Update 63: New graphics section and more firmwares.

Includes PR's #80, #81, #82, #84, #85, and #86.

FAQ.md

@@ -315,7 +315,7 @@
 ### Why isn't Mifare Classic emulation working?
 > Flipper emulates Mifare Classics according to official specification docs (at 13.56 mhz), however certain card readers operate at slightly different frequencies (such as 13.50 mhz). Since Flipper is unable to detect the frequency (like a real card does), it also can't correct for these minor errors.
 > As a result, data transmission doesn't always occur when the reader expects it, and thus emulation is imperfect.
-> There are a few theoretical ways to fix this with software, but the best option would require hardware modification.
+> There are a few theoretical ways to fix this with software, but the best option would require a new hardware revision.
 
 ### Why can't I save/emulate Mifare DESFire?
 > DESFire is a very complicated and much more secure chipset. There are no known attacks against it yet.
@@ -381,4 +381,4 @@
 
 
 ## WiFi board [🔝](#top)
-> *(WIP)*
+> *(WIP)*

Firmwares.md

@@ -14,6 +14,8 @@
         <td><a href="#official">Official</a></td>
         <td><a href="#unleashed">Unleashed</a></td>
         <td><a href="#plugins">RogueMaster</a></td>
+        <td><a href="#Xtreme">Xtreme</a></td>
+        <td><a href="#Dexv">Dexv</a></td>
         <td><a href="#v1nc">v1nc</a></td>
         <td><a href="#wetox">Wetox</a></td>
         <td><a href="#muddledbox">MuddledBox</a></td>
@@ -74,8 +76,7 @@
     <li>Built off Unleashed as the base firmware (which is a fork of Official dev firmware.)</li>
     <li>Removes Sub-GHz regional transmission restrictions after changes to <em>extend_range.txt</em> file.</li>
     <li>Allows Sub-GHz extended frequency range (i.e. restaurant pagers) through <em>extend_range.txt</em> file.</li>
-    <li>Has Sub-GHz protocols and most of the other changes taken from Unleashed FW (see <a
-            href="#unleashed">changes</a>).</li>
+    <li>Has Sub-GHz protocols and most of the other changes taken from Unleashed FW (see <a href="#unleashed">changes</a>).</li>
     <li>Adds extra custom assets <em>(Mifare classic dict, example files, etc)</em>.</li>
     <li>Includes some PRs from Official firmware that are not yet merged in Official firmware <em>(bleeding edge)</em>.
     </li>
@@ -88,6 +89,37 @@
                 href="https://github.com/RogueMaster/flipperzero-firmware-wPlugins#readme">README</a>.</li>
     </ul>
 </ul>
+<h2 id="Xtreme">
+    💋 Flipper-Xtreme
+    <kbd>
+        <a href="https://github.com/ClaraCrazy/Flipper-Xtreme/">ClaraCrazy/Flipper-Xtreme/</a>
+    </kbd>
+</h2>
+<ul>
+    <li>Built from RogueMaster (converted to fork of Official for future development).</li>
+    <li>Removes Sub-GHz regional transmission restrictions after changes to <em>extend_range.txt</em> file.</li>
+    <li>Allows Sub-GHz extended frequency range (i.e. restaurant pagers) through <em>extend_range.txt</em> file.</li>
+    <li>Has Sub-GHz protocols and most of the other changes taken from Unleashed FW (see <a href="#unleashed">changes</a>).</li>
+    <li>Adds extra custom assets <em>(Mifare classic dict, 18+ animations, example files, etc)</em>.</li>
+    <li>Includes an enhanced/improved "Dolphin Level" system similar to RogueMaster.</li>
+    <li>Includes extra apps and plugins from the general community through SD Application loader (FAP files).</li>
+    <li>Also includes a number of other small tweaks, changes, and stability fixes.</li>
+</ul>
+<h2 id="Dexv">
+    💎Dexv
+    <kbd>
+        <a href="https://github.com/DXVVAY/Dexvmaster0">DXVVAY/Dexvmaster0</a>
+    </kbd>
+</h2>
+<ul>
+    <li>Fork of <a href="#Xtreme">Clara Crazy's Xtreme FW</a> (converted to fork of Unleashed for future development).</li>
+    <li>Adds custom-themed graphics and some extra features that are not included in the Official Firmware.</li>
+    <li>Removes Sub-GHz regional transmission restrictions after changes to <em>extend_range.txt</em> file.</li>
+    <li>Allows Sub-GHz extended frequency range (i.e. restaurant pagers) through <em>extend_range.txt</em> file.</li>
+    <li>Has Sub-GHz protocols and most of the other changes taken from Unleashed FW (see <a href="#unleashed">changes</a>).</li>
+    <li>Adds extra custom assets <em>(Mifare classic dict, 18+ animations, example files, etc)</em>.</li>
+    <li>Includes extra apps and plugins from the general community through SD Application loader (FAP files).</li>
+</ul>
 <h2 id="v1nc">
     ⌨ v1nc
     <kbd>
@@ -136,4 +168,4 @@
     <li>Unleashed is more focused on core functionality, stability, and Sub-GHz protocols.</li>
     <li>RogueMaster is more focused on visual tweaks, new items, and changes (some experimental).</li>
     <li>RogueMaster is based on Unleashed, but may be less stable than Unleashed in some circumstances.</li>
-</ul>
+</ul>

