Updated Spoolbuddy install script to strip down Raspbian

spoolbuddy/install/install.sh

@@ -54,6 +54,8 @@ API_KEY=""
 BAMBUDDY_PORT="8000"
 NON_INTERACTIVE="false"
 REBOOT_NEEDED="false"
+KIOSK_USER=""            # auto-detected from $SUDO_USER
+KIOSK_URL=""             # derived from $BAMBUDDY_URL/spoolbuddy
 
 # ─────────────────────────────────────────────────────────────────────────────
 # Helpers
@@ -562,6 +564,288 @@ EOF
     success "Bambuddy service created and enabled"
 }
 
+# ─────────────────────────────────────────────────────────────────────────────
+# System Strip-Down (dedicated appliance — remove unnecessary services/packages)
+# ─────────────────────────────────────────────────────────────────────────────
+
+strip_services() {
+    info "Disabling unnecessary services..."
+
+    local services=(
+        bluetooth.service
+        cloud-init-local.service
+        cloud-init.service
+        cloud-init-network.service
+        cloud-config.service
+        cloud-final.service
+        cloud-init-hotplugd.socket
+        avahi-daemon.service
+        avahi-daemon.socket
+        ModemManager.service
+        udisks2.service
+        apparmor.service
+        man-db.timer
+        e2scrub_all.timer
+        e2scrub_reap.service
+    )
+
+    local disabled=0
+    for svc in "${services[@]}"; do
+        if systemctl is-enabled "$svc" &>/dev/null; then
+            systemctl disable "$svc" 2>/dev/null || true
+            (( disabled++ ))
+        fi
+    done
+
+    if (( disabled > 0 )); then
+        success "Disabled $disabled unnecessary services"
+    else
+        success "No unnecessary services to disable"
+    fi
+}
+
+strip_packages() {
+    info "Removing unnecessary packages..."
+
+    local packages=(
+        mkvtoolnix
+        firmware-atheros
+        firmware-mediatek
+        cloud-init
+        rpi-cloud-init-mods
+        rpi-connect-lite
+        avahi-daemon
+        modemmanager
+        udisks2
+    )
+
+    local to_remove=()
+    for pkg in "${packages[@]}"; do
+        if dpkg -l "$pkg" &>/dev/null 2>&1; then
+            to_remove+=("$pkg")
+        fi
+    done
+
+    if (( ${#to_remove[@]} > 0 )); then
+        run_with_progress "Removing ${#to_remove[@]} packages" apt-get remove --purge -y "${to_remove[@]}"
+        run_with_progress "Cleaning up dependencies" apt-get autoremove --purge -y
+    else
+        success "No unnecessary packages to remove"
+    fi
+}
+
+# ─────────────────────────────────────────────────────────────────────────────
+# Kiosk Setup (labwc + Chromium + squeekboard + Plymouth splash)
+# ─────────────────────────────────────────────────────────────────────────────
+
+setup_kiosk() {
+    info "Setting up touchscreen kiosk..."
+
+    # Detect kiosk user (the human user who ran sudo)
+    KIOSK_USER="${SUDO_USER:-$(logname 2>/dev/null || echo pi)}"
+    KIOSK_URL="${BAMBUDDY_URL}/spoolbuddy"
+    local KIOSK_HOME
+    KIOSK_HOME=$(eval echo "~$KIOSK_USER")
+
+    info "Kiosk user: $KIOSK_USER (home: $KIOSK_HOME)"
+    info "Kiosk URL:  $KIOSK_URL"
+
+    # ── Install kiosk packages ────────────────────────────────────────────
+    run_with_progress "Installing kiosk packages" apt-get install -y labwc chromium squeekboard plymouth wlr-randr
+
+    # ── config.txt tweaks ─────────────────────────────────────────────────
+    local boot_config="/boot/firmware/config.txt"
