fix(printers): recover MQTT sessions that stopped reconnecting (#2732)

    The reporter's printer lost its session to a keep-alive timeout at 02:19
    and did not come back until 11:24 — nine hours offline, with the web UI
    open throughout.

    check_staleness() was never going to catch it. Its first line is
    `if self.state.connected and self.is_stale()`, so it only ever handles the
    half-broken session that is still connected but has gone quiet. This
    client had connected=False from 02:19:42 (the offline notification fired a
    minute later), so every call returned immediately, and paho's own retry was
    the only thing left watching. When that stopped making progress nothing
    noticed.

    Adds a sweep every 60s that rebuilds a client when all four hold: it is
    disconnected, it had a working session before, it has been silent for five
    minutes, and its MQTT port still answers. The port check is what keeps this
    from becoming a nuisance — a switched-off printer is left to paho, so a
    farm powering down overnight causes no client churn and no log spam. The
    five-minute grace sits well past the 60s stale timeout and the 30s max
    reconnect backoff, so a session recovering on its own is never interrupted.

    The rebuild goes through force_reconnect_stale_session from async context,
    which takes the hard-reset path: fresh client_id and paho's QoS 1 queue
    dropped, so a project_file left unacked on the dead session cannot replay
    into the new one and trip 0500_4003 (#1136). Rate-limited per printer,
    cooldown cleared when the printer returns, and the sweep continues past a
    client that throws rather than abandoning the rest of the farm. The log
    line names how long the printer was gone and the last connect error, so a
    session that dies repeatedly leaves a trail.

    check_port gains a public alias in printer_diagnostic rather than having
    the watchdog reach for the private name.

    Also corrects the Developer Mode path added in the previous commit: the
    wiki documents it under Settings > Network, not Settings > General. The
    menu path is dropped from the translated string entirely, since it varies
    by model and firmware and the wiki carries the detail.

backend/app/main.py

@@ -6661,6 +6661,130 @@ def stop_spoolbuddy_watchdog():
         logging.getLogger(__name__).info("SpoolBuddy watchdog stopped")
 
