 MartinNYHC
|
4316ede3af
Merge pull request #3350 from maziggy/dev2
|
1 день назад |
 maziggy
|
833a096da6
test/chore: Bandit findings on PR #3350 marked with reasons (ftplib in tests, migration SQL built from module constants), a misplaced nosec moved to its SQL line; layer timelapse tests use tmp_path instead of a shared /tmp/test_bambuddy
|
1 день назад |
|
maziggy
|
76ed16509f
chore(deps): pillow 13.0.0 and certifi 2026.10.19, multidict floor 6.9.1 (pip-audit findings); locks regenerated for these packages only
|
1 день назад |
|
maziggy
|
3043dae4fc
chore(deps): vite 8.1.6 and source-map-js 1.2.2 (npm audit: launch-editor and source-map advisories in dev tooling)
|
1 день назад |
|
maziggy
|
e290a57c84
test: vitest shows console output only for failing tests (silent: 'passed-only' in vitest.config.ts, so Docker runs are quiet too); test_frontend.sh back to npm run test:run
|
1 день назад |
|
maziggy
|
9083cd2a35
test: Docker test runs use 30 workers (-n auto counted physical cores only); tests stop the background tasks they started and close the app engine's connections after every test on SQLite too ("Event loop is closed" thread warning)
|
1 день назад |
|
maziggy
|
198610476f
test: Docker test runs use all logical CPUs (-n logical; auto counted physical cores only); tests stop the background tasks they started and close the app engine's connections after every test on SQLite too ("Event loop is closed" thread warning)
|
1 день назад |
|
maziggy
|
92c307786a
test: test_frontend.sh hides console output of passing tests (vitest --silent=passed-only)
|
1 день назад |
|
maziggy
|
2443cea174
feat: USB cameras are picked from a list of detected devices (refresh, not-found marking, manual fallback, Docker hint; device listing off the event loop, /dev/video0-99 only); fix: timelapse editor saves as a background job with progress and cancel (ffmpeg stopped on cancel, no overwrite of a timelapse removed or replaced meanwhile, ffprobe/thumbnail timeouts), and the music volume is applied
|
1 день назад |
|
maziggy
|
460c11ca30
chore: remove dead code (audit step 4): unused backend helpers and schema classes, 51 unused API client wrappers, test-only components (BackupModal, RestoreModal, VirtualPrinterSettings, TagDetectedModal, WeightDisplay, useLongPress) and their translations; removed POST /printers/test, the two printer debug routes and the SpoolBuddy update-status channel; legacy virtual printer settings fields removed from the settings API; first-run setup redirect tested
|
1 день назад |
|
maziggy
|
770c6bfdf9
fix: firmware upload only for idle printers (dialog, server, re-check after download, queue waits during upload); AMS Reset Slot asks first and is refused while printing; confirms for shopping list Clear all, Git history Clear and SSO unlink (last SSO link of an account without password stays); LDAP/SMTP test use the form's values; emptying a user's email removes it; local backup delete errors are shown; removed the unreachable printer-card Spoolman link/unlink
|
1 день назад |
|
maziggy
|
57ed8253ea
Security hardening (maziggy/bambuddy-security #N)
|
1 день назад |
|
maziggy
|
847baa347d
test(frontend): wiring tests for the 37 high-risk gaps (printer card and bulk actions, settings and 2FA, inventory/Spoolman/SpoolBuddy, queue, archives, finance, K-profiles, smart plugs, maintenance); fix: the archive purge uses the previewed age, a transaction can be moved to no cost center, and deleting a printer refreshes its spool assignments
|
2 дней назад |
|
maziggy
|
6cdf4eb2d0
Tests: 21 in the new test_api_key_own_rows.py. Before the change, 8 of them failed; the rest pass either way because they check refusals and unchanged behaviour. All 7 mutations were killed. In the #3256 tests (test_api_key_queue_acts_as_owner.py), I tightened the bulk assertion and fixed the outdated docstring. The wiki's API keys page had documented the old refusal; that block is rewritten.