+    if [[ ! -f "$boot_config" ]]; then
+        boot_config="/boot/config.txt"
+    fi
+
+    if [[ -f "$boot_config" ]]; then
+        info "Configuring $boot_config for kiosk..."
+
+        # Disable audio (change existing on→off)
+        sed -i 's/^dtparam=audio=on/dtparam=audio=off/' "$boot_config"
+
+        # Disable camera auto-detect (change existing 1→0)
+        sed -i 's/^camera_auto_detect=1/camera_auto_detect=0/' "$boot_config"
+
+        # Append if missing: gpu_mem=32
+        if ! grep -q "^gpu_mem=" "$boot_config"; then
+            echo "" >> "$boot_config"
+            echo "# Kiosk: Minimal GPU firmware memory (KMS uses CMA from system RAM)" >> "$boot_config"
+            echo "gpu_mem=32" >> "$boot_config"
+        fi
+
+        # Append if missing: dtoverlay=disable-bt
+        if ! grep -q "^dtoverlay=disable-bt" "$boot_config"; then
+            echo "" >> "$boot_config"
+            echo "# Kiosk: Disable Bluetooth hardware" >> "$boot_config"
+            echo "dtoverlay=disable-bt" >> "$boot_config"
+        fi
+
+        # Append if missing: disable_splash=1
+        if ! grep -q "^disable_splash=" "$boot_config"; then
+            echo "" >> "$boot_config"
+            echo "# Kiosk: Disable Raspberry Pi firmware splash, use custom splash.png" >> "$boot_config"
+            echo "disable_splash=1" >> "$boot_config"
+        fi
+
+        success "Boot config updated"
+    fi
+
+    # ── cmdline.txt tweaks ────────────────────────────────────────────────
+    local cmdline="/boot/firmware/cmdline.txt"
+    if [[ ! -f "$cmdline" ]]; then
+        cmdline="/boot/cmdline.txt"
+    fi
+
+    if [[ -f "$cmdline" ]]; then
+        info "Configuring $cmdline for kiosk..."
+
+        # Remove serial console (Plymouth needs tty-only console)
+        sed -i 's/console=serial0,[0-9]* //' "$cmdline"
+
+        # Add splash quiet loglevel=3 logo.nologo if missing
+        grep -q "splash" "$cmdline" || sed -i 's/$/ splash quiet loglevel=3 logo.nologo/' "$cmdline"
+
+        # Add video mode if missing
+        grep -q "video=HDMI-A-1" "$cmdline" || sed -i 's/$/ video=HDMI-A-1:1024x600@60/' "$cmdline"
+
+        success "Kernel cmdline updated"
+    fi
+
+    # ── Plymouth splash theme ─────────────────────────────────────────────
+    info "Installing Plymouth boot splash..."
+    local theme_dir="/usr/share/plymouth/themes/spoolbuddy"
+    mkdir -p "$theme_dir"
+
+    # Copy bundled splash image from the install directory
+    local script_dir
+    script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+    if [[ -f "$script_dir/splash.png" ]]; then
+        cp "$script_dir/splash.png" "$theme_dir/splash.png"
+    elif [[ -f "$INSTALL_PATH/spoolbuddy/install/splash.png" ]]; then
+        cp "$INSTALL_PATH/spoolbuddy/install/splash.png" "$theme_dir/splash.png"
+    else
+        warn "splash.png not found — Plymouth splash will not display an image"
+    fi
+
+    # Write .plymouth theme file
+    cat > "$theme_dir/spoolbuddy.plymouth" << 'EOF'
+[Plymouth Theme]
+Name=SpoolBuddy
+Description=SpoolBuddy boot splash
+ModuleName=script
+
+[script]
+ImageDir=/usr/share/plymouth/themes/spoolbuddy
+ScriptFile=/usr/share/plymouth/themes/spoolbuddy/spoolbuddy.script
+EOF
+
+    # Write .script theme file
+    cat > "$theme_dir/spoolbuddy.script" << 'EOF'
+wallpaper_image = Image("splash.png");
