|
|
@@ -160,10 +160,12 @@ Optional but recommended — drop the [`slicer-api/` Compose stack](slicer-api/R
|
|
|
- **AMS Filament Backup status + control with pair view** — Mirrors BambuStudio's per-printer "AMS Filament Backup" auto-switch (when a spool runs out, the printer rolls over to a same-preset, same-colour spool in another slot). A small badge in the Filaments section header on each printer card shows the live state (blue circular-arrow icon = ON, dim = OFF, "?" = A1 family with no `cfg` field yet); click to open the AMS Filament Backup modal — a BambuStudio Auto Refill-style ring graphic per backup pair, with the filament colour as the ring fill and member slot labels (e.g. `A·1`, `B·3`) on contrast-aware pills around the band. Dual-extruder printers (H2D / H2C / X2D) carry an `R` / `L` badge per ring because the firmware can't cross extruders. State syncs in real time whether you toggled from Bambuddy, BambuStudio, or the printer's touchscreen. Bambuddy's "insufficient filament" check is **backup-aware**: when Backup is ON, the deficit check pools remaining grams across same-`(preset, colour)` spools on the printer, so the warning doesn't fire spuriously when the firmware will swap to a peer mid-print (#1762). Bambuddy's **Prefer Lowest Remaining Filament** sort also respects the toggle — when Backup is OFF the dispatcher skips the prefer-lowest sort entirely so it won't reach for a near-empty spool the printer can't roll off of.
|
|
|
- AMS slot configuration (model-filtered presets, K profiles, color picker, pre-population for configured slots)
|
|
|
- AMS info card (hover for serial number, firmware version) with custom friendly names that persist across printers
|
|
|
-- **AMS remote drying** — Start, monitor, and stop drying sessions for AMS 2 Pro and AMS-HT directly from the Printers page with filament-based temperature/duration presets, optional spool rotation; automatic PSU detection and HMS power error reporting
|
|
|
+- **AMS remote drying** — Start, monitor, and stop drying sessions for AMS 2 Pro and AMS-HT directly from the Printers page with filament-based temperature/duration presets, optional spool rotation; automatic PSU detection and HMS power error reporting. Rotate-spool toggle is disabled per-AMS when any tray has filament threaded into the feed tube (the AMS mechanism is locked there — rotating would jam the filament)
|
|
|
- **Queue auto-drying** — Automatically dry filament between scheduled prints when humidity exceeds threshold; configurable presets per filament type, optional blocking mode
|
|
|
- **Ambient drying** — Automatically keep filament dry on idle printers based on humidity, regardless of whether prints are queued
|
|
|
+- **Continue drying while printing** — On capable hardware (H2D 01.03.00.00+, H2C / H2S / P2S / H2D Pro 01.02.00.00+, X2D / A2L 01.01.00.00+, X1C 01.11.02.00+), auto-drying can keep running during a print. Default off, opt-in toggle in Settings → Print Queue. Drying temperature is automatically capped 5°C below the idle preset (floor 40°C) to protect spools inside the hot enclosure
|
|
|
- Configurable drying presets per filament type (temperature & duration for AMS 2 Pro and AMS-HT)
|
|
|
+- **Per-filament humidity threshold** — Set a different humidity trigger per filament type (e.g. Nylon at 20%, PLA at 60%, ASA at 30%) instead of one global value. Mixed-material AMS units use the most-restrictive threshold across the loaded spools so a single PLA + Nylon unit triggers at Nylon's level. Drives both the auto-drying scheduler and the hourly humidity alarm so the two can never disagree on whether a unit is "too humid"
|
|
|
- Dual external spool support for H2D (Ext-L / Ext-R)
|
|
|
- HMS error monitoring with history and clear errors
|
|
|
- **Heater history charts** — Bambuddy logs nozzle, bed, and chamber readings every minute and surfaces them via a tiny chart icon on each heater tile in the printer card. Click for a per-heater modal with current / average / min / max stats, target overlay, and a 6h / 24h / 48h / 7d time range — works on read-only chamber sensors (X1C / P2S) too. AMS humidity and temperature get the same treatment (already shipped).
|
maziggy