Momentum-Apps/lib/ST25RFAL002/include/rfal_nfcf.h

/******************************************************************************
  * \attention
  *
  * <h2><center>&copy; COPYRIGHT 2020 STMicroelectronics</center></h2>
  *
  * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        www.st.com/myliberty
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
  * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
******************************************************************************/

/*
 *      PROJECT:   ST25R391x firmware
 *      Revision:
 *      LANGUAGE:  ISO C99
 */

/*! \file rfal_nfcf.h
 *
 *  \author Gustavo Patricio
 *
 *  \brief Implementation of NFC-F Poller (FeliCa PCD) device
 *
 *  The definitions and helpers methods provided by this module are 
 *  aligned with NFC-F (FeliCa - JIS X6319-4)
 *  
 *  
 * \addtogroup RFAL
 * @{
 *
 * \addtogroup RFAL-AL
 * \brief RFAL Abstraction Layer
 * @{
 *
 * \addtogroup NFC-F
 * \brief RFAL NFC-F Module
 * @{  
 *  
 */

#ifndef RFAL_NFCF_H
#define RFAL_NFCF_H

/*
 ******************************************************************************
 * INCLUDES
 ******************************************************************************
 */
#include "platform.h"
#include "st_errno.h"
#include "rfal_rf.h"

/*
 ******************************************************************************
 * GLOBAL DEFINES
 ******************************************************************************
 */

#define RFAL_NFCF_NFCID2_LEN 8U /*!< NFCID2 (FeliCa IDm) length                        */
#define RFAL_NFCF_SENSF_RES_LEN_MIN 16U /*!< SENSF_RES minimum length                          */
#define RFAL_NFCF_SENSF_RES_LEN_MAX 18U /*!< SENSF_RES maximum length                          */
#define RFAL_NFCF_SENSF_RES_PAD0_LEN 2U /*!< SENSF_RES PAD0 length                             */
#define RFAL_NFCF_SENSF_RES_PAD1_LEN 2U /*!< SENSF_RES PAD1 length                             */
#define RFAL_NFCF_SENSF_RES_RD_LEN 2U /*!< SENSF_RES Request Data length                     */
#define RFAL_NFCF_SENSF_RES_BYTE1 1U /*!< SENSF_RES first byte value                        */
#define RFAL_NFCF_SENSF_SC_LEN 2U /*!< Felica SENSF_REQ System Code length               */
#define RFAL_NFCF_SENSF_PARAMS_SC1_POS 0U /*!< System Code byte1 position in the SENSF_REQ       */
#define RFAL_NFCF_SENSF_PARAMS_SC2_POS 1U /*!< System Code byte2 position in the SENSF_REQ       */
#define RFAL_NFCF_SENSF_PARAMS_RC_POS 2U /*!< Request Code position in the SENSF_REQ            */
#define RFAL_NFCF_SENSF_PARAMS_TSN_POS 3U /*!< Time Slot Number position in the SENSF_REQ        */
#define RFAL_NFCF_POLL_MAXCARDS 16U /*!< Max number slots/cards 16                         */

#define RFAL_NFCF_CMD_POS 0U /*!< Command/Responce code length                      */
#define RFAL_NFCF_CMD_LEN 1U /*!< Command/Responce code length                      */
#define RFAL_NFCF_LENGTH_LEN 1U /*!< LEN field length                                  */
#define RFAL_NFCF_HEADER_LEN (RFAL_NFCF_LENGTH_LEN + RFAL_NFCF_CMD_LEN) /*!< Header length*/

#define RFAL_NFCF_SENSF_NFCID2_BYTE1_POS \
    0U /*!< NFCID2 byte1 position                             */
#define RFAL_NFCF_SENSF_NFCID2_BYTE2_POS \
    1U /*!< NFCID2 byte2 position                             */

#define RFAL_NFCF_SENSF_NFCID2_PROT_TYPE_LEN \
    2U /*!< NFCID2 length for byte 1 and byte 2 indicating NFC-DEP or T3T support */
#define RFAL_NFCF_SENSF_NFCID2_BYTE1_NFCDEP \
    0x01U /*!< NFCID2 byte1 NFC-DEP support            Digital 1.0 Table 44 */
#define RFAL_NFCF_SENSF_NFCID2_BYTE2_NFCDEP \
    0xFEU /*!< NFCID2 byte2 NFC-DEP support            Digital 1.0 Table 44 */

#define RFAL_NFCF_SYSTEMCODE \
    0xFFFFU /*!< SENSF_RES Default System Code            Digital 1.0 6.6.1.1 */

