Kitchen Vent.txt 2.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129
  1. Info: Kitchen Vent (FanControl)
  2. Address: C8C8C1
  3. Rate: 1
  4. Ch: 122
  5. CRC: 2
  6. DPL: 0
  7. RETR: 0x0F
  8. Resend: 3
  9. Delay_ms: 30
  10. Payload struct: 2,1,1
  11. EEPROM=0; RAM=1; PROGMEM=2; ID=3; RESET=4; WRAM=0x89; R1=0xC1; R2=0xC2; W1=0x81; W2=0x82
  12. R default: ,EEPROM,R1
  13. W default: n,,W1
  14. Write start: 0,0,0x8F
  15. R: ID*=,ID
  16. R: CO2 level*2[3]=i:4,,R2
  17. W: CO2 level*2=,i:4,W2
  18. R: Fan speeds=25
  19. W: Fan speeds=,25
  20. R: FanSpeed[3]=i:19
  21. W: FanSpeed=,i:19
  22. R: FanCook speeds=26
  23. W: FanCook speeds=,26
  24. R: FanCookSpeed[3]=i:22
  25. W: FanCookSpeed=,i:22
  26. R: FanOnTime=10
  27. W: FanOnTime=,10
  28. R: FanOffTime=11
  29. W: FanOffTime=,11
  30. R: FanCookOnTime=12
  31. W: FanCookOnTime=,12
  32. R: FanCookOffTime=13
  33. W: FanCookOffTime=,13
  34. R: FanSleep=14
  35. W: FanSleep=,14
  36. R: FanCookSleep=15
  37. W: FanCookSleep=,15
  38. R: SpeedInitIdx=16
  39. W: SpeedInitIdx=,16
  40. R: SpeedKeyIdx=17
  41. W: SpeedKeyIdx=,17
  42. R: IRRemotes=32
  43. W: IRRemotes=,32
  44. R: IRRemotesHash*2[70]=i:33,,R2#
  45. W: IRRemotesHash*2=,i:33,W2
  46. R: OutPeriod=18
  47. W: OutPeriod=,18
  48. R: Flags=1#
  49. W: Flags=,1
  50. R: RxAddr=2#
  51. W: RxAddr=,2
  52. R: Ch=3
  53. W: Ch=,3
  54. R: OSCCAL_EMEM=0
  55. R: _OSCCAL=0x51,RAM
  56. W: _OSCCAL=,0x51,WRAM
  57. R: _PORTA=0x39,RAM
  58. W: _PORTA=,0x3B,WRAM
  59. R: _PORTB=0x36,RAM
  60. W: _PORTB=,0x38,WRAM
  61. R: _OutPeriod=0x8B,RAM
  62. W: _OutPeriod=,0x8B,WRAM
  63. R: _Fanspeed=0x74,RAM
  64. R: _FanOn=0x75,RAM
  65. R: _FanOnNext=0x73,RAM
  66. R: _FanOnNextCnt=0x71,RAM
  67. R: _FanOnLast=0x72,RAM
  68. R: _IRHashLast*2=0x79,RAM,R2#
  69. R: _LED Warning=0x6B,RAM
  70. W: _LED Warning=,0x6B,WRAM
  71. W: Reset=,RESET,0xC1
  72. S: Lamp=,0,0x40
  73. S: Fan=,1,0x40
  74. S: FanSpdUp=,2,0x40
  75. S: FanSpdDn=,3,0x40
  76. S: FanSpdSave=,4,0x40
  77. S: SetupIR=,5,0x40
  78. SBatch: Fan Cooker On: Fan=6
  79. SBatch: Fan On: Fan=3
  80. SBatch: Fan Off: Fan=0
  81. SBatch: Lamp On: Lamp=1
  82. SBatch: Lamp Off: Lamp=0
  83. SBatch: Fan Up: FanSpdUp=0
  84. SBatch: Fan Down: FanSpdDn=0
  85. SBatch: Fan SAVE: FanSpdSave=0;
  86. SBatch: Add new IR: SetupIR=1
  87. RBatch: Work: ID;CO2 level;FanCookSpeed;FanCookOnTime;FanCookOffTime;FanCookSleep;FanSpeed;FanOnTime;FanOffTime;FanSleep
  88. RBatch: Hardware: ID;RxAddr;Ch;SpeedInitIdx;Flags;OutPeriod;IRRemotes;OSCCAL_EMEM
  89. RBatch: All: ID;CO2 level;FanCookSpeed;FanCookOnTime;FanCookOffTime;FanCookSleep;FanSpeed;FanOnTime;FanOffTime;FanSleep;RxAddr;Ch;SpeedInitIdx;Flags;OutPeriod;IRRemotes;IRRemotesHash
  90. WBatch: Init(Cook2spd,Lamp-F2.2): RxAddr=0xC1;Ch=122;CO2 level={950,1050,1200};Fan speeds=1;FanSpeed={1,1,1};FanCook speeds=2;FanCookSpeed={1,2,2};FanSleep=20;FanCookSleep=6;FanOnTime=150;FanCookOnTime=0;FanOffTime=100;FanCookOffTime=0;SpeedInitIdx=0;SpeedKeyIdx=6;Flags=0x0D;OutPeriod=1
  91. WBatch: IRRemotes clear: IRRemotes=0
  92. WBatch: IRRemotes 1 kitchen: IRRemotes=1;IRRemotesHash={0x6DA5,0xFCA5,0x7CA5,0xB425,0x3425,0x1625,0x8525}
  93. WBatch: Fans Speeds: Fan speeds=1;FanSpeed={1,1,1};FanCook speeds=2;FanCookSpeed={1,2,2}
  94. WBatch: LED Warning: _LED Warning=0x10
  95. WBatch: PORTA: _PORTA=0x0C
  96. WBatch: PORTB: _PORTB=0xC
  97. WBatch: OutPeriod: _OutPeriod=1
  98. WBatch: OSCCAL: _OSCCAL=146
  99. WBatch: CO2 Level: CO2 level={750,850,1000}
  100. WBatch: Reset: Reset