Ana Sayfa Keşfet Yardım
Giriş Yap
torambo.com
/
Momentum-Apps
2
0
Çatalla 0
Dosyalar Sorunlar 0 Değişiklik İstekleri 0 Wiki
Ağaç: 5db2ca1531
Dallar Biçim İmleri
Momentum-Apps
/
gps_nmea
Willy-JL 5563d8474f Merge gps_nmea from https://github.com/ezod/flipperzero-gps 11 ay önce
..
.github 5563d8474f Merge gps_nmea from https://github.com/ezod/flipperzero-gps 11 ay önce
img ddca525b83 Add gps_nmea from https://github.com/xMasterX/all-the-plugins 2 yıl önce
lib df82b07e5c Keep subtree's submodules locked to parent's defined commit 1 yıl önce
.gitignore 27d4d8c1d8 Fix merge 2 yıl önce
.gitsubtree 77f083e3dc Merge gps_nmea from https://github.com/xMasterX/all-the-plugins 1 yıl önce
LICENSE ddca525b83 Add gps_nmea from https://github.com/xMasterX/all-the-plugins 2 yıl önce
README.md 5563d8474f Merge gps_nmea from https://github.com/ezod/flipperzero-gps 11 ay önce
application.fam 324384f292 Merge gps_nmea from https://github.com/xMasterX/all-the-plugins 1 yıl önce
constants.h ddca525b83 Add gps_nmea from https://github.com/xMasterX/all-the-plugins 2 yıl önce
gps.c a25ff33747 Merge gps_nmea from https://github.com/xMasterX/all-the-plugins 1 yıl önce
gps_10px.png ddca525b83 Add gps_nmea from https://github.com/xMasterX/all-the-plugins 2 yıl önce
gps_uart.c ad684b5833 Merge gps_nmea from https://github.com/ezod/flipperzero-gps 1 yıl önce
gps_uart.h fe2077c82e New formatting 1 yıl önce
ui.png f454caff66 Merge gps_nmea from https://github.com/ezod/flipperzero-gps 2 yıl önce
wiring.png f454caff66 Merge gps_nmea from https://github.com/ezod/flipperzero-gps 2 yıl önce

README.md

GPS for Flipper Zero

FAP Build

A simple Flipper Zero application for NMEA 0183 serial GPS modules.

ui

Heavy lifting (NMEA parsing) provided by minmea.

Installation

  1. Navigate to the FAP Build GitHub action workflow, and select the most recent run.
  2. The FAP is built for both the dev and release channels of the official firmware. Download the artifact corresponding to your firmware version.
  3. Extract gps_nmea.fap from the ZIP file to apps/GPIO on your Flipper Zero SD card.

Usage

This is a single-screen app, and a few interactions are provided via the hardware buttons:

  • Long press the up button to change the baud rate. The default baud rate is 9600, but 4800, 19200, 38400, 57600, and 115200 baud are also supported.
  • Long press the right button to change speed units from knots to kilometers per hour.
  • Press the OK button to set the backlight to always on mode. Press it again to disable.
  • Long press the back button to exit the app.

Hardware Setup

Connect the GPS module to power and the USART using GPIO pins 9 (3.3V), 11 (GND), 13 (TX), and 14 (RX), as appropriate.

wiring

See the tutorial video from Lab401 by RocketGod for a visual guide to the hardware setup.

Confirmed Compatible Modules

If you have verified this application working with a module not listed here, please submit a PR adding it to the list.

Building

This application can be compiled using uFBT. Run ufbt in the root directory of the repository.