 
+# Dead-MQTT-session recovery
+#
+# check_staleness() covers the "connected but silent" half-broken session. It
+# does nothing once ``state.connected`` is False, and paho's own auto-reconnect
+# is the only thing left watching at that point. When paho stops making
+# progress there is no backstop at all: the #2732 bundle has a P1S drop on a
+# keep-alive timeout at 02:19 and not reconnect until 11:24 — nine hours
+# offline with the UI open the whole time, recovered only when something
+# happened to nudge it.
+#
+# This loop is that backstop. It only touches printers that had a working
+# session and lost it, and only when the MQTT port still answers — a printer
+# that is simply switched off is left to paho, since rebuilding a client
+# against an unreachable host achieves nothing and would fill the log every
+# night.
+_connection_watchdog_task: asyncio.Task | None = None
+CONNECTION_WATCHDOG_INTERVAL = 60
+# How long a printer must have been silent before we stop trusting paho.
+# Comfortably above STALE_TIMEOUT (60 s) and the max reconnect backoff (30 s),
+# so a session that is recovering on its own is never interrupted.
+CONNECTION_WATCHDOG_OFFLINE_GRACE = 300
+# Per-printer floor between rebuild attempts.
+CONNECTION_WATCHDOG_RETRY_INTERVAL = 300
+_connection_watchdog_last_attempt: dict[int, float] = {}
+
+
+async def _recover_dead_printer_sessions() -> int:
+    """Rebuild MQTT clients that have been offline too long to still be trying.
+
+    Returns the number of printers a rebuild was attempted for (for tests and
+    for the caller's logging). Never raises: one unreachable printer must not
+    stop the sweep for the rest of the farm.
+    """
+    logger = logging.getLogger(__name__)
+    from backend.app.services.printer_diagnostic import PORT_MQTT, check_port
+
+    now = time.monotonic()
+    recovered = 0
+
+    for printer_id, client in list(printer_manager._clients.items()):
+        try:
+            if client.state.connected:
+                _connection_watchdog_last_attempt.pop(printer_id, None)
+                continue
+
+            # Time since the last inbound message is the age of the last known
+            # good session — no extra bookkeeping needed, and it is the same
+            # clock is_stale() reads. 0 means this client has never had one:
+            # that is the initial-connect path, where paho retrying is the
+            # correct and only behaviour, so leave it be.
+            last_msg = client._last_message_time
+            if not last_msg:
+                continue
+            offline_for = time.time() - last_msg
+            if offline_for < CONNECTION_WATCHDOG_OFFLINE_GRACE:
+                continue
+
+            last_attempt = _connection_watchdog_last_attempt.get(printer_id)
+            if last_attempt is not None and now - last_attempt < CONNECTION_WATCHDOG_RETRY_INTERVAL:
+                continue
+
+            if not await check_port(client.ip_address, PORT_MQTT):
+                # Switched off, unplugged, or off the network. Paho's retry is
+                # the right handler; say so at debug level and move on.
+                logger.debug(
+                    "[#2732] Printer %s offline for %.0fs and its MQTT port is not answering "
+                    "— leaving the reconnect to paho",
+                    printer_id,
+                    offline_for,
+                )
+                _connection_watchdog_last_attempt[printer_id] = now
+                continue
+
+            _connection_watchdog_last_attempt[printer_id] = now
+            recovered += 1
+            logger.warning(
+                "[#2732] Printer %s has been offline for %.0fs but answers on MQTT port %d — "
+                "rebuilding the client with a fresh session (last connect error: %s)",
+                printer_id,
+                offline_for,
+                PORT_MQTT,
+                client.last_connect_error or "none recorded",
+            )
+            # Async context, so this takes the hard-reset path: fresh client_id,
+            # paho's QoS 1 queue dropped. That matters — a project_file left
+            # unacked on the dead session would otherwise replay into the new
+            # one and trip 0500_4003 on the printer (#1136).
+            client.force_reconnect_stale_session(f"offline for {offline_for:.0f}s, port still answering")
+        except Exception as e:
+            logger.warning("[#2732] Connection watchdog failed for printer %s: %s", printer_id, e)
+
+    return recovered
+
+
+async def _connection_watchdog_loop():
+    logger = logging.getLogger(__name__)
+    # Let the initial connects settle before judging anyone offline.
+    await asyncio.sleep(CONNECTION_WATCHDOG_OFFLINE_GRACE)
+    while True:
+        try:
+            await _recover_dead_printer_sessions()
+        except asyncio.CancelledError:
+            break
+        except Exception as e:
+            logger.warning("Connection watchdog sweep failed: %s", e)
+        await asyncio.sleep(CONNECTION_WATCHDOG_INTERVAL)
+
+
+def start_connection_watchdog():
+    global _connection_watchdog_task
+    if _connection_watchdog_task is None:
+        _connection_watchdog_task = asyncio.create_task(_connection_watchdog_loop())
+        logging.getLogger(__name__).info("Printer connection watchdog started")
+
+
+def stop_connection_watchdog():
+    global _connection_watchdog_task
+    if _connection_watchdog_task:
+        _connection_watchdog_task.cancel()
+        _connection_watchdog_task = None
+        _connection_watchdog_last_attempt.clear()
+        logging.getLogger(__name__).info("Printer connection watchdog stopped")
+
+
 # Camera stream orphan cleanup
 _camera_cleanup_task: asyncio.Task | None = None
 CAMERA_CLEANUP_INTERVAL = 60
@@ -7218,6 +7342,9 @@ async def lifespan(app: FastAPI):
     # Start camera stream orphan cleanup
     start_camera_cleanup()
 
+    # Start the backstop for MQTT sessions paho has stopped recovering (#2732)
+    start_connection_watchdog()
+
     # One-shot sweep for timelapse session directories orphaned by a crash
     # or restart that happened mid-print (in-memory session tracking can't
     # survive that, and nothing else reaps the leftover frames/output file)
@@ -7270,6 +7397,7 @@ async def lifespan(app: FastAPI):
     stop_runtime_tracking()
     stop_spoolbuddy_watchdog()
     stop_camera_cleanup()
+    stop_connection_watchdog()
     from backend.app.services.loop_watchdog import stop_loop_watchdog
 
     stop_loop_watchdog()

backend/app/services/printer_diagnostic.py

@@ -57,6 +57,12 @@ async def _check_port(ip: str, port: int, timeout: float = _PORT_PROBE_TIMEOUT)
         return False
 
 
+# Public alias. The connection watchdog probes the MQTT port before rebuilding a
+# client, so it can tell "the printer is switched off" (leave it alone, paho will
+# keep retrying) from "the printer is answering but our session is dead" (#2732).
+check_port = _check_port
+
+
 def _auth_reason_params(reason: str | None) -> dict:
     """Map a client's CONNACK-refusal slug onto the check's `params.reason`.
 

