torambo.com
/
Momentum-Apps


			
				
					
						
						
							123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081
							/**
 * \file
 *
 * \brief Instance description for EIC
 *
 * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */

#ifndef _SAMD21_EIC_INSTANCE_
#define _SAMD21_EIC_INSTANCE_

/* ========== Register definition for EIC peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_EIC_CTRL               (0x40001800U) /**< \brief (EIC) Control */
#define REG_EIC_STATUS             (0x40001801U) /**< \brief (EIC) Status */
#define REG_EIC_NMICTRL            (0x40001802U) /**< \brief (EIC) Non-Maskable Interrupt Control */
#define REG_EIC_NMIFLAG            (0x40001803U) /**< \brief (EIC) Non-Maskable Interrupt Flag Status and Clear */
#define REG_EIC_EVCTRL             (0x40001804U) /**< \brief (EIC) Event Control */
#define REG_EIC_INTENCLR           (0x40001808U) /**< \brief (EIC) Interrupt Enable Clear */
#define REG_EIC_INTENSET           (0x4000180CU) /**< \brief (EIC) Interrupt Enable Set */
#define REG_EIC_INTFLAG            (0x40001810U) /**< \brief (EIC) Interrupt Flag Status and Clear */
#define REG_EIC_WAKEUP             (0x40001814U) /**< \brief (EIC) Wake-Up Enable */
#define REG_EIC_CONFIG0            (0x40001818U) /**< \brief (EIC) Configuration 0 */
#define REG_EIC_CONFIG1            (0x4000181CU) /**< \brief (EIC) Configuration 1 */
#else
#define REG_EIC_CTRL               (*(RwReg8 *)0x40001800U) /**< \brief (EIC) Control */
#define REG_EIC_STATUS             (*(RoReg8 *)0x40001801U) /**< \brief (EIC) Status */
#define REG_EIC_NMICTRL            (*(RwReg8 *)0x40001802U) /**< \brief (EIC) Non-Maskable Interrupt Control */
#define REG_EIC_NMIFLAG            (*(RwReg8 *)0x40001803U) /**< \brief (EIC) Non-Maskable Interrupt Flag Status and Clear */
#define REG_EIC_EVCTRL             (*(RwReg  *)0x40001804U) /**< \brief (EIC) Event Control */
#define REG_EIC_INTENCLR           (*(RwReg  *)0x40001808U) /**< \brief (EIC) Interrupt Enable Clear */
#define REG_EIC_INTENSET           (*(RwReg  *)0x4000180CU) /**< \brief (EIC) Interrupt Enable Set */
#define REG_EIC_INTFLAG            (*(RwReg  *)0x40001810U) /**< \brief (EIC) Interrupt Flag Status and Clear */
#define REG_EIC_WAKEUP             (*(RwReg  *)0x40001814U) /**< \brief (EIC) Wake-Up Enable */
#define REG_EIC_CONFIG0            (*(RwReg  *)0x40001818U) /**< \brief (EIC) Configuration 0 */
#define REG_EIC_CONFIG1            (*(RwReg  *)0x4000181CU) /**< \brief (EIC) Configuration 1 */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

/* ========== Instance parameters for EIC peripheral ========== */
#define EIC_CONFIG_NUM              2        // Number of CONFIG registers
#define EIC_GCLK_ID                 5        // Index of Generic Clock

#endif /* _SAMD21_EIC_INSTANCE_ */