|
2 дней назад |
|
maziggy
|
c6598afec8
test: library/queue probe files get unique names, so parallel workers no longer delete each other's files ("File not found on disk" flake)
|
2 дней назад |
|
maziggy
|
bd692ac3c7
fix(stats): date filters use calendar days in the browser's time zone instead of UTC days; the Statistics page sends its zone, and the date-filtered archive, statistics and inventory-statistics endpoints take an optional tz (Bambuddy's own TZ when omitted)
|
2 дней назад |
|
maziggy
|
ac4806f029
fix: a failed first run no longer leaves the archive at its partial cost (built-in inventory); completion stops the start cost estimate before writing the real cost; 2FA/SSO logins report LDAP/OIDC users' auth source; a fault in both print_error and HMS is listed once; a refused H2D load's tray target expires; refused K-profile re-applies are logged; the cloud filament-name map is fetched once per account without holding a DB connection; the library edit route refuses folder changes across the external boundary; a slow slice-progress answer is not reported as an unreachable sidecar
|
2 дней назад |
|
maziggy
|
808e461c52
fix(printers): live updates carry the airduct (cooling/heating) mode, also when it is the only change on an idle printer, and each H2C rack slot's filament type; the recovered-3MF Spoolman tests no longer depend on plate ids another test left behind
|
2 дней назад |
|
maziggy
|
5cda4c6913
fix(backup): a Git restore brings back a print that was running at backup time as cancelled ("No status update received") instead of a print that failed on the next reconnect, and an archive this instance still has keeps its own status on overwrite; each spool's last-used time is backed up and restored
|
2 дней назад |
|
maziggy
|
27003de368
fix(ftp): a slow folder listing is reported as slow instead of "printer unavailable", and a refresh joins the listing still running instead of starting another; printer file times without a year are dated against UTC, so evening files on hosts behind UTC are not dated a year back
|
2 дней назад |
|
maziggy
|
ba93abdb9d
fix(spoolbuddy): writing a sticker no longer replaces a Bambu spool's AMS link in Spoolman (refused with the reason on Spoolman before 0.27, and such spools are not listed as untagged); the colour-name warning only appears when the name is really missing; an update stops when installing dependencies times out instead of restarting the daemon and reporting success
|
2 дней назад |
|
maziggy
|
b9b62f739f
fix(virtual-printer): a late slicer update leaves a queue job the scheduler already claimed alone (its archive still keeps the slicer's AMS pick); a backup restore really stops the virtual printers; the legacy PUT /settings/virtual-printer refuses the settings it no longer applies and is no longer blocked by stale legacy values
|
2 дней назад |
|
maziggy
|
a10d5430de
fix(settings): remove the "Save thumbnails" and "Notification Language" controls, which nothing read (the API keeps both fields); a SQLite-to-PostgreSQL restore fills empty required timestamps in UTC instead of the host's local time
|
2 дней назад |
|
maziggy
|
175758d25a
fix(maintenance): a printer's time offline is not counted as print time; duplicate maintenance items are merged on upgrade and prevented by a unique index; the "performed" response honours the item's own interval type
|
2 дней назад |
|
maziggy
|
dad7fea37b
fix(notifications): the daily digest goes out during quiet hours and a failed one keeps its events for the next (dropped after two days); a deleted queued archive no longer leaves its creator to be named on a later print; a print closed at reconnect reports no actual duration; the template editor knows the print outcome confirmation and names every event
|
2 дней назад |
|
maziggy
|
ab5ccc1082
fix(printers): a Stop on an idle printer no longer marks it as user-stopped, so a later failed print is not reported as cancelled; Configure Slot warns when a manual K value could not be sent; Skip Objects and the connection diagnostic release their DB connection before talking to the printer
|
2 дней назад |
|
maziggy
|
cf0ba31f19
fix(camera): the plate check holds the chamber light like other camera uses, so a live view opened meanwhile keeps it; captures use the live frame of a watched single-client external camera; a reconnecting X1C live view is not ended by the cleanup; camera test/diagnose/plate routes release their DB connection before capturing
|
2 дней назад |
|
maziggy
|
07d99f3383
fix(queue): GET /queue?status= takes several comma-separated statuses, as documented; remove the archive rescan and project attachment routes that had no UI (cover images keep their storage)
|
2 дней назад |
|
maziggy
|
51610b9f19
fix(ui): one toast and one close when saving an edited queue item; a failed Unassign on the printer card shows its error; the OBS overlay applies live status updates; bulk upload shows each same-named file its own result; queue timeline and history rows show the queued plate's thumbnail; remove the Inventory "Full" column that nothing fills
|
2 дней назад |
|
maziggy
|
5649f836da
fix(spoolman): the print dialog's cost estimate and each slot's grams left come from the spool bound to the slot, priced the way the print is charged, instead of the built-in assignments; they refresh when a slot's assignment changes
|
2 дней назад |
