Inicio Explorar Axuda
Iniciar sesión
torambo.com
/
Momentum-Apps
2
0
Fork 0
Ficheiros Incidencias 0 Pull Requests 0 Wiki
Árbore: 59513b05ee
Ramas Etiquetas
Momentum-Apps
/
wiki
/
Testing.md

Testing.md 3.4 KB
Histórico Raw

Bootloader testcase

  1. # Clean flash
  2. make -C bootloader flash # Load bootloader
  3. # reboot device
    • Press right
    • Press left
    • Wait 0.1 s
    • Release left
    • Release right
  4. Wait 0.5 s
  5. # Expect no FW
    • Expect: no uart welcome message
    • Expect: red led on
    • Expect: no USB
  6. # reboot device and go to DFU
    • Press left
    • Press right
    • Wait 0.1 s
    • Release left
    • Wait 0.5 s
    • Release right
  7. Wait 0.5 s
  8. # Expect DFU
    • Expect: blue led on
    • Expect: USB: DFU
  9. target_f2/deploy-dfu.sh # load FW
  10. # reboot device
    • Press right
    • Press left
    • Wait 0.1 s
    • Release left
    • Release right
  11. Wait 0.5 s
  12. # Expect FW
    • Expect: uart welcome message
    • Expect: USB Flipper CDC

Input testcase

  1. docker-compose exec dev make -C target_f2 example_input_dump
  2. Flash
  3. For x in [ (Up, "00"), (Down, "01"), (Right, "02"), (Left, "03"), (Ok, "04"), (Back, "05"), ] * Press ${x[0]} * wait 0.05 * Expect: Uart: "event: ${x[1]} pressed" * wait 0.05 * Release ${x[0]} * wait 0.05 * Expect: Uart: "event: ${x[1]} released" * wait 0.05 TODO: add debouncing check (multiple press and check there is no multiple events) # General building testcase Local target: * docker-compose exec dev make -C firmware TARGET=local APP_TEST=1 clean * docker-compose exec dev make -C firmware TARGET=local APP_TEST=1 run * check tests pass/fail * docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_BLINK=1 run * GPIO on and off * docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_UART_WRITE=1 run * GPIO on/off and counter: % writes * docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_IPC=1 run * ASCII display draw * docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_INPUT_DUMP=1 run not implemented * docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_QRCODE=1 run * Some writes to display * docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_DISPLAY=1 run * Some writes to display * docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_FATFS=1 flash * TODO: FatFs emulation and test not implemented F2 target: * docker-compose exec dev make -C firmware TARGET=f2 APP_TEST=1 clean * docker-compose exec dev make -C firmware TARGET=f2 APP_TEST=1 flash * check UART for test pass/fail * docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_BLINK=1 flash * Red LED blink (1s period) * docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_UART_WRITE=1 flash * Red LED shortly blinking, counter: % writes to UART * docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_IPC=1 flash * ASCII display draw in UART * docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_INPUT_DUMP=1 flash * Press all buttons, state and event writes to UART * docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_QRCODE=1 flash * QR code show on the screen * docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_DISPLAY=1 flash * Hello world show on the screen * docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_FATFS=1 flash * Init sd card error on the screen * Insert SD-card * Reboot * Show file list on the screen * Scroll by pressing up and down