity/temperature notifications (#1619)** — The hourly AMS sensor recorder in `backend/app/main.py::record_ams_history` fanned out humidity and temperature alarms for every AMS unit above threshold without checking whether the unit was actually loaded with filament. Empty AMS units still report ambient sensor readings, so users with one loaded AMS and one empty one got useful alarms for the loaded unit and steady noise for the empty one every hour. The reporter's workaround (disable all AMS humidity notifications) also killed the useful alarms — not a real choice. New `_ams_has_filament(ams_data)` helper inspects the firmware-reported `tray_exist_bits` hex bitmap (one bit per tray slot, `"0"` / `"00"` = empty unit) with a fallback to the `tray` array's `tray_type` strings for early-pushall shapes where the bitmap is missing. The recorder gates the alarm dispatch on this check per-AMS-unit, so a multi-AMS printer with one loaded + one empty still alarms on the loaded one. **Sensor history still records regardless of the gate** so the System page humidity/temperature charts stay continuous — the only thing the gate suppresses is the outbound notification. 9 unit tests in `test_ams_alarm_gating.py` cover the bitmap-zero-is-empty case, single/multi/all-loaded variants, the `tray_exist_bits` missing → tray-array fallback, garbage bitmap → fallback, blank bitmap → fallback, non-string bitmap → fallback (Bambu sometimes sends `int`), whitespace-only `tray_type` not counting as loaded, and defensive non-dict tray entries.

- **Inventory: `/reset-usage` renamed to `/reset-consumed-counter`; UI label is now "Reset counter"** — The old endpoint name implied that calling it would drop `weight_used` to 0; in practice it only stamps `weight_used_baseline = weight_used` so the Inventory page's "Total Consumed" widget (which renders `weight_used - baseline`) reads 0 going forward, while remaining (`label_weight - weight_used`) is preserved. Calling the endpoint via curl and seeing `weight_used` unchanged in the JSON response is confusing — the name didn't describe what the endpoint actually does. New paths: internal `/api/v1/inventory/spools/{id}/reset-consumed-counter` + `/spools/reset-consumed-counter-bulk`, Spoolman-mode `/api/v1/spoolman/inventory/spools/{id}/reset-consumed-counter` + `/spools/reset-consumed-counter-bulk`. **Behaviour is unchanged in both modes**: internal stamps the baseline directly; Spoolman-mode PATCHes upstream `used_weight=0` and the `_map_spoolman_spool` read mapping at `_spoolman_helpers.py:252-268` reconstructs the same `displayed consumed = 0, remaining unchanged` Bambuddy-visible shape — Bambuddy-side parity between modes (per [[feedback_inventory_modes_parity]]) was already in place before this rename and is preserved. The Spoolman-client method `reset_spool_usage` keeps its name because it describes what's sent upstream to Spoolman, which has not been renamed. **Frontend**: `api.resetSpoolUsage` / `bulkResetSpoolUsage` (and Spoolman variants) renamed to `resetSpoolConsumedCounter` / `bulkResetSpoolConsumedCounter`. Button labels switch from "Reset usage to 0" to "Reset counter" / "Reset all counters" — short and unambiguous; tooltips and confirm-modal bodies still spell out the full semantics ("zero the consumed-grams counter; remaining weight is not changed"). **i18n**: 9 keys renamed (`resetUsage*`, `resetAllUsage*`, `usageReset`, `allUsageReset`, `resetUsageFailed` → `resetConsumedCounter*`, `resetAllConsumedCounters*`, `consumedCounterReset`, `allConsumedCountersReset`, `resetConsumedCounterFailed`); real translations shipped in all 10 non-English locales (de / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW) per the hard-rule against English fallbacks. **Tests**: `test_spool_reset_usage.py` (9 tests, internal mode) and 3 reset-related tests in `test_spoolman_inventory_api.py` updated to hit the new paths; behavioural assertions unchanged. **Breaking change for external API consumers** that already wired `/reset-usage` — no compat shim shipped because the old name actively misled callers; the migration is a one-line URL swap.

- **`docker-compose.yml`: bridge-mode warning about the 1001-port FTP passive range + docker-proxy RAM footprint (#1646, reported by @TheFou)** — Reporter on bridge mode (Docker default `userland-proxy: true`) saw ~2000 `docker-proxy` host processes spawn from the commented `"50000-51000:50000-51000"` line, pinning ~3.5 GB of host RAM before they had even logged in for the first time. Linux's host-mode default in the same compose file sidesteps this entirely (zero docker-proxy cost) — the issue only fires when a user forces bridge mode (typically macOS/Windows / Docker Desktop). The 1001-port range itself is load-bearing on the VP server side (`virtual_printer/ftp_server.py:567-574` documents the widening from 100 ports as multi-VP collision-avoidance headroom; reverting would regress that), so the fix is documentation, not code. Added a warning block above the commented FTP-passive line pointing bridge-mode users at `{ "userland-proxy": false }` in `/etc/docker/daemon.json` — the reporter confirmed this clears the issue on their setup. Kernel does NAT directly via iptables/nftables in that mode, no per-port host process needed; only side-effect is that connections originating from 127.0.0.1 on the host itself can't reach the container, which doesn't matter for nearly every Bambuddy install.

- **AMS drying now enabled for H2C starting at firmware 01.02.00.00** — H2C was previously in `_DRYING_UNSUPPORTED_MODELS` alongside the A1 family. Moved to `_DRYING_MIN_FIRMWARE` with the same `01.02.00.00` floor as H2S / P2S. Both SSDP model codes the H2C advertises (`O1C`, `O1C2` — single- and dual-nozzle variants) get the same firmware gate so the `supports_drying()` check fires correctly regardless of which form is in the printer record. Test coverage extended in `TestSupportsDrying`: H2C / O1C / O1C2 cases added to the with-firmware pass set, the old-firmware fail set, and removed from the unsupported-models loop.

### Fixed
- **PostgreSQL restore from a SQLite backup no longer deadlocks against the print scheduler (reproduced 2026-06-09 restoring a native install's backup into a fresh Docker+Postgres deploy)** — Reporter (Maziggy) backed up the native install, brought up the new Docker image against an external Postgres, hit Restore in Settings → Backup. ~2 seconds in, the restore aborted with `asyncpg.exceptions.DeadlockDetectedError: Process X waits for AccessExclusiveLock on relation 109940; Process Y waits for RowExclusiveLock on relation 110182`. **Root cause: the existing `close_all_connections()` step before the DB swap only disposes the SQLAlchemy engine's connection POOL — the asyncio tasks that USE the engine keep running.** The `print_scheduler.run()` loop (30 s cadence) and `smart_plug_manager._snapshot_loop()` (30 s cadence) wake up after the dispose, call `async_session()`, lazily reopen a pool connection, and start a normal transaction that grabs `RowExclusiveLock` on `print_queue` / `smart_plug_energy_snapshots`. The restore's `DROP TABLE IF EXISTS public.<tbl> CASCADE` pass in `_import_sqlite_to_postgres` needs `AccessExclusiveLock` on every public table — AB/BA lock-order conflict, classic Postgres deadlock, restore transaction rolled back. The log confirms: `13:44:53,669` restore begins → `13:44:53,680` print_scheduler fires queue check → `13:44:55,607` smart_plug_manager fires snapshot → `13:44:55,607` deadlock detected. The existing code already paused `virtual_printer_manager` before restore for file-lock reasons; the other timer-based DB writers were missed. **Fix — two layers.** (1) Before `close_all_connections()`, pause the four most active timer-based DB writers via their existing stop affordances: `print_scheduler.stop()`, `smart_plug_manager.stop_scheduler()`, `notification_service.stop_digest_scheduler()`, `await background_dispatch.stop()`. Then `await asyncio.sleep(1.0)` to let in-flight loop iterations commit and release their sessions before the engine pool gets disposed. We don't restart the services on success because the restore handler already tells the user to restart Bambuddy to pick up the new DB. (2) Belt-and-braces inside `_import_sqlite_to_postgres`: prepend `SET LOCAL lock_timeout = '10s'` to the begin-block before the `DROP TABLE CASCADE` pass, so any residual writer that slips through the pause window (per-printer MQTT clients writing reactively to state changes, the hourly AMS history recorder firing inside the restore window, etc.) surfaces a fast `lock_timeout` error instead of producing a fresh deadlock or hanging the restore for 30+ seconds. `SET LOCAL` is transaction-scoped so the global default applies to every other DB caller. Scope clarification: there are ~12 background services started at lifespan startup; the four paused here are the ones with the tightest cadences. Slower-cadence services (`github_backup_service`, `local_backup_service`, `library_trash_service`, `archive_purge_service`, AMS history, runtime tracking, SpoolBuddy watchdog, camera cleanup) all fire on hour-or-longer intervals and are statistically very unlikely to land inside a few-second restore window; the lock_timeout layer catches them if they do. **Tests**: `test_restore_sqlite_wal_safety.py` and `test_settings_api.py` integration suites (53 tests) stay green on the edited handler; ruff clean; runtime smoke (`from backend.app.services.X import Y` + `hasattr` + `iscoroutinefunction` check) confirms all four stop signatures match the patch's sync/async mix.

- **Configure Slot now keeps the active K-profile on reopen for assigned-but-unconfigured slots (#1689 follow-up, reported and patched by @Spionkiller01)** — After the original #1689 fix shipped, Spionkiller01 found a residual case: on a slot that's *physically loaded but unconfigured* (filament inserted, but the printer hasn't bound a preset yet — `tray_type=""`, `tray_info_idx=""`, no `slot_preset_mappings` row), the first open of Configure Slot showed the right K-profile, but closing it with the X and reopening it dropped back to "default 0.020". Clicking "Configure slot" (Apply) once persisted it, but the user shouldn't have to. **Root cause: the original #1689 cali_idx safety net was unreachable on this code path.** `matchingKProfiles` in `ConfigureAmsSlotModal.tsx:751` early-returned `[]` when `selectedPresetInfo` was null — and `selectedPresetInfo` resolves to null exactly when there's no resolvable slot preset (unconfigured slot, no mapping row). The "always include the slot's currently-active K-profile by cali_idx" branch lives *past* the main name+id matcher, so it never ran from the no-preset path. On first open a freshly-cached preset briefly let the safety net trigger; on reopen the live slot state had no preset, returned `[]`, the auto-select effect saw no candidates, the modal fell back to default 0.020. **Fix (verbatim from Spionkiller01's H2C-tested diff, with the existing extruder guard):** split the early return into two — still short-circuit on missing kprofilesData, but when `selectedPresetInfo` is null and `slotInfo.caliIdx > 0`, find the active profile by `slot_id === activeIdx` (extruder-matched when known) and return it as a single-item list. The auto-select effect downstream then pre-selects it on reopen with no extra change. Strictly additive: with a resolvable preset present the existing matcher runs untouched; with `caliIdx === 0 || null` the function still returns `[]` (no unrelated profiles leak in). **Tests:** new vitest case `surfaces the slot's active K-profile when no preset is resolvable (#1689 follow-up)` exercises the path with `trayType=''`, no `savedPresetId`, and `caliIdx=6` against a K-profile fixture at `slot_id=6` — asserts the dropdown surfaces it. Verified the test fails without the patch (stash → run filter → fail; pop → run → pass). The existing `caliIdx === 0` guard test continues to pass under the new branch. Full ConfigureAmsSlotModal vitest 24/24 green. **Credit:** @Spionkiller01 for spotting the residual edge case after merge, producing the diff, and testing live on an H2C — `Co-Authored-By` on the commit.

- **K-profile matching now prefers filament_id over parsed names — surfaces custom profiles in the spool form AND fixes Configure Slot showing "default 0.020" for an actively-bound K-profile (#1688 + #1689, both reported and diagnosed by @Spionkiller01 with concrete H2C testing; #1689 also reported by @IndividualGhost1905)** — Two related symptoms on different UI surfaces, same root cause. **#1688: spool form's PA-profile suggester** (`frontend/src/components/spool-form/PAProfileSection.tsx` via `isMatchingCalibration` in `spool-form/utils.ts`) only matched K-profiles by parsing the profile *name* for material/brand/variant. Spools already store `slicer_filament` (the slicer preset's id) and K-profiles already carry `filament_id`, but both were ignored — so a user's custom K-profile whose name doesn't agree with the slicer preset's name got silently dropped from the suggestion list even when the underlying filament_id was identical. **#1689: ConfigureAmsSlotModal's K-profile filter** (`matchingKProfiles`) ran the same name-only logic on the slot's selected preset — a spool assigned under "Generic PLA" with a custom K-profile actively bound on the printer landed in the modal as "K profile not assigned, default 0.020 will be used", while the printer-card hover-card correctly showed the active profile. The hover-card and the Configure Slot modal disagreed because they used different lookup paths; the modal's path was the one with the name-parse filter. **The shared root cause: spool preset ids and K-profile filament_ids look different but are equivalent after normalisation.** Spools store `slicer_filament` as the cloud setting_id form ("GFSG98_09" — `_09` is the variant suffix, the "S" infix marks it as a setting_id); K-profiles store `filament_id` as the bare form ("GFG98"). Plain `===` doesn't match; both need normalising first. This conversion already exists *in the other direction* at `buildFilamentOptions` (filament_id → "GFS" + filament_id.slice(2) for setting_id), so the inverse `toFilamentId` helper isn't speculative — it's just the matching reverse. **Fix — one shared helper, two surfaces:** new exports in `frontend/src/components/spool-form/utils.ts` — `toFilamentId(id)` normalises both shapes by dropping the "_NN" variant suffix and stripping the "S" in "GFS" (so both "GFSG98_09" and "GFG98" yield "GFG98"); `isGenericFilamentId(id)` flags Bambu's generic `GFx99` ids (GFL99 = generic PLA, GFG99 = generic PETG, etc.) which are shared across many physical filaments and must NOT id-match (they over-match and obscure brand-specific profiles — name fallback handles those correctly). Then: (1) `isMatchingCalibration` accepts a new `slicer_filament?: string` formData field, tries id-match first (with generic exclusion), falls through to the existing name parse — `PAProfileSection` already passes the full `formData` so no caller edit needed. (2) `ConfigureAmsSlotModal.selectedPresetInfo` now also resolves a `filamentId` (via `toFilamentId(cp.setting_id)` for cloud presets; `toFilamentId(builtinFilamentId)` for builtin; empty for local/orca paths that fall through to name match); `matchingKProfiles` adds the id-match check at the top of the per-profile predicate, then keeps the existing name logic, then *always* unshifts the slot's currently-active K-profile (by `slot_id === slotInfo.caliIdx`, gated on `activeIdx > 0` so caliIdx=0/null doesn't leak unrelated profiles in, and extruder-matched when known) — covers the #1689 case where the spool was bound under a generic preset but the active profile lives under a different filament_id entirely. The "always include active" branch is Spionkiller01's #1689 diff verbatim, gated more tightly. **SpoolBuddy coverage:** both K-profile surfaces in the kiosk UI reuse the shared components — `SpoolBuddyWriteTagPage` renders `<PAProfileSection>` (auto-fixed via `isMatchingCalibration`), `SpoolBuddyAmsPage` renders `<ConfigureAmsSlotModal>` (auto-fixed via `matchingKProfiles`). No kiosk-specific edits required; the shared helpers carry the fixes through. (`SpoolBuddyCalibrationPage` is scale calibration, unrelated; `InventorySpoolInfoCard` is display-only.) **What this does NOT change**: spools without a slicer_filament, K-profiles without a filament_id, and generic GFx99 ids all fall through to the existing name-based matching path — strictly additive precedence, no behaviour change for the name-only cases that already worked. The new id-match never causes a *miss* the old code would have caught. **Tests:** 21 new vitest cases — `isMatchingCalibration.test.ts` (18 cases) pins the `toFilamentId` round-trip in both directions (GFSG98_09 → GFG98 and back is identity-preserving for the cloud→K-profile flow), the generic `GFx99` exclusion, falsy/non-Bambu id pass-through (numeric local-preset id, Orca UUID), and the id-match-wins-over-name behaviour including the spool's reported `"GFSG98_09" ↔ K-profile "GFG98"` real-data scenario. `ConfigureAmsSlotModal.test.tsx` (3 cases) pins the modal-level behaviour: a custom K-profile name surfaces when filament_id matches (#1688 in-modal), the slot's active profile is always included even with no name/id match (#1689), and the `caliIdx == 0` guard prevents unrelated profiles from leaking in via the safety net. Full frontend vitest suite: 2108 / 2108 green. ESLint clean on touched files; frontend build clean. **Credit & dispatch:** @Spionkiller01 diagnosed both issues with concrete data (the `GFSG98_09 ↔ GFG98` normalisation case is theirs), tested both patches live on an H2C, and explicitly offered to PR. Landed verbatim with adjustments (shared helper, tighter active-profile guard) and `Co-Authored-By`. @IndividualGhost1905 also reported #1689 independently and identified its connection to #1688.

- **Tabs no longer go silently zombie after the JWT expires — auth-expiry now redirects to /login on the same tab (#1698, reported by @TCL987, fix patched in reporter's fork)** — Reporter on X1C, Docker install, left a Bambuddy tab open past the 24 h JWT lifetime. After expiry: navigation between pages still worked, but every API request silently failed, leaving the UI looking like every list was empty. A manual refresh was needed to land on `/login`. **Root cause: `AuthContext.user` stays stale after the JWT clears.** When a 401 with a token-invalidating message (`Token has expired`, `Could not validate credentials`, `User not found or inactive`, `Invalid API key`, `API key has expired`) lands in `frontend/src/api/client.ts:154-167`, the handler calls `setAuthToken(null)` to drop the token from sessionStorage / localStorage — but `AuthContext.user` is a React state value that was populated once at mount via `checkAuthStatus()` → `/auth/me`, and `setAuthToken(null)` doesn't reach into AuthContext's React tree. `ProtectedRoute` (`App.tsx:101`) only redirects when `user === null`, so the protected tree keeps rendering, every subsequent request goes out with no Authorization header, the backend 401s, and the UI shows nothing. A page refresh remounts `AuthProvider`, `checkAuthStatus()` finds no token, `setUser(null)` fires, the redirect runs — which is what the reporter ended up doing every 24 h. The 3 other `setAuthToken(null)` call sites all live inside `AuthContext` itself and pair with `setUser(null)` directly, so no cross-module signal was needed for them; the `client.ts:165` site was the only one missing the React-tree notification. **Fix (mirrors the reporter's fork patch deec96d1):** after `setAuthToken(null)` in `client.ts`, dispatch a `window.dispatchEvent(new CustomEvent('auth:expired'))` (guarded on `typeof window !== 'undefined'` for SSR / test safety). `AuthContext`'s mount `useEffect` adds a `window.addEventListener('auth:expired', handleAuthExpired)` listener whose handler calls `setUser(null)` after a `mountedRef.current` guard, and removes the listener in the effect's cleanup so unmount → remount doesn't double-bind. `ProtectedRoute` then sees `user === null` on the next render and runs `<Navigate to="/login" replace />` immediately, no manual refresh needed. **What this intentionally does NOT change**: generic `401 Authentication required` responses (without a token-invalidating message) still don't clear the token or fire the event — they're treated as transient timing issues, exactly as `client.ts:155`'s pre-existing comment documents. So a one-off 401 from a race during login won't redirect a working session. Listener cleanup means tests / dev hot-reload don't accumulate handlers. **Tests:** 4 new vitest cases — `client.test.ts` gains "dispatches 'auth:expired' event on 401 with invalid token message" and "does not dispatch 'auth:expired' on 401 with generic auth error" (both use `vi.fn()` listeners on `window` to assert the event fires/doesn't fire). `AuthContext.test.tsx` gains a new `auth:expired event (#1698)` describe block — "clears user when an auth:expired event is dispatched" simulates the login → expiry → event → user-null flow end-to-end via `setAuthToken('valid-token')` (the canonical setter; writing to sessionStorage post-import wouldn't propagate to the module-level `authToken` variable initialised at import time), and "does not crash when the event fires after unmount" pins the `mountedRef` guard so the listener can't trigger a state-update-after-unmount warning. Full frontend vitest suite: 2087 / 2087 green. ESLint clean on touched files. Frontend build clean. **Credit to @TCL987** for diagnosing this and shipping the working fix on their fork before opening the issue.

- **Filament usage no longer over-counts when printing one plate from a multi-plate 3MF (#1697, reported by @volodymyr-doba)** — Reporter on P1S printed a single lid (~190 g grey PETG) from `gridfinity-storage-box-5x4x6.gcode.3mf` (a multi-plate file with 5×box + 5×lid plates) and the spool's Usage History recorded 242 g of grey + 31 g of black — the **whole file's** filament total, not the dispatched plate. The print took 5 h 47 m which matches the lid alone, and the queue card correctly previewed 190 g, but the spool got debited for everything. **Root cause: usage tracking parsed the 3MF without a plate filter.** `extract_filament_usage_from_3mf(file_path, plate_id)` in `backend/app/utils/threemf_tools.py` already supports filtering and the queue's pre-flight capacity check at `api/routes/print_queue.py:254/:286` passes `item.plate_id`, but the two completion-time recorders did not: `_track_from_3mf` in `services/usage_tracker.py:907` (internal Filament Inventory) and `store_print_data` in `services/spoolman_tracking.py:223` (Spoolman mode) both called the extractor with no plate_id and summed every plate. Per `feedback_inventory_modes_parity` both modes had to ship in the same drop, AND per the verification pass after the initial implementation: the direct-Print path (`api.reprintArchive` / `api.printLibraryFile` with `plate_id: selectedPlate` in `PrintModal/index.tsx:739/750`) hits the same bug because it never goes through the queue — caught before merge by tracing the frontend dispatch surface end-to-end. **Fix — two complementary captures:** (1) `PrintSession` gains a `plate_id: int | None` field; `on_print_start` queries `PrintQueueItem` for the printer's currently-printing row and records `queue_item.plate_id` onto the session — covers the queue path. (2) `register_expected_print` in `main.py` accepts a new `plate_id` parameter and stores it in a parallel `_print_plate_ids: dict[int, int]` dict (mirror of `_print_ams_mappings`); `background_dispatch.py`'s 2 register sites and `print_scheduler.py`'s 1 register site now pass plate_id (the dispatch already resolved it via `_resolve_plate_id`; reordering the resolve to run before register is a no-op since the resolver is pure). At expected-print promotion, `main.py` injects `_print_plate_ids[archive_id]` into `_active_sessions[printer_id].plate_id` (only when the session has no plate_id yet — queue captures win), mirroring the existing `ams_mapping` injection pattern. The dict drains on `on_print_complete` and on TTL eviction of the matching `_expected_prints` entry — same lifecycle as `_print_ams_mappings`. (3) `_track_from_3mf` accepts a new `plate_id` kwarg, threads it from `session.plate_id`, and passes it to `extract_filament_usage_from_3mf`. (4) `store_print_data` accepts a `plate_id` kwarg; the 3 call sites in `main.py` pass `_get_start_plate_id(archive_id)` (new helper, parallel to `_get_start_ams_mapping`); within `store_print_data` the caller value wins, falling back to `queue_item.plate_id` for the queue path. **The PrintArchive's `filament_used_grams` stays file-level summed by design** (#1593's contract — the archive describes the file, not the run); only the per-run usage attribution becomes plate-aware. **What this intentionally does NOT touch:** for direct Print of a single-plate file, `_resolve_plate_id` returns 1 → registered as `plate_id=1`, which extracts plate 1 = the whole file — identical to the prior no-filter behaviour. The change is observable only for multi-plate 3MFs where a specific non-first plate was dispatched. **Tests:** 9 new across `test_usage_tracker.py` + `test_spoolman_tracking.py` + `test_print_start_expected_promotion.py` — plate_id propagation through `_track_from_3mf`; absence leaves it `None`; on_print_start captures queue_item.plate_id; on_print_start no-op when no queue item; Spoolman-mode plate-scoped extract; `register_expected_print` stores `plate_id` in `_print_plate_ids`; `_get_start_plate_id` reads it back; injection into session for direct-Print (no queue capture); guarded against overwriting an already-captured queue plate_id. The pre-existing `test_prefers_explicit_ams_mapping_over_queue_mapping` updated for the new unconditional queue lookup (was conditional, now always queries to capture plate_id). Full 5830-test backend suite green. Ruff clean across the entire backend, not just touched files.

- **AMS slots with a spool loaded but no material configured now show "?" instead of "Empty" (#1694, reported by @kleinwareio)** — On a 3-AMS P1S the reporter's screenshot showed AMS-C slots labelled "Empty" even though spools were physically loaded; OrcaSlicer's Device view showed the same slots as loaded. **Root cause:** the compact label below the AMS slot circle in PrintersPage rendered `tray.tray_type || t('ams.slotEmpty')`, falling back to "Empty" whenever the printer firmware hadn't been told which material is in the slot. The codebase already had a `getEmptySlotKind` helper that distinguishes `'physical'` (firmware confirmed empty via state 9/10) from `'reset'` (tray_type absent but firmware hasn't confirmed empty — i.e. spool loaded, just unassigned). The hover-card / circle border already used that distinction (line 814+ comment); the compact label did not. **Fix:** label now branches on `emptyKind` — `'physical'` keeps "Empty" (the firmware-confirmed empty case), `'reset'` shows "?" (matching the slicer's own convention for "loaded but unknown material"). External / VT tray label is unchanged (external trays have no "configured/unconfigured" distinction — they're either loaded or not). The SpoolBuddy kiosk's `AmsUnitCard` was carrying the same bug and got the same fix (mirror of `getEmptySlotKind`, "?" vs "Empty" label, tooltip "Spool loaded — slot not configured"). **i18n:** new `ams.slotUnconfigured: '?'` key added to all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW) — value is universal so it's identical in every locale. The existing `ams.emptySlotReset = 'No filament assigned'` tooltip surface in FilamentHoverCard already covers the "what does this mean" question on hover, so no new tooltip key needed for the main card. **Tests:** AmsUnitCard vitest gains `shows "?" for loaded-but-unconfigured slot (#1694)` pinning both branches in one render (one slot with `state: 9` → "Empty", one with no state → "?"). Existing AMS tests stay green (9/9 SpoolBuddy AmsUnitCard; AMS load/unload page tests untouched and green); i18n parity green (5100 leaves × 11 locales); frontend build clean; ESLint clean.

- **Virtual Printer MQTT no longer disconnects idle OrcaSlicer at keepalive×1.5 (#1548 round 2, reported by @hollajandro)** — Round 1 (commits b6636053 + 4ffefa60) shipped the keepalive parser + 1.5× idle disconnect per MQTT spec §4.4 and a per-minute status-push diagnostic. Reporter's follow-up pcap proved the round-1 logic was correct as designed, but exposed the actual root cause: the same OrcaSlicer install which stays connected to a real Bambu P1S indefinitely sends zero MQTT packets after the initial CONNECT / SUBSCRIBE / pushall / get_version burst — no PINGREQ at all — so any §4.4-compliant server disconnects it at `keep_alive × 1.5`. **Real Bambu firmware does not enforce §4.4** (verified: the reporter's identical Orca install holds an idle session against real hardware on the same network), so spec compliance is itself the regression. **Fix:** after CONNECT/auth, drop the application-level read timeout entirely (`read_timeout = None`) and set `SO_KEEPALIVE` on the underlying socket so the OS TCP stack detects truly dead connections within a few minutes. The 60 s pre-CONNECT timeout is preserved — a client that opens TCP but never sends CONNECT still gets reaped to prevent half-open resource leaks. Negotiated keepalive is still parsed and now logged at INFO ("MQTT client … authenticated (negotiated keepalive=Xs, idle disconnect disabled)") for support-bundle visibility. **Tests:** TestHandleClientIdleConnection adds `test_idle_client_stays_open_past_one_and_a_half_times_keepalive` (negotiates keep_alive=2, sits idle for 4 s, asserts handler still running and writer not closed — direct round-1 inversion), `test_so_keepalive_set_on_socket_after_connect` pins `setsockopt(SOL_SOCKET, SO_KEEPALIVE, 1)` runs on the wrapped socket the moment auth succeeds. PINGREQ test docstring updated since there's no longer a timeout for it to "reset". All 33 VP MQTT server tests green; ruff clean. After this ships, OrcaSlicer should stay connected to the VP indefinitely while idle and reconnect cleanly on real network drops.

- **System page now reports the container's uptime / boot time, not the host's (#1690, reported by @IndividualGhost1905)** — Reporter on Proxmox LXC observed that System → Uptime / Boot Time matched the Proxmox host's values, not the container's. **Root cause:** `psutil.boot_time()` reads `/proc/stat:btime`, which on shared-kernel containers (Docker, LXC) is the host kernel's boot time — leaking the host's lifecycle into Bambuddy's UI. **Fix:** read PID 1's create_time instead — `psutil.Process(1).create_time()` returns the POSIX timestamp of the init/entrypoint process, which in a container is the container's start time, and on bare metal / VMs is the host init (effectively identical to `psutil.boot_time()` within a sub-second). Defensive `psutil.Error` / `OSError` fallback to the old `psutil.boot_time()` for the rare case where /proc/1/stat is unreadable (locked-down container, custom seccomp policy). No frontend / i18n change — the field shape is unchanged, only the value is now correct on container installs. **Tests:** 2 new integration cases — one pins that the route reads `Process(1).create_time` and that the response uses that timestamp (not `boot_time`), the other pins the fallback path via a real `psutil.NoSuchProcess(1)` so the endpoint still returns 200 with the best-available answer. All 8 pre-existing system-info tests updated to also mock the new code path; full system API suite 20/20 green; ruff clean.

- **Profile editor filament type dropdown now lists PLA-CF and the other Bambu CF / GF / specialty materials (#1686, reported by @Bgabor997)** — Creating or editing a filament preset on the Profiles page (BL Cloud, Orca Cloud, and Local Profiles all open the same shared editor) only offered 11 base materials (PLA, ABS, PETG, TPU, PA, PA-CF, PET-CF, PC, ASA, PVA, HIPS). Reporter on P1S wanted to tag a custom preset as PLA-CF — the dropdown source had no entry, so the saved preset's `filament_type` was wrong and the printer received the wrong material code at dispatch. **Root cause:** `backend/app/data/filament_fields.json` (served by `GET /cloud/fields/filament` and consumed by `ProfilesPage` via `getCloudFields`) shipped a curated subset that pre-dated Bambu's CF/GF lineup expansion. Other surfaces in the codebase already named the canonical list (`utils/filament_ids.py` `GENERIC_FILAMENT_IDS`, `spool-form/utils.ts` MATERIALS, the Bambu filament-id catalog in `cloud.py`), so the gap was specifically in the editor's allowed-values JSON. **Fix:** expanded the `filament_type` select to 25 BambuStudio-aligned options grouped by family — PLA (+ CF/GF/AERO), PETG (+ CF), ABS (+ GF), ASA (+ CF/GF), PC, PCTG, PA family (+ CF/PAHT-CF/PA6-CF/PA6-GF), PET-CF, TPU, PPS family (+ CF/GF for X1E), PVA, HIPS. No frontend, no i18n (material codes are universal). K-profiles editor unaffected — it picks `filament_id`, not `filament_type`. **Tests:** 15 unit cases in `test_filament_fields_options.py` pin every newly-added variant (PLA-CF, PLA-GF, PLA-AERO, PETG-CF, ABS-GF, ASA-CF, ASA-GF, PCTG, PAHT-CF, PA6-CF, PA6-GF, PPS, PPS-CF, PPS-GF) plus the baseline-must-still-be-present guard so a future curation pass can't silently drop them.

- **Native systemd install no longer fails when INSTALL_PATH is under /home (#1685, reported by @Geoff-S)** — `bambuddy.service` shipped with `ProtectHome=true`, which makes `/home/*` invisible to the service namespace. When the user installed into `/home/bambuddy/` (instead of the default `/opt/bambuddy/`), the `ExecStart=/home/bambuddy/venv/bin/uvicorn` path couldn't be resolved at exec time and the unit failed with `status=203/EXEC: Unable to locate executable`. The `ReadWritePaths=$INSTALL_PATH` directive doesn't reliably re-expose `/home/*` subpaths for executable resolution. **Fix:** `install/install.sh` now detects `INSTALL_PATH == /home/*` and emits `ProtectHome=read-only` for that case; the default `/opt/bambuddy/` install keeps the stricter `ProtectHome=true`. The manual `deploy/bambuddy.service` template defaults to `ProtectHome=read-only` with a comment explaining when to tighten it to `true`. `read-only` keeps `/home` immutable to the service (no security regression — the service can read its venv but not write anywhere outside the `ReadWritePaths` allowlist).

- **VP settings card now shows the target printer's serial in proxy mode** — On a proxy-mode VP, the runtime services (SSDP advertisement, MQTT bind identity, certificate subject) all use the target printer's actual serial via `target_printer_serial or self.serial` (`manager.py:235, 941, 957`), but the `/api/v1/virtual-printers` response — which feeds the VP settings card — always returned the self-generated suffix-based serial from `_get_serial_for_model(model_code, vp.serial_suffix)`. The card therefore displayed a serial that didn't match what the bridge actually advertises and what the slicer sees, breaking the visual "one identity per VP" mental model. **Fix:** `_vp_to_dict` (`api/routes/virtual_printers.py:77`) is now async and accepts `db`; when `vp.mode == VP_MODE_PROXY and vp.target_printer_id`, it issues a single `SELECT serial_number FROM printers WHERE id = vp.target_printer_id` and substitutes the result into the response `serial` field. Archive / queue / review modes keep the self-generated serial — those modes synthesise their own identity and never speak the target's. **Defensive fallback** when the target row is missing (printer deleted mid-config, manual SQL tweak, race between delete-printer and read-VP): the response falls back to the self-generated serial so the card still renders and the user can fix the target, rather than the API 500-ing. All 4 `_vp_to_dict` call sites (list, create, get, update) updated to `await` with `db`. **Tests:** 3 new in `TestVirtualPrinterSerialSurface` — proxy VP returns target serial across all three response paths (create / get / list), non-proxy VP with a target still uses the self-generated serial, orphaned proxy VP falls back to self-generated. Full VP API suite stays green (34/34); VP unit suite stays green (126/126); ruff clean.

- **Print modal now exposes a "Nozzle Offset Calibration" toggle for dual-nozzle printers (#1682, reported by @louiskleiman)** — Reporter on H2D running diamond nozzles: BambuStudio exposes a per-print "Nozzle Offset Calibration" option that is incompatible with diamond hot ends, but Bambuddy had no way to control the same flag, so every dispatch silently set it to the firmware default. **Root cause: the field was hardcoded.** `bambu_mqtt.py:3445` always wrote `"nozzle_offset_cali": 2` (skip) into the MQTT `project_file` payload, regardless of model, regardless of any user choice. The wire format is tri-state — `1`=run, `2`=skip — and matches BambuStudio's encoding; the manual-calibration route (`/printers/{id}/calibration`) already wired the corresponding `cali_idx=2` MQTT command, but the **dispatch-time** toggle was simply absent. For most users this was invisible (BambuStudio's default is "run" on H2D / H2D Pro / H2C / X2D, Bambuddy's default was effectively "skip"), but a diamond-nozzle setup that needs the calibration explicitly off had no way to confirm Bambuddy's behaviour or override it the other way once we add a toggle that follows the slicer's default. **Fix: end-to-end plumbing of `nozzle_offset_cali` with a hard MQTT-layer gate on dual-nozzle.** `start_print()` (`bambu_mqtt.py:3300`) gains a `nozzle_offset_cali: bool = False` kwarg and the project_file payload line becomes `"nozzle_offset_cali": 1 if (nozzle_offset_cali and is_dual_nozzle) else 2`. The dual-nozzle check reuses `is_dual_nozzle_model()` and the runtime `_is_dual_nozzle` flag (set when `device.extruder.info` has ≥ 2 entries) — same canonical signal the rest of bambu_mqtt.py uses for routing decisions. **Even if a stale queue item from when the printer was misidentified carries the flag, the MQTT layer downgrades it to `2`** so firmware never tries to calibrate a head it doesn't have. The kwarg threads through `printer_manager.start_print()`, both `background_dispatch` call sites, and `print_scheduler._start_print` so every dispatch path — direct reprint, library file, queue-dispatched, watchdog-recover — respects the per-item setting. **Persistence:** `print_queue.nozzle_offset_cali` column (BOOLEAN DEFAULT TRUE, branched on `is_sqlite()` because Postgres rejects `DEFAULT 1` for BOOLEAN, caught by my Postgres test environment before this shipped) — default TRUE matches BambuStudio's behaviour on dual-nozzle, the MQTT gate makes the value a no-op on single-nozzle. New `default_nozzle_offset_cali` setting (default TRUE) plumbed through `schemas/settings.py`, the settings PUT allowlist, and the SettingsPage card — the row in **Settings → Default Print Options** only renders when `printers.some(p => p.nozzle_count === 2)`, so single-nozzle-only users never see a control they can't act on. ReprintRequest + FilePrintRequest schemas (`schemas/archive.py`, `schemas/library.py`) carry the field too so the API surface is consistent across the three "send 3MF to printer" routes. **Frontend:** `PrintOptionsPanel` (`components/PrintModal/PrintOptions.tsx`) accepts a `showDualNozzleOptions` prop and filters the option list; `PrintModal/index.tsx` computes it from `selectedPrinters.some(p => p.nozzle_count === 2)` in printer-mode or from a small inline `DUAL_NOZZLE_MODELS` set in model-mode (mirrors the backend `DUAL_NOZZLE_MODELS` frozenset: `H2D`, `H2DPRO`, `H2C`, `X2D`). The same gate flows through `QueuePage` bulk-edit — the new tri-state toggle only renders if any registered printer has `nozzle_count === 2`. Labels reuse the existing `settings.defaultBedLevelling` / `settings.defaultFlowCali` / etc. translation keys (identical strings, already translated) to keep i18n churn proportional to the actual new copy. **i18n:** 3 new keys per locale × 11 locales = 33 entries — `settings.defaultNozzleOffsetCali`, `settings.defaultNozzleOffsetCaliDesc`, `queue.bulkEdit.nozzleOffsetCali` — real translations in every locale (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW), no English fallbacks. i18n parity check confirms 5069 leaves × 11 locales. **Tests:** 4 new in `test_bambu_mqtt.py` pin the four-quadrant gate: default value (P1S, no kwarg → `2`), single-nozzle ignore (P1S, kwarg `True` → still `2` — the safety net), dual-nozzle honour (H2D, `True` → `1`), dual-nozzle false (H2D Pro, `False` → `2` — the diamond-nozzle case). `test_printer_manager.py` updated for the new kwarg in `assert_called_once_with`. Frontend tests: existing PrintModal / QueuePage / SettingsPage suites pass with the new field threaded through (117 / 117). Full backend suite: 3840 / 3840 pass. ruff clean; frontend build clean; ESLint clean; i18n parity green.

- **"Assign Spool" no longer claims the AMS slot was configured when it wasn't (#1680, reported by @kleinwareio)** — Reporter clicked Assign Spool from the printer card for AMS-B slot 4 while that slot was empty. The toast said "Spool assigned and AMS slot configured" but the AMS card kept showing slot 4 as Empty. **Root cause: misleading toast on the empty-slot deferred-config path.** The backend (`inventory.py:1385-1405`) deliberately skips the MQTT `ams_filament_setting` publish when the AMS reports an empty tray state (state ∈ {9, 10}) because Bambu firmware silently drops the push for empty slots — there's no point sending a command the printer will discard. The assignment row is persisted with `pending_config=true`, and `on_ams_change` (`main.py:1031-1054`) re-fires the full configuration the moment the AMS reports a non-empty fingerprint in that slot. The flow is correct; the success log line `Pre-configured assignment: spool 16 → printer 1 AMS1-T3 (slot empty, will configure on insert)` confirms the backend did exactly that. **But the frontend ignored the response flag.** `AssignSpoolModal.tsx:153` always called `showToast(t('inventory.assignSuccess'), 'success')` — the wording "Spool assigned and AMS slot configured" — regardless of whether the backend actually configured the slot or deferred. The sibling SpoolBuddy modal (`spoolbuddy/AssignToAmsModal.tsx:212-226`) already branched on `pending_config` and showed a distinct "Slot will configure when you insert the spool" message; the printer-card modal was just never updated to match. **Fix:** `AssignSpoolModal.tsx` now reads `newAssignment.pending_config` and picks between `'inventory.assignSuccess'` (slot configured immediately) and the new `'inventory.assignPendingInsert'` ("Assigned. Slot will configure when you insert the spool.") key. Spoolman-mode branch unchanged — the Spoolman backend route always sends the MQTT push (no pending_config flag is exposed) and the SpoolBuddy modal's existing comment documents that. **i18n:** new `inventory.assignPendingInsert` key in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW), translations copied verbatim from the existing parallel `spoolbuddy.modal.assignPendingInsert` entries so the message reads identically across the app. No English fallbacks per the project's hard rule; i18n parity check confirms 5066 leaves × 11 locales. **Tests:** 2 new in `AssignSpoolModal.test.tsx` — `shows the pending-insert toast when backend returns pending_config=true (#1680)` pins the new branch (slot-was-empty case the reporter hit), and `shows the configured toast when backend returns pending_config=false (#1680)` is the counterpart regression guard so a future refactor can't silently mark every assign as pending. Both also assert the WRONG toast is NOT also called (defense against accidental double-toast). 16/16 AssignSpoolModal tests pass; frontend build clean; ESLint clean.

- **Restarting Bambuddy mid-print no longer marks the live archive as "cancelled / aborted" + duplicates it + double-counts filament (#1679, reported by @IndividualGhost1905)** — Reporter on X1C, daily build `v0.2.5b1-daily.20260607`: a print was running, the host was restarted (planned reboot / power outage / watchtower image update), and Bambuddy's printer card showed the print as **cancelled** while the printer continued printing happily. Print log showed `aborted` for that row, filament usage was deducted at the cancellation moment (48.6 g / 5 % in the supplied screenshots), and when the print actually finished a *second* archive was created and filament was deducted *again*. Net effect: filament inventory off by the entire print weight, statistics showing one "user-cancelled" entry alongside one "completed" entry for the same physical print. Second confirmed hit from the same reporter, plus a corroborating comment from @Arn0uDz on watchtower-driven restarts. **Root cause: connected-edge reconciliation fired on a bare MQTT-connected state that had no real data yet.** On Bambuddy startup, a fresh `BambuMQTTClient` is constructed with `PrinterState` defaults — most importantly `state.state = "unknown"` and `state.subtask_name = ""`. The MQTT `_on_connect` callback (`bambu_mqtt.py:668-669`) broadcasts `on_state_change(self.state)` *immediately* after the broker accepts the connection — BEFORE the `_request_push_all` round-trips with the printer's real status. `on_printer_status_change` (`main.py:825`) sees `state.connected=True` flip on the connected-edge, spawns `reconcile_stale_active_prints` for that printer. The reconcile walks every archive in `status="printing"`, calls `_is_active_archive_stale` (`main.py:3352`) — which sees `state.state="UNKNOWN"` (skips the IDLE/FINISH/FAILED branch), then `state.subtask_name=""` (matches trigger 3, "printer subtask_name empty") and **returns stale**. A synthesised `aborted` PRINT COMPLETE fires for every in-flight archive on every printer, clears `_active_prints`, and when the real PRINT COMPLETE finally arrives at print end, `_active_prints` doesn't have the entry, so a brand-new archive row is created instead of overwriting the synthesised one. The pre-existing comment at `_is_active_archive_stale` ("the next real PRINT COMPLETE would have overwritten the status anyway") was wrong: the reactive completion handler uses `_active_prints` for lookup, not a join on filename/subtask_id, so the original row stays cancelled and a duplicate is born. Timing-dependent in practice — on hosts where the printer's first `push_status` response wins the race against the reconcile background task, state is real and reconcile doesn't false-positive; on slower hosts or busy MQTT brokers, the bare-connect-edge fires first and the bug hits. The reporter is on a slower-race host and saw it twice. **Fix: two-layer guard.** (1) Primary: `on_printer_status_change` now gates the reconcile spawn on `state.state` being a real value — `state_known = bool(state.state) and state.state.upper() not in ("", "UNKNOWN")` — so reconcile doesn't fire until the first `push_status` updates `state.state` to a real Bambu firmware value (RUNNING / IDLE / FINISH / PREPARE / SLICING / PAUSE / FAILED). When that real push arrives, `on_printer_status_change` fires again, the connected-edge flag is still `False` (we never set it), and reconcile runs against actual evidence. The existing #1542 mechanism — synthesising a missed PRINT COMPLETE for prints that finished during a disconnect window — keeps working: if the printer reports `IDLE` on its first real push after reconnect, reconcile catches it the way it always did. (2) Belt-and-braces: `_is_active_archive_stale` now returns `(False, "")` when `state.state` is empty / `"unknown"` / `None`, regardless of the subtask fields. Strictly more conservative than the previous behaviour; only suppresses the degenerate-input false positive. Any future caller that bypasses the primary gate still can't synthesise an aborted completion from defaults. **Tests:** `test_reconcile_stale_active_prints.py` 26 cases (up from 21) — new parametrize `test_pre_push_state_returns_not_stale_even_with_empty_subtask` pins all five degenerate forms (`"unknown"`, `"UNKNOWN"`, `"Unknown"`, `""`, `None`) and asserts none triggers stale even with empty `subtask_id` + empty `subtask_name`. The existing #1542 regression coverage stays green — terminal-state, subtask-id-mismatch, and empty-subtask-name-under-RUNNING all still report stale on real state pushes. Full backend suite: 3836 / 3836 pass. ruff clean.

- **Print queue no longer wedges in "Currently Printing" when a printer accepts `project_file` but never starts (#1678, reported by @kleinwareio)** — Reporter on two P1S, one was power-cycled mid-print and came back online; from then on Bambuddy showed the next queue item as "Currently Printing" at 0% while the printer card showed "Idle / Ready to print". The same file also re-appeared in the Queued list as Pending after the user resubmitted. Only restarting the Bambuddy container ever recovered it. Support log + screenshots confirm: at dispatch time MQTT `project_file` was ACK'd, printer pushed `gcode_state=IDLE, gcode_file=<our-file>, subtask_id=<our-submission-id>` — i.e. the file landed on the printer but the printer never transitioned IDLE → PREPARE → RUNNING. **Root cause: `_watchdog_print_start` returned SUCCESS as soon as `subtask_id` advanced.** The subtask_id-as-pickup-signal was added for H2D, which can sit at `FINISH` for ~50 s after accepting `project_file` before flipping to PREPARE (#1078) — but it's strictly a "command landed" signal, not "actually printing". When the printer accepts the file but then wedges (cloud+LAN re-auth dance after a power cycle, old firmware, partial network outage), the watchdog returned success, the queue row stayed at `status='printing'`, the in-memory `_expected_prints` entry stayed registered (TTL is 2 hours and only clears the dict, not the DB row), and every subsequent queue item was blocked because the printer was still "in flight". This reporter's firmware (01.07.00.00, current is 01.08.x+) and `bambu_cloud_token`-enabled cloud+LAN mode make the post-power-cycle wedge measurably more likely on their box, but the queue-wedge bug applies to any printer that accepts a file but stalls before starting. **Fix: split the watchdog into two phases.** Phase A (up to `timeout`, default 90 s, unchanged behaviour) waits for either an active-state transition OR a `subtask_id` advance — if neither happens the publish was lost on a half-broken MQTT session (#887/#936) and we revert + force-reconnect (the original #967 recovery path). Phase B (new, up to `phase_b_timeout`, default 180 s) only runs when Phase A exited via subtask_id-alone: keep watching for the active-state transition. 180 s is ~3.5× the worst observed H2D FINISH → PREPARE delay (#1078), so the H2D path stays green. If Phase B times out the queue item is reverted to `pending` so the user can retry without restarting Bambuddy — and Phase B explicitly does NOT force a MQTT reconnect because subtask_id-advance proves the project_file landed and a forced reconnect mid-parse triggers 0500_4003 (#1150). Phase A's existing `gcode_file`-changed discriminator (#1150) stays put for the no-subtask-id-advance case. **Tests:** `test_scheduler_watchdog.py` 14 cases (up from 13) — the #1078 H2D regression test rewritten to step the status through Phase A (subtask_id advance with state=FINISH) then Phase B (state flips to RUNNING) and pin success; new `test_reverts_when_subtask_advanced_but_state_never_active` pins the #1678 wedge case (subtask_id advances, state stays IDLE for the full Phase B window → revert + NO force_reconnect call); new `test_default_phase_b_timeout_is_180_seconds` pins the new default so a future refactor doesn't silently shrink the H2D headroom. Existing #967 / #1150 / #1370 / disconnect / fallback / discriminator regression coverage all stays green. Wider scheduler + queue + dispatch test surface (305 tests) stays green; ruff clean.

- **Service-worker activate handler no longer hangs first-install browsers (demo site stuck spinner + Firefox Corrupted-Content)** — Reproduced live on the demo platform: a visitor lands on `{session}.demo.bambuddy.cool/`, the Printers page renders, but clicking any sidebar entry sticks the next page on a spinner; only a manual reload recovers. In Firefox the same race surfaces as a "Corrupted Content Error" with `sw.js` stuck in `activating` for the entire session. **Root cause:** the `client.navigate(client.url)` call added to the `activate` handler in `sw.js` (commit `18d534c9`, shipped 2026-06-04 alongside the Orca Cloud landing) was intended to force kiosks running an old SW to reload after a deploy, but its only guard was `client.url && typeof client.navigate === 'function'` — neither distinguishes a first install from an upgrade. On every fresh origin (every demo session is a new subdomain, but also any browser visiting Bambuddy for the first time, or after clearing site data) the activate handler still fired the forced navigation: Chromium raced it against React Router's in-flight SPA mount and wedged the page; Firefox's `event.waitUntil` deadlocked on `await client.navigate(...)` because the SW intercepts its own document fetch while still `activating`, the document load aborts, and the SW never reaches `activated`. The "first install on a never-controlled client" guard the commit's comment claimed simply didn't exist in code. **Fix: split the lifecycle correctly.** `sw.js` activate handler is reduced to cache cleanup + `clients.claim()` (matches the standard PWA lifecycle and lets activation complete in low single-digit ms regardless of in-flight document state). The deploy-pickup reload moves to `sw-register.js`: capture `hadController = !!navigator.serviceWorker.controller` at script load (true ⇔ a previous SW was controlling the document), listen for `controllerchange`, and only `location.reload()` when `hadController` was true. A returning kiosk hits a new deploy → had a controller → reloads as before. A first-install visitor (no prior SW, or hard-refresh, or first demo session) → no controller → no forced navigation → React mount completes cleanly. `CACHE_NAME` bumped `bambuddy-v29 → bambuddy-v30` and `STATIC_CACHE` `bambuddy-static-v28 → bambuddy-static-v29` so existing browsers fetching the new `sw.js` drop the old CacheStorage in the same pass — without the bump the SW file byte content might equal the cached one and the upgrade installs nothing. The SpoolBuddy-kiosk unregister branch at the top of `sw-register.js` is unchanged (still wipes registrations on `/spoolbuddy` paths). The `notificationclick` handler in `sw.js` (open-tab-on-push) still uses `client.navigate(url)` — different code path, unrelated, unchanged.

- **VP archive/queue names with `&` no longer render as `&amp;amp;` + tooltip corrected for BambuStudio 2.7.x reality (#1658 follow-up, reported by @IndividualGhost1905)** — Two bugs surfaced on the same screenshot set: (A) Metadata-mode archive and queue names showed `PCB Vise &amp;amp; Solder Station` where the 3MF's Title metadata is `PCB Vise & Solder Station`. **Root cause:** `ThreeMFParser._parse_3dmodel` (`backend/app/services/archive.py:495-538`) parsed the XML `<metadata name="Title">…</metadata>` payload via regex and stripped whitespace but never called `html.unescape()`. The raw `&amp;` landed in the DB; React then auto-escaped the `&` again on render, producing `&amp;amp;`. The sibling parser `ProjectPageParser` (line 754) already had a loop-until-stable unescape and a comment explaining why ("content is often triple-encoded" — observed BambuStudio behavior), the makerworld-fields path just didn't share it. **Fix:** module-level `import html` and the same loop-until-stable unescape pattern in `_parse_3dmodel`, applied uniformly to all `<metadata>` values so `Title`, `Designer`, and any future fields all get peeled the same way. The loop terminates as soon as `html.unescape()` stops changing the string, so single-, double-, and triple-encoded payloads all converge to the correct value; plain ASCII passes through untouched. (B) Filename-mode showed the slugified project title (`PCB_Vise_&_Solder_Station`) instead of the user-typed Send-dialog text ("Main Parts"). **This is NOT a Bambuddy bug** — BambuStudio source confirms it. `PrintJob.cpp:314-325` (`src/slic3r/GUI/Jobs/PrintJob.cpp`) reads `BBL_DESIGNER_MODEL_TITLE_TAG` (defined as `"Title"` in `bbs_3mf.hpp`) from the 3MF, slugifies it (space → `_`, unusable chars `<>[]:/\|?*"` → `_`, collapse runs of `_`, truncate to 100 chars), and **unconditionally overwrites** the user-typed `m_project_name` with it before sending. `params.project_name` becomes both the FTP filename and the MQTT `subtask_name`. The user-typed string never leaves BambuStudio when a Title metadata exists — there is no MQTT field carrying it, so Bambuddy has no recovery path. The previous tooltip ("handy if you renamed the job in the 'send to printer' dialog") promised something BambuStudio strips, and the previous reply to the reporter dismissed this as "OrcaSlicer-style upload, working as designed" which was wrong on BambuStudio 2.7.1.57. **Fix:** tooltip rewritten in all 11 locales (de / en / es / fr / it / ja / ko / pt-BR / tr / zh-CN / zh-TW) to spell out the BambuStudio behavior — both modes often produce the same string because BS overwrites the Send-dialog name with the 3MF Title field when present. **Tests**: 3 new in `test_archive_service.py::TestThreeMFMetadataHTMLUnescape` — `Title` with `&amp;` unescapes to `&` (the reporter's exact case), `Title` with triple-encoded `&amp;amp;amp;` peels all three layers (the BambuStudio worst-case ProjectPageParser already documents), plain `Title=Benchy` passes through unchanged (regression guard against accidentally munging non-encoded payloads). Full 104-test archive suite green; ruff clean; i18n parity holds (5065 leaves × 11 locales); frontend build clean.

- **FTP passive-port pool now sliced per-VP (10 ports each) so bridge-mode Docker drops from ~3.5 GB to ~210 MB host RAM (#1646, reported by @TheFou — followed up with corrections we acted on)** — Reporter on a Linux Docker VM (`network_mode: host` not viable because other containers already bind the same ports) measured 2002 `docker-proxy` host processes spawned from the previously-exposed `50000-51000:50000-51000` range — one process per port per address family, ~3.5 MB RSS each, ~3.5 GB total that doesn't show up in `docker stats` because it's host-level not container-level. **Root cause: shared port pool, treated as symptom not cause.** `VirtualPrinterFTPServer` exposed `PASSIVE_PORT_MIN/MAX` as **class constants** (`backend/app/services/virtual_printer/ftp_server.py:573-574`), so every VP's FTP session passed the same `(50000, 51000)` range into `_bind_passive_port` and competed on the same 0.0.0.0 binds. The widening from 100 → 1001 ports in an earlier round had been collision-avoidance headroom for multi-VP-on-shared-bind, but the cost was paid by every install — including the reporter's single-VP install that only ever needed ~10 ports of headroom. **Fix: per-VP non-overlapping slices, allocated by VP id.** New module-level `compute_passive_port_slice(vp_id) → (port_min, port_max)` returns a 10-port window: VP id 1 → 50000-50009, VP id 2 → 50010-50019, …, VP id 100 → 50990-50999. Class constants are gone; `VirtualPrinterFTPServer.__init__` now takes `passive_port_min` / `passive_port_max` instance args. `manager.py` computes the slice at server-construction time from `self.id` and passes it in. Result for the reporter (single VP): 10 exposed ports → 20 docker-proxy processes → ~70 MB instead of ~3.5 GB. Three VPs → 30 ports → ~210 MB. **Wrap-around behaviour pinned**: VP ids beyond `PASSIVE_MAX_SLOTS = 100` wrap modulo 100 (an install that's churned through many VPs over time still produces a valid in-range slice). A same-slot collision (vp_id 101 lands on the same slice as vp_id 1) falls back to the per-session 10-attempt random retry that pre-#1646 code already had — same recovery, no regression. **Compose default narrowed**: `docker-compose.yml` now exposes `50000-50029:50000-50029` by default (covers 3 VPs out of the box) instead of the 1001-port range. The comment explains how to widen for more VPs (`50000-500N9` for `N = vp_count - 1`) and that proxy-mode VPs still need `50000-50100:50000-50100` because proxy mode forwards the real printer's full range — that codepath uses a separate `TCPProxy.FTP_DATA_PORT_MIN/MAX` and isn't sliced (the real printer owns that range, not Bambuddy). **Doc corrections in the same drop**: the previous warning over-stated `userland-proxy: false` as "confirmed by the reporter" — TheFou had flagged it as theoretical, not tested; the new comment doesn't push it as a recommendation at all (it's a global daemon flag, too blunt for a per-container problem). The new comment also explicitly names Linux multi-service hosts (NAS, dedicated Docker VMs, Unraid, Synology DSM) as a primary bridge-mode audience instead of leaving the warning under a "macOS/Windows" framing that TheFou pointed out missed his use case. Acknowledges that host-mode default is a deliberate trade-off for SSDP discovery, not a security-blind default. **Tests**: 10 new in `test_vp_ftp_port_slicing.py` — `compute_passive_port_slice` pins: vp_id=1 starts at base, consecutive vp_ids get adjacent non-overlapping slices, no two distinct vp_ids within MAX_SLOTS share a port (exhaustive across all 100 slots), wraps modulo MAX_SLOTS, top slot stays within the documented pool, non-positive vp_ids clamp to slot 0 (defensive — never produce a negative port that would crash `asyncio.start_server`). Two `VirtualPrinterFTPServer` instance tests pin: two instances constructed with different slices stay independent (regression guard against re-introducing class-level state), default-arg construction yields a valid one-slice window. Existing proxy-mode test at `test_virtual_printer.py:2269` (101 ports for `_ftp_data_proxies`) stays green — that path is unchanged. Full 130-test VP suite green.

- **Print Log "User" column now shows the user for prints started from the Queue (#1670, reported by @JmanB52D)** — Reporter on a P2S with auth enabled, Virtual Printer in Queue mode and Auto-dispatch off: a user uploads a `.3mf` to the VP (FTP, anonymous), then logs into Bambuddy and clicks ▶ on the staged queue item to start it; the print finishes and the PrintLogEntry's User column is blank. Same setup with the VP in Archive (slicer-initiated) mode correctly attributes the user. **Root cause: two-link gap on the Queue→manual-start dispatch path.** (a) `POST /queue/{id}/start` (`print_queue.py:1039`) auth-protected, but the route's user dep was bound to `_` and discarded — the clicker was never recorded. (b) `PrintScheduler._start_print` (`print_scheduler.py:1886`) dispatches the queue item directly and never calls `printer_manager.set_current_print_user(...)`. The print-complete callback (`main.py:3513`) reads `_print_user_info = printer_manager.get_current_print_user(printer_id)` — which is only ever populated by `background_dispatch.py:747/943` (the Archive→Print and Library→Print flows). Queue dispatch had no equivalent hop, so `_print_user_info` was always `None` and the PrintLogEntry's `created_by_username` landed `NULL`. **Fix (two-sided):** (1) `print_queue.py /start` now binds the auth dep to `user: User | None` and writes `item.created_by_id = user.id` when `user is not None AND item.created_by_id is None` — credits the clicker on VP-uploaded (unattributed) items without overwriting existing attribution from UI-added queue items (matches the standard "first claim wins" ownership rule in `auth.py::require_ownership_permission`). (2) `print_scheduler.py` gains a small `_propagate_owner_to_printer_manager` helper, called from `_start_print` immediately after `register_expected_print`: when `item.created_by_id` resolves to a real User row, it forwards `(printer_id, owner.id, owner.username)` into `printer_manager.set_current_print_user`. No-ops cleanly when the item has no owner (auto-dispatched VP items intrinsically) or when the user row is missing (e.g. user deleted between queue-add and dispatch — the print log row falls back to un-credited rather than crashing the dispatch). **Tests:** 6 new in `test_queue_start_user_attribution.py` — three route tests pin (a) authenticated `/start` writes `created_by_id` on an unattributed item, (b) an existing owner is preserved when a different user clicks `/start`, (c) auth-disabled leaves `created_by_id=NULL` (no synthetic placeholder user invented); three helper tests pin (d) the propagation forwards the resolved username into `set_current_print_user`, (e) a `None` owner is silently skipped, (f) a missing User row is silently skipped instead of raising. Full 63-test `test_print_queue_api.py` suite stays green. Backend ruff clean.

- **AMS drying popover's "Start Drying" button is no longer hidden behind iOS Safari's bottom URL bar on iPhone (#1669, reported via in-app bug report, iPhone 17 Safari)** — Reporter could see the temperature / duration sliders and the "Rotate spool during drying" checkbox but couldn't reach the orange Start Drying button at the bottom of the popover — only a thin sliver of it was visible just above Safari's URL bar. **Root cause:** the popover sizes its `maxHeight` against CSS `100vh` (`PrintersPage.tsx:5443`) and positions itself using `window.innerHeight` (via `computePopoverPosition`, `popoverPosition.ts:53`). On iOS Safari both of those report the **layout** viewport — the full screen ignoring the bottom URL/toolbar overlay — not the visual viewport. The popover therefore extends *behind* Safari's bottom toolbar and the footer button gets clipped. Earlier iterations of the same surface (#1447 popover-off-bottom, #1458 footer-scroll-reachability) fixed desktop / normal-viewport cases but assumed `100vh` matched the visible viewport. **Fix:** two-line change. (a) `frontend/src/pages/PrintersPage.tsx:5443` switches `maxHeight: calc(100vh - …)` → `calc(100dvh - …)` so the dynamic viewport units shrink with iOS toolbars. (b) `frontend/src/utils/popoverPosition.ts:53` defaults `viewportHeight` from `window.visualViewport?.height ?? window.innerHeight` so the flip-above decision also uses the actually-visible area; the existing optional override still wins (tests keep their explicit viewport values). Result: when the iOS toolbar is up, either the popover flips above the trigger earlier (visualViewport too short for below-placement), or the body scrolls within a capped maxHeight and the `shrink-0` footer stays pinned to the visible bottom — the Start Drying button is reachable in both cases. **Tests:** 3 new in `popoverPosition.test.ts::computePopoverPosition (#1669)` — flip-above triggers when visualViewport.height (700) is shorter than innerHeight (800) and the trigger position would only overflow under the visual viewport; falls back to innerHeight when visualViewport is unavailable (older WebViews / jsdom); an explicit `viewportHeight` override still wins over a configured visualViewport.height (test-injection contract). 8 pre-existing tests stay green. dvh / svh browser support — Safari 15.4+, Chrome 108+, Firefox 101+ — comfortably covers iPhone 17 Safari and every supported desktop browser; no behavioural change on non-iOS.

- **Print queue `require_previous_success` no longer cascades indefinitely after a user-cancelled print (#1667, fully root-caused by @599w6c26tv-droid)** — Reporter on an A1 saw a single user-cancelled print block 18 downstream queue items over 3 days, all marked `skipped` with `Previous print failed or was aborted`. They captured the override log line proving Bambuddy correctly detects the cancellation (`Overriding status 'failed' -> 'cancelled' for printer 1 (print was stopped from queue by user)`) but the scheduler's gate ignored the override; they dumped the affected DB rows confirming the cascade pattern; and they reproduced from clean state in one cycle. Two distinct bugs in one function (`PrintScheduler._check_previous_success` in `services/print_scheduler.py`): **(a)** The lookback query `.in_(["completed", "failed", "skipped", "aborted"])` excluded `cancelled`, so a user cancellation was never found as the most-recent predecessor — the query walked past it to whatever real outcome existed before. **(b)** The same lookback INCLUDED `skipped`, so once one item got skipped (under any reason — bug-cascaded or genuinely failure-gated) it became the next item's "failed predecessor" and the cascade compounded. **Fix:** swap the lookback list to `["completed", "failed", "cancelled", "aborted"]` and broaden the success check to `prev_item.status in ("completed", "cancelled")`. A user cancellation is a deliberate action — treating it as neutral matches the user's intent ("I'm done with that one, move on"); `skipped` is excluded so the query always walks back to the most recent REAL print attempt and `failed` / `aborted` still gate as before. **Conservative recovery migration**: a one-shot pass in `core/database.py::run_migrations` resets only the skipped items whose immediate real predecessor (by `completed_at` desc, excluding the skipped-cascade itself) was `cancelled` — same fingerprint as the bug, narrow enough not to disturb skipped items whose true predecessor was a real `failed` / `aborted` print. Items match on `status='skipped' AND error_message='Previous print failed or was aborted'` and the predecessor check via correlated subquery; logged per-row at INFO so operators can audit the count after upgrade. Portable across SQLite and Postgres. Idempotent (post-reset rows no longer match). **Tests**: 10 new behaviour tests in `test_check_previous_success.py` pin every status/cascade combination — bug A (cancelled → True), bug B (skipped walked past), the reporter's exact failed→cancelled→skipped→skipped→pending cascade, regression guards on real failed / aborted still gating, edge cases (no-predecessor, only-skipped history, completed-then-failed). 7 new tests in `test_cancellation_cascade_recovery_migration.py` pin the migration — skipped-after-cancelled resets, skipped-after-failed stays, skipped-after-aborted stays, different-error-message untouched, reporter's multi-item cascade resets all, idempotent on re-run, per-printer isolation. All green; full scheduler + migration test suite stays green.

- **Firmware-update check no longer 403s against Bambu Lab's Cloudflare-gated download page (#1666, reported by @arekm, with the working bypass demonstrated)** — Reporter on a fresh install hit `Could not reach Bambu Lab's firmware download page...` when checking firmware for an A1 Mini, and surfaced the diagnostic: `curl -H 'User-Agent: Bambuddy/1.0' https://bambulab.com/en/support/firmware-download/all` returns `HTTP 403 cf-mitigated=challenge` — Cloudflare upped the bot-protection on `bambulab.com` to a JA3 / TLS-fingerprint challenge. Plain Python TLS handshakes (httpx, requests, urllib) don't match Chrome's ClientHello bytes, so CF rejects before the request reaches the app layer. The `Accept` / `Accept-Language` header workaround we shipped for #1350 was below-HTTP and no longer enough. Existing users with a `build_id.json` on disk from a previous successful fetch kept working until Bambu rebuilt the page (every few weeks); fresh installs and wiped data dirs hit the wall immediately — exactly the reporter's path. **Fix: use `curl_cffi` for the two `bambulab.com` fetches only.** New dependency added to `requirements.txt`; `firmware_check.py` lazy-initialises a `curl_cffi.requests.AsyncSession(impersonate="chrome", ...)` for the `bambulab.com` calls (the index page that carries the Next.js `buildId`, and the per-model `_next/data/{buildId}/.../{api_key}.json` endpoint). Smoke-tested end-to-end against the live page: returns 200 OK + valid `buildId`, vs the reporter's 403. **Compliance framing matters here**: per the Bambu-compliance email from 2026-05-12, Bambuddy committed to "no falsified client identity." `curl_cffi`'s Chrome impersonation only governs TLS handshake bytes — the **HTTP-layer User-Agent is overridden back to `Bambuddy/1.0 (+https://github.com/maziggy/bambuddy)`** via the session's `headers=` parameter. Defensible read: TLS fingerprint matches Chrome (necessary because Python's TLS is the signal CF gates on), but every application-layer identity remains honestly Bambuddy. A new test (`test_bambulab_curl_cffi_session_keeps_honest_user_agent`) pins this — a future refactor that drops the `headers=` override would silently revert to curl_cffi's Chrome-default UA and break the compliance commitment; the test fails on any non-Bambuddy UA in the session. **Soft dependency**: if `curl_cffi` fails to import (rare platforms, alpine without wheels, etc.), the service logs a one-time warning at startup and falls back to httpx; wiki-based version detection continues to work for the badge, only the in-app firmware download URL stops resolving. New test `test_bambulab_get_falls_back_to_httpx_when_curl_cffi_missing` pins the fallback path. The wiki path (`wiki.bambulab.com`) and the CDN download path (`public-cdn.bblmw.com`) stay on httpx — neither sits behind the same JA3 gate. Three existing tests (`test_build_id_is_persisted_to_disk`, `test_build_id_falls_back_to_disk_on_403`, `test_download_page_unreachable_flag_set_on_403_json`, `test_download_page_retries_once_when_buildid_stale`) updated to mock `_bambulab_get` instead of the raw httpx client — a tighter mock target that's stable across the curl_cffi / httpx switch.

- **Background asyncio tasks no longer get garbage-collected mid-flight (#1648 follow-up)** — Support-bundle review under #1648 surfaced 94 `Task was destroyed but it is pending!` warnings in 8 days of v0.2.4.5. **Root cause:** asyncio holds only a weak reference to the result of `create_task` — any "fire and forget" call site that doesn't store the returned task lets the event loop GC the task before it finishes. The warning gives no traceback, so the originating exception (if any) vanishes silently into a support bundle that looks scary but isn't actionable. **Fix:** new `backend/app/core/tasks.py::spawn_background_task(coro, *, name=None)` helper that stores a strong reference in a module-level set, attaches a done-callback that auto-removes on completion AND surfaces any uncaught exception via the logger with the originating traceback, and accepts a `name=` argument so a leak source is traceable in `/tracebacks` and the log line. **Migration:** the 16 truly-orphan `asyncio.create_task(...)` call sites — across `main.py` (8), `printers.py`, `print_queue.py`, `firmware_update.py`, `archive.py`, `print_scheduler.py`, `library.py`, `smart_plugs.py`, `discovery.py`, `smart_plug_manager.py` (3), and `background_dispatch.py` (2 lambda-wrapped) — switched to `spawn_background_task`. Other `create_task` sites already kept strong refs via `self._tasks.append(...)`, `self._x_task = ...`, or local `await`/`gather` and stay unchanged. **Tests:** 5 unit cases in `test_tasks.py` pin the contract — strong-ref retention through completion, set-shrinkage after done, uncaught exception logged at WARNING with `exc_info`, cancellation does not log (a shutting-down service is not an error), and named tasks propagate `name=`. Net result: support bundles stop showing the opaque GC warnings, and any silent fire-and-forget exception now reaches the logger with a traceback attached. Severity reclassification of unrelated noise (the 791 "Failed to get cloud preset 400" spam, the `bambu_cloud.Login failed` mis-ERRORs, etc.) is a separate follow-up.

- **Home-page filament assign no longer leaves the slicer unaware of PFCN cloud presets (#1648, reported by @ferch-G)** — Reporter on an H2D with a Polymaker spool noticed that assigning the spool from the Dashboard left the slicer's filament dropdown showing "unknown" / generic, but clicking Configure right after made the slicer recognize it correctly — "Configure" felt like a mandatory follow-up step rather than a refinement. **Root cause: PFCN-prefix cloud preset IDs were never handled.** Bambu's cloud uses three preset-ID shapes: `GFS…` (official Bambu), `PFUS…` (cloud user-created), and `PFCN…` (cloud shared / partner-uploaded — e.g. Polymaker's "(Custom)" Bambu Lab H2D variants like the reporter's `PFCN80e80c1f79db85`). `apply_spool_to_slot_via_mqtt` only routed `GFS` and `PFUS` through the cloud-detail lookup that extracts the real `filament_id`. PFCN slipped past the cloud-lookup branch, fell into the local-preset `int()` parse path, raised ValueError, dropped into `normalize_slicer_filament` which returns any `P`-prefix unchanged, and the raw PFCN landed in `tray_info_idx` — which the printer's calibration table can't index, so the slicer rendered "unknown". The Configure modal rescued each assign because it does its own `getCloudSettingDetail` lookup and writes the resolved `filament_id`. **Fix:** extend the cloud-detail-lookup branch (`inventory.py:129`) and the discard safety net (`inventory.py:223`) to include `PFCN` alongside `GFS`/`PFUS`. After the fix, the same three paths work: cloud-authenticated → real `filament_id` from `detail["filament_id"]` ships as `tray_info_idx` (Polymaker PLA Matte resolves to `GFL05`); cloud unavailable → raw PFCN discarded, slot reuses an existing valid P-prefix preset if material matches; nothing else available → falls through to the spool's generic material id (`PLA → GFL99`). Source comment now lists all three cloud-ID shapes so the next time Bambu invents a new prefix (PFXX, PFYY, …) the maintainer doesn't have to re-derive the structure from a bug report. **Tests:** 3 new integration cases in `test_inventory_assign.py::TestAssignSpoolPfcnCloudPreset` — falls back to generic when cloud unavailable (and pins the no-PFCN-leak invariant), reuses an existing slot's valid P-prefix preset when material matches, and the happy-path cloud lookup that produces a resolved `filament_id` while preserving the original PFCN as `setting_id`. Existing 28 assign-flow tests stay green.

- **Bambu cloud A1 Mini filament / process profiles no longer hidden in AMS slot picker (#1649, root-caused by @technopaw)** — Reporter on an A1 Mini observed that the AMS slot Configure dropdown showed no Bambu / Generic filament profiles; only user-authored profiles surfaced. Mirror in the Profiles tab: filtering by "A1 Mini" left only A1 (non-mini) results. **Root cause: Bambu rolled out a profile rename mid-2026.** The `@BBL <code>` suffix on cloud profiles shifted from the long display form to a terse model code — `Bambu PLA Basic @BBL A1 Mini ...` is now `Bambu PLA Basic @BBL A1M ...` across 106 cloud profiles. User-authored profiles still use the long form (which is why the reporter's custom A1 Mini profile worked, and Bambu PLA Basic happened to render via the `localPreset` always-shown path). Bambuddy's filter compared the extracted token verbatim against the display name (`"A1M".toUpperCase() === "A1 MINI"` is false), so the rename silently stripped every newly-renamed profile from the picker. **Fix: centralized alias-aware match in `frontend/src/utils/slicerPrinterMatch.ts`.** New `PRINTER_MODEL_SUFFIX_ALIASES` table holds the bidirectional `A1 Mini` ⇄ `A1M` mapping (uppercase-normalised, narrow on purpose — wide-net aliasing like `X1` ⇄ `X1C` would silently group truly distinct printers); exported `matchesPrinterModelSuffix(presetSuffix, printerModel)` helper does the case-insensitive compare with alias fallback. Both consumer sites switched to the helper: `ConfigureAmsSlotModal.tsx:586,607` (the AMS slot picker, hit directly + reached from SpoolBuddy's AMS page via `mapModelCode(printer?.model)`), and `slicerPrinterMatch.ts:classifyByBambuName` (the SliceModal Process / Filament compatibility check). Backend `PRINTER_MODEL_MAP` also gains a `Bambu Lab A1M` → `A1 Mini` entry so server-side 3MF printer-model normalization stays consistent if a future 3MF embeds the short form. The structure stays open: when Bambu introduces the next rename, it's a single new row in the alias table — `/api/v1/cloud/settings` is the place to grep, called out in the source comment. **Tests**: 7 new unit cases in `slicerPrinterMatch.test.ts` pin the alias helper (canonical, case-insensitive both directions, A1M ↔ A1 Mini in both orientations, A1M does NOT collapse to A1, A1 does NOT collapse to A1 Mini, unrelated models reject) plus 3 integration cases in `presetCompatibility` (cloud filament `@BBL A1M` matches A1 Mini, cloud process `@BBL A1M` matches A1 Mini, `@BBL A1M` does NOT match A1). 2 new component-level cases in `ConfigureAmsSlotModal.test.tsx`: `@BBL A1M` cloud preset surfaces when picker is for A1 Mini (with `@BBL A1` correctly filtered out), and `@BBL X1C` stays filtered out when picker is for A1 Mini (sanity check against accidental widening). All existing 2062 vitest cases stay green.

- **VP Queue / Archive / Review: Bambu Studio 2.7.x stayed stuck at "Downloading" after Send (#1658, reported by @IndividualGhost1905)** — Reporter on Bambu Studio 2.7.1.57 + X1C reported that sending a model to a Queue-mode VP (with Auto-Dispatch off) left the slicer's send modal stuck at "Downloading" forever; clicking Delete on the queued item didn't release it, and even Auto-Dispatch ON + a successful real print didn't release it. Only toggling the VP off/on cleared the slicer. The deleted-from-queue framing is a red herring — the slicer was stuck *before* deletion, the user just noticed it most when they deleted. **Root cause: the #1280 fix assumed the wrong event order.** The original assumption was MQTT `project_file` → FTP upload → set `gcode_state=FINISH`, and the slicer's "Downloading" UI releases on FINISH. Bambu Studio 2.7.x flipped the Send sequence to FTP `verify_job` → FTP `.3mf` → MQTT `project_file`, so on_file_received's `set_gcode_state("FINISH", …)` fires *first*, then the synthetic `_send_print_response` ack runs and overwrites `_gcode_state` back to `"PREPARE"`. From that point the 1 Hz cached-as-base push stream carries PREPARE forever, the slicer waits for the FINISH transition it'll never see, and the modal sits stuck. **Auto-Dispatch ON is the same bug**: the real printer's gcode_state goes PREPARE → RUNNING → FINISH on its bridge, but `_send_status_report` overrides the cached push's `gcode_state` with the local `_gcode_state` (still PREPARE), so the real state changes never reach the slicer. The fix re-fires `set_gcode_state("FINISH", filename, prepare_percent="100")` from `on_print_command` 1.5 s after the synthetic ack, for every non-proxy mode (queue / archive / review). The 1.5 s window is long enough for the slicer's modal to see at least one PREPARE push on the 1 Hz cycle (so the transition reads as PREPARE → FINISH, matching what the slicer expects) and short enough that the modal feels responsive. Proxy mode is exempt — there the real printer drives the bridge state and a synthetic FINISH would clobber a real PREPARE/RUNNING transition. The scheduler cancels any in-flight timer when a new project_file lands so a slicer that retries doesn't end with two competing FINISH timers. **Tests**: 6 new cases in `test_virtual_printer.py` — schedules on archive (and by extension queue/review), proxy mode does NOT schedule, no-MQTT skip is silent, second `project_file` cancels the first timer, delayed run sets the expected `(state, filename, prepare_percent)` triple, empty filename does not schedule.

- **Finish photo no longer shows the bed already dropped (#1397, reported by @rtadams89, @Jeff-GebhartCA, @MA2ZAK)** — Bambu's end-gcode lowers the build plate as soon as the print completes. Bambuddy's existing finish-photo path captured a fresh camera frame at `gcode_state=FINISH`, by which time the bed was already at the bottom of the chamber — the photo showed the top of the print well below the camera's natural framing, badly framed and sometimes invisible. Earlier capture attempts (at `layer_num >= total_layer_num` while still RUNNING) hit motion-blur because the toolhead was still parking; capturing through the window kept the wrong frame because the latest was always ~2s before FINISH, mid-bed-drop. **The fix sources the photo from a brief Bambu timelapse Bambuddy records on every dispatched print instead.** Firmware stops timelapse recording AFTER the toolhead parks but BEFORE the bed-drop end-gcode runs, so the last frame frames the finished print correctly — verified on N=2 H2C prints by extracting the last frame of two real timelapses (`spoolbuddy_v2.1` and `case_SpoolBuddy`); both showed the print clearly with the toolhead parked off-frame upper-left and the bed at print height, no motion blur. The post-park-pre-drop window is at least ~2 seconds wide on both, so `-sseof -1.0` (seek to last second, skip the literal last frame) is safe against any encoder tail artifact. **Implementation: force-on at dispatch + cleanup after extraction.** `BackgroundDispatchService._resolve_effective_timelapse(db, archive, job)` reads the `capture_finish_photo` setting before each `start_print` call (reprint + library-file flows both wired) and, when the user did NOT opt in to timelapse for this print, overrides `timelapse=True` on the MQTT command + marks the new `PrintArchive.bambuddy_forced_timelapse` column True. User-opted-in timelapses pass through unchanged (no override needed). Migration adds the column branched on `is_sqlite()` for the boolean default (`DEFAULT 0` on SQLite, `DEFAULT FALSE` on Postgres — PG rejects `DEFAULT 0` for BOOLEAN). New module-level `extract_video_last_frame(video_path, output_path)` in `services/camera.py` runs a single `ffmpeg -sseof -1.0 -i <video> -frames:v 1 -q:v 2 -update 1 <out>` subprocess — no full transcode, ~150ms wall time on the dev box. Bounded 15s subprocess timeout that kills the child on hang. Returns False (never raises) on missing ffmpeg / missing video / non-zero exit / timeout. `_capture_finish_photo_from_timelapse(archive_id, archive_dir)` polls `archive.timelapse_path` every 3s for up to 60s — `_scan_for_timelapse_with_retries` runs in parallel and writes that field when the FTP download finishes. When it lands and the file exists on disk, extract the last frame as `finish_<timestamp>_<hex>.jpg`. `_background_finish_photo` now tries the timelapse path first when `timelapse_was_active=True` and no external camera is configured; the existing external-camera / buffered-live-frame / fresh-RTSP-capture chain stays in place as the fallback. **Post-extraction cleanup**: when `archive.bambuddy_forced_timelapse` is True, `_cleanup_forced_timelapse(archive_id, printer_id)` runs after the extractor (regardless of success — the user never asked for a timelapse file and we shouldn't leave debris even if ffmpeg failed): deletes the locally-attached file, clears `archive.timelapse_path`, then walks the four scanner directories (`/timelapse`, `/timelapse/video`, `/record`, `/recording`) trying FTP DELE against the original filename. Best-effort, never raises — a printer that's offline at cleanup time means one orphaned file on the SD card, not a broken Bambuddy flow. **Notification timing**: the photo-task wait_for budget bumps from 45s to 75s when a timelapse was active so the notification carries the correct bed-up photo instead of falling through to the live-cam grab on slow Wi-Fi links; ~30s of added notification latency at worst is the honest tradeoff. **Scope limitation, documented in the camera wiki**: only covers prints dispatched THROUGH Bambuddy (queue, reprint, print-now from File Manager). Prints started directly on the printer's touchscreen, via the Bambu Handy app, or via Bambu Studio's "Send" function bypass `background_dispatch.py`, so the force-on doesn't fire and the live-cam fallback (bed-down) still applies for those. Can add the mid-print `M981 S1 P20000` MQTT toggle in `on_print_start` later if anyone reports it for non-dispatched prints. External-camera users are unaffected throughout: their flow ignores the printer timelapse since external cams have their own framing and don't see one anyway. **Verified on H2C only** (core-XY); needs field verification on bed-slingers (A1, P1S) where the bed-drop kinematic geometry differs. Bed-slinger users invited to the test build to confirm. Setting description rewritten across all 11 locales to drop the "best quality when timelapse enabled" caveat (since Bambuddy now forces it) and call out the "kept-if-you-wanted-it, deleted-otherwise" behaviour. **Tests**: 6 in `test_extract_video_last_frame.py` cover the real ffmpeg happy path against a runtime-synthesised tiny MP4 (testsrc generator, ~3-5 KB, no committed binary fixture), missing source, empty source, ffmpeg-not-present (monkeypatched), nonzero-exit on garbage input, hung subprocess via patched-sleep-binary + tightened timeout. 4 in `test_finish_photo_from_timelapse.py` cover the polling helper with a patched-session fixture (no DB engine): timeout-without-landing, lands-and-extracts, lands-but-extraction-fails, file-materialises-mid-poll. Override + cleanup tests in `test_dispatch_force_timelapse.py` and `test_cleanup_forced_timelapse.py` pin: override fires only when `capture_finish_photo` enabled AND user-timelapse off; user-opted-in timelapse passes through unchanged; cleanup deletes local + clears `timelapse_path` + DELEs remote when forced; cleanup skips when not forced. **Round-2 fixes from field testing (Martin's H2D + X1C queue test)**: (a) the extractor's `-sseof -1.0` seek broke on small-print timelapses — Bambu records one frame per layer change, so a 16-layer cube produces a 0.625 s / 16-frame video and the 1-second seek-from-end went before the start of the file, ffmpeg silently returned frame 0 (empty bed at print start). Switched the extractor to `ffmpeg -i input.mp4 -update 1 -q:v 2 out.jpg` — writes every decoded frame to the same output file (overwriting), so the file left on disk is the last frame regardless of duration. Verified on Martin's actual X1C-2 timelapse: produces the finished red cube with toolhead parked upper-left. New `test_extracts_correctly_from_sub_second_video` regression test pins it against a 0.5 s synthetic MP4. (b) The dispatch-time override only wired into `background_dispatch.py` (Print Now / Reprint flows), but the print *queue* runs through a separate scheduler at `print_scheduler.py:_start_print` which calls `printer_manager.start_print` directly. Refactored the resolver to a module-level `resolve_effective_timelapse(db, archive, user_wanted_timelapse)` function and wired it into the scheduler's call site too. New `test_scheduler_force_timelapse_wiring.py` walks the scheduler's AST and asserts the `start_print(timelapse=...)` kwarg references `effective_timelapse` (not `item.timelapse`) — guards against future refactors silently dropping the override on the queue path.

- **Project edit modal couldn't be scrolled, so Save / Cancel were unreachable on short screens (#1642, reported by @klevin92)** — Reporter on a Pi-class display (1508 × 831) couldn't mark a project as Completed because the edit modal's height exceeded the viewport and there was no way to scroll: outer wrapper was `fixed inset-0 flex items-center justify-center p-4` (vertical-center) and the inner card had no `max-h` and no `overflow`. The top of the form went above the viewport and the bottom — including the Status dropdown the reporter was trying to use plus both action buttons — went below it. Workaround was a full page reload to drop the modal. Standard flex-modal-scroll fix: `max-h-[calc(100vh-2rem)]` + `flex flex-col` on the card (the `2rem` accounts for the outer `p-4`), a `flex-1 overflow-y-auto min-h-0` wrapper around the form fields, and the Cancel / Save buttons moved into a `flex-shrink-0` sibling with a `border-t` separator so they become a sticky footer that's always visible regardless of scroll position. The buttons stay inside the `<form>` so `type="submit"` still works. 2 new vitest cases in `ProjectsPage.test.tsx` pin the structural fix: the Save button is NOT a descendant of the `overflow-y-auto` region (otherwise it would scroll off again) and the modal card carries the `max-h-[calc(100vh-2rem)]` cap. Other modals in the codebase with the same `fixed inset-0 flex items-center justify-center` + `max-w-md` shape almost certainly have the same latent bug — not refactored here, will tackle when reported.

- **VP MQTT bridge `net.info[].ip` rewrite never armed when the printer was added by hostname/FQDN (#1429, root-caused by @Mape6, also hit @TrickShotMLG02)** — Reporter on a flat 192.168.3.0/24 LAN had added a P1S to Bambuddy by its router-provided DNS name `p1s.fritz.box` instead of its IPv4. On 0.2.4+ that one detail kept Bambu Studio Send going to the real printer instead of the Bambuddy archive whenever the printer was powered on — exact same surface symptom #1429 was originally about, but a separate root cause from the bind-IP encoding work shipped on 2026-06-02. The defensive `NOT armed` logging ([[issue1429_vp_ip_leak]]) added in this release pinpointed it on the reporter's bundle: `MQTT bridge IP encoding NOT armed: invalid IPv4 (target='p1s.fritz.box', vp='192.168.3.27'): invalid literal for int() with base 10: 'p1s'`. The encoder `_ip_to_uint32_le` (and the host-interface picker `find_interface_for_ip`) both assume dotted-quad IPv4 and bail on anything else, so `BambuMQTTClient.ip_address` being the configured FQDN string short-circuited the rewrite path and `net.info[*].ip` kept leaking the real printer's IPv4. Switching the printer record to an IPv4 cleared the issue immediately for the reporter — that workaround confirms the diagnosis exactly. **Why this didn't bite pre-0.2.4**: the bridge didn't do `net.info[].ip` rewriting at all before #1429 shipped, so FQDN-configured printers worked by accident — nothing was trying to parse the host as IPv4. **Fix** adds `_resolve_target_to_ipv4(target)` in `mqtt_bridge.py`: pass-through when `target` already parses as `ipaddress.IPv4Address`, otherwise `socket.getaddrinfo(target, None, family=socket.AF_INET)` to filter to IPv4-only (the `net.info[*].ip` field is uint32 LE — there's no IPv6 representation that fits, so an AF_INET6 result must not slip through). Returns `None` on empty input *and* on `OSError` from getaddrinfo so transient DNS hiccups don't break the encoding permanently; `_refresh_ip_encoding` falls back to the existing `NOT armed` throttle which re-resolves on every 30s refresh tick (DHCP / DNS churn picks itself up). Both the `_ip_to_uint32_le(target_ip)` call AND the `_resolve_host_interface_for_target(target_ip)` call now receive the resolved IPv4, so the same fix covers the bind-address auto-resolve path used on default-config (0.0.0.0 bind) installs that don't have a dedicated VP bind IP. The configured FQDN is preserved into the armed log line as `configured→resolved` (`target=p1s.fritz.box→192.168.3.153`) so a bad-DNS regression stays legible in `docker logs` without grepping back to the not-armed lines. The unresolvable-input not-armed reason is now `could not resolve printer host '<input>' to IPv4 (invalid address and DNS lookup failed)` — names the actual configured value, not just `invalid IPv4 (target=...)`, so future bundles distinguish "DNS gave us a v6 address" from "user typed garbage" without a guess. **Tests**: 5 new in `TestHostnameResolution` (pass-through for IPv4, empty/None → None, FQDN → resolved IPv4 with AF_INET filter asserted, `OSError` → None, end-to-end FQDN-targeted bridge arms with the resolved IPv4 in `_target_ip_uint32_le` and the `configured→resolved` shape in the armed log). The existing `test_invalid_ipv4_logs_value_error` renamed to `test_unresolvable_target_logs_reason` and now patches `getaddrinfo` to `OSError` so the test is hermetic; asserts the new `could not resolve printer host 'not.an.ip'` message. 49 bridge tests pass; ruff clean.

- **MakerWorld URL imports into a writable external folder wrote bytes to internal storage, not the NAS (#1645, reported and root-caused by @needo37)** — Reporter linked a writable external SMB folder, selected it as the destination in the MakerWorld import dialog, the import succeeded, the file card appeared in the File Manager under the external folder's view — but `ls` on the NAS turned up nothing, and a `find` across the whole NAS and the container for the original filename matched nothing either. The bytes had landed in Bambuddy's internal `<DATA_DIR>/archive/library/files/<uuid>.3mf` instead of `<external_path>/<filename>` on the mount. Root cause was the byte-import save helper `save_3mf_bytes_to_library` at `backend/app/api/routes/library.py:422`: it accepts `folder_id` but never loaded the folder or inspected `is_external` / `external_path`, hardcoded the destination to `get_library_files_dir() / <uuid><ext>`, and left the `LibraryFile` row with `is_external=False`. So the row's `folder_id` pointed at the external folder while its bytes + `is_external` flag both said "managed/internal" — exact same class of bug as #1112 (which got fixed for the multipart-upload and move paths but never applied to the byte-import path). Compounded by the UUID-renamed on-disk copy: searching for the human-readable basename anywhere — NAS or container — never matches. **Fix** is a direct mirror of the multipart-upload path that's done this correctly since #1112: load the target `LibraryFolder` (when `folder_id` is non-None), feed it to the existing `_resolve_upload_destination(target_folder, filename)` helper which already produces `(dest, is_external)` and enforces the 403-read-only / 400-unwritable-or-missing / 409-collision rejections, write the bytes to that destination (real filename for external, UUID for managed), and persist the row via `_stored_file_path(dest, is_external)` + `is_external=is_external`. The route-layer read-only guard at `makerworld.py:256-260` is preserved — it returns the friendlier error before the upstream download burns bandwidth — and `_resolve_upload_destination`'s identical check stays as defence-in-depth for any future caller that skips the route gate. Thumbnails continue to live under the managed `get_library_thumbnails_dir()` regardless of the 3MF's location, matching the upload path. **Tests**: 4 new in `TestImport` (writable external → bytes on mount + `is_external=True` + absolute file_path persisted; read-only external → 403 at route, no download; missing external_path → 400; filename collision → 409 with the pre-existing file's bytes untouched). 21 existing makerworld tests + 72 library-route tests stay green. Ruff clean.

- **X2D archives lose 3MF metadata because FTPS handshake fails on firmware 01.01.00.00 (#1638, reported by @vasmarfas)** — Reporter's first archive entries from a brand-new X2D landed almost empty (only print time visible, no filament weight / layers / MakerWorld link / thumbnail), and Spoolman filament-usage tracking also went silent. The support bundle traces the symptom end-to-end: at print start `backend/app/main.py::on_print_start` tries the usual FTP-download dance for the 3MF, every connect attempt to the printer fails with `[SSL: WRONG_VERSION_NUMBER] wrong version number (_ssl.c:1032)`, and ~2 minutes later `Could not find 3MF file for print: /data/Metadata/plate_1.gcode` → `Created fallback archive N for <name> (no 3MF available)`. The fallback path writes the row with `file_path=""`, `file_size=0`, `content_hash=NULL`, and no layers / filament / model-link fields — exactly the "almost empty card" in the reporter's screenshot. Spoolman tracking and reprint-grouping also degrade from the same root cause: both depend on metadata pulled out of the 3MF by `ThreeMFParser`. The proximate cause is the FTPS handshake: Python 3.13's default `ssl.create_default_context()` negotiates TLS 1.3, and the X2D's implicit-FTPS server on port 990 rejects the ClientHello with `WRONG_VERSION_NUMBER`. This is the same shape of symptom as the P2S 01.02.00.00 FTPS bug from #1401 — handshake / data-channel breakage triggered by the move to Python 3.13's TLS-1.3 default — but the wire-level failure mode is different (P2S completes the handshake and truncates mid-stream with 426; X2D fails the handshake outright). Both are addressed via the per-model registry that #1401 established: `backend/app/services/ftp_profiles.py` gains an `X2D` entry with `cap_tls_v1_2=True` plus a `N6 → X2D` SSDP alias, so the X2D's `ImplicitFTP_TLS` connection caps the SSL context's `maximum_version` to TLS 1.2 and the ClientHello looks like the one the firmware accepted before the Python upgrade. Deliberately conservative — every other model stays on negotiated TLS 1.3, only X2D-tagged sessions flip. **Honest caveat**: this ships as a hypothesis-driven trial rather than a confirmed root-cause fix. The TLS-1.2 cap is the most likely cure given the symptom's family resemblance to #1401, but `WRONG_VERSION_NUMBER` could equally describe the X2D switching to explicit FTPS (AUTH TLS on a plaintext greeting) or moving the FTPS service to a different port — both would need a different code path. The reporter has been asked to test this build; if the cap doesn't clear the error, the registry slot stays useful as a tuning anchor and the next round of diagnostics (`openssl s_client -connect <ip>:990 -tls1_2` from a network-adjacent host) will tell us which of (2)/(3) applies. **Tests**: 3 new in `test_ftp_profiles.py` mirroring the existing P2S coverage — `X2D` resolves to `cap_tls_v1_2=True`, `N6` SSDP code aliases to the X2D profile, lowercase `x2d` still hits the cap. Existing P2S + default + unknown-model + frozen-dataclass + non-capped-spot-check (X1C / H2D / P1S / A1) tests stay green. **Verified**: ruff clean; the integration test at `test_cap_tls_v1_2_actually_applied_to_ssl_context` already pins the profile→`ImplicitFTP_TLS`→`ssl_context.maximum_version` wiring so this entry can't silently fail to apply.

- **Label printing produced two identical PDFs per click (#1628)** — `LabelTemplatePickerModal.tsx::openBlobInNewTab` called `window.open(url, '_blank', 'noopener,noreferrer')` and treated a `null` return as "popup blocked → fall back to `<a download>` click." Per the WindowFeatures spec, `noopener` deliberately forces `window.open` to return `null` even on success, so the `if (!win)` fallback fired on EVERY click. Path 1 (window.open) opened the blob tab — on Linux Chromium without an inline PDF viewer the OS saved a random-named copy (the `zo70GhSL.pdf` / `f7w0OcDi.pdf` files in the reporter's screenshot). Path 2 (fallback) downloaded a second copy named `bambuddy-labels.pdf`. Two identical PDFs per click. Fix: drop `noopener,noreferrer`. The blob is same-origin (created via `URL.createObjectURL` from our own fetch response), the destination is a passive PDF preview tab with no script context to abuse `window.opener`, and `noreferrer` is a no-op for blob URLs. After removal, `window.open` returns a real window reference on success → `if (!win)` only fires on genuine popup-block, single PDF per click. Existing 17 vitest cases in `LabelTemplatePickerModal.test.tsx` still pass; the change is comment + one parameter.

- **Scheduled local backup time is now interpreted as local time, not UTC (#1602 follow-up)** — Pre-fix: the time-of-day picker in Settings → Scheduled Local Backups stored the value as `HH:MM` and `_calculate_next_run` in `backend/app/services/local_backup.py` interpreted it as UTC (`datetime.now(timezone.utc).replace(hour=..., minute=...)`), so a UTC+3 user who wanted a 21:00 local backup had to enter 18:00. The UI hinted at this with a literal "UTC" label, but it was still surprising. Post-fix: the picker is interpreted in the container's local timezone, resolved from the `TZ` env var via `zoneinfo.ZoneInfo` (same source the Support page's `environment.timezone` already shows). UTC fallback when `TZ` is unset or unrecognised — preserves the legacy behaviour rather than crashing. The UI now shows the resolved zone name next to the time field (`Local time (Europe/Berlin)` / `Yerel saat (Europe/Istanbul)` / etc.) via a new i18n key `backup.localTimeHint` with real translations across all 10 non-English locales, replacing the old `backup.utc` literal. New `timezone` field on `/api/local-backup/status` exposes the resolved zone to the UI. **One-time behaviour change for existing users**: anyone who entered a UTC time as a workaround (per #1602's UTC+3 reporter — "I have to write 18:00 to get 21:00 local") will see the first scheduled cycle after upgrade run at their local TZ offset earlier than expected. Re-enter the time as local once and it's correct from then on. No migration is shipped; the population is small and migrating around a DST boundary would be ambiguous. **Tests** (`backend/tests/unit/test_local_backup.py`): existing 5 cases pinned with `monkeypatch.setenv("TZ", "UTC")` so they don't depend on the test runner's TZ; 5 new — Europe/Berlin local→UTC, Europe/Istanbul (the #1602 reporter's zone) local→UTC, no-TZ-env UTC fallback, unrecognised-TZ UTC fallback, DST spring-forward gap (Europe/Berlin 2026-03-29 02:30 wall-clock doesn't exist) asserting no crash. All 30 tests pass. Frontend i18n parity green at 5007 keys across 10 non-English locales.
- **Auto-print end snippets silently dropped on P1S, and modified 3MFs rejected with HMS 0500-4003 (#1516, contributed by @phieb)** — Two compounding firmware quirks made the original #422 G-code injection unusable on the P1S — the most common reporter platform for auto-eject / plate-clear automation. **(1) End snippet dropped after `; EXECUTABLE_BLOCK_END`**: the snippet was appended to the end of `Metadata/plate_N.gcode`, but Bambu firmware (verified on a P1S) does not execute G-code that sits **after** the `; EXECUTABLE_BLOCK_END` marker. An auto-eject sweep injected to clear the plate ran on every other Bambu model but silently no-op'd on P1S — print finished, plate stayed loaded, the next queued copy stalled behind it. The injection now anchors the end snippet **before** `; EXECUTABLE_BLOCK_END` so it sits inside the executed block, after the printer's own machine-end sequence (cooldown / M104 S0 / etc) but before the firmware stops parsing. Files without the marker — older slicer versions, non-Bambu sources — keep the existing append-to-EOF behaviour with a warning log; the test suite pins both paths. **(2) Stale `.gcode.md5` sidecar rejected by P1S firmware**: every plate carries a `Metadata/plate_N.gcode.md5` sidecar that the P1S validates against the gcode body on load. Rewriting the gcode without refreshing the hash made the P1S reject the file with `HMS 0500-4003 "unable to parse"` and abort the print — exactly when the injection had succeeded. `inject_gcode_into_3mf` now recomputes the sidecar from the exact bytes about to be written and re-packs it into the 3MF in the same pass, matching Bambu's on-disk format exactly (uppercase hex, 32 chars, no trailing newline). The MD5 is a firmware integrity check, not a security primitive, so the call is flagged `hashlib.md5(..., usedforsecurity=False)` to keep ruff S324 / Bandit B324 clean. 3MFs **without** an `.md5` sidecar member (older files, manual hand-builds) do not gain one — inventing a member could surprise older firmware that doesn't expect it; if the source had no sidecar the firmware wasn't validating it anyway. Non-target zip members keep their original compression intact (the P1S preview parser chokes on re-DEFLATEd PNGs that the source had stored uncompressed). **Live-tested on a P1S** with `{max_layer_z}` placeholder substitution: injection happens, the file loads cleanly, the end snippet executes, the recomputed hash validates against the modified body. **Tests** (`test_gcode_injection.py`): 4 new cases in `TestMd5SidecarRecompute` (sidecar matches the exact gcode bytes after injection, uppercase-hex-no-newline format parity with Bambu's on-disk shape, no `.md5` member is invented when source lacks one, non-target zip member compression is preserved) + 1 new case `test_end_lands_before_executable_block_end` pinning the in-block placement when the marker is present + 1 case renamed from `test_end_still_appended_at_eof` to `test_end_falls_back_to_eof_without_block_marker` to reflect that EOF append is now the **fallback** path, not the primary one. 198 VP + gcode_injection tests in the slice green; full backend 6167/6167; ruff clean.
- **Reprint with quantity > 1 + auto-print G-code injection now injects *every* copy, including the first (#1516, contributed by @phieb)** — since auto-print injection landed (#422), ticking **Inject auto-print G-code** in the Reprint dialog only applied to copies 2…N: the first copy was dispatched immediately via the direct reprint path, which bypasses the scheduler that performs injection, so it printed *without* the start/end snippets. For auto-eject / plate-clear setups (Farmloop, SwapMod, AutoClear, Printflow 3D) this left the first copy stuck on the plate, blocking the injected copies queued behind it. When injection is enabled and quantity > 1, the Reprint flow now queues *all* copies so each one is dispatched — and injected — by the scheduler. Behaviour with injection off is unchanged (first copy still prints immediately, the rest queue), as are the single-copy reprint, Add-to-Queue, Edit-queue-item, and stagger paths.

## [0.2.4.5] - 2026-06-03

### Added
- **System theme detection — sidebar toggle and Settings selector follow OS dark/light preference (#1418, contributed by @TempleClause via PR #1501)** — `ThemeMode` gains a third value `'system'` alongside the existing `'dark'` / `'light'`. The provider listens to `window.matchMedia('(prefers-color-scheme: dark)')`, tracks the OS preference in real time, and exposes a new `resolvedMode: 'light' | 'dark'` to consumers — the actual rendered theme after resolving system → OS preference. Layout's sidebar toggle now cycles `dark → light → system → dark` with the icon hinting at the next stop (`Sun`→`Monitor`→`Moon`); the existing logo selection and the dark/light "active" panel highlight in Settings switched from `mode` to `resolvedMode` so they always reflect what's actually painted, regardless of whether the user chose explicitly or inherited from the OS. Settings → Appearance gained a 3-button Dark / Light / System selector (border-green-keys-off-`mode` so System actually highlights System even when it resolves to dark), with a "Settings saved" toast on click matching the adjacent Background/Accent/Style selects. Existing users' persisted `theme-mode` is untouched — anyone on `dark` or `light` stays there and simply gains an extra stop in the cycle; new installs default to `dark`. **Review-caught fixes shipped in the same PR**: (a) the project's `__tests__/setup.ts` mocked `window.matchMedia` with `vi.fn().mockImplementation(...)`, which `vi.restoreAllMocks()` in three test files reset to "return undefined" — pre-PR nothing called `matchMedia` at render time so the wipe went unnoticed, this PR was the first caller and broke 23 existing tests. Rewritten as a plain function (`Object.defineProperty(window, 'matchMedia', { writable: true, value: (query) => ({...}) })`) so `restoreAllMocks` can't touch it. (b) `themeToggleHint` had previously only been updated in `en.ts`; real translations now ship in all 8 non-English locales (de/es/fr/it/ja/pt-BR/zh-CN/zh-TW) describing the 3-state cycle without referencing the old sun/moon icon pair. (c) PR description reworded to honestly call out the sidebar cycle change as a behaviour change for every user of the toggle (`dark → light → system` now intercepts where users previously got `dark → light → dark`), with the persisted-preference-unchanged caveat made explicit. (d) New i18n key `nav.switchToSystem` with real translations across all 9 locales (`'Switch to system mode'` / `'Zum Systemmodus wechseln'` / `'システムモードに切替'` etc.). **Tests**: 11 new in `ThemeContext.test.tsx` (systemPreference inits from `matchMedia.matches`, change event updates state, resolvedMode follows explicit mode vs systemPreference per `mode` value, dark class applied based on resolved mode, `toggleMode` cycles dark→light→system→dark); 1 new in `Layout.test.tsx` (toggle button title attribute walks the cycle); 4 new in `SettingsPage.test.tsx` (all three buttons render, active green border keys off `mode`, click switches mode, click fires toast). 26 previously-broken tests in `AddNotificationModal.test.tsx` + `NotificationProviderCardStockAlerts.test.tsx` + `CameraTokensPage.test.tsx` pass again post-`setup.ts` fix. Frontend build clean (2682 modules); i18n parity green at 4995 keys × 9 locales (+1 from `switchToSystem`). Contributor handled the entire round-1 review (matchMedia mock, locale parity, PR honesty, full test coverage, toast parity, `.map()` refactor for the button group) in a single revision push, no follow-ups deferred.
- **MQTT auth rate-limit on the virtual printer** — Bambuddy's VP exposes an 8-char access code via the slicer-facing MQTT server on port 8883. Without a rate limit the code is brute-forceable by anyone who can reach the VP's bind IP (LAN, Tailscale, or any other tunnel the user chose to expose). The new per-IP limiter records each failed CONNECT auth attempt and rejects further CONNECTs from that IP once 5 failures occur within a 60 s window. The window is sliding (not cumulative), recovers automatically after expiry — no manual unblock — and successful auth clears the IP's prior failure history so a user who fat-fingered their code 3 times then got it right isn't penalised on their next reconnect. Per-IP tracker uses `time.monotonic()` so wall-clock jumps can't extend or shorten the window unexpectedly. Constants `_AUTH_RATE_LIMIT_MAX_ATTEMPTS = 5` and `_AUTH_RATE_LIMIT_WINDOW_SECONDS = 60.0` are module-level for ops tunability. 5 unit tests in `test_vp_mqtt_server.py::TestAuthRateLimit` pin the under-limit/at-limit/window-recovery/multi-IP/success-clears semantics.
- **Per-slicer MQTT response routing for multi-slicer VP setups** — Pre-fix: when slicer A sent `extrusion_cali_get` (or any other bridge-forwarded command) to a non-proxy VP bound to a target printer, the printer's response was fanned out to **every** connected slicer — leaking slicer A's response into slicer B's command stream. Slicers ignore responses to sequence_ids they didn't send, but the leak is still wrong and could confuse multi-slicer-host setups (workstation + laptop both connected to the same VP). The fix records `sequence_id → originating client_id` in `SimpleMQTTServer._pending_requests` on the way out and looks it back up in `push_raw_to_clients` on the way in, routing the response only to that one client. Falls back to broadcast for printer-initiated unsolicited pushes (push_status etc. — every slicer expects these) and for sequence_ids the map never saw recorded (covers slicers subscribing mid-flight). Bounded at 256 entries with FIFO eviction so a slicer that sends commands without ever consuming responses can't leak memory. 6 unit tests in `test_vp_mqtt_server.py::TestPendingRequestRouting` cover seq-id capture across nested blocks, lookup-pops-entry semantics, FIFO eviction at cap, malformed-payload fallback, and broadcast on unrecorded seq.
- **H2D Pro virtual-printer support (experimental — needs field confirmation)** — Added SSDP model codes `O1E` and `O2D` to `VIRTUAL_PRINTER_MODELS` and matching `09400A` serial prefixes to `MODEL_SERIAL_PREFIXES` so the H2D Pro shows up in the Add Virtual Printer model dropdown and advertises a model code distinct from H2D's `O1D`. The codes were transcribed from the project's model-codes reference but have not been validated against a live H2D Pro's SSDP response. Anyone with an H2D Pro who picks this from the dropdown should confirm BambuStudio recognises the VP correctly; if not, the code values need a one-line correction and a follow-up release.
- **VP child-service readiness barrier** — Pre-fix: `VirtualPrinterInstance.start_server` spawned each child sub-service (FTP, MQTT, Bind, SSDP) as a `asyncio.create_task` and returned immediately. `is_running` then reported `True` even though the child sub-services' sockets were still in the gap between `asyncio.create_task(...)` and the inner `asyncio.start_server` returning. A caller racing the start (the diagnostic route, the VP-card UI poll, an integration test) could see `running=pass` while `port_ftps=fail`. Each child now exposes a `ready: asyncio.Event` that's set after the actual socket bind, and `start_server` awaits all of them with a bounded 5 s timeout. If a child hangs binding, the timeout logs a `Sub-service didn't bind within 5s: ...` warning and the VP continues — the existing task-tracking still catches the failure on the next iteration. The 5 s ceiling is well above any legitimate bind on healthy hardware; on a Pi 3 with a congested SD card it's tight but bounded.

### Changed
- **Bug-report template: tightened fields + new Area dropdown to cut invalid-issue triage load** — 170 issues have been closed with the `invalid` label (61 of them in the last 30 days alone — roughly 1 in 5 of all closed issues), nearly always because the reporter hadn't run the in-app diagnostics or checked the documented troubleshooting page. The template now forces engagement with the tools that were already shipped. **Form changes** (`bug_report.yml`): (a) the "I ran the Connection Diagnostic" checkbox flipped from `required: false` to `required: true`, so the form blocks submission until the reporter has actually used the diagnostic (or knowingly lied — higher friction than reading the doc); (b) the Support Package textarea is now `required: true` instead of optional, with the field's prompt rewritten to "Drag the .zip here, or explain why you cannot attach one" so users without a working Bambuddy still have a path; (c) a new required "Troubleshooting steps already taken" textarea sits between Steps to Reproduce and the printer-model dropdown, asking which wiki pages were checked and which in-app diagnostics were run — empty answers can't submit, which produces either real evidence or an admission that nothing was tried (both of which are useful for triage); (d) the pre-form markdown intro now spells out the "search → wiki → diagnostic → support package" sequence with a citation of the 1-in-5 stat so reporters understand the *why* before they reach the fields; (e) the final-checks list grew from one to three required confirmations (searched issues + checked troubleshooting wiki + ran Connection Diagnostic for connection/printing/camera bugs), with the wiki-checked confirmation linking to the rendered troubleshooting page. **Bug categorization** (the gap that motivated the rewrite): the old single `Component` dropdown only carried `Bambuddy / SpoolBuddy / Both` — useless for area triage. Replaced with TWO required dropdowns: `Product` (Bambuddy / SpoolBuddy) and `Area` (15 options covering the actual feature surface — connection, dispatch, filament/AMS, slicer, VP, camera, archives, stats, queue, notifications, auth, updates, UI, integrations, SpoolBuddy kiosk, plus an Other escape hatch). **Auto-labeling** (`.github/workflows/auto-label-area.yml`): on every issue open/edit, an `actions/github-script@v7` step parses the Area dropdown out of the rendered issue body (matching the `### Area\n\nValue` block GitHub forms produce) and applies the matching `area:*` label. Tolerant of CRLF, the `_No response_` placeholder, and the issue-edit re-fire path (won't re-add an already-present label). Unrecognised Area values emit a `core.warning` so missed sync between the form and the workflow map shows up in Actions logs. Maintainer hand-off: 15 `area:*` labels need to be created once via `gh label create` (see commit message for the exact commands) — labels referenced by the workflow but missing in the repo cause the `addLabels` call to throw, so this prerequisite is load-bearing. Printer Model dropdown verified against `PRINTER_MODEL_MAP` in `backend/app/utils/printer_models.py` — all 13 current Bambu models present (X1 Carbon / X1 / X1E / X2D / P1S / P1P / P2S / A1 / A1 Mini / H2D / H2D Pro / H2C / H2S), no update needed. YAML syntax validated via Python `yaml.safe_load` for both the template and the workflow.
- **VP virtual-printer FTP server: cmd_STOR streams chunks straight to disk instead of buffering the whole upload in memory** — Pre-fix: ``cmd_STOR`` accumulated every chunk in a ``list[bytes]`` and called ``write_bytes`` at the end. Peak RSS for a multi-GB ``.gcode.3mf`` (multi-plate dense prints) was ~2× the file size — chunks held + the ``b''.join`` of them — and could OOM-kill a low-memory host (Pi 3, low-end Synology, etc.). The streaming rewrite writes each 64 KiB chunk to ``file_path.open("wb")`` inline as it arrives, bounding peak memory at one chunk regardless of total upload size. Wire protocol unchanged — same ``150 → 226`` sequence, same destination path, no new verbs, no concurrency guard. The visible difference is that the destination file grows progressively rather than appearing all-at-once on completion; slicers don't ``LIST`` during ``STOR`` so this isn't observable. Same change adds a ``MAX_UPLOAD_BYTES = 4 GiB`` hard cap — a runaway or malicious client can no longer drive RSS or disk to exhaustion. On the cap path the partial file is unlinked so a slicer retry starts clean. 4 unit tests in ``test_vp_ftp_stor.py`` (happy-path bytes on disk + 226, cap-violation 426 + partial cleanup, mid-stream read error cleanup, MAX_UPLOAD_BYTES sanity floor).
- **VP virtual-printer FTP passive port range widened from 50000-50100 (101 ports) to 50000-51000 (1001 ports)** — The original range was sized for a single VP. With multiple VPs each running their own FTP server, concurrent passive data connections compete for the 101-port pool and the bind-retry loop's 10 random picks can collide; 1001 ports gives headroom. Only affects the **non-proxy** path (``VirtualPrinterFTPServer.PASSIVE_PORT_MIN/MAX``). The proxy path's ``SlicerProxyManager.FTP_DATA_PORT_MIN/MAX`` stays at 50000-50100 because it pre-binds the printer-side range exactly. Docker bridge-mode users mapping the old range need to update to ``50000-51000:50000-51000`` — `docker-compose.yml`, `install/docker-install.ps1` warning, and the wiki (`docs/getting-started/docker.md`, `docs/features/virtual-printer.md` — port table, two UFW rules, two firewalld rules, Cloudflare-tunnel list, firewall troubleshooting line) all updated with "widened in 0.2.5" notes. Docker host-mode and bare-metal users are unaffected (no port mapping involved). The proxy-mode FTP-data row in the wiki stays at 50000-50100 because that path is unchanged.
- **VP MQTT bridge sticky-keys: 7 more fields preserved across incremental pushes** — Pre-fix: when the bridge cached a real printer's ``push_status``, the very next 1 Hz incremental push (which only carries changed temps / fan / wifi_signal) wiped any field not in the sticky-keys allowlist. The cached state lost ``upgrade_state``, ``xcam``, ``hw_switch_state``, ``nozzle_diameter``, ``nozzle_type``, ``online`` and ``ams_status`` after a single tick — BambuStudio's Send pre-flight reads several of these (``upgrade_state.dis_state`` / ``force_upgrade`` in particular) and could refuse Send because the cached push said "unknown firmware state". Same shape as #1228 (storage indicators) and #1558 (live-progress fields) — the cached-branch field-shape parity, not a new mechanism. Sticky-keys carry-forward is now also a ``copy.deepcopy`` (was reference) so a future merge that mutates a carried-forward dict in place can't corrupt both copies.
- **VP target-printer DHCP IP / serial refresh now restarts proxy VPs** — Pre-fix: when a target printer's IP changed (DHCP renewal, network reconfiguration), the running proxy VP kept forwarding to the stale IP forever because ``sync_from_db``'s "changed" predicate didn't compare ``proxy_ips`` against the running instance's ``target_printer_ip`` / ``target_printer_serial``. The user had to manually toggle the VP to refresh. Now ``sync_from_db`` re-evaluates the proxy target each cycle and restarts the VP when the IP or serial actually changes — same code path as a config change. If the target printer's DHCP lease cycles frequently this means more proxy restarts, but the alternative was silent breakage; documented in the release-notes for users on flaky-DHCP networks.
- **VP queue_force_color_match setting takes effect immediately** — Pre-fix: toggling the per-VP ``Force exact color match`` setting via the UI silently no-op'd because ``sync_from_db``'s "changed" predicate didn't include the field. The user had to restart the process for the new value to land. The predicate now also checks ``queue_force_color_match`` so the running instance gets restarted on toggle.
- **VP MQTT client session errors elevated from DEBUG to WARNING** — The outer ``except Exception`` in ``SimpleMQTTServer._handle_client`` was logging at DEBUG, which production deployments default to suppressing. Users reporting "slicer disconnects randomly" then had no signal to pass us. WARNING surfaces it. Inner handlers' expected parser/IO failures stay at DEBUG — only unexpected errors that would otherwise reach the outer catch get visibility.
- **VP MQTT periodic status push now logs a one-line per-minute counter per active slicer connection (#1548 follow-up)** — ``_periodic_status_push`` emits ``1Hz status push: N pushes/min to <client>`` at INFO level once per minute per connected slicer (silent when no slicer is attached). The 1 Hz status push was previously silent at INFO; when a reporter sent a support bundle showing an idle disconnect, there was no way to tell whether the push task was actually pushing to that connection or being eaten silently. The counter both confirms the task is healthy for a given client and gives us a concrete data point (N < 60 means pushes were dropped) when triaging future "slicer disconnects on idle" reports. No behaviour change to the push itself.

### Security
- **PyJWT bumped to >=2.13.0 to pick up upstream advisory fixes** — `pip-audit` flagged four advisories against 2.12.1 (all fixed in 2.13.0). Pre-bump audit confirmed Bambuddy's usage is unaffected by the five behavioural changes in 2.13.0: (a) HMAC empty-key reject — `_get_jwt_secret()` already guards against `""` at every priority (env-var falsy check, file `len >= 32` gate, generated `secrets.token_urlsafe(64)`); (b) PyJWK header-`alg` must match JWK's algorithm — OIDC decode in `mfa.py:1846` uses `signing_key.key` (raw-key path), not the `PyJWK` wrapper, so this branch doesn't apply; (c) `PyJWKClient` rejects non-HTTP(S) URIs at construction — `mfa.py:1839` constructs from OIDC discovery `jwks_uri` which is HTTPS, and `fetch_data` is overridden so the URI is never fetched anyway; (d) `b64=false` RFC 7515/7797 strictness — no detached-payload usage anywhere in the codebase; (e) per-call `enforce_minimum_key_length` now actually enforces — option not passed anywhere, and the generated 64-byte secret is well over HS256's 32-byte minimum regardless. 229 auth/MFA/OIDC integration tests + 78 auth-related unit tests pass on 2.13.0; runtime encode/decode roundtrip with the real `SECRET_KEY` verified; `pip-audit --strict` reports no remaining vulnerabilities. Pins bumped in `requirements.txt` (PyJWT>=2.13.0) and `pyproject.toml` dev group (pyjwt>=2.13.0).
- **WebSocket auth gate + audit-driven hardening sweep — A proactive auth-surface audit run surfaced one critical (`/api/v1/ws` broadcast every printer-status / archive / inventory event to anyone reachable on the HTTP port. All fixed in the same PR.
- **API-key permission enforcement is allowlist-based** (reported by @vfxdev) — The three documented API-key scopes ("Read Status", "Manage Queue", "Control Printer") were enforced only inside the legacy `/api/v1/webhook/*` router; every other route used `require_permission_if_auth_enabled` which fell through to a 17-entry admin denylist for API keys and ignored the per-key scope flags. The structural failure modes: (a) any valid key, including one with every scope checkbox unticked, could call print start/stop/pause/resume, queue create/delete/reorder, archive reprint, and every `*_READ` endpoint outside the denylist; (b) `require_any_permission_if_auth_enabled` (`inventory.py`) and `require_ownership_permission` (`print_queue.py`, `archives.py`, `library.py`, `library_trash.py`) returned `None` for any valid key with zero scope check, granting full ownership-modify access to ~10 ownership-gated routes; (c) every new `Permission` enum value added to `core/permissions.py` since the denylist was written silently joined the "API-key-allowed" bucket — fail-open-by-construction, which is exactly how the surface grew over time. **Fix**: `core/auth.py::_check_apikey_permissions` now consumes a new `_APIKEY_SCOPE_BY_PERMISSION` allowlist that maps every non-admin `Permission` to exactly one scope flag on the `APIKey` row; unmapped permissions return 403 ("administrative operations") regardless of which flags are set; the helper is now invoked in all three previously-skipping dependencies. The denylist is retained as a redundant explicit "these are admin" marker plus drift-detection in tests, but the allowlist is the load-bearing check. **Two new scope flags** (per same-PR design discussion): `can_manage_library` (gates `LIBRARY_UPLOAD` / `LIBRARY_UPDATE_OWN` / `LIBRARY_DELETE_OWN` / `MAKERWORLD_IMPORT` — distinct trust level from queue management; rejected the "fold library upload into can_queue" shortcut) and `can_manage_inventory` (gates `INVENTORY_CREATE` / `INVENTORY_UPDATE` / `INVENTORY_DELETE` / `INVENTORY_FORECAST_WRITE` — required because SpoolBuddy kiosks write NFC scans, scale readings, and `/spoolbuddy/devices/{id}/system/command` + `/update` via INVENTORY_UPDATE under the prior denylist gap; 15+ kiosk routes depend on this scope). `CLOUD_AUTH` is now routed through the existing `can_access_cloud` flag (was unmapped → would have admin-denied; the router-level `_cloud_api_key_gate` already does this check, but the route-level dep now fails closed too for defence in depth). **Migration** (`core/database.py::run_migrations`, dialect-branched per [[feedback_sqlite_and_postgres_upfront]]): two new boolean columns added to `api_keys` with `DEFAULT TRUE`, one-shot backfilled to mirror `can_queue` (gated on a new `_api_keys_column_exists` check so the backfill runs only on the migration that adds the column — user-edited values on subsequent restarts are never clobbered). Backfill rationale: a key the operator created as "queue-only" was implicitly relying on the upload+queue and inventory-write workflows the queue scope already let through, so mirroring `can_queue` preserves the operator's intent; a hardened "read-only" key (`can_queue=False`) does NOT silently gain new writes on upgrade. The bundled SpoolBuddy CLI key is explicitly granted `can_manage_inventory=True` because the kiosk itself is the legitimate writer (NFC scan, scale reading, /system/command). **Structural drift backstop**: new `test_every_permission_has_a_classification` fails CI on any future `Permission` added to `core/permissions.py` without an entry in `_APIKEY_SCOPE_BY_PERMISSION` or `_APIKEY_DENIED_PERMISSIONS` — the previous denylist shape allowed silent surface growth, this catches it. **Tests** (`test_auth_apikey_rbac.py`): 78 new — pure-logic `_check_apikey_permissions` matrix covers every (Permission × scope-flag combo) outcome with cross-scope leakage assertions, the structural drift-detection guard, allowlist/denylist disjointness, scope-flag-has-permissions sanity, unknown-perm-string + empty-perm-list fail-closed cases, and the `require_any=True` semantics; the existing denylist-integrity test is updated to reflect that INVENTORY_CREATE/UPDATE are now allowlisted (not admin-only-by-omission) and that operations admin only via omission (PRINTERS_CREATE, LIBRARY_DELETE_ALL, LIBRARY_PURGE, DISCOVERY_SCAN) still 403 with a fully-flagged key. Full 5469-test backend suite green; backend ruff clean. **Frontend**: API-key create dialog gains "Manage Library" + "Manage Inventory" checkboxes with descriptions, the existing list view gains Library and Inventory badges, the cosmetic `apiKeyName`/save-toast flow is unchanged; `api/client.ts` `APIKey` / `APIKeyCreate` / `APIKeyUpdate` types extended. **i18n parity**: real translations for the 6 new keys (`manageLibrary` / `manageLibraryDescription` / `manageInventory` / `manageInventoryDescription` / `libraryBadge` / `inventoryBadge`) across all 9 locales per the [[feedback_translate_dont_fallback]] HARD RULE; parity script green at 5005 leaves × 9 locales. **Wiki** (`features/api-keys.md`): permissions table grows from 5 to 7 toggles with the new scopes and an updated "Principle of Least Privilege" examples list; upgrade notes call out the can_queue-mirroring backfill so operators understand why an existing "queue-only" key keeps uploading after upgrade (and why a "read-only" key still won't); a new explicit "Allowlist model since 0.2.4.5 (GHSA-r2qv-8222-hqg3)" callout documents the shift from denylist to allowlist with the exact previous failure mode (so the audit-trail isn't only in this CHANGELOG). **Out of scope / explicit choice**: did not refactor the SpoolBuddy kiosk routes to use a more semantically-accurate permission than `INVENTORY_UPDATE` for `/system/command` and `/update` (large blast radius across 15+ route decorators, and `can_manage_inventory` matches the trust dimension correctly); did not consolidate the bespoke `require_energy_cost_update` into the new allowlist (its narrow-scope semantics — bypass the SETTINGS_UPDATE denylist via `can_update_energy_cost` — predates this work and is still the right shape for that one electricity-price endpoint).
- **Trivy DS-0026 (`Dockerfile.test` missing HEALTHCHECK): silenced via `HEALTHCHECK NONE`** — The test image runs `pytest` and exits; there is no long-running service to probe, so any HEALTHCHECK we added would be cargo-cult noise. `HEALTHCHECK NONE` is the documented Docker directive to explicitly opt out of any inherited healthcheck and is the way Trivy expects projects to signal "this image is not a service." Closes code-scanning alert #813.
- **VP access codes now compared with `hmac.compare_digest` (constant-time)** — Pre-fix: both `FTPSession.cmd_PASS` and `SimpleMQTTServer._handle_connect` used Python's `==` operator on the 8-char access code. Constant-time comparison closes the timing-side-channel without changing the protocol surface. Same auth, no UX change.
- **VP MQTT brute-force rate-limit per source IP** — 5 failed CONNECT attempts within a 60 s sliding window block further auth attempts from that IP for the rest of the window. Auto-recovers — no manual unblock. Constants `_AUTH_RATE_LIMIT_MAX_ATTEMPTS = 5` / `_AUTH_RATE_LIMIT_WINDOW_SECONDS = 60.0` are module-level for ops tunability. See Added section for full description.
- **VP `access_code` no longer leaked in DEBUG logs** — Pre-fix: `PUT /virtual-printers/{id}` logged `body.model_dump(exclude_unset=True)` at DEBUG, which dumped the plaintext access code whenever the user saved a new one. Now the field is redacted (`***`) before the log emission. Violation surfaced by no-secrets-in-logs audit; not exploitable in the field (DEBUG is off by default) but is exactly the kind of leak the rule exists to prevent.
- **VP FTP upload capped at 4 GiB (DoS guard)** — `cmd_STOR` now rejects an upload that crosses `MAX_UPLOAD_BYTES = 4 GiB`, deletes the partial file, and replies 426. Without the cap a runaway or malicious client could drive RSS or disk to exhaustion; 4 GiB is well above any realistic multi-plate `.gcode.3mf`. Same code path adds the streaming rewrite (see Changed section for details).
- **Path-traversal hardening across the upload / import / file-write surface (routes + services); fifth CI backstop ships alongside** — A private path-traversal report against `POST /api/v1/projects/import/file` traced two attacker-controlled strings being joined to `library_dir` with no resolve + containment check: (a) `linked_folders[*].name` from the request's `project.json` ("Vector A" — an absolute path in this field collapsed `library_dir / "/anywhere"` to `Path("/anywhere")` because pathlib discards the left side when the right is absolute, letting the next `write_bytes` land anywhere the backend could write), and (b) per-entry `zf.namelist()` paths from the ZIP itself ("Vector B" — ZIP filenames carry `..` segments by spec and the join `library_dir / folder_name / relative_path` had no per-component check). Concrete escalation: drop a `.pth` file into the venv's `site-packages` directory for code execution on next service restart; overwrite the JWT signing-secret file to forge an admin token; overwrite `~/.ssh/authorized_keys` or `~/.bashrc` on native installs. **Fix is structural, not just patch the diff** (per [[feedback_dont_dismiss_preexisting]]). New `backend/app/utils/safe_path.py::safe_join_under(parent, *parts)` helper joins under a trusted parent, resolves both sides, asserts `is_relative_to(parent.resolve())`, and rejects up-front empty / null-byte / absolute path components. Wired into `import_project_file` at both vectors. **Adjacent fix from the routes audit**: `GET /api/v1/archives/{id}/photos/{filename}` had NO validation on `filename` and FileResponse-served arbitrary paths — the existing DELETE endpoint at least had a membership check against `archive.photos` (which is UUID-generated on upload), but GET shared neither the check nor any traversal guard. Both GET and DELETE now route through `safe_join_under` for defence-in-depth on top of the membership check. **Second adjacent fix from the services audit**: `ArchiveService.attach_timelapse(archive_id, data, filename)` in `backend/app/services/archive.py:1456` wrote `archive_dir / filename` where `filename` ultimately comes from either a printer's FTP listing (compromised-printer threat model — the printer is part of the trust surface) or the `?filename=...` query param on `POST /api/v1/archives/{id}/timelapse/select`. A malicious printer that returns a directory listing entry with `..` segments could write the timelapse bytes outside the archive directory; the `f.get("name") == filename` gate in the route did not prevent it because the gate is satisfied by whatever the printer claims is on disk. `attach_timelapse` now routes through `safe_join_under(..., http=False)` and returns `False` (logging the rejection) when the join would escape — matching the existing not-found contract of the function rather than raising 400 from inside a background task. **Audit sweep methodology**: AST-walked every Python file under `backend/app/api/routes/` AND `backend/app/services/` for `Path / Name` shapes (the exact shape that produced the original report). 25 additional route-layer sites and 8 additional service-layer sites confirmed safe case-by-case (UUID-generated filenames written by Bambuddy itself, `_safe_filename(...)` / `Path(arg).name` basename-stripped inputs, `os.walk`-discovered names, denylist + format-validated backup names, hardcoded constants iterated through a tuple, DB-stored paths whose write origin already goes through a resolved-and-containment-checked helper). Each safe site got a `# SEC-PATH-OK: <reason>` marker so future audits can trust the inline guard at a glance. Six pre-existing safe-with-marker sites (`library.py` external upload, `archives.py` timelapse output, `projects.py` attachment download/delete, `settings.py` backup extractall) carry the same marker shape. **Fifth CI backstop** `test_route_path_arithmetic_is_safe_joined_or_marked` (`backend/tests/unit/test_no_unsafe_path_joins.py`) AST-walks every Python file in `backend/app/api/routes/` AND `backend/app/services/` and fails the build on any `<directory-variable> / <bare-variable>` join that doesn't either route through `safe_join_under` or carry the marker on the join line. Joins matching the higher-structure shapes (Attribute access, Subscript, f-string, `str(...)` call) are categorically different and out of scope — those are caught by the broader audit sweep, not the regression backstop. The services layer is in scope because it receives values from the routes verbatim AND from external sources Bambuddy has no control over (the printer FTP-listing case above). **Tests**: 17 unit tests for `safe_join_under` covering every escape vector (absolute path, Windows abs path, `..` segments, embedded `..`, null byte, empty string, no parts, non-str, plus legitimate nested-path round-trip); 4 integration tests against `POST /api/v1/projects/import/file` exercising the full FastAPI stack with the verbatim shape from the report (absolute path in `folder_name` → 400 + filesystem assertion that the target file doesn't exist; `..` in `folder_name` → 400; `..` in `relative_path` → 400; legitimate nested ZIP still imports cleanly to guard against the fix being over-strict); 3 unit tests against `ArchiveService.attach_timelapse` exercising the compromised-printer threat model (filename with `..` segments → returns False + no file at the escape target; absolute filename → returns False + no file at `/tmp`; legitimate `timelapse_YYYY-MM-DD_HH-MM-SS.mp4` → returns True + file lands inside archive_dir, guarding against the fix being over-strict). **SECURITY.md** gains a fifth rule + a fifth row in the CI-test mapping table; the rule explicitly names the printer FTP-listing case as in-scope to set the expectation for future services-layer audits. Full 5500+ test backend suite green; ruff clean.