backend/tests/unit/test_connection_watchdog.py

@@ -0,0 +1,157 @@
+"""Tests for the dead-MQTT-session watchdog (#2732).
+
+``check_staleness()`` guards the "connected but silent" session and returns
+immediately once ``state.connected`` is False — from there, paho's own
+auto-reconnect is the only thing still watching. The #2732 bundle shows what
+happens when that stops making progress: a P1S dropped on a keep-alive timeout
+at 02:19 and did not reconnect until 11:24, nine hours offline with the UI open
+throughout.
+
+This watchdog is the backstop. The rules it has to keep are narrow on purpose —
+it must not interfere with a session that is recovering on its own, and it must
+not churn clients for printers that are simply switched off.
+"""
+
+import time
+from types import SimpleNamespace
+from unittest.mock import AsyncMock, MagicMock, patch
+
+import pytest
+
+from backend.app.main import (
+    CONNECTION_WATCHDOG_OFFLINE_GRACE,
+    CONNECTION_WATCHDOG_RETRY_INTERVAL,
+    _connection_watchdog_last_attempt,
+    _recover_dead_printer_sessions,
+)
+
+
+def _client(*, connected: bool, last_message_age: float | None, ip: str = "192.168.1.100"):
+    """Stand-in for BambuMQTTClient with only the fields the watchdog reads."""
+    return SimpleNamespace(
+        state=SimpleNamespace(connected=connected),
+        _last_message_time=0.0 if last_message_age is None else time.time() - last_message_age,
+        ip_address=ip,
+        last_connect_error=None,
+        force_reconnect_stale_session=MagicMock(),
+    )
+
+
+async def _sweep(clients: dict, *, port_open: bool = True):
+    with (
+        patch("backend.app.main.printer_manager._clients", clients),
+        patch("backend.app.services.printer_diagnostic.check_port", AsyncMock(return_value=port_open)),
+    ):
+        return await _recover_dead_printer_sessions()
+
+
+@pytest.fixture(autouse=True)
+def _clear_cooldowns():
+    _connection_watchdog_last_attempt.clear()
+    yield
+    _connection_watchdog_last_attempt.clear()
+
+
+class TestRebuildsDeadSessions:
+    @pytest.mark.asyncio
+    async def test_rebuilds_a_long_dead_session(self):
+        """The #2732 case: offline for hours, printer answering the whole time."""
+        client = _client(connected=False, last_message_age=32718.0)
+
+        assert await _sweep({1: client}) == 1
+        client.force_reconnect_stale_session.assert_called_once()
+
+    @pytest.mark.asyncio
+    async def test_reconnect_reason_names_the_duration(self):
+        client = _client(connected=False, last_message_age=32718.0)
+        await _sweep({1: client})
+        assert "32718" in client.force_reconnect_stale_session.call_args.args[0]
+
+    @pytest.mark.asyncio
+    async def test_sweeps_every_printer_in_the_farm(self):
+        clients = {i: _client(connected=False, last_message_age=9999.0) for i in range(1, 4)}
+        assert await _sweep(clients) == 3
+
+
+class TestLeavesHealthyAndRecoveringSessionsAlone:
+    @pytest.mark.asyncio
+    async def test_connected_printer_is_untouched(self):
+        client = _client(connected=True, last_message_age=99999.0)
+        assert await _sweep({1: client}) == 0
+        client.force_reconnect_stale_session.assert_not_called()
+
+    @pytest.mark.asyncio
+    async def test_inside_the_grace_period_paho_keeps_the_job(self):
+        """Below the grace window a reconnect may well be in flight; interrupting
+        it would turn a self-healing blip into a forced session rebuild."""
+        client = _client(connected=False, last_message_age=CONNECTION_WATCHDOG_OFFLINE_GRACE - 30)
+        assert await _sweep({1: client}) == 0
+        client.force_reconnect_stale_session.assert_not_called()
+
+    @pytest.mark.asyncio
+    async def test_a_client_that_never_had_a_session_is_left_to_paho(self):
+        """No inbound message ever means this is the initial connect, where
+        retrying is both correct and the only thing to do."""
+        client = _client(connected=False, last_message_age=None)
+        assert await _sweep({1: client}) == 0
+        client.force_reconnect_stale_session.assert_not_called()
+
+    @pytest.mark.asyncio
+    async def test_reconnecting_clears_the_cooldown(self):
+        """A printer that comes back must not carry a stale cooldown into its
+        next outage."""
+        client = _client(connected=False, last_message_age=9999.0)
+        await _sweep({1: client})
+        assert 1 in _connection_watchdog_last_attempt
+
+        client.state.connected = True
+        await _sweep({1: client})
+        assert 1 not in _connection_watchdog_last_attempt
+
+
+class TestUnreachablePrinters:
+    @pytest.mark.asyncio
+    async def test_switched_off_printer_is_not_rebuilt(self):
+        """Rebuilding a client against a host that isn't answering achieves
+        nothing and would log a warning per printer all night."""
+        client = _client(connected=False, last_message_age=9999.0)
+        assert await _sweep({1: client}, port_open=False) == 0
+        client.force_reconnect_stale_session.assert_not_called()
+
+    @pytest.mark.asyncio
+    async def test_unreachable_printer_still_takes_the_cooldown(self):
+        """Otherwise every sweep re-probes the port of every dead printer."""
+        client = _client(connected=False, last_message_age=9999.0)
+        await _sweep({1: client}, port_open=False)
+        assert 1 in _connection_watchdog_last_attempt
+
+
+class TestRetryInterval:
+    @pytest.mark.asyncio
+    async def test_does_not_rebuild_again_within_the_interval(self):
+        client = _client(connected=False, last_message_age=9999.0)
+        assert await _sweep({1: client}) == 1
+        assert await _sweep({1: client}) == 0
+        client.force_reconnect_stale_session.assert_called_once()
+
+    @pytest.mark.asyncio
+    async def test_retries_once_the_interval_has_passed(self):
+        client = _client(connected=False, last_message_age=9999.0)
+        await _sweep({1: client})
+        _connection_watchdog_last_attempt[1] -= CONNECTION_WATCHDOG_RETRY_INTERVAL + 1
+
+        assert await _sweep({1: client}) == 1
+        assert client.force_reconnect_stale_session.call_count == 2
+
+
+class TestSweepIsFaultTolerant:
+    @pytest.mark.asyncio
+    async def test_one_broken_client_does_not_stop_the_others(self):
+        """A farm sweep that aborts on the first bad client would leave every
+        printer after it unrecovered."""
+        bad = _client(connected=False, last_message_age=9999.0)
+        bad.force_reconnect_stale_session.side_effect = RuntimeError("boom")
+        good = _client(connected=False, last_message_age=9999.0)
+
+        assert await _sweep({1: bad, 2: good}) == 2
+        good.force_reconnect_stale_session.assert_called_once()

