Etusivu Tutki Apua
Kirjaudu sisään
torambo.com
/
Momentum-Apps
2
0
Fork 0
Tiedostot Ongelmat 0 Pull-pyynnöt 0 Wiki
Haara: dev
Haarat Tagit
Momentum-Apps
/
malveke_gb_live_camera
WillyJL 1864a26b28 Better subtree scripts (#25) 1 vuosi sitten
..
.flipcorg b0451b137c Add malveke_gb_live_camera from https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero 1 vuosi sitten
docs b0451b137c Add malveke_gb_live_camera from https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero 1 vuosi sitten
icons b0451b137c Add malveke_gb_live_camera from https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero 1 vuosi sitten
.clang-format b0451b137c Add malveke_gb_live_camera from https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero 1 vuosi sitten
.gitsubtree 1864a26b28 Better subtree scripts (#25) 1 vuosi sitten
LICENSE b0451b137c Add malveke_gb_live_camera from https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero 1 vuosi sitten
README.md b0451b137c Add malveke_gb_live_camera from https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero 1 vuosi sitten
README_catalog.md b0451b137c Add malveke_gb_live_camera from https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero 1 vuosi sitten
application.fam 843ad7dc60 Format 1 vuosi sitten
gb_live_camera.c 01d5618966 Format and remove view_dispatcher_enable_queue() 1 vuosi sitten
gb_live_camera.h b0451b137c Add malveke_gb_live_camera from https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero 1 vuosi sitten

README.md

GAME BOY Live Camera MALVEKE

MALVEKE Prototype V2.3
https://github.com/EstebanFuentealba/MALVEKE-Flipper-Zero/assets/442927/8c11cb8a-2a05-47e2-a0e0-1d3a1fe386

Introduction

**Official** | **Unleashed** | **RogueMaster** | **Xtreme** :- | :- | :- | :- [![FlipC.org](https://flipc.org/EstebanFuentealba/MALVEKE-Flipper-Zero/badge?branch=main&root=flipper_companion_apps%2Fapplications%2Fexternal%2Fmalveke_gb_live_camera&firmware=official)](https://flipc.org/EstebanFuentealba/MALVEKE-Flipper-Zero?branch=main&root=flipper_companion_apps%2Fapplications%2Fexternal%2Fmalveke_gb_live_camera&firmware=official)|[![FlipC.org](https://flipc.org/EstebanFuentealba/MALVEKE-Flipper-Zero/badge?branch=main&root=flipper_companion_apps%2Fapplications%2Fexternal%2Fmalveke_gb_live_camera&firmware=unleashed)](https://flipc.org/EstebanFuentealba/MALVEKE-Flipper-Zero?branch=main&root=flipper_companion_apps%2Fapplications%2Fexternal%2Fmalveke_gb_live_camera&firmware=unleashed)|[![FlipC.org](https://flipc.org/EstebanFuentealba/MALVEKE-Flipper-Zero/badge?branch=main&root=flipper_companion_apps%2Fapplications%2Fexternal%2Fmalveke_gb_live_camera&firmware=roguemaster)](https://flipc.org/EstebanFuentealba/MALVEKE-Flipper-Zero?branch=main&root=flipper_companion_apps%2Fapplications%2Fexternal%2Fmalveke_gb_live_camera&firmware=roguemaster)|[![FlipC.org](https://flipc.org/EstebanFuentealba/MALVEKE-Flipper-Zero/badge?branch=main&root=flipper_companion_apps%2Fapplications%2Fexternal%2Fmalveke_gb_live_camera&firmware=xtreme)](https://flipc.org/EstebanFuentealba/MALVEKE-Flipper-Zero?branch=main&root=flipper_companion_apps%2Fapplications%2Fexternal%2Fmalveke_gb_live_camera&firmware=xtreme)

I sell on Tindie

Installation Directions

This project is intended to be overlayed on top of an existing firmware repo, in my case the Release 0.79.1 version.

  • Clone the Flipper Zero firmware repository. Refer to this tutorial for updating the firmware.
  • Copy the "malveke_gb_live_camera" folder into the /applications_user/malveke_gb_live_camera folder in your firmware.

  • Run the command ufbt launch to run it on your Flipper Zero.

    ./ufbt launch

  • NOTE: If you only want to generate the fap file, you must run the following command.

    ./ufbt

And use qFlipper to copy the generated malveke_gb_live_camera.fap file to the SD Card/apps/GPIO folder.


Instructions for use.

These instructions assume that you are starting at the Flipper Zero desktop. Otherwise, press the Back button until you are at the desktop.

  • Press the OK button on the Flipper to open the main menu.
  • Choose Applications from the menu.
  • Choose GPIO from the submenu.
  • Choose GAME BOY Live Camera MALVEKE

  • The Flipper Zero will show the loading screen of the application.



  • If the MALVEKE board and the GAME BOY Camera cartridge are connected, an image will be displayed.



  • Press the LEFT/RIGHT buttons to change the exposure value.

  • Press the OK button to take a picture. The image will be saved in the SD Card/apps_data/malveke/photos folder.

TODO

  • Add automatic exposure calculation.
  • Refactor Code

Acknowledgements



From Talcahuano 🇨🇱 with ❤