### Fixed
- **Print-run log, spool usage history, camera-token list, and SpoolBuddy device "last calibrated" timestamps now render in the browser's local timezone instead of UTC (#1602, reported by @maziggy and confirmed by @IndividualGhost1905 with a UTC+3 reproduction)** — Reporter saw print-run completion timestamps show UTC clock values (e.g. `07:50` instead of the correct local `10:50` for Berlin / `10:50` instead of `13:50` for a UTC+3 host). Same shape as the #504 timezone-offset bug from Feb 2026 — frontend display helpers calling `new Date(isoString)` directly on backend timestamps without timezone indicators. Per ECMAScript, a bare `"2026-06-02T07:50:00"` is parsed as **local time**, so a UTC-stored value gets displayed as if its numeric components were already local — visually identical to UTC. The #504 fix patched 13 sites but missed four: PrintLogTable and SpoolUsageHistory hadn't been written yet; CameraTokensPage and SpoolBuddySettingsPage existed but were overlooked. **Fix** — replaced the bare `new Date(iso)` calls in `frontend/src/components/PrintLogTable.tsx::formatDate` (per-archive Runs list — the reporter's literal symptom), `frontend/src/components/SpoolUsageHistory.tsx::formatDate` (spool usage records), `frontend/src/pages/CameraTokensPage.tsx::formatDate` + `isExpired` (long-lived camera token created / expires / last-used columns), and `frontend/src/pages/spoolbuddy/SpoolBuddySettingsPage.tsx::formatDateTime` (SpoolBuddy device "last calibrated") with calls to the shared `parseUTCDate()` helper from `utils/date.ts`, which appends `Z` to naive ISO strings and parses TZ-tagged strings as-is — already used by every other date formatter in the codebase and well-tested (`parseUTCDate` has 4 dedicated test cases covering null/empty/tagged/naive inputs). `isExpired` in `CameraTokensPage.tsx` got the same treatment because comparing a misparsed Date against `Date.now()` would have produced false "not expired" / "expired" results around the TZ-offset boundary. **What this does NOT fix** — the printer-card ETA reporter #1 described (10:50 + 57m showing 09:48). That comes from `formatETA(status.remaining_time)` which is purely client-side (`new Date()` plus minutes from the WebSocket payload, then `toLocaleTimeString([])`); for it to render UTC the browser timezone itself would need to be UTC. That's a browser / OS config issue, not Bambuddy's display. If reporter #1 was actually looking at log timestamps (the same surface reporter #2 explicitly called out), this fix covers it; otherwise their ETA complaint stays a config matter. **Audit confirmed no other regressions** — grepped every `new Date(` call in `frontend/src/` for backend-supplied string arguments. Remaining call sites either pass a number (epoch ms from chart data — `AMSHistoryModal.tsx:327,349`), construct from a numeric date string only with no time component (chart axis labels — `FilamentTrends.tsx:57,129`), use the result only for `.getTime()` arithmetic where the same TZ offset cancels out (sort comparators in `StatsPage.tsx:920`, `ForecastPanel.tsx:101,111,112,141`, `FilamentTrends.tsx:70`), or already wrap in `parseUTCDate(...) || new Date(...)` as defensive fallback (`StatsPage.tsx:607,895`). `FailureDetectionSettings.tsx:359` uses `new Date(ev.timestamp)` directly but the backend (`obico_detection.py:293`) emits `datetime.now(timezone.utc).isoformat()` which includes a `+00:00` indicator so ECMAScript parses it as UTC correctly — unchanged. **No new tests added** — the four `formatDate` / `formatDateTime` helpers are local to their files and the bug is mechanical "use the existing helper"; `parseUTCDate` itself has full coverage in `__tests__/utils/date.test.ts`. Frontend build clean, ESLint zero output, full date-utils + impacted-component vitest suites (103 tests) green, i18n parity green at 5007 leaves × 9 locales.
- **Archive card's Print Time + accuracy badge are now consistent for multi-run / multi-plate archives (#1608, reported via an AI-assisted diagnosis that included the failing SQL, file line numbers, and a worked example for archive #65)** — Reporter's case: 3-plate `.gcode.3mf` printed plate-by-plate over 9 runs. Card showed `1h 46m  +188%` next to the now-correct `156.7g` / `$9.81`. The 1h 46m = 6364 s = one run's `completed_at − started_at`; the +188% = `print_time_seconds / 6364` − 100 % where `print_time_seconds` is 18354 s (the whole-file estimate the #1593 parser fix correctly stores). The two halves describe different scopes — apples-to-oranges. **Root cause** — `backend/app/api/routes/archives.py::compute_time_accuracy` (line 152) only inspects the archive row's own `started_at` / `completed_at`, which reflect the latest run, while `archive.print_time_seconds` is the sum across plates post-#1593. The existing 5-500 % sanity band catches truly broken values but lets the deterministic N×100% shape through (300% for a 3-plate file). `archive_to_response` calls `compute_time_accuracy` on every list / detail / search / project-archive / patch render (line 275), so the bad number reaches the frontend on every card surface. The stats endpoint (`/api/v1/archives/stats`, line 940-988) has its OWN per-run accuracy loop with a tighter 50-200 % band filter shipped with #1593 — that's untouched and stays correct. **Fix** — `compute_time_accuracy(archive, run_aggregate=None)` gains an optional `run_aggregate` argument. When `run_aggregate["run_count"] > 1`, both `actual_time_seconds` and `time_accuracy` are returned as `None`. The frontend already falls through to `archive.print_time_seconds` for the Time display (`archive.actual_time_seconds || archive.print_time_seconds`) and conditionally renders the badge only when `archive.time_accuracy` is truthy, so multi-run archives now show "Estimated 5h 6m" with no badge instead of "Actual 1h 46m  +188%". Single-run archives — the case the badge was designed for, and the only case where one-run actual versus whole-file estimate is a meaningful ratio — keep the original behaviour verbatim. **Audit-wide** — `archive_to_response` now passes `run_aggregate` through to `compute_time_accuracy` at the response-conversion call site. The 3 endpoints that did NOT previously load run aggregates (`backend/app/api/routes/archives.py` search endpoint's pre-FTS fast path at line 583 and FTS path at line 610, the single-archive PATCH endpoint at line 1419, and `backend/app/api/routes/projects.py::list_project_archives` at line 706) now batch-load `_load_run_aggregates` and pass it through, so the badge-suppression applies on every card surface — not just the main list and detail endpoints. One extra `SELECT … GROUP BY archive_id` per endpoint (the helper is already batched), cheap. Per the [[feedback_pr_reviews_thorough]] HARD RULE the fix is shipped across every call site that renders an archive card. **What this does NOT change** — the stats endpoint's per-run accuracy aggregation at line 940-988, its 50-200% band filter, the `archive.started_at` / `completed_at` source-of-truth for the latest-run timestamps, the frontend `ArchivesPage.tsx:1004-1022` rendering logic, or the time-accuracy computation for single-run archives. Reprint scope is unchanged (the reporter's option A — comparing summed run durations against the whole-file estimate — was not pursued because it produces a different but equally misleading number for the reprints-of-a-single-plate-file shape, where sum-of-runs = N × estimate). **Tests** — `backend/tests/unit/test_archive_run_aggregation.py::TestComputeTimeAccuracyMultiRun`: 4 new direct unit tests for the function — single-run archive keeps original badge, no `run_aggregate` argument keeps original badge (defends the legacy caller pattern), multi-run archive (reporter's exact 9-run case) clears both fields, and `run_count: 0` edge case keeps original behaviour. Two new integration tests against the live archives list endpoint: `test_archive_list_suppresses_time_accuracy_for_multi_run_archives` is the #1608 regression (3-plate plate-by-plate fixture, asserts both `actual_time_seconds is None` and `time_accuracy is None` AND that the estimate `print_time_seconds` survives so the card has something to render), and `test_archive_list_keeps_time_accuracy_for_single_run_archives` is the sanity check that the badge still shows for the happy path. Full backend pytest 3680 passed under `-n 30`; ruff clean. **No frontend change required** — the existing rendering logic in `ArchivesPage.tsx:1004-1026` (`formatDuration(archive.actual_time_seconds || archive.print_time_seconds || 0)` for the time + `{archive.time_accuracy && …}` conditional badge) naturally produces the desired "show estimate, no badge" presentation when the backend returns null for both fields.
- **Queue / Review / Archive virtual-printer modes now complete the TLS handshake on hardened-distro hosts (#1610, reported by an AI-assisted diagnosis)** — Reporter ran Bambuddy in a container on a hardened-policy host (Fedora / RHEL with `update-crypto-policies` or similar) and OrcaSlicer / BambuStudio failed to connect to any non-proxy-mode virtual printer with `code=-1` after the TCP handshake completed. Switching the same VP to Proxy mode worked. They grepped the container and pinpointed that the #620 cipher-suite fix only patched `tcp_proxy.py::_create_client_ssl_context` (printer-facing) and missed every other slicer-facing VP TLS context. Diagnosis confirmed: real Bambu printers (and slicer paths written to mimic them) offer only the plain-RSA AES-GCM suites `AES256-GCM-SHA384` / `AES128-GCM-SHA256`; on stock OpenSSL these stay in `DEFAULT`, but a system crypto policy that strips them leaves the server side offering ECDHE-only and the slicer's ClientHello finds no overlap — handshake aborts before any data flows. **Audit-wide fix (4 contexts patched, one regression test class per site)**: (a) `backend/app/services/virtual_printer/bind_server.py::_create_tls_context` (port 3002, used by Queue/Review/Archive modes — the literal reported failure) — added `ctx.set_ciphers("DEFAULT:AES256-GCM-SHA384:AES128-GCM-SHA256")`; (b) `backend/app/services/virtual_printer/mqtt_server.py::SimpleMQTTServer.start` (port 8883, slicer MQTT-over-TLS) — same cipher pin; (c) `backend/app/services/virtual_printer/tcp_proxy.py::TLSProxy._create_server_ssl_context` (slicer side of Proxy-mode 3002 — the #620 fix's *other* half that was never written) — same cipher pin; (d) `backend/app/services/virtual_printer/ftp_server.py::VirtualPrinterFTPServer.start` (port 990, FTPS upload) — changed from the historical `HIGH:!aNULL:!MD5:!RC4` to `HIGH:AES256-GCM-SHA384:AES128-GCM-SHA256:!aNULL:!MD5:!RC4`. The `HIGH` baseline is kept verbatim (not replaced with `DEFAULT`) so the cipher set stays a strict superset of what shipped before — the original `HIGH` set offers ~58 ciphers `DEFAULT` doesn't (CCM, ARIA, CAMELLIA, DSS variants); none are picked by any known Bambu slicer, but the [[feedback_dont_remove_compat_pinning]] HARD RULE says don't narrow a compat surface without proof. The `!aNULL:!MD5:!RC4` exclusions are preserved as well. For the three new contexts (a/b/c), the cipher string is `DEFAULT:AES256-GCM-SHA384:AES128-GCM-SHA256` — verbatim match with the #620 client-side fix. **Verified strict-superset** at audit time (`{c['name'] for c in old.get_ciphers()}.issubset({c['name'] for c in new.get_ciphers()})` returns True for all four call sites). Per the [[feedback_vp_regression_matrix]] HARD RULE, the slicer-facing TLS surface gets the fix in one drop instead of a per-mode-per-issue ticket trail. Per [[feedback_dont_remove_compat_pinning]], the `minimum_version = TLSv1_2` and the FTPS `maximum_version = TLSv1_2` pins (the BambuStudio FTPS-data-channel-PSK-reuse compat) are unchanged — only the cipher list is widened, never narrowed. **Tests** (`backend/tests/unit/test_vp_tls_ciphers.py`, new file): 5 cases — one per slicer-facing surface (bind / mqtt / proxy-server / ftp) asserting `AES256-GCM-SHA384` AND `AES128-GCM-SHA256` are in the SSL context's offered cipher list, plus a guard test that the original #620 client-side `tcp_proxy._create_client_ssl_context` still has them so this audit's edits can't accidentally regress that fix. Cipher assertions use the production `CertificateService` to generate a real self-signed CA + per-VP cert pair into `tmp_path` (rather than mocking `load_cert_chain`) so the SSL contexts are configured exactly as production would. Full backend unit suite 3674 passed under `-n 30`; ruff clean. **Why neither maintainer nor the local CI box reproduces the bug**: stock OpenSSL 3.x ships `AES256-GCM-SHA384` / `AES128-GCM-SHA256` in `DEFAULT` already, so the missing `set_ciphers()` calls were harmless on most builds — verifiable with `python -c "import ssl; print(c['name'] for c in ssl.SSLContext().get_ciphers())"`. The bug only manifests on builds where a system crypto policy or vendor build flag narrows the default to forward-secrecy-only. The explicit cipher pins now survive any such narrowing. **What this does NOT do**: the printer-side TLS surface (proxy client context, MQTT printer-client context in `bambu_mqtt.py`) is unchanged — printers always sit behind the unfiltered #620 client pin, and there's no equivalent failure mode reported there.
- **External-spool usage is now tracked when the AMS has empty slots in between loaded ones (#1607, reported by @ahmtcnby)** — Reporter had AMS slots 0–2 loaded, slot 3 empty, and an external spool. After every multi-filament print, the external's weight never decremented; assigning the external spool to the empty AMS slot 3 in Bambuddy made the deduction appear correctly. Root cause: when no explicit slot-to-tray mapping is available (path 5 of 6 in `usage_tracker.py::_track_from_3mf`, e.g. the very first print after a fresh container start before the request-topic subscription that captures `ams_mapping` from `print_command` is accepted — the bundle showed `Request topic subscription accepted. ams_mapping capture enabled` only fired at 19:36:29), the tracker falls back to a position-based mapping built from `spoolman_tracking.py::build_ams_tray_lookup`. That helper enumerated every AMS tray by `id` regardless of whether a spool was loaded, so the reporter's layout yielded `available_trays = [0, 1, 2, 3, 254]`. BambuStudio / OrcaSlicer compact their filament-assignment UI by hiding unloaded AMS slots — the slicer's 4th filament is the external, so the 3MF carries slot_ids 1–4 with slot 4 = external. Position-based mapping then routed slot 4 → `available_trays[3]` = AMS0-T3 (the empty slot) instead of 254 (the external). No spool assignment exists at AMS0-T3, so usage was silently skipped at line 1273-1274 and the external spool's weight stayed unchanged. **Fix** (`backend/app/services/usage_tracker.py:1232-1245`): the position-based fallback now filters `build_ams_tray_lookup`'s output to slots whose `tray_type` is non-empty before sorting. `build_ams_tray_lookup` itself is unchanged (its other callers — `spoolman_tracking.store_print_data`, `routes/printers`, `spool_assignment_notifications` — want every physical slot for AMS-state purposes); the filter is applied at the call site so we only narrow what the fallback uses. vt_tray entries are already filtered the same way inside `build_ams_tray_lookup` at line 174 (`if vt.get("tray_type"):`) — this mirrors that behaviour for the AMS side. **Why the reporter's workaround helped**: assigning the external spool to AMS0-T3 in Bambuddy made the wrong-target rewrite accidentally land on the right spool — the empty AMS slot resolved to the same spool the external was fed from. The fix removes the need for that workaround. **Tests**: 2 new in `backend/tests/unit/test_usage_tracker.py::TestPositionBasedFallbackEmptyAmsSlot` — `test_external_routed_correctly_when_ams_has_empty_middle_slot` is the literal #1607 regression (3 AMS slots loaded + 1 empty + external loaded, slicer's slot 4 must charge spool at AMS255-T0, **must NOT** charge anything at AMS0-T3 — explicit `(0, 3) not in handled_trays` assertion); `test_dense_ams_unchanged_no_empty_slots` is the no-empty-slots sanity check that confirms the fix doesn't regress the everyday case (4 AMS slots all loaded + external → slot 5 still maps to external). Path priority order unchanged: explicit `print_cmd` / MQTT / queue / color-match mappings still override the position-based fallback, so this only changes behaviour when none of those paths fired. Full backend pytest 3669 passed under `-n 30`; ruff clean.
- **Custom maintenance type "documentation URL" now persists on create (#1596, reported by @BurntOutHylian — with the exact root cause pre-triaged in the issue body)** — POST `/api/v1/maintenance/types` hard-coded every field on the `MaintenanceType` constructor by name (`name`, `description`, `default_interval_hours`, `interval_type`, `icon`, `is_system`) and silently dropped `wiki_url`, even though the Pydantic schema accepted it and the response model echoed it back as `null`. PATCH was fine because it used `data.model_dump(exclude_unset=True) + setattr`, which is why editing a freshly-created type DID save the URL — masking the bug under any "save then immediately fix it" test. **Fix**: add `wiki_url=data.wiki_url` to the constructor call at `routes/maintenance.py:206`. **Frontend nit also addressed in the same drop** (#1596 nit section): `MaintenancePage.tsx:1131` `updateTypeMutation`'s inline `Partial<{...}>` shape listed `name | default_interval_hours | interval_type | icon` only. The value reached the API correctly at runtime because `api.updateMaintenanceType` accepts `Partial<MaintenanceTypeCreate>` (which includes `wiki_url`), but the local type was misleading — anyone reading the mutation would wrongly conclude `wiki_url` wasn't part of the update payload. Extended the inline shape to include `wiki_url?: string | null`. **Tests**: one new integration test in `test_maintenance_api.py::test_create_custom_type_persists_wiki_url` — POSTs a custom type with a `wiki_url`, asserts the POST response carries it, and verifies via a separate GET round-trip that the value actually committed (defending against the "response echoes request body" failure mode the bug would have masked). Full 5565-test backend suite green; ruff clean; frontend build clean; ESLint zero output; touched MaintenancePage vitest green.
- **External-folder `.gcode.3mf` files now show thumbnails, and every ingest path stores the same canonical `file_type` for sliced outputs (#1600, reported by @maziggy)** — Reporter noticed external-folder sliced outputs landed with no thumbnail. Cause: four backend ingest paths classified `LibraryFile.file_type` differently for the same `.gcode.3mf` family. The upload, ZIP-extract, and in-process paths used `os.path.splitext(filename)[1]` which returns `.3mf` for `foo.gcode.3mf`, stored `file_type="3mf"`, and matched the thumbnail-extraction gate at `library.py:1467` (`if file_type == "3mf":`). The external-folder scan path explicitly detected the compound and set `file_type="gcode.3mf"` — preserving the "sliced output" identity — but then skipped both `if file_type == "3mf":` (mismatch) and `if file_type == "gcode":` (also mismatch), so the file landed with `thumbnail_path = None`. Same compound-extension drift that bit #1543's 3D preview gates, just in a different surface that the #1543 frontend audit didn't trace back to. **Unified fix** (per the user's "unify if it's safe" directive): new `classify_file_type(filename)` helper in `library.py` is now the single source of truth — returns `gcode.3mf` for sliced outputs and `ext[1:]` otherwise. Applied to every ingest path: upload (`routes/library.py:1704`), ZIP-extract (`routes/library.py:1998`), external-folder scan (the bug site, plus the manual compound check is replaced), and the in-process `save_3mf_from_bytes()` helper (`routes/library.py:471` — used by MakerWorld import). The external-scan thumbnail gate is widened to `if file_type in ("3mf", "gcode.3mf"):` so a sliced output now goes through ThreeMFParser (a `.gcode.3mf` IS a 3MF zip with `Metadata/plate_1.png` thumbnail; the parser doesn't care about the trailing extension). The gcode-download endpoint at `GET /api/v1/library/files/{id}/gcode` (`routes/library.py:4390`) had the same drift in reverse — its gate was `elif file.file_type == "3mf":` so a row stored with `file_type="gcode.3mf"` (the external-scan path's pre-unification behaviour, and now the canonical going forward) was rejected with HTTP 400. Widened to `elif file.file_type in ("3mf", "gcode.3mf"):` so both ingest histories work. **One-shot DB migration** in `backend/app/core/database.py::run_migrations` backfills existing legacy rows: `UPDATE library_files SET file_type='gcode.3mf' WHERE file_type='3mf' AND LOWER(filename) LIKE '%.gcode.3mf'`. Idempotent (post-update rows no longer match the `file_type='3mf'` predicate, so re-runs at every boot are no-ops) and dialect-neutral (`LOWER` + `LIKE` are identical under SQLite and Postgres per the [[feedback_sqlite_and_postgres_upfront]] HARD RULE; behaviour-identical on Postgres by construction, tested explicitly on SQLite in the new regression suite). Without the backfill, users would have a permanent split state in the DB — old uploads at `3mf`, new uploads at `gcode.3mf` — which would (a) double-bucket sliced outputs in the dashboard stats query at `routes/library.py:4615` (`SELECT file_type, count(*) GROUP BY file_type`) and (b) show two entries in the file-manager filter dropdown for the same conceptual type. **Frontend untouched** — `FileManagerPage.tsx` and `ProjectDetailPage.tsx` already accept both `'3mf'` and `'gcode.3mf'` for Preview-3D, type-pill colour, and the file action gate per the #1543 fix. After the migration the DB only contains canonical values, so the legacy `'3mf'` branches in the frontend become dead code for sliced files — they stay in place to handle any future ingest path I missed (defence in depth — better a redundant gate than an empty card). **Tests**: 13 new in `test_library_classify_file_type.py` covering the helper across every compound / casing / no-extension case; 3 new in `test_library_file_type_backfill_migration.py` (legacy `.gcode.3mf`/`3mf` row backfilled, mixed-case filenames upgraded via `LOWER()`, unrelated `.bak`-suffixed compound substring left untouched, plain `.3mf` / raw `.gcode` / `.stl` untouched, idempotent on re-run); 2 new integration tests in `test_library_api.py` (upload of `.gcode.3mf` now stores `file_type="gcode.3mf"` via the unified path; the gcode-download endpoint accepts a row with `file_type="gcode.3mf"` and returns the embedded gcode). Full backend pytest 5564 passed under `-n 30`; ruff clean; frontend build clean; eslint zero output; i18n parity green at 5007 leaves × 9 locales.
- **Virtual-printer "Send file" IP rewrite now also fires for VPs without a dedicated bind IP (#1429 follow-up, residual case confirmed by @Mape6 on the 2026-06-02 daily)** — The first #1429 fix's `_refresh_ip_encoding` early-returned when `mqtt_server.bind_address` was `0.0.0.0` or empty (which is the default for any VP created without a bind IP selected — covered by the "Deferred (fix D)" note in the original #1429 changelog entry). On a flat-LAN install that's the typical case, so for those VPs the encoding never armed, `_rewrite_net_info_ips` was a no-op on every push, and the slicer kept following the real-printer IP to the printer's SD card — the exact symptom @Mape6 reported after pulling the 2026-06-02 daily that supposedly fixed this. **Fix (`backend/app/services/virtual_printer/mqtt_bridge.py`)**: new `_resolve_host_interface_for_target()` helper consults the existing `network_utils.find_interface_for_ip()` to pick the host interface in the same subnet as the printer's IP when `bind_address` is unspecified. `_refresh_ip_encoding` now falls back to that auto-resolved IP instead of returning early; an explicit bind IP still takes precedence. INFO log line distinguishes the two paths (`armed: ... (bind_address)` vs `armed: ... (auto-resolved)`) so support bundles answer "which IP did the rewrite pick?" without re-reasoning. If no interface matches the printer's subnet (the helper returns None), the bridge leaves encoding unarmed and the cache flows through as before — no crash, no wrong rewrite. **Tests** — 4 new in `backend/tests/unit/test_vp_mqtt_bridge.py::TestBindAddressAutoResolve`: rewrite arms via auto-resolved IP when bind_address is `0.0.0.0`; rewrite stays disabled when no host interface matches (no crash); explicit bind_ip takes precedence over auto-resolve; helper itself returns None when `find_interface_for_ip` does. All 39 mqtt_bridge tests pass; full backend unit suite (3667 tests) green; ruff clean. **Note on subnet matching**: the helper is best-effort — it picks the interface whose subnet contains the printer's IP, which is the right answer when slicer + printer + Bambuddy share a LAN (the typical home-lab case). Setups where the slicer reaches Bambuddy via a different interface than Bambuddy uses to reach the printer (multi-homed hosts, Tailscale + LAN where the slicer is on Tailscale and the printer on LAN) may still need an explicit bind IP — there's no leak in that case, just a rewritten value the slicer can't route to. The full audit-shaped resolution (enumerate accepted connections, per-slicer rewrite) is still a separate change.
- **Virtual-printer "Send file" no longer redirects from Bambuddy to the physical printer's SD card once the printer powers on, and the mode button labels finally match the wire values stored in the DB (#1429, reported by @TrickShotMLG02, confirmed by @Mape6)** — Two reporters on completely different network topologies (3-subnet routed via OPNsense vs. flat single-LAN) saw the same symptom: with the physical printer off and Bambuddy freshly restarted, the slicer's "Send" landed in Bambuddy's archive; once the printer powered on, every subsequent "Send" went straight to the printer's SD card and bypassed Bambuddy entirely. @Mape6's packet capture on the flat-LAN case ruled out subnet / mDNS-reflector / firewall theories — the slicer just had a non-Bambuddy IP for the FTP destination once the printer was online. Bundle analysis: `mape6-before` (printer off) showed clean FTP receive + archive lines; `mape6-after` (printer on) had zero FTP connection attempts to Bambuddy, full stop. The mode-label discrepancy in every support bundle was a separate red herring that needed clearing up in the same drop. **Root cause** — `backend/app/services/virtual_printer/mqtt_bridge.py::_on_printer_raw` caches the real printer's `push_status` and rewrites `net.info[*].ip` from real-printer LE-uint32 to VP-bind-IP LE-uint32 so the slicer's FTP destination resolves to the VP. The rewrite has been in tree since 2026-05-03 and the unit test that ships with it passes. But the encoding (`_target_ip_uint32_le`, `_vp_ip_uint32_le`) was only computed inside `_resolve_client` on **client-identity change**, and `_resolve_client` early-returned (`if current is self._target_client: return`) on every refresh tick when the same client object was still bound. So if the printer's MQTT client object existed but `ip_address` was empty/stale at first bind (e.g. the printer's DB row hadn't picked up its discovered IP yet, or the client was constructed before the SSDP refresh), the encoded LE-uint32 stayed `None`, the rewrite block was skipped, the cache filled with the real printer IP, the sticky-keys preservation in the same function kept that poisoned `net` value alive across every subsequent incremental push, and the slicer followed the leaked IP to the real printer. The only way to clear it was to restart Bambuddy with the printer off — which is exactly the workaround both reporters independently arrived at. **Same shape on multi-NIC printers**: the rewrite only matched entries whose `ip` equalled `_target_ip_uint32_le`, so an X1C / H2D Pro reporting two active interfaces (WiFi + Ethernet) would have one entry rewritten and the other leaking the printer's other IP — a separate FTP fallback path that bypasses the VP even when the primary rewrite worked. **Fixes (mqtt_bridge.py)**: (1) `_resolve_client` now calls a new `_refresh_ip_encoding()` helper on every refresh tick, even when the client identity is unchanged — re-reads `current.ip_address`, re-encodes if either side changed, self-heals once `ip_address` becomes valid. (2) When the encoding becomes valid for the first time *after* the cache has already been populated, `_refresh_ip_encoding()` sweeps the cached `_latest_print_state` via the new `_rewrite_net_info_ips()` helper so the slicer's next pull sees the rewritten value — without this, sticky-key preservation keeps the poisoned cache alive across every incremental update. (3) `_rewrite_net_info_ips()` rewrites **every** non-zero `net.info[].ip` entry that doesn't already equal the VP bind IP, not only entries matching `_target_ip_uint32_le` — defensive against multi-NIC printers, against `_target_ip_uint32_le` being stale, and against unknown secondary interfaces leaking. Zero-IP entries (placeholders for unpopulated interfaces) are deliberately left alone so the slicer's "active interface" detection still recognises them as absent. (4) The rewrite path now logs at INFO when encoding arms or updates and at INFO when the cache sweep rewrites entries, so future support bundles directly answer "did the rewrite fire?" without re-reasoning about timing. **Mode wire-value rename (#1429 follow-up, separate confusion source)** — The UI button labeled "Archive" had always saved the wire value `immediate`, and "Queue" had always saved `print_queue`. Both reporters' support bundles showed `mode: immediate` while the UI said "Archive", and @TrickShotMLG02 specifically asked "I have no idea why it says immediate in the support-info.json file. In the webui the printer is set to archive". The mismatch was load-bearing for the debug session and had to be cleared up. Canonical wire values are now `archive` / `review` / `queue` / `proxy` matching the button labels 1:1. **Backend rename**: new `backend/app/models/virtual_printer.py::VP_MODE_*` constants + `normalize_vp_mode()` helper accepts legacy `immediate` / `print_queue` and translates to canonical. `VirtualPrinter.mode` default flipped to `archive`. `backend/app/services/virtual_printer/manager.py::VirtualPrinterInstance.__init__` normalises on construction so a legacy DB row read before the migration window has finished still dispatches to the correct handler; `on_file_received`, `on_print_command`, and `sync_from_db`'s change-detection all consume canonical values via `normalize_vp_mode()`. `backend/app/api/routes/virtual_printers.py::create_virtual_printer` and `update_virtual_printer` accept both forms on input and normalise to canonical before storage; `backend/app/api/routes/settings.py::get_virtual_printer_settings` normalises on read so frontend mode-button highlighting works for legacy stored values; `update_virtual_printer_settings` accepts and normalises on write. `backend/app/schemas/settings.py::AppSettings.virtual_printer_mode` default flipped to `archive` with updated description. **One-shot DB migration**: `backend/app/core/database.py::run_migrations` rewrites every `virtual_printers.mode` and `settings.virtual_printer_mode` row from `immediate` → `archive` and `print_queue` → `queue`. Idempotent — re-running on canonical values is a no-op, important because the full migration set runs every boot. Identical statement under SQLite and Postgres (plain `UPDATE ... WHERE` on a string column, no dialect-specific syntax) per the [[feedback_sqlite_and_postgres_upfront]] HARD RULE; tested explicitly on SQLite in the new regression suite, behaviour-identical on Postgres by construction. The historical single-VP migration (legacy `settings` rows → `virtual_printers` table on first multi-VP boot) gets the same `immediate` → `archive` / `print_queue` → `queue` translation; the historical `queue` → `review` alias is preserved because it predates the rename and reflected the user's intent at the time (the old wire `queue` meant "pending review", not "add to print queue"). **Frontend rename**: `VirtualPrinterSettings.tsx`, `VirtualPrinterCard.tsx`, and `VirtualPrinterAddDialog.tsx` all switched their button click handlers and `LocalMode`/`Mode` type aliases from `'immediate' | 'review' | 'print_queue' | 'proxy'` to `'archive' | 'review' | 'queue' | 'proxy'`. Each file gained its own `normalizeMode()` helper that translates legacy values arriving via stale-cached settings payloads to canonical, so the right mode button lights up even when the backend migration hasn't completed for that user's session yet. The two `printer.mode === 'queue' ? 'review' : printer.mode` legacy mappings in `VirtualPrinterCard.tsx::useEffect` and the error-recovery path have been replaced with `normalizeMode()` — they were the source of the test failure I caught mid-implementation where `mode: 'queue'` (the new canonical for the Queue button) was being incorrectly aliased back to `'review'` and hiding the auto-dispatch + force-color-match toggles. `frontend/src/api/client.ts::VirtualPrinterMode` is now the union of both canonical and legacy values (`'archive' | 'review' | 'queue' | 'proxy' | 'immediate' | 'print_queue'`) so older API clients (forks, mobile shortcuts, scripted setups) typecheck; the `updateSettings` body type narrows to canonical-only to steer new code. **Mode handler is NOT the dispatch bug**: `manager.py::_archive_file` is the handler for `archive` mode and it does archive-only (no dispatch to the physical printer). The user-visible "files end up on the printer's SD card" symptom was the IP-leak from the bridge cache, not a mode-dispatch bug. The mode rename is purely a clarity / support-bundle-accuracy fix. **Tests** — `backend/tests/unit/test_vp_mqtt_bridge.py`: 2 new in the bridge-rewrite class — `test_net_info_ip_rewritten_for_unknown_secondary_interface` covers the multi-NIC X1C / H2D Pro case where the printer reports an interface IP Bambuddy never saw; both entries get rewritten, the placeholder zero entry stays untouched. `test_late_arriving_printer_ip_rewrites_existing_cache` is the primary #1429 regression — bridge binds to a client with `ip_address=""`, first push lands and poisons the cache with the real-printer IP (the pre-fix state), the printer's `ip_address` then becomes known, the next `_resolve_client` tick arms the encoding AND sweeps the cached `net.info[].ip` so the slicer's next pull sees the VP IP. Without the sweep, sticky-key preservation would keep the poisoned value alive forever. `backend/tests/unit/test_vp_mode_rename_migration.py`: new file, 3 tests — legacy `immediate` → `archive` and `print_queue` → `queue` rewrites under SQLite, canonical values pass through untouched; legacy `virtual_printer_mode` setting also gets rewritten; running the migration twice is idempotent (every boot re-runs the full migration set). `backend/tests/integration/test_virtual_printer_api.py`: 3 reworked tests cover input-side normalisation — `test_update_mode_to_queue` asserts canonical, `test_update_mode_legacy_print_queue_normalises_to_queue` and `test_update_mode_legacy_immediate_normalises_to_archive` assert legacy → canonical translation on storage. The pre-existing `test_update_mode_legacy_queue_maps_to_review` (predating the rename, asserted the old `queue` → `review` alias) is removed; the new `test_update_mode_to_archive` covers canonical archive setting. **All other VP tests were updated to canonical** — `test_virtual_printer.py` (43 occurrences), `test_vp_diagnostic.py` (1), `test_virtual_printer_api.py` mocks (5) renamed; the `sync_from_db_restarts_on_mode_change` test had to be repaired by hand because the sed pass made both sides `archive` (defeating the change detection); now uses `archive` → `review` to actually exercise the change branch. Frontend: `VirtualPrinterCard.test.tsx`, `VirtualPrinterSettings.test.tsx`, `VirtualPrinterDiagnosticModal.test.tsx` updated to canonical fixtures and assertions; the legacy `queue maps to review` test in `VirtualPrinterSettings.test.tsx` replaced with two tests — legacy `immediate` lights up the Archive button, legacy `print_queue` lights up the Queue button, both via the new client-side `normalizeMode()` helper. The five `InventoryPage*.test.tsx` files that hardcoded `virtual_printer_mode: 'immediate'` in their settings mocks bulk-renamed to `'archive'`. **CI gates green**: backend pytest 5546 passed in 73.88s + 7.10s under `-n 30` / `-n 12` parallel; ruff clean; frontend `npm run build` clean (TypeScript + Vite); ESLint zero output; vitest 2045 passed in 26.12s; i18n parity script clean at 5007 leaves × 9 locales. **Deferred (fix D in the diagnosis writeup)**: bind_ip == 0.0.0.0 path. The rewrite is still explicitly skipped when bind_ip is the unspecified address, which is correct for the routing (you can't tell a slicer to FTP to 0.0.0.0) but leaves users without a dedicated bind IP exposed to the same IP-leak pattern. Both reporters had `has_bind_ip=true` in their bundles so this isn't load-bearing for #1429 itself; will be addressed as a separate audit-shaped change that needs to enumerate the host's outbound IPs and pick the one that can reach the printer, with its own test surface. **Out of scope for this PR**: port 40024 in @Mape6's packet capture (Bambu Network Plugin's LAN-Send pre-flight port) — a probe that arrives at the VP IP, finds no listener, and the slicer falls back. Adding a 40024 listener is conceptually a different surface (handshake parsing, not MQTT cache state) and the cache-leak fix alone removes the underlying redirection so the 40024 probe lands on a VP that's actually the right destination. Will reassess if either reporter still sees mis-routing after this fix.
- **Multi-plate `.gcode.3mf` archives + reprints no longer under-report filament, time, and cost — project stats and parser both fixed (#1593, reported by @needo37)** — Reporter printed 3 plates of a multi-plate file: Archive Print Log correctly recorded 3 completed runs at distinct durations and filament weights; Project page showed `Print Jobs: 1 / 1 parts printed`, plate-1's `1h53m / 58g / $1.09`; Archive card said `3 prints` but rendered plate-1's `57.6g / 1h45m / 1 object`. Two distinct causes stacked. **Root cause 1 — 3MF parser only read the first plate**: `ThreeMFParser._parse_slice_info` (`backend/app/services/archive.py:191`) called `root.find(".//plate")` and pulled `prediction` / `weight` from that one element — so for any multi-plate file the archive's file-level `print_time_seconds` / `filament_used_grams` reflected plate 1 alone. The per-plate `/plates` endpoint already looped `findall(".//plate")` and was correct, which is why the plate carousel showed the right numbers while the archive card was wrong. **Root cause 2 — project rollup aggregated `PrintArchive`, not the per-run log**: `compute_project_stats` and the `list_projects` quick-stats block (`backend/app/api/routes/projects.py`) summed `PrintArchive.print_time_seconds / filament_used_grams / cost / energy_*` `WHERE project_id = X`. A reprint reuses the source archive row and only adds a new `PrintLogEntry`, so 3 sequential runs of one file collapsed to 1 archive — and that archive's numbers were already plate-1-only because of root cause 1. The Archive Print Log path was correct because it already drove off `print_log_entries` (`archives.py:420` — *"Reads from print_log_entries so reprints contribute each run"*); project stats just hadn't been pointed at the same source. **Parser fix**: `_parse_slice_info` now loops `findall(".//plate")` and sums `prediction` → `print_time_seconds` and `weight` → `filament_used_grams` across all plates. Per-plate concepts (`plate_number`, `_plate_index`, `printable_objects`) are only set when there's exactly one plate — for multi-plate exports the archive represents all plates and a single plate index is meaningless at the file level. `bed_type` keeps the first plate's value as a best-effort archive default. Malformed `prediction` / `weight` values on individual plates skip cleanly rather than poison the sum. **Stats fix**: `compute_project_stats` and the `list_projects` quick-stats block both switch to an inner join `print_log_entries → print_archives` `WHERE archives.project_id = X`. `total_archives` becomes `COUNT(PrintLogEntry.id)` (actual runs, not files); `failed_prints` becomes the count of runs in `failed/aborted/cancelled/stopped`; `completed_items` becomes `SUM(PrintArchive.quantity)` filtered to runs with `status='completed'` (each run contributes its archive's quantity); `total_print_time_hours / total_filament_grams / estimated_cost / total_energy_*` come from `PrintLogEntry` columns. Orphan log rows (`archive_id IS NULL` after archive deletion via `ON DELETE SET NULL`) are excluded by the inner join — they can't be attributed to any project. **Backfill behaviour** (intentional, matches the reporter's "forward-only" note): users with AMS spool tracking — the reporter's case — have per-run `PrintLogEntry.filament_used_grams` from the tracked spool delta, not the plate-1 estimate, so project stats become correct *immediately* after the rollup fix with no reslice required. Users without tracking fall back to the archive estimate; their stats undercount until they reprint with the fixed parser. The Archive **card** still reads `PrintArchive.filament_used_grams` directly, so old archives keep their plate-1-only numbers until a reslice/rescan repopulates `file_metadata`. **Same-shape fix carried forward**: `system.py::system_info` (the System Info page's lifetime totals) summed `PrintArchive.print_time_seconds` / `filament_used_grams` with the identical bug — reprints collapsed to one archive, multi-plate files reported plate-1-only. The route now sums from `PrintLogEntry.duration_seconds` / `filament_used_grams` like the project rollup, so every run contributes its measured per-run actual. **Same-shape fix in the time-accuracy metric** (`archives.py::get_archive_stats`): the metric computed `estimate / actual` per run where `estimate = PrintArchive.print_time_seconds`. Post-parser-fix multi-plate archives have file-level estimate but per-run actual = one plate's duration → ratio ≈ N×100% for an N-plate file (300% for the reporter's 3-plate case), which would drag the printer-level average to noise. The calc now clamps each row to the [50%, 200%] plausibility band before contributing to the average; single-plate accuracy is fully included (the case the metric is designed for), multi-plate plate-by-plate runs and one-off outliers (manual intervention, purge waste blowing the estimate) are excluded. **Tests**: 4 new in `test_archive_service.py::TestMultiPlateSliceInfoSum` — three-plate file sums prediction + weight (the reporter's exact numerics: 7140+6000+6300 → 19440s, 19.2+20.0+18.8 → 58.0g); single-plate path preserves `plate_number` + objects + bed_type; multi-plate ignores per-plate object lists; malformed per-plate values are skipped without poisoning the sum. 4 new in `test_projects_api.py::TestProjectStatsPerRun` — 3 reprints show as 3 jobs with summed totals (matches the reporter's exact 3-run scenario); orphan log entries don't bleed into any project; mixed-outcome archive splits cleanly between `completed_prints` (quantity-weighted) and `failed_prints` (run-counted); list-view quick stats agree with per-project stats. 1 new in `test_archive_run_aggregation.py` — the accuracy band filter excludes multi-plate plate-by-plate runs (estimate 18000s / actual 6000s = 300%) so a single-plate file's near-100% reading stays the printer's average. Two pre-existing assertions updated to reflect the corrected semantics: `archive_count` and `total_archives` now count runs, so files attached but never printed (status `"archived"`) contribute 0 — that's the right answer, not a regression. Full backend suite + ruff clean.
- **Webhook printer-status / stop / cancel routes 500'd on every connected printer because the route treated the PrinterState dataclass as a dict (#1584, reported via in-app bug report)** — Reporter saw `GET /api/v1/webhook/printer/{id}/status` return `500 Internal Server Error` with a valid API key carrying the `read_status` scope, while `GET /api/v1/system/info` returned 200 with the same key — so auth and routing were fine, the handler itself was crashing. Cause: `printer_manager.get_status(printer_id)` returns a `PrinterState` dataclass (`backend/app/services/bambu_mqtt.py`), not a dict. The route at `webhook.py:266-270` called `status.get("connected", False)`, `status.get("state")`, `status.get("current_print")`, `status.get("progress")`, `status.get("remaining_time")` — every one raised `AttributeError`, which Starlette surfaced as a generic 500. Reporter's id-1 (printer exists) returned 500; non-existent ids returned 404 — exactly because the early `Printer not found` branch fired before reaching the crash. Same shape in two adjacent routes: `webhook_stop_print` (`POST /printer/{id}/stop`) and `webhook_cancel_print` (`POST /printer/{id}/cancel`) checked `status.get("connected")` / `status.get("state")` for their precondition gates. 8 crash sites total across the three routes. **Fix**: every `status.get("X", default)` replaced with attribute access (`status.X if status else default`); Pydantic response schema unchanged. `PrinterState`'s dataclass defaults cleanly cover the `status is None` branch (printer registered but never connected — the route now returns 200 with `connected=false, state=null, …` rather than crashing). **Tests** (`backend/tests/integration/test_webhook_printer_status.py`): 7 new — status route returns 200 with the dataclass attributes mapped into the response (regression for the exact #1584 shape); status route returns 200 with sensible defaults when `get_status()` returns None; status route returns 404 for a non-existent printer (control case proving the auth path is unaffected); stop route returns 503 when disconnected (pre-fix would have 500'd here); stop route returns 409 when state is not `RUNNING`; cancel route returns 503 when disconnected; cancel route returns 409 when state is not `RUNNING`/`PAUSE`. Runtime-verified end-to-end against a live PG-backed instance before and after: same key + same printer id, 500 before the patch and 200 with the correct payload after. Full backend suite + ruff clean.
- **Path-traversal CI backstop now recognises markers on the closing-paren line (project-wide convention)** — `test_no_unsafe_path_joins.py::test_route_path_arithmetic_is_safe_joined_or_marked` AST-walks every Path-arithmetic site in `api/routes/` + `services/` and demands either `safe_join_under(...)` or a `# SEC-PATH-OK: <reason>` marker. The marker-detection helper only scanned the BinOp's own line range (`lineno..end_lineno`), but the project's convention puts the marker on the line of the wrapping closing paren — one past `end_lineno`. The backstop flagged 30 already-marked, already-safe sites as findings, masking the fact that the post-GHSA marker work is complete. The helper now peeks one line past `end_lineno` IF that line begins with a continuation token (`)`, `]`, `}`, `,`), capturing exactly this convention without giving a free pass to a marker on a wholly unrelated next statement. 5 new tests in `TestMarkerDetection` pin the contract: marker on the BinOp line recognised; marker on the closing-paren line recognised; an unrelated marker on a later statement does NOT silence; a marker on a non-continuation line right after the BinOp does NOT silence; no marker anywhere is still flagged. Integration test now passes against the existing tree — 30 findings → 0 — with no changes to any guard / sanitisation in routes or services.
- **Deleted local profiles no longer linger in the SliceModal preset dropdown; new manual "Refresh" button surfaces cloud-side deletions without waiting for the 5-minute cache (#1581, reported by @lloydjohnson)** — Reporter saw deleted local AND cloud profiles still appearing in the slice menu after removing them. Two distinct causes wired together. **Local half (real bug)**: `LocalProfilesView`'s import and delete mutations invalidated `['localPresets']` (the Local Profiles management view's own query) but not `['slicerPresets']` — the SliceModal reads from the unified `/slicer/presets` endpoint via a separate React Query key (`SliceModal.tsx:425`, `staleTime: 60_000`), so a freshly-deleted preset kept rendering in the dropdown until the modal's 60 s staleTime elapsed plus a refocus / remount. The backend was correct end-to-end (`delete_local_preset` removes the DB row, `get_db()` auto-commits, `_fetch_local_presets` reads fresh from DB with no backend cache). Both mutations now also invalidate `['slicerPresets']` so the next modal open shows the current set. **Cloud half (by-design backend cache + new opt-in bypass)**: `_fetch_cloud_presets` keeps a 5-minute per-(user, token) in-process cache balancing "users see their freshly-saved presets quickly" against "a busy install doesn't hit Bambu Cloud once per modal open" (`slicer_presets.py:69`). The user deletes cloud presets in Bambu Studio / Bambu Handy, not in Bambuddy, so there's no event hook to invalidate on — the cache only refreshes when the TTL expires. Rather than shorten the TTL (which would effectively rate-limit the cloud for every user), the listing endpoint gains an opt-in `?refresh=true` query param that bypasses BOTH the cloud cache and the 1-hour bundled-preset cache for that one call; the fresh result is still written back so subsequent normal callers still hit cached responses. **New SliceModal "Refresh" button**: lives in the preset section header next to the cloud-status banner, calls `getSlicerPresets({refresh: true})` and writes the fresh slots into the `['slicerPresets']` cache via `queryClient.setQueryData` (so the spinner disappears immediately rather than triggering a second refetch). Spins the `RefreshCw` icon while in-flight; disabled during a slice enqueue so users can't fire it twice. **i18n**: real translations for `slice.refreshPresets` + `slice.refreshPresetsTitle` (action label + tooltip) across all 9 locales per the [[feedback_translate_dont_fallback]] HARD RULE; parity script green at 5007 leaves × 9 locales. **Tests**: 2 new backend in `test_slicer_presets.py` (`refresh=True` re-hits Bambu Cloud even with a warm cache + still writes the fresh result back for the next normal call; same shape for `_fetch_bundled_presets`); 1 new frontend in `LocalProfilesView.test.tsx` asserts the delete flow invalidates `['slicerPresets']` in addition to `['localPresets']` via a spied QueryClient. Full backend suite + frontend vitest + ruff + eslint + i18n parity green.
- **STL thumbnail noise on first generation: matplotlib cache + font_manager scan (reported by @maziggy)** — On first STL upload, three matplotlib-internal log lines surfaced: `WARNING [matplotlib] /opt/claude/.config/matplotlib is not a writable directory` (Bambuddy's `$HOME` isn't writable for the default config path so matplotlib fell back to `/tmp/matplotlib-XXXXXX`), `INFO [matplotlib.font_manager] Failed to extract font properties from NotoColorEmoji.ttf` (matplotlib doesn't support the COLR/COLR1 emoji format; this is per-font), and `INFO [matplotlib.font_manager] generated new fontManager` (the cache was rebuilt). Because the fallback was `/tmp`, every host reboot lost the cache and the font scan ran again. **Fix is in `stl_thumbnail.py` before the matplotlib import**: (a) `_configure_matplotlib_cache()` sets `MPLCONFIGDIR` to `settings.base_dir / .cache / matplotlib` (mkdir'd if missing) so the cache persists across container restarts and the writable-dir warning never fires; respects an externally-set value so operators who chose their own path aren't overridden; best-effort with a debug fallback if settings can't be imported or the mkdir fails. (b) `logging.getLogger("matplotlib.font_manager").setLevel(WARNING)` at module import demotes the per-font INFO scan so the first cold start (before the cache is populated) doesn't surface a multi-line matplotlib preamble. **Tests**: 3 new in `test_stl_thumbnail.py` — the font_manager logger is at WARNING after module import; `_configure_matplotlib_cache` creates the directory under `base_dir` and sets `MPLCONFIGDIR` to point at it; an externally-set `MPLCONFIGDIR` is preserved verbatim.
- **Bulk-upload ZIPs of stub / empty STL files no longer spam the log with thousands of warnings (reported by @maziggy)** — Uploading a ZIP containing many minimal STL stubs (e.g. the 24-byte `solid test\nendsolid test` shape) emitted one `WARNING [backend.app.services.stl_thumbnail] Failed to load STL or empty mesh: <path>` per file. The warnings were technically correct — `trimesh.load(...)` returned a valid Mesh with zero vertices, the safeguard at `stl_thumbnail.py:54` matched, and the function returned None so the library entry got created without a thumbnail — but the volume turned a successful ZIP upload into a journal full of WARNING lines. **Two-step fix**: (1) the per-file message at `stl_thumbnail.py:55` demoted from `logger.warning` to `logger.debug`; this is a per-file content observation, not an actionable error, and the caller already handles None correctly. The branch now catches only the rare "large enough but trimesh still can't parse it" case, still visible in debug logs without spamming production. (2) New module constant `MIN_USABLE_STL_BYTES = 200` (binary STL with one triangle = 80B header + 4B count + 50B triangle = 134B; ASCII STL with one triangle ≈ 150B; 200 is a safe floor below any real STL). Three thumbnail call sites in `library.py` (extract_zip_file ZIP entry path, single-file upload, `_backfill_external_stl_thumbnails`) pre-skip files below this size BEFORE calling `generate_stl_thumbnail`, so stubs / placeholders / corrupted files never enter the trimesh pipeline at all. **What this does NOT change**: behaviour is identical for any real STL — generation still runs, MAX_VERTICES still triggers simplification at 100k vertices for the 256×256 thumbnail render, large files still get thumbnails. **Tests**: 2 new in `test_stl_thumbnail.py` — one verifies `MIN_USABLE_STL_BYTES` sits above the smallest binary (134B), the smallest ASCII (150B), and the reporter's 24-byte stub case; the other writes the verbatim 24-byte stub from the bug report, calls `generate_stl_thumbnail`, and asserts no `WARNING`-level "empty mesh" record appears in `caplog`. Full backend suite green; ruff clean.
- **Bambu Cloud sign-in failures caused by an upstream Cloudflare challenge now surface an actionable message instead of "Invalid response from Bambu Cloud" (#1575, reported by @cliveflint)** — Reporter hit "Invalid response from bambulabs when trying to sign in with authenticator pass code" on a Pi (UK network). Log showed three back-to-back `POST /api/sign-in/tfa` calls all returning Cloudflare's "Just a moment..." HTML interstitial instead of JSON; `backend/app/services/bambu_cloud.py::verify_totp` caught the `json.JSONDecodeError` and returned the opaque "Invalid response from Bambu Cloud" message. **Root cause is Cloudflare-side, not Bambuddy**: a curl from this machine with the same honest `Bambuddy/1.0 (+https://github.com/maziggy/bambuddy)` UA at 2026-06-02 returned a clean `HTTP/2 400 {"code":5,"error":"Login failed"}` JSON — same UA, same headers, different network. CF's bot management appears to flag conditions (per-IP / TLS-fingerprint / rate / transient mitigation window) that don't reproduce from us. No reliable way to *prevent* the challenge from our side without browser impersonation, which is explicitly off the table per the 2026-05-12 compliance audit. **Fix is diagnostic, not bypass**: new `_detect_cloudflare_challenge(response) -> str | None` helper inspects the failed-parse response for CF markers (`"Just a moment..."` in body, `"challenges.cloudflare.com"` in body, HTTP 403 with `cf-mitigated` header, HTTP 503 with `cf-ray` header) and returns a message that attributes the block to Bambu Lab's Cloudflare protection, suggests waiting a few minutes, and tells the user that signing in to bambulab.com from a browser on the same network usually clears the challenge. Wired into all three JSON-parse sites: `login_request`, `verify_code`, and `verify_totp` — previously only `verify_totp` had a defensive catch; `login_request` and `verify_code` let the parse error bubble to `BambuCloudAuthError` with `"Expecting value..."` as the detail, which surfaced as a generic 401 in the UI. **Tests**: 8 new in `TestCloudflareChallengeDetection` (`backend/tests/unit/services/test_bambu_cloud.py`) — direct helper tests for each of the four CF markers, a negative case (real JSON 400 with `cf-ray` header from the actual successful curl response above is NOT misclassified as a challenge so the application-level "Login failed" still surfaces), an attribution check (message must name "Cloudflare" and "bambulab.com" so users can act on it), and full-stack tests covering all three call sites with the verbatim interstitial fragment from the reporter's log. The existing `test_verify_totp_cloudflare_blocked` updated to assert the new actionable message. Full 5486-test backend suite green; backend ruff clean.
- **OIDC auto-provisioning now reads the standard `email` claim for `User.email` when `Email Claim` is set to a non-email identity claim (#1569, reported by @anderl1969)** — Reporter configured Authentik with `Email Claim = preferred_username` to drive username from the preferred_username claim and expected the standard `email` claim (which the ID token also carries) to populate the user's email field. Result: username was correctly set from `preferred_username`, but `User.email` came out empty. Cause: `backend/app/api/routes/mfa.py::_resolve_provider_email` reads only `claims[provider.email_claim]`. With `email_claim="preferred_username"` and `preferred_username="jdoe"`, the value fails the SEC-2 email shape check (no `@`) and returns `None`. The auto-create-users branch then constructs `User(email=None, …)` and stores `UserOIDCLink(provider_email=None)` even though `claims["email"]` carries a perfectly valid `jdoe@example.com`. **Fix**: new helper `_resolve_standard_email_for_user_record(provider, claims, provider_sub)` reads the standard `email` claim independently and applies the same Fall A/B logic (shape check, `require_email_verified` strict / permissive split, explicit `email_verified=False` drop). The auto-create-users branch in `oidc_callback` now resolves `user_email_for_storage = provider_email or _resolve_standard_email_for_user_record(...)` and uses that for both `new_user.email` and the `UserOIDCLink.provider_email` record. **Scope is deliberately narrow**: the fallback is invoked only when `provider.email_claim != "email"` AND the primary resolver returned `None` AND the auto-create-users branch is taken. The auto-link-existing-accounts gate above remains on the primary `provider_email` — it does NOT consult the fallback. This preserves every existing GHSA-shape guard: Fall-B (`email_claim='email'` + `require_email_verified=False`) is still rejected at schema level when paired with auto-link; Fall-C (custom claim) auto-link still depends on the custom claim's shape, never on the standard `email` claim. New email fallback path runs the same shape + `email_verified` enforcement as Fall-A/B for the standard `email` claim, so an attacker-controlled IdP that sets `email_verified=False` or sends a malformed value gets dropped exactly like it would on the primary path. **Tests**: 4 in `TestOIDCStandardEmailFallback` (`backend/tests/integration/test_mfa_api.py`) — `email_claim=preferred_username` with both claims present → username from `preferred_username`, email from standard `email`; `email_claim=preferred_username` with no standard `email` claim → email stays `None` (behaviour unchanged); standard `email` with `email_verified=False` → fallback drops, email stays `None`; `email_claim="email"` (default) with `email_verified` absent → fallback path does NOT fire (Fall-A semantics preserved). Full 5478-test backend suite green. Backend ruff clean.
- **Sliced `.gcode.3mf` files now render in the 3D preview and expose a Preview-3D action in the file row (#1543, reported by @Vlado-Tarakan)** — Reporter exported a multi-plate `.gcode.3mf` from Bambu Studio to the shared folder Bambuddy watches and the 3D preview tab came up empty; if he re-uploaded the same file via the file manager, the preview worked. Root cause: two paths classify `file_type` differently. `backend/app/api/routes/library.py:1343-1348` (the shared-folder scan path) does a compound-extension check and tags the file `gcode.3mf`; the upload path at the same file's `1588` does a single `ext[1:]` and tags it `3mf`. Then `frontend/src/components/ModelViewerModal.tsx:71-73` had `hasModel = normalizedType === '3mf' || 'stl'` and `hasGcode = normalizedType === 'gcode' || '3mf'` — neither matched `gcode.3mf`, so the capabilities object landed with both flags false and the modal rendered an empty bed. `FileManagerPage.tsx:858` also gated the Preview-3D context action on `file_type === '3mf' || 'gcode' || 'stl'`, so for shared-folder files the entry didn't even appear, and the type pill at `765-770` had no colour case for `gcode.3mf` so it fell through to the generic gray. **Fix** (frontend-only, no backend churn): `ModelViewerModal.tsx` introduces an `isThreeMfFamily = normalizedType === '3mf' || normalizedType === 'gcode.3mf'` predicate used in two places — the capabilities branch (`hasModel = isThreeMfFamily || 'stl'`, `hasGcode = isThreeMfFamily || 'gcode'`) and the plates-loading branch that previously hard-gated on `!== '3mf'` and would have returned `setPlatesData(null)` for the shared-folder file. `FileManagerPage.tsx` adds `gcode.3mf` to the Preview-3D action gate and shares the gcode blue type-pill colour so sliced-output files are visually distinguishable from source 3MFs. The compound `gcode.3mf` classification on the backend is intentionally preserved — it carries useful "this is a sliced output" semantics that other UI surfaces could use later. The `canOpenInSlicer` and `sliceableType` checks at `ModelViewerModal.tsx:269, 277-280` are deliberately left alone — a sliced output isn't openable in the slicer, and `sliceableType` already explicitly excludes `.gcode` and `.gcode.3mf` per the comment "the file type can't be sliced". **Out of scope** (separate Bambu-Studio format limitation, not a Bambuddy bug): Vlado's secondary observation that the upload-path 3D preview "shows only one plate" even though his project has 5 plates — Bambu Studio's `.gcode.3mf` export contains the g-code and model data for the active plate only, not the entire multi-plate project. The print picker enumerates plates via `gcode_*.gcode` entries inside the zip (a separate code path), which is why the user can still pick the plate at print time. The empty-bed fix is the data point that closes the user-visible bug. **Tests**: existing full 2043-test frontend suite green; no test asserted on the unsupported `gcode.3mf` capabilities branch (the change is additive — `3mf` and `stl` and `gcode` behaviours are unchanged). Frontend build clean.
- **Connected-edge reconciliation closes the missed-PRINT-COMPLETE loop that produced ghost replays on smart-plug power cycles (#1542 follow-up, reported by @vixussrl-ui)** — Reporter ran a fresh trace after the doubled-extension fix landed and found a distinct second cause behind his ghost prints, hitting 4-of-4 of his A1s. Timeline: 22:50 PRINT START → print runs all night → MQTT disconnects multiple times (A1's keepalives are unstable on his network) → print finishes during one of those disconnect windows so PRINT COMPLETE is never observed → smart plug cuts power on idle → power resumes for the next scheduled print → firmware auto-replays the leftover `.3mf` from the SD card → Bambuddy reconnects to a fresh PRINT START for the ghost. The existing IDLE-after-RUNNING completion check at `backend/app/services/bambu_mqtt.py:3022` was meant to catch the simple disconnect-then-finish case via `_previous_gcode_state` preserved across reconnects, but with multiple disconnect/reconnect cycles + a smart-plug power-off that Bambuddy can't distinguish from any other transient drop, the IDLE window that branch needs simply never reaches it. The SD `.3mf` lingers, the firmware ghost-replays every power cycle, and the loop repeats until the operator notices. **Fix**: a new connected-edge reconciliation pass — new `reconcile_stale_active_prints(printer_id)` in `backend/app/main.py` queries archives in `status="printing"` for the printer at MQTT (re)connect time and synthesises `on_print_complete(status="aborted")` for any whose print can't actually be running anymore. The decision is made by a pure `_is_active_archive_stale(archive, state)` function with three triggers: (1) current printer state is terminal (IDLE / FINISH / FAILED) — covers the clean disconnect-then-finish case the existing #3022 branch was already trying to handle; (2) printer is running but with a different `subtask_id` than the archive — Bambu firmware mints a fresh `subtask_id` for each print including the ghost-replay it runs after a power cycle, so a mismatch is unambiguous evidence the in-DB archive is no longer the print on the printer; (3) printer is running but `subtask_name` is empty — the printer doesn't know what it's running, archive reference is broken. PAUSE / PREPARE / SLICING / RUNNING with matching subtask are intentionally left alone — false positives there cost a single misreported "aborted" status that the real PRINT COMPLETE would have overwritten anyway, while a false negative is the ghost-print loop being reported. The synthesised `on_print_complete` reuses the existing chain (SD cleanup, status update, usage tracker, notifications) — no reimplementation, no duplicate event when real completion later fires (the second call sees `status != "printing"` and falls through). Status `"aborted"` is the conservative label; we have no progress evidence to promote to `"completed"`. **Wiring**: new `_printer_reconciled_since_connect: dict[int, bool]` edge tracker at module scope, checked at the start of `on_printer_status_change` — when `state.connected` flips False → True (which covers both Bambuddy startup with no prior connection AND a mid-session MQTT reconnect), reconciliation fires exactly once for that connection. Setting the edge to True BEFORE the spawned task starts prevents concurrent status updates within the same connection from re-triggering it. **Concurrency**: reconciliation runs as `asyncio.create_task` so it doesn't block the WebSocket dedup / broadcast logic that on_printer_status_change is the hot path for. **Ghost-print collateral worth being explicit about**: if the ghost is already running when reconciliation fires, the synthesised SD-cleanup will hit 550-file-locked (firmware locks the file during print, same cause as the #1542 first case). The cleanup retries 3× then logs "lingering" — same as any other in-print cleanup attempt. The ghost runs to completion, its own end-of-print cleanup deletes the file, and the next power cycle has nothing to replay. The loop breaks even when reconciliation can't physically delete the file mid-ghost. A perfect cancel would require sending a `print_stop` MQTT command to the printer, which is invasive and explicitly out of scope. **Tests**: 21 in `test_reconcile_stale_active_prints.py` — `TestIsActiveArchiveStale` covers all three stale triggers with case-insensitive state matching, the four healthy-no-op cases (RUNNING / PAUSE / PREPARE / SLICING with matching subtask), the IDLE-overrides-subtask-match precedence, and the missing-subtask_id edge cases that fall through to the subtask_name check. `TestReconcileStaleActivePrints` covers the orchestrator: no-status, disconnected-status, and no-active-archives all short-circuit; a stale archive produces a synthesised `on_print_complete(status="aborted", _reconciled=True)` payload with the archive filename; a healthy in-flight archive doesn't fire any completion; an exception inside one archive's synthesis doesn't block the rest or propagate to the caller. Full 5399-test backend suite green (5378 + 21 new). Backend ruff clean.
- **Fallback-archive MQTT filament extraction now actually fires for real prints (#1533 follow-up, reported by @JmanB52D)** — Reporter updated to 0.2.5b1 expecting the #1533 fix to populate filament fields on his P2S virtual-printer prints when the .3mf is locked. His support bundle showed Bambuddy still creating fallback archives with NULL filament fields even though the print-start log line proved AMS-0-T0 had PETG loaded at the moment the helper should have read it (`AMS 0: T0(type=PETG, color=FFFFFFFF, …)`). Cause: the #1533 helper `_extract_filament_data_from_mqtt(data)` in `backend/app/main.py` only looked at `data["ams"]`, but the dict that `on_print_start` actually receives at runtime is the wrapper shape `{"filename", "subtask_name", "remaining_time", "raw_data": <mqtt_payload>, "ams_mapping"}` that `backend/app/services/bambu_mqtt.py:2971-2980` constructs — so `data["ams"]` was undefined on every real call and the helper silently returned `{}`, leaving the fallback archive's `filament_type` / `filament_color` NULL. The 15 unit tests that shipped with #1533 all passed the bare inner shape directly and never exercised the callback wiring, so the regression slipped through the green build. **Fix**: the helper now resolves `data["raw_data"]["ams"]` first (the callback shape) and only falls back to `data["ams"]` when the wrapper isn't present (preserves the inner-shape callers from the existing tests). Defensive: a non-dict `raw_data` (e.g. partial MQTT decode failure) falls through to the inner lookup instead of crashing. **Tests**: 5 new in `TestOnPrintStartCallbackShape` (`backend/tests/unit/test_fallback_archive_mqtt_filament.py`) — wrapper payload with ams_mapping resolves to the inner data; wrapper with no ams_mapping lists all loaded slots; the existing inner-shape callers still work after the additive wrapper lookup; missing `raw_data` returns `{}` instead of raising; junk `raw_data` (string) doesn't shadow a present inner `ams`. Full 5378-test backend suite green. Backend ruff clean. **What this does NOT fix**: per-filament gram usage still needs the actual .3mf — the printer locks it during print (P-line firmware behaviour, not a Bambuddy bug), and the existing 19 FTP candidate paths + directory probes are expected to 550 in that window. Per-print filament type and colour are the data point that drives the AMS-expansion planning the reporter explicitly called out, so this is the fix that moves the needle for him.
- **Assigning a spool no longer shows a profile-mismatch warning when only the slicer profile differs, and the warning now states the AMS slot will be reconfigured (#1552, reported by @anthonyma94)** — Reporter assigned a spool to a slot whose stored slicer profile (e.g. "Bambu PLA Matte") differed from the new spool's profile (e.g. "Bambu PLA Basic"), got a warning popup with only Cancel / Assign Anyway, and was under the impression that confirming the popup just linked the spool in Bambuddy's DB without touching the AMS — i.e. that he then had to manually open Configure AMS Slot to push the new profile to the printer. The auto-push has actually been in place since the assign route existed: `backend/app/api/routes/inventory.py::assign_spool` calls `apply_spool_to_slot_via_mqtt` after upserting the SpoolAssignment row, which publishes both `ams_filament_setting` (tray_info_idx, tray_sub_brands, color, temps) and `extrusion_cali_sel` (K profile) over MQTT, and `backend/app/api/routes/spoolman_inventory.py::assign_spoolman_slot` does the same on the Spoolman side. The only short-circuit is when the firmware explicitly reports the slot empty (`tray_state ∈ {9, 10}`), in which case `main.py::on_ams_change` deferred-replays the configure as soon as a spool appears. So the popup was creating friction without revealing what it actually did. **Two changes**: (1) `AssignSpoolModal.tsx` + `spoolbuddy/AssignToAmsModal.tsx` no longer fire the mismatch popup for *profile-only* mismatches — `if (materialMatchResult !== 'exact')` replaces the old `materialMatchResult !== 'exact' || !profileMatches`, and the `'profile'` member is dropped from the `mismatchType` union (the standalone profile branch in both popup render bodies is removed as dead code). Material mismatch — where Bambu firmware can refuse the print because the type is wrong — still warns. (2) Every firing warning (material, partial, material+profile, partial+profile) now appends a new line via the new `inventory.assignReconfigureNote` i18n key: "The AMS slot will be reconfigured to use the spool's profile." This makes the Assign Anyway button's effect explicit instead of leaving users to guess. **i18n**: real translations across all 9 locales per [[feedback_translate_dont_fallback]]; parity script clean at 4999 leaves per locale. **Tests**: existing 14 `AssignSpoolModal` + 7 `AssignToAmsModal` tests pass unchanged — no test asserted on the profile-only popup firing. Frontend build clean, full 2043-test suite green. **Open follow-up**: if anthonyma94 confirms after this change that his slot *still* shows the old profile after Assign Anyway, the real bug is in `apply_spool_to_slot_via_mqtt`'s tray_info_idx / setting_id resolution for his specific spool shape — would need his spool's `slicer_filament` value plus the live tray state to diagnose.
- **Transparent / clear filament now selectable and rendered as transparent end-to-end in the built-in inventory (#1545, reported by @Synec5, confirmed by @CMW-ISS)** — Reporter wanted to select a transparent filament colour in the spool editor; CMW-ISS independently confirmed on v0.2.5b1 that AMS-detected transparent spools were silently labelled "Black" in the filament-mapping dropdown because the colour name resolver dropped the alpha byte and the underlying RGB `000000` HSL-bucketed to "Black". Spoolman already supported 8-digit `RRGGBBAA` hex; the built-in inventory didn't. Five distinct sites collapsed alpha → 6-char RGB and had to be fixed together: (a) `frontend/src/utils/colors.ts` — `hexToColorName`, `getColorName`, `resolveSpoolColorName`, and `isLightColor` now short-circuit to `"Clear"` when the input is 8 chars with alpha `00`, before either the catalog lookup or the HSL fallback can mislabel transparent as black; `isLightColor` returns `true` for clear so text contrast matches the light/mid-gray checkerboard underlay the swatch paints. (b) `frontend/src/utils/amsHelpers.ts::normalizeColor` no longer unconditionally strips the alpha byte — it preserves `#RRGGBBAA` when alpha < `FF` so the AMS-side colour reaches CSS `fill=` / `backgroundColor` as a translucent value instead of a solid one; opaque colours still emit `#RRGGBB` and `normalizeColorForCompare` (which DOES strip alpha) is unchanged so type/colour matching for auto-mapping is unaffected. (c) `backend/app/api/routes/printers.py::get_available_filaments` no longer truncates `tray_color` to 6 chars before emitting it on `/printers/available-filaments` — both the AMS and `vt_tray` branches now pass the full `#RRGGBBAA` through; the dedup key still uses the 6-char RGB so two slots that share an RGB but differ only in alpha still merge into one filament requirement. (d) `frontend/src/components/spool-form/constants.ts` gained a `{ name: 'Clear', hex: '00000000' }` entry to `QUICK_COLORS` — the only 8-char preset, because the native `<input type="color">` can't pick alpha and a dedicated swatch is the only UX that lets the user actually choose transparency. (e) `frontend/src/components/spool-form/ColorSection.tsx` reworked the hex draft contract: previously the hex input was hardcoded to 6 chars and every commit path unconditionally appended `'FF'`, so even pasting `00000000` got truncated to `000000FF` (solid black). Now: the draft accepts up to 8 hex chars; a 6-char commit appends `FF`, an 8-char commit passes through verbatim; on blur a 7-char draft (RGB + one alpha nibble) right-pads the nibble to `0` instead of jumping back to 6-char-pad-RGB; the `selectColor()` helper that the preset swatches call only appends `FF` when the preset is 6 chars, so the new `Clear` swatch lands as `00000000` in `formData.rgba` instead of `00000000FF`. `currentRgba` is canonicalised to 8 chars uppercase and `isSelected()` matches on the full rgba so `Clear` (`00000000`) doesn't collide with `Black` (`000000FF`) in the swatch highlight. (f) Two new shared helpers in `frontend/src/utils/colors.ts` — `getSwatchStyle(rgba)` returns a `{ backgroundColor }` for opaque colours and a `{ backgroundImage, backgroundSize }` 8px checkerboard for alpha=00 (use for div / button backgrounds); `spoolColorString(rgba)` returns a hex string that preserves the alpha byte when alpha < FF (use for SVG `fill=` props and other single-string colour contexts where the consumer can interpret 8-char hex natively). Applied to every simple-swatch site that previously did `style={{ backgroundColor: '#' + rgba.slice(0, 6) }}` or passed a 6-char fill to an SVG icon — those sites would have rendered Clear spools as solid black after the cream rewrite was removed: the three preset rows in `ColorSection.tsx` (recent / catalog / fallback), the spool checkbox swatch in `LabelTemplatePickerModal.tsx`, the per-card colour dot + the SVG `SpoolCircle` in `SpoolBuddyInventoryPage.tsx`, the assigned-spool indicators in `SpoolBuddyAmsPage.tsx` (both internal and Spoolman branches), the four selected-spool summary swatches + the simple-view's spool dot in `SpoolBuddyWriteTagPage.tsx`, the lead-spool indicator in `ForecastPanel.tsx`, the header swatch in `AssignToAmsModal.tsx`, the two spool-list dots in `AssignSpoolModal.tsx` (internal + Spoolman columns), and the `SpoolIcon` fed by `InventorySpoolInfoCard.tsx` / `TagDetectedModal.tsx` / `SpoolInfoCard.tsx` / `LinkSpoolModal.tsx` (which now pass the full 8-char rgba — SVG `fill=` interprets translucent values correctly). `FilamentSwatch.tsx`'s tooltip title fallback also widened so the on-hover hex code shows `#00000000` for a Clear spool instead of misreporting it as `#000000`. **What is intentionally NOT changed**: the native `<input type="color">` value in `SpoolBuddyWriteTagPage.tsx`'s simple-view picker keeps its 6-char hex — that input element doesn't support alpha, and its onChange handler still sets rgba back to opaque `FF` (which is correct behaviour: the user explicitly picked a colour via the picker, not transparency). The colour-sort comparator in `LabelTemplatePickerModal.tsx::colorSortKey` keeps its 6-char alpha-strip — transparent spools sort into the same bucket as black/neutrals which is the right behaviour for ordering. The label-renderer in `backend/app/services/label_renderer.py` keeps its 6-char alpha-strip in `_hex_code_label` because the printed text on a physical label can't show transparency — `_color_from_hex` does honour the alpha byte for the printed swatch fill (alpha=00 → invisible swatch on the label, which is the honest physical answer). The Spoolman auto-sync's `_find_or_create_filament` in `backend/app/services/spoolman.py` still strips alpha when looking up the Spoolman catalog because Spoolman's filament catalog schema only supports 6-char `color_hex` — a transparent AMS spool synced into Spoolman will now match against a `000000` (Black) Bambu Lab filament entry instead of the pre-fix synthetic "PLA Basic" cream entry (RGB `F5E6D3`); both are inaccurate, the post-fix behaviour is at least honest about which colour the catalog has chosen rather than silently inventing a cream spool — users on the Spoolman backend can manually correct the filament assignment if desired. (g) **Removed the cream rewrite** at `backend/app/services/spoolman.py::parse_ams_tray` that silently replaced AMS-reported `00000000` with `F5E6D3FF` ("Light cream/natural color"). That rewrite was a workaround from when the swatch renderer couldn't show alpha — `filamentSwatchHelpers.ts::buildFilamentBackground` already paints a checkerboard underlay for alpha < FF (added in #1154), so the rewrite has been hidden technical debt that made every AMS-detected transparent spool land in inventory as cream instead of clear, with no signal to the user that a colour was substituted. AMS-synced spools now keep their true `00000000` value; the swatch renders the checkerboard; `getColorName` resolves to "Clear". (h) `backend/app/services/spool_tag_matcher.py::create_spool_from_tray` short-circuits the colour-catalog lookup when `rgba` is alpha=00 and stores `color_name="Clear"` directly — without this, a Bambu-RFID transparent spool would resolve against the `#000000` row in the catalog (or `Black` via the HSL fallback) before the frontend's name resolver ever sees it, defeating the alpha-aware fix in `colors.ts`. **Tests** — `src/__tests__/utils/colors.test.ts`: 5 new assertions covering alpha=00 → "Clear" for `hexToColorName`, `getColorName` (including precedence over a catalog entry on the same RGB), and `resolveSpoolColorName`; one existing assertion changed from `12345600` (which now correctly resolves to "Clear") to `123456FF` to keep its intent of "unknown opaque colour returns null". `src/__tests__/components/spool-form/ColorSectionHexInput.test.tsx`: header docblock rewritten to reflect the new 0–8 char draft contract; the "truncates 7–8 char pastes to RGB" test replaced with two new tests — `'0011223344'` paste now truncates to the leading 8 chars (`00112233`) and commits verbatim with no `FF` append, and a 7-char draft on blur pads to 8 with a trailing `0` instead of jumping back to RGB. 17 colours tests, 9 hex-input tests, 53 useFilamentMapping tests, 14 FilamentOverride tests, 10 FilamentSlotCircle tests, 6 `/printers/available-filaments` integration tests, 50 Spoolman API integration tests all green. Backend ruff clean; frontend build clean; i18n parity clean at 4998 leaves per locale. **What this does NOT change**: Spoolman-mode parity is preserved — Spoolman's own picker already supported 8-digit hex and `inventory.py:119` / `spoolman.py:887-889` already passed `00000000` through verbatim (the 6→8 char `FF` pad only fires when `len == 6`), so no parallel mutation is needed on the Spoolman-mode write path. Existing inventory rows that were *already* rewritten to `F5E6D3FF` stay as cream until the next AMS sync overwrites them — a one-time edit is the only path to recover them, and dropping the rewrite means future AMS syncs land the true value.
- **Virtual-printer MQTT no longer drops idle slicer connections at exactly 60 s (#1548, reported by @hollajandro)** — Reporter pointed OrcaSlicer at a Bambuddy virtual printer and got a clean MQTT/TLS connect, successful auth, and a normal pushall/get_version exchange — then the slicer dropped exactly ~60 s later, every time, even after a fresh trust of the VP CA, a logged-out Bambu account, and toggling VP mode. Trace from his support bundle: 5 consecutive connect→disconnect cycles all exactly 60 s apart, with no intervening client packets after the initial exchange. Root cause: `backend/app/services/virtual_printer/mqtt_server.py::_handle_client` used a **hardcoded `timeout=60` on every per-packet read**, and `_handle_connect` two functions below explicitly skipped the keepalive field from the CONNECT payload (`# Skip keepalive` / `idx += 2`). So no matter what the client negotiated, the VP server would close the socket after 60 s of silence — and OrcaSlicer's normal pattern after the initial exchange is to sit quietly waiting for the printer to push status updates, which a virtual printer with no real state changes doesn't do. The real Bambu firmware honours the client's keepalive (MQTT spec §3.1.2.10 / §4.4: server must allow 1.5× the negotiated value before disconnecting), which is why Orca works against a real P1S but failed at exactly 60 s against the VP. **Fix**: `_handle_connect` now parses the 2-byte big-endian keepalive value from the CONNECT payload and returns it alongside the auth bool (`tuple[bool, int]`). `_handle_client` uses that to set its per-packet read timeout to `1.5 × keep_alive` after a successful CONNECT, or `None` (no timeout) when the client opted out with `keep_alive == 0` per spec. The 60 s default is retained for the *initial* read before CONNECT arrives, so a TCP-connect-but-never-send still gets reaped. **Tests**: 7 in `test_vp_mqtt_server.py` — `TestHandleConnectKeepalive` (4: returns negotiated value on success, returns 0 for opt-out, returns `(False, 0)` on auth fail / parse error so the caller's tuple-unpack never crashes), `TestHandleClientHonoursKeepalive` (3: idle client with `keep_alive=180` is still alive past the old 60 s boundary; `keep_alive=2` closes idle in ~3 s; a PINGREQ inside the window resets the timeout and the connection exits via DISCONNECT instead of timeout). The integration-style tests feed a synthetic CONNECT into a real `asyncio.StreamReader` and drive the handler on an event loop, so the timeout math is exercised end-to-end, not just unit-mocked. Backend ruff clean.
- **A1 no longer auto-replays the previous print after a power cycle when the library row's filename has a doubled `.gcode.3mf` (#1542, reported by @vixussrl-ui)** — Reporter has seven A1s powered through Tuya smart plugs + Home Assistant. After every plug-driven auto-off, turning the printer back on would sometimes start the previous print on its own. Trace from his support bundle: the library row in his DB had `archive.filename = "Cube (1).gcode.3mf.gcode.3mf"` — the `.gcode.3mf` suffix had been appended twice somewhere during the file's import. The dispatcher's `archive.filename` → SD-card-name derivation only stripped ONE trailing `.gcode.3mf`, so the upload landed at `/Cube_(1).gcode.3mf.3mf`. The print ran fine, but the post-print SD cleanup in `main.py` derived its delete target from `subtask_name + ext` (`/Cube_(1).3mf`, `/Cube_(1).gcode`) — neither matched the actually-uploaded path, both 550'd three times, and the real file lingered on the SD card. On next power-up the A1 firmware picked up the leftover .3mf at the SD root and started printing it, exactly like the P1S behaviour the original Issue #374 cleanup was meant to prevent. **Two structural fixes, both shipped together** (no follow-ups per [[feedback_no_followups]]): (1) **shared name derivation**. New `derive_remote_filename(filename)` helper in `backend/app/utils/filename.py` iteratively strips trailing `.gcode.3mf` / `.3mf` suffixes until the bare stem remains, then appends a single `.3mf` and underscore-replaces spaces (the firmware parses `ftp://{filename}` as a URL, spaces break it). Iterative strip handles the doubled-suffix data; the previous single-iteration strip silently fell through to "append .3mf to whatever's left", which is how doubled extensions ended up on the SD card in the first place. The helper is the single source of truth for the SD-card target name — three previously-duplicated upload sites now route through it: `_run_reprint_archive` and `_run_print_library_file` in `backend/app/services/background_dispatch.py`, and the queue dispatch in `backend/app/services/print_scheduler.py`. (2) **cleanup uses the same algorithm as upload**. The post-print SD cleanup in `main.py` now fetches `archive.filename` when `archive_id` is resolved and tries `derive_remote_filename(archive.filename)` FIRST, with the legacy `/{subtask_name}.3mf` and `/{subtask_name}.gcode` paths kept as fallbacks for archive-less prints (subtask never matched any archive) and for older naming variants. De-duped when the primary target equals one of the fallbacks, so the happy-path delete count is unchanged. On the reporter's case the new primary candidate is `/Cube_(1).gcode.3mf.3mf`, matching the on-card file and deleting it cleanly — no more ghost print. **Out of scope** (separate concern): the upstream import path that produced the doubled `.gcode.3mf.gcode.3mf` filename is not addressed here — the iterative strip in `derive_remote_filename` defends against it everywhere it matters (upload target, cleanup target), so any future user with the same legacy data still gets clean dispatch and cleanup. **Defensive hardening caught in the first integration run**: the initial helper had no input type check, just a `while True` strip loop with `endswith` / slice. When a unit test mock (`unittest.mock.MagicMock`) was passed in by accident via the new cleanup path, `mock.endswith(".gcode.3mf")` returned a truthy `MagicMock` on every iteration and the slice `stem[:-10]` returned another `MagicMock` — the loop never reached the `else: break` branch. Each iteration allocated a fresh `MagicMock` until the LXC cgroup OOM-killer reaped the pytest worker at 61 GB anon-rss (visible in `journalctl -k` as `oom_memcg=/lxc/109` with `CONSTRAINT_MEMCG`). Fixed by adding an `isinstance(filename, str)` guard that raises `TypeError` instead of entering the loop — turns the silent infinite allocation into a loud, debuggable error. The same guard protects production: if a corrupt DB row or ORM edge case ever surfaces a non-str `archive.filename`, the cleanup logs a warning via its outer `try/except` instead of OOMing the backend. **Tests**: 10 in `TestDeriveRemoteFilename` in `test_filename_validation.py` (single `.gcode.3mf` strip, single `.3mf` strip, bare stem appends `.3mf`, space→underscore, the literal `Cube (1).gcode.3mf.gcode.3mf` reproducer from #1542 → `Cube_(1).3mf`, doubled `.3mf.3mf`, mixed `.gcode.3mf.3mf`, raw `.gcode` preserved as `.gcode.3mf` since `.gcode` alone is a valid sliced file, idempotence — running the helper on its own output is a no-op, Unicode stem preserved, **type guard** — `MagicMock` / `None` / `int` inputs all raise `TypeError` with a clear message instead of entering the loop). 315 dispatch + print-complete-path tests green (`test_phantom_print_hardening.py`, `test_print_start_assigns_printer_id_to_vp_archive.py`, `test_print_start_expected_promotion.py`, `test_cost_tracking.py`, `test_print_queue_api.py`'s `TestAbortedStatusNormalisation` — which was the suite that originally OOM'd, now passes in 2 s serial / 12 s under `-n 30`). Backend ruff clean.
- **Print filenames with FAT32-illegal characters now rejected at rename/upload/queue time instead of failing at FTP (#1540, reported by @anthonyma94)** — Reporter could rename a library file to `L|R.3mf`, and the PUT `/library/files/{id}` endpoint accepted it because `library.py:4011` only blocked `/` and `\`. The pipe (and the rest of the FAT32/exFAT-illegal set `< > : " / \ | ? *`, control chars, trailing dots/spaces) flowed through to FTP upload time, where the printer's SD card rejected the create with `553 Could not create file` — far from the rename action that caused it. Bambu Studio refuses these names client-side in its save dialog; Bambuddy now does the same. **Fix**: new `backend/app/utils/filename.py` exporting `validate_print_filename(name)` and `InvalidFilenameError` — single source of truth for the rejected set (Bambu-Studio-parity: the nine chars above, control codes 0x00-0x1F, empty/whitespace-only, bare `.`/`..`, trailing space or dot, and 255 UTF-8 bytes max). Wired into three boundaries: (a) `update_file` at `library.py` replaces the path-separator-only check; (b) `upload_file` at `library.py` rejects bad multipart-upload filenames before they're persisted; (c) `print_library_file` adds a pre-flight check so older library rows that pre-date the rename validation fail with an actionable 400 instead of an obscure FTP 553; (d) `add_to_queue` at `print_queue.py` same pre-flight so queued files don't sit waiting just to fail at dispatch. The print/queue checks deliberately refuse rather than auto-rename — silently rewriting user filenames was the wrong UX (Studio doesn't, and the user explicitly chose that name). Existing rows with illegal names are left alone; users see a clear error pointing at rename. **Frontend**: the rename modal in `FileManagerPage.tsx` now mirrors the same character set client-side, shows the offending char inline as a red error below the input, and disables the Rename button while invalid — matches Bambu Studio's instant feedback rather than a round-trip-to-400. **i18n**: new `fileManager.invalidFilenameChar` key with real translations across all 9 locales (de/es/fr/it/ja/pt-BR/zh-CN/zh-TW + en) per [[feedback_translate_dont_fallback]]; parity script clean at 4998 leaves per locale. **Tests**: 26 in `test_filename_validation.py` (parameterised over every char in `INVALID_FILENAME_CHARS`, the exact `L|R.3mf` reproducer from the bug, empty/whitespace/`.`/`..`, control chars, trailing space/dot, byte-length cap with multi-byte UTF-8 to verify it's bytes not codepoints). Backend ruff clean; frontend build clean.
- **Fallback archives now carry MQTT-derived filament type + colour when the 3MF can't be downloaded (#1533, reported by @JmanB52D)** — Reporter (lead of a maker-space 3D Fab area) was evaluating Bambuddy partly to count filaments per print for AMS expansion planning; print log was showing "—" in the filament column for every job. Trace: a P2S in VP proxy mode where the slicer's .3mf upload lands on the real printer's SD card, then the printer locks the file mid-print and refuses every FTP read (the existing fallback-archive code path in `main.py:2596`, originally added for P1S/A1 printers, anticipates this: *"FTP has file size limitations"* — same effective behaviour on P2S). The user log shows ~12 FTP candidate paths attempted on every print start, every one returning 550, then directory listings on `/cache /model /data /data/Metadata` also returning 550, then the fallback archive being created with `file_path=""` and **every filament column NULL** — even though the MQTT print-start payload already had the AMS state and the slicer's slot-per-print-filament mapping sitting in `data["ams"]["ams"]` / `data["ams_mapping"]`. **Fix**: new `_extract_filament_data_from_mqtt(data, ams_mapping)` helper in `backend/app/main.py` (placed next to the existing `_get_start_ams_mapping`) walks `data["ams"]["ams"][*].tray[*]` to build a global-tray-id → (tray_type, tray_color) map, then narrows to slots referenced by `ams_mapping` if present (slicer order preserved; -1 entries for VT-tray skipped), or falls back to every loaded slot otherwise. Output is a comma-separated `filament_type` + `filament_color` in the same shape the 3MF extractor produces — so the inventory page, Quick Stats filament rollup, and `len(filament_type.split(','))` per-print count all light up identically for fallback rows. Truncated to the model's column limits (50 / 200). Defensive against malformed MQTT shapes (non-dict entries, non-int ids, missing fields) since this runs in the print-start hot path and a raise would break print logging entirely. The fallback `PrintArchive(...)` constructor now passes `filament_type=` / `filament_color=` from the helper. **What this is NOT**: not per-filament gram usage (that needs the 3MF's `slice_info.config` or a deep AMS layer-delta integration via `usage_tracker`) — only types and colours. The user explicitly asked for "the number of filaments used to know if or when we need to expand AMS units", which is exactly what this gives them (`SELECT COUNT(DISTINCT split(filament_type, ',')) ...` or the existing inventory count surfaces). A separate, larger piece of work to capture the .3mf in VP proxy mode at upload time (by sniffing FTP STOR in `tcp_proxy.py`) is the real long-term fix for any user who wants full 3MF-derived archive metadata in proxy mode; it's not bundled here. **Tests**: 15 in `test_fallback_archive_mqtt_filament.py` (`backend/tests/unit/`) covering: empty / malformed / no-loaded-slot payloads return `{}`; the no-mapping path lists every loaded slot in ascending global-id order with colours uppercased; an `ams_mapping` filters to and reorders by the slicer's order; VT-tray sentinels (`-1`) are filtered; dual-AMS layouts resolve `unit*4 + tray` correctly across units; a mapping pointing at unknown slots falls through to the known subset, but an entirely-unknown mapping returns `{}` rather than misreporting from the all-slots fallback; both column-limit truncations enforced; missing-colour-but-present-type emits `filament_type` only; defensive against non-dict/non-int garbage in the AMS list without raising. Existing 22 print-start unit tests untouched and green. Backend ruff clean.
- **SpoolBuddy: Tare status banner no longer sits at "Waiting for device..." forever (#1536, reported by @flom89)** — On the SpoolBuddy kiosk's Settings → Scale (Waage) tab, pressing TARE wrote the "Tare command sent. Waiting for device..." banner but had no mechanism to resolve it. The daemon writes back through `POST /spoolbuddy/devices/{id}/calibration/set-tare` (which stamps `tare_offset` + `last_calibrated_at` on the device row), the device list query already polls every 10 s, but `handleTare` in `frontend/src/pages/spoolbuddy/SpoolBuddySettingsPage.tsx` was set-and-forget — the banner persisted indefinitely. The "Calibration complete!" banner on the full calibration flow had the same shape and stayed forever too. **Fix**: a completion watcher that snapshots `device.last_calibrated_at` when TARE is pressed, sets an `awaitingTareSince` state, invalidates the device-list query every 1 s while that state is active (so detection responds within ~1 s instead of waiting on the 10 s background poll), and when `last_calibrated_at` advances past the snapshot flips the banner to "Tare complete!" with a 3 s auto-dismiss timer. A 15 s timeout on the watcher fails open to "Tare timed out — is the SpoolBuddy daemon running?" so a dead daemon doesn't leave the user staring at the spinner. The Calibration-complete success banner and the calibration-failed error banner now share the same auto-dismiss helper (3 s success, 5 s error). All timers are owned by a `useRef` that cleans up on unmount; pressing TARE while a previous dismiss is queued cancels the old timer. **i18n**: two new keys (`spoolbuddy.settings.tareComplete`, `spoolbuddy.settings.tareTimedOut`) translated into all 9 locales (de/es/fr/it/ja/pt-BR/zh-CN/zh-TW + en) per [[feedback_translate_dont_fallback]] — no English fallbacks. Parity script passes at 4997 keys × 9 locales. Frontend build clean.
- **ntfy notifications: honest User-Agent + actionable error when the server is behind a Cloudflare challenge (#1534, reported by @apizz)** — Reporter pointed an ntfy server behind a Cloudflare Tunnel at Bambuddy and got `HTTP 403: <!DOCTYPE html>...Just a moment...` on every Test click. They reproduced the same response with a plain `curl -H "Authorization: Bearer <token>" -d "test" https://ntfy.example/<topic>` — confirming the 403 originates from Cloudflare's JS challenge intercept (Bot Fight Mode / "Under Attack" mode), not from Bambuddy or ntfy. Cloudflare returns its interstitial HTML to any non-browser client at the edge, so the request never reaches the user's ntfy backend at all. Bambuddy can't solve a JS challenge from a backend — the only real fix is on the user's Cloudflare side (a security-skip rule for the hostname/path, disabling Bot Fight Mode for that hostname, or fronting the server with Cloudflare Access using a service token). Two improvements shipped to make this footgun self-diagnosable for the next user who hits it. **(1) Honest User-Agent on the notification HTTP client.** `backend/app/services/notification_service.py` was the one outbound httpx client in the codebase that didn't set the project-standard `Bambuddy/1.0 (+https://github.com/maziggy/bambuddy)` UA — it leaked `python-httpx/<version>` instead. Brings it in line with `bambu_cloud` / `makerworld` / `firmware_check` / `inventory` (all unified during the May 2026 compliance pass) and makes Bambuddy a more obvious citizen to upstream WAFs and proxy operators. Won't defeat Cloudflare's JS challenge (the user's curl test proves CF blocks regardless of UA) but it's a consistency / hygiene fix with no regression risk. **(2) Cloudflare-challenge detection on the ntfy error path.** New `_looks_like_cloudflare_challenge(response)` helper checks the response shape (`Server: cloudflare` or `cf-mitigated` header, or `<!DOCTYPE html>...Just a moment...` body). When a 403/non-success response matches, the error returned to the UI now reads: *"HTTP 403 — ntfy server is behind a Cloudflare challenge. Bambuddy was served the JS challenge page instead of reaching ntfy. Cloudflare cannot be solved from a backend; add a Cloudflare security-skip rule for this hostname, disable Bot Fight Mode, or front the server with Cloudflare Access using a service token. (#1534)"* — actionable, points at the real fix, removes the raw HTML dump. A regular 403 (e.g. ntfy auth failure with a plain `forbidden: invalid auth token` body) still surfaces the original body so genuine auth errors stay debuggable; the interceptor only fires on the Cloudflare shape. **Tests**: 3 new in `TestNtfyOutbound` in `test_notification_service.py` — (a) the lazy-constructed httpx client carries the honest UA header on first use; (b) a 403 with `Server: cloudflare` + `Just a moment...` body produces the actionable error and does not echo `<!DOCTYPE` to the user; (c) a 403 with a plain text auth-failure body keeps the original `HTTP 403: forbidden: invalid auth token` so we don't hide real errors. 110/110 in the notification suites green under `pytest -n 30`. Backend ruff clean.
- **Source-3MF upload on "fallback" archives no longer crashes with HTTP 500 (and stops orphaning files outside the data volume) (#1531, reported by @d3nn3s08)** — When MQTT reports a print start but Bambuddy never saw the source 3MF (cloud-initiated prints, Bambu Handy, prints already on the printer's SD card when Bambuddy connected), `main.py:2596` creates a "fallback" `PrintArchive` row with `file_path=""`. The two `Archives → Source 3MF Upload` routes computed the destination directory as `(settings.base_dir / archive.file_path).parent / "source"` — which on a fallback row collapsed to `Path('/app/data') / '' = Path('/app/data')`, whose `.parent` is `Path('/app')`, sending the upload to `/app/source/<filename>.3mf`. The file was physically written there (a path outside the user's mounted data volume — orphaned on container restart) and only the *final* `source_path.relative_to(settings.base_dir)` raised, so every retry left another orphan. Affected reporter is on a QNAP Docker host with the standard `/app/data` mount; both maintainer and triage initially diagnosed it as a Docker volume misconfiguration, but the traceback shows the bug is purely on Bambuddy's side — the user's setup was correct. **Fix**: new private helper `_resolve_source_3mf_path(archive, source_filename)` in `backend/app/api/routes/archives.py` centralises the destination computation. Normal archives still nest the source under `<archive_file_dir>/source/<filename>`. Fallback archives (empty `file_path`) now land under `<base_dir>/archive/no_source/<archive_id>/<filename>` instead — a deterministic, addressable location that stays inside the data volume, and the existing read sites (`download_source_3mf`, `download_source_3mf_by_filename`, the slicer-token routes, `delete_source_3mf`) all continue to work because they read back via `settings.base_dir / archive.source_3mf_path`. The helper also defensively asserts the resolved directory is inside `base_dir.resolve()` regardless of where it came from, so a row corrupted by an old import or a manual SQL edit fails with a clear 500 message ("Archive N resolves to a path outside the data directory; cannot attach source.") instead of silently writing outside the volume. Both upload sites (`upload_source_3mf` and `upload_source_3mf_by_name`, the slicer-post-processing endpoint) now route through the helper, so neither can independently drift back into the bug. **Tests**: 2 new in `TestUploadSourceThreeMF` in `backend/tests/integration/test_archives_api.py` — (a) `test_fallback_archive_source_upload_lands_under_base_dir` creates an archive with `file_path=""`, uploads a minimal valid 3MF, asserts 200 status, that the returned `source_3mf_path` is relative (not `/app/source/...`), that the file physically exists under the patched `base_dir`, and that the path is the deterministic fallback location keyed off `archive.id`; (b) `test_normal_archive_source_upload_unchanged` is the same flow against an archive with a populated `file_path`, asserting the existing `archives/test/source/<filename>.3mf` layout is preserved (regression guard against the helper accidentally changing the normal path). 57/57 in `test_archives_api.py` green under `pytest -n 30`. Backend ruff clean. **Note**: existing orphan files at `/app/source/<filename>.3mf` from prior failed retries inside an affected user's container can be safely deleted; they were never indexed in the DB, never reachable from the UI, and would have vanished on the next container restart anyway.
- **SpoolBuddy weight sync no longer silently lands on a stale local row when Spoolman is enabled (#1530, reported by @chesterakl)** — Reporter (Spoolman mode, H2C, internal "manually add then NFC-link" flow) saw the SpoolBuddy "Sync Weight" button flip to "Synced!" but the Spoolman-backed inventory listing never updated. Cause: `POST /spoolbuddy/scale/update-spool-weight` (`backend/app/api/routes/spoolbuddy.py`) ran the lookup local-DB-first and only fell through to Spoolman on local miss — but the upstream `nfc/tag-scanned` route is exclusive (always-Spoolman when `spoolman_enabled=true`, after the #1119 / nfc-routing fix). When the user's local DB still held a stale `Spool` row that happened to share a numeric id with the Spoolman spool the NFC tag mapped to, the sync endpoint absorbed the update into the stale local row, returned 200 with the local `weight_used`, and the actual Spoolman spool went untouched. The support log confirms it: 17 sync attempts across two days, every line logged `SpoolBuddy updated spool 2 weight: …g on scale, …g used` (the local-branch log format) and the `SpoolBuddy updated Spoolman spool …` line (which only fires in the Spoolman branch) never appeared. The bug couldn't be reproduced on developer setups because they don't carry a leftover local row with a colliding id. **Fix**: `update_spool_weight` now routes exactly like `nfc_tag_scanned` — `_get_spoolman_client_or_none(db)` first, and that result picks the branch exclusively. Spoolman mode goes straight to Spoolman with no local-DB read; local mode does the local update and returns 404 (not "fallback to Spoolman") on a local miss. Matches [[feedback_inventory_modes_parity]] — the two inventory modes must behave identically from the user's perspective, including which row gets written. The docstring now spells out the routing contract so the next reader doesn't reintroduce the local-first read. **Tests**: 1 new regression test in `TestUpdateSpoolWeightSpoolman.test_stale_local_row_does_not_shadow_spoolman` — creates a local `Spool` with the same numeric id as a mocked Spoolman spool, posts the sync, asserts (a) Spoolman's `update_spool` was called with the correct remaining weight, and (b) the local row's `weight_used` and `last_scale_weight` are unchanged after a `refresh()` against the live DB. The existing 8 tests in that class continue to assert the Spoolman branch math (filament/spool-level tare priority, 404 / 503 mappings, 250g fallback warning). 9/9 green; 126/126 across the spoolbuddy + spoolman-filament-patch integration suites green under `pytest -n 30`. **Cleanup hint for affected users**: anyone in Spoolman mode with leftover local Spool rows from before they switched should delete those rows — they're inert under the new routing, but they were eating sync attempts under the old. Backend ruff clean.
- **Paused prints no longer inflate maintenance hours (#1521, reported by @TempleClause)** — The `track_printer_runtime` background task in `backend/app/main.py` counted both `RUNNING` and `PAUSE` states equally toward `runtime_seconds`, which feeds every hours-based maintenance interval (lubricate rods, clean nozzle, check belts, etc.). Maintenance items measure *mechanical wear*, and pause time involves no motion — so a print paused overnight stretched the maintenance clock forward by ~8 h without any actual wear, triggering "lubricate rods" warnings earlier than warranted. Reporter found this by code review (no support bundle), flagged it cleanly with the exact line in `main.py` and three ranked solution options. **Fix**: option 1 (exclude PAUSE entirely) — `state.state in ("RUNNING", "PAUSE")` → `state.state == "RUNNING"`. PAUSE now follows the same path as FINISH / IDLE / PREPARE: the elapsed-time accumulator skips it, and `last_runtime_update` is cleared so a later RUNNING transition starts fresh and doesn't back-bill the pause. No setting / toggle (reporter's option 3 was deliberately the throwaway — this is a wear-tracking semantic, not a user preference); no cap (option 2) — wear during pause is zero, not "reduced". Docstring and field-comment trail updated across `main.py`, `models/printer.py:23`, and the two `api/routes/maintenance.py` route docstrings that all previously described the field as covering "RUNNING and PAUSE states". **Out of scope**: retroactive backfill of existing `runtime_seconds` values — already-accumulated pause time cannot be split out, only future accumulation is fixed. Users with hours-based maintenance intervals already set will see slower accumulation going forward (the correct outcome), so a previously-near-due item may take longer to ring than under the old behaviour. **Tests**: 3 new in `test_runtime_tracking_pause.py` pinning the new contract — PAUSE does NOT accumulate and clears `last_runtime_update`; RUNNING still accumulates and updates the timestamp; a non-active state (FINISH) clears `last_runtime_update` to prevent back-billing the idle time when the printer next goes RUNNING. The tests drive the actual `track_printer_runtime()` coroutine through a single iteration via patched `asyncio.sleep` against an in-memory SQLite DB, so they catch any regression in the predicate at the call site (not just an extracted helper). Backend ruff clean; targeted 24-test rod/runtime subset all green.
- **Quick Stats: user-cancelled prints now have their own bucket and no longer drag down the Success Rate gauge (#1390 follow-up, reported by @IndividualGhost1905)** — Reporter saw `Total prints: 20 / Success: 18 / Failed: 1` and asked where the 20th print went; the breakdown only showed Successful + Failed, so a cancelled run silently inflated the total without appearing anywhere. The earlier #1390 round had committed a test that *locked in* the bug — `it('uses total_prints as denominator so cancelled/stopped events count')` asserted the gauge should divide by `total_prints`, which lumped user/queue-cancelled jobs in with quality outcomes and conflated user intent with printer performance. **Cause**: `PrintLogEntry.status` has six values in production (`completed`, `failed`, `aborted`, `stopped`, `cancelled`, `skipped`) but the Quick Stats endpoint in `api/routes/archives.py` only counted two — `completed` → Successful, `status == "failed"` → Failed — and used a raw `count(*)` for Total Prints, so the other four statuses ended up in Total without surfacing in any breakdown row. `aborted` was particularly silent: classified as a failure elsewhere in the codebase (`failure_analysis.py`, `main.py:430,1729`) but not counted toward `failed_prints` in stats. **Fix**: three-bucket classification across the whole stats surface, matching how the rest of the codebase already groups these statuses. Quick Stats now returns `successful_prints` (completed), `failed_prints` (failed + aborted — printer-detected quality failures), and a new `cancelled_prints` (stopped + cancelled + skipped — user/queue interruptions). The SuccessRateWidget gauge divides by `successful + failed` only, so cancelling a roll because you changed your mind doesn't ding the printer's success rate — a Cancelled row in the breakdown surfaces the count so it doesn't silently vanish from Total Prints. The Failure Analysis service applies the same denominator change (`failure_rate = failed / (successful + failed)`) to both the headline rate and the per-week trend, so a week with no failures but several cancellations no longer reads as a misleading 0/N. **Schema change is additive-safe**: `ArchiveStats.cancelled_prints` defaults to `0` so any historical fixture validating against the model still parses; the frontend type also defaults the display to `0` when the field is missing. **i18n**: new `stats.cancelled` key with real translations across all 9 locales (de/es/fr/it/ja/pt-BR/zh-CN/zh-TW) per [[feedback_translate_dont_fallback]]; parity script clean at 4994 leaves per locale. **Tests**: existing `it('uses total_prints as denominator …')` test inverted to assert the new behaviour (40 completed / 20 failed / 35 cancelled → gauge shows 67%, Cancelled row reads 35), `cancelled_prints: 0` added to the shared mock so the unchanged-display assertion (140/150 → 93%) still holds since `140 / (140 + 10) = 93.33%` rounds identically. 33 StatsPage tests + 6 backend stats/failure tests green; frontend build + backend ruff clean. **Follow-up (cosmetic):** the new Cancelled row's Ban icon rendered in `text-bambu-gray` while the Successful and Failed icons used semantic `text-status-ok` / `text-status-error` tokens — reporter (@IndividualGhost1905) noted the asymmetry and asked for an orange to match what Archives + notification badges use for cancelled. Switched the Cancelled row to `text-status-warning` (amber-500, same token family as the other two rows), so all three icons are now semantic-token-driven and the new row matches the colour the user already associates with cancelled status elsewhere in the UI.
- **VP queue mode no longer blocks BambuStudio Send while the target printer is mid-print (#1558, reported by @phieb)** — Reporter set up a non-proxy queue-mode VP with a target printer bound, started a print on the real printer, then tried Send to the VP from BambuStudio — slicer refused with the "busy" pre-flight error even though Bambuddy's whole job is to look idle so jobs queue any time. Cause traced by reporter: `SimpleMQTTServer._send_status_report` forces `gcode_state=IDLE` and storage indicators on top of the cached-as-base mirror — good — but the cached branch overrode only a handful of fields, and the live print-progress fields from the mirrored real `push_status` (mc_print_stage, mc_percent, mc_remaining_time, stg, stg_cur, layer_num, total_layer_num, print_error) passed through unchanged. The VP emitted a contradictory report (gcode_state=IDLE but mc_percent>0, stg_cur>0, ...) and BambuStudio's Send pre-flight read it as busy. Without a bound target the synthetic-stub branch reported all of these idle and Send worked — isolating the leak to the cached branch. **Fix**: in the cached branch, also override those 8 activity fields to the idle values the synthetic-stub branch uses (`mc_print_stage=""`, `mc_percent=0`, `mc_remaining_time=0`, `stg=[]`, `stg_cur=0`, `layer_num=0`, `total_layer_num=0`, `print_error=0`). Same shape as the #1228 storage-indicator overlay — internally consistent with the forced IDLE state while AMS / version / temperatures keep mirroring. **Behavioural caveat for users**: a slicer connected to the VP just for monitoring no longer sees the real printer's mid-print progress through the VP (since the cached push now reports idle). The real printer's IP / UI remains the source of truth for progress. Per the issue intent, this trade-off is explicit. **Tests**: new `test_live_progress_fields_zeroed_in_cached_branch` in `test_vp_mqtt_bridge.py::TestStatusReportCachedAsBase`.
- **VP `_pending_files` / temp-file leak on every error path across the three file handlers** — Pre-fix: `_archive_file`, `_queue_file`, and `_add_to_print_queue` only popped `_pending_files` and unlinked the temp file on the success branch. When archival failed (DB outage, ArchiveService raise, queue insert error), the entry stayed in the dict — and since the FTP layer keys its "same-name STOR already in flight" guard on filename, the slicer's next retry was spuriously rejected; the upload_dir also accumulated orphan temp files indefinitely. Each handler now uses a `try / finally` that pops the marker and unlinks the temp file regardless of whether the body succeeded. 3 unit tests in `test_virtual_printer.py::TestVirtualPrinterInstance` (one per handler) inject a failure mid-flight and assert both invariants.
- **VP queue position now picks `MAX(position)+1` instead of hardcoded `1`** — Pre-fix: VP-uploaded queue items always landed at `position=1`. With non-empty queues this created duplicate position=1 rows; the scheduler orders by `(printer_id, position)` so ties resolved in undefined DB-internal order, and repeat VP uploads accumulated multiple position=1 rows — making the queue's visible ordering non-deterministic and dispatching out of the user's intended sequence. Now the VP path runs the same `SELECT MAX(position) FROM print_queue_items WHERE printer_id=<target or NULL> AND status='pending'` query the canonical `POST /print-queue/` route uses and inserts at `max_pos + 1`. Defensive `try/except` around the `.scalar()` call so a mocked DB in tests can't cause a `TypeError` from MagicMock arithmetic. 1 unit test pins the MAX+1 behaviour (with `MAX=7` the inserted item lands at `position=8`).
- **VP DELETE route cleans orphan `PendingUpload` rows + on-disk upload_dir** — Pre-fix: `DELETE /virtual-printers/{vp_id}` stopped the running instance and removed the row, but the `base_dir/uploads/<vp_id>/` directory and any `PendingUpload` rows that referenced it lingered. The user only learned the rows were orphaned by trying to archive one and getting a "file missing" → flip-to-discarded auto-handler — not exactly a clear signal. Now the DELETE handler queries `PendingUpload` rows whose `file_path` starts with the VP's upload_dir prefix, marks them `status='discarded'`, then `shutil.rmtree`s the directory after the DB commit succeeds (so a crash between commit and rmtree leaves orphan files at worst, not orphan rows pointing at a missing tree). 2 unit tests in `test_vp_delete_cleanup.py` cover the cleanup-with-orphans + clean-no-op paths.
- **VP `MQTTBridge._refresh_loop` crash no longer leaks the raw_message_handler** — Pre-fix: if any exception escaped `_resolve_client` (the IP-encoding branch was the most likely culprit), `_refresh_loop` caught it with `logger.exception` and returned. The task completed `status=done` — not cancelled, not raising — so `stop()` never ran and `_unbind_client` never fired. `self._on_printer_raw` stayed registered on the live `BambuMQTTClient` and kept reading / writing `self._latest_print_state` on every real-printer message even though the VP bridge was functionally dead, creating a behaviour leak that persisted across VP restart. Now the crash exit explicitly calls `_unbind_client()` so the orphaned handler is detached even when the loop dies abnormally.
- **VP `sync_from_db` serialised by `asyncio.Lock` (concurrent-PUT race)** — Two simultaneous `PUT /virtual-printers/{id}` calls (e.g. browser racing the auto-save trigger) could race the inner start/stop sequence and leave duplicate sub-services bound to the same port — split-brain state that only resolved on the next Bambuddy restart. `VirtualPrinterManager.__init__` now holds a `_sync_lock`; `sync_from_db` wraps the body in `async with self._sync_lock`. Single VP updates still complete in well under a second, so the serialisation isn't visibly slower.
- **VP `_slicer_print_options` cache bounded at 128 entries with FIFO eviction** — Pre-fix: the dict that stashes the slicer's `project_file` options (so `_add_to_print_queue` can inherit timelapse / bed_leveling / flow_cali / etc.) had no bound. If the slicer sent `project_file` for a filename whose FTP upload was rejected / cancelled / non-3MF, the stash was orphaned and the dict grew one entry per such event for the VP's entire uptime. The new bound triggers eviction of the oldest entry once 128 entries accumulate.
- **VP `MQTTBridge` sticky-key carry-forward now uses `copy.deepcopy`** — Pre-fix: a sticky key carried over from the previous cache was assigned by reference, sharing nested dicts/lists between the old and new state. No current code path mutates a carried-forward sticky key in place, so this was latent — but a future merge that did would corrupt both copies. Defensive `copy.deepcopy` on the carry-forward removes the foot-gun without changing observable behaviour.
- **VP `MQTTBridge._refresh_loop` and `SimpleMQTTServer._send_status_report` cached-path use deepcopy** — `_send_status_report` cached branch was using `dict(cached)` — a shallow copy. Today's mutations are top-level only, but a future override that wrote into a nested dict (e.g. `online`, `upgrade_state`, `ipcam`) would corrupt the bridge cache and be read by every subsequent subscriber until the next real-printer push landed. Switching to `copy.deepcopy` removes the foot-gun.
- **VP `SlicerProxyManager` lifecycle hardening** — Multiple proxy-mode fixes shipped together: (a) `_ftp_data_proxies` and `_actual_ftp_port` are pre-initialised in `__init__` instead of `start()`, so `stop()` called before `start()` finishes (rapid mode-switch race) no longer raises `AttributeError` and leaves sockets stranded; (b) `_actual_ftp_port` now tracks the iptables-redirect target when the deployment uses `REDIRECT --to-port` to let non-root containers serve on 990, and `get_status()` returns it — diagnostic was previously probing the class constant 990 and false-failing on every working redirect deployment; (c) the FTP-data-proxy `auto_close` tasks (101 of them in `FTPTLSProxy`) are now tracked on `_auto_close_tasks` and cancelled in `stop()` — previously they lingered ~60 s holding server references and could fail the next start with "address already in use"; (d) probe servers `await server.wait_closed()` on stop instead of just `srv.close()` — same rapid-restart race.
- **VP diagnostic now probes both bind ports 3000 and 3002** — Pre-fix: non-proxy bind diagnostic only probed 3002. The bind server in server mode actually listens on both (plain on 3000, TLS on 3002 per `bind_server.py:BIND_PORTS`); a VP whose plain listener failed to start but TLS listener succeeded would pass the diagnostic while being half-broken. Now `port_bind` reports `pass` only when both probes succeed. New `PORT_BIND_PLAIN = 3000` constant.
- **VP FTP `stop()` awaits cancelled sessions instead of `sleep(0.1)`** — A session mid-write, mid-TLS-handshake, or holding a 60 s data-read could easily outlive the 100 ms sleep, and the server's `close()` would run while underlying sockets were still in use. Now `stop()` cancels each session task and `asyncio.gather`s them with `return_exceptions=True`. Stop is a few ms slower in the typical case; worst-case bounded by whatever asyncio takes to propagate cancellation.
- **VP child sub-services (FTP / MQTT / Bind / SSDP) expose `ready` event for accurate `is_running`** — See Added section for full description.
- **VP per-VP TLS certificate auto-regenerates when the shared CA is rotated** — Pre-fix: `ensure_certificates` only checked that the per-VP cert file existed. When the shared CA was regenerated (its expiry within 30 days), per-VP certs on disk were still signed by the OLD CA — slicers that imported the NEW CA failed handshake. The check is now a real signature verification: `ensure_certificates` loads the on-disk per-VP cert and the on-disk CA, and verifies the cert's signature against the CA's public key via `cryptography.hazmat.primitives.asymmetric.padding.PKCS1v15`. On `InvalidSignature` (rotation detected), the per-VP cert is regenerated under the current CA. **The unit-test driven a real bug** in an earlier version of this fix: comparing Subject DN was insufficient because Bambuddy's auto-generated CAs share the same Subject Name ("Virtual Printer CA"), so DN-match returned True even after rotation. 3 tests in `test_vp_certificate_rotation.py` (reuse-when-issuer-matches, regen-when-rotated, no-CA-returns-False).
- **VP `tailscale.py::get_status` now catches `asyncio.TimeoutError`** — Pre-fix: `_run_tailscale` could re-raise `TimeoutError` after killing a stuck subprocess. The `except OSError` clause in `get_status` didn't catch it, so the exception propagated all the way to the FastAPI route handler and crashed the VP management UI for any user whose host `tailscaled` was lagging. Now the except clause covers both `OSError` and `asyncio.TimeoutError`, returning a `TailscaleStatus(available=False, error=...)` either way.
- **VP `certificate.py` CA save uses correct parent directory** — Pre-fix: `_get_or_create_ca` created `self.cert_dir` (the per-VP subdirectory) before writing the CA, but the CA writes target `self.ca_key_path.parent` (the shared CA dir — potentially a different path). Latent because the manager pre-creates both directories; surfaced by the path-correctness audit.
- **VP `_extract_plate_id` logs failures at debug instead of silent** — Pre-fix: `except Exception: return None` swallowed any failure to parse `Metadata/slice_info.config` without a log. A malformed 3MF then produced a wrong-plate dispatch with no diagnostic trail. The except now logs at debug so support bundles capture the parse error.

## [0.2.4.4] - 2026-05-30

### Security

- **Fail-open authentication bypass on database errors — unauthenticated access to every protected endpoint during a forced DB-exception window ([GHSA-6mf4-q26m-47pv](https://github.com/maziggy/bambuddy/security/advisories/GHSA-6mf4-q26m-47pv), CVSS 9.8 critical, reported by @wondercrash)** — Two functions in the auth path caught every exception and returned the "allow" answer instead of denying the request: `is_auth_enabled` in `backend/app/core/auth.py:473` (returned `False`, treating "DB query raised" as "auth is disabled") and the global `auth_middleware` in `backend/app/main.py:5590` (caught everything and called `await call_next(request)` with a comment that explicitly said "fail open for DB issues"). An attacker who could trigger any exception during the auth probe — the reporter's documented PoC floods `/api/v1/auth/login` until the process exhausts its file-descriptor budget and the next SQLite `connect()` raises — could then hit any protected endpoint during that fail-open window with no token. CWE-636 (Failing Open) / CWE-755 (Improper Handling of Exceptional Conditions). Affected versions `>= 0.1.6`. **Impact during the window**: create a persistent admin account or API key, download the database backup (hashed passwords + encryption keys + printer access codes + MFA secrets), read/modify settings, control printers. **Fix**: `is_auth_enabled` now only returns `False` for the legitimate "settings row absent" case (`scalar_one_or_none()` returns `None` → system was never configured for auth); any actual exception propagates so the caller can deny the request. `auth_middleware` returns `503 Service Unavailable` on any probe failure instead of letting the request through. The principle applied throughout: a failure to verify the auth state means the request is denied, not granted. **Regression tests** in `backend/tests/unit/test_auth_fail_closed.py` pin the four contracts: `is_auth_enabled` propagates DB exceptions, returns `False` for the no-row case, returns `True` for `value=true`, returns `False` for `value=false`. An existing security test (`test_security.py::test_status_returns_500_on_db_error`) was renamed to `test_status_returns_503_on_db_error` and updated to accept either 500 or 503 (both fail-closed) while explicitly verifying the SQLAlchemy detail string doesn't leak in the response body. **Codebase audit**: grepped every `except Exception` in `backend/app/core/auth.py` and `backend/app/core/permissions.py` for the same shape; `_validate_api_key` catches but returns `None` which leads to a 401 downstream (fail-closed), `is_advanced_auth_enabled` in `backend/app/api/routes/auth.py` already propagates correctly, `permissions.py` has no catch-alls — no other auth-decision predicate carries this anti-pattern.

## [0.2.4.3] - 2026-05-24

### Added
- **SliceModal: "Slice all plates" toggle for multi-plate sources** — Re-slicing a multi-plate 3MF (e.g. a "parted statue" project where each plate carries a different body part) required opening the slice modal once per plate, picking the printer / process / filaments every time, and ending up with one archive per plate. The footer now has a "Slice all N plates" checkbox for multi-plate sources: tick it and the "Slice" button flips to "Slice all N plates", submitting `plate=0` instead of the picked plate index. The backend forwards this as the BS CLI's `--slice 0` "all plates" sentinel, which produces a **single output 3MF whose `Metadata/plate_N.gcode` entries cover every plate** — one slice call, one archive, every plate inside. **Filament dropdowns also adapt**: with the toggle on, they show the *union* of every plate's slot usage (a slot a plate-2 part paints with but plate 1 doesn't was previously invisible — the user could only pick filaments for the actively-viewed plate). The union is computed client-side from the existing `platesQuery.data.plates[*].filaments` payload, so no extra round-trip. The backend `SliceRequest.plate` field's range relaxed from `ge=1` to `ge=0` to admit the sentinel (the schema's docstring spells out the three semantics: `None` → default plate 1, `0` → all plates, `>= 1` → that plate). The substitute-unused-filaments pass becomes a no-op for `plate=0` (no concept of "unused" when every plate counts), which is correct — in slice-all mode every slot the project defines IS used by something. The toggle is hidden on single-plate / STL sources where it'd be meaningless. **Cross-class slice-all is handled by a per-plate loop**: BS CLI's `--arrange` is project-wide, so `--slice 0 --arrange 1` on a cross-class source consolidates every plate's objects onto a single target bed — either packing everything onto one plate or rejecting with "Some objects are located over the boundary of the heated bed" when nothing fits. When Bambuddy detects `plate=0` combined with a class crossing, it falls back to slicing each plate independently (`plate=N, arrange=true`), then merges the N single-plate 3MF outputs into one multi-plate 3MF in `merge_plate_3mfs` — overlays each plate's `Metadata/plate_N.{gcode,gcode.md5,json,png,_small.png,no_light_N.png,top_N.png,pick_N.png}` onto the first plate's base 3MF and re-assembles `Metadata/slice_info.config` to list every plate's slice block. The resulting archive's totals are the sum of each plate's print time + filament usage. New `count_plates_in_3mf` parses `model_settings.config` for `<metadata key="plater_id" .../>` entries to know how many plate calls to make. Cost: N × per-plate slice time; for a 5-plate Mewtwo on H2D that's ~70s wall clock vs the single-call same-class path. **Progress toast shows loop position**: each per-plate sub-slice forwards the original `progress_request_id` + callback so the toast keeps showing the sidecar's stage messages, with the snapshot augmented with `multi_plate_index` / `multi_plate_count` — the toast renders "Plate 2 of 5 • Mewtwo.gcode.3mf — Generating G-code (47%) — 23s" instead of just elapsed time. New `slice.runningWithProgressMultiPlate` i18n key translated across all 9 locales. **Per-plate cover images preserved**: BS CLI with `--arrange` regenerates plate gcodes but rarely writes a fresh `Metadata/plate_N.png`, so the merged 3MF would have only plate 1's cover. The merger now takes the source 3MF as an optional fallback and lifts the source's per-plate render (`plate_N.png` / `plate_N_small.png`) into the merged file when the sliced output is missing it — same fallback approach as the archive-card thumbnail fix. **Final test coverage**: 26 unit tests in `test_slicer_3mf_convert.py` (extract canonical model, count plates, merge with overlay / passthrough / source-thumbnail fallback / sorted plates, substitute unused-slot filaments) + 3 in `test_slicer_api.py` (arrange flag wire format on preset and bundle paths) + 9 in `test_library_slice_api.py` (guard no-op semantics, re-sliced thumbnail / bed_type lifts, **a new cross-class slice-all integration test that mocks the sidecar, asserts the backend loops per-plate with `arrange=true`, and verifies the merged archive contains `plate_1..plate_N.gcode`**) + 2 in `test_archive_service.py` (Auxiliaries thumbnail fallback) + 4 in `SliceModal.test.tsx` (slice-all toggle sends `plate=0`, toggle hidden for single-plate, plus 2 pre-existing tests for the picked-plate behaviour) + 2 new in `SliceJobTrackerContext.test.tsx` (toast prefixes "Plate X of Y" when the snapshot carries the loop fields; no prefix on plain single-plate slices). 659 backend / 42 frontend tests green; backend ruff + frontend build + i18n parity all clean. 2 new tests in `SliceModal.test.tsx` (toggle sends `plate=0` to the backend; toggle hidden for single-plate sources) plus updates to the existing plate-picker test for the new label scheme. All 9 locales translated. Frontend build clean, i18n parity green at 4983 keys × 9 locales.
- **System Health — log scanner that surfaces self-fixable issues before they become support tickets** — Complements the active Connection Diagnostic with a passive check: it scans Bambuddy's recent app log against a curated catalog of known failure signatures and reports what it finds. The catalog (`backend/app/services/log_health.py`) is a deliberate allowlist — only known-bad, actionable patterns match, so a healthy install reports nothing and noisy benign churn (the occasional MQTT reconnect after a Wi-Fi blip) is gated behind a per-signature `min_count` threshold. Six seed signatures cover the recurring "layer 8" causes from the closed-issue triage: rejected access code, FTPS :990 timeout, FTPS TLS handshake failure, flapping MQTT connection, unreachable camera (RTSPS :322), and SQLite `database is locked` contention. Each finding is deduped (`occurred N×, last seen …`), classified as *you can fix this* / *environment* / *please report this*, and carries a deep-link to the troubleshooting wiki; sample log lines are sanitized (IPs, serials, access codes redacted) before they leave the process. Exposed via `GET /system/health` and surfaced on two surfaces that share one `SystemHealthPanel` component: a System Health section on the System page (on-demand re-scan), and inline in the bug reporter when the form opens — so a setup mistake gets self-resolved instead of becoming a GitHub issue. The Add-Printer and Edit-Printer dialogs also gained a setup-time pre-flight: saving now runs the connection diagnostic and, if a check fails, warns with a "save anyway" escape hatch instead of silently saving a printer that will immediately show offline. Log-reading and redaction primitives were extracted from `routes/support.py` into a shared `backend/app/services/log_reader.py` (behaviour-preserving). 13 backend tests (`test_log_health.py`, `test_system_api.py`) and 8 frontend tests (`SystemHealthPanel`, `BugReportBubble`, `AddPrinterPreflight`, `EditPrinterPreflight`); all strings translated across the 9 locales. Backend ruff clean, full unit suite green, frontend build clean, i18n parity green.
- **Event-loop stall watchdog — makes a frozen backend self-diagnose (#1486 groundwork)** — Several "container hangs after adding a printer" reports share a signature that leaves nothing to act on: the HTTP server goes silent, `/health` hangs, the process may stop responding to SIGTERM — and the logs just stop mid-stream with no traceback, because a frozen asyncio event loop cannot log anything. New `backend/app/services/loop_watchdog.py` closes that blind spot: an async heartbeat re-arms `faulthandler.dump_traceback_later()` every 10s, always 30s ahead. While the loop ticks, the timer is cancelled and re-armed before it can fire; if the loop stalls, the heartbeat can't re-arm and faulthandler's dedicated C-level timer thread — which runs independently of the frozen loop — dumps **every thread's stack to stderr**. The blocked frame then appears in `docker compose logs`, turning an un-diagnosable freeze into a one-command capture. Started in the app lifespan after migrations, stopped cleanly on shutdown; 30s threshold is well above any legitimate on-loop operation, so a trip always means a real bug. 5 unit tests in `test_loop_watchdog.py` (arms the timer, idempotent start, stop disarms + cancels, heartbeat interval below the threshold, survives a re-arm error). Backend ruff clean; full app lifespan verified via the integration suite.
- **Slicer: process & filament profiles filtered by the selected printer (#1325, requested by @IndividualGhost1905)** — In the server-side Slice dialog, picking a printer profile now filters the Process and Filament dropdowns to presets compatible with that printer; presets that resolve to a different Bambu model drop into a trailing "Other printers" group instead of cluttering the main list. Matching uses the slicer's own `compatible_printers` list for imported (local) presets, and falls back to the `@BBL <model>` name suffix for cloud and standard presets, so all three tiers are covered. Compatibility-unknown presets (custom or untagged) are never hidden. Defaults follow suit — the pre-picked process and per-slot filament now prefer a printer-compatible preset, and switching the printer re-picks any selection left incompatible. The printer and process dropdowns also default to the preset names embedded in the source 3MF's `project_settings.config` when those presets are available, instead of always taking the first listed preset. New `frontend/src/utils/slicerPrinterMatch.ts` (11 unit tests) and `extract_embedded_presets_from_3mf` (5 unit tests); `UnifiedPreset` now carries `compatible_printers`, exposed for the local tier (`backend/app/api/routes/slicer_presets.py`); the plates endpoints return `embedded_printer` / `embedded_process`. Parity green, build clean.
- **Spanish (es) translation (#1243, requested by @MiguelAngelLV)** — Bambuddy now ships a full European Spanish locale. New `frontend/src/i18n/locales/es.ts` translates all 4899 keys with placeholders, plural forms, and inline markup preserved; registered in `frontend/src/i18n/index.ts` and selectable as "Español" in the language picker. The parity checker auto-discovers the file — `frontend/scripts/check-i18n-parity.mjs` gained an `ES_COGNATES` allow-list for genuine Spanish cognates and brand/format tokens. Brings the supported-language count to 9 (en / de / es / fr / it / ja / pt-BR / zh-CN / zh-TW). Parity green, frontend build clean.
- **Currency: Belize Dollars (BZD) added to the Settings → Cost currency dropdown (#1454, requested by @PLGuerraDesigns)** — Reporter accurately tracks 3D-printing filament costs in his local currency and BZD wasn't selectable, forcing a manual 2:1 mental conversion from USD. Added `BZD: 'BZ$'` to `frontend/src/utils/currency.ts` next to MXN (Americas dollar-prefix grouping); `getCurrencySymbol('BZD')` returns `'BZ$'` and the SUPPORTED_CURRENCIES list now has 30 entries. Unit test added in `frontend/src/__tests__/utils/currency.test.ts` covering the symbol lookup and presence in SUPPORTED_CURRENCIES; entry-count assertion bumped to 30 so any future additions/removals are caught immediately. 14 currency tests green; frontend build clean.
- **Connection Diagnostic — self-service triage for "printer won't connect / won't print"** — A triage review of recently-closed issues found roughly a third were user-side setup errors (printer not in LAN developer mode, blocked ports, Docker bridge networking, wrong access code, printer on a different subnet), each costing a multi-round-trip "enable debug logging → build a support bundle → upload it" exchange. A new diagnostic (`backend/app/services/printer_diagnostic.py`) runs those checks automatically: TCP reachability of MQTT 8883 / FTPS 990 / RTSPS 322, LAN developer mode, Docker network mode, printer/host subnet match, and MQTT credential class — each returning a pass / fail / warn / skip status with a localized plain-language fix. Exposed via `GET /printers/{id}/diagnostic` (saved printer) and `POST /printers/diagnostic` (pre-save Add-Printer flow), and surfaced as a one-click "Run diagnostic" from the printer card actions menu (plus a quick button on the card when a printer is offline), the Add-Printer dialog, and a new Connection Diagnostic section on the System page. The in-app bug reporter scans configured printers when the report form opens and always shows the result — a healthy confirmation when nothing's wrong, or the detected problem and its fix inline — so setup mistakes get self-resolved instead of becoming GitHub issues. The GitHub `config.yml` troubleshooting link was repointed from the wiki source repo to the rendered troubleshooting page. Backend service unit tests (15) and frontend modal tests (3) added; all diagnostic strings translated across the 8 locales. Backend ruff clean, frontend build clean, i18n parity green.

### Changed
- **Settings → SpoolBuddy: CPU load tile added to the device card** — The SpoolBuddy daemon's heartbeat already reports `load_avg` (1/5/15 min) and `cpu_count` via `system_stats` (see `spoolbuddy/daemon/system_stats.py`), but the device card on the Bambuddy SpoolBuddy settings only rendered CPU temp / memory / disk / system uptime. Adds a fifth tile next to CPU temp showing the 1-minute load average alongside core count and a percent-of-cores readout — for a 4-core Pi: `1.20 / 4 (30%)`. Falls back to a bare load number when `cpu_count` isn't reported, and the tile is hidden entirely when the daemon doesn't emit `load_avg` (older builds). Useful for spotting the "I2C/SPI stuck after idle overnight" pattern early — sustained high load before the bus dies points at runaway daemon work rather than a kernel hang. Translated across all 9 locales (de/es/fr/it/ja/pt-BR/zh-CN/zh-TW). Frontend build clean, i18n parity green.
- **Virtual printer: setup diagnostic + one-click slicer-certificate export** — Two recurring virtual-printer support pains, addressed on the Virtual Printers settings page. **(1) Setup check** — a new stethoscope action on each VP card runs `GET /virtual-printers/{id}/diagnostic` and shows a pass/fail/warn/skip checklist: VP enabled, services running, bind interface still exists, access code set, target printer (proxy mode), and — decisively — a live TCP probe of the FTP/MQTT/discovery ports on the bind IP. The manager swallows per-service start errors (`run_with_logging`), so a service object can exist while nothing is actually listening; probing the bind IP from outside is the only reliable signal, and it catches the common "VP doesn't show up in the slicer" bind-IP-conflict and stale-interface cases. New `backend/app/services/virtual_printer/diagnostic.py` + `VPDiagnosticResult` schema + `VirtualPrinterDiagnosticModal.tsx`. **(2) Slicer certificate** — virtual printers present a TLS cert signed by a shared CA the slicer must trust; until now users had to `docker exec` in and `cat bbl_ca.crt` to get it. A new "Slicer certificate" row on the Virtual Printers settings card (alongside the Archive name source toggle) offers Copy and Download (`bambuddy-virtual-printer-ca.crt`) plus the CA's SHA-256 fingerprint, served by `GET /virtual-printers/ca-certificate` — only the public certificate, never the CA private key. The CA is generated on demand so the button works before the first VP is enabled. Copy uses a non-secure-context fallback (Bambuddy is usually on plain-HTTP LAN), extracted into a shared `utils/clipboard.ts`. 9 backend diagnostic/CA unit tests + 4 route integration tests + 6 frontend tests (diagnostic modal, clipboard helpers); all `vpDiagnostic.*` / `virtualPrinter.caCert.*` strings translated across the 9 locales. Backend ruff clean, frontend build clean, i18n parity green.
- **Bug-report panel: connection diagnostic no longer overflows on multi-printer setups** — The "Report a Bug" panel scans every configured printer on open and surfaces connection problems inline so users can self-fix before filing. The first cut rendered a full ~6-row checklist for *each* problem printer stacked vertically; a user with many printers all reporting issues pushed the description box, screenshot uploader and Submit button far below the fold in the `max-w-md` / `max-h-[80vh]` panel. The diagnostic section is now a compact summary — one line ("N of M printers have connection issues") followed by the affected printers as collapsed rows (healthy printers count toward M but render no detail). Each row expands on demand to that printer's full checklist via the shared `Collapsible` widget; when exactly one printer has problems the row is auto-expanded since that's the case where inline detail is wanted with no extra click. The panel now stays a fixed ~3 lines plus one row per affected printer regardless of fleet size, keeping the report form reachable. Healthy-fleet confirmation line is unchanged. New `bugReport.diagnosticSummary` key (with `{{problems}}`/`{{total}}`) replaces the static `diagnosticHeading`; `diagnosticIntro` reworded to be printer-count-neutral and point at the expand affordance — both translated across all 9 locales. 2 new tests in `BugReportBubble.test.tsx` (multiple problems stay collapsed and expand on click; a single problem auto-expands); 11 tests green; frontend build clean; i18n parity holds at 4903 keys × 9 locales.
- **Color Catalog sync now identifies itself as Bambuddy to filamentcolors.xyz** — The FilamentColors.xyz sync client in `inventory.py` created its `httpx.AsyncClient` with no `User-Agent`, so it leaked httpx's default `python-httpx/x.y` string — the only outbound client that did (`bambu_cloud`, `makerworld`, `firmware_check` all send the honest `Bambuddy/1.0 (+https://github.com/maziggy/bambuddy)`). It now sends the same honest UA, consistent with the rest of the codebase. Surfaced while investigating #1456 (a Cloudflare `403` on the sync that turned out to be the reporter's network/IP reputation, not Bambuddy — the UA leak was a separate inconsistency found in passing, and this change does not by itself resolve a Cloudflare IP block).
- **Filament inventory: grouped rows now show group totals (#1368, requested by a user)** — With "Group similar" enabled, the collapsed group row showed the values of a single member (the first spool) — so a group of five 1 kg spools displayed "1000 g" instead of the 5 kg it actually held. The group header now aggregates across all members: the table view's Label, Net, Gross, Used and Remaining columns and the grid card's weight figure show group totals, while identity columns (Material, Brand, Colour) and the Cost/kg rate stay per-spool-correct. Per-spool-only fields with no meaningful total (dates, location, note, tag ID) keep showing the representative member's value; the expanded individual rows are unchanged. New `aggregateGroupSpool` helper in `frontend/src/utils/inventoryGrouping.ts` with 4 unit tests. Frontend-only — all data was already in the spool list. — Previous behaviour disabled the Slice button whenever the source 3MF's bound printer model didn't match the user's picked printer profile, on the theory that the slicer CLI "cannot re-slice a 3MF for a different printer" and would silently fall back to embedded settings to produce a wrong-printer file. Step 0 empirical test on 2026-05-20 disproved that: an 18-color H2D-bound `Trent900.3mf` sliced via the X1C bundle (`POST /slice` with `bundle=cb…X1C, printerName=# Bambu Lab X1 Carbon 0.4 nozzle`) produced 2.3 MB of genuinely X1C-compatible G-code in 1.8 s — `printer_model` overridden to `Bambu Lab X1 Carbon`, `printable_area` to 256×256 (X1C bed, not H2D's 350×320), `printable_height` 250 (vs 325), `bed_exclude_area` populated with X1C's 18×28 corner zone, `nozzle_diameter` single 0.4 (vs H2D's dual `0.4,0.4`), and the full X1C `machine_start_gcode` sequence baked in. The sidecar takes printer / process / first-N filament names from the picked bundle and only inherits embedded values for unused trailing slots — bed size, kinematics, start sequence all come from the target. **Behavioural change**: dropped `!printerMismatch` from the SliceModal `isReady` predicate so the Slice button stays enabled when models differ. The amber banner was first softened to an info message, then removed entirely — re-slicing across printers is now just a normal slice, the picker UI already shows which printer was picked, no second confirmation needed. **Dead-code removal (same drop)**: with no banner, the `source_printer_model` field on the `/library/files/{id}/plates` and `/archives/{id}/plates` responses had zero consumers; the `extract_source_printer_model_from_3mf` helper in `threemf_tools.py` (which opened the 3MF zip and read `Metadata/project_settings.config` on every plate request) had zero callers. Removed both response keys, both backend extractions, both `threemf_tools` imports, the helper itself, its 6 unit tests, the `source_printer_model` field from `frontend/src/types/plates.ts` (PlateMetadata + LibraryFilePlatesResponse), and 2 obsolete SliceModal tests that exercised the now-impossible matched-printer / legacy-archive paths. **i18n discipline cleanup (same drop, per [[feedback_no_followups]] + [[feedback_translate_dont_fallback]])**: every t() callsite in SliceModal.tsx had an inline English `defaultValue:` or positional-second-arg English fallback — 22 sites in total. With 8 locales shipped, those fallbacks are dead weight at best, and an actual i18n-violation when the key is missing because non-English users would silently see English. Audit found 3 keys (`slice.bundle`, `slice.bundleNone`, `slice.bundleAllRequired`) that had **no** corresponding entry in any locale file — they were being served from the inline English fallback exclusively, meaning every non-English user was already seeing those three labels in English. Added all 3 to all 8 locales with real translations, then stripped the English fallback from every t() call in SliceModal.tsx. The `slice.printerMismatch` key was removed from all 8 locales (banner is gone). **Why this matters**: a recurring pain point for users importing MakerWorld project files where the original creator's printer often differs from the user's; previously they had to round-trip through BambuStudio's "convert project" flow to re-export. Now Bambuddy re-slices in-place with no UI friction. **Tests**: the existing SliceModal "shows mismatch warning AND disables Slice" test was rewritten to assert "does not surface any cross-printer banner AND keeps Slice enabled when models differ" (regression guard against the gate being re-added); 2 obsolete tests deleted. 32 SliceModal tests green (was 34, -2 dead tests); 49 threemf_tools tests green (was 55, -6 helper tests); 24 plates-route tests green; frontend build clean; backend ruff clean; i18n parity check passes 4858 keys × 8 locales (net +2 vs pre-fix: +3 bundle keys, -1 printerMismatch).

### Security
- **idna: bump to `>=3.15` to clear CVE-2026-45409 (ReDoS in `idna.encode()` with crafted Unicode payloads, e.g. `"٠" * N` or `"・" * N + "漢"`)** — Transitive dep pulled in by anyio / httpx / requests / yarl; not directly pinned, which is why it lingered at 3.13. Added an explicit `idna>=3.15` floor in `requirements.txt` between Authentication and HTTP-client blocks with a comment explaining why it's pinned (so a future downstream loosening doesn't silently downgrade us). Verified via `pip-audit` clean post-upgrade.
- **starlette: bump floor to `>=1.0.1` to clear PYSEC-2026-161** — `starlette` is a transitive dep pulled in by fastapi, whose range still admits the vulnerable 1.0.0 build, so a fresh `pip install` would silently pick it back up. Added an explicit `starlette>=1.0.1` floor in `requirements.txt` under the urllib3 pin with a why-comment matching the same pattern as the idna/urllib3 entries. Release-notes reviewed for both 1.0.1 (single fix: ignore malformed `Host` header when constructing `request.url`) and 1.1.0 (the resolver actually picked up 1.1.0): three behavioural changes — `FileResponse` falls back to `application/octet-stream` when `mimetypes.guess_type()` can't resolve (Bambuddy has 2 `FileResponse` calls without explicit `media_type`, both serving `index.html` where guess_type still resolves to `text/html`, plus custom-icon serving in `external_links.py:261` where the new fallback is a security improvement), `HTTPEndpoint` only dispatches standard HTTP verbs (`grep` found zero `HTTPEndpoint` usages in Bambuddy — pure FastAPI router code), `StaticFiles.lookup_path` rejects absolute paths in *requests* (the 4 mounts in `main.py:5503-5525` pass absolute *base directories* to the constructor, which is unaffected — only path-traversal-style request paths get rejected). Full backend test suite green (5300/5301; the 1 failure is a pre-existing `-n 30` parallelism flake unrelated to starlette and passes in isolation). Verified clean via `pip-audit` post-upgrade.
- **PyJWT CVE-2025-45768 (PYSEC-2025-183 / GHSA-65pc-fj4g-8rjx): permanently ignored in pip-audit** — Advisory is disputed by the PyJWT maintainers, with the advisory description literally noting *"this is disputed by the Supplier because the key length is chosen by the application that uses the library."* `fix_versions=[]` on the advisory confirms no PyJWT patch exists or will exist. Bambuddy is not affected: `backend/app/core/auth.py:184` auto-generates secrets via `secrets.token_urlsafe(64)` (~86 chars of entropy, far above any sane minimum) and the file-loaded path at `:177` rejects secrets shorter than 32 chars. Added a permanent `--ignore-vuln CVE-2025-45768` to `.github/workflows/security.yml` with an inline comment citing the file:line evidence so a future maintainer reviewing the ignore list sees why it's load-bearing. Also dropped the stale `--ignore-vuln CVE-2026-4539` for Pygments — Pygments has since shipped a patched version and the ignore is no longer load-bearing (verified: `pip-audit --ignore-vuln CVE-2025-45768` alone reports clean).

### Fixed
- **Support bundle + bug-report submission now include the live diagnostic snapshot** — Three diagnostics (Connection Diagnostic per printer, Virtual Printer Setup Diagnostic per enabled VP, Log Health Scanner) have shipped on the System page and inline in the bug-report bubble since 6bc6a1d6 / e222a0ef / ed31b8f4, but the results were only ever shown to the *user* — never persisted into the downloadable support ZIP or the submitted GitHub issue. A report saying "looks broken in Bambuddy" arrived with no actionable signal beyond raw logs. **Fix**: new `services/diagnostic_snapshot.collect_diagnostic_snapshot` runs all three concurrently with an outer per-probe 15 s wall-clock cap (so a hung interface adds at most ~15 s to bundle generation regardless of fleet size — `asyncio.gather`, total ≈ max(per-cap) not sum). Fail-soft per probe: a crash inside one printer's check emits `{"printer_id": N, "error": "..."}` for that entry rather than nuking the whole snapshot — partial result beats a 500. Wired into `_collect_support_info()` so both flows (`POST /support/bundle` and `POST /bug-report/submit` via `support_info=...`) pick up the new `diagnostics` top-level key without their own changes. **Private-data sanitization** — the diagnostic schemas embed raw IPv4 in three places (`PrinterDiagnosticResult.ip_address`, network-mode check's `params.{printer_ip, host_ip}`, VP diagnostic's `params.bind_ip`), and the snapshot adds printer names. None of those should leak. The snapshot now runs a recursive sanitizer on the full result tree before returning: known DB-listed values (printer name, IP, serial, access code) get the same `[PRINTER]/[IP]/[SERIAL]/[ACCESS_CODE]` labels the log sanitizer already applies (via the shared `collect_sensitive_strings`), and an IPv4-regex fallback catches IPs the DB doesn't know about — most importantly the Bambuddy host IP returned by `_get_host_ip()` and any VP `bind_ip` the user picked at setup. Live-DB smoke test confirms zero raw IPv4 instances in the serialized snapshot output. **Progress indicators**: the bubble's "submitting" view and the System page's Download button now render a static four-line checklist showing what's running (printer connectivity → VP setup → log scan → submit/build ZIP) — communicates the longer wait honestly without faking server-side phase progress we can't actually track. **Tests**: 6 new in `test_diagnostic_snapshot.py` — empty-input shape stable, per-printer / per-VP result coverage, fail-soft on a single-probe crash, `timed_out` marker when a probe exceeds the per-probe cap (test patches the cap to 0.05 s), end-to-end IP sanitization across all five field shapes (top-level `ip_address`, `printer_ip`, `host_ip`, `bind_ip`, plus IPs embedded in log-health sample lines) with a final regex sweep over the JSON-serialized result asserting zero raw IPv4 escapes, concurrent execution proof (4 × 0.2 s probes complete in < 0.5 s, would be 0.8 s sequential). Existing 27 BugReportBubble + SystemInfoPage frontend tests still pass; 9-locale i18n parity check clean (4993 leaves per locale, 9 new keys added with real translations everywhere — no English fallback). Backend ruff clean.
- **"Prefer Lowest Remaining Filament" now uses Bambuddy's inventory weight, not just the printer's RFID counter (#1508, reported by @kleinwareio)** — Reporter has an inventory spool cloned to slot 1 and the original (much further used) in slot 4 of the same P1S AMS, with the preference enabled, and the dispatch consistently picked slot 1 (the fresh clone) instead of slot 4 (the original they wanted to finish first). Root cause is the `prefer_lowest` sort in `_match_filaments_to_slots` (`print_scheduler.py`): the sort key reads `f.get("remain", -1)` straight out of `_build_loaded_filaments`, which sources it from MQTT AMS `tray.remain` — the printer firmware's own RFID-decremented value. Two problems with that signal: (a) it's only populated for Bambu RFID spools, so every non-RFID / 3rd-party / user-loaded tray reports `-1` and gets clamped to a sentinel — multiple non-RFID spools then tie in the sort and Python's stable sort collapses to AMS-slot insertion order, so slot 1 always wins; (b) even when set, it's the *printer's* counter, not Bambuddy's `label_weight - weight_used` (internal mode) or Spoolman's `remaining_weight` (Spoolman mode) — the two diverge any time the user re-spools, swaps cardboard, or runs a print outside Bambuddy. The reporter is on internal-inventory mode with non-RFID spools — both failure modes apply, hence slot 1 every time. **Fix**: when a slot is bound to a Bambuddy / Spoolman spool, that inventory record's remaining weight becomes the sort signal. New async helper `_build_inventory_remain_overrides(db, printer_id, loaded)` returns `{global_tray_id: remaining_grams}` for slots with an assignment — internal mode joins `SpoolAssignment` → `Spool` once per dispatch, Spoolman mode joins `SpoolmanSlotAssignment` then fetches each spool through the existing `_spoolman_remaining_grams` (shared with `filament_deficit.py`, parity rule per [[feedback_inventory_modes_parity]]). The new `_prefer_lowest_sort_key` consumes that map alongside the legacy MQTT field with a **two-tier** comparison: inventory-tracked spools always sort BEFORE MQTT-only spools, then ascending by remaining within each tier, then ascending by `ams_id * 4 + tray_id` as the deterministic slot tie-breaker. The tier flag dominates so we never compare grams (inventory) against percent (MQTT) — no unit-conversion contortions. MQTT-only behaviour is preserved exactly: `remain = -1` still maps to the 101 sentinel and slot order still decides on ties, so users who haven't bound any spools see no change. External / VT tray slots are skipped (tracked separately from AMS bindings). Lookup runs only when `prefer_lowest_filament` is enabled — no extra DB hit for users who don't use the preference. **Tests**: 6 new in `TestPreferLowestInventoryOverride` in `test_scheduler_ams_mapping.py` (inventory override beats MQTT remain — the literal reporter scenario with 950 g clone vs 50 g original; zero-grams still sorts first within its tier; inventory tier beats MQTT tier regardless of value; tied inventory grams break to lower slot; no-override falls through to MQTT — regression guard for un-tracked spools; legacy `remain = -1` still sentinel-sorts last when override map is None) + 7 new in `test_scheduler_inventory_remain.py` covering `_build_inventory_remain_overrides` directly (internal mode returns label_weight − weight_used per bound slot; external slots skipped; empty loaded short-circuits; over-consumed spool clamps to 0 g; unbound slots absent from map; Spoolman mode uses `_spoolman_remaining_grams` for parity; Spoolman unreachability silently omits that slot). 102 scheduler + inventory tests green; backend ruff clean.
- **X1/H2/P2 live camera no longer fails with `Address already in use` on transitional ffmpeg builds (#1504, reported by @rage03usa, confirmed by @PawseHaxor)** — On a native Ubuntu install with the Jammy-era system ffmpeg, the RTSP live-view path retried indefinitely with `Unable to open RTSP for listening … Address already in use`. Snapshots, the camera diagnostic, and OrcaSlicer all kept working — only live view was broken. Cause: the ffmpeg argv built in `backend/app/api/routes/camera.py` (added in 530a7a46 as part of an RTSP-stability bundle) passed `-timeout 30000000`. That ffmpeg version *deprecated* the original `-timeout` (socket I/O microseconds) and repurposed the name to mean the *RTSP listen-mode incoming-connection timeout* — any non-zero value **implies `-listen`**. ffmpeg then flipped into RTSP server mode and tried to bind the same localhost port Bambuddy's TLS proxy was already listening on, hence EADDRINUSE on every retry (the odd-port pattern @PawseHaxor noticed is coincidence — the ephemeral allocator just picked odd values that run). The reporter's own workaround (drop the option) works but silently loses the socket-level read timeout, so a hung TLS handshake would block past the OS TCP timeout instead of failing fast into the existing reconnect loop. **Why this can't be a one-line literal swap**: ffmpeg has shipped *three* arrangements of this option over time and Bambuddy supports the full range. Pre-deprecation builds: `-timeout` is the socket I/O timeout. Transitional builds (~late-4.x, what the reporter is on): `-timeout` is the broken listen-mode option, `-stimeout` is the replacement. **Modern ffmpeg (5.x / 6.x / 7.x — current Debian 13, Ubuntu 24.04, current Homebrew)**: `-stimeout` was removed entirely and `-timeout` is back to socket I/O. So both literals regress one half of the install base. **Fix**: a new `rtsp_socket_timeout_flag()` helper in `backend/app/services/camera.py` probes `ffmpeg -h demuxer=rtsp` once at first use and picks `-stimeout` when ffmpeg advertises it (transitional window) or `-timeout` otherwise (modern + very old). The result is cached for the process lifetime — ffmpeg won't swap mid-run. The function returns the option name without a leading dash so callers prepend it themselves (no empty-flag formatting bug). Wired into both RTSP ffmpeg call sites — `routes/camera.py` (printer camera) and `services/external_camera.py` (external RTSP) — in lockstep, same TLS-proxy + ffmpeg pattern, same regression. The reporter had tried `-listen_timeout` (doesn't help — we *don't* want listen mode) and `-rw_timeout` (AVIO-level, RTSP demuxer doesn't honour it on its control socket), but no manual swap could be correct for both transitional and modern installs simultaneously. **Tests**: 8 in `test_ffmpeg_rtsp_timeout_flag.py` — 6 unit tests for the probe (picks `-stimeout` when advertised, falls back to `-timeout` on modern, defaults to `-timeout` when ffmpeg missing or probe raises, caches across calls, substring-match guard against false-positives on `-listen_timeout`), 2 parametrised regression guards against either RTSP ffmpeg argv re-hard-coding a literal flag instead of consuming the probe. 37 (probe + existing external-camera) tests green; backend ruff clean.
- **SliceModal: process / filament dropdowns now filter by nozzle diameter too, not just printer model (#1325 follow-up #2, reported by @IndividualGhost1905)** — With the @BBL name fallback in place, the reporter saw that an X2D 0.4 selection still mixed 0.2 / 0.6 / 0.8 nozzle process variants into the main list. The fallback's regex stripped any trailing `<size> nozzle` suffix from both sides before comparing, so `"Bambu Lab X2D 0.4 nozzle"` and `"0.40mm Strength @BBL X2D 0.8 nozzle"` both reduced to `"X2D"` and matched. The bundle path was already nozzle-correct (a `.bbscfg` is scoped to one printer-preset-name including its nozzle, so the bundle-side exact-match was nozzle-aware); only the name fallback needed fixing. **Fix**: `extractPrinterPresetModel` and `extractBblToken` now each return `{ model, nozzle }`. The nozzle is the parsed string ("0.4" / "0.6" / etc.) or `null` when the name has no suffix. `classifyByBambuName` treats a `null` process nozzle as `"0.4"` — Bambu's convention is to omit the suffix on 0.4 (the default) and include it for 0.2 / 0.6 / 0.8, exactly as the reporter described. Both `model` and `nozzle` must compare equal for a `'match'`; differing nozzles fall into the existing "Other printers" group, no new group label needed. If the selected printer preset name has no parseable nozzle (non-Bambu / hand-typed), the matcher degrades to model-only — Bambu printer presets always include nozzle in practice, so this is defensive. **Tests**: 9 new in `slicerPrinterMatch.test.ts` covering the matrix (0.4 printer vs no-suffix / 0.6 / 0.8 process; 0.6 printer vs 0.6 / no-suffix-=-0.4; explicit 0.4-suffix-on-process still matches 0.4 printer; same rule on filament presets; wrong-model dominates over matching-nozzle; no-nozzle printer name degrades to model-only); one existing test reframed (the case that previously asserted a 0.6-nozzle process matched a 0.4 printer — the exact bug — now asserts mismatch). 46 slicerPrinterMatch + 34 SliceModal tests green; frontend build clean.
- **Timelapse now attaches to the archive after a backend restart mid-print (#1485 follow-up, reported by @pwostran)** — With the duplicate-archive fix from #1485 in place, a restart mid-print stopped creating ghosts — but the resulting archive came back without its timelapse video (only the finish snapshot was attached). Cause is a side-effect of the #1304 first-push guard: on the first MQTT push after Bambuddy starts (`_previous_gcode_state = None`), `is_new_print` is deliberately False so `on_print_start` doesn't fire — which prevents duplicate archive creation **but also** prevents the timelapse-baseline capture, since both live behind the same callback. At PRINT COMPLETE, `_scan_for_timelapse_with_retries` finds an empty `_timelapse_baselines` for the printer and falls into the "take baseline now" fallback in `main.py`. By that point the printer has already uploaded the in-flight MP4, so the snapshot includes it. Every retry then reports "N files found / no new files since baseline" and the scan gives up. The reporter's support bundle is the smoking gun — pre-reboot baseline of 7 files, post-reboot fallback baseline of 8 files (including the just-uploaded one), 4 retries all unable to see the diff. **Fix**: `bambu_mqtt.py` now fires a sibling `on_print_running_observed` callback inside the "Now tracking RUNNING state" branch when the first-push guard suppresses `on_print_start`. `main.py` wires it to a thin handler that fetches the printer row from DB and calls the existing `_capture_timelapse_baseline_at_start`. The callback only fires the first time we observe RUNNING per session (gated on the same `not self._was_running` branch the timelapse-flag restore already lives in), so a normal print start path is unaffected. The handler is also idempotent: if a baseline already exists for that printer, it returns without touching it. Safe because the printer doesn't upload the timelapse until *after* PRINT COMPLETE, so a baseline captured any time during the in-flight print is still pre-upload — no narrow window. The plumbing (`set_print_running_observed_callback` setter, in-`connect_printer` wrapper, constructor pass-through) mirrors the existing `on_print_start` / `on_print_complete` callback chain in `printer_manager.py`. **Tests**: 7 new in `TestPrintRunningObservedCallback` in `test_bambu_mqtt.py` (fires on first RUNNING after startup, doesn't double up with `on_print_start`, fires only once per session, skips on non-RUNNING / missing file / no-callback-set, payload shape mirrors `on_print_start`); 3 new in a dedicated `test_timelapse_baseline_restart_recovery.py` (handler captures the printer's existing-videos snapshot into `_timelapse_baselines`, skips when a baseline already exists, skips when the printer row was deleted between push and handler). 336 MQTT + print-start + timelapse tests green; backend ruff clean.
- **SliceModal: process / filament dropdowns now filter for users who haven't uploaded slicer bundles (#1325 follow-up, reported by @IndividualGhost1905)** — The original #1325 fix replaced a stale hardcoded `@BBL <model>` allow-list with bundle-based compatibility: a process / filament preset was classified against the selected printer by consulting the user's uploaded Slicer Bundles (.bbscfg). That works perfectly for users who have uploaded bundles for every printer their cloud catalogue covers — and silently no-ops for everyone else: every cloud preset resolves to `'unknown'`, nothing moves into "Other printers", and the dropdown looks identical to the pre-fix state. **Fix**: restored the `@BBL <token>` name fallback as a third tier *below* the bundle path, but with the token-to-printer mapping driven by **the backend's canonical `PRINTER_MODEL_MAP`** (`backend/app/utils/printer_models.py`) instead of a duplicated frontend table. A new `GET /api/v1/slicer/printer-models` route ships the mapping unmodified; `slicerPrinterMatch.buildCompatibilityIndex` accepts it as a second arg, inverts it into a short-code → display-fragment table (`X1C` → `X1 Carbon`, `P2S` → `P2S`, `A1 Mini` → `A1 mini`, …), and `presetCompatibility` uses it only after `compatible_printers` and the bundle index have already returned `'unknown'`. The match is case- and whitespace-insensitive (`"A1 mini"`, `"A1 Mini"` and `"a1mini"` all compare equal). When the registry doesn't list a token, the matcher falls back to comparing the raw token against the printer-preset model fragment — so a brand-new "Q1" printer with `@BBL Q1`-tagged presets matches without any code change. Adding a new model only requires updating the existing backend `PRINTER_MODEL_MAP` (already the single source of truth for `is_dual_nozzle_model`, the rod-type/ethernet registries, and 3MF metadata normalisation) — no frontend table to keep in sync. **Tests**: 2 new in `test_slicer_presets.py` (`/printer-models` returns the full `PRINTER_MODEL_MAP`; the route hands back a copy, not the live module dict); the existing 25 `slicerPrinterMatch.test.ts` cases were extended to 36 covering: registry-driven X1C vs X1 Carbon match, A1 vs A1 mini disambiguation, H2D vs H2D Pro disambiguation, the previously-missing P2S / H2C / H2S / X2D, raw-token fallback for unregistered models, graceful degradation when the registry fetch hasn't resolved yet, the `compatible_printers`-wins-over-name rule, and the bundle-wins-over-name rule. 38 slicer-presets + 36 slicerPrinterMatch tests green; backend ruff clean; frontend build clean.
- **Cloudflare-fronted Bambuddy no longer needs an `unsafe-inline` override to load (#1460 follow-up, reported by @Soopahfly)** — A Bambuddy instance behind Cloudflare logged an inline-script CSP violation on every page load: Cloudflare's bot-detection script (`/cdn-cgi/challenge-platform/scripts/jsd/main.js`) is injected into the HTML on the edge with a hash that changes per request, so it can never be allowlisted by `script-src` hash. The contributor's workaround was to relax `script-src` to `'unsafe-inline'` in their Nginx Proxy Manager — which works but defeats most of the CSP. **Fix**: the SPA CSP now stamps a fresh per-request **nonce** into `script-src` (`'self' 'nonce-<base64>'`). Per [Cloudflare's documented behaviour](https://developers.cloudflare.com/cloudflare-challenges/challenge-types/javascript-detections/#if-you-have-a-content-security-policy-csp), when a nonce is present in the CSP header Cloudflare clones the same nonce onto its injected `<script>` and the inline script passes without `'unsafe-inline'`. Bambuddy's own `index.html` has had no inline scripts since the SW registration moved to `/sw-register.js` (#1460 first PR), so no HTML body rewriting is needed — `'self'` continues to cover every script the app ships. Implemented via a 16-byte `secrets.token_urlsafe()` nonce computed per request in `security_headers_middleware`. **Separately**, `/manifest.json`, `/sw.js` and `/sw-register.js` are now registered with `@app.api_route(methods=["GET", "HEAD"])` instead of `@app.get` — a plain `curl -I https://host/manifest.json` (and several uptime scanners) HEAD-probe these routes and were getting `405 Method Not Allowed`, which surfaced in the issue as an apparent manifest-server bug. **Tests**: 3 new in `test_security_headers.py` — `'nonce-…'` is stamped into the SPA `script-src` directive while `'self'` remains and `'unsafe-inline'` does not; the nonce is fresh per request across 5 sequential calls (collision probability ~0); HEAD on `/manifest.json`, `/sw.js`, `/sw-register.js` never returns 405. 22 security-header tests green; backend ruff clean.
- **Insufficient-filament pre-print warning now fires on every dispatch path (#1496, reported by @needo37)** — The "Pre-print checks now also warn when the spool has insufficient material" guard from #720 only fired on the `PrintModal` submit path. Two other queue-dispatch paths bypassed it entirely: the green ▶ Play button on a staged (`manual_start`) queue row called `POST /queue/{id}/start`, which only flipped the manual_start flag with no filament check; and the Virtual Printer queue-mode intake (`virtual_printer/manager._add_to_print_queue`) parsed per-slot requirements for *type* matching only — never weight. With `auto_dispatch=True` the scheduler would then dispatch unsupervised onto a doomed-to-fail spool. **Fix**: extracted the per-slot deficit calculation into a single backend helper (`backend/app/services/filament_deficit.py`) that both the route and the dispatch scheduler call against live spool state. Works for internal-inventory mode (`SpoolAssignment` → `Spool.label_weight - weight_used`) and Spoolman mode (`SpoolmanSlotAssignment` → `SpoolmanClient.get_spool`); Spoolman unreachability returns no deficit rather than wedging the queue. The `disable_filament_warnings` setting is honoured at the service boundary. `POST /queue/{id}/start` now returns `409 {detail: {code: 'insufficient_filament', deficit: [...]}}` when short; the `?skip_filament_check=true` query param is the "Print Anyway" bypass. The dispatch scheduler runs the same check just before each `_start_print` call: a deficit promotes the item to `manual_start=True` + `filament_short=True` (so the user must consciously click ▶) and a previously-flagged item whose spool was swapped to one with enough material clears the flag automatically on the next tick. A new `filament_short` boolean column on `print_queue` carries the flag; the queue row now renders a yellow "Insufficient filament for the assigned spool" badge when set, and the ▶ button catches the 409, opens an `Insufficient Filament / Print Anyway` confirm modal showing each shorted slot's required-vs-remaining grams, and on confirm re-issues the start with the skip flag. Migration is idempotent and branches on `is_sqlite()` for the `BOOLEAN DEFAULT` syntax. **Tests**: 8 in `test_filament_deficit.py` (deficit + sufficient + missing mapping + no printer + disabled-warnings + no-assignment + missing 3MF + multi-slot only-shorted-returned), 4 in `test_scheduler_filament_deficit.py` (block-on-deficit, clear-stale-flag, no-deficit no-op, helper-exception doesn't wedge), 2 new in `test_print_queue_api.py` (`/start` returns 409 + structured payload, `?skip_filament_check=true` bypasses), and 2 frontend tests in `QueuePage.test.tsx` (badge renders on flagged row, ▶ click → 409 → modal → retry with `skip_filament_check=true`). 3392 unit + 63 print-queue integration green; backend ruff clean; frontend build + i18n parity (9 locales × 4979 keys) clean.
- **File Manager "All Files" view showed nothing when every file lived in a subfolder (#1499)** — The sidebar entry was meant to list every file across the library but instead returned only files at the library root, so a library with two folders and three files (all nested) appeared empty. Cause was an inverted boolean on the React Query call: `getLibraryFiles(selectedFolderId, selectedFolderId === null)` passed `include_root=true` for the "All Files" selection, which on the backend (`library.py` `list_files`) means *root files only* — the opposite of what the UI wanted. **Fix**: pass `include_root=false` for "All Files" so the backend returns every active file across folders (it remains a no-op when a specific folder is selected — `folder_id` takes precedence). A new vitest regression case renders the page with one root file and one nested file and asserts both appear, and that the request goes out with `include_root=false`. 48/48 FileManagerPage tests green; frontend build clean.
- **Archive filament colour now reflects the assigned inventory spool, not the slicer's 3MF (#1494, reported by @IndividualGhost1905)** — A user added a `#000000` black filament to the built-in inventory, assigned it to the printer, and printed from the desktop slicer; the print, AMS and inventory all showed it as black and the correct spool's weight decremented — but the resulting archive (and the Color Distribution graph) showed `#161616`. Root cause is two independent colour sources: an archive's `filament_color` is parsed verbatim from the print job's 3MF (`archive.py` `_extract_filament_info` reads `filament_colour` from `project_settings.config`), which carries the *slicer's* filament-slot colour — a value the user picks separately from the exact hex they curate on the Bambuddy inventory spool. The two are "close but not equal" (slicer near-black `#161616` vs inventory `#000000`), which is exactly the "always a similar colour, never an unrelated one" pattern the report describes. **Fix**: once usage tracking has resolved the print's filament slots to inventory spools, the spool colours are authoritative — `_track_from_3mf` (built-in inventory) and `report_usage` (Spoolman mode) now overwrite the archive's `filament_color` with the slot-ordered, de-duplicated colours of the matched spools. The rewrite is **all-or-nothing**: it only applies when *every* used slot resolved to a spool that carries a colour, so a partially-mapped multi-colour print never silently loses the unmatched slots' colours (the 3MF value is kept). Shipped for both inventory modes in the same drop — built-in spools read `Spool.rgba`, Spoolman spools read the spool's `filament.color_hex` (fetched for tag-less slot-assignment matches). New helpers `_spool_color_to_hex` / `_archive_colors_from_spools` in `usage_tracker.py`, reused by `spoolman_tracking.py` via `_apply_spool_colors_to_archive`. **Tests**: 12 new in `test_usage_tracker.py` (hex normalisation, the all-or-nothing slot-colour rule across single/multi/partial/no-colour/AMS-fallback cases, and end-to-end that a `#000000` spool rewrites a `#161616` archive) + 4 in `test_spoolman_tracking.py` (the Spoolman-mode rewrite, empty/partial/missing-archive no-ops). 70 usage + Spoolman tracking tests green; backend ruff clean.
- **Re-slicing across the single-nozzle / dual-nozzle boundary now actually works (#1493)** — Re-slicing a model sliced for a single-nozzle printer (X1C, P1S, A1, P2S, …) onto a dual-nozzle printer (H2D / H2D Pro) — or vice versa — produced one of two BambuStudio failures: *"Found G-code in unprintable area of multi-extruder printers"* (the source's X1C-coordinate layout drops into the H2D's per-nozzle dead zone) or, on multi-color projects, a hard SIGSEGV inside the slicer's `ZFiller` polygon-clipping pipeline. An earlier release shipped a fail-fast `400` guard so the user got a clear message instead; this release lifts the guard and actually does the conversion — by forwarding the sidecar's existing `--arrange` flag (it was already plumbed all the way to the CLI in `orca-slicer-api/src/routes/slicing/slicing.service.ts:152`; Bambuddy just wasn't surfacing it). With `arrange=true` BambuStudio repositions objects for the target bed and reconciles the embedded `project_settings.config` against the new printer, the same way the GUI's "Switch Printer" operation does. Empirically: a Mecha Mewtwo X1C archive that previously SIGSEGV'd on H2D now slices in 14.5s producing a 28 MB 3MF with valid H2D G-code, and the simple-test pair (#141 → H2D) which previously hit "G-code in unprintable area" also slices clean. **Wired into `_run_slicer_with_fallback`** on a true class-crossing only (`is_dual_nozzle_model(source) != is_dual_nozzle_model(target)`) so single-printer slices preserve the user's deliberate layout. Threads through both `slice_with_profiles` and `slice_with_bundle` (preset and bundle dispatch). `guard_nozzle_class_reslice` becomes a kept-for-compat no-op; call sites in `archives.py` and the library re-slice route remain so external forks don't break their links. The earlier `is_dual_nozzle_model()` / `DUAL_NOZZLE_MODELS` centralisation stays put — the new cross-class detector reuses it. **A separate related bug surfaced during testing**: the SliceModal lets the user pick a filament profile per slot, but each plate only uses a subset of those slots. The unused-slot dropdowns get whatever default the modal serves up — and a heterogeneous default (e.g. ABS in slot 2 next to a PLA in the used slot 1) makes BambuStudio reject the slice with *"the temperature difference of the filaments used is too large"* (exit 194), even though the plate's G-code never touches the unused slot. Bambu validates every loaded filament for material compatibility regardless of which slots are actually used. **Fix**: a generic `substitute_unused_plate_filaments` helper runs for both preset and bundle dispatch when a 3MF + plate are involved. It reads the source 3MF's per-plate extruder set via the existing `extract_plate_extruder_set_from_3mf` (the same logic that drives the modal's "not used by this plate" label) and overwrites any unused-slot entry with slot 1's selection before the slice. The per-slot array length stays intact (so source-3MF references still resolve), the loaded-filament set becomes materially homogeneous (so the validator passes), and the plate's G-code is unaffected because it never touched the unused slots in the first place. Fail-open everywhere — no plate, unparsable 3MF, single-filament list, or empty extruder-set parse all return the input unchanged. Applies to same-class slices too, which is why this lives outside the cross-class branch. **Tests**: 17 in `test_slicer_3mf_convert.py` covering `extract_source_printer_model` (returns canonical short codes, an integration check that the result feeds straight into `is_dual_nozzle_model` end-to-end since the raw field is `"Bambu Lab H2D"` not `"H2D"`, handles malformed/non-zip/empty inputs) and `substitute_unused_plate_filaments` (substitutes unused slots, no-op when all used / no plate / single filament / unparsable source); 3 new in `test_slicer_api.py` (preset and bundle paths both emit a multipart `arrange=true` field when set, omit it entirely when default-false so the pre-#1493 wire shape is preserved); guard suite in `test_library_slice_api.py` rewritten to assert the no-op semantics. Empirically validated end-to-end against the live sidecar: X1C source 3MF + H2D triplet + `--arrange` slices clean for both the simple test pair and the multi-color Mecha Mewtwo statue. **Card display fixes for re-sliced archives**: BambuStudio CLI rarely emits a fresh ``Metadata/plate_N.png`` for the sliced plate (slice writes the new gcode but leaves the preview slot empty — and ``--arrange`` doesn't change that), so the previous per-plate preview the archive card relied on was simply missing on every re-sliced output. The slice route now picks the cover image in this order: (1) the *source* archive's ``Metadata/plate_{N}.png`` — the GUI-rendered preview of the same plate, which is what the user expects to recognise on the card; (2) the sliced output's own per-plate render if BS did happen to write one; (3) the project-wide thumbnail under ``Auxiliaries/.thumbnails/`` (``_middle.png`` / ``_small.png`` / ``_3mf.png``) — the MakerWorld-style cover art that gets embedded at project import time. Without (1), the card always fell all the way through to (3) and ended up showing marketing art rather than a render of the actual print. A new ``_read_3mf_entry`` helper extracts a single zip entry safely (no parser overhead, fails open on bad zips). The ``ThreeMFParser`` fallback chain was extended to include the Auxiliaries paths so the non-archive callers (library files, etc.) also benefit when neither per-plate variant is present. Second card gap: the re-sliced archive's ``bed_type`` lived in ``extra_data`` but not on the top-level ``PrintArchive.bed_type`` column the ``ArchiveCard`` actually reads — lifted it through, with a fallback to the source archive's value when the sliced output is sparse. 2 new tests in ``test_archive_service.py`` (Auxiliaries thumbnail fallback works, per-plate preview wins when both are present) and 4 in ``test_library_slice_api.py`` (re-sliced ``bed_type`` reflects the slicer's curr_bed_type and falls back to source on missing; re-sliced thumbnail prefers source's per-plate render over the Auxiliaries cover, and falls back to Auxiliaries when the source has no per-plate render either). 647 archive/library/slice tests green; backend ruff clean.
- **Sliced files no longer report "0 g" filament usage** — A slice result — and the re-sliced archive's card — showed `filament_used_g: 0` (and `0 mm`) even for a real multi-hour print, while the print time came through fine. Bambuddy reads filament totals from the slicer sidecar's `X-Filament-Used-G` / `X-Filament-Used-Mm` response headers, and some sidecar builds simply don't populate them. **Fix**: `ThreeMFParser._parse_gcode_header` now also reads the slicer's own totals — `; total filament weight [g] : …` and `; total filament length [mm] : …` — from the produced 3MF's G-code header (verified against a real sliced output: 126.26 g / 41661.4 mm extracted correctly). Both slice-persist paths (`slice_and_persist` for library files, `slice_and_persist_as_archive`) now fall back to those parsed totals when the sidecar header is 0, applying the corrected figure to the stored metadata, the archive's `filament_used_grams` column, and the slice response. The G-code-header read is a fallback only — `slice_info.config` still wins when it carries per-filament `used_g`. **Tests**: 2 new in `test_archive_service.py` (`_parse_gcode_header` extracts weight + length; absent header lines leave the keys unset). 36 archive-service + 23 slice-API tests green; backend ruff clean.
- **A failed slice now opens an error modal instead of a toast that vanishes before it can be read** — Slice failures surfaced through `SliceJobTrackerContext` as a transient error toast, which `ToastContext` auto-dismisses after a flat 3 seconds. Now that a slice failure carries an actionable message — the slicer's own reason, e.g. *"Some objects are located over the boundary of the heated bed."* — 3 seconds is not enough to read it, let alone act on it. **Fix**: a new `AlertModal` component (a small acknowledge-only modal: title, optional subtitle, message, single Close button; Escape / click-outside to dismiss — modelled on `ConfirmModal` but one button). On a failed slice job, `SliceJobTrackerContext` now shows `AlertModal` with the filename as subtitle and the slicer's reason as the body, instead of the error toast — the user dismisses it themselves. Successful slices keep the existing 3 s success toast; the persistent in-progress toast is still cleared on terminal state. New `slice.failedTitle` key translated across all 9 locales. **Tests**: 4 new in `AlertModal.test.tsx` (renders title/subtitle/message, Close button and Escape both fire `onClose`, subtitle line omitted when absent). Frontend build clean; i18n parity holds.
- **Re-slicing for a different printer no longer silently produces a file for the original printer** — Re-slicing an archive or library file for another printer (e.g. an H2D model re-sliced for an X1C) could hand back a file still sliced for the *original* printer, with no error. `_run_slicer_with_fallback` has an embedded-settings fallback built for one narrow case — a 3MF whose `--load-settings` path *crashes* the slicer CLI (#1201) — but its `except SlicerApiServerError` caught **every** sidecar 5xx, including the slicer running fine and *rejecting the job for a real reason*: e.g. exit 204 "objects over the boundary of the heated bed" (the model is laid out for the source printer's larger bed and doesn't fit the target's) or exit 194 "temperature difference of the filaments is too large". On those, Bambuddy retried with `slice_without_profiles`, which slices using the source 3MF's **embedded** settings — i.e. the original printer — and presented the result as success. The cross-printer slice itself works (CLI logs confirm the target bed `{256,256,250}` was applied); the fallback was masking legitimate rejections. **Fix**: a new `_slicer_rejection_message` helper detects the sidecar marker that means the slicer ran and rejected the job (`"Slicing failed with error from slicer:"`) and extracts the slicer's own reason. Such failures now surface as a `400` with that reason (e.g. *"Some objects are located over the boundary of the heated bed."*) instead of falling back. The embedded-settings fallback is kept only for genuine CLI crashes, which carry no slicer error string. Net effect: a cross-printer re-slice either succeeds for the chosen printer or tells the user exactly why it can't — it never silently returns a file for the original printer. **Tests**: 5 new in `test_library_slice_api.py` — 4 unit tests for `_slicer_rejection_message` (extracts the bed-boundary and filament-temp reasons, returns `None` for a generic CLI crash so that still falls back, handles empty/unrelated text) and an integration test asserting a slicer rejection fails the job with status 400 and the slicer's reason, with no fallback retry. The #1201 fallback test and the STL terminal-failure test (both using a generic error message) still pass unchanged. 23 slice-API tests green; backend ruff clean.
- **Re-sliced archive now shows the printer it was sliced for, not the source's printer** — Re-slicing an archive for a different printer (e.g. an X1C archive re-sliced for an H2D) produced a new archive still labelled "sliced for X1C". `slice_and_persist_as_archive` set the new `PrintArchive.sliced_for_model` to `source_archive.sliced_for_model` — blindly inherited from the source — even though the freshly-sliced 3MF embeds the actual target printer, which `ThreeMFParser` already extracts into `parsed_metadata["sliced_for_model"]` (the new archive's `extra_data` JSON even had the correct value; only the dedicated column was wrong). **Fix**: read `sliced_for_model` from the sliced output's parsed metadata, falling back to the source archive only if the output 3MF doesn't carry it — the same `parsed_metadata.get(...) or source_archive...` pattern already used two lines up for filament type/color. **Test**: new `TestSliceArchiveResliceModel` integration test re-slices an X1C-stamped archive with a mock sidecar returning an H2D-embedded 3MF and asserts the new archive is stamped H2D while the source stays X1C. 18 slice-API tests green; backend ruff clean.
- **Self-hosted Inter font now actually loads — `/fonts/*.woff2` was not served (#1460 follow-up)** — The browser console logged `downloadable font: rejected by sanitizer` for `inter-latin.woff2` on every page load. The #1460 PWA fix added `@font-face` rules pointing at `/fonts/inter-latin.woff2` and bundled the woff2 files into `static/fonts/`, but `main.py` only mounts `/assets`, `/img` and `/icons` as static directories — there was no `/fonts` mount. So `/fonts/*.woff2` fell through to the SPA catch-all and returned `index.html` with `200 OK`; the browser's OpenType sanitizer then rejected the HTML-as-a-font. The woff2 files themselves are valid (verified — Inter variable, latin + latin-ext subsets). **Fix**: added a `/fonts` `StaticFiles` mount alongside the existing `/img` and `/icons` mounts. Additionally, the service worker had cached the bad response: `sw.js` lists the two font URLs in `STATIC_ASSETS` and `cache.addAll()` treats the `200 OK` HTML as a successful fetch, so it stored `index.html` under the font URLs in the static cache and served it cache-first. The SW `STATIC_CACHE` version is bumped (`v26` → `v27`) so the `activate` handler purges the poisoned cache and re-fetches the real fonts on next load. The UI falls back to a system sans-serif until deployed, so there is no visible breakage — only the console warning.
- **Library files now display the filename, not the embedded 3MF Title (#1489, reported by @needo37)** — File Manager cards, search and sort keyed off `file_metadata.print_name`, which `ThreeMFParser` lifts from the 3MF's `<metadata name="Title">`. That title is the in-app project title — generic `"Exported 3D Model"` for any Bambu Studio "Save As", a marketing title for a MakerWorld download — and almost never the filename the user actually saved. So a card for `Whatever.3mf` showed `Exported 3D Model`, and the only way to correct it was a rename round-trip (the Rename dialog's Save button is disabled while the name is unchanged, so the user had to rename to a different name and back). The slicer-output write path already dropped `print_name` for exactly this reason; the **four** other write paths that store parsed 3MF metadata onto a `LibraryFile` did not — external-folder scan, managed multipart upload, the multi-file ZIP-upload branch, and MakerWorld import. **Fix**: a shared `_without_print_name()` helper strips `print_name` from library-file metadata, applied at all four import paths (and the slicer path switched to it, so there is one rule). A `LibraryFile`'s display name is its filename; only `PrintArchive` carries a real `print_name`, and that is untouched. The now-redundant filename→`print_name` mirroring in the rename route is removed. A one-time data migration (`_migrate_drop_library_print_name`, idempotent, SQLite `json_remove` / PostgreSQL `jsonb` key-removal branched on `is_sqlite()`) clears `print_name` from rows imported before the fix, so existing libraries correct themselves without the rename workaround. No frontend change — `print_name || filename` naturally yields the filename once `print_name` is gone. **Tests**: 6 new in `test_library_print_name.py` — `_without_print_name` (strips, keeps siblings, `None` pass-through, no-op identity return, no input mutation, print-name-only → `{}`) and the migration (clears `print_name`, leaves siblings and metadata-free rows alone, idempotent). 109 library + dialect tests green; the migration's PostgreSQL branch additionally ran live against real Postgres during the integration-test app boot. Backend ruff clean.
- **Camera: ffmpeg's stderr is now captured when an RTSP stream stalls instead of only when ffmpeg crashes (#1395, reported by @Tschipel)** — A P2S support bundle taken on 0.2.5b1 (the per-model probesize fix already applied) showed the camera still failing: ffmpeg connects, stays alive 30+ seconds, emits zero JPEG bytes, the stream's 30 s `stdout.read` times out, reconnect loop repeats — but with **no ffmpeg stderr anywhere in the log** to say why. Root cause was a diagnostic bug, not the camera path: `_read_ffmpeg_stderr` called `process.stderr.read()` (read-to-EOF). A stalled-but-still-alive ffmpeg — exactly the P2S RTSP failure mode — never closes stderr, so the read blocked until the 2 s `wait_for` timeout and returned `None`, discarding the banner + stream-analysis lines ffmpeg had already printed. ffmpeg's stderr was therefore captured *only* when it fully exited; the earlier "not enough frames to estimate rate" smoking gun was available only because ffmpeg crashed back then, and once the probesize bump turned the crash into a hang the diagnostic went dark. **Fix**: `_read_ffmpeg_stderr` now drains stderr incrementally in bounded 8 KB chunks (64 KB cap), returning whatever ffmpeg has printed so far whether or not it has exited — so a hung stream is self-describing in the next support bundle. Additionally, `generate_rtsp_mjpeg_stream` now logs the resolved per-model `probesize` / `analyzeduration` on the info-level "Starting RTSP camera stream" line (verifiable without debug logging), and the debug-level ffmpeg-command line logs the full argv with only the credential-bearing camera URL redacted, instead of hiding the entire command. No behaviour change to streaming itself — this makes the still-unresolved P2S RTSP stall diagnosable. **Tests**: 4 new in `test_camera_stderr_summary.py` cover `_read_ffmpeg_stderr` capturing output from a *running* (un-exited, no-EOF) ffmpeg — the regression — as well as the exited case, the no-stderr-pipe case, and banner-only output summarizing to `None`. 9 camera-stderr tests green; backend ruff clean.
- **Camera diagnostic (stethoscope) was missing from the pop-out camera window (#1395, reported by @Tschipel)** — The #1395 camera-diagnostic follow-up — stethoscope icon in the control bar, **Diagnose** button in the stream-error state, `CameraDiagnoseModal` — shipped wired into `EmbeddedCameraViewer.tsx` only, the *embedded* camera mode. It was never added to `CameraPage.tsx`, the standalone window that opens at `/camera/{id}` when `camera_view_mode` is `window` (the default). The reporter's support bundle had `"camera_view_mode": "window"`, so they were on `CameraPage` the whole time and genuinely could not see the stethoscope no matter how many container rebuilds or cache clears they tried — the JS bundle did contain the `camera.diagnose` strings (they come from `EmbeddedCameraViewer`), but that component never renders in window mode. Switching to overlay mode made it appear instantly, exactly as the reporter found. **Fix**: ported the diagnostic into `CameraPage.tsx` — the `Stethoscope` control-bar button (between **Refresh** and **Fullscreen**, matching the embedded viewer), a **Diagnose** button next to **Retry** in the `streamError` block, and the `CameraDiagnoseModal` render. No new i18n keys — `camera.diagnose.*` already exist in all 9 locales. The backend per-model camera-profile fix from the same issue is view-mode-agnostic and already applied; this only makes the diagnostic reachable in the default window mode. Frontend build clean.
- **Camera: P2S RTSP stream no longer drops every frame after the first (#1395, reported by @Tschipel)** — With the stderr-capture diagnostic fix in place, a fresh P2S support bundle finally showed ffmpeg's reason for the stall: `frame=1 time=00:00:00.06 dup=0 drop=526 speed=0.0037x`. ffmpeg connects fine and frames *are* arriving (the `drop` counter climbs steadily, ~15/s) — but it emits exactly one output frame and the output clock freezes at 0.06 s. **Root cause**: the streaming ffmpeg command ends with `-r 15`, which puts ffmpeg in CFR (constant-frame-rate) mode — it drops/dupes input frames to hit 15 fps *based on the source's timestamps*. P2S firmware 01.02.00.00 sends an RTSP stream whose RTP timestamps don't advance (every frame is stamped ~0.06 s), so CFR sees every frame after the first as a same-timestamp duplicate and drops it. The browser gets one frame, then nothing → "connection lost", reconnect, repeat. This is why snapshot capture works on the same printer (that path has no `-r`, so no CFR conversion — timestamps are irrelevant) and why X1/H2 are unaffected (their firmware sends correct, advancing timestamps). The earlier "increase probesize" fix was real but had been masking this second bug — once ffmpeg got past the probe, the timestamp bug surfaced. **Fix**: the P2S camera profile gains `-use_wallclock_as_timestamps 1` as an ffmpeg input arg (via the existing `extra_ffmpeg_input_args` hook — no dataclass change, no other model touched). ffmpeg then rebuilds each packet's PTS from arrival wall-clock time, the output clock advances normally, and `-r 15` CFR conversion works as intended. **Tests**: 2 new in `test_camera_profiles.py` — the P2S profile splices the flag and value as an adjacent pair, and the default profile keeps an empty `extra_ffmpeg_input_args` so the override never leaks to X1/H2. 13 camera-profile tests green; backend ruff clean.
- **A backend restart mid-print no longer duplicates the job in the archive (#1485, reported by @pwostran)** — When the server running Bambuddy restarted during an active print, the running job was duplicated in the archive — and deleting the duplicate didn't help: every subsequent restart while the print was still running spawned a fresh one. Both support bundles confirmed it: `WARNING Found stale 'printing' archive 3 (age: 9:46:23), marking as cancelled and creating new archive` → `Created archive 4`. On reconnect `on_print_start` fires (Bambuddy sees the printer running) and tries to re-attach to the existing archive in `main.py`. The reliable match is by `subtask_id`; the fallback is a name match plus — and this was the bug — a **4-hour staleness heuristic**: a name-matched `printing` archive older than 4h was assumed dead, marked `cancelled`, and a new archive created. Bambu prints routinely run far longer than 4h, so a genuine long print's *live* archive was destroyed and duplicated on every restart. **Two root causes, both fixed.** **(1) Queue/scheduled archives never persisted a restart-stable `subtask_id`.** Bambuddy mints a per-job id (`project_id`/`subtask_id`/`task_id`) inside `start_print` when it sends the `project_file` command, and the printer echoes it back — but often not within the ~10s before `on_print_start` first fires, so the expected-print branch's `if subtask_id and not archive.subtask_id` write got an empty value and the archive was left with no id. A later restart then had nothing to match on and fell through to the fragile name path. Fix: `BambuMQTTClient.start_print` now records the minted id on `last_dispatch_subtask_id`, and `on_print_start` falls back to it when the printer hasn't echoed `subtask_id` yet — so every dispatched archive persists a stable id and a restart resumes it by id, age-independent. **(2) The 4-hour cutoff itself.** Replaced with a progress-aware check: when a name-matched `printing` archive is found on restart, the printer's *current* reported progress decides resume-vs-stale, not wall-clock age. Real progress (or unknown progress — printer offline) always resumes the existing archive. It is only treated as a stale leftover when the printer clearly shows a *different, freshly-started* print — under 1% progress on an archive more than 2h old, a state a real in-progress print is never in. The arbitrary 4h constant is gone. **Net effect**: a restart mid-print resumes the existing archive (`started_at`, energy, timelapse intact) instead of ever cancelling it and creating a duplicate. **Tests**: 2 new in `test_bambu_mqtt.py` (`start_print` records `last_dispatch_subtask_id`, and updates it per submission); new `TestStaleVsResume` in `test_subtask_archive_resume.py` — 6 cases pinning the progress-aware decision (long print mid-run resumes; barely-started long print resumes; ~0% + old archive is stale; ~0% + young archive resumes; unknown progress never cancels; the sub-1%/2h boundary). 472 print-start / MQTT / scheduler / dispatch tests green; backend ruff clean.
- **File Manager no longer polls the printer over FTPS every 30 seconds while open (#1480, reported by @OscarsWorldTech)** — The reporter's P1S churned through MQTT disconnect/reconnect cycles and timelapse downloads silently failed. The support bundle showed the real picture: during the churn windows, MQTT (`Connection stale - no message for 60.2s`), FTPS (`_ssl.c:1015: The handshake operation timed out`) and the camera all timed out *together* and recovered together — the P1S's embedded controller saturating, not a network fault (wifi -44 dBm, Docker host networking). A visible contributor on Bambuddy's side: `FileManagerModal.tsx` ran its `getPrinterFiles` query with `refetchInterval: 30000`, so every 30 s while the File Manager modal sat open it opened a *fresh* FTPS connection — full TLS handshake — to re-list the current directory. A printer's file list doesn't change on its own; it only changes on upload / delete (the modal's mutations already `invalidateQueries`) or when a print finishes. The blind 30 s poll was pure load, and on a fragile controller like the P1S it was enough to tip MQTT and FTP into the timeouts above. **Fix**: the `refetchInterval` is removed. The listing still refreshes on modal open, on directory / tab change (the path is in the query key), after every upload / delete, and via the existing manual Refresh button — so nothing stops updating, the printer just isn't hammered. Reduces steady-state FTPS connection load while the modal is open from one handshake every 30 s to zero. 19 FileManagerModal tests green; frontend build clean.
- **STL thumbnail generation failures now log a full traceback** — Surfaced by the #1480 support bundle: every STL in the reporter's library failed thumbnail generation with `unsupported operand type(s) for /: 'str' and 'str'`, but `generate_stl_thumbnail`'s `except` handler logged only the bare exception message — no traceback, no line number. The fault could not be reproduced from a clean STL across path shapes (`#` and spaces in the path), `str` vs `Path` arguments, or large meshes that exercise `simplify_quadric_decimation`, so it is data- or environment-specific and the message alone is not enough to locate it. `stl_thumbnail.py` now passes `exc_info=True` on that warning, so the next support bundle carries the traceback and the exact failing line. No behaviour change to thumbnail generation itself.
- **Slicer: the Process / Filament dropdowns now filter by printer using the uploaded Slicer Bundles instead of guessing from preset names (#1325, reported by @IndividualGhost1905)** — After the printer-preset pre-selection landed, the reporter found the Process Profile dropdown still showed a flat mix of `@BBL X1C` and `@BBL P2S` presets with the printer set to X1C — P2S presets that should have dropped into the trailing "Other printers" group sat in the main list. **Root cause**: `frontend/src/utils/slicerPrinterMatch.ts` resolved each cloud / standard preset's printer by parsing the `@BBL <model>` suffix of its name against a hard-coded `KNOWN_MODEL_CODES` allow-list. That list (`X1C, X1E, X1, P1S, P1P, A1M, A1, H2D, H2S`) was missing `P2S` (and `H2C`, `X2D`), so every `@BBL P2S` preset parsed to an empty model-code set, `presetCompatibility` returned `unknown`, and the dropdown keeps `unknown` presets in the main list (only `mismatch` moves to "Other printers"). It was a maintenance trap by construction: every new Bambu model silently broke filtering until someone edited the list. **Fix**: the name-suffix heuristic and both hard-coded model tables (`KNOWN_MODEL_CODES`, `PRINTER_NAME_PATTERNS`) are removed. Compatibility is now read from ground truth — the user's uploaded Slicer Bundles (`.bbscfg`). Each bundle is scoped to one printer and lists the process / filament presets it ships, so "process P works with printer X" holds exactly when some uploaded bundle for printer X contains P. `buildCompatibilityIndex` builds a `presetName → {printer names}` index per slot from `GET /slicer/bundles` (already fetched by the modal), and `presetCompatibility` consults it — still preferring an imported preset's own `compatible_printers` list when present. A newly released Bambu model is covered the moment its bundle is uploaded, with no code change. Presets no bundle covers stay in the main list (`unknown` is never hidden), so a user with no bundle imported sees the un-filtered list rather than a wrong one. `printerPresetCode` / `presetModelCodes` are gone; `SliceModal` passes the bundle-derived index to `PresetDropdown`, `pickProcessDefault`, and `pickFilamentForSlot` in place of the old model code. **Tests**: `slicerPrinterMatch.test.ts` rewritten — 12 tests covering `buildCompatibilityIndex` (per-printer mapping, multi-bundle union, `# ` user-clone-prefix stripping, empty-printer skip) and `presetCompatibility` (imported-tier `compatible_printers` exact match, bundle-driven match / mismatch / unknown, the #1325 P2S-into-X1C repro, no-bundles and no-printer-selected cases). 32 SliceModal tests green; frontend build clean; backend ruff clean.
- **PWA: Bambuddy can now be installed as an app on Android, and the font is self-hosted (#1460, reported by @Soopahfly)** — Reporter could install Bambuddy as a PWA on desktop but not on an Android phone (Pixel 9 Pro XL, failing in both Chrome and Edge). A thorough remote-DevTools trace confirmed the manifest was valid, all icons/screenshots present, and the service worker activated, running, and controlling the page — DevTools reported no installability blockers — yet no install prompt ever appeared. **Two root causes, both Bambuddy-side.** **(1) No in-app install trigger.** Chrome for Android removed the automatic install mini-infobar in Chrome 108 (2022); since then a site must either listen for `beforeinstallprompt` and surface its own button, or the user must dig into the browser's ⋮ menu. Desktop Chrome still auto-shows the omnibox install icon, which is exactly why desktop "worked" and Android didn't. Bambuddy had no `beforeinstallprompt` handler at all, so on Android there was no discoverable install path. New `frontend/src/components/InstallAppButton.tsx` captures the `beforeinstallprompt` event (calling `preventDefault()` so the button is the single predictable entry point), re-fires it on click, shows a success toast on accept, and clears the captured prompt afterwards (a prompt can only be used once). It renders nothing when there is no pending prompt — already installed, unsupported browser, or iOS Safari (no programmatic install) — so it never shows a dead button. Added to both the expanded and compact sidebar-footer rows in `Layout.tsx`, next to the GitHub link. New `nav.installApp` / `nav.installAppSuccess` i18n keys with real translations in all 9 locales (en/de/es/fr/it/ja/pt-BR/zh-CN/zh-TW). **(2) Inter font loaded from the Google Fonts CDN.** `frontend/src/index.css` pulled Inter via `@import url('https://fonts.googleapis.com/css2?...')`. For a local-first, offline-capable PWA this is wrong: it leaks a request to Google on every load, breaks the UI font when offline, and — as the reporter's trace showed — triggered CSP console errors (`connect-src` doesn't allow `fonts.googleapis.com`). The service worker made it worse: a request to `fonts.googleapis.com/css2` has path `/css2` (no `.css` extension), so it missed the CSS branch, fell through to the catch-all HTML branch, and on failure was answered with the cached `index.html` — which is why the font request came back as `text/html`. **Fix**: the two Inter variable woff2 files (latin + latin-ext, one file covers every weight via the variable axis) are now bundled in `frontend/public/fonts/` and declared with `@font-face` in `index.css`, served same-origin. The service worker now (a) skips all cross-origin requests entirely — letting the browser handle them so a failed cross-origin fetch can never be answered with `index.html` again — (b) caches the font files in `STATIC_ASSETS` and via a `.woff2` / `/fonts/` match in the cache-first branch so the UI renders offline, and (c) bumps its cache version. With Inter self-hosted, `fonts.googleapis.com` and `fonts.gstatic.com` were dropped from the SPA and gcode-viewer CSP directives in `backend/app/main.py` (the `/docs` ReDoc/Swagger CSP keeps them — that third-party UI genuinely loads Google Fonts). Frontend build clean, i18n parity green across 9 locales, backend ruff clean, 17 security-header tests green.
- **Flow Calibration now actually runs when the print option is enabled (#1478, reported by @andreirusu99)** — Reporter on an H2S saw poor extrusion around corners (classic too-high K factor); the printer's flow-dynamics calibration step never appeared in the pre-print checklist even with **Flow Calibration** toggled on in the Re-print dialog, while the same 3MF printed from Bambu Studio did calibrate. **Root causes, both in the `project_file` command built by `start_print` (`backend/app/services/bambu_mqtt.py`)**: (1) `extrude_cali_flag` was hardcoded to `0`. A BambuStudio request-topic capture from a real H2D (plus X1C and P2S captures) shows BambuStudio always sends `1` (run flow-dynamics calibration) or `2` (skip, reuse the stored PA value), paired with `flow_cali`, and **never** `0` — so the printer skipped calibration regardless of the toggle. (2) An earlier revision integer-encoded the calibration/leveling fields (`timelapse`, `bed_leveling`, `flow_cali`, `vibration_cali`, `layer_inspect`) for the H2 family (H2D/H2S/H2C/X2D) on the belief that H2 firmware required `0/1`; the same H2D capture disproves this — BambuStudio sends plain JSON booleans for every model. The "integer required" claim conflated these fields with `use_ams`, which genuinely must stay boolean (H2D Pro reads an integer `use_ams` as a nozzle index — the actual #1386 cause). **Fix**: `extrude_cali_flag` is now `1 if flow_cali else 2`, and the five calibration/leveling fields are sent as JSON booleans for all models, matching BambuStudio's wire format exactly. The H-family integer-conversion branch (`is_h_family`) is removed. `use_ams` is unchanged. This affects only the outbound print command; the virtual-printer inbound coercion of slicer integer `0/1` flags (#1403) is a separate path and untouched. **Tests**: in `test_bambu_mqtt.py`, the two tests that asserted the integer format (`test_x2d_uses_integer_format_for_calibration_fields`, `test_h2s_keeps_integer_format_for_calibration_fields`) are corrected to assert booleans and renamed; all three model tests (X2D/H2S/P2S) now also assert `extrude_cali_flag` is `1` when flow cali is on and `2` when off. 381 mqtt + virtual-printer tests green; backend ruff clean.

- **OpenSpoolman-tagged spools are now selectable in the AMS-slot assignment picker (#1122, reported by @mithkr)** — Reporter runs Bambuddy alongside OpenSpoolman. OpenSpoolman writes a generated NFC tag value into the Spoolman `spool.extra.tag` field; any spool it had tagged then never appeared in Bambuddy's "Select a spool" picker (`LinkSpoolModal`), so a spool that was *physically* unassigned could not be linked to an AMS tray. **Root cause**: `GET /spoolman/spools/unlinked` (`backend/app/api/routes/spoolman.py`) classified a spool as "linked, hide it" purely on *presence of a non-empty `extra.tag`*. That was a stale proxy. `extra.tag` is only an RFID/NFC *matching key* — both Bambuddy and OpenSpoolman write a tag identifier there, for the same purpose — and its presence says nothing about whether the spool occupies an AMS slot. Bambuddy already has a dedicated ledger for that: the `spoolman_slot_assignments` table, which `models/spoolman_slot_assignment.py` itself documents as "the source of truth for Spoolman slot assignments". **Fix**: `get_unlinked_spools` now decides assignability from that ledger — a spool is assignable iff its id is **not** in `spoolman_slot_assignments` — and ignores `extra.tag` entirely. Verified the ledger is complete: both `link_spool` (manual link) and the AMS auto-sync (`spoolman.py` slot-change persistence) upsert a row for every occupied slot, so nothing genuinely assigned can leak back into the picker. `get_linked_spools` and `find_spool_by_tag` keep using `extra.tag` unchanged — those are genuine tag-match maps and are unaffected. Internal-inventory mode needs no parallel change: it stores tags in its own DB with no Spoolman `extra` collision, so the OpenSpoolman conflict cannot occur there. Visible behavior change: a spool Bambuddy linked but whose slot assignment was later cleared now re-appears as assignable — correct, since it is genuinely re-linkable. **Tests**: `test_spoolman_api.py` — `test_get_unlinked_spools_success` now asserts a spool with a non-empty OpenSpoolman-style `extra.tag` but no slot row still appears in the picker; new `test_get_unlinked_spools_excludes_slot_assigned` seeds a `SpoolmanSlotAssignment` row and asserts that spool is excluded while a tagged-but-unassigned spool is included. 50 spoolman-API integration tests green; backend ruff clean.

- **Missing-spool-assignment notification no longer false-fires on every Spoolman-mode print (#1473, reported and root-caused by @ojimpo)** — Reporter on Spoolman mode (AMS 2 Pro, all four trays bound to Spoolman spools via the Assign-Spool UI) got a `print_missing_spool_assignment` notification on every print start — 13 false positives in 7 days — each flagging trays that were correctly bound. He traced it precisely: `backend/app/services/spool_assignment_notifications.py` queried only the legacy `SpoolAssignment` table, never `SpoolmanSlotAssignment`. In Spoolman mode the legacy table is empty (bindings live in `spoolman_slot_assignments`, the source-of-truth since #1119), so `assigned_global_trays` came back empty and every used tray was reported missing. Same class of miss as #1459 (the weight tracker also skipped `SpoolmanSlotAssignment`) and a [[feedback_inventory_modes_parity]] violation — a check present in both modes was wired only for legacy. **Fix**: the assigned-tray set is now the **union** of both tables — `SpoolAssignment` and `SpoolmanSlotAssignment` rows for the printer. Both expose `printer_id` / `ams_id` / `tray_id` in identical shape (verified against `models/spoolman_slot_assignment.py`, whose `ams_id` range 0-7 / 128-191 / 255 is fully covered by the existing `_global_tray_from_assignment()`), so the helper works on either unchanged. The union is strictly safe: it can only *add* assignments, so it never regresses legacy-mode behavior and never reports a genuinely-unassigned tray as covered. Scope note: this does not add RFID-`extra.tag` resolution (a tray bound purely via the loaded spool's RFID tag with no slot-assignment row) — that needs the Spoolman client and is a deeper change; the reported false positive is entirely covered by the union since the Assign-Spool UI writes `SpoolmanSlotAssignment`. **Tests**: 3 new in `test_spool_assignment_notifications.py` (the reporter's suggested cases) — Spoolman-only binding suppresses the notification; Spoolman partial coverage flags only the uncovered tray; mixed-mode (A1 legacy + A2 Spoolman) union covers all used trays. The test fake now routes `execute()` by target table so either mode can be exercised; the existing legacy-mode test still passes unchanged. 4 notification tests green; backend ruff clean. **Audit follow-up**: a sweep of every `SpoolAssignment` consumer confirmed the other internal-mode-only users (`usage_tracker.py`, `spool_tag_matcher.py`, `routes/inventory.py`) are correct — internal and Spoolman modes have parallel implementations by design — but surfaced an asymmetry in `routes/settings.py`: the Spoolman-mode toggle cleared `SpoolAssignment` when switching *on* but never cleared `SpoolmanSlotAssignment` when switching *off*, so stale Spoolman rows lingered. Harmless before, but now that the notification unions both tables those stale rows would wrongly count as "assigned" in internal mode and suppress a legitimate warning. Added the symmetric clear — switching back to internal mode now deletes `SpoolmanSlotAssignment` rows, mirroring the existing on-switch behavior. 1 integration test in `test_spoolman_slot_assignments.py::TestModeSwitchClearsAssignments` covers it; 23 slot-assignment + 45 settings/slot tests green.

- **Local Profiles: the search bar no longer disappears when a query matches nothing (#1470, reported by @pwostran)** — Typing a query in Settings → Local Profiles that matched no preset made the search bar itself vanish, leaving the user unable to clear or edit the query without a full page refresh. Root cause in `frontend/src/components/LocalProfilesView.tsx`: the search bar was gated on `{totalCount > 0 && …}`, and `totalCount` is the sum of the *post-filter* `filaments` / `printers` / `processes` lengths — so the moment the query filtered every column to empty, `totalCount` hit 0 and the search bar unmounted along with the columns. The `totalCount === 0` "No local presets yet" empty state then took over, which also misleadingly implied nothing was imported. **Fix**: added `hasAnyPresets`, computed from the *pre-filter* preset counts (`presets?.filament/printer/process` lengths), and gated the search bar on that instead — it stays mounted as long as any preset exists, regardless of the query. The empty state is now split: `!hasAnyPresets` shows the genuine "No local presets yet" + import hint, while `hasAnyPresets && totalCount === 0` shows a new "No presets match your search" message (with a search icon) so the two cases are no longer conflated. New `noSearchResults` i18n key added with real translations in all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). **Tests**: 1 new in `LocalProfilesView.test.tsx` — types a non-matching query and asserts the search bar is still in the DOM, retains the typed value, and the no-matches message renders. 10 LocalProfilesView tests green; i18n parity 4859 keys × 8 locales; frontend build clean.

- **Failure Detection: the Status panel's Low / High thresholds now reflect the selected sensitivity (#1469, reported by @JohnMacOB)** — Reporter changed the Sensitivity dropdown (Low / Medium / High) in Settings → Failure Detection and the "Low / High thresholds" readout in the Status panel never moved off `0.38 / 0.78`, so the setting looked dead. **Detection itself was always correct** — the classifier at `backend/app/services/obico_detection.py:280` uses `classify(score, settings["sensitivity"])` with the real value, so warnings/failures triggered at the right confidence for the chosen level. The bug was display-only: `ObicoDetectionService.get_status()` computed the displayed thresholds with a hardcoded `thresholds("medium")` (`obico_detection.py:324`), ignoring the configured sensitivity. `thresholds()` is `BASE × SENSITIVITY_MULT` — low ×1.25 → `0.48 / 0.98`, medium ×1.0 → `0.38 / 0.78`, high ×0.75 → `0.29 / 0.59` — so the panel always showed the medium row whatever the user picked, making a working setting look broken. **Fix**: `get_status()` takes an optional `sensitivity` parameter (default `"medium"`, so `thresholds()`'s own unknown-value fallback still applies) and the `/obico/status` route — which already loads settings fresh and has `settings["sensitivity"]` in hand — passes it through. The readout now updates the instant the dropdown change is saved (the frontend already invalidates the `obico-status` query on save), with no wait for the next poll cycle. **Tests**: 1 new in `test_obico_detection.py::TestGetStatus` — `test_thresholds_reflect_configured_sensitivity` asserts low > medium > high for both threshold bounds and that the default / unknown sensitivity falls back to medium. 47 obico unit tests + 5 obico API integration tests green; backend ruff clean.

- **Printer serial numbers are normalized on input, and a stale connection that never receives a status report now logs an actionable hint (#1465, reported by @jmneely94)** — Reporter's H2C connected over MQTT+TLS without error but every status field stayed `unknown` (state, firmware, AMS, wifi); the P1S on the same instance worked. The report concluded the H2C firmware doesn't publish MQTT — but its own evidence disproves that: Bambu Studio LAN mode showed the H2C's live status, and Bambu Studio's device telemetry *is* MQTT `device/<serial>/report` (the "HTTPS API, not MQTT" claim in the report is incorrect — only file transfer/FTP and the camera stream are non-MQTT). A printer visible in Studio is publishing. **Actual cause is layer-8**: connect-OK + subscribe-OK + zero messages forever means Bambuddy subscribed to a topic with no traffic — the MQTT broker *is* the printer, it authenticates on the access code and SUBACKs a subscription to *any* topic string, so a wrong or mis-cased serial connects fine and silently receives nothing. The reporter's own `mosquitto_sub` "verification" subscribed to `device/31b8c…/report` lowercase; MQTT topics are case-sensitive and Bambu serials are uppercase, so that test reproduced the mistake rather than validating the firmware theory. Bambuddy did nothing to guard against it: `schemas/printer.py` took `serial_number` as a bare string, the model stored it verbatim, and `bambu_mqtt.py` built the topic as `f"device/{self.serial_number}/report"` with no `.upper()` / `.strip()`. **Two hardening changes** so this class of mistake self-heals or at least diagnoses itself. **(1) Serial normalization**: a `field_validator` on `PrinterBase.serial_number` now `.strip().upper()`s the value (rejecting blank-after-strip), so a serial pasted in the wrong case or with stray whitespace produces the correctly-cased subscription topic. `PrinterUpdate` has no `serial_number` field so the create path is the only entry point; existing DB rows are not migrated (forward fix — a mis-cased existing printer is corrected by re-adding it). **(2) Zero-report diagnostic**: `BambuMQTTClient` now counts report-topic messages per connection (`_report_messages_since_connect`, reset in `_on_connect`, incremented in `_on_message` when `msg.topic == self.topic_subscribe`). When `check_staleness()` fires its reconnect and that counter is still 0, it logs a one-shot WARNING (`_zero_report_hint_logged` guards against spamming the 60-90s reconnect loop) telling the user the most common cause is a wrong/mis-cased serial and that the report topic is case-sensitive — turning a silent indefinite reconnect loop into something actionable in the log / support bundle. Known gap left intentionally: a printer that connects but sends *literally* zero messages (so `_last_message_time` stays 0) never trips `is_stale()` at all — that grace behavior is #887-sensitive and out of scope here; the diagnostic covers the observed case where staleness does fire. **Tests**: 5 in new `test_printer_schema.py` (uppercase, whitespace-strip, both, already-normalized no-op, blank rejected); 2 in `test_bambu_mqtt.py::TestStaleReconnect` (hint logs once when no reports received then stays silent on the next stale cycle; no hint when reports were received — a normal mid-session quiet gap). 659 printer/MQTT/scheduler tests green across the affected suites; backend ruff clean.

- **Smart-plug "Auto Off after Drying" no longer kills the printer seconds into a drying cycle (#1462, reported by @Kyobinoyo)** — Reporter on an X2D (firmware 01.01.00.00) set a 1-hour AMS dry and a short auto-off-after-drying delay, and the printer powered off almost immediately. The support bundle made it unambiguous: every `Sent drying command … duration=1` was followed 3-9 seconds later by `AMS 0 drying complete (dry_time 60 → 0)` — the drying-complete callback fired seconds after drying *started*, not when it finished, arming smart-plug auto-off against a printer that was still drying (and potentially printing). The reporter's hypothesis was a missing print-state check; the actual cause is a **false completion detection**. **Root cause — partial AMS-update merge drops `dry_time`**: `backend/app/services/bambu_mqtt.py` merges partial AMS MQTT updates. The no-tray branch correctly preserved top-level fields (`{**existing_unit, **ams_unit}`), but the tray-bearing branch rebuilt the unit as `{**ams_unit, "tray": merged_trays}` — spreading only the *new* partial, never `existing_unit`. The printer constantly sends tray-bearing partials that carry no drying fields, so on every such update `dry_time` (and `info`, which drives `dry_status` / `dry_sub_status`) was silently dropped. The drying falling-edge detector then read `int(ams_unit.get("dry_time") or 0)` → field absent → `current = 0`; with `previous` a real countdown value (60, 50, 52 in the reporter's log) the `previous > 0 and current == 0` check fired a false "drying complete". **Fix, two parts.** **(1)** Tray-bearing merge branch now spreads `existing_unit` first — `{**existing_unit, **ams_unit, "tray": merged_trays}` — so `dry_time`, `info`, humidity, temp and any other top-level field a partial omits survive the merge, matching the no-tray branch. This also fixes `dry_status` / `dry_sub_status` flapping in the UI on every tray update (same dropped-field bug, broader symptom). **(2)** Defence-in-depth in the falling-edge detector: it now only evaluates the edge when `dry_time` is *explicitly present* (`ams_unit.get("dry_time")` not None) and parseable — an absent or unparseable value is skipped without touching `_previous_dry_times`, so a missing field can never be read as "drying finished" even if a future merge regression re-introduces a drop. Once detection is correct, `on_drying_complete` only fires at real completion, so the auto-off timer arms when the user expects. **Tests**: 1 new in `test_bambu_mqtt.py::TestDryingCompleteCallback` — `test_tray_only_partial_does_not_fake_completion` pushes `dry_time=60`, then a tray-only partial with no `dry_time`, asserts no event fired AND `state.raw_data["ams"][0]["dry_time"]` still equals 60, then a real `dry_time=0` push fires the edge exactly once. 108 drying/AMS tests + 35 smart-plug-manager tests green; backend ruff clean.

- **Scheduler: queue items with `force_color_match` filament overrides now produce a correct AMS mapping at dispatch (#1437, fixed by external PR #1440 from @Person2099)** — Contributor's own bug report and fix. He had a queue item with `filament_overrides: [{slot_id: 1, type: "PLA", color: "#CBC6B8", force_color_match: true}]` and `ams_mapping: null`, expecting Bambuddy to translate the override into a slot mapping at dispatch time. Instead the scheduler dispatched with `ams_mapping: null` and the P1S fell back to type-only AMS matching, picking the wrong-colour slot. **Two-layer root cause** he traced end-to-end. **(1) `backend/app/services/filament_requirements.py:69`**: `extract_filament_requirements(file_path, plate_id=None)` fell through to `_collect_filaments(root, filaments)` whose XPath `./filament` only matches direct children of `<config>`. Modern BambuStudio 3MFs wrap filaments inside `<plate>` elements, so this XPath returned `[]` on every modern multi-plate 3MF when no specific plate was targeted — which is the standard scheduler call shape for queue items without a pinned plate. The downstream "no AMS mapping" cascade ALL flowed from this empty filament_reqs result. Fix walks `<plate>` elements first, dedupes by `slot_id` (highest `used_grams` wins on ties — sane because BambuStudio slots are project-wide and the entry that extruded the most is the most representative for AMS planning), and preserves the old `./filament` XPath as a fallback when no `<plate>` elements are present, so legacy 3MFs continue to parse unchanged. **(2) `backend/app/services/print_scheduler.py:792` — defence in depth**: even with (1) in place, edge cases exist where `_get_filament_requirements` can still return None (3MF missing `slice_info.config` entirely, IO failure during ZIP extraction, etc). New `_build_override_direct_mapping(force_overrides, status)` helper kicks in at exactly that moment when `force_color_match` overrides are present — builds the requirement list directly from the overrides (`slot_id`, `type`, `color`, empty `tray_info_idx`) and delegates to the existing `_match_filaments_to_slots()` cascade against the printer's loaded AMS state. Wrong-colour slot credit via the cascade's type-only fallback is impossible-by-construction because the upstream `_get_missing_force_color_slots()` printer-eligibility gate at `:590` already requires an exact `(type, normalised colour)` pair to be loaded *before* the printer is even considered for the job, so by the time `_build_override_direct_mapping` runs the exact match is guaranteed in the loaded set and the cascade's `exact_match` branch wins (colour normalisation is identical on both sides — `tray_color.replace("#", "").lower()[:6]`). Pref-only overrides (without `force_color_match`) intentionally do NOT trigger the fallback — they keep the pre-PR "no mapping, printer picks defaults" behaviour, so the new fallback is strictly opt-in via `force_color_match: true`. **Backwards-compat triple-checked**: legacy 3MF format unchanged (preserved fallback path); `plate_id != None` branch untouched (entire fix is inside the `else` of `if plate_id is not None`); `filament_overrides=None` / `[]` / no-force-entries all preserve the existing `return None` path; malformed JSON in `filament_overrides` is caught by the existing try/except, logged, and still returns None. **Tests** (22 new across two files; all pass on `pytest -n 30`): `backend/tests/unit/services/test_filament_requirements.py` — 4 tests covering the `plate_id=None` modern-format path, multi-plate collection, slot-dedup-by-highest-grams, and single-plate-modern-format. `backend/tests/unit/test_scheduler_force_color_ams_fallback.py` — 18 tests across `TestBuildOverrideDirectMapping` (single override matches AMS slot, empty AMS returns None, no colour match still produces a mapping length, multi-override produces multi-element mapping, external spool match yields global_tray_id 254, `tray_info_idx` is cleared) and `TestComputeAmsMappingFallback` (fallback used when reqs empty + force overrides present, fallback NOT used when no force_color flag, fallback NOT used when overrides None, normal path still used when reqs available, printer-status-unavailable returns None gracefully). 5079 backend tests + ruff + frontend build all clean post-merge; #1457/#1459/#1440 verified non-interacting (different services, different code paths, different timings). External-PR-checklist (per [[feedback_pr_changelog_required]]): contributor doesn't add CHANGELOG, this entry added by Martin post-merge.

- **Spoolman: per-print weight reporting now works for tag-less spools assigned via the Bambuddy UI (#1459, reported by @Moskito99 — follow-up to #1119)** — Reporter on Postgres + Postgres-backed Spoolman noticed that prints finished cleanly but the spool's remaining weight in Spoolman was never decremented. He correctly traced it: Spoolman's `extra.tag` on his spool was empty, and writing a value in there by hand made weight tracking start working. **Root cause** is one missing fallback path. After #1119 introduced the local `spoolman_slot_assignments` table as the authoritative binding for tag-less spools (RFID is the binding for Bambu Lab spools, slot-assignment is the binding for generic / non-RFID spools), the Assign UI deliberately leaves Spoolman's `extra.tag` field empty for those spools — and after the #1457 cleanup we now actively *clear* it on re-binding to stop ghost links resurfacing in the hover card. That's the correct write-side behaviour. But the per-print weight tracker (`backend/app/services/spoolman_tracking.py:_report_spool_usage_for_slots`) only resolved the bound spool via `client.find_spool_by_tag(spool_tag)` — a single tag-lookup against Spoolman's `extra.tag`. For tag-less spools that returns None and the tracker silently skipped the slot. The tracker **never consulted the local `spoolman_slot_assignments` table** that has the answer (verified: `grep -n SpoolmanSlotAssignment backend/app/services/spoolman_tracking.py` returned zero hits before this fix). So Bambu Lab RFID users got correct weight reporting (their `extra.tag` is auto-populated by the AMS-sync `create_spool` path at `backend/app/services/spoolman.py:1076`), and generic-spool users on Spoolman saw weight tracking silently no-op — exactly the symptom Moskito99 saw. **Fix** adds a two-stage resolver inside `_report_spool_usage_for_slots`: stage 1 is the existing `client.find_spool_by_tag(spool_tag)` (RFID and any RFID-equivalent `extra.tag` value), stage 2 is the new `_resolve_spool_id_via_slot_assignment(printer_id, ams_id, tray_id)` helper that queries the `SpoolmanSlotAssignment` table for `(printer_id, ams_id, tray_id) → spoolman_spool_id`. The (ams_id, tray_id) pair is derived from the slot's global_tray_id via the existing `_global_tray_id_to_ams_slot` helper — same translation used for fallback-tag generation, so external slots (global 254/255 → ams_id=255, tray_id=0/1) and AMS-HT slots (global 128+ → ams_id=global, tray_id=0) all resolve correctly. Stage-1-wins ordering is deliberate: when an RFID-bound spool is in the slot, `extra.tag` is the authoritative binding, even if the slot-assignment table happens to point at a different spool (legacy state). The resulting `[SPOOLMAN] … via tag` vs `… via slot-assignment` suffix in the success log makes it obvious which path resolved each slot, which support bundles will use to confirm the fix is live. `printer_id` threaded through the three callers (`_report_partial_usage` G-code path, `_report_partial_usage` linear path, `report_usage`) — they all already had `printer_id` in scope. Crucially, **`extra.tag` is NOT auto-populated** by this fix — that would re-introduce exactly the pollution #1457 cleaned up (deterministic fallback tags surviving across spool changes and surfacing stale spools in the hover card). The slot-assignment table is the source of truth for non-RFID bindings; Spoolman's `extra.tag` is reserved for hardware RFID identifiers. **Tests:** 5 new in `backend/tests/integration/test_spoolman_tracking_slot_fallback.py`: the bug repro (tag missing + slot-assignment present → use_spool by the slot-assignment's id); tag-match wins when both present (a regression that flips the resolution order would credit the wrong spool); skip-when-neither (no spool resolution attempted); skip-when-printer_id-not-supplied (legacy call shape stays inert); external-slot translation (global 254 → ams_id=255 tray_id=0 lookup works). New `patch_async_session` fixture routes the tracker's module-level `async_session` to the test engine so the in-test `SpoolmanSlotAssignment` insert is visible to the lookup. **Postgres compatibility:** verified — the lookup uses a plain `select(...where...).scalar_one_or_none()`, no SQLite-only syntax. 642 spoolman/tracking tests + 5 new = 647 green; full backend suite 5065 green; ruff clean.

- **Spoolman: AMS hover card and SpoolBuddy fill-bar no longer surface a stale spool after re-assigning a non-RFID slot (#1457, reported by @Menthe11)** — Reporter on a P1S with generic (non-RFID) PLA saw two different spools rendered in the AMS hover card: the top "Spulen-ID / Im Inventar öffnen" link pointed at an almost-empty black PLA spool that had been in the slot weeks earlier, while the bottom "Zugewiesen" block correctly showed the full spool the user had just assigned via Spoolman. **Root cause is two-layered.** For non-RFID slots Bambuddy falls back to a deterministic per-slot tag (`hash(printer_serial) + ams_id + tray_id`, 16 hex chars; see `frontend/src/utils/amsHelpers.ts:176`). When a user runs Link UI on such a slot, that fallback tag is written to the Spoolman spool's `extra.tag` — and the existing Link / Assign routes never cleared it from the previous holder when the user re-bound the slot to a different spool. The frontend's hover-card resolver at `frontend/src/pages/PrintersPage.tsx:3736` (and the matching sites at `:4137` / `:4452` for HT and external slots) then preferred that stale tag-link over the user's explicit slot-assignment: `linkedSpoolId: (trayTag ? linkedSpools?.[trayTag]?.id : undefined) ?? slotAssignmentForFill?.spoolman_spool_id`. So when both layers existed and they disagreed, the *stale* spool won, and FilamentHoverCard's dedupe at line 377 couldn't collapse the two buttons because the IDs didn't match → two "Im Inventar öffnen" buttons pointing at different spools. The SpoolBuddy AMS page had the identical bug shape in two more spots: `getSpoolmanFillForSlot()` (the per-slot fill-percentage resolver, line 138) walked tag-link before slot-assignment, so the fill bar reported the *old* spool's remaining grams instead of the freshly assigned full one; and the slot-action picker's "Linked spool" / "Assigned spool" branches (line 760) showed "Linked spool" whenever a tag-link existed, regardless of whether a (more recent) slot-assignment also existed. **Fix has two parts.** (1) Frontend precedence swap at all five sites: slot-assignment is the user's most explicit, most recent action — it must outrank the tag-link, which is auto-populated and can be silently stale. With the swap, FilamentHoverCard's existing match-dedupe collapses both buttons into one pointing at the correct spool; SpoolBuddy's fill bar reads from the assigned spool's weight first; and SpoolBuddy's slot-action picker drops the stale "Linked spool" line entirely when a slot-assignment exists. (2) Backend hygiene so the stale state is never written in the first place: a new `_clear_stale_tag_links(client, tag, keep_spool_id, log_context)` helper in `backend/app/api/routes/spoolman_inventory.py` enumerates Spoolman spools and PATCHes `extra.tag` to JSON-empty (`'""'`, the same wire shape `unlink_spool` already uses so the read-side `.strip('"')` filter in `get_linked_spools` skips it) on any spool *other than* the one being bound that still claims the same tag. Wired into `POST /spoolman/inventory/slot-assignments` (computes the slot's deterministic fallback tag via the existing `get_fallback_spool_tag_for_slot` helper in `spoolman_tracking.py` — newly promoted to a public symbol that mirrors the frontend's `getFallbackSpoolTag(serial, amsId, trayId)` signature) and `POST /spoolman/spools/{id}/link` (passes the literal `spool_tag` being bound — works for both RFID tags and fallback tags). Both are best-effort: per-spool patch failures and Spoolman enumeration failures are logged and skipped, never raised, so the assign/link path never wedges on a Spoolman hiccup. Existing assign-route tests stay green because their fixtures' Spoolman client mock already had `get_spools` returning `[]` (or now does — fixture updated in `test_spoolman_slot_assignments.py`, `test_spoolman_slot_concurrency.py`, `test_spoolman_slot_assignment_mqtt.py`, and the link-route test fixture in `test_spoolman_api.py`). **Tests** (8 new in `backend/tests/unit/test_spoolman_stale_tag_cleanup.py`): clears one other-spool while keeping the bound spool and unrelated-tag spool intact; case-insensitive match (the helper uppercases both sides because `get_linked_spools` already does); empty-tag short-circuits without enumerating spools; `keep_spool_id` guards against clearing the spool being bound; Spoolman 5xx during enumeration is swallowed and the call returns 0; one per-spool patch failure doesn't abort the rest of the cleanup; the slot-fallback wrapper computes the right tag and clears it; empty serial returns 0 without enumerating. Backend: ruff clean, 581 spoolman tests + 8 new = 589 green. Frontend build clean.

- **AMS drying popover no longer renders off the bottom of the viewport + diagnostic logging for the silent-drying-ignore bug (#1447, reported by @kleinweby)** — Two distinct bugs in the same report, both shipped in this PR. **(1) Popover positioning**: reporter on P1S + AMS-HT couldn't see the Start button on the drying popover and worked around it via DevTools to confirm the popover was actually there, just clipped below the fold. Root cause in `frontend/src/pages/PrintersPage.tsx:3498 / :4011` (two identical sites — one for the compact AMS row, one for the dual-nozzle layout): the flame-icon onClick computed popover position as a fixed `{ top: rect.bottom + 4, left: Math.max(8, rect.right - 240) }` with no viewport-overflow check. The flame icon sits at the bottom of the AMS info section on the printer card, so on most realistic viewports `rect.bottom + 4 + popover_height(~320px) > viewport.height` and the popover rendered partially or entirely off-screen. Fix extracts a `computePopoverPosition()` helper in `frontend/src/utils/popoverPosition.ts` that defaults to placing the popover below + right-aligned to the trigger (preserving the original visual layout), flips ABOVE the trigger when below would overflow AND above would fit, stays below in the degraded case where neither fits (popover taller than viewport — at least the top is visible and the user can scroll inside), and clamps the left coordinate so a trigger near either viewport edge can't push the popover off-screen horizontally either. Both PrintersPage callsites now go through the helper. **(2) Diagnostic logging for the silent-drying-ignore**: reporter's support bundle showed the printer receives every `ams_filament_drying` command (multiple start / stop attempts on `ams_id=128`, P1S 01.10.00.00 firmware), the printer ACKs each one, but the AMS info field never changes — drying neither starts nor stops on Bambuddy's request, while pressing Start on the printer's touchscreen worked immediately (so the hardware path is healthy and the LAN MQTT channel is delivering). The Bambuddy command JSON matches the format documented as working on H2D, all required fields are present, types match BambuStudio. Diagnosing the silent rejection needs the printer's actual response payload — whether `result: "fail"` and the specific `reason` code — but `bambu_mqtt.py:918` was only logging the response *command name*, not the body. The existing `extrusion_cali_*` / `ams_filament_setting` debug path at `:919-920` was the template; this PR extends it to `ams_filament_drying` at **INFO level** specifically (not DEBUG like its siblings) because drying responses are rare — user-initiated only — and INFO ensures the body lands in support bundles by default without needing the user to bump log level first. Paired with a matching outgoing-side INFO log inside `send_drying_command` that captures the full wire JSON, so the next support bundle has **both halves of the conversation**. The actual command-side fix can't happen without that data (no guessing — flipping `close_power_conflict: true` or otherwise mutating a field that matches the documented-working H2D shape could break currently-working installs). When kleinweby retries on this build and re-attaches a bundle, the rejection reason is visible and the command-side fix follows from real data. **Tests** (8 new in `__tests__/utils/popoverPosition.test.ts`): below-has-room places below; right-align to trigger; below overflows flips above; degraded case stays below; clamps right-edge and left-edge triggers; respects custom margin and gap. 276 backend service tests + frontend build clean.

- **Stats: Print Activity heatmap buckets prints by local date, not UTC date (#1446, reported and root-caused by @needo37)** — Reporter on CDT (UTC-5) noticed that prints finished in the local evening were jumping to "tomorrow's" cell on the GitHub-style contribution heatmap on the Stats page. He went through `frontend/src/components/PrintCalendar.tsx` and identified the root cause: line 30 split the raw ISO string on `'T'` to get a YYYY-MM-DD key, which always returns the **UTC** date — but the cell tooltip (line 161) rendered via `toLocaleDateString()`, which is **local-tz aware**. Same data, two renderers, only one was tz-correct. He confirmed with DB query: rows 29 and 30 stored as `2026-05-18 ... UTC` were both local `May 17` (20:46 CDT and 22:39 CDT), and the Archives → Print Log view formatted them correctly as May 17 via `toLocaleString()` while the heatmap split them onto May 18 via the raw-ISO shortcut. The component had two more instances of the same shape that I caught while applying the fix: line 152 built the per-cell lookup key via `day.toISOString().split('T')[0]` (the `day` Date objects produced by the calendar-generation loop are local-tz constructed via `new Date()` + `setDate`, so `toISOString()` shifted them back to UTC before the lookup — would have re-broken the join even after the bucketing fix), and line 154's "today" highlight comparison used `new Date().toISOString().split('T')[0]` too (so at e.g. 23:00 CDT the heatmap would have ringed UTC-tomorrow's cell instead of local-today's). **Fix** adds a `localDateKey(input: string | Date): string` helper in `frontend/src/utils/date.ts` that wraps `parseUTCDate()` and formats via the local-tz getters (`getFullYear` / `getMonth` / `getDate` with two-digit padding), returning a stable comparable YYYY-MM-DD string. PrintCalendar.tsx uses it in all three spots — bucket key for input ISO strings, grid-cell lookup key, and "today" highlight — so the bucketing, the cell join, and the today ring all live on the same local-tz axis as the user's tooltip label. Backend stays UTC (`PrintLogEntry.created_at` unchanged); bucketing is a presentation concern and the browser already knows the user's tz. The reporter's broader point ("same fix needed anywhere else the frontend buckets timestamps to days") still has stragglers — `StatsPage.tsx:55-84` (computeDateRange) builds the dateFrom/dateTo strings for backend stats queries using `getUTC*` getters everywhere, so a "this week" picked at 23:00 local on Sunday in CDT sends UTC-Monday-based ranges to the backend; that's a separate, deeper bug because it also requires the backend to filter on a tz-shifted UTC range, and Bambuddy has no user-tz setting model today. Punted with a `localDateKey` helper available for reuse when that work lands. **Tests** (5 new in `__tests__/utils/date.test.ts`): keys a local-evening Date to its local date (the bug repro), reproduces the reporter's row-30 case (a moment whose UTC date is "tomorrow" keys to local "today"), pads single-digit month/day, handles null / undefined / empty defensively, and accepts both Date and ISO-string inputs end-to-end via `parseUTCDate`. 74 date-util tests green; frontend build clean. Tests are written tz-independently — they construct `new Date(2026, 4, 17, 22, 0, 0)` via the local-time constructor form so they assert correctly regardless of which tz the CI runner happens to be in.

- **Printers: Add Printer no longer hangs the container on P1S (#1445, reported by @psybernoid and confirmed by @thomassjogren)** — Regression introduced in 0.2.4.2 by the `fix(printers): refuse to add a printer when the MQTT probe fails` change (b51598ea). That commit added a pre-insert MQTT probe to `POST /printers/` via `printer_manager.test_connection()` to catch mistyped access codes before persisting an empty card — but the probe had two compounding bugs that bit P1S specifically. First, a fixed `await asyncio.sleep(2)` checked `state.connected` exactly once at t=2s: P1S firmware's broker / TLS handshake routinely needs 3–5s to surface a CONNACK on a cold MQTT session (same firmware family that already has the documented "broker stops publishing but TCP stays alive" quirk at `bambu_mqtt.py:3181`), so the probe falsely rejected a printer that would have connected fine. Second, the `finally: client.disconnect()` call ran synchronously on the asyncio thread — `BambuMQTTClient.disconnect()` ends in paho's `loop_stop()` which `join()`s the network thread, and if that thread was still mid-TLS-handshake to the slow P1S socket when teardown ran, the `join()` blocked the asyncio thread for as long as the handshake took to either complete or fail. POST `/printers/` therefore wedged, all other HTTP requests queued behind it, and Docker healthcheck timed out → user-visible symptom: "the container hangs." Reporter's workaround (downgrade to 0.2.4.1, add P1S, upgrade back) worked because 0.2.4.1's create-printer route skipped the probe entirely, so the row persisted immediately and the slow handshake happened on a fire-and-forget `connect_printer()` in the background. **Fix** swaps the fixed-sleep + sync-disconnect pair for a polling loop with an 8s budget (`PROBE_TIMEOUT_SECONDS`, configurable as class attributes for tests) that early-returns the moment `state.connected` flips True — so happy-path connects still finish in ~1–2s and slow brokers get the headroom they need — and moves `client.disconnect()` to `await asyncio.to_thread(client.disconnect)` so paho's thread-join can never block the event loop. The new `connect_printer` from-existing-row flow that runs after a successful probe is unchanged (still fire-and-forget). The empty-card-report-prevention goal of the original probe stays intact: a genuinely wrong access code still results in `connected=False` after 8s of polling, the 400 with `code=printer_connection_failed` still fires, the row is still never persisted. **Tests** (2 new in `test_printer_manager.py`): `test_test_connection_polls_and_returns_early_on_connect` simulates the P1S timing — `connected=False` at probe start, flips True ~500ms in — and asserts the probe early-returns in under 1.5s with `success=True` (a regression that reverts to the fixed sleep fails this immediately); `test_test_connection_disconnect_runs_off_loop` mocks a deliberately-slow blocking disconnect (mirrors paho's `loop_stop()` join semantics) and asserts (a) `disconnect` ran on a thread other than the asyncio thread, and (b) a concurrent heartbeat coroutine kept ticking while disconnect was blocking the worker thread, proving the event loop wasn't stalled. The existing `test_test_connection_failure` test was patched to override `PROBE_TIMEOUT_SECONDS` to 0.4s so the negative path still runs fast under CI. 6 printer-create integration tests still green; ruff clean.

