Aaron Mavrinac
4ab2114013
FAP: API version 11.5.
|
3 лет назад | |
|---|---|---|
| .gitignore | 3 лет назад | |
| LICENSE | 3 лет назад | |
| README.md | 3 лет назад | |
| application.fam | 3 лет назад | |
| gps.c | 3 лет назад | |
| gps.fap | 3 лет назад | |
| gps_10px.png | 3 лет назад | |
| gps_uart.c | 3 лет назад | |
| gps_uart.h | 3 лет назад | |
| minmea.c | 3 лет назад | |
| minmea.h | 3 лет назад | |
| ui.png | 3 лет назад | |
| wiring.png | 3 лет назад |
README.md
GPS for Flipper Zero
A simple Flipper Zero application for NMEA 0183 serial GPS modules, such as the Adafruit Ultimate GPS Breakout.
Heavy lifting (NMEA parsing) provided by minmea, which is included in this repository.
Hardware Setup
Connect the GPS module to power and the USART using GPIO pins 9 (3.3V), 11 (GND), 13 (TX), and 14 (RX), as appropriate.
Building the FAP
- Clone the flipperzero-firmware repository.
- Create a symbolic link in
applications_usernamedgps, pointing to this repository. - Compile with
./fbt fap_gps. - Copy
build/f7-firmware-D/.extapps/gps.faptoapps/Toolson the SD card (directly or using qFlipper).
Contributing
This project was a learning exercise and is more or less "complete" from my perspective, but I will happily accept pull requests that improve and enhance the functionality for others.
Currently, the app only parses RMC and GGA sentences, and displays a subset of the data that fits on the screen. The UART is also hard-coded to 9600 baud. These limitations are largely driven by the GPS module I have to work with. A more elaborate UI with scrolling or multiple screens, as well as a configurable baud rate, may be useful for other GPS modules.