README.md

@@ -76,6 +76,7 @@
 - [`USB HID Autofire` Send left-clicks as a USB HID device.](https://github.com/pbek/usb_hid_autofire)
 - [`Flipper Authenticator` Generate TOTP authentication codes.](https://github.com/akopachov/flipper-zero_authenticator/)
 - [`Unitemp` Application for reading temperature, humidity and pressure sensors using Onewire, Singlewire, I2C protocols](https://github.com/quen0n/unitemp-flipperzero)
+- [`Flipp Pomodoro` Pomodoro Timer Tool for productivity.](https://github.com/Th3Un1q3/flipp_pomodoro)
 
 ## Firmwares & Tweaks
 
@@ -86,11 +87,27 @@
 
 - [`Unleashed` Unlocked firmware with rolling codes support & community plugins, stable tweaks, and games.](https://github.com/DarkFlippers/unleashed-firmware)
 - [`RogueMaster` Fork of Unleashed firmware with custom graphics, experimental tweaks, community plugins and games.](https://github.com/RogueMaster/flipperzero-firmware-wPlugins)
+- [`Xtreme` Official fork with cleaned up codebase, more module extensions and custom assets.](https://github.com/ClaraCrazy/Flipper-Xtreme)
+- [`Dexv` Xtreme fork; The "Will it blend?" of custom firmwares.](https://github.com/DXVVAY/Dexvmaster0)
 - [`v1nc flipper zero firmware` Unleashed fork with support for different Duckyscript keyboard layouts & community plugins.](https://github.com/v1nc/flipperzero-firmware)
 - [`Wetox` Very similar to the official branch, with a few small tweaks.](https://github.com/wetox-team/flipperzero-firmware)
 - [`Muddled Forks` Less-active firmware modifications.](https://github.com/MuddledBox/flipperzero-firmware/tree/muddled_dev)
 - [`OpenHaystack BLE mod` Very old PoC that makes Flipper behave like an AirTag.](https://github.com/AlexStrNik/flipperzero-firmware)
 
+## Graphics & Animations
+- [`Talking Sasquach Animations` Literally wrote the book on making animations.](https://github.com/skizzophrenic/Talking-Sasquach)
+- [`Lab401 Animation Video` YouTube video with a step by step from Talking Sasquach.](https://www.youtube.com/watch?v=Nq5DXhOMo5s)
+- [`Kuronons Graphics` Custom animations, passport backgrounds & profile pictures.](https://github.com/Kuronons/FZ_graphics)
+- [`Flipper Zero Animation Process` Google Doc step by step from Talking Sasquach.](https://docs.google.com/document/d/e/2PACX-1vR_nZRakD6iwJVQS8Pf4y7Wm4klcucrC7EKVO8m_DQV63To7e-alqD0yaoO3sTygjcChfcRo80Hdeet/pub)
+- [`Flipper Animation Manager` Visualize and manage animations directly from your computer.](https://github.com/Ooggle/FlipperAnimationManager)
+- [`zip2Animation` Utility to assist in creating animations.](https://github.com/CharlesTheGreat77/zip2Animation)
+- [`Haseosama Animations` Great collection of custom animations.](https://github.com/Haseosama/FZ_Animations)
+- [`Animations by stopoxy` Another great custom animation collection.](https://github.com/stopoxy/FZAnimations)
+- [`Wr3nch Animations` Some custom animations and scripts.](https://github.com/wrenchathome/flip0anims)
+- [`Dexv Graphics` Custom animations and resources.](https://github.com/DXVVAY/dexv-graphics)
+- [`DoobTheGoober Animations` Custom animations from the creator of zip2Animation](https://github.com/CharlesTheGreat77/FlipperZeroAnimation)
+- [`UberGuidoZ Graphics` Brief description and links to resources, including PYX host.](https://github.com/UberGuidoZ/Flipper/tree/main/Graphics)
+
 ## Modules & Cases
 - [`FlipperZero-Hardware` 3D-Printable cases with custom iButton interface.](https://github.com/s0ko1ex/FlipperZero-Hardware)
 - [`Flipper Zero Cases` 3D-Printable case & cover models.](https://github.com/MuddledBox/FlipperZeroCases)
@@ -109,7 +126,7 @@
 - [`Soft TPU cover` Similar to the official silicone case.](https://www.printables.com/en/model/272676-soft-tpu-flipper-zero-cover)
 - [`Flipper-Boy` Flipper Zero Case with 22mm Watch Strap Adapter.](https://www.printables.com/model/304243-flipper-boy)
 - [`WiFi Devboard Pelican Case` Top case that works with the 4mm FZ Pelican case.](https://github.com/Z3BRO/Flipper-Zero-Pelican-Case-Wifi-Devboard)
-- [`RGB Backlight mod` Replace your Flipper LCD's backlight with Adafruit Neopixels.](https://github.com/Z3BRO/Flipper-Zero-RBG-Backlight)
+- [`FlipperZero RGB backlight` Replacing stock backlight with RGB](https://github.com/quen0n/flipperzero-firmware-rgb)
 
 ## Off-device & Debugging
 - [`Official Web Interface` Web interface to interact with Flipper, including Paint and SUB/IR analyzer.](https://my.flipp.dev/)
@@ -154,7 +171,7 @@
 - [`ESP32 Marauder guide video` Companion video for the above link.](https://youtu.be/_YLTpNo5xa0)
 - [`Flipper Skylanders` How to read a Skylanders figure with Flipper.](https://github.com/V0lk3n/Flipper-Skylanders)
 - [`Flipper Zero Dimensions` Basic info on screen and case dimensions.](https://github.com/UberGuidoZ/Flipper/tree/main/FlipperZero_Dimensions)
-
+- [`Application CI/CD Guide` A complete guide on how to adopt flipper application to regular API changes.](https://gist.github.com/Th3Un1q3/233fa6900d13caa95c6383e53a92bed1)
 
 <!-- DO NOT MODIFY BELOW -->