#define RFAL_NFCF_BLOCK_LEN \
    16U /*!< NFCF T3T Block size                        T3T 1.0  4.1      */
#define RFAL_NFCF_CHECKUPDATE_RES_ST1_POS \
    9U /*!< Check|Update Res Status Flag 1 position    T3T 1.0  Table 8  */
#define RFAL_NFCF_CHECKUPDATE_RES_ST2_POS \
    10U /*!< Check|Update Res Status Flag 2 position    T3T 1.0  Table 8  */
#define RFAL_NFCF_CHECKUPDATE_RES_NOB_POS \
    11U /*!< Check|Update Res Number of Blocks position T3T 1.0  Table 8  */

#define RFAL_NFCF_STATUS_FLAG_SUCCESS \
    0x00U /*!< Check response Number of Blocks position   T3T 1.0  Table 11 */
#define RFAL_NFCF_STATUS_FLAG_ERROR \
    0xFFU /*!< Check response Number of Blocks position   T3T 1.0  Table 11 */

#define RFAL_NFCF_BLOCKLISTELEM_LEN \
    0x80U /*!< Block List Element Length bit (2|3 bytes)      T3T 1.0 5.6.1 */

#define RFAL_NFCF_SERVICECODE_RDONLY \
    0x000BU /*!< NDEF Service Code as Read-Only                 T3T 1.0 7.2.1 */
#define RFAL_NFCF_SERVICECODE_RDWR \
    0x0009U /*!< NDEF Service Code as Read and Write            T3T 1.0 7.2.1 */

/*! NFC-F Felica command set   JIS X6319-4  9.1 */
enum {
    RFAL_NFCF_CMD_POLLING =
        0x00, /*!< SENSF_REQ (Felica Poll/REQC command to identify a card )       */
    RFAL_NFCF_CMD_POLLING_RES =
        0x01, /*!< SENSF_RES (Felica Poll/REQC command response )                 */
    RFAL_NFCF_CMD_REQUEST_SERVICE =
        0x02, /*!< verify the existence of Area and Service                       */
    RFAL_NFCF_CMD_REQUEST_RESPONSE =
        0x04, /*!< verify the existence of a card                                 */
    RFAL_NFCF_CMD_READ_WITHOUT_ENCRYPTION =
        0x06, /*!< read Block Data from a Service that requires no authentication */
    RFAL_NFCF_CMD_READ_WITHOUT_ENCRYPTION_RES =
        0x07, /*!< read Block Data response from a Service with no authentication */
    RFAL_NFCF_CMD_WRITE_WITHOUT_ENCRYPTION =
        0x08, /*!< write Block Data to a Service that requires no authentication  */
    RFAL_NFCF_CMD_WRITE_WITHOUT_ENCRYPTION_RES =
        0x09, /*!< write Block Data response to a Service with no authentication  */
    RFAL_NFCF_CMD_REQUEST_SYSTEM_CODE =
        0x0c, /*!< acquire the System Code registered to a card                   */
    RFAL_NFCF_CMD_AUTHENTICATION1 =
        0x10, /*!< authenticate a card                                            */
    RFAL_NFCF_CMD_AUTHENTICATION2 =
        0x12, /*!< allow a card to authenticate a Reader/Writer                   */
    RFAL_NFCF_CMD_READ =
        0x14, /*!< read Block Data from a Service that requires authentication    */
    RFAL_NFCF_CMD_WRITE =
        0x16, /*!< write Block Data to a Service that requires authentication     */
};

/*
 ******************************************************************************
 * GLOBAL MACROS
 ******************************************************************************
 */

/*! Checks if the given NFC-F device indicates NFC-DEP support */
#define rfalNfcfIsNfcDepSupported(dev)                                                     \
    ((((rfalNfcfListenDevice*)(dev))->sensfRes.NFCID2[RFAL_NFCF_SENSF_NFCID2_BYTE1_POS] == \
      RFAL_NFCF_SENSF_NFCID2_BYTE1_NFCDEP) &&                                              \
     (((rfalNfcfListenDevice*)(dev))->sensfRes.NFCID2[RFAL_NFCF_SENSF_NFCID2_BYTE2_POS] == \
      RFAL_NFCF_SENSF_NFCID2_BYTE2_NFCDEP))

/*
******************************************************************************
* GLOBAL TYPES
******************************************************************************
*/

