Updated README

CHANGELOG.md

@@ -7,9 +7,13 @@ All notable changes to Bambuddy will be documented in this file.
 ### New Features
 - **Virtual Printer Queue Auto-Dispatch Toggle** ([#587](https://github.com/maziggy/bambuddy/issues/587)) — Added an "Auto-dispatch" toggle to virtual printers in Queue mode. When enabled (default), prints sent from the slicer are added to the queue and start automatically on the assigned printer — matching the current behavior. When disabled, prints are added to the queue with `manual_start` set, so they wait for manual dispatch. This allows users who want to review and manually assign prints before they start. Requested by @Percy2Live.
 - **Queue All Plates** ([#530](https://github.com/maziggy/bambuddy/issues/530)) — Multi-plate 3MF files can now be queued in one action. When adding a multi-plate file to the queue, a "Queue All N Plates" toggle appears in the plate selector. When activated, every plate is added as a separate queue entry (one per plate × per selected printer), each individually editable from the queue page. The toggle is only available in add-to-queue mode (not reprint or edit). Requested by @Dendrowen.
+- **Malaysian Ringgit Currency** ([#634](https://github.com/maziggy/bambuddy/issues/634)) — Added MYR (RM) to the list of supported currencies for filament cost tracking. Requested by @cynogen127.
+- **ETA Variable in Notifications** ([#638](https://github.com/maziggy/bambuddy/issues/638)) — Added `{eta}` template variable to print start, print progress, and queue job started notifications. Shows the estimated wall-clock completion time (e.g. "15:53" or "3:53 PM") based on the user's configured time format (12h/24h). Existing `{estimated_time}` still shows duration ("1h 23m"). Requested by @SebSeifert.
+- **Bulk Delete Spool and Color Catalog Entries** ([#646](https://github.com/maziggy/bambuddy/issues/646)) — Added checkbox selection and bulk delete to both the Spool Catalog and Color Catalog in Settings > Filament. Select individual entries with checkboxes, use the header checkbox to select/deselect all visible entries, then click "Delete Selected" to remove them in one operation. Previously, entries could only be deleted one at a time. Requested by @SebSeifert.
 
 ### Improved
 - **Higher FTP Timeout Options for Large Files** ([#660](https://github.com/maziggy/bambuddy/issues/660)) — Added 180s and 300s FTP timeout options in Settings. The previous maximum of 120s was insufficient for large 3MF files (e.g. 28 MB Hueforge models) which can't be downloaded from the printer's FTP server within 2 minutes, especially during active printing. Reported by @PasDoe.
+- **Separate Permission for AMS Spool Assignments** ([#635](https://github.com/maziggy/bambuddy/issues/635)) — Added a new `inventory:view_assignments` permission that controls whether spool-to-AMS-slot assignment data is visible on the Printers page. Previously, viewing spool assignments on printer cards required `inventory:read`, which also exposed the full Inventory page in the sidebar. Admins can now grant `inventory:view_assignments` without `inventory:read` so users can see what's loaded in the AMS without accessing the full spool inventory. All default groups (Administrators, Operators, Viewers) include the new permission automatically. Also fixed multi-word permission labels in the group editor (e.g. "Update_Own" → "Update Own"). Reported by @Minebuddy.
 