frontend/src/i18n/locales/de.ts

@@ -2843,7 +2843,7 @@ export default {
     title: 'Fehler - {{name}}',
     noErrors: 'Keine Fehler',
     viewOnWiki: 'Im Bambu Lab Wiki ansehen',
-    mqttVerifyFailedRemedy: 'Aktiviere den Entwicklermodus am Drucker (Einstellungen > Allgemein), starte den Drucker neu und starte den Auftrag dann erneut.',
+    mqttVerifyFailedRemedy: 'Aktiviere den Entwicklermodus am Drucker, starte den Drucker neu und starte den Auftrag dann erneut.',
     unknownCode: 'Unbekannter HMS-Code — Details siehe Bambu Lab Wiki.',
     clearInstructions: 'Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.',
     clearErrors: 'Fehler löschen',

frontend/src/i18n/locales/en.ts

@@ -2872,7 +2872,7 @@ export default {
     title: 'Errors - {{name}}',
     noErrors: 'No errors',
     viewOnWiki: 'View on Bambu Lab Wiki',
-    mqttVerifyFailedRemedy: 'Enable Developer Mode on the printer (Settings > General), restart the printer, then start the job again.',
+    mqttVerifyFailedRemedy: 'Enable Developer Mode on the printer, restart the printer, then start the job again.',
     unknownCode: 'Unknown HMS code — see the Bambu Lab wiki for details.',
     clearInstructions: 'Clear errors on the printer to dismiss them here.',
     clearErrors: 'Clear Errors',

frontend/src/i18n/locales/es.ts

@@ -2846,7 +2846,7 @@ export default {
     title: 'Errores - {{name}}',
     noErrors: 'No hay errores',
     viewOnWiki: 'Ver en la wiki de Bambu Lab',
-    mqttVerifyFailedRemedy: 'Activa el modo desarrollador en la impresora (Ajustes > General), reinicia la impresora y vuelve a iniciar el trabajo.',
+    mqttVerifyFailedRemedy: 'Activa el modo desarrollador en la impresora, reinicia la impresora y vuelve a iniciar el trabajo.',
     unknownCode: 'Código HMS desconocido — consulta la wiki de Bambu Lab para más detalles.',
     clearInstructions: 'Borre los errores en la impresora para descartarlos aquí.',
     clearErrors: 'Borrar errores',