/*! NFC-F SENSF_RES format  Digital 1.1  8.6.2 */
typedef struct {
    uint8_t CMD; /*!< Command Code: 01h  */
    uint8_t NFCID2[RFAL_NFCF_NFCID2_LEN]; /*!< NFCID2             */
    uint8_t PAD0[RFAL_NFCF_SENSF_RES_PAD0_LEN]; /*!< PAD0               */
    uint8_t PAD1[RFAL_NFCF_SENSF_RES_PAD1_LEN]; /*!< PAD1               */
    uint8_t MRTIcheck; /*!< MRTIcheck          */
    uint8_t MRTIupdate; /*!< MRTIupdate         */
    uint8_t PAD2; /*!< PAD2               */
    uint8_t RD[RFAL_NFCF_SENSF_RES_RD_LEN]; /*!< Request Data       */
} rfalNfcfSensfRes;

/*! NFC-F poller device (PCD) struct  */
typedef struct {
    uint8_t NFCID2[RFAL_NFCF_NFCID2_LEN]; /*!< NFCID2             */
} rfalNfcfPollDevice;

/*! NFC-F listener device (PICC) struct  */
typedef struct {
    uint8_t sensfResLen; /*!< SENF_RES length    */
    rfalNfcfSensfRes sensfRes; /*!< SENF_RES           */
} rfalNfcfListenDevice;

typedef uint16_t rfalNfcfServ; /*!< NFC-F Service Code */

/*! NFC-F Block List Element (2 or 3 bytes element)       T3T 1.0 5.6.1 */
typedef struct {
    uint8_t conf; /*!<  Access Mode | Serv Code List Order */
    uint16_t blockNum; /*!<  Block Number                       */
} rfalNfcfBlockListElem;

/*! Check Update Service list and Block list parameter */
typedef struct {
    uint8_t numServ; /*!< Number of Services */
    rfalNfcfServ* servList; /*!< Service Code List  */
    uint8_t numBlock; /*!< Number of Blocks   */
    rfalNfcfBlockListElem* blockList; /*!< Block Number List  */
} rfalNfcfServBlockListParam;

/*
******************************************************************************
* GLOBAL FUNCTION PROTOTYPES
******************************************************************************
*/

/*! 
 *****************************************************************************
 * \brief  Initialize NFC-F Poller mode
 *  
 * This methods configures RFAL RF layer to perform as a 
 * NFC-F Poller/RW (FeliCa PCD) including all default timings
 * 
 * \param[in]  bitRate      : NFC-F bitrate to be initialize (212 or 424)
 *
 * \return ERR_WRONG_STATE  : RFAL not initialized or mode not set
 * \return ERR_PARAM        : Incorrect bitrate
 * \return ERR_NONE         : No error
 *****************************************************************************
 */
ReturnCode rfalNfcfPollerInitialize(rfalBitRate bitRate);

/*! 
 *****************************************************************************
 *  \brief NFC-F Poller Check Presence
 *  
 *  This function sends a Poll/SENSF command according to NFC Activity spec
 *  It detects if a NCF-F device is within range
 * 
 * \return ERR_WRONG_STATE  : RFAL not initialized or incorrect mode
 * \return ERR_PARAM        : Invalid parameters
 * \return ERR_IO           : Generic internal error 
 * \return ERR_CRC          : CRC error detected
 * \return ERR_FRAMING      : Framing error detected
 * \return ERR_PROTO        : Protocol error detected
 * \return ERR_TIMEOUT      : Timeout error, no listener device detected
 * \return ERR_NONE         : No error and some NFC-F device was detected
 *
 *****************************************************************************
 */
ReturnCode rfalNfcfPollerCheckPresence(void);

/*! 
 *****************************************************************************
 * \brief NFC-F Poller Poll
 * 
 * This function sends to all PICCs in field the POLL command with the given
 * number of slots.
 *
 * \param[in]  slots      : the number of slots to be performed
 * \param[in]  sysCode    : as given in FeliCa poll command  
 * \param[in]  reqCode    : FeliCa communication parameters
 * \param[out] cardList   : Parameter of type rfalFeliCaPollRes which will hold the cards found
 * \param[out] devCnt     : actual number of cards found
 * \param[out] collisions : number of collisions encountered
 *
 * \warning the list cardList has to be as big as the number of slots for the Poll
 *
 * \return ERR_WRONG_STATE  : RFAL not initialized or incorrect mode
 * \return ERR_PARAM        : Invalid parameters
 * \return ERR_IO           : Generic internal error 
 * \return ERR_CRC          : CRC error detected
 * \return ERR_FRAMING      : Framing error detected
 * \return ERR_PROTO        : Protocol error detected
 * \return ERR_TIMEOUT      : Timeout error, no listener device detected
 * \return ERR_NONE         : No error and some NFC-F device was detected
 *
 *****************************************************************************
 */
ReturnCode rfalNfcfPollerPoll(
    rfalFeliCaPollSlots slots,
    uint16_t sysCode,
    uint8_t reqCode,
    rfalFeliCaPollRes* cardList,
    uint8_t* devCnt,
    uint8_t* collisions);