+screen_width = Window.GetWidth();
+screen_height = Window.GetHeight();
+resized_wallpaper_image = wallpaper_image.Scale(screen_width, screen_height);
+wallpaper_sprite = Sprite(resized_wallpaper_image);
+wallpaper_sprite.SetZ(-100);
+EOF
+
+    plymouth-set-default-theme spoolbuddy
+    run_with_progress "Updating initramfs" update-initramfs -u
+    success "Plymouth splash installed"
+
+    # ── Auto-login on tty1 ────────────────────────────────────────────────
+    info "Configuring auto-login for $KIOSK_USER..."
+    mkdir -p /etc/systemd/system/getty@tty1.service.d
+
+    cat > /etc/systemd/system/getty@tty1.service.d/autologin.conf << EOF
+[Service]
+ExecStart=
+ExecStart=-/sbin/agetty --autologin $KIOSK_USER --noclear %I \$TERM
+EOF
+
+    success "Auto-login configured"
+
+    # ── labwc rc.xml (no decorations, no keybinds) ────────────────────────
+    info "Configuring labwc window manager..."
+    local labwc_dir="$KIOSK_HOME/.config/labwc"
+    mkdir -p "$labwc_dir"
+
+    cat > "$labwc_dir/rc.xml" << 'EOF'
+<?xml version="1.0"?>
+<labwc_config>
+
+  <theme>
+    <name></name>
+    <cornerRadius>0</cornerRadius>
+  </theme>
+
+  <!-- Disable all keybindings - kiosk lockdown -->
+  <keyboard>
+  </keyboard>
+
+  <!-- Disable right-click menu -->
+  <mouse>
+    <default />
+  </mouse>
+
+  <!-- Remove window decorations, maximize Chromium, prevent unfullscreen -->
+  <windowRules>
+    <windowRule identifier="*">
+      <serverDecoration>no</serverDecoration>
+    </windowRule>
+    <windowRule identifier="chromium">
+      <skipTaskbar>yes</skipTaskbar>
+      <fixedPosition>yes</fixedPosition>
+    </windowRule>
+  </windowRules>
+
+</labwc_config>
+EOF
+
+    # ── labwc autostart ───────────────────────────────────────────────────
+    cat > "$labwc_dir/autostart" << EOF
+# Force 1024x600 (panel doesn't advertise this natively)
+wlr-randr --output HDMI-A-1 --custom-mode 1024x600@60 &
+
+# Enable on-screen keyboard (squeekboard auto-shows on text focus)
+gsettings set org.gnome.desktop.a11y.applications screen-keyboard-enabled true &
+
+# Start squeekboard and move it to overlay layer (layer 3) so it renders above fullscreen
+squeekboard &
+sleep 1
+dbus-send --type=method_call --dest=sm.puri.OSK0 /sm/puri/OSK0 sm.puri.OSK0.SetLayer int32:3 &
+
+# Launch Chromium in kiosk mode (fullscreen)
+chromium --kiosk --no-first-run --disable-infobars \\
+  --disable-session-crashed-bubble --disable-features=TranslateUI \\
+  --noerrdialogs --disable-component-update \\
+  --ozone-platform=wayland --enable-wayland-ime \\
+  $KIOSK_URL &
+EOF
+
+    chown -R "$KIOSK_USER:$KIOSK_USER" "$labwc_dir"
+
+    # ── .bash_profile (source .bashrc, exec labwc on tty1) ────────────────
+    cat > "$KIOSK_HOME/.bash_profile" << 'EOF'
+# Source .bashrc if it exists
+if [ -f ~/.bashrc ]; then
+  . ~/.bashrc
+fi
+
+# Auto-start kiosk on tty1
+if [ "$(tty)" = "/dev/tty1" ]; then
+  exec labwc
+fi
+EOF
+
+    chown "$KIOSK_USER:$KIOSK_USER" "$KIOSK_HOME/.bash_profile"
+
+    REBOOT_NEEDED="true"
+    success "Kiosk setup complete"
+}
+
 # ─────────────────────────────────────────────────────────────────────────────
 # User Prompts
 # ─────────────────────────────────────────────────────────────────────────────
@@ -758,6 +1042,15 @@ main() {
     detect_python || error "Failed to install Python 3.10+"
     echo ""
 
