Momentum-Apps/lib/free-dap/platform/same70/include/instance/tc0.h

/**
 * \file
 *
 * Copyright (c) 2015-2018 Microchip Technology Inc. and its subsidiaries.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Subject to your compliance with these terms, you may use Microchip
 * software and any derivatives exclusively with Microchip products.
 * It is your responsibility to comply with third party license terms applicable
 * to your use of third party software (including open source software) that
 * may accompany Microchip software.
 *
 * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
 * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
 * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
 * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
 * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
 * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
 * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
 * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
 * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
 * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
 * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="https://www.microchip.com/support/">Microchip Support</a>
 */

#ifndef _SAME70_TC0_INSTANCE_
#define _SAME70_TC0_INSTANCE_

/* ========== Register definition for TC0 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
  #define REG_TC0_CCR0                   (0x4000C000U) /**< \brief (TC0) Channel Control Register (channel = 0) */
  #define REG_TC0_CMR0                   (0x4000C004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */
  #define REG_TC0_SMMR0                  (0x4000C008U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 0) */
  #define REG_TC0_RAB0                   (0x4000C00CU) /**< \brief (TC0) Register AB (channel = 0) */
  #define REG_TC0_CV0                    (0x4000C010U) /**< \brief (TC0) Counter Value (channel = 0) */
  #define REG_TC0_RA0                    (0x4000C014U) /**< \brief (TC0) Register A (channel = 0) */
  #define REG_TC0_RB0                    (0x4000C018U) /**< \brief (TC0) Register B (channel = 0) */
  #define REG_TC0_RC0                    (0x4000C01CU) /**< \brief (TC0) Register C (channel = 0) */
  #define REG_TC0_SR0                    (0x4000C020U) /**< \brief (TC0) Status Register (channel = 0) */
  #define REG_TC0_IER0                   (0x4000C024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */
  #define REG_TC0_IDR0                   (0x4000C028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */
  #define REG_TC0_IMR0                   (0x4000C02CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */
  #define REG_TC0_EMR0                   (0x4000C030U) /**< \brief (TC0) Extended Mode Register (channel = 0) */
  #define REG_TC0_CCR1                   (0x4000C040U) /**< \brief (TC0) Channel Control Register (channel = 1) */
  #define REG_TC0_CMR1                   (0x4000C044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */
  #define REG_TC0_SMMR1                  (0x4000C048U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 1) */
  #define REG_TC0_RAB1                   (0x4000C04CU) /**< \brief (TC0) Register AB (channel = 1) */
  #define REG_TC0_CV1                    (0x4000C050U) /**< \brief (TC0) Counter Value (channel = 1) */
  #define REG_TC0_RA1                    (0x4000C054U) /**< \brief (TC0) Register A (channel = 1) */
  #define REG_TC0_RB1                    (0x4000C058U) /**< \brief (TC0) Register B (channel = 1) */
  #define REG_TC0_RC1                    (0x4000C05CU) /**< \brief (TC0) Register C (channel = 1) */
  #define REG_TC0_SR1                    (0x4000C060U) /**< \brief (TC0) Status Register (channel = 1) */
  #define REG_TC0_IER1                   (0x4000C064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */
  #define REG_TC0_IDR1                   (0x4000C068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */
  #define REG_TC0_IMR1                   (0x4000C06CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */
  #define REG_TC0_EMR1                   (0x4000C070U) /**< \brief (TC0) Extended Mode Register (channel = 1) */
  #define REG_TC0_CCR2                   (0x4000C080U) /**< \brief (TC0) Channel Control Register (channel = 2) */
  #define REG_TC0_CMR2                   (0x4000C084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */
  #define REG_TC0_SMMR2                  (0x4000C088U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 2) */
  #define REG_TC0_RAB2                   (0x4000C08CU) /**< \brief (TC0) Register AB (channel = 2) */
  #define REG_TC0_CV2                    (0x4000C090U) /**< \brief (TC0) Counter Value (channel = 2) */
  #define REG_TC0_RA2                    (0x4000C094U) /**< \brief (TC0) Register A (channel = 2) */
  #define REG_TC0_RB2                    (0x4000C098U) /**< \brief (TC0) Register B (channel = 2) */
  #define REG_TC0_RC2                    (0x4000C09CU) /**< \brief (TC0) Register C (channel = 2) */
  #define REG_TC0_SR2                    (0x4000C0A0U) /**< \brief (TC0) Status Register (channel = 2) */
  #define REG_TC0_IER2                   (0x4000C0A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */
  #define REG_TC0_IDR2                   (0x4000C0A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */
  #define REG_TC0_IMR2                   (0x4000C0ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */
  #define REG_TC0_EMR2                   (0x4000C0B0U) /**< \brief (TC0) Extended Mode Register (channel = 2) */
  #define REG_TC0_BCR                    (0x4000C0C0U) /**< \brief (TC0) Block Control Register */
  #define REG_TC0_BMR                    (0x4000C0C4U) /**< \brief (TC0) Block Mode Register */
  #define REG_TC0_QIER                   (0x4000C0C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */
  #define REG_TC0_QIDR                   (0x4000C0CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */
  #define REG_TC0_QIMR                   (0x4000C0D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */
  #define REG_TC0_QISR                   (0x4000C0D4U) /**< \brief (TC0) QDEC Interrupt Status Register */
  #define REG_TC0_FMR                    (0x4000C0D8U) /**< \brief (TC0) Fault Mode Register */
  #define REG_TC0_WPMR                   (0x4000C0E4U) /**< \brief (TC0) Write Protection Mode Register */
  #define REG_TC0_VER                    (0x4000C0FCU) /**< \brief (TC0) Version Register */
#else
  #define REG_TC0_CCR0  (*(__O  uint32_t*)0x4000C000U) /**< \brief (TC0) Channel Control Register (channel = 0) */
  #define REG_TC0_CMR0  (*(__IO uint32_t*)0x4000C004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */
  #define REG_TC0_SMMR0 (*(__IO uint32_t*)0x4000C008U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 0) */
  #define REG_TC0_RAB0  (*(__I  uint32_t*)0x4000C00CU) /**< \brief (TC0) Register AB (channel = 0) */
  #define REG_TC0_CV0   (*(__I  uint32_t*)0x4000C010U) /**< \brief (TC0) Counter Value (channel = 0) */
  #define REG_TC0_RA0   (*(__IO uint32_t*)0x4000C014U) /**< \brief (TC0) Register A (channel = 0) */
  #define REG_TC0_RB0   (*(__IO uint32_t*)0x4000C018U) /**< \brief (TC0) Register B (channel = 0) */
  #define REG_TC0_RC0   (*(__IO uint32_t*)0x4000C01CU) /**< \brief (TC0) Register C (channel = 0) */
  #define REG_TC0_SR0   (*(__I  uint32_t*)0x4000C020U) /**< \brief (TC0) Status Register (channel = 0) */
  #define REG_TC0_IER0  (*(__O  uint32_t*)0x4000C024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */
  #define REG_TC0_IDR0  (*(__O  uint32_t*)0x4000C028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */
  #define REG_TC0_IMR0  (*(__I  uint32_t*)0x4000C02CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */
  #define REG_TC0_EMR0  (*(__IO uint32_t*)0x4000C030U) /**< \brief (TC0) Extended Mode Register (channel = 0) */
  #define REG_TC0_CCR1  (*(__O  uint32_t*)0x4000C040U) /**< \brief (TC0) Channel Control Register (channel = 1) */
  #define REG_TC0_CMR1  (*(__IO uint32_t*)0x4000C044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */
  #define REG_TC0_SMMR1 (*(__IO uint32_t*)0x4000C048U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 1) */
  #define REG_TC0_RAB1  (*(__I  uint32_t*)0x4000C04CU) /**< \brief (TC0) Register AB (channel = 1) */
  #define REG_TC0_CV1   (*(__I  uint32_t*)0x4000C050U) /**< \brief (TC0) Counter Value (channel = 1) */
  #define REG_TC0_RA1   (*(__IO uint32_t*)0x4000C054U) /**< \brief (TC0) Register A (channel = 1) */
  #define REG_TC0_RB1   (*(__IO uint32_t*)0x4000C058U) /**< \brief (TC0) Register B (channel = 1) */
  #define REG_TC0_RC1   (*(__IO uint32_t*)0x4000C05CU) /**< \brief (TC0) Register C (channel = 1) */
  #define REG_TC0_SR1   (*(__I  uint32_t*)0x4000C060U) /**< \brief (TC0) Status Register (channel = 1) */
  #define REG_TC0_IER1  (*(__O  uint32_t*)0x4000C064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */
  #define REG_TC0_IDR1  (*(__O  uint32_t*)0x4000C068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */
  #define REG_TC0_IMR1  (*(__I  uint32_t*)0x4000C06CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */
  #define REG_TC0_EMR1  (*(__IO uint32_t*)0x4000C070U) /**< \brief (TC0) Extended Mode Register (channel = 1) */
  #define REG_TC0_CCR2  (*(__O  uint32_t*)0x4000C080U) /**< \brief (TC0) Channel Control Register (channel = 2) */
  #define REG_TC0_CMR2  (*(__IO uint32_t*)0x4000C084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */
  #define REG_TC0_SMMR2 (*(__IO uint32_t*)0x4000C088U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 2) */
  #define REG_TC0_RAB2  (*(__I  uint32_t*)0x4000C08CU) /**< \brief (TC0) Register AB (channel = 2) */
  #define REG_TC0_CV2   (*(__I  uint32_t*)0x4000C090U) /**< \brief (TC0) Counter Value (channel = 2) */
  #define REG_TC0_RA2   (*(__IO uint32_t*)0x4000C094U) /**< \brief (TC0) Register A (channel = 2) */
  #define REG_TC0_RB2   (*(__IO uint32_t*)0x4000C098U) /**< \brief (TC0) Register B (channel = 2) */
  #define REG_TC0_RC2   (*(__IO uint32_t*)0x4000C09CU) /**< \brief (TC0) Register C (channel = 2) */
  #define REG_TC0_SR2   (*(__I  uint32_t*)0x4000C0A0U) /**< \brief (TC0) Status Register (channel = 2) */
  #define REG_TC0_IER2  (*(__O  uint32_t*)0x4000C0A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */
  #define REG_TC0_IDR2  (*(__O  uint32_t*)0x4000C0A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */
  #define REG_TC0_IMR2  (*(__I  uint32_t*)0x4000C0ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */
  #define REG_TC0_EMR2  (*(__IO uint32_t*)0x4000C0B0U) /**< \brief (TC0) Extended Mode Register (channel = 2) */
  #define REG_TC0_BCR   (*(__O  uint32_t*)0x4000C0C0U) /**< \brief (TC0) Block Control Register */
  #define REG_TC0_BMR   (*(__IO uint32_t*)0x4000C0C4U) /**< \brief (TC0) Block Mode Register */
  #define REG_TC0_QIER  (*(__O  uint32_t*)0x4000C0C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */
  #define REG_TC0_QIDR  (*(__O  uint32_t*)0x4000C0CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */
  #define REG_TC0_QIMR  (*(__I  uint32_t*)0x4000C0D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */
  #define REG_TC0_QISR  (*(__I  uint32_t*)0x4000C0D4U) /**< \brief (TC0) QDEC Interrupt Status Register */
  #define REG_TC0_FMR   (*(__IO uint32_t*)0x4000C0D8U) /**< \brief (TC0) Fault Mode Register */
  #define REG_TC0_WPMR  (*(__IO uint32_t*)0x4000C0E4U) /**< \brief (TC0) Write Protection Mode Register */
  #define REG_TC0_VER   (*(__I  uint32_t*)0x4000C0FCU) /**< \brief (TC0) Version Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#endif /* _SAME70_TC0_INSTANCE_ */