/*! 
 *****************************************************************************
 * \brief  NFC-F Poller Full Collision Resolution
 *  
 * Performs a full Collision resolution as defined in Activity 1.1  9.3.4
 *
 * \param[in]  compMode    : compliance mode to be performed
 * \param[in]  devLimit    : device limit value, and size nfcaDevList
 * \param[out] nfcfDevList : NFC-F listener devices list
 * \param[out] devCnt      : Devices found counter
 *
 * \return ERR_WRONG_STATE  : RFAL not initialized or mode not set
 * \return ERR_PARAM        : Invalid parameters
 * \return ERR_IO           : Generic internal error
 * \return ERR_NONE         : No error
 *****************************************************************************
 */
ReturnCode rfalNfcfPollerCollisionResolution(
    rfalComplianceMode compMode,
    uint8_t devLimit,
    rfalNfcfListenDevice* nfcfDevList,
    uint8_t* devCnt);

/*! 
 *****************************************************************************
 * \brief  NFC-F Poller Check/Read
 *  
 * It computes a Check / Read command accoring to T3T 1.0 and JIS X6319-4 and 
 * sends it to PICC. If sucessfully, the rxBuf will contain the the number of 
 * blocks in the first byte followed by the blocks data.
 *
 * \param[in]  nfcid2      : nfcid2 of the device
 * \param[in]  servBlock   : parameter containing the list of Services and
 *                           Blocks to be addressed by this command
 * \param[out] rxBuf       : buffer to place check/read data 
 * \param[in]  rxBufLen    : size of the rxBuf
 * \param[out] rcvdLen     : length of data placed in rxBuf
 *
 * \return ERR_WRONG_STATE  : RFAL not initialized or mode not set
 * \return ERR_PARAM        : Invalid parameters
 * \return ERR_IO           : Generic internal error
 * \return ERR_REQUEST      : The request was executed with error
 * \return ERR_NONE         : No error
 *****************************************************************************
 */
ReturnCode rfalNfcfPollerCheck(
    const uint8_t* nfcid2,
    const rfalNfcfServBlockListParam* servBlock,
    uint8_t* rxBuf,
    uint16_t rxBufLen,
    uint16_t* rcvdLen);

/*! 
 *****************************************************************************
 * \brief  NFC-F Poller Update/Write
 *  
 * It computes a Update / Write command accoring to T3T 1.0 and JIS X6319-4 and 
 * sends it to PICC.
 *
 * \param[in]  nfcid2      : nfcid2 of the device
 * \param[in]  servBlock   : parameter containing the list of Services and
 *                           Blocks to be addressed by this command
 * \param[in]  txBuf       : buffer where the request will be composed
 * \param[in]  txBufLen    : size of txBuf
 * \param[in]  blockData   : data to written on the given block(s)
 * \param[out] rxBuf       : buffer to place check/read data 
 * \param[in]  rxBufLen    : size of the rxBuf
 *
 * \return ERR_WRONG_STATE  : RFAL not initialized or mode not set
 * \return ERR_PARAM        : Invalid parameters
 * \return ERR_IO           : Generic internal error
 * \return ERR_REQUEST      : The request was executed with error
 * \return ERR_NONE         : No error
 *****************************************************************************
 */
ReturnCode rfalNfcfPollerUpdate(
    const uint8_t* nfcid2,
    const rfalNfcfServBlockListParam* servBlock,
    uint8_t* txBuf,
    uint16_t txBufLen,
    const uint8_t* blockData,
    uint8_t* rxBuf,
    uint16_t rxBufLen);

/*!
 *****************************************************************************
 * \brief NFC-F Listener is T3T Request  
 * 
 * This method checks if the given data is a valid T3T command (Read or Write) 
 * and in case a valid request has been received it may output the request's NFCID2
 * 
 * \param[in]   buf : buffer holding Initiator's received command
 * \param[in]   bufLen : length of received command in bytes
 * \param[out]  nfcid2 : pointer to where the NFCID2 may be outputed, 
 *                       nfcid2 has NFCF_SENSF_NFCID2_LEN as length
 *                       Pass NULL if output parameter not desired 
 * 
 * \return true  : Valid T3T command (Read or Write) received
 * \return false : Invalid protocol request
 * 
 *****************************************************************************
 */
bool rfalNfcfListenerIsT3TReq(const uint8_t* buf, uint16_t bufLen, uint8_t* nfcid2);

#endif /* RFAL_NFCF_H */

/**
  * @}
  *
  * @}
  *
  * @}
  */