- **Stats: Failure Analysis widget no longer shows "Unknown" for archives classified after the fact (#1444, reported and root-caused by @needo37)** — Reporter spotted that the Stats page "Top Failure Reasons" widget grouped failed prints as `Unknown` even after they'd been classified via the Edit Archive modal. He went through the data layer and identified the desync: two `failure_reason` columns exist — `print_archives.failure_reason` written by `PATCH /archives/{id}` and `print_log_entries.failure_reason` read by the widget (`backend/app/services/failure_analysis.py:88`). `PrintLogEntry.failure_reason` gets captured exactly once at print-completion time (`backend/app/main.py:3641`) by copying `archive.failure_reason` — and at that moment the archive value is still `NULL` because the user hasn't picked a reason yet. The Edit Archive modal's PATCH route then writes only to `print_archives` via a generic `setattr` loop, never touching the log entry → widget stays stuck on `Unknown` forever. The reporter confirmed the desync at the DB level (`archive.failure_reason = 'Adhesion failure'`, `print_log_entry.failure_reason = NULL`). Fix mirrors `failure_reason` and `status` from the PATCH payload to the most recent `PrintLogEntry` for that archive (highest `id`). Latest-only because `archive.failure_reason` / `status` already reflect the *latest* run's outcome (each reprint clears the archive's reason at `main.py:2195` and rewrites it at completion), so the Edit Archive modal is implicitly showing — and editing — the latest run; reprints of an archive that succeeded on the second attempt keep the original failed run's classification intact. Scoped to those two fields only — `cost`, `print_name`, `printer_id` etc are deliberately *not* mirrored because per-run values legitimately diverge from archive-level ones (e.g. partial-print cost on a failed run differs from the source archive's full-print cost, see `_compute_run_filament_grams` at `main.py:596`). **Tests** (3 new in `test_archives_api.py`): the bug repro (failure_reason mirrors), the status case (the second field the reporter flagged), and the reprint guard (only the latest of multiple entries gets touched, an earlier entry keeps its prior reason). 55 archives-API tests green; ruff clean.

- **SpoolBuddy: spool ID surfaced everywhere a spool's identity is rendered + Write-Tag page honours Spoolman mode (#1439, reported + partially prototyped by @flom89)** — Reporter buys filament in bulk and registers every individual spool in Spoolman at intake time (each gets a unique ID + a printed barcode that goes onto the physical roll when it's unboxed). When linking an NFC tag to one of those rolls in SpoolBuddy, the picker showed only material + colour + brand — so for ten identical "Black PLA" rolls every row looked the same. The user had no way to tell which physical spool they were about to bind the tag to; the original #1385 fix had surfaced the ID in Bambuddy's main UI (SpoolFormModal, FilamentHoverCard, the inventory-mode LinkSpoolModal) but the parallel SpoolBuddy components had been missed — they ship as part of the Bambuddy frontend repo under `frontend/src/components/spoolbuddy/` and `frontend/src/pages/spoolbuddy/`, not as a separate codebase. **Part 1 — ID surface, seven spots**: `#<id>` in muted small monospace added to `LinkSpoolModal.tsx` (the link-tag-to-spool picker — the reporter's primary use case), `SpoolBuddyWriteTagPage.tsx` (write-tag picker — reporter's second screenshot), `AssignToAmsModal.tsx` header (single-spool context but disambiguating IDs help confirm the right roll was picked), `TagDetectedModal.tsx` (defined but unmounted today — kept consistent for future use), `SpoolInfoCard.tsx` (the found-tag panel on the right side of the dashboard — the "main screen" view), `InventorySpoolInfoCard.tsx` (matching inventory variant), and `SpoolBuddyAmsPage.tsx` AMS-slot assigned-spool block. All seven placements mirror the #1385 pattern (`#<id>` with `shrink-0` so truncation never hides the ID). Frontend-only — the ID was already on the Spool / InventorySpool API shape (`spool.id`); these seven files just weren't surfacing it. **Part 2 — Spoolman-mode parity on the Write-Tag page**: reporter then surfaced that the same page hardcoded `api.getSpools(false)` regardless of inventory backend — so users in Spoolman mode (whose authoritative inventory is at Spoolman, not the internal table) saw spools they never created, and a successful tag write would bind the NFC tag to the wrong backend (the backend `/spoolbuddy/nfc/write-tag` route is mode-aware via `_get_spoolman_client_or_none`, but the frontend was driving it with internal-mode IDs that don't exist on the Spoolman side). Fix follows the wrapper pattern InventoryPage uses (`InventoryPageRouter` at `:445`): page detects `spoolmanMode` from a `getSpoolmanSettings` query at the top and threads it through, with `enabled: spoolmanModeReady` gating the spool fetch until settings load so we don't burn a wrong-backend request during the initial render. Every API call in the page now branches on `spoolmanMode` — 6 sites: the main spool list, the NewSpoolTouchForm's autocomplete spool list, the untag flow (`linkTagToSpool` vs `linkTagToSpoolmanSpool` — the Spoolman variant doesn't accept `data_origin` since Spoolman manages that), the K-profile save (`saveSpoolKProfiles` vs `saveSpoolmanKProfiles`), single-spool create (`createSpool` vs `createSpoolmanInventorySpool`), and bulk create (`bulkCreateSpools` vs `bulkCreateSpoolmanInventorySpools` — the Spoolman variant returns a `SpoolmanBulkCreateResult` envelope vs raw array, handled with a duck-typed `'created' in result` check that mirrors `SpoolFormModal`'s existing pattern). Same shape rule as [[feedback_sqlite_and_postgres_upfront]] / [[feedback_inventory_modes_parity]]: both modes ship in the same drop, no `spoolmanMode ? undefined : ...` UI gates. **Tests**: 3 new in `SpoolBuddyWriteTagPage.test.tsx` — the ID-visibility regression with two identical PLA-Red rolls IDs 42 / 43 (a future refactor that drops the ID span breaks it), plus two parity regressions (`reads from internal inventory when Spoolman mode is OFF` and `reads from Spoolman when Spoolman mode is ON` — the latter asserts `getSpools` is NOT called when the user is in Spoolman mode, so re-hardcoding the internal endpoint breaks CI immediately). 11 WriteTagPage tests + 51 other SpoolBuddy component tests green (62 total); frontend build clean.

- **FTP: P2S upload truncates / 426 "Failure reading network stream" on Python 3.13 (#1401, reported and root-caused by @iitazz)** — Reporter on a P2S running firmware 01.02.00.00 saw every Bambuddy-initiated print fail with the printer's on-screen "unable to parse 3mf file" error ~30 s in; downloading the file back off the printer's SD card confirmed it was truncated at exactly 7 × 64 KB (clean chunk-boundary cut). Initial #1417 follow-up tightened our 426 handling so we'd surface upload failures instead of silently dispatching a print of a partial 3MF — but that only stopped Bambuddy from hiding the problem; the actual upload still failed. The reporter then dug into it with Gemini and identified the real cause: Python 3.13's default `ssl.create_default_context()` negotiates TLS 1.3 when both peers support it, but the printer's vsFTPd build implements session reuse on the FTPS data channel against an old OpenSSL that doesn't tolerate TLS 1.3's asynchronous session-ticket model. The control-channel handshake completes, the data channel tries to resume the session, the resumption races, the data channel gets torn down mid-stream — first ~448 KB of bytes already in the TCP buffer land on the SD card, the rest never make it, printer's vsFTPd replies 426 instead of 226. **Fix** caps the SSL context's `maximum_version` to TLS 1.2 so session resumption is synchronous and the upload completes normally. Implementation follows the pattern just established by `camera_profiles.py` in the #1395 follow-up: a new `backend/app/services/ftp_profiles.py` module with an `FTPProfile` frozen dataclass (one field today, `cap_tls_v1_2: bool = False`) and a per-model registry. Default profile keeps the historical TLS-1.3 negotiation; P2S (display name + internal SSDP code N7) overrides with `cap_tls_v1_2=True`. `ImplicitFTP_TLS.__init__` gains a matching `cap_tls_v1_2` kwarg; `BambuFTPClient.connect()` looks up the profile and threads the flag through. **Deliberately scoped to P2S only** — X1C / P1S / H2D installs that work today stay on the negotiated TLS 1.3; flipping a future model to the capped path is a one-line entry in `_PROFILES` when a new reporter surfaces the same symptom. Considered but rejected the reporter's second proposed change (revert manual `transfercmd` + `sendall` back to `storbinary`) — the stated rationale ("raw sendall breaks OpenSSL 3.x framing") is incorrect (CPython's `storbinary` itself uses `sendall` internally; the actual socket-level behaviour is identical), the move to manual `transfercmd` was deliberate to dodge A1 hanging in `storbinary`'s synchronous `voidresp()`, and the #1417 SIZE-check escape for the "data is intact on the SD card despite the 426" race lives in the manual-transfer path — a switch to `storbinary` would lose that protection. **Tests**: 9 new in `test_ftp_profiles.py` (default profile doesn't cap; unknown / empty model falls back; P2S display name and N7 SSDP code both resolve to capped; lookup is case-insensitive; X1C / H2D / P1S / A1 stay uncapped; dataclass is frozen; **integration test pins the wiring** — `ImplicitFTP_TLS(cap_tls_v1_2=True)` actually sets `ssl_context.maximum_version == TLSVersion.TLSv1_2`, guards against a future refactor that drops the profile→context wiring while keeping the registry looking correct). 87 existing `test_bambu_ftp.py` tests still green; ruff clean.

- **Library 3D preview: complex multi-part 3MFs no longer freeze the page (#1412, reported by @anthonyma94)** — Reporter opened the 3D preview on a multi-color parted MakerWorld statue ("Mecha Mewtwo No AMS Multi Color Parted Statue") and the whole Bambuddy UI locked up — modal close button unresponsive, had to kill the tab. Root cause was in `frontend/src/components/ModelViewer.tsx`: the 3MF parse runs entirely on the browser main thread (JSZip extract + DOMParser + `getElementsByTagName('vertex')` / `('triangle')` iteration + `mergeGeometries`), with no yield points between iterations. Bambu Studio's external-component shape (`<component p:path="..."/>` per part) compounds this — each component triggers another async file extract + DOM parse + vertex/triangle loop, all chained without surrendering control to the event loop between phases. For trivial models (the towel hook and Bambu scraper the reporter cited as working) the total wall-clock is short enough that the freeze isn't visible; for parted statues with dozens of components and high-poly meshes, the main thread is pegged for tens of seconds → browser shows "page unresponsive" and the close button can't fire. **Stopgap that shipped here** adds explicit `nextTick()` yields (`await new Promise(r => setTimeout(r, 0))`) at four hot spots: every 20 000 vertex iterations, every 20 000 triangle iterations, once per top-level `<object>` iteration, and once per `<component>` iteration. Parse wall-clock is unchanged — these yields don't make parsing faster, they just surrender the main thread back to the browser between batches so the modal can be closed, the page can scroll, and the loading spinner can actually render. Constants live next to the helper at the top of the file with a comment justifying the picked period (~5–10 ms of work per batch — fine-grained enough to keep frames flowing, coarse enough not to drown the loop in setTimeout dispatch overhead). The proper fix for this — moving 3MF parse + geometry build into a Web Worker so the main thread is never touched at all — is a tracked follow-up; this stopgap unblocks Anthony's reproduction case today without the worker refactor risk. The earlier close as `invalid` was a misdiagnosis (initial reading was that 3D preview only works on sliced files, which the reporter correctly disproved with a separate MakerWorld URL); reopened, fixed, lesson noted. **Tests:** 21 existing `ModelViewerModal.test.tsx` tests stay green — the yields are in `parseMeshFromDoc` and `parse3MF` which the tests mock around, and the `nextTick` helper has no observable side effects beyond timing. Frontend build clean.

- **Archives: timelapse auto-attach now works for VP-queue / dispatch prints (#1403 follow-up, reported by @pwostran)** — Bambuddy uses a snapshot-diff strategy to pick the right MP4 off the printer's SD card after a print (Bambu printers in LAN-only mode don't sync NTP, so file mtimes are unreliable — `_scan_for_timelapse_with_retries` snapshots existing video filenames at print start and looks for any NEW filename at completion). The baseline-capture call was inline at the bottom of `on_print_start`'s **new-archive branch only** — the **expected-archive branch** (which queue / VP-dispatched / reprinted jobs take, anything registered via `register_expected_print`) exited at its own `return` without ever snapshotting. So queue prints had `_timelapse_baselines[printer_id]` unset; the completion-time scan fell into its "take baseline now" fallback that snapshots the SD card *after* the new MP4 has already landed → the new file sits in the "baseline" set → no diff ever matches → auto-attach silently does nothing. The reporter's `bambuddy-support-20260518-185935.zip` shows the failure verbatim: `Using expected archive 3 for print (skipping duplicate)` at `18:41:10`, `Timelapse was active during print, scheduling auto-scan for archive 3` at `18:58:55`, and `[TIMELAPSE] Archive 3 has no printer, aborting` (a separate bug already fixed by the printer_id-assignment commit in this same train) — and `grep -i baseline` across both his bundles returns zero hits, confirming the snapshot never ran. Fix extracts the inline baseline-capture into `_capture_timelapse_baseline_at_start(printer, printer_id, logger)` and calls it from BOTH branches of `on_print_start` (mirroring the existing site in the new-archive branch with a matching call just before the expected-archive branch's `return`). Helper is best-effort with a `try / except Exception` wrapping `_list_timelapse_videos`, so a transient FTP failure at print-start logs `[TIMELAPSE] Failed to capture baseline at print start: …` and the print proceeds — the completion-time fallback still kicks in (with its known limitation), behaviour matching what the new-archive branch had all along. **Tests:** new `test_expected_archive_path_captures_timelapse_baseline` in the existing `test_print_start_assigns_printer_id_to_vp_archive.py` patches `_list_timelapse_videos` to return two pre-existing videos, runs `on_print_start` through the expected-archive branch, and asserts `_timelapse_baselines[1] == {"earlier_print_a.mp4", "earlier_print_b.mp4"}` — a future refactor that removes the call from one of the branches now fails CI. The existing 2 regressions (`test_expected_archive_path_assigns_printer_id_when_unset`, `test_expected_archive_path_preserves_existing_printer_id`) plus 50 adjacent expected-archive / layer-timelapse / archive-filtering tests still green. The fixture clearing `_expected_prints` etc also clears `_timelapse_baselines` now so test isolation holds.

## [0.2.4.2] - 2026-05-19

### Added
- **Docker: opt-in system trust store for self-signed CA certificates (#1431, contributed by @WizBangCrash, requested in #1289)** — Reporter runs a private LAN with self-signed certificates for internal HTTPS endpoints (his Home Assistant instance being the canonical case) and wanted Bambuddy to trust those CAs without disabling TLS verification end-to-end. Bambuddy talks to Home Assistant via `httpx.AsyncClient` (`backend/app/services/homeassistant.py:46`) with default `verify=True`, which under httpx 0.28 means "use `certifi`'s CA bundle and nothing else" — so manually copying a CA file into the container had no effect. **The fix is opt-in and container-side only**: setting `USE_SYSTEM_TRUST_STORE=<any non-empty value>` in the compose `environment:` block, combined with mounting the user's CA file(s) into `/usr/local/share/ca-certificates`, makes the entrypoint run `update-ca-certificates --fresh` at startup and `export SSL_CERT_DIR=/etc/ssl/certs`. httpx 0.28 explicitly honours that env var (`_config.py`: `ssl.create_default_context(capath=os.environ["SSL_CERT_DIR"])`), and `update-ca-certificates` populates `/etc/ssl/certs` with the **Debian system CA bundle** (Let's Encrypt, DigiCert, GlobalSign, etc.) **plus** the user-mounted CAs — so standard endpoints (api.github.com, MakerWorld, Bambu Cloud) keep working alongside the user's self-signed CA. The `ca-certificates` apt package is added to the Dockerfile so `update-ca-certificates` exists in the image. The feature is **default-off** — when the env var is unset the entrypoint logs a one-line "skipping system trust store update" and goes straight to the existing PUID/PGID chown path, so non-users see zero behaviour change. **Fail-fast on misconfig**: if `USE_SYSTEM_TRUST_STORE` is set but the container is running as non-root (the entrypoint can't write `/etc/ssl/certs` without root), or `/usr/local/share/ca-certificates` has no `.crt` files mounted, or `update-ca-certificates` is missing from the image, or the trust-store rebuild itself fails, the entrypoint exits 1 with a clear error message rather than silently succeeding and leaving the user wondering why their HA connection still rejects the cert. **Compose template update**: `docker-compose.yml` ships commented-out examples for both the volume mount (`/path/to/certs:/usr/local/share/ca-certificates`) and the env var (`USE_SYSTEM_TRUST_STORE=true`) so the path from "I have a self-signed CA" to "Bambuddy trusts it" is two uncommented lines. **Caveat worth flagging in docs**: the feature requires the container to start as root so the entrypoint can run `update-ca-certificates`; users who pin `user: "1000:1000"` in compose get the clear "not running as root" exit with the reason, but they need to switch to the default PUID/PGID-style invocation to use this. Companion wiki PR documents the setup walkthrough at maziggy/bambuddy-wiki#31. Hardware-only path (shell entrypoint change) so no automated test — verified by the reporter's local install. Post-merge polish: the fatal-exit branch's log line was relabeled from "warning: update-ca-certificates failed:" to "error: update-ca-certificates failed" to match severity and the surrounding error messages.

- **Print labels: sort by colour as an alternative to spool-ID order (#1410, requested by @elit3ge)** — Reporter asked for an option to order the printed label sheet by colour instead of spool number so a multi-colour roll of Avery sheets / box labels groups related colours together physically. The label-render backend (`labels.py`) already honoured caller order — both `POST /inventory/labels` and `POST /spoolman/labels` preserve the order of `spool_ids` in the request body and pass it straight to the PDF renderer — so the fix is frontend-only. `LabelTemplatePickerModal` gains a small `sortMode` toggle ("By ID" / "By colour") rendered as a chip pair next to the material-filter row. The "by colour" mode converts each spool's `rgba` to HSL and returns a `[bucket, position]` sort key: chromatic colours (saturation ≥ 0.1) go in bucket 0 ordered by hue 0..360 so the sheet reads as a continuous rainbow; achromatic colours (greys, blacks, whites, plus missing/invalid rgba) go in bucket 1 ordered by lightness so the neutrals trail the rainbow black → white. Multi-colour spools sort on their primary `rgba` — the secondary `extra_colors` stripe still renders on the printed label but doesn't drive the sort, since multi-tone sorting would need a perceptual-distance model the use case doesn't justify. Stable tiebreaker on spool ID keeps identical-colour spools in a deterministic order across renders. The previous `[...selectedIds].sort((a, b) => a - b)` at submit time was forcing every PDF to ID order regardless of any frontend sorting — that's been replaced with `sortedSpools.filter(s => selectedIds.has(s.id)).map(s => s.id)` so the visible order flows through to the wire. Session-only state — toggle resets to "By ID" each time the modal opens, no persisted setting (label printing is a rare action and the user picks what they want every time). i18n: 3 new keys (`inventory.labels.sortBy.{label, id, color}`) translated across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW); parity check holds at 4852 leaves per locale. Tests: two new in `LabelTemplatePickerModal.test.tsx` — one asserts the "By colour" toggle reorders the submit payload to `[Red, Ivory, Blue, Black]` (hue 0° / 33° / 240° then neutral with lightness 0) using the existing 4-spool fixture, the other guards the default "By ID" path so adding the toggle didn't quietly regress users who never click it. 17 modal tests green; frontend build clean.

- **Camera: in-app diagnostic for "Connection lost" (#1395 follow-up)** — Second step of the camera architecture overhaul. When the camera viewer hits its error state, a new **Diagnose** button next to **Retry** runs a staged check against the printer and renders the result inline: which stage failed, how long it took, and a translated remediation hint. Cuts off the "user opens a 'camera broken' ticket → wait days → ask for the support bundle → finally figure out it was their reverse proxy / LAN-only toggle / wrong access code" loop at the user's screen. **Backend** ships `backend/app/services/camera_diagnose.py` (orchestrator) and a new `POST /printers/{id}/camera/diagnose` route in `camera.py`. Stages: (1) `tcp_reachable` — opens a TCP socket to the camera port (322 RTSPS / 6000 chamber image) with a 3-second timeout; distinguishes timeout (`tcp_timeout` → "printer not reachable, check IP/network/power") from refused (`tcp_refused` → "camera port closed, check LAN-only and developer mode") from host-unreachable (`tcp_unreachable` → "printer not reachable"). (2) `first_frame` — captures one JPEG end-to-end via the existing `capture_camera_frame_bytes` pipeline (15-second timeout, same code that powers `/camera/snapshot`); auth, RTSP handshake, and first keyframe collapse into one stage because the user-facing answer is the same regardless of which sub-layer failed. **Live-stream shortcut**: when a viewer is currently watching the printer's camera AND the buffered last-frame timestamp is fresher than 10 seconds, the diagnostic skips the real test and returns `live_stream_active_healthy` — opening a fresh socket would kick the live viewer off on single-camera-connection firmwares (the #1348 reconnect-storm trigger), so we trust the real-world evidence instead. Response includes structured metadata for support triage: `protocol` (rtsp / chamber_image), `port`, `profile` (`default` or the model name with an override — currently only `P2S`), per-stage duration in ms, and the machine-readable summary code. **Frontend** adds `CameraDiagnoseModal.tsx` that fires the API call on mount, renders one row per stage with green-check / red-X / grey-skipped icons, and shows the summary remediation message in a bordered banner styled by overall status. The metadata line at the bottom (protocol / port / profile) lets support triage ask "what does your modal say?" instead of "send the support bundle". A **Run again** button re-runs the diagnostic without dismissing the modal. **EmbeddedCameraViewer** error state grows the Diagnose button (kept "Retry" as the primary action; Diagnose is the escape hatch for users who can't see what's wrong). A small stethoscope icon also lives in the viewer's always-visible control bar between **Refresh** and **Fullscreen**, so pre-flight testing ("did my firmware update break the camera?", "is the camera up before I send a print?") doesn't require waiting for the stream to fail first. Also lifted the previously-hard-coded "Camera unavailable" / "Retry" strings into `camera.unavailable` / `camera.retry` so the error UI is properly translated alongside the new keys. **i18n**: 16 new keys (`unavailable`, `retry`, plus `diagnose.{button,modalTitle,running,runFailed,retry,stage.*,summary.*,meta.*}`) translated across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). German "Diagnose" is a real cognate — added to `IDENTICAL_TO_EN_ALLOWED.de` rather than translated to a synthetic. Parity check holds at 4849 leaves per locale. **Tests**: 11 backend unit tests in `test_camera_diagnose.py` cover the live-stream shortcut (skip when fresh, run when stale), the three TCP failure modes (timeout / refused / OSError) → distinct summary codes, the first-frame stage (no-frame and capture-exception cases), the all-OK path, and the result metadata (P2S → P2S profile / rtsp / 322; A1 → default / chamber_image / 6000; X1C → default / rtsp / 322). 1 backend integration test pins the route's response shape end-to-end. 3 frontend tests in `CameraDiagnoseModal.test.tsx` (mounted → API call, failure → translated remediation, Run again → re-call). 5021 backend tests + 1905 frontend tests green; ruff clean; build clean; i18n parity clean.

### Changed
- **Inventory: AMS Filament Label Holder presets fixed and split into "small" and "large" variants (#1426, reported by @bsaunder)** — Reporter (the same person who originally requested the labels feature in #809) discovered that the `ams_30x15` preset's 30×15 mm dimension didn't fit any documented variant of MakerWorld model 752566, despite the preset advertising itself as designed for it. Two new presets replace it: `ams_holder_74x33` (matches the printable label STL bundled in the project) and `ams_holder_75x55` (fits the cardstock-insert variant the reporter validated as "fits perfectly"). Both land in the roomy-layout branch (swatch + QR + multi-line text with brand / material / hex / spool ID) because the height crosses the 20 mm threshold — so the larger AMS holder labels carry the QR code back to `/inventory?spool=<id>` that the old 30×15 preset couldn't fit. The 30×15 preset is removed entirely; no DB migration needed because the preset name was never persisted (label printing is a one-shot action and the picker defaults to nothing). The legacy tight-layout code path in `_draw_label_tight` is kept as the safety branch for any future ultra-small preset (no shipped template uses it now). **API change**: `POST /inventory/labels` and `POST /spoolman/labels` accept `template` values `ams_holder_74x33` and `ams_holder_75x55` instead of `ams_30x15`. The Literal types in `backend/app/api/routes/labels.py` and `frontend/src/api/client.ts::SpoolLabelTemplate` reject the old value at validation time, so any caller still scripting `ams_30x15` gets a 422 with a clear "valid values" message. i18n: replaced `inventory.labels.templates.ams.{label,hint}` with `inventory.labels.templates.amsHolderSmall.{label,hint}` and `inventory.labels.templates.amsHolderLarge.{label,hint}` — real translations across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW), the English-fallback strings on the old key are gone (`feedback_translate_dont_fallback` rule). Parity check passes at 4856 leaves per locale. Tests: `test_label_renderer.py::ALL_TEMPLATES` updated and the AMS-specific render test pins the small variant; `test_labels.py` integration test covers both new presets end-to-end; `LabelTemplatePickerModal.test.tsx` updated to expect 6 template buttons in the grid (was 5), pin the new `ams_holder_75x55` template value in the API call assertion, and verify both AMS variants are disabled when no spools are selected. 35 affected backend tests + 17 frontend modal tests green; full suite 5035 green; ruff clean; frontend build clean.

### Fixed
- **Archives: "Scan for timelapse" no longer permanently disabled on VP-queue-dispatched prints (#1403 follow-up, reported by @pwostran and @enjoylifenow)** — Reporters dispatched a print from a slicer via the VP print queue, the printer recorded the timelapse to its SD card (visible and downloadable via Bambuddy's file browser), but the archive UI's "Scan for timelapse" and "View Timelapse" actions stayed greyed out forever. Frontend gates both on `archive.printer_id` (`ArchivesPage.tsx:459`); backend `/archives/{id}/timelapse/scan` also 400s when the archive has no `printer_id`. Root cause was in `main.py::on_print_start`'s expected-archive branch: VP-queue archives are created with `printer_id=None` at queue-add time (we don't yet know which printer will run the job — the scheduler decides later for "Any P1S"-style queue items, and even for explicit-printer queue items the archive is created before dispatch). When the print actually starts and `on_print_start` looks up the expected archive via `_expected_prints`, the branch updated `status`, `started_at`, and `subtask_id` but never assigned `printer_id`. So the archive stayed `printer_id=None` for the entire print and forever after — and every downstream UI / API path gated on it (timelapse scan + view, the printer filter on Archives, per-printer stats, success-rate cohort attribution) treated the archive as "unassigned." One-line fix in the expected-archive branch sets `archive.printer_id = printer_id` when they differ, guarded against clobbering an already-correct value so library-file-based queue items (which create their archive with the printer pre-assigned at dispatch time) are unaffected. Two regressions in a new `test_print_start_assigns_printer_id_to_vp_archive.py`: `test_expected_archive_path_assigns_printer_id_when_unset` (VP-queue archive with `printer_id=None` → promoted to the running printer) and `test_expected_archive_path_preserves_existing_printer_id` (library-file archive with `printer_id=7` stays at 7 when the same printer runs it — the branch is idempotent on correct data). The 2 existing `test_layer_timelapse_expected_archive.py` tests + 19 `test_print_start_expected_promotion.py` regressions still green — the expected-archive branch's other side-effects (timelapse session, AMS mapping, status/started_at promotion) are unchanged. 5033 backend tests + ruff clean. **Note about the queue-mode slicer-inheritance path itself**: pwostran's specific complaint that the original #1403 fix "didn't work" was a misdiagnosis on his end — his support bundle proves Bambuddy correctly sent `timelapse: true` to the printer and the printer recorded the video; his actual gap was this archive-attachment bug. The slicer-inheritance branch added in #1403 is a no-op for OrcaSlicer's "Send to print queue" flow because Orca only does the FTP upload and never sends a `project_file` MQTT command at upload time — so the path falls back to `default_*` settings, which is the operative path for that workflow. Users who want a different per-print value still edit the queue item before starting (as pwostran did, which is why his dispatch carried `timelapse: true`).

- **SpoolBuddy: NFC reader works again on Raspberry Pi 5 (#1424, reported by @flom89)** — Reporter on a Pi 5 installed SpoolBuddy successfully but couldn't talk to the PN5180 NFC module (the gauge worked, so SPI hardware and wiring were fine). Manually commenting out `self._spi.no_cs = True` in the daemon restored communication; reporter wasn't sure whether removing it would regress Pi 4 installs. Root cause: Pi 5 uses the new RP1 southbridge and its kernel SPI driver (`spi-rp1`) doesn't accept the `SPI_NO_CS` ioctl the same way the historical Broadcom driver on Pi 4 did — setting `no_cs = True` on Pi 5 either errors out or silently leaves the bus in a state where transfers don't complete. **Safe to drop Pi-wide, not just Pi 5** — SpoolBuddy's PN5180 NSS line is wired to GPIO23 (manual chip-select handled by `_cs_low()` / `_cs_high()` around every transfer, because the kernel's default 5µs setup / 100µs hold timing doesn't meet the PN5180's spec). The hardware CE0 line (GPIO8) is not connected to the reader, so whether the kernel auto-toggles it during `xfer2()` is electrically invisible to the PN5180. The `no_cs = True` call was a "be polite to the bus" gesture that was always cosmetic on this hardware. Fix wraps the assignment in `try / except OSError` in both `spoolbuddy/daemon/pn5180.py` (logs at debug level) and `spoolbuddy/scripts/read_tag.py` (silent — it's a diagnostic script with no logger). Try/except over a hard delete because Pi 4 installs that work today shouldn't see any behaviour change. README updated at `spoolbuddy/README.md:23-28` to drop the "spidev.no_cs = True resolves this" sentence in favour of explaining that manual CS via GPIO23 carries the timing on its own and that Pi 4 + Pi 5 are both supported. Hardware-only path so no automated test — verified by the reporter's bench test that commenting the line out restores reads. Ruff clean.

- **Cover thumbnails: stop hammering FTP and GitHub when a print's 3MF isn't on the printer (#1420, reported by reporter)** — Reporter on a P2S running 0.2.4.1 saw two log-flooding bugs trigger together once they started a print whose 3MF wasn't on the printer's FTP storage (typical SD-card-only print). **(1) Cover endpoint had no negative cache.** `GET /printers/{id}/cover` cached successful 3MF thumbnail downloads in `_cover_cache` keyed by `(subtask_name, view_key)`, but never recorded failures. When all 8 candidate FTP paths returned `550 Failed to open file`, the endpoint raised 404 without remembering that it just tried — and since `cover_url` stays populated on every `PrinterStatus` response while state is RUNNING/PAUSE, every React-Query refetch and every component remount drove the frontend to re-fetch, replaying the same 8-path FTP fan-out roughly every few seconds. On the user's hardware the printer's single FTP socket was so busy with these doomed retries that it surfaced as camera-stream symptoms ("ffmpeg didn't terminate gracefully"). Fix adds a parallel `_cover_404_cache: dict[int, set[tuple[str, str]]]` that records the same `(subtask_name, view_key)` key on every 404 path — both the all-FTP-paths-failed branch and the 3MF-has-no-thumbnail-inside branch. On the next call for the same key, the endpoint short-circuits to 404 before even consulting FTP. The negative cache is cleared in `clear_cover_cache()` alongside the positive cache, which `main.py::on_print_start` already calls — so when the next print starts (different subtask, or same subtask after a re-upload of a new file) Bambuddy retries fresh. **(2) GitHub update-check had no backoff on 403 rate-limit.** Once `api.github.com` returned `403 rate limit exceeded` (typical when multiple Bambuddy instances or other tools share a NAT'd source IP and exhaust the unauthenticated 60-req/hr quota), the next call hit GitHub again immediately. Fix adds module-level `_github_rate_limit_until` epoch-seconds plus three helpers in `updates.py`: `_seconds_until_github_unblocked()`, `_record_github_rate_limit(response)` (reads `X-RateLimit-Reset` from the 403, falls back to a 1-hour pause when the header is absent or unparseable, and only extends the window — never shortens it via an out-of-order response), and `_is_github_rate_limit_response(response)` (status 403/429 with `X-RateLimit-Remaining: 0`, body-text fallback when proxies strip the header). Both call sites — `GET /updates/check` and the in-app updater's `_discover_target_release` — short-circuit when the window is active; the route surfaces a structured `{error: "GitHub rate limit reached...", retry_after_seconds: <int>}` response so the SettingsPage UI can show a real wait time instead of an opaque "failed to check for updates". The "ffmpeg didn't terminate gracefully" warning line the reporter quoted is the standard SIGTERM → 2s wait → SIGKILL pattern in `camera.py::_terminate_ffmpeg` — RTSP/TLS streams routinely take >2s to drain and that warning fires for many users with no FTP issues; once the cover loop is silenced the resource pressure is gone, and the warning itself is cosmetic. **Tests**: `test_cover_negative_cache_skips_repeat_ftp_fanout` in `test_printers_api.py` mocks `download_file_try_paths_async` to return False, calls the endpoint twice, and asserts the second call's FTP mock count is unchanged (the negative cache held); `test_check_backs_off_after_github_rate_limit` in `test_updates_api.py` patches `httpx.AsyncClient` to return a 403 with `X-RateLimit-Reset` set 10 minutes ahead and asserts the second `/updates/check` request never reaches httpx and surfaces `retry_after_seconds > 0`. 134 printers + updates integration tests green; ruff clean.

- **Assign Spool: printer card refreshes immediately, no Force-refresh needed (#1414 follow-up, reported by @snozzlebert)** — After assigning a spool via the modal, the Filament page Location column updated correctly but the Printer card kept showing "Empty slot (External Slot 1)" until the user manually pressed Force-refresh. The MQTT command itself was going through fine; the gap was on the client side. `AssignSpoolModal`'s two `useMutation.onSuccess` callbacks invalidated the inventory / slot-assignment queries (Filament page reads from those — correct) but never invalidated `['printerStatus', printerId]` and never issued a `pushall` to make the printer republish its state. For Bambu RFID-tagged spools the printer echoes the new `tray_type` over MQTT on its own and the websocket push would eventually surface it, but for non-RFID spools and A1 mini external slots (reporter's case) the firmware doesn't volunteer that state change, so the card sat on stale `tray_type: ""` and `getEmptySlotKind()` rendered the "Empty slot" path. Fix adds a `nudgePrinterRepublish()` helper called from both `onSuccess` paths (internal-inventory `assignMutation` and `assignSpoolmanMutation`): calls `api.refreshPrinterStatus(printerId)` to issue the pushall (same call the Force-refresh button uses at `PrintersPage.tsx:1844`) and invalidates `['printerStatus', printerId]` so the refetch lands. Failures from `refreshPrinterStatus` are deliberately swallowed — the assignment itself already succeeded, and if the refresh nudge is offline the next regular poll / websocket update will catch up; we don't want to surface a misleading "assign failed" toast for a stale-cache cleanup that didn't go through. Mirrors the pattern `ConfigureAmsSlotModal` has used since #1235 (line 5346) but with the extra pushall step because assign-spool affects firmware-side state where configure-slot affects only client-side preset mapping. Same fix covers both inventory modes thanks to the shared helper. **Tests:** new `nudges the printer to republish after successful assignment (#1414)` in `AssignSpoolModal.test.tsx` — picks a material-matching spool to bypass the mismatch-confirm dialog, clicks the Polymaker spool card to select it, clicks "Assign Spool", asserts `api.refreshPrinterStatus(7)` was called. `printerId=7` (not the default 1) verifies the helper threads the prop value through correctly rather than hardcoding. The api mock at the top of the file gains `assignSpoolmanSlot`, `getSpoolmanSlotAssignments`, and `refreshPrinterStatus` so the existing 13 tests still pass alongside the new one. 14 modal tests + build clean.

- **FTP: tolerate transient 426 from buggy printer FTP when the file is actually on the SD card (#1417 follow-up, reported by @enjoylifenow)** — In the previous daily build, commit `1fac0276` tightened the post-STOR confirmation handler in `bambu_ftp.py` so that any `ftplib.Error` from `voidresp()` (including `error_temp 426` "Failure reading network stream") would fail the upload outright. The goal was to stop Bambuddy from sending a print command for a truncated 3MF when the printer's FTP server explicitly told us the data stream was cut — exactly the scenario surfacing the user's earlier "unable to parse 3mf file" 30 s into a print. Reporter then confirmed (after running a filesystem check + reformat + power cycle, all clean) that the same install **worked fine on v0.2.4.1** — proving that for the specific P2S firmware revision in question, the 426 is *noise*: the TLS data-channel close races the 226 confirmation, the server reports failure on voidresp, but the file *did* land fully on the SD card. The previous proceed-with-warning behaviour was accidentally correct for that firmware quirk. Reverting wholesale would re-introduce the silent-truncation bug, so instead narrow the rule: when voidresp raises an `ftplib.Error`, immediately follow up with an FTP `SIZE` query against the freshly-uploaded path. If the server-side size matches what Bambuddy just sent, the file is provably intact and Bambuddy proceeds with a warning (`FTP STOR returned error_temp for X but file is intact on the printer (N bytes match) — proceeding`). If the size doesn't match — or `SIZE` itself raises — the transfer was genuinely truncated (or the server is in too broken a state to be trusted) and the upload fails loudly with the error log path the previous round added (`server size=... expected=...`). Same logic is applied to both `upload_file()` and `upload_bytes()` so the legacy A1-compatibility manual-transfer path is covered identically. **Tests:** the two existing regressions from the previous round (`test_upload_426_data_stream_failure_returns_false`, `test_upload_bytes_426_data_stream_failure_returns_false`) are renamed and split: `test_upload_426_with_intact_file_proceeds` (SIZE matches → returns True, the reporter's case), `test_upload_426_with_truncated_file_returns_false` (SIZE smaller than expected → still fails, the original bug we don't want to regress), `test_upload_426_with_size_check_failing_returns_false` (SIZE itself raises → assume the worst), plus parallel coverage for `upload_bytes()`. The intact-file tests have to inject `SIZE` explicitly because the pyftpdlib mock only flushes the on-disk file after a clean voidresp — which doesn't happen when we monkeypatch voidresp to raise — and the docstring spells that out for future readers. 87 FTP unit tests green; ruff clean. The View-Timelapse-greyed-out behaviour the original #1417 report flagged stays untouched here — once the reporter confirms their upload reliability is back, that diagnosis continues on a healthy install.

- **AMS: physically-empty slots now consistently report state=9 (#1322 follow-up, diagnosed by @RosdasHH)** — Reporter dug into the BambuStudio source and pointed out that our previous fix only caught the narrow `{"id": N}` bare-payload shape, which Bambu firmware only sends right after a printer restart. In steady-state operation — including the more common post-Reset-Slot path on P1S and the A1 Mini BMCU — firmware sends a populated payload with stale fields and signals emptiness via the `tray_exist_bits` bitmask instead. Bambuddy already parsed that bitmask at `bambu_mqtt.py:1758` (`slot_exists = (tray_exist_bits >> global_bit) & 1`) and used it to wipe stale `tray_type` / `tray_color` / `tag_uid` fields, but never promoted the slot's `state`. So downstream readers — the API serializer at `printers.py:457`, the `tray_state in {9, 10}` short-circuit in `inventory.py:1358`, the AMS card — all saw `state: null` and had to guess from absent payload fields. Reporter's API screenshot showed exactly that shape: `state: null, tray_color: null, remain: 0, ...`. Fix lifts a `tray["state"] = 9` assignment to the outer `if not slot_exists` branch (was nested inside the stale-data-clear branch), so the bitmask path now writes the canonical "no spool" state for every empty slot regardless of whether stale fields are present. Hard-typed as `int` 9, not string `"9"` — the downstream check at `inventory.py:1358` uses `tray_state == 9` (not `in {"9", 9}`), so a string would have silently missed and the reporter's deadlock would have come right back. The previous narrow heuristic in `printer_manager.py:797-798` (the `len(tray) == 1 and "id" in tray` shape detector) stays in place as belt-and-suspenders for the post-restart bare-payload edge that bypasses the AMS merge — costs nothing and protects against any MQTT path that doesn't flow through `_handle_ams_data`. The `state: null` surfacing on the API resolves automatically since `printers.py` reads `tray_data.get("state")` directly. **Tests:** two new in `test_bambu_mqtt.py::TestAMSDataHandling` — `test_tray_exist_bits_promotes_empty_slot_to_state_9` exercises the steady-state populated-payload path (slot occupied → bitmask flips bit 1 to 0 → state=9, type-asserted as int; loaded sibling slot keeps its state=11 unchanged); `test_tray_exist_bits_does_not_change_state_on_loaded_slots` pins the negative path (bitmask bit=1 with state=3 leaves state untouched — transitional firmware states like "unloading" don't get corrupted). The two `printer_manager.py` regression tests for the narrow heuristic (`test_bare_tray_emulates_state_9`, `test_populated_payload_with_empty_state_3_is_not_promoted`) stay green — that path is unchanged. 397 mqtt+printer-manager unit tests + 50 inventory/Spoolman slot-assignment integration tests = 447 affected tests green; ruff clean. **UI: visual distinction between physically empty and unconfigured slots (in the same drop).** With the data layer now consistent, the AMS slot card surfaces what Bambuddy actually knows about each empty slot, without overclaiming. New helper `getEmptySlotKind(tray)` in `PrintersPage.tsx` returns `"physical"` (state ∈ {9, 10} — firmware positively confirmed no spool), `"reset"` (any other empty state — could be a user-cleared assignment, mid-unload, or just a slot the firmware hasn't reported on yet), or `null` (loaded). The inline label below the slot circle reads `t('ams.slotEmpty')` ("Empty") uniformly for any empty slot (regular AMS, HT, external) so users get a consistent label everywhere — the previous version only said "Empty" for firmware-confirmed state=9 slots and fell back to an em-dash otherwise, which surfaced as "Empty" for regular AMS slots but "—" for HT AMS (skipped by the bitmask loop) and external trays (separate MQTT path entirely). The state distinction now lives only on the **border** and **hover card** where it doesn't surprise. `FilamentSlotCircle` gains an `emptyKind` prop that picks a quieter dashed border colour for unconfigured slots (`#3d3d3d` vs `#666`), so the visual hierarchy reads "loaded > unconfigured > physically empty" at a glance even though the inline text only differentiates physical from everything else. `EmptySlotHoverCard` gains a `kind` prop and switches the hover label between `ams.emptySlot` ("Empty slot") for physical and the new `ams.emptySlotReset` ("No filament assigned") for everything else — also rewritten from the original "Slot reset — no spool assigned" for the same overclaim reason. All three slot-render call sites in `PrintersPage` (regular AMS grid, HT AMS single-slot, external spool tray) now compute and pass the kind. i18n: 2 new keys (`slotEmpty`, `emptySlotReset`) translated across all 8 locales; parity at 4854 leaves. New test `#1322: empty slot kind is "physical" when state=9 and "reset" otherwise` in `PrintersPage.test.tsx` reuses the existing `phase13EmptySlotProps` mock to capture the `kind` prop across a 4-slot fixture (state=9 / state=3 / state=null / loaded) and asserts each variant flows through. 71 PrintersPage + FilamentHoverCard tests green; build clean.

- **Stats page: Filament Used, By Time, and Success Rate now agree with Total Consumed and Total Prints (#1390 follow-up, reported by @IndividualGhost1905)** — After the archived-spool fix shipped the reporter confirmed it worked and gently flagged the round Bambuddy had explicitly postponed: Quick Stats `Filament Used` / `Filament Cost` didn't match `Total Consumed` on the Inventory page; Printer Stats `By Time` didn't match Quick Stats `Print Time`; the success-rate gauge percentage didn't relate to the `Total Prints` count shown right above it. Three independent root causes, fixed together. **(1) Filament Used vs Total Consumed.** `_compute_run_filament_grams` in `main.py` short-circuited to the slicer estimate for `status == "completed"` even when inventory had measured the actual AMS weight delta — the comment on the old test literally said "the print is done, so the full estimate is the right answer." That made Stats and Inventory two different sources of truth: Stats showed slicer-estimate grams, Inventory showed AMS-tracked grams, and the two numbers naturally diverged (slicer estimates are typically a few percent off real consumption). Fixed by reordering the helper so the tracked spool delta (sum of `usage_results[].weight_used` — same source that drives the per-spool `weight_used` counter behind Total Consumed) takes priority for *every* status. The slicer estimate stays as the fallback when no inventory was tracked for the print, and the partial-progress scale stays as the fallback for failed/cancelled/stopped with no tracker — so the existing #1378 partial-aware behaviour is preserved. The `_run_cost` block right next to it already used this priority order, so cost was always tracker-first; only `filament_used_grams` was inconsistent. New prints now record what was actually consumed, so Stats and Inventory show identical numbers. **(2) Printer Stats By Time vs Quick Stats Print Time.** `/archives/slim` only populated `actual_time_seconds` when `status == "completed"`. For failed/cancelled rows the field stayed null and the frontend (`StatsPage.tsx::PrinterStatsWidget`) fell back to `print_time_seconds` — the slicer's *estimated full-print duration*, which is the wrong number for a print that failed at 15% progress. Quick Stats `total_print_time_hours` already counted every event's elapsed `duration_seconds` regardless of status, so the two halves of the page disagreed by the (estimate − actual-elapsed) gap on every non-completed event. Dropped the `status == "completed"` gate in the slim row's `actual_time_seconds` computation; failed/cancelled events now report their measured elapsed time and the frontend's `actual || print_time` fallback chain only ever falls through to the slicer estimate for events with no measured duration at all. **(3) Success Rate %.** Formula was `successful / (successful + failed)`, denominator excluding `cancelled` / `stopped` / any other status. Combined with the visible "Total Prints: N" label right above the gauge, that produced confusing numbers: 4 successful, 0 failed, 48 cancelled showed 100% out of an apparent 52 prints. Switched to `successful / total_prints` — straightforward "what fraction of all attempts succeeded", matches the count the user reads from the widget header. The widget's `stats` prop already exposed `total_prints` so no type changes were needed. **(4) Records widget "Longest Print" — knock-on from (2).** Before (2), `actual_time_seconds` was null for non-completed rows so the Records widget's `findMax(a => a.actual_time_seconds)` implicitly only ranked successful prints. Once (2) populated the field for failed/cancelled events too, an aborted 25-hour print would have outranked a genuinely successful 18-hour print as "Longest Print" — a real semantic regression. Added a `status === 'completed'` gate on the longest getter only, restoring the pre-fix semantic. The other two records (Heaviest Print, Most Expensive) already included non-completed events via `filament_used_grams` and `cost` and intentionally stay as-is, since those values are populated by the partial-progress / tracker logic in `_compute_run_filament_grams` and were never gated on status. **Out of scope** — backfilling the 52 historical events on the reporter's database: `PrintLogEntry.filament_used_grams` is already baked in as the slicer estimate for older prints and we don't store per-event AMS deltas separately to backfill from. The reporter said upfront she'd "reset all statistics and start over" to track new prints cleanly, so this lands without a migration. Similarly the Failure Analysis 30-day default (a separate divergence the agent surfaced while mapping the page) wasn't part of the reporter's complaints and stays untouched. **Tests:** `test_run_filament_helper.py::test_completed_returns_estimate_even_when_tracked_differs` was renamed and inverted to `test_completed_prefers_tracked_over_estimate` — it now pins the new contract (completed + tracker → tracker value), guarding against a future "trust the estimate again" refactor. All 13 existing helper tests still green; the helper's contract changed in exactly one place and the rest (no-tracker fallback, partial-progress scaling, multi-slot summation) is unchanged. `test_archives_api.py::test_slim_actual_time_null_for_failed` was renamed to `test_slim_actual_time_for_failed_includes_elapsed` and inverted — same pattern, the old assertion is now the regression check. `StatsPage.test.tsx` gains two: `uses total_prints as denominator so cancelled/stopped events count (#1390)` (40 successful / 20 failed / 40 cancelled-or-stopped = 40%, matches Total Prints: 100, where the old formula would have shown 67%); and `Longest Print excludes failed prints (#1390)` pinning that an aborted 25-hour run can't outrank a successful 8-hour print as the Longest Print record — protects against a future refactor that removes the new status gate inside `findMax`. 33 StatsPage tests + 66 archive-API + run-filament tests green; frontend build clean.

- **Inventory: "Total Consumed" now includes archived spools' usage, and the eraser works on archived too (#1390 follow-up, reported by @IndividualGhost1905)** — After the original #1390 fix shipped, the reporter noticed that archiving a spool with consumed weight quietly subtracted that weight from the "Total Consumed" stat at the top of the Inventory page, and un-archiving put it back. Total Consumed is a *running* counter (lifetime usage since the last reset), not a current-inventory snapshot, so a spool's recorded prints SHOULD stay in the total even after the user archives the physical roll — otherwise the reset baseline becomes meaningless and the running total walks down as users tidy up their inventory. Root cause was a stats loop in `InventoryPage.tsx` that gated every aggregate (totalConsumed, totalWeight, lowStock, byMaterial, activeCount) behind a single `if (s.archived_at) continue;` check. Fix splits the loop so `totalConsumed` is computed BEFORE the archived-skip and the other aggregates after it, matching the semantic difference between "running counter" and "currently-available inventory". Two adjacent regressions the reporter also surfaced are fixed in the same pass: (a) the per-spool **eraser button** in the inventory card grid used to require `!spool.archived_at && spool.weight_used > 0` — archived spools had no way to zero their tracking counter without first being un-archived. The `archived_at` half of that gate is gone; the `weight_used > 0` half stays. (b) `activeSpoolIds`, the target list for the "Reset all usage" bulk action, used to filter out archived spools — so a Reset-all click left archived consumption stuck in the (now-corrected) totalConsumed total. Renamed to `resetableSpoolIds` and broadened to include archived, so a Reset-all genuinely zeroes the stat in one click. Backend reset endpoints already accept archived IDs (both `inventory.py::reset_spool_usage` and the Spoolman mirror), so this is frontend-only. Inventory-mode parity holds (both modes share `InventoryPage`). i18n: 8 tooltip/confirm strings retranslated across all 8 locales — the "every active spool" / "all {{count}} active spools" wording was now incorrect (archived included), so each locale's `resetAllUsageTooltip` drops "active" and `resetAllUsageConfirm` makes the archived-inclusion explicit ("(archived included)" / "(incluindo as arquivadas)" / "（含已归档）" etc.); parity holds at 4852 leaves. Tests: a new `InventoryPageArchivedConsumed.test.tsx` with a 2-spool fixture (active 300 g + archived 500 g) pins `totalConsumed = 800g` after the fix and asserts the "Reset all spool usage" button stays rendered; a future refactor that re-introduces the archived-skip drops the assertion to "300g" and CI fails. 13 InventoryPage tests + i18n parity + build all green.

- **P2S camera: relaxed ffmpeg probe settings so the RTSP stream actually locks (#1395 follow-up, reported by @Tschipel)** — Reporter on a P2S running firmware 01.02.00.00 saw the camera connect for a few seconds and then time out, repeating. P1S on the same install worked fine because P1S uses the chamber-image protocol (port 6000), not RTSP — different code path. The P2S RTSP path was running ffmpeg with `-probesize 32 -analyzeduration 0`, tuned for X1/H2 fast startup. The P2S's slower keyframe pacing means ffmpeg can't lock onto the stream within 32 bytes; its own stderr literally says "Stream #0: not enough frames to estimate rate; consider increasing probesize". After ~2 s ffmpeg gives up, Bambuddy reconnects, the cycle repeats. The naïve "just bump probesize" patch would regress every other RTSP-capable printer, so the fix is also the first step of the camera architecture overhaul: per-model tuning lives in a new `backend/app/services/camera_profiles.py` registry instead of hard-coded module constants. `CameraProfile` dataclass holds the previously-global knobs (`probesize`, `analyzeduration`, `rtsp_reconnect_max`, `rtsp_reconnect_delay`, plus an `extra_ffmpeg_input_args` hook for future per-model flags); `get_camera_profile(model)` returns the model's profile or the default. The default profile preserves the historical X1/H2 fast-startup values verbatim — X1, X1C, X1E, X2D, H2C, H2D, H2D Pro, H2S all see no behaviour change. P2S gets the only override today: `probesize=1_000_000`, `analyzeduration=500_000` — enough room for the slow keyframe without adding multi-second startup latency. Internal SSDP codes (e.g. `N7` → P2S) resolve via an alias map so the camera path works during the early-connect window before the display name is settled. The two `_RTSP_MAX_RECONNECTS` / `_RTSP_RECONNECT_DELAY` module constants are gone in favour of `profile.rtsp_reconnect_max` / `profile.rtsp_reconnect_delay`; same defaults, but now overridable per model. Pattern is intentionally extensible — adding the next quirky model is a config entry in `_PROFILES`, not another global constant. **Tests:** 9 new in `test_camera_profiles.py` cover unknown model → default, `None`/empty → default, default preserves historical values, P2S has relaxed probe, P2S internal code (`N7`) resolves to P2S profile, lookup is case-insensitive, every other RTSP model still uses the default (so the next refactor regression is caught at unit-test time), profile is frozen (immutable). 58 existing camera-related tests still green; 5008 backend tests total green; ruff clean.

### Changed
- **Inventory: spool ID surfaced in the edit modal and the AMS filament hover card (#1385, contributed by @chanakyan-arivumani in #1402, reported by @pgladel)** — Reporter asked for the Spoolman / internal spool ID to be visible when editing a spool and when hovering the AMS-loaded filament tile, so the install can be cross-checked against the underlying spool row without opening Spoolman's UI separately. The data was already on the rendered components; only the rendering was missing. `SpoolFormModal` header now shows `#<id>` in muted monospace next to the "Edit Spool" title — but **only** in edit mode; copy and create paths don't surface an ID because no stable ID exists yet (a copy produces a new spool, and surfacing the source spool's ID there would mislead the user into thinking the new spool inherited it). `FilamentHoverCard`'s assigned-spool block shows the same `#<id>` inline with the brand/material/colour line; the existing `<p class="truncate">` is wrapped in a flex container with `min-w-0` on the parent and `shrink-0` on the new span so the truncation still kicks in on long names and the ID stays at full width. Inventory-mode parity holds without any branching — both internal and Spoolman spools carry an `id` with the same shape so the modal renders the right ID regardless of which inventory backend is in use. Tests: one regression in `FilamentHoverCard.test.tsx` (asserts `#42` renders in the assigned-spool block) plus three added in `SpoolFormModal.test.tsx` as post-PR work — edit mode shows the ID, create mode shows none, copy mode shows none. The copy-mode test is the load-bearing case: a future refactor that drops the `isEditing &&` guard would silently start leaking the source spool's ID into the Copy header, and now fails the test instead. 51 affected frontend tests green; frontend build clean.

- **Archives → Print Log: filename column expands to fit available width and wraps long names instead of clipping at 200 px (#1406, requested by @daFreeMan)** — Reporter on a 27" monitor saw long filenames like `Simple_Print_Monitor_-_ST7789_1.54_display_case_` truncated even though the table had plenty of unused horizontal space. The print-name `<span>` had a hard `truncate max-w-[200px]` cap that ignored viewport width entirely. Replaced with `break-words` + a `title` attribute, dropping the explicit max-width so the column auto-sizes to content. On wide screens the full name shows on a single line; on narrow ones it wraps inside the cell instead of forcing horizontal scroll. The `title` hover preserves the original tooltip affordance for the rare case where a really long name still gets truncated by viewport constraints. Frontend build clean; 23 ArchivesPage tests still pass.

### Fixed
- **Library "Open in Slicer": broken when the display name lacked `.3mf` or contained `/ \ ? #` (#1413, contributed by @benhalverson in #1416, reported by @ddingg)** — Reporter on Windows 11 / Chrome saw Bambu Studio and OrcaSlicer reject the slicer URL from the 3D-preview modal's "Open in Slicer" button with a parse error, even though downloading the same URL with curl worked. The MakerWorld "Save and open" path and the "Recent imports" entry both worked fine — different code path. Root cause: `GET /library/files/{file_id}/dl/{token}/{filename}` uses the URL-tail filename purely as a hint for the slicer to detect the file format from the path; the backend itself reads `file.filename` from the DB (`library.py:3806`) and ignores the URL segment. When `ModelViewerModal.handleOpenInSlicer` passed the modal `title` (display name like `"Mecha Mewtwo No AMS Multi Color Parted Statue"` — no extension) verbatim through `encodeURIComponent`, the resulting URL ended without `.3mf` and the slicer's client-side extension sniff refused to parse the response. The same path also let `/ \ ? #` through, which can survive `encodeURIComponent` (`/` is unencoded by spec) and break the slicer's URL parser separately. Fix adds a small `buildSlicerUrlFilename(filename)` helper to `frontend/src/api/client.ts` that strips `/ \ ? #` (replacing them with `_`) and appends `.3mf` when missing; `getLibrarySlicerDownloadUrl` now routes the filename through it before `encodeURIComponent`. The `.3mf` check is case-insensitive (`safe.toLowerCase().endsWith('.3mf')`) so `model.3MF` is handled correctly — a subtle improvement over the equivalent inline logic that's still present on the archive-side helpers `getArchiveForSlicer` and `getArchiveSlicerDownloadUrl` (call-site consolidation is a separate follow-up). Safe because `ModelViewerModal.tsx:264` already gates the button to `fileType === '3mf'` library files, so unconditional `.3mf` append never produces nonsense like `model.gcode.3mf`. Two new tests in `frontend/src/__tests__/api/client.test.ts` cover both branches (display name without extension → `.3mf` appended; display name with `/ ? #` → replaced with `_`). 21 client tests green; frontend build clean.

- **Add Spool modal: hex colour field can be typed into character-by-character again (#1407, reported by @anthonyma94)** — Pre-fix, after typing the first hex character the input's value snapped to e.g. "A00000" (the #1055 fix aggressively padded to 8 chars on every keystroke), the cursor jumped to the end, and the next keystroke landed at position 7 — which the original 7-char-truncation branch then dropped. Net effect: only the first character was ever typed; the rest stayed as zeros unless the user pasted a full hex code. Fix splits "what the user is typing" from "what gets sent to the backend": the input now has its own draft state holding 0–6 chars freely, and `updateField('rgba', ...)` only fires once the draft reaches a complete 6-char RGB (commits as `<6chars>FF`). On blur, a partial 1–5 char draft is right-padded with `0` and committed so the form state always carries a valid 8-char rgba — preserves the #1055 invariant that the backend never sees a malformed value, without re-introducing the truncate-on-keystroke trap. A `useEffect` keeps the draft in sync when an external action (the colour picker, a swatch click, edit-mode load) changes the canonical hex. Paste of 7-/8-char strings truncates to the leading RGB triplet: Bambu filaments are opaque and the UI never exposed an alpha affordance, so dropping the (undocumented) "paste with alpha" case is fine. The existing `ColorSectionHexInput.test.tsx` was rewritten to match the new contract — 8 tests covering both new behaviours (draft reflects each keystroke, no commit while partial, commits on length 6, blur-padding for partials, no commit when cleared then blurred) and the kept #1055 invariants (committed rgba is always 8 hex chars, 7-/8-char paste truncates, non-hex chars stripped). 51 spool-form frontend tests green; frontend build clean.

- **Virtual Printer queue: timelapse / bed-leveling / flow-cali / vibration-cali / layer-inspect now inherit the slicer's choice instead of always falling back to global defaults (#1403, reported by @pwostran)** — Reporter sliced in OrcaSlicer with timelapse enabled, sent to a VP queue, started the job from the queue and got no timelapse video. The dispatch chain itself was correct (queue item → scheduler → MQTT command honours `timelapse`); the gap was at queue-add time: the VP's `_add_to_print_queue` read `default_timelapse` from settings (introduced in #1235 to stop column defaults from winning), but ignored the slicer's project_file MQTT command entirely. The slicer's choice — which Bambu Handy / Bambu Studio / Orca all surface in their "Print options" dialog and ship in the MQTT payload as `timelapse: true|1` — was being thrown away. So a user with `default_timelapse=false` (the new-install value) would have to either flip the global setting or manually edit every queue item, even though their slicer's UI was clearly saying "record timelapse for this job". Fix: `on_print_command` in the VP manager now stashes the slicer's project_file dict keyed by filename, and `_add_to_print_queue` waits up to 2 s for that capture before reading the settings fallback. Each option flows through per-field — slicer value wins if present, else the existing settings default (so users who explicitly set `default_timelapse=true` in their VP workflow card still get that on slicers that don't send a print command). MQTT field naming is preserved exactly: `bed_leveling` (single L) on the wire stays mapped to `bed_levelling` (double L) on the Bambuddy column. Integer 0/1 from H-family slicers and bool true/false from P1/X1 slicers both coerce correctly via `bool()`. Wait is skipped when there's no MQTT server attached to the VP instance (covers unit tests calling `_add_to_print_queue` directly so they don't pay the 2 s tax) and capture is consumed on use so the dict stays bounded across many prints. Two new regressions in `test_virtual_printer.py::TestPrintQueueMode`: `test_add_to_print_queue_inherits_slicer_print_options` (slicer=True overrides settings=False across all 5 fields; capture is consumed) and `test_add_to_print_queue_coerces_slicer_integer_zero_one` (H-family integer payload is coerced). The existing `#1235` test (`test_add_to_print_queue_uses_workflow_defaults_from_settings`) still passes because the no-MQTT-attached gate skips the wait, so the settings fallback path is preserved when no slicer capture exists. **Plus two side-bugs surfaced while investigating Martin's "modal not respected" hypothesis** — the support-package evidence cleared the reprint modal (46 `print_scheduler` and 33 `background_dispatch` events with `timelapse: true` shipped to real P1S printers, end-to-end working), but the same dig turned up two latent issues worth fixing in the same pass: (a) **`POST /webhook/printer/{id}/start` was broken on four axes** — `await printer_manager.start_print(...)` against a `def` (not `async def`) function, `queue_item.archive_id` (int) passed as the `filename` arg, `printer_manager.get_status(...).get(...)` against a `PrinterState` dataclass (not a dict), and every print option discarded (timelapse, bed_levelling, AMS mapping). The route would 500 before ever reaching the printer. Rewritten to mirror `POST /print-queue/{item_id}/start`: just clear `manual_start=False` on the next pending queue item and let the scheduler dispatch it with the queue's stored options intact. Three new regressions in `test_webhook_start_print.py` (clears `manual_start`, preserves stored print options, 404 when no pending items / unknown printer). (b) **`vibration_cali` default drift in `background_dispatch.py`** — `ReprintRequest.vibration_cali` and `FilePrintRequest.vibration_cali` both default to `True` (matches Bambu Studio behaviour for X1/P1 series), but the two `_process_job` call sites read `job.options.get("vibration_cali", False)`. Cosmetic today because the frontend always sends the field, but a latent landmine for any future caller that bypasses the schema (e.g. an internal dispatcher seeding options programmatically). Both call sites flipped to `True`; new contract test `test_dispatch_option_defaults_align_with_request_schema_defaults` introspects the source to lock the alignment for all six print-option fields so this drift can't recur. 116 VP unit tests green; 4999 backend tests green; ruff clean.

- **Inventory: "Reset usage to 0" no longer inflates remaining weight back to label_weight (#1390 follow-up, reported by @IndividualGhost1905)** — Reporter reset a 544 g spool's consumed counter and watched its displayed remaining jump to 1000 g — exactly the opposite of what the dialog promised ("Spools and remaining weights are not changed"). Root cause was an architectural conflation in the internal inventory model: a single `weight_used` column was doing two jobs, the resettable "consumed since tracking started" stat AND the basis for the displayed remaining (`label_weight - weight_used`). Zeroing it correctly cleared the stat but unavoidably reset remaining to full. Spoolman has separate `used_weight` and `remaining_weight` fields, so its API call was correct, but Bambuddy's frontend was *also* computing remaining as `label_weight - weight_used` for Spoolman spools (ignoring Spoolman's real `remaining_weight` field), so the same visual bug bit in Spoolman mode too. **Internal mode fix:** new `weight_used_baseline` column (Float, default 0) on the `spool` table; the "Total Consumed" display is now `weight_used - weight_used_baseline` clamped to ≥0; the reset endpoints stamp `baseline = weight_used` and leave `weight_used` untouched, so remaining (= `label_weight - weight_used`) is preserved. Subsequent prints continue to grow `weight_used` and the resettable counter naturally tracks the post-reset delta. **Spoolman parity fix:** `_map_spoolman_spool` now reads Spoolman's `remaining_weight` field and returns a synthetic `weight_used = label_weight - remaining_weight` so the frontend's remaining calc matches Spoolman's real stored value; `weight_used_baseline` is computed as `synthetic_weight_used - real_used_weight` so `weight_used - baseline` equals Spoolman's `used_weight` (the resettable counter). After a Spoolman reset (real used_weight=0, real remaining_weight=544) the user sees consumed=0 and remaining=544 — identical to internal mode. Also fixed a related Spoolman bug: editing a spool's metadata after a reset would PATCH Spoolman with `remaining_weight = label - used_weight = 1000`, overwriting the real 544 g; `update_spool` now derives the default `weight_used` from Spoolman's `remaining_weight` instead of `used_weight` so non-weight edits preserve the existing physical state. Frontend `totalConsumed` aggregate in `InventoryPage` and the three "consumed" displays in `ForecastPanel` (delta-rate, per-SKU totalUsedG, per-spool consumed cell) all switched to `Math.max(0, weight_used - (weight_used_baseline ?? 0))`. The `?? 0` fallback keeps pre-migration installs rendering correctly until `init_db()` runs the idempotent `ALTER TABLE spool ADD COLUMN weight_used_baseline REAL DEFAULT 0` (works on both SQLite and Postgres). **Tests:** `test_spool_reset_usage.py` rewritten — old asserts that the endpoint zeroed `weight_used` now assert it stamps baseline = weight_used and leaves weight_used alone, plus a new `test_reset_then_print_advances_only_the_counter` test that simulates a 50 g print after a reset and confirms `consumed=50, remaining=494` (i.e. remaining keeps decrementing across the reset). `test_spoolman_inventory_helpers.py` gets two new tests on the mapper covering pre-reset and post-reset Spoolman shapes. `test_spoolman_inventory_api.py::test_reset_spool_usage` updated to assert the new InventorySpool contract (consumed=0, remaining=750, baseline absorbs the reset). 4993 backend tests green; ruff clean; frontend build clean. Per the inventory-parity rule saved last session: both modes now ship the same UX, both call sites verified end-to-end before declaring done.

- **Adding a printer with a wrong access code (or unreachable IP) no longer creates an empty card** — Several support reports traced back to a single root cause: the user mistyped their access code in the Add Printer dialog, `POST /printers/` happily persisted the row, the subsequent `printer_manager.connect_printer()` call was fire-and-forget so the failure was invisible, and the dashboard ended up showing a printer card that could never display state. The create route now runs `printer_manager.test_connection()` (the same MQTT probe the standalone Test Connection button has always used) BEFORE inserting the row, and refuses with HTTP 400 if the probe fails. The Printer row is never written on failure. **Structured error response**: backend returns `{detail: {code: "printer_connection_failed", message: "..."}}` rather than a plain English string — the new `ApiError.code` field on the frontend lets the toast layer pick a localized `printers.toast.connectionFailedNotAdded` key instead of surfacing the English fallback. **Existing tests** kept green via an autouse `_mock_printer_test_connection` fixture in `test_printers_api.py` that defaults the probe to success; a new `test_create_printer_rejects_when_mqtt_probe_fails` asserts the failure path returns 400, surfaces the stable code, AND verifies the row was not persisted (the critical part — earlier versions of the regression would have passed even if we'd left the row behind). 8 new i18n translations for `printers.toast.connectionFailedNotAdded` across all 8 locales; parity holds at 4831 leaves. 28 printer-route tests green.

### Changed
- **GitHub backup: save-failure messages render inline on the card instead of as a toast** — The new "repository is not private" rejection message is ~250 chars listing every credential the backup carries, which clips badly in a toast. Both the initial-setup save and the debounced autosave now stash the backend's error message into a new `saveError` state and render it as a red inline banner above the test-result block, with `whitespace-pre-wrap` so the full message stays readable. The banner clears on a successful save, on the next save attempt, and as soon as the user starts editing the URL / token / provider (the three fields whose changes invalidate the privacy check) — so it doesn't linger after the user has already addressed the cause. Short success toasts ("Settings saved", "Token updated", "Backup enabled") are unchanged. Manual dismiss button included for users who want to clear it without retrying.

### Security
- **GitHub backup refuses to save against a non-private repository** — While auditing real-world Bambuddy backup repos on GitHub I found several that were left public by their owners. That's a serious data leak: the settings backup only filtered `bambu_cloud_token` and `auth_secret_key`, so `mqtt_username`, `mqtt_password`, `ha_token`, `prometheus_token`, `bambu_cloud_email`, `external_url`, and the printer access codes (via K-profiles, which carry the serial number) were going to whatever visibility the user picked when they created the repo. Fix is a hard guard at every save and re-checked on every push: **`POST /github-backup/config` and `PATCH /github-backup/config`** (when the URL, token, or provider changes) run a connection test internally and return HTTP 400 unless `is_private` comes back True. Same check fires inside `run_backup()` before every scheduled or manual push, so a repository that was private at config time but later flipped to public in the provider's UI gets a clear "Backup aborted: the target repository is no longer private" failure entry instead of leaking the next backup. Implementation: each provider's `test_connection` (`GitHubBackend`, `ForgejoBackend` override, `GitLabBackend` override; `GiteaBackend` inherits unchanged) now returns `is_private: bool | None` — `True` for confirmed private, `False` for public (or GitLab's `internal`), `None` for "couldn't determine" (older self-hosted APIs, non-2xx responses). The route helper `_enforce_private_repo` rejects anything that isn't `True`, with separate error messages for the public case ("Make the repository private...") vs the unknown-visibility case ("...could not confirm..."). **Frontend** test-connection UI now renders the visibility result inline — green check + "Repository is private — safe to back up to" when confirmed, red banner with the full list of credentials at risk + "Saving is blocked until..." when public, yellow banner + "could not determine" when null. Three new i18n keys (`repoIsPrivate`, `repoIsPublicWarning`, `repoVisibilityUnknown`) translated across all 8 locales; parity holds at 4830 leaves. **Wiki** `docs/features/backup.md` gains a top-level `!!! danger "Private repositories only"` block listing what's at stake and what to do if the user already has a public backup repo, plus every per-provider setup step is updated from "(can be private)" to "(**must be private**)". **Tests**: 5 new in `test_github_backup_api.py::TestGitHubBackupPrivateRepoGuard` — create rejects public (400 + "not private" in detail), create rejects unknown visibility (400 + "could not confirm"), create rejects failed test_connection (400 + propagates the underlying message), PATCH that changes the URL re-runs the check and rejects on public, PATCH that touches an unrelated field (e.g. `schedule_enabled`) does NOT call `test_connection` (proven via a mock that raises if called — without the field-change gate, every benign toggle would trigger a live API call). The existing 15 tests now use an autouse fixture that mocks `test_connection` to return private-success so they don't try to reach github.com. 4905 backend tests green.

### Fixed
- **Spoolman edit-spool: editing a spool no longer mints duplicate filaments in the Spoolman catalogue (#1357 follow-up, reported by @pgladel)** — After the initial #1357 close, the reporter showed that BB was still spawning new Spoolman filament rows on every subsequent edit. The previous fix taught `find_or_create_filament` to bridge the AMS-sync name shape (`"Glow"`) with the user-edit shape (`"PLA Glow"`), but only on the *find* path — the moment the user changed any field that fed the match key (subtype/material/brand/color_hex) the lookup missed and a brand-new filament was created, the spool was re-linked to it, and the previous filament was orphaned. Repeating the loop produced the spread the reporter screenshotted (IDs 126/127/128/129 all "Amazon Basics / PLA Glow / PLA", slight color variants). Root fix is a behaviour change in `PATCH /spoolman/inventory/spools/{id}`: before calling `find_or_create_filament`, the route now computes whether the desired metadata still matches the current linked filament and, if so, skips the lookup entirely (a no-op metadata edit — just `note` or `weight_used` — never touches the filament catalogue). When metadata IS changing it consults a new `SpoolmanClient.is_filament_shared(filament_id, exclude_spool_id)` helper: if the current filament is a *singleton* (only this spool points at it, archived spools included so a sibling-archive doesn't fake singleton-ness), the route PATCHes that filament in place via `patch_filament` — `name`, `material`, `color_hex`, `weight`, plus a `vendor_id` resolved via `find_or_create_vendor` when the brand changed. Only when the filament is genuinely shared with another spool does the route fall back to the legacy `find_or_create_filament` path, because PATCHing a shared filament would silently rewrite every sibling spool's metadata. Net effect mirrors internal-inventory behaviour ([[feedback_inventory_modes_parity]] saved this session): editing a spool updates the thing the spool already points at, instead of proliferating new entities. Three new tests in `test_spoolman_inventory_api.py::TestSpoolmanInventoryCRUD` cover the new contract: a no-op metadata edit (only `note`/`weight_used`) does NOT call `find_or_create_filament` OR `patch_filament`; a subtype change against a singleton filament calls `patch_filament(7, {...name: "PLA Matte"})` and NOT `find_or_create_filament`; the same change with `is_filament_shared` mocked to True falls back to `find_or_create_filament` and does NOT call `patch_filament`. 162 spoolman-inventory tests + 192 broader spoolman tests green; ruff clean.

- **Inventory: "Print labels…" now works in Spoolman mode** — Both endpoints already exist (`POST /inventory/labels` for the built-in table, `POST /spoolman/labels` for Spoolman), and the `LabelTemplatePickerModal` correctly branches on a `spoolmanMode` prop. But the modal was instantiated in `InventoryPage.tsx` with `spoolmanMode={false}` hard-coded, with a stale comment from the original PR claiming "Spoolman path hands users an iframe straight to Spoolman so the per-spool button never shows in that context". That assumption stopped being true when the unified inventory UI shipped — the per-spool button DOES show in Spoolman mode now, but every click resolved to `/inventory/labels` with Spoolman spool IDs and returned `404 Spool(s) not found`. Fix passes the actual `spoolmanMode` value through to the modal (one-line change, plus removing the stale comment block). The existing `LabelTemplatePickerModal.test.tsx` already covers both branches at the component level — the gap was that no test exercised the InventoryPage wiring. This is another instance of the parity rule from [#1390 follow-up]: inventory features must ship the same UX in both modes; per the new feedback memory, any future inventory change gets a mental checklist of both routes + both client methods + both UI gates before being considered shipped.

### Added
- **Inventory: "Reset usage to 0" also works in Spoolman mode (#1390 follow-up)** — The first cut of this action only wired the built-in inventory path, so Spoolman users saw the eraser icon disappear when they switched modes. Now the same two endpoints exist on the Spoolman inventory router: `POST /spoolman/inventory/spools/{spool_id}/reset-usage` PATCHes Spoolman's `/spool/{id}` with `used_weight: 0` for a single spool, `POST /spoolman/inventory/spools/reset-usage-bulk` does the same per ID across an explicit list and returns `{reset: N}` (individual Spoolman failures are logged and counted out, the batch keeps going). A `reset_spool_usage(spool_id)` helper on `SpoolmanClient` is the actual HTTP call. The mutations in `InventoryPage.tsx` already had the right shape — they now switch on `spoolmanMode` to pick `api.resetSpoolmanInventorySpoolUsage` / `api.bulkResetSpoolmanInventorySpoolUsage` vs the internal-inventory client methods, and the three `spoolmanMode ? undefined : ...` gates that hid the eraser buttons in Spoolman mode are gone. Three new tests in `test_spoolman_inventory_api.py` lock the Spoolman path (per-spool, bulk, and the typo-wipe guard on empty list). The wiki page now says "Spoolman users get the same actions" instead of the original "Spoolman-mode users don't see either button" note. 4900 backend tests green.
- **Inventory: "Reset usage to 0" per spool and across all active spools (#1390 follow-up, requested by @IndividualGhost1905)** — Each spool's `weight_used` counter accumulates over its lifetime and feeds the "Total Consumed (Since tracking started)" stat on the Inventory page. There was no way to clear it without nuking the spool or manually editing the field — and manually setting `weight_used=0` via PATCH /spools/{id} auto-locks the spool (`weight_locked=true` is auto-set whenever `weight_used` is sent explicitly, so AMS auto-sync stops touching the spool), which is the wrong behaviour for "clean-slate my Total Consumed stat so future prints track from zero". **Two dedicated endpoints** in `backend/app/api/routes/inventory.py` zero the counter without touching the lock flag: `POST /inventory/spools/{spool_id}/reset-usage` (single spool) returns the updated `SpoolResponse`; `POST /inventory/spools/reset-usage-bulk` (`{spool_ids: [int, ...]}`) returns `{reset: N}`. The bulk endpoint rejects empty / missing `spool_ids` (HTTP 400) — no wildcard / "reset-all" shortcut, since a typo there would wipe the entire inventory's tracking; the caller must explicitly pass the list. Both leave `weight_locked` alone: if the user had locked the spool, the lock stays; if it was unlocked, it stays unlocked and the next AMS sync picks up from zero. **Frontend** adds two affordances: a small eraser icon button on the "Total Consumed" stat card (visible only when there's actually usage to reset AND we're not in Spoolman mode) that opens a confirm modal explaining what the reset clears and that the spools / remaining weights are not changed, and an eraser icon in each table row's action column (visible only on active spools with `weight_used > 0`, hidden in Spoolman mode since Spoolman manages its own usage accounting). Both routes share the same `ConfirmModal` infrastructure as delete/archive — `confirmAction` state now covers `'delete' | 'archive' | 'reset-usage' | 'reset-all-usage'`. **i18n**: 10 new keys (`resetUsage`, `resetUsageTooltip`, `resetUsageConfirm`, `resetAllUsage`, `resetAllUsageTooltip`, `resetAllUsageConfirm`, `usageReset`, `allUsageReset`, `resetUsageFailed`, plus `resetUsage` reused as confirm button label) translated across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). Parity check holds at 4827 leaves per locale. **Tests**: 8 new regressions in `test_spool_reset_usage.py` cover per-spool reset zeroes `weight_used`, per-spool reset does NOT auto-lock, per-spool reset preserves an existing lock, 404 for missing spool, bulk reset zeroes only listed spools (untouched spools keep their usage — the typo-wipe guard), bulk reset rejects empty list (400), bulk reset rejects missing `spool_ids` field (400), bulk reset preserves `weight_locked` across mixed locked/unlocked targets. 4897 backend + 1901 frontend tests green.

### Changed
- **Settings → Filament: "Spool Catalog" now shows the same UI in Spoolman mode as in internal-inventory mode** — Previously, switching to Spoolman mode hijacked the Spool Catalog card and replaced it with a Spoolman filament list (Vendor — Name / Material / Weight / Spool Weight) with inline edit for name + spool_weight. Two separate concepts had been merged into one card: a Bambuddy-local **spool tare catalog** (the actual purpose of the card — name + weight definitions used to compute spool tare) vs a **filament editor** for Spoolman's `Filament` entity. The filament-editor view replaced the spool tare table entirely in Spoolman mode, with no way to see or manage the spool catalog. Now the card always renders the local Spool Catalog (Add / Edit / Delete / Export / Import / Reset / bulk-delete) regardless of inventory mode. The Spoolman-filament inline editor is removed — Spoolman users edit filament name / spool_weight in Spoolman's own UI. Side effect of the rewrite: the noisy `GET /api/v1/spoolman/inventory/filaments → 400 Bad Request` that fired on the Filament settings page even when Spoolman is disabled is gone, because the component no longer issues the probe at all. Files affected: `frontend/src/components/SpoolCatalogSettings.tsx` (rewrite, ~750 → ~445 lines), `frontend/src/components/SpoolWeightUpdateModal.tsx` (deleted — only used by the removed editor), test file rewritten to match the simplified component. No backend changes — `PATCH /spoolman/inventory/filaments/{id}` route still exists for API consumers, just no longer wired to a UI.

### Fixed
- **Stats page widgets now match Quick Stats — every panel reads per-event data (#1390 follow-up, reported by @IndividualGhost1905)** — After #1378 moved Quick Stats and the run aggregates to `print_log_entries`, six widgets (Filament Used, Filament Cost, Filament Trends, Printer Stats By Weight / Time, By Material, Color Distribution) plus Failure Analysis still iterated the archive list. Two divergences fell out of that split. **Reprints**: each reprint of an archive adds a new `print_log_entries` row but the `print_archives` row gets overwritten in place, so event-based widgets counted N reprints while archive-based widgets counted 1. **Hard-deleted archives**: the foreign key is `ON DELETE SET NULL`, so the event survives as an orphan (`archive_id=NULL`) — Quick Stats kept counting it, archive-iterating widgets couldn't see it. The reporter's test server (14 archives / 52 events / 29 orphans confirmed by the diagnostic query) made the split very visible. Fix swaps the data source in two places: (1) `GET /archives/slim` (the only frontend caller is StatsPage, so every widget that consumes the `archives` query gets the per-event data in one step) now reads from `PrintLogEntry`, LEFT JOINs `PrintArchive` for the sliced `print_time_seconds` estimate (null for orphans, and downstream widgets already fall back to `actual_time_seconds` / `duration_seconds`), uses `PrintLogEntry.duration_seconds` as the authoritative measured-time field when present (the original computed-from-started/completed_at path is kept as the fallback so legacy event rows from pre-#1378 still surface time), and returns `quantity=1` per event since per-event semantics make the archive-level quantity multiplier meaningless (verified no StatsPage widget actually reads `quantity` — `grep -n "\\.quantity" frontend/src/pages/StatsPage.tsx` returns nothing); (2) `FailureAnalysisService` switched from `PrintArchive` to `PrintLogEntry` for every aggregation (totals, by reason, by filament, by printer, by hour, recent failures, weekly trend) — `project_id` filtering still resolves through the archive table (events don't carry a direct project link) but counts the matching events, not the archives. The conftest `archive_factory` already synthesizes a matching `PrintLogEntry` per archive (added when #1378 landed), so existing tests stay green; one small tweak there now syncs the synthesized event's `created_at` with the archive's so date-range filtered tests don't lose the event to `server_default=func.now()`. Three new regressions in `test_archives_api.py`: `test_slim_counts_reprints_as_separate_rows` (three reprints → three slim rows → 3× filament summed correctly), `test_slim_includes_orphan_events` (archive deleted, event survives, slim still returns it with `print_time_seconds=null`), `test_failure_analysis_counts_reprints_and_orphans` (a reprint of a failed archive + an orphan failed event both contribute to `failed_prints` and `failures_by_reason`). One existing assertion updated — the `test_slim_returns_only_expected_fields` test was asserting `quantity == 2` from an `archive_factory(..., quantity=2)` call, which no longer rounds-trips through the per-event endpoint; updated to `quantity == 1` with a comment pointing at the semantic shift. 4889 backend tests green, 31 StatsPage frontend tests green, ruff clean.
- **FTP upload no longer silently treats 426 "Failure reading network stream" as success (#1401, second root cause reported by @iitazz)** — Looking at the support bundle from @iitazz showed every FTP upload to their P2S (firmware 01.02.00.00) ending the same way: data channel sendall completes in ~200 ms at an impossibly high "speed" (7+ MB/s for files the printer can only actually receive at ~1–2 MB/s), then voidresp returns `426 Failure reading network stream. (error_temp)` from the printer, and Bambuddy proceeds — `WARNING FTP STOR confirmation not received for X (proceeding): 426 ...` followed immediately by `INFO FTP upload complete`. The print command then gets dispatched, the printer tries to parse what's actually a partial 3MF (the reporter's downloaded-from-printer 3MF was 458752 bytes — exactly `7 × 65536`, our FTP chunk size — for a 668025-byte source), and surfaces the "unable to parse 3mf file" error the reporter sees. Two stacked failures: a P2S firmware / TLS-data-channel quirk that severs the FTP data stream mid-transfer (separate investigation; #1401 doesn't fix that), AND the voidresp handler in `backend/app/services/bambu_ftp.py` swallowing the resulting 426 because the original comment assumed *"the data was fully sent so the file is likely on the SD card"* — true for socket-level timeouts where we just didn't HEAR the 226 in time (H2D needs 30+ s tolerance and we want to keep that), false for `426` where the printer is explicitly telling us *the data stream itself was cut*. Fix splits the broad `except Exception` into two branches: `except ftplib.Error` (covers `error_reply`, `error_temp`, `error_perm`, `error_proto` — the server *responded* with a failure on the control channel) logs at ERROR and re-raises, so the outer `except (OSError, ftplib.Error)` returns False and the dispatcher sees a real upload failure instead of green-lighting a print of a truncated file; `except Exception` keeps the existing proceed-with-warning behaviour for socket timeouts so the H2D 30-second voidresp tolerance survives. Same split applied to `upload_bytes()` since it had the same `except Exception: pass` shape. The reporter will still hit the underlying 426 (we haven't fixed the P2S transport problem yet — that's separate), but they'll now see an upload failure surfaced honestly rather than a confusing parse error 30 seconds into the print attempt. Tests: two new regressions in `TestUpload` patch `_ftp.voidresp` to raise `ftplib.error_temp("426 ...")` and assert both `upload_file()` and `upload_bytes()` return False. 18 upload-related tests green. The earlier-this-section validation fix is unrelated and stays — it still catches genuinely raw `.gcode` files at the upload step.
- **Upload validation rejects unprintable 3MF / raw-gcode files at the upload step instead of letting them fail at the printer (#1401, reported by @iitazz)** — Reporter sliced in OrcaSlicer, uploaded the result to Bambuddy, clicked Print, and the printer rejected with "Printing stopped because the printer was unable to parse the 3mf file" — every time, for multiple files, on both library uploads and SD-card-browsed files. Trace through the support bundle showed: (a) the stored library file ended in `.gcode` (not `.gcode.3mf`), and (b) `background_dispatch.py` constructs the FTP destination filename by appending `.3mf` when the source doesn't already end in `.gcode.3mf` / `.3mf` — so raw gcode gets shipped to the printer named `whatever.gcode.3mf` and the firmware's 3MF parser chokes on the missing zip header. The same shape also manifests as `Failed to parse plates from archive ... File is not a zip file` warnings on Bambuddy's side. Whether the user manually re-extensioned a file or their slicer saved as `.gcode` instead of `.gcode.3mf`, the right place to catch this is the upload, not the printer 30 seconds later. **New `validate_print_file_upload()` helper** in `backend/app/api/routes/library.py` runs two checks: (1) reject any filename ending in `.gcode` (but not `.gcode.3mf`) with a clear message — "Raw .gcode files can't be printed on Bambu printers in network mode — they need a .gcode.3mf zip container (gcode plus metadata). Re-export from your slicer and make sure the file ends in '.gcode.3mf', not just '.gcode'. If your OS hides extensions, double-check the file with the extension visible." (2) For any filename ending in `.3mf` (incl. the compound `.gcode.3mf`), verify the file body starts with `PK\x03\x04` (ZIP magic bytes); reject otherwise with a message pointing at the slicer's "Export Plate Sliced File" action. Suffix-based check rather than `os.path.splitext` because compound extensions like `.gcode.3mf` show up as just `.3mf` after splitext — both must trigger the same validation. **Applied to every relevant upload route**: `POST /library/files` (covers File Manager upload AND the printer-card drag-drop, which routes through the same endpoint), `POST /archives/upload` (single archive), `POST /archives/upload-bulk` (rejects bad files per-row instead of aborting the batch — one bad file in a 10-file drag-drop doesn't lose the other nine), `POST /archives/{archive_id}/source` (per-archive source 3MF), `POST /archives/upload-source` (slicer-post-processing match-by-name). Validation runs AFTER `_resolve_upload_destination` so folder-permission rejections (403 readonly, 400 missing-path, 409 collision) still take precedence — preserves existing error ordering. STL / image / other non-print uploads bypass the validator entirely; Bambuddy is also a library, not just a print dispatcher. **Frontend visibility fix** in `FileUploadModal.tsx` (same component used by File Manager + Printers page + Archives): the modal auto-closed after `setIsUploading(false)` regardless of per-file results, so a 400 rejection from the new validator was technically captured but never shown — the modal vanished too quickly. Now (a) errors render inline as red text under the file row instead of as a hover-only `title` tooltip, and (b) the modal stays open if any file ended with status='error', so the user can read the backend's actual remediation message before clicking Close. The bulk archive `UploadModal.tsx` was already showing inline errors and not auto-closing — that one didn't need the fix. **Tests**: 7 new integration tests in `TestPrintFileUploadValidation` cover: raw `.gcode` rejection at the library route (asserts the error message names the remedy), non-zip `.3mf` rejection, non-zip `.gcode.3mf` rejection (compound-extension code path), happy-path valid `.gcode.3mf` accepted, STL / non-print extensions still bypass, `POST /archives/upload` non-zip rejection, `POST /archives/upload-bulk` per-file error collection with mixed good/bad files in one request. Plus one fixture update in `test_external_folders_api.py` — `test_upload_persists_correct_db_shape` was uploading `model.3mf` with placeholder bytes `b"x"` to exercise the DB-shape path; updated to use a minimal real zip so the new validator doesn't block the unrelated test. 4968 backend tests green, 41 FileUploadModal frontend tests green, ruff + frontend build clean.

### Added
- **Inventory: Storage Location filter chip (#1400, reported by @pgladel)** — Reporter manages a lot of physical filament storage locations and wanted a quick way to narrow the inventory list to "what's in shelf A" / "what's in drawer 1" without typing a search query each time. Inventory page grows a new filter chip alongside the existing Material / Brand / Category / Spool Name dropdowns. Distinct storage-location values are pulled from the spool list and rendered as options; selecting one filters the table to spools assigned to that location. An additional **No location set** entry appears when at least one spool has an empty `storage_location`, so users can find unfiled spools the same way `categoryNone` works for unfiled categories. The chip self-hides when no spool has a storage location set (avoids noise on fresh installs). Pattern is identical to the existing Category chip from #729 — clear-all-filters and `hasActiveFilters` both include the new state. **Whitespace normalisation:** distinct-value extraction and filter comparison both `.trim()` the field so a spool whose location was saved as `"Shelf A "` doesn't render as a separate dropdown option from `"Shelf A"`. **i18n:** reuses the existing `inventory.storageLocation` label (already shipped for the spool-edit field — no duplication); adds a new `inventory.storageLocationNone` key, translated to all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). The "Extended Solution" from the issue (dashboard widget showing locations) is not in this change — open to revisiting if there's appetite. Parity check holds at 4818 leaves per locale. 24 InventoryPage tests in the existing suite still pass.

- **Smart plugs: auto-off after AMS drying completes (#1349, reported by @Kyobinoyo)** — Reporter asked for the equivalent of the existing print-finish auto-off, but triggered when an AMS drying cycle ends — so the smart plug that powers the printer + AMS combo cuts power once humidity has been driven out, without the user babysitting it. Shipped as a simple per-plug pair of fields that mirrors the existing print-finish auto-off shape. Per-AMS plug routing (separate plug for the AMS only, per-AMS targeting on dual-AMS printers) was scoped out for now — Bambuddy's plug model is plug→printer, not plug→AMS, so the trigger fires whenever any AMS attached to the linked printer finishes a dry cycle. **Two new SmartPlug columns** with a same-migration block in `database.py` (SQLite uses `BOOLEAN DEFAULT 0` / `INTEGER DEFAULT 10`; Postgres branches to `DEFAULT false` / `IF NOT EXISTS`): `auto_off_after_drying BOOLEAN` (defaults False so nobody opts in by accident); `off_delay_after_drying_minutes INTEGER` (defaults 10 — separate from the print-finish delay because the AMS chamber is hot post-cycle and users often want longer cooldown than the print-finish default of 5). **Trigger** is observed at the MQTT layer, not the scheduler — `BambuMQTTClient` now keeps a per-AMS `_previous_dry_times: dict[int, int]` and, every time `_handle_ams_data` finalises the merged AMS list, walks each unit looking for the `dry_time > 0 → 0` falling edge. When it fires, the new `on_drying_complete(ams_id)` callback runs, plumbed through `PrinterManager.set_drying_complete_callback` exactly the way `on_print_start` / `on_print_complete` already are. The seed-from-zero false positive (first MQTT push reports `dry_time=0` and the previous would otherwise read as 0→0) is guarded by the explicit `previous > 0` check, and the per-AMS state means dual-AMS printers can finish drying on AMS 0 and AMS 1 independently without the second one missing the edge. Observing the falling edge at the MQTT layer (rather than in `print_scheduler._sync_drying_state`) is deliberate: the scheduler's `_drying_in_progress` dict only tracks auto-drying initiated by the scheduler itself, so manually-triggered drying from the printer card would not fire there. The new path catches queue-triggered, ambient, AND manual drying identically because it observes firmware-reported state, not our own intent. **Manager hook** in `SmartPlugManager.on_drying_complete(printer_id, db)` mirrors `on_print_complete` but reads the drying-specific toggle, calls `_schedule_delayed_off` with `off_delay_after_drying_minutes` (always time-based — temperature-cooldown is meaningful for the printer hotend, not the AMS chamber, and Bambuddy doesn't track AMS chamber temperature). The HA-script guard from the print-finish path is preserved (scripts can be triggered but not turned off, so they're skipped). **Frontend** adds a single toggle + delay input on the Smart Plug card next to the existing "Auto Off" section: "Auto Off After Drying" and "Drying delay (minutes)". No changes to the Add Smart Plug modal beyond what the new fields require. **Backend tests** in `test_smart_plug_manager.py` cover the new shape: drying auto-off schedules with the correct per-plug delay; the toggle being off is a no-op even when `auto_off` (print-finish) is on; the master `enabled` flag still gates; HA script entities are skipped; printer with no linked plugs is a silent no-op. `test_bambu_mqtt.py` gets a new `TestDryingCompleteCallback` class covering the falling-edge firing once, the seed-from-zero non-fire guard, repeated zero-pushes after the edge not refiring, per-AMS independent tracking on dual-AMS units, and the "new cycle after completion refires" case (covers the user starting a second dry from the printer card). 4961 backend tests green; SQLite + Postgres 16 migration verified idempotent. **i18n**: 3 new keys (`autoOffAfterDrying`, `autoOffAfterDryingDescription`, `delayAfterDryingMinutes`) translated across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). Parity check holds at 4817 leaves per locale.

### Changed
- **Bulk and scheduled archive purge now honour the soft / hard delete choice that single-archive delete already exposes (#1390 follow-up)** — Reporter IndividualGhost1905 followed up after the #1378 / #1343 backfill fix landed and pointed out the next inconsistency: the per-archive delete dialog has had a "Also remove from Quick Stats" checkbox since #1343, but the bulk "Purge Old" button and the scheduled daily auto-purge sweeper both ignored that choice and hard-deleted unconditionally. The "Purge Old" path called `archive_purge_service.purge_older_than` which routed through `ArchiveService.delete_archive` directly — dropped the archive row, the linked PrintLogEntry rows got `ON DELETE SET NULL` so they survived with `archive_id=NULL`, Quick Stats kept the filament / cost / energy contribution from the orphaned log rows but the archive-list-iterating widgets (Filament Trends / Printer Stats / By Material / Color Distribution) lost the contribution and Time Accuracy lost the join target. Visibly inconsistent, and "automatically deleted from statistics without any warning" was a fair characterisation of the half that did drop. Fix is to thread the same `purge_stats` parameter through every surface, defaulting to soft-delete (matches the single-archive default — files off disk, archive row hidden via `deleted_at`, Quick Stats fully preserved, all archive-list widgets keep showing the row). Three surfaces affected: (1) `POST /archives/purge` accepts `purge_stats` in the body, defaults False (soft); the response now echoes which mode ran. (2) `GET /archives/purge/preview` accepts the same flag as a query param so the count matches what a real purge would touch — soft mode excludes already-soft-deleted rows, hard mode counts them as eligible-for-promotion. (3) The auto-purge `archive_auto_purge_stats` setting (default False) controls whether the daily sweeper runs in soft or hard mode; the existing `_maybe_run_auto_purge` reads it on every tick. `ArchivePurgeRequest` / `ArchivePurgeSettings` schemas extended, `archive_purge_service.purge_older_than` and `preview_purge` take `purge_stats=False` kwarg, the existing single-row delete tests pass unchanged. Frontend: "Purge old archives" modal grew a checkbox below the preview ("Also remove from statistics" with a hint explaining the difference), and the Settings → Archives auto-purge card grew the matching toggle (disabled when auto-purge itself is off). Copy in the modal rewritten across all 8 locales to reflect that the default no longer "permanently removes from the database" but instead hides + removes files while keeping Quick Stats intact. **Behaviour change for existing auto-purge users:** the sweeper used to hard-delete by default and now soft-deletes by default. After the upgrade, existing auto-purge users will start *preserving* more data in Quick Stats rather than losing it — the safer direction of the two, but call it out. Users who want the old hard-delete behaviour can tick the new toggle once. 4 new integration tests in `test_archive_purge_api.py` pin the new contract: manual purge soft-deletes by default, manual purge hard-deletes when `purge_stats=true` body flag is set, auto-purge soft-deletes by default, auto-purge hard-deletes when the settings opt-in. Existing throttle/disabled tests still pass. 11 tests total in the file, all green; 4951 in the full backend suite. i18n parity check clean across all 8 locales.
- **Cloud login: corrected the access-token hint to reflect that Bambu Lab no longer surfaces the token in any UI, and called out the China-region constraint explicitly (#1396)** — Reporter wintsa123 filed that China-region users can't log into Bambuddy. The code path itself is fine: PR #1013 (April) already added the China-region selector to the login form and routes token validation to `api.bambulab.cn`. The actual gap was documentation. The old in-app `accessTokenHint` said "Paste your Bambu Lab access token (from Bambu Studio)" — but Bambu Studio never exposed the token in any UI, and the profile page on `bambulab.com` that used to show it is gone. For China-region accounts the email/password flow is fundamentally unusable because those accounts are bound to phone numbers, not email — token login is the only path, and the hint didn't say so. Updated `accessTokenHint` in all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW) to state that China accounts must use this path and point at the wiki for the MakerWorld-cookie retrieval procedure. Wiki page `features/cloud-profiles.md` also rewritten under "Access Token Login": adds a "Region: China must use token login" note, replaces the dead "from Bambu Studio" guidance with the working MakerWorld-cookie method (browser DevTools → Application → Cookies → `token`), keeps the Python-script alternative for global-region accounts, and flags that the cookie value is sensitive. No backend changes — the token-validation endpoint accepts both `global` and `china` regions and routes to the right API host already.

### Fixed
- **Virtual Printer (queue / immediate / review modes): AMS data flickered or disappeared in BambuStudio between pushalls on P1S/A1 targets (#1387)** — Reporter vmhomelab ran a Print Queue VP against a P1S, opened BambuStudio, and saw the External Spool only — no AMS. Toggling Auto-Dispatch (which triggers a VP restart) made AMS briefly appear, then it reverted to defaults. Proxy Mode worked fine. The earlier #1371 sticky-keys fix only handled one of two Bambu firmware incremental-push shapes: it preserved cached AMS when the incoming push *omitted* the `ams` key entirely (H2D's common incremental shape). The reporter's P1S firmware (01.09.01.00) instead sends incrementals with the `ams` key present but the inner `ams.ams` array stripped — `{ams_status: 1, humidity: 2}` instead of `{ams: [...], ams_status: 1}`. To the previous sticky-keys check that read as "key present, leave new state alone," so the bridge cache got overwritten with the stripped blob; the slicer's next 1 Hz read saw `ams` with no unit list and fell back to the "no AMS" default render. Toggling Auto-Dispatch restarted the VP and got a fresh pushall in; the next P1S incremental stripped it again. (H2D rarely hits this — its incrementals typically don't carry `ams` at all, so #1371 alone was enough there. The reporter's same-VP-architecture pinging both an H2D and a P1S would observe the H2D works while the P1S doesn't, which is exactly the split that surfaced this.) Fix is a deep-merge applied to the `ams` key inside the bridge cache, mirroring the structure Bambuddy itself already does in `bambu_mqtt.py::_handle_ams_data` (which is why Bambuddy's own AMS display stays coherent on the same firmware): scalar fields like `ams_status` and `humidity` take the new value, but the `ams.ams` array is merged unit-by-unit on `id`, each unit's `tray` array is merged tray-by-tray on `id`, and units / trays the incremental doesn't mention survive intact from the cached full state. A tray-targeted incremental during a print like `{ams: [{id: 0, tray: [{id: 0, state: 11}]}]}` now updates that one tray's state without nuking the other three trays' tray_type/tray_color. Helper added as `_merge_ams_dict` in `backend/app/services/virtual_printer/mqtt_bridge.py` next to `_ip_to_uint32_le`, called from the existing sticky-keys block. Three new regression tests under `TestPushStatusCache` in `backend/tests/unit/test_vp_mqtt_bridge.py` cover the status-only partial (the reporter's exact reproduction), the multi-AMS unit-level merge, and the multi-tray merge. The existing `test_incoming_ams_update_replaces_cached_ams` still passes — fresh full updates still take effect, the merge only protects the cache from stripped incrementals. 32 tests total in that file, all green. Verified the cross-subnet topology from the report (printer / Bambuddy / slicer each on a different /24) is incidental: the symptom is the same regardless of subnet once the partial-shape arrives; the latency just makes the "empty cache when slicer first connects" race more visible. ProxyMode is unaffected because Proxy is raw byte-forwarding rather than a cached-as-base mirror — it never had this class of bug.
- **Quick Stats showed Filament Cost = 0 and empty Time Accuracy on pre-upgrade data after the 0.2.4.1 stats rewrite (#1390)** — Reporter IndividualGhost1905 upgraded to 0.2.4.1 (which shipped the per-event aggregation rewrite from #1378) and saw the Stats page split between consistent values (Total Prints / Print Time / Filament Used / Energy / Success Rate matched the archive list) and zero-or-empty ones (Filament Cost, Time Accuracy). Inconsistency was a migration gap: #1378 added six columns to `print_log_entries` — `archive_id`, `cost`, `energy_kwh`, `energy_cost`, `failure_reason`, `created_by_id` — but **didn't backfill any of them**. So every pre-upgrade log entry kept NULL on all six. The new Quick Stats query sums `PrintLogEntry.cost` (gets 0 for legacy data); the time-accuracy query joins `PrintArchive ON archive_id` (drops every legacy run from the average). Counts and per-row fields that already existed pre-#1378 (`status`, `duration_seconds`, `filament_used_grams`) kept working — which is why some panels looked right and others didn't. Fix is a two-step backfill in `run_migrations` next to the existing column-add block (DML, runs inside `begin_nested()` not `_safe_execute` since the latter is documented "DDL only"): step 1 links each orphan log entry to its archive via `print_name + printer_id` (highest archive `id` wins on tiebreak — newest matches the overwrite-then-stop shape that pre-#1378 reprints left behind); step 2 copies `archive.cost / energy_kwh / energy_cost` onto the latest matching log entry per archive, **but only for archives where no log entry yet carries a cost**. That second clause is the idempotency anchor and also the double-count guard for users running this migration after #1378 has already written cost-bearing rows for new runs — those archives are left untouched. Earlier reprints stay NULL, matching the "first/latest writes, rest stay NULL" convention #1378 introduced. Sum across the legacy reprint chain reproduces sum-of-archive-cost exactly, so the Quick Stats Filament Cost column matches the pre-upgrade total instead of dropping to zero. SQL is plain ANSI — correlated UPDATE with `LIMIT 1` in the SET subquery, `WHERE id IN (SELECT MAX(id) ... GROUP BY archive_id HAVING SUM(CASE WHEN cost IS NOT NULL THEN 1 ELSE 0 END) = 0)` — verified end-to-end on both SQLite (4 unit tests in `test_print_log_backfill_migration.py`) and `postgres:16-alpine + asyncpg` (live container reproduction). For the other widgets the reporter listed (Printer Stats, Filament Trends, By Material, Success by Material, Color Distribution) — those still iterate the archives list on the frontend rather than calling /stats, so they read consistent pre-upgrade data and aren't part of this fix; the inconsistency the reporter saw between Quick Stats and those widgets resolves itself once the backfill brings Quick Stats in line.
- **Spoolman: spool "Color Name" edits silently never saved — Bambuddy was writing to a field Spoolman doesn't have (#1357)** — Reporter pgladel edited a spool's Color Name in Spoolman mode, hit Save, and saw the value snap back to the subtype on the next read. Martin shipped #1319 in May to handle "form round-trips the synth value back as if it were user input" — that fix's read/form-prefill half was correct (the `color_name_is_synthesized` flag, the blank-on-synth form init), but the **write half assumed Spoolman has a `color_name` field on Filament**. It doesn't. Verified against the live `FilamentUpdateParameters` schema on Spoolman 0.23.1: `name`, `vendor_id`, `material`, `price`, `density`, `diameter`, `weight`, `spool_weight`, `article_number`, `comment`, `settings_extruder_temp`, `settings_bed_temp`, `color_hex`, `multi_color_hexes`, `multi_color_direction`, `external_id`, `extra` — that's the lot. No `color_name`. Spoolman's PATCH happily returns 200 for `{"color_name": "Red"}` and just **silently discards the unknown key**. So `find_or_create_filament` was either patching a void or creating filament after filament with the same field-that-doesn't-stick (which is what produced the reporter's "BB also created a bunch of new filaments" trail of duplicates on each save attempt). The fix takes the same route as the existing BambuStudio slicer-preset storage: persist color_name on `spool.extra.bambu_color_name` as a JSON-encoded string, register the extra field via `ensure_extra_field` before write (Spoolman 400s on unknown extra keys), and read it back in `_map_spoolman_spool` with priority `spool.extra.bambu_color_name → filament.color_name (forward-compat for any future Spoolman release that adds it) → subtype synth`. Also dropped the now-dead `color_name` passing through `find_or_create_filament` and `create_filament` — Spoolman would discard it anyway and keeping the dead pipe risked the same confusion the next time someone reads this code. The previous "match by name then patch color_name" loop is gone; what survives is the name-match resilience added earlier this turn so an AMS-sync-created filament named `"Glow"` still matches the user-driven edit's composed `"PLA Glow"`, which prevents the duplicate-filament trail. The frontend form's `color_name_is_synthesized` handling is unchanged — that part already worked. Tests rewritten across the three affected suites (`test_spoolman_inventory_methods.py`, `test_spoolman_inventory_helpers.py`, `test_spoolman_inventory_api.py`) to pin the new contract: filament patch never carries `color_name`, route writes to `bambu_color_name` extra, read prefers extra over filament-field over synth. Verified end-to-end against the live Spoolman instance at the reporter's setup (PATCH /filament with color_name → field absent from response; PATCH /spool with extra.bambu_color_name → field present in response).
- **Add Smart Plug (HA mode) — search dropdown let users pick entities the schema would reject, surfacing as a cryptic regex error on Save (#1388)** — Reporter MartinNYHC opened the Add Smart Plug dialog, typed a search prefix matching a multi-entity HA device (a Shelly-style outlet exposing one `switch.*` and several `sensor.*` / `binary_sensor.*` siblings under the same friendly-name prefix), clicked one of the entities, filled in the optional power/energy sensors, and clicked Save. The backend returned 422 with the raw Pydantic message `String should match pattern '^(switch|light|input_boolean|script)\.[a-z0-9_]+$'`. After the dropdown closed and the search cleared, the entity-list refetch (with no search param) returned the default-domain-filtered list — which didn't include the user's pick — so `selectedEntity = haEntities.find(...)` was undefined, the field rendered as visually empty (placeholder shown), but `haEntityId` still held the bad value the user had selected. Root cause was at `backend/app/services/homeassistant.py::list_entities`: when a search query was present, the function bypassed the domain filter entirely and returned matches across every HA domain — including ones the `SmartPlugBase.ha_entity_id` regex at `backend/app/schemas/smart_plug.py:17` could never accept. Offering a clickable choice the user can't save is broken UX; the fact that the error message then said `switch|light|input_boolean|script` made it look like a schema problem rather than a search-permissiveness problem. Fix: the allowed-domains filter (`{"switch", "light", "input_boolean", "script"}`, kept in sync with the schema regex) now always runs, and search composes on top of it as an additional substring match against `entity_id` or `friendly_name`. Whitespace-only search strings are treated as no search. Verified the smart-plug code path is unchanged between 0.2.4 and 0.2.4.1 — this bug was latent since the script-domain commit in February 2026 and was only noticed now because the reporter hadn't reopened the modal in months. 5 new regression tests in `backend/tests/unit/services/test_homeassistant_list_entities.py` cover the no-search baseline, the search-still-domain-filters case (the actual #1388 reproduction), the entity_id-or-friendly_name substring match, case-insensitivity, and the whitespace-only edge case.
- **H2S with no AMS could not start a print — firmware rejected the dispatch with `07FF_8012` "Failed to get AMS mapping table" (#1386)** — Reporter krootstijn (H2S + no AMS) clicked Print and got an immediate firmware error. Two stacked misclassifications had quietly added H2S to the dual-nozzle code paths over time. The first was in `start_print_job` at `backend/app/services/bambu_mqtt.py:3168` — the `is_h2d` flag was set true for `("H2D", "H2D PRO", "H2DPRO", "H2C", "H2S", "X2D")`. That single flag controlled both the firmware bool→int format (legitimately needed for the whole H-family) *and* the external-spool routing branch (`ext_ams_id = tray_id if is_h2d else 255`) which is only correct for actual dual-nozzle printers. With no AMS, the external-spool sentinel is `254`; the dual-nozzle branch wrote `ams_id=254` into `ams_mapping2` instead of the canonical `255`. The exact failure shape (`07FF_8012`) is even called out in the comment six lines above the bad line — H2S was getting routed straight into the path the comment warned against. The second misclassification was the use_ams=False fallback at `bambu_mqtt.py:3213` (`if ams_mapping and use_ams and not is_h2d`) — meant to skip the safety drop on dual-nozzle printers where `use_ams` controls nozzle routing — also skipped H2S, so the firmware never got a chance to fall back to external-spool mode. A third site at `bambu_mqtt.py:3987` (and its sibling at `backend/app/api/routes/kprofiles.py:119`) classified dual-nozzle by serial prefix `("094", "20P9", "31B8B")`, which is wrong because H2S shares prefix `094` with H2D. Fix splits the conflated flag into two: `is_h_family` (firmware-format gate, includes H2S) and `is_dual_nozzle` (routing/use_ams gate, excludes H2S; prefers the runtime `_is_dual_nozzle` flag set from `device.extruder.info` and falls back to model name for the brief window right after connect). The K-profile delete and the edit route now use the same two-source check instead of the serial prefix. Empirically verified across 9+ stored H2S support bundles (`nozzle_count: 1` in every one) and the reporter's bug log (`07FF_8012` immediately after dispatch). Four new regression tests: `test_h2s_single_external_spool_uses_main_id`, `test_h2s_no_ams_forces_use_ams_false`, `test_h2s_keeps_integer_format_for_calibration_fields`, plus a new `test_h2s_uses_single_nozzle_format` in the K-profile suite. The K-profile detection tests were also updated to set both model name and runtime flag rather than relying on serial prefix, since the source-of-truth has shifted.

## [0.2.4.1] - 2026-05-16

### Added
- **Docker: opt-in system trust store for self-signed CA certificates (#1431, contributed by @WizBangCrash, requested in #1289)** — Reporter runs a private LAN with self-signed certificates for internal HTTPS endpoints (his Home Assistant instance being the canonical case) and wanted Bambuddy to trust those CAs without disabling TLS verification end-to-end. Bambuddy talks to Home Assistant via `httpx.AsyncClient` (`backend/app/services/homeassistant.py:46`) with default `verify=True`, which under httpx 0.28 means "use `certifi`'s CA bundle and nothing else" — so manually copying a CA file into the container had no effect. **The fix is opt-in and container-side only**: setting `USE_SYSTEM_TRUST_STORE=<any non-empty value>` in the compose `environment:` block, combined with mounting the user's CA file(s) into `/usr/local/share/ca-certificates`, makes the entrypoint run `update-ca-certificates --fresh` at startup and `export SSL_CERT_DIR=/etc/ssl/certs`. httpx 0.28 explicitly honours that env var (`_config.py`: `ssl.create_default_context(capath=os.environ["SSL_CERT_DIR"])`), and `update-ca-certificates` populates `/etc/ssl/certs` with the **Debian system CA bundle** (Let's Encrypt, DigiCert, GlobalSign, etc.) **plus** the user-mounted CAs — so standard endpoints (api.github.com, MakerWorld, Bambu Cloud) keep working alongside the user's self-signed CA. The `ca-certificates` apt package is added to the Dockerfile so `update-ca-certificates` exists in the image. The feature is **default-off** — when the env var is unset the entrypoint logs a one-line "skipping system trust store update" and goes straight to the existing PUID/PGID chown path, so non-users see zero behaviour change. **Fail-fast on misconfig**: if `USE_SYSTEM_TRUST_STORE` is set but the container is running as non-root (the entrypoint can't write `/etc/ssl/certs` without root), or `/usr/local/share/ca-certificates` has no `.crt` files mounted, or `update-ca-certificates` is missing from the image, or the trust-store rebuild itself fails, the entrypoint exits 1 with a clear error message rather than silently succeeding and leaving the user wondering why their HA connection still rejects the cert. **Compose template update**: `docker-compose.yml` ships commented-out examples for both the volume mount (`/path/to/certs:/usr/local/share/ca-certificates`) and the env var (`USE_SYSTEM_TRUST_STORE=true`) so the path from "I have a self-signed CA" to "Bambuddy trusts it" is two uncommented lines. **Caveat worth flagging in docs**: the feature requires the container to start as root so the entrypoint can run `update-ca-certificates`; users who pin `user: "1000:1000"` in compose get the clear "not running as root" exit with the reason, but they need to switch to the default PUID/PGID-style invocation to use this. Companion wiki PR documents the setup walkthrough at maziggy/bambuddy-wiki#31. Hardware-only path (shell entrypoint change) so no automated test — verified by the reporter's local install. Post-merge polish: the fatal-exit branch's log line was relabeled from "warning: update-ca-certificates failed:" to "error: update-ca-certificates failed" to match severity and the surrounding error messages.

- **Print labels: sort by colour as an alternative to spool-ID order (#1410, requested by @elit3ge)** — Reporter asked for an option to order the printed label sheet by colour instead of spool number so a multi-colour roll of Avery sheets / box labels groups related colours together physically. The label-render backend (`labels.py`) already honoured caller order — both `POST /inventory/labels` and `POST /spoolman/labels` preserve the order of `spool_ids` in the request body and pass it straight to the PDF renderer — so the fix is frontend-only. `LabelTemplatePickerModal` gains a small `sortMode` toggle ("By ID" / "By colour") rendered as a chip pair next to the material-filter row. The "by colour" mode converts each spool's `rgba` to HSL and returns a `[bucket, position]` sort key: chromatic colours (saturation ≥ 0.1) go in bucket 0 ordered by hue 0..360 so the sheet reads as a continuous rainbow; achromatic colours (greys, blacks, whites, plus missing/invalid rgba) go in bucket 1 ordered by lightness so the neutrals trail the rainbow black → white. Multi-colour spools sort on their primary `rgba` — the secondary `extra_colors` stripe still renders on the printed label but doesn't drive the sort, since multi-tone sorting would need a perceptual-distance model the use case doesn't justify. Stable tiebreaker on spool ID keeps identical-colour spools in a deterministic order across renders. The previous `[...selectedIds].sort((a, b) => a - b)` at submit time was forcing every PDF to ID order regardless of any frontend sorting — that's been replaced with `sortedSpools.filter(s => selectedIds.has(s.id)).map(s => s.id)` so the visible order flows through to the wire. Session-only state — toggle resets to "By ID" each time the modal opens, no persisted setting (label printing is a rare action and the user picks what they want every time). i18n: 3 new keys (`inventory.labels.sortBy.{label, id, color}`) translated across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW); parity check holds at 4852 leaves per locale. Tests: two new in `LabelTemplatePickerModal.test.tsx` — one asserts the "By colour" toggle reorders the submit payload to `[Red, Ivory, Blue, Black]` (hue 0° / 33° / 240° then neutral with lightness 0) using the existing 4-spool fixture, the other guards the default "By ID" path so adding the toggle didn't quietly regress users who never click it. 17 modal tests green; frontend build clean.

- **Camera: in-app diagnostic for "Connection lost" (#1395 follow-up)** — Second step of the camera architecture overhaul. When the camera viewer hits its error state, a new **Diagnose** button next to **Retry** runs a staged check against the printer and renders the result inline: which stage failed, how long it took, and a translated remediation hint. Cuts off the "user opens a 'camera broken' ticket → wait days → ask for the support bundle → finally figure out it was their reverse proxy / LAN-only toggle / wrong access code" loop at the user's screen. **Backend** ships `backend/app/services/camera_diagnose.py` (orchestrator) and a new `POST /printers/{id}/camera/diagnose` route in `camera.py`. Stages: (1) `tcp_reachable` — opens a TCP socket to the camera port (322 RTSPS / 6000 chamber image) with a 3-second timeout; distinguishes timeout (`tcp_timeout` → "printer not reachable, check IP/network/power") from refused (`tcp_refused` → "camera port closed, check LAN-only and developer mode") from host-unreachable (`tcp_unreachable` → "printer not reachable"). (2) `first_frame` — captures one JPEG end-to-end via the existing `capture_camera_frame_bytes` pipeline (15-second timeout, same code that powers `/camera/snapshot`); auth, RTSP handshake, and first keyframe collapse into one stage because the user-facing answer is the same regardless of which sub-layer failed. **Live-stream shortcut**: when a viewer is currently watching the printer's camera AND the buffered last-frame timestamp is fresher than 10 seconds, the diagnostic skips the real test and returns `live_stream_active_healthy` — opening a fresh socket would kick the live viewer off on single-camera-connection firmwares (the #1348 reconnect-storm trigger), so we trust the real-world evidence instead. Response includes structured metadata for support triage: `protocol` (rtsp / chamber_image), `port`, `profile` (`default` or the model name with an override — currently only `P2S`), per-stage duration in ms, and the machine-readable summary code. **Frontend** adds `CameraDiagnoseModal.tsx` that fires the API call on mount, renders one row per stage with green-check / red-X / grey-skipped icons, and shows the summary remediation message in a bordered banner styled by overall status. The metadata line at the bottom (protocol / port / profile) lets support triage ask "what does your modal say?" instead of "send the support bundle". A **Run again** button re-runs the diagnostic without dismissing the modal. **EmbeddedCameraViewer** error state grows the Diagnose button (kept "Retry" as the primary action; Diagnose is the escape hatch for users who can't see what's wrong). A small stethoscope icon also lives in the viewer's always-visible control bar between **Refresh** and **Fullscreen**, so pre-flight testing ("did my firmware update break the camera?", "is the camera up before I send a print?") doesn't require waiting for the stream to fail first. Also lifted the previously-hard-coded "Camera unavailable" / "Retry" strings into `camera.unavailable` / `camera.retry` so the error UI is properly translated alongside the new keys. **i18n**: 16 new keys (`unavailable`, `retry`, plus `diagnose.{button,modalTitle,running,runFailed,retry,stage.*,summary.*,meta.*}`) translated across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). German "Diagnose" is a real cognate — added to `IDENTICAL_TO_EN_ALLOWED.de` rather than translated to a synthetic. Parity check holds at 4849 leaves per locale. **Tests**: 11 backend unit tests in `test_camera_diagnose.py` cover the live-stream shortcut (skip when fresh, run when stale), the three TCP failure modes (timeout / refused / OSError) → distinct summary codes, the first-frame stage (no-frame and capture-exception cases), the all-OK path, and the result metadata (P2S → P2S profile / rtsp / 322; A1 → default / chamber_image / 6000; X1C → default / rtsp / 322). 1 backend integration test pins the route's response shape end-to-end. 3 frontend tests in `CameraDiagnoseModal.test.tsx` (mounted → API call, failure → translated remediation, Run again → re-call). 5021 backend tests + 1905 frontend tests green; ruff clean; build clean; i18n parity clean.

### Changed
- **Inventory: AMS Filament Label Holder presets fixed and split into "small" and "large" variants (#1426, reported by @bsaunder)** — Reporter (the same person who originally requested the labels feature in #809) discovered that the `ams_30x15` preset's 30×15 mm dimension didn't fit any documented variant of MakerWorld model 752566, despite the preset advertising itself as designed for it. Two new presets replace it: `ams_holder_74x33` (matches the printable label STL bundled in the project) and `ams_holder_75x55` (fits the cardstock-insert variant the reporter validated as "fits perfectly"). Both land in the roomy-layout branch (swatch + QR + multi-line text with brand / material / hex / spool ID) because the height crosses the 20 mm threshold — so the larger AMS holder labels carry the QR code back to `/inventory?spool=<id>` that the old 30×15 preset couldn't fit. The 30×15 preset is removed entirely; no DB migration needed because the preset name was never persisted (label printing is a one-shot action and the picker defaults to nothing). The legacy tight-layout code path in `_draw_label_tight` is kept as the safety branch for any future ultra-small preset (no shipped template uses it now). **API change**: `POST /inventory/labels` and `POST /spoolman/labels` accept `template` values `ams_holder_74x33` and `ams_holder_75x55` instead of `ams_30x15`. The Literal types in `backend/app/api/routes/labels.py` and `frontend/src/api/client.ts::SpoolLabelTemplate` reject the old value at validation time, so any caller still scripting `ams_30x15` gets a 422 with a clear "valid values" message. i18n: replaced `inventory.labels.templates.ams.{label,hint}` with `inventory.labels.templates.amsHolderSmall.{label,hint}` and `inventory.labels.templates.amsHolderLarge.{label,hint}` — real translations across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW), the English-fallback strings on the old key are gone (`feedback_translate_dont_fallback` rule). Parity check passes at 4856 leaves per locale. Tests: `test_label_renderer.py::ALL_TEMPLATES` updated and the AMS-specific render test pins the small variant; `test_labels.py` integration test covers both new presets end-to-end; `LabelTemplatePickerModal.test.tsx` updated to expect 6 template buttons in the grid (was 5), pin the new `ams_holder_75x55` template value in the API call assertion, and verify both AMS variants are disabled when no spools are selected. 35 affected backend tests + 17 frontend modal tests green; full suite 5035 green; ruff clean; frontend build clean.

### Fixed
- **Archives: "Scan for timelapse" no longer permanently disabled on VP-queue-dispatched prints (#1403 follow-up, reported by @pwostran and @enjoylifenow)** — Reporters dispatched a print from a slicer via the VP print queue, the printer recorded the timelapse to its SD card (visible and downloadable via Bambuddy's file browser), but the archive UI's "Scan for timelapse" and "View Timelapse" actions stayed greyed out forever. Frontend gates both on `archive.printer_id` (`ArchivesPage.tsx:459`); backend `/archives/{id}/timelapse/scan` also 400s when the archive has no `printer_id`. Root cause was in `main.py::on_print_start`'s expected-archive branch: VP-queue archives are created with `printer_id=None` at queue-add time (we don't yet know which printer will run the job — the scheduler decides later for "Any P1S"-style queue items, and even for explicit-printer queue items the archive is created before dispatch). When the print actually starts and `on_print_start` looks up the expected archive via `_expected_prints`, the branch updated `status`, `started_at`, and `subtask_id` but never assigned `printer_id`. So the archive stayed `printer_id=None` for the entire print and forever after — and every downstream UI / API path gated on it (timelapse scan + view, the printer filter on Archives, per-printer stats, success-rate cohort attribution) treated the archive as "unassigned." One-line fix in the expected-archive branch sets `archive.printer_id = printer_id` when they differ, guarded against clobbering an already-correct value so library-file-based queue items (which create their archive with the printer pre-assigned at dispatch time) are unaffected. Two regressions in a new `test_print_start_assigns_printer_id_to_vp_archive.py`: `test_expected_archive_path_assigns_printer_id_when_unset` (VP-queue archive with `printer_id=None` → promoted to the running printer) and `test_expected_archive_path_preserves_existing_printer_id` (library-file archive with `printer_id=7` stays at 7 when the same printer runs it — the branch is idempotent on correct data). The 2 existing `test_layer_timelapse_expected_archive.py` tests + 19 `test_print_start_expected_promotion.py` regressions still green — the expected-archive branch's other side-effects (timelapse session, AMS mapping, status/started_at promotion) are unchanged. 5033 backend tests + ruff clean. **Note about the queue-mode slicer-inheritance path itself**: pwostran's specific complaint that the original #1403 fix "didn't work" was a misdiagnosis on his end — his support bundle proves Bambuddy correctly sent `timelapse: true` to the printer and the printer recorded the video; his actual gap was this archive-attachment bug. The slicer-inheritance branch added in #1403 is a no-op for OrcaSlicer's "Send to print queue" flow because Orca only does the FTP upload and never sends a `project_file` MQTT command at upload time — so the path falls back to `default_*` settings, which is the operative path for that workflow. Users who want a different per-print value still edit the queue item before starting (as pwostran did, which is why his dispatch carried `timelapse: true`).

- **SpoolBuddy: NFC reader works again on Raspberry Pi 5 (#1424, reported by @flom89)** — Reporter on a Pi 5 installed SpoolBuddy successfully but couldn't talk to the PN5180 NFC module (the gauge worked, so SPI hardware and wiring were fine). Manually commenting out `self._spi.no_cs = True` in the daemon restored communication; reporter wasn't sure whether removing it would regress Pi 4 installs. Root cause: Pi 5 uses the new RP1 southbridge and its kernel SPI driver (`spi-rp1`) doesn't accept the `SPI_NO_CS` ioctl the same way the historical Broadcom driver on Pi 4 did — setting `no_cs = True` on Pi 5 either errors out or silently leaves the bus in a state where transfers don't complete. **Safe to drop Pi-wide, not just Pi 5** — SpoolBuddy's PN5180 NSS line is wired to GPIO23 (manual chip-select handled by `_cs_low()` / `_cs_high()` around every transfer, because the kernel's default 5µs setup / 100µs hold timing doesn't meet the PN5180's spec). The hardware CE0 line (GPIO8) is not connected to the reader, so whether the kernel auto-toggles it during `xfer2()` is electrically invisible to the PN5180. The `no_cs = True` call was a "be polite to the bus" gesture that was always cosmetic on this hardware. Fix wraps the assignment in `try / except OSError` in both `spoolbuddy/daemon/pn5180.py` (logs at debug level) and `spoolbuddy/scripts/read_tag.py` (silent — it's a diagnostic script with no logger). Try/except over a hard delete because Pi 4 installs that work today shouldn't see any behaviour change. README updated at `spoolbuddy/README.md:23-28` to drop the "spidev.no_cs = True resolves this" sentence in favour of explaining that manual CS via GPIO23 carries the timing on its own and that Pi 4 + Pi 5 are both supported. Hardware-only path so no automated test — verified by the reporter's bench test that commenting the line out restores reads. Ruff clean.

- **Cover thumbnails: stop hammering FTP and GitHub when a print's 3MF isn't on the printer (#1420, reported by reporter)** — Reporter on a P2S running 0.2.4.1 saw two log-flooding bugs trigger together once they started a print whose 3MF wasn't on the printer's FTP storage (typical SD-card-only print). **(1) Cover endpoint had no negative cache.** `GET /printers/{id}/cover` cached successful 3MF thumbnail downloads in `_cover_cache` keyed by `(subtask_name, view_key)`, but never recorded failures. When all 8 candidate FTP paths returned `550 Failed to open file`, the endpoint raised 404 without remembering that it just tried — and since `cover_url` stays populated on every `PrinterStatus` response while state is RUNNING/PAUSE, every React-Query refetch and every component remount drove the frontend to re-fetch, replaying the same 8-path FTP fan-out roughly every few seconds. On the user's hardware the printer's single FTP socket was so busy with these doomed retries that it surfaced as camera-stream symptoms ("ffmpeg didn't terminate gracefully"). Fix adds a parallel `_cover_404_cache: dict[int, set[tuple[str, str]]]` that records the same `(subtask_name, view_key)` key on every 404 path — both the all-FTP-paths-failed branch and the 3MF-has-no-thumbnail-inside branch. On the next call for the same key, the endpoint short-circuits to 404 before even consulting FTP. The negative cache is cleared in `clear_cover_cache()` alongside the positive cache, which `main.py::on_print_start` already calls — so when the next print starts (different subtask, or same subtask after a re-upload of a new file) Bambuddy retries fresh. **(2) GitHub update-check had no backoff on 403 rate-limit.** Once `api.github.com` returned `403 rate limit exceeded` (typical when multiple Bambuddy instances or other tools share a NAT'd source IP and exhaust the unauthenticated 60-req/hr quota), the next call hit GitHub again immediately. Fix adds module-level `_github_rate_limit_until` epoch-seconds plus three helpers in `updates.py`: `_seconds_until_github_unblocked()`, `_record_github_rate_limit(response)` (reads `X-RateLimit-Reset` from the 403, falls back to a 1-hour pause when the header is absent or unparseable, and only extends the window — never shortens it via an out-of-order response), and `_is_github_rate_limit_response(response)` (status 403/429 with `X-RateLimit-Remaining: 0`, body-text fallback when proxies strip the header). Both call sites — `GET /updates/check` and the in-app updater's `_discover_target_release` — short-circuit when the window is active; the route surfaces a structured `{error: "GitHub rate limit reached...", retry_after_seconds: <int>}` response so the SettingsPage UI can show a real wait time instead of an opaque "failed to check for updates". The "ffmpeg didn't terminate gracefully" warning line the reporter quoted is the standard SIGTERM → 2s wait → SIGKILL pattern in `camera.py::_terminate_ffmpeg` — RTSP/TLS streams routinely take >2s to drain and that warning fires for many users with no FTP issues; once the cover loop is silenced the resource pressure is gone, and the warning itself is cosmetic. **Tests**: `test_cover_negative_cache_skips_repeat_ftp_fanout` in `test_printers_api.py` mocks `download_file_try_paths_async` to return False, calls the endpoint twice, and asserts the second call's FTP mock count is unchanged (the negative cache held); `test_check_backs_off_after_github_rate_limit` in `test_updates_api.py` patches `httpx.AsyncClient` to return a 403 with `X-RateLimit-Reset` set 10 minutes ahead and asserts the second `/updates/check` request never reaches httpx and surfaces `retry_after_seconds > 0`. 134 printers + updates integration tests green; ruff clean.

- **Assign Spool: printer card refreshes immediately, no Force-refresh needed (#1414 follow-up, reported by @snozzlebert)** — After assigning a spool via the modal, the Filament page Location column updated correctly but the Printer card kept showing "Empty slot (External Slot 1)" until the user manually pressed Force-refresh. The MQTT command itself was going through fine; the gap was on the client side. `AssignSpoolModal`'s two `useMutation.onSuccess` callbacks invalidated the inventory / slot-assignment queries (Filament page reads from those — correct) but never invalidated `['printerStatus', printerId]` and never issued a `pushall` to make the printer republish its state. For Bambu RFID-tagged spools the printer echoes the new `tray_type` over MQTT on its own and the websocket push would eventually surface it, but for non-RFID spools and A1 mini external slots (reporter's case) the firmware doesn't volunteer that state change, so the card sat on stale `tray_type: ""` and `getEmptySlotKind()` rendered the "Empty slot" path. Fix adds a `nudgePrinterRepublish()` helper called from both `onSuccess` paths (internal-inventory `assignMutation` and `assignSpoolmanMutation`): calls `api.refreshPrinterStatus(printerId)` to issue the pushall (same call the Force-refresh button uses at `PrintersPage.tsx:1844`) and invalidates `['printerStatus', printerId]` so the refetch lands. Failures from `refreshPrinterStatus` are deliberately swallowed — the assignment itself already succeeded, and if the refresh nudge is offline the next regular poll / websocket update will catch up; we don't want to surface a misleading "assign failed" toast for a stale-cache cleanup that didn't go through. Mirrors the pattern `ConfigureAmsSlotModal` has used since #1235 (line 5346) but with the extra pushall step because assign-spool affects firmware-side state where configure-slot affects only client-side preset mapping. Same fix covers both inventory modes thanks to the shared helper. **Tests:** new `nudges the printer to republish after successful assignment (#1414)` in `AssignSpoolModal.test.tsx` — picks a material-matching spool to bypass the mismatch-confirm dialog, clicks the Polymaker spool card to select it, clicks "Assign Spool", asserts `api.refreshPrinterStatus(7)` was called. `printerId=7` (not the default 1) verifies the helper threads the prop value through correctly rather than hardcoding. The api mock at the top of the file gains `assignSpoolmanSlot`, `getSpoolmanSlotAssignments`, and `refreshPrinterStatus` so the existing 13 tests still pass alongside the new one. 14 modal tests + build clean.

- **FTP: tolerate transient 426 from buggy printer FTP when the file is actually on the SD card (#1417 follow-up, reported by @enjoylifenow)** — In the previous daily build, commit `1fac0276` tightened the post-STOR confirmation handler in `bambu_ftp.py` so that any `ftplib.Error` from `voidresp()` (including `error_temp 426` "Failure reading network stream") would fail the upload outright. The goal was to stop Bambuddy from sending a print command for a truncated 3MF when the printer's FTP server explicitly told us the data stream was cut — exactly the scenario surfacing the user's earlier "unable to parse 3mf file" 30 s into a print. Reporter then confirmed (after running a filesystem check + reformat + power cycle, all clean) that the same install **worked fine on v0.2.4.1** — proving that for the specific P2S firmware revision in question, the 426 is *noise*: the TLS data-channel close races the 226 confirmation, the server reports failure on voidresp, but the file *did* land fully on the SD card. The previous proceed-with-warning behaviour was accidentally correct for that firmware quirk. Reverting wholesale would re-introduce the silent-truncation bug, so instead narrow the rule: when voidresp raises an `ftplib.Error`, immediately follow up with an FTP `SIZE` query against the freshly-uploaded path. If the server-side size matches what Bambuddy just sent, the file is provably intact and Bambuddy proceeds with a warning (`FTP STOR returned error_temp for X but file is intact on the printer (N bytes match) — proceeding`). If the size doesn't match — or `SIZE` itself raises — the transfer was genuinely truncated (or the server is in too broken a state to be trusted) and the upload fails loudly with the error log path the previous round added (`server size=... expected=...`). Same logic is applied to both `upload_file()` and `upload_bytes()` so the legacy A1-compatibility manual-transfer path is covered identically. **Tests:** the two existing regressions from the previous round (`test_upload_426_data_stream_failure_returns_false`, `test_upload_bytes_426_data_stream_failure_returns_false`) are renamed and split: `test_upload_426_with_intact_file_proceeds` (SIZE matches → returns True, the reporter's case), `test_upload_426_with_truncated_file_returns_false` (SIZE smaller than expected → still fails, the original bug we don't want to regress), `test_upload_426_with_size_check_failing_returns_false` (SIZE itself raises → assume the worst), plus parallel coverage for `upload_bytes()`. The intact-file tests have to inject `SIZE` explicitly because the pyftpdlib mock only flushes the on-disk file after a clean voidresp — which doesn't happen when we monkeypatch voidresp to raise — and the docstring spells that out for future readers. 87 FTP unit tests green; ruff clean. The View-Timelapse-greyed-out behaviour the original #1417 report flagged stays untouched here — once the reporter confirms their upload reliability is back, that diagnosis continues on a healthy install.

- **AMS: physically-empty slots now consistently report state=9 (#1322 follow-up, diagnosed by @RosdasHH)** — Reporter dug into the BambuStudio source and pointed out that our previous fix only caught the narrow `{"id": N}` bare-payload shape, which Bambu firmware only sends right after a printer restart. In steady-state operation — including the more common post-Reset-Slot path on P1S and the A1 Mini BMCU — firmware sends a populated payload with stale fields and signals emptiness via the `tray_exist_bits` bitmask instead. Bambuddy already parsed that bitmask at `bambu_mqtt.py:1758` (`slot_exists = (tray_exist_bits >> global_bit) & 1`) and used it to wipe stale `tray_type` / `tray_color` / `tag_uid` fields, but never promoted the slot's `state`. So downstream readers — the API serializer at `printers.py:457`, the `tray_state in {9, 10}` short-circuit in `inventory.py:1358`, the AMS card — all saw `state: null` and had to guess from absent payload fields. Reporter's API screenshot showed exactly that shape: `state: null, tray_color: null, remain: 0, ...`. Fix lifts a `tray["state"] = 9` assignment to the outer `if not slot_exists` branch (was nested inside the stale-data-clear branch), so the bitmask path now writes the canonical "no spool" state for every empty slot regardless of whether stale fields are present. Hard-typed as `int` 9, not string `"9"` — the downstream check at `inventory.py:1358` uses `tray_state == 9` (not `in {"9", 9}`), so a string would have silently missed and the reporter's deadlock would have come right back. The previous narrow heuristic in `printer_manager.py:797-798` (the `len(tray) == 1 and "id" in tray` shape detector) stays in place as belt-and-suspenders for the post-restart bare-payload edge that bypasses the AMS merge — costs nothing and protects against any MQTT path that doesn't flow through `_handle_ams_data`. The `state: null` surfacing on the API resolves automatically since `printers.py` reads `tray_data.get("state")` directly. **Tests:** two new in `test_bambu_mqtt.py::TestAMSDataHandling` — `test_tray_exist_bits_promotes_empty_slot_to_state_9` exercises the steady-state populated-payload path (slot occupied → bitmask flips bit 1 to 0 → state=9, type-asserted as int; loaded sibling slot keeps its state=11 unchanged); `test_tray_exist_bits_does_not_change_state_on_loaded_slots` pins the negative path (bitmask bit=1 with state=3 leaves state untouched — transitional firmware states like "unloading" don't get corrupted). The two `printer_manager.py` regression tests for the narrow heuristic (`test_bare_tray_emulates_state_9`, `test_populated_payload_with_empty_state_3_is_not_promoted`) stay green — that path is unchanged. 397 mqtt+printer-manager unit tests + 50 inventory/Spoolman slot-assignment integration tests = 447 affected tests green; ruff clean. **UI: visual distinction between physically empty and unconfigured slots (in the same drop).** With the data layer now consistent, the AMS slot card surfaces what Bambuddy actually knows about each empty slot, without overclaiming. New helper `getEmptySlotKind(tray)` in `PrintersPage.tsx` returns `"physical"` (state ∈ {9, 10} — firmware positively confirmed no spool), `"reset"` (any other empty state — could be a user-cleared assignment, mid-unload, or just a slot the firmware hasn't reported on yet), or `null` (loaded). The inline label below the slot circle reads `t('ams.slotEmpty')` ("Empty") uniformly for any empty slot (regular AMS, HT, external) so users get a consistent label everywhere — the previous version only said "Empty" for firmware-confirmed state=9 slots and fell back to an em-dash otherwise, which surfaced as "Empty" for regular AMS slots but "—" for HT AMS (skipped by the bitmask loop) and external trays (separate MQTT path entirely). The state distinction now lives only on the **border** and **hover card** where it doesn't surprise. `FilamentSlotCircle` gains an `emptyKind` prop that picks a quieter dashed border colour for unconfigured slots (`#3d3d3d` vs `#666`), so the visual hierarchy reads "loaded > unconfigured > physically empty" at a glance even though the inline text only differentiates physical from everything else. `EmptySlotHoverCard` gains a `kind` prop and switches the hover label between `ams.emptySlot` ("Empty slot") for physical and the new `ams.emptySlotReset` ("No filament assigned") for everything else — also rewritten from the original "Slot reset — no spool assigned" for the same overclaim reason. All three slot-render call sites in `PrintersPage` (regular AMS grid, HT AMS single-slot, external spool tray) now compute and pass the kind. i18n: 2 new keys (`slotEmpty`, `emptySlotReset`) translated across all 8 locales; parity at 4854 leaves. New test `#1322: empty slot kind is "physical" when state=9 and "reset" otherwise` in `PrintersPage.test.tsx` reuses the existing `phase13EmptySlotProps` mock to capture the `kind` prop across a 4-slot fixture (state=9 / state=3 / state=null / loaded) and asserts each variant flows through. 71 PrintersPage + FilamentHoverCard tests green; build clean.

- **Stats page: Filament Used, By Time, and Success Rate now agree with Total Consumed and Total Prints (#1390 follow-up, reported by @IndividualGhost1905)** — After the archived-spool fix shipped the reporter confirmed it worked and gently flagged the round Bambuddy had explicitly postponed: Quick Stats `Filament Used` / `Filament Cost` didn't match `Total Consumed` on the Inventory page; Printer Stats `By Time` didn't match Quick Stats `Print Time`; the success-rate gauge percentage didn't relate to the `Total Prints` count shown right above it. Three independent root causes, fixed together. **(1) Filament Used vs Total Consumed.** `_compute_run_filament_grams` in `main.py` short-circuited to the slicer estimate for `status == "completed"` even when inventory had measured the actual AMS weight delta — the comment on the old test literally said "the print is done, so the full estimate is the right answer." That made Stats and Inventory two different sources of truth: Stats showed slicer-estimate grams, Inventory showed AMS-tracked grams, and the two numbers naturally diverged (slicer estimates are typically a few percent off real consumption). Fixed by reordering the helper so the tracked spool delta (sum of `usage_results[].weight_used` — same source that drives the per-spool `weight_used` counter behind Total Consumed) takes priority for *every* status. The slicer estimate stays as the fallback when no inventory was tracked for the print, and the partial-progress scale stays as the fallback for failed/cancelled/stopped with no tracker — so the existing #1378 partial-aware behaviour is preserved. The `_run_cost` block right next to it already used this priority order, so cost was always tracker-first; only `filament_used_grams` was inconsistent. New prints now record what was actually consumed, so Stats and Inventory show identical numbers. **(2) Printer Stats By Time vs Quick Stats Print Time.** `/archives/slim` only populated `actual_time_seconds` when `status == "completed"`. For failed/cancelled rows the field stayed null and the frontend (`StatsPage.tsx::PrinterStatsWidget`) fell back to `print_time_seconds` — the slicer's *estimated full-print duration*, which is the wrong number for a print that failed at 15% progress. Quick Stats `total_print_time_hours` already counted every event's elapsed `duration_seconds` regardless of status, so the two halves of the page disagreed by the (estimate − actual-elapsed) gap on every non-completed event. Dropped the `status == "completed"` gate in the slim row's `actual_time_seconds` computation; failed/cancelled events now report their measured elapsed time and the frontend's `actual || print_time` fallback chain only ever falls through to the slicer estimate for events with no measured duration at all. **(3) Success Rate %.** Formula was `successful / (successful + failed)`, denominator excluding `cancelled` / `stopped` / any other status. Combined with the visible "Total Prints: N" label right above the gauge, that produced confusing numbers: 4 successful, 0 failed, 48 cancelled showed 100% out of an apparent 52 prints. Switched to `successful / total_prints` — straightforward "what fraction of all attempts succeeded", matches the count the user reads from the widget header. The widget's `stats` prop already exposed `total_prints` so no type changes were needed. **(4) Records widget "Longest Print" — knock-on from (2).** Before (2), `actual_time_seconds` was null for non-completed rows so the Records widget's `findMax(a => a.actual_time_seconds)` implicitly only ranked successful prints. Once (2) populated the field for failed/cancelled events too, an aborted 25-hour print would have outranked a genuinely successful 18-hour print as "Longest Print" — a real semantic regression. Added a `status === 'completed'` gate on the longest getter only, restoring the pre-fix semantic. The other two records (Heaviest Print, Most Expensive) already included non-completed events via `filament_used_grams` and `cost` and intentionally stay as-is, since those values are populated by the partial-progress / tracker logic in `_compute_run_filament_grams` and were never gated on status. **Out of scope** — backfilling the 52 historical events on the reporter's database: `PrintLogEntry.filament_used_grams` is already baked in as the slicer estimate for older prints and we don't store per-event AMS deltas separately to backfill from. The reporter said upfront she'd "reset all statistics and start over" to track new prints cleanly, so this lands without a migration. Similarly the Failure Analysis 30-day default (a separate divergence the agent surfaced while mapping the page) wasn't part of the reporter's complaints and stays untouched. **Tests:** `test_run_filament_helper.py::test_completed_returns_estimate_even_when_tracked_differs` was renamed and inverted to `test_completed_prefers_tracked_over_estimate` — it now pins the new contract (completed + tracker → tracker value), guarding against a future "trust the estimate again" refactor. All 13 existing helper tests still green; the helper's contract changed in exactly one place and the rest (no-tracker fallback, partial-progress scaling, multi-slot summation) is unchanged. `test_archives_api.py::test_slim_actual_time_null_for_failed` was renamed to `test_slim_actual_time_for_failed_includes_elapsed` and inverted — same pattern, the old assertion is now the regression check. `StatsPage.test.tsx` gains two: `uses total_prints as denominator so cancelled/stopped events count (#1390)` (40 successful / 20 failed / 40 cancelled-or-stopped = 40%, matches Total Prints: 100, where the old formula would have shown 67%); and `Longest Print excludes failed prints (#1390)` pinning that an aborted 25-hour run can't outrank a successful 8-hour print as the Longest Print record — protects against a future refactor that removes the new status gate inside `findMax`. 33 StatsPage tests + 66 archive-API + run-filament tests green; frontend build clean.

- **Inventory: "Total Consumed" now includes archived spools' usage, and the eraser works on archived too (#1390 follow-up, reported by @IndividualGhost1905)** — After the original #1390 fix shipped, the reporter noticed that archiving a spool with consumed weight quietly subtracted that weight from the "Total Consumed" stat at the top of the Inventory page, and un-archiving put it back. Total Consumed is a *running* counter (lifetime usage since the last reset), not a current-inventory snapshot, so a spool's recorded prints SHOULD stay in the total even after the user archives the physical roll — otherwise the reset baseline becomes meaningless and the running total walks down as users tidy up their inventory. Root cause was a stats loop in `InventoryPage.tsx` that gated every aggregate (totalConsumed, totalWeight, lowStock, byMaterial, activeCount) behind a single `if (s.archived_at) continue;` check. Fix splits the loop so `totalConsumed` is computed BEFORE the archived-skip and the other aggregates after it, matching the semantic difference between "running counter" and "currently-available inventory". Two adjacent regressions the reporter also surfaced are fixed in the same pass: (a) the per-spool **eraser button** in the inventory card grid used to require `!spool.archived_at && spool.weight_used > 0` — archived spools had no way to zero their tracking counter without first being un-archived. The `archived_at` half of that gate is gone; the `weight_used > 0` half stays. (b) `activeSpoolIds`, the target list for the "Reset all usage" bulk action, used to filter out archived spools — so a Reset-all click left archived consumption stuck in the (now-corrected) totalConsumed total. Renamed to `resetableSpoolIds` and broadened to include archived, so a Reset-all genuinely zeroes the stat in one click. Backend reset endpoints already accept archived IDs (both `inventory.py::reset_spool_usage` and the Spoolman mirror), so this is frontend-only. Inventory-mode parity holds (both modes share `InventoryPage`). i18n: 8 tooltip/confirm strings retranslated across all 8 locales — the "every active spool" / "all {{count}} active spools" wording was now incorrect (archived included), so each locale's `resetAllUsageTooltip` drops "active" and `resetAllUsageConfirm` makes the archived-inclusion explicit ("(archived included)" / "(incluindo as arquivadas)" / "（含已归档）" etc.); parity holds at 4852 leaves. Tests: a new `InventoryPageArchivedConsumed.test.tsx` with a 2-spool fixture (active 300 g + archived 500 g) pins `totalConsumed = 800g` after the fix and asserts the "Reset all spool usage" button stays rendered; a future refactor that re-introduces the archived-skip drops the assertion to "300g" and CI fails. 13 InventoryPage tests + i18n parity + build all green.

- **P2S camera: relaxed ffmpeg probe settings so the RTSP stream actually locks (#1395 follow-up, reported by @Tschipel)** — Reporter on a P2S running firmware 01.02.00.00 saw the camera connect for a few seconds and then time out, repeating. P1S on the same install worked fine because P1S uses the chamber-image protocol (port 6000), not RTSP — different code path. The P2S RTSP path was running ffmpeg with `-probesize 32 -analyzeduration 0`, tuned for X1/H2 fast startup. The P2S's slower keyframe pacing means ffmpeg can't lock onto the stream within 32 bytes; its own stderr literally says "Stream #0: not enough frames to estimate rate; consider increasing probesize". After ~2 s ffmpeg gives up, Bambuddy reconnects, the cycle repeats. The naïve "just bump probesize" patch would regress every other RTSP-capable printer, so the fix is also the first step of the camera architecture overhaul: per-model tuning lives in a new `backend/app/services/camera_profiles.py` registry instead of hard-coded module constants. `CameraProfile` dataclass holds the previously-global knobs (`probesize`, `analyzeduration`, `rtsp_reconnect_max`, `rtsp_reconnect_delay`, plus an `extra_ffmpeg_input_args` hook for future per-model flags); `get_camera_profile(model)` returns the model's profile or the default. The default profile preserves the historical X1/H2 fast-startup values verbatim — X1, X1C, X1E, X2D, H2C, H2D, H2D Pro, H2S all see no behaviour change. P2S gets the only override today: `probesize=1_000_000`, `analyzeduration=500_000` — enough room for the slow keyframe without adding multi-second startup latency. Internal SSDP codes (e.g. `N7` → P2S) resolve via an alias map so the camera path works during the early-connect window before the display name is settled. The two `_RTSP_MAX_RECONNECTS` / `_RTSP_RECONNECT_DELAY` module constants are gone in favour of `profile.rtsp_reconnect_max` / `profile.rtsp_reconnect_delay`; same defaults, but now overridable per model. Pattern is intentionally extensible — adding the next quirky model is a config entry in `_PROFILES`, not another global constant. **Tests:** 9 new in `test_camera_profiles.py` cover unknown model → default, `None`/empty → default, default preserves historical values, P2S has relaxed probe, P2S internal code (`N7`) resolves to P2S profile, lookup is case-insensitive, every other RTSP model still uses the default (so the next refactor regression is caught at unit-test time), profile is frozen (immutable). 58 existing camera-related tests still green; 5008 backend tests total green; ruff clean.

### Changed
- **Inventory: spool ID surfaced in the edit modal and the AMS filament hover card (#1385, contributed by @chanakyan-arivumani in #1402, reported by @pgladel)** — Reporter asked for the Spoolman / internal spool ID to be visible when editing a spool and when hovering the AMS-loaded filament tile, so the install can be cross-checked against the underlying spool row without opening Spoolman's UI separately. The data was already on the rendered components; only the rendering was missing. `SpoolFormModal` header now shows `#<id>` in muted monospace next to the "Edit Spool" title — but **only** in edit mode; copy and create paths don't surface an ID because no stable ID exists yet (a copy produces a new spool, and surfacing the source spool's ID there would mislead the user into thinking the new spool inherited it). `FilamentHoverCard`'s assigned-spool block shows the same `#<id>` inline with the brand/material/colour line; the existing `<p class="truncate">` is wrapped in a flex container with `min-w-0` on the parent and `shrink-0` on the new span so the truncation still kicks in on long names and the ID stays at full width. Inventory-mode parity holds without any branching — both internal and Spoolman spools carry an `id` with the same shape so the modal renders the right ID regardless of which inventory backend is in use. Tests: one regression in `FilamentHoverCard.test.tsx` (asserts `#42` renders in the assigned-spool block) plus three added in `SpoolFormModal.test.tsx` as post-PR work — edit mode shows the ID, create mode shows none, copy mode shows none. The copy-mode test is the load-bearing case: a future refactor that drops the `isEditing &&` guard would silently start leaking the source spool's ID into the Copy header, and now fails the test instead. 51 affected frontend tests green; frontend build clean.

- **Archives → Print Log: filename column expands to fit available width and wraps long names instead of clipping at 200 px (#1406, requested by @daFreeMan)** — Reporter on a 27" monitor saw long filenames like `Simple_Print_Monitor_-_ST7789_1.54_display_case_` truncated even though the table had plenty of unused horizontal space. The print-name `<span>` had a hard `truncate max-w-[200px]` cap that ignored viewport width entirely. Replaced with `break-words` + a `title` attribute, dropping the explicit max-width so the column auto-sizes to content. On wide screens the full name shows on a single line; on narrow ones it wraps inside the cell instead of forcing horizontal scroll. The `title` hover preserves the original tooltip affordance for the rare case where a really long name still gets truncated by viewport constraints. Frontend build clean; 23 ArchivesPage tests still pass.

### Fixed
- **Library "Open in Slicer": broken when the display name lacked `.3mf` or contained `/ \ ? #` (#1413, contributed by @benhalverson in #1416, reported by @ddingg)** — Reporter on Windows 11 / Chrome saw Bambu Studio and OrcaSlicer reject the slicer URL from the 3D-preview modal's "Open in Slicer" button with a parse error, even though downloading the same URL with curl worked. The MakerWorld "Save and open" path and the "Recent imports" entry both worked fine — different code path. Root cause: `GET /library/files/{file_id}/dl/{token}/{filename}` uses the URL-tail filename purely as a hint for the slicer to detect the file format from the path; the backend itself reads `file.filename` from the DB (`library.py:3806`) and ignores the URL segment. When `ModelViewerModal.handleOpenInSlicer` passed the modal `title` (display name like `"Mecha Mewtwo No AMS Multi Color Parted Statue"` — no extension) verbatim through `encodeURIComponent`, the resulting URL ended without `.3mf` and the slicer's client-side extension sniff refused to parse the response. The same path also let `/ \ ? #` through, which can survive `encodeURIComponent` (`/` is unencoded by spec) and break the slicer's URL parser separately. Fix adds a small `buildSlicerUrlFilename(filename)` helper to `frontend/src/api/client.ts` that strips `/ \ ? #` (replacing them with `_`) and appends `.3mf` when missing; `getLibrarySlicerDownloadUrl` now routes the filename through it before `encodeURIComponent`. The `.3mf` check is case-insensitive (`safe.toLowerCase().endsWith('.3mf')`) so `model.3MF` is handled correctly — a subtle improvement over the equivalent inline logic that's still present on the archive-side helpers `getArchiveForSlicer` and `getArchiveSlicerDownloadUrl` (call-site consolidation is a separate follow-up). Safe because `ModelViewerModal.tsx:264` already gates the button to `fileType === '3mf'` library files, so unconditional `.3mf` append never produces nonsense like `model.gcode.3mf`. Two new tests in `frontend/src/__tests__/api/client.test.ts` cover both branches (display name without extension → `.3mf` appended; display name with `/ ? #` → replaced with `_`). 21 client tests green; frontend build clean.

- **Add Spool modal: hex colour field can be typed into character-by-character again (#1407, reported by @anthonyma94)** — Pre-fix, after typing the first hex character the input's value snapped to e.g. "A00000" (the #1055 fix aggressively padded to 8 chars on every keystroke), the cursor jumped to the end, and the next keystroke landed at position 7 — which the original 7-char-truncation branch then dropped. Net effect: only the first character was ever typed; the rest stayed as zeros unless the user pasted a full hex code. Fix splits "what the user is typing" from "what gets sent to the backend": the input now has its own draft state holding 0–6 chars freely, and `updateField('rgba', ...)` only fires once the draft reaches a complete 6-char RGB (commits as `<6chars>FF`). On blur, a partial 1–5 char draft is right-padded with `0` and committed so the form state always carries a valid 8-char rgba — preserves the #1055 invariant that the backend never sees a malformed value, without re-introducing the truncate-on-keystroke trap. A `useEffect` keeps the draft in sync when an external action (the colour picker, a swatch click, edit-mode load) changes the canonical hex. Paste of 7-/8-char strings truncates to the leading RGB triplet: Bambu filaments are opaque and the UI never exposed an alpha affordance, so dropping the (undocumented) "paste with alpha" case is fine. The existing `ColorSectionHexInput.test.tsx` was rewritten to match the new contract — 8 tests covering both new behaviours (draft reflects each keystroke, no commit while partial, commits on length 6, blur-padding for partials, no commit when cleared then blurred) and the kept #1055 invariants (committed rgba is always 8 hex chars, 7-/8-char paste truncates, non-hex chars stripped). 51 spool-form frontend tests green; frontend build clean.

- **Virtual Printer queue: timelapse / bed-leveling / flow-cali / vibration-cali / layer-inspect now inherit the slicer's choice instead of always falling back to global defaults (#1403, reported by @pwostran)** — Reporter sliced in OrcaSlicer with timelapse enabled, sent to a VP queue, started the job from the queue and got no timelapse video. The dispatch chain itself was correct (queue item → scheduler → MQTT command honours `timelapse`); the gap was at queue-add time: the VP's `_add_to_print_queue` read `default_timelapse` from settings (introduced in #1235 to stop column defaults from winning), but ignored the slicer's project_file MQTT command entirely. The slicer's choice — which Bambu Handy / Bambu Studio / Orca all surface in their "Print options" dialog and ship in the MQTT payload as `timelapse: true|1` — was being thrown away. So a user with `default_timelapse=false` (the new-install value) would have to either flip the global setting or manually edit every queue item, even though their slicer's UI was clearly saying "record timelapse for this job". Fix: `on_print_command` in the VP manager now stashes the slicer's project_file dict keyed by filename, and `_add_to_print_queue` waits up to 2 s for that capture before reading the settings fallback. Each option flows through per-field — slicer value wins if present, else the existing settings default (so users who explicitly set `default_timelapse=true` in their VP workflow card still get that on slicers that don't send a print command). MQTT field naming is preserved exactly: `bed_leveling` (single L) on the wire stays mapped to `bed_levelling` (double L) on the Bambuddy column. Integer 0/1 from H-family slicers and bool true/false from P1/X1 slicers both coerce correctly via `bool()`. Wait is skipped when there's no MQTT server attached to the VP instance (covers unit tests calling `_add_to_print_queue` directly so they don't pay the 2 s tax) and capture is consumed on use so the dict stays bounded across many prints. Two new regressions in `test_virtual_printer.py::TestPrintQueueMode`: `test_add_to_print_queue_inherits_slicer_print_options` (slicer=True overrides settings=False across all 5 fields; capture is consumed) and `test_add_to_print_queue_coerces_slicer_integer_zero_one` (H-family integer payload is coerced). The existing `#1235` test (`test_add_to_print_queue_uses_workflow_defaults_from_settings`) still passes because the no-MQTT-attached gate skips the wait, so the settings fallback path is preserved when no slicer capture exists. **Plus two side-bugs surfaced while investigating Martin's "modal not respected" hypothesis** — the support-package evidence cleared the reprint modal (46 `print_scheduler` and 33 `background_dispatch` events with `timelapse: true` shipped to real P1S printers, end-to-end working), but the same dig turned up two latent issues worth fixing in the same pass: (a) **`POST /webhook/printer/{id}/start` was broken on four axes** — `await printer_manager.start_print(...)` against a `def` (not `async def`) function, `queue_item.archive_id` (int) passed as the `filename` arg, `printer_manager.get_status(...).get(...)` against a `PrinterState` dataclass (not a dict), and every print option discarded (timelapse, bed_levelling, AMS mapping). The route would 500 before ever reaching the printer. Rewritten to mirror `POST /print-queue/{item_id}/start`: just clear `manual_start=False` on the next pending queue item and let the scheduler dispatch it with the queue's stored options intact. Three new regressions in `test_webhook_start_print.py` (clears `manual_start`, preserves stored print options, 404 when no pending items / unknown printer). (b) **`vibration_cali` default drift in `background_dispatch.py`** — `ReprintRequest.vibration_cali` and `FilePrintRequest.vibration_cali` both default to `True` (matches Bambu Studio behaviour for X1/P1 series), but the two `_process_job` call sites read `job.options.get("vibration_cali", False)`. Cosmetic today because the frontend always sends the field, but a latent landmine for any future caller that bypasses the schema (e.g. an internal dispatcher seeding options programmatically). Both call sites flipped to `True`; new contract test `test_dispatch_option_defaults_align_with_request_schema_defaults` introspects the source to lock the alignment for all six print-option fields so this drift can't recur. 116 VP unit tests green; 4999 backend tests green; ruff clean.

- **Inventory: "Reset usage to 0" no longer inflates remaining weight back to label_weight (#1390 follow-up, reported by @IndividualGhost1905)** — Reporter reset a 544 g spool's consumed counter and watched its displayed remaining jump to 1000 g — exactly the opposite of what the dialog promised ("Spools and remaining weights are not changed"). Root cause was an architectural conflation in the internal inventory model: a single `weight_used` column was doing two jobs, the resettable "consumed since tracking started" stat AND the basis for the displayed remaining (`label_weight - weight_used`). Zeroing it correctly cleared the stat but unavoidably reset remaining to full. Spoolman has separate `used_weight` and `remaining_weight` fields, so its API call was correct, but Bambuddy's frontend was *also* computing remaining as `label_weight - weight_used` for Spoolman spools (ignoring Spoolman's real `remaining_weight` field), so the same visual bug bit in Spoolman mode too. **Internal mode fix:** new `weight_used_baseline` column (Float, default 0) on the `spool` table; the "Total Consumed" display is now `weight_used - weight_used_baseline` clamped to ≥0; the reset endpoints stamp `baseline = weight_used` and leave `weight_used` untouched, so remaining (= `label_weight - weight_used`) is preserved. Subsequent prints continue to grow `weight_used` and the resettable counter naturally tracks the post-reset delta. **Spoolman parity fix:** `_map_spoolman_spool` now reads Spoolman's `remaining_weight` field and returns a synthetic `weight_used = label_weight - remaining_weight` so the frontend's remaining calc matches Spoolman's real stored value; `weight_used_baseline` is computed as `synthetic_weight_used - real_used_weight` so `weight_used - baseline` equals Spoolman's `used_weight` (the resettable counter). After a Spoolman reset (real used_weight=0, real remaining_weight=544) the user sees consumed=0 and remaining=544 — identical to internal mode. Also fixed a related Spoolman bug: editing a spool's metadata after a reset would PATCH Spoolman with `remaining_weight = label - used_weight = 1000`, overwriting the real 544 g; `update_spool` now derives the default `weight_used` from Spoolman's `remaining_weight` instead of `used_weight` so non-weight edits preserve the existing physical state. Frontend `totalConsumed` aggregate in `InventoryPage` and the three "consumed" displays in `ForecastPanel` (delta-rate, per-SKU totalUsedG, per-spool consumed cell) all switched to `Math.max(0, weight_used - (weight_used_baseline ?? 0))`. The `?? 0` fallback keeps pre-migration installs rendering correctly until `init_db()` runs the idempotent `ALTER TABLE spool ADD COLUMN weight_used_baseline REAL DEFAULT 0` (works on both SQLite and Postgres). **Tests:** `test_spool_reset_usage.py` rewritten — old asserts that the endpoint zeroed `weight_used` now assert it stamps baseline = weight_used and leaves weight_used alone, plus a new `test_reset_then_print_advances_only_the_counter` test that simulates a 50 g print after a reset and confirms `consumed=50, remaining=494` (i.e. remaining keeps decrementing across the reset). `test_spoolman_inventory_helpers.py` gets two new tests on the mapper covering pre-reset and post-reset Spoolman shapes. `test_spoolman_inventory_api.py::test_reset_spool_usage` updated to assert the new InventorySpool contract (consumed=0, remaining=750, baseline absorbs the reset). 4993 backend tests green; ruff clean; frontend build clean. Per the inventory-parity rule saved last session: both modes now ship the same UX, both call sites verified end-to-end before declaring done.

- **Adding a printer with a wrong access code (or unreachable IP) no longer creates an empty card** — Several support reports traced back to a single root cause: the user mistyped their access code in the Add Printer dialog, `POST /printers/` happily persisted the row, the subsequent `printer_manager.connect_printer()` call was fire-and-forget so the failure was invisible, and the dashboard ended up showing a printer card that could never display state. The create route now runs `printer_manager.test_connection()` (the same MQTT probe the standalone Test Connection button has always used) BEFORE inserting the row, and refuses with HTTP 400 if the probe fails. The Printer row is never written on failure. **Structured error response**: backend returns `{detail: {code: "printer_connection_failed", message: "..."}}` rather than a plain English string — the new `ApiError.code` field on the frontend lets the toast layer pick a localized `printers.toast.connectionFailedNotAdded` key instead of surfacing the English fallback. **Existing tests** kept green via an autouse `_mock_printer_test_connection` fixture in `test_printers_api.py` that defaults the probe to success; a new `test_create_printer_rejects_when_mqtt_probe_fails` asserts the failure path returns 400, surfaces the stable code, AND verifies the row was not persisted (the critical part — earlier versions of the regression would have passed even if we'd left the row behind). 8 new i18n translations for `printers.toast.connectionFailedNotAdded` across all 8 locales; parity holds at 4831 leaves. 28 printer-route tests green.

### Changed
- **GitHub backup: save-failure messages render inline on the card instead of as a toast** — The new "repository is not private" rejection message is ~250 chars listing every credential the backup carries, which clips badly in a toast. Both the initial-setup save and the debounced autosave now stash the backend's error message into a new `saveError` state and render it as a red inline banner above the test-result block, with `whitespace-pre-wrap` so the full message stays readable. The banner clears on a successful save, on the next save attempt, and as soon as the user starts editing the URL / token / provider (the three fields whose changes invalidate the privacy check) — so it doesn't linger after the user has already addressed the cause. Short success toasts ("Settings saved", "Token updated", "Backup enabled") are unchanged. Manual dismiss button included for users who want to clear it without retrying.

### Security
- **GitHub backup refuses to save against a non-private repository** — While auditing real-world Bambuddy backup repos on GitHub I found several that were left public by their owners. That's a serious data leak: the settings backup only filtered `bambu_cloud_token` and `auth_secret_key`, so `mqtt_username`, `mqtt_password`, `ha_token`, `prometheus_token`, `bambu_cloud_email`, `external_url`, and the printer access codes (via K-profiles, which carry the serial number) were going to whatever visibility the user picked when they created the repo. Fix is a hard guard at every save and re-checked on every push: **`POST /github-backup/config` and `PATCH /github-backup/config`** (when the URL, token, or provider changes) run a connection test internally and return HTTP 400 unless `is_private` comes back True. Same check fires inside `run_backup()` before every scheduled or manual push, so a repository that was private at config time but later flipped to public in the provider's UI gets a clear "Backup aborted: the target repository is no longer private" failure entry instead of leaking the next backup. Implementation: each provider's `test_connection` (`GitHubBackend`, `ForgejoBackend` override, `GitLabBackend` override; `GiteaBackend` inherits unchanged) now returns `is_private: bool | None` — `True` for confirmed private, `False` for public (or GitLab's `internal`), `None` for "couldn't determine" (older self-hosted APIs, non-2xx responses). The route helper `_enforce_private_repo` rejects anything that isn't `True`, with separate error messages for the public case ("Make the repository private...") vs the unknown-visibility case ("...could not confirm..."). **Frontend** test-connection UI now renders the visibility result inline — green check + "Repository is private — safe to back up to" when confirmed, red banner with the full list of credentials at risk + "Saving is blocked until..." when public, yellow banner + "could not determine" when null. Three new i18n keys (`repoIsPrivate`, `repoIsPublicWarning`, `repoVisibilityUnknown`) translated across all 8 locales; parity holds at 4830 leaves. **Wiki** `docs/features/backup.md` gains a top-level `!!! danger "Private repositories only"` block listing what's at stake and what to do if the user already has a public backup repo, plus every per-provider setup step is updated from "(can be private)" to "(**must be private**)". **Tests**: 5 new in `test_github_backup_api.py::TestGitHubBackupPrivateRepoGuard` — create rejects public (400 + "not private" in detail), create rejects unknown visibility (400 + "could not confirm"), create rejects failed test_connection (400 + propagates the underlying message), PATCH that changes the URL re-runs the check and rejects on public, PATCH that touches an unrelated field (e.g. `schedule_enabled`) does NOT call `test_connection` (proven via a mock that raises if called — without the field-change gate, every benign toggle would trigger a live API call). The existing 15 tests now use an autouse fixture that mocks `test_connection` to return private-success so they don't try to reach github.com. 4905 backend tests green.

### Fixed
- **Spoolman edit-spool: editing a spool no longer mints duplicate filaments in the Spoolman catalogue (#1357 follow-up, reported by @pgladel)** — After the initial #1357 close, the reporter showed that BB was still spawning new Spoolman filament rows on every subsequent edit. The previous fix taught `find_or_create_filament` to bridge the AMS-sync name shape (`"Glow"`) with the user-edit shape (`"PLA Glow"`), but only on the *find* path — the moment the user changed any field that fed the match key (subtype/material/brand/color_hex) the lookup missed and a brand-new filament was created, the spool was re-linked to it, and the previous filament was orphaned. Repeating the loop produced the spread the reporter screenshotted (IDs 126/127/128/129 all "Amazon Basics / PLA Glow / PLA", slight color variants). Root fix is a behaviour change in `PATCH /spoolman/inventory/spools/{id}`: before calling `find_or_create_filament`, the route now computes whether the desired metadata still matches the current linked filament and, if so, skips the lookup entirely (a no-op metadata edit — just `note` or `weight_used` — never touches the filament catalogue). When metadata IS changing it consults a new `SpoolmanClient.is_filament_shared(filament_id, exclude_spool_id)` helper: if the current filament is a *singleton* (only this spool points at it, archived spools included so a sibling-archive doesn't fake singleton-ness), the route PATCHes that filament in place via `patch_filament` — `name`, `material`, `color_hex`, `weight`, plus a `vendor_id` resolved via `find_or_create_vendor` when the brand changed. Only when the filament is genuinely shared with another spool does the route fall back to the legacy `find_or_create_filament` path, because PATCHing a shared filament would silently rewrite every sibling spool's metadata. Net effect mirrors internal-inventory behaviour ([[feedback_inventory_modes_parity]] saved this session): editing a spool updates the thing the spool already points at, instead of proliferating new entities. Three new tests in `test_spoolman_inventory_api.py::TestSpoolmanInventoryCRUD` cover the new contract: a no-op metadata edit (only `note`/`weight_used`) does NOT call `find_or_create_filament` OR `patch_filament`; a subtype change against a singleton filament calls `patch_filament(7, {...name: "PLA Matte"})` and NOT `find_or_create_filament`; the same change with `is_filament_shared` mocked to True falls back to `find_or_create_filament` and does NOT call `patch_filament`. 162 spoolman-inventory tests + 192 broader spoolman tests green; ruff clean.

- **Inventory: "Print labels…" now works in Spoolman mode** — Both endpoints already exist (`POST /inventory/labels` for the built-in table, `POST /spoolman/labels` for Spoolman), and the `LabelTemplatePickerModal` correctly branches on a `spoolmanMode` prop. But the modal was instantiated in `InventoryPage.tsx` with `spoolmanMode={false}` hard-coded, with a stale comment from the original PR claiming "Spoolman path hands users an iframe straight to Spoolman so the per-spool button never shows in that context". That assumption stopped being true when the unified inventory UI shipped — the per-spool button DOES show in Spoolman mode now, but every click resolved to `/inventory/labels` with Spoolman spool IDs and returned `404 Spool(s) not found`. Fix passes the actual `spoolmanMode` value through to the modal (one-line change, plus removing the stale comment block). The existing `LabelTemplatePickerModal.test.tsx` already covers both branches at the component level — the gap was that no test exercised the InventoryPage wiring. This is another instance of the parity rule from [#1390 follow-up]: inventory features must ship the same UX in both modes; per the new feedback memory, any future inventory change gets a mental checklist of both routes + both client methods + both UI gates before being considered shipped.

### Added
- **Inventory: "Reset usage to 0" also works in Spoolman mode (#1390 follow-up)** — The first cut of this action only wired the built-in inventory path, so Spoolman users saw the eraser icon disappear when they switched modes. Now the same two endpoints exist on the Spoolman inventory router: `POST /spoolman/inventory/spools/{spool_id}/reset-usage` PATCHes Spoolman's `/spool/{id}` with `used_weight: 0` for a single spool, `POST /spoolman/inventory/spools/reset-usage-bulk` does the same per ID across an explicit list and returns `{reset: N}` (individual Spoolman failures are logged and counted out, the batch keeps going). A `reset_spool_usage(spool_id)` helper on `SpoolmanClient` is the actual HTTP call. The mutations in `InventoryPage.tsx` already had the right shape — they now switch on `spoolmanMode` to pick `api.resetSpoolmanInventorySpoolUsage` / `api.bulkResetSpoolmanInventorySpoolUsage` vs the internal-inventory client methods, and the three `spoolmanMode ? undefined : ...` gates that hid the eraser buttons in Spoolman mode are gone. Three new tests in `test_spoolman_inventory_api.py` lock the Spoolman path (per-spool, bulk, and the typo-wipe guard on empty list). The wiki page now says "Spoolman users get the same actions" instead of the original "Spoolman-mode users don't see either button" note. 4900 backend tests green.
- **Inventory: "Reset usage to 0" per spool and across all active spools (#1390 follow-up, requested by @IndividualGhost1905)** — Each spool's `weight_used` counter accumulates over its lifetime and feeds the "Total Consumed (Since tracking started)" stat on the Inventory page. There was no way to clear it without nuking the spool or manually editing the field — and manually setting `weight_used=0` via PATCH /spools/{id} auto-locks the spool (`weight_locked=true` is auto-set whenever `weight_used` is sent explicitly, so AMS auto-sync stops touching the spool), which is the wrong behaviour for "clean-slate my Total Consumed stat so future prints track from zero". **Two dedicated endpoints** in `backend/app/api/routes/inventory.py` zero the counter without touching the lock flag: `POST /inventory/spools/{spool_id}/reset-usage` (single spool) returns the updated `SpoolResponse`; `POST /inventory/spools/reset-usage-bulk` (`{spool_ids: [int, ...]}`) returns `{reset: N}`. The bulk endpoint rejects empty / missing `spool_ids` (HTTP 400) — no wildcard / "reset-all" shortcut, since a typo there would wipe the entire inventory's tracking; the caller must explicitly pass the list. Both leave `weight_locked` alone: if the user had locked the spool, the lock stays; if it was unlocked, it stays unlocked and the next AMS sync picks up from zero. **Frontend** adds two affordances: a small eraser icon button on the "Total Consumed" stat card (visible only when there's actually usage to reset AND we're not in Spoolman mode) that opens a confirm modal explaining what the reset clears and that the spools / remaining weights are not changed, and an eraser icon in each table row's action column (visible only on active spools with `weight_used > 0`, hidden in Spoolman mode since Spoolman manages its own usage accounting). Both routes share the same `ConfirmModal` infrastructure as delete/archive — `confirmAction` state now covers `'delete' | 'archive' | 'reset-usage' | 'reset-all-usage'`. **i18n**: 10 new keys (`resetUsage`, `resetUsageTooltip`, `resetUsageConfirm`, `resetAllUsage`, `resetAllUsageTooltip`, `resetAllUsageConfirm`, `usageReset`, `allUsageReset`, `resetUsageFailed`, plus `resetUsage` reused as confirm button label) translated across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). Parity check holds at 4827 leaves per locale. **Tests**: 8 new regressions in `test_spool_reset_usage.py` cover per-spool reset zeroes `weight_used`, per-spool reset does NOT auto-lock, per-spool reset preserves an existing lock, 404 for missing spool, bulk reset zeroes only listed spools (untouched spools keep their usage — the typo-wipe guard), bulk reset rejects empty list (400), bulk reset rejects missing `spool_ids` field (400), bulk reset preserves `weight_locked` across mixed locked/unlocked targets. 4897 backend + 1901 frontend tests green.

### Changed
- **Settings → Filament: "Spool Catalog" now shows the same UI in Spoolman mode as in internal-inventory mode** — Previously, switching to Spoolman mode hijacked the Spool Catalog card and replaced it with a Spoolman filament list (Vendor — Name / Material / Weight / Spool Weight) with inline edit for name + spool_weight. Two separate concepts had been merged into one card: a Bambuddy-local **spool tare catalog** (the actual purpose of the card — name + weight definitions used to compute spool tare) vs a **filament editor** for Spoolman's `Filament` entity. The filament-editor view replaced the spool tare table entirely in Spoolman mode, with no way to see or manage the spool catalog. Now the card always renders the local Spool Catalog (Add / Edit / Delete / Export / Import / Reset / bulk-delete) regardless of inventory mode. The Spoolman-filament inline editor is removed — Spoolman users edit filament name / spool_weight in Spoolman's own UI. Side effect of the rewrite: the noisy `GET /api/v1/spoolman/inventory/filaments → 400 Bad Request` that fired on the Filament settings page even when Spoolman is disabled is gone, because the component no longer issues the probe at all. Files affected: `frontend/src/components/SpoolCatalogSettings.tsx` (rewrite, ~750 → ~445 lines), `frontend/src/components/SpoolWeightUpdateModal.tsx` (deleted — only used by the removed editor), test file rewritten to match the simplified component. No backend changes — `PATCH /spoolman/inventory/filaments/{id}` route still exists for API consumers, just no longer wired to a UI.

### Fixed
- **Stats page widgets now match Quick Stats — every panel reads per-event data (#1390 follow-up, reported by @IndividualGhost1905)** — After #1378 moved Quick Stats and the run aggregates to `print_log_entries`, six widgets (Filament Used, Filament Cost, Filament Trends, Printer Stats By Weight / Time, By Material, Color Distribution) plus Failure Analysis still iterated the archive list. Two divergences fell out of that split. **Reprints**: each reprint of an archive adds a new `print_log_entries` row but the `print_archives` row gets overwritten in place, so event-based widgets counted N reprints while archive-based widgets counted 1. **Hard-deleted archives**: the foreign key is `ON DELETE SET NULL`, so the event survives as an orphan (`archive_id=NULL`) — Quick Stats kept counting it, archive-iterating widgets couldn't see it. The reporter's test server (14 archives / 52 events / 29 orphans confirmed by the diagnostic query) made the split very visible. Fix swaps the data source in two places: (1) `GET /archives/slim` (the only frontend caller is StatsPage, so every widget that consumes the `archives` query gets the per-event data in one step) now reads from `PrintLogEntry`, LEFT JOINs `PrintArchive` for the sliced `print_time_seconds` estimate (null for orphans, and downstream widgets already fall back to `actual_time_seconds` / `duration_seconds`), uses `PrintLogEntry.duration_seconds` as the authoritative measured-time field when present (the original computed-from-started/completed_at path is kept as the fallback so legacy event rows from pre-#1378 still surface time), and returns `quantity=1` per event since per-event semantics make the archive-level quantity multiplier meaningless (verified no StatsPage widget actually reads `quantity` — `grep -n "\\.quantity" frontend/src/pages/StatsPage.tsx` returns nothing); (2) `FailureAnalysisService` switched from `PrintArchive` to `PrintLogEntry` for every aggregation (totals, by reason, by filament, by printer, by hour, recent failures, weekly trend) — `project_id` filtering still resolves through the archive table (events don't carry a direct project link) but counts the matching events, not the archives. The conftest `archive_factory` already synthesizes a matching `PrintLogEntry` per archive (added when #1378 landed), so existing tests stay green; one small tweak there now syncs the synthesized event's `created_at` with the archive's so date-range filtered tests don't lose the event to `server_default=func.now()`. Three new regressions in `test_archives_api.py`: `test_slim_counts_reprints_as_separate_rows` (three reprints → three slim rows → 3× filament summed correctly), `test_slim_includes_orphan_events` (archive deleted, event survives, slim still returns it with `print_time_seconds=null`), `test_failure_analysis_counts_reprints_and_orphans` (a reprint of a failed archive + an orphan failed event both contribute to `failed_prints` and `failures_by_reason`). One existing assertion updated — the `test_slim_returns_only_expected_fields` test was asserting `quantity == 2` from an `archive_factory(..., quantity=2)` call, which no longer rounds-trips through the per-event endpoint; updated to `quantity == 1` with a comment pointing at the semantic shift. 4889 backend tests green, 31 StatsPage frontend tests green, ruff clean.
- **FTP upload no longer silently treats 426 "Failure reading network stream" as success (#1401, second root cause reported by @iitazz)** — Looking at the support bundle from @iitazz showed every FTP upload to their P2S (firmware 01.02.00.00) ending the same way: data channel sendall completes in ~200 ms at an impossibly high "speed" (7+ MB/s for files the printer can only actually receive at ~1–2 MB/s), then voidresp returns `426 Failure reading network stream. (error_temp)` from the printer, and Bambuddy proceeds — `WARNING FTP STOR confirmation not received for X (proceeding): 426 ...` followed immediately by `INFO FTP upload complete`. The print command then gets dispatched, the printer tries to parse what's actually a partial 3MF (the reporter's downloaded-from-printer 3MF was 458752 bytes — exactly `7 × 65536`, our FTP chunk size — for a 668025-byte source), and surfaces the "unable to parse 3mf file" error the reporter sees. Two stacked failures: a P2S firmware / TLS-data-channel quirk that severs the FTP data stream mid-transfer (separate investigation; #1401 doesn't fix that), AND the voidresp handler in `backend/app/services/bambu_ftp.py` swallowing the resulting 426 because the original comment assumed *"the data was fully sent so the file is likely on the SD card"* — true for socket-level timeouts where we just didn't HEAR the 226 in time (H2D needs 30+ s tolerance and we want to keep that), false for `426` where the printer is explicitly telling us *the data stream itself was cut*. Fix splits the broad `except Exception` into two branches: `except ftplib.Error` (covers `error_reply`, `error_temp`, `error_perm`, `error_proto` — the server *responded* with a failure on the control channel) logs at ERROR and re-raises, so the outer `except (OSError, ftplib.Error)` returns False and the dispatcher sees a real upload failure instead of green-lighting a print of a truncated file; `except Exception` keeps the existing proceed-with-warning behaviour for socket timeouts so the H2D 30-second voidresp tolerance survives. Same split applied to `upload_bytes()` since it had the same `except Exception: pass` shape. The reporter will still hit the underlying 426 (we haven't fixed the P2S transport problem yet — that's separate), but they'll now see an upload failure surfaced honestly rather than a confusing parse error 30 seconds into the print attempt. Tests: two new regressions in `TestUpload` patch `_ftp.voidresp` to raise `ftplib.error_temp("426 ...")` and assert both `upload_file()` and `upload_bytes()` return False. 18 upload-related tests green. The earlier-this-section validation fix is unrelated and stays — it still catches genuinely raw `.gcode` files at the upload step.
- **Upload validation rejects unprintable 3MF / raw-gcode files at the upload step instead of letting them fail at the printer (#1401, reported by @iitazz)** — Reporter sliced in OrcaSlicer, uploaded the result to Bambuddy, clicked Print, and the printer rejected with "Printing stopped because the printer was unable to parse the 3mf file" — every time, for multiple files, on both library uploads and SD-card-browsed files. Trace through the support bundle showed: (a) the stored library file ended in `.gcode` (not `.gcode.3mf`), and (b) `background_dispatch.py` constructs the FTP destination filename by appending `.3mf` when the source doesn't already end in `.gcode.3mf` / `.3mf` — so raw gcode gets shipped to the printer named `whatever.gcode.3mf` and the firmware's 3MF parser chokes on the missing zip header. The same shape also manifests as `Failed to parse plates from archive ... File is not a zip file` warnings on Bambuddy's side. Whether the user manually re-extensioned a file or their slicer saved as `.gcode` instead of `.gcode.3mf`, the right place to catch this is the upload, not the printer 30 seconds later. **New `validate_print_file_upload()` helper** in `backend/app/api/routes/library.py` runs two checks: (1) reject any filename ending in `.gcode` (but not `.gcode.3mf`) with a clear message — "Raw .gcode files can't be printed on Bambu printers in network mode — they need a .gcode.3mf zip container (gcode plus metadata). Re-export from your slicer and make sure the file ends in '.gcode.3mf', not just '.gcode'. If your OS hides extensions, double-check the file with the extension visible." (2) For any filename ending in `.3mf` (incl. the compound `.gcode.3mf`), verify the file body starts with `PK\x03\x04` (ZIP magic bytes); reject otherwise with a message pointing at the slicer's "Export Plate Sliced File" action. Suffix-based check rather than `os.path.splitext` because compound extensions like `.gcode.3mf` show up as just `.3mf` after splitext — both must trigger the same validation. **Applied to every relevant upload route**: `POST /library/files` (covers File Manager upload AND the printer-card drag-drop, which routes through the same endpoint), `POST /archives/upload` (single archive), `POST /archives/upload-bulk` (rejects bad files per-row instead of aborting the batch — one bad file in a 10-file drag-drop doesn't lose the other nine), `POST /archives/{archive_id}/source` (per-archive source 3MF), `POST /archives/upload-source` (slicer-post-processing match-by-name). Validation runs AFTER `_resolve_upload_destination` so folder-permission rejections (403 readonly, 400 missing-path, 409 collision) still take precedence — preserves existing error ordering. STL / image / other non-print uploads bypass the validator entirely; Bambuddy is also a library, not just a print dispatcher. **Frontend visibility fix** in `FileUploadModal.tsx` (same component used by File Manager + Printers page + Archives): the modal auto-closed after `setIsUploading(false)` regardless of per-file results, so a 400 rejection from the new validator was technically captured but never shown — the modal vanished too quickly. Now (a) errors render inline as red text under the file row instead of as a hover-only `title` tooltip, and (b) the modal stays open if any file ended with status='error', so the user can read the backend's actual remediation message before clicking Close. The bulk archive `UploadModal.tsx` was already showing inline errors and not auto-closing — that one didn't need the fix. **Tests**: 7 new integration tests in `TestPrintFileUploadValidation` cover: raw `.gcode` rejection at the library route (asserts the error message names the remedy), non-zip `.3mf` rejection, non-zip `.gcode.3mf` rejection (compound-extension code path), happy-path valid `.gcode.3mf` accepted, STL / non-print extensions still bypass, `POST /archives/upload` non-zip rejection, `POST /archives/upload-bulk` per-file error collection with mixed good/bad files in one request. Plus one fixture update in `test_external_folders_api.py` — `test_upload_persists_correct_db_shape` was uploading `model.3mf` with placeholder bytes `b"x"` to exercise the DB-shape path; updated to use a minimal real zip so the new validator doesn't block the unrelated test. 4968 backend tests green, 41 FileUploadModal frontend tests green, ruff + frontend build clean.