frontend/src/i18n/locales/fr.ts

@@ -2832,7 +2832,7 @@ export default {
     title: 'Erreurs - {{name}}',
     noErrors: 'Aucune erreur',
     viewOnWiki: 'Voir sur le Wiki Bambu Lab',
-    mqttVerifyFailedRemedy: "Activez le mode developpeur sur l'imprimante (Parametres > General), redemarrez l'imprimante, puis relancez la tache.",
+    mqttVerifyFailedRemedy: "Activez le mode developpeur sur l'imprimante, redemarrez l'imprimante, puis relancez la tache.",
     unknownCode: 'Code HMS inconnu — consultez le wiki Bambu Lab pour plus de détails.',
     clearInstructions: 'Effacez les erreurs sur l\'imprimante pour les retirer ici.',
     clearErrors: 'Effacer les erreurs',

frontend/src/i18n/locales/it.ts

@@ -2831,7 +2831,7 @@ export default {
     title: 'Errori - {{name}}',
     noErrors: 'Nessun errore',
     viewOnWiki: 'Vedi su Bambu Lab Wiki',
-    mqttVerifyFailedRemedy: 'Attiva la modalita sviluppatore sulla stampante (Impostazioni > Generale), riavvia la stampante e avvia di nuovo il lavoro.',
+    mqttVerifyFailedRemedy: 'Attiva la modalita sviluppatore sulla stampante, riavvia la stampante e avvia di nuovo il lavoro.',
     unknownCode: 'Codice HMS sconosciuto — consulta la wiki di Bambu Lab per i dettagli.',
     clearInstructions: 'Cancella gli errori sulla stampante per rimuoverli qui.',
     clearErrors: 'Cancella errori',

frontend/src/i18n/locales/ja.ts

@@ -2843,7 +2843,7 @@ export default {
     title: 'エラー - {{name}}',
     noErrors: 'エラーなし',
     viewOnWiki: 'Bambu Lab Wikiで表示',
-    mqttVerifyFailedRemedy: 'プリンターで開発者モードを有効にし（設定 > 一般）、プリンターを再起動してから、ジョブをもう一度開始してください。',
+    mqttVerifyFailedRemedy: 'プリンターで開発者モードを有効にし、プリンターを再起動してから、ジョブをもう一度開始してください。',
     unknownCode: '不明なHMSコード — 詳細はBambu Lab Wikiを参照してください。',
     clearInstructions: 'プリンターでエラーをクリアするとここからも消えます。',
     clearErrors: 'エラーをクリア',

frontend/src/i18n/locales/ko.ts

@@ -2693,7 +2693,7 @@ export default {
     title: '오류 - {{name}}',
     noErrors: '오류 없음',
     viewOnWiki: 'Bambu Lab 위키에서 보기',
-    mqttVerifyFailedRemedy: '프린터에서 개발자 모드를 활성화하고(설정 > 일반) 프린터를 재시작한 다음 작업을 다시 시작하세요.',
+    mqttVerifyFailedRemedy: '프린터에서 개발자 모드를 활성화하고 프린터를 재시작한 다음 작업을 다시 시작하세요.',
     unknownCode: '알 수 없는 HMS 코드 — 자세한 내용은 Bambu Lab 위키를 참조하세요.',
     clearInstructions: '오류를 해제하려면 프린터에서 오류를 지우세요.',
     clearErrors: '오류 지우기',

frontend/src/i18n/locales/pt-BR.ts

@@ -2831,7 +2831,7 @@ export default {
     title: 'Erros - {{name}}',
     noErrors: 'Nenhum erro',
     viewOnWiki: 'Ver no Bambu Lab Wiki',
-    mqttVerifyFailedRemedy: 'Ative o Modo Desenvolvedor na impressora (Configuracoes > Geral), reinicie a impressora e inicie o trabalho novamente.',
+    mqttVerifyFailedRemedy: 'Ative o Modo Desenvolvedor na impressora, reinicie a impressora e inicie o trabalho novamente.',
     unknownCode: 'Código HMS desconhecido — consulte o wiki da Bambu Lab para mais detalhes.',
     clearInstructions: 'Limpe os erros na impressora para descartá-los aqui.',
     clearErrors: 'Limpar Erros',

