 maziggy
|
005b34af6d
deleted. Nothing would have been charged twice, but that printer would have looked mid-print to later spool archiving. It's closed using the "completion in progress"
|
2 днів тому |
|
maziggy
|
2e30470dfb
fix(spoolman): Cost/kg in the inventory and on the SpoolBuddy spool card shows the rate prints are charged, falling back to the filament price when the spool has none (or 0)
|
3 днів тому |
|
maziggy
|
fcc20cb62c
fix(spoolman): AMS syncs write only the slots whose spool they changed and keep a spool assigned meanwhile; the Sync buttons announce slot changes and update the slot preset; a new Spoolman spool is not seeded from leftover built-in assignments
|
3 днів тому |
|
maziggy
|
c2bc41a5ef
fix(spoolman): a location delete is refused while Spoolman can't be read; labels print for archived spools; archived spools are not assigned or linked to slots; slot requests outside the AMS ranges are refused before Spoolman is written; bulk counter resets report the spools that failed
|
3 днів тому |
|
maziggy
|
19bd258672
fix(backup): a Git backup includes each spool's "Total Consumed" reset point and a restore brings it back (an older backup keeps the live one)
|
3 днів тому |
|
maziggy
|
5afb485c12
fix(inventory): a finished print is not charged a second time by an AMS update while its usage is booked; a completion reported without any file name closes the print session instead of keeping the AMS weight sync off until the next print
|
3 днів тому |
|
maziggy
|
5b34997dfa
fix(inventory): hand assign, unassign and add-from-slot wait for the printer's slot lock; the AMS remain sync and a print's usage no longer overwrite a weight set by hand or weighed meanwhile; a spool deleted while a print is charged is skipped
|
3 днів тому |
|
maziggy
|
5edbe7586d
fix(inventory): deleting a spool frees and announces its slots; scale, AMS and manual weight syncs and a finished print's usage refresh other tabs and the printer cards; a deleted printer's spool assignments go with it on SQLite; a pre-assigned slot the printer could not be told about is retried; CSV last_used is stored in UTC
|
3 днів тому |
|
maziggy
|
a6a4b7648c
fix(queue): an override counts an equivalent filament type in its colour; preheat and keep-warm heat the bed for the plate the job prints; queue colour names and the colour name saved with an override follow the filament's product line
|
3 днів тому |
|
maziggy
|
2b5cd87c7f
fix(queue): pipeline cancel stops the preheat and frees the budget; an offline stop frees the budget; the SD cleanup at a print's end is bounded to 45 s; a refused print start is logged and retried at once without a reconnect
|
3 днів тому |
|
maziggy
|
918aa26ffa
fix(queue): models matched without regard to case when adding jobs and in pipelines, stored in the printers' spelling; webhook reprints reuse the slicer's AMS slots; a multi-plate file queued without a plate stores the plate that prints
|
3 днів тому |
|
maziggy
|
abc971a718
fix(queue): a job edited during a scheduler round waits for the next one instead of being dispatched or mapped from the stale copy; the claim requires the selected printer; bulk edit rechecks the claim; no transaction held through a power-on wait
|
3 днів тому |
|
maziggy
|
3b7c287f68
fix(queue): a print is charged with its own plate and AMS mapping (a fresh dispatch replaces a never-started one's, a failed send leaves a running plate's, completion drains the mapping)
|
3 днів тому |
|
maziggy
|
b342124f0e
fix(timelapse): a video goes to the run it belongs to (scan stops on a newer run, claimed videos left out of matching, camera video replaces the printer's without orphaning it); every timelapse change refreshes open Archives pages
|
3 днів тому |
|
maziggy
|
461c3f045d
fix(archives): a cost set through the API or by Recalculate reaches the run that had it; edits during a reprint leave the previous run alone; archive cost bounded; a 422 survives Infinity/NaN
|
3 днів тому |
|
maziggy
|
879acdbf1f
fix(archives): archives made without their 3MF store #RRGGBB colours (existing ones repaired at startup), find AMS-HT filament and are priced from their spools once the 3MF arrives; nozzle temperature of the printed plate
|
3 днів тому |
|
maziggy
|
bb0bf03f68
fix(archives): an offline stop is logged and its real end replaces it; one log entry per run; untracked completions and print start find the print's own archive and 3MF
|
3 днів тому |
|
maziggy
|
c9c13b6440
fix(archives): the A1/A1 Mini/P1/A2L built-in calibration is not archived as a print
|
4 днів тому |
|
maziggy
|
e05a917445
fix(notifications,drying): printer-limited channels get only their printer's events; blocking mode pre-dries for scheduled jobs; model jobs say "(drying)"; remove dead load-tray state
|
4 днів тому |
|
maziggy
|
e3824097fa
fix(mqtt): an H2D's active slot is read against the same message's nozzle data, and older nozzle data no longer overrules it
|
4 днів тому |
|
maziggy
|
1de2d51634
fix(smart-plugs): Home Assistant scripts linked to a printer run when Bambuddy switches its power plug off or on by schedule, not only by hand
|
4 днів тому |
|
maziggy
|
ce9853c056
fix(printing): a plate check that could not run says so; the archive recovery download follows the file size; an unconfirmed upload is read back; broken MakerWorld downloads are refused; bulk-edit toast reflects the result; CallMeBot values are encoded
|
4 днів тому |
|
maziggy
|
26e9a05707
fix(queue): a plate printed from the external spool keeps the AMS off on multi-plate files; slot reuse respects the finish; any-model VPs keep the AMS on; cloud filament id read from the preset too
|
4 днів тому |
|
maziggy
|
f45cc599f3
fix(kprofiles): an AMS change leaves the K-profile to the lost-selection check; command answers no longer change the nozzle; unconfirmed writes say so and edits read back; skip refusals are logged; stop-drying toast says sent
|
4 днів тому |
|
maziggy
|
cacaaf4dae
fix(printers): live status carries nozzles, firmware, developer mode and the print's AMS mapping; run-out hint narrows by nozzle; AMS-HT is its unit id; rotate check sees loaded slots
|
4 днів тому |
|
maziggy
|
ac976e0003
fix(archives): kill-switch stops archive as cancelled; offline queue stop stores a reason key; SpoolBuddy config save offers a daemon restart
|
4 днів тому |
|
maziggy
|
3c2ab99635
fix(archives): re-sliced archives read as not printed with a cost; restore checks its numbers; prints are bound under one set of names
|
4 днів тому |
|
maziggy
|
f7bd06641a
fix(inventory): a used weight entered for a new spool is kept; Spoolman last_used means print use; the slot K picker accounts for nozzle flow
|
4 днів тому |
|
maziggy
|
346b58ed8f
fix(settings): printer temperature history retention gets a setting; no retention can wipe history; bug reports keep no email
|
4 днів тому |
|
maziggy
|
741539a740
chore(api): remove dead firmware WS progress, the delete-all plate calibration route and unused client wrappers
|
4 днів тому |