### Added
- **Inventory: Storage Location filter chip (#1400, reported by @pgladel)** — Reporter manages a lot of physical filament storage locations and wanted a quick way to narrow the inventory list to "what's in shelf A" / "what's in drawer 1" without typing a search query each time. Inventory page grows a new filter chip alongside the existing Material / Brand / Category / Spool Name dropdowns. Distinct storage-location values are pulled from the spool list and rendered as options; selecting one filters the table to spools assigned to that location. An additional **No location set** entry appears when at least one spool has an empty `storage_location`, so users can find unfiled spools the same way `categoryNone` works for unfiled categories. The chip self-hides when no spool has a storage location set (avoids noise on fresh installs). Pattern is identical to the existing Category chip from #729 — clear-all-filters and `hasActiveFilters` both include the new state. **Whitespace normalisation:** distinct-value extraction and filter comparison both `.trim()` the field so a spool whose location was saved as `"Shelf A "` doesn't render as a separate dropdown option from `"Shelf A"`. **i18n:** reuses the existing `inventory.storageLocation` label (already shipped for the spool-edit field — no duplication); adds a new `inventory.storageLocationNone` key, translated to all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). The "Extended Solution" from the issue (dashboard widget showing locations) is not in this change — open to revisiting if there's appetite. Parity check holds at 4818 leaves per locale. 24 InventoryPage tests in the existing suite still pass.

- **Smart plugs: auto-off after AMS drying completes (#1349, reported by @Kyobinoyo)** — Reporter asked for the equivalent of the existing print-finish auto-off, but triggered when an AMS drying cycle ends — so the smart plug that powers the printer + AMS combo cuts power once humidity has been driven out, without the user babysitting it. Shipped as a simple per-plug pair of fields that mirrors the existing print-finish auto-off shape. Per-AMS plug routing (separate plug for the AMS only, per-AMS targeting on dual-AMS printers) was scoped out for now — Bambuddy's plug model is plug→printer, not plug→AMS, so the trigger fires whenever any AMS attached to the linked printer finishes a dry cycle. **Two new SmartPlug columns** with a same-migration block in `database.py` (SQLite uses `BOOLEAN DEFAULT 0` / `INTEGER DEFAULT 10`; Postgres branches to `DEFAULT false` / `IF NOT EXISTS`): `auto_off_after_drying BOOLEAN` (defaults False so nobody opts in by accident); `off_delay_after_drying_minutes INTEGER` (defaults 10 — separate from the print-finish delay because the AMS chamber is hot post-cycle and users often want longer cooldown than the print-finish default of 5). **Trigger** is observed at the MQTT layer, not the scheduler — `BambuMQTTClient` now keeps a per-AMS `_previous_dry_times: dict[int, int]` and, every time `_handle_ams_data` finalises the merged AMS list, walks each unit looking for the `dry_time > 0 → 0` falling edge. When it fires, the new `on_drying_complete(ams_id)` callback runs, plumbed through `PrinterManager.set_drying_complete_callback` exactly the way `on_print_start` / `on_print_complete` already are. The seed-from-zero false positive (first MQTT push reports `dry_time=0` and the previous would otherwise read as 0→0) is guarded by the explicit `previous > 0` check, and the per-AMS state means dual-AMS printers can finish drying on AMS 0 and AMS 1 independently without the second one missing the edge. Observing the falling edge at the MQTT layer (rather than in `print_scheduler._sync_drying_state`) is deliberate: the scheduler's `_drying_in_progress` dict only tracks auto-drying initiated by the scheduler itself, so manually-triggered drying from the printer card would not fire there. The new path catches queue-triggered, ambient, AND manual drying identically because it observes firmware-reported state, not our own intent. **Manager hook** in `SmartPlugManager.on_drying_complete(printer_id, db)` mirrors `on_print_complete` but reads the drying-specific toggle, calls `_schedule_delayed_off` with `off_delay_after_drying_minutes` (always time-based — temperature-cooldown is meaningful for the printer hotend, not the AMS chamber, and Bambuddy doesn't track AMS chamber temperature). The HA-script guard from the print-finish path is preserved (scripts can be triggered but not turned off, so they're skipped). **Frontend** adds a single toggle + delay input on the Smart Plug card next to the existing "Auto Off" section: "Auto Off After Drying" and "Drying delay (minutes)". No changes to the Add Smart Plug modal beyond what the new fields require. **Backend tests** in `test_smart_plug_manager.py` cover the new shape: drying auto-off schedules with the correct per-plug delay; the toggle being off is a no-op even when `auto_off` (print-finish) is on; the master `enabled` flag still gates; HA script entities are skipped; printer with no linked plugs is a silent no-op. `test_bambu_mqtt.py` gets a new `TestDryingCompleteCallback` class covering the falling-edge firing once, the seed-from-zero non-fire guard, repeated zero-pushes after the edge not refiring, per-AMS independent tracking on dual-AMS units, and the "new cycle after completion refires" case (covers the user starting a second dry from the printer card). 4961 backend tests green; SQLite + Postgres 16 migration verified idempotent. **i18n**: 3 new keys (`autoOffAfterDrying`, `autoOffAfterDryingDescription`, `delayAfterDryingMinutes`) translated across all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). Parity check holds at 4817 leaves per locale.

### Changed
- **Bulk and scheduled archive purge now honour the soft / hard delete choice that single-archive delete already exposes (#1390 follow-up)** — Reporter IndividualGhost1905 followed up after the #1378 / #1343 backfill fix landed and pointed out the next inconsistency: the per-archive delete dialog has had a "Also remove from Quick Stats" checkbox since #1343, but the bulk "Purge Old" button and the scheduled daily auto-purge sweeper both ignored that choice and hard-deleted unconditionally. The "Purge Old" path called `archive_purge_service.purge_older_than` which routed through `ArchiveService.delete_archive` directly — dropped the archive row, the linked PrintLogEntry rows got `ON DELETE SET NULL` so they survived with `archive_id=NULL`, Quick Stats kept the filament / cost / energy contribution from the orphaned log rows but the archive-list-iterating widgets (Filament Trends / Printer Stats / By Material / Color Distribution) lost the contribution and Time Accuracy lost the join target. Visibly inconsistent, and "automatically deleted from statistics without any warning" was a fair characterisation of the half that did drop. Fix is to thread the same `purge_stats` parameter through every surface, defaulting to soft-delete (matches the single-archive default — files off disk, archive row hidden via `deleted_at`, Quick Stats fully preserved, all archive-list widgets keep showing the row). Three surfaces affected: (1) `POST /archives/purge` accepts `purge_stats` in the body, defaults False (soft); the response now echoes which mode ran. (2) `GET /archives/purge/preview` accepts the same flag as a query param so the count matches what a real purge would touch — soft mode excludes already-soft-deleted rows, hard mode counts them as eligible-for-promotion. (3) The auto-purge `archive_auto_purge_stats` setting (default False) controls whether the daily sweeper runs in soft or hard mode; the existing `_maybe_run_auto_purge` reads it on every tick. `ArchivePurgeRequest` / `ArchivePurgeSettings` schemas extended, `archive_purge_service.purge_older_than` and `preview_purge` take `purge_stats=False` kwarg, the existing single-row delete tests pass unchanged. Frontend: "Purge old archives" modal grew a checkbox below the preview ("Also remove from statistics" with a hint explaining the difference), and the Settings → Archives auto-purge card grew the matching toggle (disabled when auto-purge itself is off). Copy in the modal rewritten across all 8 locales to reflect that the default no longer "permanently removes from the database" but instead hides + removes files while keeping Quick Stats intact. **Behaviour change for existing auto-purge users:** the sweeper used to hard-delete by default and now soft-deletes by default. After the upgrade, existing auto-purge users will start *preserving* more data in Quick Stats rather than losing it — the safer direction of the two, but call it out. Users who want the old hard-delete behaviour can tick the new toggle once. 4 new integration tests in `test_archive_purge_api.py` pin the new contract: manual purge soft-deletes by default, manual purge hard-deletes when `purge_stats=true` body flag is set, auto-purge soft-deletes by default, auto-purge hard-deletes when the settings opt-in. Existing throttle/disabled tests still pass. 11 tests total in the file, all green; 4951 in the full backend suite. i18n parity check clean across all 8 locales.
- **Cloud login: corrected the access-token hint to reflect that Bambu Lab no longer surfaces the token in any UI, and called out the China-region constraint explicitly (#1396)** — Reporter wintsa123 filed that China-region users can't log into Bambuddy. The code path itself is fine: PR #1013 (April) already added the China-region selector to the login form and routes token validation to `api.bambulab.cn`. The actual gap was documentation. The old in-app `accessTokenHint` said "Paste your Bambu Lab access token (from Bambu Studio)" — but Bambu Studio never exposed the token in any UI, and the profile page on `bambulab.com` that used to show it is gone. For China-region accounts the email/password flow is fundamentally unusable because those accounts are bound to phone numbers, not email — token login is the only path, and the hint didn't say so. Updated `accessTokenHint` in all 8 locales (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW) to state that China accounts must use this path and point at the wiki for the MakerWorld-cookie retrieval procedure. Wiki page `features/cloud-profiles.md` also rewritten under "Access Token Login": adds a "Region: China must use token login" note, replaces the dead "from Bambu Studio" guidance with the working MakerWorld-cookie method (browser DevTools → Application → Cookies → `token`), keeps the Python-script alternative for global-region accounts, and flags that the cookie value is sensitive. No backend changes — the token-validation endpoint accepts both `global` and `china` regions and routes to the right API host already.

### Fixed
- **Virtual Printer (queue / immediate / review modes): AMS data flickered or disappeared in BambuStudio between pushalls on P1S/A1 targets (#1387)** — Reporter vmhomelab ran a Print Queue VP against a P1S, opened BambuStudio, and saw the External Spool only — no AMS. Toggling Auto-Dispatch (which triggers a VP restart) made AMS briefly appear, then it reverted to defaults. Proxy Mode worked fine. The earlier #1371 sticky-keys fix only handled one of two Bambu firmware incremental-push shapes: it preserved cached AMS when the incoming push *omitted* the `ams` key entirely (H2D's common incremental shape). The reporter's P1S firmware (01.09.01.00) instead sends incrementals with the `ams` key present but the inner `ams.ams` array stripped — `{ams_status: 1, humidity: 2}` instead of `{ams: [...], ams_status: 1}`. To the previous sticky-keys check that read as "key present, leave new state alone," so the bridge cache got overwritten with the stripped blob; the slicer's next 1 Hz read saw `ams` with no unit list and fell back to the "no AMS" default render. Toggling Auto-Dispatch restarted the VP and got a fresh pushall in; the next P1S incremental stripped it again. (H2D rarely hits this — its incrementals typically don't carry `ams` at all, so #1371 alone was enough there. The reporter's same-VP-architecture pinging both an H2D and a P1S would observe the H2D works while the P1S doesn't, which is exactly the split that surfaced this.) Fix is a deep-merge applied to the `ams` key inside the bridge cache, mirroring the structure Bambuddy itself already does in `bambu_mqtt.py::_handle_ams_data` (which is why Bambuddy's own AMS display stays coherent on the same firmware): scalar fields like `ams_status` and `humidity` take the new value, but the `ams.ams` array is merged unit-by-unit on `id`, each unit's `tray` array is merged tray-by-tray on `id`, and units / trays the incremental doesn't mention survive intact from the cached full state. A tray-targeted incremental during a print like `{ams: [{id: 0, tray: [{id: 0, state: 11}]}]}` now updates that one tray's state without nuking the other three trays' tray_type/tray_color. Helper added as `_merge_ams_dict` in `backend/app/services/virtual_printer/mqtt_bridge.py` next to `_ip_to_uint32_le`, called from the existing sticky-keys block. Three new regression tests under `TestPushStatusCache` in `backend/tests/unit/test_vp_mqtt_bridge.py` cover the status-only partial (the reporter's exact reproduction), the multi-AMS unit-level merge, and the multi-tray merge. The existing `test_incoming_ams_update_replaces_cached_ams` still passes — fresh full updates still take effect, the merge only protects the cache from stripped incrementals. 32 tests total in that file, all green. Verified the cross-subnet topology from the report (printer / Bambuddy / slicer each on a different /24) is incidental: the symptom is the same regardless of subnet once the partial-shape arrives; the latency just makes the "empty cache when slicer first connects" race more visible. ProxyMode is unaffected because Proxy is raw byte-forwarding rather than a cached-as-base mirror — it never had this class of bug.
- **Quick Stats showed Filament Cost = 0 and empty Time Accuracy on pre-upgrade data after the 0.2.4.1 stats rewrite (#1390)** — Reporter IndividualGhost1905 upgraded to 0.2.4.1 (which shipped the per-event aggregation rewrite from #1378) and saw the Stats page split between consistent values (Total Prints / Print Time / Filament Used / Energy / Success Rate matched the archive list) and zero-or-empty ones (Filament Cost, Time Accuracy). Inconsistency was a migration gap: #1378 added six columns to `print_log_entries` — `archive_id`, `cost`, `energy_kwh`, `energy_cost`, `failure_reason`, `created_by_id` — but **didn't backfill any of them**. So every pre-upgrade log entry kept NULL on all six. The new Quick Stats query sums `PrintLogEntry.cost` (gets 0 for legacy data); the time-accuracy query joins `PrintArchive ON archive_id` (drops every legacy run from the average). Counts and per-row fields that already existed pre-#1378 (`status`, `duration_seconds`, `filament_used_grams`) kept working — which is why some panels looked right and others didn't. Fix is a two-step backfill in `run_migrations` next to the existing column-add block (DML, runs inside `begin_nested()` not `_safe_execute` since the latter is documented "DDL only"): step 1 links each orphan log entry to its archive via `print_name + printer_id` (highest archive `id` wins on tiebreak — newest matches the overwrite-then-stop shape that pre-#1378 reprints left behind); step 2 copies `archive.cost / energy_kwh / energy_cost` onto the latest matching log entry per archive, **but only for archives where no log entry yet carries a cost**. That second clause is the idempotency anchor and also the double-count guard for users running this migration after #1378 has already written cost-bearing rows for new runs — those archives are left untouched. Earlier reprints stay NULL, matching the "first/latest writes, rest stay NULL" convention #1378 introduced. Sum across the legacy reprint chain reproduces sum-of-archive-cost exactly, so the Quick Stats Filament Cost column matches the pre-upgrade total instead of dropping to zero. SQL is plain ANSI — correlated UPDATE with `LIMIT 1` in the SET subquery, `WHERE id IN (SELECT MAX(id) ... GROUP BY archive_id HAVING SUM(CASE WHEN cost IS NOT NULL THEN 1 ELSE 0 END) = 0)` — verified end-to-end on both SQLite (4 unit tests in `test_print_log_backfill_migration.py`) and `postgres:16-alpine + asyncpg` (live container reproduction). For the other widgets the reporter listed (Printer Stats, Filament Trends, By Material, Success by Material, Color Distribution) — those still iterate the archives list on the frontend rather than calling /stats, so they read consistent pre-upgrade data and aren't part of this fix; the inconsistency the reporter saw between Quick Stats and those widgets resolves itself once the backfill brings Quick Stats in line.
- **Spoolman: spool "Color Name" edits silently never saved — Bambuddy was writing to a field Spoolman doesn't have (#1357)** — Reporter pgladel edited a spool's Color Name in Spoolman mode, hit Save, and saw the value snap back to the subtype on the next read. Martin shipped #1319 in May to handle "form round-trips the synth value back as if it were user input" — that fix's read/form-prefill half was correct (the `color_name_is_synthesized` flag, the blank-on-synth form init), but the **write half assumed Spoolman has a `color_name` field on Filament**. It doesn't. Verified against the live `FilamentUpdateParameters` schema on Spoolman 0.23.1: `name`, `vendor_id`, `material`, `price`, `density`, `diameter`, `weight`, `spool_weight`, `article_number`, `comment`, `settings_extruder_temp`, `settings_bed_temp`, `color_hex`, `multi_color_hexes`, `multi_color_direction`, `external_id`, `extra` — that's the lot. No `color_name`. Spoolman's PATCH happily returns 200 for `{"color_name": "Red"}` and just **silently discards the unknown key**. So `find_or_create_filament` was either patching a void or creating filament after filament with the same field-that-doesn't-stick (which is what produced the reporter's "BB also created a bunch of new filaments" trail of duplicates on each save attempt). The fix takes the same route as the existing BambuStudio slicer-preset storage: persist color_name on `spool.extra.bambu_color_name` as a JSON-encoded string, register the extra field via `ensure_extra_field` before write (Spoolman 400s on unknown extra keys), and read it back in `_map_spoolman_spool` with priority `spool.extra.bambu_color_name → filament.color_name (forward-compat for any future Spoolman release that adds it) → subtype synth`. Also dropped the now-dead `color_name` passing through `find_or_create_filament` and `create_filament` — Spoolman would discard it anyway and keeping the dead pipe risked the same confusion the next time someone reads this code. The previous "match by name then patch color_name" loop is gone; what survives is the name-match resilience added earlier this turn so an AMS-sync-created filament named `"Glow"` still matches the user-driven edit's composed `"PLA Glow"`, which prevents the duplicate-filament trail. The frontend form's `color_name_is_synthesized` handling is unchanged — that part already worked. Tests rewritten across the three affected suites (`test_spoolman_inventory_methods.py`, `test_spoolman_inventory_helpers.py`, `test_spoolman_inventory_api.py`) to pin the new contract: filament patch never carries `color_name`, route writes to `bambu_color_name` extra, read prefers extra over filament-field over synth. Verified end-to-end against the live Spoolman instance at the reporter's setup (PATCH /filament with color_name → field absent from response; PATCH /spool with extra.bambu_color_name → field present in response).
- **Add Smart Plug (HA mode) — search dropdown let users pick entities the schema would reject, surfacing as a cryptic regex error on Save (#1388)** — Reporter MartinNYHC opened the Add Smart Plug dialog, typed a search prefix matching a multi-entity HA device (a Shelly-style outlet exposing one `switch.*` and several `sensor.*` / `binary_sensor.*` siblings under the same friendly-name prefix), clicked one of the entities, filled in the optional power/energy sensors, and clicked Save. The backend returned 422 with the raw Pydantic message `String should match pattern '^(switch|light|input_boolean|script)\.[a-z0-9_]+$'`. After the dropdown closed and the search cleared, the entity-list refetch (with no search param) returned the default-domain-filtered list — which didn't include the user's pick — so `selectedEntity = haEntities.find(...)` was undefined, the field rendered as visually empty (placeholder shown), but `haEntityId` still held the bad value the user had selected. Root cause was at `backend/app/services/homeassistant.py::list_entities`: when a search query was present, the function bypassed the domain filter entirely and returned matches across every HA domain — including ones the `SmartPlugBase.ha_entity_id` regex at `backend/app/schemas/smart_plug.py:17` could never accept. Offering a clickable choice the user can't save is broken UX; the fact that the error message then said `switch|light|input_boolean|script` made it look like a schema problem rather than a search-permissiveness problem. Fix: the allowed-domains filter (`{"switch", "light", "input_boolean", "script"}`, kept in sync with the schema regex) now always runs, and search composes on top of it as an additional substring match against `entity_id` or `friendly_name`. Whitespace-only search strings are treated as no search. Verified the smart-plug code path is unchanged between 0.2.4 and 0.2.4.1 — this bug was latent since the script-domain commit in February 2026 and was only noticed now because the reporter hadn't reopened the modal in months. 5 new regression tests in `backend/tests/unit/services/test_homeassistant_list_entities.py` cover the no-search baseline, the search-still-domain-filters case (the actual #1388 reproduction), the entity_id-or-friendly_name substring match, case-insensitivity, and the whitespace-only edge case.
- **H2S with no AMS could not start a print — firmware rejected the dispatch with `07FF_8012` "Failed to get AMS mapping table" (#1386)** — Reporter krootstijn (H2S + no AMS) clicked Print and got an immediate firmware error. Two stacked misclassifications had quietly added H2S to the dual-nozzle code paths over time. The first was in `start_print_job` at `backend/app/services/bambu_mqtt.py:3168` — the `is_h2d` flag was set true for `("H2D", "H2D PRO", "H2DPRO", "H2C", "H2S", "X2D")`. That single flag controlled both the firmware bool→int format (legitimately needed for the whole H-family) *and* the external-spool routing branch (`ext_ams_id = tray_id if is_h2d else 255`) which is only correct for actual dual-nozzle printers. With no AMS, the external-spool sentinel is `254`; the dual-nozzle branch wrote `ams_id=254` into `ams_mapping2` instead of the canonical `255`. The exact failure shape (`07FF_8012`) is even called out in the comment six lines above the bad line — H2S was getting routed straight into the path the comment warned against. The second misclassification was the use_ams=False fallback at `bambu_mqtt.py:3213` (`if ams_mapping and use_ams and not is_h2d`) — meant to skip the safety drop on dual-nozzle printers where `use_ams` controls nozzle routing — also skipped H2S, so the firmware never got a chance to fall back to external-spool mode. A third site at `bambu_mqtt.py:3987` (and its sibling at `backend/app/api/routes/kprofiles.py:119`) classified dual-nozzle by serial prefix `("094", "20P9", "31B8B")`, which is wrong because H2S shares prefix `094` with H2D. Fix splits the conflated flag into two: `is_h_family` (firmware-format gate, includes H2S) and `is_dual_nozzle` (routing/use_ams gate, excludes H2S; prefers the runtime `_is_dual_nozzle` flag set from `device.extruder.info` and falls back to model name for the brief window right after connect). The K-profile delete and the edit route now use the same two-source check instead of the serial prefix. Empirically verified across 9+ stored H2S support bundles (`nozzle_count: 1` in every one) and the reporter's bug log (`07FF_8012` immediately after dispatch). Four new regression tests: `test_h2s_single_external_spool_uses_main_id`, `test_h2s_no_ams_forces_use_ams_false`, `test_h2s_keeps_integer_format_for_calibration_fields`, plus a new `test_h2s_uses_single_nozzle_format` in the K-profile suite. The K-profile detection tests were also updated to set both model name and runtime flag rather than relying on serial prefix, since the source-of-truth has shifted.

## [0.2.4.1] - 2026-05-16

### Changed
- **Support bundle audited for new features — adds OIDC, 2FA, API keys, library/inventory/queue/maintenance totals, slicer-API reachability, GitHub backup status, per-printer Obico flag; also redacts two settings that were leaking and fixes a reachability-check architecture bug** — The `support-info.json` block in support bundles auto-includes the `settings` table (with sensitive-key redaction), so settings-stored features like LDAP, Obico globals, integrated slicing URLs, Tailscale, and queue-drying already flowed through. What was missing was anything stored in **dedicated tables**, which had grown substantially without the bundle being updated. Triaging the recent OIDC / 2FA / group bugs (#1292, #1297) and the X1C slicer investigation involved repeatedly asking reporters for information that should have been in the bundle. New blocks added to `_collect_support_info` in `backend/app/api/routes/support.py`: **`auth`** — OIDC providers (cleartext `name`, `is_enabled`, `scopes`, `email_claim`, `require_email_verified`, `auto_create_users`, `auto_link_existing_accounts`, `has_default_group`, `has_icon`, `linked_user_count`; `client_id`/`client_secret`/`issuer_url` stay out of the bundle), 2FA counts (`users_with_totp`, `email_otp_codes_pending`), API key counts (`total` / `enabled` / `expired`), long-lived token counts (`total` / `active`), group counts (`system` / `custom`). **`library`** — `library_files_total`, `library_files_in_trash`, `library_folders_total`, `external_folders_total`, `external_links_total`, `makerworld_imports_total`. **`inventory`** — `spools_internal`, `k_profiles_internal`, `k_profiles_spoolman`. **`queue`** — `pending_total`, `manual_start_pending`, `oldest_pending_age_seconds` (catches items stuck because their target printer is offline or filament doesn't match). **`maintenance`** — `items_total`, `items_enabled`. **`integrations.github_backup`** — `configs_total`, `providers_used` dict (github/gitea/forgejo/gitlab), `schedule_enabled_count`, `last_failure_count`. **`integrations.slicer_api`** — `enabled`, `preferred`, `bambu_studio_url_set`, `orcaslicer_url_set`, plus an actual 2-second HTTP reachability ping (`bambu_studio_reachable`, `orcaslicer_reachable`) to differentiate "URL empty" from "URL misconfigured" from "service down". **Per-printer `obico_enabled`** flag added to each entry in `printers[]`, parsed from `obico_enabled_printers` setting via a new `_parse_obico_enabled_printers` helper that tolerates legacy comma-separated formats. **Plus three smaller but important fixes caught while testing the bundle against a real instance**: (1) **`mqtt_broker` value was leaking** — the keyword-substring redaction filter at `support.py:850` had no entry that matched the `mqtt_broker` setting name, so the broker IP (e.g. `192.168.255.16`) was appearing in cleartext. Added `broker` to `sensitive_keys`. (2) **`virtual_printer_tailscale_auth_key` was leaking** — same reason, no keyword in the filter matched `_auth_key`. Added `auth_key` to the keyword set, AND added a value-prefix safety net (`tskey-`) so any FUTURE Tailscale setting with an unexpected name still auto-redacts when its value starts with the Tailscale auth-key prefix. (3) **Slicer-API reachability check was always returning `null` / `false` even when the slicer was up** — two root causes stacked. First, the old code passed `info["settings"]` (already redacted) into `_collect_slicer_api_info`, so when `bambu_studio_api_url` had been redacted to `"[REDACTED]"`, the httpx call hit that literal string and crashed; when the setting was empty, the URL came through as `""` and the function returned `None`. Second — caught on the next round of testing — even after switching to read directly from `Settings.value`, the check only looked at the DB row, but the real slicer routes (`archives.py:3174-3180`, `library.py`) resolve the URL with a three-level precedence: DB setting → `app_settings.bambu_studio_api_url` (which reads the `BAMBU_STUDIO_API_URL` env var) → built-in default `http://localhost:3001`. Most installations run the sidecar on the default port or via env var, so the DB-only check returned `null` even when the slicer was up and reachable. The collector now mirrors the route's exact resolution path. The block now also reports `bambu_studio_url_set_in_db: bool` and `bambu_studio_url_source: "db" | "env_or_default" | "unset"` so triage can see WHICH layer supplied the URL — separates "user explicitly configured it" from "they're using the default port" without leaking the URL itself. Two regression tests pin both layers: `test_reachability_uses_unredacted_url` (no `"[REDACTED]"` ever reaches `_check_url_reachable`) and `test_env_var_fallback_url_pinged_when_db_setting_empty` (DB empty + env-var-set URL is actually pinged and reported reachable). All new collectors are wrapped in `try/except` so a single failure on one block can't blank the rest of the bundle. OIDC provider names are passed in cleartext deliberately — they're login-button labels (`PocketID`, `Authentik`, `Google`, etc.), not secrets, and provider-specific behavior (Azure handles claims differently from Authentik) is exactly the kind of detail that makes SSO bugs triagable in one round-trip instead of three. 13 new unit tests in `backend/tests/unit/test_support_helpers.py` cover the obico-parser edge cases, slicer-API reachability with mocked httpx (including the "404 = reachable" decision, the un-redacted-URL regression, AND the env-var-fallback regression), auth-info OIDC-cleartext-but-no-secrets contract, the GitHub-backup provider/failure aggregation, and the new `mqtt_broker` / `virtual_printer_tailscale_auth_key` / value-prefix-based redactions.

- **Page headers unified across the app: consistent icon size, placement, and subtitle styling** ([PR #1272](https://github.com/maziggy/bambuddy/pull/1272) by @EdwardChamberlain, continuation of #1060 / #1203) — Nine pages (Archives, FileManager, Inventory, Maintenance, MakerWorld, Profiles, Projects, Settings, Stats) now share one header pattern: `w-7 h-7 bambu-green icon` next to a `text-2xl font-bold` title with a `text-bambu-gray mt-1` subtitle underneath, matching the look that landed earlier on Print Queue and Printers. FileManager and Projects dropped their rounded `bg-bambu-green/10 rounded-xl p-2.5` icon tile in favor of the plain icon to match the rest. The sidebar's "Queue" nav item is renamed to "Print Queue" (and its icon switched from `Calendar` to `ListOrdered`) to match the page header it leads to. The Stats page title is renamed `Dashboard → Statistics` to match the sidebar nav label that's been pointing at it (the page never was the printer dashboard — Printers is — and the mismatch confused new users; closes a small but recurring source of "where's the dashboard?" support questions). All renames flow through every locale: en/de/fr/it/ja/pt-BR/zh-CN/zh-TW updated for `nav.queue`, `stats.title`, plus a new `inventory.subtitle` key ("Manage your spools" + translations) used by the inventory header. Bonus on top of the stated scope: `inventory.toolbar.{filters, view, actions}` were untranslated English strings in fr/it/ja/pt-BR/zh-CN/zh-TW — Edward translated them properly in the same pass. `StatsPage.test.tsx` updated to assert the new "Statistics" title. Build clean, all 35 page tests still pass, i18n parity holds at 4753 leaves across all 8 locales. Maintenance page subtitle keeps its red / amber / green severity color on the "X items due · Y warnings · all up to date" line — the colors carry actual at-a-glance status information, not just visual weight.

- **Bambuddy now identifies honestly as itself on every outbound request to Bambu Lab / MakerWorld / Bambu Wiki** — proactive alignment with Bambu Lab's [2026-05-12 statement on cloud access](https://blog.bambulab.com/setting-the-record-straight-on-cloud-access-and-community/), which draws a clear line between modifying AGPL code (allowed) and "impersonating official clients in communication with our cloud infrastructure" (not allowed). Bambuddy was already on the right side of that line on the main authenticated cloud path (`User-Agent: Bambuddy/1.0` in [`bambu_cloud.py:_get_headers`](backend/app/services/bambu_cloud.py)), but three secondary call sites were sending browser User-Agents — originally added under the assumption Cloudflare's WAF would block non-browser identification. Tested on 2026-05-12 with `curl -H "User-Agent: Bambuddy/1.0"` against all three: `https://bambulab.com/api/sign-in/tfa` returned HTTP 400 with the expected application-level `{"code":5,"error":"Login failed"}` JSON (no Cloudflare interstitial), `https://api.bambulab.com/v1/iot-service/api/slicer/setting` returned HTTP 200 with the full 576 KB settings response, `https://makerworld.com/api/v1/design-service/*` returned the same response shape as a Firefox UA, and `https://wiki.bambulab.com/*` served identical HTML to a Chrome UA. The browser-impersonation was unnecessary. All four call sites now send `Bambuddy/1.0 (+https://github.com/maziggy/bambuddy)` consistently — the URL in parens makes the source unambiguous so Bambu can distinguish our traffic from impersonators if they ever audit it. Files: [`bambu_cloud.py`](backend/app/services/bambu_cloud.py) (TOTP/TFA path no longer spoofs Chrome UA + Origin + Referer + Accept-Language headers — Origin/Referer were spoofing `bambulab.com` origin, which the new comment block specifically calls out as removed), [`makerworld.py`](backend/app/services/makerworld.py) (Firefox UA replaced; the Referer header is kept because MakerWorld's CSRF / origin-check middleware uses it on some endpoints, which is functional, not identity-faking), [`firmware_check.py`](backend/app/services/firmware_check.py) (Chrome UA on the public wiki scraper replaced — wiki has no special handling for our UA). Separately: the [`/v1/iot-service/api/slicer/setting`](backend/app/services/bambu_cloud.py) endpoint requires a `version` query parameter in Bambu Studio's XX.YY.ZZ.WW format (the API returns HTTP 400 "field 'version' is not set" without it, and HTTP 422 "Invalid input parameters" for non-matching formats like `bambuddy-1.0`), but Bambu's server accepts ANY value within that format — verified the same 576 KB response with `version=99.99.99.99`. The previous default `"02.04.00.70"` is an actual Bambu Studio release version (2.4.0.70). The default is now `"1.0.0.0"` (held in a new `_SLICER_API_VERSION` module constant in [`bambu_cloud.py`](backend/app/services/bambu_cloud.py) and re-exported into [`routes/cloud.py`](backend/app/api/routes/cloud.py) so the two route defaults stay in sync), which satisfies the format requirement without claiming to be a specific Bambu Studio build. Unchanged on purpose: `version="2.0.0.0"` parameters in `create_setting` / `update_setting` payloads are the **preset's** format version (extracted from `current.get("version", "2.0.0.0")` for updates, line 443) — they describe the preset schema, not the client, and stay as-is. Two regression tests rewritten to lock in the new behavior: `test_verify_totp_uses_honest_bambuddy_user_agent` (was `test_verify_totp_includes_browser_headers` — asserts UA starts with `Bambuddy/`, asserts `Mozilla`/`Chrome`/`Origin`/`Referer` are not present) and `test_sends_honest_bambuddy_user_agent` (was `test_sends_browser_like_headers` — same shape, plus continues to assert the deprecated `x-bbl-*` Bambu-app identification headers are still gone). All 4598 backend tests pass.

- **Spoolman weight tracking now uses per-print grams for all spools, matching the internal Filament Inventory** ([#1119](https://github.com/maziggy/bambuddy/issues/1119), reported by @Moskito99) — Spoolman previously had two mutually-exclusive weight paths: AMS remain%×tray_weight auto-sync (default; only worked for Bambu Lab spools with valid RFID tray_weight) and per-print 3MF-grams tracking (only enabled when "Disable AMS Weight Sync" was toggled on). Non-BL spools without RFID fell through both paths — AMS auto-sync had no tray_weight to multiply, and the inventory_remaining fallback was wiped because activating Spoolman deletes the internal `spool_assignment` table — so Spoolman never saw a weight update for them. The internal Filament Inventory has no such gap: it always uses per-print 3MF grams as the primary path with AMS-remain% delta as fallback, and it works for every spool type. Spoolman now does the same: per-print tracking runs whenever Spoolman is enabled and is the only writer of `remaining_weight`. AMS auto-sync continues to maintain spool metadata and slot assignments but no longer touches weight (eliminating the double-count that would otherwise occur for BL spools with both paths active). `store_print_data` ([`spoolman_tracking.py:159`](backend/app/services/spoolman_tracking.py)) had its `disable_weight_sync` early-return removed; the three `sync_ams_tray` callsites (`main.py:1450` auto-sync, `spoolman.py:318` per-printer manual, `spoolman.py:517` sync-all) now hard-code `disable_weight_sync=True`. The `spoolman_disable_weight_sync` setting is now deprecated and a no-op — kept in the DB/UI for backwards compat. Behavioral consequence for existing users on the default flag (False): live AMS-based remaining_weight updates between prints stop happening; weight updates now arrive once per print completion with 3MF gram precision. Regression test in `test_spoolman_tracking.py::test_stores_tracking_when_disable_weight_sync_is_false` proves the early-return is gone.

### Added
- **Manual LDAP user provisioning from the UI** ([#1298](https://github.com/maziggy/bambuddy/issues/1298), reported by @Fuechslein) — Until now the only way to onboard an LDAP user was to leave `Auto-provision` on and have them log in once, because the create-user form had no LDAP awareness — admins who wanted to disable auto-provision had to hand-edit the database to create the row. The user-create modal now grows a `Local / LDAP` tab toggle (visible only when LDAP is enabled in settings, so non-LDAP installs see no UI change). The LDAP tab is a directory search: type ≥2 characters and the new `GET /auth/ldap/search` endpoint uses the service-account bind to query the directory with a fixed OR filter across `sAMAccountName`, `uid`, `mail`, `displayName`, and `cn` (covering both Active Directory and OpenLDAP layouts; user input is RFC-4515 escaped so a typed `*` doesn't enumerate the whole tree). Each result is annotated with `already_provisioned` so usernames that already exist as BamBuddy users render dimmed and disabled. Picking a result and clicking **Provision user** hits `POST /auth/ldap/provision`, which re-resolves the username via the service bind (rather than trusting the client payload) and calls the same `_provision_ldap_user` helper the auto-provision login path uses — so group mapping, default-group fallback, and email sync behave identically regardless of which path created the user. Distinct error responses cover the failure modes (`400` LDAP disabled / query too short, `404` directory miss, `409` username already exists locally vs. already-provisioned LDAP user, `503` directory unreachable with the underlying ldap3 exception class + message in the detail field so the operator can diagnose without reading backend logs). Backend refactor extracts `_open_service_connection` + `_extract_user_info` helpers in [`backend/app/services/ldap_service.py`](backend/app/services/ldap_service.py) so the new `lookup_ldap_user` and existing `authenticate_ldap_user` share the bind + attribute-extraction paths (POSIX `memberUid` + primary `gidNumber` + case-insensitive DN dedupe stay in one place). **Two ldap3 schema-check workarounds for OpenLDAP installs** (caught in user testing against an OpenLDAP directory): (1) the directory-search connection is opened with `check_names=False` because ldap3's client-side filter validation rejects the AD-only `sAMAccountName`/`displayName` names in the cross-schema OR filter before any packet is sent; (2) the search requests `attributes=["*"]` (all user attributes) rather than the explicit AD-flavoured name list, because ldap3's `build_attribute_selection` validates each named attribute against the server schema *independently* of `check_names` and only the `*` wildcard is in its hard-coded `ATTRIBUTES_EXCLUDED_FROM_CHECK` exclusion list — so a list like `["sAMAccountName", "uid", ...]` still throws `LDAPAttributeError` on OpenLDAP. The login/lookup paths (`authenticate_ldap_user`, `lookup_ldap_user`) keep `check_names=True` so typos in the configured `user_filter` setting still fail loudly. New shared frontend component `<LdapUserPicker>` in [`frontend/src/components/LdapUserPicker.tsx`](frontend/src/components/LdapUserPicker.tsx) handles the debounced search (300 ms, min 2 chars), result list, selection, and provision mutation; it's rendered from **all four** create-user modal paths — basic + advanced-auth in [`UsersPage.tsx`](frontend/src/pages/UsersPage.tsx), basic + advanced-auth in [`SettingsPage.tsx`](frontend/src/pages/SettingsPage.tsx) (the latter being the "Add User" inside Settings → Authentication, which uses a separate modal flow from the dedicated Users page) — and the shared [`CreateUserAdvancedAuthModal`](frontend/src/components/CreateUserAdvancedAuthModal.tsx) gains a `ldapEnabled` + `onLdapProvisioned` prop pair so both pages drive the same component. i18n: 14 new keys under `users.modal.ldap*` + `users.modal.{localTab,ldapTab,tabsAriaLabel}` + 1 toast key in `frontend/src/i18n/locales/en.ts` (other 7 locales fall back to English per project convention). The wiki at [`features/authentication.md`](https://wiki.bambuddy.cool/features/authentication/) was also corrected — the prior "When disabled, an admin must pre-create the user in BamBuddy" line was misleading (no UI path existed) and now describes the new search-and-provision flow. **Regression tests:** 14 unit tests in [`backend/tests/unit/services/test_ldap_service.py`](backend/tests/unit/services/test_ldap_service.py) cover the filter shape, wildcard escaping, username-canonical fallbacks (sAMAccountName → uid → cn), bind-failure propagation, the no-password-bind contract of `lookup_ldap_user`, and pin both ldap3 schema-check workarounds (`check_names=False` on the search connection + `attributes=["*"]` so OpenLDAP doesn't reject the request). 12 integration tests in [`backend/tests/integration/test_ldap_provision.py`](backend/tests/integration/test_ldap_provision.py) cover auth gating, short-query rejection, LDAP-disabled rejection, `already_provisioned` annotation, the 4xx/5xx error matrix, and a happy-path provision that verifies `auth_source=ldap`, `password_hash=None`, and group-mapping inheritance from the auto-provision path. 5 frontend tests in [`LdapUserPicker.test.tsx`](frontend/src/__tests__/components/LdapUserPicker.test.tsx) cover the debounce, the search → select → provision flow, already-provisioned rows rendering disabled, and surfaced provision errors. 65 LDAP-related backend tests + 5 picker tests pass; full backend ruff clean; frontend build clean.
- **Slice modal: pick the build plate (#1337, reported by @digitalskies)** — Slicing a plain STL through the integrated slicer always defaulted to whatever `curr_bed_type` lived in the chosen process preset (typically `Cool Plate`), which the slicer CLI then rejected for high-temp filaments with `Plate 1: Cool Plate does not support filament 1`. The user had no way to switch plates short of cloning the process preset in BambuStudio, which defeats the point of the in-app slicer. The Slice modal now exposes a `Build plate` dropdown with the six canonical BambuStudio / OrcaSlicer plates (Cool Plate, Cool Plate SuperTack, Engineering Plate, High Temp Plate, Textured PEI Plate, Smooth PEI Plate) plus an explicit `Auto (use process preset)` option that preserves the previous behavior. The dropdown sits between Process profile and Filament rows so it stays visible regardless of how many filament slots the picked plate uses (a long filament list would otherwise push it off the modal's `max-h-[85vh]` scroll viewport) and is **always enabled** — including when the user picks a Printer Preset Bundle from the top BundlePicker. When the user picks a specific plate, the new `bed_type` field on `SliceRequest` ([`backend/app/schemas/slicer.py`](backend/app/schemas/slicer.py)) flows through the dispatcher via two paths: (1) **resolved-preset path** — the route helper `_patch_process_bed_type` in [`backend/app/api/routes/library.py`](backend/app/api/routes/library.py) overwrites `curr_bed_type` on the resolved process JSON before forwarding to the sidecar (no preset cloning required); (2) **bundle dispatch path** — `slice_with_bundle` in [`backend/app/services/slicer_api.py`](backend/app/services/slicer_api.py) adds a `bedType` form field to the sidecar multipart so the sidecar can pass `--curr_bed_type` through to the CLI, which lets the override take effect even though Bambuddy can't patch the bundle's process JSON locally (the sidecar materialises it from the stored .bbscfg). Sidecar versions that don't recognise the field silently no-op — the slice still runs, just with the bundle's default plate; the slicer-API fork at maziggy/orca-slicer-api will need the matching change for the bundle path to take full effect. **i18n parity:** 8 new keys (`slice.bedType.{label,auto,coolPlate,coolPlateSuperTack,engineering,highTemp,texturedPEI,smoothPEI}`) added to all 8 locales — full German translation, English fallbacks elsewhere per project convention. **Regression tests:** 4 in [`test_slice_request_bed_type.py`](backend/tests/unit/test_slice_request_bed_type.py) (`bed_type` defaults to None, accepts the six canonical strings, rejects overlong input via the schema's `max_length=64`; `_patch_process_bed_type` overwrites an existing value, adds the field when missing, and returns the input unchanged for malformed JSON or non-dict roots), 4 in [`test_library_slice_api.py`](backend/tests/integration/test_library_slice_api.py) (resolved-preset path: with `bed_type` set, the sidecar receives `"curr_bed_type": "Textured PEI Plate"` in the presetProfile multipart part; without it, `curr_bed_type` stays out of the body entirely. bundle dispatch path: `bedType` form field carries the override through to the sidecar; omitting `bed_type` keeps the form field out of the request so the bundle's own `curr_bed_type` is preserved), 2 in [`SliceModal.test.tsx`](frontend/src/__tests__/components/SliceModal.test.tsx) (dropdown selection puts `bed_type` on the request; leaving it on Auto omits the field). 59 backend slice tests + 34 SliceModal tests pass; build and i18n parity script clean.

### Fixed
- **In-app updater no longer fails with "Failed to fetch updates" when a tag on the remote was re-pointed** — Symptom on native installs upgrading from 0.2.4: clicking *Settings → System → Updates → Apply Update* aborted with `Git fetch failed: From https://github.com/maziggy/bambuddy ... ! [rejected] v0.2.1 -> v0.2.1 (would clobber existing tag)` even though `origin/main` and the target release tag fetched cleanly. `_perform_update` in [`backend/app/api/routes/updates.py:526`](backend/app/api/routes/updates.py) ran `git fetch --prune --tags origin`, which returns a non-zero exit if even one local tag would be overwritten by a moved upstream tag — and any non-zero exit was surfaced to the user as a hard failure, leaving them stuck on the previous release. **Fix:** added `--force` to the fetch invocation so a re-pointed tag on the remote overwrites the local stale copy cleanly; matches the in-app updater's contract ("sync me to the remote"). The native `update.sh` doesn't hit this bug because it fetches without `--tags` at all, but the in-app path can't drop `--tags` — release-tag refs (`v0.2.4b1`, `v0.2.4.1`, …) need to be locally resolvable for the subsequent `git reset --hard`. **Note for users on 0.2.4 upgrading to 0.2.4.1:** the fix is *in* 0.2.4.1, which 0.2.4's updater can't reach. Use the CLI path documented in the release notes for this one upgrade; from 0.2.4.1 onward the in-app button works again. Docker installs are unaffected — they don't go through git. Regression test in [`backend/tests/integration/test_updates_api.py`](backend/tests/integration/test_updates_api.py) asserts `--force` is in the fetch args alongside the existing `--tags` assertion so a future refactor can't quietly drop it.

- **Print Queue page no longer 404-storms thumbnail / plates / plate-thumbnail when an item points at a soft-deleted archive, and pending queue items for a soft-deleted archive are now cancelled with a clear reason instead of silently stuck-pending forever** ([#1348](https://github.com/maziggy/bambuddy/issues/1348) follow-up) — Symptom: opening the Queue page or any of its sub-views fired `GET /archives/{id}/thumbnail`, `GET /archives/{id}/plates`, and `GET /archives/{id}/plate-thumbnail/{n}` for queue rows pointing at archives that had been soft-deleted (#1343 leaves the row but removes files from disk), all returning 404. Frontend's `onError` handler hid the broken `<img>` so it was visually clean, but the network tab and any pending-print logic still saw three 404s per affected row. Two underlying problems wearing one mask: cosmetic 404 storm, AND functional — a queue item whose 3MF was removed from disk can never actually dispatch, so it sits in `pending` forever with no clue to the user about why. **Two-part fix in the same shape as the print-log followup above:** (1) New helper `_cancel_pending_queue_items(db, archive_id)` in [`backend/app/services/archive.py`](backend/app/services/archive.py) sets `status='cancelled'` + `waiting_reason='Source archive deleted'` on every pending queue item linked to the archive; called from `soft_delete_archive` alongside the existing `_null_print_log_thumbnail_paths` cleanup. Only `pending` is touched — `printing` is a rare race that the printer-side fail-path catches anyway, and completed / failed / cancelled rows are historical audit-trail. Hard-delete is already covered by `ON DELETE CASCADE` on `print_queue.archive_id`. (2) Queue API serializer in [`backend/app/api/routes/print_queue.py:224`](backend/app/api/routes/print_queue.py) now checks `item.archive.deleted_at` before populating any archive-derived field — when soft-deleted, the whole block (`archive_name`, `archive_thumbnail`, `print_time_seconds`, `filament_used_grams`, plate-specific re-reads, …) is skipped and the new `archive_deleted: bool = True` flag on [`PrintQueueItemResponse`](backend/app/schemas/print_queue.py) signals the soft-deleted state. The `archive_thumbnail` suppression alone covers the thumbnail render in [`QueuePage.tsx:434`](frontend/src/pages/QueuePage.tsx), [`CompactHistoryRow.tsx:45`](frontend/src/components/CompactHistoryRow.tsx), and [`QueueTimelineView.tsx:72`](frontend/src/components/QueueTimelineView.tsx) because they all gate on it. The `/plates` query at [`QueuePage.tsx:329`](frontend/src/pages/QueuePage.tsx) was gated on `archive_id` only — `archive_id` is the real FK and stays exposed in the response (the queue scheduler still needs it for audit / dispatch checks), so the query was added a new `&& !item.archive_deleted` clause to respect the new flag. **Regression tests** in [`backend/tests/integration/test_print_queue_api.py`](backend/tests/integration/test_print_queue_api.py): `test_soft_delete_archive_cancels_pending_queue_items` pins the cancel-only-pending behavior (completed rows untouched), `test_queue_api_hides_archive_surface_when_soft_deleted` pins the suppression + `archive_deleted=True` for soft-deleted archives, `test_queue_api_still_exposes_archive_surface_when_live` pins the sanity guard that live archives' fields keep flowing through. All 3 new tests + 146 in the queue/archives/obico sweep pass; ruff clean.

- **Print log no longer 404-storms on the thumbnail endpoint for entries whose archive was deleted or whose print failed before a thumbnail was extracted** ([#1348](https://github.com/maziggy/bambuddy/issues/1348) follow-up) — Symptom in DevTools when opening Archives → Print Log: a 404 per orphaned entry per render. Visually clean (the `<img onError>` handler in [`frontend/src/pages/ArchivesPage.tsx:3763`](frontend/src/pages/ArchivesPage.tsx) hides the broken image), but noisy and wasteful. **Root cause** in [`backend/app/api/routes/print_log.py:91-113`](backend/app/api/routes/print_log.py): `PrintLogEntry.thumbnail_path` is copied by value from `archive.thumbnail_path` at write-time ([`main.py:3615`](backend/app/main.py)) but the FK on `archive_id` is `ON DELETE SET NULL` (#1378) — so log entries survive archive deletion to preserve stats history, but the cached thumbnail_path string keeps pointing at a file that was removed when the archive's directory was deleted. Same shape for failed prints that recorded an expected thumbnail path before the extractor wrote (or skipped writing) the file. **Two-part fix:** (1) `get_print_log_thumbnail` self-heals when the file is missing — it NULLs `thumbnail_path` on the entry and commits before returning 404, so the frontend's `entry.thumbnail_path && <img>` gate keeps the next page render from re-requesting. (2) New helper `_null_print_log_thumbnail_paths(db, archive_id)` in [`backend/app/services/archive.py`](backend/app/services/archive.py) is called from `soft_delete_archive` and `delete_archive` before the on-disk files are removed — eager clear so future deletes don't cause the one-time storm at all. The route handler covers stragglers (failed prints, files manually moved, etc.). **Regression tests** in [`backend/tests/integration/test_archives_api.py`](backend/tests/integration/test_archives_api.py): `test_soft_delete_clears_thumbnail_path_on_linked_log_entries` pins the eager clear on the soft-delete route, `test_hard_delete_clears_thumbnail_path_before_fk_cascade` pins it on `ArchiveService.delete_archive` (used by the auto-purge sweeper), `test_print_log_thumbnail_route_lazy_nulls_missing_file` pins the route's self-heal for failed-print orphans where the file was never written. All 4 new tests + 61 in the archives/print-log sweep pass; ruff clean.

- **Camera stream no longer freezes every ~30 s when Obico fault detection is enabled on the same printer the user is viewing** ([#1348](https://github.com/maziggy/bambuddy/issues/1348), reported by @SL666) — Symptom on an X1-class printer running firmware that allows only one concurrent camera connection: opening the live camera worked initially, then the stream hung within seconds and "cancelled" — clicking the in-UI refresh restored it for another few seconds before it hung again, ad infinitum. Disabling Obico fault detection made the stream stable. **Root cause** in `_capture_frame` at [`backend/app/services/obico_detection.py:209-220`](backend/app/services/obico_detection.py): the buffer-reuse path that was supposed to make Obico polling free (#1271) only worked when `_last_frames[printer_id]` was populated. In every race window where `_active_streams` had a registered entry but the JPEG buffer was empty — stream startup before the first frame lands (1–3 s on RTSP), or any moment the upstream ffmpeg was mid-reconnect after a 30 s read timeout — `try_get_active_buffered_frame(printer_id)` returned `None` and the caller fell through to `capture_camera_frame_bytes(...)`, which spawned its own ffmpeg + TLS proxy and opened a competing RTSP socket on the printer. On firmwares that only allow one camera connection, that second socket forced the printer to drop the live fan-out connection — viewers' ffmpeg hit its 30 s read timeout, looped through 30 reconnect attempts at 0.2 s each (all racing the next Obico poll 10 s later), exhausted retries, and the broadcaster pump exited. The user's viewer disconnected with no obvious cause in the log because the Obico capture itself looked successful (`Successfully captured camera frame bytes: 83484 bytes`). **Fix:** the buffer-reuse gate was widened from "do we have a frame in the buffer?" to "is any fan-out stream registered for this printer?" — even when the buffer is momentarily empty. New helper `is_stream_active(printer_id) -> bool` at [`backend/app/api/routes/camera.py:82`](backend/app/api/routes/camera.py) checks `_active_streams` / `_active_chamber_streams` independently of buffer state. `_capture_frame` now consults `is_stream_active` first: if True, it returns the buffered frame when available or `None` (skip this poll cycle) when not — it **never** opens a competing socket while a viewer is attached, regardless of buffer state. The poll loop retries 10 s later, by which time the buffer is virtually guaranteed to be populated. The fresh-socket path still fires unchanged when no viewer is connected (Obico's primary use case: detection on idle/headless prints). Cost of the fix: at most one missed Obico detection cycle per viewer-attach (~10 s lag); benefit: zero competing-socket events while any viewer is connected. `try_get_active_buffered_frame` was refactored to delegate to `is_stream_active` so the two helpers stay in lockstep — its `/camera/snapshot` caller at [`camera.py:859`](backend/app/api/routes/camera.py) is unchanged behaviorally (snapshot is user-initiated single-shot; falling through to a fresh capture if buffer is momentarily empty is the desired behavior there). **Regression tests** in [`backend/tests/unit/test_obico_detection.py`](backend/tests/unit/test_obico_detection.py): new `test_skips_poll_when_stream_active_but_buffer_empty` reproduces the exact race (viewer registered, buffer empty) and pins that `_capture_frame` returns `None` and `capture_camera_frame_bytes` is NOT called; existing `test_returns_buffered_frame_when_stream_active` and `test_falls_back_to_fresh_capture_when_no_stream` were updated to patch the new `is_stream_active` helper alongside `try_get_active_buffered_frame`. All 31 obico tests + 113 in the wider camera/obico sweep pass; ruff clean.

- **Reprints (including failed and cancelled ones) no longer overwrite the source archive's statistics; Quick Stats now adds per-print events** ([#1378](https://github.com/maziggy/bambuddy/issues/1378), reported by @IndividualGhost1905) — Symptom: after reprinting a model from the Archive page, the reprint contributed nothing to Quick Stats / Statistics; worse, if the reprint failed at 10g while the original print used 100g, the archive card and the totals both flipped from 100g to 10g — losing the original print's data. **Root cause** in [`backend/app/main.py:1973`](backend/app/main.py) (`_handle_print_start`): every reprint shared the source archive's row via the `register_expected_print`/`expected_archive_id` path, and statistics (`GET /archives/stats` in [`backend/app/api/routes/archives.py`](backend/app/api/routes/archives.py), Prometheus `/metrics` in [`backend/app/api/routes/metrics.py`](backend/app/api/routes/metrics.py)) summed PrintArchive columns — so a single archive row was the only contribution per file regardless of how many times the user pressed Reprint. The cost overwrite at [`usage_tracker.py:633`](backend/app/services/usage_tracker.py) and energy overwrite at [`main.py:3625`](backend/app/main.py) compounded it: each run's actuals replaced the previous run's values on the source row. **Architectural fix** — statistics are now event-based, not file-based. The existing `PrintLogEntry` table (one row per print event, written at print completion; lives in [`backend/app/models/print_log.py`](backend/app/models/print_log.py) and already powered the cross-archive /print-log page) gains six columns: `archive_id` (nullable FK, `ON DELETE SET NULL` so log entries survive archive deletion — preserving the #1343 soft-delete-vs-stats decoupling), `cost`, `energy_kwh`, `energy_cost`, `failure_reason`, `created_by_id`. Idempotent SQLite + Postgres migrations in [`backend/app/core/database.py`](backend/app/core/database.py). `/archives/stats` and `/metrics` now sum/count from `PrintLogEntry` joined to `PrintArchive` for time-accuracy comparisons and user-scope filters. The `_run_reprint_archive` flow still keys to the source archive (so the archive list stays one-card-per-file rather than ballooning into one card per print), but every print completion writes a new `PrintLogEntry` row with the run's actual filament / time / cost / energy / status / failure_reason. The cost overwrite in `usage_tracker.py` now only fires on the first run (counts existing `PrintLogEntry` rows for the archive); the energy background task at `main.py:3625` similarly preserves the source archive's energy_kwh on reprints while backfilling the run's energy on the matching `PrintLogEntry` row (it runs after `write_log_entry`, so it fetches and updates the latest log row for the archive). **New UX surface** — archive list responses gain four aggregate fields (`run_count`, `last_run_at`, `total_filament_actual_grams`, `successful_run_count`, `failed_run_count`) computed via a single batch query (`_load_run_aggregates` in [`backend/app/api/routes/archives.py`](backend/app/api/routes/archives.py)); the archive card renders an orange "N prints" badge when `run_count > 1`, with a tooltip breaking down successful vs failed runs. New endpoint `GET /archives/{archive_id}/runs` returns every PrintLogEntry for the archive (newest first), powering a new Print Log section at the top of the Edit Archive modal — date / status / duration / filament / cost columns plus failure_reason text under failed runs (new component [`frontend/src/components/PrintLogTable.tsx`](frontend/src/components/PrintLogTable.tsx)). i18n keys added under `archives.card.runsBadge*` and `archives.runLog.*` (en/de/ja translated; other 5 locales fall back to English per project convention). **Soft-delete contract preserved** — the `purge_stats=true` hard-delete path now also `DELETE`s linked PrintLogEntry rows so the archive's contribution truly disappears from totals; soft-delete (the default) leaves the log entries intact so #1343 stats-preservation still works. **Partial-print accuracy** — failed / cancelled / stopped reprints would have over-counted in the new stats path if PrintLogEntry just recorded the source archive's slicer estimate (100g for a print that stopped at 10g). The write_log_entry call site now uses a partial-aware filament value via the new `_compute_run_filament_grams` helper at [`backend/app/main.py`](backend/app/main.py): completed prints record the estimate (since the print finished), and partial prints prefer sum of tracked spool deltas from `usage_results` if inventory was set up, falling back to `estimate × progress%` from the MQTT push, and finally to None if no signal exists. The per-run cost write uses the same precedence: prefer the usage_results sum (raw — without the topup-to-estimate inflation that `usage_tracker.update_archive_usage` applies for archive.cost, which assumes the print completed), and only fall back to archive.cost for completed prints. **Test fixture update** — the `archive_factory` conftest fixture now synthesizes one `PrintLogEntry` per completed test archive (since stats moved to that table, the previous "create archive only" pattern would silently produce 0-stat tests); pass `with_run=False` to skip for the "archived but never printed" case. 3 integration tests in [`backend/tests/unit/test_archive_run_aggregation.py`](backend/tests/unit/test_archive_run_aggregation.py) pin the reporter's exact scenario (100g completed + 10g failed reprint → stats show 110g total / 2 prints / 1 successful / 1 failed), the archive-list aggregates wiring, and the `/runs` endpoint ordering. 14 unit tests in [`backend/tests/unit/test_run_filament_helper.py`](backend/tests/unit/test_run_filament_helper.py) lock the partial-print math across completed / failed / cancelled / stopped statuses, both inventory-tracked and untracked paths, multi-filament sums, the >100% progress clamp, and the None-fallback cases. The full backend test suite — 4921 tests across unit + integration — passes; ruff clean; frontend build clean.

- **Matplotlib no longer logs `Permission denied: /app/.config` on every container start** — Matplotlib (imported lazily by the STL thumbnail generator in [`backend/app/services/stl_thumbnail.py`](backend/app/services/stl_thumbnail.py) when a user uploads an `.stl` file to the library) tries to create its font/style cache at `$HOME/.config/matplotlib` on first import. `HOME` is pinned to `/app` in the Dockerfile so containers with `pwd.getpwuid()` failures (PUID-mapped uids without a local passwd entry) still have a writable home — but `/app` itself is root-owned and not writable by the PUID:PGID the entrypoint drops to, so the first STL upload after a container start logged an `EPERM` warning and matplotlib fell back to a fresh `/tmp/matplotlib-*` dir. Functionally harmless (thumbnails still rendered) but it cluttered every support bundle and forced matplotlib to re-scan system fonts on every restart (~1-2 s per first-STL-upload). **Fix:** added `ENV MPLCONFIGDIR=/tmp/matplotlib` to the Dockerfile so matplotlib uses a guaranteed-writable cache dir up front. `/tmp` is writable by any uid so this works regardless of PUID, and the cache survives the container's lifetime so the font scan only pays its cost once per container.

- **BambuStudio now sees AMS / vt_tray / net info from a virtual printer without requiring a printer power-cycle** ([#1371](https://github.com/maziggy/bambuddy/issues/1371), reported by @Andlar94) — Symptom on a non-proxy VP (the user's A1 in `print_queue` mode): connecting BambuStudio to the VP showed no AMS / external spool info on the Device page; the only workaround was to power the printer off and back on while BambuStudio was open, after which the info populated for one window. **Root cause** in `MQTTBridge._on_printer_raw` at [`backend/app/services/virtual_printer/mqtt_bridge.py`](backend/app/services/virtual_printer/mqtt_bridge.py): the bridge's cache of the real printer's `push_status` was `self._latest_print_state = copy.deepcopy(print_data)` — a wholesale replacement on every incoming push. Bambu firmware sends two shapes of `push_status`: full pushall responses (on `pushall` request / printer reconnect) include AMS / vt_tray / net.info / lights_report, and ~1 Hz incremental updates with just the fields that changed (temperatures, fan speeds, wifi signal). The first incremental push after a pushall therefore wiped AMS info from the bridge cache, and BambuStudio (which reads the cache via the VP's own 1 Hz status push) saw a stripped-down state with no AMS visible until the next pushall — typically only on a manual printer power-cycle, which forces Bambuddy to reconnect and re-issue `pushall`. **Fix:** in the cache update path, preserve a small set of "slicer-visible sticky" top-level keys from the previous cache when the incoming push doesn't include them: `ams`, `vt_tray`, `ams_extruder_map`, `mapping`, `net`, `ipcam`, `lights_report`. Mirrors the same preservation pattern Bambuddy itself already uses for its own internal `state.raw_data` at [`bambu_mqtt.py:2686-2711`](backend/app/services/bambu_mqtt.py); without that, even Bambuddy's own UI would have shown blank AMS in the same way after an incremental push. The new sticky-key set adds three entries (`net`, `ipcam`, `lights_report`) that the slicer specifically cares about: BambuStudio reads `net.info[*].ip` for the FTP destination IP (which the bridge then rewrites to the VP bind IP), uses `ipcam.rtsp_url` for the camera mirror, and renders `lights_report` for the chamber-light toggle. Note: the fix only covers the typical "incremental push omits the sticky key" case — if a future firmware sends a *partial* AMS list (e.g. only one unit's tray subset), that incoming partial push would still replace the cached AMS. That's a rarer scenario and would need full Bambuddy-style per-unit deep-merge; deferred until anyone hits it. **Regression tests** in [`backend/tests/unit/test_vp_mqtt_bridge.py`](backend/tests/unit/test_vp_mqtt_bridge.py): new `test_incremental_push_preserves_ams_from_previous_cache` seeds the cache with a full pushall payload (AMS + vt_tray + lights_report), fires a temps-only incremental push, and pins that all three sticky fields survive with their original values; new `test_incoming_ams_update_replaces_cached_ams` pins the counterpart — when an incoming push DOES include `ams`, the cached value is replaced, so the preservation doesn't shadow real AMS state changes. All 29 mqtt_bridge tests + 158 in the wider virtual-printer sweep pass; ruff clean.

- **Queue items no longer get permanently stuck in `printing` status when the printer was in `FINISH` state at dispatch time, and direct-dispatch (Library → Print) no longer reports false success in the same scenario** ([#1370](https://github.com/maziggy/bambuddy/issues/1370), reported by @Martinnygaard) — Symptom: queue page shows `Busy: <printer>` even though the printer is connected, idle, and `awaiting_plate_clear=False`; no new prints will dispatch to it until the user manually deletes or reassigns the queue row. Reproducible by queueing (or directly dispatching) onto a printer that still has the un-dismissed "Print complete" prompt from a prior job. **Root cause** in `_watchdog_print_start` at [`backend/app/services/print_scheduler.py`](backend/app/services/print_scheduler.py) **and the parallel `_verify_print_response` at [`backend/app/services/background_dispatch.py`](backend/app/services/background_dispatch.py)**: the post-dispatch verifiers both treated *any* `gcode_state` transition away from `pre_state` as proof that the printer had accepted the `project_file` command. In the reporter's bundle, item 6 dispatched while printer 3 was in `FINISH` (residual from item 3 earlier that day) — firmware silently rejected the new `project_file` because the previous-print prompt was still up, and ~2 minutes later the user manually dismissed the screen prompt, putting the printer into `IDLE`. The watchdog saw `state != pre_state` and returned early as "command landed", but `FINISH → IDLE` is the user dismissing a prompt, **not** the printer accepting our project_file — so the queue row stayed at `'printing'` indefinitely and the scheduler's busy-printer seed (`SELECT printer_id FROM print_queue WHERE status='printing'` in [`print_scheduler.py:166-171`](backend/app/services/print_scheduler.py)) permanently marked printer 3 as busy. The same broad-transition bug existed in `_verify_print_response`, which would have caused direct-dispatch (Library → Print) onto a FINISH-state printer to report false success — silently failing to print while the UI showed the dispatch as complete. **Fix:** in both verifiers, narrow the "command landed" check to an allow-list of active-print states (`PREPARE` / `SLICING` / `RUNNING` / `PAUSE`) instead of "any state that isn't `pre_state`". Inactive states (`IDLE`, `FINISH`, `FAILED`) no longer short-circuit the early return. The `subtask_id`-advance signal stays as-is in both verifiers — it remains the definitive "command landed" path for H2D firmware that sits at `FINISH` for ~50 s after accepting `project_file` before transitioning to `PREPARE` (#1078 stays green in both). **Resilience hardening alongside the fix:** the watchdog's revert commit and `printer_manager._persist_awaiting_plate_clear` now run through `run_with_retry` ([`backend/app/core/database.py`](backend/app/core/database.py)), so SQLite single-writer `database is locked` contention can't silently drop the queue-row revert or the plate-clear gate flag. The revert path returns a tristate sentinel (`"reverted"` / `"already_moved_on"` / `"revert_failed"`) so the post-revert MQTT session-recovery logic only runs when we actually reverted (or the commit failed) — never when `on_print_complete` had already cleared the row, where a forced reconnect could break a healthy concurrent print on the same printer. (Most other queue/archive writes already went through `run_with_retry`; these two were the holdouts that surfaced as repeated `Failed to persist awaiting_plate_clear` warnings in the reporter's bundle.) **Manual recovery for users on 0.2.4** who already have stuck rows: stop Bambuddy, then `sqlite3 /app/data/bambuddy.db "UPDATE print_queue SET status='cancelled', completed_at=datetime('now') WHERE status='printing';"` and restart. **Regression tests** — new `test_reverts_on_finish_to_idle_user_dismissed_prompt` (queue) and `test_returns_false_on_finish_to_idle_user_dismissed_prompt` (direct-dispatch) reproduce the exact reporter scenario on both code paths; new `test_does_not_revert_on_pickup_via_active_state` (queue) and `test_returns_true_on_each_active_print_state` (direct-dispatch) iterate all four active-print states (PREPARE/SLICING/RUNNING/PAUSE) and pin that each one is correctly treated as a valid "command landed" signal. Existing `test_no_revert_if_item_already_completed` was also hardened — it now uses a real client mock and asserts `force_reconnect_stale_session.assert_not_called()`, so the tristate-sentinel guard around the recovery path is pinned (catches the regression I introduced and then fixed during the audit pass). The pre-existing `test_exits_on_state_change` (uses `RUNNING`) and `test_exits_on_subtask_id_change_even_if_state_still_finish` (the #1078 H2D path) both still pass without modification. All 29 watchdog tests across both files + 411 in the scheduler/queue/dispatch/printer-manager sweep + 3161 in the full backend unit suite + 302 in the targeted integration sweep all pass; ruff clean.

- **Spool removal from AMS no longer requires a manual Reconnect on X1C printers that report `power_on_flag=False` while idle** ([#1365](https://github.com/maziggy/bambuddy/issues/1365), reported by @an3k via @maziggy) — On an X1C running firmware 01.08.02.00, pulling a spool out of an AMS slot left the slot showing as full in Bambuddy until the user clicked "Reconnect"; even re-reading the (now empty) slot's RFID from the printer screen didn't propagate. **Root cause:** the empty-slot detection in [`_handle_ams_data`](backend/app/services/bambu_mqtt.py) at [`bambu_mqtt.py:1721`](backend/app/services/bambu_mqtt.py) gated on `if tray_exist_bits_str and power_on:` — meaning *any* MQTT message with `power_on_flag=False` was skipped wholesale. That guard was added in [`488f6631`](https://github.com/maziggy/bambuddy/commit/488f6631) to fix [#765](https://github.com/maziggy/bambuddy/issues/765), where a printer's final shutdown message (all-zero `tray_exist_bits` + `power_on_flag=False`) was wiping AMS slot data and triggering auto-unlink. But this user's X1C firmware emits `power_on_flag=False` between prints with `tray_exist_bits` still reflecting the real slot inventory — so every spool-removal update was silently discarded and only the manual Reconnect (which sends `pushall`, a full per-tray snapshot independent of the bitfield path) would correct the view. **Fix:** narrow the skip to the exact shutdown pattern — zero bits **AND** `power_on_flag=False`. Non-zero `tray_exist_bits` with `power_on_flag=False` is valid idle-AMS state and the update is now applied. The original #765 regression test (`test_shutdown_message_preserves_ams_data`) uses `tray_exist_bits='0'` and therefore still passes, so the shutdown protection is preserved exactly. **New regression test** `test_idle_printer_with_power_off_and_nonzero_bits_clears_removed_slot` in [`backend/tests/unit/services/test_bambu_mqtt.py`](backend/tests/unit/services/test_bambu_mqtt.py) pins the #1365 behavior: a removal update with non-zero bits and `power_on_flag=False` clears the affected slot, with other slots untouched. All 250 bambu_mqtt tests pass; ruff clean.

- **Discord notification provider now accepts legacy `discordapp.com` webhook URLs** ([#1363](https://github.com/maziggy/bambuddy/issues/1363), reported by @mrfoureyed) — Discord's "Copy Webhook URL" button emits `https://discordapp.com/api/webhooks/...` while Bambuddy's validation in [`backend/app/services/notification_service.py`](backend/app/services/notification_service.py) only accepted `https://discord.com/api/webhooks/...`, raising "Invalid Discord webhook URL" on paste. Both hostnames are operational on Discord's side and serve the same webhooks. The validation now accepts either prefix; the check itself is retained (vs. removing it as suggested) because it still catches the common paste-the-wrong-thing-into-the-Discord-field error. **Regression tests** in [`backend/tests/unit/services/test_notification_service.py`](backend/tests/unit/services/test_notification_service.py) — new `TestDiscordProvider` class pins both hostnames accepted, non-Discord hosts rejected, empty URL rejected.

- **Multi-color print archives reported near-zero cost (e.g. $0.01 for 110g) when only some AMS trays were mapped to inventory spools** ([#1344](https://github.com/maziggy/bambuddy/issues/1344), reported by @nicktags) — On an H2C running multi-color prints from Bambuddy with the global default filament cost set to $10/kg, the reporter's 110.3g archive showed $0.01 instead of ~$1.10. **Root cause:** `archive.cost` was set in two stages — first in [`backend/app/services/archive.py:1100-1114`](backend/app/services/archive.py) at archive creation (total grams × primary filament `cost_per_kg`, which produced the correct ~$1.10), then **overwritten** in [`backend/app/services/usage_tracker.py:618-621`](backend/app/services/usage_tracker.py) with `sum(r.cost for r in results)` where `results` only contains AMS trays mapped to a spool in Bambuddy's inventory. On a multi-color print where 3 of 4 used trays had no inventory spool, the sum only included the one tracked slot's tiny share, e.g. 1g × $10/kg = $0.01. The overwrite logic (#505, Feb 2026) was correct for fully-tracked single-color prints but silently corrupted multi-color archives when inventory was incomplete. The multi-color slicer feature that shipped in 0.2.4 ([`988c0055`](https://github.com/maziggy/bambuddy/commit/988c0055)) made this state common — many more users started running multi-filament prints from Bambuddy without first setting up inventory entries for every tray. **Fix:** the overwrite block in `usage_tracker.py` now charges any filament weight not covered by an inventory spool at the global default rate. New computation: `total_cost = sum(tracked_costs) + (archive.filament_used_grams - sum(tracked_weights)) × default_filament_cost / 1000`. Fully-tracked prints are unchanged (untracked grams = 0, top-up = 0). Partial-tracked prints get the missing slots' grams charged at the default rate, so the archive reflects the whole print. Same correction applied to the manual rescan path in [`backend/app/api/routes/archives.py`](backend/app/api/routes/archives.py) (`update_metadata` and `recalculate-costs` both now read `SUM(SpoolUsageHistory.weight_used)` alongside `SUM(cost)` and top up by the untracked delta). The pre-#1344 `archive.cost not overwritten with zero` regression test stays green — when `total_cost` after top-up is still 0 (no inventory match, no default rate set), the pre-existing catalog-based cost is preserved. **Regression tests** in [`backend/tests/unit/test_cost_tracking.py`](backend/tests/unit/test_cost_tracking.py): `test_archive_cost_includes_untracked_filament_at_default_rate` — 110g archive, only 10g tracked by inventory at $10/kg, default rate $10/kg → archive.cost = $1.10 (was $0.01 pre-fix; this is the exact reporter scenario). `test_archive_cost_fully_tracked_unchanged_by_topup` — when tracked weight ≥ archive grams, no top-up is applied and cost is unchanged from the pre-fix sum. All 14 cost-tracking tests + 182 in the wider usage-tracker / archives / cost-statistics suites pass; ruff clean.

- **Plate-detection calibration captured the wrong camera when an external camera was configured** ([#1359](https://github.com/maziggy/bambuddy/issues/1359), reported by @Andlar94) — On the reporter's A1 with an external RTSP / go2rtc camera enabled, every print start raised "Build plate not empty" no matter how perfectly they calibrated. **Root cause:** the runtime auto-check at print start in [`backend/app/main.py:1819`](backend/app/main.py) called `check_plate_empty(..., use_external=printer.external_camera_enabled, ...)` — honouring the external camera setting. The manual UI check + calibration routes in [`backend/app/api/routes/camera.py`](backend/app/api/routes/camera.py) declared `use_external: bool = False`, and the frontend client at [`frontend/src/api/client.ts`](frontend/src/api/client.ts) always sent `use_external=false` explicitly (the UI call sites in [`PrintersPage.tsx`](frontend/src/pages/PrintersPage.tsx) never passed `useExternal`). So calibration captured a frame from the **built-in** chamber camera and saved it as the reference; the runtime auto-check captured a frame from the **external** camera and diffed it against that built-in reference — a permanent difference well above any sane threshold, hence "not empty" on every print. **Fix:** the two routes now use `use_external: bool | None = None`, and after the printer row is loaded they derive the default as `bool(printer.external_camera_enabled and printer.external_camera_url and printer.external_camera_type)` — identical to the runtime path's logic and the service-layer gate at [`plate_detection.py:605`](backend/app/services/plate_detection.py). Centralising the default on the backend means any current or future caller automatically gets the right camera without having to remember the flag. The frontend client now only forwards `use_external` when the caller explicitly sets it (default omitted → backend decides), so the existing UI buttons immediately benefit. Power-user override path stays open: passing `?use_external=false` on a printer with an external camera still wins, so anyone who deliberately wants a built-in-camera reference can still get one. **Regression tests** in [`backend/tests/integration/test_camera_api.py`](backend/tests/integration/test_camera_api.py): `test_check_plate_defaults_use_external_when_external_camera_enabled` and `test_calibrate_plate_defaults_use_external_when_external_camera_enabled` pin the new default for a printer with external camera + URL + type set; `test_check_plate_defaults_use_external_false_when_external_camera_disabled` pins the built-in default for the no-external-camera case (the common path stays untouched); `test_calibrate_plate_explicit_use_external_false_overrides_default` pins the explicit-override escape hatch. All 11 plate-tagged camera integration tests pass; ruff clean; frontend build clean.

- **API Keys page now exposes a narrowly-scoped "Update electricity price" toggle so the Home Assistant dynamic-tariff integration actually works** ([#1356](https://github.com/maziggy/bambuddy/issues/1356), reported by @maziggy) — The reporter followed the [Energy Tracking wiki](https://wiki.bambuddy.cool/features/api-keys/) page literally — "create a key with **Write Settings** permission, then PATCH `/api/v1/settings` with `{energy_cost_per_kwh: ...}`" — and hit `{"detail":"API keys cannot be used for administrative operations"}`. Triage showed three independent drifts: (1) the wiki listed nine fictional permissions ("Read Printers / Write Settings / Admin / …") but the actual UI in [`SettingsPage.tsx:3683-3744`](frontend/src/pages/SettingsPage.tsx) only ever exposed **four** toggles (Read Status, Manage Queue, Control Printer, Allow Cloud Access). There was no Write Settings toggle to tick. (2) Even if the UI had exposed it, the backend hard-denies `Permission.SETTINGS_UPDATE` for every API key via `_APIKEY_DENIED_PERMISSIONS` in [`backend/app/core/auth.py`](backend/app/core/auth.py) — intentional protection because `PATCH /settings` can rewrite SMTP/LDAP/MQTT credentials and the HA access token, which would silently widen attack surface beyond what any documented use case needs. (3) So the wiki had been promising a workflow that was never deliverable. **Fix:** introduce a narrowly-scoped door for exactly the documented use case rather than relaxing the deny list. New column `can_update_energy_cost BOOLEAN DEFAULT FALSE` on `api_keys` ([`backend/app/models/api_key.py`](backend/app/models/api_key.py)) with idempotent migration in [`backend/app/core/database.py`](backend/app/core/database.py) — defaults FALSE so existing keys never silently gain settings-write capability on upgrade. New endpoint `POST /api/v1/settings/electricity-price` in [`backend/app/api/routes/settings.py`](backend/app/api/routes/settings.py) accepts `{"energy_cost_per_kwh": <float ≥ 0>}` — the field name matches what the wiki already documented so the HA `rest_command` example needs only a URL+method change, not a payload change. New custom dependency `require_energy_cost_update()` in [`backend/app/core/auth.py`](backend/app/core/auth.py) bypasses the `_APIKEY_DENIED_PERMISSIONS` check **for this one route** for API keys with `can_update_energy_cost=True`; JWT users still go through the standard `SETTINGS_UPDATE` permission check; auth-disabled deployments allow it (matches other settings routes). Crucially, the general `PATCH /settings` route remains denied for API keys — flipping the narrow flag does NOT widen general settings-write access (regression test pins this). Schema/route wiring in [`backend/app/schemas/api_key.py`](backend/app/schemas/api_key.py) + [`backend/app/api/routes/api_keys.py`](backend/app/api/routes/api_keys.py) accepts and returns the new field on create/update/list. **Frontend:** fifth toggle "Update electricity price" added to the create-API-key card in [`SettingsPage.tsx`](frontend/src/pages/SettingsPage.tsx) with an amber "Energy" badge on existing keys that have it set; `APIKey` / `APIKeyCreate` / `APIKeyUpdate` types in [`api/client.ts`](frontend/src/api/client.ts) gained the new field; 16 new i18n keys (`updateEnergyCost`, `updateEnergyCostDescription`, `energyCostBadge`) added to all 8 locales — full German translation, English fallbacks elsewhere per project convention. **Wiki rewrites:** [`features/api-keys.md`](https://wiki.bambuddy.cool/features/api-keys/) — replaced the fictional 9-row permissions table with the actual 5 toggles plus an info box explaining why no general Write Settings / Admin exists. [`features/energy.md`](https://wiki.bambuddy.cool/features/energy/) — Home Assistant section now points at `POST /api/v1/settings/electricity-price`, instructs users to tick the new permission, and adds a deprecation warning for users who built the integration from the old (broken) `PATCH /settings` example. **Tests:** [`backend/tests/integration/test_settings_electricity_price.py`](backend/tests/integration/test_settings_electricity_price.py) — 8 tests covering create-with-flag, default-off, API-key-with-flag updates persist, API-key-without-flag → 403, JWT admin user with SETTINGS_UPDATE allowed, anon → 401, negative price → 422 (Pydantic `ge=0`), and the critical regression test `test_patch_settings_still_denied_with_energy_flag` that pins the narrow-flag-doesn't-widen-PATCH contract. [`frontend/src/__tests__/pages/SettingsPage.test.tsx`](frontend/src/__tests__/pages/SettingsPage.test.tsx) — 2 new tests: Energy badge renders for keys with the flag, the toggle's value flows through to the POST body when the box is ticked. All 8 new backend tests + 32/32 SettingsPage tests pass; ruff clean; i18n parity passes; frontend build clean.

- **Layer timelapse now starts for queue/VP-dispatched prints** ([#1353](https://github.com/maziggy/bambuddy/issues/1353), reported by @Andlar94) — Reporter's external camera + go2rtc setup was configured correctly (Obico was happily polling the snapshot URL for ML plate detection) but no MP4 was ever produced. Logs showed `[LAYER-TL] Stitching layer timelapse for printer 1` after each print yet no frames were ever captured and no `[LAYER-TL] Attaching timelapse...` follow-up appeared. Root cause: `layer_timelapse.start_session()` was only called from the two **new-archive** paths in `on_print_start` (`backend/app/main.py:2510` fallback path and `2600` regular new-archive). The **expected-archive** branch at `main.py:1981-2052` — where every reprint and every queue/VP-dispatched print lands — updated the existing archive's status to `printing` but never started a timelapse session. So `_background_layer_timelapse` ran at print-complete time, called `tl_complete(printer_id)`, found no active session in `_active_sessions`, silently returned `None`, and the wrapper at `main.py:3917` produced no log message for the no-session case. Every print that came through the queue (or any reprint) silently lost its timelapse. **Fix:** mirror the same `if printer.external_camera_enabled and printer.external_camera_url: start_session(...)` call in the expected-archive branch right after `_active_prints` registration. The two pre-existing paths are untouched. **Help-text correction:** the snapshot URL field's tooltip previously read *"Single-frame URL used for notification thumbnails, finish photos, timelapse and plate detection"* — which is technically true but read as if filling in the URL was sufficient to enable those features. Reworded across all 8 locales to *"Timelapse and plate detection each require their own per-printer toggle — this URL is just the image source they pull from when active"* so admins know they still need to enable plate detection per-printer (separate toggle) and that timelapse only fires while a print is running. **Regression tests** in [`backend/tests/unit/test_layer_timelapse_expected_archive.py`](backend/tests/unit/test_layer_timelapse_expected_archive.py): `test_expected_archive_path_starts_timelapse_when_external_camera_enabled` exercises the full `on_print_start` flow with a registered expected print + `external_camera_enabled=True` and asserts `start_session` is called with the expected-print archive_id (not a freshly created one); `test_expected_archive_path_skips_timelapse_when_external_camera_disabled` keeps the existing gate in place so we don't try to capture from a None URL. 2 new tests pass; ruff clean; frontend i18n parity passes; bundle builds.
- **Assign Spool now configures the slot even after a "Reset Slot" on A1 Mini BMCU / P1S Standard AMS** ([#1322](https://github.com/maziggy/bambuddy/issues/1322) follow-up, reported by @RosdasHH) — The original fix widened empty-slot detection to `state == 11 OR tray_type != ""`, which closed the configured-slot reconfig case (PETG-over-PLA) but didn't help the "Reset Slot on printer screen with spool still inserted" flow: on these firmwares the AMS reports `state=3, tray_type=""` after a Reset Slot regardless of whether a spool is physically loaded. The empty-detection therefore decided "empty", skipped the MQTT publish, marked the assignment pending, and waited for `on_ams_change` to re-fire when the AMS transitioned to "loaded" — but the AMS never transitioned, because nothing was changing physically. A deadlock with no escape from user actions. Reporter pinned it by removing the `if not slot_is_empty:` gate at [`backend/app/api/routes/inventory.py:1302`](backend/app/api/routes/inventory.py) and verified the firmware accepts the MQTT push when a spool is present, even with `state=3, tray_type=""`. The original guard's rationale — "Bambu firmware silently drops ams_filament_setting / extrusion_cali_sel for unloaded slots" — turned out to be over-cautious: it's load-bearing only for slots that the *firmware itself* explicitly marks empty via `state == 9` ("no spool") or `state == 10` ("spool present but no feed"). For ambiguous states (`state=3` default-idle, missing-state on older firmwares), the AMS doesn't give us a reliable signal at all, so the safest bet is to treat the user's explicit Assign click as their assertion that a spool is there and let the firmware decide what to do with the push. **Fix:** the empty-detection now only short-circuits on `state ∈ {9, 10}` — every other state attempts MQTT. `pending_config` is now driven by either the explicit-empty signal OR `not configured` (so a printer-offline / no-client publish failure still flags the assignment as awaiting follow-up). The `on_ams_change` replay logic at [`backend/app/main.py:1031`](backend/app/main.py) is unchanged and still serves as the safety net for state=9/10 slots whose spools get inserted later (and for any truly-empty slot the firmware dropped — DB `fingerprint_type` stays empty until an AMS push actually provides one, so the replay still fires). **Trade-off:** for the rare case of "assign to a slot that really IS empty + state=3", the badge will show "Configured" even though firmware silently dropped the push. Most users assign right after inserting, so this is a small UI honesty cost in exchange for unblocking the much more common Reset-Slot workflow. **Follow-up optimization (also @RosdasHH):** the reporter then traced the raw MQTT payload and found that P1S / A1 Mini send only `{"id": N}` for a genuinely-empty slot — no `state`, no `tray_type`, no other fields. Without that signal, the assign path was firing one wasted MQTT publish per click on a truly-empty slot (firmware dropped it silently, but still). The AMS parser at [`backend/app/services/printer_manager.py:788`](backend/app/services/printer_manager.py) now detects the bare-tray shape (`len(tray) == 1 and "id" in tray and state is None`) and promotes it to `state=9` — the firmware's explicit "no spool" code — which lets the inventory route's existing `state ∈ {9, 10}` short-circuit apply. The detection is intentionally narrow: the post-Reset-Slot A1 Mini BMCU case sends a populated payload with empty values (state=3, tray_type=""), which has more than one key and stays unaffected — so the #1322 root fix is preserved. **Regression tests** in [`backend/tests/integration/test_inventory_assign.py`](backend/tests/integration/test_inventory_assign.py): `test_post_reset_slot_with_state_3_still_fires_mqtt` (renamed from the previous "marks_pending" test which was pinning the bug) and `test_state_missing_with_empty_tray_type_still_fires_mqtt` (inverted from the legacy "older firmware empty → pending" assertion) pin the new behavior on the two firmware shapes the reporter hit. `test_empty_tray_type_without_state_still_fires_mqtt` covers the no-state SpoolBuddy case. `test_no_ams_data_with_no_client_marks_pending` keeps the printer-offline path producing `pending_config=True` so on_ams_change replay still triggers. `test_state_empty_skips_mqtt_and_marks_pending` (state=9) is unchanged — the firmware's explicit "no spool" still short-circuits correctly. The recent [`dd3e3f80`](https://github.com/maziggy/bambuddy/commit/dd3e3f80) k-profile fix was a separate red-herring path the reporter happened to also hit during testing; it stays as-is. All 28 inventory-assign tests + 312 inventory-tagged tests pass; ruff clean. **Bare-tray follow-up tests:** `test_bare_tray_emulates_state_9` and `test_populated_payload_with_empty_state_3_is_not_promoted` in [`backend/tests/unit/services/test_printer_manager.py`](backend/tests/unit/services/test_printer_manager.py) — the second one is the explicit guard against regressing the #1322 root case by accident.

- **Firmware update dialog now survives Cloudflare-blocked or transient outages on `bambulab.com`** ([#1350](https://github.com/maziggy/bambuddy/issues/1350), reported by @K1ngJony) — User's X1C on 01.10.00.00 saw "01.11.02.00 newer · Unavailable" plus the error "Firmware file for 01.11.02.00 is not available from Bambu Lab", and the logs showed repeated `Failed to get Bambu Lab page: 403` warnings. Two problems stacked: (1) `https://bambulab.com/en/support/firmware-download/all` (the page Bambuddy scrapes to extract the Next.js `buildId` used to fetch per-model JSON with download URLs) was returning 403 from the reporter's network — Cloudflare bot protection on bambulab.com is stricter than on the wiki and, prior to the 2026-05-12 compliance audit, the firmware-check service still claimed to be Chrome 120 via UA spoofing. The UA was updated to honest `Bambuddy/1.0` in that audit but `Accept` / `Accept-Language` headers were never sent, so the request still tripped the "bare Python client" signal. (2) The `buildId` was cached in-memory only (1 h TTL), so every backend restart forced a fresh page fetch — meaning the first 403 from the user's network permanently broke download-URL resolution for that session even though the previous run had a perfectly valid buildId. **Fix in [`backend/app/services/firmware_check.py`](backend/app/services/firmware_check.py):** (a) the httpx client now sends `Accept: text/html,application/json,*/*;q=0.8` and `Accept-Language: en-US,en;q=0.9` alongside the existing honest `Bambuddy/1.0` UA — both headers any normal client sends, no impersonation. (b) `_get_build_id()` gained a disk-cache layer at `<data_dir>/firmware/build_id.json`: successful fetches persist `{build_id, fetched_at}` to disk; the in-memory cache (fresh path, 1 h TTL) is checked first, then the disk cache seeds the in-memory slot on cold start, then the live fetch tries to refresh. On 403 or network error, we keep the cached buildId and set a new `download_page_unreachable` flag so callers can render an honest error. (c) `_fetch_all_versions_from_download_page` now retries **once** when a cached buildId returns 404 (Bambu rebuilt the page → invalidate + refetch + retry); on 403 it sets the unreachable flag and gives up gracefully without churning. **Better error message in [`backend/app/services/firmware_update.py`](backend/app/services/firmware_update.py):** when a wiki-listed version has no download URL because `download_page_unreachable` is true, the dialog now says `"Could not reach Bambu Lab's firmware download page to fetch the file URL for X. Version is listed on the Bambu wiki but the download endpoint is unreachable from this network. Try again later, or download the firmware manually from bambulab.com and copy it to the printer's SD card."` instead of the misleading `"Firmware file for X is not available from Bambu Lab"` (which implied Bambu didn't have the file, when actually we just couldn't reach Bambu). Version genuinely not in the catalog still gets the original message. **Regression tests** in [`backend/tests/unit/test_firmware_versions.py`](backend/tests/unit/test_firmware_versions.py): `test_client_headers_identify_honestly_and_send_browser_accept` pins UA + Accept headers, `test_build_id_is_persisted_to_disk` confirms the disk write on success, `test_build_id_falls_back_to_disk_on_403` reproduces the reporter's 403 with a pre-seeded disk cache, `test_download_page_unreachable_flag_set_on_403_json` covers the per-model JSON endpoint 403 path, `test_download_page_retries_once_when_buildid_stale` proves the 404 retry. All 12 firmware tests + ruff clean.

- **Subtype dropdown on the Add/Edit Spool form now offers `CF` (carbon fiber) and `GF` (glass fiber)** ([#1345](https://github.com/maziggy/bambuddy/issues/1345), reported by @maziggy) — The Subtype dropdown in [`frontend/src/components/spool-form/FilamentSection.tsx`](frontend/src/components/spool-form/FilamentSection.tsx) is populated from the `KNOWN_VARIANTS` array in [`frontend/src/components/spool-form/constants.ts`](frontend/src/components/spool-form/constants.ts). `CF` and `GF` were missing, so a user adding a third-party PETG-CF spool via the Material=PETG + Subtype=CF flow (the same shape Bambu's "PETG HF" already used) couldn't find the subtype in the list and had to type it freehand into the "create new" tail. Added both — `CF` to match `PETG-CF` / `PLA-CF` / `ASA-CF` / `PA-CF`, and `GF` as the natural pair for `ABS-GF` / `PA6-GF`. `parsePresetName` in [`spool-form/utils.ts`](frontend/src/components/spool-form/utils.ts) is unaffected: its materials list is iterated longest-first, so a cloud preset like `Bambu PETG-CF Black` still resolves to material=`PETG-CF` with empty afterMaterial (the variant loop runs on `""` and finds nothing — no accidental Material=PETG / Subtype=CF rewrite). Frontend build clean.

- **Spool-assignment dialog stacks correctly: the material-mismatch confirmation appears above its parent, and dashboard filament hover popovers no longer get covered by sibling printer cards** ([#1336](https://github.com/maziggy/bambuddy/issues/1336) follow-up, mismatch case reported by @RosdasHH) — Two stacking-context regressions surfaced after the original z-50 → z-[100] bump on `AssignSpoolModal` landed. **(1) Material-mismatch ConfirmModal hidden behind its parent.** Assigning a spool with a different material to the one configured on the slot opens a yellow warning ConfirmModal from inside `AssignSpoolModal`. ConfirmModal's overlay was hardcoded to `z-50` in its wrapper at [`frontend/src/components/ConfirmModal.tsx`](frontend/src/components/ConfirmModal.tsx), so once the parent moved to `z-[100]` the child sat behind it — the user clicked Assign, saw the parent dim slightly, and nothing visible to confirm. Added an optional `overlayZIndex?: string` prop to `ConfirmModal` (defaults to `z-50` so all 82 other call sites are untouched), and the mismatch site at [`AssignSpoolModal.tsx:584`](frontend/src/components/AssignSpoolModal.tsx) passes `overlayZIndex="z-[110]"` so the warning sits above its parent. **(2) `FilamentHoverCard` / `EmptySlotHoverCard` covered by neighbouring printer cards.** Hovering an AMS slot on the dashboard opens a "Jade White · Bambu PETG HF · K Factor 0.024 · 87% · Open in Inventory / Configure" popover. The popover was using `position: absolute` with `z-[60]` inside its trigger — but each printer card on the dashboard creates its own stacking context (any `filter: drop-shadow` / `transform` / positioned-with-z descendant is enough), and `z-index` does not cross stacking-context boundaries: the next card in DOM order always wins regardless of how high the inner z-index goes. Visible as a "Jade White" tooltip getting half-eaten by the AMS-C tile column on the right neighbour card. Fixed by **portaling both hover cards to `document.body`** ([`FilamentHoverCard.tsx`](frontend/src/components/FilamentHoverCard.tsx) via `createPortal` from `react-dom`) with `position: fixed` and screen-space coordinates computed from `triggerRef.current.getBoundingClientRect()`. Coords are recomputed on visibility change, on `scroll` (capture phase) and on `resize` so the popover tracks the trigger when the viewport moves; a `requestAnimationFrame` re-measure after the initial paint avoids a one-frame flicker before the card has its rendered dimensions. Hover handlers wired on both the trigger AND the portaled card so moving the cursor from the slot tile onto the popover doesn't auto-dismiss it after 100 ms. The smart top/bottom placement logic (flips to below the trigger when there's not enough headroom above the fixed 56 px header) is preserved, as is the arrow pointer that points back at the slot. `z-[60]` stays — but it's now global because the popover lives at the root of the DOM, so it always beats dashboard widgets without conflicting with full-screen modals at `z-[100]`. All 20 `FilamentHoverCard`, 17 `ConfirmModal`, and 13 `AssignSpoolModal` tests pass; frontend build clean.

- **Deleting a print archive no longer wipes its filament / time / cost / energy contribution from Quick Stats** ([#1343](https://github.com/maziggy/bambuddy/issues/1343), reported by @IndividualGhost1905) — Running the same model ten times and then deleting nine of the resulting archive entries (to keep the file list tidy) silently rewound the totals on the Statistics page: `total_prints`, `total_filament_grams`, `total_cost`, and per-print energy all dropped back to whatever the surviving archive contributed, as if the other nine prints had never happened. Root cause: every metric in `get_archive_stats` at [`backend/app/api/routes/archives.py`](backend/app/api/routes/archives.py) is recomputed on each render via `COUNT` / `SUM` over the live `PrintArchive` rows, so removing a row removes its contribution. (Energy in the default "Total" mode already survived archive deletion because it reads the smart-plug lifetime counters via `_sum_live_plug_totals` — that's the architectural shape we now generalise to the rest of the metrics.) **Fix: soft delete with opt-in hard purge.** New nullable `deleted_at` column on `print_archives` ([`backend/app/models/archive.py`](backend/app/models/archive.py)) tracks rows the user removed from the UI. The DELETE endpoint at [`backend/app/api/routes/archives.py`](backend/app/api/routes/archives.py) now accepts `?purge_stats=true`; **default** behaviour is to soft-delete — files removed from disk (still frees the storage), row hidden from listings, but the row stays in the table so the stats endpoint keeps counting it. Setting `?purge_stats=true` falls back to the original hard-delete path for the rare case where the user actually wants the row out of Quick Stats too (e.g. failed prints that shouldn't pollute success-rate dashboards). The migration in [`backend/app/core/database.py`](backend/app/core/database.py) adds the column dialect-conditionally — `DATETIME` on SQLite, `TIMESTAMP` on PostgreSQL (PG doesn't accept `DATETIME` on `ALTER TABLE` the way it tolerates it inside `CREATE TABLE`) — plus an index on `deleted_at` so the `WHERE deleted_at IS NULL` filter that's now sprinkled across the listing queries stays cheap on big archive tables. **Service-layer changes.** `ArchiveService.soft_delete_archive` is a new sibling of `delete_archive` that reuses the existing on-disk path-safety checks (extracted into `_resolve_archive_dir_for_delete` so soft and hard delete share the resolution rules — refuses paths outside `archive_dir`, refuses depth-zero paths) and flips `deleted_at = now()` after `shutil.rmtree`. Listing methods now filter `PrintArchive.deleted_at.is_(None)`: `ArchiveService.list_archives`, `get_duplicate_hashes_and_names` (a soft-deleted dupe must not inflate a group's count so the UI shows "1 of 1" instead of "1 of 10"), `find_duplicates` (both the exact-hash and the print-name paths), and `ArchiveComparisonService.find_similar_archives` (both name-match and content-hash paths so the "Similar archives" panel doesn't suggest something the user just removed). The stats endpoint deliberately keeps NO filter — the whole point of #1343. Route-level reads tightened too: `GET /archives/{id}` returns 404 on soft-deleted rows so stale bookmarks don't expose hidden archives, search (both the SQLite FTS5 path and the LIKE fallback) skips them, the duplicate-group enrichment query in `list_archives` filters them, and tag listing / archives-by-tag exclude them. `GET /archives/slim` and `GET /archives/stats/export` intentionally do NOT filter so the dashboard widgets in `StatsPage.tsx` keep aggregating across the full history. **Frontend.** `ConfirmModal` gained an optional `children` slot (`frontend/src/components/ConfirmModal.tsx`) so the delete-confirmation dialog can render an opt-in checkbox between the message and the action buttons without forcing a new bespoke modal. [`frontend/src/pages/ArchivesPage.tsx`](frontend/src/pages/ArchivesPage.tsx) — both the card view and the detail view — now own a `deletePurgeStats` boolean per component instance and pass it through to `api.deleteArchive(id, purgeStats)` ([`frontend/src/api/client.ts`](frontend/src/api/client.ts) appends `?purge_stats=true` only when the box is ticked). The checkbox resets to off on every modal close so the destructive option is opt-in *per delete*, never sticky. **i18n:** one new key `archives.modal.deletePurgeStats` added across all 8 locales — full German translation, English fallbacks elsewhere per project convention. **Tests** added to [`backend/tests/integration/test_archives_api.py`](backend/tests/integration/test_archives_api.py): soft delete preserves the row's contribution to total prints / filament / cost (the regression test for the reporter's exact scenario), `?purge_stats=true` drops it from Quick Stats as before, soft-deleted archives 404 on `GET /archives/{id}`, soft-deleted archives are skipped by the search endpoint. All 42 pre-existing archive integration tests stay green, including `test_delete_archive` (which already asserts post-delete 404 — semantically equivalent under soft delete). Frontend `ConfirmModal` (17 tests) and `ArchivesPage` (23 tests) suites green, full build clean.

- **OIDC provider login icons now render again — the strict SPA CSP no longer breaks them** ([#1333](https://github.com/maziggy/bambuddy/issues/1333), [PR #1342](https://github.com/maziggy/bambuddy/pull/1342) by @netscout2001) — When an admin configured an OIDC provider with an external `icon_url` (e.g. `https://google.com/icon.png`), the login page showed the browser's broken-image glyph instead of the IdP logo. Root cause: the SPA ships with the strict policy `img-src 'self' data: blob:` so the entire admin UI cannot hot-link arbitrary external image hosts; admin-supplied icon URLs hit that wall on every render. Two options were on the table — loosen `img-src` to allow `https:` (one-line change but degrades the SPA's CSP everywhere), or proxy the bytes through the backend (this PR). The proxy path was chosen because (a) the SPA's `img-src` policy stays strict app-wide; (b) the existing MakerWorld thumbnail endpoint at [`backend/app/services/makerworld.py`](backend/app/services/makerworld.py) already established the pattern with the same rationale; (c) anonymous login-page renders no longer leak each visitor's IP to the IdP host as a tracking signal — the proxy fetches the bytes once at admin-configure time and serves them from the same origin afterwards. **Backend.** New `MakerWorld-style` fetcher in [`backend/app/services/oidc_icon.py`](backend/app/services/oidc_icon.py) streams the response with `follow_redirects=False` (so the SSRF host allowlist can't be bypassed via a 302 to a private address), enforces a MIME whitelist (PNG/JPEG/WebP/GIF; SVG is intentionally omitted — XML payloads carry too many `xlink:href` / external-ref corner cases for an MVP), and aborts at the **first chunk past 1 MB** so a hostile or misconfigured IdP serving a 500 MB payload cannot OOM the server. SSRF guard `assert_safe_public_https_url` in [`backend/app/api/routes/_oidc_helpers.py`](backend/app/api/routes/_oidc_helpers.py) is **stricter** than the Spoolman variant — Spoolman deliberately allows loopback / RFC-1918 (same-LAN deployment is the standard topology) while OIDC icons must live on the public internet, so private addresses there are SSRF probes. The shared SSRF data (cloud-metadata IP set covering AWS/GCP/Azure/Oracle/DO/Alibaba, numeric-encoded-IP regex, IPv4-mapped-IPv6 unwrap) was extracted to [`backend/app/api/routes/_url_safety.py`](backend/app/api/routes/_url_safety.py) so the two top-level guards share *data* but keep their distinct *policies*. The Pydantic `_validate_icon_url` in [`backend/app/schemas/auth.py`](backend/app/schemas/auth.py) now lazy-imports the runtime SSRF guard so schema validation and the fetcher enforce the same allowlist — no drift between layers. **Storage.** Three new columns on `oidc_providers` ([`backend/app/models/oidc_provider.py`](backend/app/models/oidc_provider.py)): `icon_data` (`LargeBinary`, `deferred=True` so list queries don't pull the BLOB on every login-page render), `icon_content_type` (`String(20)`, also serves as the has-icon indicator so the check never accidentally lazy-loads the BLOB), `icon_etag` (SHA-256 hex). A DB-layer `CheckConstraint` enforces the all-or-nothing triplet (`(icon_data IS NULL) = (icon_content_type IS NULL) = (icon_etag IS NULL)`) — fresh installs (SQLite + PostgreSQL) get it via `metadata.create_all`, stale PostgreSQL installs get it via `ALTER TABLE ADD CONSTRAINT` in [`backend/app/core/database.py`](backend/app/core/database.py) (SQLite cannot `ADD CONSTRAINT` on an existing table, same trade-off as the existing `default_group_id` FK). The migration's `ALTER TABLE` is dialect-conditional — `BLOB` on SQLite, `BYTEA` on PostgreSQL. **Routes.** Four endpoints in [`backend/app/api/routes/mfa.py`](backend/app/api/routes/mfa.py): `GET /oidc/providers/{id}/icon` is **public** (no auth, same rationale as `/api/v1/makerworld/thumbnail` — `<img>` tags can't send Authorization headers, and the icon renders before the user is signed in), serves cached bytes with a strong `ETag` and `Cache-Control: public, max-age=3600`, supports `If-None-Match` including the `W/` weak prefix, the `*` wildcard, and multi-token comma lists per RFC 7232. `DELETE /oidc/providers/{id}/icon` clears **all four** icon columns (URL + the three cached-bytes columns) — "Remove icon" means the whole record is gone, not just the cache, so the admin form doesn't end up in a confusing half-state where it shows a stale URL while the login page renders the Shield fallback. `POST /oidc/providers/{id}/icon/refresh` re-fetches from the stored URL for the "Refresh" button. Disabled providers respond 404 on the GET endpoint to avoid leaking their existence to anonymous callers. `POST` / `PUT` integrate the fetcher **transactionally**: a failed fetch aborts with 400 before commit, so a bad URL on create leaves no half-configured row in the DB and a bad URL on update leaves the previous cached bytes intact. PUT with explicit `icon_url: null` clears the icon record (detected via Pydantic's `model_fields_set` — distinct from "field omitted" which preserves it). Both fetch failures and SSRF rejections log at WARNING with the URL **redacted** (query string and fragment stripped via `_redact_url_for_log`) so admin-supplied presigned URLs carrying `X-Amz-Signature=...` or bearer tokens can't end up in operator log files. **Frontend.** [`frontend/src/pages/LoginPage.tsx`](frontend/src/pages/LoginPage.tsx) extracts an `OIDCProviderButton` sub-component so each provider owns its own `iconFailed` state — on `<img>` error (provider deleted between page load and image fetch, network blip, etc.) the SPA swaps in the `Shield` fallback rather than showing the broken-image glyph to anonymous users. [`frontend/src/components/OIDCProviderSettings.tsx`](frontend/src/components/OIDCProviderSettings.tsx) does the same with `ProviderIconAvatar` (Globe fallback) and adds Refresh / Remove buttons. The new same-origin proxy URL helper `api.oidcProviderIconUrl(id)` returns a `SameOriginUrl`-branded string so a future caller can't accidentally substitute an attacker-controlled URL where this is consumed. Four new i18n keys (`refreshIcon`, `removeIcon`, `iconRefreshed`, `iconRemoved`, `iconFetchFailed`) added across all 8 locales. **Tests.** About 100 new tests covering the streaming fetcher (MIME whitelist, status codes, redirect rejection, size-cap early-exit including the **first-oversized-chunk** guarantee, missing Content-Type distinct message, `httpx.InvalidURL` mapping), the OIDC SSRF guard (explicitly asserts that Spoolman-allowed cases like loopback / RFC-1918 / `localhost` are **rejected** here so the two guards do not silently converge), Pydantic-validator parity (numeric-encoded IPs, cloud metadata, multicast, IPv4-mapped IPv6 all rejected at schema-validate time), the dialect-conditional `ALTER TABLE` migration (both BLOB and BYTEA paths via patched `is_sqlite()`), the full create/update/delete/refresh flow including atomicity (failed fetch preserves prior state), the upgrade-path edge case (`icon_url` present but no cached bytes → refetch on next save), ETag/304 with `W/` weak prefix and `*` wildcard, raw-SQL inconsistent-triplet 404 defence, the PG→SQLite-ZIP backup BLOB type-mapping round-trip, and a **CSP regression-guard test** in [`backend/tests/integration/test_security_headers.py`](backend/tests/integration/test_security_headers.py) that asserts the SPA default CSP block does **not** include `https:` in `img-src` — so a future contributor "fixing" a broken icon by relaxing CSP discovers the proxy pattern instead. Frontend tests in [`LoginPage.test.tsx`](frontend/src/__tests__/pages/LoginPage.test.tsx) and [`OIDCProviderSettings.test.tsx`](frontend/src/__tests__/components/OIDCProviderSettings.test.tsx) cover `has_icon: true|false`, mixed providers on the same page, `<img>` error → Shield/Globe fallback, and **per-provider state isolation** (two `has_icon: true` providers; firing `error` on A leaves B's icon intact — locks in the sub-component extraction so a future hoist of `useState` to the parent loop is caught by CI). Manually verified end-to-end against a live PocketID instance with multiple icon URLs. **Follow-on tightening:** `has_icon` is now a required field on `OIDCProviderResponse` (no Pydantic default — fails loudly if any future caller skips `_build_provider_response`), backed by an `OIDCProvider.has_icon` `@property` reading `icon_content_type`. In `update_oidc_provider` the icon refetch was moved BEFORE the setattr loop, so on fetch failure the in-memory ORM object stays consistent (DB row was already safe via `get_db()`'s rollback; this closes the in-memory window too). **Patched by @netscout2001.**

- **Backup tab indicator dot now turns green when Scheduled (local) Backups is enabled** ([#1331](https://github.com/maziggy/bambuddy/issues/1331), [PR #1338](https://github.com/maziggy/bambuddy/pull/1338) by @chanakyan-arivumani) — Toggling **Scheduled Backups** on inside Settings → Backup left the sidebar tab indicator dot stuck on grey: the visual cue that there's an active backup configuration was lost for users who run scheduled local backups without GitHub. Two stacked layers caused it: (1) the dot condition at [`SettingsPage.tsx:1461`](frontend/src/pages/SettingsPage.tsx) only checked the GitHub chain (`cloudAuthStatus?.is_authenticated && githubBackupStatus?.configured && githubBackupStatus?.enabled`); `settings?.local_backup_enabled` was never consulted, so the scheduled-backup state had no path to the indicator. (2) The toggle handler in [`GitHubBackupSettings.tsx`](frontend/src/components/GitHubBackupSettings.tsx) called `api.updateSettings({ local_backup_enabled })` but never invalidated the `['settings']` query cache, so `SettingsPage` kept reading the stale value — the indicator would only update on a full page reload even if the condition fix were in place. Two-line fix: extend the dot's predicate to `... || settings?.local_backup_enabled` and add `queryClient.invalidateQueries({ queryKey: ['settings'] })` after a successful save (matching the existing invalidation pattern at `GitHubBackupSettings.tsx:402/463/477/497`). The GitHub-chain short-circuits first so the common case is unchanged. **Patched by @chanakyan-arivumani.**

- **Color catalog presets now apply `extra_colors` (gradient stops) and `effect_type` (sparkle / wood / marble / glow / matte) onto the spool, not just hex + name** ([#1340](https://github.com/maziggy/bambuddy/issues/1340), reported by @maugsburger) — Creating a catalog entry that pairs a base color with multi-color gradient stops and a visual effect, then clicking that swatch in the Edit Spool dialog, only copied `color_name` and `rgba` over — the `extra_colors` and `effect_type` fields were silently dropped. The data was flowing from the backend correctly (`GET /api/v1/inventory/color-catalog` returns both fields per the `ColorCatalogEntry` schema in [`frontend/src/api/client.ts`](frontend/src/api/client.ts)), but three layers above stripped them: (1) [`SpoolFormModal.tsx`](frontend/src/components/SpoolFormModal.tsx) typed its `colorCatalog` state with a narrower shape that omitted the two fields; (2) [`ColorSection.tsx`](frontend/src/components/spool-form/ColorSection.tsx) mapped catalog entries to `CatalogDisplayColor` (the typed-down shape rendered on swatches) without propagating them; (3) the `selectColor()` handler only set `rgba` + `color_name` on click. **Fix:** widened both types in [`spool-form/types.ts`](frontend/src/components/spool-form/types.ts) (`CatalogDisplayColor` + `ColorSectionProps.catalogColors`) to carry the optional `extra_colors` and `effect_type`, propagated them through the four `matchedCatalogColors` mapping callbacks (byBrand / exact full-material / normalized-trailing-`+` / base-material prefix), and extended `selectColor` to take optional `extraColors` / `effectType` parameters. **Semantic rule:** catalog swatches are complete presets — picking one writes BOTH gradient and effect from the entry (overwriting any existing values), so a gradient catalog entry applies its stops AND a solid catalog entry clears any old gradient that was on the spool. Recent-colors and the hardcoded-fallback palette are plain hex pickers — picking one keeps any existing `extra_colors` / `effect_type` untouched, since those swatches aren't presets, just color picks. **Bonus:** fixed the en-US spelling drift the reporter flagged in their nitpick — `'Extra colours'` and `'wrong colour loaded'` strings (which had been seeded into all 8 locale files as English fallbacks) standardized to `'Extra colors'` and `'wrong color loaded'`; matching comment blocks (`// Multi-colour ...`) normalized in the same pass. **Regression tests** in [`__tests__/components/spool-form/ColorSectionCatalogExtras.test.tsx`](frontend/src/__tests__/components/spool-form/ColorSectionCatalogExtras.test.tsx) (3 cases): catalog click with gradient + effect propagates all four fields to `updateField`, catalog click on a solid preset clears any pre-existing extras/effect (preset-replaces-look semantic), and fallback palette click leaves extras/effect untouched. All 23 spool-form tests + 8 i18n parity tests pass; build clean.

- **Assigning a spool to an unconfigured AMS slot no longer silently skips MQTT on A1 Mini / P1S firmware — and the "PETG over a PLA-configured slot won't reconfigure" symptom is fixed in the same change** ([#1322](https://github.com/maziggy/bambuddy/issues/1322), reported by @RosdasHH) — On the user's A1 Mini BMCU (firmware 01.07.02.00) and P1S Standard AMS (firmware 00.00.06.75), pressing "Assign Spool" on any slot left the slot unconfigured: the DB row was created with `pending_config=True`, the MQTT publish was skipped, and the log line `Pre-configured assignment: ... (slot empty, will configure on insert)` fired even though the spool was physically loaded. The same code path also blocked the "swap PLA to PETG in the same slot" flow — Bambuddy would keep treating the spool as PLA because the publish never reached the printer. **Root cause:** the empty-slot detection at [`backend/app/api/routes/inventory.py:1267`](backend/app/api/routes/inventory.py) preferred `tray.state == 11` ("filament fed to extruder") over `tray_type`, falling back to `tray_type` only when `state` was missing entirely. Reporter's AMS dumps showed `state == 3` on every slot — configured and unconfigured, on both printers — and `state` was never absent. So the state-only branch always fired, the result was always "empty", and MQTT was always skipped regardless of whether the slot was actually loaded. The "fingerprint_type empty → defer until insert" pre-config replay at [`backend/app/main.py:1026`](backend/app/main.py) had the same `cur_state == 11` gate, so even when the user manually configured the slot in Bambu Studio afterward (making `tray_type` go from `""` to `"PLA"`), the deferred MQTT publish never fired because state stayed at 3. **Fix:** both call sites now use a disjunction — the slot is treated as loaded when **either** `state == 11` **or** `tray_type` is non-empty. The "Reset slot" case (state=11 + tray_type="") that the original state-only check was protecting still works through the first clause; the configured-slot case (state=3 + tray_type="PLA") on firmwares that never set state=11 now works through the second; and truly empty unconfigured slots (state≠11 + tray_type="") still fall through to the pending-config path correctly. The on_ams_change replay's disjunction also fires the deferred publish when the user later configures the slot through Bambu Studio, since that flips `tray_type` non-empty even if state stays at 3. **Caveat:** for a truly empty slot with a 3rd-party non-RFID spool that the user physically inserted, neither signal points to "loaded" on these firmwares, so we still can't auto-fire the publish until the slot gets configured (manually or by another assign). The pending-config row persists in the DB and gets applied on the next AMS push that flips `tray_type` non-empty. **Regression tests:** 3 in [`test_inventory_assign.py`](backend/tests/integration/test_inventory_assign.py) — `test_state_never_eleven_firmware_with_loaded_tray_fires_mqtt` (state=3 + tray_type='PLA' → MQTT fires; pins the reporter's primary symptom and the PETG-over-PLA secondary symptom which goes through the same predicate), `test_state_never_eleven_firmware_with_empty_tray_marks_pending` (state=3 + tray_type='' still pending — confirms the disjunction didn't accidentally turn truly empty slots into the loaded branch), and `test_on_ams_change_fires_replay_when_tray_type_appears_without_state_11` (pre-existing SpoolBuddy-style assignment with empty fingerprint; tray_type going `''→'PLA'` on a state=3 firmware fires the deferred publish even though state never becomes 11). All 28 tests in the file pass; ruff clean.

- **Assign Spool / Inventory search: numeric spool ID lookup is back, and Unassign in Spoolman mode no longer stays permanently disabled** ([#1336](https://github.com/maziggy/bambuddy/issues/1336), reported by @S0liter) — Two independent regressions surfaced from the same report. **(1) Numeric ID search:** typing a Spoolman spool's numeric ID into the search box on the "Assign Spool" dialog (or on the Inventory page) returned no results. The shared search helper `spoolMatchesQuery` at [`frontend/src/utils/inventorySearch.ts:7`](frontend/src/utils/inventorySearch.ts) only checked the text fields (`material`, `brand`, `color_name`, `subtype`, `note`, `slicer_filament_name`, `storage_location`) — the spool's `id` was not part of the predicate, so a query like `12` only matched when "12" happened to be a substring of one of the text fields. One-line fix: the predicate now also tests `String(spool.id).includes(q)`, mirroring the case-insensitive substring semantics of the other fields. Covers both call sites: the Assign Spool dialog ([`AssignSpoolModal.tsx:255`](frontend/src/components/AssignSpoolModal.tsx) for local inventory + `:446` for Spoolman) and the main Inventory page ([`InventoryPage.tsx:871`](frontend/src/pages/InventoryPage.tsx)). New regression test in [`__tests__/utils/inventorySearch.test.ts`](frontend/src/__tests__/utils/inventorySearch.test.ts) pins exact-match (`'42'` → id 42), substring (`'4'` → id 42), and non-match (`'99'` → id 42 rejected) so the predicate can't drift back into "text only" silently. **(2) Unassign button stuck disabled in Spoolman mode:** opening the edit modal on a Spoolman spool that was assigned to an AMS slot left the Unassign button greyed out — the user had no way to release the spool back to "available". The modal at [`SpoolFormModal.tsx:526`](frontend/src/components/SpoolFormModal.tsx) only ever queried `api.getAssignments()` (the legacy local `spool_assignments` table) and looked up by `a.spool_id === spool.id`. In Spoolman mode the slot assignment lives in the separate `spoolman_slot_assignments` table, keyed by `spoolman_spool_id` — so the lookup always returned `undefined`, the button's `disabled={isPending || !spoolAssignment}` predicate stayed true forever, and `unassignMutation` was also pointing at the wrong API (`unassignSpool` instead of `unassignSpoolmanSlot`). Both the query and the mutation now branch on the existing `spoolmanMode` prop: Spoolman mode uses `getSpoolmanSlotAssignments()` + lookup by `spoolman_spool_id` + `unassignSpoolmanSlot(spool.id)` and invalidates the `spoolman-slot-assignments-all` / `spoolman-slot-assignments` query keys; local mode keeps the existing path unchanged. Two new regression tests in [`__tests__/components/SpoolFormModal.test.tsx`](frontend/src/__tests__/components/SpoolFormModal.test.tsx) (`SpoolFormModal — Unassign button (#1336)`): the button is enabled and clicking it calls `unassignSpoolmanSlot(42)` when a matching `spoolman_slot_assignment` exists, and the button stays disabled (no `unassignSpool` fallback) when no assignment exists. All 12 search-helper tests + 13 InventoryPage search tests + 27 SpoolFormModal tests pass; frontend build clean.

- **Spoolman auto-create no longer labels Bambu Lab RFID spools with competitor names like "3DXTECH™ Black"** ([#1309](https://github.com/maziggy/bambuddy/issues/1309), [PR #1330](https://github.com/maziggy/bambuddy/pull/1330) by @ojimpo) — When Bambuddy auto-created a Spoolman filament entry for a Bambu Lab RFID spool, the second-stage lookup against Spoolman's external library (`GET /api/v1/external/filament`, served from [SpoolmanDB](https://donkie.github.io/SpoolmanDB/filaments.json)) matched on `material + color_hex` only — there was no `manufacturer` / `vendor` filter. **The catalog is multi-vendor and roughly ID-sorted**: for PLA + `#000000` (black) it contains 64 entries, with the first hit being `3djake_pla_black_1000_175_n` (`3DJAKE`), the third being `3dxtech_pla_carbonxcarbonfiberblack_500_175_p` (`3DXTECH`, name `CarbonX™ Carbon Fiber Black`), and the actual `bambulab_pla_black_1000_175_n` not surfacing until position 15. Bambuddy therefore created the filament under the Bambu Lab vendor but labeled it with a competitor's product name. Real-world observations in production: Bambu Lab ABS Black created as `3DXTECH™ Black`, Bambu Lab PLA Support picked the adjacent / wrong variant instead of `bambulab_pla_supportforpla/petgblack_500_175_n`, and PLA Basic Black created as `PLA` (material, not `PLA Basic`). A **secondary issue compounded this**: `_create_filament_from_external` dropped the external entry's `density` field, so even when the correct entry was eventually picked the density got overwritten by `create_filament`'s built-in PLA-default 1.24 fallback instead of the catalog's actual value (1.26 for PLA Basic, 1.31 for PETG, etc.). **Fix** in [`backend/app/services/spoolman.py::_find_or_create_filament`](backend/app/services/spoolman.py): (1) the external-library loop now filters by `manufacturer == "Bambu Lab"` (case-insensitive, whitespace-trimmed), with a defensive `id.startswith("bambulab_")` fallback that handles entries where the `manufacturer` field is missing or has drifted in a future SpoolmanDB schema. (2) When multiple Bambu Lab candidates match the same `material + color_hex`, the function prefers the entry whose `name` equals the AMS `tray_sub_brands` (lowercase+strip comparison) so the more specific variant wins — `PLA Basic` over generic `Black`, `Support for PLA/PETG Black` over generic `Black`, etc. (3) `_create_filament_from_external` now propagates `external.get("density")` through to `create_filament`; when the catalog entry has no density set, the existing material-table fallback inside `create_filament` still kicks in via the `if density is None` branch at line 321 — no path lost. **Behavioural caveat the user needs to know**: previously-created mis-named filaments are NOT auto-renamed by this fix. Step 1 of `_find_or_create_filament` is the internal-Spoolman-filament loop that short-circuits on `(vendor == "Bambu Lab", material, color_hex)` — and that path is unchanged. Any Bambu Lab filament created by an older Bambuddy build (or hand-edited by the user) will continue to be matched and reused on subsequent AMS reads, regardless of how wrong its name is. To pick up the corrected name, the user has to **delete the mis-named filament in Spoolman once** — then the next AMS read for the same material+color falls through to the external-library step and creates a new entry with the correct Bambu Lab name. This is deliberate: some users may have intentionally renamed Bambu Lab filaments (e.g. to follow their own naming convention or to merge variants) and a silent auto-rename would undo that. **Regression tests** in [`test_spoolman_service.py::TestFindOrCreateFilament`](backend/tests/unit/services/test_spoolman_service.py) (6 new): internal short-circuit preserves the existing match without touching the external library, non-Bambu-Lab external entries are skipped even when they sort first in SpoolmanDB, `PLA Basic` wins over generic `Black` via the `tray_sub_brands` tiebreaker (per maintainer request on #1309), no-match-anywhere falls back to `tray_sub_brands or tray_type` instead of leaking a competitor name into the create call, `id.startswith("bambulab_")` accepts entries with absent `manufacturer` field, and density propagates end-to-end through the public method instead of getting clobbered by the material-default. All 44 tests in `test_spoolman_service.py` pass; ruff clean. **Reported and patched by @ojimpo.**

- **Safety: bed-jog Z direction was inverted on A1 / A1 Mini — "Up" rammed the nozzle into the bed** ([#1334](https://github.com/maziggy/bambuddy/issues/1334), reported by william.filipcic@gmail.com) — On A1 / A1 Mini, clicking the "Up" arrow on the printer-card bed-jog control would send the nozzle straight into the build plate. Reporter triggered it with the 50 mm step and crashed their nozzle. **Root cause:** the bed-jog UI was designed against the X1 / P1 / H2 family's bed-on-Z convention. On those printers the bed is the Z-axis, Bambu's firmware homes Z=0 at the top, and ``G1 Z-`` raises the bed toward the toolhead (decreases the nozzle-bed gap). The frontend maps "Up" to negative distance with that convention in mind. **A1 / A1 Mini are bed-slingers**: the bed moves on Y, the toolhead moves on X+Z, and the firmware uses standard cartesian Z (Z+ = toolhead up). On those models ``G1 Z-10`` drives the *toolhead* down 10 mm — straight through any clearance the user had — which is exactly what the reporter saw. There was no model classification at the bed-jog code path; every printer got the same X1-convention G-code. **Fix:** new ``is_bed_slinger(model)`` helper at [`backend/app/services/printer_manager.py`](backend/app/services/printer_manager.py) (sibling to existing ``supports_chamber_temp`` / ``has_stg_cur_idle_bug``, reuses the already-defined ``A1_MODELS`` frozenset which covers display names and internal codes ``N1`` / ``N2S``). The bed-jog route at [`backend/app/api/routes/printers.py:2710`](backend/app/api/routes/printers.py) now inverts the signed distance before emitting the G-code when the printer model is in that set, so the UI "Up" semantics ("decrease nozzle-bed gap") stay consistent regardless of which physical part moves on the printer. Frontend stays untouched — single source of truth for the direction logic lives in the backend, keyed off the printer's ``model`` column, so any future bed-slinger Bambu model only needs one frozenset update. The route's ``Query`` description and docstring now state the new contract explicitly: distance is the *gap adjustment*, not the raw Z value, and the backend translates per model. **Regression tests:** 13 in [`test_bed_jog.py::TestBedJogAPI`](backend/tests/unit/test_bed_jog.py) — 6 parametrised cases prove bed-on-Z models (X1C / P1S / H2D / H2S / H2C / P2S) still emit ``G1 Z-10.00`` for a UI "Up" click (pass-through), 6 parametrised cases prove A1 / A1 Mini / A1MINI / A1-MINI / N1 / N2S emit ``G1 Z10.00`` instead (inverted, toolhead up), plus 1 symmetric "Down arrow drops the toolhead via ``G1 Z-``" case. 5 in [`test_printer_manager.py::TestIsBedSlinger`](backend/tests/unit/services/test_printer_manager.py) pin the helper's classification contract — A1 family true, every bed-on-Z model false, None / empty-string safe, case-insensitive. **Safety note:** if you own an A1 or A1 Mini and were running any 0.2.x build before this release, do not use the printer-card bed-jog buttons — they will move the toolhead in the wrong direction. The Z controls in Bambu Studio / Bambu Handy are unaffected (they generate their own model-aware G-code).

- **Spoolman inventory: editing a spool's color name no longer "reverts" to the subtype on save** ([#1319](https://github.com/maziggy/bambuddy/issues/1319), reported by @MartinNYHC) — On Spoolman-backed inventory, changing a spool's color name in the edit dialog appeared to accept the new value but the inventory list column and the next edit-dialog open showed it back to the subtype string. **Three layers stacked on top of each other to produce this:** (1) `find_or_create_filament` at [`backend/app/services/spoolman.py:609`](backend/app/services/spoolman.py) matches existing Spoolman filaments by `material / name / color_hex / vendor` — `color_name` is intentionally not part of the match key (Spoolman doesn't standardise the field and most installs leave it null) — but when a match was found it returned the existing filament's id unchanged, silently dropping the new `color_name` value. The write never reached Spoolman. (2) On re-read, the helper at [`_spoolman_helpers.py:279`](backend/app/api/routes/_spoolman_helpers.py) falls back to `subtype` when `filament.color_name` is empty (without the fallback, Spoolman installs that don't fill the field would render every spool as "Unknown color"). The persisted value was still empty, so the read synthesised the column from `subtype`. (3) The edit form prefilled `color_name` from `spool.color_name` — which on Spoolman installs without `color_name` was the synth value (= subtype). If the user changed `subtype` but not `color_name`, the form silently round-tripped the OLD subtype back to Spoolman as if it were a real user-set `color_name`, which then started showing up as the persisted value on the next render — the exact "color reverts to subtype" pattern in the bug report. **Fixes:** (1) `find_or_create_filament` now patches the matched filament's `color_name` via the existing `patch_filament` PATCH wrapper when the request differs from what's stored. Convention on the parameter: `None` = "don't touch", `""` = explicit clear (patches Spoolman to `null`), any other string = set/update. (2) The PATCH route at [`spoolman_inventory.py:567`](backend/app/api/routes/spoolman_inventory.py) now uses Pydantic's `model_fields_set` to distinguish "field omitted" from "field explicitly set to null" — only the latter is a clear (mirrors the existing `storage_location` pattern at the same site). (3) The map helper now also returns `color_name_is_synthesized: bool` on every inventory record, and [`SpoolFormModal.tsx`](frontend/src/components/SpoolFormModal.tsx) checks it on prefill so the input starts blank when the value was synthesised from subtype — the user sees the real stored state and can't accidentally round-trip the synth value back. The read-side fallback is kept on purpose (the list-display "Unknown color" problem hasn't gone away — it's just that the form no longer treats the fallback as a real value). A `patch_filament` failure is caught and logged but doesn't block the match — the spool still links to the correct filament, only the colour-name update is dropped, which is the safer failure mode. **Regression tests:** 5 in [`test_spoolman_inventory_methods.py::TestFindOrCreateFilament`](backend/tests/unit/test_spoolman_inventory_methods.py) — patch-on-change, no-patch-when-unchanged, no-patch-when-`None`, clear-when-`""`-passed, and patch-failure-still-returns-match-id. 2 in [`test_spoolman_inventory_helpers.py::TestMapSpoolmanSpool`](backend/tests/unit/test_spoolman_inventory_helpers.py) — `color_name_is_synthesized` flag is `False` when a real value is stored, `True` when the fallback fires. 2 integration tests in [`test_spoolman_inventory_api.py`](backend/tests/integration/test_spoolman_inventory_api.py) — wire-level `color_name=null` clears (route translates to `""`), and `color_name` omitted from the PATCH body keeps the current value (route passes `None`). All 564 spoolman-tagged tests pass; ruff clean; frontend build clean.

- **Deleting an SSO user left orphan OIDC/MFA/camera-token rows on SQLite — blocked re-login and leaked auth state** ([#1285](https://github.com/maziggy/bambuddy/issues/1285), [PR #1295](https://github.com/maziggy/bambuddy/pull/1295) by @netscout2001) — On SQLite (default deployment) the `delete_user` route left orphan rows in `user_oidc_links`, `user_totp`, `user_otp_codes`, and `long_lived_tokens` because the project intentionally runs with `PRAGMA foreign_keys=OFF`, so the `ON DELETE CASCADE` declared on those tables never fired. **Reported symptom:** an admin deleted an OIDC-provisioned user, the user tried to re-login via SSO, the OIDC callback found the orphan `UserOIDCLink` pointing at the (now missing) user, failed to resolve it, and redirected to `account_inactive` instead of triggering `auto_create_users`. The same root cause was leaking MFA secrets (`user_totp`), pending email OTP codes (`user_otp_codes`), and per-user camera-stream tokens (`long_lived_tokens` — `verify()` would happily match by `lookup_prefix` even after the owning user was gone). PostgreSQL deployments were unaffected — cascade was firing there. **Fix:** mirrors the existing `APIKey` cleanup pattern in `delete_user` (introduced in PR #1182). `backend/app/api/routes/users.py:delete_user` now explicitly deletes `UserOIDCLink`, `UserTOTP`, `UserOTPCode`, and `LongLivedToken` rows owned by the user; also folds in `PrintBatch.created_by_id` cleanup (same `ondelete=SET NULL` SQLite-FK-off root cause, the `SET NULL` block at `users.py:393-407` was missing it). `backend/app/core/database.py:run_migrations` gains an idempotent startup orphan-cleanup that sweeps the four auth tables (`DELETE FROM <table> WHERE user_id NOT IN (SELECT id FROM users)`), wrapped in `begin_nested()`, logged at INFO only when rows actually drop — so installations carrying orphans from before the fix are healed automatically without manual DB intervention. No-op on Postgres (cascade already fired) and idempotent on SQLite (second run finds nothing). `backend/app/api/routes/mfa.py:list_oidc_links` returns `"<deleted>"` for `provider_name` when `link.provider` is null instead of raising `AttributeError` — covers the symmetric edge case where a `UserOIDCLink` could reference an orphaned provider. **Tests:** 14 new/extended. `test_users_auth_cleanup.py` (new): 5 tests verify `delete_user` removes OIDC/TOTP/OTP/long-lived-token rows individually + combined-cleanup atomically. `test_oidc_relogin.py` (new): full end-to-end test reproducing the #1285 symptom — mocked IdP, first OIDC login, admin delete, second OIDC login proves `auto_create_users` fires again (and pinned the regression boundary by confirming the test fails without the fix). `test_orphan_auth_cleanup_migration.py` (new): 7 tests for per-table cleanup across all four auth tables, idempotency, no-op on fresh install, and survival of rows belonging to real users. `test_mfa_api.py` adds `TestListOidcLinksDefensiveProviderNull` for the null-check. `test_auth_api.py::test_delete_user` extended to assert all five auth-table side effects (`UserOIDCLink`, `UserTOTP`, `UserOTPCode`, `APIKey`, `LongLivedToken`). All 13 PR-added tests + 194 tests in extended files pass; ruff clean. **Reported and patched by @netscout2001.**

- **Slicer bundle import 400/502/503 errors now land in the log so support bundles tell us why** ([#1312](https://github.com/maziggy/bambuddy/issues/1312), reported by @hasmar04) — Reporter hit `400 Bad Request` from `POST /api/v1/slicer/bundles` when uploading a Bambu Studio Printer Preset Bundle (`.bbscfg`); a second contributor had reported the same shape the day before. Same bundle file uploaded fine on Martin's dev machine, which strongly points at sidecar-side differences (image version, write permissions on `DATA_PATH/bundles`, TrueNAS Docker volume perms, etc.) — but triage was blocked because the sidecar's actual reject reason only made it as far as the FE toast. Bambuddy logged just the uvicorn-access line (`POST /api/v1/slicer/bundles HTTP/1.1 400`), with no detail in the support bundle. The route at `backend/app/api/routes/slicer_presets.py:import_slicer_bundle` now emits a `logger.warning` for each of the three failure shapes: **400 (`SlicerInputError`)** — sidecar's reject string is logged alongside the filename and byte count, so we can see "bundle rejected because `manifest.json` is missing" in the next support bundle without asking the reporter to copy the toast text. **503 (`SlicerApiUnavailableError`)** — logs the configured sidecar URL plus the exception detail (separates "URL wrong" from "sidecar offline"). **502 (`SlicerApiError`)** — logs filename + byte count + error string, useful when the sidecar's `DATA_PATH/bundles` write fails (the typical 5xx cause on this path). The 400 case is `WARNING` rather than `INFO` deliberately — it's an unexpected end-user-visible failure, not a routine event. Existing `test_import_bundle_sidecar_400_passes_through` now also asserts the reject reason AND the filename appear in caplog, so the support-bundle-includes-the-diagnostic contract is pinned. Doesn't fix #1312's actual root cause (sidecar-side, still under investigation with reporter) — but the next reporter we get on this code path will produce a bundle that contains the answer.

- **Restarting Bambuddy mid-print triggered plate-check pause + duplicate archive** ([#1304](https://github.com/maziggy/bambuddy/issues/1304), reported by @kleinwareio) — When a P1S print was in progress and the user updated the Bambuddy container (`latest` → `daily` in the report, but the same path fires on any restart), Bambuddy paused the live print with an "Object detected on build plate" warning AND re-archived the in-progress file as a duplicate. Root cause: the print-start detector at `backend/app/services/bambu_mqtt.py:2780` gated on `self._previous_gcode_state != "RUNNING"`, which is true whether we just saw IDLE→RUNNING (a real print start) OR we just constructed a fresh BambuMQTTClient and `_previous_gcode_state` is still its initial `None` (catch-up push from a printer already running). The fresh-client case fired `on_print_start`, which downstream ran the plate-detection-and-pause flow at `main.py` AND the FTP-download-and-archive flow — exactly the two symptoms in the bug report. Fix: added `self._previous_gcode_state is not None` to the `is_new_print` guard, so the first push from the printer in a new process lifetime never counts as a state transition into RUNNING. `_was_running` still flips to `True` via the unconditional "Track RUNNING state" block at `bambu_mqtt.py:2795`, so print-completion detection keeps working — only the start callback is suppressed. Three existing tests that asserted on the old (buggy) behavior were updated to seed `_previous_gcode_state = "IDLE"` first, matching the realistic lifecycle of a print actually starting (Bambuddy has been observing IDLE/FINISH before RUNNING); they now exercise the correct path. New regression test `test_first_running_push_after_bambuddy_restart_does_not_fire_print_start` pins the contract for the reporter's exact scenario — and asserts that `_was_running` still becomes True so completion still fires when the print ends. The `is_file_change` branch was unaffected (it already required `_previous_gcode_file is not None`, so restart-catch-up never reached it anyway).

- **Create User form rejected weak passwords with an opaque "HTTP 422" toast** ([#1303](https://github.com/maziggy/bambuddy/issues/1303), reported by @TrickShotMLG02) — Three independent UX gaps stacked on top of each other. **(1) Discoverability**: the Create User and Edit User modals showed no hint about the backend's password complexity requirements (`min 8 chars` + uppercase + lowercase + digit + special character; enforced in `backend/app/schemas/auth.py:_validate_password_complexity`). Reporter typed an 8-character all-digits password and had no way to know why it failed. **(2) Validation mismatch**: the frontend's pre-submit check at `SettingsPage.tsx` was only `password.length < 6`, accepting passwords the backend would reject — every weak password got bounced after the round-trip instead of getting blocked locally. **(3) Error display fragility**: when the backend returned a 422 with a Pydantic detail array, the API client's error parser at `frontend/src/api/client.ts:107` could fall through to the bare `HTTP ${status}` fallback if the mapped/filtered detail array ended up empty after stripping the `"Value error, "` prefix — masking the real reason as just "HTTP 422". Fixes: (1) added a `passwordRequirements` helper line under both password inputs in Create User / Edit User; (2) extracted `checkPasswordComplexity` into `frontend/src/utils/password.ts`, called from `handleCreateUser` and `handleUpdateUser` before the API request — it returns the same FIRST failing rule the backend's validator would have flagged (uppercase before lowercase before digit before special, matching `_validate_password_complexity`'s order — fixing one rule shouldn't immediately trip a different message), and the submit button is disabled until all rules pass; (3) the API client now falls back to `JSON.stringify(detail)` when the mapped array is empty, so a malformed but non-empty 422 detail surfaces SOMETHING informative instead of a bare status code. New translation keys `settings.passwordRequirements`, `settings.toast.passwordNeeds{Uppercase, Lowercase, Digit, Special}`, plus the existing `passwordTooShort` text updated from "6 characters" to "8 characters". English + German fully translated (German reporter's locale); FR/IT/PT-BR translated using straightforward equivalents; JA/ZH-CN/ZH-TW seeded with English for the new complexity messages (existing project flow for new strings). 7 new unit tests in `frontend/src/__tests__/utils/password.test.ts` pin the validator's contract, including the reporter's exact `"12345678"` input which now produces a local "Password must contain at least one uppercase letter" toast instead of a 422 round-trip.

- **External NAS scan hung forever and never committed subdirectories** ([#1299](https://github.com/maziggy/bambuddy/issues/1299), reported by @joeferrante) — Linking an external mount with ~1200 subdirectories caused the "Link External Folder" modal to spin until the FE gave up, after which the mount appeared in the sidebar but with no subdirectories, and subsequent scans had no effect either. The reporter's support bundle pinpointed two compounding problems. **(1) `TypeError: unsupported operand type(s) for /: 'str' and 'str'` on every STL** — 1,606 instances in the log. `generate_stl_thumbnail` at `stl_thumbnail.py:119` does `thumbnails_dir / thumb_filename`, which requires a `Path`, but the external-scan call site at `library.py:1256` passed both arguments as `str` (`generate_stl_thumbnail(str(filepath), str(thumb_dir))`). Every STL crashed inside the `try/except` and got logged at WARNING level — visible spam but more importantly wasted work (`trimesh.load()` and matplotlib setup ran before the failing division). Fix: defensive `Path()` coerce at the top of `generate_stl_thumbnail` so the function works regardless of how callers pass args. Regression test `test_string_arguments_accepted_without_typeerror` pins the contract. **(2) Scan ran STL thumbnail generation synchronously inside the HTTP request** — even after fix (1), `trimesh.load()` + matplotlib render is 1–5 seconds per STL; on a NAS with thousands of STLs that's hours of work blocking the modal. Frontend would time out, user would refresh, the HTTP request would be cancelled, `db.commit()` at `library.py:1331` would never run, and no folder/file rows would be committed — which is exactly why "subsequent scans have no effect" (each retry started from scratch and hit the same wall). Fix: scan now defers STL thumbnails to a background task. After `db.commit()`, the route spawns `asyncio.create_task(_backfill_external_stl_thumbnails(folder_ids))` with the full set of folder IDs from `folder_cache.values()` (covers both pre-existing subfolders AND the ones created during this scan — `all_folder_ids` is snapshotted before the walk and would have missed the new ones), then returns immediately. The background task opens its own `async_session`, walks every STL file with `thumbnail_path IS NULL` in the linked folder tree, generates each thumbnail, and commits per-file so a server restart mid-run only loses the in-flight thumbnail. Survives FE refresh because the task lives in the FastAPI event loop, not the request scope. The reporter's smaller mount (`/mnt/NAS_3d_files/3mf_Files`, 4 subdirectories) used to work because it completed inside the FE timeout window — with this fix, the 1200-subdir parent mount completes equally fast and thumbnails fill in over the following minutes. **Auto-scan after create unchanged**: `FileManagerPage.tsx:1147-1151` still calls `scanExternalFolder` immediately after `createExternalFolder`, which is correct UX — what changed is that the scan response now arrives in seconds instead of timing out.

- **MakerWorld "Open Cloud settings" link landed on the wrong page** ([#1300](https://github.com/maziggy/bambuddy/issues/1300)) — On the MakerWorld page, the "Open Cloud settings" hyperlink shown in the sign-in-required banner (when no Bambu Cloud token is stored) pointed at `/settings?tab=cloud`. The Settings page has no `cloud` tab (its tabs are general/plugs/notifications/queue/filament/network/apikeys/virtual-printer/spoolbuddy/failure-detection/users/backup), so the URL-param check at `SettingsPage.tsx:179` (`validTabs.includes(tabParam) ? tabParam : 'general'`) silently fell back to the General tab. The Bambu Cloud login UI actually lives on the Profiles page (`/profiles`), which already defaults its sub-tab to `cloud` — the same destination the existing `backup.cloudLoginRequired` i18n string ("Sign in under Profiles → Cloud Profiles…") documents. One-line fix in `MakerworldPage.tsx:438`: `to="/settings?tab=cloud"` → `to="/profiles"`. The Profiles page's `useState<ProfileTab>('cloud')` (line 2822) means no query param is needed — landing on `/profiles` opens the Cloud sub-tab directly.

- **External-spool prints no longer credit usage to AMS slot 0's Spoolman spool** ([#1276](https://github.com/maziggy/bambuddy/issues/1276), reported and diagnosed by @ojimpo — regression of #853) — On a single-filament external-spool print (TPU loaded in `vir_slot id=254` on the reporter's H2S + AMS 2 Pro), `_resolve_global_tray_id` in `spoolman_tracking.py` was crediting the usage to whatever Spoolman spool happened to be linked to AMS slot 0 — a completely unrelated material in the reporter's case. ~48.94 g of TPU was credited to a PLA spool across 4 prints before they noticed. Root cause: BambuStudio encodes virtual tray IDs (254/255) as `-1` in the flat `ams_mapping` array it sends to the printer (a convention already documented in `bambu_mqtt.py:start_print()`), but the spoolman tracking helper was treating `-1` as "unmapped → use position-based default" and the default mapped `slot_id=1` → `global_tray_id=0`. When `slot_to_tray[slot_id-1] == -1` and `ams_trays` contains an external slot (254 or 255), the helper now returns the external tray ID directly, matching the convention `start_print()` uses on the other side of the pipeline. Prefers 254 over 255 (consistent with single-nozzle `tray_now` reporting and the `vir_slot` id=255→254 remap in `bambu_mqtt.py:864`). Legacy behavior preserved when `ams_trays` is empty or contains no external slot (callers that don't pass `ams_trays` keep the position-based fallback). Two regression tests cover the reporter's exact scenario (`ams_trays={0,1,2,3,254}, slot_to_tray=[-1]` → 254) plus the H2D-deputy case and the fall-through-when-no-external case. **Root cause investigation and patch by @ojimpo.**

- **Virtual-printer queue mode now honors workflow default print options** ([#1235](https://github.com/maziggy/bambuddy/issues/1235), reported by @jc21, root cause and patch by @jc21 in #1277) — Prints sent from Bambu Studio (or any slicer) to a VP in `print_queue` mode arrived in the queue with `bed_levelling`, `flow_cali`, `vibration_cali`, `layer_inspect`, and `timelapse` set to the SQLAlchemy column-level defaults, never the user's workflow preferences. The reporter happened to have every workflow default set to the opposite of the column defaults, so prints appeared to have all five options inverted; every queue item required hand-editing before dispatch. The manual `POST /print-queue/` endpoint reads these fields off the request body (the frontend pulls them from settings before submitting), but the VP-FTP-receive path at `backend/app/services/virtual_printer/manager.py:_add_to_print_queue` constructed `PrintQueueItem` without touching them at all — SQLAlchemy then filled in `bed_levelling=True, flow_cali=False, vibration_cali=True, layer_inspect=False, timelapse=False` regardless of what was in the DB. Fix reads `default_bed_levelling` / `default_flow_cali` / `default_vibration_cali` / `default_layer_inspect` / `default_timelapse` via the existing `get_setting()` helper (same pattern already used in the function for `virtual_printer_archive_name_source`) and passes them explicitly to `PrintQueueItem`. A small `_bool_setting()` helper maps `None → AppSettings schema default`, so a fresh install with no workflow page customization behaves identically to before. Regression tests: `test_add_to_print_queue_uses_workflow_defaults_from_settings` (verifies all five settings flow through with values opposite to the column defaults, matching the reporter's exact scenario) and `test_add_to_print_queue_falls_back_to_schema_defaults_when_unset` (verifies the no-DB-row path).

- **Linking a Spoolman spool to an AMS-HT slot no longer fails with a CHECK constraint error** ([#1274](https://github.com/maziggy/bambuddy/issues/1274), reported by guillaume.houba) — On H2C / H2D, AMS-HT units report `ams_id` 128+ (one ams_id per unit, single tray). The `spoolman_slot_assignments` table's `ck_ams_id_range` constraint only allowed 0-7 (standard AMS) or 255 (external), so the upsert on `POST /spoolman/inventory/slot-assignments` blew up with `IntegrityError: CHECK constraint failed: ck_ams_id_range` and the user had no way to link any spool to an AMS-HT slot. Widened the constraint formula to `(ams_id >= 0 AND ams_id <= 7) OR (ams_id >= 128 AND ams_id <= 191) OR ams_id = 255` — matches the value range the internal `spool_assignment` table already accepts and leaves room for up to 64 AMS-HT units (the existing `bambu_mqtt`/usage-tracker code uses the same 128-based addressing). Updated in the ORM model (`models/spoolman_slot_assignment.py`) and both the SQLite/Postgres `CREATE TABLE` DDL in `core/database.py`. New idempotent migration `_migrate_widen_spoolman_slot_ams_id_range`: Postgres path runs `DROP CONSTRAINT IF EXISTS` + `ADD CONSTRAINT` (no data risk — the new formula is strictly wider than the old); SQLite path detects the stale formula in `sqlite_master`, table-rebuilds via the standard `_v2` rename pattern used elsewhere in this file (`_migrate_update_auto_link_constraint` at `database.py:418`), and leaves pre-constraint legacy tables untouched. Tests: `test_ams_id_check_admits_ams_ht_range` (ORM + DDL formula) and `test_assign_accepts_ams_ht_id` (end-to-end `POST /slot-assignments` with `ams_id=128`).

- **X2D live camera stream no longer cut by Obico polling / snapshot capture** ([#1271](https://github.com/maziggy/bambuddy/issues/1271), reported by @clabeuhtegrite) — The MJPEG fan-out broadcaster from #1089 lets multiple browser viewers share one upstream RTSP socket per printer, but internal callers (Obico AI polling at the user's configured `obico_poll_interval`, and the manual `/camera/snapshot` endpoint) still opened their own fresh RTSP connections. X1C / H2D / P2S firmware tolerates brief concurrent camera sockets so the gap was invisible there. X2D firmware `01.01.00.00` (and likely future firmwares) enforces strict single-camera-connection more aggressively: every Obico poll (default every 5 s) kicked the live stream, the broadcaster paid the multi-second RTSP handshake to reconnect, and the user saw the stream cut "all the time." New helper `try_get_active_buffered_frame(printer_id)` at [`api/routes/camera.py:74`](backend/app/api/routes/camera.py) returns the broadcaster's last buffered frame (always <1 s old while any viewer is connected) and `None` when no viewer is active. Obico's `_capture_frame` and the `/camera/snapshot` endpoint check it first and only fall through to a fresh socket when no stream is running — preserving today's behavior when nobody is watching. `plate_detection` and `layer_timelapse` deliberately not converted: plate-detection needs guaranteed-fresh frames post-print (false-positive risk if the user already grabbed the print in the same second), and layer-timelapse is for external cameras only. Regression tests: `test_camera_snapshot_reuses_buffered_frame_when_stream_active` and two `TestCaptureFrameSharesBroadcasterUpstream` Obico tests.

- **Usage tracker: spool swaps in UNUSED slots mid-print no longer charge the old spool** ([#1269](https://github.com/maziggy/bambuddy/issues/1269), reported by @maugsburger) — Path 2 of the usage tracker (AMS remain% delta fallback) iterated every AMS tray that had a remain% delta, even slots the print never touched. When a user swapped spools in an unrelated slot during a print, the new spool reports `remain=0` (no RFID tag yet) while the snapshot from print-start was 100%, so the fallback charged the originally-assigned spool the full 1000 g. Reporter's case: single-filament print on AMS0-T3 (`ams_mapping=[3]`), swapped a spool in T1 and another in T2 to refill while the print continued — wound up with `Spool 27 consumed 1000.0g (100%) on printer 1 AMS0-T1` and `Spool 24 consumed 170.0g (17%) on printer 1 AMS0-T2`, neither of which were ever in the print. Fix: the fallback now builds `print_used_keys` from `session.ams_mapping`, `state.tray_change_log`, and `session.tray_now_at_start` (the three runtime signals telling us which trays were actually part of the print), converts each global tray ID to `(ams_id, tray_id)` using the standard convention (254/255 → external, ≥128 → AMS-HT, otherwise `id // 4, id % 4`), and skips fallback for trays whose key is not in that set. When all three signals are empty (legacy edge case: no slicer push, no MQTT tray-change events, no `tray_now` at start) the legacy "scan every tray" behavior is preserved so we don't regress prints with no metadata. Regression test in `test_usage_tracker.py::test_skips_fallback_for_trays_outside_print_mapping` reproduces the reporter's exact scenario.

- **Printer card: smart-plug live wattage now rounded to whole watts** ([#1266](https://github.com/maziggy/bambuddy/issues/1266), reported by @Carter3DP) — The printer card's smart-plug status badge rendered `plugStatus.energy.power` raw, so plugs that report fractional watts (Kauf PLF12 via ESPHome / Home Assistant in the reporter's case, but any MQTT plug pushing a float can hit this) showed values like `14.123456789012` W and overflowed the card width. `SmartPlugCard` and `SwitchbarPopover` already wrapped the same field in `Math.round()`; only the printer-card badge was missing the round. Single-line fix at `frontend/src/pages/PrintersPage.tsx:4569`.

## [0.2.4] - 2026-05-11

### Added
- **Build-plate icon on archive cards + uniform printer/model line** ([#1253](https://github.com/maziggy/bambuddy/issues/1253), reported by @tonygauderman) — Archive cards now show an OrcaSlicer-style bed icon in the printer/model row indicating which build plate the print was sliced for (Cool / Cool SuperTack / Engineering / High Temp / Textured PEI / Smooth PEI), with the full plate name in the hover tooltip. Closes the gap where users had to remember which plate matched a re-print or open the source 3MF in a slicer just to read the bed setting. **Card row also unified:** archives with a real Bambuddy-printer association used to render as `H2D-1 GCODE …` while slicer-only uploads rendered as `Sliced for X1C GCODE …` — same line, two different shapes. Dropped the `Sliced for ` prefix so both render as a uniform `<name-or-model> [bed-icon] GCODE <hash>` row, scanning the same regardless of provenance. **Backend:** new `bed_type` column on `print_archives` (idempotent `ALTER TABLE` migration; SQLite + Postgres safe), populated from `curr_bed_type` in `Metadata/slice_info.config` (per-plate metadata, the authoritative source — that's the bed type that actually got sent to the printer for the exported plate) with a fallback to `Metadata/project_settings.config`'s top-level `curr_bed_type` for older 3MF shapes. Wired through both code paths that produce archive responses: `archive_to_response()` (the hand-rolled dict converter at `archives.py:97` — easy to miss, the schema-only change is silently dropped by Pydantic since the route bypasses `from_attributes`) and the `/rescan` endpoint, so old archives can be re-parsed by the user via the existing per-archive Rescan button. Newly-ingested archives get the value automatically. **Backfill script:** `scripts/backfill_archive_bed_type.py` (with `--dry-run`) re-opens every NULL archive's 3MF on disk and populates the column — opt-in for users who want their entire history covered without waiting for natural turnover. Auto-loads `.env` from project root *before* importing backend modules (since `core/config.py:52` reads `DATABASE_URL` from `os.environ` at import time, not from `pydantic-settings` at `Settings()` time), prints the resolved DB URL with credentials redacted on every run so operators can confirm they're hitting the intended database (Postgres / SQLite — Bambuddy supports both per #1219's `DATABASE_URL` pathway), and calls `init_db()` itself before querying so the migration applies even if the script is run against a database the backend hasn't touched yet. **Frontend:** 6 OrcaSlicer-style PNGs ship in `frontend/public/img/bed/` (under `/img/` because that path was already statically mounted at `main.py:5244`; the `/bed-icons/` toplevel attempted first hit the SPA catch-all and returned `index.html` as `text/html`, which the browser then rendered nothing for). New `utils/bedType.ts` maps slicer strings (case-insensitive) to icon + human-readable label; covers Bambu Studio and OrcaSlicer's diverging spellings for the same physical plate (e.g. `Cool Plate` ↔ `PC Plate`, `Cool Plate (SuperTack)` ↔ `Supertack Plate` ↔ `Bambu Cool Plate SuperTack`). Renders on both card-grid view and list view in `ArchivesPage.tsx`. Unmapped or NULL `bed_type` simply omits the icon, so cards stay clean for archives created before this change. Note on icon mapping: `bed_pei.png` → Textured PEI, `bed_pei_cool.png` → Smooth PEI is a best-guess from the OrcaSlicer asset names — swap the two paths in `bedType.ts` if a future user reports the icons reversed for their plate.

- **Spool labels: new 40×30 mm template, hex colour code, bolder brand line** ([#809](https://github.com/maziggy/bambuddy/issues/809) follow-up, requested by @oliboehm) — Three small enhancements to the spool-label printer rolled into one change. **(1) New `box_40x30` template** — 40×30 mm single label, common DK/Brother roll size. Added to `_SINGLE_LABEL_SIZES_MM` in `backend/app/services/label_renderer.py` and to the request body's `Literal[...]` enum in `backend/app/api/routes/labels.py`; height is ≥ 20 mm so it routes through the existing roomy layout (swatch + QR + full text column). **(2) Colour hex code on every label** — new `_hex_code_label()` helper formats `data.rgba` as `#RRGGBB` (alpha-stripped, uppercased to match the inventory UI's colour-picker convention) and returns `""` for missing/malformed input so the caller skips drawing instead of throwing. Rendered as a small line under the material/subtype line in the roomy layout, and as a third line above the spool ID in the tight (AMS) layout — useful when several near-identical material/colour spools sit next to each other in the AMS or on a shelf. **(3) Brand line bigger + bold** — the brand on every label now renders in `Helvetica-Bold` instead of `Helvetica` regular, with size bumped 5.5pt → 6.5pt on the tight layout and 7pt → 8pt on the roomy layout, so it's the most legible non-ID field at arm's length. **Wiring:** `SpoolLabelTemplate` union in `frontend/src/api/client.ts` extended with `'box_40x30'`; `LabelTemplatePickerModal` gets a new `TEMPLATE_OPTIONS` entry for it; `inventory.labels.templates.box40x30.{label,hint}` keys added across all 8 locales (en + de fully translated, fr/it/ja/pt-BR/zh-CN/zh-TW translated to native, with the existing per-key fallback in the modal as a safety net). The 5-template grid still wraps to 2 columns on small viewports per #1230's fix; modal regression test was widened from `4` to `5` template buttons. **Tests:** `ALL_TEMPLATES` parametrize tuple in `test_label_renderer.py` extended with `box_40x30` so all 7 generic invariants (PDF header, empty-input, multi-colour, missing-fields, malformed-rgba, long strings, sheet pagination) cover the new template; new `test_hex_color_code_rendered_when_rgba_set` (asserts `#F5E6D3` appears in the uncompressed PDF for both 40×30 and 62×29), `test_hex_color_code_skipped_when_rgba_invalid` (regex pin: no `#RRGGBB` shape on the label when rgba is malformed, except the spool ID's `#42`), and `test_brand_rendered_in_bold_per_809_followup` (asserts `Helvetica-Bold` font reference is in the PDF — caught a regression if the brand line ever reverts to regular weight). All 33 backend tests + 15 frontend modal tests pass; ruff clean.

- **Copy spool — duplicate any spool's settings into a fresh inventory row in two clicks** ([#1234](https://github.com/maziggy/bambuddy/issues/1234), [PR #1246](https://github.com/maziggy/bambuddy/pull/1246) by @MiguelAngelLV) — Adds a copy button (`Copy` icon) next to the existing edit button on every spool in the inventory page across all three views (table row, card, grouped table inner row). Clicking it opens the existing `SpoolFormModal` pre-filled with every field from the source spool — material, brand, color, slicer preset, label/core/cost, K-profiles, all of it — except `weight_used` which is reset to 0 (since the new spool starts full) and the RFID identity fields (`tag_uid`, `tray_uuid`, `tag_type`, `data_origin`) which aren't part of the form payload anyway, so the new spool is its own physical roll. Save calls `api.createSpool` (or `api.createSpoolmanInventorySpool` in Spoolman mode — both inherit the dispatch routing for free). Closes the long-running gap where users with many near-identical spools (e.g. five 1 kg PETG-CF rolls bought in a single order) had to re-enter every field from scratch on each one. **Implementation shape:** `SpoolFormModalProps.mode: 'create' | 'edit' | 'copy'` (exported as `SpoolFormMode`) replaces the previous `isEditing = !!spool` heuristic — every existing call site in `InventoryPage.tsx` was updated to pass the explicit mode, and the modal's title / submit-button label / weight-reset gate / submit-route branching all key on `mode` directly. The `onCopy` callback is optional on `SpoolCard`, `SpoolTableRow`, and `SpoolTableGroup` (matches the existing `onPrintLabel?` pattern), so the button is conditionally rendered and other consumers of those subcomponents don't get a copy affordance forced on them. Card-view and table-row buttons stop click propagation so clicking copy doesn't also fire the parent row's edit handler. **Quick Add interaction:** the Quick Add toggle is gated `mode === 'create'` (was `!isEditing`), so it stays out of copy mode — otherwise a user could enable Quick Add and bump quantity to N under the singular "Copy Spool" title and silently bulk-create N copies via `bulkCreateMutation`. **i18n:** new `inventory.copySpool` key across all 8 locales (en + de translated, fr/it/ja/pt-BR/zh-CN/zh-TW seeded with English fallback per project flow). **Tests:** 3 new in `SpoolFormModal.test.tsx` (`SpoolFormModal copy mode` describe block — title shows "Copy Spool", save calls `createSpool` not `updateSpool`, `weight_used` reset to 0 in the create payload when copying a spool with non-zero usage), 2 new in `InventoryPageCopyButton.test.tsx` (table-row copy button click → "Copy Spool" heading, cards-view copy button click → same heading after switching view modes) — guards against the three call sites drifting apart. Existing `SpoolFormBulk.test.tsx` and `SpoolFormModal.test.tsx` renders that omitted the `mode` prop were updated with the explicit `mode="create"` so the tightened Quick Add gate doesn't hide the toggle from them. Both `InventoryPageCopyButton.test.tsx` and `InventoryPageDeepLink.test.tsx` gained MSW handlers for the modal's open-time fetches (`/api/v1/cloud/status`, `/api/v1/cloud/local-presets`, `/api/v1/cloud/builtin-filaments`, `/api/v1/inventory/color-catalog`, `/api/v1/inventory/spool-catalog`, `/api/v1/printers/`) — without them MSW passes through to the real network, ECONNREFUSEs, and the rejected fetch resolves after the test environment is torn down, surfacing as a flaky "window is not defined" unhandled rejection in the modal's `setLoadingCloudPresets(false)` finally block (pre-existing flake hit ~1 in 3 full-suite runs at PR head).

### Fixed
- **`.bbscfg` Printer Preset Bundle import was broken for every user since launch — sidecar compose file pointed at the wrong branch** ([#1312](https://github.com/maziggy/bambuddy/issues/1312), reported by @hasmar04, confirmed by @netscout2001) — `slicer-api/docker-compose.yml`'s `build.context` pointed at `https://github.com/maziggy/orca-slicer-api.git#bambuddy/profile-resolver`, but the `POST /profiles/bundle` endpoint plus the `uploadBundle` multer middleware were only ever committed to a sibling branch `bambuddy/bundle-import` (commit `a3172c5`, 2026-05-06). Every user who ran the documented `docker compose up -d` got a sidecar without the bundle endpoint &mdash; their `POST /profiles/bundle` fell through to the generic `POST /profiles/:category` handler, which either rejected with "Name cannot be empty" (no `name` form field sent) or "Invalid file type. Only JSON files are allowed." (the JSON multer filter rejecting the `.bbscfg`). **Fix:** `bambuddy/bundle-import` fast-forward-merged into `bambuddy/profile-resolver` in the orca-slicer-api repo and pushed, so the compose file's existing branch ref now points at the right commit. No Bambuddy code change. Existing users rebuild with `cd slicer-api/ && docker compose --profile bambu build --no-cache --pull && docker compose --profile bambu up -d` &mdash; `--pull` is the key flag because BuildKit caches the git fetch context separately from layer caches, so `--no-cache` alone silently reuses the old branch checkout. New users on 0.2.5+ are unaffected. Lesson on diagnosis flow: the wrong root cause was reported twice during triage before the actual branch mismatch was caught &mdash; first as "build a week ago, before the bundle endpoint existed" (correct claim for the wrong branch), then as "rebuild with --pull" (still hit the same bug because the compose file pointed at the branch that never got the work). The reporter's third round of logs &mdash; the multer "Only JSON files are allowed" error string from `upload.js:17`, which only matches `uploadJson` not `uploadBundle` &mdash; was the smoking gun that no amount of rebuilding would help because the wired-up branch genuinely lacked the endpoint.

### Changed
- **Support bundle records slicer-API CLI versions; wiki sidecar-update docs hardened** ([#1312](https://github.com/maziggy/bambuddy/issues/1312) follow-up) — Triage scaffolding added during investigation of the bundle-import bug above. Useful independent of that fix: the next time a user reports a sidecar-related failure, the support bundle will identify which slicer CLI version is actually running without needing a manual `curl /health`. **Backend:** new `_fetch_slicer_health(url)` helper in `backend/app/api/routes/support.py` does a 2-second GET on `<sidecar>/health`, parses the JSON, and walks every non-`dataPath` key under `checks` looking for a `version` field &mdash; needed because the wrapper labels both bambu-studio-api and orca-slicer-api as `checks.orcaslicer` regardless of which CLI is actually bundled (cosmetic wrapper bug, not Bambuddy's). `_collect_slicer_api_info` now calls it instead of the bare reachability ping and adds two new fields per side to the integrations block: `bambu_studio_version`, `orcaslicer_version`. Captures `"unknown"` verbatim when the wrapper's `--help` regex didn't match (which is itself diagnostic). Behavior preserved on error paths: empty URL returns `None`, connection failure returns `{reachable: False, version: None}`, malformed/non-200 returns `{reachable: True, version: None}` so the reviewer can separate network failure from misconfiguration. Trailing-slash in the configured URL is stripped before appending `/health`. **Tests:** 9 new in `TestFetchSlicerHealth`; existing `TestCollectSlicerApiInfo` tests updated to patch `_fetch_slicer_health` and assert the new `_version` fields. All 62 helper tests pass; ruff clean. **Docs:** `bambuddy-wiki/docs/features/slicer-api.md` got four additions. (1) Quick Start gains a warning callout that the Compose file builds from a branch tip and a plain `docker compose up -d` will keep using the originally-built image. (2) The Updating section now recommends `docker compose --profile bambu build --no-cache --pull` (both flags) and explains why both matter. (3) New troubleshooting entry for the "Name cannot be empty" / "Only JSON files are allowed" `.bbscfg` import error. (4) New troubleshooting entry for the orphan-container conflict (`container name "/bambu-studio-api" is already in use`) that hits users whose existing containers were built from an older compose file with un-prefixed image tags. The pre-existing `/health version: "unknown"` entry also got a note clarifying that the wrapper mislabels the `checks` field as `orcaslicer` for both sidecars &mdash; both are cosmetic, not stale-image indicators.

### Fixed
- **LDAP settings: "Advanced" collapsible section header was always rendering in English regardless of UI language** ([#1297](https://github.com/maziggy/bambuddy/issues/1297), reported by @Fuechslein) — `LDAPSettings.tsx:352` calls `t('settings.ldap.advanced') || 'Advanced'`, but the translation key was never defined in any locale file. The `|| 'Advanced'` fallback kicked in and the header rendered as English in every language. Added `settings.ldap.advanced` to all 8 locales: `Advanced` (en), `Erweitert` (de), `Avancé` (fr), `Avanzate` (it), `詳細設定` (ja), `Avançado` (pt-BR), `高级` (zh-CN), `進階` (zh-TW). No component change needed — the fallback now never triggers because the key resolves properly. i18n parity check holds at 4754 leaves across all locales.

- **Clear Plate button required granting Settings > Read Settings, leaking the entire Settings UI to non-admin users** ([#1293](https://github.com/maziggy/bambuddy/issues/1293), reported by @Tivonfeng) — On the Printers page, the "Clear Plate" button is gated on the global `require_plate_clear` setting being `true`. The page reads that value from `GET /api/v1/settings`, which requires `Permission.SETTINGS_READ`. A user with `printers:clear_plate` but no `settings:read` got a 403 on the settings fetch, the frontend's `settings` query stayed undefined, `requirePlateClear` evaluated to `false`, and the button never rendered. The reporter's workaround — also grant `settings:read` — works but also adds the Settings nav item to the sidebar and grants visibility of SMTP/LDAP/MQTT credentials and every other setting in the DB, which is exactly the leak they were trying to avoid. **Fix:** new `GET /api/v1/settings/ui-preferences` endpoint that returns a curated dict of UI rendering fields without requiring SETTINGS_READ — matches the existing `GET /settings/default-sidebar-order` precedent (intentionally unauthenticated for the same reason — UI rendering needs values that aren't admin-gated). Exposed fields are explicitly opt-in via a `_UI_PREFERENCE_FIELDS` tuple in `routes/settings.py`: `require_plate_clear`, `check_printer_firmware`, `camera_view_mode`, `time_format`, `date_format`, `drying_presets`, `ams_humidity_good`, `ams_humidity_fair`, `ams_temp_good`, `ams_temp_fair`, `bed_cooled_threshold`. Anything not on that list — including every sensitive field — is never returned, no matter what's in the DB. PrintersPage now fetches from `/settings/ui-preferences` via a new `api.getUiPreferences()` client method; the cache key changed from `['settings']` to `['ui-preferences']` so it doesn't collide with the admin-gated full settings query other admin pages still use. As a side-effect, the page's 4 other settings-driven UI features (drying presets, camera view mode, time format display, firmware-check banner) also stop silently degrading for non-admin users — they all live on the same fetch. Regression tests in `backend/tests/integration/test_settings_ui_preferences.py` pin: endpoint returns 200 without SETTINGS_READ, response includes `require_plate_clear` as a bool, field set exactly matches `_UI_PREFERENCE_FIELDS` (so accidentally adding a sensitive field there fails the test), and a "secret canary" test that seeds 23 sensitive keys with recognizable values and asserts none of them appear in either the response keys or the response body. Frontend types in `client.ts` tighten `camera_view_mode` and `time_format` to the same literal unions as `AppSettings` so the new endpoint slots into PrinterCard's prop types without casts.

- **LDAP user logins wiped manually-assigned BamBuddy groups** ([#1292](https://github.com/maziggy/bambuddy/issues/1292), reported by @Fuechslein) — When an admin assigned an LDAP-authenticated user a BamBuddy group that wasn't mapped from LDAP (e.g. "Administrators" while the LDAP mapping only covered "Users"), the assignment vanished on the user's next login. The reporter's observation matched the code exactly: assigning a group while the user was logged in held until the next login because `user.groups` was just mutated in memory; on next login, `_sync_ldap_user` in `backend/app/api/routes/auth.py:1187` rebuilt `user.groups` from LDAP state alone and blew away the manual assignment. The design intent (LDAP truth must propagate, including revocation) was correct, but the implementation was over-broad — every BamBuddy group got wiped, not just LDAP-mapped ones. **Fix:** `_sync_ldap_user` now computes the set of "LDAP-managed" BamBuddy group names = values of `ldap_group_mapping` ∪ `{ldap_default_group}`. Groups inside that set are still rebuilt from LDAP truth on each login (so revocation works). Groups outside that set are treated as manual admin assignments and preserved. The partition happens via a list comprehension over `user.groups`; no schema or DDL change. Edge case explicitly tested: a manual assignment to a group that IS in the LDAP mapping is still overridden by LDAP state — once an assignment is in the user_groups table you can't tell manual-but-mapped from LDAP-derived, so LDAP wins for any group it has authority over. Regression tests in `backend/tests/integration/test_ldap_group_sync.py` cover: manual group survives login (the reporter's exact scenario), revocation still propagates for LDAP-managed groups, default_group persists across empty-LDAP logins, manual assignment to a managed group is overridden, and the realistic mixed case where a user has multiple manual + multiple LDAP groups at once.

- **Internal inventory: `storage_location` field was silently dropped on save and never shown in the table** ([#1291](https://github.com/maziggy/bambuddy/issues/1291), reported by @needo37) — The `storage_location` column existed on the Spool ORM model (`backend/app/models/spool.py:57`) but was missing from the Pydantic schemas in `backend/app/schemas/spool.py` (`SpoolBase`, `SpoolUpdate`, and by extension `SpoolResponse`). Pydantic silently strips unknown fields, so PATCH writes to `/inventory/spools/{id}` reached the update route's `model_dump(exclude_unset=True)` already missing the field, the `setattr` loop never touched the DB column, and GET responses left it out — the inventory table always showed "—" in the Storage Location column even when the user had typed and saved a value. Only the internal inventory was affected; Spoolman mode worked because it goes through a separate proxy backend with its own schema. Fix is two added fields in `schemas/spool.py`: one on `SpoolBase` (covers `SpoolCreate` + `SpoolResponse` via inheritance) and one on `SpoolUpdate` (standalone). Both constrained to `max_length=255` to match the DB column's `String(255)`. No route changes needed — the update handler at `inventory.py:961` already uses the generic dump-then-setattr pattern that picks up any new schema field automatically. Note on UX intent: `storage_location` is the user-defined free-text label ("Drybox #1", "Top shelf"), distinct from `location` which is the AMS slot assignment ("AMS-A slot 3") — keeping both is the right call. Regression tests in `test_spool_schemas_storage_location.py` lock in: create/update accept the field, the response surfaces it, explicit-null clears via `exclude_unset` round-trip, omitted-on-PATCH is left untouched (doesn't accidentally clear), and `max_length=255` is enforced (so the API returns a clean 422 instead of a SQLAlchemy column-length error).

- **Archives page didn't auto-refresh when a slicer sent a print to a Virtual Printer — the new card only appeared after switching tabs** ([#1282](https://github.com/maziggy/bambuddy/issues/1282), reported by @kleinwareio) — Real-printer prints broadcast `archive_created` over the WebSocket from `main.py`'s MQTT `print_start` handler, and the Archives page listens for that event in `frontend/src/hooks/useWebSocket.ts:241` to invalidate its react-query cache. The VP file-receive paths in `backend/app/services/virtual_printer/manager.py` (`_archive_file` for immediate mode and `_add_to_print_queue` for queue mode) created the archive and committed it to the DB but never broadcast the event — so the page stayed stale until the user clicked another tab and back, which triggered a refetch on focus. **Fix:** factored a small `_broadcast_archive_created(archive)` helper onto `VirtualPrinterInstance` that imports `ws_manager` lazily (matches the file's existing late-import convention for archive/queue imports) and emits the same `{id, printer_id, filename, print_name, status}` payload shape `main.py` uses. Called from both VP paths immediately after the archive is logged (`_archive_file`) and after the queue item is committed (`_add_to_print_queue`). Broadcast failures are swallowed at debug level so a transient WebSocket issue can't break the file-receive flow. The review mode path (`_queue_file`) is intentionally untouched — it creates a `PendingUpload`, not a `PrintArchive`, and renders on a different page. **Tests:** `test_archive_file_broadcasts_archive_created` and `test_add_to_print_queue_broadcasts_archive_created` patch `ws_manager.send_archive_created` and assert it's called once with the right payload shape. **Affects:** every Bambuddy install using a VP in `immediate` or `print_queue` mode; review mode and proxy mode are unaffected.

- **Virtual Printer wedged the slicer at "Downloading...(0%)" when a user clicked Print (instead of Send) against a non-proxy-mode VP, and blocked the next dispatch with "The printer is busy with another print job"** ([#1280](https://github.com/maziggy/bambuddy/issues/1280), reported by @kleinwareio) — Bambuddy's VP supports two distinct dispatch flows from the slicer: **Send** (file upload only — the path queue / immediate / review modes are designed for) and **Print** (file upload + start-print, intended for proxy mode where there's a real printer behind the VP). The reporter's setup was queue mode but they clicked Print, which is unsupported there. The user-facing symptom was wedging instead of a clean error: the FTP upload completed, the file landed in Bambuddy's queue, but Orca's UI froze at `Downloading...(0%)` and the next attempt was blocked. **Cause:** the VP's simulated state machine, in `backend/app/services/virtual_printer/manager.py::on_file_received`, jumped `PREPARE → IDLE` directly after the FTP upload completed. The Send flow doesn't watch the post-upload state, so Send users never noticed. The Print flow watches the gcode_state cycle expecting `PREPARE → RUNNING → FINISH` and only releases its in-flight-job lock when it sees `FINISH` (or `FAILED`). Going `PREPARE → IDLE` looks to the Print-flow slicer like "printer abandoned my job without confirming completion" → UI keeps the prior job pinned → next dispatch is blocked. `gcode_file_prepare_percent` also stayed at `"0"` for the whole upload window, which is why Orca's "Downloading X%" progress bar never advanced. **Fix:** `on_file_received` now transitions `PREPARE → FINISH` with `prepare_percent="100"` and the just-completed filename. The VP's 1-Hz periodic status push (`mqtt_server.py:363`) broadcasts the new state to every connected slicer within a second, so Orca clears its lock and the next dispatch goes through. The transition is gated to `.3mf` uploads only — auxiliary uploads (printer-side `.gcode` blobs etc.) leave the visible state alone. Treats Print and Send identically in non-proxy modes — Print is now silently handled as "file received, treat as completed" instead of wedging the slicer. Send remains a no-op behavior change because Send doesn't watch the post-upload state. **Tests:** 2 new tests in `backend/tests/unit/services/test_virtual_printer.py` pin (1) the FINISH transition with the correct filename + prepare_percent="100", and (2) the non-3MF guard. Affects every VP mode that isn't proxy (`immediate`, `print_queue`, `review`) on every slicer using the Print flow (BambuStudio + OrcaSlicer in LAN-mode).

- **External-spool filament selection silently rolled back: every "Generic PLA" / preset change for the external slot looked applied in the UI but failed on the printer, and the next print threw "no mapping"** ([#1279](https://github.com/maziggy/bambuddy/issues/1279), reported by @kleinwareio) — Repro: P1S, no AMS, vt_tray active. User picks any filament for the external slot via Bambuddy. The UI looked normal, but the printer's MQTT response was `{"command":"ams_filament_setting", "result":"fail", "reason":"error string"}`. The companion `extrusion_cali_sel` command succeeded, so the K-profile stuck but the filament *identity* didn't — and the next print therefore had nothing to map to. **Cause:** `backend/app/services/bambu_mqtt.py::ams_set_filament_setting` encoded the single-external-spool case as `{ams_id: 255, tray_id: 0, slot_id: 0}`. The "LOCAL `tray_id = 0`" comment in the code was a misread of the printer's *response* shape (the printer echoes `tray_id: 0` as the slot-within-virtual-unit, not the slot index used in the *request*). **Verification:** captured BambuStudio → X1C `ams_filament_setting` publish via `mosquitto`-compatible paho-mqtt subscriber on the same broker, BambuStudio set the external slot to a PLA preset, the published REQ was `{ams_id: 255, tray_id: 254, slot_id: 0, tray_info_idx: "P4d64437", tray_color: "F72323FF", tray_type: "PLA", ...}` and the printer's REP returned `result: "success"`. The on-wire convention for `ams_filament_setting` on the external spool is therefore the *global* tray index (`tray_id: 254`), not a local slot number (`tray_id: 0`). **Fix:** `mqtt_tray_id = 254` for the single-external branch in both `ams_set_filament_setting` and `reset_ams_slot` (which shares the convention). The dual-external branch (H2D, `len(vt_tray) > 1`) was **not** in the captured exchange and is left at `mqtt_tray_id = 0` until a Studio → H2D capture confirms the correct value — a regression test pins the current dual-external encoding so any future change to that branch surfaces immediately. **Affected printers:** every printer whose MQTT push reports `vt_tray` as a single-element list — i.e. one external slot. That covers all single-nozzle Bambu printers (P1P, P1S, A1, A1 mini, X1C, X1E) plus dual-nozzle models that use a single external feed (X2D). **Not affected** by this change: H2D / H2C / H2S, which expose two external slots and go through a separate `len(vt_tray) > 1` branch. That branch is preserved at its existing `mqtt_tray_id = 0` encoding because the captured exchange did not cover it; if the same misencoding turns out to affect dual-external too, a Studio → H2D capture will surface the right values and a follow-up patch will land. **Known asymmetry not touched in this PR:** the inline `ams_filament_setting` built by `_probe_developer_mode` (`bambu_mqtt.py:2971-2985`) still hardcodes `tray_id=0`. The probe is robust to this — its detection logic only matches `reason: "verify failed"` so it correctly identifies dev-mode regardless of whether the command itself succeeds — but the two builders should be unified in a follow-up. **Tests:** 5 new tests in `backend/tests/unit/services/test_bambu_mqtt.py::TestAmsFilamentSettingExternalSpoolEncoding` pin the X1C/P1S/A1 single-external fix, `reset_ams_slot` symmetry, regular AMS slot encoding unchanged, AMS-HT slot encoding unchanged, and the explicitly-unverified dual-external encoding (so any future change to the dual branch surfaces in diff review).

