Bug report logs 373a9ae62ffa404f89898d235015bd88.log

logs/373a9ae62ffa404f89898d235015bd88.log

@@ -0,0 +1,200 @@
+2026-09-13 21:24:58,048 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:24:58,048 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:24:58,049 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:24:58,049 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
+2026-09-13 21:24:58,049 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
+2026-09-13 21:24:58,050 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:24:58,050 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:24:58,051 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:24:58,512 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:44383
+2026-09-13 21:24:58,513 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
+2026-09-13 21:24:58,605 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:24:58,606 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:24:58,606 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:24:58,607 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:24:58,608 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
+2026-09-13 21:24:58,608 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
+2026-09-13 21:24:58,608 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:24:58,609 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:24:58,610 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:24:58,864 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:24:58,871 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:24:58,873 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:24:58,880 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:24:58,884 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
+2026-09-13 21:24:58,885 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
+2026-09-13 21:24:58,887 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:24:58,888 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:24:58,889 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:24:59,130 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:24:59,132 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:24:59,136 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:24:59,139 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:24:59,142 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
+2026-09-13 21:24:59,146 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
+2026-09-13 21:24:59,154 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:24:59,158 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:24:59,160 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:24:59,190 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 178795 bytes
+2026-09-13 21:24:59,198 INFO [backend.app.main] [-] [SNAPSHOT] Fresh camera frame: 178795 bytes
+2026-09-13 21:24:59,199 DEBUG [backend.app.main] [-] [FINISH-PHOTO-BANK] banked in-print frame for printer 2 at layer 2/47 (178795 bytes)
+2026-09-13 21:24:59,616 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:24:59,617 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:24:59,618 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:24:59,619 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:24:59,620 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
+2026-09-13 21:24:59,620 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
+2026-09-13 21:24:59,621 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:24:59,621 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:24:59,622 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:24:59,871 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:24:59,874 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:24:59,874 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:24:59,879 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:24:59,880 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
+2026-09-13 21:24:59,883 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
+2026-09-13 21:24:59,889 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:24:59,892 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:24:59,895 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:00,139 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:00,141 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:00,143 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:00,147 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:00,148 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
+2026-09-13 21:25:00,148 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
+2026-09-13 21:25:00,149 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:00,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:00,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:00,649 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:00,649 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:00,650 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:00,651 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:00,651 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
+2026-09-13 21:25:00,652 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
+2026-09-13 21:25:00,652 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:00,653 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:00,653 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:00,889 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:00,890 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:00,896 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:00,897 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:00,898 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
+2026-09-13 21:25:00,899 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
+2026-09-13 21:25:00,901 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:00,903 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:00,905 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:00,951 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 123010 bytes
+2026-09-13 21:25:01,148 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:01,149 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:01,149 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:01,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:01,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
+2026-09-13 21:25:01,150 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
+2026-09-13 21:25:01,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:01,151 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:01,152 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:01,611 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:39485
+2026-09-13 21:25:01,612 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
+2026-09-13 21:25:01,653 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:01,654 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:01,654 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:01,655 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:01,656 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
+2026-09-13 21:25:01,656 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
+2026-09-13 21:25:01,656 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:01,657 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:01,658 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:01,901 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:01,901 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:01,901 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:01,902 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] AMS dict fields: {'ams_exist_bits': '7', 'ams_exist_bits_raw': '7', 'insert_flag': True, 'power_on_flag': False, 'tray_exist_bits': 'fe7', 'tray_is_bbl_bits': 'fe7', 'tray_now': '2', 'tray_pre': '2', 'tray_read_done_bits': 'fe7', 'tray_reading_bits': '0', 'tray_tar': '2', 'version': 359910}
+2026-09-13 21:25:01,902 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:01,903 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
+2026-09-13 21:25:01,903 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
+2026-09-13 21:25:01,904 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:01,904 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:01,904 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:02,165 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:02,166 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:02,166 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:02,167 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:02,168 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
+2026-09-13 21:25:02,168 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
+2026-09-13 21:25:02,169 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:02,170 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:02,170 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:02,692 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:02,693 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:02,693 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:02,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:02,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
+2026-09-13 21:25:02,694 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
+2026-09-13 21:25:02,695 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:02,695 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:02,696 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:02,914 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:02,915 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:02,915 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:02,916 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:02,917 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
+2026-09-13 21:25:02,917 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
+2026-09-13 21:25:02,918 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:02,918 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:02,919 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:03,191 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:03,200 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:03,201 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:03,207 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:03,214 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
+2026-09-13 21:25:03,222 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
+2026-09-13 21:25:03,223 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:03,235 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:03,237 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:03,482 INFO [backend.app.services.camera] [-] Successfully captured camera frame bytes: 155070 bytes
+2026-09-13 21:25:03,735 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:03,738 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:03,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:03,743 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:03,743 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
+2026-09-13 21:25:03,746 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
+2026-09-13 21:25:03,751 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:03,751 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:03,752 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:03,941 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:03,945 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:03,949 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:03,951 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:03,953 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
+2026-09-13 21:25:03,959 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
+2026-09-13 21:25:03,960 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:03,961 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:03,961 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:04,191 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:04,192 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:04,192 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:04,193 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:04,193 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 38.0
+2026-09-13 21:25:04,193 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 38.0°C (heater OFF)
+2026-09-13 21:25:04,194 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:04,194 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:04,195 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: M5Paper_Full_Body_and_Back_Test_Marine_Blue_Ludicrous
+2026-09-13 21:25:04,304 DEBUG [backend.app.services.camera] [-] TLS proxy for [IP]:322 listening on [IP]:46171
+2026-09-13 21:25:04,304 INFO [backend.app.services.camera] [-] Capturing camera frame bytes from [IP] using RTSP (model: X1C)
+2026-09-13 21:25:04,739 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:04,739 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:04,740 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:04,740 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:04,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 32.0
+2026-09-13 21:25:04,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 32.0°C (heater OFF)
+2026-09-13 21:25:04,741 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:04,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:04,742 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Inset_vs_Raised_Faces_and_100_Badges_Gray_Base_Green_Ivory_Standard
+2026-09-13 21:25:04,970 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Found xcam inside print data: {'allow_skip_parts': False, 'buildplate_marker_detector': True, 'first_layer_inspector': True, 'halt_print_sensitivity': 'medium', 'print_halt': True, 'printing_monitor': True, 'spaghetti_detector': True}
+2026-09-13 21:25:04,970 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Parsing xcam data - all fields: ['allow_skip_parts', 'buildplate_marker_detector', 'first_layer_inspector', 'halt_print_sensitivity', 'print_halt', 'printing_monitor', 'spaghetti_detector']
+2026-09-13 21:25:04,970 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received gcode_state: RUNNING, gcode_file: /data/Metadata/plate_1.gcode, subtask_name: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous
+2026-09-13 21:25:04,971 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] Received command response: push_status
+2026-09-13 21:25:04,971 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper raw value: 36.0
+2026-09-13 21:25:04,972 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] chamber_temper direct value: 36.0°C (heater OFF)
+2026-09-13 21:25:04,972 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] HMS data received: []
+2026-09-13 21:25:04,973 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] lights_report: [{'mode': 'on', 'node': 'chamber_light'}, {'mode': 'flashing', 'node': 'work_light'}]
+2026-09-13 21:25:04,973 DEBUG [backend.app.services.bambu_mqtt] [-] [[SERIAL]] gcode_state: RUNNING -> RUNNING, file: /data/Metadata/plate_1.gcode, subtask: NFC_Taper_Test_Case_and_4_Flush_Screws_Nardo_Gray_Ludicrous