 ### Fixed
 - **Clear Plate Prompt Shown for Staged Queue Items** — The "Clear Plate & Start Next" button on the printer card appeared when all pending queue items were staged (`manual_start`/Queue Only), even though the scheduler won't auto-start them. The clear plate prompt now only appears when there are auto-dispatchable items that the scheduler will actually start after the plate is cleared.
@@ -17,22 +21,11 @@ All notable changes to Bambuddy will be documented in this file.
 - **GitHub Backup Required Cloud Login** ([#655](https://github.com/maziggy/bambuddy/issues/655)) — The GitHub backup settings card was completely blocked behind Bambu Cloud authentication, showing "Bambu Cloud login required" even though the backup feature works without it (K-profiles and app settings don't need cloud). Removed the cloud auth gate so GitHub backup can be configured and used without Bambu Cloud. The "Cloud Profiles" checkbox is disabled with a hint when not logged in. Reported by @TravisWilder.
 - **GitHub Backup Log Timestamps Off by 1 Hour** — Backup log timestamps in the history table were displayed in UTC instead of the user's local timezone. The local `formatDateTime` function didn't use `parseUTCDate`, so timezone-less timestamps from SQLite were interpreted as local time. Now uses the shared `parseUTCDate` utility for correct UTC-to-local conversion.
 - **H2D AMS Units Shown on Wrong Nozzle** ([#659](https://github.com/maziggy/bambuddy/issues/659)) — On the H2D dual-nozzle printer, AMS units were displayed on the wrong nozzle (e.g. both AMS-HT and AMS2 Pro shown on the left nozzle instead of their correct assignments). Three interrelated bugs in the AMS `info` field parsing: (1) the field was parsed as decimal instead of hexadecimal (BambuStudio uses `std::stoull(str, nullptr, 16)`), (2) the extruder ID was extracted as a single bit instead of a 4-bit field, and (3) partial MQTT updates overwrote the full extruder map instead of merging. Now correctly hex-parses the `info` field, extracts the 4-bit extruder ID from bits 8-11, skips uninitialized AMS units (`0xE`), and merges partial updates into the existing map. Reported by @cadtoolbox.
-
-## [0.2.2b3] - Unreleased
-
-### New Features
-- **Malaysian Ringgit Currency** ([#634](https://github.com/maziggy/bambuddy/issues/634)) — Added MYR (RM) to the list of supported currencies for filament cost tracking. Requested by @cynogen127.
-- **ETA Variable in Notifications** ([#638](https://github.com/maziggy/bambuddy/issues/638)) — Added `{eta}` template variable to print start, print progress, and queue job started notifications. Shows the estimated wall-clock completion time (e.g. "15:53" or "3:53 PM") based on the user's configured time format (12h/24h). Existing `{estimated_time}` still shows duration ("1h 23m"). Requested by @SebSeifert.
-- **Bulk Delete Spool and Color Catalog Entries** ([#646](https://github.com/maziggy/bambuddy/issues/646)) — Added checkbox selection and bulk delete to both the Spool Catalog and Color Catalog in Settings > Filament. Select individual entries with checkboxes, use the header checkbox to select/deselect all visible entries, then click "Delete Selected" to remove them in one operation. Previously, entries could only be deleted one at a time. Requested by @SebSeifert.
-
-### Improved
-- **Separate Permission for AMS Spool Assignments** ([#635](https://github.com/maziggy/bambuddy/issues/635)) — Added a new `inventory:view_assignments` permission that controls whether spool-to-AMS-slot assignment data is visible on the Printers page. Previously, viewing spool assignments on printer cards required `inventory:read`, which also exposed the full Inventory page in the sidebar. Admins can now grant `inventory:view_assignments` without `inventory:read` so users can see what's loaded in the AMS without accessing the full spool inventory. All default groups (Administrators, Operators, Viewers) include the new permission automatically. Also fixed multi-word permission labels in the group editor (e.g. "Update_Own" → "Update Own"). Reported by @Minebuddy.
-
-### Fixed
 - **SD Card Error After FTP Upload** ([#645](https://github.com/maziggy/bambuddy/issues/645)) — After printing one file, subsequent prints could fail with `0500-C010 "MicroSD Card read/write exception"` until Bambuddy was restarted. The FTP upload used `transfercmd()` for A1 compatibility but skipped reading the server's 226 "Transfer complete" response, leaving the SD card file write unconfirmed. The print command was sent via MQTT before the printer's FTP server had finished flushing the file to disk. Now waits for the 226 confirmation after each upload (with a 60-second timeout for slower models like H2D). Reported by @lanfi89, confirmed by @Bademeister89.
 - **P2S Shows Carbon Rod Maintenance Tasks** ([#640](https://github.com/maziggy/bambuddy/issues/640)) — The P2S was incorrectly classified as a carbon rod printer, showing "Lubricate Carbon Rods" and "Clean Carbon Rods" maintenance tasks. The P2S uses hardened steel linear shafts, not carbon fiber rods. Added a new `steel_rod` motion system category and "Lubricate Steel Rods" / "Clean Steel Rods" maintenance tasks specific to the P2S. X1/P1 series continue to show carbon rod tasks; A1/H2 series continue to show linear rail tasks. Reported by @maziggy.
 - **Dispatch Toast Stuck After Second Print** — The print dispatch progress toast ("Starting prints…") stayed visible forever after the second print dispatch in a session. The dedup guard (`lastDispatchSummaryRef`) that prevents duplicate completion toasts was never reset between batches, so every single-printer dispatch produced the same summary key (`"first-complete:1:0"`). The first print completed normally, but subsequent completions matched the stale ref and skipped creating the done toast — leaving the progress toast stuck in "Processing" state with no way to dismiss except a page reload. Now resets the dedup guard whenever the dispatch toast is dismissed (auto-dismiss timeout, cleanup events) and when a new batch starts.
 
+
 ## [0.2.2b2] - 2026-03-06
 
 ### New Features