Kitchen Vent Dimmer.txt 3.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143
  1. Info: Kitchen Vent Dimmer
  2. Address: C8C8C1
  3. Rate: 1
  4. Ch: 122
  5. CRC: 2
  6. DPL: 0
  7. RETR: 0x0F
  8. Resend: 3
  9. Delay_ms: 30
  10. Payload struct: 2,1,1
  11. ROM=0x41;ROM2=0x42;WROM=0x81;WROM2=0x82;RAM=0x51;RAM2=0x52;WRAM=0x91;WRAM2=0x92;PGM=0x61;SET=0xC0
  12. R default: ,,ROM
  13. W default: n,,WROM
  14. Write start: 0,0,0x2F
  15. R: ID*=,0,0x65
  16. R: CO2 level*2[3]=i:4,,ROM2
  17. W: CO2 level*2=,i:4,WROM2
  18. R: Fan speeds=25
  19. W: Fan speeds=,25
  20. R: FanSpeed[3]=i:19
  21. W: FanSpeed=,i:19
  22. R: FanCook speeds=26
  23. W: FanCook speeds=,26
  24. R: FanCookSpeed[3]=i:22
  25. W: FanCookSpeed=,i:22
  26. R: FanOnTime=10
  27. W: FanOnTime=,10
  28. R: FanOffTime=11
  29. W: FanOffTime=,11
  30. R: FanCookOnTime=12
  31. W: FanCookOnTime=,12
  32. R: FanCookOffTime=13
  33. W: FanCookOffTime=,13
  34. R: FanSleep=14
  35. W: FanSleep=,14
  36. R: FanCookSleep=15
  37. W: FanCookSleep=,15
  38. R: SpeedInitIdx=16
  39. W: SpeedInitIdx=,16
  40. R: SpeedKeyIdx=17
  41. W: SpeedKeyIdx=,17
  42. R: OutSpeedMax=18
  43. W: OutSpeedMax=,18
  44. R: ZeroCrossLag,us*2=27,,ROM2
  45. W: ZeroCrossLag,us=,27,WROM2
  46. R: SSR_PulseWidth,us*2=29,,ROM2
  47. W: SSR_PulseWidth,us=,29,WROM2
  48. R: PauseSetByCO2,min=31
  49. W: PauseSetByCO2,min=,31
  50. R: IRRemotes=32
  51. W: IRRemotes=,32
  52. R: IRRemotesHash*2[70]=i:33,,ROM2#
  53. W: IRRemotesHash*2=,i:33,WROM2
  54. R: Flags=1#
  55. W: Flags=,1
  56. R: RxAddr=2#
  57. W: RxAddr=,2
  58. R: Ch=3
  59. W: Ch=,3
  60. R: OSCCAL_EMEM=0
  61. R: _OSCCAL=0x51,,RAM
  62. W: _OSCCAL=,0x51,,WRAM
  63. R: _PORTA=0x39,,RAM
  64. W: _PORTA=,0x3B,,WRAM
  65. R: _PORTB=0x36,,RAM
  66. W: _PORTB=,0x38,WRAM
  67. R: _Fanspeed=0x75,,RAM
  68. R: _FanOn=0x76,,RAM
  69. R: _FanOnNext=0x74,,RAM
  70. R: _FanOnNextCnt=0x72,,RAM
  71. R: _FanOnLast=0x73,,RAM
  72. R: _IRHashLast*2=0x7C,,RAM2#
  73. R: _SleepTimer=0x84,,RAM
  74. R: _OutSpeedMax=0x87,,RAM
  75. W: _OutSpeedMax=,0x87,WRAM
  76. R: _LED_Warning=0x6B,,RAM
  77. W: _LED_Warning=,0x6B,WRAM
  78. R: _ZeroCrossDelay*2=0x8E,,RAM2
  79. W: _ZeroCrossDelay*2=,0x8E,WRAM2
  80. R: _PulseDelayAfterZero*2=0x9A,,RAM2
  81. W: _PulseDelayAfterZero*2=,0x9A,WRAM2
  82. R: _PulseWidth*2=0x8C,,RAM
  83. W: _PulseWidth*2=,0x8C,WRAM2
  84. W: Reset=0xEEEE,14,SET
  85. S: Lamp=,0,SET
  86. S: Fan=,1,SET
  87. S: FanSpdUp=,2,SET
  88. S: FanSpdDn=,3,SET
  89. S: FanSpdSave=,4,SET
  90. S: SetupIR=,5,SET
  91. SBatch: Fan Cooker Max: Fan=6
  92. SBatch: Fan Cooker Min: Fan=4
  93. SBatch: Fan Max: Fan=3
  94. SBatch: Fan Min: Fan=1
  95. SBatch: Fan Off: Fan=0
  96. SBatch: Lamp On: Lamp=1
  97. SBatch: Lamp Off: Lamp=0
  98. SBatch: Fan Up: FanSpdUp=0
  99. SBatch: Fan Down: FanSpdDn=0
  100. SBatch: Fan SAVE: FanSpdSave=0;
  101. SBatch: Add new IR: SetupIR=1
  102. RBatch: Work: ID;CO2 level;FanCookSpeed;FanCookOnTime;FanCookOffTime;FanCookSleep;FanSpeed;FanOnTime;FanOffTime;FanSleep
  103. RBatch: Hardware: ID;RxAddr;Ch;SpeedInitIdx;Flags;OutSpeedMax;IRRemotes;ZeroCrossLag,us;SSR_PulseWidth,us;OSCCAL_EMEM
  104. RBatch: All: ID;CO2 level;FanCookSpeed;FanCookOnTime;FanCookOffTime;FanCookSleep;FanSpeed;FanOnTime;FanOffTime;FanSleep;RxAddr;Ch;SpeedInitIdx;Flags;OutSpeedMax;IRRemotes;IRRemotesHash
  105. WBatch: Init(Cook2spd,Lamp-F2.2): RxAddr=0xC1;Ch=122;CO2 level={870,930,1000};Fan speeds=3;FanSpeed={14,15,16};FanCook speeds=3;FanCookSpeed={15,16,32};FanSleep=20;FanCookSleep=6;FanOnTime=150;FanCookOnTime=0;FanOffTime=100;FanCookOffTime=0;SpeedInitIdx=0;SpeedKeyIdx=6;Flags=0x0D;OutSpeedMax=16;ZeroCrossLag,us=200;SSR_PulseWidth,us=9999
  106. WBatch: IRRemotes clear: IRRemotes=0
  107. WBatch: IRRemotes 1 kitchen: IRRemotes=1;IRRemotesHash={0x6DA5,0xFCA5,0x7CA5,0xB425,0x3425,0x1625,0x8525}
  108. WBatch: Fans Speeds: Fan speeds=3;FanSpeed={14,15,16};FanCook speeds=3;FanCookSpeed={14,16,32}
  109. WBatch: LED Warning: _LED Warning=0x10
  110. WBatch: OSCCAL: _OSCCAL=146
  111. WBatch: CO2 Level: CO2 level={750,850,1000}
  112. WBatch: Zero cross EEPROM: ZeroCrossLag,us=200;SSR_PulseWidth,us=200
  113. WBatch: Zero cross RAM: _ZeroCrossDelay=1225;_PulseDelayAfterZero=0001;_PulseWidth=1249
  114. WBatch: Reset: Reset