+    # ── Step 2b: Strip unnecessary services & packages ────────────────────
+    strip_services
+    strip_packages
+    echo ""
+
+    # ── Step 2c: Kiosk setup (labwc + Chromium + squeekboard + Plymouth) ──
+    setup_kiosk
+    echo ""
+
     # ── Step 3: Download source code ──────────────────────────────────────
     create_spoolbuddy_user
     download_spoolbuddy
@@ -792,21 +1085,27 @@ main() {
     echo -e "${GREEN}╚══════════════════════════════════════════════════════════╝${NC}"
     echo ""
 
-    if [[ "$INSTALL_MODE" == "full" ]]; then
-        local ip_addr
-        ip_addr=$(hostname -I 2>/dev/null | awk '{print $1}') || ip_addr="<your-ip>"
+    local ip_addr
+    ip_addr=$(hostname -I 2>/dev/null | awk '{print $1}') || ip_addr="<your-ip>"
 
+    if [[ "$INSTALL_MODE" == "full" ]]; then
         echo -e "  ${BOLD}Bambuddy:${NC}         ${CYAN}http://$ip_addr:$BAMBUDDY_PORT${NC}"
-        echo ""
-        echo -e "  ${BOLD}Next steps:${NC}"
-        echo -e "    1. Reboot to apply hardware changes"
-        echo -e "    2. Open Bambuddy in your browser"
-        echo -e "    3. Go to Settings -> API Keys and create an API key"
-        echo -e "    4. Update the API key in: ${CYAN}$INSTALL_PATH/spoolbuddy/.env${NC}"
-        echo -e "    5. Restart SpoolBuddy: ${CYAN}sudo systemctl restart spoolbuddy${NC}"
     else
         echo -e "  ${BOLD}SpoolBuddy:${NC}       Connecting to ${CYAN}$BAMBUDDY_URL${NC}"
     fi
+    echo -e "  ${BOLD}Kiosk URL:${NC}        ${CYAN}$KIOSK_URL${NC}"
+    echo -e "  ${BOLD}Kiosk user:${NC}       ${CYAN}$KIOSK_USER${NC}"
+    echo ""
+
+    if [[ "$INSTALL_MODE" == "full" ]]; then
+        echo -e "  ${BOLD}Next steps:${NC}"
+        echo -e "    1. Reboot (required for kiosk, Plymouth splash, and hardware changes)"
+        echo -e "    2. The touchscreen kiosk will start automatically after reboot"
+        echo -e "    3. On another device, open ${CYAN}http://$ip_addr:$BAMBUDDY_PORT${NC}"
+        echo -e "    4. Go to Settings -> API Keys and create an API key"
+        echo -e "    5. Update the API key in: ${CYAN}$INSTALL_PATH/spoolbuddy/.env${NC}"
+        echo -e "    6. Restart SpoolBuddy: ${CYAN}sudo systemctl restart spoolbuddy${NC}"
+    fi
 
     echo ""
     echo -e "  ${BOLD}Manage services:${NC}"
@@ -823,35 +1122,12 @@ main() {
     echo -e "  ${BOLD}Diagnostics:${NC}      ${CYAN}sudo $INSTALL_PATH/spoolbuddy/venv/bin/python $INSTALL_PATH/spoolbuddy/pn5180_diag.py${NC}"
     echo ""
 
-    if [[ "$REBOOT_NEEDED" == "true" ]]; then
-        echo -e "  ${YELLOW}A reboot is required to apply SPI/I2C changes.${NC}"
-        echo ""
-        if prompt_yes_no "Reboot now?" "y"; then
-            reboot
-        else
-            echo -e "  Run ${CYAN}sudo reboot${NC} when ready."
-        fi
+    echo -e "  ${YELLOW}A reboot is required to apply all changes (kiosk, Plymouth splash, hardware).${NC}"
+    echo ""
+    if prompt_yes_no "Reboot now?" "y"; then
+        reboot
     else
-        # SPI/I2C already configured — start services now
-        if prompt_yes_no "Start services now?" "y"; then
-            if [[ "$INSTALL_MODE" == "full" ]]; then
-                systemctl start bambuddy
-                sleep 2
-                if systemctl is-active --quiet bambuddy; then
-                    success "Bambuddy is running"
-                else
-                    warn "Bambuddy may have failed to start. Check: sudo journalctl -u bambuddy -f"
-                fi
-            fi
-
-            systemctl start spoolbuddy
-            sleep 2
-            if systemctl is-active --quiet spoolbuddy; then
-                success "SpoolBuddy is running"
-            else
-                warn "SpoolBuddy may have failed to start. Check: sudo journalctl -u spoolbuddy -f"
-            fi
-        fi
+        echo -e "  Run ${CYAN}sudo reboot${NC} when ready."
     fi
 
     echo ""