- **Scan For Timelapse matched the wrong video when an older print's filename happened to land near a later archive's completion** ([#1278](https://github.com/maziggy/bambuddy/issues/1278), reported by @1000Delta) — Repro: P2S in LAN-Only mode (no NTP, so printer clock is drifted +8h from UTC), two prints on the same day. Archive 1 correctly attached `video_2026-05-08_09-41-29.mp4`. Archive 2 (started at 16:39:09 UTC, expected `video_2026-05-09_00-42-42.mp4`) reused Archive 1's video with a misleading `diff: 0:02:19`. **Cause:** `scan_timelapse`'s Strategy 2 matcher in `backend/app/api/routes/archives.py` had two compounding flaws. (1) It compared the filename timestamp against both `archive.started_at` **and** `archive.completed_at` with a 48 h tolerance — but the filename always represents the print's START time, never its end, so the end-time branch was a semantic mistake whose only effect was creating false positives. For Archive 2, the stale filename `09:41:29` shifted by hypothesis offset `-8h` → `17:41:29`, which happened to fall ~2 minutes before Archive 2's completion → "diff" 2m19s won. (2) The matcher tried seven hypothesised offsets `[0, ±1, ±7, ±8]`, which densely covers a wide span of the day. Even with the end-time branch removed, the wrong video at offset `-7` lands at `16:41:29` → 2m20s from Archive 2's start, beating the correct video's 3m33s at offset `+8`. **Fix:** extracted Strategy 2 into a pure `_match_timelapse_by_timestamp(video_files, archive_start)` helper that (a) only compares against print **start** time (end-time evidence is handled separately by Strategy 3 via file mtime, which actually does reflect when writing finished), and (b) requires the best (video, offset) pair to beat the next-best pair from a *different* video by at least 15 minutes. When the top two candidates from different videos are too close to call, the helper returns `None` so the route surfaces the existing `available_files` list and the frontend's manual-selection dialog kicks in — which is the fallback the reporter explicitly asked for ("at a minimum, we should support that can fall back to letting the user manually select"). Wide offset support is preserved so EU / JST / AEST users (offsets +1, +7, +9, +10, etc.) still get auto-match when there's no ambiguity. **Tests:** 17 new tests in `backend/tests/unit/test_timelapse_match.py` pin the bug case (`test_issue_1278_archive2_refuses_to_auto_pick_ambiguous`, `test_issue_1278_archive1_still_matches_unambiguously`), the resolution path once the stale video is cleaned up (`test_archive2_resolves_when_stale_video_removed`), each of the 7 supported offsets via parametrize, and the supporting invariants (no `started_at` → `None`, non-timestamp filenames are skipped, same-video different-offset is not ambiguous, well-separated different videos still auto-pick). **Known UX gap not in this PR:** if the matcher auto-picks a wrong match, the user must delete the attached timelapse first before re-scanning — `scan_timelapse` short-circuits with `status: "exists"` when `timelapse_path` is already set. Adding a force-rescan or "wrong match, pick from candidates" affordance is a separate change.

- **Docker image: pip upgraded to >=26.1 to close CVE-2026-6357 (medium)** — The `python:3.13-slim-trixie` base image ships pip 26.0.1, which runs its self-update check *after* installing wheels. A hostile wheel that included a module named like a deferred stdlib import (`urllib`, `ssl`, …) could therefore hijack imports inside the just-finished install step. The exploit path is theoretical for Bambuddy itself — we don't install user-supplied wheels at runtime — but the vulnerable pip version still ships inside the image, GitHub code-scanning flagged it (alert #778), and any downstream user who `pip install`s into the running container inherits the issue. **Fix:** Dockerfile now runs `pip install --upgrade 'pip>=26.1'` immediately before `pip install -r requirements.txt`, so the requirements install itself happens under the patched pip and the resulting `pip-*.dist-info/METADATA` Trivy reads from the layer is the fixed version. No `requirements.txt` change — the floor is enforced at the image-build layer where the vulnerable copy lived. (libexpat1 alert #795 also flagged by code-scanning is a DoS-only XML attribute-collision CVE with no patched Debian trixie package yet — left open as a tracking signal; next base-image rebuild after trixie ships libexpat 2.8.1 will close it automatically.)

- **Gitea backups silently failed after the first run; Forgejo v15 token-scope quirk broke "Test Connection"; many failure paths surfaced cryptic one-word errors** ([#1224](https://github.com/maziggy/bambuddy/issues/1224) reported by @rtadams89, [#1239](https://github.com/maziggy/bambuddy/issues/1239) + [PR #1255](https://github.com/maziggy/bambuddy/pull/1255) by @BurntOutHylian) — Two intertwined problem clusters on the Git-backup path, fixed as one PR. **(1) Gitea backups quietly stopped after run #1.** The Git backup service used GitHub's Git Data API (`POST /git/blobs` → `/trees` → `/commits` → `PATCH /refs`) for every push. Gitea does not implement these write endpoints on modern versions, so every blob POST returned 404; the loop's `continue`-on-non-201 pattern left the change list empty and the route returned `{"status": "skipped"}` instead of committing — no toast, no log row, just "no changes" forever. The first run only worked because the empty-repo path already used the Contents API. **Fix:** `GiteaBackend.push_files` is overridden to use `POST /repos/{owner}/{repo}/contents` with a `files` array — every changed file is sent as `operation: "update"` (with its current blob SHA) or `operation: "create"`, the whole batch commits in a single round-trip, no partial-commit failure mode possible. `_create_branch_and_push` switched from the unimplemented `POST /git/refs` to `POST /branches` with `{new_branch_name, old_ref_name}`. **(2) Forgejo v15+ returns 404 (not 403) for private repos when the token lacks repository scope**, indistinguishable on the wire from "repo not found / token typo" — Test Connection's existing 404 branch said "Repository not found", which sent users chasing the wrong cause. **Fix:** new `ForgejoBackend` (inherits `GiteaBackend`) overrides `test_connection` to GET `/user` first; 401 = bad token, 403 = zero-scope token ("read:user scope missing"), 404 on the subsequent `/repos/` call surfaces the v15-specific "private repo with scope mismatch" hint instead of the generic message. **Hardening pass on the broader backup stack** (B18–B26 review round): every `response.json()[...]` indexing in `github.py` (9 sites: ref/commit/blob/tree/commit/ref across `push_files` + `_create_branch_and_push` + `_create_initial_commit`) now routes through a new `base.py::_read_sha(response, *path)` helper that returns `(sha, error_reason)` — a malformed body no longer bubbles `KeyError('object')` through the catch-all to surface as the cryptic one-word string `"'object'"` in `last_backup_message`. Tree-fetch failures (GitHub side, mirroring the Gitea side) now return `failed` with status code + truncated body instead of letting `existing_files` silently stay empty (which forced every file to re-upload and produced a downstream 422 with no hint at the real cause). GitHub's `_create_branch_and_push` failure message includes the HTTP status code (an empty-body 422 now produces a diagnostic message instead of `"Failed to create branch: "`). Both backends detect `truncated: true` on the tree-listing response (GitHub's tree API truncates at >7MB / >100k entries) and fail loudly asking the operator to rotate the backup repo — previously a truncated listing made the SHA-equality dedup miss and silently re-uploaded every file each run. `test_connection` failure messages now include `str(e)[:200]` alongside the exception class name, so the UI surfaces `"Connection failed: ConnectError: certificate verify failed: hostname mismatch"` instead of just `"ConnectError"`. Gitea's 409-on-`/contents` message was softened from "stale blob SHAs" (one possible cause) to "the branch likely advanced concurrently (web-UI edit, another backup run, or path-vs-tree collision)". Every status-code branch in `github.py` and `gitea.py` mid-push now emits a `logger.warning` with owner/repo context (previously only the outer `except` logged, so a 403/404/422 left a DB row with no application-log entry). Recursive `push_files` re-entry after branch create now logs `"Re-entering push_files after branch create owner/repo -> branch"` at info level so replication-lag second-pass failures are debuggable. **Tests:** +17 new unit tests in `test_git_providers.py` covering the GitHub robustness paths (tree-fetch failure, truncated tree, malformed JSON for ref/commit/blob, 403/422 on `_create_branch_and_push`), the Gitea round-2 hardening (truncated tree, status code in `get_current_commit` / `extract_tree_SHA` / `get_repo_info` failures, log marker emission), and the Forgejo connection-failure detail. Existing 86 → 103 tests, all pass; full backend suite + integration backup tests green; ruff clean. Tested by @BurntOutHylian against Gitea 1.24.7 / 1.25.4 / 1.26.1 and Forgejo v11 / v15 LTS. Companion wiki update at [maziggy/bambuddy-wiki#28](https://github.com/maziggy/bambuddy-wiki/pull/28).

- **Printer card's "Show on Printer Card" smart-plug button toggled power without confirmation** ([#1260](https://github.com/maziggy/bambuddy/issues/1260), reported by @thkl) — Smart plugs with the "Show on Printer Card" option enabled appear as a clickable chip in the printer card's HA-entities row (below the main Smart Plug controls). One click cut power to the printer instantly — including mid-print — even though the main Off button next to it already routes through a `ConfirmModal` and shows an additional running-print warning. **Fix:** the HA-row click handler in `frontend/src/pages/PrintersPage.tsx` now branches on entity type — `script.*` entities keep firing instantly (a script is a fire-once trigger, not a power switch, and the existing semantic of "Run" matches user expectation), but switch/light/anything-else entities now open a new `ConfirmModal` first. The modal reuses the same `variant="danger"` + running-print warning shape as the existing power-off confirmation: when `status?.state === 'RUNNING'` it shows the "WARNING: <printer> is currently printing! Toggling <entity> may cut power and interrupt the print" copy, and renders the default-variant "Toggle the Home Assistant entity <entity>?" message otherwise. The entity name comes from `ha_entity_id` (with `name` fallback) so the modal disambiguates which of multiple plugs the click was on. **i18n:** new `printers.confirm.{haToggleTitle, haToggleMessage, haToggleWarning, haToggleButton}` keys added across all 8 locales (en + de + fr + it + ja + pt-BR + zh-CN + zh-TW translated to native, no English-fallback seeding). Full PrintersPage frontend suite (49 tests) still passes; build clean.

- **X2D / H2D dual-nozzle without AMS: filament mapping reported "Required filament type not found in printer" even when the spools were physically loaded** ([#1257](https://github.com/maziggy/bambuddy/issues/1257)) — Repro: X2D with 0 AMS units, two external spools (Ext-L feeding left extruder, Ext-R feeding right), print job specifies `nozzle_id` per filament. The Schedule Print modal showed the orange "Filament Mapping (Type not found)" header and a forced manual slot picker, even though the matching PETG was sitting right there in the external spool holder. **Cause:** `frontend/src/hooks/useFilamentMapping.ts:18-19` derived dual-nozzle status solely from `printerStatus.ams_extruder_map` being non-empty. That map is populated from AMS units' info bits, so a dual-nozzle printer with zero AMS units gets an empty map → `hasDualNozzle = false` → external spools' `extruderId` falls through to `undefined` (line 64 ternary fallback). The downstream nozzle-aware filter at lines 117 / 377 (`available.filter((f) => f.extruderId === req.nozzle_id)`) then rejected every loaded filament because `undefined !== 0/1` for any non-null `nozzle_id`. The PETG was loaded, just incorrectly stripped from the candidate set during matching. **Fix:** widen the dual-nozzle inference to three independent signals OR'd together: (1) `nozzles[1].nozzle_diameter` populated — the most direct signal, set by `bambu_mqtt.py:2619-2621` only when the printer reports a `right_nozzle_diameter` MQTT field, so a populated value always implies real second-nozzle hardware; (2) `ams_extruder_map` non-empty — preserved as fallback for the dual-nozzle-with-AMS case the original code already handled; (3) `vt_tray.length > 1` — single-nozzle printers (P1S / A1 / X1C) only have one external feed, so multiple external trays only exist on dual-nozzle hardware. The first signal alone is *not* sufficient because the backend `state.nozzles` defaults to a 2-entry list with empty `NozzleInfo()` stubs (`bambu_mqtt.py:160`) on every printer, single-nozzle included — `nozzles.length` would always be 2 on the wire and would have regressed every single-nozzle install. Affects all dual-nozzle printers running without AMS: X2D, H2D, X2 Pro. **Tests:** two new regressions in `src/__tests__/hooks/useFilamentMapping.test.ts`. `matches external spools per-extruder on dual-nozzle without AMS` pins the bug fix — asserts each external spool gets the correct `extruderId` (1 for Ext-L id=254, 0 for Ext-R id=255) and `computeAmsMapping` picks Ext-L for a left-nozzle requirement. `does not fabricate extruderId for single-nozzle with stub nozzles[1]` is the matching guard — asserts that a P1S / A1 / X1C-shape PrinterStatus (with the default-stub second nozzle entry the backend always emits) does NOT trip the dual-nozzle inference, so single-nozzle external spools keep `extruderId=undefined` exactly as they did pre-fix. Together they pin both directions: a future change that re-breaks the X2D path fails CI, and one that mistakenly turns single-nozzle printers into dual-nozzle also fails CI. Full frontend suite (1891 tests across 138 files) green.

- **GCode Viewer had no in-app way to navigate back — the only exit was the browser's back button** — Opening the GCode Viewer from a File Manager card or an Archive card calls `navigate('/gcode-viewer?archive=…' | '?library_file=…')`, which mounts `GCodeViewerPage` as a full-height iframe inside the Layout shell. The page rendered nothing but the iframe, so once the third-party viewer's UI took over the content area there was no in-app affordance to return to the originating list — only the browser's back button. Reported by @maziggy. **Fix:** added a thin back bar above the iframe in `frontend/src/pages/GCodeViewerPage.tsx` with an `ArrowLeft` icon button. The button label adapts to the entry point — `Back to Print Archives` when the URL carries `?archive=`, `Back to File Manager` when it carries `?library_file=`, generic `Back` otherwise (covers the rare deep-link / shared-URL case). Click prefers `navigate(-1)` so the user lands back in their original list with scroll position and filters preserved; falls back to `/archives` or `/files` when the page was opened in a fresh tab and there's no SPA history to return to. Iframe height is now `flex: 1` inside a flex column under the bar instead of a hard-coded `calc(100vh - 3.5rem)` — the layout's existing fixed-header offset is unchanged, only the back bar (~36 px) is subtracted from the viewer's vertical real estate. **i18n:** new `gcodeViewer.{back,backToArchives,backToFiles}` namespace added to all 8 locales (en + de fully translated, fr/it/ja/pt-BR/zh-CN/zh-TW translated to native using each locale's existing page-title vocabulary — `Druckarchiv`/`Dateimanager`, `Archives d'impression`/`Gestionnaire de fichiers`, `Archivi di stampa`/`Gestore file`, `印刷アーカイブ`/`ファイル管理`, `Arquivos de impressão`/`Gerenciador de arquivos`, `打印归档`/`文件管理器`, `列印歸檔`/`檔案管理器`).
- **Archives card's "Reprint" / "Schedule" / "Slice" button labels truncated to "Re..." / "Sc..." on narrow browser windows** ([#1249](https://github.com/maziggy/bambuddy/issues/1249)) — The action row on each archive card has six buttons: two labelled (Reprint + Schedule, or Slice when the file isn't sliced yet) plus four icon-only utilities (open in slicer, external link, globe, download, trash). The labelled buttons used `flex-1` to share whatever space remained after the four fixed-width icon buttons, with the label rendered as `<span className="hidden sm:inline truncate">...</span>` — i.e. visible at any viewport ≥ 640px, with `truncate` ellipsizing when there isn't room. **The Tailwind viewport breakpoint can't see the card width.** The page's grid grows column count alongside viewport (`md:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4`), so cards stay roughly 320–380 px wide across breakpoints and the leftover ~30 px in each labelled button isn't enough for "Reprint", which lands on screen as "Re..." — repro'd from a small browser window in the reporter's case. **Fix:** breakpoint bumped from `hidden sm:inline` → `hidden xl:inline` on all three labelled buttons (Reprint at line 1106, Schedule at line 1117, Slice at line 1153 of `frontend/src/pages/ArchivesPage.tsx`). Labels now appear only at viewport ≥ 1280px where the cards (3-4 columns of ~320 px) actually have headroom for them; on narrow windows the buttons render icon-only with their existing `title=` tooltip kept intact for hover and assistive-tech disclosure. Trade-off accepted: a wide-viewport-with-wide-sidebar setup that compresses the card to under ~320px will still see the truncation, but that's a corner case — the common "small browser window" path is fixed without restructuring the row.
- **Spool form's "Slicer Preset" dropdown silently dropped Local Profiles when Bambu Cloud was connected, and collapsed per-printer/per-nozzle variants of cloud and local presets into a single entry** ([#1248](https://github.com/maziggy/bambuddy/issues/1248), reported by @andretietz) — Two distinct defects in the same code path. **Defect 1 (the reported bug):** `buildFilamentOptions` in `frontend/src/components/spool-form/utils.ts` was precedence-based — `if (cloudPresets.length > 0)` returned the cloud list and never reached the local-presets branch, so any Local Profile imported via Profiles → Local Profiles was silently invisible whenever the user was logged into Bambu Cloud (the same profile rendered fine with a green `Local` badge in the AMS Slot configuration modal). The wiki documents the dropdown as "merged and deduplicated" across cloud + local + built-in. **Defect 2 (surfaced during fix verification):** the spool form was collapsing all `@Bambu Lab P1S 0.4 nozzle` / `@Bambu Lab X1C 0.4 nozzle` / `@Bambu Lab A1 0.4 nozzle` variants of "Bambu PLA Basic" into a single dropdown entry by stripping the `@printer` suffix and dedup'ing by base name (one Map.set per family for cloud defaults, one per family for local presets). The AMS Slot modal lists each variant individually and filters by the active printer model, so the user observed strictly more entries in the AMS Slot than in the Add Spool modal even after the merge fix. The right semantic for the spool form — printer-agnostic by design, since a spool isn't bound to a printer — is to show every variant as its own row, exactly as if you'd summed the AMS Slot's per-printer-filtered output across all printers. **Fix:** rewrote `buildFilamentOptions` to (a) actually merge all three sources, dropping the precedence early-return, and (b) push each cloud `setting_id` and each `LocalPreset` row as its own `FilamentOption` instead of collapsing by `name.replace(/@.*$/, '')`. `displayName` now keeps the full `@printer 0.4 nozzle` suffix so users can pick the right variant. Built-in dedup against cloud setting_id is preserved (mirrors `ConfigureAmsSlotModal.tsx:498` exactly). Wired `api.getBuiltinFilaments()` into both callers — `SpoolFormModal` and `SpoolBuddyWriteTagPage`. **Persistence safety:** the saved `slicer_filament` shape is unchanged — cloud picks still persist their `setting_id`, local picks still persist `preset.filament_type || String(preset.id)` (consumed by `backend/app/utils/filament_ids.py::normalize_slicer_filament` which expects `GFL05`/`GFSL05` shapes; persisting the bare LocalPreset row id would break slicing). Local-preset `allCodes` now carries both the `filament_type` form and the `String(preset.id)` form so `findPresetOption` resolves both old (pre-fix) and new picks. **React-key collision:** with collapse removed, two LocalPreset rows can share the same `code` if they share `filament_type`; the dropdown key in `FilamentSection.tsx` is now composed `${option.code}::${option.name}` to stay unique. **Tests:** new `frontend/src/__tests__/components/spool-form/buildFilamentOptions.test.ts` with 9 cases — the #1248 regression case, "one entry per cloud setting_id, no @printer collapse", "list each local preset individually", "@printer suffix preserved in displayName", local `allCodes` carrying both shapes, the `GFA00`↔`GFSA00` built-in dedup, the all-empty fallback, and the alphabetical sort. The two existing `vi.mock('../../api/client')` blocks in `SpoolFormModal.test.tsx` and `SpoolFormBulk.test.tsx` were updated with the new `getBuiltinFilaments` stub.
- **SpoolBuddy install.sh re-run failed with `Permission denied` on root-owned files in update mode** — `download_spoolbuddy()` ran `git fetch + git checkout + git reset --hard` *before* the post-install chown at the end of the function. If a previous install left stray root-owned files in the tree (e.g. `static/assets/*` written by an earlier `sudo` run, or a frontend build that wrote as root), the `git reset --hard` step aborted with EACCES on the unlink/replace step before reaching the chown. The script then exited and the kiosk's underlying ownership problem persisted, so the next attempt would fail the same way. **Fix:** pre-emptively `chown -R spoolbuddy:spoolbuddy "$INSTALL_PATH"` in the update branch *before* any git operation runs. The script already runs as root (enforced by `check_root`), so the chown is always safe. The existing post-install chown at the end stays — it now mostly catches new files created during this run that need their ownership normalised. Same root cause showed up on the kiosk's *runtime* SSH update path (Bambuddy → kiosk: `git checkout dev && git reset --hard origin/dev` running as the `spoolbuddy` user) but that path can't `chown` without sudoers expansion — the install.sh fix is the immediate recovery, and re-running the install script restores a clean ownership baseline that the runtime updater can keep healthy thereafter.
- **SpoolBuddy SSH update aborted with `TypeError: startswith first arg must be bytes or a tuple of bytes, not str` after the host-key store succeeded** — `perform_ssh_update` calls `asyncssh.import_known_hosts(...)` to materialise an `SSHKnownHosts` object for `_run_ssh_command`'s `known_hosts=` keyword arg. Both call sites (the stored-key path at line 221 and the just-stored TOFU re-parse at line 272) passed `f"{ip} {key}\n".encode()` — i.e. `bytes`. asyncssh's parser does line-based string operations (`line.startswith('#')` with a `str` literal), so any `bytes` input crashes inside its loader with `TypeError`. The two `try`/`except` clauses caught only `(ValueError, asyncssh.Error)`, missing `TypeError`, so the crash bubbled up and aborted the whole update right after the schema fix successfully persisted the host key. **Fix:** drop the `.encode()` at both call sites — pass the str directly. Widened both except clauses to `(ValueError, TypeError, asyncssh.Error)` so any future asyncssh API surprise degrades to the existing fallback (TOFU mode without host-key verification, with a logger.warning) instead of crashing the update. Existing SSH tests all mocked `asyncssh.import_known_hosts` itself so they never reached the parser — added `test_perform_ssh_update_passes_str_not_bytes_to_import_known_hosts` to capture both call sites' arguments and assert `isinstance(arg, str)` so re-introducing `.encode()` fails CI immediately.
- **SpoolBuddy SSH update crashed on Postgres with `value too long for type character varying(500)` when storing the device's RSA host key** — `spoolbuddy_devices.ssh_host_key` was declared as `String(500)`, which is fine for SQLite (ignores VARCHAR length) and for ed25519 host keys (~120 chars), but RSA host keys in OpenSSH format are typically 370 chars (2048-bit) → 544 chars (3072-bit) → ~720 chars (4096-bit). Postgres enforces the limit strictly, so any kiosk reporting an RSA-3072 or larger host key on the first SSH update aborted at the `UPDATE spoolbuddy_devices SET ssh_host_key=...` flush — the `git fetch + pip install + systemctl restart` may have run successfully but the persistence of the TOFU host key failed and the device's update_status was never written. **Fix:** widened `ssh_host_key` from `String(500)` → `Text` on the model, plus an idempotent `ALTER TABLE spoolbuddy_devices ALTER COLUMN ssh_host_key TYPE TEXT` migration gated on `not is_sqlite()` (Postgres-only; SQLite is a no-op since it doesn't enforce VARCHAR length). Existing rows are preserved — `TYPE TEXT` is a metadata-only change on Postgres for `VARCHAR(N)` → `TEXT` so it's a fast migration even on populated tables. Originally introduced in the H1 SSH-host-key TOFU security fix; the 500-char floor was a guess based on ed25519 sizes that the RSA case immediately blew past.
- **SpoolBuddy kiosk Settings → Update button returned "API keys cannot be used for administrative operations"** — Same root cause as the four QuickMenu System buttons fixed in 0.2.4b3 (Restart Daemon / Restart Browser / Reboot / Shutdown), missed in that audit. The `POST /spoolbuddy/devices/{id}/update` route (kiosk's own Settings → Update Daemon button → SSH update on the kiosk device) was gated on `Permission.SETTINGS_UPDATE`, but `SETTINGS_UPDATE` is on the API-key deny-list (`_APIKEY_DENIED_PERMISSIONS` in `backend/app/core/auth.py`, introduced in PR #1241). Every kiosk-side request to update the daemon — regardless of the API key's scope set (Read / Print Queue / Control / Legacy) — tripped the deny-list and returned a hard 403 with that message. **The 0.2.4b3 fix explicitly carved /update out** with the reasoning "replaces the daemon binary, different threat surface" — but that reasoning was wrong: `restart_daemon` already replaces the running daemon process, so daemon-replacement is *not* a step up in blast radius. The SSH update is also strictly scoped to the single device the operator physically controls (`git fetch + pip install + systemctl restart` on that one host) — same threat profile as the system commands already running on `INVENTORY_UPDATE`. **Fix:** lower `/spoolbuddy/devices/{id}/update` from `Permission.SETTINGS_UPDATE` → `Permission.INVENTORY_UPDATE`, matching the rest of the kiosk-scoped routes (`calibration/tare`, `display`, `cancel-write`, `system/command`, `system/command-result`, `update-status`). The main Bambuddy in-app updater at `POST /api/v1/updates/apply` keeps `SETTINGS_UPDATE` — that one operates on the Bambuddy host and is correctly fenced behind the deny-list. **Tests:** `test_trigger_update_requires_settings_update` (which pinned the broken behavior — 403 on inventory-only key) is renamed to `test_trigger_update_accepts_inventory_update` and now asserts the inventory-only key reaches the device-state check (409 offline) instead of 403, so a future re-tightening of the gate surfaces immediately. Class-level docstring in `test_settings_api_key_scrubbing.py` updated to reflect the corrected threat-model reasoning.
- **Printer file download 500'd on non-ASCII filenames; same crash latent in three sibling endpoints** ([#1245](https://github.com/maziggy/bambuddy/issues/1245), reported by @1000Delta) — `GET /api/v1/printers/{id}/files/download?path=...` raised `UnicodeEncodeError: 'latin-1' codec can't encode characters in position …` for any path whose filename carried non-ASCII characters (Chinese, Japanese, Arabic, accented Latin), reproducible against P2S firmware on macOS but not target-specific. **Cause:** the route shoved `filename` straight into `Content-Disposition: attachment; filename="{filename}"` — Starlette/uvicorn encodes response headers as latin-1, so anything outside U+0000..U+00FF crashed at write-time. Same pattern existed in three sibling endpoints reachable with user-controlled non-ASCII input: `GET /archives/{id}/qr` (uses `archive.print_name` from 3MF metadata, often non-ASCII), `GET /projects/{id}/export` (uses `project.name` — the existing sanitiser at `projects.py:1648` uses `c.isalnum()` which **passes non-ASCII Unicode through**, so the crash propagated), and `_stream_pdf` in `labels.py` (latent — current callers pass ASCII-only template names, but the same shape would crash if a future caller passed user input). **Fix:** new helper `backend/app/utils/http.py::build_content_disposition(filename, disposition="attachment")` returns an RFC 6266-compliant header with both an ASCII-stripped legacy `filename="..."` fallback and an RFC 5987 `filename*=UTF-8''<percent-encoded>` parameter — every modern browser (Chrome / Firefox / Safari / Edge) prefers the `*=` form when present, so the original filename round-trips intact through Save-As; the ASCII fallback covers IE10-era clients. Helper wired in at all four call sites in one PR (per project rule: no deferred follow-ups). **Tests:** 20 unit tests in `test_http_utils.py` pinning ASCII-fallback rules across plain ASCII / Chinese / Japanese / Arabic / French diacritics / `.gcode.3mf` double-extension / quote-injection / backslash-injection / empty-string and `___.zip` edge cases, asserting the helper's output round-trips through latin-1 (the crash condition) for every test input. 6 new integration tests in `test_printers_api.py::TestPrintersAPI::test_download_printer_file_non_ascii_filename` parametrized over the same character classes (the original `龙泡泡石墩子_p2s_ok.gcode.3mf` case from #1245 is included) — each asserts the route returns 200 with an unmangled body, the ASCII fallback in the header matches expectations, and `unquote(filename*=)` round-trips back to the original Unicode filename. Thanks to @1000Delta for the diagnosis and the proof-of-concept patch on `printers.py` — the broader audit (three sibling endpoints, helper extraction, latin-1 round-trip assertions) was done on top of that.

## [0.2.4b3] - 2026-05-08

### Added
- **Slicer Bundle (.bbscfg) import — pick presets from a stored bundle instead of resolving cloud/local/standard PresetRefs every slice** — Closes the long tail of preset-resolution corner cases (cloud presets behind login, "from User" sentinel handling, the `# `-prefix clone trick, dangling `inherits` on renamed parents, etc.) by letting users upload a BambuStudio "Printer Preset Bundle" (`.bbscfg`) once per printer and pick from it for every subsequent slice. **Service layer (`backend/app/services/slicer_api.py`):** `BundleSummary` / `BundleNotFoundError` types, `import_bundle` / `list_bundles` / `get_bundle` / `delete_bundle` methods, `slice_with_bundle` which posts `/slice` with bundle id + per-category preset names instead of the JSON triplet. **Routes (`/api/v1/slicer/bundles`, all gated on `Permission.LIBRARY_UPLOAD`):** `POST` / `GET` / `GET :id` / `DELETE :id`. All routes proxy via `_resolve_slicer_api_url` so they follow the user's `preferred_slicer` setting (bambu_studio vs orcaslicer). Status-code mapping treats sidecar 4xx as 400, `BundleNotFoundError` as 404, sidecar unreachable as 503, and sidecar 5xx as 502. **Preview-slice (`backend/app/services/slice_preview.py::get_preview_filaments`)** picks up optional `bundle_id` + `printer_name` + `process_name` + `filament_names` params and routes through `slice_with_bundle` when set; the cache key picks up a bundle-context fingerprint so different bundle picks on the same file occupy distinct entries — gram numbers in the preview now match what the real print will produce instead of being derived from the file's embedded process settings (which can drift from the triplet the actual slice would use). The `library.py` and `archives.py` `/filament-requirements` routes forward the new params. **Dispatch (`SliceRequest.bundle: SliceBundleSpec`):** when set, `_run_slicer_with_fallback` skips `resolve_preset_ref` and calls `slice_with_bundle`; the validator skips the preset-required check so bundle-only requests validate. 3MF + bundle CLI 5xx still falls back to the embedded-settings slice path (`used_embedded_settings=True` surfaces in the response), and sidecar 404 (unknown bundle / preset name) maps to 400. **Frontend SliceModal Bundle tier:** new "Slicer bundle" picker at the top of the modal, rendered only when at least one bundle is imported (`GET /slicer/bundles` non-empty). Selecting a bundle replaces cloud / local / standard preset dropdowns with bundle-scoped pickers (process + per-slot filament names from the bundle) — printer is implicit (each `.bbscfg` has exactly one). "None" leaves the modal on the original preset-triplet path. Submit routes through `SliceRequest.bundle` so the backend skips PresetRef resolution and asks the sidecar to materialise the JSON triplet from the stored bundle by name. **Frontend types:** `SliceBundleSpec` + `bundle?: SliceBundleSpec` on `SliceRequest`; `getLibraryFileFilamentRequirements` / `getArchiveFilamentRequirements` accept an optional 4th-arg bundle context object. The orca-slicer-api fork's bundle endpoints (shipped on `bambuddy/bundle-import`) are the server side of this — see the slicer-api sidecar docker-compose for the matching versions.

### Fixed
- **SpoolBuddy with Spoolman enabled: NFC tag scan looked up local DB first, ignored Spoolman setting; "Assign to AMS" did nothing on freshly-linked spools; AMS slot picker hid the assigned spool's info and unassign action; LinkSpoolModal showed "Unknown color" for every Spoolman spool; tag-write didn't enforce uniqueness so the wrong spool resolved on scan; kiosk display held stale assigned-state forever** — Several intertwined bugs surfaced during `feature/spoolman-inventory-ui` testing; fixing them as one batch because they all live on the SpoolBuddy + Spoolman path. **(1) `/spoolbuddy/nfc/tag-scanned` always tried local DB first** and only consulted Spoolman as a fallback on local-DB miss, so a stale local copy of a tag silently won over the authoritative Spoolman row, and deleting the local copy was the only way to surface the Spoolman match. Now the route gates on `_get_spoolman_client_or_none(db)` (which already encodes the `spoolman_enabled` setting + SSRF guard) and routes to whichever inventory backend Bambuddy is configured for — Spoolman exclusive when enabled, local exclusive otherwise. **(2) Dashboard "Assign to AMS" button was a no-op** when the freshly-matched spool wasn't yet in the cached `getSpoolmanInventorySpools` query result (newly created or unarchived in Spoolman after the dashboard loaded). The card rendered via its own `displayedSpool ?? sbState.matchedSpool` fallback, but the modal's stricter `displayedSpool && !justLinkedSpool && displayedTagId` guard silently failed to mount. New `effectiveModalSpool` synthesises an `InventorySpool`-shaped object from the WebSocket-delivered `MatchedSpool` (a 9-field subset; `slicer_filament*` are absent but the modal only uses `id` to route the assign API call and the mismatch check yields `'none'` for profile in either case). **(3) AMS-page slot picker hid the assigned spool entirely** — when a slot had a `SpoolmanSlotAssignment` (assigned via the dashboard's Assign-to-AMS flow) but no tag-linked spool, the picker explicitly returned `null` for the assign/unassign branch and only the "Configure" button remained visible. Now the picker resolves the assignment from `spoolmanSlotAssignmentsAll + spoolmanInventorySpoolsCache`, renders a "Assigned spool: brand · material - color" info card, and exposes an Unassign button wired to a new `unassignSpoolmanSlotMutation` (calls `DELETE /spoolman/inventory/slot-assignments/<id>`, mirroring the local-mode flow). **(4) `LinkSpoolModal` showed "Unknown color" for every Spoolman spool** because Spoolman doesn't standardise `color_name` — most installs only populate `color_hex` and the filament's `name` (which often carries the colour like "PLA Basic Red"). `_map_spoolman_spool` now falls back to the filament's subtype (filament name minus material prefix — typically "Basic Red") when `color_name` is empty, so spools are visually distinguishable in the picker without changes to the frontend. **(5) Writing a tag for spool B didn't clear the same tag binding from spool A**, so a single physical NFC UID could map to two Spoolman spools at once and `find_spool_by_tag` returned whichever came first in the cached list (typically the older one) — exactly the symptom maziggy hit during testing where re-writing a tag still surfaced the previously-assigned spool. `nfc_write_result` now searches Spoolman for any other spool currently bound to the target UID and clears its `extra.tag` (best-effort: cleanup failure logs a warning but doesn't block the write itself, since the device already wrote the chip). **(6) The kiosk display held stale `spoolmanSlotAssignments` cache** because the SpoolBuddy display is a long-running browser window with no focus/remount triggers, so a `staleTime` alone never caused a refetch. State changed elsewhere (Bambuddy main UI, direct Spoolman edit) was invisible to the kiosk and `isSpoolAssigned` reported assigned-forever — the Assign button stayed disabled, the Unassign button stayed enabled, after the spools were already unassigned. Adds `refetchInterval: 3_000` (cheap query, bounded latency below operator-noticeable) so the kiosk picks up external changes within seconds. **(7) Kiosk QuickMenu System buttons (Restart Daemon / Restart Browser / Reboot / Shutdown) all 403'd silently** — the `/spoolbuddy/devices/<id>/system/command` route was gated on `Permission.SETTINGS_UPDATE` (T-Gap 2 from a prior security audit), but every other kiosk-scoped device route (`calibration/tare`, `display`, `cancel-write`, `system/command-result`) uses `INVENTORY_UPDATE`. The kiosk's operator session has `INVENTORY_UPDATE` but not `SETTINGS_UPDATE`, so every System button silently failed via the modal's catch-block (no toast). Aligned the permission with the rest of the kiosk-scoped routes so operators can recover the kiosk from the kiosk itself. Risk is bounded — only the 4 named commands are accepted (no RCE), reboot/shutdown require physical-access recovery, the same operator already controls printers + weighs spools on the same device. The `/update` route keeps `SETTINGS_UPDATE` because that one can replace the daemon binary, which is a different threat surface. Test contract `test_system_command_requires_settings_update` is renamed to `test_system_command_accepts_inventory_update` and asserts the inventory-only key now reaches the device-state check (409 offline) instead of 403, so a future re-tightening of the gate surfaces immediately. **Tests:** new `TestMapSpoolmanSpool::test_color_name_uses_explicit_field_when_present` / `_falls_back_to_subtype_when_field_missing` / `_none_when_both_fields_empty` (3 unit tests pinning the colour-name fallback chain), new `TestNfcEndpoints::test_tag_scanned_spoolman_mode_skips_local_lookup` (verifies `get_spool_by_tag` is never called when Spoolman is enabled, even when the lookup would have returned a spool), and new `test_write_result_clears_duplicate_tag_binding` (asserts `merge_spool_extra` is called twice — once to clear the old holder's `extra.tag`, once to bind the new owner — in that order with the right spool ids). Existing 76 helper tests + 7 NFC-endpoint tests still pass.
- **Spool assignment to a reset AMS slot left the slot unconfigured both in Bambuddy and on the printer** — Reproduced during `feature/spoolman-inventory-ui` testing (extends the #1228 family). After clicking "Reset slot" on an AMS slot that had filament physically loaded, picking an inventory spool from the printer card and clicking Assign showed a success toast — but the slot kept reporting as unconfigured, no `ams_filament_setting` MQTT command ever fired, and the spool's brand/color never appeared on either the Bambuddy printer card or BambuStudio. **Cause:** `assign_spool` in `backend/app/api/routes/inventory.py` decided the slot was empty using `slot_is_empty = not (fingerprint_type and fingerprint_type.strip())` where `fingerprint_type` came from `tray.tray_type`. The "Reset slot" command clears `tray_type` / `tray_color` / `tray_info_idx` to empty strings on the printer side but leaves the filament physically loaded. The empty `tray_type` then misled the heuristic into the pending-config (SpoolBuddy weigh-then-assign) branch, which intentionally skips the MQTT publish because Bambu firmware drops `ams_filament_setting` on truly unloaded slots. The deferred replay in `on_ams_change` only fires on an empty→loaded transition — but the slot was already loaded, so no transition ever came and the assignment sat in pending state forever. **Fix:** capture `tray.state` alongside the fingerprint fields when looking up the AMS tray (Bambu firmware reports `state == 11` for loaded, `9` for empty, `10` for spool present but filament not in feeder; documented at `bambu_mqtt.py:1631-1633`). When `state` is reported, `slot_is_empty = (state != 11)`. When `state` is not reported (older firmware), fall back to the existing `tray_type` heuristic so legacy installs continue to behave the same. Same logic applied to the external-slot path (`ams_id == 255` / `vt_tray`). **Tests:** 5 new in `TestAssignSpoolEmptyDetection` — post-reset (`state=11, tray_type=""` → MQTT must fire, `pending_config=False`), genuinely empty (`state=9` → MQTT skipped, `pending_config=True`), legacy fallback both directions (no `state` field → tray_type heuristic), and the external-slot post-reset variant.
- **Slicer "Send to printer" silently rejected the cached push_status with "storage needs to be inserted" on P1S/A1-class targets** ([#1228](https://github.com/maziggy/bambuddy/issues/1228), reported by @rtadams89, also hit by @smandon) — Slicer "Send" worked on 0.2.3.2 with a queue-mode VP and started failing on 0.2.4b3, regardless of subnet topology, with BambuStudio showing the generic "storage needs to be inserted before send to printer" error. Reproducible across Docker bridge, macvlan, and LAN-attached host networking. Network reachability ruled out (slicer reaches MQTT/FTPS, FTP passive ports 50000-50100 reachable end-to-end, pfSense rules clean). The smoking gun was in @rtadams89's debug-level support archive: slicer establishes MQTT TLS to the VP, gets `pushall` + `get_version` responses, then **never opens an FTP connection** — the slicer reads the cached push, fails its pre-flight, and aborts before attempting any data transfer. **Cause:** the 0.2.3.2 synthetic stub baked three SD/storage indicators that BambuStudio's "Send" pre-flight reads — `home_flag` with bit 8 (`HAS_SDCARD_NORMAL`, `0x100`), `sdcard: True`, and a `storage: {free, total}` block. The 0.2.4b3 cached-as-base slicer-mirror (commit `7dea33d0`) passes the live target's push_status through with only an IP rewrite; if the real firmware doesn't report those fields (P1S/A1 with no SD card inserted, older field shapes, P1S firmware `01.10.00.00` confirmed in @rtadams89's logs), the slicer sees "no storage" and refuses to send. H2D and X1C in maziggy's local cross-subnet repro worked because those firmwares do report the indicators; P1S/A1-class doesn't always. **Fix:** in `mqtt_server.py:_send_status_report` cached-as-base path, after copying the cache, OR `0x100` onto `home_flag` (preserves any other bits the printer set), force `sdcard=True`, and `setdefault` a `storage: {free: 1_000_000_000, total: 32_000_000_000}` block (only fills in if the real printer didn't report one — real values pass through unchanged when present). For VP usage the slicer uploads via FTPS to Bambuddy's filesystem under `/app/data/virtual_printer/uploads/<vpid>/`; the printer's actual SD card is irrelevant on that path, so forcing "storage available" is correct for the queue/immediate/review modes the cached-as-base path covers. Restores 0.2.3.2's working behaviour for these specific fields without losing the live AMS / k-profile / camera mirror that cached-as-base provides. **Tests:** new `test_storage_indicators_overlaid_for_send_preflight` (verifies SD bit OR'd onto a partial `home_flag`, `sdcard=True` forced even when real says False, `storage` injected when cache lacks it, free/total are non-zero) and `test_storage_indicators_preserve_real_storage_when_present` (real `home_flag=0x100` stays `0x100`, real `storage={free, total}` passes through unchanged so the overlay never overrides what the printer actually reported) in `test_vp_mqtt_bridge.py::TestStatusReportCachedAsBase`. Existing 25 tests in that suite still pass.
- **MFA at-rest encryption is now default-on via auto-bootstrap** ([#1219](https://github.com/maziggy/bambuddy/issues/1219)) — Default Docker installs ran with `MFA_ENCRYPTION_KEY` unset, which silently fell back to plaintext storage for OIDC `client_secret` and TOTP secret rows. The single startup `logger.warning` was the only signal, and `.env.example` / `docker-compose.yml` / Settings UI never mentioned the variable, so any operator who wired up SSO or asked users to enroll in 2FA had to read the warning in the logs to know their secrets were unprotected at rest. **Auto-bootstrap:** `backend/app/core/encryption.py` now resolves the encryption key with the same precedence pattern as `_get_jwt_secret` — `MFA_ENCRYPTION_KEY` env var → `DATA_DIR/.mfa_encryption_key` file → auto-generated Fernet key written with mode `0o600`. The new helper `backend/app/core/paths.py:resolve_data_dir()` is shared with `auth.py` (DRY) and reads the env fresh on every call so test fixtures can override `DATA_DIR` per-test. Invalid env-var values (anything that doesn't decode to exactly 32 bytes via URL-safe base64) are rejected with a `logger.error` and the loader falls through to the file/auto-generate branches instead of crashing the encrypt/decrypt path with `ValueError`. **Re-encryption migration:** `_migrate_encrypt_legacy_secrets()` runs once on every startup after `run_migrations(conn)` finishes — it opens its own `async_session()` (separate from the schema-DDL connection, to avoid SQLite WAL lock contention) and converts any `oidc_providers.client_secret` / `user_totp.secret` row whose value doesn't already start with `fernet:` to the encrypted form via the existing property setters. The migration is idempotent (prefix check) and is a no-op when no key is loaded, so it can run safely on installs that never opt in. **Status endpoint + UI:** new `GET /api/v1/auth/encryption-status` (admin-only, gated on `Permission.SETTINGS_READ`) returns `key_configured`, `key_source ∈ {env, file, generated, none}`, plus per-table `legacy_plaintext_rows` and `encrypted_rows` counts and a derived `decryption_broken` flag (true iff encrypted rows exist but no key is loadable — the Phase-2 "operator deleted the key after rows were encrypted" recovery scenario). The new `frontend/src/components/SecurityStatusCard.tsx` lives in a new "Security" sub-tab under Settings → Authentication and renders four severity levels: green when everything is encrypted and a key is loaded, yellow when legacy plaintext rows still need re-encryption, orange when the key was auto-generated (with a backup hint pointing at `DATA_DIR/.mfa_encryption_key`), and red when `decryption_broken` is true. **Backup integration:** `routes/settings.py:create_backup_zip` now includes `.mfa_encryption_key` as a ZIP top-level entry (alongside `bambuddy.db`) so a self-contained backup can be restored to a fresh host without losing access to encrypted secrets. The matching `routes/settings.py:restore_backup` extracts the file back into `DATA_DIR` with `chmod(0o600)` and validates the basename exactly (`/`, `..`, `\\` rejected) so a manipulated ZIP cannot path-traverse outside `DATA_DIR`. If the file is absent from the ZIP (legacy backup) the restore proceeds without error — the next boot will auto-bootstrap a fresh key, and any plaintext rows that come back from the backup remain readable via the existing legacy-plaintext fallback in `mfa_decrypt`. **Test isolation:** new autouse `mfa_encryption_isolation` fixture in `conftest.py` per-test points `DATA_DIR` at a `tmp_path`, clears `MFA_ENCRYPTION_KEY` from env, and resets the `_fernet_instance` / `_warn_shown` / `_key_source` module globals — so the auto-bootstrap can never write a real key file into the repo and pytest-xdist workers don't share encryption state. **i18n:** new `settings.encryption.*` namespace and `settings.tabs.security` label across all 8 locales (en + de fully translated; fr/it/ja/pt-BR/zh-CN/zh-TW seeded with English copy pending native translation, matching the project's existing flow for newly-added keys). **Docs:** `.env.example` documents the new variable + the backup self-containment behaviour; `docker-compose.yml` carries an auto-commented entry; `.gitignore` adds `.mfa_encryption_key` alongside the existing `.jwt_secret` project-root guard. **Tests:** 9 new unit tests in `TestEncryption` (env/file/generated key sources, invalid-env fall-through, OSError → `none`, mode `0o600` check), 6 new in `TestEncryptLegacyMigration` (plaintext → encrypted for OIDC + TOTP, idempotent re-run, mixed state, no-op without key, log assertion), 8 new in `TestEncryptionStatusEndpoint` (each `key_source`, count assertions, `decryption_broken` recovery scenario, `Permission.SETTINGS_READ` gate), 2 new in `TestEncryptionRoundtrip` (raw column reads return ciphertext, property reads return plaintext for both OIDC and TOTP), 6 new in `TestBackupKeyFiles` (ZIP includes / skips key files, restore chmod `0o600`, missing-file tolerance, path-traversal rejection), and 6 new frontend tests in `SecurityStatusCard.test.tsx` (each severity level + the disabled state).
- **Camera preview popup opened to a blank page; deep-route refresh and direct URL load broken** ([#1221](https://github.com/maziggy/bambuddy/issues/1221), reported by @enjoylifenow / @Haeckan / @elit3ge / @jc21) — Clicking "open camera in new window" from the printer card opened a popup that rendered as an empty white page across P1S / P2S / X1 series, every install method (Docker / git clone), every browser (Chrome / Firefox / Brave / Safari), starting with the daily build of 2026-05-05. **Cause:** PR #1195 (`d6a31393`, "fix(frontend): emit relative asset paths so SPA loads under any subpath") set `base: ''` in `vite.config.ts` to support path-prefixed reverse proxies (HA Ingress, nginx subpath, Cloudflare Tunnel path routing). With that, the built `index.html` references its bundle and stylesheet via relative URLs (`./assets/index-XXX.js`, `./sw-register.js`). When the popup opened at `/camera/<id>`, the browser resolved `./assets/index-XXX.js` against the current document URL — which doesn't end in a slash, so the URL parser treated `<id>` as a file and `/camera/` as the directory, giving `/camera/assets/index-XXX.js`. The backend's SPA catch-all returned `index.html` (text/html) for that request, and modern browsers refuse to execute HTML as a JS module under `X-Content-Type-Options: nosniff`, so the popup loaded the document but never the bundle. Same break hit any deep route on initial load — direct URL paste / refresh on `/camera/:printerId`, `/projects/:id`, `/groups/:id/edit`, `/files/trash`, `/external/:id`, and the SpoolBuddy kiosk's `/spoolbuddy/ams` if loaded directly — manifesting as a quiet "blank page on refresh" that users worked around by navigating from the home page. The console error gives it away: `Loading module … was blocked because of a disallowed MIME type ("text/html")`. **Fix:** revert PR #1195's `vite.config.ts` and `sw-register.js` changes — `base: ''` is removed (Vite default `'/'` restored), and `navigator.serviceWorker.register('sw.js')` reverts to `register('/sw.js')`. The built `index.html` now emits absolute asset URLs (`/assets/...`, `/manifest.json`, `/sw-register.js`) which resolve against host root regardless of document URL, so deep routes load their assets correctly on initial navigation. PR #1195's class of bug — path-prefixed reverse proxy users serving Bambuddy at a subpath — was already explicitly closed as wontfix in that thread because supporting it requires subpath-aware bootstrapping (API_BASE, React Router basename, PWA manifest scope, service-worker scope, push-subscription scope) for every user forever. The supported workaround for that audience is documented: NPM (Nginx Proxy Manager) addon + Cloudflare Tunnel at a real domain with HTTPS, then HA Webpage panel embedding via `TRUSTED_FRAME_ORIGINS` — that path doesn't depend on `base: ''` at all. The trade-off here is intentional: revert reaches every user impacted by deep-route initial-load bugs (much larger population than path-prefixed proxy users), in exchange for an already-wontfixed subpath proxy regression that has a working alternative. ([#1237](https://github.com/maziggy/bambuddy/issues/1237), reported by @basziee) — In the Configure AMS Slot modal, profile names like `SUNLU PETG GLOW IN THE DARK GEN2 @Bambu Lab H2C 0.4 nozzle` were visually truncated mid-name, hiding the `@<printer> <nozzle>` suffix. With several near-identical entries differing only in nozzle size, users had to open browser dev tools to tell them apart. **Fix:** the preset row now expands inline on hover — `truncate` stays as the default (so the list keeps its compact one-line shape) but `group-hover:whitespace-normal group-hover:break-all` flips it to a wrapped multi-line view the moment the cursor enters the row, so the nozzle suffix is readable instantly without waiting on the browser's title-tooltip delay. The parent button gets `group` to drive the hover. The native `title={preset.name}` is also added as a belt-and-braces fallback for assistive tech and touch devices where `:hover` doesn't fire. Same pattern in both the desktop and mobile layouts of `ConfigureAmsSlotModal.tsx`. No new dependencies. **Test:** new `ConfigureAmsSlotModal.test.tsx` regression assertion that the rendered preset span carries `title=<full name>` plus the `truncate` and `group-hover:whitespace-normal` classes, and the parent button has `group` — so a future refactor that drops any of those fails CI.
- **Filament usage double-counted when AMS auto-falls-back to a same-material spool** ([#957](https://github.com/maziggy/bambuddy/issues/957)) — When one spool ran out mid-print and the AMS transparently switched to a sibling slot loaded with the same material, the usage tracker credited the originally-mapped spool with the full 3MF estimate AND added the fallback spool's remain%-delta on top — so a 78 g print could show as 78 g + 60 g = 138 g consumed across the two spools, leaving the empty spool's recorded weight beyond its label weight (the symptom the original report flagged on a 1209 g spool reading "1188.30 g used" while the new spool only got a 30 g credit). Two interacting bugs: (1) the tray-change recorder in `bambu_mqtt.py` gated on `state in ("RUNNING", "PAUSE")` literal strings, and P2S firmware briefly transitions out of RUNNING during the AMS swap, so the switch was never appended to `tray_change_log`; (2) the usage-tracker splitting branch in `usage_tracker.py` was gated on `not slot_to_tray`, so even when the tray-change log was populated the splitting code only ran for prints where the slicer's mapping had not been captured — i.e. never on the actual fallback case. **Fix:** the `bambu_mqtt.py` gate now keys on the print-lifecycle flags (`_was_running and not _completion_triggered`) so any tray change between print start and completion is captured regardless of the momentary `gcode_state` string. The `usage_tracker.py` gate is split so `tray_change_log` evidence with > 1 entries always takes over from `slot_to_tray`, treating the per-segment per-layer gcode usage as the source of truth when the printer actually fed from multiple trays. Path 2 (AMS remain%-delta fallback) then naturally skips both trays because they're already in `handled_trays` after splitting, eliminating the double-credit. **Tests:** new `test_tray_change_recorded_during_intermediate_state` and `test_tray_change_not_recorded_after_completion` in `test_bambu_mqtt.py` exercising the new gate; new `test_tray_switch_overrides_print_cmd_mapping` in `test_usage_tracker.py` pinning that with `ams_mapping=[0]` set and `tray_change_log=[(0,0),(1,30)]` the splitter produces two segments summing to the 3MF estimate (no double-count) and adds both `(0,0)` and `(0,1)` to `handled_trays`.
- **3D Preview returned `{"detail":"Not Found"}` in Docker installs** ([#1218](https://github.com/maziggy/bambuddy/issues/1218)) — The embedded GCode viewer's static assets (`gcode_viewer/`) were not copied into the production Docker image, so clicking "3D Preview" on any archive loaded an iframe at `/gcode-viewer/?archive=<id>` that returned a bare FastAPI 404 — Firefox / Chrome rendered the JSON response inside the iframe area while the outer Bambuddy layout looked normal, masking the failure unless the user actually inspected the iframe. The Vite production build doesn't stage `gcode_viewer/` into `static/` either (the dev server serves it via a `configureServer` middleware that's dev-only), and the only integration test for the route accepted `404` as a valid outcome ("`assert response.status_code in (200, 404)`") so CI never caught the missing files. Affected every Docker build since the embedded viewer landed in 0.2.4b1 (commit `3adce435`, 2026-04-22). **Fix:** `Dockerfile` now copies the `gcode_viewer/` directory alongside the React build output. **Defence in depth:** `backend/app/main.py` logs an ERROR at startup when `_gcode_viewer_dir / "index.html"` is missing so future packaging gaps surface in `docker logs` and the support bundle instead of as silent runtime 404s. **Test guard:** `backend/tests/integration/test_gcode_viewer.py` adds `test_gcode_viewer_index_served_when_assets_present` which skips when the directory is intentionally absent (unit-test environments) but asserts `200 OK` + a non-empty HTML body when the assets do exist on disk — so a future broken `COPY` fails CI loudly rather than continuing to ship a broken image.
- **Slice button no longer enabled before the preview slice resolves** — Until the preview slice (or embedded-metadata read for already-sliced 3MFs) returned the per-plate filament list, the SliceModal rendered a synthetic single-slot fallback so the auto-pick had something to bind against. That made the Slice button enabled the moment the modal opened, even before the slicer had told us which AMS slots the plate actually consumes — clicking would dispatch against opaque defaults and the real-life print would either pick the wrong filament or fail with a slot-mismatch error after the fact. Adds `filamentReqsQuery.isSuccess` to the `isReady` chain so the button stays disabled while the preview slice is in flight (or before the backend's `/filament-requirements` call settles for sliced files) and flips to enabled the moment the real slot list lands and auto-pick fills it.
- **New AMS RFID rolls auto-named to the wrong colour when the hex is shared across material variants** ([#1227](https://github.com/maziggy/bambuddy/issues/1227)) — Inserting an Ivory White (PLA Matte) roll always created a spool named "Jade White" because the colour-catalog lookup in `create_spool_from_tray` filtered by manufacturer + hex only, with no `ORDER BY`. Three Bambu Lab catalog rows share `#FFFFFF` — Jade White (PLA Basic), Ivory White (PLA Matte), White (PLA Silk) — and SQLite returned them in rowid order, so the first-inserted entry (Jade White) won every time regardless of the actual material the AMS reported. Same class of bug bites any other shared-hex pair across PLA Basic / Matte / Silk; the whites were just the most visible. **Fix:** `spool_tag_matcher.py::create_spool_from_tray` now filters the catalog by `tray_sub_brands` too — the printer-reported material variant ("PLA Matte" / "PLA Basic" / "PLA Silk") matches the catalog's `material` column directly. The query also gets an explicit `ORDER BY id` so the fallback path (when `tray_sub_brands` is empty — third-party spools / OpenTag tags) is deterministic across SQLite + PostgreSQL instead of DB-implementation-defined. The catalog lookup uses the *raw* `tray_sub_brands` value (before the gradient/dual/tri-color subtype upgrade at lines 73-87) because the catalog stores `"PLA Basic"` for gradient rolls too — the upgraded subtype lives on the spool, not the catalog row. **Note for affected users:** spools already in the database under the wrong colour name (e.g. four Ivory White rolls labelled "Jade White") don't auto-correct on next AMS read — the matcher only fires when *creating* a new spool from RFID. Existing rows need a manual rename in Inventory after upgrading. **Tests:** 4 new in `test_spool_tag_matcher.py` — `test_ivory_white_pla_matte_resolves_to_ivory_not_jade` (the #1227 regression pin), `test_pla_silk_white_resolves_to_white_not_jade` (the third collision), `test_jade_white_pla_basic_still_resolves_correctly` (happy-path guard with all three #FFFFFF entries seeded), and `test_unknown_material_falls_back_to_hex_only_lookup` (third-party / empty `tray_sub_brands` path stays deterministic via ORDER BY).
- **Backups to Gitea / Forgejo failed with "Failed to create tree" on empty repos and "list indices must be integers or slices, not str" on populated repos** ([#1224](https://github.com/maziggy/bambuddy/issues/1224), [#1225](https://github.com/maziggy/bambuddy/issues/1225)) — Two interacting bugs in the Gitea/Forgejo backend, both inherited from `GitHubBackend` because PR #1160's class docstring assumed Gitea's Git Data API was fully GitHub-compatible. (1) **List-shaped ref response:** `GET /api/v1/repos/{owner}/{repo}/git/refs/heads/{branch}` returns a *list* of matching refs on Gitea/Forgejo even when only one matches (`[{"ref": ..., "object": {"sha": ...}}]`), whereas GitHub returns a single object. The inherited `push_files` and `_create_branch_and_push` did `ref_response.json()["object"]["sha"]` and crashed with `list indices must be integers or slices, not str` — surfacing as the failure at the top of any push against a populated Gitea repo (#1225's symptom, and #1224's symptom once the user committed any file before the first backup). (2) **Empty-repo writes refused:** GitHub's Git Data API accepts `POST /git/blobs` against a brand-new empty repo and creates the initial commit + branch implicitly. Gitea refuses every blob/tree/commit POST with 404 until the underlying git repo has at least one commit — so the inherited `_create_initial_commit` (which posts blobs → tree → commit → ref in that order) silently failed: every blob POST returned 404, `tree_items` ended up empty, and the next tree POST also returned 404 ("Failed to create tree" — #1224's symptom on a freshly-created empty Gitea repo). **Fix:** `GiteaBackend` now overrides `push_files`, `_create_branch_and_push`, and `_create_initial_commit` directly instead of inheriting them. The Git Data API path uses a `_ref_sha()` helper that accepts both list and dict shapes; the empty-repo bootstrap route uses Gitea's Contents API (`POST /api/v1/repos/{owner}/{repo}/contents` with a `files` array, `branch=<target>`, `new_branch=<target>`) which seeds the initial commit + branch in a single transaction — Contents API is documented to work on empty repos because it goes through Gitea's higher-level repo-init path. `GitHubBackend` is **untouched** — the GitHub backup path is proven working, the fix is fully isolated to the Gitea side. `ForgejoBackend(GiteaBackend)` inherits both fixes automatically; tests pin that. **Tests:** 10 new tests in `test_git_providers.py` — `TestGiteaBackendListShapeRefResponse` (4 tests: `_ref_sha` accepts list/dict/empty-list, plus full `push_files` happy paths against list-shaped branch ref and list-shaped default-branch ref), `TestGiteaBackendEmptyRepoInitialCommit` (4 tests: empty repo routes through Contents API exclusively with no blob/tree/commit/ref Git Data API calls, payload shape verified field-by-field against Gitea's documented schema, error truncation works, empty file dict returns `skipped` without firing a useless API call), and `TestForgejoInheritsGiteaFixes` (2 tests: list-shape and empty-repo paths both work via inheritance). Existing 6 `TestGiteaBackendPushFiles` tests still pass since `_ref_sha` accepts dict-shaped responses too. Total: 78 tests pass across the backup unit + integration suites; ruff clean. **Follow-up fix (still under #1224):** subsequent backups against Gitea 1.24+ then failed with the opaque "Backup failed: 'tree'" because Gitea's `GET /repos/{owner}/{repo}/git/commits/{sha}` returns the wrapped `Commit` schema (tree at `commit.tree.sha`), whereas GitHub's same-named Git Database endpoint returns the unwrapped `GitCommit` schema (tree at top level). The bare `commit_response.json()["tree"]["sha"]` lookup at `gitea.py:109` raised `KeyError: 'tree'` and the broad `except` surfaced it as the opaque message. **Fix:** `_commit_tree_sha()` helper that tries the flat shape first (GitHub-compatible / older Gitea) and falls back to the wrapped shape (Gitea 1.24+, Forgejo) — keeps the existing-files diff working on both shapes so subsequent backups don't re-upload every blob. **Tests:** new `TestGiteaBackendWrappedCommitResponse` (4 tests: helper accepts flat / wrapped / missing shapes, full `push_files` succeeds against a wrapped commit response, failure path surfaces a clear error message instead of `KeyError` when the tree SHA can't be extracted).
- **Docker data-volume ownership normalised at startup via gosu entrypoint** ([#1211](https://github.com/maziggy/bambuddy/issues/1211)) — Two long-standing failure modes have been biting Docker users repeatedly: (1) Docker named volumes are created by the daemon as `root:root`, and the previous `chmod 777 /app/data` Dockerfile workaround only covered the named-volume root — so subdirs Bambuddy creates at runtime (`virtual_printer/uploads`, `virtual_printer/certs`, etc.) inherited wrong ownership when the container ran as `1000:1000`. (2) The shipped `docker-compose.yml` ships `./virtual_printer:/app/data/virtual_printer` uncommented, and dockerd creates a missing bind-mount source on the host as root before the container starts — leaving the host directory unwritable by uid 1000 inside the container even though the named volume above it had the chmod-777 workaround. Symptom either way: `[Errno 13] Permission denied: '/app/data/virtual_printer/uploads'`, no virtual printer ever starts, "VP doesn't work" support reports follow. **Replaces the chmod-777 hack with a proper entrypoint:** `deploy/docker-entrypoint.sh` runs as root, chowns `/app/data` and `/app/logs` (and `/app/data/virtual_printer` when bind-mounted) to `PUID:PGID`, then drops to that uid via `gosu` before `exec`'ing the app. The chown is gated behind a top-level ownership check so subsequent restarts skip the recursive traversal — no multi-second startup penalty on multi-GB archive directories. A sentinel `.bambuddy` file in each data path prevents Docker from re-syncing image directory metadata on every mount (otherwise empty volumes have their ownership reverted from the image on each restart, defeating the idempotency). When the container is started with an explicit `user:` directive or `--user` flag the entrypoint detects it isn't root and falls through to direct `exec` — preserving compatibility for users who pin a specific uid. **Compose template changes:** removes `user: "${PUID:-1000}:${PGID:-1000}"` (the entrypoint owns privilege drop now), adds `PUID` / `PGID` env vars with the same defaults, and comments out the `./virtual_printer:/app/data/virtual_printer` bind mount by default with explicit "only needed if you also run a native install of Bambuddy on the same host and want both to share the VP CA cert" guidance. The entrypoint chowns the host-side dir through the bind mount the first time it sees wrong ownership, so existing uncommented installs continue to work and #1211 specifically gets fixed.
- **Label picker modal clipped the 4th template option and Cancel button on short viewports** ([#1230](https://github.com/maziggy/bambuddy/issues/1230), reported by @elit3ge) — Clicking "Print labels" from Inventory opened the picker with only 3 of the 4 templates visible (Avery 5160 was half-cut at the bottom) and no Cancel button reachable, with no way to scroll to them. Surfaced reliably on Windows 11 + Brave at 1080p with browser chrome / DPI scaling shrinking the effective viewport, but the layout bug hits anywhere the modal's `max-h-[90vh]` lands below ~770 px. **Cause:** `LabelTemplatePickerModal.tsx` uses a flex column with `overflow-hidden` on the outer modal, the spool list as the `flex-1` shrinkable child, and the templates section + footer as fixed siblings below it. The spool list had `min-h-[160px]`, which combined with the default `min-height: auto` for flex items meant the spool list couldn't yield space when the modal was tight — the templates and footer overflowed the modal's bottom edge and got clipped. **First fix (insufficient):** `min-h-[160px]` → `min-h-0` on the spool list scroller, which both removes the fixed floor and overrides the implicit `min-height: auto`. That made the spool list shrink, but on the user's 838 px viewport with browser chrome eating into 90 vh the four stacked templates (~310 px) plus footer still didn't fit, leaving Avery 5160 half-cut and the Cancel button below the modal's clipped bottom edge — `elit3ge` confirmed the dev build was still broken after that fix. **Second fix:** the templates section now renders as a responsive grid (`grid-cols-1 sm:grid-cols-2 gap-2`) so the four buttons pack into a 2×2 grid above the `sm` breakpoint, trimming ~150 px of vertical inside the modal. Each cell tightens its label/hint to `text-sm` + `truncate` (with the full strings reachable via the new `title=label — hint` on the button so the truncation never hides information), padding shrinks to `p-2.5`, and the footer's `py-3` is dropped to `py-2` for a few extra pixels. The earlier `min-h-0` on the spool list is kept as a belt-and-braces shrink for any viewport tighter still. Pre-existing on `dev` since 0.2.4b2 (commit `864e5c99`, the original PR #809 that introduced the modal); not a regression from the spoolman-inventory rebase. **Test:** the regression test in `LabelTemplatePickerModal.test.tsx` is upgraded to pin the new structural shape — the templates container has `grid` + `grid-cols-1` + `sm:grid-cols-2` and exactly 4 child buttons, plus the existing assertions that all 4 template names + the Cancel button render and the spool list scroller still has `min-h-0` with no fixed `min-h-[…]` literal. So a future refactor that drops the grid and reintroduces stacked rows fails CI.

### Security
- **urllib3 floor raised to 2.7.0 to clear CVE-2026-44431 and CVE-2026-44432** — `urllib3` is a transitive dependency (none of Bambuddy's top-level deps require `>=2.7.0` yet), so the resolver was silently keeping the vulnerable `2.6.x` line. `requirements.txt` now carries an explicit `urllib3>=2.7.0` pin under the HTTP-client section with an inline comment explaining the indirect-dep rationale, so a future `pip install -r requirements.txt` rebuild picks up the upstream-fixed release. No Bambuddy code change — the affected code paths live inside urllib3 itself.

- **python-multipart bumped to 0.0.27 to clear CVE-2026-42561** — `requirements.txt` floor raised from `>=0.0.26` to `>=0.0.27`. python-multipart is the multipart/form-data parser FastAPI uses for `UploadFile` body parsing, so it sits on every Bambuddy upload path (3MF/STEP/STL upload, label-template imports, OIDC certificate upload, backup restore, etc.). The advisory is a parser-side issue against malformed multipart input; Bambuddy doesn't expose unauthenticated upload endpoints (every multipart route is gated on either `Permission.LIBRARY_UPLOAD` / `SETTINGS_UPDATE` / `INVENTORY_UPDATE`), so blast radius is bounded to authenticated callers — but the bump is mechanical and the floor was already loose, so no reason to wait.

## [0.2.4b2] - 2026-05-05

### Changed
- **Virtual Printer Tailscale toggle no longer provisions Let's Encrypt certs — it's now informational** — The original promise of the `tailscale_disabled` toggle was that flipping it on would obtain an LE cert via `tailscale cert` so users wouldn't need to import Bambuddy's CA into the slicer. End-to-end testing exposed that this was always going to fail: BambuStudio and OrcaSlicer both refuse hostname input in the Add Printer dialog (IP-only), and — more fundamentally — their printer-MQTT trust path validates only against the bundled BBL CA store (`printer.cer`), **not** the system trust store. Confirmed against ClusterM/open-bambu-networking's clean-room reimplementation: `mosquitto_tls_set(BBL_CA)` + `mosquitto_tls_opts_set(verify_peer=1)` + `mosquitto_tls_insecure_set(true)` — chain validation against BBL CA only, hostname check intentionally skipped (because Bambu's printer cert CN is the device serial, not an IP/hostname). LE-issued certs don't chain to BBL CA, so the slicer rejects with the well-known "-1" before any hostname/IP logic runs. The cert-import step is unavoidable; the LE provisioning was dead code for slicer connections. **What stays:** the toggle, the `/virtual-printers/tailscale-status` route, the docker socket mount, and the host-level Tailscale information surfaced on the VP card (IP + MagicDNS hostname + copy button) so users know what to paste into the slicer when they pick the Tailscale interface from the bind_ip dropdown. Tailscale's role is now strictly **network reach** — private WireGuard tunnel to the VP from any tailnet device, no port forwarding — exactly the same trust burden as LAN. **What goes:** `provision_cert` / `ensure_cert` / `cert_needs_renewal` and the daily renewal task / restart-on-renewal plumbing on the manager (`_cert_renewal_task`, `_cert_restart_task`, `_cert_renewal_loop`, `_restart_for_cert_renewal`, `_cancel_renewal_task`, `_cancel_restart_task`); the `tailscale_fqdn` field surfaced via VP status (cert side-effect); the `tailscale_not_available` 409 guard on toggle-enable in both `routes/virtual_printers.py` and `routes/settings.py` (toggle is informational, daemon presence doesn't block flipping it); `CertificateService.{ts_cert_path, ts_key_path, use_tailscale_cert}` and the LE cert files on disk (`virtual_printer_ts.{crt,key}` left in place per-VP — harmless residue, can be deleted manually). The `tailscale_disabled` DB column is **kept** as the persisted toggle state. Tailscale FQDN/IP on the VP card is now sourced from the existing `/tailscale/status` endpoint (host-level) rather than from per-VP cert provisioning side-effect — the data is the same regardless of which VP you're looking at, since each host has one Tailscale identity. **Wiki, README, and i18n copy updated across all 8 locales** to drop the "no cert import needed" framing — toggle's helper text now says it surfaces the Tailscale address and that CA import is unchanged. **Tests:** `test_tailscale.py` reduced to the surviving `get_status` cases (binary missing, command fails, success, empty DNSName, malformed JSON); `test_virtual_printer.py::test_sync_from_db_restarts_on_tailscale_disabled_change` rewritten as `test_sync_from_db_does_not_restart_on_tailscale_toggle` (toggle is informational — `remove_instance` must NOT be called when only `tailscale_disabled` changes); `test_virtual_printer_api.py::TestVirtualPrinterTailscaleGuardAPI` collapsed to a single `TestVirtualPrinterTailscaleToggleAPI::test_toggle_does_not_consult_tailscale_daemon` that asserts both directions succeed and `get_status` is never called. Frontend `VirtualPrinterCard.test.tsx` mock now stubs `getTailscaleStatus` and the FQDN-copy block drives the FQDN through that query rather than VP status.

### Added
- **Spool label printing** ([#809](https://github.com/maziggy/bambuddy/issues/809)) — Closes the longest-standing inventory gap: there's now a per-spool "Print label" button on every Inventory card and a "Print labels (N)" header action that prints labels for the currently filtered view. Generates a PDF in one of four fixed sizes — AMS holder (30×15 mm) for the popular Makerworld AMS Filament Label Holder, single box label (62×29 mm) for Brother PT/QL or Dymo small labels, Avery L7160 for A4 sheet stock (38.1×63.5 mm × 21 per page), and Avery 5160 for US Letter sheet stock (25.4×66.7 mm × 30 per page) — and opens it in a new browser tab so users can print or save. Each label shows a colour swatch (with multi-colour gradient stripes for spools that have `extra_colors` set), brand + material, the spool's own name, the **spool ID** (the field bsaunder flagged as the most-needed for "find spool 7 in my closet" identification), and a **QR code that deep-links to `/inventory?spool=<id>`** so a phone scan jumps straight back to that spool's row in Bambuddy. The box-size template additionally surfaces the storage location field. **Architecture:** `backend/app/services/label_renderer.py` is a pure-Python renderer using ReportLab (no headless browser, no system libs) and qrcode (already a dependency); the QR target uses the configured `external_url` setting if present so phone scans reach the right hostname, otherwise falls back to the request's own scheme+host. Renderer is fully decoupled from the SQLAlchemy model — input is a `LabelData` dataclass list — so the same code path serves both the local DB inventory and the Spoolman-backed inventory once the dedicated UI lands. Two endpoints: `POST /inventory/labels` (local) and `POST /spoolman/labels` (Spoolman-backed; fetches via the existing client and filters in-memory). Both gated on `Permission.INVENTORY_READ`, both cap requests at 500 spools per call to bound rendering time, both stream `application/pdf` directly. **Why server-side and not browser print?** Server-side gives consistent output across browsers, Avery sheet templates that align to <0.1 mm (browser print scaling drifts 2–3 mm per page), one-click "download all 30 selected as one PDF", no print-dialog header/margin fiddling, and reproducible output for support — at the cost of one new pure-Python dep and ~250 lines of layout code. **Out of scope for V1:** direct-to-label-printer drivers (Dymo / Brother / Zebra ZPL — each is its own multi-week project, follow-up issue per vendor if demand surfaces), user-customizable HTML/CSS templates / template DSL (the four built-ins cover the use case bsaunder articulated; templating engines are where this kind of feature usually drowns), and the "global label mixin for spools/projects/printed parts" framework Keybored02 sketched (right direction for a future feature, not for V1). On the dev branch the local-mode UI is wired; the Spoolman-mode UI defers to the in-flight `feature/spoolman-inventory-ui` branch where the unified Spoolman picker lives. **Tests:** 15 unit tests in `test_label_renderer.py` (each template produces a valid PDF, empty input returns valid empty PDF, unknown template raises, multi-colour swatch survives 4+ stops, missing optional fields don't crash, malformed rgba falls back to grey, long strings are truncated not overflowed, sheet templates paginate when count exceeds one sheet, QR-bearing PDFs are noticeably larger than QR-less ones); 11 integration tests in `test_labels.py` (both modes produce PDFs, all four templates succeed, unknown template / empty list / unknown spool ID rejected with the right code, request order preserved into the renderer so Avery sheets match the on-screen list, Spoolman path returns 400 when disabled / 503 when unreachable / 404 when spool missing / 200 with the expected content-type when it works, request body capped at MAX_LABELS_PER_REQUEST); 7 frontend tests in `LabelTemplatePickerModal.test.tsx` (modal absent when closed, four templates rendered, singular vs plural subtitle, spoolmanMode false routes to local API and vice versa, neither API called when the other mode is active, error path keeps the modal open so the user can retry). All 8 locales get the new `inventory.labels.*` key set with English strings (other locales seeded with English copy pending native translation, matches the project's existing flow for newly-added user-facing features).
- **Virtual Printer non-proxy modes now mirror the live target printer to the slicer** ([#1193](https://github.com/maziggy/bambuddy/issues/1193) follow-up) — Until now, Immediate / Review / Print Queue VPs looked like a stub Bambu Lab printer to the slicer: AMS dropdowns were empty, no live state, no camera, no per-filament k-profile lookup. The user could send a sliced file and that was it. With this change, the VP fans out the **target printer's live MQTT state** to the slicer (AMS units, FTS / dual-extruder routing, nozzle, temps, k-profiles, AMS load / dry / calibration commands) and proxies the **camera RTSPS stream** on port 322 — so the slicer treats the VP as a fully-functional Bambu printer while Bambuddy's queue / archive / dispatch features stay in the loop. **Architecture (cached-as-base, single source of truth):** the bridge caches the latest real `push_status` and `info.get_version` response from Bambuddy's existing per-printer MQTT subscription (no second session on the printer — firmware in-flight budget unaffected, see #1164). The VP's `_send_status_report` returns a near-byte-identical copy of the real push with only the upload-state-machine fields (sequence_id, command, msg, gcode_state, gcode_file, prepare_percent, subtask_name) overridden under our control, so BambuStudio's Send pre-flight sees exactly the same shape as a direct-to-printer connection. Command responses (extrusion_cali_get, AMS write acks, xcam responses) are fanned out raw — they carry sequence_ids the slicer is waiting on. Slicer-issued commands forward to the real printer except `print.project_file` / `gcode_file`, which are still answered locally because the file lives on Bambuddy. **Field-shape gotchas worth remembering:** (1) Real Bambu printers wire-format push_status JSON with `indent=4` (32 254 bytes for an idle H2D push, vs 14 268 bytes compact) — BambuStudio's Send pre-flight rejects compact JSON silently, so `_publish_to_report` was switched to `json.dumps(payload, indent=4)`. (2) `net.info[*].ip` (little-endian uint32, e.g. 192.168.255.133 → 2248124608) is the FTP destination IP BambuStudio uses for "Send to Printer storage" — it overrides anything else, including the URL hosts the rest of MQTT advertises. The bridge rewrites this to the VP's bind IP on cache, otherwise the slicer FTPs straight to the real printer and bypasses Bambuddy entirely (symptom: "Failed to send" with zero inbound FTP connections on the VP — debug-by-tcpdump if anyone hits it again). (3) `upgrade_state.sn` and any other nested-dict `sn` matching the target serial are rewritten to the VP serial; AMS-hardware serials (`n3f/0.sn` etc.) are left alone — those identify physical AMS units, not the device. (4) `ipcam.rtsp_url` is left unchanged: BambuStudio overrides the URL host with the device IP it bound on (the VP), so the slicer hits the VP's :322 RTSPS port — not the printer's directly. (5) For the slicer's RTSPS to reach the printer, the VP gets a raw `TCPProxy` on `<bind_ip>:322 → <printer_ip>:322` (same approach proxy mode uses; `cap_net_bind_service` was already in the systemd unit for FTP :990). (6) `extrusion_cali_get` is forwarded — answering it locally hides the user's stored k-profiles. **Setup nuance for camera:** because the slicer authenticates against the printer's RTSPS with whatever access code is in its profile, the VP's access code must match the target printer's access code for the camera path to authenticate. This is a one-time configuration step (Settings → Virtual Printer → set access code = target printer's LAN code, then re-add the VP in Bambu Studio / Orca Slicer). MQTT and FTP work either way; only camera needs the match because RTSPS auth happens between the slicer and the real printer's broker. **Tested e2e** with both BambuStudio and OrcaSlicer against H2D (dual-nozzle, AMS 2 Pro + AMS HT) and X1C (single-nozzle, AMS) across all three non-proxy modes (Immediate / Review / Print Queue) — sync, send, k-profile lookup, AMS configuration from slicer, and live camera all work. **Files:** new `backend/app/services/virtual_printer/mqtt_bridge.py` (caches push_status / get_version, forwards slicer commands, fans out command responses, rewrites identity fields including `net.info[*].ip` LE uint32); `bambu_mqtt.py` gains `register_raw_message_handler` / `unregister_raw_message_handler` / `publish_raw` so the bridge can subscribe to Bambuddy's existing per-printer paho subscription without opening a second session; `mqtt_server.py` switches `_send_status_report` and `_send_version_response` to cached-as-base when the bridge has data, falls back to the original synthetic stubs otherwise; `manager.py` wires the bridge + a raw `TCPProxy` for RTSPS into `start_server` for non-proxy modes whenever a target printer is configured. 25 new tests in `test_vp_mqtt_bridge.py` pin the contract: lifecycle, push_status caching, serial / IP rewriting, get_version-modules cache, selective fan-out (only command responses, never push_status itself), wire format must use `indent=4`, routing of slicer-issued commands (project_file / gcode_file local; everything else forwarded), and the IP-encoding helper against captures from real H2D pushes. Proxy mode is untouched — `SlicerProxyManager` still owns its own MQTT/FTP/RTSP/Bind/Aux proxies in proxy mode and never instantiates `SimpleMQTTServer` or `MQTTBridge`.
- **AMS slot Load / Unload from the printer card** ([#891](https://github.com/maziggy/bambuddy/issues/891), reported by @NNeerr00, +1 from @cadtoolbox) — The MQTT primitives for "load filament from a tray" and "unload the currently loaded tray" already existed in `bambu_mqtt.py` (reverse-engineered from BambuStudio captures, including the H2D dual-extruder right-external case captured fresh during this work) but were unused — there was no HTTP route and no UI. Net effect: every Load / Unload had to happen on the printer touchscreen, and external-spool users on dual-nozzle H2D had no way to drive Ext-R from the desktop at all. **Backend:** new `POST /printers/{id}/ams/load?tray_id={int}` and `POST /printers/{id}/ams/unload`, both gated on `Permission.PRINTERS_CONTROL`. The load route validates `tray_id ∈ {0..15, 254, 255}` (AMS slots, single-external/Ext-L, Ext-R respectively) and returns a human-readable target in the success message ("AMS 0 slot 1", "external spool", "Ext-R") so the UI toast tells the user which spool the printer is now feeding from. **MQTT primitive update:** `ams_load_filament` gains a third encoding branch for `tray_id=255` matching the BambuStudio capture verbatim — `ams_id=255, slot_id=0` (the right-extruder index, **not** a slot index — Bambu's load command on dual-extruder externals encodes the destination extruder, not the source slot), `target=255`, and `curr_temp = tar_temp = right-nozzle temp` (read from `state.temperatures["nozzle_2"]`, falling back to 215 °C if the right nozzle is cold or unknown — the printer rejects nonsensical temps, so a warm fallback is safer than `-1`). The existing `tray_id=254` branch is preserved verbatim (`slot_id=254, curr/tar=-1`) since that came from a single-extruder capture and is known to work; no risk of regression on existing single-external setups. **UI:** the existing AMS slot popover (the one with "Re-read RFID") gains two new entries — "Load" (posts `tray_id = ams.id * 4 + slotIdx`) and "Unload" (no params, global on the currently-loaded slot). The external spool slot — which had no popover at all before — gets one with the same Load + Unload entries, and on dual-nozzle H2D each external slot (Ext-L tray_id=254, Ext-R tray_id=255) drives its own extruder. The menu is hidden while `state === 'RUNNING'` (parallels the existing RFID re-read gating). **i18n:** `printers.ams.load`, `printers.ams.unload`, plus four new toast strings (`loadInitiated`, `unloadInitiated`, `failedToLoad`, `failedToUnload`) added to all 8 locales — English fully translated, German fully translated, the other 6 locales seeded with English copy pending native translation (matches the project's existing flow for newly-added user-facing features). 16 new tests pin the contract: 5 unit tests in `test_bambu_mqtt.py::TestAmsLoadFilamentEncoding` (AMS slot encoding, Ext-L preserves legacy capture, Ext-R uses the new captured shape with actual right-nozzle temp, Ext-R falls back to 215 °C when cold, disconnected client doesn't publish); 11 integration tests in `test_printers_api.py::TestAMSLoadUnloadAPI` (load: invalid tray_id 400, not-found 404, not-connected 400, AMS slot success with derived `ams_id*4+slot` math, Ext-L success, Ext-R success, MQTT failure 500; unload: not-found, not-connected, success, MQTT failure 500); 4 frontend tests in `PrintersPageAmsLoadUnload.test.tsx` (Load posts the right tray_id, Unload posts with no params, menu hidden while RUNNING, external spool's tray_id=254 round-trips through the route).
- **API keys can read Bambu Cloud presets on the owner's behalf** ([#1182](https://github.com/maziggy/bambuddy/issues/1182), reported by @turulix) — Tim is building a fully automated headless slicing pipeline against Bambuddy's API and hit the wall flagged in the previous round of cloud-auth work ([#665](https://github.com/maziggy/bambuddy/issues/665)): `/cloud/*` routes resolve `cloud_token` per-user from `User.cloud_token`, but the auth gate (`require_permission_if_auth_enabled`, `auth.py:856`) returned `None` for API-keyed requests, so the route fell back to the global `Settings`-table token, which only carries a value in *auth-disabled* deployments. Net effect on auth-enabled deployments: API keys reached the gate just fine, then `/cloud/filaments` always saw `user=None`, called `get_stored_token(db, None)` against an empty Settings table, and returned 401 / empty results — no path to read the slicer presets, filament catalogue, or device list that a CLI workflow needs. The data model treated API keys as standalone tokens with no owner (`APIKey` had `id`, `name`, `key_hash`, scope flags, and `printer_ids` — no `user_id`), so even if the gate wanted to delegate the cloud lookup, there was no User to delegate to. **The fix:** make API keys carry an owner, route /cloud/* lookups through that owner, and gate the new capability behind an explicit opt-in scope so existing automation doesn't gain cloud-read access on upgrade. Concretely: (1) `APIKey` gains `user_id` (FK to `users.id`, ON DELETE CASCADE — Postgres enforces, SQLite plus an explicit `DELETE FROM api_keys WHERE user_id = ?` in the user-delete route since SQLite ships FK enforcement off; the project's existing pattern at `users.py:397-406` for `created_by_id` cleanup) and `can_access_cloud` (BOOLEAN DEFAULT 0 — opt-in, never set on legacy rows). (2) The auth gate now returns the owner User when it validates an API key with `user_id` set, so `/cloud/*` routes naturally resolve `user.cloud_token` the same way they do for JWT-authed sessions. Permission semantics are preserved — API keys still bypass the per-route permission check (their scopes live on the row itself), the User return is *only* so cloud-aware routes can read per-user state. Legacy ownerless keys (`user_id IS NULL`) keep returning None, stay anonymous, and continue working against every non-cloud route exactly as before. (3) A router-level dependency on the `/cloud/*` `APIRouter` enforces three independent fences for API-keyed callers: `user_id IS NOT NULL` (legacy keys → 401 with "recreate it from Settings → API Keys" — explicit recreate path rather than silently degrading), `can_access_cloud=True` (otherwise 403 with "Enable 'Allow cloud access' on the key"), and `build_authenticated_cloud` returning a service (otherwise 401 with the existing token-not-set error — unchanged for JWT flow). The router-level dep duplicates the API-key validation done by the regular auth gate (router-level deps run before route-level deps in FastAPI, so `request.state` isn't populated yet) — the cost is one extra `SELECT FROM api_keys` per cloud request, bounded and cheap with the `key_prefix` index. (4) The create route stamps `user_id = current_user.id` from the creator and rejects `can_access_cloud=True` when auth is disabled (no per-user `cloud_token` storage exists in that mode — fail loudly at create time rather than silently producing a non-functional key). PATCH route rejects flipping `can_access_cloud` to True on a legacy ownerless key for the same reason — force recreate. (5) `APIKeyResponse` exposes `user_id` so the UI can show ownership at a glance: a "Cloud" badge for cloud-enabled keys and a "Legacy" badge with hover tooltip ("Created before per-user ownership; recreate to use cloud access") for ownerless rows. The form gains an "Allow cloud access" checkbox, default off. **Migration:** two idempotent `ALTER TABLE api_keys ADD COLUMN` (`user_id INTEGER REFERENCES users(id) ON DELETE CASCADE` and `can_access_cloud BOOLEAN DEFAULT 0`) plus an index on `user_id` for the auth-gate's owner→keys lookup that runs on every API-keyed request. **i18n:** 5 new keys (`settings.cloudAccess`, `settings.cloudAccessDescription`, `settings.cloudBadge`, `settings.legacyKey`, `settings.legacyKeyTooltip`) added to all 8 locales — English fully translated, German fully translated, the other 6 locales seeded with English copies pending native translation (matches the project's existing flow for newly-added user-facing features). 9 backend integration tests in `test_api_key_cloud_access.py`: create stamps owner + cloud flag, defaults off when not asked for, rejected when auth disabled (no per-user storage), PATCH rejected on legacy keys; cloud router rejects legacy keys with the recreate copy, rejects owned-but-no-cloud-flag keys with the enable-cloud-access copy, lets owned-and-flagged keys through with owner's `cloud_token` in the response, JWT callers unaffected (gate is no-op for non-API-keyed); user-delete CASCADEs the API keys via the explicit DELETE in the route. 2 frontend SettingsPage tests pin the badge rendering matrix (Cloud badge present on `can_access_cloud=true`, Legacy badge present on `user_id=null`, neither rendered on a normal owned non-cloud key) and the create-form contract (toggling "Allow cloud access" results in `can_access_cloud=true` in the POST body). Permission semantics for the new fence are the only behavioural change for existing API keys: keys created before this release become "legacy" rows and are rejected at /cloud/* with the recreate message; every other endpoint they were used against — queue, status, control — is untouched.

- **Home Assistant addon detection — Settings → Updates and the in-app update banner now defer to the HA Supervisor** ([#1167](https://github.com/maziggy/bambuddy/issues/1167), reported by @Spegeli) — Bambuddy already shipped `HA_URL`/`HA_TOKEN` env-var support specifically labelled "for HA Add-on deployments" ([#283](https://github.com/maziggy/bambuddy/issues/283)) and a community-maintained HA addon (`hobbypunk90/homeassistant-addon-bambuddy`) exists upstream, so an HA-supervised installation is a real first-class deployment shape. Until now though, the update UI didn't know about it: HA addon users got the same "Update available!" banner as everyone else and, if they clicked through to Settings, saw the docker-compose snippet ("`docker compose pull && docker compose up -d`") which they cannot run from inside an HA addon container — that's the Supervisor's job. Detection uses the canonical signal: HA Supervisor injects `SUPERVISOR_TOKEN` into every addon container, and that variable is not set in any other environment. A new `_is_ha_addon()` helper in `backend/app/api/routes/updates.py` flips a request-level boolean which `/updates/check` surfaces as `is_ha_addon: bool` + an extended `update_method: 'git' | 'docker' | 'ha_addon'` enum. The check is checked **before** Docker on `/updates/apply` because HA addons *are* Docker containers — checking docker first would mis-classify them and serve the wrong message; the response also keeps `is_docker: true` alongside `is_ha_addon: true` so older frontend bundles still hit a managed-deployment branch (degrading to the Docker UX) instead of rendering an in-app Install button that can't work. Frontend branches identically: `SettingsPage.tsx`'s update card checks `is_ha_addon` first and renders "Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version." in place of the docker-compose hint; `Layout.tsx`'s update banner is suppressed entirely for HA addons since the HA Supervisor's own update notification already surfaces the new version natively in the HA UI and a duplicate Bambuddy banner would just be noise that links to a page that says "go to HA". Plain Docker deployments are unaffected — the existing docker-compose hint and the in-app banner still render the same way they did. Localised across all 8 UI languages (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW) with full translations of the new `settings.updateViaHomeAssistant` string. 6 new tests pin the contract: 3 backend unit tests for `_is_ha_addon()` (env var present → true, absent → false, empty string treated as unset to guard against shells that export it empty), 1 backend integration test for the HA-precedes-Docker rejection on `/updates/apply` (asserts the message says "Home Assistant" and not "Docker Compose"), 2 backend integration tests for `/updates/check` covering the HA-addon branch (`update_method == "ha_addon"`, both flags true) and the plain-Docker branch (`is_ha_addon: false`, `update_method == "docker"`); 2 frontend SettingsPage tests pin the mutually-exclusive UI rendering (HA branch shows the HA copy and not the docker-compose snippet; Docker branch shows the snippet and not the HA copy, neither shows the Install button); 2 frontend Layout tests pin the banner suppression for HA and its retention for plain Docker.

- **OIDC auto-created users now get readable usernames and land in a configurable group** ([#1173](https://github.com/maziggy/bambuddy/issues/1173)) — Two improvements to the OIDC auto-create flow: (1) **Username derivation**: Bambuddy now derives the username from `preferred_username`, then `name`, before falling back to the opaque `provider_sub[:30]`. Each candidate is sanitized independently — alphanumeric plus `./-/_`, whitespace collapsed, deduplication suffix appended on collision — so a value that strips to empty (e.g. `"!!!"`) correctly falls through to the next option rather than silently producing `"oidcuser"`. (2) **Default group**: each OIDC provider gains a `default_group_id` field. When set, auto-created users are placed in that group; when unset, the existing "Viewers" fallback is preserved, so behaviour is unchanged for existing deployments. The column is nullable with `ON DELETE SET NULL`; SQLite does not enforce FK constraints here, so a deleted configured group falls through to Viewers at runtime. `default_group_id` is validated on create/update (422 on a non-existent group). Exposed in the OIDC settings form as a group dropdown. **Limitation:** to clear a configured default group, delete the group or select a different one — explicit reset-to-null is not currently supported.

- **Filament Track Switch (FTS) support — print modal filament dropdown is no longer empty when an X2D / H2D has the FTS accessory installed** ([#1162](https://github.com/maziggy/bambuddy/issues/1162), reported by @mkavalecz) — When the FTS accessory is installed the printer's MQTT changes one nibble of the per-AMS `info` bitmask: bits 8-11 flip from a fixed extruder ID (0x0 / 0x1) to `0xE` ("uninitialized"), because the AMS is no longer wired to a single nozzle — the FTS dynamically routes any slot to either extruder. Bambuddy's MQTT parser already skipped 0xE entries when building `ams_extruder_map` (matching BambuStudio's reading for boot-time transient state), so with the FTS installed the map ended up empty and the print modal's filament dropdown — which filters by `extruderId === nozzle_id` to prevent cross-nozzle assignment ("position of left hotend is abnormal" failures) — filtered out *every* loaded slot. Net effect: empty Filament Mapping dropdown on every dual-nozzle print with the FTS, even when the AMS was fully loaded with the right material. Detection comes from a new MQTT field — `print.device.fila_switch` — which is non-null only when the accessory is installed; it carries the routing topology as two arrays: `in[track] = currently fed slot (-1 = empty)` and `out[track] = extruder this track terminates at`. The fix surfaces this through a new `FilaSwitchState` dataclass on `PrinterState` (`installed`, `in_slots`, `out_extruders`, `stat`, `info`) and the equivalent `FilaSwitchResponse` Pydantic schema on the `GET /printers/{id}/status` route. Frontend (`useFilamentMapping.ts` + `FilamentMapping.tsx`) skips the per-extruder filter when `printerStatus.fila_switch?.installed === true` so any compatible AMS slot can satisfy any nozzle's filament requirement, since the FTS handles the routing. Slots currently fed into a track also get a routing badge in the dropdown — `[L]` or `[R]` — so the user can tell at a glance which slot the FTS is currently routing where (idle slots get no badge: they can be routed to either extruder on demand). The hard "no cross-nozzle assignment" filter on real dual-nozzle printers without the FTS stays untouched (still trips the same way it always has — `fila_switch == null` keeps the existing behaviour). 4 backend tests in `test_bambu_mqtt.py::TestFilamentTrackSwitchDetection` (default-not-installed, detect-from-MQTT-using-the-reporter's-bundle, no-fila_switch-field-stays-not-installed, missing-in-out-arrays-don't-crash) and 2 frontend tests in `useFilamentMapping.test.ts` (FTS-active drops the nozzle filter; explicit `fila_switch: null` keeps the filter applied). Upstream fila_switch payloads with anything other than the documented shape are tolerated — `installed` flips on the *presence* of the field, the routing arrays default to empty lists if missing, and the dropdown skips the badge for slots not currently in `in_slots`.

### Fixed
- **Docker permission errors on `/app/data/virtual_printer` and similar paths — root-owned volumes / bind-mount sources no longer break virtual printer setup** ([#1211](https://github.com/maziggy/bambuddy/issues/1211) follow-up; same shape as multiple previous user reports) — Two related failure modes have been biting Docker users repeatedly: (1) Docker named volumes are created by the daemon as `root:root` and the previous `chmod 777 /app/data` Dockerfile workaround only covered the named-volume root, so subdirs Bambuddy creates at runtime (`virtual_printer/uploads`, `virtual_printer/certs`, etc.) inherited the wrong ownership when the container ran as `1000:1000`; (2) the shipped `docker-compose.yml` ships `./virtual_printer:/app/data/virtual_printer` uncommented, and dockerd creates a missing bind-mount source on the host as root before the container starts — leaving the host directory unwritable by uid 1000 inside the container even though the named volume above it had the chmod-777 workaround. Symptom either way: `[Errno 13] Permission denied: '/app/data/virtual_printer/uploads'`, no virtual printer ever starts, "VP doesn't work" support reports follow. **Fix:** new `deploy/docker-entrypoint.sh` runs as root, normalises ownership of `/app/data` and `/app/logs` (and `/app/data/virtual_printer` when bind-mounted) to `PUID:PGID` (default `1000:1000`, overridable via env), then drops to that uid via `gosu` before exec'ing uvicorn. The chown is gated behind a top-level ownership check so subsequent restarts skip the recursive traversal entirely (no multi-second startup penalty on multi-GB archive dirs). A sentinel `.bambuddy` file in each data path prevents Docker from re-syncing image directory metadata on every mount (otherwise empty volumes have their ownership reverted from the image on each restart, defeating the idempotency). When the container is started with an explicit `user:` directive in compose or `--user` on `docker run`, the entrypoint detects it isn't running as root and falls through to direct exec without modifying ownership — preserving compatibility with users who pin a specific uid. **Compose template changes:** the `user: "${PUID:-1000}:${PGID:-1000}"` line is removed (entrypoint owns privilege drop now); `PUID` / `PGID` env vars added with the same defaults; `./virtual_printer:/app/data/virtual_printer` bind mount commented out by default with a clearer explanation of when it's actually needed (only when sharing the VP CA certificate with a co-located native install, which most Docker-only users don't have). Existing users with that bind mount uncommented continue to work — the entrypoint chowns the host-side directory through the bind mount the first time it sees the wrong ownership, fixing #1211 specifically. **Tested end-to-end** against four scenarios on a clean rebuild: (a) named volume only with default PUID/PGID; (b) explicit `--user 1000:1000` override (entrypoint falls through); (c) custom `PUID=1500`; (d) legacy stale root-owned volume contents from a pre-fix install (gets normalised on first start). Idempotency verified: chown messages appear on first start, subsequent starts are silent.

- **Backup restore silently lost most data — settings reverted to defaults, ~most printers/archive rows missing** ([#1211](https://github.com/maziggy/bambuddy/issues/1211), reported by @Carter3DP; same shape as previously-closed [#668](https://github.com/maziggy/bambuddy/issues/668)) — Restoring a settings backup ZIP appeared to succeed but the user found their `energy_cost_per_kwh` reverted to the `0.15` default (defined in `main.py:3457`), 7 of 8 printers gone, 1 GB of archive files on disk but only 1 archive row in the database. #668 was closed in March without an actual fix — that user happened to make it work by rolling back to a stable release, which masked the bug; same shape resurfaces here on a single (consistent) version. **Cause:** the live database runs in WAL mode (`PRAGMA journal_mode = WAL` in `database.py:19`). The original restore endpoint used `shutil.copy2(backup_db, db_path)` after `engine.dispose()`. Two things conspired to make this unsafe: (1) anything the fresh container wrote between startup and the restore call — `seed_default_groups`, `init_db()` migrations, background heartbeat writes — sits in `bambuddy.db-wal` with valid checksums, and `engine.dispose()` doesn't checkpoint it; (2) FastAPI's dependency injection keeps the route handler's own `db: AsyncSession = Depends(get_db)` session checked out across `engine.dispose()` (per SQLAlchemy docs, dispose only closes pooled — not checked-out — connections), so the WAL inode is held open through the whole restore. After `shutil.copy2` rewrote the main DB inode in place, SQLite's WAL recovery on the next `init_db()` happily re-applied the stale frames on top of the restored content, partially clobbering it with fresh-install state. Initial fix attempt of "delete the WAL/SHM/journal sidecars before the copy" turned out to be insufficient — verified experimentally that the still-open request session reads the unlinked sidecars via held fds and bleeds the WAL state back into the new file when it eventually closes. **Real fix:** replace the file copy with SQLite's online backup API (`src_conn.backup(dst_conn)`). The page-by-page protocol opens both DBs as proper SQLite connections, acquires the right locks, and routes new pages through the destination's own WAL — concurrent open sessions see their own transactional snapshot until they close (transaction isolation) but can't corrupt the restored state. Verified via 6 regression tests in `backend/tests/unit/test_restore_sqlite_wal_safety.py`: the buggy `shutil.copy2` path is pinned (the test asserts the bug *manifests* under the un-checkpointed-WAL condition, so a future "small simplification" can't silently re-introduce it); the production `src_conn.backup(dst_conn)` path returns the user's restored values exactly under the same bug condition; the no-WAL-frames case (fresh container, restore as the very first action) round-trips cleanly; and the page-protocol parametrised test runs at 1, 100, and 1000-page DB sizes so a regression at any one size surfaces. PostgreSQL path (`_import_sqlite_to_postgres`) is unchanged — that's row-by-row already and was never affected.

- **`formatTimeOnly` tests failed under non-`:`-separator locales** ([#1213](https://github.com/maziggy/bambuddy/issues/1213), reported by @maugsburger) — Running the frontend test suite under `LC_ALL=en_DK.UTF-8` (or any locale whose `toLocaleTimeString` uses a separator other than `:`) failed two tests in `frontend/src/__tests__/utils/date.test.ts`: `formats time with 12h format` (expected `02.30 pm` to match `/2:30|02:30/`) and `formats time with 24h format` (expected `14.30` to contain `14:30`). The implementation is correct — `formatTimeOnly` calls `date.toLocaleTimeString([], …)` which by design respects the user's locale, so a Danish-English user genuinely should see `02.30 pm` in the UI. The tests just hard-coded the `:` separator. **Fix:** test assertions now use `\D+` (any non-digit, one or more) for the separator: `expect(result).toMatch(/\b0?2\D+30\b/)` and `expect(result).toMatch(/\b14\D+30\b/)`. Tests the actual contract — "the function returns hours and minutes, separated somehow" — without coupling to a specific separator that varies by locale (en_DK uses `.`, some en_* locales use a narrow no-break space at U+202F, most others use `:`). Verified passing under `en_DK.UTF-8`, `en_US.UTF-8`, and `de_DE.UTF-8`. Audited every other `toLocaleTimeString`/`toLocaleString` call site in the test suite — no other places hard-code separator characters; `formatETA`, `formatDateInput` etc. assert via `toBeTruthy()` or check translated content.

- **SpoolBuddy kiosk screen-blank timeout setting was ignored after the first save** (reported by maziggy) — Picking a new "Screen Blank Timeout" in SpoolBuddy Settings → Display didn't change the actual blanking behaviour: whatever value was active when the kiosk last booted continued to fire — a user who started with the 10 m preset and then switched to 1 m, 5 m, or "Off" still saw the screen blank at 10 m forever. Cause: blanking is driven by `swayidle`, started once by `spoolbuddy/install/spoolbuddy-idle.sh` at labwc autostart with the timeout passed as a command-line argument (`swayidle -w timeout $T 'wlopm --off' resume 'wlopm --on'`). The script fetched `blank_timeout` from the backend exactly once at startup and `swayidle` has no runtime control surface for changing its timeout. The Python daemon's `display.set_blank_timeout()` updated an in-memory variable on the daemon side that was only used for daemon-side idle bookkeeping (`tick()` log-line) and never reached `swayidle`, so UI changes were silently discarded until the next kiosk restart. Documented as such in the daemon's docstring (`display_control.py:5`: *"swayidle is the sole authority on screen blanking"*) — the architecture predicted the bug, the UX never matched. **Fix:** the wake FIFO at `/tmp/spoolbuddy-wake` now carries a second message in addition to `wake`: `reload-timeout N`. The daemon writes it whenever `set_blank_timeout()` is called with a value that differs from the current one (the very first call is suppressed because the watchdog already fetched the same value at its own startup — signalling there would just thrash `swayidle` on every cold start). The watchdog script's FIFO loop is restructured around `start_swayidle` / `stop_swayidle` helpers and a single `case` statement that dispatches on the message: `wake` → `wlopm --on` + arm a re-blank at the *current* timeout; `reload-timeout N` → kill the running `swayidle`, set `TIMEOUT=$N`, restart `swayidle`, and `wlopm --on` so the user sees the change took effect even if the screen was already blanked. The script de-dupes too — a `reload-timeout N` whose `N` matches the current value is a no-op, so the daemon's local de-dupe and the script's de-dupe both guard against thrash. Going from any positive timeout to `0` ("Off") correctly stops `swayidle` and never restarts it, going from `0` to a positive value starts a fresh `swayidle` — both work without a kiosk restart. The script's main loop opens the FIFO read+write (`exec 3<>"$WAKE_FIFO"`) so the bash `read` never sees EOF when the daemon momentarily disconnects between writes (without that, the loop would exit the first time the daemon closed its write end). A `cleanup` trap on `TERM/INT/HUP` stops `swayidle`, removes the FIFO, and exits cleanly. 7 new tests in `spoolbuddy/tests/test_display_control.py::TestDisplayControlFifoMessages` pin the daemon side of the protocol against a real FIFO in `tmp_path`: `wake()` writes the literal `wake\n` line; first `set_blank_timeout` is suppressed (script already has the right value); subsequent change emits `reload-timeout N\n`; identical-value calls don't signal; transitioning to `0` emits `reload-timeout 0\n` (covers "user picks Off after enabling"); negative inputs are clamped to `0` in the signal payload; missing-FIFO writes are silent no-ops (kiosk-not-running case). Also handles the SpoolBuddy `0` schema default — the first `set_blank_timeout(0)` call from a fresh daemon doesn't signal (init suppressed) so no spurious thrash on a never-configured device.

- **Archive 3MFs (and library file bytes) silently deleted from disk on every print completion** ([#1212](https://github.com/bambuman/bambuddy/issues/1212), reported by @abbasegbeyemi; matches private "file disappeared overnight" reports) — Reprint and View G-code on a freshly-completed archive returned 404 with no log line explaining why; the DB row was intact, the archive grid kept showing the entry, but `archive.file_path` pointed at a path that no longer existed on disk. Same shape independently reported by a daily-build user whose `.gcode.3mf` "disappeared by itself overnight" between Saturday's print and Monday morning's reprint attempt. Root cause was a regression introduced by [#1166](https://github.com/maziggy/bambuddy/issues/1166)'s cover-cache pre-population: the dispatch sites in `background_dispatch.py:692`, `background_dispatch.py:896`, and `print_scheduler.py:1897` started caching the **live archive copy** (and library file bytes for the Direct-Print flow) in the shared 3MF download cache so the `/cover` endpoint could skip a redundant FTP transfer to the printer mid-print. The cache itself was originally designed for transient downloads under `archive_dir/temp/` and `clear_3mf_cache(printer_id, delete_files=True)` — called from `on_print_complete` to keep that temp dir from accumulating — happily `unlink()`'d every cached path. Pre-#1166 every cached path was a temp file, so deletion was correct. Post-#1166 the cleanup was destroying user data: every print → archive 3mf cached → on print complete `clear_3mf_cache` walks the cache → `path.unlink()` on the actual archive copy. The `Path.exists()` guard inside `_maybe_unlink` masked the failure: the file existed at unlink time, so no exception, no warning, just silent destruction. The DB row remained, so the UI listing didn't change — only when the user tried to *act* on the archive (reprint / view-gcode / re-export) did the missing file surface as a 404. Affected every daily build since [`889c8bd8`](https://github.com/bambuman/bambuddy/commit/889c8bd8) (Apr 29). **Fix:** `clear_3mf_cache._maybe_unlink` in `backend/app/services/bambu_ftp.py` now refuses to `unlink()` any path outside `archive_dir/temp` — the cache dict is still cleared either way (so re-cache logic continues to work and the cover endpoint still hits a fresh path on the next print), only the on-disk delete is gated. Persistent locations — `archive/<printer_id>/...`, `archive/unassigned/...` (VP-archived prints with `printer_id=None`), `library_files/...`, and any `is_external` library mount — survive intact. The dispatch sites that cache those paths are unchanged: it's correct for `/cover` to read straight from the live archive copy and avoid the redundant 36 MB FTP transfer; the only bug was the cleanup branch treating all cached paths as transient. Regression test `test_clear_does_not_delete_persistent_files` in `test_bambu_ftp.py` pins the contract end-to-end: an archive 3mf at `archive/1/.../...gcode.3mf`, a library 3mf at `library_files/...`, and a temp 3mf at `archive/temp/...` are all cached for the same printer; after `clear_3mf_cache(1)` runs, all three cache entries are dropped from the dict (so the cache state is consistent), but only the temp file is unlinked from disk — the archive and library files still exist. Two existing cache tests (`test_clear_by_printer_scoped`, `test_clear_without_deleting_files`) updated to put their fixtures under `archive_dir/temp` since that's now the only path the cleanup will touch. **Damage:** users on daily builds since Apr 29 with a `print → wait for completion → reprint or view-3mf later` workflow have been silently losing archive copies. Recovery for individual users: re-import the source 3mf from your slicer / NAS, or re-archive from the printer's FTP if the file is still there. Going forward the bytes are safe.

- **MakerWorld P2S 3MFs failed to slice with "Param values in 3mf/config error: -1 not in range"** ([#1201](https://github.com/maziggy/bambuddy/issues/1201), reported by @inorichi) — Slicing any MakerWorld model sliced for the P2S (e.g. `https://makerworld.com/en/models/1958872`) bombed with `Slicer process failed (exit code 238)` and stderr listing `raft_first_layer_expansion: -1 not in range [0.0, 3.4e+38]` and `tree_support_wall_count: -1 not in range [0.0, 2.0]`. Root cause: BambuStudio writes `"-1"` into `Metadata/project_settings.config` for fields the user wants inherited from the parent process preset — the GUI handles this internally, but the headless CLI (orca-slicer-api / bambu-studio-api sidecar) runs `StaticPrintConfig`'s range validator against the embedded settings *before* the `--load-settings` overrides apply, so the sentinel `"-1"` trips the field's lower-bound check and the CLI exits non-zero before our profile triplet is ever consulted. The `slice_with_profiles` path failed; the fallback to `slice_without_profiles` (which uses embedded settings only) also failed because it reads the same `project_settings.config` and the same validator runs there too. Earlier in the codebase there's a `_strip_3mf_embedded_settings` function that tried to dodge this by removing the entire `project_settings.config` (plus `model_settings.config`, `slice_info.config`, `cut_information.xml`); that experiment was reverted because the strip broke `StaticPrintConfig` initialisation — silent exit-0, no `result.json`, no stderr, masked by the fallback retry which then produced wrong-printer output without telling anyone (the cautionary comment in `library.py:_run_slicer_with_fallback` records the lesson). **Fix is surgical:** new `_sanitize_project_settings_sentinels(zip_bytes)` opens the embedded config, removes only allowlisted keys when their value is exactly `"-1"`, and re-zips. Allowlist (`_PROJECT_SETTINGS_SENTINEL_KEYS`) starts with the two from this report (`raft_first_layer_expansion`, `tree_support_wall_count`) plus `prime_tower_brim_width` (a known sentinel cited in the strip-experiment comment block from earlier reports). Other fields — including non-allowlisted keys that happen to hold `"-1"` (e.g. `z_offset` set to `-1` deliberately by a user) — are left untouched, so a blanket "-1 strip" can't silently corrupt legitimate negative values. The sanitiser runs before *both* the profile-driven path and the embedded-settings fallback, since both fail on the same input. Defensive fallbacks: returns the original bytes unchanged when the input isn't a valid zip, doesn't contain `project_settings.config`, has no allowlisted sentinels present, the JSON is malformed, or the config root isn't a dict — so the caller can pass the result on without further checks. Geometry, thumbnails, color, multi-part data, and every other zip entry round-trip byte-identical (the previous full-strip experiment's failure mode can't reoccur). 13 new unit tests in `test_project_settings_sentinel_sanitiser.py` pin the contract: each allowlisted key removed when value is `"-1"` (parametrised across the allowlist); multiple sentinels removed at once; allowlisted key with legitimate non-sentinel value (`"0"`) preserved; non-allowlisted key holding `"-1"` (`z_offset`) preserved; identity return when nothing needs sanitising; array-form values (per-filament/per-extruder lists) left alone (v1 handles scalar strings only, expand later if needed); other zip entries (model_settings.config, slice_info.config, _rels metadata, geometry) all preserved with byte-identical content; non-zip input passes through; missing `project_settings.config` passes through; malformed JSON passes through; non-dict JSON root passes through. **Adding new sentinel keys:** if a future report surfaces another field name in the slicer's `<field>: -1 not in range [...]` error, add the field to `_PROJECT_SETTINGS_SENTINEL_KEYS` — the rest of the code stays unchanged.

- **Archive created with wrong plate metadata when consecutive plates of the same model are printed back-to-back** ([#1204](https://github.com/maziggy/bambuddy/issues/1204), reported by @BurntOutHylian) — Print Plate 2 of any multi-plate project, let it complete, then immediately print Plate 1: the resulting archive was named "MyModel - Plate 2" with Plate 2's filament slots and slicer estimate, even though Plate 1 was the print actually running. Root cause was an MQTT lag in the `print_start` data: the trigger fires on a `gcode_file` change (`bambu_mqtt.py:2781-2786` — the field carrying `/data/Metadata/plate_N.gcode`, which is plate-specific and always fresh), but `subtask_name` (model-level, e.g. "MyModel - Plate 2") can still echo the previous job in the same MQTT batch. The FTP candidate list in `main.py:1974` is built from `subtask_name` first, so the previous Plate 2 upload — still resident on the printer's FTP from the just-completed print — got picked up and fed into archive creation. The 3MF parser then read `_plate_index=2` from the wrong file's `slice_info.config` and locked Plate 2's name + estimate + per-slot filament data into the row at creation, with no follow-up to correct. Reporter @BurntOutHylian's diagnosis nailed it: the parser already extracts `_plate_index` from inside the 3MF (`archive.py:154`), and `parse_plate_id()` (`printer_manager.py:678`) already extracts the plate from `gcode_file` — those two values just weren't being compared. **Fix:** new helpers `peek_plate_index_in_3mf()` (cheap zip read of `Metadata/slice_info.config` only, returning the plate index) and `swap_plate_suffix()` (rewrites trailing " - Plate N" or "_plate_N" — both forms appear in real subtask_names, see `test_print_start_expected_promotion`) in `archive.py`. After a successful FTP download in `_handle_print_start`, the new validation block in `main.py` peeks the downloaded 3MF's plate index, compares against `parse_plate_id(filename)`, and on mismatch retries the FTP fetch with a corrected `subtask_name`. If the retry finds a 3MF whose plate matches, the wrong file is dropped and the corrected one is used — archive name + estimate + slots all reflect the actual plate. If the retry can't find a matching file (or no swap is possible because `subtask_name` had no plate suffix to swap), the wrong 3MF is dropped and the existing no-3MF fallback (`main.py:2155`) creates an archive without metadata; the stale `subtask_name` is overridden to the corrected one (or cleared so `filename` wins) so the fallback's `print_name` at least reflects the right plate rather than locking in a misleading name. The validation only fires when `parse_plate_id(filename)` returns a value, so single-plate / non-Bambu / cloud-named jobs are unaffected. **Defence in depth:** the cache eviction is implicit — `temp_path.unlink()` makes the wrong-file cache entry self-clean on next access via the existing `get_cached_3mf` evict-on-miss path (`bambu_ftp.py:660-664`); no separate cache invalidation needed. 17 new unit tests in `test_archive_plate_validation.py` pin the helpers: `peek_plate_index_in_3mf` returns the index for a valid 3MF, None for missing slice_info, None for missing index metadata, None for non-zip files, None for missing files, None for non-integer index values; `swap_plate_suffix` handles the spaced "Plate N" form (capitalised + lowercase + tight-hyphen), the underscored "_plate_N" form (the `Box3.0_(2)_plate_5` case from the existing fixture), case-insensitive matching, returns None for names without a recognised suffix, returns None for None input, and preserves separator casing so the corrected name matches what BambuStudio actually uploaded.

- **SpoolBuddy kiosk screen never blanked while a load cell was producing noisy readings** (reported during user testing) — A noisy HX711 / load-cell mount that bounced the reported weight by ≥50 g around its midpoint kept the kiosk display permanently lit. The wake gate in `spoolbuddy/daemon/main.py:scale_poll_loop` (`WAKE_THRESHOLD = 50`) checked the absolute change against `last_wake_grams` and, on every trip, advanced `last_wake_grams` to the new noisy reading — so the next bounce back also exceeded the threshold, fired `display.wake()` again, and the screen never stayed off long enough for swayidle's `wlopm --off HDMI-A-1` to mean anything. Symptom in the field: ~3–30 s between `Wake signal sent via FIFO` log lines, exactly correlated with the bigger noise spikes, screen flicker-blanking and immediately turning back on. Diagnosis from a real device's `journalctl -u spoolbuddy.service`: `scale/reading` POSTs every ~1 s (REPORT_THRESHOLD=2 g, so the load cell was reporting ≥2 g changes constantly) interleaved with periodic wake signals. **Fix**: the wake gate now requires the scale's `stable` flag (True only when consecutive readings agree within 2 g over a 1 s window — already produced by `ScaleReader.read()` and previously only forwarded as telemetry to the backend). Unstable noise can no longer fire wake AND can no longer poison `last_wake_grams`, since the threshold check + the assignment are both gated on `stable`. Real spool placements / removals produce a settled post-event reading and continue to wake the screen as intended. 3 new regression tests in `spoolbuddy/tests/test_main.py::TestScalePollLoopWakeGating`: noisy ±60 g unstable readings never wake (the original bug); a settled >50 g jump wakes; a noise burst between two settled readings doesn't poison `last_wake_grams` (asserts the second stable wake still fires from the *original* baseline rather than the noisy peak).

- **Print-complete notification reported the slicer's pre-print estimate instead of the actual elapsed time** ([#1198](https://github.com/maziggy/bambuddy/issues/1198), reported by @BurntOutHylian) — `_background_notifications` in `main.py:3434` built `archive_data` for the completion notification with `print_time_seconds` (the slicer's estimate parsed from the 3MF at archive creation), and `notification_service.py:909-910` then formatted that field straight into the `{{duration}}` template variable. Net effect: a print cancelled 2 minutes into a 3-hour estimate told the user "duration: 3h" — wrong by orders of magnitude for any cancellation, abort, slow first layer, or any print whose actual elapsed diverged from the slicer's guess. The companion field `actual_filament_grams` was already scaled by progress for partial prints (line 3445), so filament was right while time was wrong. The `print_start` notification uses a separate `{{estimated_time}}` variable (line 838), so `{{duration}}` semantically should always have meant "actual elapsed" — it was just being read from the wrong source. **Two-part fix:** **(1)** `main.py:3434` now computes `actual_time_seconds = int((archive.completed_at - archive.started_at).total_seconds())` from the persisted timestamps when both are present and the elapsed is positive, and adds it as a new key in `archive_data`; `notification_service.py:909-916` prefers `actual_time_seconds` and falls back to `print_time_seconds` only when timestamps weren't recorded (so the notification still has *something* if the elapsed can't be derived). **(2)** `main.py:3172` adds `"cancelled"` to the set of statuses that get `completed_at` set when `update_archive_status` runs — pre-fix only `completed`, `failed`, `aborted` got a timestamp, but `cancelled` (Bambuddy queue UI cancellation, distinct from touchscreen-aborts which already set `completed_at`) was deliberately excluded for reasons that no longer hold. Audited every `completed_at` consumer in backend (`archives.py:80, 333-337, 768-770, 723-731, 1722-1813`, `main.py:3229`, `projects.py:1475, 1489`) and frontend (`PrintersPage.tsx:2854`, `QueuePage.tsx:1053`, `StatsPage.tsx:902`); none rely on `completed_at IS NULL` to mean "this is a cancelled print" — the three explicit-status filters already restrict to `status == "completed"` and the rest are `completed_at or created_at` fallback expressions that gracefully accept either. Knock-on benefit: the statistics-totals aggregation at `archives.py:723-731` (which currently adds the *full* slicer estimate to the total when `completed_at IS NULL`) now adds the actual elapsed for cancelled prints too — a 2-minute cancellation contributes 2 minutes instead of 3 hours. Existing cancelled rows in the DB stay with `completed_at=NULL`; only new cancellations going forward get the timestamp. 3 new regression tests in `test_notification_service.py::TestNotificationVariableFallbacks` pin the contract: `{{duration}}` reflects `actual_time_seconds` when present (2m elapsed wins over 3h estimate), falls back to `print_time_seconds` when actual is missing (1h estimate still surfaced rather than "Unknown"), and surfaces "Unknown" when both are absent.

- **Frontend served behind a path-prefixed reverse proxy (e.g. `/bambuddy/` on Traefik / nginx / Cloudflare Tunnel) loaded a blank page** ([#1195](https://github.com/maziggy/bambuddy/issues/1195), reported by @Spegeli, follow-up to [#1167](https://github.com/maziggy/bambuddy/issues/1167)) — Vite's default `base: '/'` emits absolute asset URLs in the built `index.html` (`/assets/index-*.js`, `/assets/index-*.css`, `/manifest.json`, `/img/...`, `/sw-register.js`), which assumes the SPA is always served at the host root. Behind any path-prefixed reverse proxy — Traefik with a path prefix, nginx `location /bambuddy/`, Cloudflare Tunnel with path routing, Synology / Unraid reverse-proxy panels — the browser then requests those absolute paths from the host root, the proxy doesn't see them, and the upstream serves either a 404 or HTML for an unknown path with `Content-Type: text/plain`/`text/html`; the browser logs `Refused to apply style from '.../assets/index-*.css' because its MIME type is 'text/plain'` and renders a blank white page. Two-line fix: `frontend/vite.config.ts` sets `base: ''` so Vite's HTML transform rewrites every absolute asset reference to relative (`./assets/...`, `./manifest.json`, `./img/...`, `./sw-register.js`) — these resolve correctly against whatever subpath the document was served from. `frontend/public/sw-register.js` is a public-dir file Vite copies as-is, so its `navigator.serviceWorker.register('/sw.js')` call is changed to `register('sw.js')` (relative); the SW scope is automatically pinned to whatever subpath the document loaded from, which is exactly what every reverse-proxy-at-subpath user wants. Net effect: an `https://example.com/bambuddy/` deployment now loads correctly without any frontend rebuild on the user's side. **Out of scope for this change:** runtime API base detection — `API_BASE = '/api/v1'` in `frontend/src/api/client.ts` is still absolute, so API calls still go to the host root. This is intentional. The fix above closes the immediate "blank page" report; making the API base, React Router basename, PWA manifest scope, and service-worker scope all subpath-aware would mean rewriting how the SPA bootstraps and would touch PWA-install state, push-notification subscriptions, and deep-link reload semantics. The supported way to embed Bambuddy in Home Assistant remains the **Webpage panel + `TRUSTED_FRAME_ORIGINS`** path documented in the wiki — Bambuddy reachable on a stable URL (HTTP for HTTP-only HA, HTTPS via your own reverse proxy for HTTPS HA / Nabu Casa / custom-domain), iframe-embedded via the HA dashboard. HA Ingress / addon-based subpath embedding (which would require the runtime path detection above) is not supported by core. Documented explicitly in `docker.md` so users hit the right pattern first.

- **iframe embedding from trusted origins (e.g. Home Assistant Webpage panel) no longer blocked** ([#1191](https://github.com/maziggy/bambuddy/issues/1191), reported by @azurusnova) — Bambuddy ships strict anti-clickjacking headers (`X-Frame-Options: SAMEORIGIN` and CSP `frame-ancestors 'none'`) by default, which protects internet-exposed deployments from being embedded by hostile sites. But it also broke a documented integration path: Home Assistant's Webpage dashboard panel embeds Bambuddy via `<iframe>` on a different origin (HA on `:8123`, Bambuddy on `:8000`), and the SAMEORIGIN value is port-strict, so even same-LAN trusted setups got "refused to connect". A new `TRUSTED_FRAME_ORIGINS` env var takes a comma-separated list of `scheme://host[:port]` origins; when set, the middleware drops `X-Frame-Options` (modern browsers honor `frame-ancestors`, and the legacy `ALLOW-FROM <url>` syntax is deprecated and inconsistent across vendors) and the CSP `frame-ancestors` directive becomes `'self' <origin> <origin>...`. The default — empty env var — keeps the strict `'none'` behavior, so Docker / bare-metal users without HA see no behavioural change. Origin validation happens at startup: only `http://` and `https://` are accepted, paths/query/fragments/wildcards are rejected with a warning (one bad entry doesn't take the deployment down — it's just dropped from the allowlist). The `gcode-viewer` route's `frame-ancestors 'self'` (same-origin embed for the in-app gcode preview iframe) also includes the allowlist when configured, so HA users embedding Bambuddy can still open the gcode viewer modal. 16 new tests in `test_security_headers.py`: 12 unit tests for the env-var parser (empty / unset / single / multiple / whitespace / empty-segment / non-http scheme dropped / missing host dropped / path dropped / query+fragment dropped / wildcard dropped / trailing-slash kept) and 4 integration tests for the middleware (default-strict emits SAMEORIGIN + 'none', allowlist relaxes CSP and drops X-Frame-Options, /docs branch also honors the allowlist, other security headers like X-Content-Type-Options and Referrer-Policy are unaffected in both modes). Documented in the Docker env-var reference page on the wiki and in `.env.example`.

- **Virtual Printer queue mode auto-dispatched onto the wrong colour when multiple compatible printers were available** ([#1188](https://github.com/maziggy/bambuddy/issues/1188), reported by @EdwardChamberlain) — Sending a sliced 3MF to a queue-mode VP via Orca / Studio with auto-dispatch on caused Bambuddy to schedule the job onto a printer of the right model but the wrong loaded filament: a print sliced for matte white PLA would land on a printer with no white loaded, and the printer would start the job using whatever was the closest available match. Edward's diagnosis was exact (`virtual_printer/manager.py:325-326`): the manual /api/v1/print-queue/ POST flow extracts the 3MF's per-slot filament requirements at queue-add time and writes `required_filament_types`, `filament_overrides`, and `ams_mapping` on the resulting `PrintQueueItem`, so the scheduler's color-match enforcement (`print_scheduler.py:512` — keys on `filament_overrides[].force_color_match === true`) actually runs. The VP queue-write path (`_add_to_print_queue`) skipped all of that and built a bare `PrintQueueItem` with only `printer_id`, `target_model`, `archive_id`, `plate_id`, `position`, `status`, `manual_start`. Net effect: the scheduler reached the model-only-matching fallback and accepted the first available printer of the target model regardless of loaded colour, exactly as he described. **Fix:** the scheduler's existing `_get_filament_requirements` 3MF parser is extracted into a shared helper (`backend/app/services/filament_requirements.py:extract_filament_requirements`) so the VP path can reuse it at upload time. The VP's `_add_to_print_queue` now calls that helper after archiving and populates `required_filament_types` unconditionally (cheap; helps the scheduler reject obvious type mismatches even without `force_color_match`); and writes `filament_overrides` with `force_color_match: true` per consumed slot when a new per-VP setting `queue_force_color_match` is on. Default is **off** to preserve current behaviour for upgraders — a fresh-install user who wants the bug-free behaviour flips the toggle once on the VP card; an existing user gets exactly the model-only-matching they had before until they opt in. Auto-dispatch onto the wrong material happens loudly enough that anyone affected can find the toggle. **Why default-off** rather than default-on: existing automation that relies on "send to queue VP, get printed somewhere" without caring about colour shouldn't silently start blocking on colour matching after an upgrade. The toggle has clear UI copy (`virtualPrinter.queueForceColorMatch`) explaining the trade-off. **Defence in depth:** a malformed or unparseable 3MF (e.g. fake bytes from a misconfigured upload tool) leaves both fields None and the scheduler falls back to model-only matching, matching pre-fix behaviour for the unhappy path. The scheduler itself is unchanged — it already handled `force_color_match` correctly when the field was populated; the bug was purely the VP path not populating it. **Schema:** one nullable column `virtual_printers.queue_force_color_match BOOLEAN DEFAULT 0/FALSE` (Postgres-safe) added via the existing `_safe_execute` migration pattern. **API:** `VirtualPrinterCreate` and `VirtualPrinterUpdate` Pydantic schemas + `_vp_to_dict` response shape carry `queue_force_color_match`, the create + update routes wire it through to the model, and `VirtualPrinterInstance` constructor + `multiVirtualPrinterApi` TypeScript client mirror the field. **UI:** new toggle on `VirtualPrinterCard` rendered only when `mode === 'print_queue'` (parallels the existing `auto_dispatch` toggle's mode-gating), with `pendingAction` state for the in-flight indicator. **i18n:** new `virtualPrinter.queueForceColorMatch.{title,description}` keys in all 8 locales — English fully translated, German fully translated, the other 6 locales seeded with English copy pending native translation (matches the project's existing flow for newly-added user-facing features). 11 new tests: 8 in `test_filament_requirements.py` covering the extracted parser end-to-end (per-slot dicts, zero-use slots filtered, plate filtering, no-plate flat-walk fallback, unparseable / missing / config-less files, sorted output); 3 in `test_virtual_printer.py::TestVirtualPrinterInstance` covering the VP write path (setting-off → only `required_filament_types` populated; setting-on → `filament_overrides` populated with `force_color_match: true` per slot; unparseable 3MF → both fields None, no crash). Existing scheduler tests still pass against the refactored helper (verified end-to-end across the scheduler / virtual_printer / print_queue / filament test suites — 479 tests). Edward's "out of scope nice-to-have" suggestion of a "Requires Color Match" pill on queue cards is deferred to a follow-up so this PR stays scoped to his repro.

- **Slicing a library file via API key fails with "no Bambu Cloud session is stored" even when the key has cloud access** ([#1182](https://github.com/maziggy/bambuddy/issues/1182) follow-up, reported by @turulix) — Tim shipped the headless slicing pipeline #1182 was filed for, then hit a second wall: `GET /api/v1/cloud/settings` returned the cloud preset IDs correctly (the `/cloud/*` router-level gate from #1182 was doing its job), but `POST /api/v1/library/files/{id}/slice` with those IDs in the request body failed the slice job with `error_status: 400, error_detail: "Cloud preset selected for printer, but no Bambu Cloud session is stored. Sign in to Bambu Cloud and retry."` Cause: the `/cloud/*` fix routes the API key's owner User through `cloud_caller` (a router-level gate stashes the owner on `request.state.api_key_owner`, route-level deps pull it back out), but the slice route lives on `/library/*` — different router, no gate, so when the auth dep returned `None` for the API-keyed request the slice route passed `current_user_id=None` straight through to `_run_slicer_with_fallback` → `_resolve_cloud(db, user=None)` → `get_stored_token(db, None)`, which falls back to the auth-disabled global `Settings` table. That table is empty in auth-enabled deployments, so cloud preset resolution failed even though the key's owner User had a perfectly valid `cloud_token` on their User row. Fix is a new route-level dep `resolve_api_key_cloud_owner` in `cloud.py` that's permissive (returns the owner User if the key has `can_access_cloud=true`, otherwise None — never raises) so it can be safely added to non-`/cloud/*` routes without breaking the local-presets path: a request with an API key that lacks the cloud scope still slices fine against local presets, and only fails with the existing "no Bambu Cloud session" error if it actually selects a cloud preset. Wired into `POST /library/files/{id}/slice` (Tim's blocker) and `GET /slicer/presets` (the SliceModal preset dropdown source — same root cause, would have hit anyone using the UI through an API-keyed reverse proxy). Both routes now resolve the cloud-token owner via `current_user or api_key_cloud_owner` instead of `current_user.id if current_user else None`. The auth gate's None-return for API keys is unchanged — keeping that fix scoped to the routes that actually need cloud-token resolution prevents accidental scope creep into other routes that fence on `current_user is None`. 4 new integration tests in `test_api_key_cloud_access.py::TestSliceRouteCloudOwnerResolution` pin the dep contract: returns the owner for a key with `can_access_cloud=True` and a valid owner; returns None for an owned key without the cloud scope (so cloud presets still 400 cleanly, local presets still slice); returns None for legacy ownerless keys; no-op for JWT and anonymous callers.

- **Project cover photo thumbnail too small to recognise the print** ([#1155](https://github.com/maziggy/bambuddy/issues/1155) follow-up, reported by @smandon) — The 40×40 thumbnail @smandon's MakerWorld download workflow relied on for "is this the model I'm looking for?" wasn't readable at that size; he asked for either a larger thumbnail or a click-to-enlarge full preview. Enlarging the thumbnail itself would shift the card layout and cost the dense grid he chose to use for browsing many projects, so the fix keeps the 40×40 thumbnail and shows a portal-mounted 384×384 popover on hover. The popover renders the full image in `object-contain` so tall portrait MakerWorld photos aren't cropped to a square, has `pointer-events-none` so it can't intercept hover and create a flicker loop, and `z-[100]` so it stacks above every sibling card in the grid. **Why a portal:** ProjectCard carries `overflow-hidden` (for its rounded-corner clipping and the color accent bar), so an in-tree popover gets clipped by the card the moment it extends past the card's bounds — exactly the cut-off behaviour @smandon reported on the second iteration. Rendering via `createPortal(..., document.body)` escapes every ancestor clipping context, and `position: fixed` with measurements from `getBoundingClientRect()` keeps the popover pinned next to the thumbnail regardless of where the card sits in the grid. **Edge handling:** if the thumbnail is near the viewport's right edge the popover flips to the LEFT side of the thumbnail; vertical position is clamped so the popover never overflows the window top or bottom. The thumbnail's own `onClick` is `stopPropagation`'d so hovering the popover area never accidentally triggers the parent card's "open project" navigation. 2 new tests in `ProjectsPage.test.tsx` pin the contract: hovering mounts the popover at document.body level (not nested in the card — a future refactor that drops the portal would re-introduce the clipping bug, and the test catches that); leaving unmounts it; the popover img points at the same cover-image URL as the small thumbnail with `object-contain`; cards without a cover_image_filename never mount the portal-rendering component (so a hover doesn't flash an empty preview).

- **Spool edit form lost the Extra Colours value on reopen, Dual Color rendered identically to Gradient, and the Sparkle / checkerboard visuals were too subtle** ([#1154](https://github.com/maziggy/bambuddy/issues/1154) follow-up, reported by @maugsburger) — Four issues against the multi-colour swatch work that landed for #1154. **(1) Extra Colours input didn't hydrate on edit reopen:** `ColorSection`'s draft buffer was seeded once via `useState(formData.extra_colors)`, but `SpoolFormModal` opens *before* its own `useEffect` populates `formData` from the spool record — so by the time the saved value landed, the input's local state had already been initialised to `''` and never re-synced. The COLOR preview banner above the input rendered correctly (consumes formData directly), making it obvious the data WAS persisted; only the input was stuck blank, which the user then had to retype to save anything else. Fix: a ref-guarded `useEffect` resyncs `extraColorsDraft` when `formData.extra_colors` changes via an external update (e.g. modal opening with a spool); the ref is updated inside `commitExtraColors` so the user's own typing is round-tripped without the resync clobbering it. **(2) `Dual Color` and `Gradient` produced the same diagonal blend:** `buildColorLayer` in `filamentSwatchHelpers.ts` ran the same `linear-gradient(135deg, ...)` for both effect types, so a "Dual Color" spool was visually indistinguishable from a "Gradient" one. Real dual-colour spools have two distinct bars on the reel — that's the whole point of the variant. Fix: when `effect_type` is `dual-color` or `tri-color`, build the colour layer as `linear-gradient(to right, c1 0% X%, c2 X% Y%, ...)` with CSS double-position stops (so the colour change is a *hard line* rather than a blend region) and equal-width segments across the stops; `gradient` keeps the original 135° smooth blend. The existing `multicolor` conic-gradient path is untouched. **(3) Sparkle effect was almost invisible on card-sized swatches:** the original 4-dot pattern (each ~1px) read fine on the small inline swatch but disappeared on the 60-pixel-tall inventory card banners — exactly where the user actually identifies a spool. Bumped to 13 flecks in mixed sizes (1px / 1.5px / 2px) and varying opacity (0.65 → 1.0) to give a depth-of-field "metal flake" feeling, distinct from solid + multi-colour. **(4) Checkerboard cell density scaled with the swatch:** the previous helper put `repeating-conic-gradient(...)` in the `background-image` and the caller applied `background-size: cover`, so the same 4-cell pattern was either tiny squares on a small swatch or four huge squares on a card-sized banner. Made `buildFilamentBackground()` return `{ backgroundImage, backgroundSize }` with per-layer sizes — painted layers stay `cover`, the checkerboard gets a fixed 12px tile so the cell density stays consistent regardless of element size and clearly reads as a transparency indicator rather than a multi-colour stripe. Updated the three existing call sites (`InventoryPage` group banner + spool card, `ColorSection` preview) to spread the returned style object directly. **8 new frontend tests** cover the four fixes: hard-split contract for Dual/Tri Color (3 tests + 1 regression guard that Dual ≠ Gradient for the same stops); Sparkle prominence (≥ 10 distinct radial-gradient layers in the rendered background); checkerboard density (last `backgroundSize` layer is a fixed pixel value, not `cover`); 4 hydration tests pinning the input restore path (fills when formData arrives via parent update, resyncs when the spool changes mid-form, doesn't clobber live user typing, clears when the new spool has no extra_colors).

- **Pending review card and the resulting archive name disagreed; `.gcode.3mf` filename suffix wasn't fully stripped** ([#1152](https://github.com/maziggy/bambuddy/issues/1152) follow-up, reported by @smandon) — Two distinct holes in the original #1152 fix surfaced when @smandon retested on the daily build. **(1) Suffix stripping was incomplete:** Bambu Studio's "Send to printer" dialog typically writes files like `Plate_1.gcode.3mf` (a sliced gcode payload wrapped in a 3MF container), but the archive's display stem was computed via `Path(name).stem`, which only drops the *last* suffix and left the user staring at `Plate_1.gcode` in the archive UI. **(2) The review card and the archive disagreed on what the print was called:** the pending-uploads panel always rendered the raw FTP filename, while the eventual `PrintArchive.print_name` resolved from the 3MF's embedded title (or, with the toggle on `filename`, the filename stem). Net effect: the user saw `Plate_1.gcode` in the review card and `Some Creator's Title` in the archive grid for the same item, with no toggle that flipped both views in lockstep. Fix has three pieces: a new `resolve_display_stem()` helper in `archive.py` that strips `.gcode.3mf` / `.3mf` / `.gcode` (case-insensitive) so both the archive *and* the review-side normalisation produce the same canonical stem; a new `PendingUpload.metadata_print_name` column populated at FTP-receive time by peeking at the 3MF's embedded title (so `/pending-uploads/` list calls don't have to reopen every 3MF on every render); and a new `PendingUploadResponse.display_name` computed field that mirrors `archive_print`'s exact precedence — `filename` toggle: stripped stem; `metadata` toggle (default): cached title or stripped stem. Frontend's `PendingUploadsPanel` reads `upload.display_name` (with `upload.filename` as a defensive fallback for any pre-migration row), and the raw filename is exposed as a tooltip so users can still inspect what actually arrived over FTP. Migration is one idempotent `ALTER TABLE pending_uploads ADD COLUMN metadata_print_name VARCHAR(255)` (Postgres/SQLite-safe); existing pending rows have NULL there and gracefully fall back to filename-stem behaviour. 14 unit tests pin the stripping rules (`Plate_1.gcode.3mf` → `Plate_1`, mixed case, dots in the middle, edge `.3mf`-only / `.gcode`-only, full-path inputs); 6 integration tests pin the response contract (default toggle uses metadata title when present, falls back to stripped stem when absent, `filename` toggle overrides metadata, `filename` toggle still strips the double suffix, `GET /{id}` exposes the same field, whitespace-only metadata behaves like absent); 3 frontend tests pin the review card's render path (resolved name shown, fallback to filename when display_name is empty, raw filename available via tooltip).

- **SpoolBuddy SSH update fails with "permission denied for user spoolbuddy" after Bambuddy keypair rotation** (reported during user testing) — Bambuddy's data dir at `<DATA_DIR>/spoolbuddy/ssh/` can get recreated outside the daemon's control (volume remount, container recreate, fresh deploy), at which point `get_or_create_keypair()` generates a new ed25519 keypair. The SpoolBuddy daemon previously only fetched and deployed Bambuddy's public key at registration time (`/devices/register`), so any rotation after a successful registration left the device's `~/.ssh/authorized_keys` pointing at a defunct public half — every "Update" click from the Bambuddy UI then failed with `Connection closed by authenticating user spoolbuddy [preauth]` until the daemon was restarted manually. Worse, every prior successful registration appended a fresh entry to `authorized_keys` without ever pruning the old one, so a typical device accumulated 5+ stale Bambuddy-tagged keys (each one a permanent backdoor for whichever Bambuddy keypair held the matching private half at the time it was deployed). Two-pronged fix: **(1)** the heartbeat response (`HeartbeatResponse`, `routes/spoolbuddy.py:282`) now carries the current `ssh_public_key` alongside the existing `pending_command` / calibration fields, so the daemon's heartbeat picks up a key rotation within one cycle instead of needing a service restart; the same `try/except Exception: pass` pattern as the registration response keeps a missing/unreadable backend key from breaking telemetry. **(2)** `_deploy_ssh_key()` in `daemon/main.py` now syncs rather than appends — it strips every line tagged `bambuddy-spoolbuddy`, writes the current key once, and is a no-op when already in sync (so it doesn't churn the file every heartbeat). User-managed entries (any line not tagged `bambuddy-spoolbuddy`) are preserved untouched. 5 new unit tests in `spoolbuddy/tests/test_deploy_ssh_key.py` (creates-when-missing → mode-600 file with the current key; pile-up-of-stale-keys → only current key remains, no growth; preserves-unrelated-user-keys → user's own SSH access untouched; idempotent-when-in-sync → no mtime change so heartbeat doesn't churn the file; swallows-write-errors → readonly-fs PermissionError doesn't crash the heartbeat loop). 2 new backend integration tests in `test_spoolbuddy.py::TestDeviceEndpoints` — `test_heartbeat_returns_ssh_public_key` (response carries the key on every heartbeat) and `test_heartbeat_ssh_key_failure_does_not_break_heartbeat` (backend key-read failure leaves `ssh_public_key: None` but the heartbeat still 200s).

- **External-camera frames returned as black on go2rtc and other MJPEG sources** ([#1177](https://github.com/maziggy/bambuddy/issues/1177), reported by @nkm8) — `_capture_mjpeg_frame` returned the very first JPEG it found in the stream's bytes (`backend/app/services/external_camera.py:282`), but many MJPEG sources — go2rtc most notably, and several IP cameras — emit a "warm-up" frame on the byte that follows connection accept: usually the last keyframe held in the encoder, which is often black or stale until the encoder catches up to live content. Subsequent frames on the same connection are fine. The reporter saw it across snapshot UX, finish photos in notifications, and timelapse — every code path that opens a fresh capture connection (snapshot endpoint, `[PHOTO-BG]` finish photo, plate-detection CV, Obico ML inference, layer timelapse, Settings → Test). His own observation that go2rtc's `/api/frame.jpeg` (single-frame, internally already warmed) is never black while the first frame off `/api/stream.mjpeg` is, matched the hypothesis exactly. Support-bundle evidence was clean: every black notification frame in his log was 11095 bytes (a pure-black 1280×720 JPEG encodes to ~10–15 KB on standard libjpeg quality settings), while every captured-after-warm-up frame from the same source was 30–45 KB. Fix: read past the first frame and return the second; if the connection closes / times out / hits the 5 MB buffer cap before a second frame ever arrives, fall back to the first so callers still get *something* (degrading slow / single-frame streams to None would regress every code path that relied on pre-fix behaviour). The inner-loop now drains every complete frame already in the buffer before pulling the next chunk so high-FPS sources that pack multiple frames per chunk are handled correctly. The `snapshot` / `rtsp` / `usb` capture paths and the live-view streaming endpoint (`generate_mjpeg_stream`) are untouched. 7 new regression tests in `test_external_camera.py::TestCaptureMjpegFrameWarmupSkip` cover (a) two-frames-in-two-chunks → second returned, (b) two-frames-in-one-chunk → second returned, (c) frame split across chunk boundary → assembled correctly, (d) single-frame stream → first returned via fallback (no None regression), (e) timeout after first frame → first returned via fallback, (f) zero-frame stream → None, (g) non-200 status → None. Latency penalty: at most one frame interval (typically 50 ms – 1 s on a steady stream). **Follow-up: optional snapshot URL override** — @nkm8 retested on the daily build and saw the warm-up skip help most of the time but the black-frame symptom still surfaced intermittently on his go2rtc setup, with the same workflow break (notification thumbnails black, snapshot UX black). His own bisect already pointed at the cleanest fix: go2rtc exposes `/api/frame.jpeg` as a dedicated single-frame endpoint that *never* returns the encoder's warm-up keyframe, while `/api/stream.mjpeg` always does on a fresh connection. New optional `external_camera_snapshot_url` column on `printers` (idempotent `ALTER TABLE` migration via `_safe_execute`, plumbed through `PrinterBase` / `PrinterUpdate` / `PrinterResponse` / `from_orm_with_roi` / TypeScript `Printer` + `PrinterCreate`); when set, every single-frame capture path (`/api/v1/printers/{id}/camera/snapshot`, `[SNAPSHOT]` notification thumbnails, `[PHOTO-BG]` finish photo, layer timelapse on every captured layer, Obico ML snapshot, plate-detect / calibrate-plate CV) routes through `_capture_snapshot()` on the override URL via plain HTTP GET, bypassing the warm-up-frame dance entirely. The override is camera-type-agnostic — set it once on the printer config and it applies regardless of whether the live stream is mjpeg / rtsp / usb. Live-view (the `/camera/stream` and `/camera` endpoints powering the in-app viewer) deliberately stays on the configured stream URL — the override only changes single-frame captures, since a 1 fps poll-the-snapshot-endpoint live view would be a regression for everyone who doesn't have this problem. Settings UI (Settings → General → External Cameras) renders a new "Snapshot URL (optional)" input with its own Test button below the live-stream URL row; the input is hidden when `camera_type === 'snapshot'` since the live URL is already a single-frame endpoint and the override would be redundant. SSRF guard on the override is the existing `_sanitize_camera_url("http", "https")` allowlist — link-local / metadata / blocked hosts return None instead of being fetched. Empty-string override is treated as unset (defence in depth — a stale config row that somehow has `""` rather than `NULL` still routes through the live stream rather than firing GET against an empty URL). 5 new backend tests in `test_external_camera.py::TestSnapshotUrlOverride` (override routes to snapshot path; no override → camera-type handler; empty string → camera-type handler; SSRF guard on metadata-target override returns None; override is camera-type-agnostic across rtsp/usb). 3 new frontend tests in `SettingsPage.test.tsx` (input renders for mjpeg/rtsp/usb camera types; hidden for snapshot type; debounced PATCH carries `external_camera_snapshot_url` when the user types). i18n: `settings.cameraSnapshotUrl{,Placeholder,Help}` in en + de fully translated, the other 6 locales (fr/it/ja/pt-BR/zh-CN/zh-TW) seeded with English copies pending native translation. Documented under `bambuddy-wiki/docs/features/camera.md` with the go2rtc example URL as a tip block.

- **MakerWorld sidebar entry visible to every user regardless of group permissions** ([#1175](https://github.com/maziggy/bambuddy/issues/1175)) — Backend already enforced `makerworld:view` on every `/makerworld/*` route (`backend/app/api/routes/makerworld.py:145, 157, 242, 406`), the permission was correctly granted to the admin and standard-user role defaults (`permissions.py:298, 364, 454`), and the frontend `Permission` type union already included `'makerworld:view' | 'makerworld:import'` (`client.ts:2498`) — but the sidebar's hand-maintained `navPermissions` map in `Layout.tsx:278` had no entry for `makerworld`, so `isHidden('makerworld')` always returned false and the entry rendered for every authenticated user. Users without the permission saw the entry, clicked, and the page rendered while every API call inside it 403'd. Two-line fix: (1) `Layout.tsx:278` — add `makerworld: 'makerworld:view'` to the map, matching every other sidebar entry's gating shape; (2) `App.tsx:200` — wrap the route in `<PermissionRoute permission="makerworld:view">` for defence in depth, so a user who knows the URL can no longer reach the page directly (matches the existing pattern on `settings`, `groups/new`, `groups/:id/edit` two lines below). 2 new Layout tests pin the contract: with auth enabled and a user lacking `makerworld:view`, the sidebar `<a href="/makerworld">` link is absent (other links like `/files` still render); with the permission granted, the link renders.

- **Printer Info modal: serial-number and IP-address copy buttons silently did nothing on plain-HTTP LAN deployments** ([#1174](https://github.com/maziggy/bambuddy/issues/1174), reported by @BurntOutHylian) — `PrinterInfoModal`'s `CopyButton` only tried `navigator.clipboard.writeText()`, which is gated by the secure-context requirement (HTTPS or localhost). On the typical Bambuddy deployment shape — bare-IP HTTP on the LAN — `navigator.clipboard` is undefined; the existing `try/catch` swallowed the resulting `TypeError`, the icon never flipped to the tick, and nothing landed on the user's clipboard. Fixed by adding the same off-screen-textarea + `document.execCommand('copy')` fallback that `CameraTokensPage`'s plaintext-token modal already uses for plain-HTTP LAN deployments: gate on `navigator.clipboard && window.isSecureContext`, fall back to the legacy path otherwise, and surface the success-tick only when the copy actually landed (return early without flipping `copied` if `execCommand('copy')` returns false). The `try/finally` around the textarea guarantees DOM cleanup even when the browser throws on a restricted context. 3 new component tests in `PrinterInfoModal.test.tsx` cover (a) secure-context happy path uses `navigator.clipboard.writeText`, (b) plain-HTTP fallback path actually invokes `execCommand('copy')` and leaves no leaked textarea in the DOM, (c) `finally` cleanup removes the textarea even when `execCommand` throws synthetically. Thanks to @BurntOutHylian for the precise file/line pointer in the report.

- **Queue auto-dispatched the next print onto a fouled bed after an aborted or cancelled print** ([#1171](https://github.com/maziggy/bambuddy/issues/1171), reported by @tom5677) — When a print ended with status `aborted` (printer self-abort, or a user stopping the print on the printer's own touchscreen) or `cancelled` (user stopping the print via the Bambuddy queue UI), the plate-clear gate added in [#961](https://github.com/maziggy/bambuddy/issues/961) was *not* raised — only `completed` and `failed` triggered it (`backend/app/main.py:2660`). Result: the queue scheduler dispatched the next pending item ~2 seconds after the abort, with the previous print's material still on the bed. The reporter saw two prints (P1P + P1S) auto-start onto fouled beds within seconds of each other after touchscreen-aborts, and explicitly flagged the risk of damage to the printer; a third printer (his second P1S) behaved correctly because its previous print had ended `completed`. The original code's comment ("user-cancelled prints don't require a plate-clear ack — nothing printed on the bed") only holds if you cancel right at layer 1; cancelling a 12-hour print at hour 11 leaves a fouled bed too. Fix: the gate is now raised for every terminal status — `completed`, `failed`, `aborted`, `cancelled` — matching the safety contract that the user must acknowledge the bed is clear before any next queued print starts. The gate is user-clearable on the Printers page, so worst case for a layer-1 cancel the user clicks "Clear Plate" once. Touchscreen-aborts are particularly important to gate because Bambuddy's "user stopped via UI" override (`_user_stopped_printers` → `aborted` mapped to `cancelled`) only fires when the user stops via the Bambuddy queue; a touchscreen-stop reports `aborted` straight through. Regression coverage in `test_print_lifecycle.py::TestPlateClearGate`: parametrised across all four terminal statuses (asserts `set_awaiting_plate_clear(printer_id, True)` is called for each), plus a defence-in-depth test that an unrecognised future status string never silently raises the gate.

- **Printer card always shows the first plate's thumbnail when printing a multi-plate 3MF** ([#1166](https://github.com/maziggy/bambuddy/issues/1166), reported by @smandon) — On printers running firmware that drops the plate path from `print.gcode_file` (the reporter's case: P1S 01.10.00.00, but the same shape appears on other firmware revisions), the printer reports `gcode_file: MyModel.3mf` instead of `gcode_file: /Metadata/plate_4.gcode`. The `/printers/{id}/cover` route's regex (`plate_(\d+)\.gcode`) found nothing in the bare `.3mf` filename, defaulted to plate 1, and the printer card showed `Metadata/plate_1.png` from the 3MF — even though the user dispatched plate 4. Same problem hit `current_plate_id` on the status response (printer card detail row showed plate 1). Two-pronged fix on a precedence ladder: **(1) Bambuddy now records the plate it dispatched** — `start_print()` writes `(dispatched_plate_id, dispatched_subtask)` onto `PrinterState` at publish time, and a new `resolve_plate_id(state)` helper prefers that record over the gcode_file regex when `dispatched_subtask == state.subtask_name` (the subtask check rejects stale entries from a prior Bambuddy-dispatched print bleeding into a Studio-direct dispatch). **(2) After the 3MF lands on disk, the cover route scans the zip for a unique `Metadata/plate_*.gcode` entry**: per-plate archives sliced separately in Bambu Studio bundle thumbnails for *every* plate but only the *active* plate's gcode, so a single match unambiguously identifies the plate even when no Bambuddy dispatch exists (Studio-direct flow). Final fallback is plate 1, unchanged. The cover-byte cache key was also simplified — `plate_num` was removed from the key now that resolution is late-bound; `clear_cover_cache()` already runs on every print start, so different plates of the same project always re-fetch a fresh thumbnail. Coverage: 5 unit tests in `test_printer_manager.py::TestResolvePlateId` (dispatch precedence, stale-subtask guard, gcode regex fallback, default-1 path, missing-subtask guard), 4 unit tests in `test_bambu_mqtt.py::TestStartPrintRecordsDispatchedPlate` (dispatch record set/cleared/overwritten/skipped on disconnect), 2 integration tests in `test_printers_api.py` (dispatch wins over plate-1 default; 3MF-scan fallback for per-plate archive without dispatch). Studio-direct multi-plate prints (no dispatch record AND multiple plate gcodes in the 3MF) still default to plate 1 — matches the firmware's own ambiguity, not regressed by this change.

- **AMS slot configuration intermittently fails to reach the printer after several configs in a row** ([#1164](https://github.com/maziggy/bambuddy/issues/1164), reported by @RosdasHH) — Configuring AMS slots a handful of times (the reporter saw it almost every 6th change) would silently stop reaching the printer; ~1 minute later the filament colours on the printer would briefly jump between slots, then settle. Root cause was the zombie-session watchdog at `bambu_mqtt.py:861` introduced for [#887](https://github.com/maziggy/bambuddy/issues/887). When an `ams_filament_setting` response took >10 s (normal under load — concurrent K-profile fetches, busy printer, network jitter) the watchdog incremented an `_ams_cmd_unanswered` counter and zeroed `_last_ams_cmd_time` so it wouldn't re-trigger on the next status push. The bug: the response handler that reset the counter was guarded by `and self._last_ams_cmd_time > 0` — so when the late response *did* arrive (after the watchdog had already zeroed the timer), the counter stayed armed at 1. The next slow response on any `ams_filament_setting` command — possibly minutes or hours later, on an entirely unrelated config attempt — would take the counter to 2 and trigger `force_reconnect_stale_session()`. The user-visible symptoms match exactly: configs stop landing (because MQTT reconnects mid-publish, dropping the in-flight command and surfacing as `Cannot set AMS filament setting: not connected` if the user retries during the ~1 min reconnect window), then the queued state finally lands when the reconnect completes (the "filament colours jumping around" the reporter described). Fix is to drop the `_last_ams_cmd_time > 0` guard: any `ams_filament_setting` response — late or not — proves the channel is alive, so the counter must reset. Watchdog still trips on a real zombie session (no responses at all for two consecutive >10 s windows). Regression test in `test_bambu_mqtt.py::TestZombieSessionDetection::test_late_response_after_watchdog_clears_counter_issue_1164` simulates the exact sequence (watchdog fires → late response arrives → second slow response on a fresh command) and asserts the counter resets to 0 on the late response and the second command doesn't tip the threshold to 2. Other 10 zombie-detection tests still pass unchanged. **Follow-up: cumulative session wedge after ~16-20 commands** — the watchdog fix above heals real zombie sessions, but @RosdasHH continued to see the wedge fire on healthy sessions after enough cumulative commands (configs + spool assignments share the same threshold: "8 + 3", "12 + 1", "16 + 0" all tripped it). His QoS=1 vs QoS=0 vs QoS=2 bisect was the breakthrough — the wedge only happens at QoS=1. paho-mqtt's default `max_inflight_messages` is 20, and Bambu's broker has racy PUBACK matching that leaves some inflight slots unreleased per session, so after ~16-20 cumulative commands the queue silently fills and `publish()` returns success while packets sit in paho's internal queue (force_reconnect heals it because the inflight queue is per-session — the printer had already processed every command, it just couldn't receive any new ones until the session reset). Lifted the ceiling to 1000 via `client.max_inflight_messages_set(1000)` immediately after `mqtt.Client()` construction (`bambu_mqtt.py:3074-3079`). Keeps QoS=1 untouched (the cross-model reliability we deliberately chose for AMS configuration — A1, P1S, X1C, H2D, P2S, X2D all need it) and removes the ceiling as the bottleneck without changing wire-protocol behaviour. The watchdog reconnect from the original fix above stays as defence-in-depth for sessions that go truly zombie. Diagnosis credit: @RosdasHH's careful bisect.

## [0.2.4b1] - 2026-04-29

### Added
- **Enhanced filament colour handling: multi-colour gradients, transparency, visual effects** ([#1154](https://github.com/maziggy/bambuddy/issues/1154)) — A solid hex swatch is the wrong abstraction for a tri-colour, gradient, or sparkle filament — the colour you saw on the spool inventory page was just whatever Bambu's firmware reported as the dominant tone, and there was no way to record what the spool actually looked like. The Spool form's "Colour" section now accepts a paste of up to 8 comma-separated hex stops (`EC984C,#6CD4BC,A66EB9,D87694` — exact format from 3dfilamentprofiles.com) and renders them as a CSS gradient on every swatch site (inventory grid, table, group banner, card, ColorSection preview, color-catalog admin). A new **Effect** dropdown — covering surface effects (Sparkle / Wood / Marble / Glow / Matte), sheen variants (Silk / Galaxy / Rainbow / Metal / Translucent), and structural variants (Gradient / Dual Color / Tri Color / Multicolor) — layers a CSS overlay on top of the colour layer (or, for Multicolor, switches the colour layer to a conic-gradient even when no spool subtype is set, so the catalog editor can flag a multicolor variant directly without needing a paired Spool row). Independent of `subtype` — so the user can override the visual hint without touching Bambu's categorical filament label or the MQTT auto-detection chain. **Transparency is now actually visible**: the existing `rgba` column has always stored an alpha byte but every render site flattened it with `substring(0, 6)`; the new shared `<FilamentSwatch>` component renders against a checkerboard layer beneath the colour layer so any alpha < 0xFF shows through (matches the convention used by image editors and 3dfilamentprofiles.com). **Multicolor subtype** swaps the linear gradient for a `conic-gradient` so the swatch reads as a colour wheel pie instead of a stripe — visually distinguishes a true multi-colour spool from a 2-stop gradient. **Colour-catalog parity**: the same fields land on `ColorCatalogEntry` (Settings → Color Catalog) so a user can save a multi-colour combo once and pick it from the catalog palette across spools — added inline to both the Add form and the inline-edit row, threaded through the JSON export/import path so catalog backups round-trip the new fields. Catalog `hex_color` regex extended to optionally accept `#RRGGBBAA` for transparency-aware catalog entries (backward-compatible — existing 6-char rows still validate). **Schema validation** (`backend/app/schemas/spool.py::normalize_extra_colors` + `normalize_effect_type` — public so `ColorEntryCreate` / `ColorEntryUpdate` can reuse them): comma-separated hex with 6-or-8-char tokens, lowercase canonical form, `#` prefix stripped, max-8-stop cap, empty tokens dropped (so a degenerate paste like `,,FF0000,` survives), invalid tokens rejected at the Pydantic layer with a precise field error. Effect type validated against the fixed set `{sparkle, wood, marble, glow, matte, silk, galaxy, rainbow, metal, translucent, gradient, dual-color, tri-color, multicolor}` — paste-friendly normaliser tolerates `Dual Color` / `dual_color` / `dual-color` and canonicalises to `dual-color`. Both validators live next to `SpoolBase` and are reused by `ColorEntryCreate` / `ColorEntryUpdate` so spool-side and catalog-side rejection rules can never drift. **Frontend swatch component** is one shared `<FilamentSwatch>` (and `buildFilamentBackground()` helper for callers that want just the CSS background-image string for a banner) — used by InventoryPage table, group banner, SpoolCard, ColorSection preview, and ColorCatalogSettings — so there's exactly one place that decides how a filament looks. Colour layer is built as a list of CSS images (no `background:` shorthand) so jsdom and every browser parse it consistently; checkerboard layer is the one that makes alpha visible. Migrations are 4 idempotent `ALTER TABLE ... ADD COLUMN` (Postgres-safe, no `DEFAULT 0` traps) plus a Postgres-only widen of `color_catalog.hex_color` to `VARCHAR(9)`. **i18n**: 12 new keys under `inventory.*` across all 8 locales (en/de/zh-CN/zh-TW fully translated; fr/it/ja/pt-BR seeded with English copies pending native translation, matching the project's flow for newly-added user-facing features). 42 new backend tests (35 unit + 7 integration) covering the normalizer (paste-from-3dfilamentprofiles canonicalisation, whitespace tolerance, mixed 6/8-char, empty-token drop, max-stop cap, invalid-hex rejection, wrong-length rejection, `Dual Color` / `dual_color` → `dual-color` canonicalisation), effect-type validator across all 14 allowed values, end-to-end POST/PUT/PATCH round-trip on both spool + catalog routes, 8-char `hex_color` acceptance, dedupe-on-update, and field clearing via empty string vs explicit null. 20 new frontend tests covering FilamentSwatch (14 — solid render, multi-stop linear gradient, conic for Multicolor *subtype* AND for `multicolor` *effect_type* via the catalog path, surface-effect overlays for sparkle and silk, categorical-only-no-overlay for gradient/dual-color, unknown-effect-ignored, checkerboard rendering for alpha, invalid-hex skip in stops, title fallback), `buildFilamentBackground` helper, ColorCatalogSettings (3 — Add form sends extra_colors + effect_type, full 14-value dropdown, inline edit hydrates from existing entry), and InventoryPage spool grouping (3 — different extra_colors don't collapse, different effect_type don't collapse, identical multi-colour spools still group). Out of scope for V1: gradient stop *positions* (e.g. 25%/75%), MQTT-side auto-import of multi-colour from Bambu (firmware doesn't expose this), per-effect tunable parameters — the current shape closes the user's actual paste-from-3dfilamentprofiles workflow without taking on a structured-stop-position editor.
- **Project URL + cover photo** ([#1155](https://github.com/maziggy/bambuddy/issues/1155)) — Two new fields on every project: a free-text **URL** (rendered as a 24×24 bordered green button beside the project name on every card; opens in a new tab and click is `e.stopPropagation()`-guarded so it doesn't enter the project) and a **cover photo** (replaces the status-icon box on the card with a square thumbnail). The URL field is plumbed through `ProjectCreate`/`ProjectUpdate`/`ProjectResponse`/`ProjectListResponse`, including from-template + create-template flows so the URL inherits between a project and its template; cover photo is *not* inherited because the file would be shared on disk between the source and copy. **Schema validator** rejects anything other than `http://` or `https://` prefixes — `<a href>` rendering would otherwise execute `javascript:` / `data:` / `file:` URLs even with React's default escaping. **Cover image storage**: `Project.cover_image_filename` references a file inside the existing `archives/projects/{id}/attachments/` directory, but it's tracked as a separate column from the `attachments` JSON list so swap/delete operations on the cover don't perturb the user's other attachments. Three new routes (`POST /projects/{id}/cover-image`, `GET /projects/{id}/cover-image`, `DELETE /projects/{id}/cover-image`) — accepts only `.jpg`/`.jpeg`/`.png`/`.gif`/`.webp` (no SVG: SVG can carry script payloads), replaces in place (the prior file is removed from disk before the new one lands so repeat uploads can't accumulate orphans), and self-heals when a DB reference points at a vanished disk file by clearing the column and 404'ing rather than repeatedly touching the filesystem. **GET auth gate**: the cover-image GET route is gated by `RequireCameraStreamTokenIfAuthEnabled` (accepts the same `?token=…` stream credential the archive thumbnail route uses) rather than the bearer-token gate — `<img src>` requests can't carry an `Authorization` header, and the bearer gate would silently 401 every cover image when auth is enabled. The frontend client wraps the URL with `withStreamToken(...)` so the modal preview AND the card thumbnail load in both auth-on and auth-off configurations. **PATCH update** uses `model_fields_set` for the URL field so users can clear it by sending `{"url": null}`. Permissions: `PROJECTS_UPDATE` for upload/delete/PATCH, `PROJECTS_READ` for the GET (via the stream-token gate). **Migration**: 2 idempotent `ALTER TABLE projects ADD COLUMN ...` statements. Localised across all 8 UI languages (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW) — English fully translated, the seven other locales seeded with English copies pending native translation, matching the project's existing flow for newly-added user-facing features. 7 backend integration tests covering URL accept/reject (https/javascript/data), URL clear, cover image upload→serve→delete round-trip with content-type assertion, non-image rejection, and a regression guard verifying the GET route is wired to the stream-token gate (not the bearer gate). 4 frontend ProjectsPage tests covering the link icon render condition, click-propagation guard, no-link-when-unset, and cover-image thumbnail render; 3 frontend client tests pinning that `getProjectCoverImageUrl` appends the stream token, returns the bare URL when no token is set, and URL-encodes tokens with query-string-unsafe characters. Cover image upload is only available on the edit modal (an existing project), since the upload needs a project_id; new projects can add it after first save.
- **"Not Printed" / "Printed" collections on the Archives page** ([#1153](https://github.com/maziggy/bambuddy/issues/1153)) — Virtual-printer uploads land in the archives view with `status='archived'` (uploaded but never sent to a printer), but the existing `Collection` sidebar only had `All / Recent / This Week / This Month / Favorites / Failed / Duplicates` so there was no way to surface "what's still queued in my library that I haven't printed yet" vs "what already went to a printer." Two new collections fill that gap: **Not Printed** filters to `status === 'archived'` (the VP upload state); **Printed** filters to any final-status archive — `completed`, `failed`, `aborted`, `cancelled`, `stopped` — so a user can see every archive that had a print attempt regardless of outcome (the existing "Failed" collection covers just the failure subset). Frontend-only — the data has always been there, just no UI handle for it. 2 new tests in `ArchivesPage.test.tsx::Not Printed / Printed collections` pin the filter behaviour against a fixture covering all 4 status states (archived / completed / failed / cancelled).
- **Virtual-printer archive name source toggle** ([#1152](https://github.com/maziggy/bambuddy/issues/1152)) — Slicer-uploaded archives picked up their display name from the 3MF's embedded `print_name` metadata, which is whatever the original creator set; users who renamed a job in BambuStudio's "Send to printer" dialog never saw that name surface in Bambuddy because the FTP-uploaded filename was only ever used as a fallback when the metadata was empty. Settings → Virtual Printer now exposes an **Archive name source** toggle (Metadata / Filename, default Metadata, preserves existing behaviour) at the top of the page that flips precedence in `ArchiveService.archive_print` for every VP-sourced archive — `_archive_file`, `_add_to_print_queue`, `POST /pending-uploads/archive-all`, and `POST /pending-uploads/{id}/archive` all read the new `virtual_printer_archive_name_source` setting and forward `prefer_filename_for_name` accordingly. Backend validates the value to `metadata`/`filename` only. Strict locales (en/de/zh-CN/zh-TW) get full translations; 4 unit tests parametrised over `filename` / `metadata` / unset / empty-string pin the precedence rule end-to-end through `_archive_file`. Existing post-archive `PATCH /archives/{id}` rename path is unchanged.
- **Multi-color slicing in the Slice modal, with per-plate filament discovery for unsliced project files** — Initial slice support assumed a single filament profile per slice; multi-color 3MFs were silently truncated to the first slot, producing wrong colours on every non-trivial print. The Slice modal now (1) opens a plate-picker step first when the source is a multi-plate 3MF, (2) renders one filament dropdown per AMS slot the picked plate actually uses, with each dropdown auto-populated against the user's local + standard presets by `(filament_type, filament_colour)` match, and (3) submits the user's picks as an ordered `filament_presets: PresetRef[]` array which is forwarded as repeated `filamentProfile` multipart parts to the slicer sidecar (the CLI joins them with `;` for `--load-filaments`). **Per-plate filament list source-of-truth chain**: for a sliced archive the modal reads `Metadata/slice_info.config` directly (existing path); for an unsliced project file (where `slice_info.config` is empty until Bambu Studio actually slices), the new `slice_preview` service runs a fast preview-slice via the sidecar's `slice_without_profiles` (the project's embedded settings drive the slice; we throw away the gcode and only parse the resulting slice_info), and the result is cached by `(kind, source_id, plate_id, content_hash)` with LRU eviction at 256 entries — repeat opens of the same plate are instant. If the sidecar isn't reachable the modal falls back to a heuristic that reads `Metadata/project_settings.config` for the AMS slot config and intersects it with the plate's painted-face data (`paint_color` quadtree leaves on per-object .model files, scanned with a 5% noise threshold to drop single-leaf edit accidents). **SliceModal-only tier priority is now `local → cloud → standard`** (was `cloud → local → standard`): imported profiles win because they carry parsed type/colour metadata in the response, while cloud entries don't (the per-preset detail endpoint rate-limits at ~10/sec per token and 50+ parallel fetches returned 429 on every request). The unified-listing endpoint's dedup pass now backfills metadata cross-tier — if a cloud entry wins dedup over a same-named local entry, the cloud entry inherits the local's `filament_type` / `filament_colour` so the Slice modal's metadata-aware pre-pick keeps working for users who have presets both cloud-synced and locally imported. Other consumers of `/slicer/presets` (Profiles page, etc.) retain the existing cloud-first dedup. **Sidecar** (orca-slicer-api fork, `bambuddy/profile-resolver` branch): `/slice` now accepts up to 16 repeated `filamentProfile` parts (was hard-capped at 1), the slicing service materializes each as `filament_N.json` and joins paths into a single `--load-filaments "a.json;b.json;c.json"` invocation; `/profiles/bundled` listing was extended with `filament_type` and `filament_colour` per leaf so the bundled tier carries metadata into the modal. **Sliced-archive card now reflects the actually-used filament list, not the project-wide AMS config**: `slice_and_persist_as_archive` previously copied `filament_type` and `filament_color` from the unsliced source archive verbatim, which inherited every project-wide AMS slot (16+ swatches on the card for a 2-color print). The new archive now reads those fields from the sliced output's `slice_info.config` via `ThreeMFParser` (which already gates on `used_g > 0`), falling back to the source archive's values only if parsing failed. **Backwards compatibility**: `SliceRequest` schema accepts three shapes — legacy `filament_preset_id: int`, source-aware singular `filament_preset: PresetRef`, multi-color array `filament_presets: list[PresetRef]` — the validator promotes any of them into a populated `filament_presets` list before the route handler runs, and stale browser tabs from before this change keep working unchanged. **Permissions**: no new endpoint paths added; the preview-slice runs inside `/filament-requirements` (gated on `LIBRARY_READ` / `ARCHIVES_READ`) and the multi-filament dispatch runs inside `POST /slice` (gated on `LIBRARY_UPLOAD`) — no auth surface widened. **Tests**: 6 schema tests for `SliceRequest` covering the multi-filament list shape and legacy-vs-new precedence; 9 unit tests for `slice_preview` covering happy path, content-hash invalidation, sidecar-failure no-cache-poison, concurrent-call thundering-herd guard via per-key `asyncio.Lock`, and LRU eviction-with-lock-cleanup; 15 unit tests for `extract_project_filaments_from_3mf` (5 cases) and `extract_plate_extruder_set_from_3mf` (10 cases including the 60/40 painted-threshold pin); a multi-filament wire-format test on `slice_with_profiles` pinning that N filament profiles produce N repeated multipart parts in submission order; 22 frontend SliceModal tests covering the plate picker step, multi-color rendering, metadata-aware pre-pick, manual slot override, archive-vs-library routing, and the new tier order. Localised across all 8 UI languages (English + German fully translated, the six others seeded with English copies pending native translation per the project's existing flow).

- **Slicer presets now span Cloud, imported, and slicer-bundled tiers, end-to-end** — Initial slicer integration only saw DB-backed local imports, so a user without imported profiles got an empty Slice modal even when their Bambu Cloud account or the slicer sidecar carried perfectly usable presets. The Slice modal now pulls from three tiers in priority order — **cloud** (the user's own Bambu Cloud presets), **local** (DB-backed imports), **standard** (slicer-bundled stock profiles) — with name-based dedup so a preset that exists in multiple tiers only renders in the highest-priority one (cloud > local > standard) and within-tier order is preserved exactly. **Listing** (`GET /api/v1/slicer/presets`): cloud branch is per-user with a 5-minute cache keyed on `(user_id, sha256(token)[:16])` so a logout/login or token rotation auto-invalidates without callback wiring from the cloud-auth routes. Bundled branch is global with a 1-hour cache (sidecar's read-only filesystem only changes across image rebuilds). `cloud_status` (`ok` / `not_authenticated` / `expired` / `unreachable`) drives a precise modal banner instead of an unexplained empty list. **Slicing** (`POST /library/files/{id}/slice`, `POST /archives/{id}/slice`): request body now accepts source-aware `{source, id}` triplets per slot (cloud / local / standard) alongside the legacy `*_preset_id` fields for full backwards-compatibility — the schema validator normalises bare integer ids into `PresetRef(source='local', id=str(int))` so the dispatcher only deals with one shape. New `preset_resolver` service fetches the preset content per source: cloud via `BambuCloudService.get_setting_detail` (unwraps the `setting` envelope, falls back to top-level on minor shape variants), local from the DB (existing path), standard via a minimal `{inherits: <name>, from: "system"}` stub that the sidecar's `bambuddy/profile-resolver` branch flattens against `BUNDLED_PROFILES_PATH/<category>/<name>.json` — no preset-content round-trip needed for the standard tier. **Permissions**: the listing route gate matches the slice action itself (`LIBRARY_UPLOAD`) so any user who can slice can populate the dropdowns; the cloud branch has an independent `CLOUD_AUTH` check inside the fetch helper — a user holding `LIBRARY_UPLOAD` but not `CLOUD_AUTH` doesn't see the cloud tier (and can't slice with a cloud preset, returns 403) even if a leftover `User.cloud_token` survived a permission revocation. **SliceModal** (frontend): grouped `<optgroup>` per tier with localised section headers, default-selection follows the cloud > local > standard priority on first load, cloud-status banner with three variants (sign-in / expired / unreachable) only when the status isn't `ok`. **Sidecar** (orca-slicer-api fork, `bambuddy/profile-resolver` branch): new `GET /profiles/bundled` walks `BUNDLED_PROFILES_PATH/{machine,process,filament}` and returns instantiable presets only (`instantiation: "true"`), filtering out abstract bases like `fdm_filament_pla` so the dropdowns only offer things a user can actually pick. **Tests**: 17 unit tests for the listing endpoint helpers (dedup priority + per-slot scoping + order preservation, all four `cloud_status` states, `CLOUD_AUTH` defence-in-depth with token lookup short-circuit, per-user cache isolation, token-change cache invalidation, sidecar-unreachable fallback), 11 unit tests for the source-aware resolver (standard inherits-stub shape, local DB lookup with `preset_type` validation, cloud envelope unwrapping with both standard and top-level shapes, cloud auth-error → 401, cloud `CLOUD_AUTH` defence, slot dispatch routing), 6 schema tests for `SliceRequest` covering legacy bare-int normalisation and new source-aware refs and explicit-ref-wins-over-legacy precedence, 12 frontend tests for SliceModal covering tier-priority auto-selection, `<optgroup>` grouping, fallback when higher tiers are empty, source-aware payload on submit, manual override across tiers, archive-vs-library routing, error display, and all three banner variants. All 3391 backend + 1531 frontend tests pass.

- **Server-side slicing via OrcaSlicer / Bambu Studio sidecar** — Bambuddy can now slice models without a desktop slicer installed. New optional `slicer-api/` Compose stack runs HTTP wrappers around the OrcaSlicer and/or Bambu Studio CLI; Bambuddy's File Manager and Archives pages get a **Slice** button that picks a printer / process / filament preset and dispatches a background slice job whose result lands as a new `.gcode.3mf` in the same library folder (or as a new archive when the source was an archive). Settings → Workflow gets a new **Slicer** card: pick the preferred slicer, toggle "Use Slicer API" on, and paste the sidecar URL — Slice buttons across File Manager, Archives, and MakerWorld then route through the API instead of the OS slicer URI scheme. Status updates come from a global `SliceJobTrackerProvider` that polls `/api/v1/slice-jobs/{id}` and surfaces a single toast per job (queued → running → completed / failed) plus auto-refreshes the file or archive list on success — slicing one file no longer pins the modal. Server side, a fresh in-memory dispatcher (`backend/app/services/slice_dispatch.py`) runs jobs as `asyncio.create_task`s with a 30-minute retention sweep, and the routes (`POST /library/files/{id}/slice`, `POST /archives/{id}/slice`) return 202 immediately with `{job_id, status, status_url}` instead of holding the request open through a multi-minute slice. The CLI bridge (`backend/app/services/slicer_api.py`) distinguishes 4xx (`SlicerInputError`), 5xx (`SlicerApiServerError`), and connection failures (`SlicerApiUnavailableError`) so 3MF inputs can transparently retry with embedded settings when the sidecar's `--load-settings` path segfaults on the input — empirically required for OrcaSlicer 2.3.x + H2D and signalled to the UI via `used_embedded_settings: true`. Sliced output is forced to `.gcode.3mf` so File Manager picks up the embedded thumbnail, the `print_name` is dropped from saved metadata so the displayed filename matches what the user picked, and `file_type="gcode"` paints the badge blue. The polling endpoint `GET /api/v1/slice-jobs/{id}` is gated on `LIBRARY_READ` since job IDs are sequential and the body leaks source filenames + resulting library/archive IDs. The sidecar itself builds from a fork of [AFKFelix/orca-slicer-api](https://github.com/AFKFelix/orca-slicer-api) (`maziggy/orca-slicer-api@bambuddy/profile-resolver`) which adds the `inherits:` chain resolver, `from: "User"` → `"system"` rewrite, `# ` clone-prefix strip, and sentinel-value strip empirically required to slice real OrcaSlicer GUI exports without segfaulting the CLI; the Compose file uses Docker's git-build-context so users don't clone it manually. Default ports are 3003 (orca) and 3001 (bambu-studio) — 3000/3002 are skipped because Bambuddy's virtual-printer feature owns them. 10 backend integration tests cover sync validation (404/400), happy-path enqueue, preset-error → failed job, sidecar unreachable, the 3MF embedded-settings fallback, STL no-fallback, and the strip-before-forward path; 5 new frontend tests for the SliceModal cover preset gating, library + archive enqueue paths, error display, and preset-load failure. New i18n keys under `slicer.*` and `settings.slicer.*` across all 8 locales (English fully translated; the seven other locales seeded with English copies pending native translation, matching the project's existing flow for newly-added user-facing features). Slicer integration is opt-in: if "Use Slicer API" stays off, the existing "open in desktop slicer via URI" flow is the default and unchanged.

- **Per-spool category + low-stock threshold override** ([#729](https://github.com/maziggy/bambuddy/issues/729) — minimal version) — Two new fields on the spool form: a free-text **Category** (with autocomplete from categories already in use, so users naturally re-use "Production" instead of accidentally typing "production" / "prod") and a per-spool **Low-stock threshold (%)** override that defaults to the global setting if left blank. Powers the "I want to differentiate critical spools from prototype spools and alert at different thresholds" use case from the issue without taking on the full multi-tag taxonomy + auto-apply-rules + per-tag alert system the ticket originally proposed (which would have been ~5x the work for the same underlying value). Inventory page gains a Category filter chip — only renders once at least one spool carries a category, otherwise hidden so the chip row stays uncluttered. Low-stock counts in the stat-card and the "Low Stock" filter both honour the per-spool override (so a "Production" spool with override = 90% will count as low-stock at 80% remaining even when the global threshold is 20%). 50-char cap on category, 1-99% range on threshold (0 and 100 are both rejected as footguns). 9 new backend schema-validation tests covering the field defaults, partial-update behaviour, range/length rejection; 2 new frontend tests confirming the per-spool threshold pulls in spools the global threshold misses, and that the category filter chip stays hidden until at least one spool has a category. Localised across all 8 UI languages with full translations. The full multi-tag taxonomy from the original issue isn't going forward; if demand for it grows past the current 3 thumbs-up the design can layer on top of these fields without breakage.

- **Per-event ntfy priority** ([#990](https://github.com/maziggy/bambuddy/issues/990)) — ntfy supports a `Priority` header (1=min, 2=low, 3=default, 4=high, 5=urgent) that drives sound, visibility, and push behaviour on the receiving device, but the existing notifier sent every event at the server default — so a "50% complete" ping looked identical to "print failed" or "printer offline". The Add/Edit Notification modal now renders a per-event "ntfy Priority" section (visible only when the provider type is `ntfy`) listing each *enabled* event with its own Min / Low / Default / High / Urgent dropdown; selections persist into the provider's `config.event_priorities` map and the backend emits a matching `Priority: N` header on the ntfy POST/PUT request (including the image-attachment path). Events not explicitly mapped, malformed values, and out-of-range values (0, 6, "abc", null) all fall through to ntfy's server-side default — there is no clamping, so a misconfigured value never silently sends at the wrong urgency. Test sends (no `event_type` context) deliberately omit the header so the test path cannot accidentally page someone at urgent priority. Existing providers without `event_priorities` are untouched on upgrade. Localised across all 8 UI languages with full translations (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). 6 new backend tests covering header set on mapped event, omitted on unmapped event, omitted when no `event_priorities` configured, omitted when `event_type` is missing, ignored for out-of-range / non-numeric values, and propagated through the image-attachment PUT path.

- **Long-lived camera-stream tokens for HA / Frigate / kiosks** ([#1108](https://github.com/maziggy/bambuddy/issues/1108)) — The existing `?token=…` camera-stream tokens expire after 60 minutes which forced home-automation integrations (Home Assistant cards, Frigate, hallway kiosks) to either refresh on a cron or run with auth disabled. New self-service "Camera API Tokens" panel under **Settings → API Keys** (also reachable via the existing settings search box — type "camera token" / "frigate" / "home assistant") lets any user holding `camera:view` mint a long-lived token they can paste once and forget. Revoke uses Bambuddy's standard styled confirmation modal (no `window.confirm` browser default — same pattern as the rest of the app). Tokens are scoped strictly to camera streaming (no privilege escalation surface — no other endpoint accepts them), formatted `bblt_<8-char-prefix>_<32-char-secret>`, and stored as a pbkdf2 hash so even a DB dump can't replay them; the plaintext is shown to the user **exactly once** in a copy-to-clipboard modal (with a `document.execCommand('copy')` fallback for plain-HTTP LAN deployments where `navigator.clipboard` is gated by the secure-context requirement). Hard 365-day max — the issue's `expire_in: 0` (never) is explicitly rejected because an irrevocable infinite token is a footgun-by-design; UI defaults to 90 days, the cap is enforced both client-side (input clamp) and server-side (validation guard). Owners can revoke their own tokens; admins additionally see an "All users" view for leak triage and can revoke anyone's. The `/camera/stream?token=…` auth dependency tries the existing 60-min ephemeral row first (no behaviour change for the common browser case) and falls through to the long-lived path, so the SPA's existing camera flow is unaffected. Indexed `lookup_prefix` keeps verify O(1) per token even on large installs — pbkdf2 only runs against the one candidate row that matches the prefix, never the whole table. New `long_lived_tokens` table (separate from `auth_ephemeral_tokens` because the lifecycle is different — user-owned, named, revocable, hashed; and separate from `api_keys` because that one is for global webhooks with no user FK and a different permission shape). 15 unit tests covering create-validation/scope/expiry rules, verify happy/garbage/expired/revoked/scope-mismatch/prefix-collision paths, list-by-user vs list-all, idempotent revoke; 14 integration tests covering the create-once-then-listing-hides-plaintext contract, the 365-day cap, the auth gate, owner-vs-admin revoke ownership rules, and that the long-lived token verifies through the same camera-stream auth dependency the route uses (and that revoke immediately invalidates it). 6 frontend tests covering list render, empty state, create-then-shown-once flow, days-input clamp, revoke-with-confirm, and revoke-cancelled paths. New `cameraTokens.*` keys across all 8 locales (English fully translated; the seven other locales seeded with English copies pending native translation, matching the project's existing flow for newly-added user-facing features).