frontend/src/i18n/locales/ru.ts

@@ -2685,7 +2685,7 @@ export default {
     title: "Ошибки — {{name}}",
     noErrors: "Ошибок нет",
     viewOnWiki: "Открыть в Bambu Lab Wiki",
-    mqttVerifyFailedRemedy: "Включите режим разработчика на принтере (Настройки > Общие), перезагрузите принтер и запустите задание снова.",
+    mqttVerifyFailedRemedy: "Включите режим разработчика на принтере, перезагрузите принтер и запустите задание снова.",
     unknownCode: "Неизвестный код HMS — подробности см. в Bambu Lab Wiki.",
     clearInstructions: "Устраните ошибки на принтере, чтобы они исчезли из этого списка.",
     clearErrors: "Очистить ошибки",

frontend/src/i18n/locales/tr.ts

@@ -2847,7 +2847,7 @@ export default {
     title: 'Hatalar - {{name}}',
     noErrors: 'Hata yok',
     viewOnWiki: 'Bambu Lab Wiki\'de görüntüle',
-    mqttVerifyFailedRemedy: 'Yazicida Gelistirici Modunu etkinlestirin (Ayarlar > Genel), yaziciyi yeniden baslatin ve isi tekrar baslatin.',
+    mqttVerifyFailedRemedy: 'Yazicida Gelistirici Modunu etkinlestirin, yaziciyi yeniden baslatin ve isi tekrar baslatin.',
     unknownCode: 'Bilinmeyen HMS kodu — ayrıntılar için Bambu Lab wiki sayfasına bakın.',
     clearInstructions: 'Buradan kapatmak için yazıcıdaki hataları temizleyin.',
     clearErrors: 'Hataları Temizle',

frontend/src/i18n/locales/uk.ts

@@ -2872,7 +2872,7 @@ export default {
     title: "Помилки - {{name}}",
     noErrors: "Помилок немає",
     viewOnWiki: "Переглянути на Bambu Lab Wiki",
-    mqttVerifyFailedRemedy: "Увімкніть режим розробника на принтері (Налаштування > Загальні), перезавантажте принтер і запустіть завдання знову.",
+    mqttVerifyFailedRemedy: "Увімкніть режим розробника на принтері, перезавантажте принтер і запустіть завдання знову.",
     unknownCode: "Невідомий код HMS — подробиці дивіться у вікі Bambu Lab.",
     clearInstructions: "Усуньте помилки на принтері, щоб вони зникли тут.",
     clearErrors: "Очистити помилки",

frontend/src/i18n/locales/zh-CN.ts

@@ -2831,7 +2831,7 @@ export default {
     title: '错误 - {{name}}',
     noErrors: '无错误',
     viewOnWiki: '在拓竹 Wiki 上查看',
-    mqttVerifyFailedRemedy: '在打印机上启用开发者模式（设置 > 通用），重启打印机，然后重新开始该任务。',
+    mqttVerifyFailedRemedy: '在打印机上启用开发者模式，重启打印机，然后重新开始该任务。',
     unknownCode: '未知 HMS 代码 — 详情请参阅拓竹 Wiki。',
     clearInstructions: '在打印机上清除错误以在此处消除它们。',
     clearErrors: '清除错误',

frontend/src/i18n/locales/zh-TW.ts

@@ -2831,7 +2831,7 @@ export default {
     title: '錯誤 - {{name}}',
     noErrors: '無錯誤',
     viewOnWiki: '在拓竹 Wiki 上檢視',
-    mqttVerifyFailedRemedy: '在印表機上啟用開發者模式（設定 > 一般），重新啟動印表機，然後重新開始該工作。',
+    mqttVerifyFailedRemedy: '在印表機上啟用開發者模式，重新啟動印表機，然後重新開始該工作。',
     unknownCode: '未知 HMS 代碼 — 詳情請參閱拓竹 Wiki。',
     clearInstructions: '在印表機上清除錯誤以在此處消除它們。',
     clearErrors: '清除錯誤',

static/index.html

@@ -26,7 +26,7 @@
 
     <!-- Splash screens for iOS -->
     <link rel="apple-touch-startup-image" href="/img/android-chrome-512x512.png" />
-    <script type="module" crossorigin src="/assets/index-I83QBJfM.js"></script>
+    <script type="module" crossorigin src="/assets/index-CrcwM7vK.js"></script>
     <link rel="stylesheet" crossorigin href="/assets/index-oReXTzKG.css">
   </head>
   <body>