README.md 989 B
Flipper Zero - Camera Suite
Software to run an ESP32-CAM module on your Flipper Zero device.
Full setup, wiring guide, etc. in the main project README here: https://github.com/CodyTolene/Flipper-Zero-Camera-Suite
Firmware is needed for the ESP32-CAM module, see here for more information: https://github.com/CodyTolene/Flipper-Zero-Camera-Suite#firmware-installation
Software Guide
Button mappings:
Up = Contrast Up
Down = Contrast Down
Left = Toggle invert.
Right = Toggle dithering on/off.
Center = Cycle Floyd–Steinberg/Jarvis-Judice-Ninke/Stucki dithering types.
Back = Go back.
Settings:
Orientation = Rotate the camera image 90 degrees counter-clockwise starting at zero by default (0, 90, 180, 270). This is useful if you have your camera module mounted in a different orientation than the default.
Haptic FX = Toggle haptic feedback on/off.
Sound FX = Toggle sound effects on/off.
LED FX = Toggle LED effects on/off.