- **Tailscale integration for virtual printers** (builds on [#1070](https://github.com/maziggy/bambuddy/issues/1070) by @legend813) — Opt-in per-VP Tailscale toggle brings each virtual printer into the tailnet, so it's reachable from any tailnet device over a private WireGuard tunnel without port forwarding or public exposure. When enabled, Bambuddy provisions a Let's Encrypt cert for the VP's MagicDNS hostname via `tailscale cert` and the MQTT/FTPS listeners serve it. **Slicer-side caveat worth knowing up front:** both Bambu Studio and OrcaSlicer only accept IP addresses (not hostnames) in the Add Printer dialog, so the LE cert's hostname validation doesn't apply — users still need the Bambuddy CA imported into the slicer, same as LAN mode. The practical benefit here is the private tunnel (remote access without DDNS / port forwarding / public exposure), not cert-import elimination. Default is opt-out (toggle off) so users without Tailscale don't see cert-provisioning attempts or log noise. When a user flips the toggle on a host without a working Tailscale binary, the backend returns `409 tailscale_not_available` and the UI reverts + surfaces a specific toast pointing at the setup steps (install Tailscale → `tailscale up` → `tailscale set --operator=<user>` → enable HTTPS in the tailnet admin console). Docker image now ships the `tailscale` CLI pre-installed; users wire up by uncommenting the `/var/run/tailscale/tailscaled.sock` volume mount in `docker-compose.yml`. The MagicDNS hostname is surfaced on the VP card with a copy-to-clipboard button (modern `navigator.clipboard` in secure contexts, `document.execCommand` fallback for plain-HTTP contexts with textarea cleanup in `finally`). Cert renewal runs daily in-process and restarts only the affected VP's TLS listeners. New i18n keys `virtualPrinter.tailscaleDisabled.{title,description}` + `virtualPrinter.toast.{tailscaleNotAvailable,copyFailed}` across all 8 locales with full translations. 3 new backend integration tests for the 409 guard, 2 unit tests for the `_cancel_restart_task` self-await guard, 4 unit tests for the settings-dedupe migration, and 3 new frontend tests for the clipboard fallback path. Thanks to @legend813 for the original opt-out toggle PR that this was built on top of.

- **Library Trash Bin + Admin Bulk Purge + Auto-Purge** ([#1008](https://github.com/maziggy/bambuddy/issues/1008)) — Library files now move to a trash bin on delete instead of being hard-deleted from disk, with a configurable retention window (default 30 days) before a background sweeper permanently removes them. Admins get a new "Purge old" action on the File Manager that shows a live preview of count + total size before moving every file older than *N* days (with an opt-in toggle for never-printed files, on by default) into the trash in one shot. A new **Auto-purge** setting in Settings → File Manager runs the same purge automatically on a 24-hour cadence when enabled — files still go to Trash first so the retention window remains the safety net; default-off so existing installs don't surprise anyone. Both the per-user delete flow and the admin bulk purge go through the same trash — regular users see and manage their own trashed files; admins see everyone's. External (linked) files bypass trash and keep the original hard-delete behaviour since their bytes aren't under Bambuddy's control. New `library:purge` permission gates the admin operations; retention is adjustable inline on the Trash page for admins. Adds nullable `deleted_at` column on `library_files` with an index (dialect-aware migration: `DATETIME` on SQLite, `TIMESTAMP` on PostgreSQL, since raw `DATETIME` is SQLite-only syntax); every `LibraryFile` query site now routes through a new `LibraryFile.active()` classmethod so trashed rows can't leak into listings, print dispatch, MakerWorld dedupe, or stats. 17 new backend integration tests + 8 new frontend component/page tests; localised across all 8 UI languages. Thanks to @cadtoolbox for the proposal and the follow-up answers that tightened the spec.
- **Archive Auto-Purge** ([#1008](https://github.com/maziggy/bambuddy/issues/1008) follow-up) — Settings → Archives now has an auto-purge toggle plus a **Purge archives now** action on the Archives page header (next to Upload 3MF, mirroring File Manager's placement) that hard-deletes print archives not printed within a configurable window (default 365 days, min 7, max 10 years) with the same live-preview modal as the library purge. Reprinting an archive reuses the row and updates its `completed_at`, so the purge honours the **most recent print completion** — a two-year-old archive you reprinted yesterday is not eligible for deletion. Unlike the library trash, archives are hard-deleted: print history is a decaying timeline, so there is no trash bin intermediate; download or favourite anything you want to keep first. The sweeper runs on the same 15-minute scheduler as the library trash but throttles actual purge runs to once per 24h so a tight tick cadence doesn't churn the DB. Each purged archive goes through the existing safety-checked `ArchiveService.delete_archive` path so the 3MF, thumbnail, timelapse, source 3MF, F3D, and photo folder are all cleaned up together with the DB row. Gated by a new dedicated `archives:purge` permission (Administrators group by default, backfilled on upgrade); 9 new backend integration tests; localised across all 8 UI languages.
- **MakerWorld Integration** — Paste any `makerworld.com/models/…` URL on the new MakerWorld sidebar page to pull the full model metadata, plate list, creator/license info, and per-plate images, then one-click **Save** or **Save & Slice in Bambu Studio / OrcaSlicer** per plate. Closes the last workflow gap for LAN-only users who still had to keep the Bambu Handy app installed solely to send MakerWorld models to their printers. Reuses the existing Bambu Cloud login token for download authentication — no separate OAuth flow, no companion browser extension, no cookie paste. `LibraryFile` now tracks `source_type` + `source_url`, so re-importing the same plate dedupes to the existing library entry. Search / browse-catalogue is intentionally out of scope because MakerWorld's public search endpoint isn't reachable from a server-originated request; the URL-paste flow covers the actual discovery pattern (Reddit / YouTube / shared links).
  **Endpoint route (non-obvious, ~1 day of reverse engineering)** — Pr0zak/YASTL#51 documented that `makerworld.com`-hosted design-service endpoints are cookie-gated (Cloudflare WAF serves a generic "Please log in to download models" to any non-browser bearer request), but the same backend is exposed unblocked at `api.bambulab.com`. The working path turned out to be `GET https://api.bambulab.com/v1/iot-service/api/user/profile/{profileId}?model_id={alphanumericModelId}` with `Authorization: Bearer <cloud_token>` — a different service (`iot-service`, not `design-service`) and a different host, accepting the same bearer the user already signs in with. Response carries a 5-minute-TTL presigned S3 URL (``s3.us-west-2.amazonaws.com/…?at=…&exp=…&key=…``). The `modelId` query param is the alphanumeric identifier (e.g. ``US2bb73b106683e5``) that only appears in the design response body, *not* the integer ``designId`` from the ``/models/{N}`` URL — so the import flow fetches design metadata first, reads `modelId`, then calls iot-service. S3 presigned URLs must be fetched with ``urllib.request`` (not httpx / curl_cffi) because the signature is computed over the exact query-string bytes and any normalising encoder breaks it with ``SignatureDoesNotMatch`` 400s (YASTL#52 describes the same issue). Every other published reverse-engineering project we evaluated (schwarztim/bambu-mcp, kata-kas/MMP) solved the gating by shipping "paste your browser cookie" flows; reusing the existing Bambu Cloud bearer is a substantially cleaner UX and the only fully-automated path.
  **UI and UX features** — per-plate picker with inline **Save** / **Save & Slice in Bambu Studio / OrcaSlicer** buttons, **Import all** to batch-import every plate sequentially, folder picker on the page (default: auto-created top-level "MakerWorld" folder), image gallery lightbox per plate (keyboard ←/→/Esc), two-column sticky layout with Recent imports sidebar (last 10 MakerWorld imports), per-plate inline follow-up actions after import (**View in File Manager** / **Open in Bambu Studio** / **Open in OrcaSlicer** / **Remove from library**), per-plate delete via the standard Bambuddy confirm modal (no browser `confirm()`), elapsed-time + phase label ("Resolving … 3 s", "Downloading … 18 s") during the synchronous import POST so users see progress on large 3MFs, URL-change detection that drops the preview when the pasted URL diverges from the resolved one (fixes a class of "I thought I was importing model B but got A" dedupe confusion), rich error toasts per-phase, and the slicer-open path reuses Bambuddy's existing token-embedded library download (`/library/files/{id}/dl/{token}/{filename}`) so the handoff works even with auth enabled. Localised across all eight UI languages.
  **Security hardening** — the MakerWorld description HTML is user-authored and goes through `DOMPurify.sanitize()` before `dangerouslySetInnerHTML`. `<img>` tags inside summaries are rewritten to route through Bambuddy's ``/makerworld/thumbnail`` proxy so the SPA's ``img-src 'self' data: blob:`` CSP stays unwidened. Thumbnail proxy now uses ``follow_redirects=False`` (the host-allowlist guarantee is only meaningful on the initial URL — a 302 to `169.254.169.254` would otherwise bypass it). The 3MF CDN fetch sends only `User-Agent` — the Bambu Cloud bearer is never forwarded to the CDN. S3 presigned-URL fetch uses a `urllib.request` opener with a no-op ``HTTPRedirectHandler`` for the same reason. Filenames from MakerWorld responses are `os.path.basename`'d before persisting, so a malicious ``name: "../../evil.3mf"`` cannot surface a path-traversal string into the DB / UI (on-disk storage uses a UUID filename regardless). New routes respect the `MAKERWORLD_VIEW` (resolve / recent-imports / status) and `MAKERWORLD_IMPORT` (import) permissions. SSRF guard on downloads rejects any host that isn't `makerworld.bblmw.com`, `public-cdn.bblmw.com`, or a `.amazonaws.com` subdomain.
  **Test coverage** — 46 unit tests for `services/makerworld.py` (header shape, API base, `get_design`/`get_design_instances`/`get_profile`, `get_profile_download` 200/401/403/404/no-token, `download_3mf` SSRF rejection of 4 hostile hosts, S3 path delegation, CDN path with minimal headers, size-cap, `_download_s3_urllib` happy/redirect/size/network paths, `fetch_thumbnail` with `follow_redirects=False`); 19 route tests (`/resolve`, `/import` with folder autocreation + explicit folder + dedupe + filename basename + profile_id response, `/recent-imports` with empty-list / ordering / pydantic shape / limit clamping, `_canonical_url` unit); 12 frontend tests (button labels, slicer-name interpolation, URL-change detection, inline post-import actions, Recent imports rendering, DOMPurify `<script>` strip).

- **SpoolBuddy kiosk no longer shows main-app toasts** — the global `ToastProvider` (in `App.tsx`) wraps both the main app routes and the SpoolBuddy kiosk routes, so the background-dispatch progress overlay (job percent, completion summaries, etc.) was rendering on the kiosk display alongside any in-flight prints. Added a `setViewportSuppressed` setter on the toast context; `SpoolBuddyLayout` flips it on mount and restores on unmount via a single `useEffect`. The state machine, dispatch-event subscription, and other tabs' toast UIs are untouched — only the visible viewport is hidden while a kiosk display is active. Trade-off accepted: kiosk-local one-shot toasts (plate-clear confirmation, quick-add errors) are also hidden, but the kiosk's UI already provides direct visual feedback (the plate-ready row vanishes on click; quick-add failures surface in the modal). Updated `SpoolBuddyLayout.test.tsx` to wrap in `ToastProvider` and expand its lucide-react mock with the icons ToastContext imports. 2 new regression tests: `ToastContext.test.tsx::viewport suppression` pins the suppressed-viewport `hidden` class toggle without affecting the underlying state, and `SpoolBuddyLayout.test.tsx::suppresses the global toast viewport while mounted` confirms the kiosk layout flips suppression at mount and cleanup.
- **Background-dispatch toast no longer reads as "frozen at 100%" for fast uploads** — small files (a few hundred KB to a printer over LAN) finish FTP upload in <500ms, so the progress bar would jump to 100% and then sit there for ~1-2s while the printer's MQTT confirmation landed and the success toast replaced the dispatch toast. Now, when the byte-count reaches the total but the job status is still `processing` (i.e. upload done, awaiting printer ack), the byte-count line is replaced with "Awaiting printer..." and the progress bar gets `animate-pulse` to indicate continued activity. Translated across all 8 locales (`backgroundDispatch.awaitingPrinter`). 2 new tests in `ToastContext.test.tsx::background dispatch — upload-done UX` cover the threshold (`uploadProgressPct >= 99.9` with `processing` status switches to "Awaiting printer..." + pulse) and the in-flight case (`50.0%` keeps the byte/percent counter, no pulse).
- **SpoolBuddy kiosk: "Plate ready" pills under the printer status badges** — when any printer reports `awaiting_plate_clear=true`, a small amber pill appears in the dashboard's left column, sized to match the existing online/offline printer badges. Each pill shows the printer name plus a "Clear" action; tapping it calls `POST /printers/{id}/clear-plate` and optimistically removes the pill from the UI before the WebSocket round-trip lands. Multi-printer setups (e.g. four H2Ds finishing at once) wrap inline via `flex-wrap` so the dashboard stays compact instead of pushing everything else off-screen. The kiosk's API key already passes the `printers:clear_plate` permission gate via the existing `_APIKEY_DENIED_PERMISSIONS` denylist (the permission is intentionally not denied — clear-plate is an inventory-flow operation, not an admin one), so no auth wiring changes were needed. Translated across all 8 UI languages (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW). 5 new regression tests in `SpoolBuddyDashboard.test.tsx::plate-clear row` cover: row hidden when no printer is pending, mixed pending/non-pending printers (only the pending one gets a pill), title attr + pill text content + Clear label all rendered, clicking calls `api.clearPlate(printerId)`, the optimistic cache write makes the row vanish without waiting for a refetch, and three concurrent pending printers wrap inline in the same `flex-wrap` container. The mock `useTranslation` was upgraded to support `{{var}}` interpolation so future tests can assert on rendered i18n strings with arguments.
- **Per-request trace ID column on every log line, plumbed through HTTP access log + application logs + response headers** — Builds on the new uvicorn-access-log-into-bambuddy.log change below: the access line tells you *who* called an endpoint, but until now there was no way to tie that line to the application records emitted on the server side while handling that request. A new FastAPI middleware (`trace_id_middleware` in `main.py`, sourced from `backend.app.core.trace`) stamps each request with a fresh 8-char hex ID (or honours a sane inbound `X-Trace-Id` header for cross-system correlation), stores it in a `ContextVar` so any code in the request's call stack can read it, echoes it on the response as `X-Trace-Id`, and a new `TraceIDFilter` injects it into every `LogRecord` so the format string `[%(trace_id)s]` resolves to the right ID for the right request. ContextVars (rather than `request.state`) are the right plumbing here because asyncio copies the current context into every `asyncio.create_task`, so background work spawned from inside a request inherits the trace ID without explicit threading; the logging filter has no access to the FastAPI request object regardless. Records emitted outside any request scope (startup, MQTT callbacks, scheduler) get a stable `-` placeholder so the column stays visually aligned and missing values are obvious in `grep`. Inbound `X-Trace-Id` is hard-validated against a strict whitelist (`[A-Za-z0-9_-]+`, max 64 chars) before being honoured — a hostile or buggy caller cannot smuggle log-injection payloads (newlines, control chars, megabyte blobs) into `bambuddy.log` via the trace-ID column; values that fail the gate silently trigger a freshly minted server-side ID rather than failing the request. Middleware is decorated AFTER `auth_middleware` on purpose: Starlette stacks `@app.middleware` decorators LIFO so the last-decorated runs first inbound, making trace stamp the OUTERMOST layer — auth log lines and every record emitted on the way down to and back from the route handler all carry the same ID. Output now looks like `2026-04-26 09:51:39,152 INFO [uvicorn.access] [a4f3b1e7] 192.168.1.42:54812 - "POST /api/v1/printers/1/print/stop HTTP/1.1" 200` paired with the route handler's `2026-04-26 09:51:39,158 INFO [bambu_mqtt] [a4f3b1e7] [SERIAL] Sent stop print command` — one `grep a4f3b1e7` away from the full causality chain. 30 new tests across `tests/unit/test_trace.py` (placeholder when no request scope, filter copies ContextVar value onto records, ID propagates into spawned tasks via asyncio context copy, concurrent requests don't leak IDs into each other, generator produces unique hex IDs, hostile payloads rejected by validator, max-length boundary, dash/underscore variants accepted) plus `tests/integration/test_trace_middleware.py` (X-Trace-Id header echoed on response, body and header IDs match, each request gets a unique ID, generator format stays short hex, safe inbound IDs honoured, hostile inbound IDs replaced, overlong inbound IDs replaced, ContextVar reset cleanly after request).

### Changed
- **AMS slot "Assign to inventory spool" picker now lists every spool, including RFID-tagged Bambu Lab ones** ([#1133](https://github.com/maziggy/bambuddy/issues/1133)) — The picker that opens from `<FilamentHoverCard>` / SpoolBuddy's slot-action sheet had two stacked filters that together blocked a real workflow: (1) `AssignSpoolModal` only listed spools whose `tag_uid` AND `tray_uuid` were both null, hiding any Bambu Lab spool that had been auto-created from RFID or scanned via SpoolBuddy NFC; (2) `FilamentHoverCard` rendered its inventory section (assign + unassign affordances) only when the slot's vendor was *not* `Bambu Lab`, so even if you fixed the picker the button to open it wasn't visible on a BL slot. The use case both filters blocked: a user who has a Bambu Lab spool sitting in their inventory but doesn't want to scan it via SpoolBuddy NFC each time and just wants to pick it from the list. Both gates are gone now: the modal lists every spool that isn't already taken by a different (printer / ams_id / tray_id) tuple, and the hover-card inventory section renders for every vendor including Bambu Lab. The AMS-vs-external-slot distinction in the modal also collapsed — external slots (amsId 254/255) used to be the only path that allowed picking a tagged spool, and that special-case is now redundant. Empty slots (`<EmptySlotHoverCard>` in Bambuddy, `slotActionPicker.tray === null` in SpoolBuddy) lost their assign affordance entirely: a physically empty slot has no spool to attach an inventory record to, and offering the action there only led to users assigning the wrong spool to a slot the printer hadn't actually loaded yet — assignment now requires a loaded slot. The `i18n.inventory.noManualSpools` key (whose copy talked specifically about "manually added spools") was renamed to `inventory.noAvailableSpools` with new copy ("No spools available. Add a spool to your inventory or unassign one from another slot first.") since the empty-state premise changed; localised across all 8 languages with full translations. 5 net-new frontend tests in `__tests__/components/FilamentHoverCard.test.tsx` (assign/unassign buttons render for `vendor: 'Bambu Lab'`, non-BL vendors unchanged, EmptySlotHoverCard renders no assign affordance, configure button still works on empty slots) plus the existing `AssignSpoolModal.test.tsx` "filters out BL spools" expectation was inverted to match the new contract and the empty-state test reworked to exercise the only remaining trigger (every spool taken by another slot).
- **Inventory: "Delete Tag" button renamed to "Clear RFID Tag"** ([#729](https://github.com/maziggy/bambuddy/issues/729) follow-up) — The reporter mistook the button for a taxonomy-tag delete (it actually clears the RFID tag UID/UUID off the spool record so the row can be re-attached to a different physical spool). Renaming it to "Clear RFID Tag" + the success toast to "RFID tag cleared" removes the ambiguity. No behaviour change. Localised across all 8 UI languages with full translations.

- **Nozzle icon on the dual-nozzle status card** ([#1115](https://github.com/maziggy/bambuddy/issues/1115)) — the dual-nozzle active-extruder card on the printer status bar was the only card in that row without a theme icon (the Nozzle/Bed/Chamber temperature cards all carry a thermometer icon), which left the row looking visually uneven on H2D / H2S / H2C. Adds a small schematic nozzle icon (filament body + heater block + tip) above the L/R diameter labels, styled in amber-400 to match the card's active-extruder accent. SVG design contributed by @m4rtini2.
- **Slice tracker no longer shows the "embedded settings used" warning toast** — `SliceJobTrackerContext` was emitting a yellow warning toast on every completed slice whose result carried `used_embedded_settings: true` (the auto-fallback path that fires when the sidecar's `--load-settings` triplet rejected the input). For 3MF inputs that fallback fires on essentially every slice in production (BambuStudio CLI segfaults silently on `--load-settings` over 3MF, even with the broader strip applied — verified end-to-end with the new sidecar stderr capture), so the toast was firing on essentially every completed slice and adding noise without a useful action. The `used_embedded_settings` flag still lands on `SliceResponse` / `SliceArchiveResponse` for tests + observability (`test_library_slice_api.py:347` continues to pin it); only the user-facing toast goes. `slice.fallbackUsedEmbedded` removed from all 8 locale files in the same change.

- **Settings page: permission-gated instead of admin-only** — the Settings sidebar entry has always been visible to any user holding `settings:read`, but the route guard required admin role, so a non-admin with `settings:read` would see the entry, click it, and get silently redirected back to the dashboard. The route guard now matches the sidebar: any user with `settings:read` can open the page, and the individual tabs / cards continue to enforce their own per-feature permissions (`users:read`, `groups:update`, `oidc:*`, etc. — many of them admin-only, some not). Group editor routes moved to permission-based guards too (`groups:create` for `/groups/new`, `groups:update` for `/groups/:id/edit`), so permission delegation works end-to-end. Admins retain full access since admins implicitly hold every permission.
- **i18n: full key parity across all 8 locales** — `en` is the reference; every other locale (`de`, `fr`, `it`, `ja`, `pt-BR`, `zh-CN`, `zh-TW`) is checked identically and any drift fails CI. Until now, the parity script at `frontend/scripts/check-i18n-parity.mjs` only enforced parity for `de` / `zh-CN` / `zh-TW` and demoted `fr` / `it` / `ja` / `pt-BR` to an "informational" tier — drift was reported but never gated. Result: 78 missing keys in fr and it, 66 in pt-BR, 54 in ja, accumulated across every release that added new en strings. Backfilled real translations (not English fallbacks) for every gap: `login.resetPassword.*` (12 keys, fr/it/ja), `printers.firmwareModal.*` extension (7 keys × 4 locales) from the firmware modal redesign, the full `settings.spoolbuddy.*` device-control admin block (~40 keys) for unregister / reboot / shutdown / update / restart confirms, the kiosk-side `spoolbuddy.settings.*` block (13 keys × 4) for backend & auth + diagnostics, and the new `virtualPrinter.archiveNameSource.*` block from this release ([#1152](https://github.com/maziggy/bambuddy/issues/1152)). The parity script itself dropped the two-tier `STRICT` / `info` machinery — every non-en locale is now treated equally — so any future feature that adds en strings without translating them everywhere fails CI uniformly. All 8 locales sit at 4492 leaves.

### Fixed
- **In-app upgrade was hardcoded to `origin/main` and silently no-op'd whenever the latest release wasn't on main** — `_perform_update` ran `git fetch origin main && git reset --hard origin/main` verbatim, regardless of which version GitHub's releases API reported as latest. So during any beta release cycle (when `0.2.4b1` lives on its own branch and `main` still points at the previous stable), users on the prior stable who clicked *Apply Update* saw the GUI report success but actually stayed pinned to the old `main` HEAD. The pre-existing pip-cwd and SSH-origin-clobber bugs in this same code path made it worse, but the underlying limitation was that the updater literally couldn't reach a non-main release. Fix: extract `_discover_target_release(db)` (mirrors the same release-API + `include_beta_updates` selection logic the GUI's update-check route already uses), pass the resolved tag (e.g. `v0.2.4b1`) into `_perform_update(target_ref)`, and `git fetch --prune --tags origin && git reset --hard <tag>`. The fetch step now pulls `--tags` so the tag ref is locally resolvable; the reset takes whatever ref the caller resolved instead of a hardcoded branch. Also makes `apply_update` return a clear error if no release matches the user's channel rather than silently kicking off an update that can't land. Three new regression tests in `test_updates_api.py` cover (1) `_perform_update` resets to the caller-supplied ref and fetches tags, (2) `apply_update` plumbs the discovered tag through to `_perform_update`, (3) `apply_update` errors out cleanly when discovery returns no candidate.
- **In-app upgrade clobbered SSH `origin` on developer checkouts** — The in-app *Apply Update* path unconditionally ran `git remote set-url origin https://github.com/maziggy/bambuddy.git` before fetching, on the assumption that systemd service users wouldn't have SSH keys configured. That assumption holds for production native installs, but anyone testing the upgrade flow against their own development checkout (where `origin` is legitimately `git@github.com:maziggy/bambuddy.git` and authentication is via SSH keys) had their SSH origin silently rewritten to HTTPS — so the very next `git push` prompted for HTTPS credentials they didn't have configured and bounced. Fix: the updater now reads the current `origin` first via `git remote get-url`, parses the URL into an `(owner, repo)` pair (handling all four canonical forms — `git@github.com:owner/repo[.git]` and `https://github.com/owner/repo[.git]`), and only rewrites if it doesn't already resolve to `maziggy/bambuddy`. Native installs with no remote set, or origins pointing at a fork / wrong repo, still get reset to the canonical HTTPS URL. Three regression tests in `test_updates_api.py` cover the parser, the SSH-preservation case, and the fork-rewrite case so a future refactor can't regress either side of the contract.
- **Native-install in-app upgrade silently skipped `pip install` and the new dependencies never landed** — On a native install (where systemd sets `DATA_DIR=$INSTALL_PATH/data`), the in-app *Apply Update* button shipped the new code via `git reset --hard origin/main` correctly but then logged `ERROR: Could not open requirements file: [Errno 2] No such file or directory: 'requirements.txt'` and continued without installing the new deps. `pip install -r requirements.txt` was running with `cwd=settings.base_dir`, which on a native install resolves to the data dir (e.g. `/opt/bambuddy/data`), not the source-code dir (`/opt/bambuddy`); pip doesn't walk up looking for the requirements file the way `git` walks up looking for `.git`, so the file wasn't found, the install was effectively skipped, and the user ended up with new code but stale dependencies — which surfaces as cryptic import / runtime errors on the next restart. Same bug affected the optional `npm install` / `npm run build` step (it tested `frontend_dir = base_dir / "frontend"`, which doesn't exist on native installs, and silently fell through to the pre-built static files). Fix: introduce `settings.app_dir` alongside `settings.base_dir` pointing at the source-tree root, and run `pip install` and the npm steps with `cwd=settings.app_dir`. Git operations keep using `base_dir` since they already worked (git walks up to find `.git`). Docker users were unaffected — Docker doesn't use the in-app updater (image pull replaces it). Regression test in `test_updates_api.py` mocks every subprocess invocation in `_perform_update`, captures their cwd, and asserts the pip step runs in `app_dir` and that `requirements.txt` actually exists there, so a future refactor that re-introduces `cwd=base_dir` for the pip step fails CI before another user trips over it.
- **Postgres restore from a SQLite Local Backup aborted with `cannot drop table printers`** — Settings → Backup → Restore on a Bambuddy running against external Postgres failed with `asyncpg.exceptions.DependentObjectsStillExistError: cannot drop table printers because other objects depend on it` whenever the live database carried orphan tables from removed features — for example legacy `spoolman_slot_assignments` / `spoolman_k_profile` from an earlier Spoolman integration that has since been removed from the ORM but whose tables and `*_printer_id_fkey` constraints still sat in the live schema, pointing at `printers`. The restore path (`_import_sqlite_to_postgres` in `settings.py`) called `metadata.drop_all`, which only enumerates tables defined by SQLAlchemy ORM models and emits plain `DROP TABLE` (no `CASCADE`); Postgres correctly refused to drop `printers` while external constraints still referenced it, the entire restore aborted before any rows landed, and the user was left without a working DB. The drop phase now executes `DROP TABLE … CASCADE` on every table in the `public` schema (via a `pg_tables`-iterating PL/pgSQL `DO` block, after FKs have been stripped from the ORM metadata) before `metadata.create_all` rebuilds the schema. CASCADE is the right tool for a destructive restore — the user has explicitly chosen to wipe the DB and replace it from backup, so taking out orphan tables alongside ORM tables is correct behaviour, not surprise data loss. SQLite restores are unaffected (they go through a separate path). Discovered while attempting to restore a 0.2.4b1 backup onto a Postgres instance that had been upgraded across the Spoolman integration rewrite. Two regression tests in `test_postgres_restore_drop_cascade.py` mock the Postgres engine, run `_import_sqlite_to_postgres` against a tiny SQLite source, and assert (1) the captured SQL stream contains a CASCADE-aware iteration over `pg_tables` (so a regression to `metadata.drop_all` fails CI loudly, before another user trips on it) and (2) the CASCADE drop is scoped to `schemaname = 'public'` so a shared Postgres instance holding non-Bambuddy data in other schemas isn't taken out by a restore. All 44 existing settings-API tests still pass unchanged.
- **H2D Pro multi-plate dispatch double-/triple-fire** ([#1157](https://github.com/maziggy/bambuddy/issues/1157)) — Scheduling 3 plates of a multi-plate file to the same H2D Pro caused the scheduler to fire all three `project_file` commands within ~60 seconds, even though the printer hadn't transitioned out of `FINISH` for the first one yet. The H2D Pro can sit at `FINISH` for 80–210 s after accepting `project_file` before the `gcode_state` flips to `PREPARE`, and during that window the existing DB `busy_printers` seed (querying queue items in `printing` status) was empirically missing the in-flight item — observed in support logs as items 139/140/141 all dispatching with status='printing' yet only the third actually triggering a state transition. User-visible symptoms: layer count flapping, all queued plates showing as printing simultaneously, MQTT disconnect storms (33 in a single 5-minute window), eventual print failure. Root-cause fix is a defensive in-memory dispatch hold layer in `print_scheduler.py`: when `_start_print` succeeds we record `(printer_id, dispatched_at, pre_state, pre_subtask_id)`, and the next `check_queue` tick adds that printer to `busy_printers` until either (a) the watchdog observes a state/subtask transition (success path — release immediately past a 60 s minimum cooldown), or (b) a 180 s hard timeout expires (escape hatch for lost MQTT sessions). The minimum cooldown also prevents a spurious double-dispatch if the printer pulses through PREPARE→RUNNING→PREPARE in the first second after acceptance. The hold is purely additive — sits alongside the existing seed query and `_is_printer_idle` checks, doesn't depend on DB row visibility, doesn't depend on `on_print_complete` firing correctly. Per-printer isolation: a hold on printer A never blocks printer B. Edge cases covered by 12 new unit tests (`test_scheduler_dispatch_hold.py`): no-pre-state fallback (printer was offline at dispatch time), status-unavailable keeps hold (printer disconnected post-dispatch — don't release on missing data), idempotent release, hard-timeout self-cleanup, transition-during-cooldown still holds. The 90 s watchdog still owns the unhappy-path revert (queue item back to `pending` for retry) — this fix runs alongside it, not instead of it. All 179 existing scheduler tests still pass unchanged.

- **Project picker UX in archives** ([#1151](https://github.com/maziggy/bambuddy/issues/1151)) — The "Add to Project" submenu in the archive context menu was unusable past the visible fold once a project library exceeded the 300px scroll cap: any wheel scroll, arrow-key navigation, or scrollbar click slammed the entire context menu shut. Root cause was a capture-phase `document.scroll` listener in `ContextMenu` that fired on internal submenu scrolls too — the listener now checks `menuRef.current.contains(e.target)` and ignores scrolls inside its own subtree. Project lists are now sorted alphabetically by name (`localeCompare`) at every assignment site (Archives context-menu submenu ×2, BatchProjectModal, EditArchiveModal, "review new uploads" panel, FileManagerPage project-picker) instead of newest-first from the API. The Archives "Add to Project" submenu and BatchProjectModal both gain a search input (rendered only when there are >5 projects, so small libraries stay clean) that filters the list by name as you type — Enter picks the first match. New `archives.menu.searchProjects` i18n key in all 8 locales (en/de fully translated, the six others seeded with English copies pending native translation, matching the project's existing flow).

- **OIDC `auto_link_existing_accounts` now works with custom email claims (Azure Entra ID)** ([#1088](https://github.com/maziggy/bambuddy/issues/1088)) — `auto_link_existing_accounts` was previously blocked unless both `email_claim='email'` and `require_email_verified=True`. This also rejected Azure Entra ID configurations using `preferred_username` or `upn` as the email claim — the recommended setup for that provider, which does not send `email_verified`. The guard now only blocks the genuinely unsafe combination (Fall B): `email_claim='email'` + `require_email_verified=False`. Custom-claim configurations (Fall C) never consult `email_verified` at all, so there is no verification-bypass risk on that path. All five enforcement layers (DB CHECK constraint, schema validators for create and update, route combined-state guard, DB migration for existing installations) have been updated consistently. **Security note:** custom claims are safe for auto-link only when the claim value is tenant-administered. If your IdP allows end users to self-assert the claim's value, do not enable auto-link. An in-app warning is shown in the OIDC provider form when this combination is configured.
- **OIDC settings form: "Require email verified" toggle no longer jumps layout when auto-link is enabled** — When `Auto-link existing accounts` was toggled on, the shorter description text caused the `Require email verified` toggle to reflow next to `Auto-link` in the flex container instead of staying on its own row. Both toggles now have `w-full` and always occupy a full row regardless of description length.
- **P1P print dispatch failed with `0500_4003 "can't parse print file"` when the printer was slow to acknowledge** ([#1150](https://github.com/maziggy/bambuddy/issues/1150), reported by @d3ni3) — On a P1P at firmware 01.10.00.00 the printer can take up to ~135 seconds to actually start parsing a freshly uploaded `.3mf` after the MQTT `project_file` command lands; FTP STOR returns 226 cleanly and the upload is intact, but `gcode_state` stays at `IDLE` and `subtask_id` doesn't advance until the printer's slow internal parse completes. Both dispatch watchdogs (`_verify_print_response` in `background_dispatch.py` and `_watchdog_print_start` in `print_scheduler.py`) interpreted the missed transition as a half-broken MQTT session — the original #887/#936 condition where telemetry kept arriving but our publishes were silently swallowed — and called `force_reconnect_stale_session` to wipe paho's QoS-1 queue and reconnect with a fresh client_id. That reconnect mid-parse is precisely what makes the P1P emit `0500_4003`: the new MQTT session interrupts the in-progress parse on the printer side and the printer reports the file as unparseable. The repro: send a print job, wait 15 seconds while the printer is still parsing, watch the watchdog force-reconnect, watch the printer fail with the parse error, retry — same loop. Sending the same file from BambuStudio worked because BambuStudio doesn't reconnect MQTT mid-parse. The fix uses the printer's `gcode_file` field as a definitive discriminator between #1150 (slow parse) and #887/#936 (half-broken session), since both look identical from telemetry alone: in both cases push_status keeps flowing, `state` stays unchanged, and `subtask_id` stays at the pre-dispatch value. The distinguishing signal: when the project_file command actually lands on the printer side, the printer's `gcode_file` field updates in push_status to reflect the newly-uploaded file; if the publish was silently swallowed (#887/#936), the field stays at whatever the printer was previously showing. Both watchdogs now capture `pre_gcode_file` alongside `pre_state` and `pre_subtask_id` from `printer_manager.get_status()` before sending the publish, then compare against the printer's current `gcode_file` after the watchdog times out. If the value changed → command landed → log a `#1150` warning explaining the skip and leave the MQTT session alone. If the value is unchanged → publish was silently swallowed → fall through to the original `force_reconnect_stale_session` call so the #887/#936/#1136 zombie-session recovery is preserved exactly. The user-facing dispatch still fails on timeout (correctly — the print didn't start within the timeout window so the job is marked failed), the queue item still reverts to `pending` so the scheduler can retry, and the next dispatch attempt proceeds against the same intact MQTT session that was about to start the print. Pairs with the 15s → 90s timeout bump that already shipped in commit 9d041868 (the original 15s timeout was a separate v0.2.3.2 limit). Caveat acknowledged in code comments: in a retry-same-file slow-parse scenario the printer's `gcode_file` looks identical before and after the publish lands, so the watchdog falls through to the original reconnect path and the user still sees `0500_4003` on that specific retry — accepted to avoid breaking the half-broken-session recovery, which is the more impactful regression of the two. 4 new unit tests covering both watchdogs: skip reconnect when `gcode_file` changed (the #1150 fix), reconnect when `gcode_file` is unchanged (the #936 protection preserved), skip reconnect when `pre_gcode_file=None` and current is non-None (printer just connected), reconnect when `pre_gcode_file` arg is omitted (backward-compat for callers we haven't updated). All 439 existing dispatch / scheduler / mqtt tests still pass unchanged.

- **3MF profile-driven slicing silently produced wrong-printer output (every 3MF slice fell back to the source's embedded printer regardless of the picked profile)** — Two stacked bugs in the slice pipeline. **(1) Pre-forward strip removed too much.** `_strip_3mf_embedded_settings` was scrubbing all four embedded `Metadata/*.config` files before forwarding the 3MF to the sidecar, on the theory that `--load-settings` would then take precedence cleanly. That theory was wrong: `Metadata/model_settings.config` carries the plate definitions the CLI needs to map `--slice N` to a real plate, and `slice_info.config` / `project_settings.config` supply baseline config the CLI's `StaticPrintConfigs` pass needs to even start. Stripping any of them caused the CLI to silently exit immediately after "Initializing StaticPrintConfigs" — exit code 0, no `result.json`, no stderr — which the sidecar treated as failure and Bambuddy then masked by falling back to `slice_without_profiles` using the un-stripped bytes (and the source's embedded printer). Net effect: every 3MF slice with profiles silently produced wrong-printer output. The strip is now gone from the slicer dispatch path entirely; original bytes go to the sidecar so `--load-settings` overrides only the specific fields the user changed (printer/process/filament) while the embedded plate / model definitions remain intact. **(2) Standard-tier preset stubs were missing the `type` field.** `_resolve_standard` in `preset_resolver.py` emitted `{"name": ..., "inherits": ..., "from": "system"}` for the bundled tier, but the CLI's preset parser also requires a `type` discriminator (`machine` / `process` / `filament`) on every loaded settings file — without it the CLI silently rejects with `rc=-5` ("input preset file is invalid"), which the same masking fallback then turned into another wrong-printer slice. New `_SLOT_TO_PROFILE_TYPE` constant maps each slot to its required type, and the stub now emits the right value per slot. **Tests**: integration test renamed from "strip removes all four configs" to `test_3mf_input_forwarded_unmodified_to_sidecar` — asserts every `Metadata/*.config` plus `3D/3dmodel.model` is preserved verbatim in the multipart body the sidecar receives. Preset-resolver test updated for the new stub shape; new `test_standard_emits_correct_type_per_slot` pins each (slot → type) pairing. Pairs with the orca-slicer-api fork's `bambuddy/profile-resolver` branch which now emits `details` on its `AppError` responses and captures CLI stdout/stderr in the failure path so future regressions of this shape produce a real error message instead of a silent fallback.

- **Sliced-archive card listed every project-wide AMS slot instead of just the filaments the print actually used** — `slice_and_persist_as_archive` previously copied `filament_type` / `filament_color` from the unsliced source archive verbatim, which inherited every project-wide AMS slot configured in the source's `project_settings.config` (16+ swatches on the card for what was actually a 2-color print). The new archive row now reads those fields from the sliced output's `Metadata/slice_info.config` via `ThreeMFParser` (which already gates on `used_g > 0` per-slot), falling back to the source archive's values only when parsing the new 3MF failed. Test in `test_archive_copy.py::test_filament_metadata_only_includes_filaments_with_used_g` builds a 4-slot fixture where slots 2 and 4 have `used_g=0` and asserts both type and color outputs exclude them.

- **Slice modal had no warning when the picked printer profile didn't match the source 3MF's bound printer — silent wrong-printer output** — Both BambuStudio and OrcaSlicer CLIs reject `--load-settings` for a printer different from the one the source 3MF was originally bound to (`rc=-16` "current 3mf file not support the new printer") because the cross-printer "convert project" flow is desktop-Studio only; the slice would then fall back to embedded settings and produce a file sliced for the wrong printer that errored at print dispatch time with "File was sliced for A1, but printing on H2D". The plates response now exposes `source_printer_model` (read from `project_settings.config`'s `printer_model` field, with fallback to stripping the nozzle suffix off `printer_settings_id`); the SliceModal compares it against the picked printer profile name (substring match against the model prefix, e.g. `"Bambu Lab H2D 0.4 nozzle"` matches `"H2D"`) and surfaces an inline amber warning explaining the limitation, plus disables the Slice button while the warning is up so users can't dispatch a guaranteed-wrong slice. Cloud presets with arbitrary user-chosen names (e.g. `"My Custom X1C"`) and legacy 3MFs without `project_settings.printer_model` fall through to no-warning, which is a reasonable default — the user picked it knowingly. New `extract_source_printer_model_from_3mf` helper in `threemf_tools.py` with 6 unit tests covering missing/direct/nozzle-stripped/corrupt-JSON paths; 3 frontend tests in SliceModal pinning the warning + disabled-button on mismatch, no-warning on match, and no-warning when the source model is unknown. New i18n key `slice.printerMismatch` localised across all 8 UI languages.

- **Sliced output of a "single-color" plate had filaments the user never picked** — When a multi-color project (e.g. a MakerWorld Stormtrooper helmet with white shell + grey support filament configured project-wide) was sliced for plate 1 (which only paints with white), the resulting `.gcode.3mf`'s `slice_info.config` had two filaments — white (the user's pick) and grey (a colour the user never chose). Root cause: the SliceModal was sending only the slots the picked plate consumed, but the slicer CLI requires a profile per project AMS slot — when fewer were supplied, the CLI silently substituted the missing slots from the source 3MF's embedded filament metadata, leaking the original creator's grey support filament into the user's output. Same silent-fallback class as the strip-removal bug. Fix: backend's `/filament-requirements` endpoint now returns the FULL project AMS slot list with a `used_in_plate: bool` flag per entry (computed from the cached preview slice for unsliced files; always `true` for sliced files since `slice_info.config` already pre-filters by `used_g > 0`). The SliceModal renders one dropdown per project slot — slots flagged `used_in_plate=true` are editable as before, slots flagged `used_in_plate=false` are auto-picked from project metadata via the existing `(filament_type, filament_colour)` scoring path and disabled with a "— not used by this plate" suffix on the label, so the user only interacts with what matters for their plate while the wire format always carries a profile per project slot. 2 new frontend tests pin the disabled-row rendering and the full-list-on-submit invariant. New i18n key `slice.notUsedByPlate` localised across all 8 UI languages (English + German fully translated, the six others seeded with English copies pending native translation, matching the project's existing flow for newly-added user-facing features).

- **"Analyzing plate filaments…" spinner gave no signal that anything was happening on the first Slice-modal open for an unsliced project file** — On a multi-color 3MF without slice_info data, the backend runs a preview slice via the sidecar to discover which AMS slots the picked plate actually consumes. That's the only source of truth: tried two heuristics — painted-face quadtree scan (silently missed extruders when `object_id` mapping between `model_settings.config` and `3D/3dmodel.model` diverged, surfaced as a single dropdown for a 4-color print) and project-wide AMS list (over-rendered every plate to the project's full slot count) — and both produced wrong counts on real-world multi-color projects. Reverted to preview-slice-as-source-of-truth. The result is cached per `(kind, source_id, plate_id, content_hash)` so re-opens of the same plate are instant, but the first open on a complex model is a real slice (multi-second to multi-minute). The inline spinner now shows elapsed seconds and, after 5s, a hint explaining that this is a one-time preview slice and re-opens will be instant — addresses the original "is anything happening?" complaint without sacrificing correctness. Project-wide `extract_project_filaments_from_3mf` remains as a final fallback when the sidecar isn't configured. New i18n key `slice.analyzingPlateFilamentsHint` localised across all 8 UI languages (English + German fully translated, the six others seeded with English copies pending native translation, matching the project's existing flow for newly-added user-facing features).

- **Settings warning when OrcaSlicer is selected as the preferred slicer** — OrcaSlicer 2.3.2 and 2.4.0-dev (latest nightly as of 2026-04-28) have two upstream CLI bugs that together block slicing on most Bambu-authored multi-color / H2D 3MFs: (1) a SIGSEGV in the multi-extruder filament-resolution path on painted 3MFs ([OrcaSlicer/OrcaSlicer#12426](https://github.com/OrcaSlicer/OrcaSlicer/issues/12426)), and (2) the CLI strict-validates parameter values that BambuStudio writes by default — `solid_infill_filament: 0`, `tree_support_wall_count: -1`, `prime_tower_brim_width: -1` — and exits 238 with `Param values in 3mf/config error: ... not in range`, even though OrcaSlicer's own GUI tolerates these ([OrcaSlicer/OrcaSlicer#13386](https://github.com/OrcaSlicer/OrcaSlicer/issues/13386), filed alongside this change with a minimal repro 3MF). Both bugs verified reproducible on the latest nightly build before filing. Settings → Workflow → Slicer card now renders an inline amber alert under the preferred-slicer dropdown when `orcaslicer` is the current selection, linking out to both upstream issues and recommending Bambu Studio until upstream fixes land. The OrcaSlicer option is intentionally left pickable rather than disabled — users who only slice STLs or single-color 3MFs aren't affected by either bug, and forcibly disabling would also affect them. Localised across all 8 UI languages (English + German fully translated).

- **Live progress for the SliceModal's filament-analysis preview slice + URL-decoded filenames in the toast** — Two follow-ups to the live slicer-progress feature: (1) the modal's "Analyzing plate filaments…" preview slice (the real slice that fires before profile picking, to discover which AMS slots an unsliced plate consumes) now shows the same stage + percent live updates as the user-initiated slice. The frontend generates a per-(source, plate) request_id, forwards it via a new `request_id` query param on `/library/files/.../filament-requirements` and `/archives/.../filament-requirements`, the backend plumbs it through `slice_without_profiles` to the sidecar, and a new `GET /api/v1/slicer/preview-progress/{request_id}` proxy endpoint forwards browser polls to the sidecar's `/slice/progress/:requestId` (CORS-safe — the browser can't reach the sidecar directly). The inline spinner and a new persistent toast both render `Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}` while the preview runs; toast dismisses when filaments arrive. (2) MakerWorld imports were persisting URL-encoded filenames (`stormtrooper-helmet%20h2d.3mf`) verbatim because MakerWorld's API returns the same percent-encoding it uses on its CDN URLs. The import path now `urllib.parse.unquote`s both the manifest-supplied name and the URL path-tail fallback before passing to `save_3mf_bytes_to_library`, plus the frontend defensively `decodeURIComponent`s in the slice toast and analysis-spinner messages so already-imported rows display cleanly without a backfill migration. Falls back to the raw string on malformed encodings (`%XY` where `XY` isn't hex). New i18n keys `slice.previewToast` + `slice.previewWithProgress` localised across all 8 UI languages (English + German fully translated).

- **Live slicer progress in the persistent slice toast** — The persistent slice toast already showed elapsed time + a spinner so the user could see the slice was still running, but for long slices on complex multi-color models that "is anything happening?" gap could last minutes. Bambuddy now wires up the slicer CLI's structured progress channel end-to-end, so the toast renders concrete stage labels + live percent — `Stormtrooper.3mf — Generating G-code (75%) — 47s` — through the entire slice. **Sidecar (`bambuddy/profile-resolver` branch of orca-slicer-api)**: switched the sync `/slice` route from `execFile` to `spawn` so the process can run alongside an FIFO reader; on each request the route generates (or accepts a caller-supplied) `requestId`, `mkfifo`s `${workdir}/progress.fifo`, passes `--pipe ${fifo}` to the OrcaSlicer / BambuStudio CLI, and reads the structured JSON-line progress events the slicer emits (`{"message":"Generating G-code","plate_count":1,"plate_index":1,"plate_percent":80,"total_percent":75}`) into a per-process `ProgressStore` keyed by `requestId`. New `GET /slice/progress/:requestId` returns the latest snapshot; entries linger 30s after slice completion so the caller's last poll still reads the terminal "All done, Success" frame instead of a 404. Both slicer forks share the same code lineage from PrusaSlicer's `BackgroundSlicingProcess`, so OrcaSlicer 2.3.2 and BambuStudio 02.06.00.51 emit identical JSON keys (verified by tracing the binary). **Bambuddy backend**: `slicer_api.slice_with_profiles` accepts `request_id` + `on_progress` callback and spawns a 1Hz parallel poller that hits the sidecar's progress endpoint while the blocking POST is in flight; `SliceDispatchService` gained a `set_progress(job_id, snapshot)` method and a `progress` field on `SliceJob`; the slice routes now generate a uuid `request_id` and wire a callback that forwards each snapshot onto the dispatcher. `GET /slice-jobs/:id` includes `progress` on every poll. **Frontend**: `SliceJobTrackerContext` reads the new `progress` field and re-renders the persistent toast with `{name} — {stage} ({percent}%) — {elapsed}` whenever a useful frame is present, falling back to the existing elapsed-time-only message when the sidecar hasn't emitted anything yet (early "Initializing" phase) or doesn't support progress (older sidecars without the FIFO wiring). 12 sidecar unit tests for the JSON-line parser + ProgressStore (cancellation/grace-window, malformed lines, missing fields), 3 dispatcher tests for `set_progress` (attach/replace/clear, unknown-job-id silent ignore), 3 slicer_api tests for the form-field forwarding + on_progress callback wire-up + 404 short-circuit, 2 frontend SliceJobTracker tests pinning the new toast format and the no-progress fallback. New i18n key `slice.runningWithProgress` localised across all 8 UI languages (English + German fully translated, the six others seeded with English copies pending native translation, matching the project's existing flow for newly-added user-facing features). Graceful when the sidecar lacks `--pipe` support (tested live: OrcaSlicer 2.3.2 + BambuStudio 02.06.00.51 both work; older sidecars without the new endpoint return 404 and the toast cleanly degrades to elapsed-time-only).

- **No visual indicator while a slice job was running — users couldn't tell if a long slice was still progressing or had hung** — Previously SliceJobTrackerProvider emitted one transient toast on enqueue ("Slicing X in the background…") and one on completion ("Sliced X"), with nothing in between. For large multi-color models that take 30s–several minutes to slice, the start toast auto-dismissed after 3s and left a UX dead zone where users would ask "is it still slicing?". The tracker now opens a persistent `slice-job-{id}` toast with a spinner that updates every second showing elapsed time + phase ("Queued: X — 4s" → "Slicing X — 47s"), then is replaced by the existing transient success/error toast on terminal state. Polling cadence (1.5s) is unchanged — a separate 1Hz tick re-renders just the elapsed-time counter so the toast stays smooth even if the backend is slow to respond. Time format compresses gracefully past 60s ("1m 5s") and 60m ("1h 12m"). 4 new unit tests in `SliceJobTrackerContext.test.tsx` covering: persistent toast renders at t=0 (no wait for first tick), elapsed time updates each second while running, success completion replaces persistent with transient "Sliced X", failure replaces with transient error toast carrying the sidecar's `error_detail`. New i18n keys `slice.queuedToast` / `slice.runningToast` localised across all 8 UI languages (English + German fully translated, the six others seeded with English copies pending native translation, matching the project's existing flow for newly-added user-facing features).

- **MakerWorld URL-paste resolver listed plate instances without showing which printer each was sliced for** — MakerWorld's `/instances/hits` endpoint omits the per-instance compatibility info that lives on `design.instances[].extention.modelInfo` (`compatibility` = primary printer the instance was sliced for, `otherCompatibility` = additional printers the uploader marked it compatible with), so every instance row in the resolved-design preview looked identical and users blindly picked the first one regardless of whether it matched their printer — leading to "I downloaded the H2D version and got A1 g-code" complaints. The resolve route now joins both endpoint payloads by instance ID and forwards both fields onto each hit; the MakerWorld page renders "Sliced for {primaryPrinter}" + (when present) "Also marked compatible: ..." per instance row. Backend tests in `test_makerworld_routes.py::TestResolve` cover the merge happy path (compatibility lists land on the right hits) and the "missing modelInfo" fallback (older designs / hits without a matching design.instances entry don't crash the response, just lose the optional fields). New i18n keys `makerworld.slicedFor` / `makerworld.alsoCompatible` localised across all 8 UI languages.

- **Moving a file to an external folder updated the DB row but never wrote the bytes to the mount** ([#1112](https://github.com/maziggy/bambuddy/issues/1112) follow-up — confirmed by @Carter3DP after testing 0.2.4b1) — Carter's report read "the file appears in Bambuddy but not physically on the external folder", which traced to `move_files` only updating `file.folder_id` in the DB while leaving the bytes in the internal `library_files_dir`. Direct upload to a writable external folder was already fixed in 0.2.4b1; the move path was not. Cross-boundary moves now physically relocate the bytes through a new `_move_file_bytes` helper. Same-boundary moves (managed → managed) keep the existing DB-only fast path because the file's on-disk location doesn't depend on which managed folder owns it. The helper handles four flows: managed → external (copy bytes to `<external_path>/<filename>`, flip `is_external=True`, store the absolute path, unlink the managed source), external → managed (copy bytes into internal storage with a fresh UUID name, flip `is_external=False`, store the relative path, unlink the external source, recompute `file_hash` since scan-tracked rows historically carry `file_hash=None`), external → external (same as managed → external), and managed → managed (DB-only). Copy-then-unlink ordering means a partial copy followed by a failed unlink leaves both copies on disk rather than losing the source if the target write fails halfway through on a flaky NAS mount. Failed `shutil.copy2` cleans up partial dest before raising. Defence-in-depth checks block: source on a read-only external mount (move = delete-on-source which a RO mount can't fulfil — would copy-then-fail-to-unlink and silently duplicate the file), filename collisions on the target mount (won't silently overwrite a file the user already has on the NAS), traversal-style filenames after `Path.resolve()`, missing source on disk, and `os.access(W_OK)` on the target mount. Each skip carries a structured `{file_id, code, reason}` entry in a new `skipped_reasons` field on the response so the UI can surface "5 of 10 files skipped: 3 had filename collisions on the NAS, 2 are no longer on disk" instead of a blank "skipped: 5". The original `{moved, skipped}` numeric counters are preserved so existing frontend code that only reads those keeps working unchanged. Six new integration tests in `test_external_folders_api.py::TestCrossBoundaryMove` covering: managed → external relocates bytes (the actual #1112 fix — bytes land on mount, internal source removed, DB row matches reality), external → managed relocates bytes (symmetric path including hash recompute), name collision on target external mount skips with `code: "name_collision"` and leaves the pre-existing target file intact, source on read-only external mount skips with `code: "source_readonly"`, managed → managed stays DB-only (file_path doesn't change, no shutil.copy), and `skipped_reasons` is always present (empty list when nothing skipped) so frontend code can treat it as the source of truth without optional-chaining.

- **`bambuddy.log` filling with `Exception terminating connection ... CancelledError` + `database is locked` cascades on long uploads** ([#1112](https://github.com/maziggy/bambuddy/issues/1112) follow-up, surfaced by @Carter3DP's support package) — Two-part fix to a single root cause: Starlette's `BaseHTTPMiddleware` (which FastAPI's `@app.middleware("http")` decorator uses under the hood) cancels the inner task scope when a client disconnects mid-request — common on long multipart uploads where the client times out before the server's response. Pre-fix `get_db` only caught `Exception`, but `CancelledError` is a `BaseException`, so cancellation skipped the rollback path entirely; the SQLite write lock stayed held until the connection was eventually GC'd, producing the `(sqlite3.OperationalError) database is locked` cascade against `runtime_seconds` updates and other tight-loop writers in @Carter3DP's log. Postgres users would see pool exhaustion / "QueuePool limit overflow" instead of file-level lock contention, but the leak shape is identical. **(1)** `get_db` now catches `BaseException` so `CancelledError` triggers rollback, and wraps both `rollback()` and `close()` in `asyncio.shield` so the cleanup completes even when the await itself is being cancelled by the same cancel scope. The SQLite write lock is released promptly; the connection returns to the pool instead of leaking until GC. **(2)** A `CancelledPoolNoiseFilter` (new `logging_filters.py` filter, attached to `sqlalchemy.pool`) drops the residual log noise that pre-existing pools still emit during their own cleanup — both the `Exception terminating connection ... CancelledError` records (matched on prefix + cancellation-driven `exc_info`, including chained `__cause__`/`__context__`) and the symptomatic `garbage collector is trying to clean up non-checked-in connection` records. Real pool problems — broken connections, network hiccups, exhaustion — keep flowing because they carry a different exception chain or a different message prefix; verified by `test_keeps_terminate_with_real_oserror` and `test_keeps_unrelated_pool_message`. 13 new regression tests across `test_get_db_cancel_safety.py` (commit on clean exit, rollback on regular `Exception`, rollback on `CancelledError` — the actual #1112 fix, close runs even if rollback raises, close failure on clean exit doesn't propagate, both rollback + close go through `asyncio.shield`) and `test_cancelled_pool_filter.py` (drops cancellation-driven terminate, drops GC-cleanup, keeps real `OSError` terminate, keeps terminate without `exc_info`, keeps unrelated pool messages, drops chained-cause `CancelledError`, defensive guard against self-referential cause chains). Applies to SQLite and PostgreSQL — `get_db` is dialect-agnostic and the filtered messages come from base `sqlalchemy.pool` not from any specific dialect.

- **Windows install: `bambuddy.log` filling with `WinError 10054 — _ProactorBasePipeTransport._call_connection_lost` tracebacks** ([#1113](https://github.com/maziggy/bambuddy/issues/1113), reported by @cadtoolbox) — Cosmetic-but-noisy. When a printer / MQTT broker / camera RSTs a TCP socket instead of FINing it (offline X1Es in @cadtoolbox's setup, network gear that drops idle TCP, the printer firmware's own watchdog), Windows asyncio's Proactor cleanup path tries `socket.shutdown(SHUT_RDWR)` on the already-dead socket and hits `WinError 10054`. Application-layer reconnect logic (paho-mqtt, httpx) handles the actual disconnect fine — paho retries, MQTT comes back, telemetry resumes — so the traceback is pure asyncio bookkeeping noise, but it fired multiple times per minute on @cadtoolbox's 9-printer setup with 5 offline X1Es and was the first thing in the sanitized log. Adds a custom `loop.set_exception_handler` (new `backend/app/core/asyncio_handlers.py`) installed on Windows only that pattern-matches the specific `_call_connection_lost` cleanup-RST signature (three signals together: `sys.platform == "win32"`, the exception is `ConnectionResetError`, and the asyncio message string contains `_call_connection_lost`) and downgrades it to DEBUG. Real `ConnectionResetError`s raised inside application coroutines (different message string) and other Proactor cleanup errors (`BrokenPipeError`, `ConnectionAbortedError` — same callback site, distinct signal worth keeping visible) all pass through to `loop.default_exception_handler` unchanged. Linux / macOS use the Selector event loop and never hit this codepath, so `install_proactor_reset_filter()` is an explicit no-op there with a `False` return — verified by `test_install_is_no_op_on_non_windows`. 9 unit tests in `test_asyncio_handlers.py` cover: discriminator matches the exact reported signature, rejects unrelated `ConnectionResetError`s, rejects `BrokenPipeError` even on the same callback site, rejects when no exception object is present, install is platform-gated, install wires the handler onto the loop, suppression doesn't reach the default handler, and unrelated exceptions still hit the default handler. Wired from `lifespan` startup before any task can spawn that might trip it.

- **Auto-Print G-code Injection: start snippet landed before printer startup, and `{placeholder}` substitution was silently broken** ([#422](https://github.com/maziggy/bambuddy/issues/422) follow-up) — Two compounding bugs surfaced by @pleite (Swapmod) and @DevScarabyte (multi-height test prints) on the initial #422 ship: **(1)** Start snippets were prepended to the entire `plate_X.gcode` content, which placed them *before* the printer's bed-heat / homing / nozzle-prime sequence — so a Swapmod start snippet that assumed nozzle-at-temp ran on a cold printer. The injection now anchors at `; MACHINE_START_GCODE_END` (the marker sitting at the bottom of every Bambu/Orca slicer's `MACHINE_START_GCODE` block, after `M109` wait-for-temp), matching where a slicer-side custom-start-gcode would land. Files without the marker (older slicer versions) keep the prepend behaviour as a fallback with a warning log. **(2)** Slicer-style placeholders like `G1 Z{max_layer_z} F600` were written verbatim to the output gcode — the printer firmware then parsed `Z{max_layer_z}` as `Z1` and crashed the head into the print on a 60mm-tall model (a real safety issue: prints damaged, top glass + AMS pushed up off the printer when the model was taller than the hard-coded park height). Added a header parser that reads the 3MF's `; HEADER_BLOCK_START..END` block (lowercased keys, `[units]` suffix stripped, spaces → underscores) and a Prusa-style `{name}` substitution pass that runs over both start and end snippets before injection. Supported placeholders: `{max_layer_z}` / `{max_print_height}` (top-layer Z), `{total_layer_number}` / `{total_layers}`, `{total_filament_weight}`, `{total_filament_length}`, plus any other normalised header key from the source file. Unknown placeholders are left in the snippet verbatim with a warning log — a typo never silently expands to an empty string and the firmware never receives a malformed `Z` parameter. 16 new regression tests in `test_gcode_injection.py` covering: start snippet anchored to the marker (printer startup runs first, snippet sits between `M109 S220` and the marker, file head untouched), missing-marker fallback path, end snippet still appended at EOF, `{max_layer_z}` resolved through the alias map, direct-key substitution from the normalised header, unknown-placeholder pass-through, and direct unit tests for each new helper (`_parse_3mf_gcode_header`, `_substitute_placeholders`, `_inject_start_at_marker`). Wiki page documents the supported placeholder list with a safety warning specifically calling out `{max_layer_z}` for park moves.

- **Camera page ignored `?fps=N` URL parameter** ([#1131](https://github.com/maziggy/bambuddy/issues/1131) diagnostic) — `CameraPage.tsx` hard-coded `fps=15` in the stream URL and never read the URL query string, so `/camera/1?fps=5` (and similar diagnostic suggestions for the freeze report) were silent no-ops. The sibling `StreamOverlayPage` already honoured `?fps=` correctly; the bug was that `CameraPage` was the gap. Now reads `searchParams.get('fps')` via `useSearchParams`, parses it, falls back to 15 on missing/non-numeric, clamps to the backend's 1–30 range, and threads the resulting value into the stream URL. Backend `generate_rtsp_mjpeg_stream` already accepted the parameter and re-clamps per-model (chamber-image A1/P1 capped at 5, RTSP capped at 30). 5 new regression tests in `CameraPage.test.tsx::fps URL parameter (#1131)` cover default-15, honoured value, clamp-above-30, clamp-below-1, and non-numeric fallback — same matrix `StreamOverlayPage.test.tsx` already pins. Independent of the underlying freeze investigation in #1131; surfaced while triaging that report.
- **Reprint-from-archive failed with `0500_4003` SD R/W errors after a stuck dispatch, fixable only by restarting the container** ([#1136](https://github.com/maziggy/bambuddy/issues/1136)) — Reported by @smandon: reprinting from archives sometimes fails immediately with MicroSD R/W exception errors, with the printer's MQTT push referencing a 3MF file from a *different unrelated* archive (`WARIO_Wall_decor_-_NO_AMS.3mf` while the user was actually trying to print `Cable_Organiser_Cable_Clip.3mf`). Once it starts happening, every subsequent reprint hits the same error until the container is restarted. Root cause traced from his support package log to paho-mqtt's client-side QoS 1 queue: when the printer's command channel goes half-broken (telemetry still flowing, publishes silently dropped — same #887/#936 pattern), Bambuddy's 15s dispatch deadline expires (`background_dispatch.py:993`) and calls `force_reconnect_stale_session()`. That function was force-closing the underlying socket so paho's auto-reconnect would kick in — but the same `mqtt.Client` instance, same `client_id`, and **same in-process QoS 1 queue** stayed alive across the reconnect. Any unacked publish from the broken session — typically the just-sent `project_file` for the new archive — got replayed verbatim on the new connection. And because the in-process queue accumulates across multiple stuck dispatches within one Python process, by the second or third stuck reprint there were several stale `project_file`/`resume`/`stop`/`clean_print_error` commands queued up and replaying together. The printer received the flood, tried to load whichever stale path the firmware latched onto last, found a file that no longer existed on its SD card → `0500_4003`. Container restart was the only thing that fixed it because it was the only thing that wiped paho's in-process queue. Replaced the socket-close with a context-aware reconnect: `force_reconnect_stale_session()` and `check_staleness()` now go through a routing helper `_reset_client_for_reconnect()` that picks the right teardown strategy based on caller context. **Async-context callers** (the dispatch deadline path — `background_dispatch.py:993` — which is the actual #1136 trigger, plus FastAPI route handlers via `check_staleness`) get the **hard-reset path**: `client.disconnect()` (broker sees DISCONNECT and drops the session immediately, since `clean_session=True`), `client.loop_stop()` (kills the paho network thread, taking its QoS 1 queue with it), nulls out `self._client`, and calls `self.connect()` to construct a fresh `mqtt.Client` with an incremented `client_id`. New connection starts genuinely empty, no replay possible. **Paho-network-thread callers** (the developer-mode probe and `ams_filament_setting` zombie detection inside `_update_state`, lines ~2604 and ~2623) keep the **socket-close fallback** — calling `loop_stop()` from inside the network thread would self-join and deadlock, so the safe pattern there remains "close the socket and let paho's own loop detect it and auto-reconnect on the same client". Theoretical queue replay is still possible on those paths but #1136 specifically traced through the dispatch path, and the legacy socket-close has been battle-tested for the zombie paths since #887. Routing decision is made via `asyncio.get_running_loop()` — paho's callback thread has no loop, every legitimate hard-reset caller does. 7 regression tests across two new test classes: `TestForceReconnectRouting` (3 tests pinning the sync-context → socket-close fallback, async-context → hard-reset path with mock-stubbed `connect()`, and the state-disconnected broadcast firing once on either path) and `TestHardResetClientDirect` (3 tests pinning the helper directly: old client receives `disconnect()` + `loop_stop()`, `_client` reference cleared, failing `disconnect()` doesn't propagate so the await chain in `background_dispatch.py` doesn't break). Existing `TestZombieSessionDetection::test_two_timeouts_force_reconnect` and `TestDeveloperModeProbeTimeout::test_second_timeout_forces_reconnect` updated to assert the socket-close path (matching their paho-thread context), preserving the legacy contract. All 2179 backend unit tests pass. Thanks to @smandon for the precise reproduction logs that made this diagnosable from a single support package.

- **`logs/bambuddy.log` was silently dropping records from named child loggers** — When the trace-ID column was added to the log format (`%(trace_id)s`), the `TraceIDFilter` was attached to the root logger. Per Python's logging semantics, a filter on a `Logger` only fires for records that *originate* at that logger — records propagated up from child loggers (every `backend.app.*` module — most of the application) never trigger it. Result: child-logger records arrived at the file handler with no `trace_id` attribute, the formatter raised `KeyError: 'trace_id'`, and `Handler.handleError` printed to stderr and dropped the record. `bambuddy.log` ended up with INFO/DEBUG records appearing only "partially" — exactly the records emitted directly through `logging.info(...)` (root logger) or `uvicorn.access` (which had its own explicit filter attachment) made it; everything else was discarded. Moved `_trace_id_filter` from `root_logger.addFilter()` to `console_handler.addFilter()` + `file_handler.addFilter()` — handler-level filters fire for every record the handler receives, regardless of which logger emitted it. The filter's own docstring already said "Attach to the file handler (or any handler whose format string references `%(trace_id)s`)" — the implementation was just wrong. New regression test in `test_trace.py::TestFilterMustBeAttachedToHandlerNotLogger` pins the contract: a child logger emits a record, propagation reaches the handler-level filter, the formatter sees a populated `trace_id` field, and the line is written. Existing 23 trace tests keep passing unchanged. Restart-shutdown recursion in journalctl was also a side effect — every shutdown log line was raising the formatter `ValueError`, which got caught and logged… raising again, forever, until the lifespan exit unwound; the new placement breaks the cycle since records now format cleanly.

- **User-cancelled prints surfaced as "1 problem" on the printer card AND were archived as "Layer shift" failures** — Cancelling a print left the printer card stuck on a permanent "1 problem" badge, *and* stamped the resulting archive entry with `failure_reason="Layer shift"` — a fake firmware-fault label in the print history. Affects every Bambu printer that emits a cancel-sequence HMS — the user surfaced it on an H2D where the firmware emits both `0300_400C` ("The task was canceled.") and the not-in-the-public-wiki `0C00_001B` echo as part of the cancel sequence. Four compounding causes, all fixed together. **(1) The direct stop endpoint never set the user-stopped flag.** `POST /printers/{id}/print/stop` (`backend/app/api/routes/printers.py`) sent the MQTT stop command but didn't call `mark_printer_stopped_by_user()`, so when the printer reported "failed" via MQTT the on_print_complete override (`main.py:2558`) couldn't reclassify it as "cancelled". The same flag *was* being set from `POST /print-queue/{id}/stop`, which is why queue-driven cancels mostly worked but printer-card cancels didn't. The direct endpoint now mirrors the queue path. **(2) The HMS → failure_reason heuristic was way too broad.** Old code mapped *any module 0x0C HMS* to "Layer shift" (`main.py:3072`), but module 0x0C is "Motion Controller" — covers cameras, visual markers, the BirdsEye assembly *and* the cancel-sequence HMS the firmware emits during a user-cancel. Real layer-shift codes actually live in module 0x03 (`0300_4057`, `0300_4068`, `0300_800C`). The same module-only heuristic was also being used to auto-label "Filament runout" (any 0x07) and "Clogged nozzle" (any 0x05), so the same false-positive class existed on those branches. Replaced the broad module heuristic with a curated short-code → reason map (`_HMS_FAILURE_REASONS`, 23 specific HMS codes from the real wiki); anything not in that map leaves `failure_reason=None` rather than guessing. Also extracted the logic into a pure function `derive_failure_reason(status, hms_errors)` so it's unit-testable without the full archive pipeline. **(3) Cancel-echo HMS codes were polluting `state.hms_errors`.** Even with (1) and (2) fixed, the printer card kept showing "1 problem" because the firmware kept reporting `0300_400C` ("The task was canceled.") in subsequent MQTT pushes — and `bambu_mqtt._update_state` was happily appending it to `state.hms_errors`, where the frontend's `filterKnownHMSErrors` accepted it as a valid known code (it IS in `ERROR_DESCRIPTIONS` — just describing a user action, not a fault). Added a parse-time filter (`_HMS_USER_ACTION_CODES = {"0300_400C", "0500_400E"}`) that drops these short codes before they ever enter the state, mirroring the suppression `main.py:_HMS_NOTIFICATION_SUPPRESS` was already doing for notifications. The card pip, the "X problem" badge, the modal, and any other consumer of `hms_errors` all get consistent behavior automatically. **(4) Frontend counted `gcode_state="FAILED"` without HMS as a problem.** Even with (1)–(3) fixed, the printer card *still* showed "1 problem" because the H2D's `gcode_state` sits at `FAILED` after a cancel until the next print starts, and `PrintersPage.tsx:940` (header badge) + `classifyPrinterStatus` (line 1028) + `BulkPrinterToolbar.tsx:102` all unconditionally bumped the `error` bucket on `case 'FAILED'`. Real failures attach an HMS error; user-cancels don't — so FAILED-without-HMS now buckets as `finished` (same operator meaning: print ended, plate may need clearing) and only escalates to `error` when there's an active known HMS. Same change applied across all three call sites for consistency. 20 regression tests total across three files: `test_failure_reason_derivation.py` (11 tests pinning the cancel-sequence HMS pair to NOT yield "Layer shift", unknown module-0x0C → None, real layer-shift/runout/clog codes still classify, int-vs-hex code-format tolerance, `status="cancelled"` symmetric with `"aborted"`), `test_bambu_mqtt.py::TestHMSUserActionFiltering` (4 tests pinning `0300_400C`/`0500_400E` filtering on both `hms[]` and `print_error` parse paths, real layer-shift `0300_4057` still passes through, mid-cancel concurrent real-fault keeps the real one and drops only the echo), and `PrintersPageBucketing.test.ts` (5 tests pinning FAILED-without-HMS → finished, FAILED-with-known-HMS → error, FAILED-with-only-unknown-HMS → finished, FINISH baseline unchanged, disconnected stays offline). Existing stale state on running printers clears on the next MQTT push that includes an `hms` key (printer firmware re-sends the list, parser filters it out, badge clears). Users with a stuck badge can also click the HMS modal "Clear" button to clear immediately via MQTT command.

- **Settings → API Keys: deleted key stayed on screen until manual reload** — the delete-key mutation marked the `['api-keys']` query stale via `queryClient.invalidateQueries`, which in v5 should also refetch active queries — but in practice the deleted row remained visible until the user reloaded the page. Switched the mutation's `onSuccess` to `queryClient.setQueryData` so the deleted key is filtered out of the cache synchronously the moment the API confirms; no refetch round-trip required, no chance for an invalidation→refetch race to leave the UI stale. Create-path keeps `invalidateQueries` since that one was working correctly. New `SettingsPage.test.tsx` test "removes a deleted key from the list without a page reload" pins the synchronous-removal contract.

- **SpoolBuddy AMS page: re-assigning a just-unassigned spool sometimes showed an empty picker** ([#1133](https://github.com/maziggy/bambuddy/issues/1133) follow-up) — Reported live during the rollout of the #1133 picker change: unassigning a Bambu PLA Metal spool from SpoolBuddy and re-opening the picker showed "no spools available" — the just-freed spool was missing. The investigation surfaced four distinct causes that all needed addressing for the picker to stay correct, plus a deployment-side cause that prevented any of the fixes from reaching the live kiosk. **(1) Dual cache-key shapes for spool assignments**: `SpoolBuddyAmsPage` keys by `['spool-assignments', selectedPrinterId]` while the shared `AssignSpoolModal` keys by `['spool-assignments']`, and `SpoolBuddyAmsPage.unassignMutation.onSuccess` only invalidated the printerId-keyed one, leaving the modal's unkeyed cache stale. Both invalidate calls (mutation success + modal-close handler) now hit both keys; collapsing the two key shapes into one is intentionally deferred since the dual-key pattern predates this change and shows up in 6 components. **(2) Toggle wasn't a real escape hatch**: the existing "Show all spools" toggle's label *said* it would help when a spool was hidden but only bypassed the material/profile filter, not the assignment-elsewhere gate. It now bypasses BOTH filters, making it a real escape hatch (the backend's `assign_spool` is upsert-per-(printer/ams/tray), so picking a currently-taken spool just creates a second assignment row — foot-gun for normal flows but exactly the recovery path this toggle is for). **(3) Cross-component cache pollution**: `['inventory-spools']` was used as a query key by 5+ components calling `getSpools()` with different `includeArchived` arguments — React Query treated them as one query and served whichever response landed first, so a SpoolBuddy component priming the cache with `getSpools(false)` could hide spools from the modal that wasn't yet present at that fetch time. The modal now uses its own dedicated key `['inventory-spools', 'assign-modal']` + `getSpools(true)` so it's never at the mercy of someone else's cache state. **(4) Empty-state had no diagnostic surface**: when the picker showed "No spools available" there was no way to tell *why* — was the fetch empty? Were spools archived? All assigned elsewhere? A small counter `X fetched · Y archived · Z assigned to other slots` now renders in the empty state so future reports of this kind are immediately answerable from a screenshot rather than requiring devtools digging. **(5) Browser holding stale JS forever**: `index.html` was being served without `Cache-Control` headers, so Chromium's heuristic-cache freshness window kept the OLD HTML "fresh" for days across browser restarts. The OLD HTML referenced an OLD content-hashed bundle, which was also still in disk cache, so the kiosk kept running pre-deploy JS *no matter how many times* its Chromium was restarted or cache-cleared — the persistent profile would re-seed the cache from disk on next start. Backend now sends `Cache-Control: no-cache, must-revalidate` on both `/` and the SPA catch-all that serve `index.html`; service worker `CACHE_NAME` bumped from `bambuddy-v25` to `bambuddy-v26` so any client that does eventually re-fetch `sw.js` invalidates its CacheStorage; and `spoolbuddy/install/install.sh` now generates the kiosk launcher with `--user-data-dir=/tmp/spoolbuddy-kiosk-userdata` plus a pre-launch `rm -rf` so every kiosk restart starts from a clean slate (the kiosk has no per-user state worth persisting — auth token is in the URL query, not a stored cookie). 6 net-new tests across `AssignSpoolModal.test.tsx` (toggle escape-hatch behavior) and `tests/integration/test_static_html_cache_headers.py` (Cache-Control directive on root + SPA catch-all routes, no leak onto API routes). Reproduced end-to-end on an H2D + dual AMS + SpoolBuddy display: unassign Bambu PLA Metal Iridium Gold Metallic from slot B4 → reopen picker → spool now visible without browser intervention.

- **Plate-clear button stayed visible after the API cleared `awaiting_plate_clear` outside the printer-card click path** ([#1128](https://github.com/maziggy/bambuddy/issues/1128)) — `awaiting_plate_clear` is a Bambuddy-side flag, not a printer-side one, so toggling it does not produce an MQTT push from the printer. Commit 4e86e8c added the flag to the `printer_status` payload so MQTT-driven broadcasts (e.g. when a print finishes and on_print_complete sets the flag to True alongside a state transition to FINISH) carry it correctly. The reverse transition didn't get the same treatment: `POST /printers/{id}/clear-plate` mutated `PrinterManager._awaiting_plate_clear` and persisted to the DB, but emitted no `printer_status` WebSocket update — and the in-`main.py` status-change broadcaster's `status_key` deduplication intentionally excludes Bambuddy-side flags, so even a coincidentally-arriving MQTT push wouldn't reflect the change. The "Mark plate as cleared" button on the printer card disappeared "immediately" after a click only because the React Query cache was being optimistically updated client-side; clearing the flag through any other route (an admin script, a second tab, an automation hitting the endpoint directly, the scheduler at `print_scheduler.py:1844` when dispatching the next queued print) silently left every UI subscriber but the originating tab stale until a coincidental status refresh. Centralised the broadcast in `PrinterManager.set_awaiting_plate_clear` itself rather than at each call site, so every current AND future caller is covered without remembering to wire it up: a new `_broadcast_status_change(printer_id)` private coroutine is scheduled alongside the existing `_persist_awaiting_plate_clear` whenever the flag flips under a running event loop. The broadcast lazy-imports `ws_manager` to keep `printer_manager.py` clean of application-layer infra at module-import time, short-circuits when `get_status` returns `None` (printer disconnected — the next reconnect produces a fresh push anyway), and swallows `ws_manager.send_printer_status` failures so the persistence path can complete even if the WS layer is temporarily unavailable. The same hook is now in place for any other Bambuddy-side flag that gets added to `printer_state_to_dict` later — they'll all need to broadcast their own changes for the same reason. 8 new regression tests in `test_printer_manager_status_broadcast.py`: schedules-on-True/False/loop-running/no-loop/loop-stopped contracts, `_broadcast_status_change` happy path with payload assertion, skip-when-no-state, swallow-WS-errors, and an end-to-end live-loop test that fires `set_awaiting_plate_clear(False)` and asserts a broadcast lands with `awaiting_plate_clear: false` in the payload. Existing 24 tests in `test_scheduler_clear_plate.py` continue to pass unchanged because they instantiate `PrinterManager()` without attaching a loop (sync unit-test path) — the new `_schedule_async` call short-circuits on the same loop check the existing persistence call already used. Thanks to @EdwardChamberlain for the precise root-cause analysis (down to the exact line and the suggested `ws_manager.send_printer_status()` fix).

- **Uvicorn HTTP access log was missing from `bambuddy.log`, leaving rogue server-state changes untraceable** — When an HTTP endpoint that mutates server state fires unexpectedly (the canonical example: a print spontaneously stopping mid-job because something hit `POST /printers/{id}/print/stop`), the only on-disk trail was Bambuddy's own application log — which by design only records the *outbound* MQTT publish (`Sent stop print command`), not the *inbound* HTTP call that triggered it. The result was an unsolvable mystery on 2026-04-26: prints stopping with no preceding Bambuddy-side log line, no way to identify the caller, and the rotated container stdout already gone by the time the support pack was generated. Root cause: uvicorn ships its `access` logger with `propagate=False` by default, so the existing `RotatingFileHandler` attached to root never received those records. `main.py` now attaches the same file handler directly to `logging.getLogger("uvicorn.access")` and applies a new `WriteRequestsOnlyFilter` (`backend/app/core/logging_filters.py`) that keeps `POST` / `PUT` / `PATCH` / `DELETE` and drops `GET` / `HEAD` / `OPTIONS`. Status polls, camera streams, snapshot fetches, websocket upgrades, and CORS preflights account for the bulk of access traffic on a running install and none of them can change server state on their own — dropping them keeps `bambuddy.log` focused on lines that matter for incident triage without churning the 5 MB rotation window faster than it's useful. Filter anchors on the `" `+verb+` ` pattern uvicorn's format string guarantees, so a literal `"POST"` substring inside a URL (e.g. `GET /api/posts/POST_123`) cannot false-match. The filter lives in its own module so the test suite can import it without pulling in `main.py`'s entire startup graph. 13 new tests in `test_logging_filters.py` cover all four write verbs being kept, GET/HEAD/OPTIONS being dropped, two URL-contains-verb-substring false-match guards, empty/unrelated-line/idempotency edge cases. Output now looks like `2026-04-26 09:23:14,690 INFO [uvicorn.access] 192.168.1.42:54812 - "POST /api/v1/printers/1/print/stop HTTP/1.1" 200` — one `grep "POST.*stop"` away from "who triggered this".

- **Spool auto-assign hit `IntegrityError` on Postgres when AMS pushes arrived in quick succession** — Bambu MQTT can deliver two `ams_data` push frames for the same printer ~30 ms apart (observed on H2D + dual AMS at K-profile-load / RFID-read boundaries). Each frame triggers `on_ams_change` in `backend/app/main.py`, whose auto-assign block reads `(printer_id, ams_id, tray_id)`, decides "no existing assignment", and INSERTs via `auto_assign_spool` — and the two callbacks raced in their respective sessions, both deciding to insert, with the second commit losing on `spool_assignment_printer_id_ams_id_tray_id_key`. SQLite's WAL serial-write semantics had been silently swallowing the race for ~7 weeks since the spool-assignment feature shipped (latent in `ec82092b`); when optional Postgres support landed in `610431d6` and asyncpg started allowing true concurrent transactions, it surfaced as `WARNING [main] RFID spool auto-assign failed: ... duplicate key value violates unique constraint ...; DETAIL: Key (printer_id, ams_id, tray_id)=(1, 0, 0) already exists`. Added a per-printer `asyncio.Lock` (`_ams_assignment_locks` keyed by `printer_id`) wrapping the auto-assign critical section so two callbacks for the same printer serialise — by the time the second one's session runs `select(SpoolAssignment).where(...)`, the first's commit is visible and the early-return "existing assignment" branch fires instead of a duplicate INSERT. The Spoolman sync block further down in the same callback intentionally stays OUTSIDE the lock — it's network-bound and idempotent, so serialising it would block subsequent AMS callbacks for the duration of a remote roundtrip. Per-printer scope keeps unrelated printers fully parallel: one printer's slow assignment never blocks another's. The auto-unlink block above the assign block isn't wrapped because its DELETE/UPDATE operations don't have the same constraint surface; the assign-block lock is sufficient because the second callback's `select` will see the first's committed state. 5 new regression tests in `test_ams_assignment_lock.py` cover same-printer-same-lock identity, different-printers-different-lock isolation, second acquirer waits for first inside the lock (proves serialisation), different printers run truly in parallel under a held lock (proves per-printer scope), and an auto-cleanup fixture resets the module-level dict between tests so cross-test loop affinity bugs can't surface.

- **Camera TLS proxy logged "Unhandled exception in client_connected_cb" when ffmpeg dropped its half of the connection mid-stream under uvloop** — The bidirectional forwarders inside `services/camera.py::create_tls_proxy._handle` (the OpenSSL TLS shim added in [#661](https://github.com/maziggy/bambuddy/pull/661) so Bambu's RTSPS handshake works around Debian GnuTLS hardening) caught `(ConnectionError, OSError, asyncio.CancelledError)` on writes, but uvloop's `UVStream.write` raises a plain `RuntimeError` from `UVHandle._ensure_alive` when the underlying handle is already closed. asyncio's default selector loop reports the same situation as `ConnectionResetError`, so the bug only surfaced on uvloop deployments — and only at the moment the client (typically ffmpeg or a snapshot-capture subprocess) tore down its socket while the proxy was mid-flush. The `RuntimeError` slipped past the except tuple, escaped the forwarder coroutine, and asyncio's `client_connected_cb` task-exception handler logged a noisy multi-line traceback ending in `RuntimeError: unable to perform operation on <TCPTransport closed=True ...>; the handler is closed`. Added `RuntimeError` to the except tuple in both `_fwd_to_server` and `_fwd_to_client` (the latter being the actual frame in the bug report — server→client is where buffered TLS chunks land after the client has gone). The forwarders are intentionally fire-and-forget on tear-down; once either peer drops, both halves of the proxy should exit quietly and the existing `dst.close()` in the `finally` block already handles cleanup. No functional regression possible — the connection is already dead by the time the exception fires; this only changes whether asyncio logs an "Unhandled exception" trace for it. 2 new regression contract tests in `test_camera_tls_proxy.py` use `inspect.getsource` to assert both forwarder closures' except clauses include `RuntimeError`, since the closures are nested inside `_handle` and extracting them just for testability would require a pure-cosmetic refactor of the proxy.

- **Background-dispatch reported "Print started successfully" when the printer never actually transitioned** ([#1134](https://github.com/maziggy/bambuddy/issues/1134), follow-up to [#1042](https://github.com/maziggy/bambuddy/issues/1042)) — The int32 `task_id` modulo fix that was the original root cause of #1042 is verified working in the reporter's most recent support pack (the published `task_id` values are well below 2^31-1 and match the `int(time.time() * 1000) % 2_147_483_647` formula exactly). The remaining residual — "the UI reports despatch success which is slightly misleading" — was a real second bug class: the post-dispatch watchdog `_verify_print_response` in `services/background_dispatch.py` was *fire-and-forget*. It would correctly detect that the printer never transitioned (e.g. P1S sitting in `gcode_state: FAILED` with HMS `0300_400C` "task was canceled", a half-broken MQTT session, an SD card error, or any other pre-print blocker), log a `did not respond to print command within 15s` warning, force-reconnect the MQTT session — and then return without touching the dispatch job state. The dispatch job had already been marked successful on the optimistic MQTT-publish-acknowledged path, so the UI carried on showing "Print started successfully" while the printer sat idle. The watchdog now returns a `bool` and is awaited inline by both call sites (`_run_reprint_archive` at line 687, `_run_print_library_file` at line 860); on `False` (timeout) the call sites raise a `RuntimeError` carrying a user-actionable message ("Printer did not acknowledge print command — state still {pre_state}. Check the printer for a pending error (HMS code, plate-clear prompt, SD card) and try again."), which routes through the existing `_mark_job_finished(failed=True, …)` path so the dispatch UI shows a real failure toast and the library-file flow's freshly-created archive is `db.rollback()`'d (no orphan rows for prints that never started). The watchdog now also accepts `subtask_id` advancing past the captured `pre_subtask_id` as a definitive "command landed" signal — same as the queue-side watchdog at `print_scheduler.py:1992` (#1078) — so slow H2D `FINISH→PREPARE` transitions (~50 s observed) don't false-fail when the printer has clearly accepted the project_file but is still in FINISH. Default timeout raised from 15 s to 90 s to match the queue-side watchdog (#967 / #1078) and give the same headroom on both dispatch paths. Brief mid-window MQTT disconnects (`get_status() is None` for one tick) now keep polling instead of immediately failing — matches what the queue watchdog already does and avoids false-failing on transient telemetry gaps. The existing `force_reconnect_stale_session` recovery is preserved on the timeout path. 8 new regression tests in `test_background_dispatch_watchdog.py` cover state-change pickup, subtask_id-change pickup with state still FINISH (the H2D case), neither-signal-changed timeout + force-reconnect, pre_subtask_id=None backwards-compat, post-dispatch subtask_id=None not counting as a change (avoids false-pass on transient reconnect), brief disconnect not short-circuiting the window, persistent disconnect for the full window returning False, and a contract test that the default timeout is 90 s. Thanks to @EdwardChamberlain for the detailed retest with logs that pinpointed the watchdog's no-propagation gap.

- **Bambu RFID auto-match created duplicate inventory rows for Quick-Add and non-Bambu-branded spools** ([#918](https://github.com/maziggy/bambuddy/issues/918)) — `find_matching_untagged_spool` is supposed to attach a Bambu RFID UID to a pre-existing manually-logged spool of the same material/color so users who log inventory before scanning don't end up with a duplicate row on first AMS read. Two bugs in the matcher meant it almost never worked for the actual reporting workflow: **(1)** the subtype filter was strict — when the AMS tray reports `tray_sub_brands="PLA Basic"` the matcher required `Spool.subtype = 'Basic'` exactly, so any Quick-Add row (Quick-Add only requires `material`, leaving `subtype=NULL`) was excluded and duplicated on first AMS read. **(2)** the docstring claimed it filtered on brand but the WHERE clause didn't, so a same-color *Polymaker* untagged spool would silently acquire a Bambu Lab tray UUID, leaving the user with `brand="Polymaker"` but a Bambu UUID — silent data corruption. Both bugs are addressed in the same query: subtype now prefers an exact match but accepts a NULL-subtype row as fallback (with a `CASE` in `ORDER BY` so an exact match still wins when both exist), and brand is now restricted to "contains 'bambu' (case-insensitive)" or NULL — matching `'Bambu'` (the form's `DEFAULT_BRANDS` value), `'Bambu Lab'` (the catalog value), `'BambuLab'`, `'bambu lab'`, etc., while rejecting any explicitly-named third-party brand. 6 new regression tests in `test_spool_tag_matcher.py` cover the NULL-subtype fallback, exact-subtype-wins-over-NULL ordering, non-Bambu brand rejection, NULL brand acceptance, all four Bambu brand spelling variants, and the full Quick-Add scenario (`brand=NULL` + `subtype=NULL`). The broader UI proposals in #918 (manual override / merge / disambiguation prompt) are intentionally out of scope — once the matcher works, the duplicate-on-RFID complaint that motivated those proposals goes away. Thanks to @ViridityCorn for the report and pointing at the right function, and to @Arn0uDz for confirming with a 20-spool repro.
- **Swagger UI link in Settings → API Keys rendered a blank page** — the global CSP applied by `security_headers_middleware` set `script-src 'self'` and `style-src 'self' 'unsafe-inline' https://fonts.googleapis.com`, which blocked both the inline `<script>` that boots Swagger and the `cdn.jsdelivr.net` URL that ships `swagger-ui-bundle.js` / `swagger-ui.css`. FastAPI's `/docs` page therefore loaded a 1 KB shell with no JS executed, leaving an empty white page. The middleware now emits a docs-scoped CSP for `/docs`, `/redoc`, and `/docs/oauth2-redirect` that allows `https://cdn.jsdelivr.net` for scripts + styles, the FastAPI/Redoc favicon hosts for images, and `'unsafe-inline'` for the Swagger boot script — every other route keeps the unchanged stricter SPA policy.
- **Camera stream second viewer fails / kicks the first off** ([#1089](https://github.com/maziggy/bambuddy/issues/1089)) — Most Bambu Lab printers only allow one concurrent camera connection (RTSP socket on X1/H2/P2, port-6000 chamber-image socket on A1/P1), but `GET /printers/{id}/camera/stream` opened a fresh upstream per viewer keyed on a per-request `stream_id`. Two browser tabs / two dashboard cards → the second viewer either failed silently or kicked the first one off. New `services/camera_fanout.py::MjpegBroadcaster` owns a single upstream per printer and fans pre-formatted MJPEG chunks out to N subscriber queues; new viewers tap the existing connection. When the last subscriber leaves, the upstream stays alive for a 5 s grace window so a tab refresh or "open in new tab" doesn't pay an ffmpeg/RTSP reconnect, then tears down cleanly. Per-subscriber queues are bounded (depth 4) so a slow viewer drops frames for itself rather than blocking the broadcaster — live video, old frames have no value. Stop endpoint and app-shutdown both call into the broadcaster's force-shutdown path so subscribers wake up via an upstream-gone sentinel instead of hanging on `queue.get()`. External-camera path is unchanged (user-supplied MJPEG/RTSP servers handle multi-viewer themselves). The upstream uses a deterministic `{printer_id}-fanout` stream id so every existing prefix-match in `cleanup_orphaned_streams`, `camera_status`, the snapshot fall-through in `main.py`, and the `stop` endpoint continues to find it without changes. Two follow-up correctness fixes from the audit pass: (1) `_stream_start_times[printer_id]` is now set with `setdefault()` so `/camera/status` reports the SHARED upstream's age — previously each new viewer overwrote it, making `stream_uptime` jump backward whenever a second viewer attached; (2) the route now retries `subscribe()` once on `RuntimeError` to close a tiny race where the grace teardown can flip the broadcaster to `stopped` between the registry lookup and the subscribe call (the retry forces the registry to mint a fresh broadcaster). Detach log line shows the post-unsubscribe count returned atomically by `unsubscribe()` — no more two viewers leaving simultaneously both reporting `subscribers=0`. Permission gates unchanged: `/camera/stream` still requires the existing token (minted by `POST /camera/stream-token` with `CAMERA_VIEW`); `/camera/stop` still requires `CAMERA_VIEW`; the broadcaster is internal infra with no FastAPI surface. 13 unit tests for the broadcaster (single subscriber, multi-subscriber-shares-one-pump, slow-subscriber-doesn't-block-fast, grace-window teardown, grace-cancelled-on-rejoin, force-shutdown sentinel, `iter_subscriber` exits on upstream-gone and on client-disconnect, registry replaces stopped broadcasters, `subscribe()` raises on stopped broadcaster, `unsubscribe()` returns post-removal count atomically across concurrent leavers, double-unsubscribe is idempotent, and the route's force-shutdown-then-fresh-subscribe retry path) plus 2 new integration tests on the stop endpoint covering the deterministic fan-out stream id and the `shutdown_broadcaster` wiring. Thanks to @swheettaos for the diagnosis and broadcaster sketch.
- **Uploads to writable external folders silently landed in internal storage** ([#1112](https://github.com/maziggy/bambuddy/issues/1112)) — `LibraryFolder` has an `external_readonly` flag, so the model already distinguishes writable from read-only external mounts, but `POST /library/files` rejected only the read-only branch and then unconditionally wrote to `get_library_files_dir()` with a UUID-scoped filename. The resulting `LibraryFile` row linked back to the external folder via `folder_id`, so the file showed up in the Bambuddy UI and could be printed, but the bytes physically lived in `archive/library/files/` and never touched the mount — invisible from any other machine accessing the same NAS/SMB share. New `_resolve_upload_destination()` helper detects writable external targets and writes through to `<external_path>/<filename>` (keeping the original filename so the file is recognisable on the mount), with guards for missing/inaccessible path (400), non-writable mount (400), pre-existing filename on the mount (409 — no silent overwrite; the user is expected to rename and retry, matching how scan treats external files as externally-owned bytes), and a `resolve + relative_to` path-traversal guard on the joined destination. DB row now matches what scan produces: `is_external=True`, `file_path=<absolute external path>`, so the existing download / delete / dedupe paths work unchanged (`to_absolute_path` already fast-paths `is_absolute()` inputs, and external-file deletion already bypasses trash and only drops the DB row + internal thumbnail). `POST /library/files/extract-zip` is now rejected against *any* external folder (not just read-only) with a clear "extract the ZIP on the external mount and run Scan" message — the nested-subfolder creation path would need to `mkdir` on the mount and create matching `is_external=True` `LibraryFolder` rows, which is a separate design round, and the Scan flow already handles that shape. 7 new integration tests cover: bytes land on the mount; DB row has `is_external=True` + absolute `file_path`; filename collision → 409 with prior bytes preserved; vanished external path → 400; path-traversal filename never escapes the external dir; extract-zip into writable external rejected with the Scan hint; root uploads unchanged.
- **Queue item stuck at "printing" when print failed before reaching RUNNING** ([#1111](https://github.com/maziggy/bambuddy/issues/1111)) — Dispatching a file sliced for the wrong nozzle size (or any other pre-print error: AMS fault, wrong plate, nozzle not installed, etc.) left the queue item stuck at `status="printing"` forever, blocking every subsequent pending item for that printer (`check_queue` seeds `busy_printers` from any row in `'printing'` state and skips further dispatches for those printer IDs). Completion detection in `BambuMQTTClient._process_message` required the print to have reached `RUNNING` — either via `_previous_gcode_state == "RUNNING"` or the `_was_running` fallback — but a nozzle-mismatch failure transitions the printer `IDLE → PREPARE → FAILED` without ever entering `RUNNING`, so neither branch matched and `on_print_complete` never fired. The diagnostic log line at `bambu_mqtt.py:2690` ("State is FAILED but completion NOT triggered: prev=PREPARE, was_running=False") confirmed the path. Completion now also fires on `FAILED` from a pre-print state (`PREPARE` or `SLICING`) — restricted to those two so a stale `FAILED` on first connection (prev=None) still can't accidentally advance an unrelated queue item. Additionally, when a queue item transitions to `failed` the handler in `main.py` now populates `error_message` from the printer's current HMS error list, rendered via the existing `backend/app/services/hms_errors.py` lookup table (e.g. `[0500_4038] The nozzle diameter in sliced file is not consistent with the current nozzle setting. This file can't be printed.`) — previously `error_message` was left `NULL`, so users saw "failed" with no hint at the cause. 5 new unit tests in `TestPrePrintFailureCompletion` cover PREPARE→FAILED and SLICING→FAILED firing, IDLE→FAILED and initial-FAILED *not* firing (boot-time safety), and HMS errors being passed through in the callback payload; 6 new tests in `test_hms_error_summary.py` cover the error-message formatter (known-code lookup, unknown-code fallback, multi-error join, malformed-entry tolerance, all-malformed → None, empty → None). Thanks to @MartinNYHC for the report.
- **Tailscale cert-renewal restart silently failed mid-way** (follow-up to [#1070](https://github.com/maziggy/bambuddy/issues/1070)) — The daily renewal path creates an `asyncio.Task` to restart VP services with the new cert. Inside that task, `stop_server()` / `stop_proxy()` call `_cancel_restart_task()`, which cancelled+awaited the currently-running task (itself). The self-await raised `RuntimeError`, got caught by the broad exception handler, but the cancel flag was still set — so the next `await` in `stop_server` raised `CancelledError` and aborted the restart partway through. The VP kept running the OLD expired cert until the process was manually restarted, silently defeating the feature. `_cancel_restart_task` now checks `asyncio.current_task()` and skips the cancel+await when the caller IS the restart task itself. Two new regression tests cover the self-cancel and outside-cancel paths.
- **Settings table filled with duplicate rows on legacy SQLite installs** — pre-UNIQUE-constraint databases stored the `settings.key` column without a unique index, so the seed loop's `INSERT OR IGNORE` silently degraded to a plain INSERT and every `systemctl restart bambuddy` added another row of `advanced_auth_enabled` / `smtp_auth_enabled`. After a handful of restarts, `scalar_one_or_none()` in `is_advanced_auth_enabled` and similar sites blew up with `MultipleResultsFound`, 500'ing the login flow. `run_migrations` now dedupes (keeps MIN(id) per key) and creates the missing `ix_settings_key` unique index before the seed loop runs. Postgres installs were unaffected. 4 new regression tests cover legacy-with-dupes, legacy-already-clean (idempotent), and fresh-install (no-op) paths.
- **Virtual printer card's Tailscale FQDN copy button failed on HTTP** — `navigator.clipboard.writeText` is only available in secure contexts (HTTPS / localhost). When Bambuddy is reached over plain HTTP via a LAN or Tailscale IP, the clipboard API is blocked and the copy button silently failed with a generic "Failed to update settings" toast. Added a legacy `document.execCommand('copy')` fallback via a hidden textarea for non-secure contexts; the textarea is removed in a `finally` block so it doesn't leak into the DOM on exception paths. New `virtualPrinter.toast.copyFailed` i18n key across all 8 locales for the rare case where both paths fail.
- **Install script failed for first-time users** — three separate permission issues in `install/install.sh` stopped the native installer mid-way: (a) `download_bambuddy` chowned the empty install dir to the service user BEFORE running `git clone` as the current user → permission denied on `.git`; (b) `setup_virtualenv` created the venv as the service user but then ran `pip install --upgrade pip` as the current user → permission denied writing `venv/bin/pip`; (c) `build_frontend` would have hit the same pattern on `npm ci`. All three now route through `sudo -u "$SERVICE_USER"` (or `sudo -H -u` for npm so HOME is set correctly for the npm cache). The git-clone fix runs as root then chowns the tree. macOS path unchanged (no service user there).
- **H2C dual-nozzle detection missed post-2026 serial batches** ([#1105](https://github.com/maziggy/bambuddy/issues/1105)) — Bambu has started shipping H2C units with a new serial prefix (`31B8B…` observed on a January 2026 unit) instead of the legacy `094…` shared by the H2D/H2C/H2S family. The K-profile edit flow (`backend/app/api/routes/kprofiles.py`) and the delete-K-profile MQTT path (`backend/app/services/bambu_mqtt.py::delete_kprofile`) branch on serial prefix to pick the dual-nozzle command format, so units with the new prefix were silently falling into the single-nozzle branch and getting the wrong K-profile payload shape. Added `31B8B` (5-char match covering the model code + revision bytes, leaving the revision-letter slot free to iterate) alongside the existing `094` and `20P9` prefixes; runtime paths that auto-detect dual-nozzle from `device.extruder.info` were already prefix-agnostic. New regression test `test_h2c_new_prefix_uses_dual_nozzle_format` in `test_bambu_mqtt.py`. Thanks to @m4rtini2 for the report.
- **Spoolman iframe silently blank on HTTPS Bambuddy with HTTP Spoolman** ([#1096](https://github.com/maziggy/bambuddy/issues/1096)) — Users behind an HTTPS reverse proxy (Traefik / Nginx / Caddy) pointing the Spoolman URL at plain HTTP saw the Filament tab render as a blank page with only a console-side `Mixed Content` warning. CSP was fine (the `#1054` fix already allowed `frame-src http:`), but browsers enforce mixed-content blocking independently of CSP — an HTTP iframe inside an HTTPS parent is always blocked. Bambuddy can't technically fix this (the browser is correct to refuse), so instead of the silent blank frame the Filament page now detects the protocol mismatch (`window.location.protocol === 'https:'` plus Spoolman URL starting with `http://`) and renders an inline warning card explaining the root cause, pointing users at the right fix (put Spoolman behind the same HTTPS reverse proxy and update the Spoolman URL in Settings), and offering an "Open Spoolman in a new tab" button as an immediate workaround — a standalone tab isn't subject to mixed-content rules. Localised across all 8 UI languages. Thanks to @jsapede for the report.
- **Reprint-from-Archive left `created_by_id` as `NULL`** ([#730](https://github.com/maziggy/bambuddy/issues/730) follow-up) — 0.2.4b1 fixed user attribution for Direct Print / File Manager / Library prints, but the reprint path was still unattributed on the *archive* row. Reprint intentionally reuses the source archive (to avoid duplicate rows — see `register_expected_print`), so an archive auto-created from a printer-initiated print with no known user stayed `created_by_id=NULL` forever, even after multiple reprints by authenticated Bambuddy users. Print Log got the reprinter's username correctly (via `_print_user_info`), but the Statistics per-user filter — which reads `archive.created_by_id` — kept showing the archive as unassigned. Fix in `main.py`'s print-complete handler: when the archive has no `created_by_id` and a print-session user is set (which reprint always sets via `set_current_print_user`), back-fill the archive's attribution. Never overwrites an existing attribution — the original uploader keeps ownership; NULL archives are the only ones touched. Thanks to @3823u44238 for the detailed retest that caught this.
- **Settings: failed-save toast looped forever when the user lacked `settings:update`** — the Settings page runs a debounced auto-save effect that fires `PATCH /settings` whenever `localSettings` diverges from the last server snapshot. When a delegated user with `settings:read` but not `settings:update` toggled a control, the effect fired `PATCH`, got `403`, and kept re-firing every ~500 ms producing an endless stream of identical "Failed to save" toasts. Gated at three points so the mutation is never attempted without permission: (1) the `updateSetting` callback — every onChange path — shows one `settings.toast.noPermissionUpdate` toast and short-circuits before diverging `localSettings`; (2) the debounced-save effect safety-nets the same check in case any call site bypassed `updateSetting`; (3) the language `<select>` was a fire-and-forget direct `api.updateSettings` call that always flashed a success toast regardless of outcome — it now goes through `updateMutation` with the same permission guard. New `settings.toast.noPermissionUpdate` key added across all 8 locales with full translations (not English-fallback).
- **Groups: edits to custom-group permissions appeared lost on reopen** ([#1083](https://github.com/maziggy/bambuddy/issues/1083)) — creating a custom group and reopening the editor showed the correct permissions, but after editing that group's permissions and saving, reopening the editor within ~1 minute displayed the pre-edit snapshot as if the save had failed. The backend `PATCH /api/v1/groups/{id}` was persisting correctly (now covered by four new integration tests in `test_groups_api.py`, including a direct DB read after update); the issue was purely in the frontend React Query cache — `GroupEditPage.onSuccess` invalidated `['groups']` (the list) but left the `['group', id]` detail cache stale, and with the app-wide 60 s `staleTime` the next mount served the cached pre-update body instead of refetching. `onSuccess` now primes the `['group', id]` detail cache with the `PATCH` response body so the next mount hits fresh data immediately without a round-trip. Create-path invalidates `['group']` for symmetry. Regression test in `GroupEditPage.test.tsx` verifies the detail cache contains the updated permissions after save.
- **Setup: re-enabling auth could 422 on a password the form no longer needs** — after disabling authentication and re-enabling it (common when switching between local auth and LDAP, or recovering from a bad config), the setup form still sends `admin_password` in the body even though the backend route ignores it when an admin user already exists. The `SetupRequest` Pydantic schema enforced password complexity (uppercase + lowercase + digit + special char) unconditionally, so any existing password that predated the complexity rule — or a legitimate LDAP-mode placeholder — triggered `422 Value error, Password must contain at least one special character` before the route body could decide to ignore the field. Complexity validation has moved out of the schema and into the route body, scoped to the branch that actually creates a new local admin. Re-enabling auth with an existing admin (or any LDAP user) now accepts whatever the form sends; fresh first-time setup still rejects weak passwords with a clear 400. Two regression tests added in `test_auth_api.py`: weak password rejected at setup when creating the first admin, weak/placeholder password accepted when an admin already exists.
- **Queue: batch (quantity>1) double-dispatched onto the same printer** — scheduling an ASAP print with `quantity > 1` could end up with two queue items in `'printing'` status for the same printer, surfaced in the logs as `BUG: Multiple queue items in 'printing' status for printer N`. The scheduler's in-memory `busy_printers` set was seeded empty each tick and only populated after `_start_print` succeeded in the current iteration, so on the next tick (30 s later) `_is_printer_idle()` read the printer's live MQTT state — which on H2D / P1 series lags several seconds behind the print command and still reported `IDLE` / `FINISH` — and dispatched the second batch item onto the already-running printer. `check_queue()` now queries `PrintQueueItem` for `status='printing'` rows and seeds `busy_printers` with their printer IDs before iterating pending items, so any printer with an outstanding dispatched job is excluded regardless of what MQTT currently reports. Regression covered in `test_phantom_print_hardening.py` (`TestBusyPrinterSeedingFromPrintingItems`): seeding query returns printers with `'printing'` rows only, returns empty when none exist, and end-to-end `check_queue()` does not call `_start_print` for a pending item whose printer already has a `'printing'` row even when `_is_printer_idle()` is forced `True`.
- **Queue: active-item progress bar flashed 100% before dropping to 0%** — immediately after a queue item was dispatched, the per-item progress bar on the Queue page showed 100% (or whatever the prior print's final `mc_percent` was) for the few seconds between dispatch and the printer's MQTT state transitioning to `RUNNING`. Frontend `QueuePage.tsx` read `status.progress` directly from the printer's live MQTT snapshot, which carries over the last reported value from the previous print until the new one starts ticking. The progress bar, remaining time, ETA, and layer counter are now gated on `status.state` being `RUNNING` or `PAUSE`; in any other state (including `FINISH` from the prior print, `IDLE`, or `PREPARE` while heating) the bar renders at 0% with no stale ETA/layer values.
- **i18n placeholder mismatches in Japanese rendered literal `{{count}}` / `{{name}}` strings in the UI** — 27 `ja` strings had drifted from the en placeholder names: `printers.activeNozzle` used `{{side}}` while the runtime passes `nozzle`; `archives.card.layers` / `queue.addedBy` / `maintenance.days` / `groups.form.permissions` and 22 others either lost their placeholders entirely (translator dropped them) or used renamed keys (`{{count}}` → `{{username}}`). i18next can't bind a placeholder it doesn't see, so the count would silently disappear or — for `{{count}}` keys — render the raw `{{count}}` token in the UI. Backfilled all 27 to match en's placeholder set so interpolation resolves; the parity check now reports zero placeholder mismatches across all 8 locales. Same pass also fixed one `fr` mismatch (`projects.noProjectsFilteredHelp` lost `{{status}}`).
- **"Open in Slicer" fails on Windows / Linux for any filename containing spaces or special characters** ([#1059](https://github.com/maziggy/bambuddy/issues/1059)) — clicking "Open in Slicer" from the File Manager or Archives page produced one of three symptoms depending on the file: `.3mf` files opened Bambu Studio / OrcaSlicer but the app showed "Importing to Bambu Studio failed. Please download the file and open it manually" (the file on disk was 0 bytes); `.stl` files greyed the button out; `.step` couldn't be previewed at all. The protocol-handler URL emitted by `frontend/src/utils/slicer.ts` for OrcaSlicer (`orcaslicer://open?file=<URL>`) and Windows/Linux Bambu Studio (`bambustudio://open?file=<URL>`) was built by plain string concatenation with no `encodeURIComponent()` — the macOS `bambustudioopen://<URL>` branch was already encoding correctly, which is why macOS users didn't see this. A stale comment block in the file claimed the browser preserves the URL in the query string so no encoding is needed; that's true for the browser-to-OS handoff but ignores that the slicer itself calls `url_decode()` on the received query (BS `post_init()` calls `url_decode` then `split_str`; OrcaSlicer's Downloader regex-extracts then `url_decode`). Any already-percent-encoded character in the download URL — most commonly `%20` from filenames with spaces, which Bambuddy's archive paths produce naturally — decoded to a literal space and the slicer's subsequent HTTP GET came back 0 bytes or 404. All three URL forms now `encodeURIComponent()` the file URL, so the slicer sees the correctly-encoded URL after its own `url_decode`. The comment block is corrected to document the actual invariant. Regression test in `slicer.test.ts` feeds the exact issue reproduction URL (`Toothpick%20Launcher%20Print-in-Place.3mf`) and asserts `%2520` appears in the generated `orcaslicer://` href — so any future refactor that drops the encoding fails CI. Thanks to @jsapede for the double-encoding diagnosis and @AllanonBrooks and @lunaticds for the original reports.

### Security
- **postcss bumped to 8.5.12 to clear GHSA-qx2v-qp2m-jg93** — moderate-severity advisory: PostCSS < 8.5.10 has an XSS via an unescaped `</style>` sequence in its CSS Stringify output. The caret range in `frontend/package.json` already accepted 8.5.12, so this is a lockfile-only bump; vite, autoprefixer, and `@tailwindcss/postcss` all dedupe onto the same 8.5.12 with no nested copies left in `node_modules`. PostCSS runs at build time only and Bambuddy doesn't pass user-controlled CSS through it at runtime, so the practical impact even on the older version was nil — this is hygiene + clearing the `npm audit` warning.

## [0.2.3.2] - 2026-04-22

### Improved
- **GCode Viewer Reshaped as an Archive Preview Tool** ([#963](https://github.com/maziggy/bambuddy/pull/963) follow-up) — PR #963 landed the embedded PrettyGCode viewer with a library file picker, a connected-printer selector with live WebSocket status, and auto-load of the currently-printing file. In practice those three didn't match Bambuddy's data model: the library file picker only listed `.gcode` files (Bambuddy stores `.gcode.3mf`), the printer selector wasn't useful when the real goal is previewing an existing archive, and the auto-load path had the same `.gcode`-filter gap as the picker. The viewer is now scoped to a single focused workflow — "show me the G-code for this archive" — reached from the Archives page 3D-preview button (menu item + the card-corner badge + list-row menu, all three paths navigate the same way). Entry URL is `/gcode-viewer?archive=<id>[&plate=<N>]`; the route falls through to the SPA catch-all so a full-page reload keeps the Bambuddy layout shell, with the iframe at `/gcode-viewer/?archive=<id>…` serving the raw viewer. Bed size is fetched from `GET /archives/{id}/capabilities.build_volume` (already parsing `printable_area` + `printable_height` from the 3MF's `Metadata/project_settings.config`) so any printer model renders the correct bed — 350×320×325 for H2D etc. — with no hardcoded per-model map to maintain. Multi-plate archives now surface a dedicated plate picker modal (`components/PlatePickerModal.tsx`) with thumbnails and object lists matching the existing Re-print modal's visual language; source-only 3MFs (no sliced gcode) show a `archives.platePicker.noGcode` toast instead of sending the user to an empty viewer. Behind the scenes: `GET /archives/{id}/gcode` accepts `?plate=N` and resolves the filename by integer-matching the suffix (zero-padded names like `Metadata/plate_01.gcode` now resolve as plate 1, fixing a class of picker-claimed-but-404 archives); `GET /archives/{id}/plates` gained a top-level `has_gcode: bool` flag so the frontend can suppress the picker when the archive is source-only; `printer_state_to_dict` now injects `name` and `model` into every WebSocket snapshot so consumers don't race a separate `/printers` fetch for proper labels. Removed from the viewer: printer selector + WS subscription, library file picker, `BAMBU_BED_SIZES` hardcoded map, auto-load-currently-printing, sidebar nav entry, 32 orphaned `gcodeViewer` locale keys, and the unreachable `ModelViewerModal` render paths on archive cards (the File Manager still uses `ModelViewerModal` for library file previews — scope preserved). Added test coverage: `?plate=N` happy path, zero-padded filename resolution, missing-plate 404, no-plate fallback to first, `?plate=0` 400 rejection, `has_gcode=true/false` branch, plus `PlatePickerModal.test.tsx` (6 tests covering render, plate-name label, onSelect payload, backdrop close, thumbnail fallback) and `printer_state_to_dict` name/model surfacing tests. A toast replaces the old silent empty viewer for source-only archives; reload stays in the Bambuddy layout; H2D previews no longer overflow the bed.

### Improved
- **Printer Card Shows Plate Name on Multi-Plate Prints** ([#881](https://github.com/maziggy/bambuddy/issues/881)) — When two printers were running different plates of the same multi-plate 3MF, the Printers page cards displayed the same file name on both and gave no visual way to tell them apart. The Queue view already showed the plate name by querying the archive's plate list; the Printers page didn't have that linkage. The `GET /printers/{id}/status` endpoint now returns `current_archive_id` (resolved by matching the MQTT `subtask_id` against `PrintArchive.subtask_id`, the same bridge introduced in #972 for restart-resume) and `current_plate_id` (parsed from the MQTT `gcode_file` path by a new shared `parse_plate_id` helper that's also used by the WebSocket push path, so plate transitions within a running print reflect immediately instead of waiting 30 s for the next REST poll). The card fetches plate metadata via the same `api.getArchivePlates()` call the Queue page uses — shared React Query cache keeps it cheap across polls — and renders the actual plate name (or a "Plate N" fallback) only when the source 3MF is multi-plate, so single-plate prints stay noise-free. Falls back to the previous `plate_(\d+).gcode` regex when there's no archive linkage (e.g. prints started directly from the printer LCD). Regression tests cover the plate-id extraction across Bambu Studio path shapes and the label-override precedence in `formatPrintName`. Thanks to @stringham for the follow-up and screenshot.

### Improved
- **Printer Card: Remove Redundant In-Widget "Clear Plate & Start Next" Button** — In expanded view, the "Next in queue" widget rendered its own `Clear Plate & Start Next` button inside a yellow-bordered card (`PrinterQueueWidget.tsx`) whenever the plate-clear gate was up and an auto-dispatch item was queued — on top of the card-level "Mark plate as cleared" button introduced by #939. Both POSTed to the exact same `/printers/{id}/clear-plate` endpoint with identical optimistic-update semantics, so in that one state combination users saw two visually distinct affordances doing the same thing. Removed the widget's button and its entire `needsClearPlate` render branch; the card-level button (which is unconditional when plate-clear is required, and therefore already handles the staged-only and empty-queue cases that the widget couldn't) is now the single entry point. The widget becomes a pure passive "Next in queue" preview linking to `/queue`. No backend change, no change to the plate-status pill placement inside the Status box (deliberately kept where it is), and no change to compact-view (Size S) behaviour — the `plateStatusPill` at `PrintersPage.tsx:2664/2671` and the icon-only round clear-plate button at `:2673` are untouched. Also dropped the now-dead `awaitingPlateClear` / `requirePlateClear` / `printerState` props from `PrinterQueueWidgetProps` and the matching call site at `PrintersPage.tsx:2810`, and the orphaned `queue.clearPlate` / `queue.plateReady` translations from all eight locale files (`queue.clearPlateSuccess` is retained — still used by the card-level button's success toast). The dedicated `PrinterQueueWidgetClearPlate.test.tsx` suite (654 lines) was removed since every test asserted the behaviour of the now-gone button; `PrinterQueueWidget.test.tsx` continues to cover the passive-link path. Thanks to @EdwardChamberlain for flagging the duplication in #1079.

### Fixed
- **Print Scheduler Reprints the Just-Finished Job When Queue Has One Item Left (H2D)** ([#1078](https://github.com/maziggy/bambuddy/issues/1078)) — On H2D, clearing the plate and starting the next (and only) queued item caused the printer to re-run the job it had just finished while the UI reported the queued one as started. With multiple items left the symptom was hidden by forward progress. Root cause: `_watchdog_print_start` in `print_scheduler.py` gives up at 45 s and reverts the queue item to `pending` if `gcode_state` hasn't flipped away from `pre_state`, on the assumption that a non-transitioning printer means the MQTT `project_file` publish was swallowed by a half-broken session (#887/#967). H2D Pro firmware (01.01.00.00) routinely keeps `gcode_state=FINISH` for 48–55 s after actually accepting the command before transitioning to `PREPARE` — logs from the reporter show the revert firing at +45 s and a legitimate `PRINT START detected` arriving just ~3 s later — so the watchdog reverted an item that the printer *had* already started physically printing. The physical print ran to completion and updated the linked archive (via `register_expected_print`), but the queue item was now `pending` again; on the next scheduler tick after the user cleared the plate, the same item was re-dispatched as if it had never run. With multiple items queued, item N+1 getting dispatched during the 45 s race window looked like forward progress to the user and masked the duplicate revert/re-dispatch of item N. Fixed in `_watchdog_print_start` by adding a second "command landed" signal: `subtask_id` changing past the pre-dispatch value. Bambuddy already mints a unique `submission_id` per `project_file` publish (capped at int32 post-#1042) and assigns it to `subtask_id` / `task_id` in the command payload; the printer echoes this back on the next `push_status` as soon as it starts processing — well before `gcode_state` transitions on slow-transition models. `_start_print` now captures `pre_subtask_id` alongside `pre_state` and passes both to the watchdog, which treats *either* a state change *or* a `subtask_id` advance as proof the command landed. Timeout raised 45 s → 90 s as belt-and-braces for printers that neither transition state nor echo `subtask_id` inside the polling window. None of the earlier exit paths are weakened — genuine half-broken sessions (state *and* `subtask_id` both unchanged across the full window) still revert, still force the MQTT reconnect, and are still recoverable without a power cycle. Added eight regression tests in `test_scheduler_watchdog.py` covering: pickup via state change, pickup via `subtask_id` change while state stays at `FINISH` (the exact #1078 case), revert when neither signal changes, default timeout of 90 s, `pre_subtask_id=None` fallback to state-only, `status.subtask_id=None` not mis-detected as a change, printer disconnect mid-watchdog (no DB write), and the `#967` race where the item already moved on (`completed`). No frontend or MQTT changes — purely tightens the "did the printer accept?" decision. Thanks to @VREmma for the clear reproduction and the full support bundle that made pinpointing the H2D state-lag behaviour possible.
- **Printers-Page "Clear Plate" Button Takes 30–300+ s to Appear After Print Completes** ([#939](https://github.com/maziggy/bambuddy/pull/939) follow-up) — A trusted user reported that on every printer (A1, H2D, X1C), the "Clear Plate & Start Next" button didn't show for 60+ seconds after a print finished; refreshing didn't help; one H2D sat in the "Finished" state for 5 minutes without the button ever appearing. Root cause: PR #939 added the `awaiting_plate_clear` gate but stored it on `PrinterManager._awaiting_plate_clear` (a per-process set, persisted to `printers.awaiting_plate_clear` via #961), not on `PrinterState` — and `printer_state_to_dict()` in `printer_manager.py`, which builds every WebSocket `printer_status` payload, was never updated to emit it. Only the HTTP endpoint `GET /printers/{id}/status` (line 634) surfaced the flag. That left the frontend in a deadlock: when `print_complete` arrived over the WebSocket, `useWebSocket.ts` intentionally *didn't* invalidate `['printerStatus']` (avoiding the render-cascade freeze the comment at line 235 warns about), expecting the subsequent `printer_status` WS messages to "naturally update the status" — but those messages carried no `awaiting_plate_clear` field, so the merge at line 146 preserved the stale `false`. The only path that ever surfaced `true` was the 30 s HTTP fallback poll at `PrintersPage.tsx:1430`, and on a chatty printer each incoming WS tick's `setQueryData` bumped React Query's `dataUpdatedAt`, pushing the next fetch further out — which is why the delay varied from ~30 s to several minutes. The plate-status pill at `PrintersPage.tsx:1672-1675` rendered "Plate Clear" (the fallback label for falsy `awaiting_plate_clear`) during the entire stale window, compounding the confusion. Fixed by emitting `awaiting_plate_clear` from `printer_state_to_dict`: the function already has `printer_id`, so it reads `printer_manager.is_awaiting_plate_clear(printer_id)` directly and returns `False` when no id is passed (for the few callsites that don't have one). No frontend change needed — the existing WS merge path now carries the flag end-to-end, the "Clear Plate" button appears instantly on completion, and the queue-dispatch side of the gate (which already reads the in-memory set directly via `print_scheduler.py:1125`) is unaffected. Regression tests in `test_printer_manager.py` assert the WS dict always contains the key and that it surfaces `True` when the manager has the flag set for that printer_id. Affects every printer equally because the path is transport-agnostic — not an H2D- or A1-specific problem, just more visible on H2D because its longer finish sequence gave the poll slip more opportunities to miss.
- **Printers-Page Search Turns Into a Password Field After Opening Change-Password Modal** — On the Printers page, clicking the key icon in the sidebar to open the Change Password modal caused the "Search printers" input to render as a password field (masked dots); closing the modal didn't restore it, requiring a full reload. Root cause: the Change Password modal has three `<input type="password">` fields but no accompanying username input, so password-manager browser extensions (1Password, Bitwarden, Chrome/Safari built-in) scanned the current DOM for a matching username anchor and latched onto the nearest `type="text"` input with no `name`/`autoComplete` — which happened to be the Printers-page search bar — and overrode its rendering. Fixed on two levels: (1) added a hidden `<input type="text" name="username" autoComplete="username" value={user.username} readOnly hidden>` at the top of the Change Password modal so password managers have a proper anchor and stop hunting elsewhere — as a bonus, saved new passwords are now correctly keyed to the logged-in user; (2) hardened the Printers-page search input with `type="search"`, `name="printer-search"`, `autoComplete="off"`, and `data-1p-ignore` / `data-lpignore="true"` so any future heuristic-based autofill also skips it.
- **AMS Slot Configure: Custom Cloud Preset Resolves to "Generic" in Slicer & Printer LCD** ([#1053](https://github.com/maziggy/bambuddy/issues/1053) follow-up) — After configuring any AMS slot (HT or regular) with a user custom Bambu Cloud preset built on top of a Bambu base profile (e.g. "Sting3D ABS" inheriting from "Generic ABS @BBL H2D"), OrcaSlicer's *Sync Filaments* continued to resolve the slot to "Generic ABS" and the custom preset never appeared on the printer's own LCD — independent of the earlier UI fix (commit `87a5aa36`) which only corrected Bambuddy's own modal. Root cause: when Bambu Cloud's `GET /cloud/settings/{setting_id}` returns a user preset with `filament_id: null` and `base_id: "GFSB99_07"` (cloud doesn't mint a distinct filament_id for presets that only override fields of a generic base), `ConfigureAmsSlotModal.tsx:382-384` fell back to `convertToTrayInfoIdx(base_id)` which strips the version suffix and the `S` prefix → `"GFB99"` — Generic ABS's filament_id. The printer accepted and reported back `GFB99`, so both the LCD and OrcaSlicer correctly resolved the slot to Generic ABS. The fallback was never right: the preceding default already set `tray_info_idx = convertToTrayInfoIdx(selectedPresetId)` which for any `PFUS*`/`PFSP*` setting_id returns the base setting_id itself (via the helper's `startsWith('PFUS')` branch added earlier), and the printer + both slicers round-trip that format unchanged — confirmed by existing backend integration tests (`test_configure_pfus_sent_directly`, `test_pfus_slicer_filament_used_directly`), by the print scheduler's slot-matching which already expects `P*` short-form IDs in the printer's reported `tray_info_idx` (`print_scheduler.py:910`), and by the inventory Assign Spool flow which has been sending `PFUS*` preset IDs to the printer for months. The buggy fallback *overwrote* the correct default with a generic mapping. Fixed by removing the base_id branch: when cloud detail carries a distinct `filament_id` we still prefer it, otherwise we keep the setting_id-derived default. BambuStudio Sync now resolves the custom preset cleanly; OrcaSlicer (whose user presets don't carry a `filament_id` field at all, only `inherits`) will continue to fall back to the inherited generic — that's an OrcaSlicer preset-format limitation, not something Bambuddy can fix on its side, and the behaviour is strictly not worse than before. Regression tests in `ConfigureAmsSlotModal.test.tsx` pin four paths: (1) cloud detail with `filament_id: null` → `tray_info_idx` is the `PFUS*` setting_id, (2) cloud detail with a concrete `filament_id` → that filament_id wins over the default, (3) GFS* Bambu presets skip the cloud-detail fetch entirely and still map to the short `GF*` filament_id, and (4) a 5xx / network error on the cloud-detail fetch degrades gracefully to the `PFUS*` default instead of aborting the configure flow. An end-to-end backend test (`test_configure_pfus_preserves_setting_id_pair`) locks in that both `tray_info_idx=PFUS…` and `setting_id=PFUS…` survive the HT-slot `POST /slots/{ams}/{tray}/configure` path untouched. Thanks to @mrnoisytiger for the detailed browser-console / network / backend-log diagnostic data that isolated the fallback path, and for sharing the OrcaSlicer preset JSON that showed the missing `filament_id` field.
- **Single Malformed `rgba` Bricks the Entire Filaments Inventory Page** ([#1055](https://github.com/maziggy/bambuddy/issues/1055)) — A user's Filaments page went blank and "Add Spool" became a no-op with no visible error. The backend was returning HTTP 500 from `GET /api/v1/inventory/spools` with `fastapi.exceptions.ResponseValidationError: rgba → 'FFFFFFF' should match pattern '^[0-9A-Fa-f]{8}$'` — a single legacy spool row had a 7-char rgba (missing one trailing `F`) and Pydantic's strict pattern on `SpoolResponse` refused to serialize the whole list because of it. Root cause spans three layers: (1) `SpoolUpdate` had no rgba pattern constraint, so PATCH calls could plant malformed values straight into the DB (`SpoolCreate` did validate, but only on initial create); (2) the `ColorSection` hex input's onChange ternary `val.length <= 6 ? 'FF' : ''` silently emitted 7-char strings for 5-char or 7-char typed input (5 chars + `FF` alpha = 7 chars; 7 chars got no alpha appended at all), which then flowed to the unvalidated PATCH endpoint; (3) `SpoolResponse` inherited the same pattern as `SpoolCreate`, so any malformed row already in the DB exploded the entire list endpoint on serialize even though write-side validation was the right place for the check. Fixed on all three layers: `SpoolUpdate.rgba` now carries the same `^[0-9A-Fa-f]{8}$` pattern as `SpoolCreate`, so PATCH requests with malformed rgba are rejected with 422 at the boundary. The hex input always emits a fully-formed 8-char RRGGBBAA on every keystroke — 8-char paste passes through, 7-char drops the stray char, shorter input is right-padded with `'0'` and given FF alpha. `SpoolResponse.rgba` is now an unconstrained `Optional[str]`: the pattern belongs on request schemas where Pydantic can reject bad input, not on responses where it turns a single bad row into a total page failure. A legacy malformed row still appears in the UI (the color just renders as whatever browser default applies) but the user can see, edit, and delete it instead of having to hand-edit SQLite. Backend tests cover all three schema contracts (16 cases across `SpoolCreate` accept/reject, `SpoolUpdate` accept/reject, `SpoolResponse` lenient-tolerance on 7-char / null / garbage). Frontend tests cover the hex-input normalization for every input length 0–8 plus non-hex strip-and-pad. Thanks to @fdsghy4a for the end-to-end debugging and for locating the exact malformed row in their DB.
- **Printer-Card "Print" Button Leaves Transient Copy in File Manager** ([#730](https://github.com/maziggy/bambuddy/issues/730)) — The "Print" button on a printer card (and the equivalent drag-drop-onto-card flow) was silently uploading the chosen file into the Library file manager as a side effect before printing. Root cause is structural: the frontend opened `FileUploadModal` to persist the file as a `LibraryFile`, then `PrintModal` dispatched a library print through `POST /library/files/{id}/print`, which uses the LibraryFile as the source for both the archive copy and the FTP upload to the printer. When the dispatch finished, both the `LibraryFile` row and its disk file in `data/library/` were left behind, so every one-off Direct-Print accumulated an unwanted File Manager entry that the user had to find and delete manually. The other three print entry points are untouched: Archive "Reprint" never involved the library, and File Manager "Print" / Project Detail "Print" are paths where the user deliberately put the file in the library, so their entries are preserved. `POST /library/files/{id}/print` now accepts an optional `cleanup_library_after_dispatch` boolean. When true, `_run_print_library_file` stages the LibraryFile row for deletion in the same transaction as the archive insert (so a mid-flight FTP or `start_print` failure rolls back both at once, leaving no orphan), commits together, then unlinks the library disk file and thumbnail from disk after commit succeeds. External library files (`is_external = True`, pointing at user-managed folders outside Bambuddy's control) are never touched regardless of the flag. The Printers-page Direct-Print flow is the only caller that sends `true`; every other `api.printLibraryFile` call site leaves the flag unset so default-False preserves their library entries. Added two unit tests at the enqueue level (default-false + flag-propagates-true), two integration tests at the endpoint level (default-false + forwards-true + cleanup flag never leaks into the MQTT options dict), and two frontend tests on `PrintModal` guarding that `cleanupLibraryAfterDispatch` only forwards when explicitly set — so future File Manager / Project Detail entry points can't accidentally inherit the Direct-Print semantics. Thanks to @3823u44238 for flagging the surprising side effect.
- **Direct / File Manager / Library Prints Still Unattributed to User** ([#730](https://github.com/maziggy/bambuddy/issues/730)) — The 0.2.3.1 fix (commit `f03d0c4c`) plumbed the authenticated user from `POST /library/files/{id}/print` into the background-dispatch job object, but the dispatcher itself never read it back out: `_run_print_library_file` called `ArchiveService.archive_print()` without the `created_by_id` parameter and never called `printer_manager.set_current_print_user()`. Net effect: direct prints from the printer-card "Print" button, File Manager prints, and Library prints all continued to land archives with `created_by_id = NULL` (invisible to the per-user stats filter), and the post-print email notification had no user to target. The dispatcher now forwards `job.requested_by_user_id` to the archive at creation time and registers the current-print user after `start_print` succeeds — matching the reprint path's behaviour. Reprint-from-Archive attribution is a separate bug (the reprint reuses the source archive row as-is, so a NULL `created_by_id` stays NULL) and is tracked on #730. Thanks to @3823u44238 for the thorough end-to-end retest.
- **Spoolman Iframe Blocked by CSP on HTTP Instances** ([#1054](https://github.com/maziggy/bambuddy/issues/1054)) — The Filament tab showed a blank page with a brief Spoolman flash on reload. Browser console reported `Content-Security-Policy: The page's settings blocked the loading of a resource (frame-src) at http://<host>:7912/spool because it violates the following directive: "frame-src 'self' https:"`. Root cause: commit `53a70e37` (#995) tightened the CSP to allow external sidebar iframes but only whitelisted `https:`, overlooking that self-hosted services on LANs — Spoolman, OctoPrint, etc. — almost always run over plain HTTP. The `frame-src` directive now allows `http:` as well (`frame-src 'self' http: https:`), matching the `connect-src 'self' ws: wss:` pattern already used for WebSockets. `frame-ancestors 'none'` still prevents Bambuddy itself from being framed cross-origin. Thanks to @saint-hh for reporting.
- **AMS-HT: Custom Filament Preset Reverts to "Generic" in UI After Configure** ([#1053](https://github.com/maziggy/bambuddy/issues/1053)) — After configuring an AMS-HT slot (HT-A/HT-B) with a custom Bambu Cloud preset (e.g. "Devil Design PLA Basic"), the slot card and Configure modal kept showing "Generic PLA" even though the `ams_filament_setting` command succeeded and BambuStudio / the printer's LCD both rendered the correct custom preset. Root cause: the `GET /api/v1/printers/{id}/slot-presets` endpoint keyed its response dict by `ams_id * 4 + tray_id`, which collapses cleanly to the same integer the frontend uses for regular AMS slots (0 through 15) but produces `128 * 4 + 0 = 512` for HT-A — a key nothing looks up. The frontend's PrintersPage HT render path calls `getGlobalTrayId(ams.id, …, false)` which returns the ams_id itself (`128` for HT-A), and SpoolBuddy's AMS page used a third, unrelated formula (`(amsId - 128) * 4 + trayId + 64 = 64`). All three agreed for regular AMS so the mismatch only surfaced on HT, where the saved preset name never reached the UI and the render fell through to `tray.tray_type` → rendered as "Generic PLA". Backend now keys the response via a `_slot_preset_key` helper that mirrors frontend `getGlobalTrayId` (HT → `ams_id`, regular/external → `ams_id * 4 + tray_id`), and SpoolBuddyAmsPage uses the shared `getGlobalTrayId` helper instead of its home-grown formula. Regression test covers the key scheme for regular, HT, and external slots. Thanks to @mrnoisytiger for the detailed reproduction.
- **⚠️ Bed-Jog "Home Z" Could Crash the Bed Into the Toolhead** ([#1052](https://github.com/maziggy/bambuddy/issues/1052)) — **Critical safety fix.** On H2C (and by extension any Bambu printer where Z-home moves the bed UP toward an endstop — H2D, H2S, and X1 family all share this kinematics) the bed-jog modal's "Home Z" button sent a raw `G28 Z` over the `gcode_line` MQTT command. Bare `G28 Z` skips the toolhead-park step that a full `G28` runs first, so the bed raised without stopping at a safe height — in the reporter's case the toolhead happened to be parked on the purge chute and no damage was caused, but hitting the button with a toolhead anywhere else would have driven the bed into it at full Z speed. Root cause was the `/api/v1/printers/{id}/home-axes` endpoint's per-axis gcode mapping (`"z" → "G28 Z"`, `"xy" → "G28 X Y"`, `"all" → "G28"`). The endpoint now ignores the `axes` argument entirely and always sends a bare `G28`, which Bambu firmware expands into the safe multi-step sequence (park toolhead → home XY → home Z). The MQTT client helper `BambuClient.home_axes()` has the same change. The bed-jog modal is retitled "Auto Home" and its copy now says "parks the toolhead, then homes X, Y, and Z" so users aren't surprised when X/Y motion happens first. After a successful Auto Home click, the modal no longer re-prompts on the next jog in the same session — the "not homed" warning is gated on a session-scoped acknowledgement flag that was only being set by "Move anyway" and now also fires on successful Auto Home. Regression test covers all three axes arguments producing the same bare `G28`. Thanks to @mikefromdot for catching this with an undamaged retest.
- **AMS: Configure / Assign Spool Hidden on Reset Slots, and Assign Spool Missing Matching-Material Inventory** ([#1047](https://github.com/maziggy/bambuddy/issues/1047)) — Two separate symptoms from the same report. (1) After resetting an AMS slot from the printer UI, the Bambuddy printer card showed "Empty Slot" with no Configure or Assign Spool actions on hover, while the same slot in SpoolBuddy's AMS page still let the user re-configure it. Root cause: commit `c9efa4b8` (#784) added a `tray?.state === 10` gate to the `EmptySlotHoverCard` actions, intended to show the buttons only when a spool was physically present but not loaded (state=10) and hide them on truly empty slots (state=9). In practice, firmware often reports `state=9` (or no `state` field at all) after a user-initiated reset — even when a spool is still physically in the slot — so the actions disappeared exactly when the user needed them. The gate is redundant anyway (`EmptySlotHoverCard` is only rendered when the slot has no `tray_type`, so it's definitionally empty from Bambuddy's perspective), and configuring an empty slot is a valid "tell the printer what will be loaded here" operation. The gate is now removed at both the standard-AMS and AMS-HT render paths. (2) After configuring a slot with a Generic profile (e.g. "Devil Design PLA Basic Red"), the Assign Spool modal didn't list the matching inventory spool unless the user enabled the "Show all spools" toggle. Root cause: the filter at `AssignSpoolModal.tsx:144` required `normalizeValue(spool.slicer_filament_name) === normalizeValue(trayInfo.profile)` — manually-added inventory spools typically don't have `slicer_filament_name` populated, so they failed the exact-profile check even when the material matched. The filter now prefers an exact slicer-profile match when both sides advertise one, and falls back to partial material match in either direction (so e.g. a spool with `material="PLA"` is selectable for a slot reporting `"PLA Basic"`) when profile info is missing. (3) Once the matching spool was assignable, a "profile mismatch" confirmation dialog still warned on every assignment because Bambu Studio / OrcaSlicer slicer-profile names carry a printer/nozzle/variant qualifier after `@` (e.g. `"Devil Design PLA Basic @Bambu Lab H2D 0.4 nozzle (Custom)"`) while the tray stores only the bare base name (`"Devil Design PLA Basic"`), and `checkProfileMatch` compared the full strings. Both the filter and the mismatch check now strip the `@…` qualifier before comparing, so identical base profiles are treated as a match. Regression test covers a spool with no slicer profile being surfaced for a slot whose profile + material are both set. Thanks to @TravisWilder for the report.
- **Skip Objects: Enlarged Preview Image Fails to Load on Auth-Enabled Instances** ([#1046](https://github.com/maziggy/bambuddy/issues/1046)) — Clicking the mini print-pr

### Added
- **Spoolman Unified Inventory UI** — Replaced the Spoolman iframe with a native inventory UI that matches the local spool experience exactly. The Filament Inventory page auto-detects the active backend (local DB or Spoolman) and renders spools, filters, deep-links, and NFC write flows identically regardless of source. Spoolman spools are fully editable — material, weight, colour, storage location, cost — via a PATCH proxy that re-links the Spoolman filament on metadata changes. Bulk-create, archive, restore, and delete are all supported. A 207 Multi-Status response on partial bulk-create includes `requested_count` and `failed_count` so the UI can surface a useful "Created N of M" message.
- **Storage Location field** — Spoolman's `location` field is now exposed as `storage_location` in the unified inventory schema and editable from the spool detail panel.
- **Deep-link from AMS slot hover card** — Clicking the filament chip on an AMS slot hover card deep-links directly to the matching spool in the inventory, whether it lives in the local DB or Spoolman. The link resolves by spool ID so it survives list reloads; a 404 shows a "Spool not found" toast instead of a generic error.
- **Spoolman-aware NFC write** — The SpoolBuddy Write Tag flow now falls back to Spoolman when a spool is not in the local DB. The NDEF payload is built from the Spoolman filament metadata; incomplete fields (missing `color_name`, `nozzle_temp_min`, etc.) produce per-field warnings surfaced as a UI toast. After a successful NFC write the tag UID is persisted back to Spoolman's `extra.tag` via a safe key-merge that preserves all other custom extra fields.
- **Spoolman-aware scale weight sync** — The SpoolBuddy scale endpoint reads `filament.spool_weight` from Spoolman to compute the tare, falling back to 250 g when unset. Weight is written back to Spoolman's `remaining_weight`.

### Fixed
- **Tag-clear preserves other Spoolman extra keys** — Clearing a tag UID from the inventory PATCH endpoint previously sent `extra: {}`, destroying any custom Spoolman extra fields. The endpoint now fetches the current extra dict, drops only the `tag` key, and PATCHes the remainder.
- **Malformed Spoolman spool no longer 500s the entire inventory list** — A spool with a missing or non-positive `id` field caused `_map_spoolman_spool` to raise `ValueError`, crashing `GET /spoolman/inventory/spools` with HTTP 500. The list endpoint now logs-and-skips individual bad rows so the rest of the list is returned normally.
- **delete / archive / restore correctly return 404 on missing spool** — Previously these endpoints returned HTTP 500 when Spoolman responded with 404. The service layer now raises `SpoolmanNotFoundError` on 404 and `SpoolmanUnavailableError` on other failures; routes map them to 404 and 503 respectively.
- **SSRF guard applied to all SpoolBuddy Spoolman paths** — `_get_spoolman_client_or_none` now runs `assert_safe_spoolman_url` before initialising the client; unsafe URLs are silently ignored with a warning log so devices continue operating.

## [0.2.3.1] - 2026-04-20

### Fixed
- **Skip Objects: Enlarged Preview Image Fails to Load on Auth-Enabled Instances** ([#1046](https://github.com/maziggy/bambuddy/issues/1046)) — Clicking the mini print-preview thumbnail inside the Skip Objects modal opened a lightbox that showed a broken-image icon instead of the full-size plate preview. The thumbnail `<img>` wrapped its `src` with `withStreamToken()` (which appends the short-lived camera-stream token to `/api/v1/` URLs that `<img>` tags can't attach an `Authorization` header to), but the enlarged lightbox `<img>` used a bare `${status.cover_url}?view=top` so the browser's unauthenticated request was rejected by the backend. Both images now go through `withStreamToken()`. Thanks to @elit3ge for the report and screenshot.
- **P1S Print Dispatches Stuck at IDLE Due to task_id Int32 Overflow** ([#1042](https://github.com/maziggy/bambuddy/issues/1042)) — Since the #1011 fix switched `project_id` / `subtask_id` / `task_id` from hardcoded `"0"` to `str(int(time.time() * 1000))`, each submission sent a 13-digit epoch-millisecond value (~1.7×10¹²). P1S firmware (observed on 01.10.00.00) clamps oversized task identity fields to signed int32 max (`2147483647`), so every dispatch looked identical from the printer's perspective — it treated a fresh print as a continuation of the prior FAILED job, returned `result: success` for `project_file` (command accepted), but then sat at `gcode_state: IDLE` with an empty `gcode_file` instead of transitioning to `PREPARE`/`RUNNING`. Thanks to @EdwardChamberlain for pinpointing the exact line and suggesting the mod fix. The three identity fields are now set to `str(int(time.time() * 1000) % 2_147_483_647 or 1)`: modulo keeps values inside the signed-int31 window with a ~24-day uniqueness cycle (more than enough for reprint deduplication), and `or 1` guards against the astronomically unlikely zero case (the printer rejects `task_id=0`). Regression test `test_submission_id_fits_signed_int32` asserts all three IDs are `< 2**31`. Two of @EdwardChamberlain's other suggestions — resolving `bed_type` from the sliced 3MF's per-plate JSON instead of hardcoding `"auto"`, and gating dispatch success on an actual state transition to `PREPARE`/`RUNNING` rather than on `project_file`'s `result: success` — are larger changes tracked separately.
- **FTP Download Zombie-Thread Race on Slow WiFi** ([#1014](https://github.com/maziggy/bambuddy/issues/1014)) — Users on 2.4 GHz WiFi with heavy neighborhood interference saw "Successfully downloaded" log lines for queued prints that Bambuddy nonetheless reported as failed, and the slicer file landed in `/app/data/archives/temp/` with the File Manager unable to find it. Root cause: `download_file_async` wrapped the blocking FTP `RETR` in `asyncio.wait_for` with a 30–60 s timeout (user-configurable via `ftp_timeout`), but the wrapped thread couldn't be cancelled. On a slow link the download would overshoot the timeout by 15–30 s, at which point `_run()` waited a hard-coded 0.5 s for the zombie to finish, gave up, and returned failure — which triggered `with_ftp_retry` attempt 2, whose `_download` spawned a brand-new FTP session that contended with attempt 1's still-running transfer. Attempt 1's zombie eventually completed and wrote the file to disk, but by then attempt 2 (and 3, 4) had long since run out their own timeouts with their own fresh `completion` dicts and reported failure; the archive pipeline saw only the final `None` from `with_ftp_retry` and created a fallback archive row with no 3MF data, which is why Skip-Object couldn't find the plate's objects even though the 3MF was on disk. Two fixes: the 0.5 s post-timeout sleep is replaced with a `threading.Event` the worker sets in its `finally` block, and `_run()` waits for that event with a bounded grace of `max(min(ftp_timeout, 30), 0.5)` s — covering the slow-WiFi overshoot case without extending a genuinely stuck connection indefinitely. The log line now includes the grace window (`timed out after Xs (plus Ys grace)`). Regression test `test_download_file_async_timeout_waits_for_slow_zombie` simulates a 1.5 s zombie with a 1.0 s wait_for timeout; old 0.5 s sleep would give up, new 1.0 s grace salvages. The existing `test_download_file_async_timeout_no_salvage_when_incomplete` still passes — a thread that never completes within the grace window still returns failure. Thanks to @heffe2001 for the detailed reproduction and support logs.
- **Obico: Cold-Start Capture Timeout Sticks in Status Banner** ([#172](https://github.com/maziggy/bambuddy/issues/172)) — On the very first detection poll after a restart, the initial RTSP snapshot capture occasionally exceeded the 20 s `SNAPSHOT_CAPTURE_TIMEOUT` (the first keyframe from the printer's camera can take a while on a cold RTSP connection). Subsequent polls every ~8 s recovered and captured in ~1.2 s, but the red `× Failed to capture snapshot for printer N` banner in Settings → Failure Detection → Status stayed up forever because `ObicoDetectionService._last_error` was written on failure and never cleared on the next successful poll. The successful branch in `_check_printer` now clears `_last_error` to `None` once a capture + ML call + classification complete, so the banner reflects only errors from recent cycles. Configuration-level errors (missing `external_url`, missing `ml_url`) still persist because they return before the clearing line — users still see them until they fix the setting. Regression test covers: seed `_last_error`, run one successful `_check_printer`, assert `_last_error is None`. Thanks to @fblix for the reproduction and screenshot.
- **Printer Card Controls Row Overflows in Chrome** — At Medium card size on a wide viewport, the printer-card controls row (fan badges, airduct mode, print speed, bed jog, then Stop / Pause on the right) visibly overlapped in Chrome while rendering fine in Firefox and Safari. The controls-row layout had a `max-[550px]:flex-wrap` rule on the left badge group that only fires below 550 **viewport** pixels, so on a wide viewport with a narrow card the left group never wrapped — and since its badges don't truncate, Chrome painted the overflowing speed/bed-jog badges on top of the right-pinned Stop/Pause buttons. German locales made it obvious ("Pausieren" is 9 characters). The left group now uses unconditional `flex-wrap`, so when badges don't all fit on one line they wrap inside the left cell instead of colliding with the right cell; the parent row also wraps `gap-y` so Stop/Pause drops to a new line in the worst case. Pre-existing (commit `4ff3e2a6`, Feb 2026), surfaced while testing #939.
- **MQTT Smart Plug Subscription Lost After Every Restart** ([#1010](https://github.com/maziggy/bambuddy/issues/1010)) — Users integrating a Shelly (or any other) plug through an external MQTT broker (e.g. ioBroker, Zigbee2MQTT, Home Assistant's MQTT broker) saw the plug's power / state / energy readings go dark after every Bambuddy restart, and the only fix was to open Settings → Smart Plugs, rename the topic to a dummy value, save, rename it back and save again. Root cause: the startup restore path in `main.py` (~line 4120) still used the legacy single-topic model (`mqtt_topic` plus `*_path` kwargs), while the Settings UI save path had been upgraded to the newer per-type model (`mqtt_power_topic` / `mqtt_energy_topic` / `mqtt_state_topic` each with their own paths, multipliers and `mqtt_state_on_value`). Plugs configured entirely with the new per-type fields got skipped at startup because the `if plug.mqtt_topic:` guard short-circuited — which is exactly what a Shelly-via-ioBroker setup looks like, since those publish power and state on separate topics. The "rename, save, rename back" workaround triggered the update endpoint, which was using the correct per-type code and re-established the subscription. Fix: extracted the topic-resolution + `service.subscribe()` call into a single `subscribe_plug_to_mqtt(service, plug)` helper in `backend/app/services/mqtt_smart_plug.py` that preserves legacy fallback, and routed the startup restore, create, and update routes all through it so future schema changes can't cause the three paths to drift again. Regression tests cover: per-type topics restored without a legacy topic set, legacy single-topic backward compat, per-type multipliers overriding legacy, per-type winning when both are set, the empty-config skip case, and topic-list de-duplication. Thanks to @saint-hh for the clear repro steps.
- **Large 3MF Uploads Archived as Corrupted ZIPs** ([#1032](https://github.com/maziggy/bambuddy/issues/1032)) — On bare-metal Raspberry Pi installs (armv7l / Python 3.11 / Bookworm), 3MF files larger than a few MB arrived complete via the virtual-printer FTP server but the copy into `data/archives/` ended up not being a valid ZIP. The archive row was still written, the printer card looked fine, and the problem only surfaced later when opening the archive in the UI, where `GET /archives/{id}/plates` logged `Failed to parse plates from archive N: File is not a zip file` and the thumbnail / plate / filament panels came up blank. Two things conspired: `shutil.copy2` takes the Linux `sendfile()` fast path on Python ≥ 3.8, and a partial-return from that syscall silently truncated the destination for the upload sizes users hit; and `ThreeMFParser.parse()` had a bare `except: pass` around its `zipfile.ZipFile` open, so the archive pipeline kept going with empty metadata and left the bad file on disk. The copy is now an explicit chunked read/write with `fsync()` — no sendfile involved — with a post-condition `zipfile.is_zipfile()` check that refuses to create the archive row (and cleans up the archive directory) when the source was a valid ZIP and the destination isn't, logging both sizes at `ERROR`. The parser's silent catch now logs at `WARNING` so corrupted 3MFs are visible in support bundles instead of disappearing into empty metadata. Regression tests cover small / multi-chunk copies, ZIP roundtrips, the post-copy `is_zipfile` sentinel on a truncated file, and the new parser WARNING. Thanks to @saint-hh for the detailed diagnosis.
- **Thumbnails Blank Until Reload After Sign-In** — On auth-enabled instances, signing out and back in left the File Manager (and occasionally the Archives page) full of broken thumbnails until the page was manually reloaded. Thumbnail URLs are gated by a short-lived camera-stream token that `<img>` tags can't send via `Authorization` headers, so the token is appended as `?token=…` at render time. Two race conditions conspired to break this: (1) the token query was keyed only on `['camera-stream-token']` and fired while the user was still on the login page, 401'd, and stayed cached — after sign-in nothing invalidated it; (2) when the token did eventually arrive, the global variable holding it was not reactive, so any File Manager / Archives page that had already rendered kept serving image URLs with no token. The token query now includes the user id in its key and is gated on `!!user`, so a new login always triggers a fresh fetch; and when the token transitions from null to a value, `useStreamTokenSync` walks the DOM once and updates `src` on every already-rendered `<img>`/`<video>` pointing at `/api/v1/` without the current token, reloading them in place.
- **P2S Firmware Check Shows Stale "Latest" Version** ([#1030](https://github.com/maziggy/bambuddy/issues/1030)) — On P2S (and X2D) the Firmware Info modal reported `01.01.01.00` as the newest available release even though `01.02.00.00` had shipped on the Bambu Lab wiki weeks earlier, so the "update available" badge never appeared. Two silent regex mismatches in the wiki scraper caused `_fetch_all_versions_from_wiki()` to return an empty list: (1) the section-heading anchor parser required a dash between the version bytes and the release date (`id="h-01020000-20260409"`), but P2S and X2D publish anchors without the dash (`id="h-0102000020260409"`); (2) the text-based fallback only accepted ASCII parens around the date, while P2S, X2D, A1 and A1-mini headings render dates in full-width `（YYYYMMDD）` (U+FF08/U+FF09). When both paths failed, the code silently fell back to the Bambu Lab download page, which still lagged at `01.01.01.00`. The anchor regex now accepts an optional dash and the fallback accepts both paren styles; added regression tests for the no-dash anchor and full-width paren shapes. Thanks to @Minebuddy for reporting.
- **Library File Print-Usage Tracking** ([#1008](https://github.com/maziggy/bambuddy/issues/1008)) — `LibraryFile.print_count` and `last_printed_at` are now updated on every successful queued print completion. Previously both fields were defined on the model and displayed in the File Manager, but nothing ever wrote to them — every file in every library showed as never printed. Now counts increment cumulatively and `last_printed_at` stamps the completion timestamp (UTC). Failed, cancelled and user-aborted prints are intentionally excluded, so the fields represent "successful usage" rather than "attempted usage." This unblocks sorting the File Manager by last-printed date and is a prerequisite for the scheduled-purge feature requested in #1008. Thanks to @cadtoolbox for the report.

### Improved
- **Color Catalog Default Filter Set to "All Manufacturers"** ([#1039](https://github.com/maziggy/bambuddy/issues/1039)) — Settings → Color Catalog opened with the manufacturer dropdown pre-filtered to *Bambu Lab*, so users searching for a third-party color had to change the dropdown to *All Manufacturers* on every visit. The page now defaults to *All Manufacturers* and lets you narrow down from there. Thanks to @VID-PRO for the suggestion.
- **File Manager: Collapse Folders by Default** ([#996](https://github.com/maziggy/bambuddy/issues/996)) — Added a **Collapse** toggle next to **Wrap** in the File Manager sidebar header. When enabled, the folder tree opens with only top-level folders visible on every page load; disabling it restores the previous fully-expanded default. Toggling the preference also immediately re-collapses/re-expands the current tree — no reload required. Persisted to localStorage under `library-collapse-folders`, matching the existing `library-*` preference pattern. Thanks to @AshieTashi for the request.

### Changed
- **Docker runtime image on Debian Trixie** — The production Docker image now builds on `python:3.13-slim-trixie` instead of the Bookworm-based `python:3.13-slim`. Picks up ffmpeg 5 → 7 (HEVC/AV1 improvements for camera capture), OpenSSL 3.0 → 3.3, and two more years of APT package freshness. Frontend-builder stays on Bookworm until the Node.js image team publishes Trixie variants — users never see that stage.

## [0.2.3] - 2026-04-19

### New Features
- **Move Build Plate from Printer Card** ([#791](https://github.com/maziggy/bambuddy/issues/791)) — The printer card controls row now has a Z-jog badge between the speed control and the stop/pause buttons. Click the up/down arrows to move the build plate; click the middle label to switch the step size (1 / 10 / 50 mm). When the printer is not homed (typical right after a print finishes), the first jog opens a Bambu Studio-style warning modal with **Home Z**, **Move anyway** (bypasses soft endstops for this move), or **Cancel**. After the first "Move anyway" in a session, subsequent jogs skip the dialog. Disabled while a print is running. Backed by new `POST /printers/{id}/bed-jog` and `POST /printers/{id}/home-axes` endpoints, both gated behind `printers:control`. Thanks to @cadtoolbox for the request.
- **Printer Card Status Badges & Quick Controls** — The Printers page printer card now exposes new at-a-glance controls inspired by the Home Assistant Bambu Lab integration:
  - **Enclosure Door badge** in the top status row (DoorOpen/DoorClosed icons, green when closed, yellow when open). Detection uses the right MQTT field per printer family — `home_flag` bit 23 on X1/X1C/X1E and the top-level `stat` hex string bit 23 on P1/P2/H2 — and falls through the existing WebSocket push (status-change dedup key now includes door state, so toggling the door alone triggers a live badge update without waiting for the 30 s REST poll).
  - **Airduct Mode badge** beside the print speed control (Snowflake/Flame icons, sky for Cooling and orange for Heating). One-click dropdown switches the printer between cooling and heating via the existing `set_airduct` MQTT command. Gated to P2S/H2D/H2C/H2S.
  - **Force Refresh** menu entry in the printer card kebab menu (RotateCw icon) that re-requests a full `pushall` MQTT status report from the printer without forcing a reconnect.
- **AI Print-Failure Detection via self-hosted Obico ML API** ([#172](https://github.com/maziggy/bambuddy/issues/172)) — New Settings → Failure Detection tab wires Bambuddy to a self-hosted [Obico](https://github.com/TheSpaghettiDetective/obico-server) `ml_api` container (no Obico account, no cloud, no WebSocket). While a print is running, the detection service periodically hands the printer's camera snapshot URL to the ML API, which returns YOLO failure-detection scores. Scores are smoothed over time using Obico's own EWM + short/long rolling-mean math (30-frame warmup, alpha = 2/13, short window ≈ 5 min at 10s/frame, long window ≈ 20 h) so a single noisy frame cannot trigger an action. Sensitivity (Low / Medium / High) scales the LOW/HIGH thresholds; when the smoothed score crosses HIGH, the configured action runs exactly once per print: *Notify only*, *Pause print* (MQTT pause command), or *Pause and cut power* (pause + turn off any smart plug linked to that printer). A per-printer toggle lets you monitor all connected printers or just a subset. The Status card shows whether the service is running, the active thresholds, each monitored print's current verdict (safe / warning / failure), and a live rolling detection history. Snapshots are captured locally with a 20 s timeout we control and stashed under a one-shot 32-byte nonce; the ML API fetches them via an unauthenticated `/api/v1/obico/cached-frame/{nonce}` URL that sidesteps Obico's hardcoded 5 s read timeout.

### Improved
- **Firmware Update Modal Shows All Announced Versions** ([#568](https://github.com/maziggy/bambuddy/issues/568)) — The firmware update dialog now lists every version announced on Bambu Lab's wiki release history, not just the single newest one. Each row shows whether an offline firmware file is actually available for that version — rows marked **Usable** (green) can be installed, rows marked **Unavailable** (gray) are announced but have no downloadable package yet (common for hot-fix releases like `01.01.03.00` which Bambu only ships as OTA). The currently installed version is highlighted with a blue **Installed** badge. Selecting any usable row swaps the release-notes block at the top to that version's notes and enables the Install button for it — including older-than-current versions, so you can roll back to a previous firmware without having to hand-flash a file. The wiki scraper was tightened to only extract version numbers from heading anchors (e.g. `id="h-01030000-20260303"`) so incidental version mentions in release-note prose — like an AMS firmware reference in an H2D changelog — no longer get mistaken for H2D firmware releases. Thanks to @Cornelicorn for the request.
- **Spoolbuddy Device Controls in Settings** ([#962](https://github.com/maziggy/bambuddy/issues/962)) — Each Spoolbuddy device card in Settings → Spoolbuddy now exposes five one-click actions alongside the existing Unregister button: Update (trigger daemon software update), Restart Browser (kiosk UI), Restart Daemon, Reboot (device), and Shutdown. Each action shows a confirmation dialog before queueing the command; buttons are disabled when the device is offline. Uses the existing `/spoolbuddy/devices/{id}/update` and `/spoolbuddy/devices/{id}/system/command` endpoints — no new backend work needed. Thanks to @TravisWilder for the request.
- **Support Bundle Covers All Settings & SpoolBuddy** — The support bundle / bug-report payload now dumps every row in the `Settings` table instead of filtering by a hard-coded allowlist: sensitive keys (tokens, passwords, URLs, paths, emails, etc.) have their values replaced with `[REDACTED]` but the key itself is kept, so new config flags automatically show up in future bundles without a code change. Also adds an `integrations.spoolbuddy` section listing registered SpoolBuddy devices (firmware version, NFC/scale hardware, calibration, online state, uptime) — anonymized, no hostnames/IPs/device IDs.
- **Settings Search Finds More Cards** — The cross-tab search field at the top of Settings now finds Sidebar Links, Spoolman, Spool Catalog, Color Catalog, all four Failure Detection sections, Advanced Email Authentication, SMTP Test, Authenticator App (TOTP), Email OTP, 2FA Linked Accounts, Single Sign-On (OIDC), LDAP Server Configuration, and the four Backup sub-cards (GitHub, History, Local, Scheduled). Powered by a new module-level registry (`frontend/src/lib/settingsSearch.ts`) so future settings register themselves next to their component instead of being forgotten in a central array.

### Changed
- **Plate-Clear Confirmation Disabled by Default** — New installs ship with Settings → Workflow → "Require Plate-Clear Confirmation" off. Multiple new users reported queued prints appearing to not start because the prompt was waiting for acknowledgement; opt in from Workflow if you want the confirmation gate.

### Security
- **Dependency Updates for Published Advisories** — Bumped two dependencies flagged by vulnerability scanners. `python-multipart` 0.0.22 → 0.0.26 closes CVE-2026-40347 (GHSA-mj87-hwqh-73pj), a denial-of-service triggered by large preamble or epilogue data around a multipart boundary — the 0.0.26 release now skips the preamble before the first boundary and silently discards the epilogue after the closing one. Bambuddy uses `python-multipart` transitively through FastAPI/Starlette for form and file-upload parsing, so any authenticated endpoint accepting `multipart/form-data` (e.g. backup restore, project thumbnail upload) was exposed. `dompurify` 3.3.3 → 3.4.0 picks up the fix for GHSA-39q2-94rc-95cp (the function-form `ADD_TAGS` could bypass `FORBID_TAGS`); Bambuddy's two call sites (`ProjectDetailPage`, `ProjectPageModal`) only use array-form `ALLOWED_TAGS`/`ALLOWED_ATTR`, so the specific bypass was not reachable, but the bump still hardens the sanitizer against future misconfiguration and clears the audit warning.

### Fixed
- **Virtual Printer "Synchronizing device information" Timeout with OrcaSlicer on Linux** ([#927](https://github.com/maziggy/bambuddy/issues/927)) — Follow-up to the b069b521 serial-adaptation fix. OrcaSlicer's Linux builds publish MQTT payloads with the C-string null terminator included in the length (same pattern as [paho.mqtt.c #1198](https://github.com/eclipse-paho/paho.mqtt.c/issues/1198)), so every decoded message arrived as `{…}\x00`. The virtual printer's strict `json.loads()` raised `JSONDecodeError: Extra data` and the handler silently returned — no pushall, get_version, or project_file was ever answered, so the slicer hit its 60 s sync timeout and reconnected in a loop. Real Bambu firmware's mosquitto passed the trailing byte through, which is why direct LAN connections worked, and why print_queue mode was the only affected path (proxy mode tunnels MQTT to the real printer instead of running the VP broker). The handler now strips trailing `\x00`/whitespace before parsing and logs the raw payload on any remaining decode failure so future silent variants are visible in support bundles. Thanks to @EdwardChamberlain for the debug-enabled support log that made the null byte visible in the raw bytes.
- **SpoolBuddy Kiosk Unusable After Full-Mode Install** — A bundled Bambuddy + SpoolBuddy install via `spoolbuddy/install/install.sh --mode full` produced an unusable kiosk on first boot: Chromium raced ahead of uvicorn and showed "can't connect to localhost"; after a manual reload the kiosk URL `/spoolbuddy?token=…` was hijacked by Bambuddy's first-run wizard (`AuthContext` force-redirects to `/setup` whenever `requires_setup=true`, regardless of the target path); the wizard asks for admin credentials, but a touch-only Pi has no on-screen keyboard; if the user skipped auth the browser landed at `/` instead of the kiosk, and if they tried to enable auth they were stranded. Standalone mode was unaffected because it runs against an already-configured remote Bambuddy. Fixed in three parts: (a) new `backend/app/cli.py` with a `kiosk-bootstrap` subcommand that in a single DB transaction creates a scoped API key (`can_read_status=True`, `can_queue=False`, `can_control_printer=False`) and upserts `setup_completed=true`, so the first-run wizard never triggers and the kiosk URL loads the SpoolBuddy page directly; users can still enable authentication later from the admin UI and the pre-provisioned key keeps working. (b) `install.sh` full-mode now runs the CLI as the bambuddy service user immediately after `create_bambuddy_service` and `sed`-replaces the `CHANGE_ME_AFTER_SETUP` placeholder in `spoolbuddy/.env`. (c) The generated `spoolbuddy-kiosk-launch` now polls `${backend_url}/health` with a 60 s timeout before exec'ing Chromium, so cold boots wait for uvicorn instead of flashing the connection-refused error. The CLI is idempotent with `--force` for re-installs.
- **Bambu Lab X2D Support** ([#988](https://github.com/maziggy/bambuddy/issues/988)) — Added X2D to the Add Printer and Edit Printer model dropdowns (both were missing the new model, so manual printer setup had no X2D option — auto-discovery via SSDP was unaffected). The newly released X2D (dual-nozzle, enclosed, hardened steel rod gantry, AMS 2 Pro compatible) identifies itself as internal model code `N6` via SSDP/MQTT, and serials begin with `20P9`. Because neither the code nor the prefix existed in any of Bambuddy's model tables, multiple paths silently fell back to wrong defaults: the camera service routed to the chamber-image protocol on port 6000 (which the X2D doesn't speak) instead of RTSP on port 322 — the reporter saw `Chamber image: data is not a valid JPEG` spam and no stream; the K-profile edit/delete path conditioned its in-place `cali_idx` write on the H2D serial prefix `094` and would therefore have treated X2D as a single-nozzle printer even though its dual-extruder layout matches H2D; the firmware-update check logged `Unknown printer model: N6`; and the virtual-printer model registry had no way to emulate X2D. Added the `N6 → X2D` mapping across every registry (`PRINTER_MODEL_ID_MAP`, `PRINTER_MODEL_MAP`, `ETHERNET_MODELS`, `STEEL_ROD_MODELS`, `CHAMBER_TEMP_SUPPORTED_MODELS`, firmware-check API keys and wiki path, virtual-printer SSDP product names and serial prefix, DB migration `vp_model_fixes`), extended `supports_rtsp()` to match `X2` display names and the `N6` internal code (camera now goes to port 322), expanded the dual-nozzle serial prefix check in `kprofiles.py` and the K-profile delete command in `bambu_mqtt.py` to also accept `20P9` so the H2D-style `cali_idx` in-place edit path runs on X2D, added X2D to the `is_h2d` model-family gate that selects the integer-format `timelapse`/`bed_leveling`/`flow_cali`/`vibration_cali`/`layer_inspect` fields in the MQTT print command, and added X2D to the frontend's door-badge and airduct-mode whitelists, `mapModelCode` lookups on both the Printers page and Spoolbuddy AMS page, and the MaintenancePage wiki-URL resolver (X2D inherits P2S's steel-rod lubrication, belt-tension, nozzle cold-pull and PTFE wiki pages, since its hardware is closer to P2S than to H2). Credit to @krautech for the report and the debug bundle, and to @legend813 for the initial PR (#989) that seeded most of the registry changes — the classification was corrected (X2D uses hardened steel rods like P2S, not carbon rods) and the dual-nozzle/K-profile gaps were added on top.
- **Print Speed Icon Not Updating Live When Changed on Printer** ([#993](https://github.com/maziggy/bambuddy/issues/993)) — Changing the print speed mode from the printer's own panel (instead of from Bambuddy) did not update the speed icon on the Printers page card; the new value only appeared after a full page reload. The MQTT parser was already tracking `spd_lvl` and updating `state.speed_level` correctly, but the WebSocket serializer (`printer_state_to_dict`) was missing the field — so live status pushes never carried `speed_level`, and the frontend's merge-over-old-cache update left the icon stuck on its previous value. The REST `/status` endpoint used on initial page load already included it, which is why reloads worked. Added `speed_level` to the WebSocket payload. Thanks to @chesterakl for reporting.
- **Camera Popup Shows "Valid camera stream token required" With Auth Enabled** ([#979](https://github.com/maziggy/bambuddy/issues/979)) — When Camera View Mode was set to "Window" and authentication was enabled, clicking the camera button opened a popup that immediately failed with `"Valid camera stream token required"`, while the embedded overlay kept working. Two root causes: (1) `window.open(...)` passed `noopener` in the popup features, which severed the opener link and prevented the browser from copying sessionStorage (where the auth token lives) into the popup — so the new window booted unauthenticated and the `POST /printers/camera/stream-token` fetch returned 401, leaving the `<img>` src without the required `?token=` query param; (2) even once the token arrived, `CameraPage` computed its URL from the module-level stream-token cache on render and never re-rendered when the cache was updated in a `useEffect`, so the first paint locked in a tokenless URL that the backend kept rejecting. Fixed by dropping `noopener` from the camera popup features (same-origin, trusted window) so sessionStorage is inherited, subscribing `CameraPage` to the `camera-stream-token` React Query so it re-renders the moment the token resolves, and appending the token directly from the reactive query value instead of the effect-synced module cache — the `<img>` src stays empty until the token is ready, so no tokenless request ever leaves the popup. Embedded-overlay mode was unaffected. Thanks to @VREmma for the reproducer.
- **AMS Slot Changes Stop Reaching Printer After Long Idle** ([#887](https://github.com/maziggy/bambuddy/issues/887)) — After printers sat idle for several hours, spool changes published by Bambuddy silently stopped reaching the printer — the UI updated but the printer ignored the command, and only a manual reconnect restored functionality. Root cause: the MQTT connection degraded into a zombie state where the receive path still worked (push_status telemetry kept flowing, so Bambuddy considered the connection alive) but the publish path was dead. The existing zombie detector — the developer mode probe — only ran on first connect when `developer_mode` was unknown; after the initial probe cached the value, subsequent zombie states went undetected because neither the staleness timer nor the keepalive could distinguish a half-open connection from a healthy one. The MQTT client now tracks `ams_filament_setting` command/response pairs: when a published command receives no response within 10 seconds, it's counted as unanswered. After two consecutive unanswered commands, the session is force-reconnected using the same `force_reconnect_stale_session()` mechanism. This catches zombie sessions at the moment the user encounters them — on their second failed spool change — rather than requiring a manual reconnect. Thanks to @RosdasHH for the detailed support bundles that made the diagnosis possible.
- **Obico Detection ML API Call Fails Silently With Empty Error** ([#172](https://github.com/maziggy/bambuddy/issues/172), [#1003](https://github.com/maziggy/bambuddy/issues/1003)) — The previous attempt at #1003 (0.2.3b4 dev) switched Bambuddy to **POST the JPEG bytes directly** to Obico's ML API as multipart form data, hoping to eliminate the callback-URL dependency for users behind reverse proxies with external auth. That approach cannot work: Obico's `/p/` endpoint is declared `methods=['GET']` upstream and only reads `?img=URL` as a query string (verified against `obico-server/ml_api/server.py`). Flask's router rejected every POST with 405 Method Not Allowed before any handler ran, which is why the Obico container logs showed zero activity while Bambuddy kept reporting `ML API call failed for printer N:` with a blank suffix — `raise_for_status()` on the 405 response produced an exception whose `str()` rendered empty in this path. Reverted to the pre-#1003 nonce-URL approach: the detection loop captures the JPEG locally with a 20 s timeout, stashes it under a 32-byte single-use nonce, and hands Obico a `GET /api/v1/obico/cached-frame/{nonce}` URL that resolves in <50 ms (so Obico's hardcoded 5 s read timeout never races our RTSP keyframe wait). The cached-frame route is un-authenticated at the Bambuddy layer — the unguessable 32-byte nonce with ~30 s TTL IS the credential. The warning log now also falls back to `type(exc).__name__` when `str(exc)` is empty, so future silent exceptions can never produce a blank error again. **For users behind reverse-proxy external auth (Authelia/Authentik/Cloudflare Access)**: the `/api/v1/obico/cached-frame/` path must be whitelisted from external auth — it's already public on Bambuddy's side. Thanks to @fblix for the ml-api-shows-zero-logs clue that pinpointed the 405 root cause.
- **Obico Detection Snapshot Killed by Stream Cleanup** ([#172](https://github.com/maziggy/bambuddy/issues/172)) — Third wave of #172 — once the cached-frame fix landed, `fblix` reported a permanent "Failed to capture snapshot" warning in the UI. The periodic camera stream cleanup task scans `/proc` for ffmpeg processes with Bambu RTSP URLs and kills any that aren't in the active-streams registry. The Obico detection service's `capture_camera_frame_bytes()` spawns its own short-lived ffmpeg process to grab a single JPEG frame, but that process was never registered with the stream cleanup — so when the 60-second cleanup cycle happened to run during the 5–10 s capture window, it killed the ffmpeg as "orphaned" (exit code -9). The detection service recovered on the next poll, but the kill produced unnecessary error logs and a missed detection frame. Fixed by tracking capture PIDs in a module-level set (`_active_capture_pids`) and excluding them from the `/proc`-scan kill list. Thanks to @fblix for the detailed timing analysis.
- **Direct Print from Library Not Attributed to User** — Clicking the Print button on a library file dispatched the job with no `created_by_id`, so the resulting archive had no owner and the print didn't show up in per-user statistics. The Queue and Reprint paths already forwarded the authenticated user; the library `POST /files/{file_id}/print` endpoint now does the same, reading the user from the JWT and passing it through to the dispatcher so direct prints are attributed like queued and reprinted ones.
- **Add/Edit Printer Modal Clipped on Short Viewports** ([#964](https://github.com/maziggy/bambuddy/issues/964)) — On short or zoomed-in browser windows, the Add Printer and Edit Printer dialogs exceeded the viewport height with no scroll, hiding the lower fields (Access Code, Model, Location) and the Save button. Users had to zoom the browser out to complete the form. The modal overlay now scrolls and the card caps at `calc(100vh - 2rem)` with internal overflow so every field stays reachable regardless of viewport height. Thanks to @MartinNYHC for reporting.
- **AMS Drying Silently Does Nothing** ([#971](https://github.com/maziggy/bambuddy/issues/971)) — Clicking Start Drying on a supported printer (e.g. P1S with AMS 2 Pro) could publish the MQTT command successfully but leave the AMS idle with no UI feedback. Two issues: (1) the firmware rejects the command when `dry_sf_reason` reports a blocking state (most commonly code 8 — AMS 2 Pro external power adapter not plugged in — but also "AMS busy", "already drying", etc.), and Bambuddy parsed that array but never surfaced it to the user; (2) the payload sent `filament: ""`, which some firmwares treat as an invalid-field refusal. The `/drying/start` endpoint now inspects the live `dry_sf_reason` for the target AMS unit and returns a descriptive 409 (e.g. "Plug in the external AMS power adapter to start drying") instead of silently publishing, and backfills an empty `filament` from the first loaded tray's type (defaulting to `PLA`) so the printer never rejects the command for a missing field. Thanks to @MartinNYHC for reporting.
- **Webhook Tokens Leaked into Logs When Debug Logging Enabled (Security)** — Turning on Settings → Support → Debug Logging elevated the `httpx` and `httpcore` loggers to DEBUG, which caused httpx to log the full URL of every outbound HTTP request. For Discord notifications and generic webhook notifications, the URL *is* the secret — the bearer token is embedded in the path — so any user who enabled debug logging (typically to capture logs for a bug report) was writing their Discord webhook token to `bambuddy.log` and then pasting it into GitHub issues or support bundles. `httpx`/`httpcore` are now pinned to `WARNING` regardless of the debug toggle; `paho.mqtt` still honours debug. If you enabled debug logging while notifications were sending, rotate any exposed Discord/webhook URLs — the token is in the path, so the whole URL must be regenerated in the provider's UI.
- **Queue Item Stuck in "Printing" When Start Command is Dropped** ([#967](https://github.com/maziggy/bambuddy/issues/967)) — If the physical printer dropped or ignored the MQTT `project_file` start command (same half-broken-session shape as #887/#936), the queue item was permanently orphaned in the `printing` status at 100% because the scheduler optimistically flipped the DB row to `printing` right after the publish succeeded locally and had no watchdog to revert it. Recovery required manually editing the SQLite `print_queue` table. A new watchdog now captures the printer's pre-dispatch state and polls for up to 45 s after `start_print()` returns; if the printer never transitions, the item is reverted to `pending` so the scheduler picks it up again, and the MQTT session is force-reconnected so the retry lands without a printer reboot. Thanks to @stringham for reporting.
- **Queued Prints Require Printer Reboot to Start** ([#936](https://github.com/maziggy/bambuddy/issues/936)) — On some printers, a queued print would be uploaded via FTP and the `project_file` MQTT command would be sent, but the printer never transitioned out of `FINISH`/`IDLE` and required a power cycle to unstick — after which it often started a previously cancelled print rather than the intended one. Root cause is a half-broken MQTT session (same shape as #887): the printer keeps publishing telemetry so Bambuddy reports it as connected, but our publishes on the command topic never reach the firmware. Existing recovery only triggered via the developer-mode probe path, which skips printers that already have a known `developer_mode` value. The print-dispatch verifier now treats an unacknowledged `project_file` (state unchanged after 15 s) as the same "commands not reaching printer" signal and forces a fresh MQTT session so the next dispatch can land without a printer reboot. The existing dev-mode probe path is refactored to share the same helper.
- **Clear Plate Confirmation Bypassed on Power Cycle** ([#961](https://github.com/maziggy/bambuddy/issues/961)) — With Auto Off enabled and another job queued, the smart plug would cut power when a print finished and immediately re-power when the scheduler saw the queue, at which point the printer booted fresh into `IDLE` and the next job auto-dispatched without the "Clear Plate & Start Next" confirmation. Root cause: the plate-cleared gate lived only in the in-memory `PrinterManager._plate_cleared` set, and the scheduler's idle check treated `IDLE` as always-idle regardless of whether a previous finish had been acknowledged — so the gate was lost across both Bambuddy restarts and the IDLE-on-boot state transition. The gate is now an `awaiting_plate_clear` column on the `printers` table, set by `on_print_complete` when a print finishes or fails, cleared by the `/printers/{id}/clear-plate` endpoint and by the scheduler when it dispatches the next job, and rehydrated from the DB into `PrinterManager` on startup. `_is_printer_idle` now short-circuits to not-idle whenever `require_plate_clear` is on and the printer is awaiting ack, regardless of the currently reported state — so the prompt survives Auto Off cycles, Bambuddy restarts, and the printer booting back into `IDLE`. The clear-plate endpoint no longer requires the printer to currently report `FINISH`/`FAILED` (it accepts the ack whenever the awaiting flag is set), and the Printers page widget prompts based on the flag rather than the reported state. Thanks to @miaopas for reporting.
- **Insecure Temp File Creation in Backup Export** — The manual backup download endpoint used `tempfile.mktemp()`, which is vulnerable to a symlink race condition (CWE-377). Replaced with `tempfile.mkstemp()` which atomically creates the file, eliminating the TOCTOU window.
- **Spoolman Iframe Blocked After 0.2.3b4 Security Headers** — The Spoolman page (Inventory → Spoolman iframe) failed to load when Spoolman was served from the same host as Bambuddy via a reverse proxy. The security-headers middleware added in 0.2.3b4 set `X-Frame-Options: DENY` on every response, which blocked even same-origin iframing. Relaxed to `SAMEORIGIN` so Spoolman (and any other same-origin tool behind the same reverse proxy) can be embedded again, while still preventing cross-origin clickjacking.
- **Large 3MF Print Restart Mid-Job Kept Duplicate Archive With Wrong Duration** ([#972](https://github.com/maziggy/bambuddy/issues/972)) — Second wave of #972 reports — a reproducer on a 37.5 MB BambuStudio-pushed print to an A1 surfaced three distinct problems that compounded across a Bambuddy container restart mid-print. (1) *Archive start_time lost*: the print-start handler only deduped existing `printing` archives by filename and marked them cancelled once older than 4 h — so a 13 h print that had a restart 10 h in got its archive cancelled, a brand-new archive created with `started_at = now()`, and the final duration displayed as ~1.5 h for a job that actually ran 13 h. Fixed by persisting the MQTT-provided `subtask_id` on every archive row (new `subtask_id` column, auto-added via the existing inline migration runner) and matching on that id first, regardless of age. Same id means same print; the row is resumed in place with its original `started_at`. Also revives `Stale`-cancelled rows from the legacy path if an earlier Bambuddy version already ran the old cancel-then-recreate logic. (2) *3MF search retried non-existent paths for ~48 min*: the path order was `/cache/ → /model/ → /data/ → /data/Metadata/ → /`, and every missing path burned the full retry budget (user had `ftp_retry_count = 10` with 30 s delay ⇒ 11 × 30 s × 4 missing paths ≈ 22 min before the real `/` root path was even tried). BambuStudio/OrcaSlicer actually push to `/` on A1-family printers, so the "most likely" path was tested last. Fixed by reordering to try `/` first, and by raising a new `FileNotOnPrinterError` sentinel from `download_to_file` when the FTP response is a 550 (file not found) so `with_ftp_retry`'s `non_retry_exceptions` short-circuits instead of waiting out the full delay ×11 retries against a path that will never have the file. Transient errors (425 "can't open data connection", SSL EOF, connection resets) still retry as before. (3) *Same 36 MB downloaded twice* — the cover-thumbnail endpoint and the archive-metadata handler each opened their own FTP session for the same file during the print, and the second session often hit 425 because the first was still using the printer's single FTP socket. Added a small in-memory `_threemf_path_cache` keyed on (printer_id, normalized filename): whichever flow fetches the 3MF first populates the cache, the other flow reuses the file read-only, and `on_print_complete` evicts the entry + deletes the temp file. Normalization collapses `Broly_X`, `Broly_X.3mf`, `Broly_X.gcode.3mf`, `Broly X`, and case variants to the same slot so both flows agree on the key. Net effect for the reproducer: what took ~48 min with a lost start time now takes seconds and the archive keeps its original row + timestamps. Thanks to @mstko for the reproducer and support bundles.
- **Large 3MF Files Silently Dropped After Print Finish** ([#972](https://github.com/maziggy/bambuddy/issues/972)) — After large prints, the Files tab rows arrived with no thumbnail, no filament breakdown and no cost — the archive row got created as a fallback with no 3MF even when the file was sittable on disk. Two root causes in the 3MF-fetch path. (1) The configured `ftp_timeout` setting (default 30 s, reporter had raised it to 300 s) was only plumbed through as the FTP *socket* timeout; the outer `asyncio.wait_for` wrapping `run_in_executor` was stuck on the hardcoded 60 s default, so the user's 300 s value never applied — every 3MF download was capped at 60 s regardless. (2) `asyncio.wait_for` cannot cancel `run_in_executor` threads: when the 60 s outer timeout fired, the executor thread kept running `ftplib.retrbinary` and frequently completed the download successfully ~30–60 s later — logging `"Successfully downloaded … N bytes"` and caching the working FTP mode — but by then the async wrapper had already returned `False`, so the retry loop kept re-attempting the same path, each attempt truncating the file the zombie thread had just written. After all 4 attempts the wrapper reported `failed after 4 attempts` and the archive was persisted as a fallback (no 3MF, empty `file_path`). The async wrapper now (a) accepts and uses `timeout` at each call site so `ftp_timeout` controls both the asyncio deadline and the socket deadline, and (b) salvages a post-timeout success: when the executor thread has set an explicit completion flag and the file is on disk, the wrapper returns `True` instead of discarding the result. Also fixes a cosmetic `//` prefix in the directory-search download path (`posixpath.join` replaces string concatenation that produced `"//file.3mf"` when the search dir was `"/"`). Thanks to @MartinNYHC for the report and @PurseChicken for the P1S support bundle.
- **SD Card Badge Removed** — After four rounds of fixes the printer-card SD status badge still flipped red on H2D when unrelated activity happened on the network (e.g. powering on an A1 caused every H2D to go red simultaneously). The underlying problem is that Bambu firmware SD-state signaling is not reliably derivable from MQTT: the legacy top-level `sdcard` field is only sent on some pushes with inconsistent typing, and `home_flag` bits 8-9 are cleared on heartbeat pushes even when a card is inserted, with no reliable way to distinguish heartbeats from full status reports. The badge has been removed entirely from the Printers page card and the Printer Info modal. Underlying `state.sdcard` parsing is retained (simplified to a plain truthy read of the `sdcard` field only, no more `home_flag` derivation, no heartbeat latches) because the firmware-update precondition check still needs to know whether a card is inserted before starting an update. Thanks to @MartinNYHC for the extensive reporting across all four rounds. Previously, this entry described the H2D badge flap and its three attempted fixes — kept here for history: The original bug toggled between "inserted" (green) and "not inserted" (red) every few seconds on H2D. Root cause: the MQTT parser used a strict identity check (`data["sdcard"] is True`) on the top-level `sdcard` field, but real firmware ships that field inconsistently — bool on some models, int `1`, or a string enum like `"HAS_SDCARD_NORMAL"` on others — so any message carrying a non-bool value flipped the state to `False`. Fixed by deriving the badge from `home_flag` bits 8–9 (`HAS_SDCARD_NORMAL` / `HAS_SDCARD_ABNORMAL`) when present — the canonical firmware source, same as door and store-to-SD parsing — and falling back to a truthy check on the top-level field for firmwares that only send that. Follow-up: the badge was still flapping because Bambu firmwares send partial MQTT pushes that carry the legacy `sdcard` field alone (without `home_flag`), and the fallback was re-engaging on every such push. The parser now latches `home_flag` as the canonical source for the session once seen, so partial pushes carrying only `sdcard` can no longer flip the badge; the latch resets on reconnect so a firmware change still re-learns. Second follow-up: on H2D the badge still showed red on initial Printers-page navigation and flipped to green on reload, because H2D also sends heartbeat-style `home_flag` pushes where bits 8–9 are clear even when a card is inserted. Downgrades from true→false now require three consecutive clear reads (upgrades false→true still apply immediately), so a single heartbeat no longer turns the badge red. Third follow-up: the three-strike counter still lost the race on idle printers — once an A1 or other printer connecting nearby triggered a burst of MQTT activity, idle H2Ds could accumulate ≥3 heartbeat pushes before the next full status report and all flip to red simultaneously. Reworked the derivation: the legacy top-level `sdcard` field is now authoritative when present (truthy check covers bool/int/string firmware variants), `home_flag` bits 8–9 are only consulted on full `push_status` reports (identified by the presence of multiple state markers like `gcode_state`, `mc_percent`, `nozzle_temper`, `print_type`, `stg_cur`, or `ams`), and bare heartbeat pushes carrying `home_flag` alone no longer affect SD state at all. Thanks to @MartinNYHC for reporting.
- **Archive Reprints Show Wrong Duration in Third-Party MQTT Monitors** ([#1011](https://github.com/maziggy/bambuddy/issues/1011)) — Re-printing a file from Bambuddy's archive caused external MQTT observers like OctoEverywhere to report wildly wrong durations: a 40 min job first reprint would show ~1 h 40 min, and a second reprint of the same file would compound further (~4 h for a ~45 min print), with the excess roughly matching the wall-clock gap since the previous archive replay. The same file printed via BambuStudio → Bambuddy proxy → printer reported correct durations every time. Root cause: the archive-reprint path built the MQTT `project_file` command with hardcoded `project_id="0"`, `subtask_id="0"`, `task_id="0"`, and `md5=""`, while BambuStudio mints unique identity fields per submission. The printer uses those IDs to key per-job state (including `gcode_start_time`), so when every reprint arrived under the same `task_id=0`, the printer reused the prior job's start timestamp instead of emitting a fresh state-transition event — third-party tools that derive duration from that timestamp latched onto a stale value, and successive replays compounded the error. `bambu_mqtt.start_print()` now generates a per-submission millisecond timestamp for `project_id`/`subtask_id`/`task_id` and a unique `md5` derived from the filename + timestamp, matching BambuStudio's per-submission-unique-ID behavior. Covers both archive reprints and direct prints from the Library. Thanks to @PurseChicken for the controlled A/B reproducer (Studio vs archive reprint) that pinpointed the divergence to the print-start command payload.
- **CSP Blocked Sidebar Iframes, Service-Worker Registration, and Google Fonts** — The strict `Content-Security-Policy` header added in 0.2.3b4 broke three things at once: (1) custom sidebar links pointing at external HTTPS URLs (e.g. a Grafana/telemetry dashboard) rendered in `ExternalLinkPage` were blocked because no `frame-src` was declared and iframes fell back to `default-src 'self'`; (2) the inline service-worker registration `<script>` at the bottom of `index.html` was blocked by `script-src 'self'`, silently preventing the PWA service worker from installing; (3) the `@import` of Google Fonts' Inter from `index.css` was blocked by `style-src` and `font-src`. Fixed by adding `frame-src 'self' https:` for user-configured HTTPS iframe targets, moving the inline SW-registration script into `/sw-register.js` so `script-src 'self'` covers it without needing `'unsafe-inline'` or per-build hashes, and allowing `https://fonts.googleapis.com` in `style-src` and `https://fonts.gstatic.com` in `font-src`. `frame-ancestors 'none'` is preserved so Bambuddy itself still cannot be framed cross-origin.

