MX
99f6bc25be
Workaround for furi_hal_gpio_add_int_callback conflict with expansion
|
il y a 1 an | |
|---|---|---|
| .. | ||
| LICENSE | il y a 2 ans | |
| README.md | il y a 2 ans | |
| application.fam | il y a 2 ans | |
| stepcounter.c | il y a 1 an | |
| steps.png | il y a 2 ans | |
README.md
WIP-flipperzero-StepCounter-fap
This is a simple StepCounter/Pedometer for FlipperZero using a Memsic2125 module.
Thanks to @jamisonderek for the tutorial on how to implement Memsic2125 module on Flipper Zero, and for the support.
Links
| Mx2125 | Name | Purpose | Flipper |
|---|---|---|---|
| Pin 1 | Tout | Temperature Out | not connected |
| Pin 2 | Yout | Y-axis PWM Out (100Hz, duty cycle = value) | C0 |
| Pin 3 | GND | Ground | GND |
| Pin 4 | GND | Ground | GND |
| Pin 5 | Xout | X-axis PWM Out (100Hz, duty cycle = value) | C1 |
| Pin 6 | Vdd | Drain voltage (3.3V to 5V DC) | 3v3 |
Screenshots
