 maziggy
|
dad7fea37b
fix(notifications): the daily digest goes out during quiet hours and a failed one keeps its events for the next (dropped after two days); a deleted queued archive no longer leaves its creator to be named on a later print; a print closed at reconnect reports no actual duration; the template editor knows the print outcome confirmation and names every event
|
il y a 2 jours |
|
maziggy
|
ab5ccc1082
fix(printers): a Stop on an idle printer no longer marks it as user-stopped, so a later failed print is not reported as cancelled; Configure Slot warns when a manual K value could not be sent; Skip Objects and the connection diagnostic release their DB connection before talking to the printer
|
il y a 2 jours |
|
maziggy
|
cf0ba31f19
fix(camera): the plate check holds the chamber light like other camera uses, so a live view opened meanwhile keeps it; captures use the live frame of a watched single-client external camera; a reconnecting X1C live view is not ended by the cleanup; camera test/diagnose/plate routes release their DB connection before capturing
|
il y a 2 jours |
|
maziggy
|
07d99f3383
fix(queue): GET /queue?status= takes several comma-separated statuses, as documented; remove the archive rescan and project attachment routes that had no UI (cover images keep their storage)
|
il y a 2 jours |
|
maziggy
|
51610b9f19
fix(ui): one toast and one close when saving an edited queue item; a failed Unassign on the printer card shows its error; the OBS overlay applies live status updates; bulk upload shows each same-named file its own result; queue timeline and history rows show the queued plate's thumbnail; remove the Inventory "Full" column that nothing fills
|
il y a 2 jours |
|
maziggy
|
5649f836da
fix(spoolman): the print dialog's cost estimate and each slot's grams left come from the spool bound to the slot, priced the way the print is charged, instead of the built-in assignments; they refresh when a slot's assignment changes
|
il y a 2 jours |
|
maziggy
|
005b34af6d
deleted. Nothing would have been charged twice, but that printer would have looked mid-print to later spool archiving. It's closed using the "completion in progress"
|
il y a 2 jours |
|
maziggy
|
2e30470dfb
fix(spoolman): Cost/kg in the inventory and on the SpoolBuddy spool card shows the rate prints are charged, falling back to the filament price when the spool has none (or 0)
|
il y a 3 jours |
|
maziggy
|
fcc20cb62c
fix(spoolman): AMS syncs write only the slots whose spool they changed and keep a spool assigned meanwhile; the Sync buttons announce slot changes and update the slot preset; a new Spoolman spool is not seeded from leftover built-in assignments
|
il y a 3 jours |
|
maziggy
|
c2bc41a5ef
fix(spoolman): a location delete is refused while Spoolman can't be read; labels print for archived spools; archived spools are not assigned or linked to slots; slot requests outside the AMS ranges are refused before Spoolman is written; bulk counter resets report the spools that failed
|
il y a 3 jours |
|
maziggy
|
19bd258672
fix(backup): a Git backup includes each spool's "Total Consumed" reset point and a restore brings it back (an older backup keeps the live one)
|
il y a 3 jours |
|
maziggy
|
5afb485c12
fix(inventory): a finished print is not charged a second time by an AMS update while its usage is booked; a completion reported without any file name closes the print session instead of keeping the AMS weight sync off until the next print
|
il y a 3 jours |
|
maziggy
|
5b34997dfa
fix(inventory): hand assign, unassign and add-from-slot wait for the printer's slot lock; the AMS remain sync and a print's usage no longer overwrite a weight set by hand or weighed meanwhile; a spool deleted while a print is charged is skipped
|
il y a 3 jours |
|
maziggy
|
5edbe7586d
fix(inventory): deleting a spool frees and announces its slots; scale, AMS and manual weight syncs and a finished print's usage refresh other tabs and the printer cards; a deleted printer's spool assignments go with it on SQLite; a pre-assigned slot the printer could not be told about is retried; CSV last_used is stored in UTC
|
il y a 3 jours |
|
maziggy
|
a6a4b7648c
fix(queue): an override counts an equivalent filament type in its colour; preheat and keep-warm heat the bed for the plate the job prints; queue colour names and the colour name saved with an override follow the filament's product line
|
il y a 3 jours |
|
maziggy
|
2b5cd87c7f
fix(queue): pipeline cancel stops the preheat and frees the budget; an offline stop frees the budget; the SD cleanup at a print's end is bounded to 45 s; a refused print start is logged and retried at once without a reconnect
|
il y a 3 jours |
|
maziggy
|
918aa26ffa
fix(queue): models matched without regard to case when adding jobs and in pipelines, stored in the printers' spelling; webhook reprints reuse the slicer's AMS slots; a multi-plate file queued without a plate stores the plate that prints
|
il y a 3 jours |
|
maziggy
|
abc971a718
fix(queue): a job edited during a scheduler round waits for the next one instead of being dispatched or mapped from the stale copy; the claim requires the selected printer; bulk edit rechecks the claim; no transaction held through a power-on wait
|
il y a 3 jours |
|
maziggy
|
3b7c287f68
fix(queue): a print is charged with its own plate and AMS mapping (a fresh dispatch replaces a never-started one's, a failed send leaves a running plate's, completion drains the mapping)
|
il y a 3 jours |
|
maziggy
|
b342124f0e
fix(timelapse): a video goes to the run it belongs to (scan stops on a newer run, claimed videos left out of matching, camera video replaces the printer's without orphaning it); every timelapse change refreshes open Archives pages
|
il y a 3 jours |
|
maziggy
|
461c3f045d
fix(archives): a cost set through the API or by Recalculate reaches the run that had it; edits during a reprint leave the previous run alone; archive cost bounded; a 422 survives Infinity/NaN
|
il y a 3 jours |
|
maziggy
|
879acdbf1f
fix(archives): archives made without their 3MF store #RRGGBB colours (existing ones repaired at startup), find AMS-HT filament and are priced from their spools once the 3MF arrives; nozzle temperature of the printed plate
|
il y a 3 jours |
|
maziggy
|
bb0bf03f68
fix(archives): an offline stop is logged and its real end replaces it; one log entry per run; untracked completions and print start find the print's own archive and 3MF
|
il y a 3 jours |
|
maziggy
|
44a5c7a7f5
test(queue,billing,vp): pin dispatch failures, creator scope and busy-printer holds, aborted-print usage fallbacks, end-to-end print completion and billing, VP MQTT pre-login and rate-limit guards; test schema loads every model
|
il y a 3 jours |
|
maziggy
|
69c2ff1b44
test(auth): pin disabled keys, ended sessions on every gate, own-only key owners, long-lived token scope, model targets of limited keys; stricter route-auth backstop
|
il y a 3 jours |
|
maziggy
|
3ffa88afae
test: Docker backend tests get the frontend sources, scripts/, pkill and an init process
|
il y a 4 jours |
|
maziggy
|
fa5f300a4d
test: test scripts run the build, type check and lint exits; finish query cancellations and release the app engine per test; refresh the type-check baseline
|
il y a 4 jours |
|
maziggy
|
ab7fb583da
test: test scripts run the build, type check and lint exits; app engine released per test; refresh the type-check baseline
|
il y a 4 jours |
|
maziggy
|
c9c13b6440
fix(archives): the A1/A1 Mini/P1/A2L built-in calibration is not archived as a print
|
il y a 4 jours |
|
maziggy
|
e05a917445
fix(notifications,drying): printer-limited channels get only their printer's events; blocking mode pre-dries for scheduled jobs; model jobs say "(drying)"; remove dead load-tray state
|
il y a 4 jours |