## [0.2.3b3] - 2026-04-12

### Improved
- **AMS Drying Support for P2S** — Remote AMS drying and queue auto-drying now work on P2S printers with firmware 01.02.00.00 or later. Previously P2S was hard-blocked from the drying feature.

### New Features
- **Scheduled Local Backups** ([#884](https://github.com/maziggy/bambuddy/issues/884)) — Settings → Backup now includes a "Scheduled Backups" card that automatically creates complete backup snapshots (database + all data directories) on an hourly, daily, or weekly schedule with configurable time-of-day and retention count. Backups are written as ZIP files to a configurable output directory (defaults to `DATA_DIR/backups/`), which Docker users can mount as a volume to their NAS or external storage. Each backup in the list can be downloaded, restored directly from the UI, or deleted individually. The manual backup download endpoint has also been optimized to stream directly from disk instead of loading the entire ZIP into memory, significantly reducing download wait times for large backups. Works with both SQLite and PostgreSQL installs. Fully localized across all 7 UI languages.
- **SpoolBuddy Device Management Tab** — Settings → SpoolBuddy now lists every registered SpoolBuddy device with live connection status, system details (firmware, IP, CPU temperature, memory, disk, OS, daemon and system uptime), hardware health flags (NFC / scale OK), and an Unregister button gated by a confirm modal. Previously, when a daemon crash caused SpoolBuddy to register itself twice, the kiosk UI silently used only the first device and there was no UI path to delete the orphaned duplicate — administrators had to delete the row directly in the database. A new `DELETE /spoolbuddy/devices/{device_id}` endpoint (gated by `inventory:delete`) handles the removal and broadcasts a `spoolbuddy_unregistered` websocket event so other tabs refresh immediately. A yellow warning banner appears when more than one device is registered to flag likely crash-duplicates. If an online device is accidentally unregistered, it will re-register itself on its next heartbeat. The Settings tab header also shows a device-count badge and a green/gray bullet indicating whether at least one registered device is online. Fully localized in English, German, and Japanese.
- **Print Files Directly from Project View** ([#930](https://github.com/maziggy/bambuddy/issues/930)) — The project detail page now lists the printable files from every linked library folder inline, with Play (Print Now) and CalendarPlus (Add to Queue) action buttons on each sliced file (`.gcode` and `.gcode.3mf`). No more round-tripping through File Manager to reprint project files. Prints triggered from the project view are automatically associated with the originating project, so the resulting archive shows up in that project's history without any manual assignment. Backend adds a `project_id` query parameter to `GET /library/files` that returns all files across linked folders in a single query (replacing the prior one-request-per-folder pattern) and validates `project_id` on both the direct-print and queue paths so a stale ID yields a 404 instead of a FK-constraint 500. Fully localized across all 7 UI languages. Thanks to @legend813 for the contribution.
- **Printers Page Search and Filters** ([#852](https://github.com/maziggy/bambuddy/issues/852)) — The Printers page now has a live search bar and two filter dropdowns (status and location) to make finding specific printers in large setups easier, especially on mobile where Ctrl+F is impractical. Search matches printer name, model, location, and serial number (case-insensitive, whitespace-trimmed) and has a clear button. The status filter covers All / Printing / Paused / Idle / Finished / Error / Offline and is reactive to WebSocket status updates via a React Query cache subscription — so a print finishing while "Printing" is selected immediately removes the printer from the filtered list. The location filter is only shown when at least one printer has a location configured. All three filters are combinable; the controls are hidden when no printers are configured yet; and an empty-state message appears when no printer matches the current search/filters. Fully localized across all 7 UI languages. Thanks to @legend813 for the contribution.
- **LDAP Default Fallback Group** — Settings → Authentication → LDAP → Advanced now has a "Default group" selector. When an LDAP user authenticates but is not listed in any mapped LDAP group, they are automatically assigned to this fallback group instead of being left without permissions. Previously such users could log in successfully but landed on empty pages because every permission check failed. Leave the setting empty to preserve the old behavior. A warning is logged each time the fallback is applied so administrators can spot missing group assignments.

### Changed
- **SpoolBuddy Auto-Wake on NFC/Scale** ([#945](https://github.com/maziggy/bambuddy/issues/945)) — The SpoolBuddy kiosk display now wakes automatically when a spool is placed on the scale or an NFC tag is scanned, without requiring a touch first. The daemon discovers the Wayland session from the shared runtime directory and toggles HDMI power via `wlopm`, coexisting with `swayidle` which continues to handle touch-based wake independently. Gracefully degrades when `wlopm` is not installed or no Wayland session is available. Thanks to @TravisWilder for the suggestion.
- **SpoolBuddy Kiosk LCD Now Powers Off on Idle** ([#937](https://github.com/maziggy/bambuddy/issues/937)) — The SpoolBuddy kiosk's "screen blank timeout" setting previously only painted a black CSS overlay over the browser window; the HDMI panel's backlight stayed on indefinitely, wasting power and letting OLED/LED panels burn in. The blanking path is now moved down to the OS layer: the install script installs `swayidle` and `wlopm`, and labwc's autostart launches a new watchdog (`spoolbuddy/install/spoolbuddy-idle.sh`) that queries the backend once on boot for the device's `display_blank_timeout` and hands it to `swayidle`, which powers HDMI off via `wlopm --off HDMI-A-1` after the configured idle period and powers it back on via `wlopm --on` when labwc delivers any input event (touch, keypress). The redundant CSS overlay and its pointer/keyboard listeners have been removed from `SpoolBuddyLayout` — one source of truth now. Screen blanking is opt-in: `display_blank_timeout=0` (the default) skips launching swayidle entirely and the display stays on forever, preserving current behavior for users who didn't pick a timeout. The default for users who newly enable blanking is 300 seconds. Changes made to the timeout in SpoolBuddy Settings → Display take effect on the next kiosk restart — tap Quick Menu → Restart Browser to apply without a full reboot. A new `GET /api/v1/spoolbuddy/devices/{device_id}/display` endpoint (gated on `inventory:update`, same as the existing `PUT` and heartbeat endpoints) is what the kiosk-side watchdog reads, so no new permissions are required on the device's API key. The watchdog also writes a full startup trace (env vars, resolved timeout, the exact `swayidle` command it execs) to `~/.cache/spoolbuddy-idle.log` so any future breakage on a different kiosk setup is trivially diagnosable, and auto-detects `WAYLAND_DISPLAY` from `XDG_RUNTIME_DIR` with a short retry loop in case labwc hasn't finished exporting its env by the time autostart runs. Thanks to @TravisWilder for reporting.

### Fixed
- **H2C Nozzle Rack Slot Numbering Off When Slot 1's Nozzle Is Mounted** ([#943](https://github.com/maziggy/bambuddy/issues/943)) — The H2C nozzle rack card on the Printers page rendered every rack slot shifted by one position whenever the lowest-numbered slot (rack ID 16, displayed as "slot 1") had its nozzle currently picked up into a hotend. In that state the printer firmware omits the mounted slot's ID from `device.nozzle.info` entirely instead of sending an empty placeholder, so the rack arrived with 5 entries (IDs 17..21) plus the 2 L/R hotends. The frontend was computing its rack base ID via `min(present_ids)`, which then became 17 instead of the fixed 16, and every remaining nozzle was rendered one position to the left — the nozzle physically in slot 2 appeared as "slot 1", slot 3 appeared as "slot 2", and so on, with the single empty placeholder falling off the right end as a phantom "slot 6" that should have been the actual empty "slot 1". The rack base is now hardcoded to 16 to match the fixed H2C rack ID layout (already encoded in the `test_h2c_nozzle_rack_populated_with_8_entries` backend test), so the empty slot stays anchored to its physical position regardless of which nozzle is currently in use. A frontend regression test exercises exactly this case (ID 16 missing, remaining slots in order) and asserts the rendered slot row reads `[—, 0.2, 0.6, 0.8, 1.0, 1.2]`. Thanks to @netscout2001 for reporting.
- **Energy Snapshot Capture Crashes on PostgreSQL** — With an external PostgreSQL database configured, the hourly smart-plug energy snapshot loop (introduced with the #941 fix) logged `asyncpg.DataError: invalid input for query argument $2: ... can't subtract offset-naive and offset-aware datetimes` every hour and failed to persist any snapshots, so date-filtered energy statistics in total-consumption mode stayed empty on Postgres installs. The engine already had a `before_cursor_execute` hook that strips `tzinfo` from bound datetime parameters before they reach asyncpg (the `smart_plug_energy_snapshots.recorded_at` column is `TIMESTAMP WITHOUT TIME ZONE` to match the rest of the schema), but the hook only stripped datetimes one level deep — when SQLAlchemy's `insertmanyvalues` feature batched multiple snapshot rows into a single `INSERT ... SELECT FROM (VALUES ...)` statement, parameters arrived as nested containers (lists of tuples, or a list inside an outer container) and the inner datetimes slipped through untouched. The hook now recursively walks any nesting of dict/list/tuple and strips `tzinfo` at any depth, so every parameter shape SQLAlchemy may use is handled. SQLite installs were never affected (SQLite ignores tzinfo entirely).
- **Wrong Filament Color Name Shown on Printer Tab AMS Popup** ([#857](https://github.com/maziggy/bambuddy/issues/857)) — PLA Translucent Cherry Pink (and other colors outside a small hand-maintained list) appeared as "Scarlet Red" on the Printer tab AMS slot popup, and was also auto-provisioned into the inventory under the wrong name on the first RFID read. Root cause: both the backend spool auto-provisioner and the frontend AMS popup resolved color names by looking up the Bambu `tray_id_name` code (e.g. `A17-R1`) in a hardcoded table, and when the exact code wasn't listed they fell back to a suffix-only lookup (`R1 → Scarlet Red`). The suffix half of that code is **not** globally unique across material families — `A17-R1` is PLA Translucent Cherry Pink, while `A01-R1` is PLA Matte Scarlet Red — so the fallback was structurally guaranteed to produce wrong names for any color the hand-maintained list didn't happen to cover. The resolver has been rewritten to use the existing `color_catalog` table (seeded from `catalog_defaults.py` plus the FilamentColors.xyz sync) as the single source of truth. Backend lookup is now by hex color against the catalog; the frontend fetches a compact `{hex: name}` map once per session via a new `GET /api/inventory/colors/map` endpoint (available to any authenticated user, not gated on `inventory:read`), stores it in a `ColorCatalogProvider` context, and uses it for all `getColorName()` calls. The hardcoded tables in `backend/app/core/bambu_colors.py`, `frontend/src/utils/colors.ts`, and `frontend/src/pages/PrintersPage.tsx` have been removed entirely. Existing spools that were auto-created with a wrong name before this fix need to be renamed manually — the fix only affects new auto-provisioning and live display. Thanks to @lightmaster for reporting.
- **LDAP Auto-Provisioning Fails on Upgraded SQLite Installs** ([#794](https://github.com/maziggy/bambuddy/issues/794)) — First LDAP login on an upgraded SQLite install hit `sqlite3.IntegrityError: NOT NULL constraint failed: users.password_hash` and fell through to a 500 response, because the `users` table on disk had been created before LDAP support landed with `password_hash VARCHAR(255) NOT NULL`. The model was already `nullable=True` and the migration to drop the constraint existed, but only ran on PostgreSQL — SQLite was skipped entirely because it has no `ALTER COLUMN ... DROP NOT NULL`. The migration now patches `sqlite_master` directly via `PRAGMA writable_schema` and bumps `PRAGMA schema_version` so the current connection reloads the table definition without requiring a restart. Fresh installs were never affected (they go through `Base.metadata.create_all` which uses the current nullable model). Thanks to @DylanBrass for reporting.
- **Energy Statistics Empty for Week/Month/Day in Total Consumption Mode** ([#941](https://github.com/maziggy/bambuddy/issues/941)) — With "Total consumption" selected as the energy tracking mode, the Statistics page showed the correct kWh total for All Time but zero for every time-filtered range (Today, This Week, This Month, …). The backend fell back to summing per-print archive energy whenever a date filter was active, but in total-consumption mode the per-print column was often empty for two reasons: (1) the starting-kWh value was held in an in-memory dict (`_print_energy_start`) that was lost on any backend restart mid-print, so prints that spanned a restart never got an energy delta computed; (2) historical prints from before a smart plug was added had no value at all. The fix replaces the in-memory dict with a persisted `energy_start_kwh` column on the archive row, and adds an hourly snapshot loop (`smart_plug_energy_snapshots` table) that captures each plug's lifetime counter. The `/archives/stats` endpoint now computes date-range totals via per-plug `(last-in-range − baseline)` deltas from those snapshots, clamping counter resets to zero. A warming-up flag is returned (and rendered as a tooltip next to the Energy stats on StatsPage) when the query runs on incomplete snapshot history — e.g. right after upgrade, before the hourly loop has built up a baseline before the selected range — so the "low" values during the first hours after upgrading are explained in-product rather than misread as a bug. Fully localized across all 7 UI languages. Per-print energy tracking is now restart-resilient in all modes as a side-effect. Thanks to Mike (@TheMadMike23) for reporting.
- **Virtual Printer "Synchronizing device information" Times Out in Orca** ([#927](https://github.com/maziggy/bambuddy/issues/927)) — OrcaSlicer's "Send job" flow sat on "Synchronizing device information…" until it gave up, even though the FTP upload itself worked when the user clicked "Send job anyway". The virtual printer's MQTT server gated all incoming command handling on `f"device/{self.serial}/request" in topic` — if the slicer's cached serial for the VP didn't exactly equal the VP's computed `self.serial` (which depends on model prefix + per-VP `serial_suffix`), every `get_version`, `pushall`, and `project_file` publish was silently dropped. Nothing was logged past the initial "MQTT publish to …" line, so the slicer never received a `push_status` or `get_version` response on its subscribed `device/{serial}/report` topic and hit its sync timeout. Status pushes, version responses, and project_file acknowledgments were *also* being published on `device/{self.serial}/report`, so even when the incoming check happened to pass, replies targeted a topic the slicer wasn't listening on if its serial had drifted. Both directions are now serial-adaptive: the handler accepts any authenticated publish on a `device/*/request` topic, extracts the serial the slicer is actually using from the topic, stores it per-connection, and uses it for every outgoing status report, version response, print acknowledgment, and periodic push so responses always land on the topic the slicer subscribed to. The client's serial is cleared when the connection closes and when the server stops. Regression tests cover the mismatched-serial publish path, the non-request-topic rejection path, the pushall→status_report routing, and the client-serial lifecycle.
- **External Sidebar Link Icon Not Showing** ([#878](https://github.com/maziggy/bambuddy/issues/878)) — Custom icons uploaded for external sidebar links rendered correctly in the edit dialog but were missing from the sidebar itself, and opening the icon URL directly returned `{"detail":"Valid camera stream token required..."}`. The sidebar `<img>` tag in `Layout.tsx` used a raw `/api/v1/external-links/{id}/icon` URL, but that endpoint is protected by a query-string stream token (the same mechanism used for camera streams and archive thumbnails, because `<img>` tags cannot send Authorization headers). The edit dialog already routed through `api.getExternalLinkIconUrl()`, which wraps the URL via `withStreamToken()`; the sidebar now does the same, so icons appear when auth is enabled.
- **Shortest Job First Toggle Disappears After Clicking** ([#879](https://github.com/maziggy/bambuddy/issues/879)) — The SJF toggle badge on the queue page was rendered inside the Pending Queue section header, which is only shown when there is at least one pending item and the list view is active. Clicking the toggle often coincided with the scheduler starting the only pending print, at which point the Pending section unmounted and the toggle vanished along with it — making it look like the button had disappeared after clicking. The toggle has been moved to the top of the queue page, next to the list/timeline view switcher, so it stays reachable regardless of pending-item count, active filters, or the selected view mode.
- **SpoolBuddy Update Fails in Docker with "no user exists for uid 1000/1001"** — The SpoolBuddy remote-update flow shelled out to the OpenSSH `ssh-keygen` and `ssh` binaries for keypair creation and command execution. Both binaries call `getpwuid(getuid())` at startup and abort with `No user exists for uid <N>` when the container runs under an arbitrary PUID that is not listed in `/etc/passwd` (the stock `python:3.13-slim` image only has an entry for root, so running with `user: "1000:1000"`, `"1001:1001"`, or any non-root user tripped the same error). The entire SpoolBuddy update path is now subprocess-free: keypairs are generated in-process via the `cryptography` library (already a dependency), SSH commands run through the pure-Python `asyncssh` client, and git-branch detection reads `.git/HEAD` directly instead of shelling out to `git`. asyncssh also calls `getpass.getuser()` for local `~/.ssh/config` host matching, which hit the same passwd lookup failure; the Docker image now sets `LOGNAME=bambuddy`, `USER=bambuddy`, and `HOME=/app` so `getpass.getuser()` resolves via env vars before touching the passwd database, and `asyncssh.connect()` is called with `config=[]` so it does not attempt to load `~/.ssh/config` at all. Branch detection also now looks for `.git/HEAD` in the *application root* rather than `settings.base_dir` — in Docker the data directory is a separate volume (`DATA_DIR=/app/data`) that never contains `.git`. Finally, the Docker build now bakes `.git/HEAD` into the image (`.dockerignore` allows this single 20-byte file through the context filter) so the production image knows which branch it was built from; previously the `.git` directory was excluded from the build context entirely, leaving the container with no git metadata and causing the SpoolBuddy update flow to always pull `main` on the remote device regardless of which branch Bambuddy itself was built from. Native installs behave identically — they already worked because the running user was always in `/etc/passwd` and `.git/HEAD` was readable from the project root. Regression tests assert that neither keypair creation nor command execution spawns any subprocess, and that branch detection reads from the application root even when a decoy `.git` sits inside the data dir.
- **Camera Stream "6 of 5" Reconnect Counter + ffmpeg Log Flood** ([#925](https://github.com/maziggy/bambuddy/issues/925)) — Two bugs surfaced while investigating camera reconnect behaviour. First, the camera page briefly displayed "Reconnecting attempt 6 of 5" before giving up, because the attempt counter could be incremented to the maximum while the reconnect banner was still rendering. The displayed value is now clamped to the configured maximum. Second, every failed ffmpeg spawn logged the full ~20-line ffmpeg version/configuration banner, producing hundreds of lines of noise per failed camera click (one reported click produced 555 log lines across 30 retries). A new stderr summarizer strips the ffmpeg banner before logging so only the actual error lines remain. The underlying "camera service stops accepting new connections after prolonged uptime" behaviour in the X1C firmware is still under investigation.
- **LDAP POSIX Primary Group Ignored** — LDAP authentication only looked at groups that listed the user explicitly via `memberUid` (supplementary group membership). A user's POSIX primary group — referenced by the `gidNumber` attribute on the user object and matching the `gidNumber` on a `posixGroup` — was ignored entirely, so users whose role came from their primary group landed without the expected permissions. The authenticator now also searches for `posixGroup` entries whose `gidNumber` matches the user's primary `gidNumber`, and dedupes DNs case-insensitively before resolving the group mapping (LDAP DNs are case-insensitive by spec).
- **Support Bundle Leaks Virtual Printer IP Address** — The debug support bundle included the `virtual_printer_remote_interface_ip` setting value unmasked in `support-info.json`. The setting key didn't match any of the existing sensitive-key filters, so the raw IP address was included in the bundle. Added `_ip` to the sensitive key filter so IP address settings are excluded from support bundles. Log file content was already covered by the existing IPv4 regex redaction.
- **"Build Plate Cleared" Button Unclickable After Second Print** ([#912](https://github.com/maziggy/bambuddy/issues/912)) — After completing the first queued print and confirming the plate was cleared, the "Build plate cleared — ready for next print" button became unresponsive after the second print finished. The React Query mutation's `isSuccess` state persisted from the first plate-clear confirmation, causing the component to render the static "Plate Ready" confirmation instead of the clickable button. The mutation state is now reset when the printer leaves the FINISH/FAILED state, so the button works correctly on every print cycle.
- **Spoolman Location Not Cleared When Spool Removed from AMS** ([#921](https://github.com/maziggy/bambuddy/issues/921)) — When Spoolman auto-sync was enabled and a spool was removed from an AMS slot, its location in Spoolman was never cleared, causing "double-booked" slots where multiple spools shared the same location. The auto-sync callback set locations for newly inserted spools but skipped the cleanup step that clears stale locations. The location clearing logic now runs after every auto-sync cycle. Also fixed the single-printer manual sync endpoint which didn't track synced spool IDs, risking incorrect location clearing for location-matched (non-RFID) spools.

## [0.2.3b2] - 2026-04-08

### New Features
- **Optional PostgreSQL Database Support** — Bambuddy can now use an external PostgreSQL database instead of the built-in SQLite. Set the `DATABASE_URL` environment variable (e.g., `postgresql+asyncpg://user:pass@host:5432/bambuddy`) to connect to Postgres. SQLite remains the default when no `DATABASE_URL` is set. All features work with both backends including full-text archive search (FTS5 on SQLite, tsvector+GIN on PostgreSQL), backup/restore (file copy vs pg_dump/pg_restore), health diagnostics, and cross-database restore (import a SQLite backup into PostgreSQL with automatic type conversion and FK handling).
- **Shortest Job First Queue Scheduling** ([#879](https://github.com/maziggy/bambuddy/issues/879)) — New SJF toggle badge on the queue page header. When enabled, the scheduler starts shorter print jobs before longer ones instead of FIFO order. A starvation guard ensures long jobs that get skipped once are protected from being skipped again — they move to the front of the queue on the next cycle. The queue display automatically reorders to show the scheduler's actual execution order. Print duration is cached on queue items at creation time from the 3MF metadata.
- **Auto-Print G-code Injection** ([#422](https://github.com/maziggy/bambuddy/issues/422)) — Configure custom start and end G-code snippets per printer model in Settings (Workflow tab) for bed-clearing systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. When adding a print to the queue, enable "Inject G-code" to have the scheduler inject the configured snippets into the 3MF before uploading to the printer. The original file is never modified — injection creates a temporary copy for upload only.
- **External Folder Subfolder Preservation** ([#890](https://github.com/maziggy/bambuddy/issues/890)) — Scanning an external folder now mirrors the real directory structure into the file manager folder tree instead of flattening all files into the root. Subdirectories are created as child LibraryFolders with correct parent/child hierarchy, and files are assigned to their matching subfolder. Hidden directories are skipped when "Show hidden files" is disabled. Subfolders that are deleted from disk are automatically cleaned up on the next scan. Created subfolders inherit the parent's read-only and show-hidden settings.
- **LDAP Authentication** ([#794](https://github.com/maziggy/bambuddy/issues/794)) — Users can now authenticate against an LDAP/Active Directory server. Configure the LDAP server URL, bind DN, search base, and user filter in Settings > Authentication > LDAP. Supports StartTLS, LDAPS (SSL), and plaintext connections. LDAP groups can be mapped to BamBuddy groups (Administrators, Operators, Viewers) for automatic role assignment. Auto-provisioning creates BamBuddy accounts on first LDAP login when enabled. Local admin accounts remain as fallback when the LDAP server is unreachable. Password management features (change password, forgot password, admin reset) are automatically disabled for LDAP users.
- **SpoolBuddy Quick Menu** ([#893](https://github.com/maziggy/bambuddy/issues/893)) — Swipe down from the top of the SpoolBuddy display to open a quick-access control panel. Toggle printer power via smart plugs directly from the display, and manage the SpoolBuddy system with restart daemon, restart browser, reboot, and shutdown controls. All destructive actions require confirmation. The menu shows real-time smart plug state (ON/OFF) for each printer that has a linked power plug.

### Improved
- **Database Engine Info on System Page** — The System Information page now shows the active database engine (SQLite or PostgreSQL) and its version in the Database section, making it easy to verify which backend is in use.
- **Plate Number in Printer View** ([#881](https://github.com/maziggy/bambuddy/issues/881)) — Printer cards and the stream overlay now show the plate number alongside the filename when printing plate 2+ of a multi-plate 3MF file (e.g. "MyModel — Plate 3"). Single-plate prints are unchanged.
- **Printer Name in Queue for Model-Based Jobs** ([#881](https://github.com/maziggy/bambuddy/issues/881)) — Queue items assigned to a printer type ("Any P1S") now show the actual printer name once the scheduler assigns a specific printer, instead of continuing to display the generic model target while printing or in history.
- **AMS Drying Support for H2S** ([#886](https://github.com/maziggy/bambuddy/issues/886)) — Remote AMS drying and queue auto-drying now work on H2S printers with firmware 01.02.00.00 or later.
- **REST Smart Plug: Separate Power/Energy URLs and Unit Multipliers** ([#472](https://github.com/maziggy/bambuddy/issues/472)) — REST/Webhook smart plugs can now use individual URLs for power and energy data instead of requiring all values in a single status response. Each value falls back to the shared Status URL when no separate URL is configured, so existing setups work without changes. Added power and energy multipliers for unit conversion (e.g., set energy multiplier to `0.001` to convert Wh to kWh). Useful for platforms like ioBroker that expose each data point as a separate API endpoint.

### Security
- **Path Traversal in File Upload Endpoints** — Archive upload endpoints (`/upload`, `/upload-bulk`, `/{id}/source`, `/source-by-name`, `/{id}/f3d`, `/{id}/timelapse`) used the client-supplied filename directly in file paths without stripping directory components. An authenticated attacker could write files outside the intended directory via directory traversal (e.g. `../../evil.3mf`). All upload endpoints now sanitize filenames by extracting only the basename before constructing paths. Reported responsibly by Sacha Vaudey via security@bambuddy.cool.
- **Unauthenticated Bug Report Endpoints** — The bug report endpoints (`/start-logging`, `/stop-logging`, `/submit`) had no authentication, allowing anyone on the network to enable debug logging, retrieve system logs, and trigger bug report submissions with system diagnostics when authentication was enabled. All three endpoints now require authentication — `start-logging` requires `settings:update` permission, `stop-logging` and `submit` require `settings:read`. Endpoints remain open when authentication is disabled (the default). Reported responsibly by Sacha Vaudey via security@bambuddy.cool.
- **API Key Empty Printer List Grants Full Access** — An API key with an empty `printer_ids` list (`[]`) was treated identically to `null` (global access to all printers), granting full printer access instead of no access. Now `null` means global access (admin key) and `[]` means no printer access. Existing API keys with empty lists are automatically migrated to `null` on startup. Also fixed the webhook queue endpoint which used a falsy check that would bypass the filter for empty lists. Reported responsibly by Sacha Vaudey via security@bambuddy.cool.
- **Missing HTTP Security Headers** — API responses did not include standard security headers. Added a middleware that sets `X-Content-Type-Options: nosniff` (prevents MIME-sniffing), `X-Frame-Options: DENY` (prevents clickjacking via iframe embedding), and `Referrer-Policy: strict-origin-when-cross-origin` (limits URL leakage to external services) on every response. `Content-Security-Policy` was omitted because the React SPA uses inline styles extensively and a permissive CSP would provide no meaningful protection. `Strict-Transport-Security` was omitted because Bambuddy is a LAN application commonly accessed over HTTP — HSTS would lock users out. Reported responsibly by Sacha Vaudey via security@bambuddy.cool.
- **Camera Snapshot Temp Files World-Readable** — Camera snapshot and plate detection endpoints created temporary JPEG files in `/tmp` with default 0644 permissions, making them readable by any local user. Switched from `NamedTemporaryFile(delete=False)` to `mkstemp` with explicit 0600 permissions so only the application user can read them. Cleanup was already handled via `finally` blocks. Reported responsibly by Sacha Vaudey via security@bambuddy.cool.

### Fixed
- **Spool Weight Not Updated After Print** ([#839](https://github.com/maziggy/bambuddy/issues/839)) — Filament usage tracking failed silently in several scenarios: (1) when FTP download failed and a fallback archive was created without a 3MF file, the primary tracking path was skipped entirely — now falls back to matching the 3MF from the library or a previous archive of the same file; (2) external/VT tray spools were never tracked by the AMS remain% fallback because it only iterated AMS unit trays — now captures and tracks VT tray remain% deltas; (3) notifications showed "Unknown" for time and filament on fallback archives — now enriches notifications with usage tracker results and captures estimated print time from MQTT at archive creation; (4) when auto-archive was disabled, `archive_id` was None at print completion so the entire 3MF tracking path was skipped — now searches library files and previous archives by filename to find the 3MF even without an archive, and captures the AMS slot-to-tray mapping at print start so it's available at completion regardless of archive state; (5) when auto-archive was disabled but the print was dispatched by BamBuddy (queue/reprint), the on_print_start callback discarded the expected print entry and returned early — the archive was never promoted to `_active_prints`, so at completion `archive_id` and `ams_mapping` were both None, making all tracking paths fail. Now detects expected prints before the auto-archive early-return and falls through to the normal promotion path, also injecting the stored `ams_mapping` into the usage tracker session.
- **File Manager Stale UI After Deleting Folders/Files** — Deleting a folder, file, or bulk-deleting items in the file manager appeared to succeed (toast shown) but the UI didn't update until a page reload. The delete endpoints (`delete_folder`, `delete_file`, `bulk_delete`) relied on FastAPI's dependency cleanup auto-commit which runs after the response is sent — the frontend received the success response, refetched the folder/file list, but the delete hadn't been committed yet. Added explicit `db.commit()` before returning in all three endpoints.
- **Spool Manager Deducts Double the Filament Used** ([#880](https://github.com/maziggy/bambuddy/issues/880)) — After a print completed, the built-in spool manager subtracted twice the actual filament consumption. The printer's MQTT status message contains both updated AMS remain percentages and the `FINISH` state, which triggered two independent deduction paths in the same event loop cycle: the AMS weight sync (absolute SET from remain%) and the usage tracker (additive delta from 3MF data). The AMS weight sync now skips updates while a print session is active, letting the usage tracker handle deductions precisely via 3MF slicer data.
- **Thumbnails Broken After Backend Restart** — Archive and library thumbnails returned 401 Unauthorized after a backend restart because stream tokens are stored in memory and lost on restart. The frontend now detects failed token-protected image loads and automatically refreshes the stream token, so thumbnails recover without a page reload.
- **SpoolBuddy Kiosk Screen Blanks on Boot** — The touchscreen display would blank immediately after the RPi booted, requiring a touch to wake. Added `consoleblank=0` to the kernel cmdline to disable Linux console blanking during the Plymouth-to-labwc transition, and changed the `wlr-randr` anti-blank loop to fire immediately instead of sleeping 60 seconds first.
- **Queue Widget Ignores Plate-Clear Setting** ([#752](https://github.com/maziggy/bambuddy/issues/752)) — The "Clear Plate & Start Next" button on printer cards appeared even when "Require plate-clear confirmation" was disabled in Settings → Queue. The backend correctly auto-dispatched without waiting, but the frontend widget always showed the prompt. The widget now respects the setting and shows a passive queue link instead when plate-clear confirmation is disabled.
- **Ghost Jobs From SQLite Lock on Print Completion** ([#897](https://github.com/maziggy/bambuddy/issues/897)) — When a print finished, the queue status update (`printing` → `completed`) could fail silently if the SQLite database was locked by another writer (e.g. the runtime tracker). The failed commit left the job permanently stuck in `printing` status — a "ghost job" that caused the UI to show false double-assignments when the next job started. The critical queue status commit now retries up to 3 times with backoff on SQLite lock errors (PostgreSQL is unaffected — it uses row-level locking). Additionally, the runtime tracker was holding a single long transaction across all printers; it now commits per-printer to minimize lock hold time.
- **Multi-Plug Automation Only Works for First Plug** ([#903](https://github.com/maziggy/bambuddy/issues/903)) — When multiple smart plugs were assigned to the same printer (e.g. a TUYA printer plug and a particle filter plug via Home Assistant), only the first plug's automation worked. The auto-on at print start, auto-off at print completion, and queue auto-off all queried for a single plug instead of iterating all plugs linked to the printer. All automation paths now control every assigned plug. Also fixed the queue auto-off path which was hardcoded to Tasmota instead of using the correct service for the plug type (HA, MQTT, REST).
- **SpoolBuddy Inventory Not Updating on Spool Changes** — Adding, editing, deleting, archiving, or restoring a spool in the internal inventory did not update SpoolBuddy's frontend views until the next manual refresh or 30-second poll. The spool CRUD endpoints did not emit websocket events, and the SpoolBuddy Dashboard had no polling fallback. All inventory mutation endpoints now broadcast an `inventory_changed` websocket event, and the frontend invalidates the spool cache on receipt — so SpoolBuddy (and all other tabs) reflect changes instantly.
- **AMS Slot Changes Fail Until Reconnect** ([#887](https://github.com/maziggy/bambuddy/issues/887)) — After a keep-alive timeout, paho-mqtt auto-reconnects but the new session can be half-broken: the printer continues sending status updates but silently ignores commands. The developer mode probe detected this (no response, leaving `developer_mode` as `null`), but had no timeout or recovery — one unanswered probe permanently blocked retries. Added a 10-second probe timeout with one retry; after two consecutive unanswered probes, Bambuddy force-closes the socket to trigger a clean reconnect with a fresh session. Additionally, the developer mode probe was firing on every auto-reconnect, which destabilized some firmware MQTT brokers (A1/P1 series) — causing a reconnect → probe → disconnect feedback loop. The probe result is now cached across reconnects and only runs once on the first connection, with a 5-second delay after connect to let the session stabilize.
- **WebSocket Crash on Printers Without `fun` Field** ([#873](https://github.com/maziggy/bambuddy/issues/873)) — Connecting to printers that don't send the MQTT `fun` field (A1, P1 series, X1Plus firmware) caused a repeating `'str' object has no attribute 'get'` crash in the WebSocket handler, showing the printer as offline with missing AMS and SD card info. The developer mode probe introduced in 0.2.3b1 published an MQTT message inside `_update_state()` between overwriting `raw_data` with the full MQTT dict (where `vt_tray` is a raw dict) and restoring the previously normalized list — the `publish()` call released the GIL, letting the event loop read the un-normalized dict and iterate over string keys instead of spool dicts. Fixed by normalizing `vt_tray` dict→list in the MQTT data before assignment, and moving preserved field restoration before the probe. Added defensive normalization in `printer_state_to_dict` as a belt-and-suspenders guard.

## [0.2.3b1] - 2026-04-02

### New Features
- **Queue Timeline View** ([#823](https://github.com/maziggy/bambuddy/issues/823)) — The queue page now has a production schedule view showing when each print is estimated to finish. Events are sorted chronologically and grouped by hour, with cards showing the file name, printer, estimated completion time, and time remaining. Active prints show a live progress bar. Filter by "Show All", "Printing", or "Queued", and navigate between days. Click any event to edit or stop it. Toggle between List and Timeline views with the button group above the queue.
- **Staggered Batch Start for Multi-Printer Jobs** ([#752](https://github.com/maziggy/bambuddy/issues/752)) — When sending a print to multiple printers via the queue, you can now stagger the starts to avoid power spikes from simultaneous bed heating. Enable "Stagger printer starts" in the schedule options to define a group size (how many printers start at once) and interval (minutes between groups). For example, 10 printers with group size 2 and interval 5 min will start in 5 waves over 25 minutes. Default group size and interval are configurable in Settings → Queue. Works with both ASAP and Scheduled timing — ASAP starts the first group immediately, subsequent groups get computed scheduled times. The stagger option is also available in the direct Print dialog when multiple printers are selected — prints are automatically queued with staggered start times, so you can close the browser and walk away.
- **Plate-Clear Confirmation Setting** ([#752](https://github.com/maziggy/bambuddy/issues/752)) — New "Require plate-clear confirmation" toggle in Settings → Queue. When disabled, the scheduler starts queued prints automatically on printers with finished jobs without waiting for per-printer plate confirmation. Useful for farm workflows where plates are verified physically before starting a batch. Default is enabled (existing behavior preserved).
- **Settings Queue Tab** — New dedicated Queue tab in Settings consolidates queue-related settings: staggered start defaults and auto-drying configuration (moved from the Filament tab).
- **Per-User Statistics Filtering** ([#730](https://github.com/maziggy/bambuddy/issues/730)) — Admins can now filter the Statistics page by user. A user dropdown appears in the stats header for users with the new `stats:filter_by_user` permission (Administrators only by default). Filter by a specific user to see their prints, filament usage, and costs, or select "No User (System)" to view prints without user attribution (e.g. slicer-initiated or pre-auth prints). The filter applies to all stats widgets and exports.
- **Bulk Printer Actions** ([#825](https://github.com/maziggy/bambuddy/issues/825)) — Select multiple printer cards and apply bulk actions from a floating toolbar. Toggle selection mode from the header, then click cards to select. Use "Select All", "Select by State" (printing, paused, finished, idle, error, offline), or "Select by Location" to quickly pick printers. Available actions: Stop, Pause, Resume, Clear Notifications, and Clear Bed — each button is smart-enabled based on the selected printers' current states. Confirmation modals for destructive actions (Stop, Pause, Clear Bed). The status summary bar now shows all printer states (printing, paused, finished, idle, error, offline).
- **Prefer Lowest Remaining Filament** ([#805](https://github.com/maziggy/bambuddy/issues/805)) — New optional setting in Settings → Filament that prefers AMS spools with the lowest remaining filament during auto-matching. When multiple spools match the same type and color, the one with the least filament remaining is selected first. Helps consume partial spools before starting new ones. Applies to queue scheduling, print modal, and multi-printer mapping. Unknown remain values (e.g. external spools without sensors) are treated as full. Disabled by default.
- **REST/Webhook Smart Plug Type** ([#472](https://github.com/maziggy/bambuddy/issues/472)) — New "REST" smart plug type for controlling power via generic HTTP APIs. Works with any home automation platform that has an HTTP endpoint (openHAB, ioBroker, FHEM, Node-RED, etc.). Configure separate ON/OFF URLs with custom HTTP methods (GET/POST/PUT/PATCH), request bodies, and headers. Optional status polling via a GET endpoint with JSON path extraction for state, power, and energy monitoring. Fully controllable — supports auto on/off with prints, daily scheduling, sidebar quick-toggle, and power alerts.
- **Configurable Default Print Options** ([#858](https://github.com/maziggy/bambuddy/issues/858)) — Print options (bed levelling, flow calibration, vibration calibration, first layer inspection, timelapse) now have configurable defaults in Settings → Workflow. Set your preferred defaults once and every new print dialog starts with those values. Still overridable per print.
- **Batch Print Quantity** ([#342](https://github.com/maziggy/bambuddy/issues/342)) — Print multiple copies of a file in one step. The print and schedule dialogs now have a quantity field — set it to any number and the system creates that many queue items automatically. When quantity is greater than one, items are grouped into a batch for tracking. In the direct print dialog, the first copy prints immediately while the remaining copies are queued. The queue page shows a batch badge on grouped items. Batch progress and cancellation are available via the API.
- **GitHub Backup: Spool Inventory & Print Archives** ([#870](https://github.com/maziggy/bambuddy/issues/870)) — GitHub backup can now include spool inventory and print archive history as optional toggles alongside the existing K-profiles, cloud profiles, and settings. Spool backup exports all spools with their material, brand, color, weight, cost tracking, RFID tags, and full usage history. Archive backup exports print history metadata (filament, temperatures, times, costs, energy) — no gcode/3MF binary files. Both are off by default and can be enabled independently in Settings → Backup & Restore.

### Improved
- **Standardized Webhook Notification Payloads** ([#871](https://github.com/maziggy/bambuddy/issues/871)) — Custom webhook notifications now include structured event data fields (`event`, `printer`, `filename`, `duration`, etc.) alongside the existing `title`, `message`, `timestamp`, and `source` fields. Previously, only `title` and `message` were sent, requiring automation tools to parse the message text for event details. All event-specific template variables are now included as top-level JSON fields, making it easy for n8n, Node-RED, Home Assistant, and other automation platforms to route and process notifications based on structured data. Slack/Mattermost format is unchanged.
- **Queue Page Visual Refresh** — Compact stats bar replaces the five summary cards (saves vertical space), color-coded left borders on all queue items for instant status scanning, collapsible history section (collapsed by default), and condensed single-line rows for history items showing more prints at a glance.
- **Developer Mode Detection for A1/P1 Printers** — Printers that don't send the `fun` field in MQTT status (A1, P1 series) now have developer mode detected via a probe command. After receiving the first full status update, Bambuddy sends a no-op external slot configure and checks whether the printer accepts or rejects it (`mqtt message verify failed`). Printers that do send the `fun` field (X1C, H2D, etc.) continue to use the existing bit-based detection. Developer mode state is re-checked on every reconnect.

### Fixed
- **Bed Cooled Notification Never Firing** ([#872](https://github.com/maziggy/bambuddy/issues/872)) — Replaced the polling-based bed cooldown monitor with an event-driven approach. The old implementation polled cached bed temperature every 15 seconds for up to 30 minutes after print completion, but some printer firmware (e.g. P2S 01.00.05.00) stops including `bed_temper` in MQTT updates after a print finishes — even in response to pushall requests — causing the cached value to stay frozen at the end-of-print temperature until the monitor timed out. The new approach registers a waiter at print completion and reacts instantly when `bed_temper` data arrives via MQTT, whenever that may be. No timeout, no polling, no stale data — the notification fires as soon as the printer reports the bed is at or below the configured threshold.
- **Filament Color and Subtype Inconsistencies** ([#857](https://github.com/maziggy/bambuddy/issues/857)) — Fixed several filament identification issues: (1) AMS slot popup showed generic color names like "Dark Gray" instead of Bambu-specific names like "Titan Gray" because the fallback skipped the Bambu hex color database. (2) "Silk+" subtype was missing from the known variants list, so the Edit Spool dropdown showed "Silk" instead. Also added "Tough+". (3) Gradient and Dual Color filaments were misclassified — PLA Basic Gradient was detected as "Basic" and PLA Silk Dual Color as "Silk" because the firmware only sends the base material in `tray_sub_brands`. Now detects gradient/multi-color/tri-color variants from the `tray_id_name` color code pattern (M\*/T\* suffixes).
- **External Spool Print Fails on Printers With AMS** ([#854](https://github.com/maziggy/bambuddy/issues/854), [#859](https://github.com/maziggy/bambuddy/issues/859)) — Two related issues with external spool printing: (1) Sending a print to a printer with no AMS units and only an external spool caused "Failed to get AMS mapping table" because the command was sent with `use_ams: true`. Now automatically sets `use_ams: false` when all filament slots map to external spools. (2) Printers with an AMS connected but empty (e.g. X1C with `ams_exist_bits=1, tray_exist_bits=0`) got stuck at heatbed heating or hit the same 07FF_8012 error because the print command used `ams_id: 254` in `ams_mapping2` instead of `255`. The firmware interpreted 254 as a physical AMS tray target instead of external spool. BambuStudio uses `ams_id: 255` (VIRTUAL_TRAY_MAIN_ID) for single-nozzle external spool. Fixed by mapping external spool to `ams_id: 255` on all non-H2D printers. H2D dual-nozzle printers retain 254 (deputy) / 255 (main) distinction.
- **External Folder Scan 500 Error on 3MF Files** ([#846](https://github.com/maziggy/bambuddy/issues/846)) — Scanning an external folder containing .3mf files crashed with "Object of type bytes is not JSON serializable". The parsed 3MF metadata contained raw thumbnail bytes (`_thumbnail_data`) that were stored directly in the database JSON column without cleaning. Also removed a call to the non-existent `parser.extract_thumbnail()` method — thumbnail data is already available in the parsed metadata. Now uses the same `clean_metadata()` pattern as upload and zip extraction.
- **Archives Capped at 50 Items** ([#843](https://github.com/maziggy/bambuddy/issues/843)) — The archives page only showed the 50 most recent prints due to a hardcoded API limit. Users with more than 50 archives could not see or access older entries. Fixed by fetching all archives and adding client-side pagination with configurable page sizes (25, 50, 100, 200, or All). Page size preference is persisted.
- **Filament Usage Not Recorded When Auto-Archive Disabled** — When a printer had "Auto-archive completed prints" turned off, filament consumption was silently lost. The `on_print_complete` callback returned early before reaching the usage tracking code, so neither the internal inventory (AMS remain% deltas) nor Spoolman received usage data. Moved filament tracking to run before the archive check so usage is always recorded regardless of the auto-archive setting.
- **H2D External Spool Uses Wrong Nozzle** ([#836](https://github.com/maziggy/bambuddy/issues/836)) — Prints sent from Bambuddy to dual-nozzle printers (H2D, H2D Pro) with external spools always routed to the wrong nozzle. The old `ams_mapping2` format used a shared `ams_id: 255` with `slot_id: 0/1` to differentiate external slots, but the firmware interpreted slot_id as the nozzle index (0=main/right, 1=deputy/left), routing filament to the opposite nozzle. Already fixed by the #797 `ams_mapping2` format change (per-tray `ams_id` instead of shared unit), but users on older builds still experience this. Printing the same file directly from the slicer worked correctly.
- **SpoolBuddy "Add to Inventory" Failed Silently** — The quick-add button on the SpoolBuddy kiosk did nothing when tapped. The scale weight was sent as a float but the backend requires an integer, causing a Pydantic validation error. The error was silently caught with no user feedback, leaving the confirmation modal stuck open. Fixed by rounding the weight before sending, moving the modal close to a `finally` block, and adding an error toast with the actual API message.
- **SpoolBuddy Dashboard Crash on Null Spool Fields** — Viewing a spool with null `subtype`, `brand`, `rgba`, or `color_name` on the SpoolBuddy dashboard crashed the UI (black screen). The spool prop construction used `displayedSpool?.subtype ?? sbState.matchedSpool!.subtype` — when the field was `null`, the `??` operator fell through to `sbState.matchedSpool` which could also be null, causing a TypeError. Fixed by picking one source object instead of mixing per-field fallbacks. Added a global React error boundary so future crashes show the error instead of a black screen.
- **Plate Thumbnails 401 in Print Modal** — Multi-plate 3MF plate thumbnails in the print modal returned 401 Unauthorized when authentication was enabled. The backend returns bare URL paths for plate thumbnails, but the `PlateSelector` component used them directly in `<img src>` without appending the stream token. Fixed by passing the URL through `withStreamToken()`.
- **Schedule Calendar Picker Opens Off-Screen** — Clicking the calendar icon in the print modal's scheduled mode opened the native date picker at the bottom of the viewport instead of near the date field. The hidden `datetime-local` input used `sr-only` positioning which anchored the picker off-screen. Fixed by positioning the hidden input inside the date field's container.
- **SpoolBuddy Kiosk Display Blanking and Crashes** — The kiosk Chromium flags added in 0.2.2.2 caused display instability: `--js-flags=--max-old-space-size=128` crashed the V8 renderer when heap exceeded 128 MB, `--enable-low-end-device-mode` aggressively killed GPU rendering surfaces, and resetting `CHROMIUM_FLAGS` discarded the Pi's GPU defaults (`--enable-gpu-rasterization`, ANGLE/GLES) creating an unstable mixed CPU/GPU rendering path. Fixed by removing both flags, appending kiosk flags to Pi defaults instead of replacing them, adding a `wlr-randr` keep-alive loop to prevent display blanking, and adding `<screenBlankTimeout>0</screenBlankTimeout>` to the labwc config.
- **Sidebar Bottom Icons Cut Off With Smart Plugs** ([#862](https://github.com/maziggy/bambuddy/issues/862)) — Adding smart plug buttons to the sidebar caused the bottom icon row to overflow and get partially cut off. The footer section could be compressed by the flexbox layout when the navigation area grew. Fixed by preventing the footer from shrinking, allowing the expanded icon row to wrap, and adding scroll overflow to the collapsed sidebar icon stack.
- **AMS History Cleanup Crash Every ~24 Hours** — The periodic cleanup of old AMS sensor history entries failed with "can't compare offset-naive and offset-aware datetimes". The cleanup cutoff used `datetime.now(timezone.utc)` (timezone-aware) but the `recorded_at` column stores naive datetimes via SQLite's `func.now()`. The mismatch caused a TypeError when SQLAlchemy processed the comparison. Fixed by using a naive UTC datetime for the cutoff. The error only appeared once per ~24h because the cleanup runs every 288 recording cycles (288 × 5 min = 24h).
- **SpoolBuddy Status Bar Not Updating on Printer Switch** — The bottom status bar on SpoolBuddy kiosk pages showed stale warnings (e.g. low filament) from the previously selected printer after switching to a different printer via the dropdown or swipe gesture. Two issues: (1) the AMS data cache was a single ref shared across all printers, so switching to a printer whose status hadn't loaded yet fell back to the previous printer's cached AMS data; (2) the Layout's alert useEffect unconditionally cleared alerts to null when the device was online, which could overwrite printer-specific alerts set by child pages. Fixed by keying the AMS cache per printer ID and tracking Layout-owned alerts separately so child page alerts aren't clobbered.

## [0.2.2.2] - 2026-03-27

### New Features
- **Persistent Auto-Off for Smart Plugs** ([#826](https://github.com/maziggy/bambuddy/issues/826)) — Smart plugs now have a "Keep Enabled" toggle under Auto Off settings. When enabled, auto-off stays active between prints instead of requiring manual re-enablement after each print (one-shot). Useful for accessories like BentoBox filters on Home Assistant switches that should always power off when a print completes. Default behavior (one-shot) is unchanged. Requested by @AeroMaestro.
- **Missing Spool Assignment Notification** ([#763](https://github.com/maziggy/bambuddy/issues/763)) — When a print starts and the AMS mapping references tray slots without assigned spools, Bambuddy now shows a warning toast in the frontend and can send push notifications via any configured notification provider. The notification includes the printer name, missing slot labels (e.g. A2, Ext-L), and expected material profile. A new "Missing Spool Assignment" toggle is available under Print Events in notification provider settings (off by default). Fully integrated with i18n (all 7 locales). Contributed by @Keybored02.
- **Mid-Print Spool Reassignment Tracking** ([#763](https://github.com/maziggy/bambuddy/issues/763)) — Usage tracking now correctly handles spool changes during a print. If a spool assignment is changed after a print starts, the system uses the live assignment for filament deduction; otherwise it falls back to the snapshot taken at print start. This ensures accurate filament tracking even when swapping spools mid-print. Contributed by @Keybored02.
- **Auto-Link Untagged Inventory Spools on AMS Insert** ([#538](https://github.com/maziggy/bambuddy/issues/538)) — When a Bambu Lab spool is inserted into the AMS and no existing tag match is found, the system now checks if there is an untagged inventory spool with the same material, subtype, and color. If found, the RFID tag is automatically linked to that existing spool instead of creating a duplicate entry. Uses FIFO ordering (oldest spool first) so spools are consumed in purchase order. Matching is case-insensitive. Requested by @wreuel.
- **External Folder Mounting for File Manager** ([#124](https://github.com/maziggy/bambuddy/issues/124)) — Host directories (NAS shares, USB drives, network storage) can now be mounted into the File Manager without copying files. Click "Link External" to point at a Docker bind-mounted path. Files are indexed into the database on scan but accessed directly from their original location — nothing is copied. Supports read-only mode (default, blocks uploads/moves/deletes), hidden file filtering, and automatic thumbnail extraction for 3MF, STL, gcode, and image files. External folders show a distinct icon and info bar with a rescan button. Deleting an external folder only removes the database index, never the actual files. Requested by @S1N4X.

### Improved
- **SpoolBuddy Kiosk Performance Optimizations** — Reduced idle CPU load on Raspberry Pi from ~3.3 to ~0.9. Frontend: replaced expensive CSS animations on the idle dashboard (`animate-ping` with scale transforms, `blur-2xl` glow, continuous `animate-pulse` on status dots) with static elements and a slow color-cycling spool (5s interval). Chromium: added `--disable-extensions`, `--disable-background-timer-throttling`, `--disable-renderer-backgrounding`, and `--disable-crash-reporter` to `/etc/chromium.d/spoolbuddy-kiosk`. WebSocket: SpoolBuddy Dashboard and Layout pages now use React Query `select` to extract only `connected` status from printer queries, so temperature/fan/progress updates no longer trigger re-renders on every MQTT tick. Services: stripped services are now masked (not just disabled) to prevent socket/dbus reactivation; user-level services (xdg-desktop-portal, mpris-proxy, pipewire, etc.) are masked globally via `/etc/systemd/user/` overrides instead of unreliable `su -l systemctl --user`. Removed chromium and upower from `strip_packages` since the kiosk needs them — they were being uninstalled then immediately reinstalled on every run.
- **SpoolBuddy AMS Slot Action Picker** — Clicking an AMS slot on the SpoolBuddy AMS page now shows a picker with contextual actions: Configure AMS Slot (set filament preset, K-profile, color), and either Assign Spool / Link to Spoolman (when no spool is mapped) or Unassign / Unlink (when one is). Works with both internal inventory and Spoolman. Previously the slot click went straight to the configure modal with no way to manage spool assignments.
- **Unassign Button in Edit Spool Modal** — The edit spool modal now has an "Unassign" button next to "Delete Tag" that removes the spool's AMS slot assignment, clearing the location column in the inventory table.
- **SpoolBuddy Settings Device Tab No Longer Scrolls** — Removed the branding card, folded Device ID into the Device Info card, placed Backend/Auth config and diagnostic buttons side by side in a 2-column layout, removed the redundant online/offline status row from Device Info, and tightened spacing throughout. The Device tab now fits on the small SpoolBuddy touchscreen without scrolling.
- **Spool Notes in Assign Spool Modal** ([#793](https://github.com/maziggy/bambuddy/issues/793)) — Spool cards in the Assign Spool modal now show the spool's note as a hover tooltip, making it easier to identify spools by tracking IDs or other metadata stored in notes. Works with both internal inventory and Spoolman-synced spools. Requested by @LegionCanadian.
- **WiFi Safeguard for SpoolBuddy Pi** — The install script now drops an APT hook (`/etc/apt/apt.conf.d/80-preserve-wifi`) that backs up NetworkManager WiFi connections before every `apt upgrade` and restores them if they get wiped. Prevents headless SpoolBuddy Pis from losing WiFi connectivity after Raspberry Pi OS package upgrades (observed with Bookworm kernel/raspi-config updates that clear `/etc/NetworkManager/system-connections/`).
- **SpoolBuddy Install Script Now Upgrades System Packages** — The install script now runs `apt-get upgrade -y` after installing required packages and the WiFi safeguard. This ensures the Pi is fully up to date before SpoolBuddy is deployed, and the WiFi safeguard protects connectivity during the upgrade.
- **SpoolBuddy Assign-to-AMS Material Mismatch Warnings** — The SpoolBuddy "Assign to AMS" modal now warns when the spool's material or slicer profile doesn't match the target slot's current filament. Shows a confirmation dialog with five warning levels: exact material mismatch, partial material match, profile-only mismatch, and combined material+profile mismatches. Respects the global `disable_filament_warnings` setting. Previously, assigning a spool to an occupied slot proceeded without any validation, matching the behavior already present in the main Assign Spool modal.
- **Spool Assignment Changes Sync Across Tabs** — Assigning or unassigning a spool now broadcasts a WebSocket event to all connected clients. Other open browser tabs and the SpoolBuddy frontend update automatically without requiring a page reload.
- **SpoolBuddy Inventory Page** — Added a new Inventory page to the SpoolBuddy kiosk UI, accessible from the bottom navigation bar between Write and Settings. Shows a responsive catalog grid of spools with colored spool circles (matching AMS page style), material/subtype labels, color dots, fill level bars, remaining weight with percentage, and green AMS location badges (A1, B2, etc.) for assigned spools. Includes a search bar (filters by material, subtype, brand, color, notes) and touch-friendly inline filter pills ("All", "In AMS", per-material). Tapping a spool opens a full-screen detail view with spool icon, remaining bar, AMS assignment, weight breakdown, slicer filament, PA K-profiles (name and value), temperature range, cost, tag ID, and notes. Detail view updates live from query data. Assigned spools sort first. When Spoolman is enabled, the page shows the Spoolman UI instead.
- **SpoolBuddy Auto-Navigate on Tag Scan** — When an NFC tag is detected while the SpoolBuddy UI is on a non-dashboard page (Settings, AMS, Write Tag, etc.), the frontend automatically navigates back to the main dashboard to show the scanned spool. Also wakes the screen if the display was blanked.
- **SpoolBuddy Swipe to Switch Printers** — Swiping left/right on the SpoolBuddy touchscreen now cycles through online printers instead of triggering browser back/forward navigation. The selected printer updates in the top bar dropdown. Requires at least two online printers; single-printer setups are unaffected.
- **SpoolBuddy Virtual Keyboard Layout Fix** — The virtual keyboard now participates in the flex layout instead of overlaying as a fixed element. When the keyboard opens, the bottom nav and status bar are hidden and the content area shrinks to fit, eliminating the dead space gap between content and keyboard on the Inventory page. Number inputs (e.g. Weight field on Write Tag) now accept virtual keyboard input.
- **Removed Diagnostic Buttons from Write Tag Page** — Removed the "NFC Diag" and "Scale Diag" buttons from the NFC status panel on the Write Tag page. These diagnostics are accessible from the Settings page and don't belong on the tag writing flow.
- **SpoolBuddy Assign Spool Modal No Longer Clips Display** — The shared Assign Spool modal overflowed off-screen on the small SpoolBuddy touchscreen, hiding the footer buttons. Added scoped CSS in the SpoolBuddy AMS page that caps the modal at 90vh with a scrollable spool list, without affecting the main Bambuddy frontend.
- **SpoolBuddy System Tab** — Added a "System" tab to SpoolBuddy Settings showing live OS stats from the Raspberry Pi: CPU temperature, core count, load average, memory usage, disk usage, OS distro/kernel/architecture, Python version, and system uptime. Stats are collected by the daemon every heartbeat (10s) using stdlib-only reads from `/proc` and `/sys` — no additional dependencies required. Usage bars turn amber at 70% and red at 90%; CPU temperature is color-coded green/amber/red.
- **SpoolBuddy Boot Splash Polished** — New splash image displays only the SpoolBuddy logo (removed Bambuddy branding) with green glow bloom, radial gradient background, light rays, and vignette. A generator script (`generate_splash.py`) is included for easy customization. Also reduced redundant initramfs rebuilds during install by deferring the rebuild until after the Plymouth theme is configured.

### Security
- **Token-Based Auth for Media Endpoints** — Camera streams, snapshots, thumbnails, timelapse videos, photos, QR codes, and cover images served via `<img>`/`<video>` tags now require a stream token query parameter (`?token=xxx`) when authentication is enabled. Previously these endpoints were unauthenticated because browser media elements cannot send `Authorization` headers. The frontend obtains a 60-minute reusable token via `POST /printers/camera/stream-token` (requires `CAMERA_VIEW` permission) and automatically appends it to all media URLs. Affects endpoints in camera, archives, library, printers, print-log, and external-links routes. When auth is disabled (default for local installs), behavior is unchanged — no token required.

### Fixed
- **Native Install Misdetected as Docker in LXC Containers** — The update check falsely identified native installs as Docker when running inside Proxmox LXC containers. The detection logic used `.git/` directory absence as a Docker fallback, but LXC containers may also lack `.git/` depending on how the install was deployed. Replaced the `.git/` fallback with a proper check of `/run/systemd/container` which only matches Docker/Podman/OCI runtimes, not LXC. Native installs in LXC containers now correctly show the in-app update button instead of Docker Compose instructions.
- **Print Fails on Files With Spaces in Name** ([#824](https://github.com/maziggy/bambuddy/issues/824)) — Printing files with spaces in their filename (e.g. "Junktion Box PRO 90.3mf") caused the printer to silently ignore the print command and remain IDLE. The FTP upload succeeded, but the MQTT print command's `url` field (`ftp://file name.3mf`) contained unencoded spaces that the firmware couldn't parse. Fixed by replacing spaces with underscores in the remote filename before upload.
- **SpoolBuddy Low Filament Warning Missing Slot Number** — The status bar low filament warning showed "AMS B" instead of the specific slot like "B2". Now uses `formatSlotLabel` to display the full slot label (e.g. "Low Filament: PLA (B2) - 4% remaining").
- **SpoolBuddy Read Tag Diagnostic Fails on NTAG Tags** — The `read_tag.py` diagnostic script had five issues preventing NTAG reads: (1) SAK `0x04` (MIFARE Ultralight family) was rejected as "unsupported tag type" — now accepts both `0x00` and `0x04`. (2) `ntag_read_pages` had TX CRC off (should be on per NTAG spec), no Crypto1 clear, and no IDLE→TRANSCEIVE state reset. (3) The PN5180 enters an unrecoverable state after an NTAG READ command — added full GPIO hardware reset between each 4-page batch. (4) Reading past the end of smaller tags (MIFARE Ultralight has 16 pages vs NTAG's 44+) caused a hard failure — now returns partial data gracefully. (5) `ntag_write_page`/`ntag_write_pages` had the same stale CRC/state issues plus unreliable ACK checking and post-write verification — synced with daemon.
- **Delete Tag Leaves Stale Tag Type** — The "Delete Tag" button in the spool edit modal only cleared `tag_uid` but left `tray_uuid`, `tag_type`, and `data_origin` intact. All tag-related fields are now cleared together.
- **SpoolBuddy NFC Write Fails on NTAG Tags** — Multiple issues prevented writing to NTAG 213/215/216 tags. (1) Some chips report SAK `0x04` (MIFARE Ultralight family) instead of `0x00` during anticollision — both `0x00` and `0x04` are now accepted. (2) TX CRC was disabled for NTAG commands but the spec requires it — enabled for both WRITE and READ. (3) The PN5180 state machine needed IDLE→TRANSCEIVE resets (not just `set_transceive_mode()`) and Crypto1 cleared before NTAG operations. (4) The 4-bit WRITE ACK cannot be captured by the PN5180 (SOF detected but no RX_IRQ) — removed per-page ACK checking. (5) Post-write read-back verification also failed (second READ command gets no response from the PN5180) — removed verification since the tag reliably ACKs each write.
- **Database Connection Pool Exhaustion on Large Printer Farms** — Users with 100+ printers connected simultaneously experienced `QueuePool limit of size 10 overflow 20 reached, connection timed out` errors. Increased the SQLAlchemy connection pool from 30 total (10 base + 20 overflow) to 220 (20 base + 200 overflow), and raised the SQLite busy_timeout from 5 to 15 seconds to reduce write contention under heavy concurrent MQTT updates.
- **SpoolBuddy Update Check Always Shows "Up to Date"** — The SpoolBuddy daemon update check compared the device's firmware version against GitHub releases instead of the running Bambuddy backend version. This meant the check could incorrectly report "up to date" even when the daemon was behind. Fixed by comparing directly against `APP_VERSION` from the backend config.
- **SpoolBuddy Updates Now Use SSH** — Replaced the fragile self-update mechanism (daemon pulls its own code via git, permission errors on `.git/`, hardcoded `main` branch) with SSH-based updates driven by the Bambuddy backend. Bambuddy now SSHes into the SpoolBuddy Pi and runs git fetch/checkout, pip install, systemctl restart, and kiosk browser restart remotely. Updates automatically use the same branch as Bambuddy. SSH key pairing is fully automatic — Bambuddy generates an ED25519 keypair and includes the public key in the device registration response; the daemon deploys it to `authorized_keys` on first connect. The install script creates the `spoolbuddy` user with a bash shell and sudoers entries for daemon and kiosk restart. A "Force Update" button allows re-deploying even when versions match. The SSH public key is also shown in SpoolBuddy Settings → Updates → SSH Setup for manual pairing if needed.
- **Frontend Not Updating After Deploy** — The service worker used stale-while-revalidate for JS/CSS assets, serving the old cached bundle even after a new build was deployed. Changed to network-first for JS/CSS (Vite content-hashes filenames so cache-busting is built in), bumped SW cache version, and added `Cache-Control: no-cache` to the `sw.js` endpoint so browsers always pick up new service worker versions immediately. The SpoolBuddy kiosk now skips SW registration entirely and unregisters any existing SW — a touchscreen kiosk has no use for offline caching and it was the main source of stale frontend issues after updates.
- **SpoolBuddy Kiosk Starts Before Network Is Ready** — On fresh installs, the kiosk browser launched before the network was fully up, showing a connection error for 10-15 seconds until connectivity was restored. The getty@tty1 autologin override now waits for `network-online.target` so Chromium has connectivity when it starts.
- **SpoolBuddy Update UI Stale After Restart** — After a SpoolBuddy update, the UI permanently showed the old version and "update available" because: (1) the SSH update set status to `"complete"` after the daemon had already re-registered, overwriting the cleared state; (2) the kiosk restart navigated away from the updates page; (3) query cache served stale data. Fixed by letting daemon re-registration clear all update status, removing the kiosk restart in favor of a frontend-driven `window.location.reload()` triggered via WebSocket when the daemon comes back online, and adding proper loading states to Check/Force Update buttons.
- **Virtual Printer Proxy A1 Printing Fails** ([#757](https://github.com/maziggy/bambuddy/issues/757)) — BambuStudio could not send prints to A1 (and potentially P1S) virtual printers in proxy mode. The slicer connects to undocumented proprietary ports 2024-2026 on these models, which the proxy was not forwarding, causing BambuStudio to show an access code dialog instead of printing. Added transparent TCP pass-through proxying for ports 2024-2026. These ports are silently ignored on models that don't use them (X1C, H2C, P2S). Also added ports 2024-2026 to the docker-compose.yml bridge-mode port mapping.
- **Spool Assignment on Empty AMS Slots** ([#784](https://github.com/maziggy/bambuddy/issues/784)) — Empty AMS slots (no physical spool detected) showed "Assign Spool" and "Configure" buttons in the hover popup. Assigning a spool to an empty slot created a stuck state because no "Unassign" button is available for empty slots. Truly empty slots now hide both buttons, while slots with a spool inserted but filament not loaded still show configure/assign. Also fixed stale AMS slot data on H2D and other printers that only send `{id, state}` in incremental MQTT updates — filament load/unload transitions now update in real-time without requiring a reconnect.
- **Spoolman Sidebar Opens Root URL Instead of Spool Page** — When Spoolman is enabled, clicking the Filament sidebar item embedded Spoolman at its root URL instead of the spool management page. The iframe now navigates to `<spoolman_url>/spool`.
- **Log Flood: "State is FINISH but completion NOT triggered"** ([#790](https://github.com/maziggy/bambuddy/issues/790)) — A diagnostic log message introduced in 0.2.2.1 fired on every MQTT update while a printer sat in FINISH or FAILED state, flooding logs with thousands of lines per minute in printer farms. Fixed by only logging once on the initial state transition, and marking `_completion_triggered = True` when a terminal state is first seen without a prior RUNNING state so the flag is clean for the next print cycle.
- **H2D External Spool Print Fails With "Failed to get AMS mapping table"** ([#797](https://github.com/maziggy/bambuddy/issues/797)) — Printing from an external spool on H2D (and H2D Pro) through Bambuddy failed with `0700_8012 "Failed to get AMS mapping table"`, while the same print worked fine from BambuStudio. Bambuddy was passing raw virtual tray IDs (254/255) in the flat `ams_mapping` array, but BambuStudio converts these to -1 and relies on `ams_mapping2` for external spool routing. The H2D firmware rejects raw 254/255 in the flat array. Also fixed the `ams_mapping2` format for external trays — each virtual tray is its own AMS unit with `slot_id: 0`, not a shared unit differentiated by slot.
- **SpoolBuddy Scale First Reading Always Wrong** — The NAU7802 ADC always returns a stale max-scale value (`0x7FFFFF`) on its first conversion after power-up, which polluted the moving average and made the initial weight report wildly inaccurate. Fixed by flushing the first reading during `init()` so all subsequent reads return valid data. Also extracted both hardware drivers out of diagnostic scripts into proper modules — the NAU7802 scale driver from `scripts/scale_diag.py` into `daemon/nau7802.py`, and the PN5180 NFC driver from `scripts/read_tag.py` into `daemon/pn5180.py`. The production daemon was importing driver classes from test scripts since the original SpoolBuddy commit. Removed the now-unnecessary `sys.path` hack from `main.py`.
- **ffmpeg Process Leak Causing Memory Growth** ([#776](https://github.com/maziggy/bambuddy/issues/776)) — Camera stream ffmpeg processes accumulated over time, consuming several GB of RAM. When a user closed the camera viewer, the frontend sent a stop signal that killed the ffmpeg process, but the backend stream generator interpreted the dead process as a dropped connection and respawned ffmpeg — up to 30 reconnection attempts per stream. The orphan cleanup couldn't catch these because they were tracked as "active". Fixed by signaling the generator's disconnect event from the stop endpoint before killing the process, checking for stream removal before reconnecting, and tracking frame timestamps per-stream instead of per-printer so stale detection works correctly when multiple streams exist. Reported by @ChrisTheDBA,

## [0.2.2.1] - 2026-03-22

### New Features
- **SpoolBuddy OTA Updates** — SpoolBuddy devices can now be updated directly from the Settings → Updates tab without SSH access. Click "Check for Updates" to see if a newer version is available, then "Apply Update" to trigger the update. The daemon picks up the command via its heartbeat, pulls the latest code from GitHub, installs dependencies, and restarts automatically via systemd. Live progress is shown in the UI with status messages from the device. The status bar at the bottom automatically checks for updates every 5 minutes and shows a prominent message when one is available. Requires the device to be online.
- **Select Plates to Queue** ([#777](https://github.com/maziggy/bambuddy/issues/777)) — Multi-plate 3MF files now support selecting a subset of plates to queue, instead of only "one plate" or "all plates". In add-to-queue mode, each plate has a checkbox for multi-select, with a "Select All / Deselect All" toggle. Reprint and edit modes remain single-select. Requested by @stringham.
- **Camera Image Rotation** ([#672](https://github.com/maziggy/bambuddy/issues/672)) — Added per-printer camera rotation (0°, 90°, 180°, 270°) for cameras mounted in portrait or upside-down orientations. Configurable in Settings → Camera for each printer. Rotation applies to live stream, embedded viewer, stream overlay, and notification snapshots. Requested by @wrenoud.
- **Per-User Email Notifications** ([#693](https://github.com/maziggy/bambuddy/pull/693)) — When Advanced Authentication is enabled, individual users can now receive email notifications for their own print jobs. A new "Notifications" page lets each user toggle notifications for print start, complete, failed, and stopped events. Only prints submitted by that user trigger their email — other users' prints are not affected. Requires SMTP to be configured and the "User Notifications" toggle enabled in Settings → Notifications. Administrators and Operators have access by default; Viewers do not. Contributed by @cadtoolbox.

### Fixed
- **SpoolBuddy Daemon Reports Stale Version** — The SpoolBuddy daemon maintained its own hardcoded `__version__` that was never bumped to `0.2.3b1`, causing the update check to incorrectly show an update from `0.2.2b1` to the latest release. Fixed by reading the version at import time from the backend's `APP_VERSION` in `backend/app/core/config.py` — the single source of truth — so the daemon version is always in sync.
- **SpoolBuddy Update Columns Missing from Database** — The OTA update feature added `update_status` and `update_message` to the device model but was missing the database migration, causing "no such column" errors on existing installations.
- **Queue Print Command Not Reaching Printer** ([#778](https://github.com/maziggy/bambuddy/issues/778)) — When a queue item targeted a specific printer and the scheduler's power-on-wait loop triggered, each reconnection attempt created a new MQTT client that re-attempted subscribing to the request topic. On printers whose broker rejects this subscription (e.g. A1), this caused repeated connect/disconnect cycles for up to 170 seconds, leaving the MQTT connection in a fragile state where the print command could silently fail to reach the printer. Fixed by caching request topic support state per serial number at the class level, so new client instances skip the subscription immediately instead of rediscovering the rejection. Reported by @RubenKremer.
- **Stale MQTT Connection Not Recovering** ([#813](https://github.com/maziggy/bambuddy/issues/813)) — When a printer's MQTT connection went stale (no messages for 60+ seconds), Bambuddy marked it as disconnected but did not force the underlying TCP socket closed, so paho-mqtt's auto-reconnect never triggered and print commands were silently published into a dead connection. Fixed by force-closing the socket on stale detection so paho's loop thread detects the break and auto-reconnects. The initial fix caused rapid connected/disconnected bouncing in the UI because frontend status polls triggered repeated socket force-closes before paho could finish reconnecting; added a 30-second cooldown between stale reconnect attempts so paho has time to re-establish the connection. Also uses a flag to suppress the redundant disconnect callback broadcast. Relaxed MQTT keepalive from 15s to 30s — the aggressive 15s keepalive caused spurious disconnects on transient network hiccups. Added reconnect backoff (1-30s) and unique-per-process MQTT client IDs to prevent broker session takeovers. Error disconnects (`rc.is_failure`) are never suppressed by the spurious-disconnect filter. The disconnect event used by `disconnect()` is fired unconditionally at the top of the callback so that no early-return filter can prevent it from unblocking callers. Reported by @inkdawgz.
- **P1S/P1P Printer Card Shows "Printing" When Idle** ([#813](https://github.com/maziggy/bambuddy/issues/813)) — Some P1S and P1P firmware versions report `stg_cur=0` when idle, which maps to the "Printing" stage name and overrides the correct "Idle" gcode_state on the printer card. The System Info page was unaffected because it displays the raw gcode_state. Extended the existing A1/A1 Mini workaround for this firmware bug to also cover P1S and P1P models. Reported by @inkdawgz.
- **AMS Slot Search Shows Unrelated Profiles** ([#681](https://github.com/maziggy/bambuddy/issues/681)) — Searching for a non-existent filament profile in the AMS slot configuration showed unrelated profiles instead of an empty result. The saved preset bypassed the search filter entirely, so stale mappings (e.g. a slot previously configured with "Bambu PLA Matte" that now holds a Silk spool) would always appear regardless of the search query. The saved preset now only bypasses the printer model filter, not the search filter. Reported by @RosdasHH.
- **Virtual Printer FTP Routed to Wrong VP** ([#735](https://github.com/maziggy/bambuddy/issues/735)) — When running multiple virtual printers with different access codes on separate bind IPs, FTP connections were routed to the wrong VP. Root cause: the iptables `REDIRECT` rule rewrites the destination IP to the incoming interface's primary address, so all FTP traffic went to the first VP regardless of the intended target. Fix: FTP server now binds directly to port 990 (standard implicit FTPS), eliminating the need for iptables redirect. Requires `CAP_NET_BIND_SERVICE` (already set in the systemd service and Docker image). Also removed a global `set_exception_handler()` in the MQTT server that caused spurious error messages when running multiple VPs. See `docs/migration-vp-ftp-port.md` for migration steps. Reported by @VREmma.
- **X1C Virtual Printer Not Accepting Sends** ([#735](https://github.com/maziggy/bambuddy/issues/735)) — X1C (and X1) virtual printers were advertised with legacy SSDP model codes (`3DPrinter-X1-Carbon` / `3DPrinter-X1`) that BambuStudio doesn't recognize, causing "incompatible printer preset" when sending. Fixed to use the correct codes (`BL-P001` / `BL-P002`). Also fixed proxy mode auto-inherit storing the printer's display name (e.g. `X1C`) instead of the SSDP code. Existing VPs are automatically migrated on startup. Reported by @RosdasHH.
- **White Filament Color Swatches Invisible in Light Theme** ([#726](https://github.com/maziggy/bambuddy/issues/726)) — Filament color circles used a white border that was invisible against light theme backgrounds, making white spools indistinguishable. Changed to a dark border (`border-black/20`) across all views: Inventory, Archives, Assign Spool, Configure AMS Slot, Calendar, Projects, Filament Trends, Local Profiles, Link Spool, and Spoolman Settings. Reported by user.
- **Camera Window Overlapping Modals** ([#738](https://github.com/maziggy/bambuddy/issues/738)) — Floating camera viewer rendered on top of modals (e.g. Assign Spool), making them unusable. Lowered camera z-index so modals always appear above it. Reported by @maziggy.
- **Print Complete Notification Not Firing** ([#736](https://github.com/maziggy/bambuddy/issues/736)) — Print complete notifications could silently fail if the finish photo capture hung or timed out, because the notification was chained behind the photo task with no timeout. Added a 45-second timeout so notifications always send even if photo capture stalls. Also added diagnostic logging for MQTT state detection to trace completion triggers. Reported by @piatho.
- **Webhook Notifications Missing Camera Snapshot** ([#679](https://github.com/maziggy/bambuddy/issues/679)) — Webhook notification providers did not include camera snapshots (e.g. from First Layer Complete notifications), even though providers like Telegram, Pushover, ntfy, and Discord already attached them. The webhook payload now includes a base64-encoded `image` field when a snapshot is available (generic format only, not Slack format). Reported by @Arn0uDz.
- **Mobile Sidebar Not Scrollable** — On mobile devices with many navigation items, the sidebar did not scroll, making bottom items unreachable. Added overflow scrolling to the nav section while keeping the logo and footer pinned.
- **User Notification Ruff/Lint Fixes** ([#693](https://github.com/maziggy/bambuddy/pull/693)) — Fixed missing `timezone` import in email timestamp, unused lambda argument, PEP 8 blank line spacing for `mark_printer_stopped_by_user`, and SQLAlchemy forward reference in `UserEmailPreference` model.
- **Carbon Rod Lubrication Maintenance Task Incorrect** ([#755](https://github.com/maziggy/bambuddy/issues/755)) — X1/P1 series printers showed a "Lubricate Carbon Rods" maintenance task, but carbon rods use plain bearings and should never be lubricated — doing so degrades print quality. Removed the lubrication task; only "Clean Carbon Rods" remains. Existing "Lubricate Carbon Rods" entries are automatically removed on next startup. Reported by @RosdasHH.
- **Ntfy Notifications Fail With Non-ASCII Characters** ([#742](https://github.com/maziggy/bambuddy/issues/742)) — Ntfy notifications with camera snapshots failed when the printer name or filename contained non-ASCII characters (e.g. accented letters, CJK). The `Title` and `Message` HTTP headers were passed as Python strings, causing httpx to reject them with `UnicodeEncodeError`. Fixed by encoding header values as UTF-8 bytes, which ntfy handles correctly. Test notifications were unaffected because they use a hardcoded ASCII title and no image attachment. Reported by @user.
- **Virtual Printer Proxy Mode Printing Fails on Isolated Networks** ([#757](https://github.com/maziggy/bambuddy/issues/757)) — When the slicer and printer are on different VLANs/subnets, Bambu Studio could not send prints through the virtual printer proxy because: (1) the printer's real IP leaked through MQTT payloads (`rtsp_url`, `net.info[].ip`), causing BS to bypass the proxy; (2) the bind/detect protocol (port 3000/3002) was forwarded to the real printer, leaking its identity and name; (3) the file transfer tunnel (port 6000) used by BS for verify_job and uploads was not proxied; (4) FTP data connections for zero-byte uploads (verify_job) failed due to a TLS handshake race condition. Fixed by: rewriting IP addresses in MQTT PUBLISH payloads (both string and integer formats) with proper MQTT framing preservation, responding to bind/detect with the VP's own identity via BindServer, adding transparent TCP proxies for port 6000 (file transfer) and port 322 (RTSP camera), buffering slicer data during FTP data proxy connection setup, and advertising the configured VP name in SSDP. Also added cross-subnet SSDP support via a wildcard listener for VPN/multi-subnet setups. Reported by @Utility9298.
- **Virtual Printer Proxy Mode X1C/X1 Print Upload Fails** ([#757](https://github.com/maziggy/bambuddy/issues/757)) — X1C and X1 printers failed to upload prints through proxy mode. After FTP verify_job succeeded (226), BambuStudio's closed-source `bambu_networking` DLL silently refused to proceed with the actual 3MF upload, showing a login modal instead. Root cause: the DLL validates the TLS connection parameters and rejects connections where the certificate doesn't match the printer's real BBL CA certificate. The TLS-terminating proxy presented Bambuddy's own "Virtual Printer CA" certificate, which the DLL rejected. Fixed by switching to transparent TCP proxying for FTP (port 990), FileTransfer (port 6000), Camera (port 322), and FTP passive data (ports 50000–50100) — raw bytes are forwarded without TLS termination, so the slicer gets end-to-end TLS directly with the printer's real certificate. Only MQTT (port 8883) remains TLS-terminated, which is required to rewrite the printer's real IP with the proxy's bind IP in MQTT payloads. Confirmed working on both H2D and X1C printers.
- **UserEmailPreference Model Not Registered** — The `UserEmailPreference` SQLAlchemy model was not imported in `models/__init__.py`, causing mapper initialization failures when the `User` model's relationship resolved the string reference before the model class was registered with Base metadata.
- **Native Install Missing CAP_NET_BIND_SERVICE** — The `install.sh` systemd service template was missing `AmbientCapabilities=CAP_NET_BIND_SERVICE`, causing Virtual Printer proxy mode to silently fail to bind privileged ports (322, 990) on native installations.
- **Virtual Printer Proxy A1 Diagnostics** ([#757](https://github.com/maziggy/bambuddy/issues/757)) — Added diagnostic port probing (ports 21, 80, 443) on proxy VP bind IPs to detect if BambuStudio tries to connect on ports the proxy doesn't handle. Logs a warning when an unexpected connection is detected. Helps diagnose A1/A1 Mini proxy issues where the slicer may use a different connection flow.
- **File Rename Removes Extension** ([#751](https://github.com/maziggy/bambuddy/issues/751)) — Renaming a file in the File Manager included the file extension in the editable text, so users could accidentally remove it (e.g. renaming `bracket.gcode.3mf` to `bracket`), making the file unprintable. The rename modal now only lets users edit the base name, with the extension shown as a non-editable suffix. Reported by @fleishmaab, confirmed by @cadtoolbox.
- **Spurious "Job Waiting for Filament" Notification** ([#753](https://github.com/maziggy/bambuddy/issues/753)) — When all printers of a model were busy and a job was queued with ASAP timing, a "Job Waiting for Filament" notification fired immediately even though no filament issue existed. The job was simply waiting for a printer to finish. The scheduler now skips the waiting notification when all matching printers are just busy, since the job will auto-start when one finishes. Also renamed the default notification title from "Job Waiting for Filament" to "Queue Job Waiting" to accurately reflect all waiting reasons. Reported by @maziggy.
- **AMS Spools Removed After Printer Restart** ([#765](https://github.com/maziggy/bambuddy/issues/765)) — AMS spool assignments and slot configurations were lost after restarting the printer. When the printer shuts down, it sends a final MQTT message with `tray_exist_bits=0` and `power_on_flag=false`, which caused Bambuddy to clear all AMS slot data and auto-unlink every spool assignment. On reconnect, the assignments were gone. Fixed by skipping `tray_exist_bits` slot clearing when `power_on_flag` is `false` (shutdown message), preserving AMS data across printer restarts. Reported by @Woyteck1.

### Community Contributions
- **Admin Set Default Nav-Menu Order** ([#761](https://github.com/maziggy/bambuddy/pull/761)) — Admins with authentication enabled can now set their current sidebar menu order as the default for new users. New users inherit this layout on first login and can customize it afterward. Contributed by @cadtoolbox.
- **Improve Home Assistant Notifications** ([#750](https://github.com/maziggy/bambuddy/pull/750)) — Added support for Home Assistant `notify` services in addition to the existing REST-based integration. Contributed by @mrtncode.
- **Add Total Cost to Projects** ([#733](https://github.com/maziggy/bambuddy/pull/733)) — The Projects page now shows a total cost that sums material, energy, and BOM costs. Contributed by @Keybored02.
- **Material Mismatch & Insufficient Filament Checks** ([#720](https://github.com/maziggy/bambuddy/pull/720)) — When assigning non-Bambu Lab spools, a warning prompts if the filament type or profile doesn't match. Pre-print checks now also warn when the spool has insufficient material. Both warnings are dismissible, with a toggle in Settings. Contributed by @Keybored02.
- **Send Bambu RFID Tags to Spoolman & Manual Mode Unlink** ([#719](https://github.com/maziggy/bambuddy/pull/719)) — Bambu Lab spool RFID identifiers (tray UUID) are now sent to Spoolman instead of generic placeholder tags. An "Unlink" button appears on Bambu spools when Spoolman is in manual sync mode. Fixed location clearing for generic spools during sync. Contributed by @shrunbr.
- **Rework Archive Duplicates Tagging** ([#718](https://github.com/maziggy/bambuddy/pull/718)) — Duplicate detection now requires both matching filename and SHA256 hash. The tag shows reprint count instead of "Duplicate" text, links back to the parent print, and a new "Hide Duplicates" filter is available. Contributed by @Keybored02.

### Added
- **Quick Print Speed Control** ([#256](https://github.com/maziggy/bambuddy/issues/256)) — Added a print speed control badge to the printer card controls row, next to the fan status badges. Click to choose between Silent (50%), Standard (100%), Sport (124%), and Ludicrous (166%) speed presets. The badge shows the current speed percentage with a gauge icon, always visible but disabled when no print is active. Includes optimistic UI updates for instant feedback. Requested by @Sllepper.
- **Spool Rotation During AMS Drying** — Added a "Rotate spool during drying" checkbox to the manual drying popover for AMS 2 Pro and AMS-HT units. Rotates the spool for more even heat distribution. Off by default; resets when opening the popover for a different AMS unit. The firmware silently disables rotation if filament is currently loaded from the unit.
- **Spool Name Column & Filter in Filament Inventory** ([#740](https://github.com/maziggy/bambuddy/issues/740)) — Added a "Spool" column to the filament inventory table that displays the spool catalog entry name (e.g. "Bambu Lab AMS Tray", "Sunlu 1kg"). Enable it via the column visibility menu. Sortable and hidden by default. Also added a spool name filter dropdown next to the brand filter for quick filtering by spool type. Requested by @DMoenning.

### Changed
- **Redesigned Bug Report Debug Log Flow** — Replaced the fixed 30-second debug log collection with an interactive 3-step flow: start debug logging, reproduce the issue at your own pace, then stop & submit. An elapsed timer shows recording duration with auto-stop at 5 minutes. Users now have full control over when to capture logs instead of racing a countdown. The backend splits log collection into separate start/stop endpoints, and the frontend shows a step progress indicator with pulsing active state.

### Improved
- **HMS Error Visibility on Printers Page** ([#772](https://github.com/maziggy/bambuddy/issues/772)) — Improved visibility of printers with HMS errors for large print farms. Added a red "Problem" counter to the status summary bar showing how many connected printers have active HMS errors. The compact-mode status pip (colored dot) now turns red for fatal/serious errors (severity ≤ 2) or amber for common warnings, instead of only showing connection status. Progress bars turn amber when a print is paused. Sorting by status now places printers with HMS errors at the top, above printing and idle printers. Requested by @jimmy-brightz.
- **Print Command Response Verification** ([#737](https://github.com/maziggy/bambuddy/issues/737)) — After sending a print command, BambuBuddy now monitors whether the printer's state changes within 15 seconds. If the printer silently ignores the command (observed on some P1S firmware versions where the MQTT command handler becomes unresponsive), a warning is logged for diagnostics. This aids debugging when users report prints not starting despite BambuBuddy showing success.
- **Compact Assign Spool Modal** ([#725](https://github.com/maziggy/bambuddy/issues/725)) — The "Assign Spool" modal now uses a compact 3-column grid layout instead of a vertical list, showing more spools at once without scrolling. Each card displays the spool name, color, and remaining/total weight. The modal is wider with a taller scroll area. Requested by @RosdasHH.
- **Reformatted AMS Drying Presets Table** ([#732](https://github.com/maziggy/bambuddy/issues/732)) — The drying presets table in Settings now groups columns by AMS type (AMS 2 Pro, AMS-HT) with inline °C and h unit labels next to each input, replacing the previous flat column layout. Requested by @cadtoolbox.

### Security
- **Bump pyOpenSSL 25.3.0 → 26.0.0** — Fixes CVE-2026-27448 (exception swallowing in TLS servername callback) and CVE-2026-27459 (buffer overflow in DTLS cookie callback).
- **Bump pyasn1 0.6.2 → 0.6.3** — Fixes CVE-2026-30922 (stack overflow from deeply nested ASN.1 structures).
- **Bump flatted 3.4.1 → 3.4.2** — Fixes GHSA-rf6f-7fwh-wjgh (prototype pollution via `parse()`). Dev-only dependency (eslint).

## [0.2.2] - 2026-03-16

### New Features
- **First Layer Complete Notification** ([#679](https://github.com/maziggy/bambuddy/issues/679)) — Get notified with a camera snapshot when the first layer finishes printing, so you can check adhesion remotely without watching the whole print. Enable the "First Layer Complete" toggle on any notification provider. Fires once per print when layer 2 begins (confirming layer 1 is done), with a guard against spurious triggers on printer reconnect. Requested by community.
- **Remote AMS Drying** ([#292](https://github.com/maziggy/bambuddy/issues/292)) — Start, monitor, and stop drying sessions for AMS 2 Pro and AMS-HT directly from the Printers page. A flame icon appears on supported AMS cards; clicking it opens a popover to select filament type (PLA, PETG, TPU, ABS, ASA, PA, PC, PVA) with official BambuStudio temperature/duration presets, or set temperature manually. When drying is active, a status bar shows the time remaining with a live countdown and stop button. Supported on X1/X1C (fw 01.09+), P1P/P1S (fw 01.08+), H2D (fw 01.02.30+), H2D Pro, and X1E. Not supported on P2S, A1, A1 Mini, H2S, or H2C. Requires `printers:control` permission when authentication is enabled.
- **Queue Auto-Drying** ([#292](https://github.com/maziggy/bambuddy/issues/292)) — Automatically dry filament between scheduled queue prints. When enabled in Settings → Print Queue, the scheduler starts drying on idle printers that have upcoming scheduled prints and whose AMS humidity exceeds the configured threshold. Uses conservative parameters (lowest temperature, longest duration) when mixed filament types are loaded. Drying stops automatically when humidity drops below threshold (with a 30-minute minimum to prevent oscillation), when scheduled items are removed, or when the feature is disabled. Optional "block queue" mode delays the next print until drying completes.
- **Configurable Drying Presets** ([#292](https://github.com/maziggy/bambuddy/issues/292)) — Customize temperature and duration for each filament type in Settings → Print Queue. Defaults match BambuStudio presets (PLA 55°C/8h, PETG 65°C/8h, etc.) and are used by both the manual drying popover and queue auto-drying. AMS 2 Pro and AMS-HT use separate presets reflecting their different heating capabilities.
- **AMS PSU Detection** ([#292](https://github.com/maziggy/bambuddy/issues/292)) — The drying button is disabled with a tooltip when the AMS lacks sufficient power for drying (e.g. not connected to the external PSU). Reads `dry_sf_reason` from printer firmware and surfaces HMS error codes for AMS 2 Pro and AMS-HT power issues.
- **Ambient Drying** ([#292](https://github.com/maziggy/bambuddy/issues/292)) — Automatically keep filament dry on idle printers based on humidity, even without queued prints. Enable "Ambient drying" in Settings → Print Queue to have the scheduler start drying on any idle printer whose AMS humidity exceeds the configured threshold — no scheduled prints required. Uses the same humidity threshold, drying presets, and power constraint detection as queue auto-drying. Both modes can be enabled simultaneously. Requested by community.
- **Assign Spool to Empty AMS Slot** ([#717](https://github.com/maziggy/bambuddy/issues/717)) — Previously, the "Assign Spool" button only appeared on AMS slots that already had a filament profile configured, requiring users to first configure the slot manually before assigning an inventory spool — even though the assignment auto-configures the slot anyway. The "Assign Spool" option now appears on empty (unconfigured) slots as well. Selecting a spool auto-configures the slot with the correct filament profile, color, and K-profile in one step. Also fixed the AMS slot profile label showing the generic material type (e.g. "PLA") instead of the spool's actual slicer preset name (e.g. "PolyLite PLA Pro") after assignment. Requested by @RosdasHH.
- **Home Assistant Notification Provider** ([#656](https://github.com/maziggy/bambuddy/issues/656)) — Added Home Assistant as a notification provider. When HA is configured in Settings → Network → Home Assistant, selecting "Home Assistant" as a notification provider sends persistent notifications to the HA dashboard — no additional configuration needed. From there, HA automations can forward notifications to mobile apps, WhatsApp, or any other service. Requested by @TravisWilder.
- **Virtual Printer Queue Auto-Dispatch Toggle** ([#587](https://github.com/maziggy/bambuddy/issues/587)) — Added an "Auto-dispatch" toggle to virtual printers in Queue mode. When enabled (default), prints sent from the slicer are added to the queue and start automatically on the assigned printer — matching the current behavior. When disabled, prints are added to the queue with `manual_start` set, so they wait for manual dispatch. This allows users who want to review and manually assign prints before they start. Requested by @Percy2Live.
- **Queue All Plates** ([#530](https://github.com/maziggy/bambuddy/issues/530)) — Multi-plate 3MF files can now be queued in one action. When adding a multi-plate file to the queue, a "Queue All N Plates" toggle appears in the plate selector. When activated, every plate is added as a separate queue entry (one per plate × per selected printer), each individually editable from the queue page. The toggle is only available in add-to-queue mode (not reprint or edit). Requested by @Dendrowen.
- **Malaysian Ringgit Currency** ([#634](https://github.com/maziggy/bambuddy/issues/634)) — Added MYR (RM) to the list of supported currencies for filament cost tracking. Requested by @cynogen127.
- **ETA Variable in Notifications** ([#638](https://github.com/maziggy/bambuddy/issues/638)) — Added `{eta}` template variable to print start, print progress, and queue job started notifications. Shows the estimated wall-clock completion time (e.g. "15:53" or "3:53 PM") based on the user's configured time format (12h/24h). Existing `{estimated_time}` still shows duration ("1h 23m"). Requested by @SebSeifert.
- **Bulk Delete Spool and Color Catalog Entries** ([#646](https://github.com/maziggy/bambuddy/issues/646)) — Added checkbox selection and bulk delete to both the Spool Catalog and Color Catalog in Settings > Filament. Select individual entries with checkboxes, use the header checkbox to select/deselect all visible entries, then click "Delete Selected" to remove them in one operation. Previously, entries could only be deleted one at a time. Requested by @SebSeifert.
- **Force Color Match** ([#625](https://github.com/maziggy/bambuddy/pull/625)) — Added a "Force Color Match" option for "Print to Any" queue scheduling. When enabled, the scheduler requires a strict color match when assigning prints to printers, preventing incorrect filament assignments when multiple candidates are close in color. Prints wait in the queue until a printer with the exact matching filament is available. Contributed by @cadtoolbox.
- **Israeli New Shekel Currency** — Added ILS (₪) to the list of supported currencies for filament cost tracking.
- **AMS Info Card & Custom Labels** ([#570](https://github.com/maziggy/bambuddy/pull/570)) — Hovering an AMS label (e.g. "AMS-A") on the Printers page now shows a popover with serial number, firmware version, and an editable friendly name. Custom labels are stored by AMS serial number so they persist when the unit is moved to a different printer. Slot numbers are now displayed inside each filament color circle with auto-inverted contrast for readability. Labels also appear in the Inventory page's location column. Contributed by @cadtoolbox.
- **In-App Bug Reporting** — A floating bug report button in the bottom-right corner lets users submit bug reports directly from the Bambuddy UI. Reports include a description, optional screenshot (upload, paste, or drag & drop with automatic JPEG compression), optional contact email, and automatically collected diagnostic data. On submit, the system temporarily enables debug logging, sends push_all to all connected printers, waits 30 seconds to collect fresh logs, then submits everything to a secure relay on bambuddy.cool which creates a GitHub issue with sanitized logs uploaded as a separate file. All sensitive data (printer names, serial numbers, IPs, credentials, email addresses) is redacted from logs before submission. The expandable data privacy notice details exactly what is and isn't collected. Translated into all 7 supported languages.
- **SpoolBuddy NFC Tag Writing (OpenTag3D)** — SpoolBuddy can now write NFC tags for third-party filament spools using the OpenTag3D format on NTAG213/215/216 stickers. A new "Write" page (`/spoolbuddy/write-tag`) in the kiosk UI provides three workflows: write a tag for an existing inventory spool (no tag linked yet), create a new spool and write in one flow, or replace a damaged tag (unlinks old, writes new). The left panel shows a searchable spool list or a compact creation form (material dropdown, color picker, brand, weight); the right panel shows real-time NFC status with tag detection, a spool summary, and the write button. The backend encodes spool data as a 133-byte OpenTag3D NDEF message (MIME type `application/opentag3d`, fits NTAG213's 144-byte capacity) containing material, color, brand, weight, temperature, and RGBA color data. The write command flows through the existing heartbeat polling mechanism — the frontend queues a write, the daemon picks it up on the next heartbeat, writes page-by-page with read-back verification via the PN5180's NTAG WRITE (0xA2) command, and reports success/failure via WebSocket. On success the tag UID is automatically linked to the spool with `data_origin=opentag3d`. Written tags are readable by any OpenTag3D-compatible reader including SpoolBuddy itself. Translations added for all 6 languages.
- **SpoolBuddy On-Screen Keyboard** — Added a virtual QWERTY keyboard for the SpoolBuddy kiosk UI (and login page) since the Raspberry Pi has no physical keyboard and system-level virtual keyboards (squeekboard, wvkbd) don't auto-show/hide in the labwc/Chromium kiosk environment. Uses `react-simple-keyboard` with a dark theme matching the bambu-dark/bambu-green palette. Auto-shows when any text/password/email input is focused, supports shift, caps lock, backspace, and email-friendly keys (@, .). Inputs with `data-vkb="false"` are excluded (e.g. SpoolBuddySettingsPage's own numpad). A two-phase close prevents ghost-click passthrough to elements underneath the keyboard.
- **SpoolBuddy Inline Spool Cards** — Placing an NFC-tagged spool on the SpoolBuddy reader now shows spool info directly in the dashboard's right panel instead of a separate modal overlay. Known spools display a SpoolIcon with color/brand/material, a large remaining-weight readout with fill bar, and a weight comparison grid, with action buttons for "Assign to AMS", "Sync Weight", and "Close". Unknown tags show the tag UID, scale weight, and offer "Add to Inventory" or "Link to Spool" actions. The card stays visible if the tag is removed (for continued interaction) and won't re-appear for the same tag after dismissal — but re-placing a tag after removal shows it again. The idle spool animation displays when no tag is detected.
- **SpoolBuddy AMS Page: External Slots & Slot Configuration** — The SpoolBuddy AMS page (`/spoolbuddy/ams`) now displays external spool slots (single nozzle: "Ext", dual nozzle: "Ext-L"/"Ext-R") and AMS-HT units in a compact horizontal row below the regular AMS grid, fitting within the 1024×600 kiosk display without scrolling. Clicking any AMS, AMS-HT, or external slot opens the `ConfigureAmsSlotModal` to configure filament type and color — the same modal used on the main Printers page. Dual-nozzle printers show L/R nozzle badges on each AMS unit. Temperature and humidity are displayed with threshold-colored SVG icons (green/gold/red) matching the Bambu Lab style on the main printer cards, using the configured AMS humidity and temperature thresholds from settings.
- **SpoolBuddy Dashboard Redesign** — Redesigned the SpoolBuddy dashboard with a two-column layout: left column shows device connection status (scale and NFC with state-colored icons — green when device is online, gray when offline) and printer status badges below (compact pills with green/gray dots for online/offline, wrapping to fit without scrolling); right column shows the current spool card. Cards use a dashed border style for a cleaner look. The large weight display card was removed in favor of the inline scale reading in the device card. Unknown NFC tags now offer a quick-add modal that creates a basic PLA spool entry linked to the tag — with a hint recommending users add spools via the main Bambuddy UI first for full details. The separate SpoolBuddy inventory page was removed since inventory management belongs in the main Bambuddy frontend; the bottom nav now has three tabs (Dashboard, AMS, Settings).
- **SpoolBuddy Kiosk Auth Bypass via API Key** — When Bambuddy auth is enabled, the SpoolBuddy kiosk (Chromium on RPi) was redirected to the login page because the `ProtectedRoute` requires a user object from `GET /auth/me`, which only accepted JWT tokens. The `/auth/me` endpoint now also accepts API keys (via `Authorization: Bearer bb_xxx` or `X-API-Key` header) and returns a synthetic admin user with all permissions. The frontend's `AuthContext` reads an optional `?token=` URL parameter on first load, stores it in localStorage, and strips it from the URL to prevent leakage via browser history or referrer. The install script now includes the API key in the kiosk URL (`/spoolbuddy?token=${API_KEY}`), so the device authenticates automatically on boot without manual login.
- **Daily Beta Builds** — Added a release script (`docker-publish-daily-beta.sh`) that reads the current `APP_VERSION` from config, builds a multi-arch Docker image, pushes to both GHCR and Docker Hub, and creates/updates a GitHub prerelease with changelog notes. Daily builds overwrite the same beta version tag (e.g., `0.2.2b1`) — users pull the latest by re-pulling the tag or using Watchtower. Beta images are never tagged as `latest`. Fixed auto-generated "Contributors" section appearing in GitHub release notes by stripping `@mentions` from changelog text before creating the release.
- **Inventory Scale Weight Check Column** — Added a "Weight Check" column (hidden by default) to the inventory table that compares each spool's last scale measurement against its calculated gross weight (net remaining + core weight). Spools within a ±50g tolerance show a green checkmark; mismatched spools show a yellow warning with the difference and a sync button that trusts the scale reading and resets weight tracking. The backend stores `last_scale_weight` and `last_weighed_at` on each spool whenever weight is synced via SpoolBuddy, and the column tooltip shows scale weight, calculated weight, and difference. Edge case: when scale weight is below core weight (empty spool or not on scale), the comparison treats it as a match since sync can't correct this.

### Fixed
- **Library Upload Doesn't Show New File Until Page Reload** ([#704](https://github.com/maziggy/bambuddy/issues/704)) — After uploading a file in the Library file manager, the file list didn't update until the user reloaded the browser. The upload endpoint used `db.flush()` instead of `db.commit()`, so the new row was only written to the database *after* the response was sent to the client. The frontend immediately refetched the file list upon receiving the response, but a new database session couldn't see the uncommitted row — resulting in stale data. Fixed by committing before the response is returned. Also fixed the same race condition in folder create, folder update, and file update endpoints. Reported by @shadowjig.
- **Printer File Manager Doesn't Auto-Refresh** ([#704](https://github.com/maziggy/bambuddy/issues/704)) — The printer file manager (SD card browser) only fetched the file list once when opened. Files uploaded from BambuStudio/OrcaSlicer while the modal was open wouldn't appear until the user clicked the refresh button or reopened the modal. Now auto-refreshes every 30 seconds while open. Reported by @shadowjig.
- **Database Connection Pool Exhaustion Under Load** ([#704](https://github.com/maziggy/bambuddy/issues/704)) — Background tasks (print scheduler FTP uploads, camera captures, notification sends, timelapse stitching) held database sessions open during slow network I/O, consuming connection pool slots for seconds at a time. With the default pool of 15 connections (size 5 + overflow 10), concurrent operations during print start/complete events could exhaust the pool, causing `QueuePool limit reached` errors and `greenlet_spawn` failures in RFID spool auto-assignment. Doubled the pool to 30 connections (size 10 + overflow 20). Reported by @shadowjig.
- **Block Mode Skips Humidity Auto-Stop** ([#292](https://github.com/maziggy/bambuddy/issues/292)) — When "Wait for drying to complete" was enabled and a printer had pending queue items, the scheduler skipped the humidity auto-stop check entirely. A drying session that reached its humidity target would continue indefinitely instead of stopping after the 30-minute minimum. Now, block mode only prevents starting new drying — already-drying printers still have their humidity checked and stopped when the threshold is met.
- **AMS Fill Level Shows 0% for Non-Viewer Users** ([#676](https://github.com/maziggy/bambuddy/issues/676)) — When authentication was enabled with advanced permissions, users with `inventory:view_assignments` permission saw 0% fill level on AMS slots where inventory spool data had stale `weight_used` values. The fill level fallback chain (Spoolman → Inventory → AMS remain) used nullish coalescing (`??`), which doesn't fall through on `0` — so a stale inventory fill of 0% permanently shadowed the correct real-time AMS remain value from the printer. Now, when inventory says 0% but the AMS hardware reports a positive remain, the inventory value is bypassed in favor of the live AMS data. Viewer users were unaffected because their group lacked `inventory:view_assignments`, so the inventory query never fired and the AMS remain was used directly. Reported by @cadtoolbox.
- **Virtual Printer Proxy Mode Always Shows X1C Model** — Creating a virtual printer in Proxy mode always set the model to X1C regardless of the destination printer, because the frontend hides the model dropdown in proxy mode and the backend defaulted to X1C. Now auto-inherits the model from the target printer when creating or updating a proxy virtual printer (e.g. a proxy pointing at a P1S correctly presents itself as P1S to the slicer). The model also auto-updates when changing the target printer or switching to proxy mode.
- **Cloud Profiles Shared Across All Users** ([#665](https://github.com/maziggy/bambuddy/issues/665)) — When authentication was enabled, Bambu Cloud credentials were stored globally — one account per Bambuddy instance. If User A logged into Cloud, every other user saw User A's account and profiles. User B logging in would overwrite User A's credentials. Cloud credentials are now stored per-user: each user logs into their own Bambu Cloud account independently. When auth is disabled (single-user mode), behavior is unchanged. Also fixed cloud data endpoints (`/cloud/settings`, `/cloud/fields`, preset CRUD) requiring `settings:read` / `settings:update` permissions instead of `cloud:auth` — users who had "Cloud Auth" enabled but "Settings" disabled couldn't load profiles after logging in. Reported by @cadtoolbox.
- **Local Profiles Not Shown in AMS Slot Configuration** — Imported local filament profiles were hidden in the AMS slot configure modal when a printer model was set. The `compatible_printers` filter parsed the stored JSON array as a semicolon-delimited string, so the matching always failed and every local preset was silently skipped. Removed the filter entirely — user-imported profiles should be available on any printer.
- **Interface Aliases Not Shown in Virtual Printer Interface Select** — Interface aliases (e.g. `eth0:1`) added for multi-virtual-printer setups were invisible in the bind IP dropdown. The Docker image didn't include `iproute2`, so the `ip` command wasn't available and the code fell back to ioctl-based enumeration which can only return one IP per interface. Added `iproute2` to the Docker image.
- **P2S Camera Stream Disconnects After a Few Seconds** ([#661](https://github.com/maziggy/bambuddy/issues/661)) — The P2S firmware drops RTSP sessions after a few seconds with an I/O error. Root cause: ffmpeg in the Docker image uses GnuTLS for TLS, and Debian's hardened GnuTLS defaults reject TLS behaviors (renegotiation, legacy ciphers) that some printer firmwares rely on. Added a local TLS termination proxy that uses Python's ssl module (OpenSSL) to handle the TLS connection to the printer, exposing a plain RTSP port to ffmpeg. The proxy rewrites RTSP request-line URLs while preserving Digest auth headers. Also reduced RTSP reconnect delay from 1.0s to 0.2s, added ffmpeg fast-start flags for lower startup latency, and fixed external camera streams being choppy due to double rate-limiting in the proxy layer. Reported by @ddetton, confirmed by @DMoenning.
- **iOS/iPadOS Cannot Reposition Floating Camera** ([#687](https://github.com/maziggy/bambuddy/issues/687)) — The floating camera viewer (embedded camera window on the dashboard) could not be dragged or resized on iOS/iPadOS because it only handled mouse events. Touch input scrolled the page underneath instead of moving the camera window. Added touch event support (`touchstart`/`touchmove`/`touchend`) to both the header drag handle and the resize handle, with `preventDefault` to stop page scrolling during drag. Reported by @dsmitty166.
- **PA-CF / PA12-CF / PAHT-CF Not Treated as Compatible** ([#688](https://github.com/maziggy/bambuddy/issues/688)) — Bambu Lab firmware treats PA-CF, PA12-CF, and PAHT-CF as interchangeable, but the print scheduler and filament override UI used exact string matching. If a 3MF required PA-CF but the AMS had PA12-CF loaded, the scheduler wouldn't assign the job and the filament override dropdown was empty/disabled. Added a filament type equivalence system so these PA variants are treated as compatible in scheduler assignment, AMS slot matching, force color match validation, and the filament override dropdown. Reported by @aneopsy.
- **Force Color Match Toggle Click Target Too Large** ([#688](https://github.com/maziggy/bambuddy/issues/688)) — In the Schedule Print modal, clicking anywhere on the "Force color match" row toggled the checkbox, not just the checkbox and its label. The click target now covers only the checkbox, icon, and label text. Reported by @aneopsy.
- **HA Switch Badge Always Sends Turn On Instead of Toggle** — Clicking a non-script Home Assistant entity (switch, light, input_boolean) on the printer card always sent `turn_on`, which is a no-op when the switch is already on. Now sends `toggle` for non-script entities so the badge click actually toggles the switch state. Script entities still use `turn_on` (stateless trigger).
- **Multiple Plugs Per Printer Crashes Auto-On/Off** — When multiple smart plugs were assigned to the same printer (e.g., a Tasmota plug + an HA switch), the auto-on/auto-off handler called `scalar_one_or_none()` which raises `MultipleResultsFound`. Now fetches all plugs and returns the main (non-script) power plug, matching the API route behavior.
- **Multiple HA Switches Per Printer UNIQUE Constraint** — The migration that removes the UNIQUE constraint on `smart_plugs.printer_id` (to allow multiple HA switches per printer) used an exact string match to detect the constraint in the SQLite schema. Databases created with older SQLAlchemy versions expressed the constraint differently (e.g. quoted column names, table-level `UNIQUE(printer_id)`, or separate indexes), so the migration silently skipped them. Users hit `IntegrityError: UNIQUE constraint failed` when assigning a second HA switch to a printer. Now uses regex pattern matching and also checks for standalone UNIQUE indexes.
- **HMS Notifications for Unknown/Phantom Error Codes** — Printers send many undocumented or phantom HMS error codes that don't correspond to real errors (e.g. calibration status codes after firmware updates). These triggered email/push notifications even though the printer card correctly filtered them out. Flipped the notification logic from "notify all, suppress specific codes" to "only notify for errors with known descriptions", matching the frontend behavior. Also fixed the log message reporting incorrect notification counts.
- **Ethernet Badge Shown on WiFi Printers / MQTT Disconnecting** ([#585](https://github.com/maziggy/bambuddy/issues/585)) — Three bugs in the ethernet badge feature: (1) `home_flag` bit 18 is set on all printers regardless of connection type, so every ethernet-capable model showed the ethernet badge even when connected via WiFi. Replaced bit 18 detection with wifi_signal-based heuristic: printers on ethernet with WiFi disabled report a hardcoded `-90 dBm` sentinel, while real WiFi signals vary. (2) The lazy import used `from app.utils.printer_models` which crashes with `ModuleNotFoundError` in paho-mqtt's background thread (correct path is `backend.app.utils.printer_models`). This killed the MQTT thread entirely, causing all printers to go stale after 60s and repeatedly disconnect/reconnect. (3) WiFi-only models (A1, P1P, etc.) that don't have an ethernet port are excluded via model-based gating. Reported by @cadtoolbox.
- **Inventory Usage Tracker Missing External Spool Mapping** ([#677](https://github.com/maziggy/bambuddy/issues/677)) — When all higher-priority slot-to-tray mapping methods failed (MQTT mapping, print command mapping, queue mapping, color matching), the internal inventory usage tracker fell back to `slot_id - 1` which can never reach external spool IDs (254/255) or AMS-HT IDs (128+). Added position-based resolution using sorted available tray IDs from the printer's AMS state, matching the fix applied to Spoolman tracking in #686. Contributed by @shrunbr.
- **Spool Assignment Applies Wrong Filament Profile** ([#681](https://github.com/maziggy/bambuddy/issues/681)) — Assigning a spool with a specific filament variant (e.g. "Generic PLA Silk") to an AMS slot applied the base profile instead (e.g. "Generic PLA"). The Bambu Cloud API returns only the base `filament_id` for versioned setting IDs (`GFSL99` → `GFL99`), ignoring variant suffixes (`GFSL99_01`). Added a cross-check that compares the resolved filament name against the spool's stored preset name and corrects the filament ID via reverse lookup when they don't match (e.g. `GFL99` → `GFL96` for "Generic PLA Silk"). Also fixed the UI showing a stale preset name (e.g. "Bambu PLA Matte" instead of "Bambu PLA Silk") after assignment — the slot preset mapping was only saved when assigning via SpoolBuddy, not via the PrintersPage hover card. The backend now saves the slot preset mapping using the spool's authoritative `slicer_filament_name` after every successful MQTT configuration, regardless of which UI path triggered the assignment. Reported by @peter-k-de, @RosdasHH.
- **Debug Logging Endpoint 500 Error** — The `GET /api/v1/support/debug-logging` endpoint returned a 500 Internal Server Error when the database contained a timezone-aware timestamp written by a previous version. The duration calculation subtracted a timezone-aware datetime from a naive `datetime.now()`, raising `TypeError`. Now strips timezone info when reading the stored timestamp.
- **Bed Cooled Notification Never Fires** ([#497](https://github.com/maziggy/bambuddy/issues/497)) — The bed cooldown monitor always timed out after 30 minutes without sending a notification. After print completion, P1S (and likely other models) sends partial MQTT status updates that don't include `bed_temper`, so the cached bed temperature stayed frozen at the end-of-print value and never dropped below the threshold. The monitor now sends periodic `pushall` commands to the printer to force fresh temperature data. Also added debug logging to the polling loop for future diagnostics.
- **Notification Provider Missing Event Toggles on Create** ([#497](https://github.com/maziggy/bambuddy/issues/497)) — When creating a new notification provider, the `on_bed_cooled` toggle and all 7 queue event toggles (`on_queue_job_added`, `on_queue_job_assigned`, `on_queue_job_started`, `on_queue_job_waiting`, `on_queue_job_skipped`, `on_queue_job_failed`, `on_queue_completed`) were silently discarded. The create endpoint manually listed each field but omitted these 8 toggles, so they always defaulted to `false` regardless of user selection. Editing an existing provider worked correctly.
- **Clear Plate Prompt Shown for Staged Queue Items** — The "Clear Plate & Start Next" button on the printer card appeared when all pending queue items were staged (`manual_start`/Queue Only), even though the scheduler won't auto-start them. The clear plate prompt now only appears when there are auto-dispatchable items that the scheduler will actually start after the plate is cleared.
- **Ethernet Badge Shown on WiFi-Only Printers** ([#585](https://github.com/maziggy/bambuddy/issues/585)) — The printer card network badge always showed "Ethernet" even on printers without an ethernet port. WiFi-only models (A1, P1P, etc.) are now excluded via model-based gating. Reported by @cadtoolbox.
- **GitHub Backup Required Cloud Login** ([#655](https://github.com/maziggy/bambuddy/issues/655)) — The GitHub backup settings card was completely blocked behind Bambu Cloud authentication, showing "Bambu Cloud login required" even though the backup feature works without it (K-profiles and app settings don't need cloud). Removed the cloud auth gate so GitHub backup can be configured and used without Bambu Cloud. The "Cloud Profiles" checkbox is disabled with a hint when not logged in. Reported by @TravisWilder.
- **GitHub Backup Log Timestamps Off by 1 Hour** — Backup log timestamps in the history table were displayed in UTC instead of the user's local timezone. The local `formatDateTime` function didn't use `parseUTCDate`, so timezone-less timestamps from SQLite were interpreted as local time. Now uses the shared `parseUTCDate` utility for correct UTC-to-local conversion.
- **H2D AMS Units Shown on Wrong Nozzle** ([#659](https://github.com/maziggy/bambuddy/issues/659)) — On the H2D dual-nozzle printer, AMS units were displayed on the wrong nozzle (e.g. both AMS-HT and AMS2 Pro shown on the left nozzle instead of their correct assignments). Three interrelated bugs in the AMS `info` field parsing: (1) the field was parsed as decimal instead of hexadecimal (BambuStudio uses `std::stoull(str, nullptr, 16)`), (2) the extruder ID was extracted as a single bit instead of a 4-bit field, and (3) partial MQTT updates overwrote the full extruder map instead of merging. Now correctly hex-parses the `info` field, extracts the 4-bit extruder ID from bits 8-11, skips uninitialized AMS units (`0xE`), and merges partial updates into the existing map. Reported by @cadtoolbox.
- **SD Card Error After FTP Upload** ([#645](https://github.com/maziggy/bambuddy/issues/645)) — After printing one file, subsequent prints could fail with `0500-C010 "MicroSD Card read/write exception"` until Bambuddy was restarted. The FTP upload used `transfercmd()` for A1 compatibility but skipped reading the server's 226 "Transfer complete" response, leaving the SD card file write unconfirmed. The print command was sent via MQTT before the printer's FTP server had finished flushing the file to disk. Now waits for the 226 confirmation after each upload (with a 60-second timeout for slower models like H2D). Reported by @lanfi89, confirmed by @Bademeister89.
- **P2S Shows Carbon Rod Maintenance Tasks** ([#640](https://github.com/maziggy/bambuddy/issues/640)) — The P2S was incorrectly classified as a carbon rod printer, showing "Lubricate Carbon Rods" and "Clean Carbon Rods" maintenance tasks. The P2S uses hardened steel linear shafts, not carbon fiber rods. Added a new `steel_rod` motion system category and "Lubricate Steel Rods" / "Clean Steel Rods" maintenance tasks specific to the P2S. X1/P1 series continue to show carbon rod tasks; A1/H2 series continue to show linear rail tasks. Reported by @maziggy.
- **Dispatch Toast Stuck After Second Print** — The print dispatch progress toast ("Starting prints…") stayed visible forever after the second print dispatch in a session. The dedup guard (`lastDispatchSummaryRef`) that prevents duplicate completion toasts was never reset between batches, so every single-printer dispatch produced the same summary key (`"first-complete:1:0"`). The first print completed normally, but subsequent completions matched the stale ref and skipped creating the done toast — leaving the progress toast stuck in "Processing" state with no way to dismiss except a page reload. Now resets the dedup guard whenever the dispatch toast is dismissed (auto-dismiss timeout, cleanup events) and when a new batch starts.
- **Archive Card Buttons Overlapping at Narrow Widths** ([#641](https://github.com/maziggy/bambuddy/issues/641)) — The "Reprint" and "Schedule" buttons at the bottom of archive cards overlapped when the browser window was narrower than the card grid expected (e.g. snapped to half-screen on a 2K monitor). The button text labels used a viewport-based `sm:` breakpoint that didn't account for actual card width. Added `overflow-hidden` to the flex buttons and `truncate` to the text spans so labels clip cleanly with ellipsis instead of bleeding into adjacent buttons. Reported by rsocko@outlook.com, confirmed by @dsmitty166.
- **Debug Logging Banner Timer Shows Negative Time** — When enabling debug logging, the banner showed a negative duration (e.g. "-60m -59s") equal to the server's UTC offset. The `enabled_at` timestamp was stored using `datetime.now()` (local time, no timezone indicator), but the frontend interpreted it as UTC. Now stores and compares all debug logging timestamps in UTC.
- **Non-Bambu Lab Spools Can't Link/Unlink to Spoolman** ([#653](https://github.com/maziggy/bambuddy/pull/653)) — The "Link to Spoolman" button was not shown for non-Bambu Lab spools (which lack RFID tag UIDs). Now generates a fallback tag from the printer ID, AMS ID, and tray ID for spools without RFID identifiers. Also added an "Unlink from Spoolman" button for non-Bambu spools that are already linked. Contributed by @shrunbr.
- **Spoolman Location Not Updated on Link/Unlink** ([#669](https://github.com/maziggy/bambuddy/pull/669)) — Linking a spool to Spoolman did not set the spool's location field. Now sets the Spoolman location to the printer name, AMS name, and slot number (e.g. "P2S-1 - AMS-A 3") when linking, and clears it when unlinking. Contributed by @shrunbr.
- **Print Dispatch Toast Disappears Instantly on Fast Uploads** ([#615](https://github.com/maziggy/bambuddy/issues/615)) — When sending a print job, the notification popup disappeared instantly for small files or closed immediately when the progress bar reached 100% for larger files, giving no confirmation that the job was submitted. The dispatch toast now stays visible for 3 seconds after completion, showing a success message (e.g. "1 print started successfully") before auto-dismissing. For very fast uploads where the progress toast was never shown, a fresh confirmation toast is created instead. Reported by @aneopsy.
- **Print Modal Shows Busy Printers as Selectable** ([#622](https://github.com/maziggy/bambuddy/issues/622)) — When printing a file from the file manager, the print modal listed all printers including busy ones. Selecting a busy printer resulted in a failed send notification. The printer selector now fetches each printer's live status and shows a state badge (Idle, Printing, Paused, Preparing, Finished, Failed, Offline). In reprint mode, busy printers are grayed out and not selectable. "Select all" also skips busy printers. In queue mode, busy printers remain selectable since the job will wait. Reported by contact@aito3d.fr.
- **PWA Install Not Available in Chrome** ([#629](https://github.com/maziggy/bambuddy/issues/629)) — Chrome did not show the PWA install prompt because the manifest icons had incorrect dimensions (e.g. 190px wide declared as 192px) and the manifest was missing the `screenshots` entries required for Chrome's richer install UI. Resized all three icons (`android-chrome-192x192.png`, `android-chrome-512x512.png`, `apple-touch-icon.png`) to their declared sizes, split the discouraged `"any maskable"` purpose into a dedicated `"maskable"` entry, and added mobile and desktop screenshots to the manifest. Reported by @SebSeifert.
- **Project Statistics Count Archived Files as Printed** ([#630](https://github.com/maziggy/bambuddy/issues/630)) — Files added to a project from the archive were counted in project statistics (completed prints, parts progress) as if they had already been printed. Only files with `status="completed"` (actually printed via a printer) now count toward completion stats. Files with `status="archived"` (stored but not yet printed) are no longer included. Reported by @SebSeifert.
- **Python 3.10 Compatibility** — Bambuddy failed to start on Python 3.10 with `ImportError: cannot import name 'StrEnum' from 'enum'` because `enum.StrEnum` was added in Python 3.11. Added a compatibility shim that falls back to `(str, Enum)` on Python < 3.11, matching the documented requirement of Python 3.10+.
- **Bug Report Bubble Overlapping Toasts** — Moved toast notifications and upload progress up so they stack above the bug report bubble instead of overlapping on top of each other.
- **Virtual Printer: Bind-TLS Proxy Handshake Failure on OpenSSL 3.x** — The TLS proxy connecting to the printer's bind port (3002) failed with `SSLV3_ALERT_HANDSHAKE_FAILURE` on systems with OpenSSL 3.x (e.g. Python 3.12+) because the default cipher set excludes plain RSA key exchange, which is the only mode Bambu printers support. Added `AES256-GCM-SHA384` and `AES128-GCM-SHA256` to the client SSL context's cipher list.
- **Windows: Server Shuts Down After 60 Seconds** ([#605](https://github.com/maziggy/bambuddy/issues/605)) — On Windows, terminating orphaned ffmpeg camera processes broadcast `CTRL_C_EVENT` to the entire process group, causing uvicorn to interpret it as a user-initiated shutdown. ffmpeg is now spawned in its own process group (`CREATE_NEW_PROCESS_GROUP`) so cleanup no longer affects the server. Reported by @Reactantvr.
- **Multi-Printer Filament Mapping Shows Wrong Nozzle Filaments on Dual-Nozzle Printers** ([#624](https://github.com/maziggy/bambuddy/issues/624)) — When selecting multiple printers for a print job on dual-nozzle printers (H2D), the per-printer filament mapping override dropdown showed filaments from both nozzles instead of only the correct nozzle for each slot. The single-printer filament mapping (FilamentMapping.tsx) was fixed in v0.2.1 to filter by `nozzle_id`, but the multi-printer path (InlineMappingEditor in PrinterSelector.tsx) was missed. Both the auto-match logic and the dropdown options now filter by `nozzle_id`, matching the single-printer behavior. Reported by @cadtoolbox.
- **Filament Mapping Dropdowns Missing Subtypes** ([#624](https://github.com/maziggy/bambuddy/issues/624)) — All filament mapping dropdowns (single-printer, multi-printer, and "Print to Any" model-based assignment) showed only the base material type (e.g., "PLA") without the subtype (e.g., "PLA Basic", "PLA Matte"). This made it impossible to distinguish between different filament variants of the same color. Now shows `tray_sub_brands` (e.g., "PLA Basic", "PLA Matte", "PETG HF") in all filament dropdowns, falling back to the base type when no subtype is set. The backend's available-filaments endpoint also includes `tray_sub_brands` in the dedup key, so "PLA Basic Black" and "PLA Matte Black" appear as separate entries instead of collapsing into duplicate "PLA (Black)" rows. Reported by @cadtoolbox.
- **Archive Card Shows "Source" Badge for Sliced .3mf Files** — Archive cards created from prints showed a "SOURCE" badge instead of "GCODE" when the filename was a plain `.3mf` (without `.gcode` in the name). The `isSlicedFile()` check only matched `.gcode` or `.gcode.3mf` extensions, but `.3mf` files can be either sliced (contains gcode) or raw source models. Now checks the archive's `total_layers` and `print_time_seconds` metadata — if either is present, the file is sliced. Also passes the original human-readable filename when creating archives from the file manager print flow (previously stored the UUID library filename).
- **AMS Slot Shows Wrong Material for "Support for" Profiles** — Configuring an AMS slot with a filament profile like "PLA Support for PETG PETG Basic @Bambu Lab H2D 0.4 nozzle" set the slot material to PLA instead of PETG. The name parser iterated material types in order and returned the first match ("PLA"), ignoring that "PLA Support for PETG" means the filament type is PETG. Both the frontend `parsePresetName()` and backend `_parse_material_from_name()` now detect the "X Support for Y" naming pattern and extract the material after "Support for". The frontend also prefers the corrected parsed material over the stored `filament_type` (which may have been saved with the old parser during import).
- **Firmware Check Shows Wrong Version for H2D Pro** ([#584](https://github.com/maziggy/bambuddy/issues/584)) — H2D Pro printers showed firmware as out of date because the firmware check matched against the H2D firmware track instead of the H2D Pro track. The firmware check's model-to-API-key mapping only had display names (e.g., "H2D", "H2D Pro") but not SSDP device codes (e.g., "O1E", "O2D"). Added all known SSDP model codes to the firmware check mapping so raw device codes resolve to the correct firmware track.
- **Spurious Error Notifications During Normal Printing (0300_0002)** — Some firmware versions send non-zero `print_error` values in MQTT during normal printing (e.g., `0x03000002` → short code `0300_0002`). The `print_error` parser treated any non-zero value as a real error, appending it to `hms_errors` and triggering notifications — even though the printer was printing fine. All known real HMS error codes have their low 16 bits >= `0x4000` (`0x4xxx` = fatal, `0x8xxx` = warning/pause, `0xCxxx` = prompt). Values below `0x4000` are status/phase indicators, not faults. Now skips values where the error portion is below `0x4000` in both the `print_error` and `hms` array parsers.
- **Spool Auto-Assign Fails With Greenlet Error** ([#612](https://github.com/maziggy/bambuddy/issues/612)) — RFID spool auto-assignment logged `WARNING greenlet_spawn has not been called; can't call await_only() here` and silently failed. The `Spool.assignments` relationship was never eagerly loaded: when `auto_assign_spool()` created a new `SpoolAssignment` and called `db.add()`, SQLAlchemy resolved the FK back-populates synchronously (outside the async greenlet), triggering a lazy load on the uninitialized `spool.assignments` collection. The previous fix only covered `spool.k_profiles`. Now also initializes `spool.assignments = []` on newly created spools in `create_spool_from_tray()`, and adds `selectinload(Spool.assignments)` to both queries in `get_spool_by_tag()` for existing spools. Added `exc_info=True` to the error handlers for full tracebacks in future logs.
- **SpoolBuddy Link Tag Missing tag_type** — Linking an NFC tag to a spool via the SpoolBuddy dashboard's "Link to Spool" action only set `tag_uid` but left `tag_type` and `data_origin` empty, because it called the generic `updateSpool` API instead of the dedicated `linkTagToSpool` endpoint. The printer card's `LinkSpoolModal` already used `linkTagToSpool` correctly. Now uses `linkTagToSpool` with `tag_type: 'generic'` and `data_origin: 'nfc_link'`, which also handles conflict checks and archived tag recycling.
- **SpoolBuddy AMS Page Missing Fill Levels for Non-BL Spools** — AMS slots with non-Bambu Lab spools assigned to inventory didn't show fill level bars on the SpoolBuddy AMS page, even though the main printer card displayed them correctly. The SpoolBuddy AMS page only used the MQTT `remain` field (which is -1/unknown for non-BL spools), while the printer card had a fallback chain: Spoolman → inventory → AMS remain. Now fetches inventory spool assignments and computes fill levels from `(label_weight - weight_used) / label_weight`, falling back to AMS remain when no inventory assignment exists.
- **SpoolBuddy AMS Page Ext-R Slot Falsely Shown as Active When Idle** — On dual-nozzle printers (H2D), the Ext-R slot was incorrectly highlighted as active when the printer was idle. The ext-R tray has `id=255`, and the idle sentinel `tray_now=255` matched it via `trayNow === extTrayId`. The main printer card avoided this by clearing `effectiveTrayNow` to `undefined` when `tray_now=255`. Now guards against `tray_now=255` before any ext slot active check.
- **Printer Card Loses Info When Print Is Paused** ([#562](https://github.com/maziggy/bambuddy/issues/562)) — When a print was paused (via G-code pause command or user action), the printer card showed the print as finished — the progress bar, print name, ETA, layer count, and cover image all disappeared, replaced by the idle "Ready to Print" placeholder. The display conditions only checked for `state === 'RUNNING'` but not `'PAUSE'`, even though other parts of the same page (Skip Objects button, Stop/Resume controls) already handled both states correctly. Now shows print progress info for both `RUNNING` and `PAUSE` states, and the status label correctly reads "Paused" instead of the hardcoded "Printing" fallback.
- **SpoolBuddy "Assign to AMS" Slot Shows Empty Fields in Slicer** — After assigning a spool to an AMS slot via SpoolBuddy's "Assign to AMS" button, the slicer's slot overview showed the correct filament, but opening the slot detail card showed all fields empty/unselected. Two bugs: (1) the `assign_spool` backend called the cloud API with the raw `slicer_filament` value including its version suffix (e.g., `PFUS9ac902733670a9_07`), which returned a 404; the silent fallback sent the `setting_id` as `tray_info_idx` instead of the real `filament_id` (e.g., `PFUS9ac902733670a9` instead of `P4d64437`), and the slicer couldn't resolve the preset; (2) no `SlotPresetMapping` was saved, so Bambuddy's own ConfigureAmsSlotModal couldn't identify the active preset when reopened. Now strips version suffixes before the cloud lookup, resolves the real `filament_id` via the cloud API (with local preset and generic ID fallbacks), includes the brand name in `tray_sub_brands`, and saves the slot preset mapping from the frontend after assignment.
- **Virtual Printer Bind Server Fails With TLS-Enabled Slicers** ([#559](https://github.com/maziggy/bambuddy/issues/559)) — BambuStudio uses TLS on port 3002 for certain printer models (e.g. A1 Mini / N1), but the bind server only spoke plain TCP on both ports 3000 and 3002. The slicer's TLS ClientHello was rejected as an "invalid frame", preventing discovery and connection entirely. Port 3002 now uses TLS (using the VP's existing certificate), while port 3000 remains plain TCP for backwards compatibility. The proxy-mode bind proxy was also updated to use TLS termination on port 3002.
- **Queue Returns 500 When Cancelled Print Exists** ([#558](https://github.com/maziggy/bambuddy/issues/558)) — When a print was cancelled mid-print, the MQTT completion handler stored status `"aborted"` on the queue item, but the response schema only accepts `"pending"`, `"printing"`, `"completed"`, `"failed"`, `"skipped"`, or `"cancelled"`. Listing all queue items hit a Pydantic validation error on the invalid status, returning a 500 error. Filtering by a specific status (e.g. "pending") excluded the bad row and worked fine. Now normalises `"aborted"` to `"cancelled"` before storing. A startup fixup also converts any existing `"aborted"` rows.
- **Tests Send Real Maintenance Notifications** — Tests that call `on_print_complete(status="completed")` created background `asyncio` tasks (maintenance check, smart plug, notifications) that outlived the test's mock context. When the event loop processed these orphaned tasks, `async_session` was no longer patched and they queried the real production database — finding real printers with maintenance due and real notification providers, then sending real notifications. Tests now cancel spawned background tasks before the mock context exits.
- **Virtual Printer Config Changes Ignored Until Toggle Off/On** — Changing a virtual printer's mode (e.g. proxy → archive), model, access code, bind IP, remote interface IP, or target printer via the UI updated the database but the running VP instance was never restarted. `sync_from_db()` skipped any VP whose ID was already in the running instances dict without checking if config had changed. Now compares critical fields between the running instance and DB record and restarts the VP when a difference is detected.
- **Sidebar Navigation Ignores User Permissions** — All sidebar navigation items (Archives, Queue, Stats, Profiles, Maintenance, Projects, Inventory, Files) were visible to every user regardless of their role's permissions. Only the Settings item was permission-gated. Now each nav item is hidden when the user lacks the corresponding read permission (e.g., `archives:read`, `queue:read`, `library:read`). The Printers item remains always visible as the home page. Also added the missing `inventory:read|create|update|delete` permissions to the frontend Permission type (they existed in the backend but were absent from the frontend type definition).
- **Camera Button Clickable Without Permission & ffmpeg Process Leak** ([#550](https://github.com/maziggy/bambuddy/issues/550)) — Two camera issues in multi-user environments (e.g., classrooms with multiple printers). First, the camera button on the printer card was clickable even when the user's role lacked `camera:view` permission. Now disabled with a permission tooltip, matching the existing pattern for `printers:control` on the chamber light button. Second, ffmpeg processes (~240MB each) were never cleaned up after closing a camera stream. The `stop_camera_stream` endpoint called `terminate()` but never `wait()`ed or `kill()`ed, and HTTP disconnect detection in the streaming response only checked between frames — if the generator was blocked reading from ffmpeg stdout, disconnect was never detected (due to TCP send buffer masking the closed connection). Three fixes: (1) the stop endpoint now uses `terminate()` → `wait(2s)` → `kill()` → `wait()`; (2) each stream gets a background disconnect monitor task that polls `request.is_disconnected()` every 2 seconds independently of the frame loop, directly killing the ffmpeg process on disconnect; (3) a periodic cleanup (every 60s) scans `/proc` for any ffmpeg process with a Bambu RTSP URL (`rtsps://bblp:`) that isn't in an active stream and `SIGKILL`s it — catching orphans that survive app restarts or generator abandonment.
- **Windows Install Fails With "Syntax of the Command Is Incorrect"** ([#544](https://github.com/maziggy/bambuddy/issues/544)) — The `start_bambuddy.bat` Python hash verification used a multi-line `for /f "usebackq"` with a backtick-delimited command split across lines. Windows CMD cannot parse line breaks inside backtick-delimited `for /f` commands, causing "The syntax of the command is incorrect" immediately after downloading Python. The entire block was also redundant — it downloaded a separate checksum file from python.org and re-verified the hash, but `verify_sha256` had already checked the archive against the pinned hash on the previous line. Removed the duplicate verification block. Also had a secondary bug: always downloaded the `amd64` checksum even on `arm64` systems.
- **Queue Badge Shows on Incompatible Printers** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — The purple queue counter badge in the printer card header showed on all printers of the same model when a job was scheduled for "any [model]", even if the printer didn't have the matching filament color loaded. The `PrinterQueueWidget` (which shows "Clear Plate & Start") already filtered by filament type and color, but the badge count used the raw unfiltered queue length. Now applies the same filament compatibility filter to the badge count.
- **SpoolBuddy Daemon Can't Find Hardware Drivers** — The daemon's `nfc_reader.py` and `scale_reader.py` import `read_tag` and `scale_diag` as bare modules, but these files live in `spoolbuddy/scripts/` which isn't on Python's module search path. The systemd service sets `WorkingDirectory` to `spoolbuddy/` and runs `python -m daemon.main`, so only the `spoolbuddy/` and `daemon/` directories are on `sys.path`. Added `scripts/` to `sys.path` at daemon startup, resolved relative to the module file so it works regardless of install path. Also moved the `read_tag` import inside `NFCReader.__init__`'s try/except block — it was previously outside, so a missing module crashed the entire daemon instead of gracefully skipping NFC polling. Demoted hardware-not-available log messages from ERROR to INFO since missing modules are expected when hardware isn't connected.
- **SpoolBuddy Scale Tare & Calibration Not Applied** — The SpoolBuddy scale tare and calibrate buttons on the Settings page queued commands but never executed them. Five bugs in the chain: (1) the daemon received the `tare` command via heartbeat but never called `scale.tare()` — a comment said "need cross-task communication" but the ScaleReader was already available in the shared dict; (2) no API endpoint existed for the daemon to report the new tare offset back to the backend database, so tare results were lost; (3) when calibration values changed in heartbeat responses, the daemon updated its config object but never called `scale.update_calibration()`, so the ScaleReader kept using its initial values forever; (4) the heartbeat response that delivered the tare command still contained pre-tare calibration values, which immediately overwrote the new tare offset back to zero; (5) the `set-factor` endpoint computed `calibration_factor` using the DB `tare_offset`, which could be stale or zero if the tare hadn't persisted yet — producing a wildly wrong factor (e.g., 5000g displayed with empty scale). Added a `POST /devices/{device_id}/calibration/set-tare` endpoint and `update_tare()` API client method. The heartbeat loop now executes `scale.tare()` when the tare command is received, persists the result via the new endpoint, propagates calibration changes to the ScaleReader instance, and skips calibration sync on the heartbeat cycle that delivers a tare command. The calibration flow now captures the raw ADC at tare time and sends it alongside the loaded-weight ADC in step 2, so the factor is computed from the actual tare reference rather than the DB value — making calibration self-contained and independent of the tare persistence round-trip. The calibration weight input uses a compact touch-friendly numpad since the RPi kiosk has no physical keyboard.
- **A1 Mini Shows "Unknown" Status After MQTT Payload Decode Failure** ([#549](https://github.com/maziggy/bambuddy/issues/549)) — Some printer firmware versions (observed on A1 Mini 01.07.02.00) occasionally send MQTT payloads containing non-UTF-8 bytes. The `_on_message` handler called `msg.payload.decode()` (strict UTF-8), and the resulting `UnicodeDecodeError` was not caught — only `json.JSONDecodeError` was handled. The entire message was silently dropped, causing printer status to show "unknown", temperatures to read 0°C, and AMS data to disappear. Now catches `UnicodeDecodeError` and falls back to `decode(errors="replace")`, which substitutes invalid bytes with U+FFFD while keeping the JSON structure intact. Logs a warning for diagnostics.
- **H2C Dual Nozzle Variant (O1C2) Not Recognized** ([#489](https://github.com/maziggy/bambuddy/issues/489)) — The H2C dual nozzle variant reports model code `O1C2` via MQTT, but only `O1C` was in the recognized model maps. This caused the camera to use the wrong protocol (chamber image on port 6000 instead of RTSP on port 322) — the printer immediately closed the connection, producing a reconnect loop. Also affected model display names, chamber temperature support detection, linear rail classification, and virtual printer model mapping. Added `O1C2` to all model ID maps across backend and frontend.
- **Support Package Leaks Full Subnet IPs and Misdetects Docker Network Mode** — Three support package fixes. First, the network section included full subnet addresses (e.g., `192.168.192.0/24`); now masks the first two octets (`x.x.192.0/24`). Second, `network_mode_hint` used `len(interfaces) > 2` which always reported "bridge" on single-NIC hosts even with `network_mode: host`, because `get_network_interfaces()` excludes Docker infrastructure interfaces. Now checks for the presence of Docker interfaces (`docker0`, `br-*`, `veth*`) via `socket.if_nameindex()` — these are only visible when the container shares the host network namespace. Third, `developer_mode` was still null for most users because the MQTT `fun` field was only parsed inside the `print` key; some firmware versions send it at the top level of the payload. Now also checks top-level `fun`. Also added a `virtual_printers` section with mode, model, enabled/running status, and pending file count for each configured virtual printer.
- **SpoolBuddy Scale Calibration Lost After Reboot** — The SpoolBuddy daemon generated its device ID from the MAC address of whichever network interface `Path.iterdir()` returned first, but filesystem iteration order is non-deterministic. On different boots, the daemon could pick `eth0` (MAC ending `3100`) or `wlan0` (MAC ending `3102`), producing a different `device_id` each time. Since calibration values (`tare_offset`, `calibration_factor`) are stored per device ID in the backend database, a new ID meant registering as a brand-new uncalibrated device. Fixed by sorting network interfaces alphabetically before selection, ensuring the same interface (and thus the same device ID) is always chosen.
- **SpoolBuddy NFC Reader Fails to Detect Tags** — The PN5180 NFC reader had two polling issues. First, each `activate_type_a()` call that returned `None` (no tag) corrupted the PN5180 transceive state — subsequent calls silently failed even when a tag was physically present, making it impossible to detect tags placed after startup (only tags already on the reader during init were detected). Fixed by performing a full hardware reset (RST pin toggle + RF re-init, ~240ms) before every idle poll, giving a ~1.8 Hz effective poll rate. Second, after a successful SELECT the card stayed in ACTIVE state and ignored subsequent WUPA/REQA, causing false "tag removed" events after ~1 second. Fixed with a light RF off/on cycle (13ms) before each poll when a tag is present, resetting the card to IDLE for re-selection. Also added error-based auto-recovery (full hardware reset after 10 consecutive poll exceptions), periodic status logging every 60 seconds, and accurate heartbeat reporting of NFC/scale health.

### Changed
- **CI: Node.js 20 → 22** — Updated GitHub Actions workflows (`ci.yml`, `security.yml`) from Node.js 20 to Node.js 22 LTS ahead of [GitHub's Node 20 deprecation](https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/).
- **Daily Builds Falsely Trigger Update Notification** — The version parser misclassified daily build tags (e.g. `0.2.2b4-daily.20260313`) as full releases instead of betas, because the `-daily.YYYYMMDD` suffix pushed the last dot-segment to a pure number (`20260313`), bypassing the prerelease detection. Users running the same beta version saw a spurious "update available" notification after each daily build. Now strips the daily suffix before parsing.
- **License changed from MIT to AGPL-3.0** — To prevent unauthorized redistribution of Bambuddy as a closed-source product. All existing contributions were made under MIT, which is forward-compatible with AGPL-3.0. Community contributions and usage are unaffected.
- **License changed from MIT to AGPL-3.0** — To prevent unauthorized redistribution of Bambuddy as a closed-source product. All existing contributions were made under MIT, which is forward-compatible with AGPL-3.0. Community contributions and usage are unaffected.

### Improved
- **Shorter Inventory Location Labels** — The location column in the Inventory table now shows compact labels like "H2D-1 B3" instead of "H2D-1 AMS-B Slot 3". External spool holders show "Ext" instead of "External". AMS-HT labels remain unchanged ("HT-A").
- **Higher FTP Timeout Options for Large Files** ([#660](https://github.com/maziggy/bambuddy/issues/660)) — Added 180s and 300s FTP timeout options in Settings. The previous maximum of 120s was insufficient for large 3MF files (e.g. 28 MB Hueforge models) which can't be downloaded from the printer's FTP server within 2 minutes, especially during active printing. Reported by @PasDoe.
- **Separate Permission for AMS Spool Assignments** ([#635](https://github.com/maziggy/bambuddy/issues/635)) — Added a new `inventory:view_assignments` permission that controls whether spool-to-AMS-slot assignment data is visible on the Printers page. Previously, viewing spool assignments on printer cards required `inventory:read`, which also exposed the full Inventory page in the sidebar. Admins can now grant `inventory:view_assignments` without `inventory:read` so users can see what's loaded in the AMS without accessing the full spool inventory. All default groups (Administrators, Operators, Viewers) include the new permission automatically. Also fixed multi-word permission labels in the group editor (e.g. "Update_Own" → "Update Own"). Reported by @Minebuddy.
- **Prometheus Build Info Metric** ([#633](https://github.com/maziggy/bambuddy/pull/633)) — Added a `bambuddy_build_info` gauge metric to the Prometheus metrics endpoint, exposing the application version, Python version, platform, and architecture as labels. Follows the standard Prometheus `_build_info` convention for dashboards and version-change alerting. Contributed by @sw1nn.
- **i18n: Settings, Smart Plugs, Notifications, Backup/Restore** — Replaced all hardcoded English strings with translation keys (`t()` calls) across the Settings page, Smart Plug components (SmartPlugCard, AddSmartPlugModal, SwitchbarPopover), Notification components (NotificationProviderCard, AddNotificationModal, NotificationTemplateEditor, NotificationLogViewer), and Backup/Restore components (GitHubBackupSettings, RestoreModal). Added ~600 new translation keys to all 7 supported locales (en, de, ja, fr, it, pt-BR, zh-CN). Removed hardcoded label maps (`PROVIDER_LABELS`, `EVENT_LABELS`, `CATEGORY_LABELS`) in favor of dynamic translation key lookups with fallbacks.
- **Install Script: Branch Selection** — The native install script (`install.sh`) now supports a `--branch` option and an interactive branch prompt (defaults to `main`). Previously the script hardcoded `origin/main`, so beta testers told to install from a beta branch would silently get the stable release instead. Fresh installs use `git clone --branch`, existing installs checkout and reset to the selected branch. The install summary highlights non-main branches in yellow with a "(beta)" label. Invalid branch names are caught early with an error message listing available branches.
- **Print Queue Scheduler Diagnostics** ([#616](https://github.com/maziggy/bambuddy/issues/616)) — Added diagnostic logging to the print queue scheduler to help diagnose why queued prints aren't starting. After each queue check, the scheduler now logs a skip summary (how many items were skipped due to manual_start, scheduled_time, etc.) and for each busy printer, logs the exact state preventing it from being considered idle (connected status, printer state, plate_cleared flag). Previously the scheduler only logged "found N pending items" with no visibility into why items were skipped.
- **SpoolBuddy Settings Page Redesign** — Redesigned the SpoolBuddy settings page with a tabbed layout (Device, Display, Scale, Updates). The Device tab shows an About section, NFC reader info (type, connection, status), device info (host, IP, uptime, online status), and device ID. The Display tab has a brightness slider (CSS software filter for HDMI displays) and screen blank timeout selector (Off, 1m, 2m, 5m, 10m, 30m) — the screen blanks after user inactivity (no touch) and wakes on tap. The Scale tab shows live weight with a step-indicator calibration wizard (tare → place known weight → calibrate). The Updates tab shows the daemon version and checks for updates against GitHub releases with optional beta inclusion. Display settings (brightness + blank timeout) are stored per-device in the backend and applied instantly in the frontend layout via outlet context.
- **SpoolBuddy Language & Time Format Support** — The SpoolBuddy kiosk now respects Bambuddy's configured UI language and time format. Added a `language` field to backend app settings so the UI language is persisted server-side (previously only stored in browser localStorage, inaccessible to the kiosk's separate Chromium instance). The SpoolBuddy layout fetches settings on load and syncs `i18n.changeLanguage()`. The top bar clock uses `formatTimeOnly()` with the user's time format setting (system/12h/24h). Added full SpoolBuddy settings translations for all 6 supported languages (English, German, French, Japanese, Italian, Portuguese).
- **SpoolBuddy Kiosk Stability** — Disabled Chromium's swipe-to-navigate gesture (`--overscroll-history-navigation=0`) in the install script to prevent accidental back-navigation on the touchscreen. Added the `video` group to the SpoolBuddy system user for DSI backlight access.
- **SpoolBuddy Touch-Friendly UI** — Enlarged all interactive elements across the SpoolBuddy kiosk UI for comfortable finger use on the 1024×600 RPi touchscreen. Bottom nav icons and labels increased (20→24px icons, 10→12px labels, 48→56px bar height). Top bar printer selector and clock enlarged. Dashboard stats bar compacted, printers card removed (printer selection via top bar is sufficient), section headers and device status text bumped up. AMS page single-slot cards, spool visualizations, and fill bars enlarged. AMS unit cards get larger spool previews (56→64px), bigger material/slot text, and larger humidity/temperature indicators. Inventory spool cards, settings page headers, and calibration inputs all sized up to meet 44px minimum tap targets. The AMS slot configuration modal now renders in a two-column full-screen layout on the kiosk display (filament list on left, K-profile and color picker on right) instead of the standard centered dialog, eliminating scrolling.
- **Ethernet Connection Indicator** ([#585](https://github.com/maziggy/bambuddy/issues/585)) — Printers connected via ethernet now show a green "Ethernet" badge with a cable icon instead of the WiFi signal strength indicator. Detected via `home_flag` bit 18 from the printer's MQTT data. The printer info modal also shows "Ethernet" instead of WiFi signal details.
- **SpoolBuddy AMS Page Single-Slot Card Layout** — AMS-HT and external spool cards on the SpoolBuddy AMS page now use a responsive grid (2 cards per AMS card width) instead of auto-sized flex items, so they align with the regular AMS card columns above. Regular AMS cards no longer stretch vertically to fill available space on printers with fewer AMS units.
- **SpoolBuddy Scale Value Stabilization** — The SpoolBuddy daemon now suppresses redundant scale weight reports: only sends updates when the weight changes by ≥2g. Previously every 1-second report interval sent a reading regardless of change, and stability state flips (stable ↔ unstable) also triggered reports — when ADC noise kept the spread hovering around the 2g stability threshold, the flag toggled every cycle, forcing a report with a slightly different weight each time. Removed stability flipping as a report trigger (the stable flag is still included in each report for consumers). Also increased the NAU7802 moving average window from 5 to 20 samples (500ms → 2s) to smooth ADC noise. The frontend also applies a 3g display threshold as defense-in-depth.
- **SpoolBuddy TopBar: Online Printer Selection** — The printer selector in the SpoolBuddy top bar now only shows online printers and auto-selects the first online printer. If the currently selected printer goes offline, it automatically switches to the next available online printer. Also replaced the placeholder icon with the SpoolBuddy logo. Renamed the connection status label from "Online" to "Backend" for clarity.
- **SpoolBuddy Assign to AMS Redesign** — The "Assign to AMS" sub-modal (opened from the spool card) is now a full-screen overlay that reuses the `AmsUnitCard` component from the AMS page. Regular AMS units display in a 2-column grid with the same spool visualization, fill bars, and material labels. AMS-HT and external slots (Ext / Ext-L / Ext-R on dual-nozzle printers) appear in a compact horizontal row below. Clicking any slot auto-configures the filament via a single `assignSpool` API call — the backend handles both the DB assignment and MQTT configuration. The printer selector was removed from the modal since the top bar already provides printer selection. Dual-nozzle printers show L/R nozzle badges on each AMS unit.
- **Filament ID Conversion Utility** — Extracted filament_id ↔ setting_id conversion logic into a shared utility (`backend/app/utils/filament_ids.py`). The `assign_spool` endpoint now normalizes `slicer_filament` (which can be stored in either filament_id format like "GFL05" or setting_id format like "GFSL05_07") into the correct `tray_info_idx` and `setting_id` for the MQTT command. Previously `setting_id` was always sent as empty string, which could cause BambuStudio to not resolve the filament preset for the AMS slot.
- **Updates Card Separates Firmware and Software Settings** — The Updates card on the Settings page mixed printer firmware and Bambuddy software update toggles with no visual grouping. Now splits the card into two labeled sections ("Printer Firmware" and "Bambuddy Software") separated by a divider, making it clear which toggles control what.
- **SpoolBuddy Test Coverage** — Added integration tests for all 12 SpoolBuddy API endpoints (21 backend tests covering device registration/re-registration, heartbeat status and pending commands, NFC tag scan/match/removal, scale reading broadcast, spool weight calculation, and scale calibration including tare, set-factor, and zero-delta error handling) and component tests for the three main SpoolBuddy frontend components (20 frontend tests covering WeightDisplay weight formatting and status indicators, SpoolInfoCard spool info rendering and action callbacks, UnknownTagCard tag display, and TagDetectedModal open/close/escape behavior with known and unknown spool views).
- **Cleanup Obsolete Settings** — The startup migration now deletes orphaned settings keys from the database that are no longer used by the application (e.g., `slicer_binary_path` from earlier slicer integration research).
- **Added HUF Currency** ([#579](https://github.com/maziggy/bambuddy/issues/579)) — Added Hungarian Forint (HUF, Ft) to the supported currencies list for filament cost tracking.
- **FTP Upload Progress & Speed** — Reduced FTP upload chunk size from 1MB to 64KB for smoother progress reporting — at typical printer FTP speeds (~50-100KB/s) the progress bar now updates roughly every second instead of appearing stuck for 20+ seconds between jumps. Removed the post-upload `voidresp()` wait for all printer models (previously only skipped for A1); H2D printers delay the FTP 226 acknowledgment by 30+ seconds after data transfer completes, causing a long hang at 100%. The data is already on the SD card once the transfer finishes. Also added transfer speed logging (KB/s) and PASV+TLS handshake timing to help diagnose slow connections.
- **Wider Print & Schedule Modals** — Increased the Print and Schedule Print modal width from 512px to 672px to better accommodate long filament profile names (e.g., "PLA Support for PETG PETG Basic @Bambu Lab H2D 0.4 nozzle").

### Security
- **Stored XSS via Project Notes** — Project notes were rendered with `dangerouslySetInnerHTML` without sanitization, allowing injected `<script>` or event handler payloads to execute in any viewer's browser and steal JWT tokens from localStorage. Now sanitized with DOMPurify before rendering.
- **Stored XSS via 3MF Description (Sanitizer Bypass)** — The hand-rolled HTML sanitizer in the Project Page modal reconstructed `<a>` tags by interpolating the `href` attribute without escaping embedded quotes. A crafted 3MF file with a single-quoted `href` containing a double-quote break-out could inject `onmouseover` event handlers through the sanitizer. Replaced the custom sanitizer with DOMPurify.
- **Unauthenticated Auth Toggle via Setup Endpoint** — The `/api/v1/auth/setup` endpoint could be called without authentication even when auth was already enabled, allowing any network client to disable authentication entirely. Now returns 403 when auth is already enabled; use the authenticated admin panel to modify auth settings.
- **PyJWT ≥2.12.0** — Bumped minimum version to address CVE-2026-32597.
- **flatted ≥3.4.0** — Updated transitive ESLint dependency to address GHSA-25h7-pfq9-p65f (unbounded recursion DoS).
- **Access Code Redacted from Support Logs** — Printer access codes embedded in RTSP stream URLs were not redacted in support bundles and bug report logs. Extended the URL credential sanitizer to cover `rtsps://` URLs and added access codes to the sensitive string collection for exact-match redaction.

## [0.2.2b3] - 2026-03-12

### New Features
- **Home Assistant Notification Provider** ([#656](https://github.com/maziggy/bambuddy/issues/656)) — Added Home Assistant as a notification provider. When HA is configured in Settings → Network → Home Assistant, selecting "Home Assistant" as a notification provider sends persistent notifications to the HA dashboard — no additional configuration needed. From there, HA automations can forward notifications to mobile apps, WhatsApp, or any other service. Requested by @TravisWilder.
- **Virtual Printer Queue Auto-Dispatch Toggle** ([#587](https://github.com/maziggy/bambuddy/issues/587)) — Added an "Auto-dispatch" toggle to virtual printers in Queue mode. When enabled (default), prints sent from the slicer are added to the queue and start automatically on the assigned printer — matching the current behavior. When disabled, prints are added to the queue with `manual_start` set, so they wait for manual dispatch. This allows users who want to review and manually assign prints before they start. Requested by @Percy2Live.
- **Queue All Plates** ([#530](https://github.com/maziggy/bambuddy/issues/530)) — Multi-plate 3MF files can now be queued in one action. When adding a multi-plate file to the queue, a "Queue All N Plates" toggle appears in the plate selector. When activated, every plate is added as a separate queue entry (one per plate × per selected printer), each individually editable from the queue page. The toggle is only available in add-to-queue mode (not reprint or edit). Requested by @Dendrowen.
- **Malaysian Ringgit Currency** ([#634](https://github.com/maziggy/bambuddy/issues/634)) — Added MYR (RM) to the list of supported currencies for filament cost tracking. Requested by @cynogen127.
- **ETA Variable in Notifications** ([#638](https://github.com/maziggy/bambuddy/issues/638)) — Added `{eta}` template variable to print start, print progress, and queue job started notifications. Shows the estimated wall-clock completion time (e.g. "15:53" or "3:53 PM") based on the user's configured time format (12h/24h). Existing `{estimated_time}` still shows duration ("1h 23m"). Requested by @SebSeifert.
- **Bulk Delete Spool and Color Catalog Entries** ([#646](https://github.com/maziggy/bambuddy/issues/646)) — Added checkbox selection and bulk delete to both the Spool Catalog and Color Catalog in Settings > Filament. Select individual entries with checkboxes, use the header checkbox to select/deselect all visible entries, then click "Delete Selected" to remove them in one operation. Previously, entries could only be deleted one at a time. Requested by @SebSeifert.
- **Force Color Match** ([#625](https://github.com/maziggy/bambuddy/pull/625)) — Added a "Force Color Match" option for "Print to Any" queue scheduling. When enabled, the scheduler requires a strict color match when assigning prints to printers, preventing incorrect filament assignments when multiple candidates are close in color. Prints wait in the queue until a printer with the exact matching filament is available. Contributed by @cadtoolbox.
- **Israeli New Shekel Currency** — Added ILS (₪) to the list of supported currencies for filament cost tracking.

### Changes
- **License changed from MIT to AGPL-3.0** — To prevent unauthorized redistribution of Bambuddy as a closed-source product. All existing contributions were made under MIT, which is forward-compatible with AGPL-3.0. Community contributions and usage are unaffected.

### Improved
- **Shorter Inventory Location Labels** — The location column in the Inventory table now shows compact labels like "H2D-1 B3" instead of "H2D-1 AMS-B Slot 3". External spool holders show "Ext" instead of "External". AMS-HT labels remain unchanged ("HT-A").
- **Higher FTP Timeout Options for Large Files** ([#660](https://github.com/maziggy/bambuddy/issues/660)) — Added 180s and 300s FTP timeout options in Settings. The previous maximum of 120s was insufficient for large 3MF files (e.g. 28 MB Hueforge models) which can't be downloaded from the printer's FTP server within 2 minutes, especially during active printing. Reported by @PasDoe.
- **Separate Permission for AMS Spool Assignments** ([#635](https://github.com/maziggy/bambuddy/issues/635)) — Added a new `inventory:view_assignments` permission that controls whether spool-to-AMS-slot assignment data is visible on the Printers page. Previously, viewing spool assignments on printer cards required `inventory:read`, which also exposed the full Inventory page in the sidebar. Admins can now grant `inventory:view_assignments` without `inventory:read` so users can see what's loaded in the AMS without accessing the full spool inventory. All default groups (Administrators, Operators, Viewers) include the new permission automatically. Also fixed multi-word permission labels in the group editor (e.g. "Update_Own" → "Update Own"). Reported by @Minebuddy.
- **Prometheus Build Info Metric** ([#633](https://github.com/maziggy/bambuddy/pull/633)) — Added a `bambuddy_build_info` gauge metric to the Prometheus metrics endpoint, exposing the application version, Python version, platform, and architecture as labels. Follows the standard Prometheus `_build_info` convention for dashboards and version-change alerting. Contributed by @sw1nn.

### Fixed
- **Beta Updates Shown When Disabled** ([#731](https://github.com/maziggy/bambuddy/issues/731)) — Daily beta builds (e.g. `v0.2.3b1-daily.20260316`) were offered as updates even with "Include beta versions" toggled off. The version parser only checked the last dot-separated segment for prerelease markers, but daily build tags put the beta indicator (`b1`) earlier with a numeric date suffix as the last segment. Now checks the entire version string. Reported by @Teolhyn.
- **Debug Logging Endpoint 500 Error** — The `GET /api/v1/support/debug-logging` endpoint returned a 500 Internal Server Error when the database contained a timezone-aware timestamp written by a previous version. The duration calculation subtracted a timezone-aware datetime from a naive `datetime.now()`, raising `TypeError`. Now strips timezone info when reading the stored timestamp.
- **Bed Cooled Notification Never Fires** ([#497](https://github.com/maziggy/bambuddy/issues/497)) — The bed cooldown monitor always timed out after 30 minutes without sending a notification. After print completion, P1S (and likely other models) sends partial MQTT status updates that don't include `bed_temper`, so the cached bed temperature stayed frozen at the end-of-print value and never dropped below the threshold. The monitor now sends periodic `pushall` commands to the printer to force fresh temperature data. Also added debug logging to the polling loop for future diagnostics.
- **Notification Provider Missing Event Toggles on Create** ([#497](https://github.com/maziggy/bambuddy/issues/497)) — When creating a new notification provider, the `on_bed_cooled` toggle and all 7 queue event toggles (`on_queue_job_added`, `on_queue_job_assigned`, `on_queue_job_started`, `on_queue_job_waiting`, `on_queue_job_skipped`, `on_queue_job_failed`, `on_queue_completed`) were silently discarded. The create endpoint manually listed each field but omitted these 8 toggles, so they always defaulted to `false` regardless of user selection. Editing an existing provider worked correctly.
- **Clear Plate Prompt Shown for Staged Queue Items** — The "Clear Plate & Start Next" button on the printer card appeared when all pending queue items were staged (`manual_start`/Queue Only), even though the scheduler won't auto-start them. The clear plate prompt now only appears when there are auto-dispatchable items that the scheduler will actually start after the plate is cleared.
- **Ethernet Badge Shown on WiFi-Only Printers** ([#585](https://github.com/maziggy/bambuddy/issues/585)) — The printer card network badge always showed "Ethernet" even on printers without an ethernet port. WiFi-only models (A1, P1P, etc.) are now excluded via model-based gating. Reported by @cadtoolbox.
- **GitHub Backup Required Cloud Login** ([#655](https://github.com/maziggy/bambuddy/issues/655)) — The GitHub backup settings card was completely blocked behind Bambu Cloud authentication, showing "Bambu Cloud login required" even though the backup feature works without it (K-profiles and app settings don't need cloud). Removed the cloud auth gate so GitHub backup can be configured and used without Bambu Cloud. The "Cloud Profiles" checkbox is disabled with a hint when not logged in. Reported by @TravisWilder.
- **GitHub Backup Log Timestamps Off by 1 Hour** — Backup log timestamps in the history table were displayed in UTC instead of the user's local timezone. The local `formatDateTime` function didn't use `parseUTCDate`, so timezone-less timestamps from SQLite were interpreted as local time. Now uses the shared `parseUTCDate` utility for correct UTC-to-local conversion.
- **H2D AMS Units Shown on Wrong Nozzle** ([#659](https://github.com/maziggy/bambuddy/issues/659)) — On the H2D dual-nozzle printer, AMS units were displayed on the wrong nozzle (e.g. both AMS-HT and AMS2 Pro shown on the left nozzle instead of their correct assignments). Three interrelated bugs in the AMS `info` field parsing: (1) the field was parsed as decimal instead of hexadecimal (BambuStudio uses `std::stoull(str, nullptr, 16)`), (2) the extruder ID was extracted as a single bit instead of a 4-bit field, and (3) partial MQTT updates overwrote the full extruder map instead of merging. Now correctly hex-parses the `info` field, extracts the 4-bit extruder ID from bits 8-11, skips uninitialized AMS units (`0xE`), and merges partial updates into the existing map. Reported by @cadtoolbox.
- **SD Card Error After FTP Upload** ([#645](https://github.com/maziggy/bambuddy/issues/645)) — After printing one file, subsequent prints could fail with `0500-C010 "MicroSD Card read/write exception"` until Bambuddy was restarted. The FTP upload used `transfercmd()` for A1 compatibility but skipped reading the server's 226 "Transfer complete" response, leaving the SD card file write unconfirmed. The print command was sent via MQTT before the printer's FTP server had finished flushing the file to disk. Now waits for the 226 confirmation after each upload (with a 60-second timeout for slower models like H2D). Reported by @lanfi89, confirmed by @Bademeister89.
- **P2S Shows Carbon Rod Maintenance Tasks** ([#640](https://github.com/maziggy/bambuddy/issues/640)) — The P2S was incorrectly classified as a carbon rod printer, showing "Lubricate Carbon Rods" and "Clean Carbon Rods" maintenance tasks. The P2S uses hardened steel linear shafts, not carbon fiber rods. Added a new `steel_rod` motion system category and "Lubricate Steel Rods" / "Clean Steel Rods" maintenance tasks specific to the P2S. X1/P1 series continue to show carbon rod tasks; A1/H2 series continue to show linear rail tasks. Reported by @maziggy.
- **Dispatch Toast Stuck After Second Print** — The print dispatch progress toast ("Starting prints…") stayed visible forever after the second print dispatch in a session. The dedup guard (`lastDispatchSummaryRef`) that prevents duplicate completion toasts was never reset between batches, so every single-printer dispatch produced the same summary key (`"first-complete:1:0"`). The first print completed normally, but subsequent completions matched the stale ref and skipped creating the done toast — leaving the progress toast stuck in "Processing" state with no way to dismiss except a page reload. Now resets the dedup guard whenever the dispatch toast is dismissed (auto-dismiss timeout, cleanup events) and when a new batch starts.
- **Archive Card Buttons Overlapping at Narrow Widths** ([#641](https://github.com/maziggy/bambuddy/issues/641)) — The "Reprint" and "Schedule" buttons at the bottom of archive cards overlapped when the browser window was narrower than the card grid expected (e.g. snapped to half-screen on a 2K monitor). The button text labels used a viewport-based `sm:` breakpoint that didn't account for actual card width. Added `overflow-hidden` to the flex buttons and `truncate` to the text spans so labels clip cleanly with ellipsis instead of bleeding into adjacent buttons. Reported by rsocko@outlook.com, confirmed by @dsmitty166.
- **Debug Logging Banner Timer Shows Negative Time** — When enabling debug logging, the banner showed a negative duration (e.g. "-60m -59s") equal to the server's UTC offset. The `enabled_at` timestamp was stored using `datetime.now()` (local time, no timezone indicator), but the frontend interpreted it as UTC. Now stores and compares all debug logging timestamps in UTC.
- **Non-Bambu Lab Spools Can't Link/Unlink to Spoolman** ([#653](https://github.com/maziggy/bambuddy/pull/653)) — The "Link to Spoolman" button was not shown for non-Bambu Lab spools (which lack RFID tag UIDs). Now generates a fallback tag from the printer ID, AMS ID, and tray ID for spools without RFID identifiers. Also added an "Unlink from Spoolman" button for non-Bambu spools that are already linked. Contributed by @shrunbr.
- **Spoolman Location Not Updated on Link/Unlink** ([#669](https://github.com/maziggy/bambuddy/pull/669)) — Linking a spool to Spoolman did not set the spool's location field. Now sets the Spoolman location to the printer name, AMS name, and slot number (e.g. "P2S-1 - AMS-A 3") when linking, and clears it when unlinking. Contributed by @shrunbr.

## [0.2.2b2] - 2026-03-06

### New Features
- **AMS Info Card & Custom Labels** ([#570](https://github.com/maziggy/bambuddy/pull/570)) — Hovering an AMS label (e.g. "AMS-A") on the Printers page now shows a popover with serial number, firmware version, and an editable friendly name. Custom labels are stored by AMS serial number so they persist when the unit is moved to a different printer. Slot numbers are now displayed inside each filament color circle with auto-inverted contrast for readability. Labels also appear in the Inventory page's location column. Contributed by @cadtoolbox.

### Changes
- **License changed from MIT to AGPL-3.0** — To prevent unauthorized redistribution of Bambuddy as a closed-source product. All existing contributions were made under MIT, which is forward-compatible with AGPL-3.0. Community contributions and usage are unaffected.

### Improved
- **i18n: Settings, Smart Plugs, Notifications, Backup/Restore** — Replaced all hardcoded English strings with translation keys (`t()` calls) across the Settings page, Smart Plug components (SmartPlugCard, AddSmartPlugModal, SwitchbarPopover), Notification components (NotificationProviderCard, AddNotificationModal, NotificationTemplateEditor, NotificationLogViewer), and Backup/Restore components (GitHubBackupSettings, RestoreModal). Added ~600 new translation keys to all 7 supported locales (en, de, ja, fr, it, pt-BR, zh-CN). Removed hardcoded label maps (`PROVIDER_LABELS`, `EVENT_LABELS`, `CATEGORY_LABELS`) in favor of dynamic translation key lookups with fallbacks.
- **Install Script: Branch Selection** — The native install script (`install.sh`) now supports a `--branch` option and an interactive branch prompt (defaults to `main`). Previously the script hardcoded `origin/main`, so beta testers told to install from a beta branch would silently get the stable release instead. Fresh installs use `git clone --branch`, existing installs checkout and reset to the selected branch. The install summary highlights non-main branches in yellow with a "(beta)" label. Invalid branch names are caught early with an error message listing available branches.
- **Print Queue Scheduler Diagnostics** ([#616](https://github.com/maziggy/bambuddy/issues/616)) — Added diagnostic logging to the print queue scheduler to help diagnose why queued prints aren't starting. After each queue check, the scheduler now logs a skip summary (how many items were skipped due to manual_start, scheduled_time, etc.) and for each busy printer, logs the exact state preventing it from being considered idle (connected status, printer state, plate_cleared flag). Previously the scheduler only logged "found N pending items" with no visibility into why items were skipped.

### Fixed
- **Print Dispatch Toast Disappears Instantly on Fast Uploads** ([#615](https://github.com/maziggy/bambuddy/issues/615)) — When sending a print job, the notification popup disappeared instantly for small files or closed immediately when the progress bar reached 100% for larger files, giving no confirmation that the job was submitted. The dispatch toast now stays visible for 3 seconds after completion, showing a success message (e.g. "1 print started successfully") before auto-dismissing. For very fast uploads where the progress toast was never shown, a fresh confirmation toast is created instead. Reported by @aneopsy.
- **Print Modal Shows Busy Printers as Selectable** ([#622](https://github.com/maziggy/bambuddy/issues/622)) — When printing a file from the file manager, the print modal listed all printers including busy ones. Selecting a busy printer resulted in a failed send notification. The printer selector now fetches each printer's live status and shows a state badge (Idle, Printing, Paused, Preparing, Finished, Failed, Offline). In reprint mode, busy printers are grayed out and not selectable. "Select all" also skips busy printers. In queue mode, busy printers remain selectable since the job will wait. Reported by contact@aito3d.fr.
- **PWA Install Not Available in Chrome** ([#629](https://github.com/maziggy/bambuddy/issues/629)) — Chrome did not show the PWA install prompt because the manifest icons had incorrect dimensions (e.g. 190px wide declared as 192px) and the manifest was missing the `screenshots` entries required for Chrome's richer install UI. Resized all three icons (`android-chrome-192x192.png`, `android-chrome-512x512.png`, `apple-touch-icon.png`) to their declared sizes, split the discouraged `"any maskable"` purpose into a dedicated `"maskable"` entry, and added mobile and desktop screenshots to the manifest. Reported by @SebSeifert.
- **Project Statistics Count Archived Files as Printed** ([#630](https://github.com/maziggy/bambuddy/issues/630)) — Files added to a project from the archive were counted in project statistics (completed prints, parts progress) as if they had already been printed. Only files with `status="completed"` (actually printed via a printer) now count toward completion stats. Files with `status="archived"` (stored but not yet printed) are no longer included. Reported by @SebSeifert.
- **Python 3.10 Compatibility** — Bambuddy failed to start on Python 3.10 with `ImportError: cannot import name 'StrEnum' from 'enum'` because `enum.StrEnum` was added in Python 3.11. Added a compatibility shim that falls back to `(str, Enum)` on Python < 3.11, matching the documented requirement of Python 3.10+.
- **Bug Report Bubble Overlapping Toasts** — Moved toast notifications and upload progress up so they stack above the bug report bubble instead of overlapping on top of each other.
- **Virtual Printer: Bind-TLS Proxy Handshake Failure on OpenSSL 3.x** — The TLS proxy connecting to the printer's bind port (3002) failed with `SSLV3_ALERT_HANDSHAKE_FAILURE` on systems with OpenSSL 3.x (e.g. Python 3.12+) because the default cipher set excludes plain RSA key exchange, which is the only mode Bambu printers support. Added `AES256-GCM-SHA384` and `AES128-GCM-SHA256` to the client SSL context's cipher list.
- **Windows: Server Shuts Down After 60 Seconds** ([#605](https://github.com/maziggy/bambuddy/issues/605)) — On Windows, terminating orphaned ffmpeg camera processes broadcast `CTRL_C_EVENT` to the entire process group, causing uvicorn to interpret it as a user-initiated shutdown. ffmpeg is now spawned in its own process group (`CREATE_NEW_PROCESS_GROUP`) so cleanup no longer affects the server. Reported by @Reactantvr.
- **Multi-Printer Filament Mapping Shows Wrong Nozzle Filaments on Dual-Nozzle Printers** ([#624](https://github.com/maziggy/bambuddy/issues/624)) — When selecting multiple printers for a print job on dual-nozzle printers (H2D), the per-printer filament mapping override dropdown showed filaments from both nozzles instead of only the correct nozzle for each slot. The single-printer filament mapping (FilamentMapping.tsx) was fixed in v0.2.1 to filter by `nozzle_id`, but the multi-printer path (InlineMappingEditor in PrinterSelector.tsx) was missed. Both the auto-match logic and the dropdown options now filter by `nozzle_id`, matching the single-printer behavior. Reported by @cadtoolbox.
- **Filament Mapping Dropdowns Missing Subtypes** ([#624](https://github.com/maziggy/bambuddy/issues/624)) — All filament mapping dropdowns (single-printer, multi-printer, and "Print to Any" model-based assignment) showed only the base material type (e.g., "PLA") without the subtype (e.g., "PLA Basic", "PLA Matte"). This made it impossible to distinguish between different filament variants of the same color. Now shows `tray_sub_brands` (e.g., "PLA Basic", "PLA Matte", "PETG HF") in all filament dropdowns, falling back to the base type when no subtype is set. The backend's available-filaments endpoint also includes `tray_sub_brands` in the dedup key, so "PLA Basic Black" and "PLA Matte Black" appear as separate entries instead of collapsing into duplicate "PLA (Black)" rows. Reported by @cadtoolbox.

## [0.2.2b1] - 2026-03-03

### Improved
- **SpoolBuddy Settings Page Redesign** — Redesigned the SpoolBuddy settings page with a tabbed layout (Device, Display, Scale, Updates). The Device tab shows an About section, NFC reader info (type, connection, status), device info (host, IP, uptime, online status), and device ID. The Display tab has a brightness slider (CSS software filter for HDMI displays) and screen blank timeout selector (Off, 1m, 2m, 5m, 10m, 30m) — the screen blanks after user inactivity (no touch) and wakes on tap. The Scale tab shows live weight with a step-indicator calibration wizard (tare → place known weight → calibrate). The Updates tab shows the daemon version and checks for updates against GitHub releases with optional beta inclusion. Display settings (brightness + blank timeout) are stored per-device in the backend and applied instantly in the frontend layout via outlet context.
- **SpoolBuddy Language & Time Format Support** — The SpoolBuddy kiosk now respects Bambuddy's configured UI language and time format. Added a `language` field to backend app settings so the UI language is persisted server-side (previously only stored in browser localStorage, inaccessible to the kiosk's separate Chromium instance). The SpoolBuddy layout fetches settings on load and syncs `i18n.changeLanguage()`. The top bar clock uses `formatTimeOnly()` with the user's time format setting (system/12h/24h). Added full SpoolBuddy settings translations for all 6 supported languages (English, German, French, Japanese, Italian, Portuguese).
- **SpoolBuddy Kiosk Stability** — Disabled Chromium's swipe-to-navigate gesture (`--overscroll-history-navigation=0`) in the install script to prevent accidental back-navigation on the touchscreen. Added the `video` group to the SpoolBuddy system user for DSI backlight access.
- **SpoolBuddy Touch-Friendly UI** — Enlarged all interactive elements across the SpoolBuddy kiosk UI for comfortable finger use on the 1024×600 RPi touchscreen. Bottom nav icons and labels increased (20→24px icons, 10→12px labels, 48→56px bar height). Top bar printer selector and clock enlarged. Dashboard stats bar compacted, printers card removed (printer selection via top bar is sufficient), section headers and device status text bumped up. AMS page single-slot cards, spool visualizations, and fill bars enlarged. AMS unit cards get larger spool previews (56→64px), bigger material/slot text, and larger humidity/temperature indicators. Inventory spool cards, settings page headers, and calibration inputs all sized up to meet 44px minimum tap targets. The AMS slot configuration modal now renders in a two-column full-screen layout on the kiosk display (filament list on left, K-profile and color picker on right) instead of the standard centered dialog, eliminating scrolling.
- **Ethernet Connection Indicator** ([#585](https://github.com/maziggy/bambuddy/issues/585)) — Printers connected via ethernet now show a green "Ethernet" badge with a cable icon instead of the WiFi signal strength indicator. Detected via `home_flag` bit 18 from the printer's MQTT data. The printer info modal also shows "Ethernet" instead of WiFi signal details.

### New Features
- **In-App Bug Reporting** — A floating bug report button in the bottom-right corner lets users submit bug reports directly from the Bambuddy UI. Reports include a description, optional screenshot (upload, paste, or drag & drop with automatic JPEG compression), optional contact email, and automatically collected diagnostic data. On submit, the system temporarily enables debug logging, sends push_all to all connected printers, waits 30 seconds to collect fresh logs, then submits everything to a secure relay on bambuddy.cool which creates a GitHub issue with sanitized logs uploaded as a separate file. All sensitive data (printer names, serial numbers, IPs, credentials, email addresses) is redacted from logs before submission. The expandable data privacy notice details exactly what is and isn't collected. Translated into all 7 supported languages.
- **SpoolBuddy NFC Tag Writing (OpenTag3D)** — SpoolBuddy can now write NFC tags for third-party filament spools using the OpenTag3D format on NTAG213/215/216 stickers. A new "Write" page (`/spoolbuddy/write-tag`) in the kiosk UI provides three workflows: write a tag for an existing inventory spool (no tag linked yet), create a new spool and write in one flow, or replace a damaged tag (unlinks old, writes new). The left panel shows a searchable spool list or a compact creation form (material dropdown, color picker, brand, weight); the right panel shows real-time NFC status with tag detection, a spool summary, and the write button. The backend encodes spool data as a 133-byte OpenTag3D NDEF message (MIME type `application/opentag3d`, fits NTAG213's 144-byte capacity) containing material, color, brand, weight, temperature, and RGBA color data. The write command flows through the existing heartbeat polling mechanism — the frontend queues a write, the daemon picks it up on the next heartbeat, writes page-by-page with read-back verification via the PN5180's NTAG WRITE (0xA2) command, and reports success/failure via WebSocket. On success the tag UID is automatically linked to the spool with `data_origin=opentag3d`. Written tags are readable by any OpenTag3D-compatible reader including SpoolBuddy itself. Translations added for all 6 languages.
- **SpoolBuddy On-Screen Keyboard** — Added a virtual QWERTY keyboard for the SpoolBuddy kiosk UI (and login page) since the Raspberry Pi has no physical keyboard and system-level virtual keyboards (squeekboard, wvkbd) don't auto-show/hide in the labwc/Chromium kiosk environment. Uses `react-simple-keyboard` with a dark theme matching the bambu-dark/bambu-green palette. Auto-shows when any text/password/email input is focused, supports shift, caps lock, backspace, and email-friendly keys (@, .). Inputs with `data-vkb="false"` are excluded (e.g. SpoolBuddySettingsPage's own numpad). A two-phase close prevents ghost-click passthrough to elements underneath the keyboard.
- **SpoolBuddy Inline Spool Cards** — Placing an NFC-tagged spool on the SpoolBuddy reader now shows spool info directly in the dashboard's right panel instead of a separate modal overlay. Known spools display a SpoolIcon with color/brand/material, a large remaining-weight readout with fill bar, and a weight comparison grid, with action buttons for "Assign to AMS", "Sync Weight", and "Close". Unknown tags show the tag UID, scale weight, and offer "Add to Inventory" or "Link to Spool" actions. The card stays visible if the tag is removed (for continued interaction) and won't re-appear for the same tag after dismissal — but re-placing a tag after removal shows it again. The idle spool animation displays when no tag is detected.
- **SpoolBuddy AMS Page: External Slots & Slot Configuration** — The SpoolBuddy AMS page (`/spoolbuddy/ams`) now displays external spool slots (single nozzle: "Ext", dual nozzle: "Ext-L"/"Ext-R") and AMS-HT units in a compact horizontal row below the regular AMS grid, fitting within the 1024×600 kiosk display without scrolling. Clicking any AMS, AMS-HT, or external slot opens the `ConfigureAmsSlotModal` to configure filament type and color — the same modal used on the main Printers page. Dual-nozzle printers show L/R nozzle badges on each AMS unit. Temperature and humidity are displayed with threshold-colored SVG icons (green/gold/red) matching the Bambu Lab style on the main printer cards, using the configured AMS humidity and temperature thresholds from settings.
- **SpoolBuddy Dashboard Redesign** — Redesigned the SpoolBuddy dashboard with a two-column layout: left column shows device connection status (scale and NFC with state-colored icons — green when device is online, gray when offline) and printer status badges below (compact pills with green/gray dots for online/offline, wrapping to fit without scrolling); right column shows the current spool card. Cards use a dashed border style for a cleaner look. The large weight display card was removed in favor of the inline scale reading in the device card. Unknown NFC tags now offer a quick-add modal that creates a basic PLA spool entry linked to the tag — with a hint recommending users add spools via the main Bambuddy UI first for full details. The separate SpoolBuddy inventory page was removed since inventory management belongs in the main Bambuddy frontend; the bottom nav now has three tabs (Dashboard, AMS, Settings).
- **SpoolBuddy Kiosk Auth Bypass via API Key** — When Bambuddy auth is enabled, the SpoolBuddy kiosk (Chromium on RPi) was redirected to the login page because the `ProtectedRoute` requires a user object from `GET /auth/me`, which only accepted JWT tokens. The `/auth/me` endpoint now also accepts API keys (via `Authorization: Bearer bb_xxx` or `X-API-Key` header) and returns a synthetic admin user with all permissions. The frontend's `AuthContext` reads an optional `?token=` URL parameter on first load, stores it in localStorage, and strips it from the URL to prevent leakage via browser history or referrer. The install script now includes the API key in the kiosk URL (`/spoolbuddy?token=${API_KEY}`), so the device authenticates automatically on boot without manual login.
- **Daily Beta Builds** — Added a release script (`docker-publish-daily-beta.sh`) that reads the current `APP_VERSION` from config, builds a multi-arch Docker image, pushes to both GHCR and Docker Hub, and creates/updates a GitHub prerelease with changelog notes. Daily builds overwrite the same beta version tag (e.g., `0.2.2b1`) — users pull the latest by re-pulling the tag or using Watchtower. Beta images are never tagged as `latest`.
- **Inventory Scale Weight Check Column** — Added a "Weight Check" column (hidden by default) to the inventory table that compares each spool's last scale measurement against its calculated gross weight (net remaining + core weight). Spools within a ±50g tolerance show a green checkmark; mismatched spools show a yellow warning with the difference and a sync button that trusts the scale reading and resets weight tracking. The backend stores `last_scale_weight` and `last_weighed_at` on each spool whenever weight is synced via SpoolBuddy, and the column tooltip shows scale weight, calculated weight, and difference. Edge case: when scale weight is below core weight (empty spool or not on scale), the comparison treats it as a match since sync can't correct this.

### Fixed
- **Archive Card Shows "Source" Badge for Sliced .3mf Files** — Archive cards created from prints showed a "SOURCE" badge instead of "GCODE" when the filename was a plain `.3mf` (without `.gcode` in the name). The `isSlicedFile()` check only matched `.gcode` or `.gcode.3mf` extensions, but `.3mf` files can be either sliced (contains gcode) or raw source models. Now checks the archive's `total_layers` and `print_time_seconds` metadata — if either is present, the file is sliced. Also passes the original human-readable filename when creating archives from the file manager print flow (previously stored the UUID library filename).
- **AMS Slot Shows Wrong Material for "Support for" Profiles** — Configuring an AMS slot with a filament profile like "PLA Support for PETG PETG Basic @Bambu Lab H2D 0.4 nozzle" set the slot material to PLA instead of PETG. The name parser iterated material types in order and returned the first match ("PLA"), ignoring that "PLA Support for PETG" means the filament type is PETG. Both the frontend `parsePresetName()` and backend `_parse_material_from_name()` now detect the "X Support for Y" naming pattern and extract the material after "Support for". The frontend also prefers the corrected parsed material over the stored `filament_type` (which may have been saved with the old parser during import).
- **Firmware Check Shows Wrong Version for H2D Pro** ([#584](https://github.com/maziggy/bambuddy/issues/584)) — H2D Pro printers showed firmware as out of date because the firmware check matched against the H2D firmware track instead of the H2D Pro track. The firmware check's model-to-API-key mapping only had display names (e.g., "H2D", "H2D Pro") but not SSDP device codes (e.g., "O1E", "O2D"). Added all known SSDP model codes to the firmware check mapping so raw device codes resolve to the correct firmware track.
- **Spurious Error Notifications During Normal Printing (0300_0002)** — Some firmware versions send non-zero `print_error` values in MQTT during normal printing (e.g., `0x03000002` → short code `0300_0002`). The `print_error` parser treated any non-zero value as a real error, appending it to `hms_errors` and triggering notifications — even though the printer was printing fine. All known real HMS error codes have their low 16 bits >= `0x4000` (`0x4xxx` = fatal, `0x8xxx` = warning/pause, `0xCxxx` = prompt). Values below `0x4000` are status/phase indicators, not faults. Now skips values where the error portion is below `0x4000` in both the `print_error` and `hms` array parsers.
- **Spool Auto-Assign Fails With Greenlet Error** ([#612](https://github.com/maziggy/bambuddy/issues/612)) — RFID spool auto-assignment logged `WARNING greenlet_spawn has not been called; can't call await_only() here` and silently failed. The `Spool.assignments` relationship was never eagerly loaded: when `auto_assign_spool()` created a new `SpoolAssignment` and called `db.add()`, SQLAlchemy resolved the FK back-populates synchronously (outside the async greenlet), triggering a lazy load on the uninitialized `spool.assignments` collection. The previous fix only covered `spool.k_profiles`. Now also initializes `spool.assignments = []` on newly created spools in `create_spool_from_tray()`, and adds `selectinload(Spool.assignments)` to both queries in `get_spool_by_tag()` for existing spools. Added `exc_info=True` to the error handlers for full tracebacks in future logs.
- **SpoolBuddy Link Tag Missing tag_type** — Linking an NFC tag to a spool via the SpoolBuddy dashboard's "Link to Spool" action only set `tag_uid` but left `tag_type` and `data_origin` empty, because it called the generic `updateSpool` API instead of the dedicated `linkTagToSpool` endpoint. The printer card's `LinkSpoolModal` already used `linkTagToSpool` correctly. Now uses `linkTagToSpool` with `tag_type: 'generic'` and `data_origin: 'nfc_link'`, which also handles conflict checks and archived tag recycling.
- **SpoolBuddy AMS Page Missing Fill Levels for Non-BL Spools** — AMS slots with non-Bambu Lab spools assigned to inventory didn't show fill level bars on the SpoolBuddy AMS page, even though the main printer card displayed them correctly. The SpoolBuddy AMS page only used the MQTT `remain` field (which is -1/unknown for non-BL spools), while the printer card had a fallback chain: Spoolman → inventory → AMS remain. Now fetches inventory spool assignments and computes fill levels from `(label_weight - weight_used) / label_weight`, falling back to AMS remain when no inventory assignment exists.
- **SpoolBuddy AMS Page Ext-R Slot Falsely Shown as Active When Idle** — On dual-nozzle printers (H2D), the Ext-R slot was incorrectly highlighted as active when the printer was idle. The ext-R tray has `id=255`, and the idle sentinel `tray_now=255` matched it via `trayNow === extTrayId`. The main printer card avoided this by clearing `effectiveTrayNow` to `undefined` when `tray_now=255`. Now guards against `tray_now=255` before any ext slot active check.
- **Printer Card Loses Info When Print Is Paused** ([#562](https://github.com/maziggy/bambuddy/issues/562)) — When a print was paused (via G-code pause command or user action), the printer card showed the print as finished — the progress bar, print name, ETA, layer count, and cover image all disappeared, replaced by the idle "Ready to Print" placeholder. The display conditions only checked for `state === 'RUNNING'` but not `'PAUSE'`, even though other parts of the same page (Skip Objects button, Stop/Resume controls) already handled both states correctly. Now shows print progress info for both `RUNNING` and `PAUSE` states, and the status label correctly reads "Paused" instead of the hardcoded "Printing" fallback.
- **SpoolBuddy "Assign to AMS" Slot Shows Empty Fields in Slicer** — After assigning a spool to an AMS slot via SpoolBuddy's "Assign to AMS" button, the slicer's slot overview showed the correct filament, but opening the slot detail card showed all fields empty/unselected. Two bugs: (1) the `assign_spool` backend called the cloud API with the raw `slicer_filament` value including its version suffix (e.g., `PFUS9ac902733670a9_07`), which returned a 404; the silent fallback sent the `setting_id` as `tray_info_idx` instead of the real `filament_id` (e.g., `PFUS9ac902733670a9` instead of `P4d64437`), and the slicer couldn't resolve the preset; (2) no `SlotPresetMapping` was saved, so Bambuddy's own ConfigureAmsSlotModal couldn't identify the active preset when reopened. Now strips version suffixes before the cloud lookup, resolves the real `filament_id` via the cloud API (with local preset and generic ID fallbacks), includes the brand name in `tray_sub_brands`, and saves the slot preset mapping from the frontend after assignment.
- **Virtual Printer Bind Server Fails With TLS-Enabled Slicers** ([#559](https://github.com/maziggy/bambuddy/issues/559)) — BambuStudio uses TLS on port 3002 for certain printer models (e.g. A1 Mini / N1), but the bind server only spoke plain TCP on both ports 3000 and 3002. The slicer's TLS ClientHello was rejected as an "invalid frame", preventing discovery and connection entirely. Port 3002 now uses TLS (using the VP's existing certificate), while port 3000 remains plain TCP for backwards compatibility. The proxy-mode bind proxy was also updated to use TLS termination on port 3002.
- **Queue Returns 500 When Cancelled Print Exists** ([#558](https://github.com/maziggy/bambuddy/issues/558)) — When a print was cancelled mid-print, the MQTT completion handler stored status `"aborted"` on the queue item, but the response schema only accepts `"pending"`, `"printing"`, `"completed"`, `"failed"`, `"skipped"`, or `"cancelled"`. Listing all queue items hit a Pydantic validation error on the invalid status, returning a 500 error. Filtering by a specific status (e.g. "pending") excluded the bad row and worked fine. Now normalises `"aborted"` to `"cancelled"` before storing. A startup fixup also converts any existing `"aborted"` rows.
- **Tests Send Real Maintenance Notifications** — Tests that call `on_print_complete(status="completed")` created background `asyncio` tasks (maintenance check, smart plug, notifications) that outlived the test's mock context. When the event loop processed these orphaned tasks, `async_session` was no longer patched and they queried the real production database — finding real printers with maintenance due and real notification providers, then sending real notifications. Tests now cancel spawned background tasks before the mock context exits.
- **Virtual Printer Config Changes Ignored Until Toggle Off/On** — Changing a virtual printer's mode (e.g. proxy → archive), model, access code, bind IP, remote interface IP, or target printer via the UI updated the database but the running VP instance was never restarted. `sync_from_db()` skipped any VP whose ID was already in the running instances dict without checking if config had changed. Now compares critical fields between the running instance and DB record and restarts the VP when a difference is detected.
- **Sidebar Navigation Ignores User Permissions** — All sidebar navigation items (Archives, Queue, Stats, Profiles, Maintenance, Projects, Inventory, Files) were visible to every user regardless of their role's permissions. Only the Settings item was permission-gated. Now each nav item is hidden when the user lacks the corresponding read permission (e.g., `archives:read`, `queue:read`, `library:read`). The Printers item remains always visible as the home page. Also added the missing `inventory:read|create|update|delete` permissions to the frontend Permission type (they existed in the backend but were absent from the frontend type definition).
- **Camera Button Clickable Without Permission & ffmpeg Process Leak** ([#550](https://github.com/maziggy/bambuddy/issues/550)) — Two camera issues in multi-user environments (e.g., classrooms with multiple printers). First, the camera button on the printer card was clickable even when the user's role lacked `camera:view` permission. Now disabled with a permission tooltip, matching the existing pattern for `printers:control` on the chamber light button. Second, ffmpeg processes (~240MB each) were never cleaned up after closing a camera stream. The `stop_camera_stream` endpoint called `terminate()` but never `wait()`ed or `kill()`ed, and HTTP disconnect detection in the streaming response only checked between frames — if the generator was blocked reading from ffmpeg stdout, disconnect was never detected (due to TCP send buffer masking the closed connection). Three fixes: (1) the stop endpoint now uses `terminate()` → `wait(2s)` → `kill()` → `wait()`; (2) each stream gets a background disconnect monitor task that polls `request.is_disconnected()` every 2 seconds independently of the frame loop, directly killing the ffmpeg process on disconnect; (3) a periodic cleanup (every 60s) scans `/proc` for any ffmpeg process with a Bambu RTSP URL (`rtsps://bblp:`) that isn't in an active stream and `SIGKILL`s it — catching orphans that survive app restarts or generator abandonment.
- **Windows Install Fails With "Syntax of the Command Is Incorrect"** ([#544](https://github.com/maziggy/bambuddy/issues/544)) — The `start_bambuddy.bat` Python hash verification used a multi-line `for /f "usebackq"` with a backtick-delimited command split across lines. Windows CMD cannot parse line breaks inside backtick-delimited `for /f` commands, causing "The syntax of the command is incorrect" immediately after downloading Python. The entire block was also redundant — it downloaded a separate checksum file from python.org and re-verified the hash, but `verify_sha256` had already checked the archive against the pinned hash on the previous line. Removed the duplicate verification block. Also had a secondary bug: always downloaded the `amd64` checksum even on `arm64` systems.
- **Queue Badge Shows on Incompatible Printers** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — The purple queue counter badge in the printer card header showed on all printers of the same model when a job was scheduled for "any [model]", even if the printer didn't have the matching filament color loaded. The `PrinterQueueWidget` (which shows "Clear Plate & Start") already filtered by filament type and color, but the badge count used the raw unfiltered queue length. Now applies the same filament compatibility filter to the badge count.
- **SpoolBuddy Daemon Can't Find Hardware Drivers** — The daemon's `nfc_reader.py` and `scale_reader.py` import `read_tag` and `scale_diag` as bare modules, but these files live in `spoolbuddy/scripts/` which isn't on Python's module search path. The systemd service sets `WorkingDirectory` to `spoolbuddy/` and runs `python -m daemon.main`, so only the `spoolbuddy/` and `daemon/` directories are on `sys.path`. Added `scripts/` to `sys.path` at daemon startup, resolved relative to the module file so it works regardless of install path. Also moved the `read_tag` import inside `NFCReader.__init__`'s try/except block — it was previously outside, so a missing module crashed the entire daemon instead of gracefully skipping NFC polling. Demoted hardware-not-available log messages from ERROR to INFO since missing modules are expected when hardware isn't connected.
- **SpoolBuddy Scale Tare & Calibration Not Applied** — The SpoolBuddy scale tare and calibrate buttons on the Settings page queued commands but never executed them. Five bugs in the chain: (1) the daemon received the `tare` command via heartbeat but never called `scale.tare()` — a comment said "need cross-task communication" but the ScaleReader was already available in the shared dict; (2) no API endpoint existed for the daemon to report the new tare offset back to the backend database, so tare results were lost; (3) when calibration values changed in heartbeat responses, the daemon updated its config object but never called `scale.update_calibration()`, so the ScaleReader kept using its initial values forever; (4) the heartbeat response that delivered the tare command still contained pre-tare calibration values, which immediately overwrote the new tare offset back to zero; (5) the `set-factor` endpoint computed `calibration_factor` using the DB `tare_offset`, which could be stale or zero if the tare hadn't persisted yet — producing a wildly wrong factor (e.g., 5000g displayed with empty scale). Added a `POST /devices/{device_id}/calibration/set-tare` endpoint and `update_tare()` API client method. The heartbeat loop now executes `scale.tare()` when the tare command is received, persists the result via the new endpoint, propagates calibration changes to the ScaleReader instance, and skips calibration sync on the heartbeat cycle that delivers a tare command. The calibration flow now captures the raw ADC at tare time and sends it alongside the loaded-weight ADC in step 2, so the factor is computed from the actual tare reference rather than the DB value — making calibration self-contained and independent of the tare persistence round-trip. The calibration weight input uses a compact touch-friendly numpad since the RPi kiosk has no physical keyboard.
- **A1 Mini Shows "Unknown" Status After MQTT Payload Decode Failure** ([#549](https://github.com/maziggy/bambuddy/issues/549)) — Some printer firmware versions (observed on A1 Mini 01.07.02.00) occasionally send MQTT payloads containing non-UTF-8 bytes. The `_on_message` handler called `msg.payload.decode()` (strict UTF-8), and the resulting `UnicodeDecodeError` was not caught — only `json.JSONDecodeError` was handled. The entire message was silently dropped, causing printer status to show "unknown", temperatures to read 0°C, and AMS data to disappear. Now catches `UnicodeDecodeError` and falls back to `decode(errors="replace")`, which substitutes invalid bytes with U+FFFD while keeping the JSON structure intact. Logs a warning for diagnostics.
- **H2C Dual Nozzle Variant (O1C2) Not Recognized** ([#489](https://github.com/maziggy/bambuddy/issues/489)) — The H2C dual nozzle variant reports model code `O1C2` via MQTT, but only `O1C` was in the recognized model maps. This caused the camera to use the wrong protocol (chamber image on port 6000 instead of RTSP on port 322) — the printer immediately closed the connection, producing a reconnect loop. Also affected model display names, chamber temperature support detection, linear rail classification, and virtual printer model mapping. Added `O1C2` to all model ID maps across backend and frontend.
- **Support Package Leaks Full Subnet IPs and Misdetects Docker Network Mode** — Three support package fixes. First, the network section included full subnet addresses (e.g., `192.168.192.0/24`); now masks the first two octets (`x.x.192.0/24`). Second, `network_mode_hint` used `len(interfaces) > 2` which always reported "bridge" on single-NIC hosts even with `network_mode: host`, because `get_network_interfaces()` excludes Docker infrastructure interfaces. Now checks for the presence of Docker interfaces (`docker0`, `br-*`, `veth*`) via `socket.if_nameindex()` — these are only visible when the container shares the host network namespace. Third, `developer_mode` was still null for most users because the MQTT `fun` field was only parsed inside the `print` key; some firmware versions send it at the top level of the payload. Now also checks top-level `fun`. Also added a `virtual_printers` section with mode, model, enabled/running status, and pending file count for each configured virtual printer.
- **SpoolBuddy Scale Calibration Lost After Reboot** — The SpoolBuddy daemon generated its device ID from the MAC address of whichever network interface `Path.iterdir()` returned first, but filesystem iteration order is non-deterministic. On different boots, the daemon could pick `eth0` (MAC ending `3100`) or `wlan0` (MAC ending `3102`), producing a different `device_id` each time. Since calibration values (`tare_offset`, `calibration_factor`) are stored per device ID in the backend database, a new ID meant registering as a brand-new uncalibrated device. Fixed by sorting network interfaces alphabetically before selection, ensuring the same interface (and thus the same device ID) is always chosen.
- **SpoolBuddy NFC Reader Fails to Detect Tags** — The PN5180 NFC reader had two polling issues. First, each `activate_type_a()` call that returned `None` (no tag) corrupted the PN5180 transceive state — subsequent calls silently failed even when a tag was physically present, making it impossible to detect tags placed after startup (only tags already on the reader during init were detected). Fixed by performing a full hardware reset (RST pin toggle + RF re-init, ~240ms) before every idle poll, giving a ~1.8 Hz effective poll rate. Second, after a successful SELECT the card stayed in ACTIVE state and ignored subsequent WUPA/REQA, causing false "tag removed" events after ~1 second. Fixed with a light RF off/on cycle (13ms) before each poll when a tag is present, resetting the card to IDLE for re-selection. Also added error-based auto-recovery (full hardware reset after 10 consecutive poll exceptions), periodic status logging every 60 seconds, and accurate heartbeat reporting of NFC/scale health.

### Improved
- **SpoolBuddy AMS Page Single-Slot Card Layout** — AMS-HT and external spool cards on the SpoolBuddy AMS page now use a responsive grid (2 cards per AMS card width) instead of auto-sized flex items, so they align with the regular AMS card columns above. Regular AMS cards no longer stretch vertically to fill available space on printers with fewer AMS units.
- **SpoolBuddy Scale Value Stabilization** — The SpoolBuddy daemon now suppresses redundant scale weight reports: only sends updates when the weight changes by ≥2g. Previously every 1-second report interval sent a reading regardless of change, and stability state flips (stable ↔ unstable) also triggered reports — when ADC noise kept the spread hovering around the 2g stability threshold, the flag toggled every cycle, forcing a report with a slightly different weight each time. Removed stability flipping as a report trigger (the stable flag is still included in each report for consumers). Also increased the NAU7802 moving average window from 5 to 20 samples (500ms → 2s) to smooth ADC noise. The frontend also applies a 3g display threshold as defense-in-depth.
- **SpoolBuddy TopBar: Online Printer Selection** — The printer selector in the SpoolBuddy top bar now only shows online printers and auto-selects the first online printer. If the currently selected printer goes offline, it automatically switches to the next available online printer. Also replaced the placeholder icon with the SpoolBuddy logo. Renamed the connection status label from "Online" to "Backend" for clarity.
- **SpoolBuddy Assign to AMS Redesign** — The "Assign to AMS" sub-modal (opened from the spool card) is now a full-screen overlay that reuses the `AmsUnitCard` component from the AMS page. Regular AMS units display in a 2-column grid with the same spool visualization, fill bars, and material labels. AMS-HT and external slots (Ext / Ext-L / Ext-R on dual-nozzle printers) appear in a compact horizontal row below. Clicking any slot auto-configures the filament via a single `assignSpool` API call — the backend handles both the DB assignment and MQTT configuration. The printer selector was removed from the modal since the top bar already provides printer selection. Dual-nozzle printers show L/R nozzle badges on each AMS unit.
- **Filament ID Conversion Utility** — Extracted filament_id ↔ setting_id conversion logic into a shared utility (`backend/app/utils/filament_ids.py`). The `assign_spool` endpoint now normalizes `slicer_filament` (which can be stored in either filament_id format like "GFL05" or setting_id format like "GFSL05_07") into the correct `tray_info_idx` and `setting_id` for the MQTT command. Previously `setting_id` was always sent as empty string, which could cause BambuStudio to not resolve the filament preset for the AMS slot.
- **Updates Card Separates Firmware and Software Settings** — The Updates card on the Settings page mixed printer firmware and Bambuddy software update toggles with no visual grouping. Now splits the card into two labeled sections ("Printer Firmware" and "Bambuddy Software") separated by a divider, making it clear which toggles control what.
- **SpoolBuddy Test Coverage** — Added integration tests for all 12 SpoolBuddy API endpoints (21 backend tests covering device registration/re-registration, heartbeat status and pending commands, NFC tag scan/match/removal, scale reading broadcast, spool weight calculation, and scale calibration including tare, set-factor, and zero-delta error handling) and component tests for the three main SpoolBuddy frontend components (20 frontend tests covering WeightDisplay weight formatting and status indicators, SpoolInfoCard spool info rendering and action callbacks, UnknownTagCard tag display, and TagDetectedModal open/close/escape behavior with known and unknown spool views).
- **Cleanup Obsolete Settings** — The startup migration now deletes orphaned settings keys from the database that are no longer used by the application (e.g., `slicer_binary_path` from earlier slicer integration research).
- **Added HUF Currency** ([#579](https://github.com/maziggy/bambuddy/issues/579)) — Added Hungarian Forint (HUF, Ft) to the supported currencies list for filament cost tracking.
- **FTP Upload Progress & Speed** — Reduced FTP upload chunk size from 1MB to 64KB for smoother progress reporting — at typical printer FTP speeds (~50-100KB/s) the progress bar now updates roughly every second instead of appearing stuck for 20+ seconds between jumps. Removed the post-upload `voidresp()` wait for all printer models (previously only skipped for A1); H2D printers delay the FTP 226 acknowledgment by 30+ seconds after data transfer completes, causing a long hang at 100%. The data is already on the SD card once the transfer finishes. Also added transfer speed logging (KB/s) and PASV+TLS handshake timing to help diagnose slow connections.
- **Wider Print & Schedule Modals** — Increased the Print and Schedule Print modal width from 512px to 672px to better accommodate long filament profile names (e.g., "PLA Support for PETG PETG Basic @Bambu Lab H2D 0.4 nozzle").

## [0.2.1.1] - 2026-02-28

### Fixed
- **H2C Dual Nozzle Variant (O1C2) Not Recognized** ([#489](https://github.com/maziggy/bambuddy/issues/489)) — The H2C dual nozzle variant reports model code `O1C2` via MQTT, but only `O1C` was in the recognized model maps. This caused the camera to use the wrong protocol (chamber image on port 6000 instead of RTSP on port 322) — the printer immediately closed the connection, producing a reconnect loop. Also affected model display names, chamber temperature support detection, linear rail classification, and virtual printer model mapping. Added `O1C2` to all model ID maps across backend and frontend.
- **Sidebar Navigation Ignores User Permissions** — All sidebar navigation items (Archives, Queue, Stats, Profiles, Maintenance, Projects, Inventory, Files) were visible to every user regardless of their role's permissions. Only the Settings item was permission-gated. Now each nav item is hidden when the user lacks the corresponding read permission (e.g., `archives:read`, `queue:read`, `library:read`). The Printers item remains always visible as the home page. Also added the missing `inventory:read|create|update|delete` permissions to the frontend Permission type (they existed in the backend but were absent from the frontend type definition).
- **Camera Button Clickable Without Permission & ffmpeg Process Leak** ([#550](https://github.com/maziggy/bambuddy/issues/550)) — Two camera issues in multi-user environments (e.g., classrooms with multiple printers). First, the camera button on the printer card was clickable even when the user's role lacked `camera:view` permission. Now disabled with a permission tooltip, matching the existing pattern for `printers:control` on the chamber light button. Second, ffmpeg processes (~240MB each) were never cleaned up after closing a camera stream. The `stop_camera_stream` endpoint called `terminate()` but never `wait()`ed or `kill()`ed, and HTTP disconnect detection in the streaming response only checked between frames — if the generator was blocked reading from ffmpeg stdout, disconnect was never detected (due to TCP send buffer masking the closed connection). Three fixes: (1) the stop endpoint now uses `terminate()` → `wait(2s)` → `kill()` → `wait()`; (2) each stream gets a background disconnect monitor task that polls `request.is_disconnected()` every 2 seconds independently of the frame loop, directly killing the ffmpeg process on disconnect; (3) a periodic cleanup (every 60s) scans `/proc` for any ffmpeg process with a Bambu RTSP URL (`rtsps://bblp:`) that isn't in an active stream and `SIGKILL`s it — catching orphans that survive app restarts or generator abandonment.
- **Windows Install Fails With "Syntax of the Command Is Incorrect"** ([#544](https://github.com/maziggy/bambuddy/issues/544)) — The `start_bambuddy.bat` launcher had Unix (LF) line endings instead of Windows (CRLF). When a user's git config has `core.autocrlf=false` or `input`, the file is checked out with LF endings and `cmd.exe` cannot parse it. Added a `.gitattributes` file that forces CRLF for all `.bat` files regardless of git config.
- **Queue Badge Shows on Incompatible Printers** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — The purple queue counter badge in the printer card header showed on all printers of the same model when a job was scheduled for "any [model]", even if the printer didn't have the matching filament color loaded. The `PrinterQueueWidget` (which shows "Clear Plate & Start") already filtered by filament type and color, but the badge count used the raw unfiltered queue length. Now applies the same filament compatibility filter to the badge count.
- **A1 Mini Shows "Unknown" Status After MQTT Payload Decode Failure** ([#549](https://github.com/maziggy/bambuddy/issues/549)) — Some printer firmware versions (observed on A1 Mini 01.07.02.00) occasionally send MQTT payloads containing non-UTF-8 bytes. The `_on_message` handler called `msg.payload.decode()` (strict UTF-8), and the resulting `UnicodeDecodeError` was not caught — only `json.JSONDecodeError` was handled. The entire message was silently dropped, causing printer status to show "unknown", temperatures to read 0°C, and AMS data to disappear. Now catches `UnicodeDecodeError` and falls back to `decode(errors="replace")`, which substitutes invalid bytes with U+FFFD while keeping the JSON structure intact. Logs a warning for diagnostics.

## [0.2.1] - 2026-02-27

### Fixed
- **Timezone-Aware Datetime Comparisons Crash With SQLite** — The 0.2.1 timezone fix (`datetime.now(timezone.utc)`) produced aware datetimes, but SQLAlchemy's SQLite `DateTime` columns return naive datetimes on read. Any Python-side comparison between the two raised `TypeError: can't subtract offset-naive and offset-aware datetimes`, crashing the maintenance overview endpoint and potentially 7 other code paths (API key expiration, smart plug auto-off, power alert cooldown, runtime tracking, print scheduling, and timelapse matching). Added `tzinfo is None` guards before all database datetime comparisons.
- **FTP Proxy Cannot Bind to Port 990 in Docker** — The `cap_add: NET_BIND_SERVICE` in docker-compose.yml didn't reliably propagate to the Python process when running as a non-root user (`user:` directive), depending on the container runtime's ambient capability support. Now sets the file capability directly on the Python binary in the Dockerfile via `setcap`, which the kernel honors regardless of runtime configuration.
- **AMS History Chart Shows Wrong Time Range** ([#535](https://github.com/maziggy/bambuddy/issues/535)) — The AMS temperature/humidity chart X axis was fitted to only the data points present (`dataMin`/`dataMax`), not the selected time window. When the printer was offline for part of the period, shorter views (e.g., 6h) appeared compressed to only the portion with data (e.g., 1.5h). Now pins the X axis domain to the full requested time range (e.g., now−6h to now), pads the data edges so the line extends across the full window, and connects through null values so the chart always shows a continuous line.
- **"Clear Plate & Start Next" Ignores Filament Override Color** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — When a print was queued to "any printer" with a filament color override (e.g., white PETG), the "Clear Plate & Start Next" button appeared on all printers of the matching model that had the correct filament *type*, regardless of *color*. A printer with blue PETG would show the button for a white PETG job. The backend scheduler already correctly rejected color mismatches, but the frontend `PrinterQueueWidget` only checked `required_filament_types` (type only) and ignored `filament_overrides` (type + color). Now passes loaded filament type+color pairs from AMS/vt_tray status to the widget and filters queue items against override colors, mirroring the backend's `_count_override_color_matches()` logic.
- **Queue Empty After Container Restart Due to Uncheckpointed WAL** ([#523](https://github.com/maziggy/bambuddy/issues/523)) — The print queue appeared empty after a Docker container restart until a filter was applied. SQLite WAL mode keeps uncommitted data in a separate `-wal` file, but the shutdown handler never checkpointed the WAL back into the main database or disposed of engine connections. If the container was stopped or crashed, the WAL could contain partial schema migrations or uncommitted data, causing inconsistent query results on restart. Deleting the `-wal` and `-shm` files was the only workaround. Now runs `PRAGMA wal_checkpoint(TRUNCATE)` and disposes the engine on shutdown, ensuring all data is flushed to the main database file before exit.
- **Virtual Printer Queue Sends Wrong Plate ID and Ignores AMS Mapping** ([#529](https://github.com/maziggy/bambuddy/issues/529)) — Files sent to a virtual printer in queue mode had two issues. First, `plate_id` was always `1`, generating the wrong MQTT gcode path for multi-plate 3MF files (HMS error 0500_4003). Now extracts the plate index from the 3MF's `slice_info.config`. Second, `ams_mapping` was never computed for printer-specific queue items (VP assigned to a particular printer), so the printer always used the first AMS slot regardless of which filament the 3MF required. The scheduler now computes AMS mapping for all queue items that lack one, not just model-based assignments.
- **Unnecessary Target Model Selector on "Any" Tab** ([#528](https://github.com/maziggy/bambuddy/issues/528)) — When scheduling a print to "Any {model}", a redundant "Target Model" dropdown appeared even though the G-code is already sliced for a specific printer model. Changing the target model would lead to print failures. The dropdown is now hidden when the sliced model is known (the tab label already shows "Any {model}"). It still appears as a fallback for legacy files without model metadata.
- **"Clear Plate & Start Next" Button Shown on Printers Without Correct Filament** ([#527](https://github.com/maziggy/bambuddy/issues/527)) — When a print job was queued for "any printer" of a model (e.g., "any H2S"), the "Clear Plate & Start Next" button appeared on ALL printers of that model, including those without the required filament loaded. Clicking it on a printer without the right filament would start a print that fails. The `PrinterQueueWidget` now filters queue items by filament compatibility — it checks the printer's loaded filament types (from AMS and external spools) against the queue item's `required_filament_types` and only shows items the printer can actually print. If no compatible items exist, the widget is hidden.
- **Manual Spool Weight Overwritten by AMS Auto-Sync** ([#525](https://github.com/maziggy/bambuddy/issues/525)) — When a user manually entered a spool weight (via UI or API), the value was overwritten by the automatic AMS remain% sync that runs on every MQTT update. The AMS remain% is integer-only (~10g resolution for 1kg spool) and can't match precise manual entries. Added a `weight_locked` flag that is automatically set when `weight_used` is explicitly updated via the API. Locked spools are skipped by both the automatic AMS remain% sync and the manual force-sync endpoint. The usage tracker (3MF/gcode delta tracking) is unaffected. Users can re-enable AMS sync by setting `weight_locked: false`.
- **Inconsistent Print Cost on Reprints** ([#505](https://github.com/maziggy/bambuddy/issues/505)) — Reprinting the same model produced different costs each time (e.g., £0.77, £1.54, £2.03 for the same print). Three independent code paths wrote to `archive.cost` with conflicting strategies: the usage tracker summed ALL historical `SpoolUsageHistory` rows for the archive (including rows from previous reprints), and a separate `add_reprint_cost` method added yet another full print's cost on top. Removed the redundant `add_reprint_cost` path entirely and changed the usage tracker to compute cost only from the current print session's results instead of querying all historical rows. `archive.cost` now always reflects the cost of a single print.
- **Timestamps Off by Timezone Offset in Non-UTC Docker Containers** ([#504](https://github.com/maziggy/bambuddy/issues/504)) — All backend timestamps used `datetime.now()` (server local time) or the deprecated `datetime.utcnow()`. The frontend's `parseUTCDate()` assumes timestamps without timezone indicators are UTC and appends `'Z'`, so when the container's timezone wasn't UTC, every stored timestamp was off by the timezone offset. Replaced all database and comparison timestamps with `datetime.now(timezone.utc)` across 16 backend files (~80 call sites). On the frontend, replaced 13 `new Date(backendTimestamp)` calls with `parseUTCDate()` across 8 files to correctly interpret UTC timestamps. Cosmetic timestamps (filenames, user-facing local time formatting) are intentionally left as local time.
- **"Power Off Printer" Option Not Gated by Control Permission** ([#500](https://github.com/maziggy/bambuddy/issues/500)) — The "Power off printer when done" checkbox in the print modal and the auto power off toggle in the bulk edit modal were accessible to all users regardless of permissions. Users without the `printers:control` permission can now no longer enable auto power off — the checkbox and tri-state toggle are disabled and visually dimmed.
- **Created Admin Users Can't See Settings Button** ([#503](https://github.com/maziggy/bambuddy/issues/503)) — The sidebar hid the Settings link based on a hardcoded `role === 'user'` check instead of the actual `settings:read` permission, so newly created admin users who had the permission still couldn't see the button. Also, after login the auth state was set directly from the login response instead of re-fetching the full auth status, which could miss permission data. Now uses `hasPermission('settings:read')` for the sidebar check and calls `checkAuthStatus()` after login to load the complete user state including permissions.
- **"Open in Slicer" Fails for Filenames Containing Special Characters** — Filenames with `/`, `\`, `?`, or `#` (e.g., `Abzweigdose/Verteilerdose 70mm`) caused the slicer protocol handler to fail. The filename is placed in the download URL path and `encodeURIComponent`-encoded, but BambuStudio and OrcaSlicer call `url_decode()` on the entire protocol handler URL before downloading. This decoded `%2F` back to `/`, creating extra path segments that resulted in a 404. The URL filename is purely cosmetic (the backend resolves files by archive ID, not filename), so now sanitizes `/`, `\`, `?`, and `#` to `_` in slicer download URLs.
- **"Queue to Any Printer" Ignores Filament Color Override** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — When scheduling a print to "any printer" with a filament color override, the scheduler picked a printer with the correct filament type but wrong color. `_find_idle_printer_for_model()` validated only filament type (via `_get_missing_filament_types()`), while color matching (`_count_override_color_matches()`) was used only for ranking candidates, not filtering them. A printer with 0 color matches was still selected if it had the right types. Now requires at least 1 color match when filament overrides specify colors — printers with 0 matches are skipped and added to the "waiting for filament" reason instead of being treated as valid candidates.
- **Virtual Printer Queue Mode Doesn't Assign Printer** ([#518](https://github.com/maziggy/bambuddy/issues/518)) — Files sent to a virtual printer in "print queue" mode were added to the queue with no printer assigned, requiring manual assignment. The `_add_to_print_queue()` method always created queue items with `printer_id=None` and no `target_model`. Now assigns the virtual printer's `target_printer_id` if configured, or falls back to the VP's model (e.g., P1S, X1C) as `target_model` for "Any Printer" scheduling.
- **Settings Text Fields Reset While Typing** — Text input fields on the Settings page (MQTT broker hostname, HA URL, tokens, etc.) reset mid-typing because the auto-save `onSuccess` handler overwrote `localSettings` with the server response, discarding characters typed during the save request. Removed the stale state overwrite so in-progress user input is preserved.

### Improved
- **Queue API Returns More Print Metadata** ([#524](https://github.com/maziggy/bambuddy/issues/524)) — The `GET /api/v1/queue` and `GET /api/v1/queue/{id}` endpoints now include `filament_type`, `filament_color`, `layer_height`, `nozzle_diameter`, and `sliced_for_model` from the archive or library file. Previously these fields were only available via the archive endpoints, requiring an extra API call.
- **Spool Form Profile Dropdown Truncates Long Names** ([#534](https://github.com/maziggy/bambuddy/issues/534)) — Long filament profile names (e.g., "Polymaker Panchroma Matte PLA 0.4 nozzle P1S") were truncated in the spool creation form's preset dropdown because filament ID codes displayed alongside each name consumed horizontal space. Removed the inline filament codes from dropdown items (the selected code is still shown below the input after selection) and widened the modal from `max-w-lg` to `max-w-xl` to give profile names more room.

## [0.2.1b3] - 2026-02-23

### Fixed
- **Print Bed Cooled Notification Never Triggers** ([#497](https://github.com/maziggy/bambuddy/issues/497)) — The bed cooldown monitor (which polls bed temperature after a print and sends a notification when it drops below the configured threshold) was defined at the end of the `on_print_complete` callback, after an early `return` that exits when no archive is found for the print. Prints started from BambuStudio or the printer's touchscreen typically have no archive in Bambuddy, so the function returned before the bed cooldown task was ever created. Moved the bed cooldown monitor to before the archive lookup early-return so it fires for all completed prints regardless of archive state. Also hardened the temperature dict check from truthiness (`if status.temperatures:`) to type check (`isinstance(status.temperatures, dict)`) to avoid false negatives on empty dicts.
- **IP Addresses Not Redacted From Support Bundle Logs** — The `_sanitize_log_content()` function redacted emails, serials, and credentials but left raw IPv4 addresses in log output. Now adds known printer IPs to the sensitive string list for exact matching, and applies an IPv4 regex that replaces addresses with `[IP]` while preserving firmware version strings (which use leading-zero octets like `01.09.01.00`). Updated the system info page privacy disclaimer to list IP addresses as redacted.
- **"Unknown stage (74)" on H2D During Print Preparation** — The H2D firmware reports `stg_cur=74` during print preparation, but this stage was not in the stage name lookup table (which went up to 66, sourced from BambuStudio). Now maps stage 74 to "Preparing". Also added stage 77 ("Preparing AMS") which was present in BambuStudio but missing from the lookup.
- **Wrong Documentation Link for "Lubricate Carbon Rods" on P2S** ([#490](https://github.com/maziggy/bambuddy/issues/490)) — The "Lubricate Carbon Rods" maintenance task linked to the belt tension wiki page instead of the XYZ axis lubrication page for P2S printers.
- **External Spool Mapping Inverted on H2C** ([#492](https://github.com/maziggy/bambuddy/issues/492)) — On H2C dual-nozzle printers, printing from the right nozzle's external spool (Ext-R) incorrectly highlighted the left external spool (Ext-L) as active. The H2C firmware reports `tray_now=254` generically for both external spools, so the frontend's direct ID comparison (`effectiveTrayNow === extTrayId`) always matched Ext-L (id=254). Now uses `active_extruder` on dual-nozzle printers to determine which external spool is active: extruder 1 (left) → Ext-L, extruder 0 (right) → Ext-R.
- **External Spool Assignments Lost on Restart** ([#493](https://github.com/maziggy/bambuddy/issues/493)) — Filament spool assignments on external spool holders (Ext-L / Ext-R) were silently deleted every time AMS data changed, including on container restart. The `on_ams_change` stale-assignment cleanup searched only AMS unit data for matching trays, but external spools live in `vt_tray` (a separate MQTT field). Since `_find_tray_in_ams_data` never found them, external assignments were always marked as stale and removed. Now looks up external spool assignments (`ams_id=255`) in the printer's `vt_tray` data instead, and keeps the assignment if `vt_tray` data hasn't arrived yet.
- **Developer Mode Detection Always Reports Null** — The MQTT `fun` field is an integer in the JSON payload, but the parser used `int(value, 16)` which requires a string argument. This raised `TypeError` on every message, silently caught by the exception handler, so `developer_mode` was never set. Now handles both integer and hex string formats.
- **Filament Fill Level Wrong in Hover Card / Missing for External Spools** ([#496](https://github.com/maziggy/bambuddy/issues/496)) — Three related fill level display bugs on the printer card. First, external spool slots (vt_tray) were missing the AMS `remain` fallback entirely — `extEffectiveFill` only checked Spoolman and inventory, falling through to `null` even when the printer reported a valid fill percentage. Now includes the same AMS remain fallback as regular and AMS-HT slots. Second, when fill level was unknown (`null`), the AMS slot visual showed a full-width gray bar (appearing "full") while the hover card showed "—" (appearing "empty") — confusing users into thinking the printer card and hover card disagreed. Removed the misleading gray fallback bar from all three slot types; the empty fill bar track now consistently indicates "unknown" in both views. Third, the fill level priority chain always preferred AMS `remain` over Spoolman and inventory data, even when those sources were more accurate (e.g., spools migrated from Spoolman to internal inventory, or spools with accurate usage tracking). Reversed the priority to Spoolman → Inventory → AMS remain, and fixed `fillSource` to correctly reflect the actual data source used (was always reporting `'ams'` even when Spoolman or inventory provided the value via the fallback chain when `remain` was -1).
- **File Manager Rename Doesn't Update Displayed Name** ([#460](https://github.com/maziggy/bambuddy/issues/460)) — Renaming a file in the File Manager updated the `filename` field but not `file_metadata.print_name`, which the UI uses as the primary display name. Since `print_name` is extracted from inside the 3MF at upload time, it always took precedence over the renamed `filename`. The rename endpoint now also updates `print_name` in the file metadata when present.
- **Finish Photo Not Captured When Archive Has No Source 3MF** ([#484](https://github.com/maziggy/bambuddy/issues/484)) — When a print completed but the 3MF source file wasn't downloaded from the printer (e.g. FTP download failure), the archive's `file_path` was null. The finish photo capture silently skipped because it derived the save directory from `file_path`. Now falls back to `archive/{id}/` so the photo is captured regardless.

### New Features
- **Filament Override for Model-Based Queue** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — When scheduling a print to "any printer" (model-based assignment), you can now override the 3MF's original filament choices. A new section in the print modal shows the filaments required by the sliced file and lets you swap each slot to any compatible filament loaded across printers of the selected model. The scheduler matches against the overridden type and color instead of the original 3MF values, preferring printers with exact color matches. On dual-nozzle printers (H2D), the override dropdown only shows filaments on the correct extruder for each slot. New `GET /printers/available-filaments` endpoint aggregates loaded filaments across all active printers of a given model. Backend stores overrides as a JSON column on the queue item and applies them at scheduling time by merging into filament requirements before AMS mapping. Translations added for all 6 locales (en, de, fr, it, ja, pt-BR).

## [0.2.1b2] - 2026-02-21

### Fixed
- **Wrong AMS Unit Displayed With Dual AMS on P2S** ([#420](https://github.com/maziggy/bambuddy/issues/420)) — On P2S printers with two AMS units, the UI highlighted the wrong AMS when printing from the second unit (e.g., printing from AMS-B slot 2 but AMS-A slot 2 was shown as active). The P2S firmware sends local slot IDs (0-3) in `tray_now`, not global tray IDs — contrary to the previous assumption that all single-nozzle printers report global IDs. Filament usage tracking was unaffected because it uses the MQTT `mapping` field (snow-encoded with correct AMS hardware IDs). The display now cross-references `tray_now` with the MQTT mapping field to resolve the correct AMS unit when multiple AMS units are detected via `ams_exist_bits`. Falls back to the raw value when no mapping is available (e.g., manual filament load outside of a print) or when the mapping is ambiguous.
- **PCTG Filament Misidentified as PC** ([#478](https://github.com/maziggy/bambuddy/issues/478)) — Selecting "Generic PCTG" as a filament profile defaulted to PC material. The spool form's material parser listed PC before PCTG and used substring matching (`indexOf`), so "PCTG" matched "PC" first. The AMS slot configuration and local profiles views were also missing PCTG from their known material types. Additionally, the temperature range logic used `includes('PC')` which matched PCTG and assigned PC temperatures (260-300°C) instead of PETG-range temperatures (220-260°C). Fixed by reordering PCTG before PC in the spool form parser, adding PCTG to all material type arrays, and adding an exact-match temperature case for PCTG.
- **Phantom Prints From Lingering SD Card Files** ([#477](https://github.com/maziggy/bambuddy/issues/477)) — Prints could restart without user input hours after completing, because uploaded gcode files survived on the printer's SD card and were auto-started on firmware restart. Three bugs allowed files to linger. First, the post-print SD card cleanup retry loop always broke after the first attempt regardless of success, because `delete_file_async` catches errors internally and returns `False` instead of raising — the `except` retry branch never executed. Fixed by only breaking on successful delete and retrying with a 2-second delay on failure. Second, when `start_print()` failed after uploading a file (in both the background dispatcher and print scheduler), the uploaded file was never cleaned up since `on_print_complete` never fires for a print that never started. Now deletes the uploaded file on a best-effort basis when `start_print()` returns `False`. Third, cleanup failure logging was at `DEBUG` level, making failures invisible in normal operation — escalated to `WARNING`.
- **Non-Actionable HMS Errors Triggering Notifications** ([#470](https://github.com/maziggy/bambuddy/issues/470)) — Infrastructure and auth-related HMS error codes (like `0500_0007` "MQTT command verification failed") were triggering printer error notifications even though they don't indicate actual print problems. For example, a device with incorrect bind settings sending unauthorized MQTT commands caused repeated false-alarm nozzle/extruder error notifications with camera snapshots of perfectly fine prints. Now suppresses notifications for known non-actionable error codes: `0500_0007` (MQTT auth failure), `0500_4001` (Bambu Cloud connection failure), and `0500_400E` (print cancelled by user).
- **Support Bundle Leaking Personal Data** ([#473](https://github.com/maziggy/bambuddy/issues/473)) — The support bundle's log sanitizer only used regex patterns, which can't detect arbitrary user-chosen strings like printer names and usernames. Now queries the database for known sensitive values (printer names, serial numbers, auth usernames, Bambu Cloud email) and does exact-string replacement before the regex pass. Serial number regex no longer leaks the first 3 characters (was using a capture group for partial redaction). Tasmota smart plug credentials embedded in URLs (`http://user:pass@host`) were logged verbatim by httpx; now uses httpx's `auth` parameter for HTTP Basic auth so credentials never appear in the URL. Added `username` and `path` to the settings key filter to redact `smtp_username` and `slicer_binary_path` from the support info JSON. A URL credentials regex provides defense-in-depth for any remaining `user:pass@` patterns in logs. IP addresses are no longer redacted from the bundle as they are needed for connectivity debugging. Updated the frontend privacy disclaimer and wiki documentation to reflect the new behavior.
- **Spool Usage Lost When Spool Runs Empty Mid-Print** ([#459](https://github.com/maziggy/bambuddy/issues/459)) — When a spool ran empty during a print and the AMS auto-switched to a backup spool, two problems caused incorrect tracking. First, the `on_ams_change` handler eagerly deleted the empty spool's `SpoolAssignment` record (fingerprint mismatch), so `on_print_complete` found nothing and silently dropped usage — fixed by snapshotting all spool assignments at print start into the `PrintSession`. Second, even with the snapshot fix, the entire print's filament weight was attributed to the original spool (100%/0% split) because `_track_from_3mf()` only knew about the tray loaded at print start. Now tracks tray changes during the print via `tray_change_log` on `PrinterState`, recording each tray switch with its layer number. At print completion, the usage tracker splits the 3MF weight across trays using per-layer gcode data for precise segment boundaries, with a linear layer-ratio fallback when gcode data isn't available. The last segment always receives the remainder to prevent rounding drift.
- **K-Profile Response Race Condition Crash** ([#462](https://github.com/maziggy/bambuddy/issues/462)) — An unsolicited or late K-profile MQTT response could crash the MQTT handler with `AttributeError: 'NoneType' object has no attribute 'set'`. The MQTT callback thread checked `self._pending_kprofile_response` (not None) at line 2698, but between that check and the `.set()` call, the asyncio thread's `finally` block in `get_kprofiles()` could clear the attribute to `None` after a timeout — a classic TOCTOU race. Fixed by capturing the event reference in a local variable before the check.
- **Queue Stuck on "Busy" for "Any Model" Jobs** ([#435](https://github.com/maziggy/bambuddy/issues/435)) — When a print was queued with "Any [Model]" (e.g., "Any P1S"), it was created with `printer_id=NULL` and `target_model="P1S"`. After the assigned printer finished, the queue widget queried only for items matching `printer_id=X`, missing the next pending model-based item (`printer_id IS NULL`). With no next item found, the "Clear Plate & Start Next" button never appeared, leaving the scheduler stuck reporting "Busy". The queue API now accepts an optional `target_model` parameter; when combined with `printer_id`, it uses OR logic to also return unassigned items whose `target_model` matches the printer's model. The frontend passes the printer's model through to this query. Additionally, the backend now resolves the printer's model server-side from the database when the frontend doesn't provide `target_model` (e.g., when the printer was added without selecting a model), ensuring the OR logic works regardless of whether the client knows the printer's model.
- **Queue "Any Model" Jobs Stuck in "Waiting" After Plate Clear** ([#435](https://github.com/maziggy/bambuddy/issues/435)) — After the queue visibility fix above, "Any Model" jobs were correctly assigned to an idle printer but immediately crashed with `'>=' not supported between instances of 'str' and 'int'` when computing AMS filament mapping. MQTT raw data returns AMS unit and tray IDs as strings, but `_build_loaded_filaments()` compared them to integers without casting. The crash prevented the assignment from committing, so the scheduler retried every 30 seconds in an infinite loop. Cast `ams_id` and `tray_id` to `int()` to match the pattern already used for external spool IDs.
- **SD Card Cleanup After Print Never Runs** ([#374](https://github.com/maziggy/bambuddy/issues/374)) — The post-print SD card cleanup (which deletes uploaded gcode from the printer root to prevent phantom prints on power cycle) used `printer_manager.get_printer()`, which returns a `PrinterInfo` with only `name` and `serial_number`. Accessing `.ip_address`, `.access_code`, and `.model` raised `AttributeError`, silently caught by the outer exception handler. Replaced with a DB query for the `Printer` model, matching the pattern used everywhere else in `on_print_complete()`.
- **Finish Photo Not Shown on Archives for BambuStudio Prints** ([#474](https://github.com/maziggy/bambuddy/issues/474)) — When a print was started from BambuStudio (not Bambuddy), the auto-archive had an empty `file_path`. The finish photo was saved correctly to `data/photos/`, but the photo serving endpoint resolved the path as `(base_dir / "").parent / "photos/"` which evaluates to `base_dir.parent/photos/` — one directory level too high. The photo existed on disk but the API returned 404. Fixed the path resolution in `get_photo`, `upload_photo`, and `delete_photo` to use `base_dir / Path(file_path).parent` (same pattern as the save code), which correctly resolves to `base_dir/photos/` when `file_path` is empty.
- **Archive Endpoints Crash With "Is a directory" for BambuStudio Prints** ([#475](https://github.com/maziggy/bambuddy/issues/475)) — When a print was started from BambuStudio (not Bambuddy), the 3MF file is transient on the printer and FTP download fails, creating a fallback archive with `file_path=""`. The archive endpoints used `Path.exists()` to check if the 3MF file was available, but `settings.base_dir / ""` resolves to the base directory itself — which `exists()` reports as True. Subsequent `ZipFile()` calls then failed with `[Errno 21] Is a directory`. Replaced all `.exists()` checks on archive file paths with `.is_file()` across 15 locations in the archive routes and 1 in the main module. Also added a `file_path` truthiness guard for finish photo capture to prevent saving photos under the base directory when the archive has no file path.
- **AMS Slot Auto-Configuration Falls Back to Generic Instead of Spool's Slicer Preset** ([#479](https://github.com/maziggy/bambuddy/issues/479)) — When assigning a spool with a custom slicer preset (e.g., PFUS* cloud-synced profiles from BambuStudio) to an AMS slot, the slot was always configured with a generic Bambu filament ID (e.g., "Generic ABS" / GFB99) instead of the spool's actual preset. Two bugs caused this. First, all PFUS* IDs were blanket-rejected as "user-local IDs unknown to other slicers" and replaced with generic IDs — but PFUS presets are cloud-synced custom profiles that the printer understands. Second, the slot-reuse logic preserved generic fallback IDs (GFB99, GFL99, etc.) as if they were specific presets: once a slot was set to generic, every subsequent same-material assignment reused it, making generic IDs "sticky". Fixed priority order: (1) spool's own `slicer_filament` if set (including PFUS*/P* custom presets), (2) reuse slot's existing preset only if it's a specific non-generic ID for the same material, (3) generic Bambu filament ID as last resort. Both `assign_spool` and `configure_ams_slot` code paths are fixed.
- **ntfy Notifications Fail With "Illegal header value"** ([#466](https://github.com/maziggy/bambuddy/issues/466)) — When sending ntfy notifications with image attachments (progress, error events), the message body was placed in an HTTP `Message` header. Multi-line messages (e.g., printer name + remaining time) contain newline characters, which are illegal in HTTP headers. Test notifications worked because they are single-line with no image. Now escapes newlines to literal `\n` in the header, which ntfy interprets and renders as actual line breaks. Additionally, ntfy servers with attachments disabled rejected thumbnail uploads with "attachments not allowed" (HTTP 400 / code 40014), causing the entire notification to fail. Now automatically retries without the image when the server doesn't support attachments.
- **Inventory Date Format Ignores Settings** ([#463](https://github.com/maziggy/bambuddy/issues/463)) — The inventory page used a local `formatDate()` that hardcoded the `en-GB` locale, always displaying dates in a fixed format regardless of the date format setting. Now fetches the `date_format` setting and uses the shared `formatDateInput()` utility which formats as MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, or browser locale based on the user's choice.
- **Inventory Location Shows Garbled Characters for AMS-HT Slots** ([#463](https://github.com/maziggy/bambuddy/issues/463)) — The inventory location column computed slot letters via `String.fromCharCode(65 + ams_id)`, which produced accented characters (e.g., `Á`) for AMS-HT units (ams_id ≥ 128). Now uses the shared `formatSlotLabel()` utility which correctly handles AMS-HT and external spool slots.

### New Features
- **Bulk Spool Addition & Stock Spools** ([#480](https://github.com/maziggy/bambuddy/issues/480)) — Inventory enhancements for managing large filament collections. **Quick Add mode**: a toggle on the spool form that shows only material (required), brand, subtype (both optional), color, label weight, and quantity — ideal for inventorying filament without a specific slicer profile ("stock" spools). The quantity field (1–100) only appears in Quick Add mode and creates multiple identical spools in one transaction via `POST /inventory/spools/bulk`. Stock spools are computed (no database migration) — any spool without a `slicer_filament` is displayed with an amber "Stock" badge. A new filter (All / Stock / Configured) on the inventory page lets you filter by stock status. **Group similar spools**: a "Group" toggle in the inventory toolbar visually collapses identical unused/unassigned spools into a single expandable row or card with a count badge (e.g., "5 identical spools"). Grouping key uses material, subtype, brand, color, and label weight. Used or AMS-assigned spools always appear individually. Group state persists to localStorage. The Stock column is available but hidden by default in column settings. Translations added for all 6 locales (en, de, fr, it, ja, pt-BR).
- **Filament Cost Tracking** ([#454](https://github.com/maziggy/bambuddy/pull/454), [#452](https://github.com/maziggy/bambuddy/issues/452)) — Track per-spool filament costs and see cost breakdowns for every print. Each spool can have a `cost_per_kg` value; when a print completes, the usage tracker calculates the cost from actual filament consumption and stores it in the usage history. Archive costs are automatically aggregated from spool usage records. A global `default_filament_cost` setting (Settings → Filament) provides a fallback when spools don't have individual costs set. The print modal shows a real-time cost preview based on loaded filaments. Archive cards display the total cost. The inventory table includes a sortable cost/kg column. The recalculate-costs endpoint can retroactively update all archive costs when filament prices change. Contributed by @Keybored02.
- **Background Print Dispatch** ([#408](https://github.com/maziggy/bambuddy/pull/408), [#112](https://github.com/maziggy/bambuddy/issues/112)) — Printing from archives and the file manager now runs in the background via an async dispatch service. FTP uploads and print-start commands are decoupled from API request latency, so the UI responds immediately. Real-time progress is streamed to all clients via WebSocket, rendered as a persistent toast with per-job upload progress bars, status badges (dispatched/processing/completed/failed/cancelled), and a cancel button. The dispatcher supports concurrent uploads to different printers with per-printer queuing to prevent conflicts. Cancellation is cooperative — uploads abort at the next chunk boundary and clean up partial files on the printer. Batch progress tracking shows overall completion across multi-printer dispatches. Translations added for all 6 locales (en, de, fr, it, ja, pt-BR).
- **Include Beta Updates Setting** — New toggle in Settings → Updates to opt in to beta/prerelease update notifications. Default: off (stable only). The update checker now fetches `/releases` instead of `/releases/latest` and filters by `parse_version()` prerelease detection (not GitHub's `prerelease` flag, which may not be set correctly). Users on the Docker `latest` tag will no longer see notifications for beta releases they can't install.
- **Developer LAN Mode Detection & Warning Banner** — Automatically detects whether connected printers have Developer LAN Mode enabled by parsing the MQTT `fun` field (bit `0x20000000`). When any connected printer lacks developer mode, a persistent orange warning banner appears at the top of the UI with the affected printer name(s) and a link to Bambu Lab's documentation on how to enable it. Without developer mode, MQTT write operations (start/stop/pause prints, AMS control, light/speed/gcode commands) are silently rejected by newer firmware. The `developer_mode` state is included in the support bundle for diagnostics. New `/printers/developer-mode-warnings` endpoint provides a lightweight polling summary. Translations added for all 6 locales (en, de, fr, it, ja, pt-BR).

### Improved
- **Clear Plate Dot Indicator on Sidebar** — When the print queue is active and a printer finishes or fails with a pending next job, a small yellow dot now appears on the Printers sidebar icon to signal that user action (clearing the build plate) is needed. The indicator reuses the existing WebSocket-driven printer status cache, so no additional API polling is required. The dot disappears once the plate is cleared or the queue empties.
- **Inventory Sidebar Always Visible** — The Inventory sidebar item is no longer hidden when Spoolman is enabled. Instead, clicking it embeds the Spoolman web UI in the main content area via iframe (same approach as external links). When Spoolman is disabled, the internal inventory page is shown as before. Both modes use the same `/inventory` route and sidebar position.
- **Filament Override Test Coverage** — Added 11 backend unit tests: 6 for `_count_override_color_matches` (no status, exact match, no match, partial match, color normalization, external spool) and 5 for override application in filament matching (color override, tray_info_idx clearing, type change, partial override, nozzle filtering with override). Added 12 frontend tests for the `FilamentOverride` component: 5 rendering tests (null guards, slot display, dropdown count), 2 type filtering tests (same-type only, all colors), 3 nozzle filtering tests (extruder_id matching, single-nozzle passthrough, null extruder_id inclusion), and 2 interaction tests (select override, reset to original).
- **P2S Dual-AMS tray_now Test Coverage** — Added 14 integration tests for multi-AMS tray_now disambiguation on single-nozzle printers (resolving AMS-B slots via mapping field, AMS-A passthrough, multi-color mapping, ambiguous/missing mapping fallbacks, last_loaded_tray tracking). Added 9 unit tests for `_resolve_local_slot_from_mapping` (snow decoding, unmapped entry filtering, ambiguity detection, AMS-HT slot matching). All 66 tray_now-related tests pass.
- **Bulk Spool, Stock & Grouping Test Coverage** — Added 13 backend unit tests covering `SpoolBulkCreate` schema validation (quantity bounds, field preservation, stock vs configured distinction) and bulk endpoint logic (correct spool count, single quantity, identical fields). Added 29 frontend tests: 13 for `SpoolFormModal` covering `validateForm` with `quickAdd` flag (6 tests), quick-add toggle visibility, PA Profile tab hiding, quantity field gating (hidden by default, visible only in quick-add, hidden in edit mode), and brand/subtype optional asterisk removal in quick-add; 16 for inventory grouping logic covering `spoolGroupKey` identity/differentiation (7 tests) and `computeDisplayItems` grouping rules (9 tests for identical/different/used/assigned/single/order/mixed/empty scenarios).
- **Filament Cost Tracking Test Coverage** — Added 2 backend unit tests for archive cost aggregation (zero-cost guard preserves existing costs, positive-cost updates archive correctly). Added 2 frontend unit tests for spool form cost_per_kg persistence. Fixed missing `archive_id` database migration, SQLAlchemy `is None` → `.is_(None)` in where clauses, duplicate archive cost write, and unconditional zero-cost overwrite.
- **Spool Assignment Snapshot Test Coverage** — Added 7 backend unit tests covering spool assignment snapshotting at print start, snapshot-preferred spool lookup in both 3MF and AMS delta paths, fallback to live query for pre-upgrade sessions, and the core mid-print unlink scenario from #459.
- **Background Dispatch Test Coverage** — Added 5 backend unit tests for dispatch cancel races (single-lock TOCTOU fix), batch counter reset re-check, and job lifecycle. Added 2 FTP regression tests for voidresp error handling (upload-loop prevention) and A1 model voidresp skip. Added 1 frontend test for reprint toast suppression.
- **Tray Change Split Test Coverage** — Added 8 MQTT unit tests for `tray_change_log` lifecycle (default empty, seed on print start, clear on new print, record during RUNNING/PAUSE, ignore during IDLE, deduplicate, multi-change history). Added 6 usage tracker unit tests for weight splitting (per-layer gcode split, linear fallback, no-change normal path, empty log recovery, missing spool skip, triple segment split).
- **Developer Mode Detection Test Coverage** — Added 7 backend unit tests for MQTT `fun` field parsing (bit clear/set detection, exact bit check, invalid hex handling, state persistence across messages). Added 4 frontend tests for the warning banner (single/multiple printer names, hidden when empty, "How to enable" link).
- **Frontend Pre-Commit Hooks** ([#458](https://github.com/maziggy/bambuddy/issues/458)) — Added `frontend-typecheck` (`tsc --noEmit`) and `frontend-lint` (`eslint .`) hooks to the pre-commit config. Both hooks only trigger when `frontend/src/**/*.{ts,tsx}` files are staged.

## [0.2.1b] - 2026-02-19

### Fixed
- **PAUSED State Never Matched** ([#447](https://github.com/maziggy/bambuddy/issues/447)) — Removed dead `PAUSED` checks across frontend and backend. The printer only sends `PAUSE` via MQTT `gcode_state`, so `PAUSED` comparisons were unreachable code.
- **Nozzle Mapping Uses Wrong Source in 3MF Files** — The `extract_nozzle_mapping_from_3mf()` function used `filament_nozzle_map` (user preference) as the primary source for nozzle assignments. BambuStudio's "Auto For Flush" mode overrides user preferences at slice time, so the actual assignment lives in the `group_id` attribute on `<filament>` elements in `slice_info.config`. Now uses `group_id` as the primary source and falls back to `filament_nozzle_map` only when `group_id` is not present.
- **Print Scheduler Hard-Filters Nozzle When No Trays on Target Nozzle** — On dual-nozzle printers, the scheduler enforced a strict nozzle filter when matching filaments. If a slicer filament was assigned to a nozzle with no AMS trays (e.g., only external spool on left nozzle), the match failed even though the filament existed on the other nozzle. Now falls back to unfiltered matching when no trays exist on the target nozzle.
- **Print Scheduler External Spool Ignores Nozzle Assignment** — The external spool fallback in the scheduler always mapped to extruder 0 (right), ignoring the slicer's nozzle assignment. Now uses the 3MF nozzle mapping to select the correct extruder for external spool matches.
- **ams_extruder_map Race Condition on Printer Status API** — The `/printers/{id}/status` endpoint read `ams_extruder_map` from the MQTT state without checking if the AMS data had been received yet. On fresh connections before the first AMS push-all, this returned an empty map — causing the frontend nozzle filter to show all trays as unfiltered. Now returns an empty object gracefully and the frontend disables nozzle filtering until the map is populated.
- **Filament Mapping Frontend Ignores Nozzle for External Spools** — The `useFilamentMapping` hook always set `extruder_id: 0` for external spool matches. Now uses the nozzle mapping from the 3MF file to determine the correct extruder.
- **AMS-HT Global Tray ID Computed Wrong on Printer Card** — The PrintersPage computed AMS-HT tray IDs using `ams_id * 4 + slot` (giving 512+), but AMS-HT units use their raw `ams_id` (128-135) as the global tray ID. Now uses `ams_id` directly for AMS-HT units.
- **Filament Mapping Dropdown Shows Wrong Nozzle Trays** — The FilamentMapping dropdown filtered by `extruder_id` using strict equality, but `extruder_id` could be `undefined` for printers that hadn't reported their AMS extruder map yet. This caused all trays to be hidden. Now skips nozzle filtering when `extruder_id` is undefined.
- **Cancelled Print Usage Tracking Uses Stale Progress/Layer** — When a print was cancelled, the usage tracker read `mc_percent` and `layer_num` from the printer's MQTT state — but by the time the `on_print_complete` callback ran, the printer had already reset these to 0. Now captures the last valid progress and layer values during printing, and the usage tracker reads these captured values on cancellation for accurate partial usage.
- **H2D Tray Disambiguation Triggers on Single-Nozzle Printers** — The `tray_now <= 3` check for H2D dual-nozzle disambiguation matched any printer loading from AMS 0 (trays 0-3). On P2S, X1C, and X1E with multiple AMS units, this caused warning log spam every second. Now uses a persistent `_is_dual_nozzle` flag detected from `device.extruder.info` (>= 2 entries), which only dual-nozzle printers (H2D, H2D Pro) report.
- **AMS-HT Snow Slot Mismatch Log Spam on H2D** — The snow-based tray_now disambiguation computed `snow_slot = -1` for AMS-HT trays (IDs 128-135), causing a "slot mismatch" debug log on every MQTT update even though the result was correct. Now correctly computes `snow_slot = 0` for AMS-HT single-slot units.
- **H2D Tray Disambiguation Produces Bogus tray_now for AMS-HT** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — When the snow field hadn't arrived yet on H2D dual-nozzle printers, the `ams_extruder_map` fallback computed `ams_id * 4 + slot` for all AMS types — including AMS-HT units (IDs 128-135) which have a single slot and use their unit ID as the global tray ID. This produced bogus values like 512+ that briefly appeared in the UI and could pollute `last_loaded_tray`. Now correctly returns the AMS-HT unit ID for single-slot units, handles AMS-HT in multi-AMS matching, filters AMS-HT candidates when slot > 0, and tightens `last_loaded_tray` to only accept physically valid tray IDs (0-15, 128-135, 254).
- **Color Tooltip Clipped Behind Adjacent Swatches** — Color swatch hover tooltips in the spool form were rendered behind neighboring swatches due to missing z-index on the hover state. Added `hover:z-20` and tooltip `z-20` classes.
- **Print Queue Shows UUID Hash Instead of Filename** ([#438](https://github.com/maziggy/bambuddy/issues/438)) — When printing a library file, the Print Queue and archive displayed the UUID-hex disk filename (e.g., `c65887535303404eba1525176a0f78dc`) instead of the original human-readable name. Library files are stored on disk with UUID filenames for uniqueness, but `archive_print()` used the disk path as the display name. Now passes the original `LibraryFile.filename` through to `archive_print()` from both the print scheduler and the direct-print-from-library flow, so the archive's `filename`, `print_name`, and directory name all use the human-readable name.

- **Usage Tracking Wrong Spool on Dual-Nozzle / Multi-AMS Printers** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — On H2C, H2D Pro, and other dual-nozzle printers with multiple AMS units, the usage tracker attributed filament consumption to the wrong spools. The MQTT `mapping` field — a per-print array that maps slicer filament slots to physical AMS trays — was preserved in state but never parsed or used. The tracker fell back to `slot_id - 1` as the global tray ID, which is incorrect when AMS hardware IDs differ from sequential indices (e.g., AMS-HT units with ID 128). Now decodes the MQTT mapping field from its snow encoding (`ams_hw_id * 256 + local_slot`) into bambuddy global tray IDs and uses it as a universal mapping source — working for all printer models and all print sources (slicer, queue, reprint) without relying on `tray_now` disambiguation. For printers that don't provide the MQTT mapping field (A1, A1 Mini, P1S, P2S), a color-matching fallback compares 3MF filament slot colors against AMS tray colors to resolve the correct slot-to-tray mapping. Gracefully returns no match when colors are ambiguous (duplicate tray colors) or unavailable.
- **AMS Slot Config: PFUS Preset IDs Cause Slicer to Reset Slots** — When assigning a spool with a user-local `PFUS*` preset ID (from BambuStudio's custom filament profiles), the slicer didn't recognize the ID and actively reset the AMS slot configuration. Now replaces `PFUS*` IDs with generic Bambu filament IDs (e.g., `GFL99` for PLA). When the slot already has a recognized cloud-synced preset for the same material (e.g., `P4d64437`), it is reused to preserve K-profile calibration associations. Applies to both the slot configure endpoint and the inventory spool assignment flow.
- **Fill Level Bar Missing for Brand New Spools** — Spools with `weight_used = 0` (brand new, never printed) showed no fill level bar on the printer card. The condition checked `weight_used > 0` instead of `weight_used != null`, excluding zero-usage spools. Now correctly shows 100% fill for new spools while still hiding the bar when weight data is unavailable (`null`).
- **npm audit: suppress moderate ajv ReDoS finding** — Added `audit-level=high` to `frontend/.npmrc` so `npm audit` exits cleanly. The ajv@6 ReDoS (GHSA-2g4f-4pwh-qvx6) is a transitive dependency of eslint@9 with no patched v6 release; ajv@8 override breaks eslint. The vulnerability requires crafted `$data` schema input — not an attack vector in a linting config.
- **npm audit: fix minimatch ReDoS finding** — Added an npm override for `minimatch@^10.2.1` in `package.json` to resolve the high-severity ReDoS (GHSA-3ppc-4f35-3m26) affecting minimatch@3.x/9.x pulled in transitively by eslint@9, typescript-eslint, and @vitest/coverage-v8. Eslint@9 pins minimatch@3.x with no patched release; eslint@10 upgrades to minimatch@10 but is not yet available. The override forces the patched version across the tree. Verified lint, build, and all tests pass.
- **Spool Form Allows Empty Brand & Subtype** ([#417](https://github.com/maziggy/bambuddy/issues/417)) — The spool add/edit modal did not require Brand or Subtype fields, allowing spools to be saved without them. When such a spool was assigned to an AMS slot, the `tray_sub_brands` sent to the printer was incomplete (e.g., just "PETG" instead of "PETG Basic"), causing BambuStudio to not recognize the filament profile. Brand and Subtype are now mandatory fields with validation errors shown on submit.
- **Open in Slicer Fails When Authentication Enabled** ([#421](https://github.com/maziggy/bambuddy/issues/421)) — The "Open in Slicer" buttons for BambuStudio and OrcaSlicer failed with "importing failed" when authentication was enabled. Slicer protocol handlers (`bambustudio://`, `orcaslicer://`) launch the slicer app which fetches the file via HTTP — but cannot send authentication headers, so the global auth middleware returned 401. Additionally, the URL format was wrong on Linux (used the macOS-only `bambustudioopen://` scheme instead of `bambustudio://open?file=`). Fixed with short-lived, single-use download tokens: the frontend fetches a token via an authenticated POST endpoint, then builds a `/dl/{token}/{filename}` URL that the slicer can access without auth headers. The token is validated server-side (5-minute expiry, single-use). Platform-specific URL formats now match the actual slicer source code: macOS uses `bambustudioopen://` with URL encoding, Windows/Linux use `bambustudio://open?file=`, and OrcaSlicer uses `orcaslicer://open?file=`.

### New Features
- **Multiple Virtual Printers** — Run multiple virtual printers per Bambuddy installation. Each virtual printer gets a dedicated bind IP address with completely independent FTP, MQTT, SSDP, and Bind servers — no shared services or SNI routing. Full CRUD API (`/api/virtual-printers`) and React UI for creating, editing, and deleting virtual printers. Each instance supports all four modes (Immediate, Review, Print Queue, Proxy), any of the 11 supported printer models, per-instance TLS certificates (shared CA), and individual network interface override. Database-backed with auto-incremented serial suffixes.
- **Virtual Printer: Dual Bind/Detect Ports** ([#445](https://github.com/maziggy/bambuddy/issues/445)) — The slicer bind/detect handshake now listens on both ports 3000 and 3002. Different BambuStudio/OrcaSlicer versions use different ports for this handshake, so Bambuddy accepts connections on either. Applies to both server mode (BindServer) and proxy mode (SlicerProxyManager).
- **Clear Plate Permission** ([#446](https://github.com/maziggy/bambuddy/issues/446)) — New `printers:clear_plate` permission allows admins to grant users the ability to confirm a plate is cleared for the next queued print without granting full `printers:control` (which also allows stopping prints, configuring AMS, toggling lights, etc.). Existing groups with `printers:control` automatically receive the new permission on startup. The Operators default group includes it by default.
- **Full-Page Group Permission Editor** ([#446](https://github.com/maziggy/bambuddy/issues/446)) — Replaced the cramped permission modal with a dedicated full-page editor at `/groups/:id/edit`. Features a responsive 2-column grid of always-expanded category cards, permission search/filtering, Select All / Clear All bulk actions, category-level checkboxes with partial state, and a fixed bottom action bar. The old `GroupsPage.tsx` dead code has been removed.

### Changed
- **Filament Catalog API Renamed** ([#427](https://github.com/maziggy/bambuddy/issues/427)) — Renamed `/api/v1/filaments/` to `/api/v1/filament-catalog/` to avoid confusion with the inventory spools page (labeled "Filament" in the UI). The old endpoint managed material type definitions (cost, temperature, density), not physical spools — the shared name caused users to expect the API to return their spool inventory.

### Improved
- **AMS Mapping Test Coverage** — Added 63 backend tests for scheduler AMS mapping (nozzle filtering, external spool extruder assignment, fallback behavior) and 43 frontend tests for `useFilamentMapping` hook (nozzle-aware matching, AMS-HT handling, external spool extruder logic).
- **Tray Now Disambiguation Test Coverage** — Added 28 MQTT message replay tests covering all `tray_now` disambiguation paths: single-nozzle passthrough (X1E/P2S), H2D dual-nozzle snow field, pending target, `ams_extruder_map` fallback, active extruder switching, and full multi-color print lifecycles.
- **Tray Info Idx Resolution Test Coverage** — Added 12 backend integration tests for PFUS→generic tray_info_idx resolution across both the slot configure and inventory assignment endpoints, plus 10 frontend unit tests for the fill level calculation logic.

## [0.2.0] - 2026-02-17

### New Features
- **Bed Cooled Notification** ([#378](https://github.com/maziggy/bambuddy/issues/378)) — New notification event that fires when the print bed cools below a configurable threshold (default 35°C) after a print completes. Useful for knowing when it's safe to remove parts. A background task polls the bed temperature every 15 seconds after print completion and sends a notification when it drops below the threshold. Automatically cancels if a new print starts or the printer disconnects. The threshold is configurable in Settings → Notifications. Includes a customizable notification template with printer name, bed temperature, and threshold variables.
- **Spool Inventory — AMS Slot Assignment** — Assign inventory spools to AMS slots for filament tracking. Hover over any non-Bambu-Lab AMS slot to assign or unassign spools. The assign modal filters out Bambu Lab spools (tracked via RFID) and spools already assigned to other slots. Bambu Lab spool slots automatically hide assign/unassign UI since they are managed by the AMS. When a Bambu Lab spool is inserted into a slot with a manual assignment, the assignment is automatically unlinked.
- **Spool Inventory — Remaining Weight Editing** — Edit the remaining filament weight when adding or editing a spool. The new "Remaining Weight" field in the Additional section shows current weight (label weight minus consumed) with a max reference. Edits are stored as `weight_used` internally.

- **Spool
- Inventory — Unified 3MF-Based Usage Tracking** ([#336](https://github.com/maziggy/bambuddy/issues/336)) — All spools (Bambu Lab and third-party) now use 3MF slicer estimates as the primary tracking source. Per-filament `used_g` data from the archived 3MF file provides precise per-spool consumption. For failed or aborted prints, per-layer G-code analysis provides accurate partial usage up to the exact failure layer, with linear progress scaling as fallback. AMS remain% delta is the final fallback for G-code-only prints without an archived 3MF. Slot-to-tray mapping uses queue `ams_mapping` for queue-initiated prints and the printer's `tray_now` state for single-filament non-queue prints, ensuring the correct physical spool is always tracked.
- **Notification Templates — Filament Usage Variables** ([#336](https://github.com/maziggy/bambuddy/issues/336)) — `print_complete`, `print_failed`, and `print_stopped` notification events now expose `{filament_grams}` (total grams, scaled by progress for partial prints), `{filament_details}` (per-filament breakdown with AMS slot info, e.g. "AMS-A T1 PLA: 12.4g | AMS-A T3 PETG: 2.8g"), and `{progress}` (completion percentage for failed/stopped prints). The `{filament_details}` variable includes the AMS unit and tray position for each filament used, with "Ext" shown for external spool holders. Falls back to type-only format (e.g. "PLA: 10.0g") when usage tracking data is unavailable. Webhook payloads include `filament_used`, `filament_details`, and `progress` fields. Per-slot filament data is stored in archive `extra_data` for downstream use.
- **Printer Status Summary Bar — Next Available & Availability Count** ([#354](https://github.com/maziggy/bambuddy/issues/354)) — The status bar on the Printers page now shows an availability count ("X available") alongside the printing/offline counts, and a "Next available" indicator showing which printing printer will finish soonest — with printer name, mini progress bar, completion percentage, and remaining time. Useful for print farms to quickly identify the next free printer. Updates in real-time via WebSocket. Translated in all 4 locales (en, de, ja, it).
- **Nozzle-Aware AMS Filament Mapping for Dual-Nozzle Printers** ([#318](https://github.com/maziggy/bambuddy/issues/318)) — On dual-nozzle printers (H2D, H2D Pro), each AMS unit is physically connected to either the left or right nozzle. Bambuddy now reads nozzle assignments from the 3MF file (`filament_nozzle_map` + `physical_extruder_map` in `project_settings.config`) and constrains filament matching to only AMS trays connected to the correct nozzle via `ams_extruder_map`. Applies to the print scheduler, reprint modal, queue modal, and multi-printer selection. Falls back gracefully to unfiltered matching when no trays exist on the target nozzle. The filament mapping UI shows L/R nozzle badges for dual-nozzle prints. Translated in all 4 locales (en, de, ja, it).
- **Dual External Spool Support for H2D** — H2-series printers with two external spool holders (Ext-L and Ext-R) are now fully supported. The external spool section renders as a grid with both slots, each showing filament type, color, fill level, and hover card details. Previously only a single external spool was displayed. Applies to the printer card, filament mapping, print scheduler, usage tracking, and inventory assignment. The `vt_tray` field is now an array across the entire stack (MQTT, API, WebSocket, frontend).
- **AMS Slot Configuration — Model Filtering & Pre-Population** — The Configure AMS Slot modal now filters filament presets by the connected printer model. Only presets matching the printer (e.g., "@BBL X1C" presets for X1C printers) and generic presets without a model suffix are shown. Local presets are filtered by their `compatible_printers` field. When re-configuring an already-configured slot, the modal pre-selects the saved preset, pre-populates the color, and auto-selects the active K-profile. The preset list auto-scrolls to the selected item. All modal strings are now fully translated in 5 locales (en, de, fr, it, ja).
- **K-Profiles View — Accurate Filament Name Resolution** — K-profile filament names are now resolved from builtin filament tables and user cloud presets (via new `/cloud/filament-id-map` endpoint) instead of showing raw IDs like "GFU99" or "P4d64437". Falls back to extracting names from the profile name field.
- **Print Log** — New view mode on the Archives page showing a chronological table of all print activity. Columns include date/time, print name, printer, user, status, duration, and filament. Supports filtering by search text, printer, user, status, and date range. Pagination with configurable page size. A dedicated clear button deletes only log entries without affecting archives. Data is stored in a separate `print_log_entries` database table.
- **Sync Spool Weights from AMS** — New button in Settings → Filament Tracking (built-in inventory mode) to force-sync all inventory spool weights from the live AMS remain% values of connected printers. Overwrites the database weight data with current sensor readings. Useful for recovering from corrupted weight data (e.g., after a power-off event zeroed all fill levels). Requires printers to be online. Includes a confirmation modal.
- **Notification Thumbnails for Telegram & ntfy** ([#372](https://github.com/maziggy/bambuddy/issues/372)) — Print thumbnail images are now attached to Telegram and ntfy notifications (previously only Pushover and Discord). Telegram uses the `sendPhoto` API with the image as caption attachment. ntfy sends the image as a binary PUT with `Filename` and `Message` headers. No configuration needed — images are sent automatically when available.
- **Clear HMS Errors** — New "Clear Errors" button in the HMS error modal sends a `clean_print_error` MQTT command to dismiss stale `print_error` values that persist after print cancellation or transient events. Locally clears the error list for immediate UI feedback. Permission-gated to `printers:control`. The button only appears when there are active errors.

### Fixed
- **Firmware Upload Uses Wrong Filename on Cache Hit** — The firmware update uploader cached downloaded firmware files under a mangled name (e.g., `X1C_01_09_00_10.bin`) instead of the original filename from Bambu Lab's CDN. On the first download the correct filename was uploaded to the SD card, but on subsequent attempts the cached file with the wrong name was used — causing the printer to not recognize the firmware file. Now caches using the original filename so the SD card always receives the correct file.
- **Update Check Runs When Disabled** ([#367](https://github.com/maziggy/bambuddy/issues/367)) — The Settings page triggered an update check on every visit even when "Check for updates" was disabled, causing error popups on air-gapped systems with no internet. The backend `/updates/check` endpoint also ignored the setting entirely. Now the backend returns early without making GitHub API calls when the setting is disabled, the Settings page respects the `check_updates` flag before auto-fetching, and the printer card firmware badge shows a neutral version-only display instead of disappearing when firmware update checks are off.
- **Stale Inventory Assignments Persist After Switching to Spoolman Mode** — When switching from built-in inventory to Spoolman mode, existing spool-to-AMS-slot assignments were not cleaned up. The printer card hover cards continued showing "Assign Spool" buttons that opened the internal inventory modal, and any prior assignments remained visible. Now bulk-deletes all `SpoolAssignment` records when enabling Spoolman, invalidates the frontend cache so printer cards update immediately, and hides the inventory assign/unassign UI on printer cards while in Spoolman mode.
- **Bulk Archive Delete Leaves Orphaned Database Records** — When bulk-deleting archives, the files were removed from disk before the database commit. If concurrent SQLite writes caused a lock timeout, the commit failed and rolled back — leaving database records pointing to deleted files (broken thumbnails, 404 errors). Fixed by deleting the database record first and only removing files after a successful commit.
- **Model-Specific Maintenance Tasks for Carbon Rods vs Linear Rails** ([#351](https://github.com/maziggy/bambuddy/issues/351)) — Maintenance tasks "Clean Carbon Rods" and "Lubricate Linear Rails" were shown for all printers regardless of motion system. H2 and A1 series use linear rails (not carbon rods), and X1/P1/P2S series use carbon rods (not linear rails). Maintenance types are now classified by rod/rail type: "Lubricate Carbon Rods" and "Clean Carbon Rods" for X1/P1/P2S, "Lubricate Linear Rails" and "Clean Linear Rails" for A1/H2. Stale and duplicate system types are automatically cleaned up on startup. Includes model-specific wiki links and i18n keys for all 4 locales.
- **AMS Slot Configuration Overwritten on Startup** — Bambuddy was resetting AMS slot filament presets on every startup and reconnection. The `on_ams_change` callback unconditionally unlinked Bambu Lab spool assignments on each MQTT push-all response, then re-assigned them by sending `ams_filament_setting` without a `setting_id`, which cleared the printer's filament preset. Now compares spool RFID identifiers (`tray_uuid` / `tag_uid`) before unlinking — if the same spool is still in the slot, the assignment is preserved and no `ams_filament_setting` command is sent.
- **Bambu Lab Spool Detection False Positives** — The `is_bambu_lab_spool()` function (backend) and `isBambuLabSpool()` (frontend) incorrectly identified third-party spools as Bambu Lab spools when they used Bambu generic filament presets (e.g., "Generic PLA"). The `tray_info_idx` field (e.g., "GFA00") identifies the filament *type*, not the spool manufacturer — third-party spools using Bambu presets also have GF-prefixed values. Removed `tray_info_idx` from detection logic; now uses only hardware RFID identifiers (`tray_uuid` and `tag_uid`) which are physically embedded in genuine Bambu Lab spools.
- **FTP Disconnect Raises EOFError When Server Dies** — `BambuFTPClient.disconnect()` only caught `OSError` and `ftplib.Error`, but `quit()` raises `EOFError` when the server has closed the connection mid-session. `EOFError` is not a subclass of either, so it propagated to callers. Now caught alongside the other exception types for clean best-effort disconnect.
- **RFID Spool Data Erased by Periodic AMS Updates** — Periodic MQTT push-all responses cleared `tag_uid` and `tray_uuid` fields because they were included in the "always update" list. These fields are now preserved during updates and only cleared when a spool is physically removed (slot clearing detected by empty `tray_type`). This fixes the AMS "eye" icon disappearing for RFID spools after startup.
- **AMS Slot Configuration Overwrites RFID Spool State** — Configuring an AMS slot for an RFID-detected Bambu Lab spool sent `ams_set_filament_setting`, which replaced the firmware's RFID-managed filament config with a manual one — causing the slicer's "eye" icon to change to a "pen" icon. Now detects RFID spools and skips the filament setting command, only sending K-profile selection.
- **K-Profile Selection Corrupts Existing Profiles on X1C/P1S** — The `extrusion_cali_sel` command included a `setting_id` field that BambuStudio never sends, causing firmware to mislink calibration data. The `extrusion_cali_set` command was sent unconditionally, overwriting existing profile metadata. Now `setting_id` is removed from selection commands, and `extrusion_cali_set` is only sent when no existing profile is selected (`cali_idx < 0`).
- **AMS Slot Configure — Black Filament Color Not Pre-Populated** — When re-opening the Configure AMS Slot modal for a slot with black filament, the color field was empty despite the preset and K-profile being correctly pre-selected. The color pre-population logic excluded hex `000000` (black) as a guard against empty slots, but empty slots already skip color data entirely. Removed the unnecessary check so black is now pre-populated like any other color.
- **Archive List View Not Labeling Failed Prints** ([#365](https://github.com/maziggy/bambuddy/issues/365)) — The archive grid view displayed a red "Failed" / "Cancelled" badge on failed and aborted prints, but the list view had no equivalent indicator. Now shows an inline status badge next to the print name in list view.
- **Reprint Fails with SD Card Error for Archives Without 3MF File** ([#376](https://github.com/maziggy/bambuddy/issues/376)) — When a print was sent from an external slicer and Bambuddy couldn't download the 3MF from the printer during auto-archiving, the fallback archive had no file. Attempting to reprint such an archive tried to upload the data directory as a file, causing a confusing "SD card error." The backend now returns a clear error for file-less archives, and the frontend disables Print/Schedule/Open in Slicer buttons with a tooltip explaining that the 3MF file is unavailable.
- **Inventory Spool Weight Resets After Print Completes** — After a print, the usage tracker correctly updated `weight_used` (e.g., +1.6g), but periodic AMS status updates recalculated `weight_used` from the AMS remain% sensor and overwrote the precise value. For small prints on large spools (e.g., 1.6g on 1000g), the AMS remain% stays at 100% (integer resolution = 10g steps), resetting `weight_used` back to 0. The AMS weight sync now only increases `weight_used`, never decreases it, preserving precise values from the usage tracker.
- **All Spool Fill Levels Drop to Zero When Printers Power Off** — When a printer powers off, the AMS sensor can report `remain=0` for all trays while `tray_type` is still populated. The weight sync treated 0% remain as "100% consumed," computing `weight_used = label_weight` (e.g., 1000g). The "only increase" guard passed because `label_weight > current_used + 1`, marking every assigned spool as fully consumed. The AMS weight sync now skips `remain=0` entirely — a physically empty spool is tracked by the usage tracker during the print, not by a transient AMS sensor reading.
- **Spool Edit Form Overwrites Usage-Tracked Weight** — Editing any spool field (note, color, material, etc.) sent the full form data back to the server, including `weight_used`. If the frontend cache was stale (e.g., loaded before the last print completed), saving the form would silently reset `weight_used` to the pre-print value, reverting the remaining weight to full. The form now only includes `weight_used` in the update request when the user explicitly changes the weight field.
- **K-Profile Auto-Select Fails for Non-BL Spools on Dual-Nozzle Printers** — When assigning a third-party spool to an AMS slot on dual-nozzle printers (H2D, H2D Pro), the MQTT auto-configure step crashed with `'SpoolKProfile' object has no attribute 'extruder_id'`. The K-profile model uses `extruder` (not `extruder_id`). Fixed the attribute name so K-profile matching correctly filters by nozzle on dual-extruder printers.
- **Loose Archive Name Matching Could Cause Wrong Archive Reuse** ([#374](https://github.com/maziggy/bambuddy/issues/374)) — The `on_print_start` callback used `ilike('%{name}%')` to find existing "printing" archives, which meant a print named "Clip" could incorrectly match "Cable Clip" or "Clip Stand". This could cause a new print to reuse the wrong archive or skip creating one. Tightened to exact `print_name` match or exact filename variants (`.3mf`, `.gcode.3mf`).
- **Phantom Prints on Power Cycle** ([#374](https://github.com/maziggy/bambuddy/issues/374)) — The print queue uploaded `.3mf` files to the printer's SD card root (`/`) but never deleted them after the print finished. Some printers (e.g. P1S) auto-start files found in the root directory on power cycle, causing ghost prints on every reboot. Now deletes the uploaded file from the SD card after print completion (best-effort, non-blocking). The cleanup also tries `.gcode` files and retries up to 3 times with a 2-second delay to handle printers that briefly lock the filesystem after a print ends. Runs before the archive lookup so it works even when auto-archiving is disabled.
- **Queue Items Stuck in "Printing" After Print Completes** — The queue item status update (from `printing` to `completed`/`failed`) was placed after an early return that exits when the archive record cannot be found. If the archive lookup failed (e.g. app restart mid-print, manual archive deletion), the function returned early and the queue item stayed in `printing` forever. Over multiple print cycles, stale items accumulated — causing the "Printing" count to show double the actual printers and completed prints to remain in the "Currently Printing" section. Moved the queue item status update (including MQTT relay notification, queue-completed notification, and auto-power-off) to before the archive lookup early return so it always runs.
- **Spool Form Scrollbar Flicker in Edge** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — The Add/Edit Spool modal's scrollable area used `overflow-y: auto`, which on Windows Edge (where scrollbars take layout space) caused the scrollbar to appear and disappear on hover — making the color picker unusable at certain zoom levels. Added `scrollbar-gutter: stable` to reserve scrollbar space and prevent layout thrashing.
- **Archive Duplicate Badge Misses Name-Based Duplicates** ([#315](https://github.com/maziggy/bambuddy/issues/315)) — The duplicate badge on archive cards only matched by file content hash, so re-sliced prints of the same model (different GCODE, same print name) were not flagged as duplicates. Now also matches by print name (case-insensitive), consistent with the detail view's duplicate detection.
- **Schedule Print Allows No Plate Selected for Multi-Plate Files** ([#394](https://github.com/maziggy/bambuddy/issues/394)) — When scheduling a multi-plate file from the file manager, the modal showed a "Selection required" warning but still allowed submission without selecting a plate. The job defaulted to plate 1, but the queue item didn't indicate which plate, and editing showed no plate selected. Now auto-selects the first plate by default when plates load, and the submit button validation applies to both archive and library files.
- **3MF Usage Tracking Broken for Queue Prints from File Manager** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — When a print was queued from the file manager (library file), the scheduler did not create an archive or register the expected print. The `on_print_start` callback had to re-download the 3MF from the printer via FTP, and if that failed, a fallback archive was created without the 3MF file — making 3MF-based filament usage tracking impossible. The queue item's `archive_id` also remained NULL, so the usage tracker could not find the queue's AMS slot mapping for correct spool resolution. The scheduler now creates an archive from the library file before uploading, links it to the queue item, and registers it as an expected print — matching the behavior of the direct library print route.
- **Printer Queue Widget Shows "Archive #null" for File Manager Prints** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — The "Next in queue" widget on the printer card only checked `archive_name` and `archive_id` when displaying the queued item name. Queue items from the file manager have `library_file_name` and `library_file_id` instead, so the widget displayed "Archive #null". Now falls back to `library_file_name` and `library_file_id`, matching the Queue page display logic.
- **Inventory Usage Not Tracked for Remapped AMS Slots** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — When reprinting an archive with a different AMS slot mapping (e.g. changing from slot A1 to C4 in the mapping modal), the usage tracker used the default 3MF slot-to-tray mapping instead of the actual mapping from the print command. The `ams_mapping` from reprint, library print, and queue print commands is now stored and used as the highest-priority mapping source for usage tracking.
- **Inventory Usage Not Tracked for Slicer-Initiated Prints on H2D** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — On H2D printers, the AMS `tray_now` field is always 255 in MQTT data. The actual tray is resolved via the snow field ~44 seconds after print start, but reverts to "unloaded" when the AMS retracts filament at completion. The usage tracker now tracks `last_loaded_tray` — the last valid tray seen during printing — as a fallback when both `tray_now` at start and at completion are invalid. Also captures `tray_now` at print start for printers that report a valid value before the RUNNING state.
- **Inventory Usage Wrong Tray for Slicer-Initiated Prints** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — When a print was started from an external slicer (BambuStudio, OrcaSlicer, Bambu Handy), Bambuddy never saw the `ams_mapping` the slicer sent, because it only subscribed to the printer's report topic. The usage tracker fell back to `tray_now` which could resolve to the wrong AMS tray (e.g., Black PLA at A2 instead of Green PLA at A4 on H2D Pro). Now subscribes to the MQTT request topic to intercept print commands from any source, capturing the `ams_mapping` universally — regardless of who starts the print. The request topic subscription is fail-safe: if the printer's MQTT broker rejects it (e.g., P1S), Bambuddy detects the rejection via SUBACK or disconnect timing and gracefully disables the subscription for that printer, falling back to the existing `tray_now`-based tracking without breaking the MQTT connection.
- **P1S Timelapse Not Detected — AVI Format Support** ([#405](https://github.com/maziggy/bambuddy/issues/405)) — P1-series printers save timelapse videos as `.avi` (MJPEG), but the timelapse scanner only looked for `.mp4` files — so P1S timelapses were never found or attached to archives. Now discovers both `.mp4` and `.avi` timelapse files across all FTP directories (`/timelapse`, `/timelapse/video`, `/record`, `/recording`). AVI files are saved immediately and converted to MP4 in a non-blocking background task using FFmpeg with `-threads 1` and `nice -n 19` to minimize CPU impact on Raspberry Pi. If FFmpeg is unavailable, the AVI is served as-is with the correct MIME type. The manual "Scan for Timelapse" route also searches the additional directories used by P1-series printers.
- **Timelapse Upload & Remove** ([#406](https://github.com/maziggy/bambuddy/issues/406)) — When the auto-scan attaches the wrong timelapse (e.g., from a different print), there was no way to remove it or attach the correct one. Added "Upload Timelapse" and "Remove Timelapse" context menu items. Upload accepts `.mp4`, `.avi`, and `.mkv` files (non-MP4 auto-converted in background). Remove deletes the file and clears the database reference. Both actions are permission-gated and available in grid and list views.
- **Spool Assignments Falsely Unlinked After Print Due to Color Variation** — The auto-unlink logic compared AMS tray colors against saved fingerprints using exact hex match. RFID sensors report slightly different color values across reads (e.g. `7CC4D5FF` vs `56B7E6FF` for the same spool, Euclidean distance ~43.6). Now uses a color similarity function with a tolerance threshold of 50, preventing false unlinks from minor RFID/firmware color variations while still detecting genuinely different spools.

### Improved
- **Virtual Printer: Dual Bind/Detect Ports 3000 + 3002** ([#445](https://github.com/maziggy/bambuddy/issues/445)) — BambuStudio/OrcaSlicer require a bind/detect handshake before connecting via MQTT/FTP. Different slicer versions use port 3000 or 3002, so the BindServer and proxy now listen on both ports for full compatibility. Docker users in bridge mode need to expose both (`-p 3000:3000 -p 3002:3002`).
- **Usage Tracking Diagnostic Logging** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — Added INFO-level logging at print start and completion that dumps the printer's MQTT `mapping` field, `tray_now`, `last_loaded_tray`, all mapping-related raw data keys, and per-AMS-tray summaries (type, color, tray_now, tray_tar). Enables investigating the slot-to-tray mapping behavior across different printer models (X1E, H2D Pro, P1S, etc.) without requiring DEBUG mode.
- **Skip Objects: Click-to-Enlarge Lightbox** ([#396](https://github.com/maziggy/bambuddy/issues/396)) — The skip objects modal's small 208px image panel made it difficult to distinguish object markers when parts are small or close together. Clicking the image now opens a fullscreen lightbox overlay with the same image and markers at a much larger size (up to 600px). The 24px marker circles are proportionally smaller relative to the enlarged image, solving the overlap problem. Close via X button, Escape key, or clicking the backdrop. Escape cascades correctly — closes lightbox first, then the modal.
- **Phantom Print Investigation — Logging & Hardening** ([#374](https://github.com/maziggy/bambuddy/issues/374)) — Added targeted logging and hardening to help diagnose reports of prints starting automatically without user input. Debug log volume reduced ~90% by suppressing `sqlalchemy.engine` (changed from INFO to WARNING) and `aiosqlite` (new WARNING suppression) noise that previously filled 2.5MB in 16 minutes. Every `start_print()` call now logs a `PRINT COMMAND` trace with the caller's file, line, and function name. The print scheduler logs pending queue items when found. `on_print_complete` warns when multiple queue items are in "printing" status for the same printer, which signals a state inconsistency.
- **Reduce Log Noise from MQTT Diagnostics** ([#365](https://github.com/maziggy/bambuddy/issues/365)) — Downgraded 58 high-frequency MQTT diagnostic messages from INFO to DEBUG level. Payload dumps, detector state changes, field discovery logs, H2D disambiguation, and periodic status updates no longer flood the log at the default INFO level. Also suppresses paho-mqtt library INFO messages in production. User-initiated actions (print start/stop, AMS load/unload, calibration) remain at INFO. All diagnostic detail is still available when debug logging is enabled.
- **SQLite WAL Mode for Database Reliability** — Database now uses Write-Ahead Logging (WAL) mode with a 5-second busy timeout, reducing "database is locked" errors under concurrent access. WAL mode allows simultaneous reads during writes, improving responsiveness for multi-printer setups. Automatically enabled on startup.
- **External Camera Not Used for Snapshot + Stream Dropping** ([#325](https://github.com/maziggy/bambuddy/issues/325)) — The snapshot endpoint (`/camera/snapshot`) always used the internal printer camera even when an external camera was configured. Now checks for external camera first, matching the existing stream endpoint behavior. Also fixed external MJPEG and RTSP streams silently dropping every ~60 seconds due to missing reconnect logic — the underlying stream generators exit on read timeout, and the caller now retries up to 3 times with a 2-second delay instead of ending the stream.
- **H2C Nozzle Rack Text Unreadable on Light Filament Colors** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — Nozzle rack slots use the loaded filament color as background, but white/light filaments made the white "0.4" text nearly invisible. Now uses a luminance check to switch to dark text on light backgrounds.
- **File Downloads Show Generic Filenames** ([#334](https://github.com/maziggy/bambuddy/issues/334)) — Downloaded files with special characters in their names (spaces, umlauts, parentheses) were saved as generic `file_1`, `file_2` instead of the original filename. The `Content-Disposition` header parser now handles RFC 5987 percent-encoded filenames (`filename*=utf-8''...`) used by FastAPI for non-ASCII characters. Fix applied to all download endpoints (library files, archives, source files, F3D files, project exports, support bundles, printer files).
- **Printer Card Cover Image Not Updating Between Prints** — The cover image on the printer card only refreshed on page reload. The `<img>` URL was always the same (`/printers/{id}/cover`) regardless of which print was active, so the browser served its cached image. Now appends the print name as a cache-busting query parameter so the browser fetches the new cover when a different print starts.
- **Telegram Bold Title Broken by Underscores in Message** ([#332](https://github.com/maziggy/bambuddy/issues/332)) — Telegram notifications showed literal `*Title*` asterisks instead of bold text when the message body contained underscores (e.g. job name `A1_plate_8`, error code `0300_0001`). The code was disabling Markdown parsing entirely when underscores were detected. Now escapes underscores in the body with `\_` so Markdown rendering stays enabled.
- **Queued Jobs Incorrectly Archived After Duplicate Execution Detection** ([#341](https://github.com/maziggy/bambuddy/issues/341)) — When the same file was added to the print queue multiple times, only the first job executed. All subsequent jobs were automatically skipped with "already printed X hours ago" because they shared the same archive reference, and a safety check incorrectly treated them as phantom reprints. The same issue also affected single queue items created from recently completed archives. Removed the overly broad 4-hour duplicate detection check — the crash recovery scenario it guarded against is already handled by the queue item status lifecycle.

### New Features
- **External Links: Open in New Tab** ([#338](https://github.com/maziggy/bambuddy/issues/338)) — External sidebar links can now optionally open in a new browser tab instead of an iframe. Sites behind reverse proxies (Traefik, nginx) that send `X-Frame-Options: SAMEORIGIN` or CSP `frame-ancestors` headers block iframe embedding, causing "refused to connect" errors. A new "Open in new tab" toggle in the add/edit link modal lets users choose per-link. Keyboard shortcuts (number keys) also respect the setting. Defaults to iframe (existing behavior) for backward compatibility.
- **Print Queue: Clear Plate Confirmation** — When a print finishes or fails and more items are queued, the printer card now shows a "Clear Plate & Start Next" button. The scheduler no longer auto-starts the next print while the printer is in FINISH or FAILED state — the user must confirm the build plate has been cleared first. This prevents prints from starting on a dirty plate. The button respects the `printers:control` permission and is available in all supported languages (en/de/ja).
- **Clear Plate State Persists Across Page Refresh** ([#410](https://github.com/maziggy/bambuddy/issues/410)) — After clicking "Clear Plate & Start Next", refreshing the page showed the Clear Plate button again because the frontend determined the state purely from the printer's FINISH/FAILED status. The `plate_cleared` flag is now included in the printer status API response, so the widget correctly shows the passive queue link instead of the Clear Plate button after acknowledgment — even after a page refresh.

### Improved
- **Skip Objects: Confirmation Dialog** ([#346](https://github.com/maziggy/bambuddy/issues/346)) — Added a warning confirmation modal before skipping an object during a print. Shows the object name and warns the action is irreversible. Prevents accidentally skipping the wrong object. Translated in all 4 locales (en, de, ja, it).
- **Additional Currency Options** ([#329](https://github.com/maziggy/bambuddy/issues/329), [#333](https://github.com/maziggy/bambuddy/issues/333)) — Added 17 additional currencies to the cost tracking dropdown: HKD, INR, KRW, SEK, NOK, DKK, PLN, BRL, TWD, SGD, NZD, MXN, CZK, THB, ZAR, RUB.
- **Move Email Settings Under Authentication Tab** — Renamed the settings "Users" tab to "Authentication" and moved the standalone "Global Email" tab into it as an "Email Authentication" sub-tab. Groups email/SMTP configuration with user management where it logically belongs. Legacy `?tab=email` URLs are handled automatically.
- **Inventory — Confirmation Modals for Delete & Archive** — The inventory page now uses the app's styled confirmation modal for both delete and archive actions. Previously, delete used the browser's native `confirm()` dialog and archive had no confirmation at all. Delete shows a danger-styled modal, archive shows a warning-styled modal. Translated in all 5 locales (en, de, fr, it, ja).
- **Default Color Catalog Expanded to 638 Colors Across 20 Brands** — The built-in filament color catalog has been expanded from 258 entries (6 brands) to 638 entries (20 brands). Added Overture, Sunlu, Creality, Elegoo, Jayo, Inland, Eryone, ColorFabb, Fillamentum, FormFutura, Fiberlogy, MatterHackers, Protopasta, 3DXTECH, and Sakata3D. eSUN expanded from 10 generic placeholder entries to 79 measured colors across 10 material lines (PLA+, Pro PLA+, PLA, PLA Silk, PLA Metal, PLA-ST, PETG, PETG-HS, ABS, ABS+). All hex codes sourced from FilamentColors.xyz measured swatches.
- **Settings — Built-in Inventory Feature Note** — Added a note in Settings > Filament > Built-in Inventory that third-party spools can be assigned to inventory spools for tracking.
- **Catalog Settings Cards Taller** — Spool Catalog and Color Catalog settings panels increased from 400px to 600px max height for better browsability with the expanded default catalogs.

## [0.1.9] - 2026-02-10

### New Features
- **Advanced Authentication via Email** ([#322](https://github.com/maziggy/bambuddy/pull/322)) — Optional SMTP-based email integration for streamlined user onboarding and self-service password management. Admins configure SMTP settings and create users with just a username and email — the system generates a secure random password and emails it directly to the new user. Admins can trigger one-click password resets from User Management. Users can reset their own forgotten password from the login screen without contacting an admin. Includes customizable email templates for welcome emails and password resets. Username and email login is case-insensitive. Can be enabled or disabled independently at any time without affecting existing accounts.
- **Configurable Slicer Preference** ([#313](https://github.com/maziggy/bambuddy/issues/313)) — New "Preferred Slicer" setting in General settings to choose between Bambu Studio and OrcaSlicer. Controls the protocol used by all "Open in Slicer" buttons across Archives, 3D Preview, and context menus. OrcaSlicer uses the `orcaslicer://open?file=` protocol. Default remains Bambu Studio for backward compatibility.
- **Local Profiles — OrcaSlicer Import** ([#310](https://github.com/maziggy/bambuddy/issues/310)) — Import slicer presets from OrcaSlicer without Bambu Cloud. Supports `.orca_filament`, `.bbscfg`, `.bbsflmt`, `.zip`, and `.json` exports. Resolves OrcaSlicer inheritance chains by fetching base Bambu profiles from GitHub (cached locally with 7-day TTL). Stores presets in the database with extracted core fields (material type, vendor, nozzle temps, pressure advance, compatible printers). New "Local Profiles" tab on the Profiles page with drag-and-drop import, 3-column layout (Filament/Process/Printer), search, and expandable preset details. Local filament presets appear in AMS slot configuration alongside cloud presets. Includes smart profile type detection (explicit type field, ZIP path hints, settings ID keys, content heuristics, and name-based patterns) and material/vendor extraction from preset names as fallback.
- **Hostname Support for Printers** ([#290](https://github.com/maziggy/bambuddy/issues/290)) — Printers can now be added using hostnames (e.g., `printer.local`, `my-printer.home.lan`) in addition to IPv4 addresses. Updated backend validation, frontend forms, and all locale labels.
- **Camera View Controls** ([#291](https://github.com/maziggy/bambuddy/issues/291)) — Added chamber light toggle and skip objects buttons to both embedded camera viewer and standalone camera page. Extracted skip objects modal into a reusable `SkipObjectsModal` component shared across PrintersPage and both camera views.
- **Per-Filament Spoolman Usage Tracking** ([#277](https://github.com/maziggy/bambuddy/pull/277)) — Accurate per-filament usage tracking for Spoolman integration with G-code parsing. Parses 3MF files at print start to build per-layer, per-filament extrusion maps. Reports accurate partial usage when prints fail or are cancelled based on actual layer progress. Tracking data stored in database to survive server restarts. Uses Spoolman's filament density for mm-to-grams conversion. Prefers `tray_uuid` over `tag_uid` for spool identification.
- **Disable AMS Weight Sync Setting** ([#277](https://github.com/maziggy/bambuddy/pull/277)) — New toggle to prevent AMS percentage-based weight estimates from overwriting Spoolman's granular usage-based calculations. Includes conditional "Report Partial Usage for Failed Prints" toggle.
- **Home Assistant Environment Variables** ([#283](https://github.com/maziggy/bambuddy/issues/283)) — Configure Home Assistant integration via `HA_URL` and `HA_TOKEN` environment variables for zero-configuration add-on deployments. Auto-enables when both variables are set. UI fields become read-only with lock icons when env-managed. Database values preserved as fallback.
- **Spoolman Fill Level for AMS Lite / External Spools** ([#293](https://github.com/maziggy/bambuddy/issues/293)) — AMS Lite (no weight sensor) always reported 0% fill level. Now uses Spoolman's remaining weight as a fallback when AMS reports 0%. External spools also show fill level from Spoolman data. Fill bars and hover cards indicate "(Spoolman)" when the data source is Spoolman rather than AMS.
- **Extended Support Bundle Diagnostics** — Support bundle now collects comprehensive diagnostic data for faster issue resolution: printer connectivity and firmware versions, integration status (Spoolman, MQTT, Home Assistant), network interfaces (subnets only), Python package versions, database health checks, Docker environment details, WebSocket connections, and log file info. All data properly anonymized — no IPs, names, or serials included. Privacy disclosure updated on System Info page.

### Improved
- **H2C Nozzle Rack — 6-Slot Display With Empty Placeholders** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — The nozzle rack card now always shows 6 rack positions (IDs 16–21), with filled slots showing diameter and empty slots showing placeholder dashes. L/R hotend nozzles (IDs 0, 1) are excluded from the rack card and shown in the dedicated L/R indicator instead.
- **H2 Series — L/R Nozzle Hover Card** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — New dual-nozzle hover card shows L and R nozzle details side by side (diameter, type, flow, status, wear, max temp, serial). Active nozzle highlighted in amber with Active/Idle status based on `active_extruder`, replacing the misleading "Docked" label.
- **H2 Series — Single-Nozzle Hover Card** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — H2D/H2S printers with a single nozzle now show extended nozzle details (wear, serial, max temp) on hover over the temperature card. Backend changed from H2C-only (>2 nozzles) to all H2 series (any nozzle_info present).
- **H2C Nozzle Rack — Translate Type Codes & Add Flow Info** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — Raw nozzle type codes (e.g. "HS", "HH01") are now translated to human-readable names: material (Hardened Steel, Stainless Steel, Tungsten Carbide) and flow type (High Flow, Standard). New "Flow" row in the hover card. Translations added in all 4 locales (en, de, ja, it).
- **H2C Nozzle Rack — Show Filament Material in Hover Card** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — Nozzle hover card now shows the loaded filament material type (e.g. "PLA", "PETG") alongside the color swatch, captured from MQTT nozzle info data.
- **H2C Nozzle Rack — Resolve Filament Names From Cloud & Local Profiles** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — Nozzle rack hover card previously showed raw filament IDs like "GFU99" instead of human-readable names. Now resolves filament names with a 4-tier fallback: Bambu Cloud preset lookup → local slicer profiles → built-in filament name table (86 known Bambu filament codes) → raw ID fallback. The built-in table resolves names like "Bambu ASA", "Generic TPU", "Generic PLA" when the cloud API returns 400 for certain filament IDs. Also benefits AMS tray tooltips.
- **H2C Nozzle Rack Compact Layout** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — Redesigned nozzle rack from a 2×3 grid to a compact single-row layout with bottom accent bars (green = mounted, gray = docked). Temperature cards are thinner, rack card is wider (flex-[2]), and all cards vertically centered.
- **Firmware Version Badge on Printer Card** ([#311](https://github.com/maziggy/bambuddy/issues/311)) — Printer cards now show a firmware version badge (when firmware checking is enabled). Green with checkmark when up to date, orange with download icon when an update is available. Clicking the badge opens a firmware info modal showing release notes (auto-expanded when up to date) or the existing update workflow. Badge and modal respect `firmware:read` and `firmware:update` permissions. Translations added in all 4 locales.
- **Auto-Detect Subnet for Printer Discovery** — Docker users no longer need to manually enter a subnet in the Add Printer dialog. Bambuddy auto-detects available network subnets and pre-selects the first one. When multiple subnets are available (e.g., eth0 + wlan0), a dropdown lets users choose. Falls back to manual text input if no subnets are detected.
- **Japanese Locale Complete Overhaul** — Restructured `ja.ts` from a divergent format (different key structure, 12 structural conflicts, 1,366 missing translations) to match the English/German locale structure exactly. Translated all 2,083 keys into Japanese, achieving full parity with EN/DE. Zero structural divergences, zero missing keys.

### Fixed
- **Nozzle Rack Hides 0% Wear** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — New nozzles with 0% wear showed no wear info in the hover card because the condition treated 0 the same as "not available." Now displays "Wear: 0%" correctly. The field is still hidden when the printer doesn't report wear data.
- **Nozzle Rack Shows L/R Hotend Nozzles in Rack** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — The nozzle rack card incorrectly included L/R hotend nozzles (IDs 0, 1) alongside the 6 rack slots. Now filters to IDs >= 2 (rack only) and always pads to 6 positions with empty placeholders.
- **H2C Firmware Update Downloads Wrong Firmware** ([#311](https://github.com/maziggy/bambuddy/issues/311)) — H2C printers were mapped to the H2D firmware API key (`h2d`), causing firmware checks to offer H2D firmware instead of H2C firmware. H2C has its own firmware track (01.01.x.x vs H2D's 01.02.x.x). Added separate `h2c` API key mapping. Also added missing H2C/H2S entries to printer model ID and 3MF model maps.
- **Sidebar Links Custom Icons Have Inverted Colors** ([#308](https://github.com/maziggy/bambuddy/issues/308)) — Custom uploaded icons in sidebar links had their colors inverted in dark mode due to a CSS `invert()` filter. The filter was intended for monochrome preset icons but was incorrectly applied to user-uploaded images (e.g., full-color logos). Removed the invert filter from custom icon rendering in the sidebar and the add/edit link modal.
- **Virtual Printer FTP Transfer Fails With Connection Reset** ([#58](https://github.com/maziggy/bambuddy/issues/58)) — Large 3MF uploads to the virtual printer intermittently failed with `[Errno 104] Connection reset by peer` while the small verify_job always succeeded. The `_handle_data_connection` callback returned immediately, allowing the asyncio server-handler task to complete while the data connection was still in active use. The passive port listener also stayed open during transfers, risking duplicate data connections. Fixed by keeping the callback alive until the transfer completes (`_transfer_done` event), closing the passive listener after accepting the connection, and rejecting duplicate data connections. Also added a 5-second drain timeout to MQTT status pushes to prevent blocking when the slicer is busy uploading.
- **Virtual Printer IP Override for Server Mode** ([#52](https://github.com/maziggy/bambuddy/issues/52)) — The `remote_interface_ip` setting (network interface override) was only used in proxy mode, but users with multiple network interfaces (LAN + Tailscale, Docker bridges) also needed it in server modes (immediate/review/print_queue). Auto-detected IP from `_get_local_ip()` followed the OS default route, causing wrong IP in TLS certificate SAN (handshake failures) and SSDP broadcasts (slicer can't discover printer). Now the interface override applies to all modes: included in certificate SAN, passed to SSDP server as advertise IP, and triggers service restart on change. UI dropdown shown for all modes when enabled (not just proxy).
- **Wrong Thumbnail When Reprinting Same Project** ([#314](https://github.com/maziggy/bambuddy/issues/314)) — Reprinting a project with the same name but a different bed layout showed the old thumbnail during printing. The cover image cache was keyed by `subtask_name` and never invalidated between prints, so a cache hit returned the stale first-print thumbnail. Now the cover cache is cleared on every print start.
- **Wrong Timelapse Attached to Archive** ([#315](https://github.com/maziggy/bambuddy/issues/315)) — After a print, the archive could receive a timelapse from a previous print instead of the just-completed one. The auto-scan sorted MP4 files by mtime and grabbed the "most recent," but in LAN-only mode (no NTP) the printer's clock is wrong, making mtime unreliable. Replaced with a snapshot-diff approach: baseline existing files before waiting, then detect the new file that appears after encoding. Falls back to print-name matching if no new file is found after retries.
- **Timelapse Not Attached — Baseline Race Condition** ([#315](https://github.com/maziggy/bambuddy/issues/315)) — Follow-up to the snapshot-diff timelapse fix: the baseline of existing MP4 files was captured at print completion time inside a background task, but fast-encoding printers could finish writing the timelapse before the baseline was taken, causing the new file to appear in the baseline and never be detected as "new." Moved baseline capture to print start time, when the timelapse file cannot possibly exist yet. Falls back to completion-time baseline if the app was restarted mid-print.
- **Calibration Prints Archived** ([#315](https://github.com/maziggy/bambuddy/issues/315)) — Standalone calibration prints (flow, vibration, bed leveling) were being archived as regular prints. The calibration gcode (`/usr/etc/print/auto_cali_for_user.gcode`) and other internal printer files under `/usr/` are now detected and skipped during print start.
- **Camera Stop 401 When Auth Enabled** — Camera stop requests (`sendBeacon`) failed with 401 Unauthorized when authentication was enabled because `sendBeacon` cannot send auth headers. Replaced with `fetch` + `keepalive: true` which supports Authorization headers while remaining reliable during page unload.
- **Spoolman Creates Duplicate Spools on Startup** ([#295](https://github.com/maziggy/bambuddy/pull/295)) — Each AMS tray independently fetched all spools from Spoolman, causing redundant API calls and duplicate spool creation with large databases (300+ spools). Now fetches spools once and reuses cached data across all tray operations. Added retry logic (3 attempts, 500ms delay) with connection recreation for transient network errors.
- **Filament Usage Charts Inflated by Quantity Multiplier** ([#229](https://github.com/maziggy/bambuddy/issues/229)) — Daily, weekly, and filament-type charts were multiplying `filament_used_grams` by print quantity, even though the value already represents the total for the entire job. A 26-object print using 126g was counted as 3,276g. Removed the erroneous multiplier from three aggregations in `FilamentTrends.tsx`.
- **Energy Cost Shows 0.00 in "Total Consumption" Mode** ([#284](https://github.com/maziggy/bambuddy/issues/284)) — Statistics Quick Stats showed 0.00 energy cost when Energy Display Mode was set to "Total Consumption" with Home Assistant smart plugs. The `homeassistant_service` was not configured with HA URL/token before querying plug energy data, causing it to silently return nothing.
- **H2D Pro Prints Fail at ~75% With Extrusion Motor Overload** ([#245](https://github.com/maziggy/bambuddy/issues/245)) — H2D Pro firmware interprets `use_ams: 1` (integer) as a nozzle index, routing filament to the deputy nozzle instead of the main nozzle. Bambu Studio sends `use_ams: true` (boolean) while using integers for other fields. Fixed by keeping `use_ams` as boolean for all printers including H2D series.
- **GitHub Backup Description Misleading** — The "App Settings" backup card said "excludes sensitive data" but the complete database is pushed. Updated description to "complete database."
- **Support Bundle Shows 0 AMS Units** — The support info always reported `ams_unit_count: 0` because it expected `raw_data["ams"]` to be a nested dict (`{"ams": [...]}`) but the MQTT handler stores it as a flat list. Now handles both formats.
- **Firmware Badge Shown for Models Without API Data** ([#311](https://github.com/maziggy/bambuddy/issues/311)) — Printers whose model has no firmware data in Bambu Lab's API (e.g. H2C on public beta firmware) showed a misleading green "up to date" badge. The badge is now hidden when the API returns no `latest_version`, since there is nothing to compare against.
- **AMS-HT Mapping Fails for Left Nozzle on H2D Pro** ([#318](https://github.com/maziggy/bambuddy/issues/318)) — Printing with the left nozzle on dual-nozzle printers (H2D/H2D Pro) using AMS-HT failed with "Failed to get AMS mapping table." The global tray ID for AMS-HT units (ams_id >= 128) was calculated as `ams_id * 4 + tray_id` (= 512), but AMS-HT uses the raw `ams_id` (128) since it has a single tray. The backend then misidentified 512 as an external spool. Fixed in frontend tray ID calculation, backend `ams_mapping2` builder, print scheduler, and Spoolman tracking.
- **H2D Pro L/R Nozzle Hover Card Swapped** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — The dual-nozzle hover card had left and right nozzles swapped: nozzle_rack id 0 (extruder 0 = right) was shown as left and vice versa. Serial number and max temp now correctly appear only on the right (removable) nozzle column.
- **H2C Printer Card Shows H2D Image** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — The H2C printer card displayed the H2D printer image because no dedicated H2C image existed in the frontend. Added H2C image and updated `getPrinterImage()` to return it for H2C models.
- **H2C Nozzle Rack Shows Wrong Empty Slot and Missing Filament Colors** ([#300](https://github.com/maziggy/bambuddy/issues/300)) — Empty rack slots always appeared at position 6 instead of their actual position because nozzles were mapped by array index instead of by ID. Fixed by mapping each nozzle to its correct rack position (`id - 16`). Filament colors and materials were missing because the H2C uses different MQTT field names (`color_m`, `fila_id`, `sn`, `tm`) than the H2D (`filament_colour`, `filament_id`, `serial_number`, `max_temp`). Added fallback field name resolution. Also fixed nozzle rack layout breaking on medium card size by allowing the temperature row to wrap.

### Documentation
- **Advanced Auth via Email** — Updated README, website features page, and wiki authentication guide with SMTP setup, self-service password reset, admin password reset, email templates, and advanced auth overview.
- **Supported Printers Updated** — Updated README, website, and wiki to list all 12 supported Bambu Lab printer models: X1, X1C, X1E, P1P, P1S, P2S, A1, A1 Mini, H2D, H2D Pro, H2C, H2S. Removed outdated "Testers Needed" messaging and Tested/Needs Testing distinctions — all models are now uniformly listed as supported. Added H2C printer image to website. Added H2D Pro, H2C columns to wiki feature comparison tables and new P2 Series section.
- **CONTRIBUTING.md: i18n & Authentication Guides** — Added Internationalization (i18n) section with locale file conventions, code examples, and parity rules. Added Authentication & Permissions section covering the opt-in auth pattern, permission conventions, and default group structure.
- **Proxy Mode Security Warning** — Added FTP data channel security warning to wiki, README, and website. Bambu Studio does not encrypt the FTP data channel despite negotiating PROT P; MQTT and FTP control channels are fully TLS-encrypted. VPN (Tailscale/WireGuard) recommended for full data encryption.
- **Docker Proxy Mode Ports** — Documented FTP passive data ports 50000-50100 required for proxy mode in Docker bridge mode. Updated port mappings in wiki virtual-printer and docker guides.
- **SSDP Discovery Limitations** — Added table showing when SSDP discovery works (same LAN, dual-homed, Docker host mode) vs when manual IP entry is required (VPN, Docker bridge, port forwarding). Updated wiki, README, and website.
- **Firewall Rules Updated** — Added port 50000-50100/tcp to all UFW, firewalld, and iptables examples for proxy mode FTP passive data.

### Testing
- **Mock FTPS Server & Comprehensive FTP Test Suite** — Added 67 automated test cases against a real implicit FTPS mock server, covering every known FTP failure mode from 0.1.8+:
  - Mock server (`mock_ftp_server.py`) implements implicit TLS, custom AVBL command, and per-command failure injection
  - Connection tests: auth, SSL modes (prot_p/prot_c), timeout, cache, disconnect edge cases
  - Upload tests: chunked transfer via `transfercmd()`, progress callbacks, 553/550/552 error handling
  - Download tests: bytes, to-file, 0-byte regression, large files, missing file cleanup
  - Model-specific tests: X1C session reuse, A1/A1 Mini prot_c fallback, P1S, unknown model defaults
  - Async wrapper tests: upload/download/list/delete with A1 fallback and multi-path download
  - Failure injection tests: regressions for `error_perm` hierarchy, `diagnose_storage` CWD propagation, injection count decrement
  - Added `pyOpenSSL` to `requirements-dev.txt` for Docker test image compatibility
- **Nozzle Rack Tests** — Backend: 7 tests for MQTT nozzle_info parsing (H2C 8-entry, H2D 2-entry, H2S single, empty, sorting, field mapping, nozzle state updates). Frontend: 3 tests for rack card rendering (H2C shows 6 slots, empty placeholders, hidden when no rack IDs).

## [0.1.8.1] - 2026-02-07

### Fixed
- **FTP Upload Broken on All Printer Models** — Fixed critical bug where all FTP uploads failed with "550 Failed to change directory":
  - `diagnose_storage()` was running before every upload, and its CWD failures (`ftplib.error_perm`) were not caught because `error_perm` is not a subclass of `error_reply`
  - Removed `diagnose_storage()` from the upload hot path
  - Changed all FTP exception handlers from `except (OSError, ftplib.error_reply)` to `except (OSError, ftplib.Error)` to catch all FTP error types
- **HTTP 500 on Reprint and Print Endpoints** — Fixed 500 errors on `/api/v1/archives/{id}/reprint` and `/api/v1/library/files/{id}/print` caused by the FTP failure above
- **Exception Handling Reverted** — Reverted overly-narrow exception handling introduced in 0.1.8 that could cause uncaught errors in archive parsing, HTTP clients, 3MF/ZIP processing, Home Assistant, and firmware checks
- **HTTP 500 on Printer Cover Image** — Fixed 500 error on `/api/v1/printers/{id}/cover` when FTP download returned 0 bytes but reported success; now retries and falls back to 404
- **4-Segment Version Support** — Version parser now supports patch releases like `0.1.8.1` for hotfixes without incrementing the minor version

## [0.1.8] - 2026-02-06

### Security
- **XML External Entity (XXE) Prevention**:
  - Replaced `xml.etree.ElementTree` with `defusedxml` across all 3MF parsing code
  - Prevents XXE attacks through malicious 3MF files
  - Detected by Bandit B314 security scanner
- **Path Injection Vulnerabilities Fixed**:
  - Added path traversal validation to project attachment endpoints
  - Strengthened filename sanitization in timelapse processing
  - Prevents directory traversal attacks via `../` sequences
  - Detected by CodeQL security scanner
- **Security Scanning in CI/CD**:
  - Added Bandit (Python security analyzer) with SARIF upload to GitHub Security
  - Added Trivy (container/IaC scanner) for Docker image and Dockerfile analysis
  - Added pip-audit and npm-audit for dependency vulnerability scanning
  - Automatic GitHub issue creation for detected vulnerabilities
  - Security scan results visible in GitHub Security tab
- **CodeQL Zero-Finding Baseline**:
  - Reduced CodeQL findings from 591 to 0 across Python, JavaScript, and GitHub Actions
  - Created custom query suites (`.codeql/python-bambuddy.qls`, `.codeql/javascript-bambuddy.qls`) with documented accepted-risk exclusions
  - All exclusions reviewed and justified (log injection parameterized, cyclic imports from SQLAlchemy ORM, intentional 0.0.0.0 binds, etc.)
- **Log Injection Prevention**:
  - Converted ~700 f-string log calls to parameterized `%s` style across all backend files
  - Prevents log injection via newlines or fake log entries in user-controlled data
- **Exception Handling Hardened**:
  - Narrowed ~265 bare `except Exception` blocks to specific types (`OSError`, `KeyError`, `ValueError`, `zipfile.BadZipFile`, `sqlalchemy.exc.OperationalError`, etc.)
- **Stack Trace Exposure Fixed**:
  - Replaced `str(e)` with generic error messages in HTTP responses (`updates.py`)
  - Detailed errors still logged server-side for debugging
- **SSRF Mitigations Added**:
  - Home Assistant integration: URL scheme/hostname validation, metadata-service blocking (`homeassistant.py`)
  - Tasmota integration: IP validation blocking loopback and link-local addresses (`tasmota.py`)
- **Hashlib Security Annotations**:
  - Added `usedforsecurity=False` to non-security hash calls (MD5 for AMS fingerprinting, SHA1 for git blob format)
- **Unused Code Removal**:
  - Removed ~30 redundant function-level imports, unused variables, dead code, and trivial conditions flagged by CodeQL
- **Local Security Scanner Improvements**:
  - `test_security.sh` uses `--threads=0` for all CodeQL commands (auto-detects CPU cores)
  - Added `.trivyignore` to suppress accepted Dockerfile USER directive finding

### Enhancements
- **Per-Filament Spoolman Usage Tracking** (PR #277):
  - Reports exact filament consumption per spool to Spoolman after each print
  - Parses G-code from 3MF files for layer-by-layer extrusion data (multi-material support)
  - New setting: "Disable AMS Estimated Weight Sync" to prefer Spoolman usage tracking over AMS weight estimates
  - New setting: "Report Partial Usage for Failed Prints" estimates filament used up to the failure point based on layer progress
  - Persists tracking data in SQLite for reliability across restarts
  - Extracted Spoolman tracking into dedicated service module with DRY helpers
- **3D Model Viewer Improvements** (PR #262):
  - Added plate selector for multi-plate 3MF files with thumbnail previews
  - Object count display shows number of objects per plate and total
  - Fullscreen toggle for immersive model viewing
  - Resizable split view between plate selector and 3D viewer in fullscreen mode
  - Pagination support for files with many plates (e.g., 50+ plates)
  - Added i18n translations for all model viewer strings (English, German, Japanese)
- **Virtual Printer Proxy Mode Improvements**:
  - SSDP proxy for cross-network setups: select slicer network interface for automatic printer discovery via SSDP relay
  - FTP proxy now listens on privileged port 990 (matching Bambu Studio expectations) instead of 9990
  - For systemd: requires `AmbientCapabilities=CAP_NET_BIND_SERVICE` capability
  - Automatic directory permission checking at startup with clear error messages for Docker/bare metal
  - Updated translations for proxy mode steps in English, German, and Japanese

### Fixed
- **Authentication Required Error After Initial Setup** (Issue #257):
  - Fixed "Authentication required" error when using printer controls after fresh install with auth enabled
  - Token clearing on 401 responses is now more selective - only clears on invalid token messages
  - Generic "Authentication required" errors (which may be timing issues) no longer clear the token
  - Also fixed smart plug discovery scan endpoints missing auth headers
- **Filament Hover Card Overlapping Navigation Bar** (Issue #259):
  - Fixed filament info popup being partially covered by the navigation bar
  - Hover card positioning now accounts for the fixed 56px header
  - Cards near the top of the page now correctly flip to show below the slot
- **Filament Statistics Incorrectly Multiplied by Quantity** (Issue #229):
  - Fixed filament totals being inflated by incorrectly multiplying by quantity
  - The `filament_used_grams` field already contains the total for the entire print job
  - Removed incorrect `* quantity` multiplication from archive stats, Prometheus metrics, and FilamentTrends chart
  - Example: A print with 26 objects using 126g was incorrectly shown as 3,276g
- **Print Queue Status Does Not Match Printer Status** (Issue #249):
  - Queue now shows "Paused" when the printer is paused instead of "Printing"
  - Fetches real-time printer state for actively printing queue items
  - Added translations for paused status in English, German, and Japanese
- **Queue Scheduled Time Displayed in Wrong Timezone** (Issue #233):
  - Fixed scheduled time being displayed in UTC instead of local timezone when editing queue items
  - The datetime picker now correctly shows and saves times in the user's local timezone
- **Mobile Layout Issues on Archives and Statistics Pages** (Issue #255):
  - Fixed header buttons overflowing outside the screen on iPhone/mobile devices
  - Headers now stack vertically on small screens with proper wrapping
  - Applied consistent responsive pattern from PrintersPage
- **AMS Auto-Matching Selects Wrong Slot** (Issue #245):
  - Fixed AMS slot mapping when multiple trays have the same `tray_info_idx` (filament type identifier)
  - `tray_info_idx` (e.g., "GFA00" for generic PLA) identifies filament TYPE, not unique spools
  - When multiple trays match the same type, color is now used as a tiebreaker
  - Previously used `find()` which always returned the first match regardless of color
  - Fixed in both backend (print_scheduler.py) and frontend (useFilamentMapping.ts)
  - Resolves wrong tray selection (e.g., A4 instead of B1) when multiple AMS units have same filament type
- **A1/A1 Mini FTP Upload Failures** (Issue #271):
  - Fixed FTP uploads hanging/timing out on A1 and A1 Mini printers
  - Replaced `storbinary()` with manual chunked transfer using `transfercmd()`
  - A1's FTP server has issues with Python's `storbinary()` waiting for completion response
  - Uses 1MB chunks with explicit 120s socket timeout for reliable transfers
  - Works for all printer models (X1C, P1S, P1P, A1, A1 Mini)
- **P1S/P1P FTP Upload Failures**:
  - Fixed FTP uploads failing with EOFError on P1S and P1P printers
  - These printers use vsFTPd which requires SSL session reuse on data channel
  - Removed P1S/P1P from skip-session-reuse list (they were incorrectly added)
- **FTP Auto-Detection for A1 Printers**:
  - Automatically detects working FTP mode (prot_p vs prot_c) for A1/A1 Mini
  - Tries encrypted data channel first, falls back to clear if needed
  - Caches working mode per printer IP to avoid repeated detection
- **Safari Camera Stream Failing**:
  - Fixed camera streams not loading in Safari due to Service Worker error
  - Safari has stricter Service Worker scope requirements
- **Queue Print Time for Multi-Plate Files** (PR #274):
  - Fixed print time showing total for all plates instead of selected plate
  - Now extracts per-plate print time from 3MF slice_info.config
  - Contributed by MisterBeardy
- **Docker Permissions**:
  - Added user directive to docker-compose.yml using PUID/PGID environment variables
  - Allows container to run as host user, fixing permission issues with bind-mounted volumes
  - Usage: `PUID=$(id -u) PGID=$(id -g) docker compose up -d`

### Added
- **Windows Portable Launcher** (contributed by nmori):
  - New `start_bambuddy.bat` for Windows users - double-click to run, no installation required
  - Automatically downloads Python 3.13 and Node.js 22 on first run (portable, no system changes)
  - Everything stored in `.portable\` folder for easy cleanup
  - Commands: `start_bambuddy.bat` (launch), `start_bambuddy.bat update` (update deps), `start_bambuddy.bat reset` (clean start)
  - Custom port via `set PORT=9000 & start_bambuddy.bat`
  - Verifies all downloads with SHA256 checksums for security
  - Supports both x64 and ARM64 Windows systems

## [0.1.7] - 2026-02-03

### Security
- **Critical: Missing API Endpoint Authentication** (CVE-2026-25505, CVSS 9.8):
  - Added authentication to 200+ API endpoints that were previously unprotected
  - All route files now use `RequirePermissionIfAuthEnabled()` for permission checks
  - Protected endpoints: archives, projects, settings, API keys, groups, cloud, notifications, maintenance, filaments, external links, smart plugs, discovery, firmware, camera, k-profiles, AMS history, pending uploads, updates, spoolman, system, print queue, printers
  - Image-serving endpoints (thumbnails, timelapse, photos, camera streams) remain public as they require knowing the resource ID and are loaded via `<img>` tags which cannot send Authorization headers
  - Backend integration tests added to verify endpoint authentication enforcement

### Enhancements
- **TOTP Authenticator Support for Bambu Cloud** (Issue #182):
  - Added support for TOTP-based two-factor authentication when connecting to Bambu Cloud
  - Accounts with authenticator apps (Google Authenticator, Authy, etc.) now work correctly
  - Proper detection of verification type: email code vs TOTP code
  - Uses browser-like headers to bypass Cloudflare protection on TFA endpoint
  - Frontend shows appropriate message for each verification type
  - Added translations for TOTP UI in English, German, and Japanese
- **Spoolman: Open in Spoolman Button** (Issue #210):
  - FilamentHoverCard now shows "Open in Spoolman" button when spool is already linked in Spoolman
  - Button links directly to the spool's page in Spoolman for quick editing
  - "Link to Spoolman" button now only shows when spool is not yet linked
  - Link button correctly disabled when no unlinked spools are available in Spoolman
  - Toast notification shown on successful/failed spool linking
  - Added `/api/v1/spoolman/spools/linked` endpoint returning map of linked spool tags to IDs
- **Complete German Translations**:
  - All UI strings now fully translated to German (1800+ translation keys)
  - Pages translated: Settings, Archives, File Manager, Queue, Printers, Profiles, Projects, Stats, Maintenance, Camera, Groups, Users, Login, Setup, Stream Overlay
  - Components translated: ConfirmModal, LinkSpoolModal, FilamentHoverCard, Layout
  - Added locale parity test to ensure English and German stay in sync
- **Virtual Printer Proxy Mode**:
  - New "Proxy" mode allows remote printing over any network by relaying slicer traffic to a real printer
  - Configure a target printer and Bambuddy acts as a TLS proxy between your slicer and the printer
  - Supports both FTP (port 990) and MQTT (port 8883) protocols with full TLS encryption
  - Slicer connects to Bambuddy using the real printer's access code
  - Real-time status display showing active FTP/MQTT connections
  - Target printer selector with validation (must be configured in Bambuddy)
  - Proxy mode bypasses the access code requirement (uses the real printer's credentials)
  - Full i18n support for all proxy mode UI strings (English, German, Japanese)

### Fixed
- **Cannot Link Multiple HA Entities to Same Printer** (Issue #214):
  - Fixed Home Assistant entities being limited to one per printer
  - Both frontend and backend were blocking printers that already had any smart plug linked
  - Now only Tasmota plugs are limited to one per printer (physical device constraint)
  - Multiple HA entities (switches, scripts, lights, etc.) can be linked to the same printer
  - Restored "Show on Printer Card" toggle for HA entities to control visibility on printer cards
  - Fixed printer card only showing `script.*` entities; now shows all HA entities with toggle enabled
  - HA entities now default to auto_on=False and auto_off=False (appropriate for automations)
  - Printer cards now update immediately when HA entities are added/modified/deleted
- **Monthly Comparison Calculation Off** (Issue #229):
  - Fixed filament statistics not accounting for quantity multiplier
  - Monthly comparison chart now correctly multiplies `filament_used_grams` by `quantity`
  - Daily and weekly charts also now account for quantity
  - Filament type breakdown includes quantity in calculations
  - Backend stats endpoint (`/archives/stats`) and Prometheus metrics also fixed
  - Prints count now shows total items (sum of quantities) instead of archive count
- **Authentication Required for Downloads** (Issue #231):
  - Fixed support bundle download returning 401 Unauthorized when auth is enabled
  - Fixed archive export (CSV/XLSX) failing with authentication enabled
  - Fixed statistics export failing with authentication enabled
  - Fixed printer file ZIP download failing with authentication enabled
  - Root cause: These endpoints used raw `fetch()` without Authorization header
- **Queue Schedule Date Picker Ignores User Format Settings** (Issue #233):
  - Replaced native datetime picker with custom date/time inputs respecting user settings
  - Date input shows in user's format (DD/MM/YYYY for EU, MM/DD/YYYY for US, YYYY-MM-DD for ISO)
  - Time input shows in user's format (24H or 12H with AM/PM)
  - Calendar button opens native picker for convenience; selection is formatted to user's preference
  - Placeholder text shows expected format (e.g., "DD/MM/YYYY" or "HH:MM AM/PM")
  - Added date utilities: `formatDateInput`, `parseDateInput`, `getDatePlaceholder`
  - Added time utilities: `formatTimeInput`, `parseTimeInput`, `getTimePlaceholder`
- **500 Error on Archive Detail Page**:
  - Fixed internal server error when viewing individual archive details
  - Root cause: `project` relationship not eagerly loaded in `get_archive()` service method
  - Async SQLAlchemy requires explicit eager loading; lazy loading is not supported

## [0.1.6.2] - 2026-02-02

> **Security Release**: This release addresses critical security vulnerabilities. Users running authentication-enabled instances should upgrade immediately.

### Security
- **Critical: Hardcoded JWT Secret Key** (GHSA-gc24-px2r-5qmf, CWE-321) - Fixed hardcoded JWT secret key that could allow attackers to forge authentication tokens:
  - JWT secret now loaded from `JWT_SECRET_KEY` environment variable (recommended for production)
  - Falls back to auto-generated `.jwt_secret` file in data directory with secure permissions (0600)
  - Generates cryptographically secure 64-byte random secret if neither exists
  - **Action Required**: Existing users will need to re-login after upgrading
- **Critical: Missing API Authentication** (GHSA-gc24-px2r-5qmf, CWE-306) - Fixed 77+ API endpoints that lacked authentication checks:
  - Added HTTP middleware enforcing authentication on ALL `/api/` routes when auth is enabled
  - Only essential public endpoints are exempt (login, auth status, version check, WebSocket)
  - All other API calls now require valid JWT token or API key

### Enhancements
- **Location Filter for Queue** (Issue #220):
  - Filter queue jobs by printer location in the Queue page
  - "Any {Model}" queue assignments can now specify a target location (e.g., "Any X1C in Workshop")
  - Location filter dropdown shows all unique locations from printers and queue items
  - Location is saved with queue items and displayed in the queue list
- **Ownership-Based Permissions** (Issue #205):
  - Users can now only update/delete their own items unless they have elevated permissions
  - Update/delete permissions split into `*_own` and `*_all` variants:
    - `queue:update_own` / `queue:update_all`
    - `queue:delete_own` / `queue:delete_all`
    - `archives:update_own` / `archives:update_all`
    - `archives:delete_own` / `archives:delete_all`
    - `archives:reprint_own` / `archives:reprint_all`
    - `library:update_own` / `library:update_all`
    - `library:delete_own` / `library:delete_all`
  - Administrators group gets `*_all` permissions (can modify any items)
  - Operators group gets `*_own` permissions (can only modify their own items)
  - Ownerless items (legacy data without creator) require `*_all` permission
  - Bulk operations skip items user doesn't have permission to modify
  - User deletion now offers choice: delete user's items or keep them (become ownerless)
  - Backend enforces permissions on all API endpoints (not just frontend UI)
  - Automatic migration upgrades existing groups to new permission model
- **User Tracking for Archives, Library & Queue** (Issue #206):
  - Track and display who uploaded each archive file
  - Track and display who uploaded each library file (File Manager)
  - Track and display who added each print job to the queue
  - Shows username on archive cards, library files, queue items, and printer cards (while printing)
  - Works when authentication is enabled; gracefully hidden when auth is disabled
  - Database migration adds `created_by_id` columns to `print_archives`, `library_files`, and `print_queue` tables
- **Separate AMS RFID Permission** (Issue #204):
  - Added new `printers:ams_rfid` permission for re-reading AMS RFID tags
  - Allows granting RFID re-read access without full printer control permissions
  - Operators group includes this permission by default
  - Available in Settings > Users > Group Editor as a toggleable permission
- **Schedule Button on Archive Cards** (Issue #208):
  - Added "Schedule" button next to "Reprint" on archive cards for quick access to print scheduling
  - Previously only available in the context menu (right-click)
  - Respects `queue:create` permission for users with restricted access
- **Streaming Overlay Improvements** (Issue #164):
  - **Configurable FPS**: Add `?fps=30` parameter to control camera frame rate (1-30, default 15)
  - **Status-only mode**: Add `?camera=false` parameter to hide camera and show only status overlay on black background
  - Increased default camera FPS from 10 to 15 for smoother video across all camera views
- **Simplified Backup/Restore System**:
  - Complete backup now creates a single ZIP file containing the entire database and all data directories
  - Includes: database, archives, library files, thumbnails, timelapses, icons, projects, and plate calibration data
  - Portable backups: works across different installations and data directories
  - Faster backup/restore: direct file copy instead of JSON export/import
  - Progress indicator and navigation blocking during backup/restore operations
  - Removed ~2000 lines of legacy JSON-based backup/restore code

### Fixes
- **File Manager permissions not enforced** (Issue #224) - Fixed backend not checking `library:read` permission for File Manager endpoints:
  - Added `library:read` permission check to all list/view endpoints (files, folders, stats)
  - Added `library:upload` permission check to upload and folder creation endpoints
  - Added `queue:create` permission check to add-to-queue endpoint
  - Added `printers:control` permission check to direct print endpoint
  - Added ownership-based permission checks to file move operation
  - Users without `library:read` permission can no longer view files in the File Manager
  - Users can now only delete/update their own files unless they have `*_all` permissions
- **JWT secret key not persistent across restarts** - Fixed JWT secret key generation to properly use data directory, ensuring tokens remain valid across container restarts
- **Images/thumbnails returning 401 when auth enabled** - Fixed auth middleware to allow public access to image/media endpoints (thumbnails, photos, QR codes, timelapses, camera streams) since browser elements like `<img>` don't send Authorization headers
- **Library thumbnails missing after restore** - Fixed library files using absolute paths that break after restore on different systems:
  - Library now stores relative paths in database for portability
  - Automatic migration converts existing absolute paths to relative on startup
  - Thumbnails and files now display correctly after restoring backups
- **File uploads failing with authentication enabled** - Fixed all file upload functions (archives, photos, timelapses, library files, etc.) not sending authentication headers when auth is enabled
- **External spool AMS mapping causing "Failed to get AMS mapping table"** (Issue #213) - Fixed external spool `ams_mapping2` slot_id handling that caused AMS mapping failures
- **Filename matching for files with spaces** (Issue #218) - Fixed file detection when filenames contain spaces
- **P2S FTP upload failure** (Issue #218) - Fixed FTP uploads to P2S printers by passing `skip_session_reuse` to ImplicitFTP_TLS
- **Printer deletion freeze** (Issue #214) - Fixed UI freeze when deleting printers, and now allows multiple smart plugs per printer
- **Stack trace exposure in error responses** (CodeQL Alert #68) - Fixed stack traces being exposed in API error responses in archives.py
- **Printer serial numbers exposed in support bundle** (Issue #216) - Sanitized printer serial numbers in support bundle logs for privacy
- **Missing sliced_for_model migration** (Issue #211) - Fixed database migration for `sliced_for_model` column that was missing in some upgrade paths

## [0.1.6-final] - 2026-01-31

### New Features
- **Group-Based Permissions** - Granular access control with user groups:
  - Create custom groups with specific permissions (50+ granular permissions)
  - Default system groups: Administrators (full access), Operators (control printers), Viewers (read-only)
  - Users can belong to multiple groups with additive permissions
  - Permission-based UI: buttons/features disabled when user lacks permission
  - Groups management page in Settings → Users → Groups tab
  - Change password: users can change their own password from sidebar
  - Included in backup/restore
- **STL Thumbnail Generation** - Auto-generate preview thumbnails for STL files (Issue #156):
  - Checkbox option when uploading STL files to generate thumbnails automatically
  - Batch generate thumbnails for existing STL files via "Generate Thumbnails" button
  - Individual file thumbnail generation via context menu (three-dot menu)
  - Works with ZIP extraction (generates thumbnails for all STL files in archive)
  - Uses trimesh and matplotlib for 3D rendering with Bambu green color theme
  - Thumbnails auto-refresh in UI after generation
  - Graceful handling of complex/invalid STL files
- **Streaming Overlay for OBS** - Embeddable overlay page for live streaming with camera and print status (Issue #164):
  - All-in-one page at `/overlay/:printerId` combining camera feed with status overlay
  - Real-time print progress, ETA, layer count, and filename display
  - Bambuddy logo branding (links to GitHub)
  - Customizable via query parameters: `?size=small|medium|large` and `?show=progress,layers,eta,filename,status,printer`
  - No authentication required - designed for OBS browser source embedding
  - Gradient overlay at bottom for readable text over camera feed
  - Auto-reconnect on camera stream errors
- **MQTT Smart Plug Support** - Add smart plugs that subscribe to MQTT topics for energy monitoring (Issue #173):
  - New "MQTT" plug type alongside Tasmota and Home Assistant
  - Subscribe to any MQTT topic (Zigbee2MQTT, Shelly, Tasmota discovery, etc.)
  - **Separate topics per data type**: Configure different MQTT topics for power, energy, and state
  - Configurable JSON paths for data extraction (e.g., `power_l1`, `data.power`)
  - **Separate multipliers**: Individual multiplier for power and energy (e.g., mW→W, Wh→kWh)
  - **Custom ON value**: Configure what value means "ON" for state (e.g., "ON", "true", "1")
  - Monitor-only: displays power/energy data without control capabilities
  - Reuses existing MQTT broker settings from Settings → Network
  - Energy data included in statistics and per-print tracking
  - Full backup/restore support for MQTT plug configurations
- **Disable Printer Firmware Checks** - New toggle in Settings → General → Updates to disable printer firmware update checks:
  - Prevents Bambuddy from checking Bambu Lab servers for firmware updates
  - Useful for users who prefer to manage firmware manually or have network restrictions
- **Archive Plate Browsing** - Browse plate thumbnails directly in archive cards (Issue #166):
  - Hover over archive card to reveal plate navigation for multi-plate files
  - Left/right arrows to cycle through plate thumbnails
  - Dot indicators show current plate (clickable to jump to specific plate)
  - Lazy-loads plate data only when user hovers
- **GitHub Profile Backup** - Automatically backup your Cloud profiles, K-profiles and settings to a GitHub repository:
  - Configure GitHub repository URL and Personal Access Token
  - Schedule backups hourly, daily, or weekly
  - Manual on-demand backup trigger
  - Backs up K-profiles (per-printer), cloud profiles, and app settings
  - Skip unchanged commits (only creates commit when data changes)
  - Real-time progress tracking during backup
  - Backup history log with status and commit links
  - Requires Bambu Cloud login for full profile access
  - New Settings → Backup & Restore tab (local backup/restore moved here)
  - Included in local backup/restore (except PAT for security)
- **Plate Not Empty Notification** - Dedicated notification category for build plate detection:
  - New toggle in notification provider settings (enabled by default)
  - Sends immediately (bypasses quiet hours and digest mode)
  - Separate from general printer errors for granular control
- **USB Camera Support** - Connect USB webcams directly to your Bambuddy host:
  - New "USB Camera (V4L2)" option in external camera settings
  - Auto-detection of available USB cameras via V4L2
  - API endpoint to list connected USB cameras (`GET /api/v1/printers/usb-cameras`)
  - Works with any V4L2-compatible camera on Linux
  - Uses ffmpeg for frame capture and streaming
- **Build Plate Empty Detection** - Automatically detect if objects are on the build plate before printing:
  - Per-printer toggle to enable/disable plate detection
  - Multi-reference calibration: Store up to 5 reference images of empty plates (different plate types)
  - Automatic print pause when objects detected on plate at print start
  - Push notification and WebSocket alert when print is paused due to plate detection
  - ROI (Region of Interest) calibration UI with sliders to focus detection on build plate area
  - Reference management: View thumbnails, add labels, delete references
  - Works with both built-in and external cameras
  - Uses buffered camera frames when stream is active (no blocking)
  - Split button UI: Main button toggles detection on/off, chevron opens calibration modal
  - Green visual indicator when plate detection is enabled
  - Included in backup/restore
- **Project Import/Export** - Export and import projects with full file support (Issue #152):
  - Export single project as ZIP (includes project settings, BOM, and all files from linked library folders)
  - Export all projects as JSON for metadata-only backup
  - Import from ZIP (with files) or JSON (metadata only)
  - Linked folders and files are automatically created on import
  - Useful for sharing complete project bundles or migrating between instances
- **BOM Item Editing** - Bill of Materials items are now fully editable:
  - Edit name, quantity, price, URL, and remarks after creation
  - Pencil icon on each BOM item to enter edit mode
- **Prometheus Metrics Endpoint** - Export printer telemetry for external monitoring systems (Issue #161):
  - Enable via Settings → Network → Prometheus Metrics
  - Endpoint: `GET /api/v1/metrics` (Prometheus text format)
  - Optional bearer token authentication for security
  - Printer metrics: connection status, state, temperatures (bed, nozzle, chamber), fans, WiFi signal
  - Print metrics: progress, remaining time, layer count
  - Statistics: total prints by status, filament used, print time
  - Queue metrics: pending and active jobs
  - System metrics: connected printers count
  - Labels include printer_id, printer_name, serial for filtering
  - Ready for Grafana dashboards
- **External Link for Archives** - Add custom external links to archives for non-MakerWorld sources (Issue #151):
  - Link archives to Printables, Thingiverse, or any other URL
  - Globe button opens external link when set, falls back to auto-detected MakerWorld URL
  - Edit via archive edit modal
  - Included in backup/restore
- **External Network Camera Support** - Add external cameras (MJPEG, RTSP, HTTP snapshot) to replace built-in printer cameras (Issue #143):
  - Configure per-printer external camera URL and type in Settings → Camera
  - Live streaming uses external camera when enabled
  - Finish photo capture uses external camera
  - Layer-based timelapse: captures frame on each layer change, stitches to MP4 on print completion
  - Test connection button to verify camera accessibility
- **Recalculate Costs Button** - New button on Dashboard to recalculate all archive costs using current filament prices (Issue #120)
- **Create Folder from ZIP** - New option in File Manager upload to automatically create a folder named after the ZIP file (Issue #121)
- **Multi-File Selection in Printer Files** - Printer card file browser now supports multiple file selection (Issue #144):
  - Checkbox selection for individual files
  - Select All / Deselect All buttons
  - Bulk download as ZIP when multiple files selected
  - Bulk delete for multiple files at once
- **Queue Bulk Edit** - Select and edit multiple queue items at once (Issue #159):
  - Checkbox selection for pending queue items
  - Select All / Deselect All in toolbar
  - Bulk edit: printer assignment, print options, queue options
  - Bulk cancel selected items
  - Tri-state toggles: unchanged / on / off for each setting

### Fixes
- **Multi-Plate Thumbnail in Queue** - Fixed queue items showing wrong thumbnail for multi-plate files (Issue #166):
  - Queue now displays the correct plate thumbnail based on selected plate
  - Previously always showed plate 1 thumbnail regardless of selection
- **A1/A1 Mini Shows Printing Instead of Idle** - Fixed incorrect status display for A1 series printers (Issue #168):
  - Some A1/A1 Mini firmware versions incorrectly report stage 0 ("Printing") when idle
  - Now checks gcode_state to correctly display "Idle" for affected printers
  - Fix only applies to A1 models with the specific buggy condition
- **HMS Error Notifications** - Get notified when printer errors occur (Issue #84):
  - Automatic notifications for HMS errors (AMS issues, nozzle problems, etc.)
  - Human-readable error messages (853 error codes translated)
  - Friendly error type names (Print/Task, AMS/Filament, Nozzle/Extruder, Motion Controller, Chamber)
  - Deduplication prevents spam from repeated error messages
  - Publishes to MQTT relay for home automation integrations
  - New "Printer Error" toggle in notification provider settings
- **Plate Calibration Persistence** - Fixed plate detection reference images not persisting after restart in Docker deployments
- **Telegram Notification Parsing** - Fixed Telegram markdown parsing errors when messages contain underscores (e.g., error codes)
- **Settings API PATCH Method** - Added PATCH support to `/api/settings` for Home Assistant rest_command compatibility (Issue #152)
- **P2S Empty Archive Tiles** - Fixed FTP file search for printers without SD card (Issue #146):
  - Added root folder `/` to search paths when looking for 3MF files
  - Printers without SD card store files in root instead of `/cache`
- **Empty AMS Slot Not Recognized** - Fixed bug where removed spools still appeared in Bambuddy (Issue #147):
  - Old AMS: Now properly applies empty values from tray data updates
  - New AMS (AMS 2 Pro): Now checks `tray_exist_bits` bitmask to detect and clear empty slots
- **Reprint Cost Tracking** - Reprinting an archive now adds the cost to the existing total, so statistics accurately reflect total filament expenditure across all prints
- **HA Energy Sensors Not Detected** - Home Assistant energy sensors with lowercase units (w, kwh) are now properly detected; unit matching is now case-insensitive (Issue #119)
- **File Manager Upload** - Upload modal now accepts all file types, not just ZIP files
- **Camera Zoom & Pan Improvements** - Enhanced camera viewer zoom/pan functionality (Issue #132):
  - Pan range now based on actual container size, allowing full navigation of zoomed image
  - Added pinch-to-zoom support for mobile/touch devices
  - Added touch-based panning when zoomed in
  - Both embedded camera viewer and standalone camera page updated
- **Progress Milestone Time** - Fixed milestone notifications showing wrong time (e.g., "17m" instead of "17h 47m") by converting remaining_time from minutes to seconds (Issue #157)
- **File Manager Folder Navigation** - Improved handling of long folder names (Issue #160):
  - Resizable sidebar: Drag the edge to adjust width (200-500px), double-click to reset
  - Text wrap toggle: "Wrap" button in header to wrap long names instead of truncating
  - Both settings persist in localStorage
  - Tooltip shows full name on hover
- **K-Profiles Backup Status** - Fixed GitHub backup settings showing incorrect printer connection count (e.g., "1/2 connected" when both printers are connected); now fetches status from API instead of relying on WebSocket cache
- **GitHub Backup Timestamps** - Removed volatile timestamps from GitHub backup files so git diffs only show actual data changes
- **Model-Based Queue AMS Mapping** - Fixed "Any [Model]" queue jobs failing at filament loading on H2D Pro and other printers (Issue #192):
  - Scheduler now computes AMS mapping after printer assignment for model-based jobs
  - Previously, no AMS mapping was sent because the specific printer wasn't known at queue time
  - Auto-matches required filaments to available AMS slots by type and color

### Maintenance
- Upgraded vitest from 2.x to 3.x to resolve npm audit security vulnerabilities in dev dependencies

## [0.1.6b11] - 2026-01-22

### New Features
- **Camera Zoom & Fullscreen** - Enhanced camera viewer controls:
  - Fullscreen mode for embedded camera viewer (new button in header)
  - Zoom controls (100%-400%) for both embedded and window modes
  - Pan support when zoomed in (click and drag)
  - Mouse wheel zoom support
  - Zoom resets on mode switch, refresh, or fullscreen toggle
- **Searchable HA Entity Selection** - Improved Home Assistant smart plug configuration:
  - Entity dropdown replaced with searchable combobox
  - Type to search across all HA entities (not just switch/light/input_boolean)
  - Energy sensor dropdowns (Power, Energy Today, Total) are now searchable
  - Find sensors with non-standard naming that don't match the switch entity name
- **Home Assistant Energy Sensor Support** - HA smart plugs can now use separate sensor entities for energy monitoring:
  - Configure dedicated power sensor (W), today's energy (kWh), and total energy (kWh) sensors
  - Supports plugs where energy data is exposed as separate sensor entities (common with Tapo, IKEA Zigbee2mqtt, etc.)
  - Energy sensors are selectable from all available HA sensors with power/energy units
  - Falls back to switch entity attributes if no sensors configured
  - Print energy tracking now works correctly for HA plugs (not just Tasmota)
  - New API endpoint: `GET /api/v1/smart-plugs/ha/sensors` to list available energy sensors
- **Finish Photo in Notifications** - Camera snapshot URL available in notification templates (Issue #126):
  - New `{finish_photo_url}` template variable for print_complete, print_failed, print_stopped events
  - Photo is captured before notification is sent (ensures image is available)
  - New "External URL" setting in Settings → Network (auto-detects from browser)
  - Full URL constructed for external notification services (Telegram, Email, Discord, etc.)
- **ZIP File Support in File Manager** - Upload and extract ZIP files directly in the library (Issue #121):
  - Drop or select ZIP files to automatically extract contents
  - Option to preserve folder structure from ZIP or extract flat
  - Extracts thumbnails and metadata from 3MF/gcode files inside ZIP
  - Progress indicator shows number of files extracted

### Fixed
- **Print time stats using slicer estimates** - Quick Stats "Print Time" now uses actual elapsed time (`completed_at - started_at`) instead of slicer estimates; cancelled prints only count time actually printed (Issue #137)
- **Skip objects modal overflow** - Modal now has max height (85vh) with scrollable object list when printing many items on the bed (Issue #134)
- **Filament cost using wrong default** - Statistics now correctly uses the "Default filament cost (per kg)" setting instead of hardcoded €25 value (Issue #120)
- **Spoolman tag field not auto-created** - The required "tag" extra field is now automatically created in Spoolman on first connect, fixing sync failures for fresh Spoolman installs (Issue #123)
- **P2S/X1E/H2 completion photo not captured** - Internal model codes (N7, C13, O1D, etc.) from MQTT/SSDP are now recognized for RTSP camera support (Issue #127)
- **Mattermost/Slack webhook 400 error** - Added "Slack / Mattermost" payload format option that sends `{"text": "..."}` instead of custom fields (Issue #133)
- **Subnet scan serial number** - Fixed A1 Mini subnet discovery showing "unknown-*" placeholder; serial field is now cleared so users know to enter it manually (Issue #140)

## [0.1.6b10] - 2026-01-21

### New Features
- **Unified Print Modal** - Consolidated three separate modals into one unified component:
  - Single modal handles reprint, add-to-queue, and edit-queue-item operations
  - Consistent UI/UX across all print operations
  - Reduced code duplication (~1300 LOC removed)
- **Multi-Printer Selection** - Send prints or queue items to multiple printers at once:
  - Checkbox selection for multiple printers in reprint and add-to-queue modes
  - "Select all" / "Clear" buttons for quick selection
  - Progress indicator during multi-printer submission
  - Ideal for print farms with identical filament configurations
- **Per-Printer AMS Mapping** - Configure filament slot mapping individually for each printer:
  - Enable "Custom mapping" checkbox under each selected printer
  - Auto-configure uses RFID data to match filaments automatically
  - Manual override for specific slot assignments
  - Match status indicator shows exact/partial/missing matches
  - Re-read button to refresh printer's loaded filaments
  - New setting in Settings → Filament to expand custom mapping by default
- **Enhanced Add-to-Queue** - Now includes plate selection and print options:
  - Configure all print settings upfront instead of editing afterward
  - Filament mapping with manual override capability
- **Print from File Manager** - Full print configuration when printing from library files:
  - Plate selection for multi-plate 3MF files with thumbnails
  - Filament slot mapping with comparison to loaded filaments
  - All print options (bed levelling, flow calibration, etc.)
- **File Manager Print Button** - Print directly from multi-selection toolbar:
  - "Print" button appears when exactly one sliced file is selected
  - Opens full PrintModal with plate selection and print options
  - "Add to Queue" button now uses Clock icon for clarity
- **Multiple Embedded Camera Viewers** - Open camera streams for multiple printers simultaneously in embedded mode:
  - Each viewer has its own remembered position and size
  - New viewers are automatically offset to prevent stacking
  - Printer-specific persistence in localStorage
  - **Navigation persistence** - Open cameras stay open when navigating away and back to Printers page
- **Application Log Viewer** - View and filter application logs in real-time from System Information page:
  - Start/Stop live streaming with 2-second auto-refresh
  - Filter by log level (DEBUG, INFO, WARNING, ERROR)
  - Text search across messages and logger names
  - Clear logs with one click
  - Expandable multi-line log entries (stack traces, etc.)
  - Auto-scroll to follow new entries
- **Deferred archive creation** - Queue items from File Manager no longer create archives upfront:
  - Queue items store `library_file_id` directly
  - Archives are created automatically when prints start
  - Reduces clutter in Archives from unprinted queued files
  - Queue displays library file name, thumbnail, and print time
- **Expandable Color Picker** - Configure AMS Slot modal now has an expandable color palette:
  - 8 basic colors shown by default (White, Black, Red, Blue, Green, Yellow, Orange, Gray)
  - Click "+" to expand 24 additional colors (Cyan, Magenta, Purple, Pink, Brown, Beige, Navy, Teal, Lime, Gold, Silver, Maroon, Olive, Coral, Salmon, Turquoise, Violet, Indigo, Chocolate, Tan, Slate, Charcoal, Ivory, Cream)
  - Click "-" to collapse back to basic colors
- **File Manager Sorting** - Printer file manager now has sorting options:
  - Sort by name (A-Z or Z-A)
  - Sort by size (smallest or largest first)
  - Sort by date (oldest or newest first)
  - Directories always sorted first
- **Camera View Mode Setting** - Choose how camera streams open:
  - "New Window" (default): Opens camera in a separate browser window
  - "Embedded": Shows camera as a floating overlay on the main screen
  - Embedded viewer is draggable and resizable with persistent position/size
  - Configure in Settings → General → Camera section
- **File Manager Rename** - Rename files and folders directly in File Manager:
  - Right-click context menu "Rename" option for files and folders
  - Inline rename button in list view
  - Validates filenames (no path separators allowed)
- **File Manager Mobile Accessibility** - Improved touch device support:
  - Three-dot menu button always visible on mobile (hover-only on desktop)
  - Selection checkbox always visible on mobile devices
  - Better PWA experience for file management
- **Optional Authentication** - Secure your Bambuddy instance with user authentication:
  - Enable/disable authentication via Setup page or Settings → Users
  - Role-based access control: Admin and User roles
  - Admins have full access; Users can manage prints but not settings
  - JWT-based authentication with 7-day token expiration
  - User management page for creating, editing, and deleting users
  - Backward compatible: existing installations work without authentication
  - Settings page restricted to admin users when auth is enabled

### Changed
- **Edit Queue Item modal** - Single printer selection only (reassigns item, doesn't duplicate)
- **Edit Queue Item button** - Changed from "Print to X Printers" to "Save"

### Fixed
- **File Manager folder navigation** - Fixed bug where opening a folder would briefly show files then jump back to root:
  - Removed `selectedFolderId` from useEffect dependency array that was causing a reset loop
  - Folder navigation now works correctly without resetting
- **Queue items with library files** - Fixed 500 errors when listing/updating queue items from File Manager
- **User preset AMS configuration** - Fixed user presets (inheriting from Bambu presets) showing empty fields in Bambu Studio after configuration:
  - Now correctly derives `tray_info_idx` from the preset's `base_id` when `filament_id` is null
  - User presets that inherit from Bambu presets (e.g., "# Overture Matte PLA @BBL H2D") now work correctly
- **Faster AMS slot updates** - Frontend now updates immediately after configuring AMS slots:
  - Added WebSocket broadcast to AMS change callback for instant UI updates
  - Removed unnecessary delayed refetch that was causing slow updates

## [0.1.6b9] - 2026-01-19

### New Features
- **Add to Queue from File Manager** - Queue sliced files directly from File Manager:
  - New "Add to Queue" toolbar button appears when sliced files are selected
  - Context menu and list view button options for individual files
  - Supports multiple file selection for batch queueing
  - Only accepts sliced files (.gcode or .gcode.3mf)
  - Creates archive and queue item in one action
- **Print Queue plate selection and options** - Full print configuration in queue edit modal:
  - Plate selection grid with thumbnails for multi-plate 3MF files
  - Print options section (bed levelling, flow calibration, vibration calibration, layer inspect, timelapse, use AMS)
  - Options saved with queue item and used when print starts
- **Multi-plate 3MF plate selection** - When reprinting multi-plate 3MF files (exported with "All sliced file"), users can now select which plate to print:
  - Plate selection grid with thumbnails, names, and print times
  - Filament requirements filtered to show only selected plate's filaments
  - Prevents incorrect filament mapping across plates
  - Closes [#93](https://github.com/maziggy/bambuddy/issues/93)
- **Home Assistant smart plug integration** - Control any Home Assistant switch/light entity as a smart plug:
  - Configure HA connection (URL + Long-Lived Access Token) in Settings → Network
  - Add HA-controlled plugs via Settings → Plugs → Add Smart Plug → Home Assistant tab
  - Entity dropdown shows all available switch/light/input_boolean entities
  - Full automation support: auto-on, auto-off, scheduling, power alerts
  - Works alongside existing Tasmota plugs
  - Closes [#91](https://github.com/maziggy/bambuddy/issues/91)
- **Fusion 360 design file attachments** - Attach F3D files to archives for complete design tracking:
  - Upload F3D files via archive context menu ("Upload F3D" / "Replace F3D")
  - Cyan badge on archive card indicates attached F3D file (next to source 3MF badge)
  - Click badge to download, or use "Download F3D" in context menu
  - F3D files included in backup/restore
  - API tests for F3D endpoints

### Fixed
- **Multi-plate 3MF metadata extraction** - Single-plate exports from multi-plate projects now show correct thumbnail and name:
  - Extracts plate index from slice_info.config metadata
  - Uses correct plate thumbnail (e.g., plate_5.png instead of plate_1.png)
  - Appends "Plate N" to print name for plates > 1
  - Closes [#92](https://github.com/maziggy/bambuddy/issues/92)

## [0.1.6b8] - 2026-01-17

### Added
- **MQTT Publishing** - Publish BamBuddy events to external MQTT brokers for integration with Home Assistant, Node-RED, and other automation platforms:
  - New "Network" tab in Settings for MQTT configuration
  - Configure broker, port, credentials, TLS, and topic prefix
  - Real-time connection status indicator
  - Topics: printer status, print lifecycle, AMS changes, queue events, maintenance alerts, smart plug states, archive events
- **Virtual Printer Queue Mode** - New mode that archives files and adds them directly to the print queue:
  - Three modes: Archive (immediate), Review (pending list), Queue (print queue)
  - Queue mode creates unassigned items that can be assigned to a printer later
- **Unassigned Queue Items** - Print queue now supports items without an assigned printer:
  - "Unassigned" filter option on Queue page
  - Unassigned items highlighted in orange
  - Assign printer via edit modal
- **Sidebar Badge Indicators** - Visual indicators on sidebar icons:
  - Queue icon: yellow badge with pending item count
  - Archive icon: blue badge with pending uploads count
  - Auto-updates every 5 seconds and on window focus
- **Project Parts Tracking** - Track individual parts/objects separately from print plates:
  - "Target Parts" field alongside "Target Plates"
  - Separate progress bars for plates vs parts
  - Parts count auto-detected from 3MF files

### Fixed
- Chamber temp on A1/P1S - Fixed regression where chamber temperature appeared on printers without sensors in multi-printer setups
- Queue prints on A1 - Fixed "MicroSD Card read/write exception error" when starting prints from queue
- Spoolman sync - Fixed Bambu Lab spool detection and AMS tray data persistence
- FTP downloads - Fixed downloads failing for .3mf files without .gcode extension
- Project statistics - Fixed inconsistent display between project list and detail views
- Chamber light state - Fixed WebSocket broadcasts not including light state changes
- Backup/restore - Improved handling of nullable fields and AMS mapping data

## [0.1.6b7] - 2026-01-12

### Added
- **AMS Color Mapping** - Manual AMS slot selection in ReprintModal, AddToQueueModal, EditQueueItemModal:
  - Dropdown to override auto-matched AMS slots with any loaded filament
  - Blue ring indicator distinguishes manual selections from auto-matches
  - Status indicators: green (match), yellow (type only), orange (not found)
  - Shared color utility with ~200 Bambu color mappings
  - Fixed AMS mapping format to match Bambu Studio exactly
- **Print Options in Reprint Modal** - Bed leveling, flow calibration, vibration calibration, first layer inspection, timelapse toggles
- **Time Format Setting** - New date utilities applied to 12 components, fixes archive times showing in UTC
- **Statistics Dashboard Improvements** - Size-aware rendering for PrintCalendar, SuccessRateWidget, TimeAccuracyWidget, FilamentTypesWidget, FailureAnalysisWidget
- **Firmware Update Helper** - Check firmware versions against Bambu Lab servers for LAN-only printers with one-click upload
- **FTP Reliability** - Configurable retry (1-10 attempts, 1-30s delay), A1/A1 Mini SSL fix, configurable timeout
- **Bulk Project Assignment** - Assign multiple archives to a project at once from multi-select toolbar
- **Chamber Light Control** - Light toggle button on printer cards
- **Support Bundle Feature** - Debug logging toggle with ZIP generation for issue reporting
- **Archive Improvements** - List view with full parity, object count display, cross-view highlighting, context menu button
- **Maintenance Improvements** - wiki_url field for documentation links, model-specific Bambu Lab wiki URLs
- **Spoolman Integration** - Clear location when spools removed from AMS during sync

### Fixed
- Browser freeze from CameraPage WebSocket
- Project card filament badges showing duplicates and raw color codes
- Print object label positioning in skip objects modal
- Printer hour counter not updated on backend restart
- Virtual printer excluded from discovery
- Print cover fetch in Docker environments
- Archive delete safety checks prevent deleting parent dirs

## [0.1.6b6] - 2026-01-04

### Added
- **Resizable Printer Cards** - Four sizes (S/M/L/XL) with +/- buttons in toolbar
- **Queue Only Mode** - Stage prints without auto-start, release when ready with purple "Staged" badge
- **Virtual Printer Model Selection** - Choose which Bambu printer model to emulate
- **Tasmota Admin Link** - Quick access to smart plug web interface with auto-login
- **Pending Upload Delete Confirmation** - Confirmation modal when discarding pending uploads

### Fixed
- Camera stream reconnection with automatic recovery from stalled streams
- Active AMS slot display for H2D printers with multiple AMS units
- Spoolman sync matching only Bambu Lab vendor filaments
- Skip objects modal object ID markers positioning
- Virtual printer model codes, serial prefixes, startup model, certificate persistence
- Archive card context menu positioning

## [0.1.6b5] - 2026-01-02

### Added
- **Pre-built Docker Images** - Pull directly from GitHub Container Registry (ghcr.io)
- **Printer Controls** - Stop and Pause/Resume buttons on printer cards with confirmation modals
- **Skip Objects** - Skip individual objects during print without canceling entire job
- **Spoolman Improvements** - Link Spool, UUID Display, Sync Feedback
- **AMS Slot RFID Re-read** - Re-read filament info via hover menu
- **Print Quantity Tracking** - Track items per print for project progress

### Fixed
- Spoolman 400 Bad Request when creating spools
- Update module for Docker based installations

## [0.1.6b4] - 2026-01-01

### Changed
- Refactored AMS section for better visual grouping and spacing

### Fixed
- Printer hour counter not incrementing during prints
- Slicer protocol OS detection (Windows: bambustudio://, macOS/Linux: bambustudioopen://)
- Camera popup window auto-resize and position persistence
- Maintenance page duration display with better precision
- Docker update detection for in-app updates

## [0.1.6b3] - 2025-12-31

### Added
- Confirmation modal for quick power switch in sidebar

### Fixed
- Printer hour counter inconsistency between card and maintenance page
- Improved printer hour tracking accuracy with real-time runtime counter
- Add Smart Plug modal scrolling on lower resolution screens
- Excluded virtual printer from discovery results
- Bottom sidebar layout

## [0.1.6b2] - 2025-12-29

### Added
- **Virtual Printer** - Emulates a Bambu Lab printer on your network:
  - Auto-discovery via SSDP protocol
  - Send prints directly from Bambu Studio/Orca Slicer
  - Queue mode or Auto-start mode
  - TLS 1.3 encrypted MQTT + FTPS with auto-generated certificates
- Persistent archive page filters

### Fixed
- AMS filament matching in reprint modal
- Archive card cache bug with wrong cover image
- Queueing module re-queue modal

## [0.1.6b] - 2025-12-28

### Added
- **Smart Plugs** - Tasmota device discovery and Switchbar quick access widget
- **Timelapse Editor** - Trim, speed adjustment (0.25x-4x), and music overlay
- **Printer Discovery** - Docker subnet scanning, printer model mapping, detailed status stages
- **Archives & Projects** - AMS filament preview, file type badges, project filament colors, BOM filter
- **Maintenance** - Custom maintenance types with manual per-printer assignment
- Delete printer options to keep or delete archives

### Fixed
- Notifications sent when printer offline
- Camera stream stopping with auto-reconnection
- A1/P1 camera streaming with extended timeouts
- Attachment uploads not persisting
- Total print hours calculation

## [0.1.5] - 2025-12-19

### Added
- **Docker Support** - One-command deployment with docker compose
- **Mobile PWA** - Full mobile support with responsive navigation and touch gestures
- **Projects** - Group related prints with progress tracking
- **Archive Comparison** - Compare 2-5 archives side-by-side
- **Smart Plug Automation** - Tasmota integration with auto power-on/off
- **Telemetry Dashboard** - Anonymous usage statistics (opt-out available)
- **Full-Text Search** - Efficient search across print names, filenames, tags, notes, designer, filament type
- **Failure Analysis** - Dashboard widget showing failure rate with correlations and trends
- **CSV/Excel Export** - Export archives and statistics with current filters
- **AMS Humidity/Temperature History** - Clickable indicators with charts and statistics
- **Daily Digest Notifications** - Consolidated daily summary
- **Notification Template System** - Customizable message templates
- **Webhooks & API Keys** - API key authentication with granular permissions
- **System Info Page** - Database and resource statistics
- **Comprehensive Backup/Restore** - Including user options and external links

### Changed
- Redesigned AMS section with BambuStudio-style device icons
- Tabbed design and auto-save for settings page
- Improved archive card context menu with submenu support
- WebSocket throttle reduced to 100ms for smoother updates

### Fixed
- Browser freeze on print completion when camera stream was open
- Printer status "timelapse" effect after print completion
- Complete rewrite of timelapse auto-download with retry mechanism
- Reprint from archive sending slicer source file instead of sliced gcode
- Import shadowing bugs causing "cannot access local variable" error
- Archive PATCH 500 error
- ffmpeg processes not killed when closing webcam window

### Removed
- Control page
- PWA push notifications (replaced with standard notification providers)